This document provides specifications for different models of dipole antennas, including the PLS 1, DIP 11, and DIP 15. The dipoles are designed for use in arrays and are made of corrosion-resistant materials. They have SWR of less than 1.4:1 and can withstand wind speeds up to 150 km/h. Electrical data, mechanical characteristics, gain, power handling capabilities, and dimensions are listed for each antenna model. Mounting options and radiation patterns are also included.
This document provides specifications for different models of dipole antennas, including the PLS 1, DIP 11, and DIP 15. The dipoles are designed for use in arrays and are made of corrosion-resistant materials. They have SWR of less than 1.4:1 and can withstand wind speeds up to 150 km/h. Electrical data, mechanical characteristics, gain, power handling capabilities, and dimensions are listed for each antenna model. Mounting options and radiation patterns are also included.
This document provides specifications for different models of dipole antennas, including the PLS 1, DIP 11, and DIP 15. The dipoles are designed for use in arrays and are made of corrosion-resistant materials. They have SWR of less than 1.4:1 and can withstand wind speeds up to 150 km/h. Electrical data, mechanical characteristics, gain, power handling capabilities, and dimensions are listed for each antenna model. Mounting options and radiation patterns are also included.
This document provides specifications for different models of dipole antennas, including the PLS 1, DIP 11, and DIP 15. The dipoles are designed for use in arrays and are made of corrosion-resistant materials. They have SWR of less than 1.4:1 and can withstand wind speeds up to 150 km/h. Electrical data, mechanical characteristics, gain, power handling capabilities, and dimensions are listed for each antenna model. Mounting options and radiation patterns are also included.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1/ 2
F M
D I P O L E
A N T E N N A S
Mod. PLS 1 DIP 11 DIP 15
There are a very strong wide band antennas, designed specially for arrays composed of many elements. The dipole is made of stainless steel, ensuring high corrosion resistance. A heavy internal ground across the feed line protects against lightning damage. The internal lines and the PTFE insulator assure reliability for power ratings up to 1500 W on the DIP 11 and up to 5000 W on the DIP 15. The dipole PLS 1 is a good economic solution. Complete factory testing is carried out on each dipole to achieve the stated performance and peak efficiency.
Mod. DIP 11
Mod. DIP 15
F033.01 F204 F204.01 F204.02 F202.01 F202
PLS1 DIP11/N DIP11/16 DIP11/F DIP15/16 DIP15/F
Aluminium Dipole, 600W Power rate Galvanized steel Dipole, 600W Power rate Galvanized steel Dipole, 1.5KW Power rate Galvanized steel Dipole, 1.5KW Power rate Galvanized steel Dipole, 2KW Power rate Galvanized steel Dipole, 5KW Power rate
64
Technical data FM Dipole Antennas
ELECTRICAL AND MECHANICAL DATA TYPE FREQUENCY RANGE INPUT CONNECTOR BANDWIDTH IMPEDANCE POWER RATING SWR POLARIZATION GAIN H PLANE V PLANE LIGHTNING PROTECTION MAX WIND VELOCITY WIND LOAD (With speed at 150 Km/h) WIND SURFACE MATERIALS INTERNAL PARTS EXTERNAL PARTS EXTERNAL INSULATOR BRACKETS BOLTS AND SCREWS CONNECTORS RUBBERCASING MOUNTING WEIGHT DIMENSION (cm.) PACKING (cm.) Dipole PLS 11 Dipole DIP 11 87,5 108 MHz N N - 7/16 - 7/8 87,5 108 MHz 50 500 W 1500 W 1.4:1 Vertical 2 dB (Referred to Half - Wave Dipole) 180 78 All metal parts are DC Grounded 150 Km/h 10 Kgs. 18 Kgs. 0,11 SQM. 0,11 SQM Dipole DIP 15 7/16 - 7/8
5000 W
25 Kgs. 0,18 SQM
Specifications and characteristics are subject to change without notice.
Silver-plated brass and PTFE Aluminium PVC Hot Galvanized steel Galvanized steel No From 60 to 120 mm. . 4 Kg. 140x85x6 145x90x10
