VBelt
VBelt
VBelt
Quality
is the result of design fuelled by intent.
Technical Manual
for V-Belt Drives
This manual contains all the important technical information and methods required for
calculating drives using Optibelt V-belts and pulleys in industrial applications.
The following drive elements from Optibelts comprehensive range are described in
detail:
optibelt SK
optibelt VB
Classical V-belts
optibelt KB
optibelt KBX
optibelt SUPER VX
optibelt DK
optibelt PKR
optibelt KK
Plastic V-belting
optibelt RR
optibelt KS
V-grooved pulleys
optibelt RE
optibelt TB
Taper bushes
Our engineers from the Applications Engineering Dept. will be pleased to provide
advice free of charge on the use of these types of drives and to assist in designing to
your specific requirements.
Especially with large-scale series you should by no means renounce our service. Using
state-of-the-art programmes, CAP-drive calculation, we deliver the optimum solution.
China
Optibelt Shanghai Representative Office
Rong Guang Business Centre Room 1218
11, Chang Shun Road
Shanghai 200051/China
Tel. +86-21-6209 1912
Fax +86-21-6208 6906
USA
Optibelt Corporation
1120 W. National Avenue
Addison, Illinois 60 101/USA
Tel. +1-630-628-84 00
Fax +1-630-628-61 75
Singapore
Optibelt Asia Pacific Pte. Ltd.
No. 4 Loyang Way 1, # 01-02/03
Singapore 508708
Tel. +65-545-4682
Fax +65-545-4685
Australia
Optibelt Sales Office Australia
63, West Street
North Sydney NSW 2060
Australia
Tel. +61-2-9460 3493
Fax +61-2-9460 0655
22
Spain
Optibelt Espaa, S.A.
P.O. Box 1141
Rois de Corella, 12
E-08205 Sabadell
Tel. +34-3-7 20 79 60
Fax +34-3-7 11 64 90
Norway
Optibelt Norge AS
Torvet 5
N-2000 Lillestrm
Tel. +47-63-80 10 25
Fax +46-40-49 90 10
Sweden
Optibelt
Skandinaviska AB
Hstvgen 4
S-21235 Malm
Tel. +46-40-59 21 20
Fax +46-40-49 90 10
Denmark
Optibelt Danmark A/S
International House
Center Boulevard
DK-2300 Kbenhavn S
Tel. +45-32-47 32 34
Fax +46-40-49 90 10
United Kingdom
Optibelt (UK) Ltd.
5 Bishops Court
Winwick Quay
GB-Warrington WA2 8QY
Cheshire
Tel. +44-19 25-41 33 11
Fax +44-19 25-57 37 51
Netherlands
Optibelt Nederland B.V.
P.O. Box 39
NL-2140 AA Vijfhuizen
Schipholweg 955
NL-2143 CEBoesingheliede
Tel. +31-23-5 55 16 51
Fax +31-23-5 55 18 67
Belgium
Optibelt Belgium N.V./S.A.
Cornelis Schutstraat 28
B-2100 Deurne
Tel. +32-3-3 25 22 75
Fax +32-3-3 26 09 55
France
Optibelt France S.A.
54, Rue de la Gare
F-68520 Burnhaupt-le-Haut
Tel. +33-3-89 62 75 10
Fax +33-3-84 62 75 19
Transac S.A.
28, Grande rue
F-90170 Etueffont
Tel. +33-3-84 54 64 37
Fax +33-3-84 54 68 71
Poland
Optibelt Polska Sp. z o.o.
ul. Nieszawska 15
PL-61022 Poznan
Tel. +48-61-6 53 38 51
Fax +48-61-6 53 38 52
Optibelt GmbH
P.O. Box 10 01 32 D-37669 Hxter
Corveyer Allee 15 D-37671 Hxter
Tel. +49 (0)52 71-6 21
Fax +49 (0)52 71-97 62 00
Optibelt Produktions
GmbH & Co. KG
Rudolstdter Strae 23
D-07422 Bad Blankenburg
Tel. +49 (0)3 6741-48 30
Fax +49 (0)3 6741-4 21 01
Switzerland
Optibelt AG
Bodenackerstrasse 70
CH-4657 Dulliken
Tel. +41- 62-2 95 52 50
Fax +41-62-2 95 52 55
Austria
Optibelt sterreich
GmbH
Carlbergergasse 38
A-1230 Wien
Tel. +43-1-8 65 43 97
Fax +43-1-8 65 43 96
Italy
Optibelt AG
Via Dandolo, 1
I-20025 Legnano (Mi)
Tel. +39-0331-48 10 20
Fax +39-0331-48 10 75
Table of Contents
Standard Range
Drive belts
Standard Range
Drive belts
Standard Range
Metal
Standard Range
Metal
Optibelt V-grooved pulleys for wedge belts and classical V-belts ..................... 41-42
Table of Contents
Drive calculations
Power ratings
Special drives
Design hints
Special purpose
conveyor belts
Annex
Standard Range
optibelt SK Wedge Belts to BS 3790/DIN 7753 Part 1
Construction
Applications
Optibelt SK wedge belts with the sections SPZ, SPA, SPB and SPC
were specially developed for all industrial applications from lightly
loaded drives, such as those for pumps, to heavily loaded stone
crusher drives.
Filler rubber
Tension cord
Standards
Rubber core
Fabric cover
The base and filler rubbers are extruded to precise profile dimensions and weight per unit length to give a better fit in the pulley
grooves and vibration free running.
Polyester tension cord is standard, with yarn constructions matched
to section. The cord is specially impregnated and then encapsulated in a special rubber compound to give a perfect bond to the base
and filler rubber. In addition the cord is pre-stretched prior to
building into the belt to give lower stretch characteristics on the
drive. As a result, we were able to reduce significantly our
recommended minimum allowances for drive centre adjustment,
compared to those specified in BS/DIN/ISO.
Properties
Optibelt SK wedge belts are the result of intensive product and
material development. The use of the best materials and the most
advanced production methods, backed up by the most modern
static and dynamic test equipment ensures that the finished product
is a most efficient method of transmitting power
Table 1
Section
bo
Datum width
bd
Greater flexibility permits higher flexing rates (fB max = 100 per
sec.).
Belt heigth
hd
Recommended minimum
pulley datum diameter
dd min
SPZ
SPA
SPB
SPC
9.7
12.7
16.3
22
8,5
11
14
19
10
13
18
2,8
3,5
4,8
63
90
140
224
0.074
0.123
0.195
0.377
fB max
100
vmax
42
Standard Range
optibelt SK Wedge Belts to USA Standard RMA/MPTA
Construction/Properties
Table 2
Section
3V/9N
5V/15N 8V/25N
bo
15
25
Filler rubber
Belt heigth
13
23
Tension cord
Recommended minimum
pulley datum diameter
da min
63
140
335
0.074
0.195
0.575
Base rubber
Rubber impregnated
cover fabric
fB max
100
vmax
42
Standardisation/Dimensions
The three wedge belt sections standardised in the USA are 3V/9N,
5V/15N and 8V/25N. The cross section dimensions of these belts
and the lengths by which they are identified are not in accordance
with BS 3790 or DIN 7753.
Example:
Inch designation
Metric designation
3V 750
9N 1905
= designation for
single V-belt
= 1905 mm
Applications
The use of Optibelt SK wedge belt drives in sections 3V/9N and
5V/15N is recommended for machines exported to countries such
as the USA and Canada where these belt sections are standardised
and used predominantly.
Section 8V/25N is primarily employed in very heavy duty drives
such as mills or stone crushers. As these wedge belts transmit very
high levels of power, they can sometimes form a more compact
drive than the SPC section.
da
Standard Range
optibelt RED POWER II High Performance Wedge Belts
Construction
Standardisation / Dimensions
Optibelt Red Power II wedge belts with the sections SPZ, SPA, SPB,
SPC, 3V/9N, 5V/25N are standardised according to DIN 7753
Part 1, ISO 4184 and RMA/MPTA.
Section
Properties
bo
Datum width
bd
Belt heigth
Distance down to
datum line
hd
Its properties:
Recommended minimum
pulley datum diameter
dd min
The high-quality components in connection with product manufacturing make the Optibelt Red Power II a service free V-belt.
Production is continuously monitored using state-of-the-art static
and dynamic testing devices.
service free
strong power rating
favourable cost
SetConstant
environmentally friendly
SPZ
SPA
SPB
SPC
9.7
12.7
16.3
22
8.5
11
14
19
10
13
18
2,8
3,5
4,8
63
90
140
224
0.074
0.123
0.195
0.377
fB max
100
vmax
42
bo
15
25
V-belt tensioning
Datum width
13
23
For the initial fitting of Optibelt Red Power II the same calculation
methods are used as for standard Optibelt V-belts. The tensioning
values are to be calculated on the same basis or to be taken from
the table on page 129. Once correctly tensioned Optibelt Red
Power II V-belts need no retensioning.
Recommended minimum
pulley datum diameter
da min
63
140
335
0.195
0.575
Applications
Optibelt Red Power II wedge belts were especially developed for
mechanical engineering. The fields of application are among
8
Section
3V/9N
0.074
5V/15N 8V/25N
100
42
Standard Range
optibelt VB Classical V-Belts to BS 3790 and DIN 2215
Construction/Properties
Optibelt VB classical V-belts are manufactured using the same
production processes as those for Optibelt SK wedge belts.
possible within this Manual to describe all of the special constructions or the calculation data applicable to them. It is therefore
requested that all details of such drives are forwarded to our
Applications Engineering Department for calculation and recommendation.
Standardisation/Dimensions
Filler rubber
Tension cord
Base rubber
Rubber impregnated
cover fabric
Applications
Optibelt VB classical V-belts are employed primarily as replacements on industrial drives. For new drives, it is almost always
recommended that wedge belts be specified for reasons of space
and cost. However, special drives, such as V-flat, often can only use
classical V-belts. Similarly, difficult drives for agricultural and
horticultural machinery are often unsuitable for wedge belts by
virtue of the use of small pulleys or back bend idlers.For these
applications special belt constructions may be necessary. It is not
Table 3
Section
DIN 2215
(5)
(8)
10
13
17
(20)
22
(25)
32
40
BS 3790/ISO 4184
10
13
17
20
22
25
32
40
4.2
5.3
6.7
8.5
11
14
17
19
21
27
32
bo
Datum width
bd
Belt heigth
11
12,5
14
16
20
25
hd
1.3
1.6
2.0
2.5
3.3
4.2
4.8
5.7
6.3
8.1
12
Recommended minimum
pulley datum diameter
dd min
20
28
40
50
71
112
160
180
250
355
500
0.018 0.026 0.042 0.064 0.109 0.190 0.266 0.324 0.420 0.690 0.958
fB max
80
vmax
30
Standard Range
optibelt SUPER TX M=S V-Belts raw edge, moulded cogged
BS/DIN/ISO, RMA/MPTA
The advantages of the Optibelt Super TX M=S V-belts are evident
where
extremely small pulley diameters
Fabric
Tension cord
Bedding compound
Fibre reinforced base
compound
Moulded cog
Standard Range
optibelt SUPER TX M=S V-Belts raw edge, moulded cogged
BS/DIN/ISO, RMA/MPTA
Optibelt Super TX M=S V-belts are more heat and oil resistant than
wrapped V-belts as new, high quality rubber compounds are used.
Weight and space requirements are reduced by their ability to
transmit higher power even with small diameter pulleys often
resulting in a
significant reduction in cost.
Standardisation/Dimensions
The cross sections and dimensions of Optibelt Super TX M=S Vbelts correspond to BS 3790:1981, DIN 7753 Part 1, DIN 2215,
ISO 4184 and RMA/MPTA.
