Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 239 views

    M1568BS

    Uploaded by

    Den Cakra
    The M1568BS is an x-band magnetron designed for radar systems with a fixed frequency range between 9380-9440MHz and a maximum output power of 25kW. It has a minimum peak anode current of 6A and maximum of 8A, operates at pulse durations between 0.05-10us, and has a maximum anode temperature of 110°C. The magnetron requires a heater voltage of 7.0-8.0V and preheat time of 8-8.5 seconds to reach its peak output power.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    M1568BS

    Uploaded by

    Den Cakra
    239 views2 pages
    The M1568BS is an x-band magnetron designed for radar systems with a fixed frequency range between 9380-9440MHz and a maximum output power of 25kW. It has a minimum peak anode current of 6A and maximum of 8A, operates at pulse durations between 0.05-10us, and has a maximum anode temperature of 110°C. The magnetron requires a heater voltage of 7.0-8.0V and preheat time of 8-8.5 seconds to reach its peak output power.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The M1568BS is an x-band magnetron designed for radar systems with a fixed frequency range between 9380-9440MHz and a maximum output power of 25kW. It has a minimum peak anode current of 6A and maximum of 8A, operates at pulse durations between 0.05-10us, and has a maximum anode temperature of 110°C. The magnetron requires a heater voltage of 7.0-8.0V and preheat time of 8-8.5 seconds to reach its peak output power.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    239 views2 pages

    M1568BS

    Uploaded by

    Den Cakra
    The M1568BS is an x-band magnetron designed for radar systems with a fixed frequency range between 9380-9440MHz and a maximum output power of 25kW. It has a minimum peak anode current of 6A and maximum of 8A, operates at pulse durations between 0.05-10us, and has a maximum anode temperature of 110°C. The magnetron requires a heater voltage of 7.0-8.0V and preheat time of 8-8.5 seconds to reach its peak output power.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    Technical Information Rev.

    M1568BS
    X-Band Magnetron
    M1568BS is designed for the magnetron of x-band radar system. The frequency range is fixed <93809440MHz> and the peak output power is 25kW.

    MAXIMUM RATINGS
    Min Peak anode current Peak anode power input Duty cycle Pulse duration Rate of rise of voltage pulse Anode temperature 6.0 0.05 Max 10 75 0.001 1.2 90 110 1.5:1 Unit A kW s kV/s -

    V.S.W.R at the output coupler

    ELECTRICAL
    Min Heater voltage (Note 1) Preheat time Peak anode voltage (Note 2) Peak output power (Note 2) Frequency (Note 2) 7.0 120 7.2 22.5 9380 Typical 7.5 8.0 25 9410 Max 8.0 8.5 9440 Unit V S kV kW MHz

    Note 1: Measured with heater voltage of 7.5V and no anode input power, the heater current 1imits are 0.43A minimum, 0.6A maximum. For average pulse input powers greater than 25 watts the heater voltage must be reduced within 3 seconds after the application of h. t. according to the following schedule: Heater Voltage : Ef = 7.5 1 Pi :Input Power (Average)[W]

    Pi [V] 87

    Note 2: Measured at peak anode current 8.0A 1-1,Fukuoka 2-chome, Fujimino-city Saitama-prefecture 356-8510 Japan Phone:049-278-1298 Fax :049-278-1419

    Technical Information Rev.5


    Note 3: Any overshoot of the anode current is not acceptable. The impedance of this magnetron is the same as current magnetron excluding the transient impedance. This means that the additional reactance should be required for adjustment the anode current wave form, if this magnetron will be installed into the similar modulator circuit as before.

    1-1,Fukuoka 2-chome, Fujimino-city Saitama-prefecture 356-8510 Japan

    Phone:049-278-1298 Fax :049-278-1419

    You might also like