IS Codes

PGD
PROGRAMME OF WORK (As on 1 April 2012)
Production & General Engineering Department (PGD)
B U R E A U O F I N DI A N S T A N D A R D S MANAK BHWAN, 9 BAHADUR SHAH ZAFAR MARG New Delhi 110002
PREFACE A Programme of Work is prepared every year for each Division of Bureau of Indian Standards to indicate the latest position of published Indian Standards and draft standards at different stages of processing. The Programme of Work for Production and General Engineering Division Council (PGDC) has been prepared Sectional Committee-wise as on 1 April 2008 and arranged in the sequential order of the Committee numbers. The present scope of Production and General Engineering Division Council (PGDC) is as under: Production engineering and general engineering such as engineering drawings, screw threads, fasteners, transmission devices, weights and measures, engineering metrology, ergonomics, bearings and tribology, gears, horology, machine tools, hand tools, cutting tools, pneumatic tools, fluid power systems, meteorological instruments, mountaineering equipment, arms & ammunition for civilian use, industrial engineering, automation in manufacturing and robotics and consumer products & allied equipment. In the Programme of Work, an asterisk mark (*) given before a printed standard indicates that the standard is under revision and its relevant document is available at different stages of processing; whereas, double asterisk mark (**) indicates standard identified for revision for which document is yet to be prepared. Below the designation of a published standard, wherever /ISO/IEC.. standard number is given , it implies that the Indian Standard is the total adoption of ISO/IEC standard under dual numbering scheme (The designations such as IS/ISO 9001:2000 also indicate dual number standards). Below the designation of a published standard, wherever |ISO/IEC standard number is given, it implies that the Indian Standard is technically equivalent to ISO/IEC standard. It is hoped that this publication will provide the community of standards users a convenient tool for obtaining the latest information about new and upcoming standards in the field of Production and General Engineering Division Council (PGDC). For further information, please write to:
HEAD (PRODUCTION AND GENERAL ENGINEERING DEPARTMENT) BUREAU OF INDIAN STANDARDS MANAK BHAVAN, 9 BAHADUR SHAH ZAFAR MARG NEW DELHI 110 002 Ph: 011-23234819 Fax: 011-23234819 E-Mail: PGD@bis.org.in , hPGD@bis.org.in Web site: www.bis.org.in
PRODUCTION AND GENERAL ENGINEERING DEPARTMENT CONTENTS COMMITTEE WISE PROGRAMME OF WORK OF PRODUCTION AND GENERAL ENGINEERING DIVISION COUNCIL (PGDC) Sl. No. 1. 2. 3. 4. 5. 6. 7. 8. 9. Statistics at a glance Basic Standards Sectional Committee, PGD 01 Machine Tool Elements and Holding Devices Sectional Committee, PGD 02 Machine Tools Sectional Committee, PGD 03 Metal Forming Machines Sectional Committee, PGD 04 Pneumatic Tools Sectional Committee, PGD 08 Abrasives Sectional Committee, PGD 09 Bearing Sectional Committee, PGD 13 Consumer Products and Allied Equipments Sectional Committee, PGD 14 Title Page No.
4 5 8 15 26 33 36 42 48 52 53 65
10. Ergonomics Sectional Committee, PGD 15 11. Fluid Power Sectional Committee, PGD 16 12. Fluid Power Fittings, Hoses and Hose Assemblies Sectional Committee, PGD 17 13. Industrial and Production Automation Systems and Robotics Sectional Committee, PGD 18 14. Lubricating Equipment Sectional Committee, PGD 19 15. Engineering Standards Sectional Committee, PGD 20 16. Meteorological Instruments Sectional Committee, PGD 21 17. Educational Instruments and Equipment Sectional Committee, PGD 22
71
74 77 82 85
Sl. No.
Title
Page No.
18. Horology Sectional Committee, PGD 23 19. Drawing Sectional Committee, PGD 24 20. Engineering Metrology Sectional Committee, PGD 25 21. Weights and Measures Sectional Committee, PGD 26 22. Mountaineering Equipment Sectional Committee, PGD 27 23. Arms and Ammunition for Civilian Use Sectional Committee, PGD 28 24. Bolts, Nuts and Fasteners Accessories Sectional Committee, PGD 31 25. Cutting Tools Sectional Committee, PGD 32 26. Transmission Devices Sectional Committee, PGD 33 27. Hand Tools Sectional Committee, PGD 34 28. Annex A List of Standards Withdrawn/Superseded 29. Annex B List of IS Number and Valid Licensees Covered under Certification 30. Annex C List of Bilingual Standards
100 104 114 127 131 134 136 152 173 182 195 205 207
PRODUCTION AND GENERAL ENGINEERING DEPARTMENT STATISTICS AT A GLANCE ASPECTWISE POSITION OF STANDARDS ASPECT OF STANDARD PRODUCT METHODS OF TEST CODES OF PRACTICE TERMINOLOGY DIMENSIONS SYMBOLS OTHERS TOTAL HARMONIZATION POSITION TYPE OF HARMONIZATION INDIAN STANDARDS UNDER DUAL NUMBER (IDENTICAL WITH ISO OR IEC STANDARDS) INDIAN STANDARDS TECHNICALLY EQUIVALENT WITH ISO OR IEC STANDARDS INDIAN STANDARDS HARMONIZED WITH EN STANDARDS/REGULATIONS/DIRECTIVES INDIAN STANDARDS HARMONIZED WITH STANDARDS OF OTHER BODIES (OIML) TOTAL NUMBER OF STANDARDS 559 107 666 NUMBER OF STANDARDS 1439 137 11 74 233 21 146 2061
STANDARDS PUBLISHED UNDER VARIOUS SECTORS (AS PER ISO) SECTOR HEALTH, SAFETY AND ENVIRONMENT ENGINEERING TECHNOLOGIES ELECTRONICS, INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS TRANSPORT AND DISTRIBUTION OF GOODS AGRICULTURE AND FOOD TECHNOLOGY MATERIALS TECHNOLOGIES CONSTRUCTION SPECIAL TECHNOLOGIES TOTAL NUMBER OF STANDARDS 16 2045 Nil Nil Nil Nil Nil Nil 2061
PGD 01
BASIC STANDARDS SECTIONAL COMMITTEE
SCOPE: a) Formulation of Indian Standards on terminology, units, quantities, symbols and other basic subjects of general applicability to all Division Councils. b) Formulation of Indian Standards for preferred numbers. c) Coordination of work with: i) ISO/TC 12 Quantities, units, symbols, conversion tables ii) ISO/TC 19 Preferred numbers iii) ISO/TC 37 Terminology iv) ISO/TC 145 Graphical symbols, and v) ISO/CS Related to enclosures and conditions for testing CORRESPONDING ISO COMMITTEE(S): ISO/TC 12 Quantities, units, symbols, conversion tables ISO/TC 19 Preferred numbers ISO/TC 37 Terminology ISO/TC 145 Graphical symbols ISO/ CS Related to enclosures and conditions for testing SL.NO IS NO./DOC NO. TITLE REAFFIRM NO.OF AMEND MENTS
STANDARDS PUBLISHED 1. IS/ISO/IEC Guide 51:2005
Guidelines for the inclusion of safety Dec 2011 aspects in standards (first revision) Atmospheric conditions for testing (revised) Dec 2011
2. 3.
IS 196:1966 IS 786:1967
Conversion factors and conversion tables Jan 2011 (first revision) (English Hindi) Supplement to Indian Standard Jan 2011 Conversion factors and conversion tables (first revision) (English Hindi) Guide for conversion of values from one Jan 2011 system of units to another Preferred numbers: Part 1 Series preferred numbers (second revision) of Jan 2011
4.
IS 786(Supplement): 1967
5.
IS 787:1956
6.
IS 1076(PT 1):1985 /ISO 3:1973 IS 1076(PT 2):1985 /ISO 17:1973
7.
Preferred numbers: Part 2 Guide to the use Jan 2011 of preferred numbers and series of preferred numbers (second revision)
*INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS 5
SL.NO
IS NO./DOC NO.
TITLE
REAFFIRM NO.OF AMEND MENTS
8.
IS 1076(PT 3):1985 /ISO 497:1973
Preferred numbers : Part 3 Guide to the Jan 2011 choice of series of preferred number and of series containing more rounded values of preferred numbers (second revision) Method for precise conversion of inch and Jan 2011 metric dimensions to ensure interchangeability Quantities and units : Part 0 General Jan 2011 principles (first revision) Quantities and units : Part 1 Space and time Jan 2011 (third revision) Quantities and units : Part 2 Periodic and Jan 2011 related phenomena (second revision) Quantities and units : Part 3 Mechanics Jan 2011 (second revision) Quantities and units : Part 4 Heat (second Jan 2011 revision) Quantities and units : Part 5 Electricity and Jan 2011 magnetism (first revision) Quantities and units : Part 6 Light and Dec 2011 related electromagnetic radiations (first revision) Quantities and units: Part 7 Acoustics (first Dec 2011 revision) Quantities and units : Part 8 Physical Jan 2011 chemistry and molecular physics (first revision) Quantities and units : Part 9 Atomic and Jan 2011 nuclear physics (first revision) 1
9.
IS 1105:1957
10.
IS 1890(PT 0):1995 /ISO 31-0:1992 IS 1890(PT 1):1995 /ISO 31-1:1992 IS 1890(PT 2):1995 /ISO 31-2:1992 IS 1890(PT 3):1995 /ISO 31-3:1992 IS 1890(PT 4):2001 /ISO 31-4:1992 IS 1890(PT 5):1995 /ISO 31-5:1992 IS 1890(PT 6):1997 /ISO 31-6:1992
11.
12.
13.
14.
15.
16.
17.
**IS 1890(PT 7):1995 /ISO 31-7:1992 IS 1890(PT 8):1995 /ISO 31-8:1992
18.
19.
IS 1890(PT 9):1995 /ISO 31-9:1992
Sl.No.
IS NO./DOC NO.
20.
IS 1890(PT 10):1995 /ISO 31-10:1992
REAFFIRM NO.OF AMEND MENTS Quantities and units : Part 10 Nuclear Jan 2011 reactions and ionizing radiations (first revision) Quantities and units : Part 11 Mathematical signs and symbols for use in the physical sciences and technology (second revision) Jan 2011
TITLE
21.
IS 1890(PT 11):1995 /ISO 31-11:1992
22.
**IS 1890(PT 12):1995 /ISO 31-12:1992 IS 1890(PT 13):1997 /ISO 31-13:1992 IS 10005:1994 /ISO 1000:1992
Quantities and units : Part 12 Characteristic Dec 2011 numbers (first revision) Quantities and units : Part 13 Solid state Dec 2011 physics (first revision) SI units and recommendations for the use of their multiples and of certain other units (second revision) Development and Principles for application of public information symbols Graphic symbols Test methods for judged comprehensibility and for comprehension Public information symbols Jan 2011
23.
24.
25.
IS 15502:2005 /ISO/TR 7239:1984 IS 15503:2004 /ISO 9186:2001 IS 15504:2005 /ISO 7001:1990 SP 8:1970
Jan 2011
26.
Mar 2009
27.
Jan 2011
28.
ISI Handbook of mathematical, physical, chemical and engineering tables
Jan 2011
DOCUMENT UNDER WIDE CIRCULATION PGD 01(1132) PGD 01(1133) Conditioning and testing -- Standard atmospheres Definitions Graphical symbols -- Technical guidelines for the consideration of consumers' needs
DRAFT STANDARDS COMPLETED WIDE CIRCULATION Doc: BP 01(0542) Dimension and of raised parts of ground surface indicators for blind persons
*INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS
PGD 02
MACHINE TOOL ELEMENTS AND HOLDING DEVICES SECTIONAL COMMITTEE
SCOPE: a) Standardization in the field of basic machine tool elements, jigs and fixtures b) Co-ordination of work with: i) ISO/TC 39/SC 8 Work holding spindles and chucks ii) ISO/TC 29 Small Tools CORRESPONDING ISO COMMITTEE(S): ISO/TC 39/SC 8 Work Holding Spindles and Chuck ISO/TC 29 Small Tools SL. No. IS NO./DOC NO. TITLE REAFFIRM NO. OF AMEND MENTS
STANDARDS PUBLISHED 1. IS 666(Pt 1):1972 Jig bushes Part 1: Headed and headless jig bushes (second revision) Jig bushes Part 2: Renewable drill bushes (second revision) Overall internal heights for lathe tool posts (first revision) T-slots Dimensions and spacing (third revision) T-bolts Specification (second revision) T-nuts (first revision) Coolant pumps for general purpose machine tools Specification (first revision) Drill chucks (first revision) 60 degree dead centers for lathes (first revision) Dec 2007 1
2.
IS 666(Pt 2):1972
Dec 2007
3.
IS 1995:1984 /ISO 213:1982 IS 2013:1995 |ISO 299:1987 ** ** IS 2014:1996 IS 2015:1977 IS 2161:1996
Aug 2011
4.
Aug 2011
5. 6. 7.
Aug 2011 Aug 2011 Aug 2011 1
8. 9.
IS 2243:1971 IS 2289:1976
Aug 2011 Aug 2011
10.
**
IS 2534:1999
Carbide tipped dead centers Specification Feb 2010 (first revision)
SL. No. 11.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
IS 2582(Pt 1):1987 /ISO 702-1:1975
Machine tools Spindle noses and face plates Sizes for interchangeability Part 1: Type A (second revision) Machine tools Spindle noses and face plates Sizes for interchangeability Part 2: Camlock types (second revision) Machine tools Spindle noses and face plates Sizes for interchangeability Part 3: Bayonet type (second revision) Palm grips Specification (first revision) Dimensions for ball grips 3-jaw and 4-jaw scroll manually operated self-centering lathe chucks Specification (second revision) Taper handles for machine tools (first revision) Ball handles Specification (first revision) Hand cranks Specification (first revision) Star grips Specification (first revision) Control levers with ball grips Specification (first revision) Tenons (first revision) Set collars (first revision) Mounting dimensions of plain grinding wheels by means of hub flanges (second revision) Dimensions for hand wheels
Aug 2011
12.
IS 2582(Pt 2):1987 /ISO 702-2:1975
Aug 2011
13.
IS 2582(Pt 3): 1987 /ISO 702-3:1975
Aug 2011
14. 15. 16. **
IS 2804:1998 IS 2805:1964 IS 2876:1999
Oct 2008 Aug 2011 Aug 2011
17.
IS 2890:1983
Aug 2011
18. 19. 20. 21.
IS 2904:1998 IS 2908:1998 IS 2909:1998 IS 2975:1998
Oct 2008 Dec 2007 Dec 2007 Oct 2008
22. 23. 24.
IS 2990:1986 IS 2995:1988 IS 2996:1986
Aug 2011 Feb 2010 Aug 2011
25.
IS 3048:1965
Aug 2011
SL. No.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS 2
26.
IS 3075(Pt 1):1986
Dimensions for circlips Part 1: For shafts (first revision) Dimensions for circlips Part 2: For bores (first revision) Dimensions for circlips Part 3: Type E for shafts (first revision) Live centers Goose neck clamps (second revision) C-washers Specification (first revision) Strap clamps (first revision) U-type clamps (second revision) Jig buttons (first revision) Locking dogs (catches) with springs (first revision) Spherical washers and conical seats Specification (first revision) Swing C-washers Specification (second revision) Jig feet (first revision) Machine vices Specification (first revision) Permanent magnetic chucks (second revision) Dimensions for circular base plates
Aug 2011
27.
IS 3075(Pt 2):1986
Aug 2011
28.
IS 3075(Pt 3):1987
Aug 2011
29. 30. 31. 32. 33. 34. 35.
IS 3793:1966 IS 4279:1984 IS 4291:1996 IS 4292:1984 IS 4293:1984 IS 4294:1982 IS 4295:1983
Dec 2007 Aug 2011 Aug 2011 Aug 2011 Aug 2011 Aug 2011 Aug 2011
36.
IS 4297:1996
Aug 2011
37.
IS 4298: 2009
Aug 2011
38. 39.
IS 4299:1982 IS 4502:1999
Aug 2011 Mar 2010
40.
IS 4816:1987
Aug 2011
41.
IS 5091:1969
Aug 2011
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
42.
IS 5092:1969
Dimensions for square and rectangular base plates Locating pins (round) Specification (first revision) Dimensions for diamond locating pins End locating plugs Specification (first revision) Dimensions for round locating studs Dimensions for diamond locating studs Swing clamps (first revision) Table clamps (first revision) Wide clamp plates (first revision) Parallel sided clamp plates (first revision) Swing lathes (first revision) Double ended clamps (first revision) Plain clamps (first revision) Slotted clamps (first revision) Cam operated clamps (first revision) Feed fingers Spring collets Knurled thumb nuts (fixtures)
Aug 2011
43.
IS 5093:1996
Aug 2011
44. 45.
IS 5094:1969 IS 5095:1998
Aug 2011 Oct 2008
46. 47. 48. 49. 50. 51. 52. 53. 54. 55. 56. 57. 58. 59. 60.
IS 5096:1969 IS 5097:1969 IS 5250:1984 IS 5251:1984 IS 5252:1984 IS 5998:1984 IS 5999:1999 IS 6080:1985 IS 6081:1985 IS 6082:1985 IS 6090:1984 IS 6105:1971 IS 6238:1971 IS 6335:1971 IS 6336:1989
Aug 2011 Aug 2011 Aug 2011 Aug 2011 Aug 2011 Aug 2011 Aug 2011 Aug 2011 Aug 2011 Aug 2011 Aug 2011 Aug 2011 Aug 2011 Aug 2011
1 1
Screws for thrust pads (fixtures) Feb 2010 Specification (first revision) *INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS 11
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
61.
IS 6337:1989
Thrust pads (fixtures) Specification (first revision) Clamping screws (fixtures) Specification (first revision) Quick action drilling jigs (first revision) Turning mandrels Specification (first revision) Grinding mandrels Hexagon nuts with collar Specification (first revision) Quick change drill chucks, collets and floating reamer holders Specification (first revision) Electro-magnetic chucks Drill chuck taper arbors Part 1: Having taper shanks Oil sight glass for machine tools Clamp buttons to be used with parallel sided clamp plates Floor plates 4-jaw independent lathe chucks Cam levers Jig feet with cylindrical shanks Adjustable clamp support
Feb 2010
62.
IS 6338:1989
Feb 2010
63. 64.
IS 6440:1997 IS 7262:1996
Dec 2007 Aug 2011
65. 66.
IS 7301:1974 IS 7795: 2004
Aug 2011 Aug 2011
67.
IS 7824:1995
Aug 2011
68. 69.
IS 8710:1978 IS 9094(Pt 1): 1979
Aug 2011 Aug 2011
70. 71.
IS 10573:1983 IS 10574:1983
Aug 2011 Aug 2011
72. 73. 74. 75. 76.
IS 10602:1983 IS 10612:1983 IS 10882:1984 IS 11278:1985 IS 11325:1985
Aug 2011 Aug 2011 Aug 2011 Aug 2011 Aug 2011
77. IS 11613:1986 Renewable lock screw locating pins Aug 2011 *INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS 12
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
78. 79. 80. 81. 82. 83. 84.
IS 11614:1986 IS 11831:1986 IS 11843:1986 IS 12242:1987 IS 12250:1987 IS 12280:1988 IS 12281:1988
Renewable threaded locating pins Jig foot bolt Jig foot nut Door hinges for machine tools Fixed clamp supports Tenon without counterbore Mounting dimensions of machine tool doors with hinges Snap rings - Specification Tommy screws with fixed bars Specification Clamping studs for machine tools Specification 2-jaw and 3-jaw power operated wedge type chucks Specification 2-jaw and 3-jaw power operated high speed lathe chucks with through bore Specification 2-jaw and 3-jaw hand operated heavy duty cam type self centering chucks Specification
Aug 2011 Aug 2011 Aug 2011 Aug 2011 Aug 2011 Dec 2007 Dec 2007
85. 86.
IS 12525:1989 IS 12582:1989
Feb 2010 Feb 2010
87.
IS 13178:1991
Aug 2011
88.
**
IS 14693:1999
Aug 2011
89.
**
IS 14694:1999
Aug 2011
90.
**
IS 14725:1999
Aug 2011
91.
IS 14872(Pt 1): 2000 Ball screws Part 1: Vocabulary and /ISO 3408-1:1991 designations IS 14872(Pt 2):2000 /ISO 3408-2:1991 Ball screws Part 2: Nominal diameters and nominal leads metric series
Dec 2007
92.
Dec 2007
13
SL. NO. 93.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
IS 14872(Pt 3):2000 /ISO 3408-3:1992 IS 15246:2002 /ISO 9524:1993
Ball screws Part 3: Acceptance conditions and acceptance tests Machine tools Front faces of spindle holders for machining centers Functional dimensions 7/24 Tapers for tool shanks for automatic changing Tapers for spindle noses Self centering chucks for machine tools with two piece jaws (tongue and groove type) Sizes for interchangeability and acceptance test specifications Machine tools Jaw mountings on power chucks
Dec 2007
94.
Dec 2007
95
IS 15247:2002 /ISO 9270:1992 IS 15248:2002 /ISO 3442:1991
Dec 2007
96
Dec 2007
97
IS 15249:2002 /ISO 9401:1991
Dec 2007
PGD 03 MACHINE TOOLS SECTIONAL COMMITTEE SCOPE: a) Standardization in the field of basic machine tools (Excluding: elements and holding devices of machine tools standards), modular units, evaluation of all machine tools for the working of metal, wood and plastics, operating by removal of material. b) Co-ordination of work with: i) ISO/TC 39 Machine Tools ii) ISO/TC 39/SC 2 Test conditions for metal cutting machines tool iii) ISO/TC 39/SC 4 Woodworking machines iv) ISO/TC 39/SC 6 Noise of machine tools v) ISO/TC 199 Safety of machinery CORRESPONDING ISO COMMITTEE(S): ISO/TC 39/SC 8 Machine Tools ISO/TC 39/SC 2 Test Conditions for Metal Cutting Machines Tools ISO/TC 39/SC 4 Woodworking Machines ISO/TC 39/SC 6 Noise of Machine Tools and ISO/TC 199 Safety of Machinery SL. NO. IS NO./DOC NO. TITLE REAFFIRM NO. OF AMEND MENTS
STANDARDS PUBLISHED 1. IS 1878(Pt 1): 1993 |ISO 1708:1989
Test chart for general purposes parallel lathes Part 1: Lathes with swing over bed up to 800mm (second revision) Test chart for general purposes parallel lathes Part 2: Lathes with swing over bed over 800mm and up to 1600mm (second revision) Test chart for general purposes parallel lathes Part 3: Lathes with swing over bed over 1600mm and upto 2500mm Acceptance code for machine tools Part 1: Geometric accuracy of machines operating under no-load or finishing conditions (second revision)
Oct 2008
2.
IS 1878(Pt 2): 1992 |ISO 1708:1989
Oct 2008
3.
IS 1878(Pt 3): 1998
Oct 2008
4.
IS 2063(Pt 1): 2002 /ISO 230-1:1996
Oct 2008
Acceptance code for machine tools Part Oct 2008 2: Determination of accuracy and repeatability of positioning numerically controlled axes *INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS 15
5.
IS 2063(Pt 2):2002 /ISO 230-2:1997
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
6.
IS 2182:1993
Symbols to be given on indication plates Oct 2008 of machine tools Recommendations (first revision) Radial drilling machines Test chart (first revision) Test condition for milling machines with table of variable height Testing of accuracy Part 2: Machines with horizontal spindle (third revision) Test condition for milling machines with table of variable height Testing of accuracy Part 3: Machines with vertical spindle Speeds and feeds for machine tools (first revision) Test chart for slotting machines (first revision) Test chart for shaping machines (first revision) Test chart for box type vertical drilling machines (first revision) Test chart for external cylindrical grinding machines with a movable table (second revision) Test chart for pillar type vertical drilling machines (first revision) Test chart for bench drilling machines (first revision) Test chart for bench grinders Feb 2010
7.
IS 2199:1989
8.
IS 2200 (Pt 2): 2002 /ISO 1701-2:1997
Oct 2008
9.
IS 2200 (Pt 3): 2002 /ISO 1701-3:1997
Oct 2008
10.
IS 2218:1999
Feb 2010
11.
IS 2308:1989
Feb 2010
12.
IS 2310:1989
Feb 2010
13.
IS 2367:1981
Oct 2008
14.
IS 2368:1993 /ISO 2433:1984
Oct 2008
15.
IS 2425:1982 |ISO 2773-1:1973 IS 2426:1985 |ISO 2773-1:1973 IS 2538:1963
Feb 2010
16.
Dec 2006
17.
Oct 2008
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
18.
IS 2743:1992 /ISO 1986:1985
Test chart for surface grinding machines with horizontal grinding wheel spindle and reciprocating table (second revision) Test chart for single and double column planing machines (second revision) Direction of operation of controls for machine tools Recommendations (second revision) Test chart for universal tool and cutter grinders Test chart for power backsaw machines (up to 300mm round bar capacity) Woodworking machines Table band sawing machines Nomenclature and acceptance conditions (second revision) Test chart for woodworking turning lathes (second revision)
Oct 2008
19.
IS 2877:1986
Dec 2006
20.
IS 2987:1992 /ISO 447:1984
Oct 2008
21.
IS 3080:1965
Dec 2006
22.
IS 3405:1966
Dec 2006
23.
IS 3691:1990 /ISO 7007:1983
Dec 2006
24.
IS 3694:1991 /ISO 7987:1985
Dec 2006
25.
IS 6040:1993 |ISO 1708:1989
Test chart for precision lathes Lathes Dec 2006 with swing over bed up to 500mm and distance between centers up to 1500mm (first revision) Test chart for vertical boring and turning mills with table diameter up to 1600mm Dec 2006 1
26.
IS 6197:1971
27.
Test chart for general purpose gear Dec 2006 1 shaping machines (Table diameter up to 1000mm) *INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS 17
IS 6679:1972
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
28.
IS 6893(Pt 1):1988
Proforma for purchase specification for machine tools Part 1: General purpose parallel lathes and precision lathes (first revision)
Dec 2006
29.
IS 6893(Pt 2):1987
Proforma for purchase specification Dec 2006 for machine tools Part 2: Horizontal/universal knee-type milling machines (first revision) Proforma for purchase specification for machine tools Part 3: Radial drilling machines (first revision) Proforma for purchase specification for machine tools Part 4: Vertical turning and boring lathes (first revision) Proforma for purchase specification for machine tools Part 5: Milling machines with table of variable height with vertical spindle (first revision) Proforma for purchase specification for machine tools Part 6: Bench/Pillar type drilling machines Proforma for purchase specification for machine tools Part 7: External cylindrical grinding machines with horizontal spindle Proforma for purchase specification for machine tools Part 8: Internal cylindrical grinding machines with horizontal spindle Dec 2006
30.
IS 6893(Pt 3):1988
31.
IS 6893(Pt 4):1987
Dec 2006
32.
IS 6893(Pt 5):1987
Dec 2006
33.
IS 6893(Pt 6):1985
Dec 2006
34.
IS 6893(Pt 7):1990
Oct 2008
35.
IS 6893(Pt 8):1992
Oct 2008
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
36.
IS 6893(Pt 9):1990
Proforma for purchase specification for machine tools Part 9: Surface grinders with horizontal axis Proforma for purchase specification for machine tools Part 10: Copying lathes Proforma for purchase specification for machine tools Part 11: Capstan and turret lathes Proforma for purchase specification for machine tools Part 12: Horizontal boring and milling machines (Table type) Recommended diameters of wheels for woodworking table band sawing machines
Dec 2006
37.
IS 6893(Pt 10):1992
Oct 2008
38.
IS 6893(Pt 11):1992
Oct 2008
39.
IS 6893(Pt 12):1992
Oct 2008
40.
IS 7227:1974
Aug 2005
41.
IS 7228:1983 /ISO 7006:1981
Recommended spindle diameters for Aug 2005 woodworking machines with rotating bored tools (first revision) Recommended working level heights for woodworking machines Woodworking machines Thickness planing machines with rotary cutter blocks of one side dressing Nomenclature and acceptance conditions (first revision) Woodworking machines Single spindle moulding machines Nomenclature and acceptance conditions (first revision) Aug 2005 1
42.
IS 7229:1974
43.
IS 7249:1993 /ISO 7568:1986
Oct 2008
44.
IS 7258:1990 /ISO 7009:1983
Aug 2005
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
45.
IS 7266:1991 /ISO 7946:1985 IS 7267:1991 /ISO 7571:1986
Test chart for woodworking slot mortising machines (first revision) Test chart for woodworking surface planing machines with cutterblock for one-side dressing (first revision) Test chart for woodworking single spindle boring machines (first revision) Test chart for woodworking single chain mortising machines (first revision) Recommended working dimensions for woodworking machines Test chart for woodworking planing machines for two, three or four side dressing (first revision) Woodworking machines Single blade circular saw benches with or without traveling table Nomenclature and acceptance conditions (first revision) Test chart for woodworking surface planing and thickness machines (first revision) Sizes of collars for circular saw blades for woodworking machines Woodworking machines Routing machines Nomenclature and acceptance condition (first revision)
Dec 2006
46.
Dec 2006
47.
IS 7279:1992 /ISO 7945:1985
Dec 2006
48.
IS 7286:1991 /ISO 7950:1985
Dec 2006
49.
IS 7287:1974
Aug 2005
50.
IS 7289:1992 /ISO 7569:1986
Oct 2008
51.
IS 7294:1990 /ISO 7008:1983
Oct 2008
52.
IS 7296:1992 /ISO 7570:1986
Oct 2008
53.
IS 8099:1976
Feb 2010
54.
IS 8107:1993 /ISO 7948:1987
Oct 2008
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
55.
IS 8131:1976
Test chart for circular tables for machines tools (Table diameter upto 630mm) Acceptance conditions of mechanical dividing heads for machine tools Testing of accuracy (first revision) Acceptance conditions for gear hobbing Testing of accuracy (first revision) Safety conditions for woodworking machines Recommendations (first revision)
Dec 2006
56.
IS 8165:2010/ ISO 5734: 1986
Dec 2006
57.
IS 8407:2010/ ISO 6545: 1992
58.
IS 8964:1999
Feb 2010
59.
IS 9474:1980
Principles of mechanical guarding of Dec 2006 machinery Dimensions for modular units for Oct 2008 machine tool construction-slide units Dimensions for modular units for machine tool construction-multispindle heads-casing and input drive shaft dimensions Dimensions for modular units for machine tool construction-head stock Test chart for crankshaft grinding machines Dimensions for modular units for machine tool construction-wing bases for columns Oct 2008
60.
IS 9722:1981 |ISO 2562:1973 IS 9723:1981 |ISO 2912:1973
61.
62.
IS 9737:1981 |ISO 2727:1973
Oct 2008
63.
IS 9809:1981 |ISO 2433:1973 IS 10188:1982 |ISO 2934:1973
Oct 2008
64.
Feb 2010
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
65.
IS 10190:1982 |ISO 1708:1979
Test chart for copying lathes with horizontal spindle-lathes with swing over bed up to 500mm and distance between centers up to 1500mm Test chart for internal cylindrical grinding machines with horizontal spindle (first revision) Dimensions for modular units for machine tool constructions Rotary tables Dimensions for modular units for machine tool construction Wing bases for slide units Sizes for dovetail guide ways for machine tools Code of practice for painting procedure for machine tools Method of measuring noise from machine tools (Excluding testing in anechoic chambers) Glossary of terms relating to woodworking machines General safety requirements for machine tools and their operation Dimensions for modular units for machine tool construction - Columns
Dec 2006
66.
IS 10352:1992 /ISO 2407:1984
Oct 2008
67.
IS 10575:1983 |ISO 3371:1975
Feb 2010
68.
IS 10576:1983 |ISO 2769:1973
Feb 2010
69.
IS 10941:1984
Feb 2010
70.
IS 10949:1984
Dec 2006
71.
IS 10988:1984
Feb 2010
72.
IS 11011:1984
Dec 2006
73.
IS 11016:1984
Feb 2010
74.
IS 11107:1984 |ISO 3589:1975 IS 11118:1997
Dec 2006
75.
Guidelines for technical evaluation of Dec 2006 general purpose parallel lathes (first revision)
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
76.
IS 11133:1984 |ISO 5169:1977
Recommendations for symbols for lubrications appearing on machine tools
Feb 2010
77.
IS 11398(Pt 1):1985 |ISO 6155-1:1981
Test chart for horizontal spindle Dec 2006 capstan, turret and single spindle automatic lathes Part 1: Machinable bar diameters greater than 25mm Test chart for horizontal spindle Feb 2010 capstan, turret and single spindle automatic lathes Part 2: Machinable bar dia. 25mm or less and chuck dia. up to 160mm Nomenclature for modular machine tools Dec 2006
78.
IS 11398(Pt 2):1992 /ISO 6155-2:1986
79.
IS 11648:1986
80.
IS 11846:1987 |ISO 3476:1975
Dimensions for modular units for Dec 2006 machine tool construction Tennon drive and flanges for mounting multispindle heads Test chart for boring and milling machines with horizontal spindle Part 1: Table type machines Test chart for boring and milling machines with horizontal spindle Part 2: Floor type machines Dimensions for modular units for machine tool construction Spindle units Dec 2006
81.
IS 11958(Pt 1):1987 |ISO 3070-1:1987
82.
IS 11958(Pt 2):1992 /ISO 3070-2:1978
Oct 2008
83.
IS 12106:1987 |ISO 3590:1976
Dec 2006
84.
Test chart for external cylindrical Oct 2008 centreless grinding machines Testing of the accuracy (first revision) 85. IS12296:1988 Test chart for thread rolling machines Oct 2008 with cylindrical dies *INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS 23
IS 12295:2000 /ISO 3875:1990
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
86.
IS 12850:1987 /ISO 3610:1976 IS 13543:1992 /ISO 2891:1977
Modular units for machine tool construction Support brackets Modular units for machine tool construction Centre bases and columns Test chart for surface grinding machines with vertical grinding wheel spindle and reciprocating table General introduction for milling machines with table of variable height with horizontal or vertical spindle Numerical control of machines Symbols General introduction for milling machines with table of fixed height with horizontal or vertical spindle Test chart for surface grinding machines with two columns for grinding slideways Test chart for universal milling machine with a swivelling table Test condition for machining centers Part 1: Geometric tests for machines with horizontal spindle and with accessory heads (Horizontal Z-axis) Machine tools Lubrication systems
Dec 2006
87.
Oct 2008
88.
IS 13552:1992 /ISO 1985:1985
Oct 2008
89.
IS 13634:1993 /ISO 1701:1984
Oct 2008
90.
IS 13635:1993 /ISO 2972:1979 IS 13640:1993 /ISO 1984:1984
Oct 2008
91.
Oct 2008
92.
IS 13934:1994 /ISO 4703:1984
Feb 2010
93.
IS 13993:1994 |ISO 1701:1974 IS 15250(Part 1):2002 /ISO 10791-1:1998
Feb 2010
94.
Oct 2008
95. 96.
IS/ISO 5170:1977 IS/ISO 7572:1984
Dec 2006
Conditions of acceptance and Dec 2006 installation for work holding fixed tables of machine tools *INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS 24
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
97.
IS/ISO 8636-1:1987
Test chart for plano milling machines Part 1: Portal type Machine Tools Chip bins for Chip Conveyor
Dec 2006
98.
IS 15649:2006
DRAFT STANDARDS UNDER PRINTING PGD 03(1037) Test conditions for boring and milling machines with horizontal spindle -- Testing of the accuracy -- Part 2: Table-type machines {(First revision of IS 11958(Part 1)} (PRESENTLY WITHELD)
25
PGD 04
METAL FORMING MACHINES SECTIONAL COMMITTEE
SCOPE: a) Standardization in the field of various technical aspects of metal forming machines both by hot and cold processes and their machines (Presses, press brakes shears, shear blades, moulds, forging machines, nibs and dies for wire and tube drawing operations etc. and their related toolings). b) Co-ordination of work with: i) ISO/TC 29/SC 8 Tools for pressing and moulding ii) ISO/TC 39 Machine tools CORRESPONDING ISO COMMITTEE(S): ISO/TC 29/SC 8 Tools for Pressing and Moulding ISO/TC 39 Machine tools SL. NO. IS NO./DOC NO. TITLE REAFFIRM NO. OF AMEND MENTS
STANDARDS PUBLISHED 1. IS 2515:1978 Test chart for guillotine shears (first revision) Tools for pressing - Round punches with 60 conical head and straight shank (first revision) Tools for pressing Round punches with cylindrical head and reduced shank Tools for pressing - Round punches with cylindrical head and straight shank Tool for pressing Round punches with 60 conical head and reduced shank (first revision) Mar 2011
2. * * 3. * * 4.
IS 4296(Part 1):2002 /ISO 6752:1984
Oct 2008
IS 4296(Part 2):2002 /ISO 8020:1992
Oct 2008
IS 4296(Part 3):2002 /ISO 8021:1986
Oct 2008
5. * * 6.
IS 4296(Part 4):2002 /ISO 9181:1990
Oct 2008
IS 4592:2002 /ISO 6899:1984
Acceptance condition of open front Oct 2008 mechanical power presses Testing of the accuracy (first revision)
26
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
7. 8.
IS 4593:1968 IS 4918:1981 |ISO 1684:1975 IS 6652(Pt 1):1986
Test chart for straight sided presses Hard metal (Carbide) wire, bar and tube drawing dies (first revision) Glossary of terms relating to metal forming machines and tools - Part 1: Metal forming tools (first revision) Glossary of terms relating to metal forming machines and tools - Part 2: Metal forming machines relating to sheet metal (first revision) Glossary of terms relating to metal forming machines and tools - Part 3: Metal forming technology and operations relating to sheet metal (first revision) Recommendation on preferred strokes for mechanical and hydraulic presses Recommendations on preferred capacities for mechanical and hydraulic presses Guide pillar for press tool die sets Specification (second revision) Bolster plates for gap frame presses without die cushion Bolster plates for gap frame presses with die cushion Method of designation of mechanical and hydraulic presses (second revision)
Mar 2011 Oct 2008
9.
Mar 2011
10.
IS 6652(Pt 2):1986
Mar 2011
11.
IS 6652(Pt 3):1986
Dec 2011
12.
IS 7468:1974
May 2010
13.
IS 7469:1974
Oct 2008
14.
IS 7664:2005
Mar 2011
15.
IS 7706:1975
Mar 2011
16.
IS 7707:1975
Mar 2011
17.
IS 8064:2002
Oct 2008
SL. NO. 18.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
IS 8127:2005
Guide bushes for press tool die sets specification (second revision) Gap frame open-front mechanical presses Capacity, ratings and dimensions (first revision) Press working die sets Boss type Part 1: Centre post rectangular die sets Press working die sets Boss type Part 2: Centre post square die sets Press working die sets Boss type Part 3: Centre post round die sets Press working die sets Boss type Part 4: Centre post reverse rectangular die sets Dimensions for sintered pellets hard metal (Carbide) for wire, bar and tube drawing dies Press working die sets (Plain type) Part 1: Centre post rectangular die sets Press working die sets (Plain type) Part 2: Centre post square die sets Press working die sets (Plain type) Part 3: Centre post round die sets Press working die sets (Plain type) Part 4: Rear post rectangular die sets Press working die sets (Plain type) Part 5: Rear post square die sets Press working die sets (Plain type) Part 6: Rear post round die sets
Mar 2011
19.
IS 8711:2002
Oct 2008
20.
IS 9266(Pt 1):1979
Mar 2011
21.
IS 9266(Pt 2):1979
Mar 2011
22.
IS 9266(Pt 3):1979
Mar 2011
23.
IS 9266(Pt 4):1990
Dec 2011
24.
IS 9888:1981 |ISO 2804:1973
Oct 2008
25.
IS 10068(Pt 1):1982
May 2010
26.
IS 10068(Pt 2):1982
May 2010
27.
IS 10068(Pt 3):1990
Dec 2011
28.
IS 10068(Pt 4):1997
Dec 2011
29.
IS 10068(Pt 5):1996
Dec 2011
30.
IS 10068(Pt 6):1996
Dec 2011
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
31.
IS 10644:1983
Recommendation for preferred shut heights for mechanical presses Pressure pins Dimensions for slide face opening for locating the shanks Dimensions for sintered carbide pellets used in heading dies Proforma for purchase specification and technical features for belt drop banners Tools for pressing and mouldingmachined plates Part 1: Machined plate for press tools jigs and fixtures (first revision) Tools for pressing and moulding machined plates Part 2: Machined plates for moulds (first revision) Recommendations on terminology of hard metal heading dies Carbide mandrels for tube drawing dies Test chart for spinning and planishing lathes Test chart for die sets Press working tools Shanks Part 1: General dimensions and survey Press working tools Shanks Part 2: Shanks to suit rivetting
May 2010
32. 33.
IS 10650:1983 IS 10731:2000
May 2010 Mar 2011
34.
IS 11344:1985
May 2010
35.
IS 11372:1985
May 2010
36.
* *
IS 11443(Part 1):2003 /ISO 6753-1:1994
Oct 2008
37.
IS 11443(Part 2):2003 /ISO 6753-2:1994
Oct 2008
38.
IS 11505:1986 /ISO 5396:1977 IS 11524:1986 /ISO 1651:1974 IS 11684:1986
May 2010
39.
Mar 2011
40.
Mar 2011
41. 42.
IS 11742:1986 IS 12665(Pt 1):1989
Mar 2011 May 2010
43.
IS 12665(Pt 2):1989
May 2010
SL. NO. 44.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
IS 12665(Pt 3):1989
Press working tools Shanks Part 3: Shanks with screwed shaft Press working tools Shanks Part 4: Shanks with neck and collar Press working tools Shanks Part 5: Shanks with square flanges Press working tools Shanks Part 6: Shanks with rectangular flanges Press working tools Shanks Part 7: Shanks with screwed shaft and collar Gap frame hydraulic presses up to 4000km Recommendation on preferred capacities and dimensions Proforma for purchase specification for plate bending machines Capacity rating and dimensions for trimming presses Recommendations on preferred capacities and dimensions for straight sided column type and four pillar type hydraulic presses Forging machines tools Glossary of terms Hydraulic presses Straight sided column/C frame type Part 1: Test chart for geometrical accuracy Hydraulic presses Straight sided column/C-frame type - Part 2: Test chart for technical (performance) evaluation of presses and press brakes
May 2010
45.
IS 12665(Pt 4):1989
May 2010
46.
IS 12665(Pt 5):1996
May 2010
47.
IS 12665(Pt 6):1996
Oct 2008
48.
IS 12665(Pt 7):1996
Dec 2006
49.
IS 12852:1989
May 2010
50.
IS 12984:1990
Mar 2011
51.
IS 14497:1997
Oct 2008
52.
IS 14757:2000
May 2010
53.
IS 14758:2000
May 2010
54.
IS 14877(Pt 1):2000
Mar 2011
55.
IS 14877(Pt 2):2002
Oct 2008
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
56. 57. **
IS 14878:2000 IS 15300:2002 /ISO 8695:1987 IS 15318:2003 /ISO 8540:1993 IS 15424(Part 1): 2004 /ISO 9182-1:1992 IS 15424(Part 2): 2004 /ISO 9182-2:1992 IS 15424(Part 3): 2004 /ISO 9182-3:1992 IS 15424(Part 4): 2004 /ISO 9182-4:1992
Test chart for plate bending machines Tools for pressing Punches Nomenclature and terminology Open front mechanical power presses Vocabulary Tools for Pressing Guide Pillers Part 1 Type Tools for Pressing Guide Pillars Part 2 Type A Straight Pillars Tools for Pressing - Guide Pillars Part 3 Type B End Locking Pillars Tools for Pressing Guide Pillars Part 4 Type C Pillars with Taper Lead and Bushes Tools for Pressing Guide Pillars Part 5 Type D End Locking Pillars with Flange Tools for Pressing Guide Bushes Part 1 Forms Tools for Pressing Guide Bushes Part 2 Form A, Gliding Bushes, Plain Type 1 Tools for Pressing Guide Bushes Part 3 Form B, Ball Cage Bushes, Plain, Type 1 Tools for Pressing Guide Bushes Part 4 Form C, Gliding Bushes, Headed, Type 1
Mar 2011 Oct 2008
58.
Oct 2008
59.
May 2010
60.
May 2010
61.
May 2010
62.
May 2010
63.
IS 15424(Part 5): 2004 /ISO 9182-5:1992
May 2010
64.
IS 15448(Part 1): 2004 /ISO 9448-1:1991 IS 15448(Part 2): 2004 /ISO 9448-2:1991
May 2010
65.
May 2010
66.
IS 15448(Part 3): 2004 /ISO 9448-3:1991
May 2010
67.
IS 15448(Part 4): 2004 /ISO 9448-4:1991
May 2010
SL. NO. 68.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
IS 15448(Part 5): 2004 /ISO 9448-5:1991