The basis for the length measurement is the datum length (Ld) to BS/
DIN/ISO.
Power Comparison
Table 4
Section
Wrapped belt
section SPA
Drive Calculation
Drive designs using Optibelt Super TX M=S belts should be
undertaken following the example given on pages 59 to 61. The
higher power ratings given in the relevant tables, apply. These are
based on a theoretical laboratory running time of 25,000 hours.
Belt
height
Distance
down to
datum line
bo
bd
hd
8.5
Belt
weight
(kg/m)
9.7
0.065
XPA
12.7
11
10
2.8
0.105
XPB
16.3
14
13
3.5
0.183
XPC
22
19
18
4.8
0.340
0.065
5VX/15NX
15
13
0.183
ZX/X10
10
8.5
2.5
0.062
AX/X13
13
11
3.3
0.099
BX/X17
17
14
11
4.2
0.165
CX/X22
22
19
14
5.7
0.276
Pulleys
Optibelt Super TX M=S V-belts are used with pulleys to BS 3790,
DIN 2211, DIN 2217, ISO 4183 and RMA/MPTA. Considerably
smaller minimum pulley datum diameters are acceptable.
Table 5
Recommend minimum pulley datum diameter (mm)
Datum
with
XPZ
3VX/9NX
Speed n (min-1)
Belt
top
width
Section
XPZ
raw edge,
moulded cogged
Section
wrapped
56
SPZ
XPA
71
SPA
90
XPB
112
SPB
140
XPC
180
SPC
224
3VX/9NX
5VX/15NX
56
112
3V/9N
5V/15N
63
63
140
ZX/X10
40
Z/10
Applications
50
AX/X13
63
A/13
71
BX/X17
90
B/17
112
CX/X22
140
C/22
180
11
Standard Range
optibelt KB Kraftbands
Construction
The Optibelt KB Kraftbands are made up of individual V-belts
rigidly connected by a cover plate. This compact drive element with
single-belt-characteristics is also known as a joined V-belt. According to application Kraftbands are fitted with two, three, four or five
ribs. It is also possible to provide the cover plate with specially
patterned surfaces.
Raw edge, moulded cogged Optibelt KBX Kraftbands with the belt
sections 3VX/9JX, 5VX/15JX, XPZ, XPA, AX/HAX, BX/HBX are
available upon request in lengths from 1250 to 3550 mm.
Optibelt KB
Optibelt KBX
PKR 3
Applications
Optibelt KB Kraftbands are predominantly employed for solving
problems associated with:
pulsating run
large centre distances in combination with small pulley diameters (long span lengths)
vertical shafts
reversing drives
V-flat drives
coupling drives
conveyor systems (materials handling technology)
12
Standard Range
optibelt KB Kraftbands
The ISO Committee TC 41/SC1 has used the American Standard
RMA/MPTA as the basis for this international standard. The
sections 3V, 5V, and 8V have been designated 9J, 15J and 25J
respectively.
Example: 9J
9 = approx. 9 mm nominal top width of pulley
groove
J = joined
Kraftband sets must be used for drives with more than 5 ribs. The
following combinations should be used.
Table 6
No. of ribs
Kraftband combination
2
3
4
5
6
7
7
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
2
3
4
5
3/3
3/4
4/4
5/4
5/5
4/3/4
4/4/4
4/5/4
5/4/5
5/5/5
4/4/4/4
4/4/5/4
5/4/4/5
5/4/5/5
5/5/5/5
4/4/5/4/4
5/4/4/4/5
5/4/5/4/5
5/5/4/5/5
5/5/5/5/5
5/4/4/4/4/5
5/5/4/4/4/5
5/5/4/4/5/5
5/5/5/4/5/5
5/5/5/5/5/5
5/4/4/5/4/4/5
5/5/4/4/4/5/5
5/5/5/4/4/5/5
5/5/5/4/5/5/5
5/5/5/5/5/5/5
5/5/4/4/4/4/5/5
5/5/5/4/4/4/5/5
5/5/5/4/4/5/5/5
5/5/5/5/4/5/5/5
5/5/5/5/5/5/5/5
Drive Calculation
Drives using Optibelt-KB Kraftbands in mechanical engineering
are to be fitted as shown in the calculation examples on pages 78
to 80 of this manual using the power ratings of the relevant belt
sections. In ISO 5290, the nominal top width of the pulley groove
is specified as the base value. The position of the datum diameter
is given as an approximate value. For the geometric and power
calculation, the outside diameter is used. Small computational
differences in rotational frequency and speed ratio have no
practical effect.
For Kraftbands with classical V-belts, as a rule, the calculation uses
the datum diameter as well. The power ratings correspond to the
sections of the classical V-belts.
For conversion factors for Optibelt-KB Kraftbands, see page 142.
Drives on agricultural machinery employ special design calculations and methods. We, therefore, request
that you send us your technical details.
Ordering Example
The drive of a mill is equipped with Optibelt KB Kraftbands, size
5V 1600/15J 4064 mm La. It was calculated with 18 ribs. In total,
4 Kraftbands are required - 2 belts each with 4 ribs and 2 belts each
with 5 ribs (see Table 6).
The order wording would then read:
1 set comprising 2 Optibelt KB Kraftbands 4-5V 1600/15J
4064 mm La and 2 Optibelt KB Kraftbands 5-5V 1600/15J
4064 mm La.
4 or 5
5V/15J
1600
4064
=
=
=
=
number of ribs
section
outside length in inches: 10
outside length in mm
13
Standard Range
optibelt SUPER VX and SUPER DVX Variable Speed Belts
raw edge moulded cogged DIN 7719/ISO 1604
Optibelt Super VX Variable Speed Belts
raw edge moulded cogged
Sections
Belt widths of
13 - 100 mm
Belt thicknesses of 5 - 25 mm
Dimensions
Lengths ranging from 500 to 5000 mm
Sections
Belt widths of
20 - 85 mm
Belt thicknesses of 10 - 30 mm
Applications
industrial machinery
variable speed drives
printing machinery
gearboxes
agricultural machinery
textile machinery
machine tools
automotive technology
special drives
compactors
multi-colour offset drives
variable diameter pulley sets
thresher drum drives
winding machinery
lathes
snowmobile drives
Dimensions
Lengths ranging from 600 to 3500 mm
Sections and dimensions comparable to DIN/ISO
Standard Range
optibelt DK Double Section V-Belts
Construction
A cross through the Optibelt DK double section V-belt reveals a
hexagon made up of two congruent trapeziums. The neutral axis
containing the tension cord is exactly half way up the.
Optibelt DK double section V-belts comprise:
These are thes HAA, HBB, HCC and HDD, that equate to the USA
Standard ASAE S 211. ..., thereby ensuring an international
interchange facility.
The effective/nominal length of the Optibelt DK double section
V-belt is measured on the effective/outside diameter of the measured pulley. This length equates roughly to length of the belt at its
widest part, the middle length.
Conversion factors are as follows:
Section
Section
Section
Section
Base rubber
Tension cord
AA/HAA
BB/HBB
CC/HCC
DD/HDD
effective
effective
effective
effective
length
length
length
length
=
=
=
=
middle
middle
middle
middle
length 4 mm
length 8 mm
length + 3 mm
length !
Base rubber
Rubber impregnated
cover fabric
Grooved Pulleys
No special pulleys are required for Optibelt DK double section
V-belts. Pulleys conforming to ISO 4183, BS 3790,DIN 2211,
DIN 2217 and ASAE S 211. ... are suitable.
Properties/Applications
The polyester tension cord positioned at the centre of the imparts
extreme flexibility and low stretch properties to the Optibelt DK
double section V-belt. The belt is therefore particularly suited for
flexing in different directions in the same plane. Optibelt DK double
section V-belts are used where several pulleys are arranged in one
plane and the direction of rotation of one or more of the driven
pulleys must be changed without crossing the belts. Because of the
positioning of the tension cord in the neutral axis and the special
shape of the double section V-belt, the tension cord is not subjected
to any force other than tension unlike standard V-belts bent around
an outside idler. The Optibelt DK double section V-belt comes into
its own on typical serpentine arrangements. Special constructions
are also possible. In the main, double section V-belts are used on
agricultural machinery. They are, however, also finding increasing
use in industrial machinery applications.
Section
Section
Section
Section
AA/HAA
BB/HBB
CC/HCC
DD/HDD
in
in
in
in
grooved
grooved
grooved
grooved
pulleys
pulleys
pulleys
pulleys
for
for
for
for
A/13-SPA
B/17-SPB
C/22-SPC
D/32
Special Sections
For special applications, we also supply double section V-belts
withs 22 x 22 and 25 x 22. These are not standardised.
Drive Calculation
Drive calculations for Optibelt DK double section V-belts differ from
those given in this manual for two pulley drives. Multi pulley
calculations are so complicated that they cannot be shown here.
Standardisation
Table 7
DIN/ISO section
Section
Abreviated
designation
HAA
HBB
HCC
HDD
AA
BB
CC
DD
22 x 22 25 x 22
Belt width
13
17
22
32
22
25
Belt height
10
13
17
25
22
22
80
125
224
355
280
280
0.250
0.440
0.935
0.511
0.625
Recommended minimum
pulley datum diameter
Belt weight (kg/m)
Max. belt speed (m/s)
da min
0.150
vmax.
30
15
Standard Properties
Oil Resistant
Oil resistance prevents damaging through
mineral oils and mineral fats, insofar as
those substances are not continuously and
in great quantities in contact with the Vbelts. Animal and vegetable fats as well as water-soluble cooling
and cutting oils result in any case in a reduction of the service life.
For higher concentrations, we recommend the use of our special
constructions 05 and Super TX V-belts respectively.
S=C plus
Standard V-Belts allow ambient temperatures of up to approximately + 70C. Higher temperatures lead to a premature
ageing and hardening of the V-belts. Therefore, we recommend in such cases the use of our special
construction XHR. For details see page 17.
Dust protection
Dust reduces the service life of V-belts
enormously. Wear-resistant fabric covers
make Optibel V-belts resistant to dust. This
is demonstrated by its continual application in cement factories,
mills, in the stone processing industries, and in the mining industry.
Special Constructions
Anti-Static
Optibelt V-belts do have anti-static properties. In the case of V-belts
with inadequate antistatic properties, the electrostatic charge can
be so high that there is a risk of ignition due to sparking. The use
of anti-static belts requires a check of the required properties in
accordance with ISO 1813. We present proof of the anti-static
properties of the belts in the form of our final inspection certificate
according to EN 10204 3.1.B.
We charge an extra fee for this additional service. We strongly
recommend your to order anti-static belts always separately.
