As ISO 7376.3-2002 Laryngoscopic Fittings Fibre-Illuminated Re-Usable Rigid Laryngoscopes

AS ISO 7376.
3—2002
ISO 7376-3:1996
AS ISO 7376.3
Australian Standard™
This is a free 7 page sample. Access the full version at http://infostore.saiglobal.com.
Laryngoscopic fittings
Part 3: Fibre-illuminated re-usable rigid

laryngoscopes
This Australian Standard was prepared by Committee HE-019, Anaesthetic and
breathing equipment. It was approved on behalf of the Council of Standards
Australia on 26 June 2002 and published on 28 June 2002.
The following are represented on Committee HE-019:

Australasian Society of Anaesthesia Technicians
Australian Chamber of Commerce and Industry
Australian College of Operating Room Nurses
Australian Industry Group
Australian Society of Anaesthetists
Australian and New Zealand College of Anaesthetists

Australian and New Zealand Intensive Care Society
College of Biomedical Engineering Institution of Engineers Australia
Commonwealth Department of Health and Ageing
Department of Human Services (South Australia)
Health Department of Western Australia
Medical Industry Association of Australia Inc
NSW Health Department
Keeping Standards up-to-date

Standards are living documents which reflect progress in science, technology and
systems. To maintain their currency, all Standards are periodically reviewed, and
new editions are published. Between editions, amendments may be issued.
Standards may also be withdrawn. It is important that readers assure themselves
they are using a current Standard, which should include any amendments which
may have been published since the Standard was purchased.
Detailed information about Standards can be found by visiting the Standards
Australia web site at www.standards.com.au and looking up the relevant Standard
in the on-line catalogue.
Alternatively, the printed Catalogue provides information current at 1 January each
year, and the monthly magazine, The Australian Standard, has a full listing of
revisions and amendments published each month.
We also welcome suggestions for improvement in our Standards, and especially
encourage readers to notify us immediately of any apparent inaccuracies or
ambiguities. Contact us via email at mail@standards.com.au, or write to the Chief
Executive, Standards Australia International Ltd, GPO Box 5420, Sydney, NSW
2001.
This Standard was issued in draft form for comment as DR 02169.

AS ISO 7376.3—2002
Australian Standard™
Part 3: Fibre-illuminated re-usable rigid

laryngoscopes
First published as AS ISO 7376.3—2002.
COPYRIGHT
© Standards Australia International
All rights are reserved. No part of this work may be reproduced or copied in any form or by any
means, electronic or mechanical, including photocopying, without the written permission of the
publisher.
Published by Standards Australia International Ltd
GPO Box 5420, Sydney, NSW 2001, Australia
ISBN 0 7337 4687 X
ii
PREFACE
This Standard has been developed to assist in the process of implementation of the
Australian Medical Device legislation.
After consultation with stakeholders in both countries, Standards Australia and Standards
New Zealand decided to develop this Standard as an Australian, rather than an
Australian/New Zealand Standard, through the Joint Standards Australia/Standards
New Zealand Committee HE-019 on Anaesthetic and breathing equipment.
This Standard is identical with and has been reproduced from ISO 7376-3:1996,
Laryngoscopic fittings — Part 3: Fibre-illuminated re-usable rigid laryngoscopes.
The objective of this Standard is to specify basic dimensions and performance requirements
for two designs of hook-on type fibre-illuminated re-usable rigid laryngoscopes.
As this Standard is reproduced from an international Standard, the following applies:

(a) Its number does not appear on each page of text and its identity is shown only on the
cover and title page.
(b) In the source text ‘this International Standard’ should read ‘this Australian Standard’.
(c) A full point substitutes for a comma when referring to a decimal marker.
iii
INTRODUCTION
iv
NOTES
1
AUSTRALIAN STANDARD
Part 3: Fibre-illuminated re-usable rigid laryngoscopes

www.standards.com.au  Standards Australia

This is a free preview. Purchase the entire publication at the link below:
AS ISO 7376.3-2002, Laryngoscopic fittings

Fibre-illuminated re-usable rigid laryngoscopes
Looking for additional Standards? Visit SAI Global Infostore

Subscribe to our Free Newsletters about Australian Standards® in Legislation; ISO, IEC, BSI and more
Do you need to Manage Standards Collections Online?
Learn about LexConnect, All Jurisdictions, Standards referenced in Australian legislation
Do you want to know when a Standard has changed?
Want to become an SAI Global Standards Sales Affiliate?
Learn about other SAI Global Services:
LOGICOM Military Parts and Supplier Database

Metals Infobase Database of Metal Grades, Standards and Manufacturers
Materials Infobase Database of Materials, Standards and Suppliers
Database of European Law, CELEX and Court Decisions
Need to speak with a Customer Service Representative - Contact Us

As ISO 7376.3-2002 Laryngoscopic Fittings Fibre-Illuminated Re-Usable Rigid Laryngoscopes

Uploaded by

Copyright:

Available Formats

As ISO 7376.3-2002 Laryngoscopic Fittings Fibre-Illuminated Re-Usable Rigid Laryngoscopes

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

As ISO 7376.3-2002 Laryngoscopic Fittings Fibre-Illuminated Re-Usable Rigid Laryngoscopes

Uploaded by

Copyright:

Available Formats

AS ISO 7376.

Part 3: Fibre-illuminated re-usable rigid

The following are represented on Committee HE-019:

Australian and New Zealand College of Anaesthetists

Keeping Standards up-to-date

This Standard was issued in draft form for comment as DR 02169.

Part 3: Fibre-illuminated re-usable rigid

First published as AS ISO 7376.3—2002.

As this Standard is reproduced from an international Standard, the following applies:

Part 3: Fibre-illuminated re-usable rigid laryngoscopes

www.standards.com.au  Standards Australia

AS ISO 7376.3-2002, Laryngoscopic fittings

Looking for additional Standards? Visit SAI Global Infostore

Learn about other SAI Global Services:

LOGICOM Military Parts and Supplier Database

Need to speak with a Customer Service Representative - Contact Us

You might also like