Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 123 views

    LCD 2 X 8

    Uploaded by

    dek_war
    The document provides information about an LCD-Modul 2x8 display module that is 5.01mm with an included ST7066 controller. It has dimensions of 40 x 20 mm. The module has features such as a super small size, high contrast LCD display, optional yellow/green LED backlight, and compatibility with the HD44780 driver. It includes pinout details and initialization instructions for a 2 line display in 8-bit mode.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    LCD 2 X 8

    Uploaded by

    dek_war
    123 views4 pages
    The document provides information about an LCD-Modul 2x8 display module that is 5.01mm with an included ST7066 controller. It has dimensions of 40 x 20 mm. The module has features such as a super small size, high contrast LCD display, optional yellow/green LED backlight, and compatibility with the HD44780 driver. It includes pinout details and initialization instructions for a 2 line display in 8-bit mode.

    Original Title

    lcd2x8

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides information about an LCD-Modul 2x8 display module that is 5.01mm with an included ST7066 controller. It has dimensions of 40 x 20 mm. The module has features such as a super small size, high contrast LCD display, optional yellow/green LED backlight, and compatibility with the HD44780 driver. It includes pinout details and initialization instructions for a 2 line display in 8-bit mode.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    123 views4 pages

    LCD 2 X 8

    Uploaded by

    dek_war
    The document provides information about an LCD-Modul 2x8 display module that is 5.01mm with an included ST7066 controller. It has dimensions of 40 x 20 mm. The module has features such as a super small size, high contrast LCD display, optional yellow/green LED backlight, and compatibility with the HD44780 driver. It includes pinout details and initialization instructions for a 2 line display in 8-bit mode.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    Issue 6.

    2012

    LCD-Modul 2x8 - 5.01mm


    INCL. CONTROLLER ST7066

    ng nti ou e m red mor qui no re

    Dimension 40 x 20 mm

    FEATURES
    * * * * * * * * * * * SUPER SMALL LCD MODULE HIGH CONTRAST LCD-SUPERTWIST DISPLAY (BLUE/NEUTRAL) OPTIONAL LED-BACKLIGHT YELLOW/GREEN HD 44780 COMPATIBLE 4- OR 8-BIT DATA BUS INTERFACE ASCII CHARACTER SET BUILT IN ALSO AVAILABLE: 1x8 LCD WITH SAME DIMENSIONS POWER SUPPLY +5V OR 2.7V OR 3.3V @2mA and 50mA for LED-B/L (5V) OPERATING TEMPERATURE RANGE EA DIPS082: -20+70C OPERATING TEMPERATURE RANGE EA 8081-A3N: 0+50C NO MORE MOUNTING REQUIRED: SIMPLY PLUG INTO PCB

    ORDERING INFORMATION
    LCD-MODULE 2x8 - 5.01mm WITH LED BACKLIGHT YELLOW/GREEN LCD-MODULE 1x8 - 7.15 mm EA DIPS082-HN EA DIPS082-HNLED EA 8081-A3N

    2x8 - 5.01mm
    Pinout
    Pin Symbol Level Function
    1 2 3 4 5 6 7 VSS VDD VEE RS R/W E D0 L H H/L H/L H H/L Power Supply 0V (GND) Power Supply +5V Contrast (about 0.3V / 1.2V) H=Data / L=Command H=Read / L=Write Enable (falling edge) Display Data / Anode LED-B/L

    Pin
    8 9 10 11 12 13 14

    Symbol Level Function


    D1 D2 D3 D4 (D0) D5 (D1) D6 (D2) D7 (D3) H/L H/L H/L H/L H/L H/L H/L Display Data Display Data Display Data Display Data Display Data Display Data Display Data, MSB

    LED Backlight Standard display EA DIPS082-HN is reflective, non-backlighted version. Module with part number EA DIPS082-HNLED comes with yellow/green LED backlight. Power consumption for backlight is 50mA typ. and 80mA max. Backlight is permanent switched on. For individual use LED backlight can be switched on and off after doing the following modification: Remove series resistor R5 and change resistor from R6 to R7. Now a positive voltage at pin 7 (D0) powers Anode of backlight direct. To limit LED-current an external series resistor is required (RExt.= 0,8V / ILED). Please note that in this case display interface is 4-bit mode only ! Table of commands
    Code Instruction Clear Display
    DB DB DB DB DB DB DB DB RS R/W 7 6 5 4 3 2 1 0

    Description
    Clears all display and returns the cursor Returns the Cursor to the home position (Address 0). Also returns the display being shifted to the original position. DD RAM contents remain unchanged.

