Power Distribution Unit PDU

Power Distribution Unit PDU Model TAB-DC
2012-04-24
HUAWEI Confidential
Page1, Total10
Prepare d by Reviewe d by Reviewe d by Approve d by:
Wireless Technical Sales Department
Date Date Date Date
2009-03-17
2012-04-24
HUAWEI Confidential
Page2, Total10
Contents
5.1 Engineering Specifications of the PDU...9 5.2 Electrical Specifications of the PDU...9 5.3 Surge Protection Specifications of the PDU..10
2012-04-24
HUAWEI Confidential
Page3, Total10
Figures
2012-04-24
HUAWEI Confidential
Page4, Total10
Tables
1. User Guide
2012-04-24 HUAWEI Confidential Page5, Total10
1.1 Purpose This document describes the Power Distribution Unit (PDU) Model TAB-DC in terms of its functions, structure, and technical specifications.
2. Functions of Power Distribution Unit PDU

The Power Distribution Unit provides power supply solutions to Huawei Wireless products, and it also provides DC power distribution and surge protection functions. The Power Distribution Unit (PDU) provides the following functions: Providing twelve -48 V DC outputs divided into two banks to meet multiple power distribution requirements in scenarios of distributed and separated base stations Providing twelve 10 Amp outputs (BTicino Mod F/B 10) divided into two banks to meet power distributions requirements in scenarios of distributed and separated base stations Providing surge protection through the DC surge protection unit (Atlantic Scientific Mod MA15) connected to bank A. Providing four free spaces for additional breakers units.
3. Appearance of Power Distribution Unit PDU

The
2012-04-24
HUAWEI Confidential
Page6, Total10
PDU is a 19 inch / 3U device 250A 16 way.
Figure 1 Appearance of the PDU
PDU Board.pdf
4. Principles of the PDU Model TAB-DC

This describes the power distribution principles and surge protection principles of the PDU Model TAB-DC. 4.1 Internal Structure of the PDU
Figure 2 Internal Structure of the PDU
(1) Positive copper bar (2) DC input power wiring terminal (3) DC output MCB (Breakers)
(4) DC Surge protector (5) Bank A (6) Bank B (7) Ground Terminal (8) Cable organizer (9) Stoppers for breakers
4.2 Power Distribution Principles of the PDU Model TAB-DC The power distribution principles of the PDU are as follows: The input (+) power is led into the PDU Model TAB-DC through the input terminal 35mm and then divided into 12 outputs through the copper bar to supply power to power consumption devices. The input (-) power is led into the PDU Model TAB-DC directly through the breakers The grounding of the PDU Model TAB-DC is implemented through the XXX grounding screw. For further information about breakers:
IT B icino M T btdin..pdf
4.3 Surge Protection Principle of the PDU Model TAB-DC The surge protector principle of the PDU is as follow: The surge protector unit provides protection to Bank A where NodeB and RRU are connected. For further information about surge protector:
ASC-MA15.pdf
5. Technical Specifications of the PDU Model TAB-DC

The technical specifications of the PDU consist of the engineering specifications, electrical specifications and surge protection specifications. 5.1 Engineering Specifications of the PDU This describes the engineering specifications of the PDU in terms of the weight, dimensions, and installation modes.
Table 1 Engineering specifications of the DCDU-03 Item Weight Dimensions (width x height x depth) Installation mode Specification 2.2 kg 483 mm 133 mm 140 mm Remarks -
In a 19-inch rack The PDU Model TAB-DC is installed in a space 19-inch space; the space for the two mounting ears is included into the board. The panel of the PDU occupies 3 unit racks.
Protection class Working temperature
IP20 -40C to +70C
5.2 Electrical Specifications of the PDU The electrical specifications of the PDU consists of the DC input characteristics and DC output characteristics.
Table 2 Electrical specifications of the DPU Item DC Sub-Item Rated input voltage -48 V DC
HUAWEI Confidential
Specification
Remarks Page9, Total10
2012-04-24
Item input
Sub-Item
Specification
Remarks -
Input voltage range -38.4 V DC to -57 V DC Maximum input current 250 A -48 V DC -38.4 V DC to -57 V DC 10 A Over current protection and short-circuiting protection enabled for the Bank A outputs
DC output
Rated output voltage Output voltage range Output MCB configurations Output protection
5.3 Surge Protection Specifications of the PDU The PDU provides surge protection for the DC input power. Table 3 Surge protection specifications of the DCDU-03 Item Surge protection class Specification Protection requirement (8/20 s): 18 KA Maximum leakage current: <0.3 mA Maximum continuous operating current: 15A Maximum attenuation (typical): -55dB@100MHz Weight: 100gr Dimensions (w,d,h): 79mm x 25mm x 93mm
2012-04-24
HUAWEI Confidential
Page10, Total10

Power Distribution Unit PDU

Uploaded by

Copyright:

Available Formats

Power Distribution Unit PDU

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Power Distribution Unit PDU

Uploaded by

Copyright:

Available Formats

Power Distribution Unit PDU Model TAB-DC