Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Manlift Checklist

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Here is a standard manlift inspection Checklist Pre-shift Inspection

(The Manlift operator must complete this form at the beginning of each shift)

Date __________ Manlift # __________ Hour Meter __________ Inspection OK Not OK Basic inspection (from ground): manufacturers manual (in place) platform/railing (bent, worn, damaged, locking pins) tires (worn, air, separating, missing bolts) fire extinguisher ( fully charged, sealed) horn (operational, load enough) restraining device (good repair, secure) hydraulic fluid ( platform down) hoses (good repair) Internal combustion equipment: propane tank (date, leak, secure) gas cap (secure) engine oil (check with engine off) radiator (do not check if hot) hydraulic fluid ( platform down) hoses and belts (good repair) battery (tight connections, cell levels) Battery powered equipment: cables and connections (tight) cell levels (above plates) plugging control (smooth operation) Basic inspection (on manlift): Brake pin & linkage brake (firm, stops smoothly) steering (smooth operation) leaks (under manlift) hydraulic controls (smooth operation) hydraulic functions (up/down) directional controls (smooth operation) N/A Explanation

Inspected by: ________________ Supervisor: ___________________

You might also like