    Execute Time (max.) 1.64ms

    1 to the home position (Address 0).

    Cursor At Home

    1.64ms

    Entry Mode Set

    1 I/D

    Display On/Off Control

    0 0 0

    0 0 0

    0 0 0

    0 0 1

    Sets the Cursor move direction and specifies or not to shift the display. S These operation are performed during data write and read. Sets ON/OFF of all display (D) cursor B ON/OFF (C), and blink of cursor position character (B).

    40s

    40s 40s 40s

    Cursor / Display Shift 0 Function Set 0

    1 S/C R/L * DL N F *

    Moves the Cursor and shifts the display without changing DD RAM contents. Sets interface data length (DL) number

    * of display lines (N) and character font


    (F). Sets the CG RAM address. CG RAM data is sent and received after this setting. Sets the DD RAM address. DD RAM data is sent and received after this setting. Reads Busy flag (BF) indicating internal operation is being performed and reads address counter contents. Writes data into DD RAM or CG RAM Reads data from DD RAM or CG RAM

    CG RAM Address Set 0

    ACG

    40s

    DD RAM Address Set 0 Busy Flag / Address Read CG RAM / DD RAM Data write CG RAM / DD RAM Data Read

    ADD

    40s

    0 1 1

    1 0 1

    BF

    AC Write Data Read Data

    40s 40s

    Page 2

    Printing and typographical errors reserved. ELECTRONIC ASSEMBLY reserves the right to change specifications without prior notice.

    2x8 - 5.01mm
    Character set Below shown character set is already built in. Additionally 8 self defined characters can be attached.

    CREATING YOUR OWN CHARACTERS


    All character display modules offered in this catalogue, are able to create 8 own characters (ASCII Codes 0..7) in addition to the 192 ROM fixed codes. 1.) The command "CG RAM Address Set" defines the ASCII code (Bit 3,4,5) and the dot line (Bit 0,1,2) of the new character. Example demonstrates creating ASCII code $00. 2.) Doing 8 times the write command "Data Write" defines line by line the new character. 8th. byte stands for the cursor line. 3.) The new defined character can be used as a "normal" ASCII code (0..7); use with "DD RAM Address Set" and "Data Write".
    Adresse im CG RAM setzen Adresse 0 0 0 0 0 1 0 1 0 0 1 0 0 0 0 1 1 1 0 0 1 0 1 1 1 0 1 1 1 Hex $40 $41 $42 $43 $44 $45 $46 $47 X X X Daten des Zeichens Bit 7 6 5 4 3 2 1 0 0 0 1 0 0 0 0 1 0 0 0 0 1 0 0 0 0 1 0 0 1 0 1 0 1 0 1 1 1 0 0 0 1 0 0 0 0 0 0 0 Hex $04 $04 $04 $04 $15 $0E $04 $00

    INITIALISATION FOR A 2 LINE DISPLAY / 8-BIT MODE


    Command
    Function Set Display ON/OFF Clear Display Entry Mode Set
    RS 0 0 0 0 R/ 0 0 0 0 DB DB DB DB DB DB DB DB 0 0 0 0 0 0 0 0 1 0 0 0 1 0 0 0 1 1 0 0 0 1 0 1 0 1 0 1 0 1 1 0

    Remark
    8-Bit Data Length, 2/4 lines, 5x7 Font Display on, Cursor visible, Cursor blink Clear Display, Cursor Home Cursor Auto-Increment

    Printing and typographical errors reserved. ELECTRONIC ASSEMBLY reserves the right to change specifications without prior notice.

    Page 3

    2x8 - 5.01mm
    Dimensions

    Technische nderung vorbehalten. Wir bernehmen keine Haftung fr Druckfehler und Applikationsbeispiele.

    all dimensions are in mm

    ATTENTION

    handling precautions!

    Delivery state Intern, LED permanent on

    Extern, LED controllable, only possible in 4-bit mode

    1-line Display EA 8081-A3N

    ELECTRONIC ASSEMBLY GmbH Zeppelinstrae 19 D-82205 Gilching Germany

    Fon: Fax: e-Mail: Web:

    +49 (0)8105-77 80 90 +49 (0)8105-77 80 99 info@lcd-module.de www.lcd-module.com

    You might also like