Tools for Pressing Guide Bushes Part 5 Form D, Ball Cage Bushes Headed, Type 1 Tools for Pressing Guide Bushes Part 6 Form E, Gliding Bushes, Flanged, Type 1 Tools for Pressing Guide Bushes Part 7 Form F, Ball Cage Bushes, Flanged, Type 1 Tools for Pressing Guide Bushes Part 8 Form G, Gliding Bushes, Stepped, Type 1 Tools for Pressing Guide Bushes Part 9 Form B, Ball Cage Bushes, Plain, Type 2 Tools for Pressing Guide Bushes Part 10 Form E, Gliding Bushes, Flanged, Type 2 Tools for Pressing Guide Bushes Part 11 Form F, Ball Cage Bushes, Flanged, Type 2 Angular Deflection for C Frame Mechanical Presses Specification Deflection for Straight Sided Mechanical Presses - Specification Angular Deflection of C Frame Hydraulic Presses Specification Deflection for Straight Sided Hydraulic Presses - Specification
May 2010
69.
IS 15448(Part 6): 2004 /ISO 9448-6:1991
May 2010
70.
IS 15448 (Part 7): 2004 /ISO 9448-7:1991
May 2010
71.
IS 15448 (Part 8): 2004 /ISO 9448-8:1991
May 2010
72.
IS 15448 (Part 9): 2004 /ISO 9448-9:1992
May 2010
73.
IS 15448 (Pt 10): 2004 /ISO 9448-10:1992
May 2010
74.
IS 15448 (Pt 11): 2004 /ISO 9448-11:1992
May 2010
75.
IS 15744:2007
76.
IS 15745:2007
77.
IS 15746:2007
78.
IS 15747:2007
32
PGD 08 PNEUMATIC TOOLS SECTIONAL COMMITTEE SCOPE: a) Standardization in the field of portable type pneumatic tools and accessories b) Co-ordination of work with: i) ISO/TC 118/SC 3 Pneumatic tools and machines CORRESPONDING ISO COMMITTEE: ISO/TC 118/SC 3 Pneumatic tools and Machines SL. NO. IS NO./DOC NO. TITLE REAFFIRM NO. OF AMEND MENTS
STANDARDS PUBLISHED 1. IS 5441:1986 Portable pneumatic drilling machines Dec 2011 (first revision) Dimensions for pneumatic light rivet Dec 2011 snap shanks and its chuck bushings (first revision) Dimensions for pneumatic coal pick Dec 2011 shanks and chuck bushings (first revision) Dimensions for pneumatic rivet snap Dec 2011 shanks parallel and chuck bushings (first revision) Dimensions for pneumatic breaker and Dec 2011 spade shanks and its chuck bushings (first revision) Portable pneumatic grinding machines Dec 2011 (first revision) Dimensions for chisel shanks and chuck Dec 2011 bushings for pneumatic chippers (first revision) Rock drill shanks and chuck bushings Mar 2009 Dimensions (first revision)
2.
IS 6572:1987 |ISO 1180:1983
3.
IS 6573:1987 |ISO 1180:1983
4.
IS 6574:1987 |ISO 1180:1983
5.
IS 6575:1987 |ISO 1180:1983
6.
IS 7157:1987
7.
IS 7446:1987 |ISO 1180:1983
8.
IS 7456:1994 |ISO 723:1991 IS 7605:1986
9.
Portable pneumatic chippers (first Mar 2010 revision) *INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS 33
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
10.
IS 7868:1975 |ISO 1717:1974 IS 7913:1975 |ISO 721:1974 IS 7978:1984
Rotary drill rods for drilling principally Dec 2011 in coal Integral stems for percussive drilling Dec 2011 2
11.
12.
Portable pneumatic rivet cutters (first Mar 2010 revision) Portable pneumatic riveting hammers Mar 2010 (first revision) Pneumatic concrete breaker shanks Mar 2009 Dimensions (first revision) Portable pneumatic impact wrenches (first revision) Dec 2011
13.
IS 7979:1984
14.
IS 7995:1994 |ISO 1180:1983 IS 8067:1986
15.
16.
IS 8486:1977
Code of practice for maintenance of Mar 2010 tungsten carbide tipped integral stems Pusher legs revision) Specification (first Oct 2008
17.
IS 9419:1993
18.
IS 9707:1994
Pneumatic screw drivers and nut runners Mar 2009 (Non impact type) (first revision) Portable revision) pneumatic sanders (first Dec 2011
19.
IS 9828:2001
20.
IS 10749:1983
Swivel head nut for screw type mounts Mar 2010 in pusher legs Portable pneumatic rammers Technical supply pneumatic tools conditions Dec 2011 for Dec 2011
21. 22.
IS 11183:1984 IS 11609:1986
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
23.
IS 11702(Pt 1): 1986
Measurement of airborne noise emitted by pneumatic tools and machines Part 1: Engineering method for determination of sound power levels
Aug 2005
24.
IS 11702(Pt 2): 1986
Measurement of airborne noise emitted Aug 2005 by pneumatic tools and machines Part 2: Method for checking compliance with noise limits Dimensions for shanks of punches and Dec 2011 chisels and its chuck bushing for pneumatic rivet cutter Recommendations for preferred Oct 2008 pressures for pneumatic tools and machines Dimensions for piston rods and butts for Oct 2008 pneumatic rammer tools Oct 2008 Dimensions for weld flux scalers shanks Oct 2008 and nozzle holes Rotary and percussive pneumatic tools Dec 2011 Performance test (first revision) Pneumatic tools Vocabulary and machines - Mar 2009
25.
IS 12158:1987
26.
IS 12520:1988 |ISO 5941:1979
27.
IS 12523:1988 |ISO 1180:1983 IS 12531:1988 |ISO 1180:1983 IS 12563:2001 /ISO 2787:1984 IS 12849:1989 /ISO 5391:1988 IS 13078:1991 IS 14368:1996 IS 15065:2001
28.
29.
30.
31. 32. 33.
Pneumatic hose couplings Portable pneumatic weld flux scalers
Dec 2011 Dec 2011
Carbide tips for use in integral stems for Dec 2011 percussive drilling Specification. Rotary tools for threaded fasteners Dec 2011 Performance test method
34.
IS 15411: 2003 /ISO 5393:1994
35
PGD 09
ABRASIVES SECTIONAL COMMITTEE
SCOPE: a) Standardization in the field of coated abrasives, grinding wheels and diamond/cubic boron nitride abrasive tools b) Coordination of work with: i) ISO/TC 29/SC 5 Grinding wheels, abrasives CORRESPONDING ISO COMMITTEE(S): ISO/TC 29/SC 5 Grinding Wheels, Abrasives SL. NO. IS NO./DOC NO. TITLE REAFFIRM NO. OF AMEND MENTS
STANDARDS PUBLISHED 1. * IS 551:1989
Bonded abrasive products (Other than diamond/cubic boron nitride) marking system (second revision) Coated abrasive Specification (fourth revision) Specification for valve grinding compound (first revision) Recommendations for selection of grinding wheels (second revision) Specification for Abrasive specialties (first revision) Safety requirements for the use, care and protection of abrasive grinding wheels Part 1: Definitions (second revision) Safety requirements for the use, care and protection of abrasive grinding wheels Part 2: Handling and storage (second revision) Safety requirements for the use, care and protection of abrasive grinding wheels Part 3: General machine requirements (second revision)
Jan 2010
2.
IS 715:2002
July 2007
1 1
3.
IS 1004:1980
Dec 2006
4.
IS 1249:1997
Nov 2007
5.
IS 1262:1979
Mar 2010
6.
IS 1991(Pt 1):1987
Sep 2007
7.
IS 1991(Pt 2):1987
Sep 2007
8.
IS 1991(Pt 3):1987
Sep 2007
SL NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
9.
IS 1991(Pt 4):1988
Safety requirements for the use, care and protection of abrasive grinding wheels Part 4: Safety guards (second revision) Safety requirements for the use, care and protection of abrasive grinding wheels Part 5: Flanges (second revision) Safety requirements for the use, care and protection of abrasive grinding wheels Part 6: Inspection and mounting (second revision) Safety requirements for the use, care and protection of abrasive grinding wheels Part 7: Standard speeds (second revision) Safety requirements for the use, care and protection of abrasive grinding wheels Part 8: Special speeds (second revision) Safety requirements for the use, care and protection of abrasive grinding wheels Part 9: General operating rules (second revision) Safety requirements for the use, care and protection of abrasive grinding wheels Part 10: Mounted wheels (second revision) Bonded abrasive grinding wheels Part 1: Profiles and types (second revision) Bonded abrasive grinding wheels Part 2: Dimensions (second revision)
Aug 2008
10.
IS 1991(Pt 5):1987
Sep 2007
11.
IS 1991(Pt 6):1987
Sep 2007
12.
IS 1991(Pt 7):1987
Sep 2007
13.
IS 1991(Pt 8):1987
Sep 2007
14.
IS 1991(Pt 9):1987
Sep 2007
15.
IS 1991(Pt 10):1987
Sep 2007
16.
IS 2324(Pt 1):1985
Jan 2010
17.
IS 2324(Pt 2):1985
Jan 2010
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
18.
IS 2794:1979
Specification for Truing /Dressing tools single diamond (first revision) Methods for sampling of coated abrasives Abrasive emery grain(first revision) Specification for diamond or cubic boron nitride abrasive grinding wheels (first revision) Dimensions for mounted wheel and points (first revision)
Dec 2006
19.
IS 2817:1965
Aug 2008
20. 21.
IS 3178:1996 IS 3264:1985
Dec 2006 Jan 2006 1
22.
IS 3300:1980
Dec 2006
23.
IS 5201:1969
Methods for sampling of abrasive emery Aug 2008 grain Specification for Commercial steel wool (first revision) Dimensions for depressed centre wheels Type 27 Dimensions for internal grinding wheels Sep 2007
24.
IS 5319:1987
25.
IS 8915:1978 |ISO 2933:1974 IS 9291:1979
Aug 2008
26.
Mar 2010
27.
IS 10489:1983
Specification for Steel dresser for abrasive wheels Specification for Diamond abrasive circular segmental saws Grain sizes for diamond or cubic boron nitride Part 1: Designation and grain sizes distribution
Aug 2009
28.
IS 10519:1983
Aug 2008
29.
IS 10960(Pt 1):1984
Jan 2010
38
SL. NO. 30.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
IS 10960(Pt 2):1984
Grain sizes for diamond or cubic boron nitride Part 2: Method of test of macro grits General survey, designation and nomenclature of diamond or cubic boron nitride grinding wheels and saws Specification for Razor hones Silicon carbide for bonded abrasive products Dimensions for honing stones
Jan 2010
31.
IS 10986:1984 /ISO 6104:1979
Jan 2010
32. 33.
IS 11026:1984 IS 11643 : 1985
Jan 2010 2006 1
34.
IS 12057:1987 |ISO 3920:1976 |ISO 3921:1976 IS 12099:1987
Sep 2007
35.
Specification for Triangular polishing blocks for use in floor polishing machines Abrasives Diamond or cubic boron nitride micron powder sizes - Testing Bonded abrasive products Static balancing of grinding wheels - Testing Diamond abrasive frame saw blades Marking systems of diamond/cubic boron nitride abrasive products Recommendations for selection of diamond and cubic boron nitride grinding wheels Dimensional tolerances on grinding wheels Multi point diamond impregnted dressing tool- specification
Sep 2007
36.
IS 12686:1989
Jan 2010
37.
IS 13068:1991 /ISO 6103:1986 IS 13520:1992 IS 13521:1992
Dec 2006
38. 39.
Oct 2007 Sep 2007
40.
IS 13564:1993
Mar 2008
41.
IS 13596:1993
Mar 2008
42.
IS 13998:1994
Jan 2010
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
43.
IS 14369:1996
Abrasive belts Designation, Dimensions and tolerances selection of width/length combinations Determination of magnetic matter in artificial abrasives Test methods Coated abrasives Flap wheels with shafts Dimensions and designation Coated abrasive Flap wheels with incorporated flanges or separate flanges designation and dimensions
May 2006
44.
IS 14370:1996
May 2006
45.
IS 14992:2001 /ISO 3919:1993 IS 15066:2001
Aug 2006
46.
Dec 2006
47.
IS 15287(Part 1): 2003 Coated abrasives Grain size analysis /ISO 6344-1:1998 Part 1: Grain size distribution test IS 15287(Part 2):2003 /ISO 6344-2:1998 Coated abrasive Grain Size Analysis Part 2: Determination of grain size distribution of macrogrits P12 to P 220
Mar 2008
48.
Jan 2008
49.
IS 15287(Part 3): 2003 Coated abrasive Grain Size Analysis /ISO 6344-3:1998 part 3: Determination of grain size distribution of macrogrits P240 to P 2500 IS 15288(Part 1): 2003 Bonded Abrasives Determination and /ISO 8486-1:1996 designation of grain size distribution Part 1: Macrogrits F4 to F220 IS 15288(Part 2): 2003 Bonded Abrasives Determination and /ISO 8486-2:1996 designation of grain size distribution Part 2 Microgrits F230 to F 1200. * IS 15289:2003 /ISO 9136:1989 IS 15290:2003 /ISO 9138:1993 Abrasives macrograins Determination of bulk density. Abrasives grain Sampling and Splitting.
Feb 2008
50.
Feb 2008
51.
Feb 2008
52.
Feb 2008
53.
Mar 2008
40
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
54.
IS 15297:2003 /ISO 6103:1989
Bonded abrasive products Permissible unbalances of grinding wheels as delivered Testing Machine tools Mounting of Plain grinding wheels by means of hub flanges Abrasive grains-Test sieving machine
Feb 2008
55.
IS 15299:2002 /ISO 666:1996
Dec 2007
56.
IS 15538: 2005 /ISO 9284:1992 IS 15555: 2005 /ISO 3310-3:1999
Jan 2010
57.
Test sieves-Technical requirements and testing-Test sieves of electroformed sheets
Jan 2010
DRAFT STANDARDS UNDER PRINTING PGD 09(1067) PGD 09(1068) PGD 09(1069) PGD 09(1070) PGD 09(1071) PGD 09(1024) Coated abrasives Flap discs Coated abrasives Plain sheets Coated abrasives Plain sheets with holes for dust extraction Coated abrasives Plain discs Coated abrasives- Plain discs with holes for dust extraction Bonded abrasive products Dimensions - Part 1: Grinding wheels for external cylindrical grinding between centers [third revision of IS 2324 (Part 1):1985] Bonded abrasive products Dimensions - Part 2: Grinding wheels for centreless external cylindrical grinding [third revision of IS 2324 (Part 2):1985] Bonded abrasive products Limit deviations and run-out tolerances Machine tools Mounting of grinding wheels by means of hub flanges (first revision) Bonded abrasive products General requirements (third revision)
PGD 09(1025)
PGD 09(1026) PGD 09 (1145)
PGD 09(1146)
PGD 09(1147) Coated abrasives Flap wheels with shaft (first revision) *INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS 41
PGD 13
BEARINGS SECTIONAL COMMITTEE
SCOPE: a) Formulation of standards for rolling element bearings and hydromechanic bearing (including plain, thrust bush bimetallic, hydrostatic bearing and hydro dynamic bearings etc.) b) Co-ordination of work with: i) ISO/TC 4 Rolling bearings ii) ISO/TC 123 Plain bearings CORRESPONDING ISO COMMITTEE(S): ISO/TC 4 Rolling Bearings ISO/TC 4/SC 9 Tapered rolling bearings ISO/TC 123 Plain bearings ISO/TC 123/SC 6 Plain bearings Terms and common items SL. NO. IS NO./DOC NO. TITLE REAFFIRM NO. OF AMEND MENT
STANDARDS PUBLISHED 1. ** IS 2398:1967 2. IS 2399:2002 /ISO 5593:1997 ** IS 2898:1976 |ISO 3290: 1975 IS 3090:1965
Identification code for rolling bearings Rolling bearings Vocabulary (second revision) Steel balls for rolling bearings (first revision) Code of practice for installation and maintenance of rolling bearings Rolling bearings Static load ratings (second revision) Rolling bearing - Dynamic load ratings and Rating life (second revision) Specification for Porous metal powder oil impregnated bearings (first revision) Gauging practice for rolling bearings (second revision) Specification for Needle bearings (first revision)
Mar 2011 Nov 2007
3.
Sep 2011
4.
Mar 2011
5.
**
IS 3823:1988 /ISO 76:1987 IS 3824:2002 /ISO 281:1990 IS 3980:1982
Mar 2009
6.
**
July 2007
7.
Jan 2011
8.
IS 4025:2006
Feb 2011
9.
IS 4215:1983
Mar 2011
SL No 10.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENT
IS 4216:1981
Specification for Needle cages (first revision) Specification for Needle rollers (first revision) Specification for Wrapped bushes (first revision) Rolling bearings- Plummer block housingsBoundary Dimensions (first revision) Thin walled half bearing Part 1: Plain bearings (first revision) Thin walled half bearing Part 2: Flanged bearings (first revision) General plan of boundary dimensions for radial rolling bearings (first revision) Tolerances for radial rolling bearings (first revision) Rolling bearings Thrust ball bearings Boundary dimensions, general plan (first revision) Rolling bearings Thrust ball bearings Tolerances (second revision) Rolling bearing Chamfer dimensions Maximum values Specification (first revision)
Sep 2011
11.
IS 4217:1981
Sep 2011
12.
IS 4757:1980 | ISO 3547:1976 ** IS 4773:2002 /ISO 113:1994 IS 4774(Pt 1):1982 | ISO 3548: 1978 IS 4774(Pt 2):1982
Jan 2011
13.
July 2007
14.
Jan 2011
15.
Jan 2011
16.
IS 5669:1987 /ISO 15:1981 ** IS 5692:1988 |ISO 492:1996 IS 5932:1999 /ISO 104:1999
Sep 2011
17.
Mar 2009
18.
**
Oct 2009
19.
**
IS 5933:2002 /ISO 199:1997 IS 5934:1999 /ISO 582:1979
Oct 2007
20.
Jan 2011
21.
IS 5935:1992
Radial internal clearances in unloaded radial Mar 2010 rolling bearings (first revision)
Technical supply conditions for rolling Mar 2011 1 bearings (first revision) 23. IS 6454:1972 Specification for Self aligning roller Sep 2011 1 bearings *INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS 43
22.
IS 6453:1984
SL No 24.
IS NO./DOC NO.
TITLE
REAFFIRM
IS 6455:1972
Specification for Single row radial ball bearings Specification for Double row radial ball bearings Specification for Single row cylindrical roller bearings Specification for Double row cylindrical roller bearings Rolling bearings Instrument precision bearings (first revision) Specification for Locknuts, narrow series and lockwashers with straight inner tab for rolling bearings (first revision) Tolerances for tapered roller bearings (first revision) General plan of boundary dimensions for tapered roller bearings Part 1: Single row bearings (second revision) General plan of boundary dimensions for tapered roller bearings Part 2: Double row bearings (second revision) General plan of boundary dimensions for tapered roller bearings Part 3: Flanged cups (second revision) Specification for Tapered adaptor sleeves for rolling bearings Specification for Tapered withdrawal sleeves for rolling bearings Specification for Cylindrical rollers
Sep 2011
NO. OF AMEND MENT 1
25.
IS 6456:1972
Sep 2011
26.
IS 6457:1972
Sep 2011
27.
IS 6458:1972
Sep 2011
28.
**
IS 6548:1992 /ISO 1224:1984 IS 6731:1977 | ISO 2982: 1972
Mar 2009
29.
**
Mar 2011
30.
**
IS 7460:1988 | ISO 492:1986 IS 7461(Pt 1):1993 |ISO 355:1977
Mar 2009
31.
Mar 2009
32.
IS 7461(Pt 2):1992 |ISO 355:1977
Mar 2009
33.
IS 7461(Pt 3):1992 |ISO 355:1977
Mar 2009
34.
**
IS 8656:1977 | ISO/ R 113: 1969 IS 8657:1977 | ISO/ R 113: 1969 IS 9202:1979
Sep 2011
35.
**
Sep 2011
36.
Sep 2011
SL No 37. 38.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENT
IS 9619:1980 IS 9764(Pt 1):1992 |ISO 6525:1983
Identification code for shell type needle bearings (included sealed bearings) Plain bearings Washers for plain bearings and wrapped bushes Specification Part 1: Ring type thrust washers (first revision) Plain bearings Washers for plain bearings and wrapped bushes Specification Part 1: Half thrust washers Technical supply conditions for thin walled plain bearings Terms, definitions and classification of plain bearings Part 1: Construction Terms, definitions and classification of plain bearings Part 2: Friction and wear Terms, definitions and classification of plain bearings Part 3: Lubrication Code for identification of ring type needle bearings (included sealed bearings) Definitions of tolerances for rolling bearings Plain bearings Thin- walled half-bearings Checking of peripheral length (first revision)
Sep 2011 Dec 2011
39.
**
IS 9764(Pt 2):1994 |ISO 6526:1983
Oct 2009
40.
IS 10203:1982
Dec 2011
41.
**
IS 10260(Pt 1): 1982 |ISO/DIS 4378-1 IS 10260(Pt 2):1982 |ISO/DIS 4378-2 IS 10260(Pt 3): 1982 |ISO/DIS 4378-3 IS 10648:1983
Jan 2011
42.
**
Jan 2011
43.
**
Jan 2011
44.
Mar 2011
45.
**
IS 11027:1984 /ISO 1132:1980 IS 11145:2002 /ISO 6524:1992
Mar 2011
46.
July 2007
47.
IS 11904:1999 /ISO 464:1976
Rolling bearings Radial bearings snap ring Oct 2009 Dimensions and tolerances Specification (first revision) Tapered roller bearings Rolling bearings Cylindrical rollers bearings, separate thrust collars boundary dimensions - Specification Sep 2011 Oct 2009
48. 49. **
IS 12102:1987 IS 13405:1999 /ISO 246:1995
SL No
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENT
50.
**
IS 13406:1992 /ISO 8443:1985 IS 13962:1994 /ISO 10317:1992 IS 14347:1996 IS 14478:1997
Radial ball bearings with flanged outer ring Flange dimensions Rolling bearings Metric tapered roller bearings Designation system Plumber block housing Specification Plain bearings Thick walled bushes plain and flanged type full round (without any joint or slit) Specification Rolling bearings Tape rolling bearings Tapered roller Metric series Specification (first revision) Plain bearings Hardness testing of bearing metals Part 1: Compound materials Plain bearings Hardness testing of bearing metals Part 2: Solid materials Plain bearings Part 1: Fits
Mar 2009
51.
**
May 2009
52. 53.
**
June 2011 Sep 2007
54.
IS 14691:1999
Oct 2009
55.
IS 14802(Pt 1):2000 /ISO 4384-1:1982 IS 14802(Pt 2):2000 /ISO 4384-2:1982 IS 14803(Pt 1):2000 /ISO 12129-1:1995 IS 14803(Pt 2):2000 /ISO 12129-2:1995
Jan 2011
56.
Jan 2011
57.
Jan 2011
58.
Plain bearings Part 2: Tolerances on form and position and surface roughness for shafts, flanges and thrust collars Plain bearings Multiplayer materials for thin walled plain bearings Plain bearings Thermoplastic polymers for plain bearings Classification and designation
Jan 2011
59.
IS 15620 : 2005 /ISO 4383 : 2000 IS 15624 : 2005 /ISO 6691 : 2000
Jan 2011
60.
Jan 2011
61.
Plain bearings Lubrication holes, grooves Jan 2011 and pockets Dimensions, type and designation and their application to bearing bushes *INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS
IS 15625 : 2005 /ISO 12128 : 2001
46
DRAFT STANDARDS COMPLETED WIDE CIRCULATION DOC:PGD 13/31/MGP 36(0350) Plain bearings Thin walled half bearings with or without flange Tolerances, design features and method of test (Document presently Withheld by the Committee) DOC: PGD 13 (1190) Rolling bearings Accessories Part 1: Tapered sleeves Dimensions (first revision of IS 8656) Rolling bearings Thrust bearings Tolerances (Third Revision of IS 5933)
DOC: PGD 13 (1194)
DOC: PGD 13 (1195)
Rolling bearings Instrument precision bearings Part 1: Boundary dimensions, tolerances and characteristics of metric series bearings (Second Revision IS 6548 (Part 1))
DOC: PGD 13 (1196)
Rolling bearings Instrument precision bearings Part 2: Boundary dimensions, tolerances and characteristics of inch series bearings
47
PGD 14
CONSUMER PRODUCTS AND ALLIED EQUIPMENTS SECTIONAL COMMITTEE
SCOPE : Standardization in the field of All types of a) Fasteners for Consumer Goods; b) Hair Cutting, Shaving and Shearing Equipment; c) Umbrellas & its Components, and d) Miscellaneous Consumer Products not covered under any other CORRESPONDING ISO COMMITTEE(S): NIL SL. NO. IS NO./DOC NO. TITLE
Committee.
REAFFIRM
NO. OF AMEND MENT
STANDARDS PUBLISHED 1. * IS 888:1983 * 2. IS 989:1982
Specification for Hollow-ground razors, open type (second revision) Specification for Scissors for general purposes (second revision) Specification for Umbrella ribs (first revision) Specification for Umbrella tubes, sticks and handles (first revision) Specification for Umbrella fittings (first revision) Umbrellas (first revision) Slide fasteners (general purpose) (fourth revision) Specification for Hair clippers (handoperated) Specification for Metal hooks, clips and eyes Specification for Eyelets and washers (sail) (first revision) Specification for Snap fasteners for dresses (first revision)
Dec 2010
Dec 2010
3. 4.
IS 2917:1981 IS 2918:1981
Aug 2011 Aug 2011
5.
IS 2919:1981
Aug 2011
6. 7.
IS 2920:1981 IS 3148:1991
Aug 2011 Jan 2007
8.
IS 3743:1966
July 2008
9. 10.
IS 4066:1967 IS 4084:1978
July 2008 Jan 2007 2
11.
IS 4108:1984
Jan 2007
SL . N O. 12. 13.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENT
IS 4274:1981 IS 4741:1968
Specification for Buckles (first revision) Specification for Snap fasteners (four pieces) (first revision) Specification for Safety pins Specification for Footwear and stationery eyelets (first revision) Specification for Equipment fasteners (Web equipment pattern) Specification for Staples (first revision) Specification for Staplers Specification for Clips, paper (first revision) Specification for Pins, paper, straight (first revision) Specification for Web-equipment and 6.6 mm eyelets, rim painted with or without washers (first revision) Specification for Needles, hand sewing Specification for Perforators, paper, double hole
Jan 2007 July 2008 1
14. 15.
IS 4798:1968 IS 5041:1978
July 2008 Jan 2007 2
16.
IS 5048:1969
July 2008
17. 18. 19. 20.
IS 5348:1981 IS 5349:1969 IS 5650:1988 IS 5653:1988
Jan 2007 Dec 2010 Dec 2010 Dec 2010
1 1
21.
IS 6021:1978
Jan 2007
22. 23.
IS 6321:1971 IS 6421:1972
July 2008 July 2008
1 1
24.
IS 6422:1972
Specification for Perforator, paper, single hole July 2008 (Docket punch) Specification for Razors, safety (Hindi English) Specification for Stainless steel safety razor blades (second revision) July 2008 3
25.
IS 7370:1974
26.
IS 7371:1982
Jan 2007
SL No
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENT
27.
IS 7671:1975
Specification for Fastener, file, flexible-prong type Specification for Fastener, file, loose-leaf, ring type Fasteners for consumer goods Synthetic hook and loop tape - Specification (second revision) Specification for Fasteners, arch and clip for files Part 1 Arch fasteners (first revision) Specification for Fasteners, arch and clip for files Part 2 Clip fasteners (first revision) Specification for Clips, paper, spring type
Dec 2010
28.
IS 7672:1975
Dec 2010
29.
IS 8156:1994
Dec 2010
30.
IS 8227(Pt 1):1988
Dec 2010
31.
IS 8227(Pt 2):1988
Dec 2010
32.
IS 8231:1976
Dec 2010
33.
IS 8247:1976
Specification for Fastener, paper, prong type, with washer Specification for Tags for files (first revision)
Dec 2010
34. 35. 36.
IS 8499:1988 IS 8738:1978 IS 8739:1978
Dec 2010
Specification for Parachute buckles, D-shaped Jan 2007 Specification for Adaptor, adjustable, buckle waist Specification for Buckles, pack, outer, PTRM Specification for Connecting lug, quick release, adjustable, PTRM Specification for Adaptor, main, PTRM Specification for Snap hook, with safety device (PTR-R) Specification for Snap hook (Static line) Jan 2007
37. 38.
IS 8740:1978 IS 8741:1978
Jan 2007 Jan 2007
39. 40.
IS 8742:1978 IS 9547:1980
Jan 2007 Jan 2007
41.
IS 9548:1980
Jan 2007
SL. NO. 42.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENT
IS 9719:1981
Specification for Button, press, lift the dot, cloth to metal Specification for Button, press, lift the dot, cloth to wood Specification for Button, press, lift the dot, cloth to cloth Specification for Metallic slide fasteners (for aviation purposes) Specification for Carbon steel, safety razor blades Umbrella ribs, folding, manual Glossary of terms relating to slide fasteners Shaving systems Twin blades cartridges Specification
Jan 2007
43.
IS 9720:1981
Jan 2007
44.
IS 9721:1981
Jan 2007
45.
IS 9748:1981
Jan 2007
46.
IS 10198: 1982
Dec 2010
47. 48. 49.
IS 10675: 1981 IS 10844: 1984 IS 13031: 1990
Aug 2011 Jan 2007 Jan 2007 2
50.
IS 13777: 1993
Shaving systems Twin blade razor handles July 2008 Specification Shaving systems Disposable razors Specification Synthetic (plastic) slide fasteners Special purpose Part 1: Specification, selection and ordering guideline of the product (first revision) Synthetic (plastic) slide fasteners Special purpose Part 2: Test and measurement methods Synthetic (plastic) slide fasteners Special purpose Part 3: Test report formats Shaving systems Cases for barbers tools Specification Dec 2010
51.
IS 13973: 1994
52.
IS 14181(Part 1): 2002
May 2007
53.
IS 14181(Part 2): 2002
May 2007
54. 55.
IS 14181(Part 3): 2002 IS 14232: 1995
May 2007 Jan 2007
PGD 15 SCOPE:
ERGONOMICS SECIONAL COMMITTEE
a) Standardization is the field of ergonomics including terminology,technology, methodology and human and other factors related to ergonomics common to all the sphere of life. b) Co-ordination of work with: i) ISO/TC 159 Ergonomics
CORRESPONDING ISO COMMITTEE(S): ISO/TC 159 Ergonomics SL. NO. IS NO./DOC NO. TITLE REAFFIRM NO. OF AMEND MENT
STANDARDS PUBLISHED 1. IS 13214:1991 /ISO/DIS 7250 IS 15257:2002 /ISO 1503: 1977 IS 15836 (Part 1): 2008 /ISO 15534-1: 2000 Machine tools Ergonomics Anthropometric Terminology Geometrical orientation and directions of movements Ergonomics design for the safety of machinery Part1 Principles for determining the dimensions required for opening for whole body access into machinery. Ergonomics design for the safety of machinery Part2 Principles for determining the dimensions required for access opening Dec 2011
2.
Dec 2009
3.
4.
IS 15836 (Part 2): 2008 /ISO 15534-2: 2000
IS 15836 (Part 3): Ergonomics design for the safety of 2008 machinery Part3 Anthropometric data /ISO 15534-3: 2000 DRAFT STANDARDS COMPLETED WIDE CIRCULATION PGD 15(0547) Basic Human Body Measurement for technological design PGD 15(0548) Safety of machinery- Anthropometric requirement for the designs of work stations at machinery General requirements for Anthropometric data bases Principles for selecting and using test persons for testing Anthropometric aspects of industrial products and design
5.
PGD 15(0549) PGD 15(0551)
PGD 16 FLUID POWER SECTIONAL COMMITTEE SCOPE: a) Standardization in the field of terminology, classifications, symbols, fluid logic, and fluid properties, contamination control, components marking systems and identification codes, sealing devices and their related parameters; hydraulic components and their testing, maintenance and installations; pneumatic components and their testing, installation and maintenance. b) Liaison with: i) ISO/TC 131 Fluid power systems ii) ISO/TC 131/SC 1 Terminology, and symbols iii) ISO/TC 131/SC 2 Pumps, motors and integral transmissions iv) ISO/TC 131/SC 3 Cylinders v) ISO/TC 131/SC 5 Control products and components vi) ISO/TC 131/SC 6 Contamination control vii) ISO/TC 131/SC 8 Product testing and viii) ISO/TC 131/SC 9 Installations and systems CORRESPONDING ISO COMMITTEE(S): ISO/TC 131 Fluid Power Systems, ISO/TC 131/WG 1 Accumulators, ISO/TC 131/SC 1 Terminology, Classification and Symbols, ISO/TC 131/SC 1/ WG 1 Graphic Symbols, ISO/TC 131/SC 1/ WG 2 Terminology, ISO/TC 131/SC 1/ WG 3 Circuit diagrams, ISO/TC 131/SC 6 Contamination control and ISO/TC 131/SC 2 Pumps, Motors and Integral Transmissions ISO/TC 131/SC 3 Cylinders, ISO/TC 131/SC 3/WG 1 Hydraulic Cylinder Mounting Dimensions, ISO/TC 131/SC 5 Control products and components ISO/TC 131/SC 5/WG 2 Hydraulic Control Products, ISO/TC 131/SC 5/WG 3 Pneumatic Control Products ISO/TC 131/SC 8 Product testing ISO/TC 131/SC 8/WG 10 Method of test for electrohydraulic proportional control valves ISO/TC 131/SC 8/WG 11 Pressure rating ISO/TC 131/SC 8/WG 12 Electronically controlled hydraulic pumps ISO/TC 131/SC 2 Pumps, Motors and Integral Transmissions, ISO/TC 131/SC 3 Cylinders, ISO/TC 131/SC 3/WG 2 Pneumatic Cylinders Mounting Dimensions ISO/TC 131/SC 5 Control products and components ISO/TC 131/SC 8 Product Testing ISO/TC 131/SC 8/ WG 11 Pressure rating ISO/TC 131/SC 9 Installation and systems ISO/TC 131/SC 8/WG 1 Hydraulic component and system sound measurement ISO/TC 131/SC 9/WG 1 Hydraulic system ISO/TC 131/SC 9/WG 2 Pneumatic Systems and their Installations
53
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
STANDARDS PUBLISHED 1. IS/ISO 3939:1977
Fluid power systems and components Multiple lip packing sets Methods for measuring stack heights Hydraulic fluid power Test code for the determination of airborne noise levels Part 1: Pumps-Methods using a parallel-piped microphone array Hydraulic fluid power Test code for the determination of airborne noise levels Part 2: Motors Hydraulic fluid power Test code for determination of air borne noise levels Part 3: Pumps _ Method using a parallel-piped microphone array Recommendation on nominal rates of flow for oil hydraulic system elements Recommendation on nominal bores for oil hydraulic system elements Hydraulic fluid power Cylinder Piston seal housings incorporating bearing rings Dimensions and tolerances Hydraulic fluid power Housings for elastomer-energized, plastic faced seals Dimensions and tolerances Part 1: Piston and housings Hydraulic fluid power Housings for elastomer-energized, plastic faced seals Dimensions and tolerances Part 2: Road seal housings
Dec 2011
2.
IS/ISO 4412-1:1991
Aug 2010
3.
IS/ISO 4412-2:1991
Aug 2010
4.
IS/ISO 4412-3:1991
Aug 2010
5.
IS 5108:1969
Aug 2007
6.
IS 5109:1969
Aug 2007
7.
IS/ISO 6547:1981
June 2010
8.
IS/ISO 7425(Pt 1):1988
June 2010
9.
IS/ISO 7425(Pt 2):1989
June 2010
54
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
10.
* *
IS 7513:1974 |ISO 1219:1976 IS 7513 (Pt 2):2002 /ISO 1219-2:1995
Graphical symbols for fluid power systems Fluid power systems and components Graphic symbols and circuit Diagrams Part 2: Circuit Diagrams. Fluid power systems and components Cylinder bores and piston rod diameters Metric series (first revision) Hydraulic fluid power Filter elements Verification of fabrication integrity and determination of the first bubble point (first revision) Method of test for collapse/burst resistance of oil hydraulic filter elements Hydraulic fluid power Filter Elements Verification of material compatibility with fluids (first revision) Method of test for end load rating of oil hydraulic filter elements Sizes for bores and port threads for pneumatic fluid power cylinders Recommendations (first revision) Flow fatigue characteristics of oil hydraulic filter elements Method of test (first revision) Evaluation of pressure drop versus flow characteristics of oil hydraulic filter elements and filters - Method of test (first revision)
Aug 2007
11.
July 2007
12.
IS 8208:2004 /ISO 3320:1987
Mar 2010
13.
* *
IS 8383:2000 |ISO 2942:1994
Aug 2011
14.
IS 8384:1977 |ISO 2941:1974
Dec 2011
15.
IS 8385:2005 /ISO 2943:1998
Mar 2010
16.
IS 8386:1977 |ISO 3723:1976 IS 8526:1994 |ISO 7180:1986
Dec 2011
17.
July 2009
18.
IS 8532:2000 |ISO 3724:1976
Aug 2011
19.
IS 9269:1990 |ISO 3968:1981
Aug 2010
SL. NO. 20. * *
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
IS 10069:1992 /ISO 4409:1986
Hydraulic fluid power Positive displacement pumps, motors and integral transmission Determination of steady state performance (first revision) Hydraulic fluid power Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors (second revision) Pneumatic fluid power Single rod cylinder, 1000kpa (10 bar) series with detachable mountings, bores from 32mm to 320mm Mounting dimensions (first revision) Hydraulic fluid power Four Port Directional control valves Mounting surfaces (first revision) Recommendations on nominal strokes for fluid power cylinder Fluid power systems and components Vocabulary (first revision) Hydraulic fluid power General rules relating to systems (first revision) Method of test for cylinders for oil hydraulic systems (first revision) Fluid power Cylinders Housing for piston and rod seals in reciprocating applications Dimensions and tolerances Recommendations (first revision)
Dec 2011
21.
IS 10129:2004 /ISO 3019-2:2001
Mar 2010
22.
* *
IS 10143:1995 /ISO 6431:1992
Aug 2010
23.
IS 10187:2002 /ISO 4401:1994
Oct 2007
24.
IS 10411:1983 |ISO 4393:1978 * * IS 10416:1992 /ISO 5598:1985 IS 10481:2002 /ISO 4413:1998 * * IS 10585:2002
Oct 2008
25.
Jan 2007
26.
Oct 2007
27.
Dec 2011
28.
IS 10983:1994 |ISO 5597:1987
May 2009
Hydraulic fluid power Mounting Mar 2010 dimensions for single rod cylinders , 16 MPa (160 bar) series Part 1: Medium series (first revision) *INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS 56
29.
* *
IS 11003(Pt 1):2005 /ISO 6020-1:1998
SL. NO. 30. * *
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
IS 11003(Pt 2):2000 /ISO 6020-2:1991
Hydraulic fluid power - Mounting dimensions for single rod cylinders 16Mpa (160 bar) series Part 2: Compact series Hydraulic fluid power Cylinders Bore and rod area ratios (first revision) Recommendations for parameter definitions and letter symbols for hydraulic fluid power pumps, motors and integral transmissions Pneumatic cylinders - Purchase specification (first revision) Hydraulic fluid power Gas-loaded accumulators with separator - Ranges of pressures and volumes and characteristic quantities (first revision) Purchase specification for hydraulic cylinders (first revision) Hydraulic fluid power Cylinders Rod end spherical eyes Mounting dimensions (first revision) Hydraulic fluid power Cylinders Rod end plain eyes Mounting dimensions (first revision) Fluid logic circuits for fluid power systems Part 1: Symbols for binary logic and related functions (first revision) Fluid logic circuits for fluid power systems Part 2: Symbols for supply and exhausts as related to logic symbols
Dec 2011
31.
IS 11146:1999 /ISO 7181:1991 IS 11147:1984 /ISO 4391:1983
Jan 2009
32.
July 2009
33.
IS 11245:2004
Mar 2010
34.
IS 11277:2004 /ISO 5596:1999
Mar 2010
35.
IS 11337:2002
Aug 2007
36.
IS 11559:1995 /ISO 6982:1992
Aug 2010
37.
IS 11560:1995 /ISO 6981:1992
Aug 2010
38.
IS 11845(Pt 1):1994 /ISO 5784-1:1988
Mar 2009
39.
IS 11845(Pt 2):1995 /ISO 5784-2:1989
Aug 2010
SL. NO. 40.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
IS 11845(Pt 3):1994 /ISO 5784-3:1989
Fluid logic circuits for fluid power systems Part 3: Symbols for logic sequences and related functions (first revision) Cup seal for fluid power applications Specification (first revision) Specification for Metal bonded seals Method of test for evaluation of performance of air pressure regulators Hydraulic fluid power Single rod cylinder 16MPa (160 bar) Compact series Tolerances (first revision) Recommendation on units for fluid power system Pneumatic fluid power Single rod cylinder 1000 kpa (10 bar) series Bores from 8 mm to 25 mm Mounting dimensions Guide for application and installation of pneumatic fluid power systems Pneumatic fluid power Single rod cylinders, 1000kpa (10 bar) series with integral mountings, bores from 32mm to 250mm Mounting dimensions (first revision) Hydraulic fluid power system Commissioning and maintenance of complete hydraulic systems Recommendations
May 2009
41.
IS 12484:1999
Nov 2009
42. 43.
IS 12485:1988 IS 12498:1988
Oct 2008 Nov 2008
44.
IS 12593:2000 /ISO 8131:1992
Aug 2010
45.
IS 12597:1988
Oct 2008
46.
IS 12723:1988 /ISO 6432:1985
Nov 2008
47.
IS 12725:2002 /ISO 4414:1998 IS 12738:1995 /ISO 6430:1992
Nov 2007
48.
Aug 2010
49.
IS 13053:1991
July 2007
Hydraulic fluid power Single rod July 2007 cylinders, 160 bar (16 MPa) Medium series Port dimensions *INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS 58
50.
IS 13085:1991 /ISO 8136:1986
SL. NO. 51.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
IS 13086:1999 /ISO 8139:1991
Pneumatic fluid power Cylinders 1000kpa (10 bar) series Rod end spherical eyes Mounting dimensions (first revision) Pneumatic fluid power Cylinders 1000kpa (10 bar) series Rod end clevis Mounting dimensions (first revision) Hydraulic fluid power Single rod cylinders, 250 bar (25 MPa) series Port dimensions Hydraulic fluid power Single rod cylinders, 16 MPa (160 bar) compact series Port dimensions (first revision) Hydraulic fluid power Single rod cylinders, 160 bar (16 MPa) medium and 250 bar (25 MPa) series Mounting dimensions for accessories Hydraulic fluid power Single rod cylinders, 16 MPa ( 160 bar) medium and 25 MPa (250 bar) series Tolerances (first revision) Fluid power cylinders Piston rod thread dimensions and types Hydraulic fluid power Valves Determination of pressure differential/flow characteristics Hydraulic fluid power filters Multipass method for evaluating filtration performance of a filter element (first revision)
Nov 2009
52.
IS 13087:1999 /ISO 8140:1991
Nov 2009
53.
IS 13102:1991 /ISO 8137:1986
Dec 2011
54.
IS 13103:2005 /ISO 8138:1998
Mar 2010
55.
IS 13251:1992 /ISO 8132:1986
Feb 2012
56.
* *
IS 13434:2005 /ISO 8135:1999
Mar 2010
57.
* * *
IS 13533:1992 /ISO 4395:1978 IS 13534:1992 /ISO 4411:1986
Dec 2011
58.
Dec 2011
59.
* *
IS 13535: 2005 /ISO 16889:1999
Mar 2010
SL. NO. 60. *
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
IS 13542:1992
Hydraulic fluid power Contamination analysis Method of reporting analysis data Hydraulic fluid power Fluid sample containers Qualifying and controlling cleaning methods (first revision) Hydraulic fluid power Particulate contamination analysis Extraction of fluid samples from lines of an operating system (first revision) Hydraulic fluid power Calibration of automatic count instruments for particles suspended in liquids Method using classified AC fine dust contaminant Evaluation of pressure drop versus flow characteristics of pneumatic filters Method of test Guide for marking system for fluid power components Part 1: Cylinders Guide for marking system for fluid power components Part 1: Valves Guide for marking system for fluid power components Part 3: Pumps and motors Hydraulic fluid power filter Pressure reducing valves, sequences valves, unloading valves and check valvesMounting surfaces (first revision) Hydraulic fluid power Pressure relief valves Mounting surfaces (first revision)
Dec2007
61.
IS 13569:1993 /ISO 3722:1976
Dec 2011
62.
IS 13570:2000 /ISO 4021:1992
Dec 2011
63.
* *
IS 13571:1992 /ISO 4402:1991
Feb 2012
64.
IS 13617:1992
Dec 2007
65.
IS 13876(Pt 1):1993
Oct 2008
66.
IS 13876(Pt 2):1993
Oct 2008
67.
IS 13876(Pt 3):1993
Oct 2008
68.
IS 14148:2005 /ISO 5781:2000
Aug 2010
69.
IS 14150:2005 /ISO 6264:1998
Mar 2010
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
70.
IS 14167:1994
Pneumatic cylinders Acceptance test
Jun 2010
71.
IS 14235:1995
Wiper seals used for fluid power application Specification
Feb 2010
72.
IS 14236:1995
Seals for reciprocating applications used Mar 2010 in fluid power systems Methods of test U-type seals with asymmetrical and symetrical lips used for fluid power application Specification Method of presenting performance data for hydraulic pumps Installation methods of positive displacement hydraulic pumps & motors Guidelines Apr 2010
73.
IS 14237:1995
74.
IS 14601:1998
Dec. 2008
75.
IS 14602:1999
Jan. 2009
76.
IS 14604:1998