Mining Industry
Service life
17
Standard Range
optibelt SK Wedge Belts to BS 3790/DIN 7753 Part 1/ ISO 4184
SPZ
SPB
SPC
Section SPZ
Section SPA
Section SPB
Section SPC
Datum length
ISO (mm)
Ld
Datum length
ISO (mm)
Ld
487
512
562
587
612
1037
1047
1060
1077
1087
1637
1662
1687
1700
1737
732
757
782
800
807
1382
1400
1407
1432
1457
2120
2132
2182
2207
2232
3350
3382
3550
3750
4000
1250
1320
1400
1500
1600
2000
2120
2240
2360
2500
630
637
662
670
687
1112
1120
1137
1162
1180
1762
1787
1800
1812
1837
832
850
857
882
900
1482
1500
1507
1532
1557
2240
2282
2300
2307
2332
4250
4500
1700
1800
1900
2000
2120
2650
2800
3000
3150
3350
710
722
737
750
762
1187
1202
1212
1237
1250
1862
1887
1900
1937
1987
907
932
950
957
982
1582
1600
1607
1632
1657
2360
2382
2432
2482
2500
2240
2360
2500
2650
2800
3550
3750
4000
4250
4500
772
787
800
812
825
1262
1287
1312
1320
1337
2000
2037
2120
2137
2187
1000
1007
1032
1060
1082
1682
1700
1707
1732
1757
2532
2582
2607
2632
2650
3000
3150
3250
3350
3550
4750
5000
5300
5600
6000
837
850
862
875
887
1347
1362
1387
1400
1412
2240
2287
2360
2500
2650
1107
1120
1132
1157
1180
1782
1800
1807
1832
1857
2682
2732
2782
2800
2832
3750
4000
4250
4500
4750
6300
6700
7100
7500
8000
900
912
925
937
950
1437
1462
1487
1500
1512
2800
3000
3150
3350
3550
1207
1232
1250
1257
1272
1882
1900
1907
1932
1957
2847
2882
2932
2982
3000
5000
5300
5600
6000
6300
8500
9000
9500
10000
10600
962
987
1000
1012
1024
1537
1562
1587
1600
1612
1282
1307
1320
1332
1357
1982
2000
2032
2057
2082
3032
3082
3150
3182
3282
6700
7100
7500
8000
11200
12500
Datum length
18
SPA
pitch length.
Lengths in bold print are in the S=C plus range.
Standard Range
optibelt SK Wedge Belts to USA Standard RMA/MPTA
3V/9N
5V/15N
8V/25N
Section 3V/9N
Section 5V/15N
Section 8V/25N
Designation
Designation
(outside length mm)
La
Designation
Designation
(outside length mm)
La
Designation
Designation
(outside length mm)
La
3V
3V
3V
3V
3V
250
265
280
300
315
9N
9N
9N
9N
9N
635
673
711
762
800
5V
5V
5V
5V
5V
530
560
600
630
670
15N
15N
15N
15N
15N
1346
1422
1524
1600
1702
8V
8V
8V
8V
8V
1000
1120
1180
1250
1320
25N
25N
25N
25N
25N
2540
2845
2997
3175
3353
3V
3V
3V
3V
3V
335
355
375
400
425
9N 851
9N 902
9N 952
9N 1016
9N 1079
5V
5V
5V
5V
5V
710
750
800
850
900
15N
15N
15N
15N
15N
1803
1905
2032
2159
2286
8V
8V
8V
8V
8V
1400
1500
1600
1700
1800
25N
25N
25N
25N
25N
3556
3810
4064
4318
4572
3V
3V
3V
3V
3V
450
475
500
530
560
9N 1143
9N 1206
9N 1270
9N 1346
9N 1422
5V 950
5V 1000
5V 1060
5V 1120
5V 1180
15N
15N
15N
15N
15N
2413
2540
2692
2845
2997
8V
8V
8V
8V
8V
1900
2000
2120
2240
2360
25N
25N
25N
25N
25N
4826
5080
5385
5690
5994
3V
3V
3V
3V
3V
600
630
670
710
750
9N
9N
9N
9N
9N
1524
1600
1702
1803
1905
5V
5V
5V
5V
5V
1250
1320
1400
1500
1600
15N
15N
15N
15N
15N
3175
3353
3556
3810
4064
8V
8V
8V
8V
8V
2500
2650
2800
3000
3150
25N
25N
25N
25N
25N
6350
6731
7112
7620
8001
3V 800
3V 850
3V 900
3V 950
3V 1000
9N
9N
9N
9N
9N
2032
2159
2286
2413
2540
5V
5V
5V
5V
5V
1700
1800
1900
2000
2120
15N
15N
15N
15N
15N
4318
4572
4826
5080
5385
8V
8V
8V
8V
8V
3350
3550
3750
4000
4250
25N 8509
25N 9017
25N 9525
25N 10160
25N 10795
3V
3V
3V
3V
3V
9N
9N
9N
9N
9N
2692
2845
2997
3175
3353
5V
5V
5V
5V
5V
2240
2360
2500
2650
2800
15N
15N
15N
15N
15N
5690
5994
6350
6731
7112
8V 4500
8V 4750
8V 5000
25N 11430
25N 12065
25N 12700
9N 3556
5V
5V
5V
5V
3000
3150
3350
3550
15N
15N
15N
15N
7620
8001
8509
9017
1060
1120
1180
1250
1320
3V 1400
19
Standard Range
optibelt RED POWER II High Performance Wedge Belt
USA Standard RMA/MPTA
3V/9N
5V/15N
8V/25N
Section 3V/9N
Section 5V/15N
Section 8V/25N
Designation
Designation
(outside length mm)
La
Designation
Designation
Designation
(outside length mm)
La
3V
3V
3V
3V
3V
475
500
530
560
600
9N
9N
9N
9N
9N
1206
1270
1346
1422
1524
5V
5V
5V
5V
5V
530
560
600
630
670
15N
15N
15N
15N
15N
1346
1422
1524
1600
1702
8V
8V
8V
8V
8V
1000
1120
1180
1250
1320
25N
25N
25N
25N
25N
2540
2845
2997
3175
3353
3V
3V
3V
3V
3V
630
670
710
750
800
9N
9N
9N
9N
9N
1600
1702
1803
1905
2032
5V
5V
5V
5V
5V
710
750
800
850
900
15N
15N
15N
15N
15N
1803
1905
2032
2159
2286
8V
8V
8V
8V
8V
1400
1500
1600
1700
1800
25N
25N
25N
25N
25N
3556
3810
4064
4318
4572
3V 850
3V 900
3V 950
3V 1000
3V 1060
9N
9N
9N
9N
9N
2159
2286
2413
2540
2692
5V 950
5V 1000
5V 1060
5V 1120
5V 1180
15N
15N
15N
15N
15N
2413
2540
2692
2845
2997
8V
8V
8V
8V
8V
1900
2000
2120
2240
2360
25N
25N
25N
25N
25N
4826
5080
5385
5690
5994
3V
3V
3V
3V
3V
9N
9N
9N
9N
9N
2845
2997
3175
3353
3556
5V
5V
5V
5V
5V
1250
1320
1400
1500
1600
15N
15N
15N
15N
15N
3175
3353
3556
3810
4064
8V
8V
8V
8V
8V
2500
2650
2800
3000
3150
25N
25N
25N
25N
25N
6350
6731
7112
7620
8001
5V
5V
5V
5V
5V
1700
1800
1900
2000
2120
15N
15N
15N
15N
15N
4318
4572
4826
5080
5385
8V 3350
5V
5V
5V
5V
5V
2240
2360
2500
2650
2800
15N
15N
15N
15N
15N
5690
5994
6350
6731
7112
1120
1180
1250
1320
1400
5V 3000
5V 3150
20
Designation
(outside length mm)
La
25N 8509
15N 7620
15N 8001
Standard Range
optibelt RED POWER II High Performance Wedge Belt
BS 3790/DIN 7753 Part 1/ ISO 4184
SPZ
SPA
SPB
SPC
Section SPZ
Section SPA
Section SPB
Section SPC
Datum length
ISO (mm)
Ld
Datum length
ISO (mm)
Ld
1202
1212
1237
1250
1262
1587
1600
1612
1637
1662
2137
2187
2240
2287
2360
1207
1232
1250
1257
1282
1700
1707
1732
1757
1782
2282
2300
2307
2332
2360
3082
3150
3182
3282
3350
1250
1320
1400
1500
1600
2000
2120
2240
2360
2500
1287
1312
1320
1337
1362
1687
1700
1737
1762
1787
2500
2650
2800
3000
3150
1307
1320
1332
1357
1382
1800
1807
1832
1857
1882
2382
2432
2482
2500
2532
3382
3550
3750
4000
1700
1800
1900
2000
2120
2650
2800
3000
3150
3350
1387
1400
1412
1437
1462
1800
1837
1862
1887
1900
3350
3550
1400
1407
1432
1457
1482
1900
1907
1932
1957
1982
2582
2607
2632
2650
2682
2240
2360
2500
2650
2800
3550
3750
4000
4250
4500
1487
1500
1512
1537
1562
1937
1987
2000
2037
2120
1500
1507
1532
1557
1582
2000
2032
2057
2082
2120
2732
2782
2800
2832
2847
3000
3150
3350
3550
3750
4750
5000
5300
5600
6000
1600
1607
1632
1657
1682
2132
2182
2207
2232
2240
2882
2932
2982
3000
3032
4000
4250
4500
4750
5000
6300
6700
7100
7500
8000
5300
5600
6000
6300
6700
7100
7500
8000
Datum length Ld
21
Standard Range
optibelt VB Classical V-Belts to DIN 2215/ISO 4184
Section 5*
Section Y/6*
Y/6
Z/10
Section 8
Datum length
ISO
Ld (mm)
Inside
length
Li (mm)
Datum length
ISO
Ld (mm)
Inside
length
Li (mm)
Datum length
ISO
Ld (mm)
200
239
270
290
310
190
229
260
280
300
295
315
350
415
440
280
300
335
400
425
335
375
420
445
470
315
355
400
425
450
Z
Z
Z
Z
Z
11
121/2
14
15
16
312
337
397
422
447
290
315
375
400
425
Z
Z
Z
Z
Z
325
332
345
385
435
315
322
335
375
425
465
515
555
615
865
450
500
540
600
850
495
510
550
580
595
475
490
530
560
575
Z
Z
Z
Z
Z
17
18
19
193/4
20
472
497
502
522
537
450
475
480
500
515
485
510
540
564
610
475
500
530
554
600
620
650
690
720
730
600
630
670
700
710
Z
Z
Z
Z
Z
201/2
21
211/4
22
23
547
552
562
582
597
770
795
820
845
870
750
775
800
825
850
Z
Z
Z
Z
Z
24
25
26
27
271/2
Other sizes
on request
Other sizes
on request
Weight:
0,018 kg/m
Weight:
0,026 kg/m
Inside
length
Li (mm)
Section Z/10
Belt No.
Datum length
ISO
Ld (mm)
Inside
length
Li (mm)
Datum length
ISO
Ld (mm)
Inside
length
Li (mm)
381/2
39
40
401/2
41
997
1022
1038
1052
1063
975
1000
1016
1030
1041
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
411/2
42
43
431/4
44
1072
1082
1102
1122
1142
1050
1060
1080
1100
1120
Z
Z
Z
Z
Z
525
530
540
560
575
Z
Z
Z
Z
Z
45
46
461/2
47
48
1172
1187
1202
1216
1237
1150
1165
1180
1194
1215
Z 93
Z 98
622
652
672
692
722
600
630
650
670
700
Z
Z
Z
Z
Z
481/2
49
50
51
52
1247
1272
1292
1317
1342
1225
1250
1270
1295
1320
Belt No.
895
920
970
1020
1040
875
900
950
1000
1020
Z
Z
Z
Z
Z
28
281/2
29
291/2
30
732
747
752
772
787
710
725
730
750
765
Z
Z
Z
Z
Z
53
54
55
56
57
1368
1393
1422
1444
1472
1346
1371
1400
1422
1450
1070
1095
1140
1220
1270
1050
1075
1120
1200
1250
Z
Z
Z
Z
Z
31
311/2
32
33
331/2
797
822
842
847
872
775
800
820
825
850
Z 58
Z 59
Z 60
Z 61
Z 62
1497
1522
1546
1572
1597
1475
1500
1524
1550
1575
Z
Z
Z
Z
Z
34
35
36
37
38
887
897
922
947
972
865
875
900
925
950
Z
Z
Z
Z
Z
1622
1648
1673
1697
1722
1600
1626
1651
1675
1700
Weight:
0,042 kg/m
63
64
65
66
67
Datum length
ISO
Ld (mm)
Inside
length
Li (mm)
68
69
70
71
73
1747
1772
1797
1822
1872
1725
1750
1775
1800
1850
75
78
79
831/2
88
1922
1997
2022
2142
2262
1900
1975
2000
2120
2240
2382
2522
2360
2500
Belt No.
