DOGS GRAPHIC SERIES

102x64 DOTS
fla availa t: b 5.5 le in mm wit low qu hL a ED ntiti e b./ l. s ! mou nte d

05.2011

EA DOGS102B-6 + EA LED39x41-W

EA DOGS102W-6 + EA LED39x41-W EA DOGS102W-6 + EA LED39x41-A

TECHNICAL DATA
* * * * * * * * * HIGH-CONTRAST LCD SUPERTWIST DISPLAY (STN AND FSTN) WITH 10m DOT GAP OPTIONAL LED BACKLIGHTS IN VARIOUS COLORS 102x64 PIXELS (CORRESPONDS TO 8x17 CHARACTERS OR 4x12 LARGE CHARACTERS) UC1701 CONTROLLER WITH SPI (4-WIRE) INTERFACE POWER SUPPLY: SINGLE SUPPLY 2.5V TO 3.3V (TYPICALLY 250A) NO ADDITIONAL VOLTAGES REQUIRED OPERATING TEMPERATURE RANGE -20C TO +70C (STORAGE -30C TO +80C) LED BACKLIGHTING 5mA TO 80mA NO MOUNTING REQUIRED: SIMPLY SOLDER ONTO PCB

ORDERING CODE
GRAPHICS DISPLAY, 102x64, 39x41mm
x: W = white background (FSTN pos. transflective) B = blue background (STN neg. transmissive) N = superwhite background (FSTN pos. reflective, cannot be backlit)

EA DOGS102x-6

LED BACKLIGHT, WHITE LED BACKLIGHT, AMBER LED BACKLIGHT, DUO COLOR GREEN/RED

EA LED39X41-W EA LED39X41-A EA LED39X41-GR

ACCESSORIES
USB TEST BOARD FOR PC (WINDOWS 2000, XP, VISTA) TOUCH PANEL, 4-WIRE, ANALOG, STICK-ON ZIF CONNECTOR FOR TOUCH PANEL, BOTTOM CONTACT 10 CHARACTER SETS e.g. 6x8,8x8,8x16,CYRILLIC, FONT EDITOR SOCKET 4.8mm HEIGHT (2 pcs. ARE NECCESSARY) EA EA EA EA EA 9780-2USB TOUCH102-1 WF100-04S USBSTICK-FONT FL-14P

Zeppelinstrasse 19 D-82205 Gilching Phone +49-(0)8105-778090 Fax: +49-(0)8105-778099 www.lcd-module.de info@lcd-module.de

EA DOGS102-6
Page 2

ELECTRONIC ASSEMBLY reserves the right to change specifications without prior notice. Printing and typographical errors reserved.

PINOUT The EA DOGS102, a 102x64-pixel graphics display, is a new addition to ELECTRONICASSEMBLYs EA DOG series. It, too, has pins that allow it to be mounted quickly and easily.
Pin Symbol Level Function
1 2 3 4 5 6 7 8 9 10 11 12 13 14 NC NC (C2-: LED backlight) (A2+: LED backlight) NC NC (A1+: LED backlight) (C1-: LED backlight)

Pin Symbol Level Function

CONTRAST ADJUSTMENT The contrast can be set by means of a command for all the displays in the EA DOG series. The contrast setting of the display must be set once by the software, and is then kept constant throughout the entire operating temperature range (-20..+70C), thanks to the integrated temperature compensation. 3 DIFFERENT TECHNOLOGIES See below for an overview of available technologies, combinations with available backlights and their usability:
display type technology optional backlight readability display color non backlighted display color with backlighted recommende backlight color

FSTN pos. transflective

it's fine with and without readable even backlight without backlight

black on white

black on backlight color

all

STN neg. blue transmissive

usage only with backlight

---

---

white backlight on blue background

white

FSTN pos. white reflective

no backlight possible

finest readable without backlight

black on white

---

---

ELECTRONIC ASSEMBLY reserves the right to change specifications without prior notice. Printing and typographical errors reserved.

EA DOGS102-6
Page 3

LED-BACKLIGHT 3 different variants are available for individual backlighting: white, amber and a duo-color green/ren version. There are 2 separate LED paths available for each monochrome backlight that can be switched in parallel or in series to suit the system voltage. This means that most backlights can be run at either 3.3 V or a higher voltage. To operate the backlight, we recommend a current source (e.g. CAT4238TD) or an external series resistor to limit the current. This can be calculated from R=U/I; you can find the values in the table on the right. To prolong the life of the backlights, we recommend that you use a current source. The operating life of the amber and green/red backlights is 100,000 hours. The life of the white backlight is considerably shorter. We recommend that you dim these or switch them off whenever possible. Important: Never connect the backlight LEDs directly to a 5 V/3.3 V supply as this will immediately destroy the LEDs.Always use a current source. Please note that derating applies at temperatures exceeding +25C.

amber EA LED39x41-A Connected in parallel Connected in series

Forward voltage 2,2 V 4,4 V

Current max. 80 mA 40 mA

Limiting resistor @ 3,3 V 15 ohm

@5V 36 ohm 15 ohm

white EA LED39x41-W Connected in parallel Connected in series

Forward voltage 3,3 V 6,6 V

Current max. 60 mA 30 mA

Limiting resistor @ 3,3 V 0 ohm @5V 28 ohm

use CAT4238

green/red EA LED39x41-GR red path (ARG/CR) green path (ARG/CG)