Proforma for purchase specification for Dec. 2008 positive displacement pumps and motors used in oil hydraulic systems Pneumatic fluid power Components using compressible fluids Determination of flow-rate characteristics Hydraulic fluid power Pumps and motors Geometric displacements Hydraulic fluid power Determination of characteristics of motors - Part 1: At constant low speed and at constant pressure Nov 2009
77.
IS 14740:1999 /ISO 6358:1989
78.
IS 14848:2000 /ISO 3662:1976 * * IS 14849(Pt 1):2000 /ISO 4392-1:1989
Aug 2010
79.
Aug 2010
61
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
80.
* *
IS 14849(Pt 2):2000 /ISO 4392-2:1989
Hydraulic fluid power Determination of characteristics of motors - Part 2: Startability Hydraulic fluid power determination of characteristics of motors Part 3: At constant flow and at constant torque Compressed air filters-Evaluation parameters
Aug 2010
81.
IS 14849(Pt 3):2005 /ISO 4392-3:1993
Aug 2010
82.
IS 14875:2000 | ISO 5782-1: 1997 | ISO 5782-1: 1997 IS 14876:2000 |ISO 6301-1:1997 |ISO 6301-2:1997
Aug 2011
83.
Compressed air lubricators - Evaluation parameters
Dec 2011
84.
IS 15045(Pt 1):2001 Pneumatic fluid power Five port /ISO 5599-1:1990 directional control valves Part 1: Mounting interface surfaces without electrical connector IS 15045(Pt 2):2001 Pneumatic fluid power Five port /ISO 5599-2:1990 directional control valves Part 2: Mounting interface surfaces with optional electrical connector IS 15045(Pt 3):2001 /ISO 5599-3:1990 Pneumatic fluid power Five port directional control valves Part 3: Code system for communication of valve functions Fluid power systems and components Cylinders Identification code for mounting dimensions and mounting types
Dec 2011
85.
Dec 2011
86.
Dec 2011
87.
* *
IS 15168:2002 /ISO 6099:1985
June 2007
88.
* *
IS 15170:2002 Hydraulic fluid power Methods for /ISO/TR 10949:1996 cleaning and for assessing the cleanliness level of components
July 2007
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
89.
IS 15178:2002 /ISO 7745:1989 IS 15179:2002 /ISO 6072:1986 IS 15181(Pt 1):2002 /ISO 9110-1:1990
Hydraulic fluid power Fire resistant (FR) fluids Guidelines for use
June 2007
90.
June 2007 Hydraulic fluid power Compatibility between elastomeric materials and fluids Hydraulic fluid power Measurement techniques Part 1: General measurement principles Hydraulic fluid power Measurement techniques Part 2: Measurement of average steady-state pressure in a closed conduit Pneumatic fluid power Identification of ports and control mechanisms of control valves and other components Pneumatic cylinders for mechanized multiple spot welding Hydraulic fluid power Sealing devices Standard test methods to assess the performance of seals used in oil hydraulic reciprocating applications July 2007
91.
92.
IS 15181(Pt 2):2002 /ISO 9110-2:1990
July 2007
93.
IS 15331:2003 /ISO 11727:1999
April 2008
94.
IS 15332:2003 /ISO 7285:1995 IS 15432:2003 /ISO 7986:1997
April 2008
95.
Dec 2008
DRAFT STANDARDS UNDER PRINTING Doc: PGD 16 (1179) Hydraulic fluid power Fluids Method for coding the level of contamination by solid particles (First revision of IS 13542) Hydraulic fluid power Filter elements Determination of resistance to flow fatigue using particulate contaminant (Second Revision of IS 8532) Hydraulic fluid power Valves Determination of pressure differential/flow characteristics (First Revision of IS 13534) Hydraulic fluid power Filter elements Verification of collapse/burst pressure rating (Second Revision of IS 8384)
Doc: PGD 16 (1180)
Doc: PGD 16 (1181)
Doc PGD 16 (1182)
63
DRAFT STANDARDS FINALIZED FOR PRINTING Doc PGD 16 (1183) Hydraulic fluid power Four-port directional control valves Mounting surfaces (second revision IS 10187)
DRAFT STANDARDS COMPLETED WIDE CIRCULATION
Doc PGD 16 (1184)
Hydraulic fluid power Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series Mounting dimensions for accessories (First Revision of IS 13251)
64
PGD 17
FLUID POWER FITTINGS, HOSES AND HOSE ASSEMBLIES SECTIONAL COMMITTEE
SCOPE: a) Standardization in the field of ports, fittings, tubes and tube, hoses & hose assemblies and their testing. b) Liaison with: i) ISO/TC 131/SC 4 Connectors and similar products and components CORRESPONDING ISO COMMITTEE(S): ISO/TC 131/SC4 Connectors and Similar Products and Components ISO/TC 131/SC4/WG 1 Port and fitting end ISO/TC 131/SC4/WG 2 Flange port connectors ISO/TC 131/SC4/WG 3 Test requirements for fluid power hose assemblies ISO/TC 131/SC4/WG 4 Hydraulic quick-action couplings ISO/TC 131/SC4/WG 6 Methods for connecting hose couplings and tubes to connectors and ISO/TC 131/SC4/WG 9 Pneumatic connectors SL. NO. IS NO./DOC NO. TITLE REAFFIRM NO. OF AMEND MENTS
STANDARDS PUBLISHED 1. * * * * * * IS 8801:1978 Specification for Male stud coupling body for oil hydraulic couplings Specification for Ferrules for oil hydraulic couplings (first revision) Specification for Coupling nuts for oil hydraulic system (first revision) General requirements for ferrule type couplings used in oil hydraulic systems (first revision) Specification for Taper male stud elbow body for oil hydraulic couplings Part 1: Made from forging Dec 2006 3
2.
IS 8802:1987
Dec 2006
3.
IS 8803:1987
Mar 2007
4.
IS 8805:2002
Sep 2007
5.
IS 9387(Pt 1):1979
Dec 2007
6.
Specification for Taper male stud elbow Dec 2007 body for oil hydraulic couplings Part 2: Made from bar stock 7. IS 9388(Pt 1):1979 Specification for Equal elbow-body for oil Dec 2007 hydraulic couplings Part 1: Made from forgings *INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS 65
IS 9387(Pt 2):1979
SL. NO. 8.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
IS 9388(Pt 2):1979
Specification for Equal elbow-body for oil hydraulic couplings Part 2: Tee body made from bar stock Specification for Equal tee body for oil hydraulic couplings Part 1: Made from forgings Specification for Equal tee body for oil hydraulic couplings Part 2: Made from bar stock Specification for Straight coupling body for oil hydraulic couplings Specification for Straight coupling assemblies for oil hydraulic systems Specification for Taper male stud coupling body for oil hydraulic couplings Specification for Elbow couplings assemblies for oil hydraulic systems Specification for Male stud elbow body for oil-hydraulic couplings Part 1: Made from forgings Specification for Male stud elbow body for oil-hydraulic couplings Part 2: Made from bar stock Hexagon socket pipe plugs (first revision)
Dec 2007
9.
IS 9389(Pt 1):1979
Dec 2007
10.
IS 9389(Pt 2):1979
Dec 2007
11.
IS 9390:1980
Dec 2007
12.
IS 9391:1980
Dec 2007
13.
* *
IS 9392:1980
Dec 2007
14.
IS 9411:1980
Dec 2007
15.
IS 9412(Pt 1):1980
Dec 2007
16.
IS 9412(Pt 2):1980
Dec 2007
17. 18.
IS 9645:2005 IS 9724(Pt 1):1981
Mar 2010
1 1
Specification for Taper male stud tee body Dec 2007 (Stud branch) for oil-hydraulic couplings Part 1: Made from forgings Specification for Taper male stud tee body Dec 2007 (Stud branch) for oil-hydraulic couplings Part 2: Made from bar stock
19.
IS 9724(Pt 2):1981
SL. NO. 20.
IS NO./DOC NO.
TITLE
REAFFIRM
IS 9725(Pt 1):1981
Specification for Male stud tee body (Stud branch) for oil hydraulic couplings Part 1: Made from forgings Specification for Male stud tee body (Stud branch) for oil hydraulic couplings Part 2: Made from bar stock Specification for Equal cross body for oilhydraulic couplings Part 1: Made from forgings Specification for Equal cross body for oilhydraulic couplings Part 2: Made from bar stock Specification for Bulk head elbow body for oil-hydraulic couplings Part 1: Made from forgings Specification for Bulk head elbow body for oil-hydraulic couplings Part 2: Made from bar stock Specification for Tee coupling assemblies for oil-hydraulic systems Specification for Bulk head straight body for oil-hydraulic couplings (first revision) Specification for Bulk head straight coupling assembly for oil hydraulic systems Specification for Bulk head elbow coupling assembly for oil hydraulic systems Method of test for ferrule type couplings used in oil-hydraulic systems
Dec 2007
21.
IS 9725(Pt 2):1981
Dec 2007
22.
IS 9746(Pt 1):1983
Dec 2007
23.
IS 9746(Pt 2):1981
Dec 2007
24.
IS 9757(Pt 1):1981
Dec 2007
25.
IS 9757(Pt 2):1983
Dec 2007
26.
IS 9767:1981
Dec 2007
27.
IS 9768:1995
Dec 2006
28.
IS 9769:1981
Dec 2007
29.
IS 9770:1981
Dec 2007
30.
IS 10103:1982
Dec 2007
67
SL. NO. 31. * *
IS NO./DOC NO.
TITLE
REAFFIRM
IS 10410:1983
Specification for Lock nut for bulk head coupling assembly for oil hydraulic systems Specification for Equal cross coupling assembly for oil hydraulic system Specification for Male stud tee body (Stud run) for oil hydraulic couplings Part 1: Made from forgings
Nov 2008
32.
* *
IS 10417:1983
Nov 2008
33.
IS 10433(Pt 1) :1983
Nov 2008
34.
* *
IS 10433(Pt 2): 2002
Male stud tee body (Stud run) for oil Dec 2007 hydraulic couplings Specification Part 2: Made from bar stock (first revision) Specification for Taper male stud tee body Nov 2008 (Stud run) for oil hydraulic couplings Part 1: Made from forging Specification for Taper male stud tee body Nov 2008 (Stud run) for oil hydraulic couplings Part 2: Made from bar stock Specification for Stud run tee coupling assemblies for oil hydraulic systems Specification for Welding coupling body for oil hydraulic couplings Specification for Welding coupling assembly for oil hydraulic systems Nov 2008 1
35.
IS 10453(Pt 1): 1983
36.
IS 10453(Pt 2): 1983
37.
IS 10480:1983
38.
IS 10956:1984
Aug 2010
39.
IS 10978:1984
Aug 2010
40.
* * * *
IS 12092:1987
Method of test for hose assemblies used in Mar 2007 hydraulic fluid power systems Hexagonal socket screw plugs with parallel screw threads for fluid power systems Mar 2007 1
41.
IS 12096:1987
Hexagonal head taper plugs for oil Mar 2007 hydraulic systems Part 1: Made from forgings *INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS 68
42.
* *
IS 12116(Pt 1): 1987
SL. NO. 43. * *
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
IS 13170(Pt 1): 1999 /ISO 6149-1:1993
44
* *
IS 13170(Pt 2):1999 /ISO 6149-2:1993
Connections for fluid power and general use Ports and stud ends with ISO 261 threads and O-ring sealing Part 1: Ports with O-ring seal in truncated housing (first revision) Connections for fluid power and general use Ports and stud ends with ISO 261 threads and O-ring sealing Part 2 : Heavy duty (S series) stud ends Dimensions, test methods and requirements Connections for fluid power and general use Ports and stud ends with ISO 261 threads and O-ring sealing Part 3 : Light duty (L series) stud ends Dimensions, design, test methods and requirements Reducer coupling assemblies for oil hydraulic systems Specification Straight reducer coupling body for oil hydraulic systems Specification Hexagonal head screw plugs with shoulder and parallel screw threads Specification Hydraulic fluid power Quick action coupling Part 1: Dimensions and requirements Hydraulic fluid power Quick action coupling Part 2: Test methods Fluid power systems and components Connectors and associated components Nominal pressures
Feb 2010
Feb 2010
45.
* *
IS 13170(Pt 3):1999 /ISO 6149-3:1993
Feb 2010
46.
IS 13336:1992
Jun 2007
47.
IS 13337:1992
Jun 2007
48.
* *
IS 13338:1992
June 2007
49.
IS 13614(Pt 1):1995 /ISO 7241-1:1987
Dec 2006
50.
* * * *
IS 13614(Pt 2):1993 /ISO 7241-2:1986 IS 14423:1997
May 2008
51.
Jan 2007
52.
Tube end straight reducers for oil Mar 2008 hydraulic couplings *INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS 69
IS 14528:1998
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO.OF AMEND MENTS
53
IS 15097:2002 /ISO 6150:1988
Pneumatic fluid power Cylindrical quick Dec 2007 action couplings for maximum working pressures of 10 bar, 16 bar and 25 bar (1Mpa, 1.6Mpa and 2.5Mpa) Plug connecting dimensions, specifications, applications, guidelines and testing Metallic tube connections for fluid power and general use 24 cone connectors with O-ring weld-on nipples Metallic tube connections for fluid power and general use Test methods for threaded hydraulic fluid power connections Connections for general use and fluid power Ports and stud ends with ISO 261 threads with elastomeric or metal to metal sealing Part 1 Threaded ports Connections for general use and fluid power Ports and stud ends with ISO 261 threads with elastomeric or metal to metal sealing Part 2 Stud ends with elastomeric sealing (Type E) Connections for general use and fluid power Ports and stud ends with ISO 261 threads with elastomeric or metal to metal sealing Part 3 Stud ends with metal to metal sealing (Type B) Dec 2007
54
* *
IS 15276:2002 /ISO 8434-4:1995
55
* *
IS 15277:2002 /ISO 8434-5:1995
Dec 2007
56.
IS 15577(Part 1): 2005 /ISO 9974-1:1996
Mar 2010
57.
IS 15577(Part 2): 2005 /ISO 9974-2:1996
Mar 2010
58.
IS 15577(Part 3): 2005 /ISO 9974-3:1996
Mar 2010
DRAFT STANDARDS COMPLETED WIDE CIRCULATION Doc: PGD17(1031) Doc: PGD17(1032) Amendment 2 to IS 13336: 1992 Amendment 2 to IS 13337: 1992
PGD 18 INDUSTRIAL AND PRODUCTION AUTOMATION SYSTEMS AND ROBOTICS SECTIONAL COMMITTEE SCOPE: a) Standardization in the field of industrial automation systems and intrigation concerning discret part manufacturing and encompassing the application of multiple technologies i.e. information systems, machines, equipments communication (Bus communication, telecommunication etc. excluded): - Process automation - Electrical electronics equipments - Programmable logical controllers for general application - Sensors Liasion with: i) LTD 31 Data communication ii) LTD 33 Information systems and software iii) LTD 34 Programming languages iv) LTD 35 Computer application systems v) LTD 36 Computer systems and interconnections vi) LTD 37 Computer media b) Coordination of work with: i) ISO/TC 184 Industrial automation systems CORRESPONDING ISO COMMITTEE(S): ISO/TC 184 Industrial Automation Systems SL. NO. IS NO./DOC NO. TITLE REAFFIRM NO. OF AMEND MENTS
STANDARDS PUBLISHED 1. IS 13547(Part 1): 2010/ ISO 94091:2004 2. IS 13547(Part 2): 2010/ ISO 9409-2: 2002 IS 14530:1998 /ISO 10210:1992 IS 14531:2005 /ISO 9946:1999
Manipulating industrial robots Mechanical interfaces Part 1: Plates (Second Revision) Manipulating industrial robots Mechanical interfaces Part 2: Shafts (First Revision) Manipulating industrial robots Safety May 2008 1
3.
4.
Manipulating industrial robots Presentation of characteristics (first revision)
Feb 2010
SL. NO.
IS NO./DOC NO.
ITLE
REAFFIRM
NO. OF AMEND MENTS
5.
IS 14533:2005 /ISO 9283:1998
Manipulating industrial robots Performance criteria related test methods(first revision)
Mar 2011
6.
IS 14662:1999 /ISO 8373:1994 * * IS 14663:1999 /ISO 9787:1990 IS 14776(Pt 1):2000 /ISO/TR 10314(Pt 1):1990
Industrial robots Vocabulary
Mar 2011
7.
Manipulating industrial robots Coordinate systems and motions Industrial automation Shop floor production Part 1: Reference model for standardization and a methodology for identification of requirements Industrial automation Shop floor production Part 2: Application of the reference model for standardization and methodology
Mar 2011
8.
Mar 2011
9.
IS 14776(Pt 2):2000 /ISO/TR 10314(Pt 2):1990
Mar 2011
10.
IS 15031:2001 Manipulating industrial robots /ISO/TR 11032:1994 Application oriented test Spot welding IS 15032(Pt 1):2001 /ISO 6210-1:1991 Cylinder for robot resistance welding gums - Part 1: General requirement
July 2011
11.
July 2011
12.
IS 15033:2001 Manipulating industrial robots EMC /ISO/TR 11062:1994 test ethods and performance evaluation criteria Guidelines
Aug 2011
13.
IS 15034:2001 Manipulating industrial robots Aug 2011 /ISO/TR 13309:1995 Informative guide on test equipment and metrology methods of operation for robot performance evaluation in accordance with IS 14533:1998 IS 15035:2001 Manipulating industrial robots /ISO/TR 10562:1995 Intermediate code for robot (ICR) Oct 2011
14.
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
15.
IS 15291:2003 /ISO 11593:1996
Manipulating industrial robots Automatic end effect or exchange systems Vocabulary and presentation of characteristics
Mar 2008
16.
Industrial automation systems and IS 15294:2003 /ISO/TR 10450:1991 integration operating conditions for discrete part manufacturing Equipment in industrial environments IS 15295:2003 /ISO 10656:1996 Electric resistance welding Integrated transformers for welding guns
Feb 2008
17.
Feb 2008
18.
* *
IS 15296:2003 / ISO 11161:1994
Industrial automation systems Safety of integrated manufacturing systems Basic requirements
Feb 2008
19.
Industrial automation glossary IS 15571:2005 /ISO/TR 11065:1992
Feb 2010
PGD 19
LUBRICATING EQUIPMENT SECTIONAL COMMITTEE
SCOPE: Formulation of standards on lubricating equipment such as nipples, grease dispensers, oil cans, oil cups for drip feed and grease cups. CORRESPONDING ISO COMMITTEE(S): NIL SL. NO. IS NO./DOC NO. TITLE REAFFIRM NO. OF AMEND MENTS
STANDARDS PUBLISHED 1. ** IS 4009(PT 1): 1981 Specification for Grease nipples Part 1 Button head grease nipples (first revision) July 2008
2. **
IS 4009(PT 2): 1981
Specification for Grease nipples Part 2 July 2008 Conical head grease nipples (first revision) Lubricating equipment - Grease nipples Part 3 Cup type Specification Specification for Oil cans Part 1 Light duty oil cans Specification for Oil cans Part 2 Conical oil cans Specification for Oil cans Part 3 Feeding oil cans Specification for Oil cans Part 4 Detachable spout oil cans Specification for Oil cans Part 5 Lever type oil cans Specification for Grease cups (first revision) Specification for Wick feed lubricators Mar 2009
3. **
IS 4009(PT 3): 1995
4. **
IS 4561(PT 1): 1968
Dec 2006
5. **
IS 4561(PT 2): 1968
July 2008
6. **
IS 4561(PT 3): 1968
July 2008
7. **
IS 4561(PT 4): 1968
July 2008
8. **
IS 4561(PT 5): 1968
Dec 2006
9.
IS 4672:1982
Dec 2006
10.
IS 4673:1968
Dec 2006
74
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
11.
IS 5548:1970
Specification for Lubricating nipple adaptors Specification for oilers (first revision) Specification for lubricating connectors (first revision) Specification for Limited supply plugs Dimensions for drip-feed lubricators Dimensions for lubrication holes, grooves and bore reliefs Specification for Manual portable grease guns (first revision) Glossary of lubrication terms
Dec 2006
12. 13. **
IS 5559:1984 IS 5664:1984
Dec 2006 Dec 2006
14. 15. 16.
IS 7089:1973 IS 7744:1975 IS 7745:1975
July 2008 Dec 2006 July 2008
17. **
IS 7794:1984
Dec 2006
18. 19.
IS 8417:1977 IS 8593(PT 1): 1977
Dec 2006 1
Recommendations for centralized Dec 2006 lubrication as applied in plant and machinery Part 1 Oil lubrication Recommendations for centralized July 2008 lubrication as applied in plant and machinery Part 2 Grease lubrication Recommendations for centralized Dec 2006 lubrication as applied in plant and machinery Part 3 Aerosol lubrication Specification for Air operated high pressure grease pumps Specification for Volume grease pumps Specification for Regulating type liquid flow indicators July 2008
20.
IS 8593(PT 2): 1988
21.
IS 8593(PT 3): 1984
22. **
IS 9772:1981
23. ** 24.
IS 9773:1981 IS 11617:1986
Dec 2006 July 2008 1
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
25.
IS 11618:1986
Specification for Non-regulating type liquid flow indicators Code for lubrication symbols
Dec 2006
26. 27.
IS 12139:1987 IS 14279:1995
July 2008
Lubricating equipment Barrel transfer Mar 2009 pumps for grease Specification Lubricating equipment Barrel transfer Mar 2009 pumps for oil Specification
28.
IS 14298:1995
PGD 20 SCOPE: a) i) ii)
ENGINEERING STANDARDS SECTIONAL COMMITTEE
Formulation of standards on Basic mechanical engineering subjects for general applicability such as knurls, relief grooves, countersunks and counterbores, and Screw threads including basic profiles, pitch-diameter combination, terminology, technical requirement and tolerances but excluding screw thread gauges.
b) Coordination of work with: i) ISO/TC 1 Screw Thread and CORRESPONDING ISO COMMITTEE(S): ISO/TC 1 Screw Thread;
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
STANDARDS PUBLISHED 1. IS 554:1999 /ISO 7-1:1994
Pipe threads where pressure tight joints are May 2009 made on the threads Dimensions, tolerances and designation (fourth revision) ISO System of limits and fits Part 1: Nov 2008 Basis of tolerances, deviations and fits (second revision) ISO System of limits and fits Part 2: Nov 2008 Tables of standard tolerances grades and limit deviations for holes and shafts (first revision) General tolerances Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (third revision) General tolerances Part 2: Geometrical tolerances for features without individual tolerance indications ISO metric external screw threads interference fit applications (first revision) Nov 2008
2.
**
IS 919(Pt 1):1993 /ISO 286 -1:1988
3.
**
IS 919(Pt 2):1993 /ISO 286 -2:1988
4.
IS 2102(Pt 1): 1993 /ISO 2768-1:1989
5.
IS 2102(Pt 2): 1993 /ISO 2768-2:1989
Nov 2008
6.
IS 2186:1985
May 2011
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
7. 8.
IS 2473:1975 IS 2540:2008
Dimensions for centre holes (first revision) Dimensions for threaded centre holes (first revision) Pipe threads where pressure-tight joints are not made on the threads Dimensions, tolerances and designation (third revision)
Feb 2007
9.
IS 2643:2005 /ISO 228-1:2000
Sep 2010
10.
IS 2769:1969
11. 12. **
IS 3403:1981 IS 3406(Pt 1):1986
Sizes for squares and square holes for Feb 2007 general engineering purposes (first revision) Dimensions for knurls (first revision) Feb 2007 Dimensions for counterbores (second revision) Dimensions for counterbores (second revision) countersinks and Feb 2007 Part 1: Countersinks
13.
**
IS 3406(Pt 2):1986
countersinks and Feb 2007 Part 2: Counterbores
14.
IS 3428:2009
Dimensions for relief grooves (second revision) Radii for rounding for general engineering purposes (second revision) Conical tapers and taper angles for general Nov 2006 engineering purposes (second revision) ISO general purpose metric screw threads Aug 2006 Part 1: Basic profiles (second revision) ISO general purpose metric screw threads Aug 2006 Part 2: General plan (second revision) ISO general purpose metric screw threads July 2009 Part 3: Basic dimensions (second revision)
15.
IS 3457:2009
16.
IS 3458:2001 /ISO 1119:1998 IS 4218(Pt 1):2001 /ISO 68-1:1998 IS 4218(Pt 2):2001 /ISO 261:1998 IS 4218(Pt 3):1999 /ISO 724:1993
17.
18.
19.
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
20.
IS 4218(Pt 4):2001 /ISO 262:1998
ISO general purpose metric screw threads Sep 2006 Part 4: Selected revision)sizes for screws, bolts and nuts (second General purposes knuckle threads Part 1: Dec 2008 Thread profiles and nominal dimensions (second revision) General purposes knuckle threads Part 2: Dec 2008 Deviations and tolerances (second revision) metric buttress threads Part 1 :Thread Nov 2009 Dimensions for profile (second revision) Dimensions for metric buttress threads Part Oct 2009 2: Pitch diameter combination (second revision) Dimensions for metric buttress threads Part Nov 2009 3: Basic dimensions (second revision) Dimensions for metric buttress threads Part 4: Tolerancing system (second revision) Feb 2010
21.
IS 4695(Pt 1): 2003
22.
IS 4695(Pt 2): 2003
23.
IS 4696(Pt 1): 2004
24.
IS 4696(Pt 2): 2004
25.
IS 4696(Pt 3): 2004
26.
IS 4696(Pt 4): 2005
27.
IS 7008(Pt 1):1999 /ISO 2901:1993
ISO metric trapezoidal screw threads Part Nov 2009 1: Basic profile and maximum material profile (second revision) ISO metric trapezoidal screw threads Part Oct 2008 2: Pitch diameter combinations (first revision) ISO metric trapezoidal screw threads Part Oct 2008 3: Basic dimensions (first revision) ISO metric trapezoidal screw threads Part Nov 2009 4: Tolerances (second revision)
28.
IS 7008(Pt 2):1988 /ISO 2902:1977
29.
IS 7008(Pt 3):1988 /ISO 2904:1977 IS 7008(Pt 4):1999 /ISO 2903:1993
30.
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
31.
IS 7615 : 2003
System of cone tolerances for conical work Dec 2008 pieces from C = 1:3 to 1:500 and lengths from 6 to 630 mm (second revision) Limits of sizes for ISO metric trapezoidal May 2011 nut threads (diameter range 8 to 100mm) Limits of sizes for ISO metric trapezoidal May 2011 bolt threads (diameter range 8 to 100mm) Limits of sizes for ISO metric trapezoidal Oct 2006 nut threads (diameter range 105 to 300 mm) Limits of sizes for ISO metric trapezoidal Oct 2006 bolt threads (diameter range 105 to 300 mm) Dimensions for metric external taper and internal parallel screw threads (second revision) Sep 2007 1
32.
IS 7684:1975
33.
IS 7685:1975
34.
IS 7726:1975
35.
IS 7727:1975
36.
IS 8788:2002
37.
IS 8841:1978
Recommendations for limits and fits for Nov 2008 sizes above 3 150 mm to 10 000 mm Limits of sizes for ISO metric external Oct 2008 screw threads for high temperature applications Terminology for screw threads May 2011
38.
IS 9965:1981
39. 40. **
IS 10587:1983 IS 11698(Pt 1) :2004
ISO miniature screw threads Part 1: Basic Nov 2009 profiles(first revision) ISO miniature screw threads Part 2: Basic Nov 2009 dimensions for design profiles ISO miniature screw threads Part 3: Sep 2010 Tolerances (first revision)
41.
**
IS 11698(Pt 2):2004
42.
**
IS 11698(Pt 3):2005
ISO miniature screw threads Part 4: Sep 2010 Limits of sizes (first revision) *INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS 80
43.
**
IS 11698(Pt 4):2005
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
44.
IS 12186:1987
Tolerances for ISO metric trapezoidal Oct 2008 screw threads for lead and feed screw assemblies ISO general purpose metric screw threads Aug 2006 Tolerances Part 1: Principles and basic deta ISO general purpose metric screw threads Aug 2006 Tolerances Part 2 : Limits of sizes for internal and external screw threads Medium quality ISO general purpose metric screw threads July 2006 Tolerances Part 3: Deviation for constructional screw threads ISO general purpose metric screw threads Sep 2006 Tolerances Part 4: Limits of sizes for hotdip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing ISO general purpose metric screw threads Sep 2006 Tolerances Part 5: Limits of sizes for hotdip galvanized internal screw threads to mate with external screw threads with maximum size of tolerance position h before galvanizing Survey of screw threads (First Revision)
45.
IS 14962(Pt 1):2001 /ISO 965-1:1998
46.
IS 14962(Pt 2):2001 /ISO 965-2:1998
47.
IS 14962(Pt 3):2001 /ISO 965-3:1998
48.
IS 14962(Pt 4):2001 /ISO 965-4:1998
49.
IS 14962(Pt 5):2001 /ISO 965-5:1998
50.
SP 42:2008
81
PGD 21 METEOROLOGICAL INSTRUMENTS SECTIONAL COMMITTEE SCOPE: Preparation of standards for rain gauges; rain measures; anemometers; windvanes; Psychrometers; thermometer screen (Single and double); evaporimeters; barometers; thermographs; hygrograph barographs etc. CORRESPONDING ISO COMMITTEE : NIL SL. NO. IS NO./DOC NO. TITLE REAFFIRM NO. OF AMEND MENTS 1
STANDARDS PUBLISHED 1. IS 4849:1992 Meteorology Rain measures Specification (first revision) 2. IS 5225:1992
Dec 2008
Meteorology Rain gauge, non recording Mar 2008 Specification (first revision) Meteorology Rain gauge, recording Mar 2008 Specification (first revision) Specification for Aneroid barometers Specification for Mercury barometers Specification for Windvane Specification for Hair hygrograph Specification for Thermograph, bimetallic Oct 2011 Oct 2011 Oct 2011 Dec 2008 Dec 2008 1 1 1
3.
IS 5235:1992
4. 5. 6. 7. 8. 9.
IS 5793:1970 IS 5798:1970 IS 5799:1970 IS 5900:1970 IS 5901:1970 IS 5912:1997
1 1
Specification for Anemometer, cup counter Oct 2007 (first revision) Specification for Clock mechanism and Dec 2008 drums for meteorological instruments (first revision) Specification for Barograph, aneroid Dec 2008 1
10.
IS 5924:1988
11. 12.
IS 5945:1970 IS 5946:1992
Meteorology Whirling psychrometer Mar 2008 Specification (first revision)
Charts for recording meteorological Oct 2006 1 instruments *INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS 82
13.
IS 5947:1970
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
14. 15.
IS 5948:1970 IS 5973:1998
Specification for Thermometer screens
Oct 2011
Pan evaporimeter Specification (first Feb 2008 revision) Specification for Assmann psychrometer Specification for Snowgauge Wind equipment distant Specification (first revision) indicating Dec 2008 Dec 2008 Mar 2008 1 1 1
16. 17. 18.
IS 6805:1973 IS 6806:1973 IS 6871:1992
19. 20.
IS 7243:1974 IS 7244:1974
Specification for Sunshine recorder
Oct 2011
Specification for Thermometer for mercury Oct 2011 barometer Specification pyranometer for Thermoelectric Dec 2008 4
21.
IS 8336:1977
22. 23.
IS 8693:1978 IS 8754:1992
Specification for Net pyrradiometer
Oct 2011
2 1
Electrical anemograph -specifications (first Mar 2008 revision) Specification for Correction mercury barometers slide for Oct 2011
24.
IS 9085:1979
25. 26. 27. 28. 29.
IS 10473:1983 IS 11121:1984 IS 11875:1986 IS 11876:1986 IS 12781:1989
Specification for Cloud search light Specification for Pyranograph, bimetallic Specification for Diffuse pyranometers Specification for Airmeter
Oct 2011 Oct 2011 Dec 2008 Dec 2008 1 1
Marine buckets for sea surface temperature Dec 2008 measurement- specification Sensitive anemometer - Specification Mar 2008
30.
IS 13436:1992
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
31.
IS 13448:1992
MeteorologyThermoelectric pyrheliometer Mar 2008 Specification Angstrom pyrheliometer Specification Balloons Meteorological Velocity set purposes scale for Mar 2008 Sep 2007 meteorological Dec 2007
32. 33. 34.
IS 13459:1992 IS 15216:2002 IS 15243:2002
35. 36.
IS 15253:2002 SP 61:1994
Dew gauge Specification
Dec 2007 1
General guidelines for automatic weather Aug 2009 stations
PGD 22
EDUCATIONAL INSTRUMENTS AND EQUIPMENT SECTIONAL COMMITTEE
SCOPE: (a) Formulation of standards for instruments and equipment for school and college Laboratories. (b) Formulation of standards for surveying instruments, drawing instruments; optical instruments (excluding medico optical instruments) and their components and materials. (c) Coordination of work with: i) ISO/TC 172 Optics and photonics. CORRESPONDING ISO COMMITTEE : ISO/TC 172 SL. NO. IS NO./DOC NO. TITLE REAFFIRM NO. OF AMEND MENT
STANDARDS PUBLISHED 1. IS 988:1959 2. IS 1360:1989
General requirements for optical components Engineers' revision) pattern tee squares
Aug 2010
(second Dec 2010
3. 4. 5.
IS 1399:1959 IS 1400:1960 IS 1444:1989
Glossary of terms used in optical technology Specification for optical glass
Aug 2010 Aug 2010 1
Engineers' pattern drawing boards (second Dec 2010 revision Specification for metric scales for general Sep 2010 purposes (first revision) Specification for metric steel scales for Sep 2008 engineers (first revision) Specification for metric architectural purposes scales for Aug 2010 2
6.
IS 1480:1970
7.
IS 1481:1970
8.
IS 1491:1959
9. 10.
IS 1492:1970 IS 1561:1989
Metric surveying chains (first revision)
Sep 2008
2 1
Set squares for use of drawing offices (first Dec 2009 revision)
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEN MENT 1
11.
IS 1562:1962
Specification for metric diagonal scales Aug 2010 (cartographers, surveyors and engineers) Protractors for use of drawing offices (first Dec 2009 revision) Optical instruments - Bubbles - Specification Sep 2008 (first revision) Specification for trough compass Aug 2010
12.
IS 1563:1989
13.
IS 1632:1993
14. 15.
IS 1764:1961 IS 1779:1961
Specification for 4-metric, leveling staff, Aug 2010 folding type Specification (arrows) for surveying chain pins Aug 2010
16.
IS 1842:1961
17. 18
IS 1955:1961 IS 1957:1961
Specification for prismatic compasses, liquid
Aug 2010
Specification for prismatic compasses, non- Aug 2010 liquid Specification for straightedges for drawing Aug 2010 offices use Specification for pantograph Aug 2010 1
19.
IS 2233:1962
20. 21.
IS 2286:1963 IS 2287:1970
Specification for drafting machines (first Aug 2010 revision) Specification for ranging rods Specification for beam compasses Specification revision) Plane tables for geometry boxes Aug 2010 Aug 2010 (first Dec 2007
22. 23. 24.
IS 2288:1963 IS 2466:1963 IS 2533:1978
25.
IS 2539:1963
Aug 2010
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENT 2
26. 27. 28.
IS 2754:1964 IS 2976:1964 IS 2988:1995
General requirements for optical instruments Specification for optical theodolite Vernier theodlite revision) Specification
Aug 2010 Aug 2010
(first Nov 2010
29.
IS 3081:1994
Microscopes - General purposes - Dimensions Dec 2009 and marking (first revision) Microscopes Slips and slides Jan 2008 Specification: Part 1 Microscope slips; Part 2 Microscope slides (first revision) Specification for prismatic binoculars for Aug 2010 common use Specification for cathetometer Aug 2010 4
30.
IS 3099(Pt 1&2): 1992
31.
IS 3113:1965
32. 33.
IS 3135:1965 IS 3206:1989
Engineers drawing instruments, dividers - Dec 2009 Specification (first revision) Engineers drawing instruments, rotating Dec 2009 compasses - Specification (first revision) Engineers drawing instruments, half set of Dec 2009 compasses Specification (first revision) Engineers drawing instruments, spring bow Dec 2009 compasses - Specification (first revision) Engineers drawing instruments, drawing Dec 2009 pens - Specification (first revision) Engineers drawing instruments, pen points Aug 2010 Specification(first revision) Engineers drawings instruments, lengthening Aug 2010 bars Specification(first revision)
34.
IS 3207:1989
35.
IS 3208:1989
36.
IS 3209:1989
37.
IS 3210:1989
38.
IS 3211:1991
39.
IS 3212:1991
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENT
40.
IS 3213:1991
Engineers drawing instruments, handles Aug 2010 Specification(first revision) Engineers drawing instruments, pencil points Aug 2010 Specification(first revision) Engineers drawing instruments, needle points Aug 2010 Specification(first revision) Engineers drawing instruments, needles Dec 2009 Specification(first revision) Engineers drawing instruments, prickers Aug 2010 Specification(first revision) Specification for paralleled rulers, 150 mm Sep 2008 (link type) Specification for engineers drawing Aug 2010 instruments, boxes for reads and needles Specification for engineers instruments, screw drivers Set for drawing instruments drawing Aug 2010
41.
IS 3214:1991
42.
IS 3215:1991
43.
IS 3216:1989
44.
IS 3217:1991
45.
IS 3218:1968
46.
IS 3219:1966
47.
IS 3220:1966
48. 49.
IS 3221:1966 IS 3222(PT 1):1989
Aug 2010
Instruments screws Specification Part 1 Dec 2009 Fasteners for drawing instruments (first revision) Specification for student type microscope Specification microscope Specification microscope for monocular Aug 2010 2 2
50. 51.
IS 3686:1966 IS 4328:1967
dissecting Aug 2010
52.
IS 4329:1967
for
measuring
(travelling) Aug 2010
53.
IS 4380:1967
Specification for abneyd level
Aug 2010
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENT 1
54.
IS 4590:1980
Specification for secondary level (first revision) Specification for sounding sextant
Aug 2010
55. 56.
IS 5146:1969 IS 5148:1969
Aug 2010
Specification for hand magnifiers (circular) Aug 2010 50 mm, 75 mm and 100 mm Specification for proportional compasses Dec 2009 150 mm, 200 mm and 300 mm Specification for research microscope Specification for drawing pins Aug 2010 Sep 2008 1 3
57.
IS 5153:1969
58. 59. 60.
**IS 5204:1969 IS 5205:1969 IS 5213:1969
Specification for french curves for drawing Sep 2008 office use Code of practice for packing and packaging of Dec 2009 optical and mathematical instrument and components Specification for engineers instruments, dotting pens drawing Sep 2008
61.
IS 5415:1969
62.
IS 5694:1970
63.
IS 5706:1993
Optical instruments Spirit levels for use in Aug 2010 precision engineering Specification (first revision) Specification for engineers instruments, bordering pens Specification for engineers instruments, curve pens drawing Sep 2008
64.
IS 5726:1970
65.
IS 5737:1970
drawing Sep 2008
66.
IS 5920:1970
Recommendations for the preparation of Sep 2008 drawings for optical elements and systems Specification for tangent clinometer Aug 2010
67.
IS 5928:1970
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENT 2 1
68. 69. 70.
IS 6425:1971 IS 6471:1971 IS 7009:1973
Specification for dioptometer (lensometer) Specification for spectrometer (student type) Specification surveying) for optical square
Sep 2008 Sep 2008
(for Sep 2008
71. 72.
IS 7010:1973 IS 7011:1973
Specification for pivots for compasses
Aug 2010
1 1
Specification for back-silvered mirrors used Aug 2010 in instrument industry Crystals and dielectric materials used in Aug 2010 instrument industry Timbers used in instrument industry Plastics used in instrument industry Aug 2010 Aug 2010
73.
IS 7020:1973
74. 75. 76.
IS 7047:1973 IS 7078:1973 IS 7265:1973
Coating materials (metals, alloys dielectries) Aug 2010 used in optical instrument industry Specification for Planimeters Specification for parallel ruler (roller type) Sep 2008 Sep 2008
77. 78. 79.
IS 7543:1975 IS 7544:1975 IS 7545:1975
Specification for optical bench (advanced Dec 2009 type) Specification for refractometer-abbe type Dec 2009
80. 81.
IS 7919:1975 IS 8248:1976
Specification for anti reflection coating on Aug 2010 glass optical components Specification for binocular eyepieces for Dec 2009 microscope Specification for instrument jewels Dec 2009 1
82.
IS 8275:1976
83. 84.
IS 8311:1976 IS 8330:2004
Tripod for surveying instruments Fixed leg June 2009 type Specification (second revision) *INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS 90
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENT
85. 86.
IS 8390:1977 IS 8622:1999
Specification for arc combs
Dec 2009
Wire wound sliding contact rheostats for use Dec 2009 in educational institutions Specification (first revision) Specification for engineers' instrument, double line pens Specification for flame photometer Specification for saccharimeter (optical) polarimeter drawing Aug 2010 1
87.
IS 8630:1977
88. 89.
IS 8651:1977 IS 8661:1977
Dec 2009 and Dec 2009
90. 91.
IS 8679:1978 IS 8680:1978
Specification for triangular scales
Aug 2010
Specification for engineers' drawing Aug 2010 instruments, compass bowl pen double knee jointed with sector head joints Specification for mirror stereoscope (first Aug 2010 revision) Specification for spherometer Specification for autocollimator Tubular technical compasses pens Adopter Dec 2007 Dec 2009 for Aug 2010 2
92.
IS 8691:1986
93. 94. 95.
IS 8916:1978 IS 9107:1979 IS/ISO 9176:1988
96.
IS/ISO 9177-1: 1989
Mechanical pencils : part 1 Classification, May 2011 dimensions, performance requirements and testing Mechanical pencils : part 2 Black leads May 2011 Classification and dimensions Mechanical pencils : part 3 Black leads Aug 2010 Bonding strength of HB lead
97.
IS/ISO 9177-2: 1989
98.
IS/ISO 9177-3: 1989
SL. NO. 99.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENT
IS/ISO 9178-1:1988
Templates for lettering and symbols: Part 1 May 2011 General principles and identification markings Templates for lettering and symbols: Part 2 May 2011 Slot widths for wood cased pencils, clutch pencils and fine lead pencils Templates for lettering and symbols: Part 3 May 2011 Slot widths for technical pens with tubular tips in accordance with ISO 9175-1 Technical drawings Numerically controlled May 2011 draughting machines Part 1 Vocabulary Black leads for wood-cased pencils Aug 2010 Classification and diameters Specification for laboratory balance Specification for sextant Dec 2007 Dec 2007
100.
IS/ISO 9178-2:1988
101.
IS/ISO 9178-3:1988
102.
IS/ISO 9179-1: 1988
103.
IS/ISO 9180:1988
104. 105. 106.
IS 9440:1979 IS 9441:1979 IS 9514:1980
Specification for front surface aluminized Aug 2005 mirrors Specification for photoelectric colorimeters Aug 2010 (single beam) Specification for teritary level Specification for primary level Aug 2010 Aug 2010
107.
IS 9571:1980
108. 109. 110.
IS 9607:1980 IS 9613:1980 IS 9680:1980
Materials for light duty springs for instrument Dec 2009 industry Optics and optical instruments Geodetic Aug 2010 instruments vocabulary Specification for laboratory weights Specification for subtense bar Dec 2007 Sep 2008
111.
IS/ISO 9849:1991
112. 113.
IS 9865:1981 IS 9892:1981
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENT
114. 115.
IS 9898:1981 IS/ISO 9960-1:1992
Specification for helictrope surveying
Sep 2008
Draughting instruments with or without Nov 2006 graduation: Part 1 Droughting scale rules (Superseding IS 1482:1985) Manually operated draughting machines: Part Aug 2010 1 Definitions classification and designation Manually operated draughting machines: Part Nov 2006 2 Characteristics performance, inspection and marking (Superseding IS 2287:1970) Manually operated draughting machines : Part Nov 2006 3 dimensions of scale rule check plates Procedure for basic climatic and durability Dec 2010 tests for optical instruments: Part 1 General Procedure for basic climatic and durability Dec 2009 test for optical instruments: Part 2 Dry heat test Procedure for basic climatic and durability Dec 2010 test for optical instruments: Part3 Cold test Procedure for basic climatic and durability Dec 2010 test for optical instruments Part 4 Damp heat test Procedure for basic climatic and durability Dec 2010 test for optical instruments: Part 5 Damp heat (cyclic) test Procedure for basic climatic and durability Dec 2010 test for optical instruments: Part 6 Salt mist test