Datum length
22
pitch length.
Standard Range
optibelt VB Classical V-Belts to DIN 2215/ISO 4184
A/13
Section A/13
Belt No.
Datum length
ISO
Ld (mm)
Inside length
Li (mm)
Belt No.
Datum length
ISO
Ld (mm)
Inside length
Li (mm)
Belt No.
Datum length
ISO
Ld (mm)
Inside length
Li (mm)
Belt No.
Datum length
ISO
Ld (mm)
Inside length
Li (mm)
A
A
A
A
A
16
18
19
20
21
437
487
510
538
565
407
457
480
508
535
A
A
A
A
A
41
411/2
42
421/2
43
1071
1080
1090
1105
1130
1041
1050
1060
1075
1100
A
A
A
A
A
69
70
71
72
73
1780
1805
1830
1855
1884
1750
1775
1800
1825
1854
A
A
A
A
A
105
107
108
110
112
2697
2755
2773
2830
2875
2667
2725
2743
2800
2845
A
A
A
A
A
22
23
231/2
24
25
590
605
630
640
660
560
575
600
610
630
A
A
A
A
A
431/2
44
45
451/2
46
1135
1150
1173
1180
1198
1105
1120
1143
1150
1168
A
A
A
A
A
74
75
76
77
78
1910
1930
1960
1986
2010
1880
1900
1930
1956
1980
A
A
A
A
A
114
116
118
120
124
2926
2976
3030
3078
3180
2896
2946
3000
3048
3150
A
A
A
A
A
26
261/2
27
271/2
28
680
700
716
730
740
650
670
686
700
710
A
A
A
A
A
461/2
47
471/2
48
481/2
1210
1230
1245
1250
1255
1180
1200
1215
1220
1225
A
A
A
A
A
79
80
81
82
83
2030
2062
2090
2113
2130
2000
2032
2060
2083
2100
A
A
A
A
A
128
132
136
140
144
3280
3380
3484
3580
3688
3250
3350
3454
3550
3658
A
A
A
A
A
29
291/2
30
31
311/2
760
780
797
805
830
730
750
767
775
800
A
A
A
A
A
49
50
51
52
53
1280
1300
1330
1350
1380
1250
1270
1300
1320
1350
A
A
A
A
A
831/2
84
841/2
85
86
2150
2164
2180
2190
2230
2120
2134
2150
2160
2200
A
A
A
A
A
148
158
167
187
197
3780
4030
4280
4780
5030
3750
4000
4250
4750
5000
A
A
A
A
A
32
321/2
33
34
341/2
843
855
871
880
905
813
825
841
850
875
A
A
A
A
A
54
55
56
57
58
1405
1430
1452
1480
1505
1375
1400
1422
1450
1475
A
A
A
A
A
87
88
89
90
91
2240
2270
2291
2316
2341
2210
2240
2261
2286
2311
A
A
A
A
A
35
351/2
36
37
371/2
919
930
944
955
980
889
900
914
925
950
A
A
A
A
A
59
60
61
62
63
1530
1555
1580
1605
1630
1500
1525
1550
1575
1600
A
A
A
A
A
92
93
94
95
96
2367
2390
2418
2443
2468
2337
2360
2388
2413
2438
A
A
A
A
A
38
381/2
39
40
401/2
995
1005
1030
1046
1060
965
975
1000
1016
1030
A
A
A
A
A
64
65
66
67
68
1655
1680
1706
1730
1755
1625
1650
1676
1700
1725
A
A
A
A
A
97
98
100
102
104
2494
2530
2570
2621
2680
2464
2500
2540
2591
2650
pitch length.
23
Standard Range
optibelt VB Classical V-Belts to DIN 2215/ISO 4184
B/17
Section B/17
Belt No.
Datum length
ISO
Ld (mm)
Inside length
Li (mm)
B 23
B 24
B 25
B 26
B 261/2
B 27
B 28
B 29
B 30
B 31
B 32
B 321/2
B 33
B 34
B 341/2
B 35
B 36
B 37
B 371/2
B 38
B 381/2
B 39
B 40
B 401/2
B 41
B 411/2
B 42
B 421/2
B 43
B 431/4
B 44
B 45
B 451/2
B 46
B 461/2
B 47
B 48
B 481/2
B 49
B 50
610
655
670
690
710
726
750
765
790
815
840
865
876
890
915
929
940
965
990
1005
1015
1040
1056
1070
1080
1090
1100
1115
1130
1140
1160
1190
1203
1215
1220
1240
1255
1265
1290
1315
570
615
630
650
670
686
710
725
750
775
800
825
836
850
875
889
900
925
950
965
975
1000
1016
1030
1040
1050
1060
1075
1090
1100
1120
1150
1163
1175
1180
1200
1215
1225
1250
1275
Belt No.
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
Datum length
ISO
Ld (mm)
Inside length
Li (mm)
1340
1360
1375
1390
1400
1412
1440
1462
1490
1513
1540
1565
1590
1615
1640
1665
1690
1716
1740
1765
1790
1801
1815
1840
1869
1890
1920
1940
1970
1990
2021
2040
2072
2100
2123
2140
2160
2174
2200
2240
1300
1320
1335
1350
1360
1372
1400
1422
1450
1473
1500
1525
1550
1575
1600
1625
1650
1676
1700
1725
1750
1761
1775
1800
1829
1850
1880
1900
1930
1950
1981
2000
2032
2060
2083
2100
2120
2134
2160
2200
51
52
521/2
53
531/2
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
691/2
70
71
72
73
74
75
76
77
78
79
80
81
82
83
831/2
84
85
86
Belt No.
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
87
88
89
90
91
92
93
94
941/2
95
96
961/2
97
98
99
100
101
102
103
104
105
106
107
108
110
112
114
115
116
118
120
122
124
126
128
130
132
134
136
138
Datum length
ISO
Ld (mm)
Inside length
Li (mm)
2250
2280
2301
2326
2340
2377
2400
2428
2440
2453
2478
2490
2505
2540
2555
2580
2605
2640
2656
2690
2707
2740
2758
2790
2840
2885
2940
2961
2990
3040
3088
3139
3190
3240
3290
3342
3390
3444
3490
3545
2210
2240
2261
2286
2300
2337
2360
2388
2400
2413
2438
2450
2465
2500
2515
2540
2565
2600
2616
2650
2667
2700
2718
2750
2800
2845
2900
2921
2950
3000
3048
3099
3150
3200
3250
3302
3350
3404
3450
3505
Belt No.
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
140
142
144
146
148
150
151
152
154
155
156
158
160
162
165
167
173
175
177
180
187
195
197
208
210
220
236
240
248
264
276
280
Datum length
ISO
Ld (mm)
Inside length
Li (mm)
3590
3640
3698
3740
3790
3850
3890
3901
3952
3990
4002
4040
4104
4155
4240
4290
4434
4490
4540
4612
4790
4993
5040
5340
5374
5640
6040
6136
6340
6740
7040
7140
3550
3600
3658
3700
3750
3810
3850
3861
3912
3950
3962
4000
4064
4115
4200
4250
4394
4450
4500
4572
4750
4953
5000
5300
5334
5600
6000
6096
6300
6700
7000
7100
24
pitch length.
Standard Range
optibelt VB Classical V-Belts to DIN 2215/ISO 4184
20
C/22
25
Section 20
Section C/22
Section 25
Datum length
ISO
Ld (mm)
Inside length
Li (mm)
Belt
No.
Datum length
ISO
Ld (mm)
Inside length
Li (mm)
950
1050
1170
1230
1300
1370
1450
1550
1650
1750
1850
1950
2050
2170
2290
2410
2550
2700
2850
3050
3200
3400
3600
3800
4050
4550
5050
6050
900
1000
1120
1180
1250
1320
1400
1500
1600
1700
1800
1900
2000
2120
2240
2360
2500
2650
2800
3000
3150
3350
3550
3750
4000
4500
5000
6000
C 43
C 47
C 48
C 49
C 51
C 52
C 53
C 54
C 55
C 56
C 57
C 58
C 59
C 60
C 61
C 62
C 63
C 65
C 66
C 67
C 68
C 69
C 70
C 71
C 72
C 73
C 74
C 75
C 76
C 77
C 78
C 79
C 80
C 81
C 82
C 83
C 831/2
C 84
C 85
C 86
C 87
C 88
C 89
C 90
C 92
C 93
C 94
C 95
C 96
C 961/2
C 97
C 98
C 99
C 100
C 101
1148
1258
1273
1308
1353
1378
1408
1433
1458
1483
1508
1533
1558
1582
1608
1632
1658
1708
1734
1758
1785
1808
1836
1858
1887
1912
1938
1958
1988
2014
2039
2058
2090
2118
2141
2166
2178
2192
2217
2242
2268
2298
2319
2344
2395
2418
2446
2471
2496
2508
2522
2558
2583
2598
2618
1090
1200
1215
1250
1295
1320
1350
1375
1450
1425
1450
1475
1500
1524
1550
1574
1600
1650
1676
1700
1727
1750
1778
1800
1829
1854
1880
1900
1930
1956
1981
2000
2032
2060
2083
2108
2120
2134
2159
2184
2210
2240
2261
2286
2337
2360
2388
2413
2438
2450
2464
2500
2525
2540
2560
Datum length
pitch length.
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
Belt
No.
Datum length
ISO
Ld (mm)
Inside length
Li (mm)
102
104
105
106
108
110
112
114
115
116
117
118
120
122
124
126
128
130
132
134
136
138
140
142
144
146
148
150
158
162
166
167
168
170
173
175
177
180
187
190
195
197
208
210
220
225
236
240
248
264
270
280
295
300
315
2649
2700
2725
2750
2808
2858
2903
2954
2979
3008
3023
3058
3106
3157
3208
3258
3308
3360
3408
3462
3508
3563
3608
3665
3716
3758
3808
3868
4058
4158
4274
4308
4325
4376
4452
4503
4558
4630
4808
4884
5011
5058
5358
5392
5658
5773
6058
6154
6358
6758
6916
7158
7558
7678
8058
2591
2642
2667
2692
2750
2800
2845
2896
2921
2950
2965
3000
3048
3099
3150
3200
3250
3302
3350
3404
3450
3505
3550
3607
3658
3700
3750
3810
4000
4100
4216
4250
4267
4318
4394
4445
4500
4572
4750
4826
4953
5000
5300
5334
5600
5715
6000
6096
6300
6700
6858
7100
7500
7620
8000
Datum length
ISO
Ld (mm)
Inside length
Li (mm)
1460
1560
1660
1760
1860
1960
2060
2180
2300
2420
2560
2710
2760
2860
3060
3210
3410
3610
3810
4060
4310
4560
4810
5060
5360
5660
6060
6360
6760
7160
7560
8060
8560
9060
1400
1500
1600
1700
1800
1900
2000
2120
2240
2360
2500
2650
2700
2800
3000
3150
3350
3550
3750
4000
4250
4500
4750
5000
5300
5600
6000
6300
6700
7100
7500
8000
8500
9000
25
Standard Range
optibelt VB Classical V-Belts to DIN 2215/ISO 4184
Belt No.