Forward voltage 1,9 V 2,0 V

Current max. 60 mA 80 mA

Limiting resistor @ 3,3 V 24 ohm 18 ohm @5V 51 ohm 39 ohm

EA LED39x41-A Amber

EA LED39x41-W White

EA LED39x41-GR Green/Red

If you see black and white pictures on this page but you want to see the colors of the displays, you can download a fullcolored version of this document at http://www.lcd-module.de/eng/pdf/grafik/dogs102-6e.pdf

EA DOGS102-6
Page 4

ELECTRONIC ASSEMBLY reserves the right to change specifications without prior notice. Printing and typographical errors reserved.

APPLICATION EXAMPLE 3 additional capacitors are required for +2,5V..+3.3V operation. Current consumption typ. 250A

DATA TRANSFER Data transfer is unidirectional. That means that data can only be written; it cannot be read again. In contrast to other displays, a busy query is not necessary with this display. The transmission follows SPI-mode 3, with MSB first. The clock-pulse rate of the SCL line can be up to 33 MHz at 3.3V, depending on the supply voltage. You will find more detailed information on timing on page 41 of the datasheet of the UC1701x controller, which you will find on our website at http://www.lcd-module.de/eng/pdf/zubehoer/uc1701.pdf

ELECTRONIC ASSEMBLY reserves the right to change specifications without prior notice. Printing and typographical errors reserved.

EA DOGS102-6
Page 5

UC1701 PROGRAMMING COMMANDS

Command
CD D7 D6 D5 D4 D3 D2 D1 D0

Function
1 0 0 0 0 0 0 0 0 0 1 0 1 0 0 1 0 0 0 0 0 0 0 0 1 1 0 1 0 1 1 1 1 0 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 0 1 0 0 0 0 0 0 1 1 0 1 SL[5..0] PA[3..0] PC[5..3] 0 1 CA[7..4] PC[2..0] 0 0 data bit D[7..0] 0 CA[3..0]

(1) (4)

Write Data Byte Set Column Address LSB Set Column Address MSB Set Power Control Set Scroll Line Set Page Address Set VLCD Resistor Ratio Set Electronic Volume

Write one byte to memory Set the SRAM column address CA=0..131 PC0: 0=Booster OFF; 1=Booster ON PC1: 0=Regulator OFF; 1=Regulator ON PC2: 0=Follower OFF; 1=Follower ON Set the display startline number SL=0..63 Set the SRAM page address PA=0..7 Configure internal resistor ratio PC=0..7 Adjust contrast of LCD panel PM=0..63

(5) (6) (7) (8) (9)

0 0 0 0 0 0 0 0 0 0 TC 0 0 1 1 1 1 1 1 1 1 PM[5..0] 0 0 1 0 MY 0 0 1 1 1 1 0 0 0 0 0 0 1 1 0 0 1 1 1 C1

(10) Set All Pixel On (11) Set Inverse Display (12) Set Display Enable (13) Set SEG direction (14) Set COM direction (15) System Reset (17) Set LCD Bias Ratio (25) Set Adv. Program Control 0

C1=0: show SRAM content C1=1: Set all SEG-Drivers to ON C0=0: show normal SRAM content C0 C0=1: show inverse SRAM content C2=0: disable Display (sleep) C2 C2=1: enable Display (exit from sleep) MX=0: normal SEG 0..131 MX MX=1: mirror SEG 131..0 MY=0: normal COM 0..63 0 MY=1: mirror COM 63..0
0 BR 0

System Reset BR: 0=1/9; 1=1/7

TC: Temp. comp. 0= -0.05; 1= -0,11%/C WC: Column wrap around 0=0FF; 1=ON WC WP WP: Page wrap around 0=0FF; 1=ON

CHARACTER SET AND FONT EDITOR (ACCESSORY) With the ordering code EA USBSTICK-FONT a memory stick comes with various character sets, especially made for this small display EA DOGS102-6.An import function allows additionally to useWindows fonts.With the FontEditor it is easy to generate for example Cyrillic, Greek and Arabic fonts. The preview function shows immediately the size and style in simulation window. When the testboard EA 9780-2USB is connected to the USB port, you can see the character (or any predefined text) live on the display ! No need to say that the export function generates a C- and Basic source code as an include file to your software.

EA DOGS102-6
Page 6

ELECTRONIC ASSEMBLY reserves the right to change specifications without prior notice. Printing and typographical errors reserved.