116.
IS/ISO 9962-1:1992
117.
IS/ISO 9962-2:1992
118.
IS/ISO 9962-3:1994
119.
IS 10236(PT 1):1989
120.
IS 10236(PT 2):1982
121.
IS 10236(PT 3):1982
122.
IS 10236(PT 4):1982
123.
IS 10236(PT 5):1982
124.
IS 10236(PT 6):1982
Procedure for basic climatic and durability Dec 2010 test for optical instruments: Part 7 Mould growth test *INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS 93
125.
IS 10236(PT 7):1983
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENT
126.
IS 10236(PT 8):1983
Procedure for basic climatic and durability Dec 2010 test for optical instruments: Part 8 Thermal shock (rapid change of temperature test Procedure for basic climatic and durability Dec 2010 test for optical instruments: Part 9 Low air pressure (altitude) test Procedure for basic climatic and durability Aug 2010 test for optical instruments: Part 10 Bump test Procedure for basic climatic and durability Aug 2010 test for optical instruments: Part 11 Vibration test Procedure for basic climatic and durability Aug 2010 test for optical instruments: Part 12 Shock test Procedure for basic climatic and durability Aug 2010 test for optical instruments: Part 13 Dust test Procedure for basic climatic and durability Aug 2010 test for optical instruments: Part 14 Driving rain test Procedure for basic climatic and durability Sep 2008 test for optical instruments: Part 15 Drop test Procedure for basic climatic and durability Sep 2008 test for optical instruments: Part 16 Solar radiation test Procedure for basic climatic and durability Sep 2008 test for optical instruments: Part 17 Acceleration (steady state test) Procedure for basic climatic and durability Sep 2008 test for optical instruments: Part 18 Sealing test
127.
IS 10236(PT 9): 1983
128.
IS 10236(PT 10): 1985
129.
IS 10236(PT 11): 1985
130.
IS 10236(PT 12): 1985
131.
IS 10236(PT 13): 1986
132.
IS 10236(PT 14): 1986
133.
IS 10236(PT 15): 1986
134.
IS 10236(PT 16): 1988
135.
IS 10236(PT 17): 1988
136.
IS 10236(PT 18): 1988
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENT
137.
IS 10679:1983
Specification for photoelectric Dec 2009 spectrophotometer single beam type Specification for pocket stereoscope Specification for tuning fork Dec 2009 May 2011 1
138. 139. 140.
IS 10695:1983 IS 10995:1984 IS 10996:1984
Specification for stop clock with fly back May 2011 action Optics and optical instruments Lasers and laserMay 2011 related equipment Vocabulary and symbols Specification for laboratory stands (metallic) May 2011
141.
IS/ISO 11145:1994
142. 143.
IS 11152:1984 IS 11444:1985
Specification for grinding and polishing Aug 2010 materials for optical components Specification for parallax bar Dec 2010
144. 145.
IS 11445:1985 IS 11781:1986
Specification for stencil templates and pen Aug 2010 tips Specification for 4-metric leveling staff Aug 2005 (telescopic) Specification for stencil geometrical figures templates for Sep 2008
146.
IS 11961:1986
147.
IS 12353:1988
148. 149.
IS 12397: 1988 IS 12398:1988
Specification for metallic dissecting type
May 2011
Specification for multi purpose mercury May 2011 barometer (For educational use) Specification for tripod stands Classification and application of hard cutting materials for metal removal with defined cutting edges Designation of the main groups and groups of application Dec 2008
150. 151.
IS 12399:1988 IS 12428:2007 / ISO 513: 2004
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENT
152.
IS 12713:1989
Optical instruments - Permissible cosmetic Dec 2009 defects and inspection of optical components Optical and mathematical instruments - Dec 2009 telescopic alidade - Specification Optical and Mathematical Instruments - Short Dec 2009 Range Infrared Distance Measuring Instruments - Specification Photography - Over head projectors: Part 1 Aug 2010 Projection stages Dimensions Photography - Over head projectors: Part 2 Projection stages Transparencies and transparencies frames Aug 2010
153.
IS 12874:1989
154.
IS 12888:1989
155.
IS 13011(PT 1):1990 /ISO 7943-1:1987 IS 13011(PT 2):1990 /ISO 7943-2:1987
156.
157.
IS 13011(PT3): 1990
Photography - Over head projectors: Part 3 Aug 2010 Projection stages Film rolls cores and windows Dimensions Optics and optical instruments Microscopes: Nov 2007 Part 1 Immersion oil for general use in light microscopy (first revision) Microscopes connecting dimensions of tube Aug 2010 slides and tube slots Raw optical glass - Resistance to attack by Dec 2009 aqueous alkaline phosphate-containing detergent solutions at 50oC - Testing and classification Educational instruments and equipment Aug 2010 Wire gauze for school and laboratory use Specification Raw optical glass - testing of the resistance to Dec 2009 attack by Aqueous Solutions at 25oC and classification
158.
IS 13108(PT1): 2002 /ISO 8036-1:1998
159.
IS 13117:1991 /ISO 8040:1986 IS 14146:1994 /ISO 9689:1990
160.
161.
IS 14253:1995
162.
IS 14258:1995 /ISO 8424:1987
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENT
163.
IS 14260:1995 /ISO 9385:1990 IS 14440:1997
Glass and glass-ceramics - Knoop hardness Dec 2009 test Drawing Instruments - Tubular tips for hand Jan 2008 held technical pens using India ink on tracing paper - Specification Black-board for class rooms - Specifications May 2009
164.
165. 166.
IS 14633:1999 IS 14819:2000 /ISO 11670:1999
Optics and optical instruments - Lasers and July 2010 Laser Related equipment Test Method for laser beam parameters beam positional stability Optics and optical instruments - Lasers and July 2010 Laser related equipment Test method for laser Beam Parameters: Beam widths, Divergence Angle and Beam Propagation Factor Optics and optical instruments Jun 2010 Environmental test methods Combined shock, bump or free fall and dry heat or cold Optics and optical instruments Jun 2010 Environmental test methods Combined digitally controlled broad-band random vibration and dry heat or cold (Adoption of ISO 9022-15:1998) Optics and optical instruments Jun 2010 Environmental test methods Combined sinusoidal vibration and dry heat or cold Specification for Hindi (Devnagri) stencil Oct 2010 Templates and pen tips Optics and optical instruments Laser and May 2011 laser related equipment Test methods for laser beam power, energy and temporal characteristics
167.
IS 14820:2000 /ISO 11146:1999
168.
IS 14821:2000 /ISO 9022-13:1998
169.
IS 14822:2000 /ISO 9022-15:1998
170.
IS 14823:2000 /ISO 9022-10:1998 IS 14859:2000
171.
172.
IS 14963:2001 /ISO 11554:1998
SL. NO. 173.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENT
IS 14964:2001 / ISO 12844:1999
Raw optical glass Grind ability with May 2011 diamond pellets Test methods and classification Laser and laser related equipment Test May 2011 methods for laser beam parameters Polarization Optics and optical instruments May 2011 Environmental test methods Combined bounce or steady - state acceleration and dry heat or cold Optics and optical instruments May 2011 Environmental test methods Combined Low pressure and ambient temperature or dry heat Spring balance Tension type (for use in May 2007 schools) - Specification Decimeter cube vessel (for use in schools) Dec 2006 Specification Kerosene heating lamp for use in schools and Oct 2007 colleges - Specification Magnet (for use in schools and colleges) Nov 2007 Specification (Bilingual) Optics and optical instruments Microscopes Dec 2007 Slides Part 1 Dimensions, optical properties and marking Optics and optical instruments Microscopes Dec 2007 Slides: Part 2 Quality of material, standards of finish and mode of packaging Optics and optical instruments Microscopes Feb 2008 Magnification 1
174.
IS 14965:2001 / ISO 12005:1998
175.
IS 14966:2001 / ISO 9022-16:1998
176.
IS 14967:2001 /ISO 9022-21:1998
177.
IS 15084:2002
178.
IS 15085:2001
179.
IS 15197:2002
180.
IS 15242:2002
181. * *
IS 15268(Pt 1): 2002 / ISO 8037-1:1986
182. * *
IS 15268(Pt 2): 2002 /ISO 8037-2:1997
183.
IS 15269:2002 /ISO 8039:1997
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENT
184. * *
IS 15270(Pt 1):2002 /ISO 8255-1:1986
Optics and optical instruments Microscopes Nov 2007 Cover glasses: Part 1 Dimensional tolerances thickness and optical properties Optics and optical instruments Microscopes Nov 2007 Cover glasses: Part 2 Quality of material, standards of finish and mode of packaging Optics and optical instruments - Ancillary July 2009 devices for geodetic instruments - Part 1 Inver levelling staffs Optics and optical instruments - Ancillary July 2009 devices for geodetic instruments - Part 2 Tripods
185. * *
IS 15270(Pt 2): 2002 /ISO 8255-2:1997
186.
IS 15483(Pt 1): 2004 /ISO 12858-1:1999
187.
IS 15483(Pt 2): 2004 /ISO 12858-2:1999
*INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICAES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS 99
PGD 23 SCOPE
HOROLOGY SECTIONAL COMMITTEE
a) Formulation of standards for time measuring, time keeping and time recording devices b) Coordination of work with: i) ISO/TC 114/SC 3 Water resistant watches ii) ISO/TC 114/SC 5 Luminescence iii) ISO/TC 114/SC 6 Precious metal covering iv) ISO/TC 114/SC 11 Indication of accuracy v) ISO/TC 114/SC 13 Watch glasses
CORRESPONDING ISO COMMITTEE(S): ISO/TC 114 Horology SL. NO. IS NO./DOC NO. TITLE REAFFIRM NO. OF AMEND MENTS
STANDARDS PUBLISHED 1. IS 9243(Pt 1):1987
Method of test for wrist watches Part 1: Antimagnetic (first revision) Method of test for wrist watches Part 2: Shock resistant (first revision) Method of test for wrist watches Part 3: Water resistant (first revision) Symbolization of control positions for time-keeping instruments Specification for Horological jewels Part 1: Functional and non-functional jewels (Definition) Wrist watches Horological jewels Part 2: Types and dimensions (first revision) Horology Redioluminescene for timekeeping instruments- Specifications (first revision) Dimensions for lugs for wrist watch case
Dec 2006
2.
IS 9243(Pt 2):1987
Dec2006
3.
IS 9243(Pt 3):1987
Dec 2006
4.
IS 9261:1979
Dec 2006
5.
IS 9263(Pt 1):1979 | ISO 1112: 1974
Dec 2006
6.
IS 9263(Pt 2):1999
Aug 2009
7.
IS 9275:1996
Dec 2006
8. 9.
IS 9641:1980 IS 9642:1980
Dec 2006
Dimensions for case pipe for wrist watch Dec 2006 case *INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS 100
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
10.
IS 9672:1980
Dimensions for movements for wrist watches Crown for wrist watch case Nomenclature of parts for wrist watches Classification of wrist watch cases Dimensions for threads for back cover and bezel for watch cases
Dec 2006
11. 12. 13. 14.
IS 9673:1980 IS 9783:1981 IS 10361:1983 IS 10362:1982
Dec 2006 Dec 2006 Feb 2010 Dec 2006 3
15.
IS 10363:1982
Dimensions for fixing devices for threaded Dec 2006 back covers for watch cases Dimensions for snap type back cover and bezel for watch cases (first revision) Dimensions for packing ring and housing for back cover joint for watch cases Watch cases Crystal and dial opening diameters Dimensions (first revision) Dimensions for crystal and dial openings shaped or circular for watch cases Dimensions for movement holders for watch cases Specification for one day alarm clocks Wrist watches Spring bars for watch cases and strap Specification (first revision) Dimensions for fixing watch hands O-rings for wrist watch crowns and push buttons June 2006
16.
IS 10364:2001
17.
IS 10365:1982
Dec 2006
18.
IS 10366:1995
Feb 2010
19.
IS 10367:1983
Feb 2010
20.
IS 10368:1983
Mar 2008
21. 22.
IS 10863:1984 IS 10865:1998
Mar 2008 Mar 2008
23. 24.
IS 11439:1985 IS 11562:1985
Dec 2006 Dec 2006 1
SL. NO. 25.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
IS 11681:1986 /ISO 6426-2:1984 IS 12114(Pt 1):1987 |ISO 3160-1: 1982
Techno-commercial definitions of horology Vocabulary Specification for Gold alloy coverings on watch cases and their accessories Part 1: General requirements Specification for Gold alloy coverings on watch cases and their accessories Part 2: Determination of fineness, thickness and corrosion resistance Dimensions for lengths of hands of clocks Connection dimensions, fits and dimensions combinations of hands for clock Specification for bushing for clock hands Specification for wall clocks battery operated Horological vocabulary Part 1: Technical and scientific definitions Wrist watches and watch movements Specification Part 1: Mechanical watches Wrist watches and watch movements Specification Part 1: Electronic quartz Horology Watch straps Part 1: Leather straps Specification Horology Watch straps Part 2: Stainless steel Specification Horology Watch straps Part 3: Solid link strap Specification
Dec 2006
26.
Dec 2006
27.
IS 12114(Pt 2):1987 | ISO 3160-2: 1982
Dec 2006
28. 29.
IS 12471:1988 IS 12472:1988
Mar 2008 Mar 2008
30. 31.
IS 12477:1988 IS 12510:1988
Mar 2008 Mar 2008
32.
IS 12745(Pt 1):1988 /ISO 6426-1:1982 IS 13130(Pt 1):1991
Feb 2010
33.
Dec 2006
34.
IS 13130(Pt 2):1991
Dec 2006
35.
IS 13718(Pt 1):1993
Mar 2009
36.
IS 13718(Pt 2):1993
Mar 2009
37.
IS 13718(Pt 3):2002
June 2007
Basic and design profile of screw threads Apr 2006 for watch bezel and back covers *INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS 102
38.
IS 14338:1996
SL. NO. 39.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
IS 14339:1996
Horology Watch bezel and back cover gauges Technical supply conditions General Horology Gauges for watch bezel and back covers Dimensions and tolerances Horology Primary batteries Watch batteries Horology Divers watches
Mar 2006
40.
IS 14365:1996
Dec 2006
41.
IS 14558:1998 /ISO/DIS 14682:1996 IS 14559:1998 /ISO 6425:1996 IS 14560(Pt 1):1998
July 2008
42.
July 2008
43.
Horology Mineral and saphire glass for wrist watch cases Part 1: Dimensions, material and test procedure - Specification Horology Mineral and saphire glass for wrist watch cases Part 2: Gasket dimensions, material and test procedure Specification Plastic movement holder for wrist watch cases - Specification
Dec 2008
44.
IS 14560(Pt 2):1998
Oct 2008
45.
IS 15064:2002
Jan 2007
DRAFT STANDARDS COMPLETED WIDE CIRCULATION Doc: PGD 23(1165) Doc: PGD 23(1166) Mineral and sapphire watch-glasses Part 1 Dimensions and tolerances Mineral and sapphire watch-glasses Part 2 Assembly to the case by adhesive or using a gasket Mineral and sapphire watch-glasses Part 3 Qualitative criteria and test methods
Doc: PGD 23(1167)
PGD 24
DRAWINGS SECTIONAL COMMITTEE
SCOPE : a) Formulation of code of practice for general engineering drawings and related standards b) Co-ordination of work with: i) ISO/TC 10 Technical product documentation and it subcommittees ii) ISO/TC 213 Dimensional and geometric product specification and verification CORRESPONDING ISO COMMITTEES: ISO/TC 10 Technical product documentation ISO/TC 10/ SC 1 Basic conventions ISO/TC 10/ SC 6 Mechanical engineering conventions ISO/TC 10/ SC 8 Construction documentation ISO/TC 10/SC 10 Technical product documentation (tpd)- symbols ISO/TC 213 Dimensional and geometric product specification and verification SL. NO. IS NO./DOC NO. TITLE REAFFIRM NO. OF AMENDM ENTS
STANDARDS PUBLISHED 1. * SP 46:2003 * 2. IS 7840:1983 /ISO 6414:1982 * IS 8000(Pt 1):1985 /ISO 1101:1983
Engineering drawing practice for schools and colleges (first revision) Technical drawings for glassware (first revision)
July 2008
Mar 2009
3.
Geometrical tolerancing on technical May 2011 drawings Part 1 Tolerances of form, orientation, location and run-out, and appropriate geometrical definitions (first revision) Geometrical tolerancing on technical Mar 2008 drawings Part 2 Maximum material principles (first revision) Technical drawings Geometrical Mar 2008 tolerancing Part 3 Dimensioning and tolerancing of profiles (second revision) Geometrical tolerancing on technical May 2011 drawings Part 4 Practical examples of indications on drawings 1
4.
IS 8000(Pt 2):1992 /ISO 2692:1988
5.
IS 8000(Pt 3):1992 /ISO 1660:1987
6.
IS 8000(Pt 4):1976
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMENDM ENTS
7.
IS 8930(Pt 1):1995 /ISO 10209-1:1992
Technical product documentation Mar 2008 Vocabulary Part 1 Terms relating to technical drawings : General and types of drawings (first revision) Technical product documentation Vocabulary Part 2: Terms relating to projection methods Technical product documentation Vocabulary Part 4: Terms relating to construction documentation Jan 2012
8.
IS 8930(Pt 2):2001 /ISO 10209-2:1993
9.
IS 8930(Pt 4):2006 /ISO 10209-4:1999
Jan 2012
10.
IS 8976:1978
Guide for preparation and arrangement of Jan 2012 sets of drawings and parts lists Technical product documentation Part 0: Jan 2012 General requirements Technical product documentation Jan 2012 Lettering Part 1 Latin alphabet, numeral and marks (second revision) Technical product documentation Lettering Part 2 Greek alphabet (first revision) Jan 2012
11.
IS 9609 (Pt 0):2001 /ISO 3098-0:1997 IS 9609(Pt 1):2006 /ISO 3098-2:2000
12.
13.
IS 9609(Pt 2):2006 /ISO 3098-3: 2000
14.
IS 9609(Pt 3) :2006 /ISO 3098-4: 2000
Technical product documentation Jan 2012 Lettering Part 3 Diacritical and particular marks for the Latin alphabet (first revision) Technical product documentation Lettering Part 4 Cyrillic alphabet (first revision) Jan 2012
15.
IS 9609(Pt 4):2006 /ISO 3098-6: 2000
16.
IS 9609(Pt 5):1998
Technical product documentation Part Aug 2008 Lettering on technical drawings Part 5: Amplified devnagri letters
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMENDM ENTS
17.
IS 9609(Pt 6): 2001 /ISO 3098-5:1997
Technical product documentation Jan 2012 Lettering Part 6: CAD lettering of the Latin alphabet, numerals and marks Requirements to execute technical May 2011 drawings for microcopying (first revision) Technical product documentation - Sizes and layout of drawing sheets (first revision) Presentation of item references on technical drawings Scales for use on technical drawings Jan 2012
18.
IS 10164:1985 /ISO 6428-1982 IS 10711:2001 /ISO 5457:1999
19.
20.
IS 10712:1983 /ISO 6433:1981 IS 10713:1983 /ISO 5455:1979 IS 10714(Pt 1): 2006 /ISO 128-1:2003
Mar 2009
21.
Mar 2009
22.
Technical drawings General principles of presentation Part 1: Introduction and index Technical drawings General principles of presentation Part 20: Basic conventions for lines Technical drawings General principles of presentation Part 21: Preparation of lines by CAD systems Technical drawings General principles of presentation Part 22: Basic conventions and applications for leader lines and reference lines Technical drawings General principles of presentation Part 23: Lines on construction drawings
Jan 2012
23.
IS 10714(Pt 20): 2001 /ISO 128-20:1996
Jan 2012
24.
IS 10714(Pt 21):2001 /ISO 128-21:1997
Jan 2012
25.
IS 10714(Pt 22):2006 /ISO 128-22:1999
Jan 2012
26.
IS 10714(Pt 23):2006 /ISO 128-23:1999
Jan 2012
27.
Technical drawings General principles Jan 2012 of presentation Part 25: Lines on shipbuilding drawings *INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS 106
IS 10714(Pt 25):2006 /ISO 128-25:1999
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMENDM ENTS
28.
IS 10714(Pt 30):2006 /ISO 128-30:1999
Technical drawings General principles of presentation Part 30: Basic conventions for views Technical drawings General principles of presentation Part 34: Views on mechanical engineering drawings Technical drawings General principles of presentation Part 40: Basic conventions for cut and sections Technical drawings General principles of presentation Part 44: Sections on mechanical engineering drawings Technical drawings Screw threads and threaded parts Part 1 General conventions (first revision) Technical drawings Screw threads and threaded parts Part 2 Screw thread inserts Technical drawings Screw threads and threaded parts Part 3 Simplified representation Technical product documentation Springs Part 1 Simplified representation (first revision) Technical product documentation Springs Part 2 Presentation of data for cylindrical helical compression springs Technical product documentation Springs Part 3 Vocabulary
Jan 2012
29.
IS 10714(Pt 34):2006 /ISO 128-34:1999
Jan 2012
30.
IS 10714(Pt 40):2006 /ISO 128-40:2001
Jan 2012
31.
IS 10714(Pt 44):2006 /ISO 128-44:2001
Jan 2012
32.
IS 10715(Pt 1): 1999 /ISO 6410-1:1993
Jan 2010
33.
IS 10715(Pt 2): 1999 /ISO 6410-2:1993
Jan 2010
34.
IS 10715(Pt 3): 1999 /ISO 6410-3:1993
Jan 2010
35.
IS 10716(Pt 1): 1999 /ISO 2162-1:1993
Jan 2010
36.
IS 10716(Pt 2):1999 ISO 2162-2:1993
Jan 2010
37.
* *
IS 10716(Pt 3): 1999 /ISO 2162-3:1993
Jan 2010
38.
IS 10717:1983 Conventional representation of gears on Mar 2009 /ISO 2203:1973 technical drawings *INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS 107
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMENDM ENTS
39.
* * *
IS 10718:1993 /ISO 3040:1990 IS 10719:1983 /ISO 1302:1978 IS 10720:1999 /ISO 5261:1995
Technical drawings Dimensions and tolerancing of cones (first revision) Method of indicating surface texture on technical drawings Technical drawings Simplified representation of bars and profile sections (first revision) Datum and datum systems for geometrical tolerancing on technical drawings Graphical symbols for elements of kinematic diagrams, Part 1 Graphical symbols for elements of kinematic diagrams, Part 2 Graphical symbols for kinematic diagrams, Part 3 Graphical symbols for elements of kinematic diagrams, Part 4 Guide for the preparation of variant drawings Drawing practice for simplified presentation Technical drawings Simplified representation of pipelines Part 1 General rules and orthogonal representation (first revision) Technical drawings Simplified representation of pipelines Part 2 Isometric projections (first revision)
Mar 2009
40.
Mar 2009
41.
Jan 2010
42.
* *
IS 10721:1983 /ISO 5459-1981 IS 10722(Pt 1): 1983 /ISO 3952-1-1981 IS 10722(Pt 2):1983 /ISO 3952-2-1981 IS 10722(Pt 3): 1983 /ISO 3952-3-1979 IS 10722(Pt 4): 1985 /ISO 3952-4-1984
Mar 2009
43.
May 2011
44.
Mar 2009
45.
Mar 2009
46.
May 2011
47.
IS 10967:1984
May 2011
48.
IS 10968:1984
Mar 2008
49.
IS 10990(Pt 1): 1991 /ISO 6412-1:1989
Mar 2008
50.
IS 10990(Pt 2): 1992 /ISO 6412-2:1989
Mar 2008
SL. NO. 51.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMENDM ENTS
IS 10990(Pt 3): 2001 /ISO 6412-3:1993
Technical drawings Simplified representation of pipelines Part 3: Terminal features of ventilation and drainage systems Nameplates Dimensions Part 1 Square and rectangular nameplates (first revision) Nameplates Dimensions Part 2 Circular nameplates (first revision) Nameplates Dimensions Part 3 Triangular nameplates (first revision)
Jan 2012
52.
IS 11154 (Pt 1): 1994
Jan 2010
53.
IS 11154(Pt 2): 1994
Jan 2010
54.
IS 11154(Pt 3): 1994
Jan 2010
55.
IS 11154(Pt 4): 1994
Nameplates Dimensions Part 4 Elliptical Jan 2010 and segmental nameplates (first revision) Proportions and dimensions of symbols for geometrical tolerancing used in technical drawings Conventional representations of common features and materials on technical drawings Folding of drawing prints Technical product documentation-Data fields in title blocks and document headers (first revision) Technical drawings Item lists May 2011
56.
IS 11158:1984 /ISO 7083:1983
57.
IS 11663:1986
Mar 2009
58. 59.
IS 11664:1986 IS 11665:2009 /ISO 7200:2004
Mar 2009 -
60.
* *
IS 11666:1985 /ISO 7573-1983 IS 11667:1991 /ISO 406-1987
May 2011
61.
Technical drawings Linear and angular tolerancing Indication on drawings (first revision) Technical drawings Simplified representation of centre holes General principles of dimensioning on technical drawings
Mar 2008
62.
IS 11668:1985 /ISO 6411-1982 * IS 11669:1986 /ISO 129-1985
May 2011
63.
Mar 2009
109
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMENDM ENTS
64.
IS 11670:1993
Technical drawings Abbreviations and symbols for use in technical drawings (first revision) Technical drawings - Fundamental tolerancing principle Simplified presentation of technical documents Part 2 Guide for preparation of order drawings for bought-out parts Technical drawings Representation of splines and serrations Geometrical Product Specification (GPS) Geometrical tolerancing Positional tolerancing (first revision) Technical drawings Rolling bearings Part 1 General simplified representation Technical drawings Rolling bearings Part 2 Detailed simplified representation Technical drawings Seals for dynamic application Part 1 General simplified representation Technical drawings Seals for dynamic application Part 2 Detailed simplified representation Technical drawings Corners Vocabulary and indication on drawings Technical drawings Tolerancing of orientation and location Projected tolerance zone
Mar 2009
65.
* * *
IS 12160:1987 /ISO 8015-1985 IS 12461(PT 2): 1988
Mar 2009
66.
May 2011
67.
IS 13088:1991 /ISO 6413:1988 IS 13099:2001 /ISO 5458:1998
Mar 2008
68.
Jan 2012
69.
IS 13637(Pt 1): 1993 /ISO 8826-1:1989 IS 13637(Pt 2): 1999 /ISO 8826-2:1994 IS 13638(Pt 1): 1993 /ISO 9222-1:1989
Mar 2009
70.
Jan 2010
71.
Mar 2009
72.
IS 13638(Pt 2): 1993 /ISO 9222-2:1989
Mar 2009
73.
* *
IS/ISO 13715:1994
Jan 2010
74.
IS 13847:1993 /ISO 10578:1992
Mar 2009
75.
Technical drawings Indication for Jan 2012 revision of drawings *INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS 110
IS 14412:1996
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMENDM ENTS
76.
* *
IS 14722:1999 /ISO 10135:1994
Technical drawings Simplified representation of moulded, cast and forged parts Technical drawings Projection methods Part 1: Synopsis Technical drawings Projection methods Part 2: Orthographic representations Technical drawings Projection methods Part 3: Axonometric representations Technical drawings Projection methods Part 4: Central projections Design of graphical symbols for use in the technical product documentation of products Part 1: Basic rules Technical drawings Simplified representation of the assembly of parts with fasteners Part 1: General principles Technical drawings Simplified representation of the assembly of parts with fasteners Part 2: Rivets for aerospace equipment Technical product documentation Handling of computer-based technical information Part 1: Security requirements Technical product documentation Handling of computer-based technical information Part 2: Original documentation
Jan 2010
77.
IS 15021 (Part 1): 2001 /ISO 5456-1:1996 IS 15021 (Part 2): 2001 /ISO 5456-2:1996 IS 15021 (Part 3): 2001 /ISO 5456-3:1996 IS 15021 (Part 4): 2001 /ISO 5456-4:1996 * IS 15022 (Part 1): 2001 /ISO/IEC 11714-1: 1996 IS 15023 (Part 1): 2001 /ISO 5845-1:1995
Jan 2012
78.
Jan 2012
79.
Jan 2012
80.
Jan 2012
81.
Jan 2012
82.
Jan 2012
83.
IS 15023 (Part 2): 2001 /ISO 5845-2:1995
Jan 2012
84.
IS 15024 (Pt 1):2001 /ISO 11442-1:1993
Aug 2006
85.
IS 15024 (Part 2): 2001 /ISO 11442-2:1993
Oct 2006
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMENDM ENTS
86.
IS 15024 (Part 3): 2001 /ISO 11442-3:1993
Technical product documentation Handling of computer-based technical information Part 3: Phases in the product design process Technical product documentation Handling of computer-based technical information Part 4: Document management and retrieval systems Technical product documentation Requirements for computer-aided design and draughting Vocabulary Technical drawings Dimensioning and tolerancing Non-rigid parts Technical drawings Geometrical tolerancing Tolerancing of form, orientation, location and run-out Verification principles and methods Guidelines Construction drawing spaces for drawing and for text and title blocks on drawing sheets Technical drawings Edges of undefined shape Vocabulary and indications.
Aug 2006
87.
IS 15024 (Part 4): 2001 /ISO 11442-4:1993
Aug 2006
88.
IS15025:2001 /ISO/TR 10623: 1991
Aug 2006
89.
IS 15044:2001 /ISO 10579:1993 IS 15054:2001 /ISO/TR 5460: 1985
Jan 2012
90.
Jan 2012
91.
IS 15093:2002 /ISO 9431:1990
Jan 2012
92.
IS 15726:2006 /ISO 13715:2000
Jan 2012
DRAFT STANDARDS UNDER PRINTING Doc No.: PGD 24(1160) / ISO 13567-1: 1998 Doc No. PGD 24 (1161) / ISO 13567-2: 1998 Doc No. PGD 24 (1162) / ISO 15785:2002 Doc No. PGD 24 (1163) / ISO 11442:2006 Technical product documentation Organization and naming of layers for CAD Part 1: Overview and principles Technical product documentation Organization and naming of layers for CAD Part 2: Concepts, format and codes Technical drawings Symbolic presentation and indication of adhesive, fold and pressed joints Technical Product Documentation Document management
112
DRAFT STANDARDS FINALIZED FOR PRINTING DOC: PGD 24 (1159)/ ISO Technical drawings General principles of presentation Part 24: Lines on 128-24:1999 mechanical engineering drawings DRAFT STANDARDS COMPLETED WIDE CIRCULATION DOC: PGD 24 (1126)/ ISO Technical drawings Indication of dimensions and tolerances Part 1: General 129-1:2004 principles(first revision of IS 11669) DRAFT STANDARDS UNDER WIDE CIRCULATION Doc: PGD 24 (1205)/ ISO Technical product documentation Organization and naming of layers for 13567-3: 1999 CAD Part 3: Application of IS/ ISO 13567-1 and IS/ ISO 13567-2 Doc: PGD 24 (1206)/ ISO Geometrical Product Specifications (GPS) Indication of surface texture in 1302: 2002 technical product documentation (first revision of IS 10719)
113
PGD 25
ENGINEERING METROLOGY SECTIONALCOMMITTEE
SCOPE: a) Formulation of standards on limits and fits and on gauges for plain and threaded work pieces; precision measuring equipment; surface finish and other allied items. b) Co-ordination of work with: i) ISO/TC 213 Dimensional and geometrical product Specification and verification. CORRESPONDING ISO COMMITTEE(S): ISO/TC 213 Dimensional and Geometrical Product Specification and Verification. SL. NO. IS NO./DOC NO. TITLE REAFFIRM NO. OF AMEND MENTS
STANDARDS PUBLISHED 1. IS 2092:1983 Specification for plunger type dial gauges June 2008 (first revision) Specification for (second revision) Engineering straightedges revision) engineers squares Jun 2011 1
IS 2103:1980
IS 2220:1990
metrology Specification
Steel Mar 2010 (first
4.
IS 2251:1986
Specification for plug and ring gauges for Jun 2011 self holding tapers (first revision) Engineering metrology Measuring Aug 2008 equipment Cast iron surface plates Specification (third revision) ISO general purpose metric screw threads Jan 2007 Gauges and Gauging (second revision) Specification for cast iron angle plates Mar 2010 (first revision) Specification for vernier height gauges June 2008 (first revision) 1
5.
IS 2285:2003 /ISO 8512-1:1990
6.
IS 2334:2001 /ISO 1502:1996 IS 2554:1971
7.
IS 2921:1988
Engineering metrology Plain V-blocks Jun 2011 for inspection purposes Specification (second revision) *INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS 114
IS 2949:1992
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
10
IS 2966:1964
Specification for internal micrometers June 2008 (first revision) Specification for external micrometer June 2008 (first revision) Slip Gauges Specification [ISO Title : Dec 2008 Geometrical Product Specifications (GPS) Length Standards : Gauge Blocks] (second revision) Assessment of surface roughness Jun 2011
11
IS 2967:1983
12.
IS 2984:2003 /ISO 3650:1998
13. 14.
IS 3073:1967 IS 3179:1990
Engineering metrology Feeler gauges Mar 2010 (second revision) Gauging practice for plain work pieces (first revision) Jun 2011 4
15.
IS 3455:1971
16.
IS 3455(Pt 1): 1985
Gauging practice for plain workpieces Mar 2010 Part 1: Inspection of plain workpieces with indicating measuring instruments Plain and master setting ring gauges (size range from 1 up to and including 315mm) (second revision) June 2008
17.
IS 3485:1983
18.
IS 3510:1990
Engineering metrology Toolmakers Mar 2010 flats Specification (first revision) Tool makers straightedges June 2008 1 2
19. 20.
IS 3512:1966 IS 3651(Pt 1): 1982
Specification for vernier callipers Part 1: Mar 2010 Vernier callipers with least count 0.1mm and 0.05mm (second revision) Specification for vernier callipers Part 2: Mar 2010 Vernier callipers with least count 0.02mm
21.
IS 3651(Pt 2):1985
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
22.
IS 3651(Pt 3):1988
Specification for vernier callipers Part 3: June 2008 Vernier callipers with least count 0.1mm (measuring range above 1000mm upto and including 4000mm) Strip feeler gauges for electrical purposes June 2008 1
23. 24.
IS 4210:1967 IS 4211:1993
Gauges Thread pitch gauges for ISO June 2008 metric screw threads (pitch range 0.4 to 6mm) Specification (first revision) Engineering metrology Vernier depth gauges upto 300mm Specification (first revision) Specification for mechanical protractors (first revision) Mar 2010 1
25.
IS 4213:1991
26.
IS 4239:1970
bevel Jun 2008
27.
IS 4241:1998
Engineering metrology Engineers Mar 2010 parallels Specification (first revision) Cylindrical setting masters (first revision) Engineering metrology Precision equipment Slip gauge accessories (first revision) June 2008 Jan 2007
28 29.
IS 4349:1987 IS 4440:1996
30.
IS 4492:1968
Specification for welded V-blocks June 2008 (diameter range 300 to 2000mm) Specification for block squares (first June 2008 revision) Specification for universal and elongated Mar 2010 type V-blocks Specification for gauges for serrations June 2008 Part 1: For gauging external serrations
31.
IS 4563:1987
32.
IS 4960:1968
33.
IS 4966(Pt 1): 1968
34.
Specification for gauges for serrations June 2008 Part 2: For internal serrations *INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS 116
IS 4966(Pt 2): 1968
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
35.
IS 5268(Pt 1): 1991
Engineering metrology Straightedges Jun 2011 Part 1: Cast iron straightedges (bow shaped or camel back type and I-section or parallel type) (first revision) Specification for radius gauges Specification for sine bars (first revision) Aug 2009 June 2008
36. 37. 38.
IS 5273:1969 IS 5359:1987 IS 5388:1983
Specification for hexagonal handles for June 2008 plain and threaded plug gauges (second revision) Specification for optical flats Specification for optical bevel protracters Specification for single angle sine tables Mar 2010 Jun 2008 Jun 2011
39. 40. 41. 42.
IS 5440:1969 IS 5812:1970 IS 5939:1970 IS 5943:1970
1 2
Specification for compound angle sine Jun 2011 tables Specification revision) for sine centers (first Jun 2011
43.
IS 5979:1981
44.
IS 5980:1978
Specification for bench centers (first Mar 2010 revision) Gauging members for plain plug gauges June 2008 go and no go members (size range from 1 upto and including 40mm) (second revision) Specification for ISO metric screw thread June 2008 measuring prisms Specification for prismatic angle gauges June 2008 1
45.
IS 6137:1983
46.
IS 6150:1971
47. 48.
IS 6231:1971 IS 6232:1971
Specification for cast iron box angle June 2008 1 plates *INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS
117
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
49.
IS 6244:1980
Specification for gauging members for Jun 2011 plain plug gauges go and no go members (size range 40 to 100mm) (first revision) Specification for gauging members for Jun 2011 plain plug gauges go and no go members (size range above 120 upto 250mm) (first revision) Specification for ISO metric screw thread measuring cylinders (first revision) Mar 2010
50.
IS 6246:1980
51.
IS 6311:1978
52.
IS 6952:1990
Engineering metrology Cylindrical Jun 2011 squares Specification (first revision) Specification for precision angle plates Specification for precision box angle plates Specification for steel precision polygons Specification for length bars Mar2010 Mar 2010
53. 54.
IS 6973:1973 IS 6985:1973
55. 56. 57.
IS 6987:1973 IS 7014:1973 IS 7018(Pt 1): 1983
Mar 2010 Mar 2010 1
Technical supply conditions for gauges June 2008 Part 1: General (first revision) Technical supply conditions for gauges Part 2: Assembly and identification of plain plug gauges (size range from 1mm upto and including 250mm) (first revision) Technical supply conditions for gauges Part 3: Assembly and identification of screw plug gauges for ISO metric screw threads (size range from M1 upto and including M200mm) (first revision) June 2008
58.
IS 7018(Pt 2): 1983
59.
IS 7018(Pt 3):1983
June 2008
SL. NO. 60.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
IS 7327:2003 /ISO 8512-2:1990
Engineering metrology Measuring equipment Granite surface plates Specification (second revision) General requirements for engineers comparators with stands Part 1: Engineers comparators General requirements for engineers comparators with stands Part 2: Comparator stand Specification for length bar accessories Specification for plain adjustable snap gauges (first revision) Gauge allowances and manufacturing tolerances for plain gauges for inside measurements for ISO fit sizes (nominal size upto 500mm) Gauge allowances and manufacturing tolerances for plain gauges for outside measurements for ISO fit sizes (nominal size upto 500mm) Gauges Single ended progressive type plate snap gauges (upto 160mm) Specification (first revision) Vocabulary for basic and general terms in dimensional metrology (first revision) Specification for triangular straightedges Pipe threads where pressure tight joints are made on threads Part 2 Verification by means of gauges (first revision)
Aug 2008
61.
IS 7599(Pt 1):1975
Jun 2011
62.
IS 7599(Pt 2): 1975
Jun 2011
63. 64.
IS 7604:1975 IS 7606:1982
Jun 2011 Jun 2011
65.
IS 7859:1975
Jan 2010
66.
IS 7876:1975
Mar 2010
67.
IS 8023:1991
Mar 2010
68.
IS 8378:1987
June 2008
69. 70.
IS 8823:1978 IS 8999:2003 /ISO 7-2:2000
Mar 2010 Sep2008
Specification for plug and ring gauges for Jun 2011 self release 7/24 tapers (first revision) *INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS 119
71.
IS 9475:1986
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
72.
IS 9483:1993
Measuring instruments Micrometer Mar 2010 heads Specification (first revision) Specification for taper plug gauges and Jun 2011 taper ring gauges to check taper bore of gauge handles and taper shanks of gauging members Specification for gauging members for go and no go screw plug gauges and screw check plug gauges for ISO metric screw threads (size range above M40 upto and including M120) (first revision) Mar 2010
73.
IS 9529:1980
74.
IS 9608:1985
75
IS 9610:1985
Specification for go and no go screw ring Mar 2010 gauges for ISO metric screw threads (size range from M1 upto and including M100) (first revision) Specification for gauging members for go June 2008 and no go screw plug gauges and screw check plug gauges for ISO metric screw threads (size range from M1 upto and including M40) (first revision) Gauging practice for pipe threads where pressure tight joints are not made on threads (first revision) Mar 2010
76.
IS 9631:1983
77.
IS 10216:1988 /ISO 228-2:1987
78.
IS 10275:1982
Specification for methods for assessment Jun 2011 of circularity error from polar graphs obtained by using stylus type form measuring instrument Specification for ring gauges for drill June 2008 chuck taper arbors of morse taper and Jacob taper type
79.
IS 10649:1983
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
80.
IS 10685:1983
Specification for gauging members for go June 2008 and no go screw plug gauges and screw check plug gauges for ISO metric screw threads (size range above M120 upto and including M200) Specification for cylindrical measuring Mar 2010 pins (size range from 0.1mm upto and including 20mm) Specification for lever type dial gauges Mar 2010 1
81.
IS 11103:1984
82. 83
IS 11498:1985 IS 12257(Pt 1): 1987
Pneumatic measurement Part 1: General Jun 2011 information on principles and methods Pneumatic measurement Part 2: Design Jun 2011 features of instruments working in high pressure range Pneumatic measurement Part 3: Jun 2011 Parameters of instruments working on high pressure Pneumatic measurement Part 4: General Jun 2011 information and examples of application
84
IS 12257(Pt 2) :1992
85.
IS 12257(Pt 3): 1992
86.
IS 12257(Pt 4): 1992
87.
IS 12257(Pt 5): 1996
Pneumatic measurement Part Glossary of terms and definitions
5: Jan 2007
88.
IS 12937:1990
Engineering metrology Methods of Mar 2010 testing straightness, flatness and perpendicularity Height setting micrometers and rising Mar 2010 blocks Specification Engineering metrology Dial snap gauges Mar 2010 specification
89.
IS 13907:1994 /ISO 7863:1984 IS 14271:1995
90.
121
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
91.
SP 19:1980
Guidelines for classification of quality of Jun 2011 scraped surfaces Co-ordinate metrology Part 2: Mar 2005 Performance assessment of coordinate measuring machines Geometrical product specifications (GPS) Dec 2007 Surface texture Profile method Nominal characteristics of contact (stylus) Geometrical product specification (GPS) Dec 2007 Surface texture: Profile method Terms, definitions and surface texture Geometrical product specification (GPS) Oct 2007 Surface texture: Profile method Rules and procedures for the assessment of surface texture Geometrical product specification (GPS) Nov 2007 Surface imperfections Terms, definitions and parameters Geometrical product specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 1: Decision rules for proving conformance of non-conformance with specifications Geometrical product specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 2: Guide to the estimation of uncertainty of measuring equipment and in product verification Aug 2008