D 79
D 98
D 104
D 110
D 118
D 120
D 124
D 128
D 132
D 135
D 136
D 140
D 144
D 148
D 154
D 158
D 162
D 167
D 173
D 177
D 180
D 187
D 195
D 197
D 208
D 210
D 220
D 225
D 236
D 240
D 248
D 264
D 270
D 280
D 295
D 300
D 315
D 330
D 335
D 354
D 374
D 394
D 441
D/32
E/40
Section D/32
Section E/40
Inside length
Li
2075
2575
2725
2875
3075
3123
3225
3326
3425
3500
3529
3625
3733
3825
4000
4075
4190
4325
4469
4575
4647
4825
5028
5075
5375
5409
5675
5790
6075
6171
6375
6775
6933
7175
7575
7695
8075
8457
8575
9075
9575
10075
11275
2000
2500
2650
2800
3000
3048
3150
3251
3350
3425
3454
3550
3658
3750
3925
4000
4115
4250
4394
4500
4572
4750
4953
5000
5300
5334
5600
5715
6000
6096
6300
6700
6858
7100
7500
7620
8000
8382
8500
9000
9500
10000
11200
26
pitch length.
Belt No.
E 118
E 158
E 197
E 220
E 236
E 248
E 280
E 295
E 315
E 354
E 394
E 441
E 492
Inside length
Li
3080
4080
5080
5680
6080
6380
7180
7580
8080
9080
10080
11280
12580
3000
4000
5000
5600
6000
6300
7100
7500
8000
9000
10000
11200
12500
Standard Range
optibelt SUPER TX M=S Wedge Belts Raw Edge, Moulded Cogged
DIN 7753 Part 1/ISO 4184 and RMA/MPTA
XPZ
XPA
XPB
XPC
Section XPZ
Section XPA
Section XPB
Section XPC
3VX/9NX
Section 3VX/9NX
Designation
Designation
La
(outside length mm)
5VX/15NX
Section 5VX/15NX
Designation
Designation
La
(outside length mm)
587
612
630
637
662
1202
1212
1237
1250
1262
732
757
782
800
807
1500
1507
1532
1557
1582
1250
1320
1400
1500
1600
2000
2120
2240
2360
2500
3VX
3VX
3VX
3VX
3VX
250
265
280
300
315
9NX
9NX
9NX
9NX
9NX
635
673
711
762
800
5VX
5VX
5VX
5VX
5VX
500
530
560
600
630
15NX
15NX
15NX
15NX
15NX
1270
1346
1422
1524
1600
670
687
710
737
750
1287
1312
1320
1337
1362
832
850
857
882
900
1600
1607
1632
1700
1757
1700
1800
1900
2000
2120
2650
2800
3000
3150
3350
3VX
3VX
3VX
3VX
3VX
335
355
375
400
425
9NX
9NX
9NX
9NX
9NX
851
902
952
1016
1079
5VX
5VX
5VX
5VX
5VX
670
710
750
800
850
15NX
15NX
15NX
15NX
15NX
1702
1803
1905
2032
2159
762
772
787
800
812
1387
1400
1412
1437
1462
907
932
950
957
982
1800
1882
1900
2000
2120
2240
2360
2500
2650
2800
3550
3VX
3VX
3VX
3VX
3VX
450
475
500
530
560
9NX
9NX
9NX
9NX
9NX
1143
1206
1270
1346
1422
5VX
5VX
5VX
5VX
5VX
900
950
1000
1060
1120
15NX
15NX
15NX
15NX
15NX
2286
2413
2540
2692
2845
825
837
850
862
875
1487
1500
1512
1537
1562
1000
1007
1030
1060
1082
2240
2360
2500
2650
2800
3000
3150
3350
3550
3VX
3VX
3VX
3VX
3VX
600
630
670
710
750
9NX
9NX
9NX
9NX
9NX
1524
1600
1702
1803
1905
5VX
5VX
5VX
5VX
1180
1250
1320
1400
15NX
15NX
15NX
15NX
2997
3175
3353
3556
887
900
912
925
937
1587
1600
1612
1662
1700
1107
1120
1132
1157
1180
3000
3150
3350
3550
3VX
3VX
3VX
3VX
3VX
800
850
900
950
1000
9NX
9NX
9NX
9NX
9NX
2032
2159
2286
2413
2540
950
962
987
1000
1012
1762
1800
1900
2000
2120
1207
1232
1250
1257
1272
3VX
3VX
3VX
3VX
3VX
1060
1120
1180
1250
1320
9NX
9NX
9NX
9NX
9NX
2692
2845
2997
3175
3353
1037
1060
1077
1087
1112
2240
2360
2500
2650
2800
1282
1307
1320
1332
1357
3VX 1400
1120
1137
1162
1180
1187
3000
3150
3350
3550
1382
1400
1432
1457
1482
Weight:
0,065 kg/m
Datum length
Weight:
0,111 kg/m
pitch length.
Weight:
0,183 kg/m
Weight:
0,340 kg/m
Weight:
0,065 kg/m
9NX 3556
Weight:
0,183 kg/m
27
Standard Range
optibelt SUPER TX M=S V-Belt Raw Edge, Moulded Cogged
to BS 3790/DIN 2215/ISO 4184
ZX/X10
AX/X13
Section ZX/X10
ZX
ZX
ZX
ZX
ZX
ZX
ZX
ZX
ZX
ZX
ZX
ZX
ZX
ZX
ZX
ZX
ZX
ZX
ZX
ZX
ZX
ZX
23
24
25
26
27
28
29
291/2
311/2
32
33
331/2
35
36
37
38
40
42
461/2
52
55
59
597
622
652
672
692
732
752
772
822
842
847
872
897
922
947
972
1038*
1082*
1202*
1342*
1422*
1522*
28
Section AX/X13
Datum length
ISO
Ld (mm)
Belt No.
pitch length.
BX/X17
Belt No.
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
AX
Datum length
ISO
Ld (mm)
23
231/2
24
25
261/2
27
28
29
30
31
32
33
34
35
351/2
36
37
371/2
38
39
40
411/2
42
43
44
451/2
46
47
48
49
50
51
52
53
54
55
56
57
58
59
62
63
67
70
71
75
79
88
93
98
104
110
118
124
132
605
630
640
660
700
716
740
760
797
830
843
871
880
919
930
944
955
980
995
1030
1046
1080
1090
1130
1150
1180
1198
1230
1250
1280
1300
1330
1350
1380
1405
1430
1452
1480
1505
1530
1605
1630
1730
1805
1830
1930
2030
2270
2390
2530
2680*
2830*
3030*
3180*
3380*
CX/X22
Section BX/X17
Belt No.
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
Datum length
ISO
Ld (mm)
23
25
26
28
29
30
31
32
33
34
341/2
35
36
37
38
39
40
41
42
43
44
45
451/2
46
461/2
47
48
49
50
51
52
53
54
55
57
58
59
61
62
63
67
69
71
73
75
79
88
93
98
103
104
110
118
124
132
610
670
690
750
765
790
815
840
876
890
915
929
940
965
1005
1040
1056
1080
1100
1130
1160
1190
1203
1215
1220
1240
1255
1290
1315
1340
1360
1390
1412
1440
1490
1513
1540
1590
1615
1640
1740
1790
1840
1890
1940
2040
2280
2400
2540
2656*
2690*
2840*
3040*
3190*
3390*
Section CX/X22
Belt No.
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
CX
39
43
49
52
55
59
62
67
68
71
75
79
81
85
88
90
93
96
98
110
118
124
132
Datum length
ISO
Ld (mm)
1058*
1148*
1308*
1378*
1458*
1558*
1632*
1758*
1758*
1858*
1958*
2058*
2118*
2217*
2298*
2344*
2418*
2496*
2558*
2858*
3058*
3208*
3408*
Standard Range
optibelt KB Kraftbands with Wedge Belts
to DIN/ISO
Section SPZ
Section
SPZ
SPA
SPB
SPC
bo (mm)
9,7
12,7
16,5
22,0
h (mm)
10,5
12,5
15,6
22,6
Section SPA
Section SPB
Section SPC
Datum length
ISO
Ld (mm)
Datum length
ISO
Ld (mm)
Datum length
ISO
Ld (mm)
1250
1400
1500
1600
1700
1250
1400
1500
1600
1700
2000
2120
2240
2360
2500
3000
3150
3350
3550
3750
1800
1900
2000
2120
2240
1800
1900
2000
2120
2240
2650
2800
3000
3150
3350
4000
4250
4500
4750
5000
2360
2500
2650
2800
3000
2360
2500
2650
2800
3000
3550
3750
4000
4250
4500
5300
5600
6000
6300
6700
3150
3350
3550
3150
3350
3550
3750
4000
4750
5000
5300
5600
6000
7100
7500
8000
8500
9000
4250
4500
6300
6700
7100
7500
8000
9500
10000
10600
11200
11800
Datum length
ISO
Ld (mm)
12500
Datum length
pitch length.
29
Standard Range
optibelt KB Kraftbands with Wedge Belts
to RMA/MPTA
Section 3V/9J
Designation
3V/9J
bo (mm)
9,0
15,0
25,0
h (mm)
9,9
15,1
25,5
Section 5V/15J
Designation
(outside length mm)
La
Designation
5V/15J 8V/25J
Section 8V/25J
Designation
(outside length mm)
La
Designation
Designation
(outside length mm)
La
3V
3V
3V
3V
3V
500
530
560
600
630
9J
9J
9J
9J
9J
1270
1346
1422
1524
1600
5V
5V
5V
5V
5V
560
600
630
670
710
15J
15J
15J
15J
15J
1422
1524
1600
1702
1803
8V
8V
8V
8V
8V
1000
1060
1120
1180
1250
25J
25J
25J
25J
25J
2540
2692
2845
2997
3175
3V
3V
3V
3V
3V
670
710
750
800
850
9J
9J
9J
9J
9J
1702
1803
1905
2032
2159
5V
5V
5V
5V
5V
750
800
850
900
950
15J
15J
15J
15J
15J
1905
2032
2159
2286
2413
8V
8V
8V
8V
8V
1320
1400
1500
1600
1700
25J
25J
25J
25J
25J
3353
3556
3810
4064
4318
3V
3V
3V
3V
3V
900
950
1000
1060
1120
9J
9J
9J
9J
9J
2286
2413
2540
2692
2845
5V
5V
5V
5V
5V
1000
1060
1120
1180
1250
15J
15J
15J
15J
15J
2540
2692
2845
2997
3175
8V
8V
8V
8V
8V
1800
1900
2000
2120
2240
25J
25J
25J
25J
25J
4572
4826
5080
5385
5690
3V
3V
3V
3V
1180
1250
1320
1400
9J
9J
9J
9J
2997
3175
3353
3556
5V
5V
5V
5V
5V
1320
1400
1500
1600
1700
15J
15J
15J
15J
15J
3353
3556
3810
4064
4318
8V
8V
8V
8V
8V
2360
2500
2650
2800
3000
25J
25J
25J
25J
25J
5994
6350
6731
7112
7620
5V
5V
5V
5V
5V
1800
1900
2000
2120
2240
15J
15J
15J
15J
15J
4572
4826
5080
5385
5690
8V
8V
8V
8V
8V
3150
3350
3550
3750
4000
25J 8001
25J 8509
25J 9017
25J 9525
25J 10160
5V
5V
5V
5V
5V
2360
2500
2650
2800
3000
15J
15J
15J
15J
15J
5994
6350
6731
7112
7620
8V 4250
8V 4500
8V 4750
25J 10795
25J 11430
25J 12065
5V 3150
5V 3350
5V 3550
30
Section
15J 8001
15J 8509
15J 9017
Standard Range
optibelt KBX Kraftbands Raw Edge, Moulded Cogged
to USA Standard RMA/MPTA
Section 3VX/9JX
Designation
Section
3VX/9JX
5VX/15JX
bo (mm)
9,0
15,0
h (mm)
9,9
15,1
Section 5VX/15JX
Designation La
(outside length mm)
Designation
Designation La
(outside length mm)
3VX
3VX
3VX
3VX
3VX
500
530
560
600
630
9JX
9JX
9JX
9JX
9JX
1270
1346
1422
1524
1600
5VX
5VX
5VX
5VX
5VX
500
530
560
600
630
15JX
15JX
15JX
15JX
15JX
1270
1346
1422
1524
1600
3VX
3VX
3VX
3VX
3VX
670
710
750
800
850
9JX
9JX
9JX
9JX
9JX
1702
1803
1905
2032
2159
5VX
5VX
5VX
5VX
5VX
670
710
750
800
850
15JX
15JX
15JX
15JX
15JX
1702
1803
1905
2032
2159
3VX
3VX
3VX
3VX
3VX
900
950
1000
1060
1120
9JX
9JX
9JX
9JX
9JX
2286
2413
2540
2692
2845
5VX
5VX
5VX
5VX
5VX
900
950
1000
1060
1120
15JX
15JX
15JX
15JX
15JX
2286
2413
2540
2692
2845
3VX
3VX
3VX
3VX
1180
1250
1320
1400
9JX
9JX
9JX
9JX
2997
3175
3353
3556
5VX
5VX
5VX
5VX
1180
1250
1320
1400
15JX
15JX
15JX
15JX
2997
3175
3353
3556
Kraftbands with the Sections XPZ, XPA, XPB, AX/HAX and BX/HBX can be supplied on request.