INITIALISATION EXAMPLE
Initialisation example (bottom view)
Command (6) Set Scroll Line (13) Set SEG direction (14) Set COM direction (10) Set All Pixel On (11) Set Inverse Display (17) Set LCD Bias Ratio (5) Set Power Control (8) Set VLCD Resistor Ratio (9) Set Electronic Volume
CD D7 D6 D5 D4 D3 D2 D1 D0 Hex

Remark Display start line 0

0 0 0 0 0 0 0 0 0

0 1 1 1 1 1 0 0 1 0 1

1 0 1 0 0 0 0 0 0 0 1 0 0

0 1 0 1 1 1 1 1 0 0 1 0 1

0 0 0 0 0 0 0 0 0 1 1 1 0

0 0 0 0 0 0 1 0 0 0 1 0 1

0 0 0 1 1 0 1 1 0 0 0 0 1

0 0 0 0 1 1 1 1 0 0 1 0 1

0 1 0 0 0 0 1 1 1 0 0 0 1

$40

$A1 SEG reverse *) $C0 Normal COM0~COM63 $A4 Disable -> Set All Pixel to ON $A6 Display inverse off $A2 Set Bias 1/9 (Duty 1/65) $2F Booster, Regulator and Follower on $27 $81 $10 $FA Set Temperature compensation $90 curve to -0.11%/C $AF Display on Set Contrast

(25) Set Adv. Program Control 0 (12) Set Display Enable

0 1 0 1

*) Make sure that for 6:00 viewing direction SEG has to be set to reverse (mirrored layout) !

12:00 VIEWING ANGLE, TOP VIEW OPTION If the display is read mostly from above (on the front of a laboratory power supply unit, for example), the preferred angle of viewing can be set to 12 oclock. This rotaties the display by 180. A slightly different initialization setup is required for this. Also keep in mind that the leftmost column (normally numbered as 0) will now change to 30.
Initialisation example (changes for top view)
Command (13) Set SEG direction (14) Set COM direction
CD D7 D6 D5 D4 D3 D2 D1 D0 Hex

Remark

0 0

1 1

0 1

1 0

0 0

0 1

0 0

0 0

0 0

$A0 SEG normal $C8 COM reverse COM63~COM0

Orientation for 6 oclock (Bottom View)

Orientation for 12 oclock (Top View)

ELECTRONIC ASSEMBLY reserves the right to change specifications without prior notice. Printing and typographical errors reserved.

EA DOGS102-6
Page 7

USB-TEST BOARD EA 9780-2USB For easy startup, a USB test board is available that can be connected to a PC.A USB cable and Windows software is supplied with the product. This allows text and images (BMP) to displayed directly on the connected display. You will find more information on the test board in the EA 9780-2USB data sheet. SIMULATION WITH WINDOWS A simulator window also displays the contents of the display. The software can simulate all the displays and colors even without the hardware. You can download the software free from our website. Note that all functions of the simulation software do run also without the USB board. http://www.lcd-module.de/deu/disk/startdog20.zip

TOUCH PANEL EA TOUCH102-1 (OPTIONAL) An analog touch panel is available as an accessory. It has a self-adhesive material on its rear surface and is simply stuck onto the display. The connection is made by means of a 4-pin flexible cable for a ZIF connector (e.g. EA WF100-04S) with a grid of 1.0 mm. Bending radius is defined Specification with min. 5mm. For optimum readability we Specification min max Unit recommend that you use a backlight with the Top-Bottom t.b.d. t.b.d. display. Left-Right t.b.d. t.b.d. Interfacing to a processor can be either done by Voltage 3 12 V an external touch panel Current 5 25 mA controller or with a controller Linearity 1,5 % that is featured with analogue Force 45 65 g input. The touch panel is Contact Bounce 5 10 ms similar to a potentiometer: Op. Temperatur -20 +60 C connecting a voltage of e.g. Stor. Temperatur -20 +70 C 3.3V to the pins Top-Bottom Transmission 75 85 % makes it possible to read out Life Time 100000 Cycles a voltage on pin Left or Right which is linear to the Y-coordinate of the pressed point. The Xcoordinate will result when the voltage will be supplied to Left-Right and measurement is done at Top or Bottom. The pinout of the connecting cable is shown in the drawing.

ZIF CONNECTOR EA WF100-04S As an accessory for the touch panel we do provide a ZIF connector (4 pins) with pitch 1.0mm (SMD type). This connector is a bottom side contact type.

alle dimensions are in mm

EA DOGS102-6
Page 8

ELECTRONIC ASSEMBLY reserves the right to change specifications without prior notice. Printing and typographical errors reserved.

DIMENSIONS EA DOGS102-6

DIMENSIONS EA LED39X41

all dimensions are in mm

ATTENTION

handling precautions!

MOUNTING / ASSEMBLING First, clip the display and backlight modules together by gently pushing the display pins through the corresponding holes on the backlight module. Then insert the entire module into the socket, or into the soldering holes on the pcb. The backlight pins (4 pins at the bottom) must be soldered on the top side as well to ensure good contact between the modules. Important: - The display and the backlight do have in summary 3 protective films. There are some on the top and the bottom of the display and also one on the backlight. These must be removed. - LC displays are generally not suited for wave or reflow soldering. Temperatures of over 80C can cause lasting damage. - Make sure that either display nor backlight will never come into contact with any kind of liquid like Fluxer, Cleaner, Water.

Zeppelinstrasse 19 D-82205 Gilching Phone +49-(0)8105-778090 Fax: +49-(0)8105-778099 www.lcd-module.de info@lcd-module.de