92.
IS/ISO 10360-2: 1994
93.
IS 15261:2002 /ISO 3274:1996
94.
IS 15262:2002 /ISO 4287:1997
95.
IS 15263:2002 /ISO 4288:1996
96.
IS 15264:2002 /ISO 8785:1998
97.
IS 15371(Part 1): 2003 /ISO 14253-1:1998
98.
IS 15371(Part 2): 2007 /ISO/TS 14253-2:1999
122
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
99.
IS 15371(Part 3): 2007 /ISO/TS 14253-3:2002
Geometrical product specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 3: Guidelines for achieving agreements on measurement uncertainty statements Measurement of roundness Terms, definitions and parameters of roundness Aug 2008
100.
IS 15372:2003 /ISO 6318:1985 IS 15373:2003 /ISO 4291:1985
101.
Methods for the assessment of departure Aug 2008 from roundness Measurement of variations in radius Methods for the assessment of departure from roundness Measurement by two and three point methods Geometrical product specifications (GPS) Surface texture: Profile method Metrological characteristics of phase correct filters Accuracy (trueness and precision) of measurement methods and results Part 1: General principles and definitions Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method Accuracy (trueness and precision) of measurement methods and results Part 3: Intermediate measures of the precision of a standard measurement Aug 2008
102.
IS 15374:2003 /ISO 4292:1985
103.
IS 15375:2003 /ISO 11562:1996
Aug 2008
104.
IS 15393 (Pt 1): 2003 /ISO 5725-1:1994
Sep2008
105.
IS 15393 (Pt 2): 2003 /ISO 5725-2:1994
Oct 2008
106.
IS 15393 (Pt 3): 2003 /ISO 5725-3:1994
Sep 2008
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
107.
IS 15393 (Pt 4): 2003 /ISO 5725-4:1994
Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method
Sep 2008
108.
IS 15393 (Pt 5): 2003 /ISO 5725-5:1998
Sep 2008 Accuracy (trueness and precision) of measurement methods and results Part 5: Alternate methods for the determination of the precision of a standard measurement method Accuracy (trueness and precision) of measurement methods and results Part 6: Use in practice of accuracy values Geometrical product specifications (GPS) Surface texture: Profile method Surface having stratified functional properties Part 1: Filtering and general measurement conditions Geometrical product specifications (GPS) Surface texture: Profile method Surface having stratified functional properties Part 2: Height characterization using the linear material ratio curve Geometrical product specifications (GPS) Surface texture: Profile method Surface having stratified functional properties Part 3 Height characterization using the material probability curve Geometrical product specifications (GPS) Surface texture: Profile method Motif parameters Oct 2008
109.
IS 15393(Part 6): 2003 /ISO 5725-6:1994
110.
IS 15421(Part 1):2003 /ISO 13565-1:1996
Dec 2008
111.
IS 15421(Part 2):2003 /ISO 13565-2:1996
Dec 2008
112.
IS 15421(Part 3):2003 /ISO 13565-3:1998
Dec 2008
113.
IS 15422:2003 /ISO 12085:1996
Dec 2008
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
114.
IS 15423(Part 1): 2003 /ISO 5436-1-2000
Geometrical product specifications (GPS) Surface texture: Profile method Measurement standards Part 1: Material measures Geometrical product specifications (GPS) Surface texture: Profile method Measurement standards Part 2: Software measurement standards Geometrical product specifications (GPS) Acceptance and re-verification tests for coordinate measuring machines (CMM) Part 1: Vocabulary Geometrical product specifications (GPS) Acceptance and re-verification tests for coordinate measuring machines (CMM): Part 2: CMMs used for measuring size Geometrical product specifications (GPS) Acceptance and re-verification tests for coordinate measuring machines (CMM): Part 3: CMMs with the axis of a rotary table as the fourth axis
Dec 2008
115.
IS 15423(Part 2): 2003 /ISO 5436-2-2001
Nov 2008
116.
IS 15635(Part 1):2006 /ISO 10360-1:2000
Jun 2011
117.
IS 15635(Part 2):2006 /ISO 10360-2:2001
Jun 2011
118.
IS 15635(Part 3):2006 /ISO 10360-3:2000
Jun 2011
119.
IS 15635(Part 4):2006 /ISO 10360-4:2000
Geometrical product specifications (GPS) Jun 2011 Acceptance and re-verification tests for coordinate measuring machines (CMM): Part 4: CMMs used in scanning measuring mode Geometrical product specifications (GPS) Acceptance and re-verification tests for coordinate measuring machines (CMM): Part 5: CMMs using multiple-stylus probing systems Jun 2011
120.
IS 15635(Part 5):2006 /ISO 10360-5:2000
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
121.
IS 15635(Part 6):2006 /ISO 10360-6:2001
Geometrical product specifications (GPS) Acceptance and re-verification tests for coordinate measuring machines (CMM): Part 6 Estimation of errors in computing Gaussian associated features Geometrical product specifications (GPS) Surface texture: Profile method Calibration of contact (stylus) instruments
122.
IS 15759:2007 /ISO 12179:2000
DRAFT STANDARDS FINALIZED FOR PRINTING Doc: PGD 25( 0486) Engineering metrology Toolmakers Straightedges - Specification (first revision of IS 3512)
DRAFT AMENDMENT FINALIZED FOR PRINTING Doc: PGD 25( 1033) Geometrical product specifications (GPS) Surface texture: Profile method Measurement standards Part 2: Software measurement standards [Amendment No. 1 to IS 15635(Part 2):2006]
126
PGD 26
WEIGHTS AND MEASURES SECTIONAL COMMITTEE
SCOPE:
Formulation of standards for weights, measures, weighing and measuring equipments intended to be used in transactions or for industrial production or for protection.
CORRESPONDING ISO COMMITTEES: Nil
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENT
STANDARDS PUBLISHED 1. IS 1056:2004
Commercial weights Specification (third revision)
Oct 2009
2.
IS 1057:2004
Legal metrology Commercial carret weights Oct 2009 Specification (third revision) Legal metrology Commercial capacity Oct 2008 measures Specification (second revision) Legal metrology Commercial length Oct 2008 measures (non flexible) Specification (first revision) Metric dispensing measures Specification Oct 2008 (first rev Legal metrology Material measure of length July 2007 Part 1: Woven metallic and glass fibre tape measures (second revision) Legal metrology Material measure of length July 2007 Part 2: Steel tape measure (Superseeds IS 1270: 1965) Beam scales (second revision) Counter machines Feb 2006 Feb 2006 1
3.
IS 1058:1993
4.
IS 1059:1994
5.
IS 1160:1993
6.
IS 1269(Pt 1): 1997
7.
IS 1269(Pt 2): 1997
8. 9.
IS 1433:1990 IS 1434:1959
SL. NO. 10.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENT
IS 1435:1991
Platform weighing machines Specification Mar 2008 (first revision) Weigh bridges Specification (first revision) Automatic weighing machines Crane weighing machines Steelyards (first revision) Spring balances (first revision) Self-indicating and semi-self counter type weighing machines Mar 2008 Mar 2008 Mar 2008 Mar 2008 Mar 2008 indicating Mar 2008 1
11. 12. 13. 14. 15. 16.
IS 1436:1991 IS 1437:1967 IS 1438:1960 IS 1439:1990 IS 1702:1967 IS 1853:1961
17. 18.
IS 1854:1964 IS 2341:1963
Person-weighing machines (first revision)
Mar 2008
Large metric capacity calibrating measures Feb 2006 (non tilting type) Code of practice for calibration of vehicle Feb 2006 tanks for petroleum products and other liquid Baby weighing machines Mar 2008 1
19.
IS 2383:1963
20. 21.
IS 2489:1963 IS 2747:1990
Performance requirements for taximeters (first Feb 2006 revision) Accuracy requirements for bulk meters used in Feb 2006 petroleum trade General requirements for testing the accuracy Feb 2006 of commercial measuring instruments used in petroleum trade Accuracy requirements for dispensing pump Feb 2006 used in petroleum trade
22.
IS 2801:1967
23.
IS 3032:1965
24.
IS 3033:1965
Accuracy requirements for volumetric Feb 2006 container filling machines used in petroleum trade *INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS 128
25.
IS 3047:1965
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENT 1
26. 27. 28. 29.
IS 3515:1966 IS 3960:1967 IS 4070:1993 IS 4670:1993
Tapes for use in measurement of oil quantities Specification for totalizing weighing machines Specification for Wheel weighers Legal metrology Liquor Specification (first revision) measures
Feb 2006 Mar 2008 Mar 2008
Oct 2008
30.
IS 14439(Pt 1): 1997 Legal metrology Gas volume meters Oct 2007 Part 1: General requirements IS 14439(Pt 2): 1998 Legal metrology Gas volume meters Dec 2008 Part 2: Diaphragm gas meters IS 15672:2006 Flow Measurement of Natural Gas and Fluids by Coriolis Meter Flow Measurement of Natural Gas by Rotary Piston Meter Flow Measurement of Natural Gas by Ultrasonic Meter Flow Measurement of Natural Gas and Fluids by Orifice Plate Meters Flow Measurement of Natural Gas by Turbine Meters Metering of Natural Gas Code of Practice
31.
32.
33.
IS 15673:2006
34.
IS 15674:2006
35.
IS 15675:2006
36.
IS 15676:2006
37.
IS 15677:2006
DRAFT STANDARDS COMPLETED WIDE CIRCULATION Doc: PGD 26(1110) Specification for non-automatic weighing instruments Part 1 Terminology and definitions Specification for non-automatic weighing instruments Part 2 Metrological and technical requirements Specification for automatic gravimetric filling instruments Part 1 Terminology and definitions 129
Doc: PGD 26(1111)
Doc: PGD 26(1113)
Doc: PGD 26(1114)
Specification for automatic gravimetric filling instruments Part 2 Metrological and technical requirements Specification for automatic rail weigh bridges Part 1 Terminology and definitions Specification for automatic rail weigh bridges Part 2 Metrological and technical requirements
Doc: PGD 26(1139)
Doc: PGD 26(1140)
130
PGD 27
MOUNTAINEERING EQUIPMENT SECTIONAL COMMITTEE
SCOPE: Standardization in the field of mountaineering, skiing, adventure sports and recreational equipment. CORRESPONDING ISO COMMITTEE(S): NIL SL. NO. IS NO./DOC NO. TITLE REAFFIRM NO. OF AMEND MENT Sep 2006
Mountaineering Glossary of terms (first revision) Specification for General purpose carabiners for mountaineering Specification for Ice axe for mountaineering (first revision) Specification for Rock pitons for mountaineering (first revision) Specification for Ice axe-cum-hammer for mountaineering (first revision) Specification for Ice pitons for mountaineering (first revision) Specification for Snow stakes for mountaineering Specification for Tent poles for mountaineering Specification for descenders for mountaineering (first revision) Specification for tent pins for mountaineering Specification for piton hammers for mountaineering (first revision)
2.
IS 8533:1977
Sep 2006
3.
IS 8648:1987
Sep 2006
4.
IS 8905:1987
Sep 2006
5.
IS 8906:1987
Sep 2006
6.
IS 8907:1987
Sep 2006
7.
IS 8908:1978
Sep 2006
8.
IS 9090:1979
Sep 2006
9.
IS 9091:1987
Sep 2006
10. 11.
IS 9092:1979 IS 9248:1987
Sep 2006 Sep 2006
Dimensions for boot/binding interface (Greater Sep 2006 than size 36) for alpine skis *INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS 131
12.
IS 9315:1979
SL. NO. 13.
IS NO./DOC NO.
TITLE
IS 9317:2001
Glossary of terms, definitions and measuring conditions for skis Laboratory methods for determination of elastic properties for alpine skis Alpine skis and bindings Binding mounting area Requirements and test methods (first revision) Specification for Adjustable crampons for mountaineering (first revision) Specification for Ice hammers for mountaineering (first revision) Specification for Ascenders for mountaineering Specification for Descenders (type letter E) for mountaineering (first revision) Specification for Binding screws for alpine skis Part 1 General requirements Specification for Binding screws for alpine skis Part 2 Test methods Specification for Ice daggers for mountaineering Specification for Expansion bolts for mountaineering Specification for Rope ladders for mountaineering Specification for Snow dead-boy and deadman for mountaineering
REAFFIRM NO. OF AMEND MENT May 2006
14.
IS 9331:1979
Sep 2006
15.
IS 9397:2001 /ISO 8364:1991
June 2006
16.
IS 9802:1987
Sep 2006
17.
IS 9847:1987
Sep 2006
18.
IS 10023:1981
Sep 2006
19.
IS 10220:1987
Sep 2006
20.
IS 11042 (Pt 1): 1984
Feb 2006
21.
IS 11042 (Pt 2): 1987
Sep 2006
22.
IS 11072:1984
Feb 2006
23.
IS 11073:1984
Feb 2006
24.
IS 11074:1984
Feb 2006
25.
IS 11138:1984
Feb 2006
Method for determination of deformation load Feb 2006 and breaking load on alpine skis *INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS 132
26.
IS 11144:1984
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM NO. OF AMEND MENT Feb 2006 Sep 2006
27. 28.
IS 11207:1983 IS 11616:1986
Specification for Helmets for mountaineers Specification for Avalanche rods for mountaineering Specification for Crampons for mountaineering non-adjustable Ski-poles for alpine skiing - Safety requirements and test methods (first revision) Alpine skis Guidelines for conducting slope performance tests Snowboard-boots Interface with ski-binding
29.
IS 11854:1986
Sep 2006
30.
IS 12259:2001 /ISO 7331:1990 IS 14926:2001
Sep 2006
31.
Sep 2006
32.
IS 15841:2009 /ISO 11634:1996 IS 15842:2009 /ISO 14573:2002 IS 15843(Part 1):2009 /ISO 10958-1:1998
33.
Snowboard strap bindings for soft boots Requirements and test method Snowboard-Binding mounting area Part 1: Requirements and test methods for snowboards without inserts
34.
DRAFT STANDARDS UNDER PRINT Doc: PGD 27(1055) Snowboards- Binding mounting area--Part 2 : Requirements and test methods for snowboards with inserts Snowboard plate-bindings without a release mechanism Requirements and test methods
Doc: PGD 27(1058)
DRAFT STANDARDS COMPLETED WIDE CIRCULATION Doc: PGD 27(1053) Alpine ski-boots Requirements and test methods
PGD 28
ARMS AND AMMUNITION FOR CIVILIAN USE SECTIONAL COMMITTEE
SCOPE: Preparation of standards for fire arms and ammunition for civilian use besides sporting arms and ammunition. CORRESPONDING ISO COMMITTEE(S): NIL SL. NO. IS NO./DOC NO. TITLE REAFFIRM NO. OF AMEND MENTS 1
Specification for Breech loading shot guns, single and double barrel Specification for Muzzle loading shot guns, single and double barrel Specification for Cartridges for shot guns Part 1 General requirements Specification for Cartridges for shot guns Part 2 Blank cartridges Specification for Cartridges for shot guns Part 3 Case empty Specification for Cartridges for shot guns Part 4 Cap filled Specification for Cartridges for shot guns Part 5 Anvil Specification for Cartridges for shot guns Part 6 Propellant Specification for Cartridges for shot guns Part 7 Discs Specification for Cartridges for shot guns Part 8 Air cushion
Dec 2008
2.
IS 10491:1983
Dec 2008
3.
IS 10994(Part 1):1984
May 2010
4.
IS 10994(Part 2):1984
May 2010
5.
IS 10994(Part 3):1984
May 2010
6.
IS 10994(Part 4):1985
May 2010
7.
IS 10994(Part 5):1985
May 2010
8.
IS 10994(Part 6):1985
May 2010
9.
IS 10994(Part 7):1984
May 2010
10.
IS 10994(Part 8):1984
May 2010
Specification for Cartridges for shot guns May 2010 Part 9 Lead shots *INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS 134
11.
IS 10994(Part 9):1984
SL. NO.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENT
12.
IS 12497(Part 1):1988
Specification for Plastic cartridges for shot guns Part 1 General requirements Specification for Plastic cartridges for shot guns Part 3 Plastic body tube Specification for Plastic cartridges for shot guns Part 4 Plastic base wad Specification for Plastic cartridges for shot guns Part 5 Plastic power piston Arms and ammunition Rifle Air rifle spring operated Specification Arms and ammunition 4.5 mm (.177) air rifle and air pistol pellets Part 1 General purpose Arms and ammunition 5.5 mm (.22) air rifle and air pistol pellets Part 1 General purpose Gas operated rifle (for shooting pellets) Specification Arms and ammunition Rifle 5.5 mm (0.22), Bolt operated Specification
Dec 2008
13.
IS 12497(Part 3):1988
Dec 2008
14.
IS 12497(Part 4):1988
Dec 2008
15.
IS 12497(Part 5):1988
Dec 2008
16.
IS 13136:1991
Aug 2006
17.
IS 13540(Part 1):1992
Dec 2008
18.
IS 13541(Part 1):1993
Dec 2008
19.
IS 14391:1997
Sep 2007
20.
IS 14422:1997
Sep 2007
DRAFT STANDARDS UNDER WIDE CIRCULATION Doc: PGD28(1142)W Amendment No 2 to IS 10490 : 1983
Doc : PGD 28 (1143)W Amendment No 2 to IS 10491 : 1983 . Doc : PGD 28 (1144)W Amendment No 2 to IS 13136 : 1991
135
PGD 31 BOLTS, NUTS AND FASTENERS ACCESSORIES SECTIONAL COMMITTEE SCOPE: a) Formulation of standards on terminology for common features of fasten nomenclature, sizes, dimensions, mechanical properties and surface conditions of threaded fasteners and their accessories; all types of fasteners including rivets, pins, nails, clamps, washers, retaining rings and various other types of fasteners. b) Co-ordination of work with: i) ISO/TC 2/SC 7 Fasteners ii) ISO/TC 2/SC 10 Product standards for fasteners CORRESPONDING ISO COMMITTEE(S): ISO/TC 2 Fasteners SL. NO. IS NO./DOC NO. TITLE REAFFIRM NO. OF AMEND MENT
Specification for gate and shutter hooks Dec 2011 and eyes (first revision) Technical supply conditions for wood Oct 2010 screws (fourth revision) Specification for split pins (third revision) Dec 2011
2.
IS 451:1999
3.
IS 549:2005 /ISO 1234:1997 IS 723:1972
4.
Steel countersunk head wire nails (second Dec 2011 revision) Mild steel and brass cup, ruler and square Oct 2010 hooks and screw eyes (first revision) Specification (revised) for copper wire nails Dec 2011
5.
IS 724:1964
6.
IS 725:1961
7.
IS 730:1978
Specification for hook bolts for corrugated Oct 2010 sheet roofing (second revision) Specification for tinmens rivets Dec 2011
8. 9.
IS 866:1957 IS 1120:1975
Specification for coach screws (first Dec 2011 revision)
SL. NO
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
10.
IS 1363(Pt 1): 2002 /ISO 4016:1999
Hexagon head bolts, screws and nuts of Dec 2007 product grade C Part 1: Hexagon head bolts (Size ranges M 5 to M 64) (fourth revision) Hexagon head bolts, screws and nuts of Dec 2007 product grade C Part 2: Hexagon head screws (Size ranges M 5 to M 64) [fourth revision] Hexagon head bolts, screws and nuts of Dec 2007 product grade C Part 3: Hexagon nuts (Size ranges M 5 to M 64) [fourth revision] Hexagon head bolts, screws and nuts of Nov 2007 product grades A and B Part 1: Hexagon head bolts (Size range M 1.6 to M 64) [fourth revision] Hexagon head bolts, screws and nuts of Dec 2007 product grades A and B Part 2: Hexagon head screws (Size range M 1.6 to M 64) [fourth revision] Hexagon head bolts, screws and nuts of Dec 2007 product grades A and B Part 3: Hexagon nuts, Style 1 (Size range M 1.6 to M 64) [fourth revision] Hexagon head bolts, screws and nuts of Mar 2008 product grades A and B Part 4: Hexagon thin nuts (chamfered) (Size range M 1.6 to M 64) [fourth revision] Hexagon head bolts, screws and nuts of Dec 2007 product grades A and B Part 5: Hexagon thin nuts - Product grade B (unchamfered) (Size range M 1.6 to M 10) [fourth revision]
11.
IS 1363(Pt 2): 2002 /ISO 4018:1999
12.
IS 1363(Pt 3): 2002 /ISO 4034:1999
13.
IS 1364(Pt 1): 2002 /ISO 4014:1999
14.
IS 1364(Pt 2): 2002 /ISO 4017:1999
15.
IS 1364(Pt 3): 2002 /ISO 4032:1999
16.
IS 1364(Pt 4): 2003 /ISO 4035:1999
17.
IS 1364(Pt 5): 2002 /ISO 4036:1999
SL. NO
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
18.
IS 1364(Pt 6): 2002 /ISO 4033:1999
Hexagon head bolts, screws and nuts of Nov 2007 product grades A and B Part 6: Hexagon nuts, style 2, product grades A and B (supersede IS/ISO 4033:1979) Slotted Countersunk Flat Head Screws Dec 2011 (Common Head Style) Product Grade A (fourth revision) Slotted cheese head screws Product Oct 2007 grade A (third revision) Technical supply conditions for threaded Dec 2007 steel fasteners Part 1: General requirements for bolts, screws and studs (third revision) Technical supply conditions for threaded Dec 2007 steel fasteners Part 2: Tolerances for fasteners Bolts, screws, studs and nuts Product grades A, B and C (third revision) Technical supply conditions for threaded Dec 2007 steel fasteners Part 3: Mechanical properties of fasteners made of carbon steel and alloy steel Bolts, screws and studs [fourth revision] Technical supply conditions for threaded Nov 2007 steel fasteners Part 5: Mechanical properties of fasteners made of carbon steel and alloy steel - Set screws and similar threaded fasteners not under tensile stresses (third revision) Technical supply conditions for threaded Oct 2010 steel fasteners Part 6: Mechanical properties and test methods for nuts with specified proof loads (third revision) 1 1
19.
IS 1365:2005 /ISO 2009:1994
20.
IS 1366: 2002 /ISO 1207: 1992 * IS 1367(Pt 1): 2002 /ISO 8992:1986
21.
22.
IS 1367(Pt 2): 2002 /ISO 4759-1:2000
23.
IS 1367(Pt 3): 2002 /ISO 898-1:1999
24.
IS 1367(Pt 5): 2002 /ISO 898-5:1998
25.
IS 1367(Pt 6): 1994 /ISO 898-2:1992
SL. NO 26.
IS NO./DOC NO.
TITLE
REAFFIRM
IS 1367(Pt 7): 1980
Technical supply conditions for threaded Feb 2008 steel fasteners Part 7: Mechanical properties and test methods for nuts without specified proof loads (second revision) Technical supply conditions for threaded Dec 2007 steel fasteners Part 8: Prevailing torque type steel hexagon nuts - Mechanical and performance properties for (third revision) Technical supply conditions for threaded Dec 2008 steel fasteners Part 9: Surface discontinuities Section 1: Bolts, screws and studs for general applications (third revision) Technical supply conditions for threaded Dec 2008 steel fasteners Part 9: Surface discontinuities Section 2: Bolts, screws and studs for special applications (third revision) Technical supply conditions for threaded Dec 2007 steel fasteners Part 10: Surface discontinuities - Nuts (third revision) Technical supply conditions for threaded Dec 2007 steel fasteners Part 11: Electroplated coatings (third revision) Technical supply conditions for threaded Feb 2008 steel fasteners Part 12: Phosphate coatings on threaded fasteners (second revision) Technical supply conditions for threaded Dec 2011 steel fasteners Part 13: Hot-dip galvanized coatings on threaded fasteners (second revision)
27.
* IS 1367(Pt 8): 2002 /ISO 2320: 1997
28.
IS 1367(Pt 9/Sec 1): 1993 /ISO 6157-1:1988
29.
IS 1367(Pt 9/Sec 2): 1993 /ISO 6157-3:1988
30.
IS 1367(Pt 10):2002 /ISO 6157-2:1995
31.
IS 1367(Pt 11) :2002 /ISO 4042:1999
32.
IS 1367(Pt 12): 1981
33.
* IS 1367(Pt 13): 1983
SL. NO
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
34.
IS 1367(Pt 14/Sec 1): 2002 /ISO 3506 1: 1997
Technical supply conditions for threaded Nov 2007 steel fasteners Part 14: Mechanical properties of corrosion resistance stainless steel fasteners: Section 1 Bolts, screws and studs (third revision) Technical supply conditions for threaded Dec 2007 steel fasteners Part 14: Mechanical properties of corrosion resistance stainless steel fasteners: Section 2 Nuts (third revision) Technical supply conditions for threaded Dec 2007 steel fasteners Part 14: Mechanical properties of corrosion resistance stainless steel fasteners: Section 3 Set screws and similar fasteners not under tensile stress (third revision) Technical supply conditions for threaded Nov 2007 steel fasteners Part 16: Designation system fasteners (third revision) Technical supply conditions for threaded steel fasteners Part 17 Inspections, sampling and acceptance procedure (fourth revision) Industrial fasteners Threaded steel fasteners Technical supply conditions Mechanical properties Part 18: Packaging (third revision) Dec 2010
35.
IS 1367(Pt 14/Sec 2): 2002 /ISO 3506 2:1997
36.
IS 1367(Pt 14 /Sec 3): 2002 /ISO 3506 3:1997
37.
IS 1367(Pt 16): 2002 /ISO 8991:1986
38.
IS 1367(Pt 17):2005 /ISO 3269:2000
39.
IS 1367(Pt 18): 1996
Dec 2011
40.
IS 1367(Pt 19): 1996 /ISO 3800:1993
Industrial fasteners Threaded steel May 2007 fasteners Technical supply conditions Mechanical properties Part 19: Axial fatigue testing of bolts, screws and studs
SL. NO
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
41.
IS 1367(Pt 20): 1996 /ISO 898-7:1992
Industrial fasteners Threaded steel Dec 2011 fasteners Technical supply conditions Mechanical properties Part 20 Torsional test and minimum torques for bolts and screws with nominal diameters 1mm to 10mm Fasteners - Ends of parts with external Jan 2008 ISO metric threads (fourth revision) Fasteners Thread runout and undercuts Dec 2008 Part 1 Dimensions for screw thread runout for external ISO metric threads (third revision) Fasteners Thread runout and undercuts Dec 2008 Part 2: Dimensions for screw thread undercuts for external ISO metric threads (third revision) Fasteners Thread runout and undercuts Oct 2010 Part 3: Dimensions for screw thread runout and undercut for internal threads (third revision) Dimensions for clearance holes for bolts Feb 2008 and screws (third revision) Specification for studs (second revision) Specification for boiler rivets (12 to 48 mm diameter) Dec 2011 Dec 2011 1
42.
IS 1368:2003 /ISO 4753:1999 IS 1369(Pt 1):1993 /ISO 3508:1976
43.
44.
IS 1369(Pt 2): 1993 /ISO 4755:1983
45.
IS 1369(Pt 3): 1995
46.
IS 1821:1987 /ISO 273:1979 * IS 1862:1975 IS 1928:1961
47. 48.
49.
IS 1929:1982
Specification for hot forged steel rivets for Dec 2011 hot closing (12 to 36mm diameter) (first revision) Specification for plain washers (first revision) Dec 2011
50.
IS 2016:1967
SL. NO
IS NO./DOC NO.
TITLE
REAFFIRM
51.
IS 2155:1982
Specification for cold forged solid steel rivets for hot closing (6 to 16mm diameter) (first revision) Specification for slotted and castle nuts (first revision) Hexagon socket head cap screws (fifth revision) Parallel pins, of unhardened steel and austenitic stainless steel (third revision)
Dec 2011
52.
* IS 2232:1967
Dec 2011
53.
IS 2269:2005 /ISO 4762:1997 IS 2393:2010 /ISO 2338:1997
54.
Dec 2011
55.
IS 2585:2006
Square head bolts, screws and square nuts Mar 2006 of Product Grade C Specification (second revision) Specification for coach bolts (first revision) Specification for wing nuts (first revision) Specification for flat split cotters (first revision) Cap nuts Specification (second revision) Non-ferrous rivets Specification (first revision) Feb 2008 3
56.
IS 2609:1972
57. 58.
IS 2636:1972 IS 2638:1974
Dec 2011 Dec 2011
59. 60.
IS 2687:1991 IS 2907:1998
Dec 2011 Oct 2008
61
IS 2998:1982
Cold forged steel rivets for cold closing (1 Feb 2008 to 16mm diameter) (first revision) Fasteners Single coil rectangular section spring lock washers Specification (second revision) Oct 2010
62.
IS 3063:1994
SL. NO
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
63
IS 3460:1991
Knurled nuts Specification (second revision) Pipe nuts Specification (second revision)
Dec 2011
64
IS 3468:1991
Dec 2011
65
IS 3524(Pt 1):1982
Specification for threaded taper pins Dec 2011 Part 1: With internal threads (first revision) Specification for threaded taper pins Part 2: With external threads (first revision) Specification for hexagon fit bolts (first revision) Thumb screws Specification (second revision) Specification for wing screws High strength structural bolts (second revision) Specification for bifurcated rivets for general purposes Dec 2011
66
IS 3524(Pt 2): 1982
67
* IS 3640:1982
Dec 2011
68
IS 3726:2003
Dec 2008
69 70
IS 3727:1966 IS 3757:1985 |ISO 7412:1984 IS 3974:1967
Dec 2011 Feb 2008 2
71
Dec 2011
72
IS 4040:1998
Fasteners Solid-drilled tubular and semi- Oct 2008 tubular rivets Specification (first revision) General purpose bolts and screws metric series Radii under the head (second revision) Dec 2010
73
IS 4172:2005 /ISO 885:2000
74
IS 4206:1987 /ISO 888:1976
Dimensions for nominal lengths and Feb 2008 thread lengths for bolts, screws and studs (first revision)
SL. NO
IS NO./DOC NO.
TITLE
REAFFIRM
75 76 77
IS 4499:1968 IS 4732:1968 IS 4762: 2002
Dimensions for depths of holes for studs Specification for rivets for shipbuilding
Dec 2011 Dec 2011
Fasteners Worm drive hose clamps for July 2007 general purpose (second revision) Specification for thin slotted and castle nuts (dia range 6 to 52mm) General requirements for plain washers and lock washers (first revision) Dec 2011 1
78
IS 5368:1969
79
IS 5369:1975
Dec 2011
80
IS 5370:1969
Specification for plain washers with Dec 2011 outside diameter more than three times the inside diameter Specification for multi tooth lock washers (first revision) Specification for taper washers for channels (ISMC) (first revision) Specification for square washers for wood fastenings Specification for taper washers for Ibeams (ISMB) (first revision) Dec 2011
81
IS 5371:1982
82
IS 5372:1975
Dec 2011
83
IS 5373:1969
Dec 2011
84
IS 5374:1975
Dec 2011
85
IS 5554:1991
Lock washers with lug Specification Dec 2011 (first revision) Serrated lock washers Specification Dec 2011 (first revision) Foundation bolts Specification (first revision) Dec 2008
86
IS 5556:1991
87
IS 5624:1993
88
IS 5957:2003 /ISO 1478:1999
Screw threads for thread forming tapping Mar 2008 screws Dimensions (second revision)
SL. NO
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
89
IS 6094(Part 1):2006 /ISO 4026:2003 IS 6094(Part 2):2006 /ISO 4027:2003 IS 6094(Part 3):2006 /ISO 4028:2003 IS 6094(Part 4):2006 /ISO 4029:2003 IS 6101:2005 /ISO 1580:1994 IS 6113:1970
Hexagon socket set screws Part 1 With Flat Point (Third revision) Hexagon socket set screws Part 2 With Cone Point (Third revision) Hexagon socket set screws Part 3 With Dog Point (Third revision) Hexagon socket set screws Part 3 With Cup Point (Third revision) Slotted pan head screws - Product Grade A (first revision) Specification for aluminum fasteners for building purposes Specification for heavy washers for steel structures High strength structural nuts Specification (second revision) Oct 2010
90
91
92
93
94
Dec 2011
95
IS 6610:1972
Dec 2011
96
IS 6623:2004
Oct 2010
97
IS 6639:2005
Hexagon Head Bolts for General Steel Dec 2010 Structures Specification (first revision) Specification for hardened and tempered Oct 2010 washers for high strength structural bolts and nuts (first revision) Taper pins unhardened (second revision) Dec 2010 1
98
IS 6649:1985 |ISO 7415:1984
99
IS 6688:2005 /ISO 2339:1986 IS 6689:2003 /ISO 8734:1997
100
Parallel pins of hardened steel and Jan 2008 martensitic stainless steel (Dowel pins) (first revision) Specification for felt nails Dec 2011
101
IS 6730:1972
102 IS 6732:1972 Specification for double point nails Dec 2011 *INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS 145
SL. NO
IS NO./DOC NO.
TITLE
REAFFIRM
103 104 105
IS 6733:1972 IS 6734:1972 IS 6735:1994
Specification for wall and roofing nails Specification for cut lath and lath nails
Dec 2011 Dec 2011
Fasteners Spring lock washers for Oct 2010 screws with cylindrical head Specification (first revision) Specification for slotted raised countersunk head wood screws Specification for panel pins and lost head nails Specification for slotted round head wood screws Double coil helical spring washers (first revision) Specification for slotted countersunk head wood screws Oct 2010
106
IS 6736:1972
107
IS 6738:1972
Dec 2011
108
IS 6739:1972
Oct 2010
109
IS 6755:1980
Dec 2011
110
IS 6760:1972
Oct 2010
111
* IS 6761:1994
Fasteners Countersunk head screws with Oct 2010 hexagon socket Specification (first revision) Methods for sampling non-threaded fasteners Clevis pins without head (first revision) Dec 2011 1
112
* IS 6821:1973
113
IS 6862:2005 /ISO 2340:1986 IS 6863:2005 /ISO 2341:1986 IS 7002:2005 /ISO 7040:1997
Dec 2010
114
Clevis pins with head (second revision)
Oct 2010
115
Prevailing torque type hexagon nuts (with Oct 2010 non-metallic inserts) style 1 Property classes 5, 8 and 10 Specification (second revision)
SL. NO
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
116.
IS 7169:1989 /ISO 1483:1983
Slotted raised countersunk (oval) head Oct 2010 tapping screws (common head style) (first revision) Slotted countersunk (flat) head tapping Oct 2010 screws (common head style) (first revision) Slotted pan head tapping screws (first Oct 2010 revision) Heat treated tapping screws Mechanical Dec 2007 properties (third revision) Grooved pins Full length taper grooved (first revision) Grooved pins One-third length centre grooved (second revision) Grooved pins Full length parallel grooved, with pilot (second revision) Oct 2010
117.
IS 7170:1989 /ISO 1482:1983
118.
IS 7173:1989 /ISO 1481:1983 IS 7178:2002 /ISO 2702:1992 IS 7368:2005 |ISO 8744:1997 IS 7383:2005 /ISO 8742:1997 IS 7384:2005 /ISO 8739:1986 IS 7385:2005 /ISO 8745:1986 IS 7386:1990 /ISO 8741:1986 IS 7478:2011 /ISO 4757:1983 IS 7483:2005 /ISO 7045:1994
119.
120.
121.
Oct 2010
122.
Oct 2010
123.
Grooved pins Half length taper grooved Oct 2010 (second revision) Grooved pins Half length reverse taper grooved (first revision) Cross recesses for screws (second revision) Pan head screws with type H or Z cross Oct 2010 recess Product grade A (second revision) Dec 2011 1
124.
125.
126.
147
SL. NO
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
127.
IS 7485 (Part 1):2005 /ISO 7046-1 :1994
Countersunk flat head screws (Common Head style) with type H or type Z cross recess Product Grade A Part 1 Steel of property class 4.8 (second revision) Countersunk flat head screws (Common head style) with type H or type Z cross recess _ Product Grade A Part 2 Steel of property class 8.8, stainless steel and non ferrous metals (second revision)
Oct 2010
128.
IS 7485 (Part 2):2005 /ISO 7046-2 : 1990
Oct 2010
129.
IS 7486:2005 /ISO 7047:1994
Countersunk raised head screws (Common Oct 2010 Head style) with Type H or Type Z Cross recess Product Grade A (second revision) Specification for Hammer drive screws Domed cap nuts Specification (first revision) Thread cutting tapping screw Screw threads and ends Dimensions (first revision) Dec 2011 Dec 2011 1
130. 131.
IS 7519:1974 IS 7790:1991
132.
IS 7800:1990
Dec 2011
133.
IS 8033:1976
Specification for washers with square hole Dec 2011 for wood fastenings Specification for tab washers Dec 2011
134. 135.
IS 8068:1976 IS 8070:1991
Screws Slotted capstan (tommy bolts) Oct 2010 Specification (first revision) Dimensions of pipe thread runouts and undercuts Specification for spiral pins (heavy duty type) Dec 2011
136.
* IS 8217:1976
137.
IS 8351:1977
Dec 2011
Specification for flat countersunk square Dec 2011 neck bolts *INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS 148
138.
IS 8352:1977
SL. NO 139. 140.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
IS 8353:1977 IS 8379:1977
Specification for flat countersunk nib bolts Dec 2011 Specification for spiral pins (medium duty type) Dec 2011
141.
* IS 8412:1977
Specification for slotted countersunk head Dec 2011 bolts for steel structures Bolts, screws, nuts and accessories Feb 2008 Terminology and nomenclature (first revision) Fasteners Bolts, screws, studs and nuts Feb 2008 Symbols and designation of dimensions (first revision) Specification for fish bolts (cup oval neck bolts) for collieries Specification for fish bolt with square head for collieries Specification for slotted mushroom head roofing bolts Hexagon weld nuts Specification (first revision) Specification for washers for corrugated sheet roofing Countersunk slotted raised head screws (common head style) Product Grade A (first revision) Dec 2011
142.
IS 8535:1987 /ISO 1891:1979
143.
IS 8536:1987 /ISO 225:1983
144.
IS 8721:1978
145.
IS 8722:1978
Dec 2011
146.
IS 8822:1978
Dec 2011
147.
IS 8856:1991
Feb 2008
148.
IS 8869:1978
Dec 2011
149.
IS 8911:2005 /ISO 2010:1994
Oct 2010
150.
IS 9519 :2005 /ISO 272:1982 * IS 9549:1980
Fasteners Hexagon products Width Oct 2010 across flats (first revision) Dimensions for split pin holes, wire holes Feb 2008 and head slots for bolts
151.
149
SL. NO 152. 153.
IS NO./DOC NO.
TITLE
REAFFIRM
IS 10102:1982 IS 10238:2001
Technical supply conditions for rivets Fasteners Threaded steel fasteners step bolts for steel structures - Specification Parallel pins with internal thread Part 1 Unhardened steel and austenitic stainless steel (first revision) Parallel pins with internal thread Part 2 Hardened steel and martenistic stainless steel (first revision) Head configuration and countersunk head screws gauging
Oct 2010 Dec 2011
154.
IS 10248 (Part 1): 2011/ ISO 8733: 1997
155.
IS 10248 (Part 2): 2011/ ISO 8735: 1997
156.
IS 11362:1985 /ISO 7721:1983 IS 12427:2001
of Dec 2011
157.
158.
IS 12952:2005 /ISO 8740:1997 IS 12982:1991 /ISO 8749:1986 IS 13096:2000 /ISO 898-6:1994
Fasteners Threaded steel fasteners Dec 2011 Hexagon head transmission tower bolts Specification (first revision) Grooved pins Full length parallel Oct 2010 grooved with chamfer (first revision) Pins and grooved pins Shear test Dec 2011
159.
160.
Fasteners Hexagon nuts with specified Oct 2010 proof load values Fine pitch threads Mechanical properties (first revision) Hexagon nuts, style 1 with metric fine Nov 2007 pitch threads Product grades A and B (first revision) Hexagon nuts, style 2 with metric fine Nov 2007 pitch threads Product grades A and B (first revision) Hexagon thin nuts (chamfered) with Nov 2007 metric fine pitch threads Product grades A and B (first revision) Hexagon head screws with metric fine Dec 2007 pitch threads Product grades A and B (first revision) 150
161.
IS 13722:2002 /ISO 8673:1999
162.
IS 13723:2002 /ISO 8674:1999
163.
IS 13724:2002 /ISO 8675:1999
164.
IS 13725:2002 /ISO 8676:1999
SL. NO 165.
IS NO./DOC NO.
TITLE
REAFFIRM
NO. OF AMEND MENTS
IS 13726:2002 /ISO 8765:1999
Hexagon head bolts with metric fine pitch Dec 2007 threads Product grades A and B (first revision) Industrial fasteners Hexagon nuts of Dec 2011 product grade C Hot-dip galvanized Specification (Size range M 12 to M 36) Fasteners Hexagon head bolts of product Dec 2011 grade B Reduced shank (Shank diameter Pitch diameter) - Specification Tolerances for fasteners Plain washers Feb 2008 for bolts, screws and nuts Product grades A and C Cone proof load test on nuts Oct 2010
166.
IS 14394:1996
167.
IS 14894:2001 |ISO 4015:1979
168.
IS 15274:2003 /ISO 4759-3:2000
169.
IS 15568:2005 /ISO 10485: 1991 IS 15569:2005 /ISO 10484: 1997 IS 15581 :2005 /ISO 4161 : 1999 IS 15582 :2005 /ISO 4162 :1990 IS 15628 : 2005 /ISO 4766 : 1983 IS 15629 : 2005 /ISO 7434 : 1983 IS 15630 : 2005 /ISO 7435 : 1983 IS 15631 : 2005 /ISO 7436 : 1983
170.
Widening test on nuts
Oct 2010
171.
Hexagon Nuts with Flange Coarse Thread Oct 2010
172.
Hexagon Flange Bolts Small Series
Oct 2010
173.
Slotted set screws with flat point
Oct 2010
174.
Slotted screws with cone point
Oct 2010
175.
Slotted set screws with long dog point
Oct 2010
176.
Slotted set screws with cup point
Oct 2010
177.
IS 15705:2006 Gauging of hexagon socket / ISO 23429:2004 *INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS 151
PGD 32 CUTTING TOOLS SECTIONAL COMMITTEE SCOPE: a) Standardization in the field of twist drills, reamers, countersink and counterbore, drills, screwing taps, dies and other threading tools. b) Liaison with i) ISO/TC 29/SC 2 Drills, reamers, milling cutters and milling machines accessories as applicable to PGD 10 CORRESPONDING ISO COMMITTEES: ISO/TC 29/SC 2 Drills, Reamers, Milling Cutters and Milling Machines Accessories SCOPE: a) Standardization in the field of milling cutters, milling machine arbors and accessories saw and saw blades, gear cutting tools, broaches and their holding devices b) Liaison with: i) ISO/TC 29/SC 2 Drills, reamers, milling cutters and milling machines accessories as applicable to PGD 11 SCOPE: a) Standardization in the field of single point tools, carbide tips, indexable (Throwaway) inserts, tool shanks, tool blanks and hard metal burrs. b) Liaison with: i) ISO/TC29/SC 9 Tools with cutting edge made of hand cutting materials SL. NO. IS NO./DOC NO. TITLE REAFFIRM NO. OF AMEND MENTS
STANDARDS PUBLISHED 1. IS 1715:2002 Dimensions for self holding taper (third Oct 2008 revision) Technical supply conditions for milling Oct 2008 cutters (second revision) Dimensions for shank diameters and Oct 2008 driving squares for rotating tools Shank sections for single point turning Jan 2010 and planning tools (second revision) Dimensions for self-release 7/24 tapers for Mar 2011 milling arbors and tool shanks (first revision) Classification and application of hard Feb 2012 cutting materials for material removal with defined cutting edges Designation of the main groups and groups of 152 2 2
2.
IS 1830:1982 |ISO 3855:1977 IS 1850:1961
3.
4.
IS 1983:2004 /ISO 241:1994 IS 2340:1972
5.
6.
IS 2428:2007 /ISO 513:2004
application (second revision) 7. 8. IS 2594:2003 IS 2668:2004 /ISO 3337:2000 Hacksaw blades (second revision) Oct 2008
T-slot cutters with cylindrical shanks and Jan 2010 with Morse taper shanks having tapped hole (second revision) Woodruff key slot milling cutters with Oct 2008 parallel shank (first revision) Thread milling cutters Shell type - Oct 2008 Specification (first revision) Specification cutters for Interlocked milling Oct 2008 1
9.