Weight: 0,117 kg/m per rib
31
Standard Range
optibelt KB Kraftbands with Classical V-Belts
to DIN/ISO, ASAE
Section A/HA
(Section A)
Inside length
Belt
No.
Li (mm)
(Section HA)
Outside
length
La (mm)
Section
A/HA
B/HB
C/HC
D/HD
bo (mm)
13,0
17,0
22,0
32,0
h (mm)
9,9
13,0
16,2
22,4
Section B/HB
(Section B)
Inside length
Belt
No.
Li (mm)
(Section HB)
Outside
length
La (mm)
Section C/HC
(Section B)
Inside length
Belt
No.
Li (mm)
(Section HB)
Outside
length
La (mm)
(Section C)
Inside length
Belt
No.
Li (mm)
(Section HC)
Outside
length
La (mm)
Section D/HD
(Section D)
Inside length
Belt
No.
Li (mm)
(Section HD)
Outside
length
La (mm)
47
51
56
57
59
1200
1300
1422
1450
1500
1236
1336
1458
1486
1536
47
51
55
59
61
1200
1300
1400
1500
1550
1262
1362
1462
1562
1612
146
148
158
167
177
3700
3750
4000
4250
4500
3762
3812
4062
4312
4562
90
98
108
120
128
2286
2500
2750
3048
3250
2361
2575
2825
3123
3325
98
110
120
128
144
2500
2800
3048
3250
3658
2611
2911
3159
3361
3769
64
67
71
75
79
1625
1700
1800
1900
2000
1661
1736
1836
1936
2036
63
64
67
71
73
1600
1625
1700
1800
1850
1662
1687
1762
1862
1912
187
197
208
220
4750
5000
5300
5600
4812
5062
5362
5662
140
146
151
167
177
3550
3700
3850
4250
4500
3625
3775
3925
4325
4575
158
162
173
180
195
4000
4115
4394
4572
4953
4111
4226
4505
4683
5064
88
98
100
104
112
2240
2500
2540
2650
2845
2276
2536
2570
2686
2881
75
79
83
88
91
1900
2000
2100
2240
2300
1962
2062
2162
2302
2362
187
197
208
220
236
4750
5000
5300
5600
6000
4825
5075
5375
5675
6075
210
225
240
255
270
5334
5715
6096
6477
6858
5445
5826
6207
6588
6969
120
128
144
158
167
3048
3250
3658
4000
4250
3084
3286
3694
4036
4286
941/2
98
102
106
112
2400
2500
2600
2700
2845
2462
2562
2662
2762
2907
248
6300
6375
285
300
315
330
345
7239
7620
8000
8382
8763
7350
7731
8111
8493
8874
187
4750
4786
118
120
128
132
140
3000
3048
3250
3350
3550
3062
3110
3312
3412
3612
360
390
420
450
480
9144
9906
10668
11430
12200
9255
10017
10779
11541
12311
540
600
660
700
13716
15240
16764
17780
13827
15351
16875
17891
32
Standard Range
optibelt RED POWER II Kraftbands with High Performance Wedge Belts
DIN/ISO
Section
SPZ
SPA
SPB
SPC
bo (mm)
9,7
12,7
16,5
22,0
h (mm)
10,5
12,5
15,6
22,6
Section SPZ
Section SPA
Section SPB
Section SPC
Datum length
ISO
Ld (mm)
Datum length
ISO
Ld (mm)
Datum length
ISO
Ld (mm)
Datum length
ISO
Ld (mm)
1250
1400
1500
1600
1700
1250
1400
1500
1600
1700
2000
2120
2240
2360
2500
3000
3150
3350
3550
3750
1800
1900
2000
2120
2240
1800
1900
2000
2120
2240
2650
2800
3000
3150
3350
4000
4250
4500
4750
5000
2360
2500
2650
2800
3000
2360
3550
3750
4000
4250
4500
5300
5600
6000
6300
6700
4750
5000
5300
5600
6000
7100
7500
8000
3150
3350
3550
2500
2650
2800
3000
3150
3350
3550
3750
4000
4250
4500
6300
6700
7100
7500
8000
Weight:
0,120 kg/m per rib
Weight:
0,166 kg/m per rib
Weight:
0,261 kg/m per rib
Weight:
0,555 kg/m per rib
Datum length Ld
33
Standard Range
optibelt RED POWER II Kraftbands with High Performance Wedge Belts
DIN/ISO, RMA/MPTA
Section 3V/9J
Designation
3V/9J
bo (mm)
9,0
15,0
25,0
h (mm)
9,9
15,1
25,5
Section 5V/15J
Designation
(outside length mm)
La
Designation
5V/15J 8V/25J
Section 8V/25J
Designation
(outside length mm)
La
Designation
Designation
(outside length mm)
La
3V
3V
3V
3V
3V
500
530
560
600
630
9J
9J
9J
9J
9J
1270
1346
1422
1524
1600
5V
5V
5V
5V
5V
560
600
630
670
710
15J
15J
15J
15J
15J
1422
1524
1600
1702
1803
8V
8V
8V
8V
8V
1000
1060
1120
1180
1250
25J
25J
25J
25J
25J
2540
2692
2845
2997
3175
3V
3V
3V
3V
3V
670
710
750
800
850
9J
9J
9J
9J
9J
1702
1803
1905
2032
2159
5V
5V
5V
5V
5V
750
800
850
900
950
15J
15J
15J
15J
15J
1905
2032
2159
2286
2413
8V
8V
8V
8V
8V
1320
1400
1500
1600
1700
25J
25J
25J
25J
25J
3353
3556
3810
4064
4318
3V
3V
3V
3V
3V
900
950
1000
1060
1120
9J
9J
9J
9J
9J
2286
2413
2540
2692
2845
5V
5V
5V
5V
5V
1000
1060
1120
1180
1250
15J
15J
15J
15J
15J
2540
2692
2845
2997
3175
8V
8V
8V
8V
8V
1800
1900
2000
2120
2240
25J
25J
25J
25J
25J
4572
4826
5080
5385
5690
3V
3V
3V
3V
1180
1250
1320
1400
9J
9J
9J
9J
2997
3175
3353
3556
5V
5V
5V
5V
5V
1320
1400
1500
1600
1700
15J
15J
15J
15J
15J
3353
3556
3810
4064
4318
8V
8V
8V
8V
8V
2360
2500
2650
2800
3000
25J
25J
25J
25J
25J
5994
6350
6731
7112
7620
5V
5V
5V
5V
5V
1800
1900
2000
2120
2240
15J
15J
15J
15J
15J
4572
4826
5080
5385
5690
8V 3150
8V 3350
5V
5V
5V
5V
5V
2360
2500
2650
2800
3000
15J
15J
15J
15J
15J
5994
6350
6731
7112
7620
5V 3150
25J 8001
25J 8509
15J 8001
Weight:
0,102 kg/m per rib
Weight:
0,252 kg/m per rib
34
Section
Standard Range
optibelt SUPER VX Variable Speed Belts Raw Edge, Moulded Cogged
DIN 7719/ISO 1604
Section/
Inside length
Li (mm)
ISODesignation
(Datum length) Ld
13 x 5
468
500
17 x 5
426
476
536
570
606
776
W
W
W
W
W
W
21 x 6
530
600
610
675
770
870
970
1220
W 20 560
W 20 630
W 20 640
W 20 710
W 20 800
W 20 900
W 20 1000
W 20 1250
22 x 8
485
525
565
650
700
750
800
850
900
950
1000
1060
1185
16
16
16
16
16
16
450
500
560
600
630
800
Section/
Inside length
Li (mm)
26 x 8
655
672
710
750
762
800
862
962
1082
28 x 8
600
650
700
750
800
850
900
950
1000
1060
1120
1180
1250
1320
1400
1450
1500
30 x 10
650
665
700
800
850
875
900
950
1000
1035
1050
1120
1200
1320
1340
1500
1600
ISODesignation
(Datum length) Ld
W 25 690
W 25 710
W 25 750
W 25 790
W 25 800
W 25 840
W 25 900
W 25 1000
W 25 1120
Section/
Inside length
Li (mm)
ISODesignation
(Datum length) Ld
32 x 10
750
790
820
850
900
950
1000
1073
1120
1180
1200
1353
W 31,5 800
W 31,5 840
W 31,5 870
W 31,5 900
W 31,5 950
W 31,5 1000
W 31,5 1050
W 31,5 1120
W 31,5 1170
W 31,5 1230
W 31,5 1250
W 31,5 1400
37 x 10
660
800
850
900
950
1000
1020
1060
1120
1180
1250
1320
1400
1500
1600
1700
1800
41 x 13
925
1000
1040
1060
1120
1180
1190
1250
1340
1440
1600
1740
1940
Section/
Inside length
Li (mm)
52 x 16
1180
1250
1325
1400
1525
1600
1725
1925
2165
2240
Section/
Inside length
Li (mm)
ISODesignation
(Datum length) Ld
70 x 18
1600
1700
1800
1900
2000
2240
2500
47 x 13
1000
1060
1120
1180
1250
1320
1400
1500
1600
1700
1800
W
W
W
W
W
W
W
W
W
W
50
50
50
50
50
50
50
50
50
50
1250
1320
1400
1480
1600
1680
1800
2000
2240
2320
55 x 16
1400
1500
1600
1700
1800
W 40 990
W 40 1060
W 40 1100
W 40 1120
W 40 1180
W 40 1240
W 40 1250
W 40 1310
W 40 1400
W 40 1500
W 40 1660
W 40 1800
W 40 2000
65 x 20
1706
1906
ISODesignation
(Datum length) Ld
W 63 1800
W 63 2000
Tolerances
Length 1 % of the nominal belt length
Angle 1.5 of the nominal angle
Height 8 mm
= 0.8 mm
> 8 to 20 mm = 1.0 mm
> 20 mm
= 1.5 mm
Width 0.75 mm
35
Standard Range
optibelt SUPER VX Variable Speed Belts Raw Edge, Moulded Cogged
According to USA-Standard RMA/MPTA
RMA/MPTA designation
1422
1422
1422
1422
1422
V
V
V
V
V
235
240
270
290
300
1422
1422
1422
1422
1422
V
V
V
V
V
330
340
360
400
420
1422
1422
1422
1422
1422
V
V
V
V
V
440
460
470
480
540
2230
2230
2230
2230
2230
V
V
V
V
V
266
273
275
326
375
1422 V 600
1422 V 660
2322
2322
2322
2322
2322
V
V
V
V
V
329
347
364
396
421
2322
2322
2322
2322
2322
V
V
V
V
V
434
441
461
481
486
2322
2322
2322
2322
2322
V
V
V
V
V
521
541
601
661
681
1430 V 215
36
RMA/MPTA designation
1922
1922
1922
1922
1922
V
V
V
V
V
277
282
298
321
332
1922
1922
1922
1922
1922
V
V
V
V
V
338
363
381
386
403
1922
1922
1922
1922
1922
V
V
V
V
V
426
443
454
460
484
1922
1922
1922
1922
1922
V
V
V
V
V
526
544
604
630
646
1922
1922
1922
1922
1922
V
V
V
V
V
666
686
706
721
726
RMA/MPTA designation
1922 V 751
1922 V 756
2530 V 934
2530 V 990
1926
1926
1926
1926
1926
2830
2830
2830
2830
2830
V
V
V
V
V
250
275
290
407
415
1926 V 427
2322 V 701
2322 V 801
2426 V 353
2426 V 363
2530
2530
2530
2530
2530
V
V
V
V
V
500
530
560
600
630
2530
2530
2530
2530
2530
V
V
V
V
V
670
710
750
790
800
V
V
V
V
V
337
363
366
367
393
2830 V 396
2830 V 422
RMA/MPTA designation
3230
3230
3230
3230
3230
V
V
V
V
V
630
670
710
723
750
3230 V 800
3230 V 850
3432
3432
3432
3432
3432
V
V
V
V
V
450
456
480
528
534
2926
2926
2926
2926
2926
2926
V
V
V
V
V
V
471
486
521
546
574
586
2926
2926
2926
2926
2926
V
V
V
V
V
606
616
636
646
666
4430
4430
4430
4430
4430
V
V
V
V
V
530
548
555
560
570
2926
2926
2926
2926
2926
V
V
V
V
V
686
726
750
776
786
4430
4430
4430
4430
4430
V
V
V
V
V
578
600
610
630
652
3226
3226
3226
3226
3226
V
V
V
V
V
392
400
433
450
505
4430
4430
4430
4430
4430
V
V
V
V
V
660
670
690
700
710
3226
3226
3226
3226
3226
V
V
V
V
V
545
585
603
650
663
4430
4430
4430
4430
4430
V
V
V
V
V
730
750
790
800
850
4436
4436
4436
4436
4436
V
V
V
V
V
525
551
561
576
646
3226 V 723
3226 V 783
3226 V 843
3230
3230
3230
3230
3230
V
V
V
V
V
419
528
560
585
600
4036 V 541
4036 V 574
4436 V 750
Standard Range
optibelt DK Double Section V-Belts to DIN/ISO, ASAE
AA/HAA
BB/HBB
CC/HCC
Section AA/HAA
Reference length
(mm)
DD/HDD
Section BB/HBB
Reference length
(mm)
Belt No.
Belt No.
Reference length
(mm)
22 x 22
Section CC/HCC
Belt No.
Reference length
(mm)
Belt No.
2000
2032
2370
2500
2650
77
78
91
96
102
1980
2180
2300
2370
2500
75
83
88
90
95
3750
4010
4040
4200
4470
145
155
156
162
173
2280
2500
2800
3200
3310
86
94
106
122
126
2667
2800
3300
3920
103
108
128
152
2540
2600
2650
2740
2800
97
99
101
105
107
4500
4750
5000
5639
6900
174
184
194
221
270
3765
4000
4216
4300
4500
144
153
162
165
173
2850
2900
2920
3000
3030
109
111
112
115
116
5000
5300
5340
5750
193
204
206
224
3150
3250
3280
3325
3390
121
125
126
128
131
3450
3500
3550
3658
3730
133
135
137
141
144
AA/HAA 1350
BB/HBB 1350
CC/HCC 1600
DD/HDD 3000
22 x 22 3000
25 x 22 1600
to
to
to
to
to
to
28 000
28 000
28 000
10 000
10 000
28 000
mm
mm
mm
mm
mm
mm
25 x 22
Section DD/HDD
Reference length
(mm)
Belt No.
upon request
Section 22 x 22
5180
5220
5850
6270
Section 25 x 22
upon request
Standard Range
optibelt KS V-Grooved Pulleys optibelt TB Taper Bushes
optibelt RE Variable Speed Pulleys
38
Standard Range
optibelt KS V-Grooved Pulleys, Types
Type 1
Type 2
Type 7
Type 3
Type 8
Type 4
Type 9
Type 5
Type 10
Type 6
Type 11
Balancing
V-grooved pulleys are statically balanced in accordance with the
guidelines in VDI 2060, as standard:
Quality level Q 16; for dia. dd 400 mm at n = 1500 r.p.m.; for
dia. dd > 400 mm at v = 30 m/s.
The pulleys are balanced without keys on smooth balancing
spindles. Machines whose runners are balanced with a keyway
entered in the end of the shaft have to be ordered with the following
remark: Balanced with pilot bore and empty key on smooth
balancing spindles without fitted keyway.
Standard Range
Pulleys Standards Design Criteria Types
solid pulley
plate pulley
Belt
Top width
Datum width
Belt height/
groove depth
Example
Section
spoked pulley
Groove
SPZ
Z/10
SPZ Z/10
bo 9,7
bo 10
b1 9,7
bd = 8,5
h8
h6
bd = 8,5
tmin = 11
Standard Range
V-Grooved Pulleys DIN 2211 Page 1 for Wedge Belts and DIN 2217 Page 1
for Classical V-Belts
x =
Rz 25
y =
Rz 100
Break sharp
corners
y
Table 8
ISO
designation
Y*
Z*
A*
B*
C*
DIN 2215
designation
10
13
17
20
22
25
32
40
SPZ*
SPA*
SPB*
SPC*
bd
4.2
5.3
6.7
8.5
11.0
14.0
17.0
19.0
21.0
27.0
32.0
b1
5.0
6.3
8.0
9.7
12.7
16.3
20.0
22.0
25.0
32.0
40.0
1.3
1.6
2.0
2.0
2.8
3.5
5.1
4.8
6.3
8.1
12.0
V-belt
Section
Wedge
belt Section
6 0.3 8 0.3 10 0.3 12 0.3 15 0.3 19 0.4 23 0.4 25.5 0.5 29 0.5 37 0.6 44.5 0.7
5 0.5 6 0.5
Endless belts
7 0.6 8 0.6 10 0.6 12.5 0.8 15 0.8 17 1.0 19 1.0 24 2.0 29 2.0
dd min
Wedge belts
20
28
40
50
71
112
160
180
250
355
500
63
90
140
224
32 1 32 1 32 1
dd 50 dd 63 dd 75
36 1 36 1 36 1
dd > 50 dd > 63 dd > 75
1
2
3
4
5
6
7
8
9
10
11
12
18 + 0.6
22 + 0.6 28 + 0.6 33 + 0.6
0
0
0
0
24 + 0.6
0
0.6
0.6
0.6
21 +
26 +
33 +
38 + 0.6
0
0
0
0
10.0
16.0
22.0
28.0
34.0
40.0
12.0
20.0
28.0
36.0
44.0
52.0
60.0
14.0
24.0
34.0
44.0
54.0
64.0
74.0
84.0
34 1 34 1 34 1 34 1 34 1 34 1
dd 80 dd 118 dd 190 dd 250 dd 315 dd 355
36 30 36 30
dd 500 dd 630
38 1 38 1 38 1 38 1 38 30 38 30 38 30 38 30
dd > 80 dd > 118 dd > 190 dd > 250 dd > 315 dd > 355 dd > 500 dd > 630
16.0
28.0
40.0
52.0
64.0
76.0
88.0
100.0
112.0
(Figures in mm)
20.0
35.0
50.0
65.0
80.0
95.0
110.0
125.0
140.0
155.0
25.0
44.0
63.0
82.0
101.0
120.0
139.0
158.0
177.0
196.0
215.0
30.0
53.0
76.0
99.0
122.0
145.0
168.0
191.0
214.0
237.0
260.0
283.0
34.0
59.5
85.0
110.5
136.0
161.5
187.0
212.5
238.0
263.5
289.0
314.5
38.0
67.0
96.0
125.0
154.0
183.0
212.0
241.0
270.0
299.0
328.0
357.0
48.0
85.0
122.0
159.0
196.0
233.0
270.0
307.0
344.0
381.0
418.0
455.0
58.0
102.5
147.0
191.5
236.0
280.5
325.0
369.5
414.0
458.5
503.0
547.5
41
Standard Range
V-Grooved Pulleys DIN 2211 Page 1 for Wedge Belts
and DIN 2217 Page 1 for Classical V-Belts
Table 9
V-belt
section
Wedge
belt section
ISO
designation
DIN 2215
designation
10
13
17
20
22
25
32
40
SPZ
SPA
SPB
SPC
20.0
22.0
25.0
28.0
31.5
35.5
40.0
28.0
31.5
35.5
40.0
40
45.0
50.0
56.0
63.0
45.0
50.0
56.0
63.0
45
50
56
63
71.0
71.0
71
80.0
80.0
80
90.0
90
100.0
100
112.0
112
125.0
125
140
160
180
Datum diameter dd
200
0.3
40
45
50
56
63
67
71
75
80
85
90
95
100
106
63
67
71
75
80
85
90
95
100
106
112
118
125
132
140
150
160
112
118
125
132
140
150
160
170
180
190
200
212
224
250
170
180
190
200
212
224
225
236
250
170
180
190
200
212
224
225
236
250
265
280
300
315
280
300
315
280
355
355
400
400
280
300
315
335
355
375
400
425
450
450
450
450
500
560
630
500
560
630
500
560
630
710
710
800
900
1000
710
800
900
1000
0.4
90
95
100
106
112
118
125
132
140
150
160
160
180
200
224
250
315
355
Datum
diameter
dd
min
20.0
22.0
25.0
28.0
31.5
35.5
40.0
20.4
22.4
25.4
28.4
32.0
36.1
40.6
45.0
50.0
56.0
63.0
67.0
45.7
50.8
56.9
64.0
68.0
71.0
75.0
80.0
85.0
90.0
95.0
100.0
106.0
72.1
76.1
81.3
86.3
91.4
96.4
101.6
107.6
140
150
160
112.0
118.0
125.0
132.0
140.0
150.0
160.0
113.8
119.9
127.0
134.1
142.2
152.4
162.6
0.3
180
190
200
212
224
225
236
250
265
170.0
180.0
190.0
200.0
212.0
224.0
225.0
236.0
250.0
265.0
172.7
182.9
193.0
203.2
215.4
227.6
228.6
239.8
254.0
269.0
0.4
280.0
300.0
315.0
335.0
355.0
375.0
400.0
425.0
284.5
304.8
320.0
340.0
360.7
380.7
406.4
431.4
0.5
457.2
482.2
508.0
569.0
640.1
0.6
250
280
300
315
335
355
375
400
425
280
315
0.2
355
355
400
400
450
450
500
560
630
450
475
500
560
630
500
560
630
500
560
630
500
560
630
450.0
475.0
500.0
560.0
630.0
710
800
900
1000
710
800
900
1000
710
800
900
1000
710
800
900
1000
710
800
900
1000
710.0
800.0
900.0
1000.0
721.4
812.8
914.4
1016.0
0.8
1120
1250
1400
1600
1120
1250
1400
1600
1120
1250
1400
1600
1120
1250
1400
1600
1120
1250
1400
1600
1120.0
1250.0
1400.0
1600.0
1137.9
1270.0
1422.4
1625.6
1.0
1800
2000
1800
2000
1800
2000
1800
2000
1800
2000
1800.0
2000.0
1828.8
2032.0
1.2
400
0.6
For further details see standard DIN 2211 Page 1 and DIN 2217 Page 1. These V-grooved pulleys also accept Optibelt Super TX M=S V-belts.