IS 2669:1971
10.
IS 2670:1991
11.
IS 2671:1964
12.
IS 3019:1973
Specification for single point turning tools Oct 2008 (first revision) Die stock for circular screwing dies- Oct 2008 Specification (second revision) Indexable hardmetal (Carbide) inserts Mar 2011 with rounded corners, without fixing hole Dimensions (second revision) Specification for tap wrenches, adjustable Oct 2008 (first revision) Specification for Extension bars Oct 2008
13.
IS 3239:1994
14.
IS 4022:1996 /ISO 883:1985
15.
IS 4914:1983
16. 17. * *
IS 4921:1968 IS 5030(Part 1): 1982 |ISO 4875-1:1978
Specification for Metal cutting band saw Oct 2008 blades Part 1: Definition and terminology (first revision) Specification for Metal cutting band saw Oct 2008 blades Part 2: Tolerance (first revision) Specification for Metal cutting band saw Mar 2011 blades Part 3 Dimensions and other requirements (second revision)
18.
* *
IS 5030(Part 2): 1982 |ISO 4875-2:1978 IS 5030(Part 3): 2005
19.
20.
IS 5031:1992
Saws Metal slitting Specification Oct 2008 (second revision)
153
21.
IS 5099:2003
Technical supply conditions for drills (second revision)
twist Oct 2008
22.
IS 5100:1969
Specification for Twist drills, parallel Oct 2008 shanks, stub series for right hand cutting Twist drills, parallel shank, jobber series Oct 2008 Specification (first revision) Specification for Twist drills, parallel Oct 2008 shank, long series Specification for Twist drills, morse taper Oct 2008 shank Specification for Twist drills, oversize Oct 2008 morse taper shank Specification for Twist drills, taper square Oct 2008 shanks for ratchet braces Specification for Twist drills, taper square Oct 2008 shanks for carpenters braces Dimensions for driving tenon Oct 2008
23.
IS 5101:1991
24.
IS 5102:1969 |ISO 494:1975 IS 5103:1969
25.
26.
IS 5104:1969
27.
IS 5105:1969
28.
IS 5106:1969
29. 30.
IS 5360:1969 IS 5362:1969
Specification for Twist drills, parallel Oct 2008 shanks, stub series, left-hand cutting for automatics Specification revision) for Micro drills (first Oct 2008
31.
IS 5363:1983
32.
IS 5364:1969
Specification for Twist drills for taper pin Oct 2008 holes with taper 1:50 Core drills, parallel shanks Specification Oct 2008 (second revision) Specification for Core drills, morse taper Oct 2008 shanks (first revision) High speed steel reamers Technical Jan 2010 supply conditions (second revision) Specification for Parallel hand reamers Oct 2008 with parallel shanks (first revision) 154 2
33.
IS 5365:1991 |ISO 7089:1981 IS 5366:1978 |ISO 235-2:1975 IS 5443:1994
34.
35.
36.
IS 5444:1978
37.
IS 5445:1978
Specification for Long fluted machine Oct 2008 reamers with morse taper shank (first revision) Specification for Machine chucking Oct 2008 reamers with parallel shanks (first revision) Specification for Machine chucking Oct 2008 reamers with morse taper shanks (first revision) Dimensions for tenons and cross slots for Oct 2008 tools with bore taper 1:30 (first revision) Specification for Countersinks 90 deg Oct 2008 with parallel shanks and solid pilots (first revision) Specification for Rotary form relieved Oct 2008 gear cutters for spur and helical gears Specification for Flat thread rolling dies Oct 2008
38.
IS 5446:1978
39.
IS 5447:1978
40.
IS 5568:1978
41.
IS 5693:1988
42.
IS 5698:1970
43. 44.
IS 5702:1970 IS 5703:1988
Specification for Countersinks 90 deg Oct 2008 with morse taper shanks and detachable pilot (first revision) Specification for Counterbores with Oct 2008 parallel shanks and solid pilots (first revision) Specification for Detachable pilots for use Oct 2008 with counterbores and countersink 90 deg (first revision) Specification for Counterbores with morse Oct 2008 taper shanks and detachable pilots (first revision) Specification for Taper pin hand reamers Jan 2010 (first revision) Specification for Socket reamers with Oct 2008 parallel shanks Specification for Socket reamers with Oct 2008 155 1 2
45.
IS 5704:1988
46.
IS 5705:1988
47.
IS 5710:1988
48.
IS 5881:1984
49.
IS 5882:1970
50.
IS 5907:1970
morse taper shanks 51. IS 5918:1984 Specification for Taper pin, machine Jan 2010 reamers with morse taper shank (first revision) Specification for Machine bridge reamers Oct 2008 (first revision) Specification for Shell reamers Oct 2008 2
52.
IS 5919:1978
53. 54.
IS 5926:1970 IS 5927:1981
Specification for Reduction sleeves 7/24 Oct 2008 taper to morse taper (first revision)
55.
IS 5936:1981
Specification for Arbor with morse taper Oct 2008 shanks for shell tools (first revision) Hole mills revision) Specification (second Oct 2008
56.
IS 5989:1998
57.
IS 6171:1992
Screwing taps Technical conditions (second revision)
supply Oct 2008
58.
IS 6173(Part 1): 1992
Screwing taps Dimensions and Oct 2008 tolerances on threaded portion Part 1: For ISO metric screw threads (Superseding IS 9169:1979) Screwing taps Dimensions and Oct 2008 tolerances on threaded portion Part 2: For pipe threads G, Rp and Rc series Screwing taps Part 1: Hand and short Oct 2008 machine screwing taps for ISO metric screw threads sizes M1 to M2.5 Specification (second revision) Screwing taps Part 2: Hand and short Oct 2008 machine screwing taps for ISO metric screw threads sizes M3 to M10 Specification (second revision) Screwing taps Part 3: Hand and short Oct 2008 machine screwing taps for ISO metric screw threads sizes M3 to M68 with coarse pitches and M3 to M100 with fine 156
59.
IS 6173(Part 2): 1992
60.
IS 6175(Part 1): 1992 |ISO 529:1975
61.
IS 6175(Part 2): 1992 |ISO 529:1975
62.
IS 6175(Part 3): 1992 |ISO 529:1975
pitches Specification (second revision) 63. IS 6175(Part 4): 1991 |ISO 2283:1972 Screwing taps Part 4: Long shanks Oct 2008 machine screw taps for ISO metric screw threads sizes M3 to M24 Specification (Superseding IS 7821:1975) Screwing taps Part 5: Nut screwing taps Oct 2008 for ISO metric screw threads sizes M3 to M68 with coarse pitches Specification (Superseding IS 6174:1971) Screwing taps Part 6: Screwing taps for Oct 2008 pipe threads parallel G series Specification (Superseding IS 6172:1972) Screwing taps Part 7: Screwing taps for Oct 2008 pipe threads parallel Rp series Specification (Superseding IS 6172:1972) Screwing taps Part 8: Screwing taps for Oct 2008 pipe threads parallel Rc series Specification (Superseding IS 7796:1975) Specification for Inverse dove tail and Jan 2010 dove tail milling cutters (second revision) Specification for Shell end single angle Jan 2010 milling cutters (first revision) Specification for Shell end mills (first Oct 2008 revision) Dimensions for interchangeability of Oct 2008 milling cutters and milling arbors with key drive Specification for Side and face milling Oct 2008 cutters (first revision) Specification for Cylindrical cutters (first revision) milling Oct 2008 1 1 2
64.
IS 6175(Part 5): 1991 |ISO2283:1972
65.
IS 6175(Part 6): 1992 |ISO 2284:1987
66.
IS 6175(Part 7): 1992 |ISO 2284:1987
67.
IS 6175(Part 8): 1992 |ISO 2284:1987
68.
IS 6255:1995
69.
IS 6256:1995
70.
IS 6257:1982
71.
IS 6285:1971 |ISO/R 240 : 1969
72.
IS 6308:1982
73.
IS 6309:1982
74.
IS 6310:1971 |ISO/R 240 : 1969
Dimensions for interchangeability of Oct 2008 milling cutters and milling arbors with tenon drive
157
75.
IS 6314:1982
Specification for Single corner rounding Oct 2008 milling cutters (first revision) Specification for Concave milling cutters Oct 2008 (first revision) Specification for Convex milling cutters Oct 2008 (first revision) Specification for Single angle milling Oct 2008 cutters Specification for Double angle milling Oct 2008 cutters Equal angle milling cutters Specification Oct 2008 (first revision) Slot drills with parallel Specification (first revision) End mills with parallel Specification (first revision) shanks Oct 2008
76.
IS 6322:1982
77.
IS 6323:1982
78.
IS 6324:1971
79.
IS 6325:1971
80.
IS 6326:1996
81.
IS 6352:1991
82.
IS 6353:1991
shanks
Oct 2008
83.
IS 6354:1991
End mills with Morse taper shanks Oct 2008 Specification (first revision) Specification for Keyway milling cutters Oct 2008 (first revision) Slot drills with Morse taper shanks Oct 2008 Specification (first revision) Thread milling cutters with parallel Oct 2008 shanks Specification (first revision) Thread milling cutters with Morse taper Oct 2008 shanks Specification (first revision) Dimensions for self-release 7/24 tapers for Oct 2008 spindle noses for milling machines Morse taper extension Specification (first revision) (Superseding IS 2608:1964) sockets Oct 2008 1 1
84.
IS 6355:1982
85.
IS 6388:1991
86.
IS 6550:1992
87.
IS 6551:1992
88.
IS 6681:1972
89.
IS 6682:1991
158
90.
IS 6702:1991
Morse taper reduction Specification (first revision) (Superseding IS 2608:1964)
sleeves
Oct 2008
91.
IS 6708:1977 |ISO 866:1975 IS 6709:1977 |ISO 2540:1972 IS 6710:1977 |ISO 2541:1972 IS 6776:1980
Specification for Centre drills type A (first Oct 2008 revision) Specification for Centre drills type B (first Oct 2008 revision) Specification for Centre drills type R (first Oct 2008 revision) Specification for Knurling wheels (first Oct 2008 revision) Specification for Twist drills for jig Oct 2008 boring machines 1
92.
93.
94.
95.
IS 7766:1975
96.
IS 7772:1975 |ISO 3314:1975 IS 7773:1975 IS 7778(Part 1) :2003
Specification for Shell core drills
Oct 2008
97. 98.
Holding dimensions for broaching tools
Oct 2008
Small tools sampling inspection Oct 2008 procedures Part 1 Twist drills, countersinks and counterbores (first revision) Small tools sampling inspection Oct 2008 procedures Part 2 Reamers (first revision) Small tools sampling inspection Oct 2008 procedures Part 3 Sleeves, sockets and adaptors(first revision) Small tools sampling inspection Oct 2008 procedures Part 4 Screwing taps, dies and knurling tools (first revision) Small tools sampling inspection Oct 2008 procedures Part 5 Milling cutters (first revision) Small tools sampling inspection Oct 2008 procedures Part 6 Milling arbors and 159
99.
IS 7778(Part 2) :2003
100.
IS 7778(Part 3): 2003
101.
IS 7778(Part 4) : 2003
102.
IS 7778(Part 5): 2003
103.
IS 7778(Part 6) : 2003
accessories (first revision) 104. IS 7778(Part 7): 2003 Small tools sampling inspection Oct 2008 procedures Part 7 Gear cutting tools and broaches (first revision) Small tools sampling inspection Oct 2008 procedures Part 8 Saws (first revision) Small tools sampling inspection Oct 2008 procedures Part 9 Single point (HSS and Carbide tips) tools (first revision) Small tools sampling inspection Oct 2008 procedures Part 10 Carbide tips and indexable inserts (first revision) Small tools sampling inspection Oct 2008 procedures Part 11 Hard metal burrs(first revision) Twist drills Extra - long morse taper Jan 2010 shank - Specification (second revision) Twist drills Extra - long parallel shank - Jan 2010 Specification (second revision) Specification for Twist drills, morse taper Oct 2008 shank, long series Specification for Carbide tipped twist Oct 2008 drills, morse taper shanks Specification for Carbide tipped, twist Oct 2008 drills, parallel shank Thread rolling cylindrical Specification (first revision) dies - Oct 2008 1
105.
IS 7778(Part 8): 2003
106.
IS 7778(Part 9): 2003
107.
IS 7778(Part 10): 2003
108.
IS 7778(Part 11): 2003
109.
IS 7822:2005 /ISO 3291:1995 IS 7823:2005 /ISO 3292:1995 IS 8305:1976
110.
111.
112.
IS 8306:1976
113.
IS 8307:1976
114.
IS 8405:2005
115.
IS 8611:1988
Technical supply conditions for milling Oct 2008 arbors and accessories (first revision) Milling arbors with self-release 7/24 taper Oct 2008 - Specification (first revision) Stub milling arbors with self-release 7/24 Oct 2008 taper - Specification (first revision) 160
116.
IS 8614:1993
117.
IS 8615:1993
118.
IS 8616:1993
Stub milling arbors with self-release 7/24 Oct 2008 taper and with key - Specification (first revision) Specification for Spacing collars for Oct 2008 milling arbors Specification for Bearing collars for Oct 2008 milling arbors Clamping nuts for milling arbors - Oct 2008 Specification (first revision) 1
119.
IS 8618:1977 |ISO 839-2: 1977 IS 8619:1977 |ISO 839-2: 1977 IS 8620:1993
120.
121.
122.
IS 8621:1977
Specification for Retaining screws for Oct 2008 milling arbors Cylindrical shanks for milling cutters - Jan 2010 Part 1: Dimensional characteristics of plain cylindrical shanks (first revision) Cylindrical shanks for milling cutters- Jan 2010 Part 2: Dimensional characteristics of flatted cylindrical shanks (first revision) Cylindrical shanks for milling cutters -Part 3: Dimensional characteristics of threaded shanks Technical supply conditions for general Oct 2008 purpose gear hobs Single start solid (monoblock) gear hobs Oct 2008 with tenon drive for axial keyway, 1 to 40 module Normal dimensions (first revision) Tolerances for single start gear hobs Oct 2008
123.
IS 8692 (Part 1): 2004 /ISO 3338-1: 1996 * IS 8692(Part 2): 2004
124.
125.
IS 8692(Part 3): 2007 /ISO 3338-3: 1996
126.
IS 8731:1978
127.
IS 8732:2003 /ISO 2490:1996
128. 129.
IS 8733:1978 IS 8842:1978
Specification for High speed steel butt Oct 2008 welded single point planing tools Dimensions for spindle adjustable adaptors Modular units construction noses for Oct 2008
130.
IS 8918:1978
131.
IS 8919: 2007/ ISO 2905: 1985
for machine Spindle noses
tool Feb 2012 and
161
adjustable adaptors for multi spindle heads (first revision) 132. IS 9322:1980 Technical supply conditions for carbide Oct 2008 tipped milling cutters Carbide tipped end mills with parallel Oct 2008 shanks - Specification (first revision) Carbide tipped end mills with Morse taper Oct 2008 and tapped end shank- Specification (first revision) Carbide tipped slot drills with parallel Oct 2008 shanks - Specification (first revision) Carbide tipped slot milling cutters with Oct 2008 Morse taper and tapped end shanks Specification (first revision) Specification for Carbide tipped core Oct 2008 drills with morse taper shanks Carbide flats, squares and rounds Mar 2011 Dimensions (first revision) Indexable inserts for cutting tools Oct 2008 Designation (second revision) Specification for Band saw blades for Oct 2008 woodworking Specification for Tapered die-sinking Oct 2008 cutter with parallel shanks Dimensions for optional recess on morse Oct 2008 taper shanks for tools System of designation and marking of Oct 2008 single point cutting tools with carbide tips Specification for Chain wheel rotary tooth Oct 2008 form milling cutter Specification for Split taper socket for Oct 2008 tools with parallel shank and driving tenon 162 1 1 2
133.
IS 9323:1991
134.
IS 9324:1991
135.
IS 9325:1996
136.
IS 9326:1996
137.
IS 9771:1981
138.
IS 9775:2000
139.
IS 9897:2001 /ISO 1832:1991 IS 10140:1982
140.
141.
IS 10255:1982
142.
IS 10293:1982
143.
IS 10412:1983
144.
IS 10465:1983
145.
IS 10514:1983
146.
IS 10571:1983
Specification for Split taper sockets for Oct 2008 tools with parallel shank, driving square and driving tenon Specification for Segmental saws for cold Oct 2008 sawing Spline hobs -Straight sided- Specification Oct 2008 (first revision) Specification for taper pin reamers with parallel shanks machine Jan 2010 1 1
147.
IS 10591:1983
148.
IS 10608:1998
149.
IS 10851:1984
150.
IS 10884:1984
Specification for carbide tipped chucking Jan 2010 reamers with parallel shanks Specification for carbide tipped chucking Jan 2010 reamers with morse taper shanks with short cutting edge Terms, definitions and type of twist drills Jan 2010
151.
IS 10885:1984
152. 153.
IS 10915:1984 IS 10923:1994
Carbide tipped and solid carbide reamers Jan 2010 Technical supply conditions (first revision) Recommendations for drills for use prior Jan 2010 to tapping screw threads (Superseding IS 3230 & 5617) Specification for machine jig reamers Jan 2010 morse taper shank (Superseding IS 6091:1971) Specification for Holders for knurling Jan 2010 wheels Specification for Ground high speed steel Oct 2008 tool bits Recommendations for tool shanks for Mar 2011 numerically controlled machine tools (Tool stationary type) Part 1: Cylindrical shanks Recommendations for tool shanks for Mar 2011 numerically controlled machine tools 163 1 2
154.
IS 10952:1984 /ISO 2306:1972
155.
IS 11002:1984
156.
IS 11127:1984
157.
IS 11143:1984
158.
IS 11172 (Part 1) :1985
159.
IS 11172 (Part 2) :1985
(Tool stationary type) Part 2: Prismatic shanks 160. * IS 11173 (Part 1) :1985 Recommendations for tool shanks 7/24 Mar 2011 taper for numerically controlled machine tools with automatic tool changers (Tool rotating type) Part 1: Tool shanks Recommendations for tool shanks 7/24 Mar 2011 taper for numerically controlled machine tools with automatic tool changers (Tool rotating type) Part 2: Retention knobs Stub self-holding tapers Dimensions (first revision) Dimensions for ground carbide rounds Jan 2010 1
161.
IS 11173 (Part 2) :1985
162.
IS 11351: 2005
163. 164.
IS 11441:1985 IS 11522 (Part 1): 1986 /ISO 30021:1982
Jan 2010
Recommendations for basic quantities in Oct 2008 cutting and grinding Part 1: Geometry of the active part of cutting tools, general terms, reference systems, tools and working angles and chip breakers. Indexable Hardmetal (Carbide) Inserts Oct 2008 With Wiper Edges, Without Fixing Hole Dimensions (first revision) Indexable hardmetal (carbide) inserts with Jan 2010 rounded corners with cylindrical fixing hole - Dimensions (first revision) Specification for Circular saws for wood Oct 2008 working Specification for Miniature hand hacksaw Oct 2008 blades Tool chucks (End mill holders) with Jan 2010 clamp screws for flatted cylindrical shank tools Part 1 Dimensions of driving system of tool shanks (first revision) (Superseding IS 11440:1985) Tool chucks (End mill holders) with clamp screws for flatted cylindrical shank tools Part 2 Connecting dimensions of 164 Jan 2010
165.
IS 11523:1998 /ISO 3365:1985
166.
IS 11677:2004 /ISO 3364:1997
167.
IS 11741:1986
168.
IS 11829:1986
169.
IS 11835(Part 1): 2005
170.
IS 11835(Part 2): 2004 /ISO 5414-2: 2002
chucks and designation (first revision) 171. IS 11934:1987 Specification for Carbide tipped shell Oct 2008 reamers Specification for Carbide tipped chucking Oct 2008 reamers with morse taper shank with long cutting edge Specification for Carbide tipped long Oct 2008 fluted machine reamer with morse taper shank Specification for Carbide tipped machine Oct 2008 jig reamer with morse taper shank Specification for Tools adaptors for Oct 2008 numerically controlled machine tools (Tool s rotating type) Specification for Hard metal burrs Part Oct 2008 1: Technical supply conditions Specification for Hard metal burrs Part Oct 2008 2: Cylindrical burrs (Type A) Specification for Hard metal burrs Part Oct 2008 3: Cylindrical round (Ball) nose burrs (Type C) Specification for Hard metal burrs Part Oct 2008 4: Spherical burrs (Type D) Specification for Hard metal burrs Part Oct 2008 5: Oval burrs (Type E) Specification for Hard metal burrs Part Oct 2008 6: Arch round (Ball) nose burrs (Type F) Specification for Hard metal burrs Part Oct 2008 7: Arch pointed nose burrs (Type G) Specification for Hard metal burrs Part Oct 2008 8: Flame burrs (Type H) Specification for Hard metal burrs Part Oct 2008 9: 60 and 90 deg. cone burrs (Type J & 165 1
172.
IS 11935:1987
173.
IS 11936:1987
174.
IS 11937:1987
175.
IS 11938:1987
176.
IS 11943(Part 1): 1987 IS 11943(Part 2): 1987 IS 11943(Part 3): 1987
177.
178.
179.
IS 11943(Part 4): 1987 IS 11943(Part 5): 1987 IS 11943(Part 6):1987 IS 11943(Part 7): 1987 IS 11943(Part 8): 1987 IS 11943(Part 9): 1987
180.
181.
182.
183.
184.
K) 185. IS 11943(Part 10): 1987 Specification for Hard metal burrs Part Oct 2008 10: Conical round (Ball) nose burrs (Type L) Specification for Hard metal burrs Part Oct 2008 11: Conical pointed- nose burrs (Type M) Specification for Hard metal burrs Part Oct 2008 12: Inverted cone burrs (Type N) Specification for Turret sockets Oct 2008
186.
IS 11943(Part 11) :1987 IS 11943(Part 12) :1987 IS 11949:1987 IS 11950:1987
187.
188. 189.
Specification for Tools adaptors for Oct 2008 numerically controlled machine tools (Tool stationary type) Circular screwing dies General table of Oct 2008 dimensions Technical supply conditions for circular Oct 2008 screwing dies Specification for Circular screwing dies Oct 2008 for ISO metric threads Specification for Circular screwing dies Oct 2008 for taper pipe threads, R-series Specification for Hexagonal die nuts Oct 2008 1
190.
IS 12319:1988
191.
IS 12320:1988
192.
IS 12321:1988
193.
IS 12322:1988
194. 195.
IS 12324:1988 IS 12325:1988
Specification for Circular screwing dies Oct 2008 for ISO metric conduit pipe threads Indexable Hard metal inserts with rounded Oct 2008 corners with partly cylindrical fixing hole Dimensions (first revision) Small tools Disk type gear shaper cutter- Oct 2008 Specification Small tools Hub type gear shaper Oct 2008 cutters- Specification Small tools Shank type gear shaper Oct 2008 cutters - Specification 166
196.
IS 12354:2002 /ISO 6987: 1998
197.
IS 12536:1989
198.
IS 12537:1989
199.
IS 12538:1989
200.
IS 12687:1989
Small tools Subland twist drills with Oct 2008 morse taper shanks for holes prior to tapping screw threads- Specification Small tools Subland twist drills with Oct 2008 morse taper shanks for clearance holes and countersinks for countersunk head screws Specification Small tools Subland twist drills with Oct 2008 parallel shanks for clearance holes and counterbores for slotted cheese head screw Specification Small tools Subland twist drills with Oct 2008 morse taper shanks for clearance holes and counterbores for slotted cheese head metric screws Specification Small tools Subland twist drills with Oct 2008 parallel shanks for holes prior to tapping screw threads Specification Small tools Subland twist drills with Oct 2008 parallel shank for clearance holes and countersink for countersunk head screwsSpecification End mills with indexable inserts Oct 2008 Specification (first revision) Carbide tips Specification for dead centre Oct 2008
201.
IS 12688:1989
202.
IS 12689:1989
203.
IS 12690:1989
204.
IS 12691:1989
205.
IS 12692:1989
206.
IS 12716:2002
207.
IS 12728:1989
208.
IS 13167:1991
Side and face milling (Slotting)cutters Oct 2008 with indexable inserts Specification Countersinks 60, 90 and 120 with Oct 2008 morse taper shanks Specification Countersinks 60, 90 and 120 with Oct 2008 parallel shanks Specification Carbide tipped single point tools Oct 2008 Technical supply conditions Carbide tips Part 1: Carbide tips for Oct 2008 167 2
209.
IS 13303:1992
210.
IS 13304:1992
211.
IS 13740:1993
212.
IS 13741(Part 1):
1993
single point tools Specification (superceding IS 2162: 1979) Carbide tips Part 2: Carbide tips for Oct 2008 single point tools for light cutting operations Specification (superceding IS 8065: 1976) Carbide tips Part 3: Carbide tips for Oct 2008 single point tool blanks for sliding head type automats Specification (superceding IS 12294: 1988) Carbide tips Part 4: Carbide tips for Oct 2008 multipoint tools Specification (superceding IS 9327: 1979) Carbide tips Part 5: Carbide tips for Oct 2008 twist drills with point angle 115 Specification (superceding IS 8301: 1976) Carbide tips Part 6: Carbide tips for Oct 2008 single point threading tools Specification (superceding IS 2162: 1979) Carbide tips Part 7: Carbide tips for Oct 2008 single round nose turning tools Specification Carbide tipped single point tools ISO Oct 2008 series Part 1: Straight turning tool (ISO 1) Specification (superceding IS 2163: 1976) Carbide tipped single point tools ISO Oct 2008 series Part 2: Cranked turning and facing tool (ISO 2) Specification (superceding IS 2163: 1976) Carbide tipped single point tools ISO Oct 2008 series Part 3: Cranked finishing tool (ISO 3) Specification (superceding IS 2163: 1976) Carbide tipped single point tools ISO Oct 2008 series Part 4: Broad turning tool (ISO 4) Specification (superceding IS 2163: 168 1 1
213.
IS 13741(Part 2): 1993
214.
IS 13741(Part 3): 1993
215.
IS 13741(Part 4): 1993
216.
IS 13741(Part 5): 1993
217.
IS 13741(Part 6): 1993
218.
IS 13741(Part 7): 1993
219.
IS 13742(Part 1): 1993
220.
IS 13742(Part 2): 1993
221.
IS 13742(Part 3) :1993
222.
IS 13742(Part 4): 1993
1976) 223. IS 13742(Part 5): 1993 Carbide tipped single point tools ISO Oct 2008 series Part 5: Cranked facing tool (ISO 5) Specification (superceding IS 2163: 1976) Carbide tipped single point tools ISO Oct 2008 series Part 6: Cranked turning tool (ISO 6) Specification (superceding IS 2163: 1976) Carbide tipped single point tools ISO Oct 2008 series Part 7: Parting off tool (ISO 7) Specification (superceding IS 2163: 1976) Carbide tipped single point tools ISO Oct 2008 series Part 8: Boring tool (ISO 8) Specification (superceding IS 2163: 1976) Carbide tipped single point tools ISO Oct 2008 series Part 9: Boring and facing tool (ISO 9) Specification (superceding IS 2163: 1976) Carbide tipped single point tools IND Oct 2008 series Specification (superceding IS 2163: 1976, IS 8778: 1978, IS 10969: 1984, IS 11120: 1984, IS 11878 (Part 1): 1986, IS 11878 (Part 2): 1986, IS 11878 (Part 1): 1987, IS 11836: 1986, IS 11837: 1986) Carbide tipped single point planning tools Jan 2010 Specification Part 1 to 8 Machine tools Morse taper shanks Oct 2008 Cotter slots with taper key Slitting cutters with indexable inserts Jan 2010 1 1
224.
IS 13742(Part 6): 1993
225.
IS 13742(Part 7): 1993
226.
IS 13742(Part 8): 1993
227.
IS 13742(Part 9) :1993
228.
IS 13743 (Parts 1 to 10):1997
229.
IS 13744(Part 1 to 8): 1995 IS 13776:1993 /ISO 1080:1975 IS 14168:1995 IS 14584:1998
230.
231. 232.
Splines and serration hobs Technical Oct 2008 supply conditions for hobs Spline hobs Involute sided Specification Oct 2008
233.
IS 14585:1998
169
234.
IS 14586:1998
Serration hobs Specification
Straight
sided
Oct 2008
235.
IS 14532:1998 /ISO 3936:1993
Reduction sleeves with tenon drive with Oct 2008 external and internal 7/24 taper Dimensions Spot drills Dimensions Jan 2010
236.
IS 14775:2000 /ISO 10898: 1992 IS 14863:2000
237.
Turning and copying tool holders and Mar 2011 cartridges for indexable inserts Designation Boring bars (Tool holders with cylindrical Mar 2011 shank) for indexable inserts Designation Boring bars for indexable inserts Mar 2011 Dimensions Single point tool holders for turning and Mar 2011 copying for indexable inserts Dimensions Cartridges, Type A for indexable inserts Mar 2011 Dimensions End mills with brazed helical hard-metal Oct 2008 tips Dimensions Rotary and rotary impact masonry drill Oct 2008 bits with hard metal tips Dimensions Indexable inserts for cutting tools Oct 2008 ceramic inserts with rounded corners Part 1 Dimension of inserts without fixing hole Indexable inserts for cutting tools with Jan 2010 round corners Part 2 Dimensions of inserts with cylindrical fixing hole Single point cutting tools - Corner radii Oct 2008
238.
IS 14864:2000 /ISO 6261:1995 IS 14865:2001/ ISO 5609:1998 IS 14866:2000/ ISO 5610:1998
239.
240.
241.
IS 14867:2000 / ISO 5611:1995 IS 15067:2001
242.
243.
IS 15075:2001 / ISO 5468:1992 IS 15091(Part 1): 2002 /ISO 93611:1991 IS 15091(Part 2): 2004 /ISO 93612:1991 IS 15092:2002 / ISO 3286:1976 IS 15094:2002 /ISO 10910:1995
244.
245.
246.
247.
Classification and designation approximate chip control zones indexable inserts with chip breakers 170
of Oct 2008 for
248.
IS 15144:2002
Indexable hardmetal (Carbide) inserts Oct 2008 with rounded corners with partly cylindrical fixing hole Dimensions of inserts with 7o normal clearance for light alloy and plastic components turning Face milling cutters with indexable inserts Oct 2008 Dimensions Machine tools - Positive drive of Morse Feb 2012 tapers Selection of Hacksaw Tooth for Metal Cutting - Recommendations
249.
IS/ISO 6462:1983
250.
IS 15762: 2007 /ISO 5413: 1993 IS 15777: 2008
251.
DRAFT STANDARDS UNDER PRINTING Doc No. PGD 32 (1060)/ ISO 3438: 2003 Doc No. PGD 32 (1061)/ ISO 3439: 2003 Doc: PGD 32(1064)/ ISO 839-1:2006 Doc: PGD 32(1065)/ ISO 1832:2004 Doc: BP10(0508) Doc: BP10(0509) Doc: PGD 32 (1174)/ ISO 3338-2: 2007 Subland twist drills with morse taper shanks for holes prior to tapping screw threads(first revision of IS 12687:1989) Subland twist drills with cylindrical shanks for holes prior to tapping screw threads(first revision of IS 12691 :1989) Milling machine arbors with 7/24 tapers Part 1 Dimensions and designation (second revision of IS 8614:1993) Indexable inserts for cutting tools Designation (third revision of IS 9897:2001)
Solid Carbide Parallel Shank Twist Drills Jobber Series Solid Carbide Parallel Shank Twist Drills Stud Series Cylindrical Shanks for Milling Cutters Part 2 : Dimensional Characteristics of Flatted Cylindrical Shanks (Second Revision of IS 8692 Part 2)
DRAFT STANDARDS FINALIZED FOR PRINTING
Doc: PGD 32 (1176)/ ISO 7388-1: 2007
Tool shanks with 7/24 taper for automatic tool changers - Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF (first Revision of IS 11173 Part 1) Tool shanks with 7/24 taper for automatic tool changers Part 2: Dimensions and designation of shanks of forms J, JD and JF (First Revision of IS 11173 Part 1)
Doc: PGD 32 (1177)/ ISO 7388-2: 2007
171
Doc: PGD 32 (1178)/ ISO 7388-3: 2007
Tool shanks with 7/24 taper for automatic tool changers - Part 3: Dimensions and designation of shanks of forms J, JD and JF (First Revision of IS 11173 Part 2)
DRAFT STANDARDS COMPLETED WIDE CIRCULATON Doc: PGD 32 (1173)/ ISO 494: 2009 Cylindrical shank twist drills Long series (First Revision of IS 5102) (DOCUMENT PRESENTLY WITHELD BY COMMITTEE) Doc: BP10(0537) DOC:BP 11(0510) DOC:BP 11(0511) Micro drills (Second revision of IS 5363) Solid carbide end mills with continuous parallel shank Solid carbide end mills with stepped parallel shank
172
PGD 33 SCOPE:
TRANSMISSION DEVICES SECTIONAL COMMITTEE
a) Formulation of standards on terminology for conveyor, elevator and transmission belts; pulleys and belt drives of various sizes and shapes particularly grooved pulleys and V- flat pulleys and belts. b) Formulation of standards for gears, transmission chains; shaft ends and axle heights; splines and serrations; clutches and couplings and keys & keyways. c) Co-ordination of work with: i) ISO/TC 41 Pulleys and belts including V-belts ii) ISO/TC 41/SC 1 Friction iii) ISO/TC 41/SC 3 Conveyor belts iv) ISO/TC 41/SC 4 Synchronous belt drives v) ISO/TC 100 Chains and chain sprockets for power transmission and conveyors
CORRESPONDING ISO COMMITTEE(S): ISO/TC 41 Pulleys and Belts Including V-belts and ISO/TC 100 Chains and Chain Sprockets for Power Transmission and Conveyors SL. NO. IS NO./DOC NO. TITLE RE AFFIRM NO. OF AMED MENT
STANDARDS PUBLISHED 1. * IS 1072:1996 /ISO 4347:1992 2. IS 2031:1987 /ISO 496:1973 IS 1370:1993
Leaf chains, clevises and sheaves (second revision) Driving and driven machines Shaft heights (first revision) Transmission belting Friction surfaces rubber belting Specification (third revision) Cast iron and mild steel flat pulleys (second revision) Conveyor and elevator textile belting Specification Part 1: General purpose belting (fourth revision) Conveyor and elevator textile belting Specification Part 2: Heat resistant belting (third revision)
Jan 2006
Feb 2007
3.
Oct 2008
4.
IS 1691:1980
Dec 2010
5.
IS 1891(Pt 1): 1994
Dec 2010
6.
IS 1891(Pt 2): 1994
Oct 2008
INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS
173
SL. NO. 7.
IS NO./DOC NO.
TITLE
RE AFFIRM Oct 2008
IS 1891(Pt 3): 1988
Conveyor and elevator textile belting Specification Part 3: Oil resistant belting (second revision) Conveyor and elevator textile belting Specification Part 4: Hygienic belting (first revision) Conveyor and elevator textile belting Specification Part 5: Fire resistant belting for surface application Driving and driven machines Shaft heights (first revision) Parallel keys and keyways (second revision) Code of practice for selection, storage, installation and maintenance of belting for power transmission Part 1: Flat-belt drive (first revision) Code of practice for selection, storage, installation and maintenance of belting for power transmission Part 2: V-belt drive (first revision) Round leather belting for small machines (first revision) Tangential keys and keyways (third revision)
NO. OF AMEND MENT 3
IS 1891(Pt 4): 1978
Dec 2010
IS 1891(Pt 5): 1993
Oct 2008
10.
IS 2031:1987 /ISO 496:1973 IS 2048:1983 IS 2122(Pt 1): 1973
Feb 2007
11. 12.
Dec 2008 Dec 2010
2 1
13.
IS 2122(Pt 2): 1991
Dec 2010
14.
IS 2241:1976
Oct 2006
15.
IS 2291:1990 /ISO 3117:1977 IS 2292:1974 IS 2293:1974 IS 2294:1986
Jan 2006
16. 17. 18.
Taper kays and keyways (first revision) Gib-head kays and keyways (first revision) Woodruff kays and keyways (second revision) Straight sided splines for cylindrical shafts with internal centering Dimensions, tolerances and verification (first revision)
Feb 2007 Feb 2007 Feb 2007 2
19.
IS 2327:1993 /ISO 14:1982
Dec 2008
174
SL. NO. 20. *
IS NO./DOC NO.
TITLE
RE AFFIRM Jan 2006
NO. OF AMEND MENT
IS 2403:1991 /ISO 606:1982 IS 2458:2001 /ISO 1122-1:1998 IS 2467:2002 /ISO 701:1998 IS 2494(Pt 1): 1994
Short pitch transmission precision steel roller chains and chain wheels (second revision) Vocabulary of gear terms Definitions related to geometry (first revision) International gear notations Symbols for geometrical data (first revision) V-belts Endless V-belts for industrial purposes Part 1: General purpose Specification (second revision) V-belts Endless V-belts for industrial purposes Part 2: Fire resistant and antistatic V-belts Specification Cylindrical gears for general and heavy engineering - Part 1 Standard basic rack tooth profile (Third Revision) Cylindrical gears for general and heavy engineering - Part 2 Module (Third Revision) Power transmission Straight sided splines for machine tools Dimensions (first revision) Steel roller chains Type S and C, attachments and sprockets (second revision) Power transmission Bush type flexible couplings (second revision)
21.
Feb 2006
22.
June 2007
23.
Oct 2008
24.
IS 2494(Pt 2): 1993
Oct 2008
25.
IS 2535 (Pt 1): 2004 /ISO 53:1998
Dec 2009
26.
IS 2535 (Pt 2): 2004 /ISO 54:1996 IS 2610:1989
Dec 2009
27.
Jan 2010
28.
IS 2637:2004 /ISO 487:1998 IS 2693:1989
Mar 2010
29.
Jan 2010
30.
IS 3142:1993
Pulleys V-grooved pulleys for V-belts Oct 2008 Groove sections Z, A, B, C, D & E and endless wedge belt sections SPZ, SPA, SPB and SPC (second revision) Conveyor belts fire resistant conveyor belting for underground mines and such other hazardous applications Specification (second revision) Oct 2006 1
31.
IS 3181:1992
INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARDS 175
SL. NO.
IS NO./DOC NO.
TITLE
RE AFFIRM
NO. OF AMEND MENT
32.
IS 3542:1980
Extended pitch transmission precision roller chains and chain wheels (first revision) Short pitch transmission precision bush chains and chain wheels (first revision) Dimensions for straight sided serrations Dimensions for involute sided splines Gears Cylindrical gears-accuracies (first revision) Power transmission Shafts Dimensions for cylindrical and 1/10 conical shaft ends (second revision) Dimensions for worm gearing (first revision)
Jan 2006
33.
IS 3560:1980
Jan 2006
34. 35. 36.
IS 3654:1966 IS 3665:1966 IS 3681:1995
Mar 2010 Mar 2010 Dec 2010
37.
IS 3688:1990 /ISO/R 775:1969
Jan 2006
38. . 39.
IS 3734:1983 IS 3756:2002
Dec 2010
Method for gear correction - Addendum Oct 2007 modification for external cylindrical gears with parallel axis (first revision) Master gears (first revision) Flexible shafts for speedometers and tachographs (second revision) Gears-spur and helical gears Calculation of load capacity (first revision) Flexible shafts Straight bevel gears for general engineering and heavy engineering-Part 1 Basic rack (first revision) Straight bevel gears for general engineering and heavy engineering-Part 2 Module and diametral pitches (first revision) Dec 2010 Dec 2008 1
40. 41.
IS 4071:1986 IS 4278:1988
42.
IS 4460(Pt 1 to 3): 1995
Aug 2006
43. 44.
IS 4600:1968 IS 5037(Pt 1) :2004 /ISO 677 :1976
Jan 2006 Dec 2009
45.
IS 5037 (Part 2):2004 /ISO 678:1976
Dec 2009
176
SL. NO. 46.
IS NO./DOC NO.
TITLE
RE AFFIRM Oct 2007
NO. OF AMEND MENT
IS 5267:2002 /ISO 1122-2:1999 IS 5375:1979 |ISO 1340:1976 IS 5593:1980 IS 5635:1983 IS 6166:1971 IS 6167:1971 IS 6196:1971 IS 6276:1971 IS 6535:1979 |ISO 1341:1976 IS 6580:1972 IS 6687:2002
Vocabulary of gear terms Definitions related to worm gear geometry(first revision) Data for procurement of cylindrical gears (first revision) Belt fasteners alligator type (first revision) Automotive V-belt drives (first revision) Thin taper keys and keyways Thin parallel keys and keyways Dimensions for fitted half-couplings Flexible shafts used in concrete vibrators Data for procurement of straight bevel gears (first revision) Train lighting belt fasteners Code of practice for selection storage, installation and maintenance of conveyor belting (first revision) Code of practice for selection of standard worm and helical gear boxes Methods for load rating of worm gears (first revision) Gears Cylindrical gears Accuracies Methods of inspection (first revision) Glossary of terms and definitions relating to drives using V-belts and grooved pulleys (first revision) Endless variable-speed V-belts and groove sections of corresponding pulleys for agricultural machinery (First Revision)
47.
July 2006
48. 49. 50. 51. 52. 53. 54.
Dec 2010 Dec 2010 Jan 2006 Jan 2006 Jan 2006 Jan 2006 July 2006
3 1
55. 56.
Nov 2009 April 2007
57.
IS 7403:1974
July 2006
58.
IS 7443:2002
Apr 2007
59..
IS 7504:1995
Dec 2010
60.
IS 7923:1985
Dec 2010
61.
IS 8777:2008 /ISO3410:1989
SL. NO.
IS NO./DOC NO.
TITLE
RE AFFIRM
NO. OF AMEND MENT
62.
IS 8830: 2007 |ISO 9083:2001
Calculation of load capacity of spur and helical gears- Application to marine gears (first revision ) Accuracy requirements for turbine gears Method of test for mechanical belt fasteners Link V-belts Synchronous belt drives Belts Part 1 Pitch codes MXL, XL, L, H, XH and XXH Metric and inch dimensions (first revision) Synchronous belt drives Belts Part 2 Pitch codes MXL and XXL Metric dimensions Open ended cogged V-belting Data for procurement of worm and worm wheels Sandwich belting Open end V-belts Belt fasteners, plate type Mechanical multi-disc clutches (wet type) Dec 2010 July 2006 July 2006 Dec 2010 Dec 2010
63. 64. 65. 66.
IS 8843:1978 IS 9405:1980 IS 9515:1980 IS 9804(Part 1):2009
67.
IS 9804(Part 2):2010
68. 69.
IS 10022:1981 IS 10185:1982
70. 71. 72. 73.
IS 10213:1982 IS 10229:1982 IS 10288:1982 IS 10686:1983
Oct 2006 Oct 2006 Oct 2006 Jan 2006 1
74. 75.
IS 10911:1984 IS 11038:1984
Methods of inspection for straight bevel gears Endless hexagonal belts for agricultural machinery and groove sections of corresponding pulleys Synchronous belt drive pulleys (first revision)
Dec 2010 Oct 2008
76.
IS 11507:2009 /ISO 5294: 1989 * IS 11740:1986 IS 11842:1986
77. 78.
Chains for motorcycles PVC/Plastic hygienic belting
Jan 2006 Dec 2010 1
SL. NO.
IS NO./DOC NO.
TITLE
RE AFFIRM
NO. OF AMEND MENT
79. 80. 81. 82.
IS 11863:1986 IS 12091:1987 IS 12405:1988 IS 12854:1989
Tolerances for worm gears Belt fasteners, hook type Gear type flexible couplings Power transmission Belts, endless flat (used in lenix drive system Specification Conveyor belting Solid woven cotton/synthetic impregnated and unimpregnated Specification Part 1 Aeroslide belting for air gravity conveyor Cranked-link drag chains of welded construction, attachments and sprockets (first revision) Cranked-link mill chains of welded construction, attachments and sprockets (first revision)
Dec 2010 Oct 2006 Jan 2006 Dec 2010
83.
IS 13775(Pt 1): 1993
Oct 2008
84.
IS 13926:2005 /ISO 6971: 2002 IS 13927:2005 /ISO 6972: 2002
Mar 2010
85.
Mar 2010
86.
IS 14206(Pt 1): 1995
On-site non-mechanical jointing of plied textile reinforced rubber conveyor belting Part 1: Hot vulcanizing Code of practice On-site non-mechanical jointing of plied textile reinforced rubber conveyor belting Part 2: Cold vulcanizing joints Transmission devices Endless narrow V-belts for industrial purposes Specification Transmission devices Flexible coupling Tyre type - Specification Transmission steel roller chains and chain wheels for oil field applications - Specification Conveyor belting of elastomeric and steel cord construction of underground mines and such other hazardous applications Specification Belt drives Pulleys Limiting values for adjustment of centers
Nov 2009
87.
IS 14206(Pt 2): 2001
Jan 2006
88.
IS 14261:1995
Dec 2010
89.
IS 14285:1995
Dec 2010
90.
IS 14696:2000
Mar 2010
91.
IS 15143:2002
Sep 2007
92.
IS 15146:2002
June 2007
SL. NO.
IS NO./DOC NO.
TITLE
RE AFFIRM
NO. OF AMEND MENT
93.
IS 15147:2002 /ISO 254:1998 IS 15148:2002 /ISO 1813:1998
Belt drives Pulleys Quality, finish and balance Belt drives Pulleys and V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts Electrical conductivity of antistatic belts: Characteristics and methods of test
June 2007
94.
July 2007
95.
IS 15149:2002 /ISO 9981:1998
Belt drives Pulleys and V-ribbed belts for the May 2007 automotive industry PK profile: Dimensions
95.
IS 15151:2002 /ISO 9982:1991
Belt drives Pulleys and V-ribbed belts for industrial applications PH, PJ, PK, PL and PM profiles: Dimensions Conveyor belting of elastomeric and steel cord construction for general purpose belting Specification Double-pitch precision roller chains and sprockets for transmission and conveyors Heavy-duty cranked-link transmission chains
June 2007
97
IS 15427:2004
Mar 2010
98.
IS 15509: 2004 /ISO 1275: 1995 IS 15510: 2004 /ISO 3512: 1992 IS 15511: 2004 /ISO 9633: 2001 IS 15790:2008 /ISO 15654:2004
Dec 2009
99.
Aug 2009
100.
Cycle chains Characteristics and test methods Fatigue test method for transmission precision roller chains
Aug 2009
101.
DRAFT STANDARDS UNDER PRINT PGD 30(1158) Guidelines for the selection of roller chain drives
INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARD
180
DRAFT STANDARDS COMPLETED WIDE CIRCULATION PGD 29(1102) Conveyor belts Specification for rubber or plastics covered conveyor belts of textile construction for general use [Fifth Revision of IS 1891(Part 1):1994] Belt Drives V-Belts for the Automotive Industry and corresponding pulleys Dimensions (Second Revision of IS 5635:1983) Steel cord conveyor belts -- Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use (First Revision of IS 15427:2004) Conveyor belts -Determination of elastic and permanent elongation and calculation of elastic modulus Conveyor belts fire resistant conveyor belting for underground mines and such other hazardous applications Specification (second revision)[Amendment to IS 3181:1993] Gear type flexible couplings (Amendment No. 1 to IS 12405) Short -pitch transmission precision roller and bush chains, attachments and associated chain sprockets (third revision of IS 2403:1991) Leaf chains, clevises and sheaves Dimensions, measuring forces and tensile strengths (third revision of IS 1072:1996) Motorcycle chainscharacteristics and test methods (first revision of IS 11740 :1986 )
PGD 29(1103)
PGD 29(1106)
PGD 29(1107)
PGD 29(1168)
PGD 30(1148) PGD 30(1149)
PGD 30(1150)
PGD 30(1157)
INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICATES DUAL NUMBERED STANDARDS | INDICATES EQUIVALENT STANDARD
181
PGD 34
HAND TOOLS SECTIONAL COMMITTEE
SCOPE: a) Standardization in the field of pliers, nippers, wrenches, files, non-spark safety tools and other assembly tools, b) Standardization in the field of earth working, metal working tools and wood working hand tools and manually portable forest machinery c) Co-ordination of work with: i) ISO/TC 29 Small tools ii) ISO/TC 29/SC 10 Assembly tools for screws and nuts, pliers and nippers iii) ISO/TC 23/SC 17 Manually portable forest machinery
CORRESPONDING ISO COMMITTEE(S): ISO/TC 29 Small tools ISO/TC 29/SC 10 Assembly Tools for Screws and Nuts, Pliers and Nippers ISO/TC 23/SC 17 Manually portable forest machinery SL. NO. IS NO./DOC NO. TITLE REAFFIRM NO. OF AMEND MENTS
STANDARDS PUBLISHED 1. IS 273:1990 Picks and beaters Specification (fourth revision) Specification for Shovels Part 1 General purpose shovels; Part 2 Heat treated shovels (third revision) Cold chisels - Specification (third revision) Specification for round punches (second revision) Specification for blacksmiths anvils (third revision) Specification for smith bits (revised) Specification for adzes (second revision) Axes Specification (second revision) Specification for crow-bars and clawbars (second revision) Feb 2008 1
2.
IS 274:1981
Feb 2008
3.
**
IS 402:1990
Feb 2008
4.
IS 413:1974
Feb 2008
5.
IS 510:1986
Feb 2008
6. 7.
IS 552:1965 IS 663:1980
Oct 2008 Oct 2008
8. 9.
IS 703:1999 IS 704:1984
June 2010 June 2010 2
182
10.
IS 841:1983
Specification for steel hammers (second revision) Specification for smith swages (first revision) Specification for smith tongs (first revision) Screwdriver Part 1: Technical supply conditions (second revision)
June 2010
11.
IS 842:1968
Oct 2008
12.
IS 843:1968
Oct 2008
13.
IS 844(Part 1) :1979
Jan 2011
14.
IS 844(Part 2): 1979
Screwdriver Part 2: Dimensions (second revision)
Jan 2011
15.
IS 844 (Part 3): 1979
Screwdriver Part 3: Dimensions for screw drivers for recessed head screws(second revision)
Jan 2011
16.
IS 845:1974
Specification for swage blocks and stands (first revision) Specification for smiths flatters (first revision) Specification for smith fullers (first revision) Specification for powrahs (second revision) Woodworking tools - Chisels and gouges (third revision) Engineers files Specification (third revision) Spanners and sockets width across flats (third revision) Open jaw wrenches (Spanners)Specification(fifth revision) Ring wrenches (Spanners)Specification (fourth revision) Specification for Box spanners 183
Oct 2008
17.
IS 846:1968
June 2010
18.
IS 847:1968
June 2010
19.
IS 1759:1986
Feb 2008
20.
IS 1930:2003 / ISO 2729:1995 IS 1931:2000
Feb 2008
21.
Jan 2011
22.
IS 2027:1992
Feb 2008
23.
IS 2028: 2004
July 2009
24.
IS 2029:1998
Feb 2008
25.
IS 2030:1989
July 2009
(second revision) 26. IS 2586:1986 Specification for bench vices (second revision) Feb 2008 1
27.
IS 2587:1975
Specification for pipe vices (Open side Oct 2008 type and fixed sides type) (first revision) Specification for blacksmiths vices (first revision) Pliers, pincers and nippers Technical supply conditions (second revision) Carpenters augers - Specification (first revision) Specification for keys for lathe chucks (first revision) Assembly tools for screws and nuts Hexagon socket screw keys (third revision) Specification for Needle files (first revision) Specification for Eyelet pliers Pliers Flat nose without cutter, longSpecification (second revision) Oct 2008 Oct 2008
28.
IS 2588:1975
29.
IS 2615:1989
July 2009
30.
IS 2852:1998
Feb 2008
31.
**
IS 2989:1980
Oct 2008
32.
IS 3082: 2008 /ISO 2936:2001
33.
IS 3152:1980
34. 35.
IS 3529:1966 IS 3552:1989 |ISO 5745:1982 IS 3568:1990
Oct 2008 July 2009
36.
Round nose pliers - Specification (first Jan 2011 revision) Specification for Burner pliers Specification for Rasps (second revision) Specification for Combination side cutting pliers (second revision) Specification for Pipe wrenches Part 1: General purpose (first revision) Specification for Pipe wrenches Part 2: Heavy duty (first revision) Oct 2008 Oct 2008 1
37. 38.
IS 3569:1966 IS 3587:1986
39.
IS 3650:1981
Jan 2011
40.
IS 4003(Part 1): 1978 IS 4003(Part 2): 1986
Jan 2011
41.
Feb 2008
184
42.
IS 4017:1992
Carpenters squares - Specification (first revision) Pincers - Specification (second revision) Specification for Chain pipe wrenches (first revision) Specification for Nippers Part 1: Diagonal cutting nippers (second revision)
Oct 2008
43.
IS 4095:1991
Feb 2008
44.
IS 4123:1982
Jan 2011
45.
**
IS 4378(Part 1): 1990 | ISO 5749: 1982
Feb 2011
46.
**
IS 4378(Part 2): 1990| ISO 5748: 1982
Specification for Nippers Part 2: End cutting nippers (second revision)
Feb 2011
47.
IS 4481:1988
Specification for Dock-bill pliers (first revision) Specification for track spanners for railways Specification for pipe wrenches, foot print type Hand tools Forks, general purpose (first revision) Open ended slugging wrenches (Spanners) Specification (first revision) Ring slugging wrenches (Spanners) Specification (first revision)
Oct 2008
48.
IS 4485:1968
Oct 2008
49.
**
IS 4500:1967
Oct 2008
50.
**
IS 4506:1989
June 2010
51.
IS 4508:1992
Feb 2008
52.
**
IS 4509:1992
Feb 2008
53.
IS 4595:1969
General requirements for non-sparking Jan 2011 tools Specification for heat-coil pliers Specification for welders chipping hammer Specification for battery terminal pliers Jan 2011 June 2010 1
54. 55.
IS 4806:1968 IS 4915:1968
56.
IS 5006:1968
July 2009
185
57. 58. 59. 60. 61.
IS 5066:1969 IS 5067:1969 IS 5068:1969 IS 5087:1969 IS 5098:1969
Specification for glass pliers Specification for fencing pliers Specification for grab book Specification for wire stripping pliers Specification for cross cut and rip saws Specification for tyre levers Specification for tenon and dovetail saws Specification for punched open-jaw wrenches (Spanners)(first revision)
July 2009 July 2009 July 2009 July 2010 June 2010 1
62. 63. **
IS 5122:1969 IS 5123:1969
July 2009 June 2010
64.
IS 5167:1981
Jan 2011
65.
IS 5169:1986
Specification for hacksaw frames (first Feb 2008 revision) Bolt clippers- Specification (first revision) Specification for jim crows Snipe nose pliers Specification (first revision) Specification for brick and masons chisels Specification for pipe vices (chain type) Specification for ripping chisels Specification for ballast rakes Specification for pipe grip pliers Specification for rail tongs for railways Tommy bars for box spanners (first revision) Specification for pipe vices (Hinged type) 186 Oct 2008
66.
IS 5200:1998
67. 68.
IS 5657:1970 IS 5658:1990
June 2010 Jan 2011
69.
IS 5663:1970
June 2010
70.
IS 5684:1970
June 2010
71. 72. 73. 74.
IS 5697:1970 IS 5991:1971 IS 5995:1971 IS 6000:1971
June 2010 June 2010 Jan 2011 June 2010
1 1 1
75.
IS 6002:1992
Feb 2008
76.
IS 6007:1971
June 2010
77.
**
IS 6078:1986 |ISO 5746:1982 IS 6086:1990 |ISO 5747:1984 IS 6087:1971
Specification for linemans pliers (second revision) Parallel action flat nose pliers Specification (first revision) Specification for metal cutting shears Multiple slip-joint pliers Specification (first revision) Specification for square box wrenches (Spanners) Single square socket tee wrenches (Spanners) Specification (first revision) Technical requirements for hand operated wrenches (Spanners) and sockets (first revision) Single-ended open-jaw adjustable wrenches (first revision) Assembly tools for screws and nuts Nomenclature (second revision) Specification for hexagonal box wrenches (Spanners) Wood splitting wedges - Specification (first revision) Single ended ring wrenches(Spanners) Specification (first revision) Combination wrenches with equal openings- Specification (second revision) Claw hammers - Specification (first revision) Assembly tools for screws and nuts Hand torque tools Requirement and test methods for design conformance testing, quality conformance testing and recalibration 187
Feb 2008
78.
**
Jan 2011
79. 80. **
Jan 2011 Jan 2011
IS 6118:1991 |ISO 8976:1988 IS 6129:1971
81.
Oct 2008
82.
**
IS 6130:1989
July 2009
83.
IS 6131:1980
Oct 2008
84.
IS 6149:1984
Jan 2011
85.
**
IS 6293:1996 |ISO 1703:1983 IS 6374:1971
July 2006
86.
July 2010
87.
IS 6375:1991
Feb 2008
88.
IS 6379:1989
Jan 2011
89.
IS 6389:1998
Oct 2008
90.
**
IS 6546:1989
June 2010
91.
IS/ISO 6789: 2003
Oct 2008
procedure (superseding IS 7145:1973 & IS 7268:1974) 92. 93. ** IS 6835:1973 IS 6836:1973 Specification for drifts Specification for hand snaps and setups for solid rivets Jan 2011 Jan 2011 1
94.
IS 6837:1973
Specification for three wheel type pipe Feb 2008 cutters Specification for wrecking bars Technical supply conditions for pipe cutters (first revision) Specification for wood and leather marking punches (first revision) Specification for wire basket for screening ballast Specification for pin punches Specification for engineers scrappers Specification for metal marking punches (first revision) Specification for link type pipe cutters Specification for ballast screen Jan 2011 Jan 2011
95. 96.
IS 6841:1973 IS 6843:1984
97.
IS 6844:1984
June 2010
98.
IS 6845:1973
Jan 2011
99. 100. ** 101.
IS 6860:1973 IS 6861:1973 IS 6864:1984
Jan 2011 Jan 2011 Jan 2011
102. 103. 104. 105.
IS 6881:1973 IS 6883:1973 IS 6891:1973 IS 6892:1973
Jan 2011 Jan 2011 1
Specification for carpenters auger bits June 2010 Specification for blacksmiths bickiron Specification for smiths anvil cutters Specification for carpenters plain brace Specification for carpenters ratchet brace Specification for bending bars Technical supply conditions for carpenters braces 188 Jan 2011
106. 107.
IS 7040:1973 IS 7041:1973
Jan 2011 June 2010 1
108.
IS 7042:1973
June 2010
109. 110.
IS 7077:1973 IS 7125:1974
Jan 2011 Oct 2008
111.
IS 7177:1999
Centre punches Specification (first revision) Specification for driving squares for hand sockets wrenches Specification for engineers ratchet braces Specification for hand operated square drive socket wrenches (first revision) Specification for box spanners for rail screws Specification for flare nut wrench, double ended, flat Specification for hand vices
June 2010
112.
IS 7214:1974
Oct 2008
113.
IS 7222:1974
Oct 2008
114.
IS 7381:1986 |ISO 2725:1987 IS 7663:1975
Oct 2008
115.
Oct 2008
116. **
IS 7939:1976
Oct 2008
117. 118. **
IS 7958:1976 IS 7975(Pt 1):1976 |ISO 3315:1988
Oct 2008
Driving parts for hand-operated square July 2009 drive socket wrenches Part 1: Technical supply conditions Driving parts for hand-operated square July 2009 drive socket wrenches Part 2: Dimensions (first revision) Specification for pliers for internal circlips Specification for pliers for external circlips Attachments for hand operated square drive socket wrenches - Specification (first revision) Specification for power operated square drive socket wrenches (Impact) (first revision) Specification for driving squares for power socket wrenches Specification for pin vices Carpenters wooden bodied planes Specification (first revision) 189 Oct 2008
119.
IS 7975(Pt 2):1991
120. **
IS 7989:1976
121. **
IS 7990:1976
Oct 2008
122. *
IS 7991:1991 |ISO 3316:1988
Feb 2008
123.
IS 7993:1988
Oct 2008
124.
IS 7996:1976 |ISO 1174:1975 IS 8177:1976 IS 8202:1999
Oct 2008
125. 126.
Oct 2008 June 2010
127.
IS 8668:1984 |ISO 2352:1982 IS 8669:1992
Dimensions for spiral ratchet screw driver shanks (first revision) Hexagon drive ends for power tools Dimensions (first revision) Specification for screwdrivers for hexagon insert bits Specification for nail puller Pliers-flat nose without cutter, short Specification (first revision) Specification for farriers chisels with handle Specification for hook spanners (first revision) Specification for copper hammers Specification for Aluminium hammers Specification for C-clamps (first revision) Specification for bearing pullers (first revision) Specification for lock grip pliers Specification for poker Specification for pad saws Specification for roving punches
Jan 2011
128. **
July 2010
129. **
IS 8670:1977
Oct 2008
130. 131.
IS 8671:1977 IS 8672:1989 |ISO 5745:1982 IS 8673:1977
Oct 2008 July 2009
132.
Oct 2008
133. **
IS 9063:1986
Feb 2008
134. 135. 136.
IS 9064:1979 IS 9065:1979 IS 9181:1988
Jan 2011 June 2010 Oct 2008 1
137.
IS 9193:1988
Oct 2008
138. 139. 140. 141. 142. 143. 144.
IS 10372:1982 IS 10375:1982 IS 10826:1984 IS 10827:1984 IS 10838:1984 IS 10839:1984 IS 10860:1984
Oct 2008 June 2010 June 2010 June 2010 1 1 1 1
Specification for nylon faced hammers June 2010 Specification for jewellers saw Specification for carpenters wooden bodied bead planes Specification for single wheel type pipe cutters Specification for carpenters vice 190 June 2010 June 2010
145.
IS 10883:1984
June 2010
146.
IS 10886:1984
June 2010
147. 148. 149. **
IS 11250:1985 IS 11251:1985 IS 11379:1985
Specification for bow saw frames Specification for bow saw blades Specification for wrenches for retaining screw for milling arbor Specification for extractor, cotton pin Specification for parallel clamps Nomenclature for pliers, pincers and nippers Specification for miniature hand hacksaw frames Spoke wrenches for bicycle and moped Specification for crowfoot spanners Specification for hexagonal socket offset wrenches Specification for hide faced hammers Specification for hand burnishers Specification for two-men cross cut saws Specification for reversible handles for cross cut saws Specification for adaptors for hexagonal insert bits for use with ratchet screwdriver Specification for ratchet screwdrivers Specification for spiral ratchet screwdrivers Specification for screw driver bits for use with ratchet screw drivers: Part 1 For slotted head screws Specification for screwdriver bits for 191
Jan 2011 Jan 2011 Jan 2011
150. 151. 152. *
IS 11381:1985 IS 11458:1985 IS 11526:1986 |ISO 5742:1982 IS 11828:1987
June 2010 June 2010 Feb 2008
1 1
153.
Feb 2008
154.
IS 11847:1987
Feb 2008
155. ** 156.
IS 11848:1987 IS 11874:1987
Feb 2008 Feb 2008
157. 158. 159.
IS 11940:1987 IS 11941:1987 IS 12127:1987
Feb 2008 June 2010 June 2010 1
160.
IS 12128:1987
June 2010
161.
IS 12153:1987
Feb 2008
162. 163.
IS 12166:1987 IS 12167:1987
Feb 2008 Feb 2008
164.
IS 12168(Pt 1):1987
Feb 2008
165.
IS 12168(Pt
Feb 2008
2):1987
use with ratchet screwdrivers Part 2: For cross recessed head screws Specification for spanners for conveyors belt - fasteners Specification for setting iron for twomen cross cut saws Specification for wooden jointer for two-men cross cut saws Specification for nut drivers Specification for square drive extension for hexagon insert bits for power socket wrenches Hexagon drive extensions (Adaptors) for hexagon insert bits for power socket wrenches Specification for spiral tapered screw extractors Specification for hexagonal insert bits for hexagon socket head cap screws and hexagon socket set screws for power tools Wooden setting cat for two-men cross cut saws Specification for cross rim wrenches Specification for rubber mallets Sealing pliers - Specification Watch makers hammer, flat face Specification Belt punches for conveyor belt fasteners (Plate type) - Specification Nippers, end cutting Toggle lever assisted Specification Dolly blocks for use in steel body repairs General requirements 192 Oct 2008
166.
IS 12403:1988
167.
IS 12412:1988
June 2010
168.
IS 12413:1988
June 2010
169. 170.
IS 12453:1988 IS 12470:1988
Oct 2008 Oct 2008
171.
IS 12476:1988
Oct 2008
172.
IS 12480:1988
Oct 2008
173.
IS 12481:1988
Oct 2008
174.
IS 12515:1988
June 2010
175. ** 176. 177. 178.
IS 12521:1988 IS 12522:1988 IS 12577:1989 IS 12578:1989
Oct 2008 Oct 2008 July 2009 June 2010
179.
IS 12858:1989
June 2010
180.
IS 12985:1990
Jan 2011
181.
IS 13040:1991
Jan 2011
182.
IS 13093:2002
Sheet metal body repair steel hammers June 2010 General requirements (first revision) Lead hammers - Specification Slip joint pliers - Specification Carpenters bevels - Specification Electronics pliers and nippers Nomenclature Pliers and nippers for electronics Technical supply conditions Pliers and nippers for electronics Single purpose nippers End cutting nippers Specification Pliers and nippers for electronics Single purpose nippers Diagonal cutting nippers Specification Pliers and nippers for electronics Single purpose nippers Oblique cutting nippers Specification Pliers and nippers for electronics Single purpose pliers Round nose pliers - Specification Feb 2008 Feb 2008 Feb 2008 Oct 2008
183. 184. ** 185. 186. **
IS 13189:1991 IS 13323:1992 IS 13345:1992 IS 13610:1993 |ISO 8979:1988 IS 13636:1993
187.
Oct 2008
188.
IS 13761:1993
Oct 2008
189.
IS 13762:1993
Oct 2008
190.
IS 13763:1993
Oct 2008
191.
IS 13764:1993
Oct 2008
192.
IS 13765:1993
Pliers and nippers for electronics Oct 2008 Single purpose pliers Flat nose pliers - Specification Pliers and nippers for electronics Single purpose pliers Snipe nose pliers - Specification Nippers Lever assisted Diagonal cutting - Specification Oct 2008
193.
IS 13766:1993
194.
IS 13887:1993 |ISO 5747:1984 IS 13888:1993 |ISO 5747:1984 IS 15385:2003 /ISO 2726:1995
Oct 2008
195.
Nippers Lever assisted End cutting Oct 2008 Specification Woodworking tools metal-bodied bench planes, plane cutters and cap irons June 2010
196.
193
DOCUMENTS UNDER PRINTING PG 05(1127) Draft Amendment No. 1 to IS 1931: 2000 Engineer's Files Specification (Third Revision) Draft Amendment No.1 to IS 2030: 1989 Box Spanners Specification (Second revision) Draft Amendment No. 2 to IS 6149: 1984 Specification for Single-ended Open-jaw Adjustable Wrenches (First Revision) Pliers and nippers -- Nomenclature (First Revision of IS 11526)
PG 05(1128)
PG 05(1129)
PG 05(1131)
DOCUMENTS FINALIZED FOR PRINTING PGD 05(1130) Assembly tools for screws and nuts Attachments for hand-operated square drive socket wrenches -- Dimensions and tests (Second Revision of IS 7991)
DOCUMENTS UNDER WIDE CIRCULATION Doc: PGD 34(1208) /ISO 1173: 2001 Assembly tools for screws and nuts Drive ends for hand- and machineoperated screwdriver bits and connecting parts Dimensions, torque testing (Second revision of IS 8669) Pliers and nippers Lever assisted side cutting pliers, end and diagonal cutting nippers Dimensions and test values (Second revision of IS 6086) Assembly tools for screws and nuts Four-way socket wrenches Dimensions and torque test (First revision of IS 12521)
Doc: PGD 34(1209) / ISO 5747: 1995 Doc: PGD 34(1210) / ISO 6788: 1997
194
ANNEX A LIST OF INDIAN STANDARDS WITHDRAWN / SUPERSEDED Sl. No. 1. 2. 3. Committee No. PGD 20 PGD 20 PGD 02 IS No. Title
IS 3:1949 IS 448:1954 IS 519:1954
Inch-millimetre conversion for industrial use (withdrawn) Unified screw threads (revised) (withdrawn) T-bolts and T-nuts (Superseded by IS 2013, 2014 and 2015) Solid woven impregnated cotton belting for power transmission (second revision) (withdrawn) Twist drills (Superseded by IS 5099 to 5108) Centre drills (Superseded by IS 6708, 6709 and 6710) Code of practice for general engineering drawings (second revision) (withdrawn) Dimensions for screw threads (below 6 mm) (withdrawn) Conversion tables for ordinary use (revised) (withdrawn) Metric steel tape measures winding type (revised) [Superseded by IS 1269(Pt 2):1977] General plan for metric screw threads with ISO profile (diameter range 0.25 to 300 mm) (Superseded by IS 4218) Dimensions for screw threads for general purposes (diameter range 1.6 to 39 mm) (revised) (Superseded by IS 4218) General requirements for washing instruments (obsoslet) Dimensions for milling centers (Superseded by IS 6322 to 6352) Reamers (Superseded by a number of standards under PGD 32)
4.
PGD 29
IS 529:1976
5. 6. 7.
PGD 10 PGD 10 PGD 24
IS 599:1960 IS 664:1963 IS 696:1972
8. 9. 10.
IS 886:1957 IS 1020:1963 IS 1270:1965
11.
PGD 20
IS 1330:1958
12.
PGD 20
IS 1362:1962
13. 14.
PGD 26 PGD 11
IS 1432:1959 IS 1831:1961
15.
PGD 10
IS 1836:1961
195
16. 17.
PGD 10 PGD 20
IS 1859:1961 IS 1926:1961
Thread cutting dies (Superseded by IS 12319 to 12325) Equivalent metric units for quantities in mechanical engineering (withdrawn) Screwing tape (Superseded by IS 6171 to 6175) Recommendations for limits and fits for sizes above 500 mm upto 3150 mm [Superseded by IS 919(Pt 1)] Allowable deviations for dimensions without specified tolerances [Superseded by IS 2102(Pt 1):1993] Dimensions for carbide tips for single point turning tools (first revision) [Superseded by IS 13743(Pt 1 and 6):1993] Carbide tipped for single point turning tools (first revision) [Superseded by IS 13742(Pt 1 to 9):1993] Milling arbors (Superseded by IS 8611 to 8621) Accessories for milling arbors (Superseded by IS 8611 to 8621) Test chart for milling machines with table of variable height, with horizontal spindle (Superseded by IS 2200 Par 2: 2002) Test Chart for Milling Machines with Table of Variable Height, with Vertical Spindle (Superseded by IS 2200 Par 3: 2002) Vegetable tanned leather belting for power transmission (first revision) (withdrawn) Dimensions for gauge limits for ISO metric screw threads (1.6 to 39 mm) (withdrawn) Specification for slotted grub screws (first revision) (superseded by IS 15629:2005) Precision hexagon bolts, screws, nuts and lock nuts (dia range 1.6 to 5 mm) (first revision) [Superseded by IS 1364(Pt 1 to 5)] Sizes for general purpose lathes (withdrawn) Boundary dimensions for rolling bearings for general engineering purposes (Superseded by IS 5692, 5932 and5935) 196
18. 19.
PGD 10 PGD 20
IS 1988:1962 IS 2101:1962
20.
PGD 20
IS 2102:1969
21.
PGD 12
IS 2162:1979
22.
PGD 12
IS 2163:1979
23. 24.
PGD 11 PGD 11
IS 2169:1963 IS 2170:1963
25.
PGD 03
IS 2200: 1994
26.
PGD 03
IS 2201: 1994
27.
PGD 29
IS 2240:1976
28.
PGD 25
IS 2386:1963
29.
PGD 31
IS 2388:1971
30.
PGD 31
IS 2389:1968
31. 32.
PGD 03 PGD 13
IS 2392:1963 IS 2513:1963
33.
PGD 02
IS 2583:1963
Dimensions for camlock type spindle nose and back plates [Superseded by IS 2582 (Pt 2)] Reduction leeves and extensions sockets for morse tapers [Superseded by IS 2582 (Pt 2)] Method for sampling of fasteners (first revision) [Superseded by IS 1367 (Pt 17):1996] Specification for slide rules (linear type) (obsolete) Guide for the selection of fits (first revision) [contents covered in IS 919 (Pt 1):1993] Parallel keys and keyways for machine tools (Superseded by IS 2048) Dimensions for cranked handle (withdrawn) Dimensions for screw threads for bolts and nuts (dia range M 42 to M 150) [covered in IS 4218 (Pt 5)] Cotton ropes for power transmission (withdrawn) Recommendations for tapping drill sizes (Superseded by IS 10952) Dimensions for petrolens industry pipe threads Part 1: Line pipe threads (withdrawn) Dimensions for petrolens industry pipe threads Part 2: Casing round threads (withdrawn) Dimensions for petrolens industry pipe threads Part 3: Tubing round threads (withdrawn) Dimensions for petrolens industry pipe threads Part 4: Buttress casing threads (withdrawn) Go and no go snap gauges for size range 3 to 250mm (first revision) (withdrawn) Plain plug gauges (withdrawn) Recommendation on the international system (SI) units (withdrawn) (Superseded by IS 10005) Dimensions for forged end type rigid couplings (Base standard DIN 760:1937 has been withdrawn) 197
34.
PGD 10
IS 2608:1964
35.
PGD 31
IS 2614:1968
36. 37.
PGD 22 PGD 20
IS 2666:1963 IS 2709:1982
38.
PGD 30
IS 2710:1975
39. 40.
PGD 02 PGD 30
IS 2793:1964 IS 3139:1966
41. 42.
PGD 29 PGD 10
IS 3143:1965 IS 3230:1970
43.
PGD 20
IS 3333(Pt 1):1967
44.
PGD 20
IS 3333(Pt 2):1967
45.
PGD 20
IS 3333(Pt 3):1967
46.
PGD 20
IS 3333(Pt 4):1967
47.
PGD 25
IS 3477:1973
48. 49.
PGD 25 PGD 20
IS 3484:1966 IS 3616:1966
50.
PGD 30
IS 3653:1966
51.
PGD 32
IS 3697:1966
Boundary dimensions for taper roller bearings (superseded by IS 7640 and 7461) Specification for emery fillets (obsolete) Fasteners Hexagon nuts Style 2 Boduct grades A & B [Superseded by IS 1364(Part 6):2002] Carpentrs adjustable metal bodid bench planes (first revision) Accuracy requirements for coarse quality low speed gears (Superseded by IS 3681:1995) Accuracy requirements for medium quality medium speed gears (Superseded by IS 3681:1995) Firm-joint dividers (withdrawn) Spring callipers (first revision) (withdrawn) Spring dividers (withdrawn) Firm-joint inside and outside callipers (withdrawn) ISO metric screw threads Part 5: Tolerances (first revision) [Superseded by IS 14692(Pt 3):2001] ISO metric screw threads Part 6: Limits of sizes for commercial bolts and nuts (diameter range 1 to 52 mm) (first revision) Roughness comparison specimens Part 1: Turned, ground, bored, milled, shaped and planed (first revision) Roughness comparison specimens Part 2: Spark-eroded, shot-blasted and grit blasted and polished (first revision) Roughness comparison specimens Part 3: Cast surface (first revision) Portable scale for jewelers (withdrawn) Test chart for capstan and turret lathes (withdrawn) Performance requirements for auto-rickshaw meters distance cum-time type (withdrawn) Plat snap gauges (withdrawn) (see IS 8023) Basic dimensions for square threads (withdrawn) 198
52. 53.
PGD 09 PGD 31
IS 3755: 1966 IS/ISO 4033:1979
54.
PGD 06
IS 4057:1986
55.
PGD 30
IS 4058:1967
56.
PGD 30
IS 4059:1967
57. 58. 59. 60. 61.
PGD 25 PGD 25 PGD 25 PGD 25 PGD 20
IS 4019:1967 IS 4052:1983 IS 4083:1967 IS 4189:1967 IS 4218 (Pt 5):1979
62.
PGD 20
IS 4218 (Pt 6):1978
63.
PGD 25
IS 4290(Pt 1):1992
64. 65.
PGD 25 PGD 25
IS 4290(Pt 2:1992 IS 4290(Pt 3):1992
66. 67. 68.
IS 4532:1968 IS 4537:1968 IS 4539:1968
69. 70.
PGD 25 PGD 20
IS 4583:1968 IS 4694:1968
71.
PGD 30
IS 4702:1968
Accuracy requirements for high precision gears (Superseded by IS 3681:1995) Accuracy requirements for precision gears (Superseded by IS 3681:1995) Plastic slide fasteners (first revision) Sizes for planning machines (withdrawn) Tap wrenches (withdrawn) Grease nipple, small (withdrawn) {see IS 4009 (Pt 2): 1981] Lubricating plugs [Superseded by IS 4009 (Part 3):1995] Gauge for wire diameters (withdrawn) Performance requirements for auto-rickshaw meter distance type (withdrawn) Slotted countersunk head and slotted raised countersunk head screws, small head series (dia range 1.5 to 6 mm) (Superseded by IS 1365 and 8911) Recommendations for tapping drill sizes for fastening pipe threads (Superseded by IS 10952) Specification for circular threaded cutting dies for conduit threads Sizes for shaping machines (withdrawn) Machine jig reamers (Superseded by IS 11002) Gauging members for plain plug gauges no go member (dia range 1 to 30 mm) (Superseded by IS 6137) Hand taps for pipe threads, parallel (first revision) (withdrawn) Nut screwing tap for ISO metric screw threads, coarse [Superseded by IS 6175 (Pt 5):1991] Gauging members for plain plug gauges no go member (size range 30 to 100 mm) (Superseded by IS 6244) Gauging members for plain plug gauges no go member 199
72.
PGD 30
IS 4725:1968
73. 74. 75. 76.
PGD 14 PGD 03 PGD 10 PGD 19
IS 4829:1983 IS 4872:1968 IS 4917:1968 IS 4974:1968
77. 78. 79.
IS 5019:1968 IS 5049:1969 IS 5222:1969
80.
PGD 31
IS 5308:1969
81.
PGD 10
IS 5617:1970
82.
PGD 10
IS 5618:1970
83. 84. 85.
IS 5990:1971 IS 6091:1971 IS 6138:1971
86.
PGD 10
IS 6172:1979
87.
PGD 10
IS 6174:1971
88.
PGD 25
IS 6245:1971
89.
PGD 25
IS 6247:1971
(size range 100 to 250 mm) (Superseded by IS 6246) 90. PGD 29 IS 6583:1989 Power transmission belts Train lighting belting Specification (first revision) No go plain ring gauges (size range 1 to 315 mm) (Superseded by IS 3485) Technical supply conditions for torque wrenches (Superseded by IS/ISO 6789:2003) Rigid case with indicator dial type torque wrench (withdrawn) Click type torque wrenches (Superseded by IS/ISO 6789:2003) Bore type milling cutters for indexable inserts Designation Specification for recess penetration gauges (first revision) [Requirements covered in IS 7478: 2011] Specification for cross recessed countersunk head screws (first revision) (Based standard ISO 7046:1983 splited into ISO 7046-1:1994 and ISO 7046-2:1990) splited into IS 7485(Part 1):2005 and IS 7485(Part 2):2005 Sizes for drilling machines Sizes for milling machines with table of various height with horizontal or vertical spindle (withdrawn)
91.
PGD 25
IS 6633:1972
92.
PGD 05
IS 7145:1974
93.
PGD 05
IS 7210:1974
94.
PGD 05
IS 7268:1974
95. 96.
PGD 11 PGD 31
IS/ISO 7406:1986 IS 7479:1985
97.
PGD 31
IS 7485:1985
98. 99.
PGD 03 PGD 03
IS 7764:1975 IS 7765:1975
100.
PGD 10
IS 7796:1975
Hand taps for pipe threads, taper [Superseded by IS 6175 (Pt 8):1991] Long shank machine taps with nominal diameters from M 3 to M 24 [Superseded by IS 6175 (Pt 4):1991] Shank type milling cutters for indexable inserts Designation Sizes for radial drilling machines (withdrawn) Dimensions for carbide tips for light cutting operations [Superseded by IS 1374 (Pt 2):1993] Guide for selection of fitment bores for cylindrical shaft ends (contents covered in IS 919)
101.
PGD 10
IS 7821:1975
102.
PGD 11
IS/ISO 7848:1986
103. 104.
PGD 03 PGD 12
IS 7936:1976 IS 8065:1976
105.
PGD 20
IS 8192:1976
200
106.
PGD 06
IS 8203:1976
Carpenters wooden bodied nose planes (amalgamated with IS 8202:1999) Carpenters wooden bodied jack planes (amalgamated with IS 8202:1999) Carpenters wooden bodied try planes (amalgamated with IS 8202:1999) Carpenters wooden bodied smoothing planes (amalgamated with IS 8202:1999) Cut irons and cap irons for carpenters wooden bodied bench planes (amalgamated with IS 8202:1999) Technical supply conditions for carpenters wooden bodied bench planes (amalgamated with IS 8202:1999) Guide for safety procedures in hand operated hand tools (withdrawn) Dimensions for carbide tips for drills with point angle 115 (type AB) (amendment 1) [Superseded by IS 13741 (Pt 5)] Nomenclature and terminology of fasteners (Superseded by IS 8535:1987) Milling arbors with morse taper and positive drive (withdrawn) Stub milling arbors with morse taper and positive drive (withdrawn) Stub milling arbors with morse taper and with key (withdrawn) Single point carbide tipped external threading tools, (IND 2) (55 or 60) [Superseded by IS 13743 (Pt 2):1997] Screw threads micrometers (withdrawn)
107.
PGD 06
IS 8204:1976
108.
PGD 06
IS 8205:1976
109.
PGD 06
IS 8206:1976
110.
PGD 06
IS 8209:1976
111.
PGD 06
IS 8210:1976
112.
PGD 05
IS 8235:1976
113.
PGD 12
IS 8301:1976
114.
PGD 31
IS 8537:1972
115.
PGD 11
IS 8612:1977
116.
PGD 11
IS 8613:1977
117.
PGD 11
IS 8617:1977
118.
PGD 12
IS 8778:1978
119.
PGD 25
IS 9112:1979
120.
PGD 10
IS 9169:1979
Dimensions for thread cutting elements for hand taps and machine taps-serial [Superseded by IS 6173 (Pt 1):1993] Tolerances for radial rolling bearings with shields or seals (withdrawn) Dimensions for carbide tips for reamers, core drills, end 201
121.
PGD 13
IS 9247:1979
122.
PGD 12
IS 9327:1979
mill and slot milling cutters [Superseded by IS 13741 (Pt 4):1993] 123. PGD 33 IS 9804: 1981 Synchronous belt drives Belts {Revised and Split in two parts} Alpine ski terminology (Superseded by IS 9317:2001) Gauging practice for line pipe threads used in petroleum industries (withdrawn) Cylindrical pins with internal threads (split in two parts IS 10248 (Part 1): 2011 and IS 10248 (Part 2): 2011) Instruments for measurement of surface roughness by profile method General principles of presentation on technical drawings (Superseded by parts of IS 10714) Methods of tests for slide fasteners (withdrawn) Single point carbide tipped internal threading tools, (IND 3) (55 or 60)[Superseded by IS 13743 (Pt 3):1997] Drawing practice for axonometric projections Part 1 Isometric projection (requirements covered in IS 15021-3: 2001) Drawing practice for axonometric projections Part 2 Dimetric projection (requirements covered in IS 15021-3: 2001) Carbide tipped single point boring tools (arbor mounted type) (IND 4) [Superseded by IS 13743 (Pt 4):1997] Specification for reduction sleeve 7/24 taper to cylindrical [Superseded by IS 11835 (Part 1):2005 & IS 11835(Part 2):2004] Gauging practice for straight sided splines for general engineering use(Superseded by IS 2327:1993) Gauges for straight sided splines for general engineering use Part 1: Plug gauges (Superseded by IS 2327:1993) Gauges for straight sided splines for general engineering use Part 2: Ring gauges (Superseded by IS 2327:1993) Cut-irons and cap-irons or carpenters metal bodied bench 202
124. 125.
PGD 27 PGD 20
IS 9969:1981 IS 9996:1981
126.
PGD 31
IS 10248: 1982
127.
PGD 25
IS 10707:1983
128.
PGD 24
IS 10714:1983
129. 130.
PGD 14 PGD 12
IS 10857:1984 IS 10969:1984
131.
PGD 24
IS 11065(Pt 1): 1984
132.
PGD 24
IS 11065(Pt 2): 1985
133.
PGD 12
IS 11120:1984
134.
PGD 11
IS 11440:1985
135.
PGD 25
IS 11689:1986
136.
PGD 25
IS 11703(Pt 1): 1986
137.
PGD 25
IS 11703(Pt 2): 1986
138.
PGD 06
IS 11832:1986
planes 139. PGD 12 IS 11836:1986 Single point carbide tipped straight round nose turning tool [Superseded by IS 13743 (Pt 7):1997] Single point carbide tipped cranked round nose turning tool [Superseded by IS 13743 (Pt 8):1997] Single point carbide tipped tool blanks for sliding head type automats Part 1: Turning tool (IND 5) [Superseded by IS 13743 (Pt 5):1997] Single point carbide tipped tool blanks for sliding head type automats Part 2: Parting off tool (IND 6) [Superseded by IS 13743 (Pt 6): 1997] Single point carbide tipped tool blanks for sliding head type automats Part 3: Recessing off tool (IND 9) [Superseded by IS 13743 (Pt 9): 1997] ISO general purpose metric screw threads Selected sizes for screws, bolts and nuts [Superseded by IS 4218(Pt 4):2001] Carbide tips for parting off and turning tool (IND 5 & 6) for sliding head type automats [Superseded by IS 13741(Pt 3):1993] Bevel gear systems Part 1: Straight bevel gears Bevel gear systems Part 2: Spiral bevel gears Bevel gear systems Part 3:Zerol bevel gears Guidelines for technical evaluation of general purpose parallel lathes (Superseded by IS 11118) Simplified presentation of technical documents Part 1 Guide for preparation of supplementary drawings Data sheet for pneumatic tools test report: Part 1 Rotary tools(superseded by IS 12563: 2001) Data sheet for pneumatic tools test report: Part 2 Percussive tool (with or without rotation) (superseded by IS 12563: 2001) Legal Metrology Gas volume meters Part 3 Rotary piston and turbine gas meters (Replaced by IS 15673: 2006 and IS 15676: 2006 & withdrawal of base standard OIML 203
140.
PGD 12
IS 11837:1986
141.
PGD 12
IS 11878(Pt 1):1986
142.
PGD 12
IS 11878(Pt 2):1986
143.
PGD 12
IS 11878(Pt 3):1987
144.
PGD 20
IS 12241:1987
145.
PGD 12
IS 12294:1988
146. 147. 148. 149.
PGD 30 PGD 30 PGD 30 PGD 03
IS 12328(Pt 1): 1988 IS 12328(Pt 2):1988 IS 12328(Pt 3):1988 IS 12454:1988
150.
PGD 24
IS 12461(PT 1): 1988
151.
PGD 08
IS 12563 : Part 1 : 1988 IS 12563 : Part 1 : 1988
152.
PGD 08
153.
PGD 26
IS 14439(Pt 3):1998
R 32) 154. PGD 16 IS 14645:1998 Fluid power systems and components Cylinders Nominal pressure (obsolete & also ISO 3322: 1985 from which assistance was derived stands withdrawn) Computer-Aided Design (CAD) Technique Use of computers for the preparation of construction drawings (Base standard withdrawn) Manipulating industrial robots Graphical user interfaces for programming and operation of robots (GUI-R) (base standards i.e ISO 15187: 2000 was withdrawn) Abrasive grains Determination of Capillarity (base standards i.e ISO 9137: 1990 was withdrawn) Handbook on industrial fasteners Part 1: General engineering standards Handbook on industrial fasteners Part 2: Bolts, nuts, screws and other threaded fasteners and washers Handbook on industrial fasteners Part 3: Rivets, pins, nails, keys and keyways, cotters and other non-threaded fasteners Hand operated hand tools Safety cod for the use, care and protection
155.
PGD 24
IS 15057:2001 /ISO/TR 10127:1990
156.
PGD 18
IS 15292:2003 /ISO 15187:2000
157.
PGD 09
IS 15425: 2004
158.
PGD 31
SP 29(Pt 1): 1985
159.
PGD 31
SP 29(Pt 2): 1987
160.
PGD 31
SP 29(Pt 3): 1987
161.
PGD 05
SP 53:1992
204
PRODUCTION AND GENERAL ENGINEERING DEPARTMENT ANNEX B LIST OF IS NO. AND VALID LICENCES COVERED UNDER CERTIFICATION AS ON 01 OCTOBER 2010 Sl. No. 1. IS No. Product Committee No. No. of Licences 2
274(Pts 1and 2):1981 1363(Pt 1):2002
Specification for Shovels - Part 1 : General Purpose Shovels Hexagon Head Bolts, Screws and Nuts of Product Grade `C' - Part 1 : Hexagon Head Bolts (Size Range M 5 to M 64) Hexagon Head Bolts, Screws and Nuts of Product Grades A and B - Part 1 : Hexagon Head Bolts (Size Range M 1.6 to M 64) Transmission belting - Friction surface rubber belting - Specification Specification for Powrahs Conveyor and elevator textile belting Specification: Part 5 Fire resistant belting for surface application Hot forged steel rivets for hot closing (12 to 36mm diameter) Open Jaw Wrenches (Spanners) - Specification Ring wrenches (Spanners) Coolant pumps for general purpose machine tools - Specification Specification for Drill Chucks Hexagon socket head cap screws Short Pitch Transmission Precision Roller Chains and Chain Wheels V-Belts - Endless V-Belts for Industrial Purposes - Part 1 : General Purpose 205
PGD 34
2.
PGD 31
21
3.
1364(Pt 1):2002
PGD 31
4.
1370:1993
PGD 29
5. 6.
1759:1986 1891(Pt 5):1993
PGD 06 PGD 33
5 1
PGD 31 7. 1929:1982 1
8. 9. 10.
2028:2004 2029:1998 2161:1996
4 3 2
11. 12. 13.
2243:1971 2269:2002 2403:1991
2 1 4
14.
2494(Pt 1):1994
PGD 33
34
Specification 15. 3099(Pts 1&2): Microscopes Slips and slides Specification: Part 1 Microscope slips; Part 2 Microscope slides (first revision) Slide fasteners (general purpose) Specification for Combination Side Cutting Pliers Specification for Pipe Wrenches - Part 1 : General Purpose Specification for Pipe Wrenches - Part 2 : Heavy Duty Specification for Chain Pipe Wrenches Open ended slugging wrenches (Spanners) Specification (first revision) Ring slugging wrenches (Spanners) Specification (first revision) Specification for Twist Drills, Morse Taper Shanks Multiple slip-joint pliers Specification for Single-ended Open-jaw Adjustable Wrenches Specification for Hexagon Bolts for Steel Structures Specification for Slotted Countersunk Head Wood Screws Fasteners for consumer goods Synthetic hook and loop tape - Specification Specification for Tapered Roller Bearings Fasteners - Threaded Steel Fasteners - Hexagon Head Transmission Tower Bolts - Specification Total PGD 22 9
16. 17.
3148:1991 3650:1981
PGD 14 PGD 34
1 3
18.
4003(Pt 1):1978
PGD 34
19.
4003(Pt 2):1978
PGD 34
20. 21.
4123:1982 4508:1992
PGD 34 PGD 34
3 1
22.
IS 4509:1992
PGD 34
23.
5103:1969
PGD 32
24. 25.
6118:1991 6149:1984
PGD 34 PGD 34
1 3
26.
6639:1972
PGD 31
27.
6760:1972
PGD 31
28.
8156:1994
PGD 14
29. 30.
12102:1987 12427:2001
PGD 13 PGD 31
1 19
147
206
PRODUCTION AND GENERAL ENGINEERING DEPARTMENT ANNEX C LIST OF BILINGUAL STANDARDS Sl. No. 1. 2. IS No. Title
IS 786:1967 IS 786:1967 (Supplement) IS 844 (Pt 1):1979 IS 3995:1980 IS 7370:1974 IS 15242:2002
Conversion factors and conversion tables (first revision) SI Supplement to Indian Standard Conversion factors and conversion tables (first revision) Screw driver Part 1: Technical supply conditions (second revision)
3.
4. 5. 6.
Mugs (first revision) Razors, safety Magnet (for use in schools and colleges) Specification
207

IS Codes

Uploaded by

Copyright:

Available Formats

IS Codes

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

IS Codes

Uploaded by

Copyright:

Available Formats

PGD

PROGRAMME OF WORK (As on 1 April 2012)

Production & General Engineering Department (PGD)

B U R E A U O F I N DI A N S T A N D A R D S MANAK BHWAN, 9 BAHADUR SHAH ZAFAR MARG New Delhi 110002

BASIC STANDARDS SECTIONAL COMMITTEE

STANDARDS PUBLISHED 1. IS/ISO/IEC Guide 51:2005

IS 1076(PT 1):1985 /ISO 3:1973 IS 1076(PT 2):1985 /ISO 17:1973

REAFFIRM NO.OF AMEND MENTS

IS 1076(PT 3):1985 /ISO 497:1973

**IS 1890(PT 7):1995 /ISO 31-7:1992 IS 1890(PT 8):1995 /ISO 31-8:1992

IS 1890(PT 9):1995 /ISO 31-9:1992

IS 1890(PT 10):1995 /ISO 31-10:1992

IS 1890(PT 11):1995 /ISO 31-11:1992

ISI Handbook of mathematical, physical, chemical and engineering tables

MACHINE TOOL ELEMENTS AND HOLDING DEVICES SECTIONAL COMMITTEE

IS 1995:1984 /ISO 213:1982 IS 2013:1995 |ISO 299:1987 ** ** IS 2014:1996 IS 2015:1977 IS 2161:1996

Aug 2011 Aug 2011 Aug 2011 1

Aug 2011 Aug 2011

Carbide tipped dead centers Specification Feb 2010 (first revision)

SL. No. 11.

NO. OF AMEND MENTS

IS 2582(Pt 1):1987 /ISO 702-1:1975

IS 2582(Pt 2):1987 /ISO 702-2:1975

IS 2582(Pt 3): 1987 /ISO 702-3:1975

14. 15. 16. **

IS 2804:1998 IS 2805:1964 IS 2876:1999

Oct 2008 Aug 2011 Aug 2011

18. 19. 20. 21.

IS 2904:1998 IS 2908:1998 IS 2909:1998 IS 2975:1998

Oct 2008 Dec 2007 Dec 2007 Oct 2008

22. 23. 24.

IS 2990:1986 IS 2995:1988 IS 2996:1986

Aug 2011 Feb 2010 Aug 2011

NO. OF AMEND MENTS 2

29. 30. 31. 32. 33. 34. 35.

IS 3793:1966 IS 4279:1984 IS 4291:1996 IS 4292:1984 IS 4293:1984 IS 4294:1982 IS 4295:1983

Aug 2011 Mar 2010

NO. OF AMEND MENTS

Aug 2011 Oct 2008

NO. OF AMEND MENTS

Dec 2007 Aug 2011

IS 7301:1974 IS 7795: 2004

Aug 2011 Aug 2011

IS 8710:1978 IS 9094(Pt 1): 1979

Aug 2011 Aug 2011

Aug 2011 Aug 2011

72. 73. 74. 75. 76.

IS 10602:1983 IS 10612:1983 IS 10882:1984 IS 11278:1985 IS 11325:1985

NO. OF AMEND MENTS

78. 79. 80. 81. 82. 83. 84.

IS 11614:1986 IS 11831:1986 IS 11843:1986 IS 12242:1987 IS 12250:1987 IS 12280:1988 IS 12281:1988

Feb 2010 Feb 2010

SL. NO. 93.

NO. OF AMEND MENTS

IS 14872(Pt 3):2000 /ISO 3408-3:1992 IS 15246:2002 /ISO 9524:1993

IS 15247:2002 /ISO 9270:1992 IS 15248:2002 /ISO 3442:1991

IS 15249:2002 /ISO 9401:1991

STANDARDS PUBLISHED 1. IS 1878(Pt 1): 1993 |ISO 1708:1989

IS 1878(Pt 2): 1992 |ISO 1708:1989

IS 1995:1984 /ISO 213:1982 IS 2013:1995 |ISO 299:1987 IS 2014:1996 IS 2015:1977 IS 2161:1996