Figures in bold type are the preferred datum diameters. For classical V-belts only. For Optibelt Super TX M=S wedge belts.
42
max
Run out
and
side
wobble
tolerance
Standard Range
V-Grooved Pulleys USA Standard RMA/MPTA for Wedge Belts
x =
Rz 25
y =
Rz 100
Break sharp
edges
y
Table 10
Belt section USA Standard RMA/MPTA
3V/9N
5V/15N
8V/25N
b1
8.89 0.13
15.24 0.13
25.4 0.13
10.30 0.40
17.50 0.40
28.6 0.40
+ 2.00
9.00 1.00
+ 3.00
13.00 1.00
+ 6.00
19.0 2.00
tmin
8.6
15.0
25.1
da min
63
140
315
36 25
da 63 to 90
38 25
da > 90 to 150
38 25
da 140 to 255
38 25
315 to 40
40 25
da > 150 to 305
40 25
da > 255 to 405
40 25
da >405 to 570
42 25
da > 305
42 25
da > 405
42 25
da > 570
18.0
26.0
38.0
28.3
43.5
66.6
38.6
61.0
95.2
48.9
78.5
123.8
59.2
96.0
152.4
69.5
113.5
181.0
79.8
131.0
209.6
90.1
148.5
238.2
100.4
166.0
266.8
10
110.7
183.5
295.4
11
121.0
201.0
324.0
12
131.3
218.5
(Values in mm)
352.6
For drives with several grooves the total of all deviations from the nominal value e for all groove distances of a pulley +/- 0.8 mm must not be exceeded. For further details
see US-Standard RMA/MPTA.
Note:
The permissible variations of the V-grooved pulley according to US-Standard RMA/MPTA deviate only slightly from the values contained in ISO 5290 Grooved pulleys
for joined narrow belts (Kraftbands). Therefore Optibelt KB Krafbands can be used for V-grooved pulleys manufactured according to both standards.
These V-grooved pulleys are also used for Optibelt Super TX M=S V-belts.
43
Standard Range
V-Pulleys for Kraftbands
x =
Rz 25
y =
Rz 100
Break sharp
edges
y
Table 11: V-pulleys for Kraftbands with wedge belts according to ISO 5290
Section
da
30
b1
h1max
h2max
tmin
3V/9J
67 to 90
> 90 to 150
> 150 to 300
> 300
36
38
40
42
8.9
0.20
0.30
8.9
10.3
0.25
5V/15J
180 to 250
> 250 to 400
> 400
38
40
42
15.2
0.25
0.40
15.2
17.5
8V/25J
315 to 400
> 400 to 560
> 560
38
40
42
25.4
0.30
0.50
25.4
28.6
fmin
da min
0.5
67
0.25
0.5
13
180
0.40
0.8
19
315
da
b1
h2
h1
b1 = effective width
da = effective outside diameter
The groove faces must be straight at least to the level of da - 2 h2.
Table 12: V-pulleys for Kraftbands with section SPZ, SPA, SPB and SPC according to DIN 2211/ ISO 4183
dd
30
SPZ
71 to 80
> 190
SPA
b1
tmin
Tol e1)
Tol e2)
34
38
9.7
2.0
11
12.0
0.3
0.6
8.0
71
100 to 118
> 80
34
38
12.7
2.8
14
15.0
0.3
0.6
10.0
100
SPB
160 to 190
> 190
34
38
16.3
3.5
18
19.0
0.4
0.8
12.5
160
SPC
250 to 315
> 315
34
38
22.0
4.8
24
25.5
0.40
0.8
17.0
250
Section
44
fmin
dd min
Standard Range
V-Pulleys for Kraftbands
Table 13: V-pulleys for Kraftbands with classical V-belts ISO 5291
Section
da
30
AJ/HA
80 to 125
> 125
34
38
BJ/HB
130 to 195
> 195
CJ/HC
DJ/HD
b1
h1max
h2max
tmin
13.0
0.20
0.35
1.5
12.0
34
38
16.5
0.25
0.40
2.0
210 to 325
> 325
34
38
22.4
0.30
0.45
370 to 490
> 490
36
38
32.8
0.30
0.55
fmin
da min
15.88
0.3
0.6
9.0
80
14.0
19.05
0.4
0.8
11.5
130
3.0
19.0
25.40
0.5
1.0
16.0
210
4.5
26.0
36.53
0.6
1.2
23.0
370
3V/9J
5V/15J 8V/25J
Number
of grooves
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
SPZ
SPA
SPB
SPC
43.50
61.00
78.50
96.00
113.50
131.00
148.50
166.00
183.50
201.00
218.50
236.00
253.50
271.00
288.50
306.00
323.50
341.00
358.50
376.00
393.50
411.00
428.50
446.00
463.50
481.00
498.50
516.00
533.50
551.00
568.50
586.00
603.50
621.00
638.50
656.00
673.50
691.00
708.50
66.60
95.20
123.80
152.40
181.00
209.60
238.20
266.80
295.40
324.00
352.60
381.20
409.80
438.40
467.00
495.60
524.20
552.80
581.40
610.00
638.60
667.20
695.80
724.40
753.00
781.60
810.20
838.80
867.40
896.00
924.60
953.20
981.80
1010.40
1039.00
1067.60
1096.20
1124.80
1153.40
28.00
40.00
52.00
64.00
76.00
88.00
100.00
112.00
124.00
136.00
148.00
160.00
172.00
184.00
196.00
208.00
220.00
232.00
244.00
256.00
268.00
280.00
292.00
304.00
316.00
328.00
340.00
352.00
364.00
376.00
388.00
400.00
412.00
424.00
436.00
448.00
460.00
472.00
484.00
35.00
50.00
65.00
80.00
95.00
110.00
125.00
140.00
155.00
170.00
185.00
200.00
215.00
230.00
245.00
260.00
275.00
290.00
305.00
320.00
335.00
350.00
365.00
380.00
395.00
410.00
425.00
440.00
455.00
470.00
485.00
500.00
515.00
530.00
545.00
560.00
575.00
590.00
605.00
44.00
63.00
82.00
101.00
120.00
139.00
158.00
177.00
196.00
215.00
234.00
253.00
272.00
291.00
310.00
329.00
348.00
367.00
386.00
405.00
424.00
443.00
462.00
481.00
500.00
519.00
538.00
557.00
576.00
595.00
614.00
633.00
652.00
671.00
690.00
709.00
728.00
747.00
766.00
59.50
85.00
110.50
136.00
161.50
187.00
212.50
238.00
263.50
289.00
314.50
340.00
365.50
391.00
416.50
442.00
467.50
493.00
518.50
544.00
569.50
595.00
620.50
646.00
671.50
697.00
722.50
748.00
773.50
799.00
824.50
850.00
875.50
901.00
926.50
952.00
977.50
1003.00
1028.50
AJ/HA
BJ/HB
CJ/HC
DJ/HD
57.40
82.80
108.20
133.60
159.00
184.40
209.80
235.20
260.60
286.00
311.40
336.80
362.20
387.60
413.00
438.40
463.80
489.20
514.60
540.00
565.40
590.80
616.20
641.60
667.00
692.40
717.80
743.20
768.60
794.00
819.40
844.80
870.20
895.60
921.00
946.40
971.80
997.20
1022.60
82.53
119.06
155.59
192.12
228.65
265.18
301.71
338.24
374.77
401.30
447.83
484.36
520.89
557.42
593.95
630.48
667.01
703.54
740.07
776.60
813.13
849.66
886.19
922.72
959.25
995.78
1032.31
1068.84
1105.37
1141.90
1178.43
1214.96
1251.49
1288.02
1324.55
1361.08
1397.61
1434.14
1470.67
b2 = (z 1) e + 2 f
33.88
49.76
65.64
81.52
97.40
113.28
129.16
145.04
160.92
176.80
192.68
20856
224.44
240.32
256.20
272.08
287.96
303.84
319.72
335.60
351.48
367.36
383.24
399.12
415.00
430.88
446.76
462.64
478.52
494.40
510.28
526.16
542.04
557.92
573.80
589.68
605.56
621.44
637.32
42.05
61.10
80.15
99.20
118.25
137.30
156.35
175.40
194.45
213.50
232.55
251.60
270.65
289.70
308.75
327.80
346.85
365.90
384.95
404.00
423.05
442.10
461.15
480.20
499.25
518.30
537.35
556.40
575.45
594.50
613.55
632.60
651.65
670.70
689.75
708.80
727.85
746.90
765.95
45
Standard Range
Deep Grooved Pulleys
x =
Rz 25
y =
Rz 100
Break sharp
edges
y
Table 15
Section DIN 7753 Part 1/ISO designation
SPZ
SPA
SPB
SPC
10
13
17
22
bd
8.5
11.0
14.0
19.0
= 34
11.0
15.0
18.9
26.3
= 38
11.3
15.4
19.5
27.3
4.0
6.5
8.0
12.0
14 0.3
18 0.3
23.0 0.4
31 0.5
8 0.6
10 0.6
12.5 0.8
17 1.0
13
18
22.5
31.5
34 1
dd 63 to 80
34 1
dd 90 to 118
34 1
dd 140 to 190
34 30
dd 224 to 315
38 1
dd > 80
38 1
dd >118
38 1
dd > 190
38 30
dd > 315
34 1
dd 50 to 80
34 1
dd 71 to 118
34 1
dd 112 to 190
34 30
dd 180 to 315
38 1
dd > 80
38 1
dd >118
38 1
dd > 190
38 30
dd > 315
b1
tmin
16
20
25
34
29
37
47
64
42
54
69
94
55
71
91
124
68
88
113
154
81
105
135
184
94
122
157
214
107
139
179
244
120
156
201
274
10
133
173
223
304
11
146
190
245
334
12
159
207
267
364
46
Standard Range
optibelt KS V-Grooved Pulleys for Taper Bushes Grooves to DIN 2211
Section SPZ/10
Datum
diameter
dd
(mm)
No.
of
grooves
Type
Weight
without
bush
( kg)
Taper
bush
50
1
2
11
11
0.30
0.40
1008
1008
56
1
2
11
11
0.40
0.50
1008
1108
60
1
2
8
11
0.20
0.60
1008
1108
63
1
2
3
8
6
6
0.20
0.30
0.40
1108
1108
1108
67
1
2
3
8
6
6
0.30
0.40
0.50
1108
1108
1108
71
1
2
3
8
6
6
0.30
0.40
0.60
1108
1108
1108
75
1
2
3
8
6
6
0.40
0.40
0.50
1108
1210
1210
80
1
2
3
4
8
6
6
6
0.50
0.60
0.70
0.80
1210
1210
1210
1210
85
1
2
3
4
5
8
6
6
6
6
0.60
0.50
0.60
0.90
1.00
1210
1610
1610
1610
1610
90
1
2
3
4
5
8
6
6
6
6
0.70
0.70
0.80
1.00
1.20
1210
1610
1610
1610
1610
1
2
3
4
5
8
6
6
6
6
0.70
0.80
0.90
1.10
1.30
1210
1610
1610
1610
1610
1
2
3
4
5
6*
8
6
6
6
6
6
0.80
0.90
1.10
1.10
1.30
1.40
1210
1610
1610
1610
2012
2012
95
100
Datum
diameter
dd
(mm)
No.
of
grooves
Taper
bush
1
2
3
4
5
6*
8
6
6
6
6
6
0.9
1.1
1.3
1.3
1.5
1.6
1610
1610
1610
1610
2012
2012
112
1
2
3
4
5
6*
8
6
6
6
6
6
1.0
1.3
1.3
1.5
1.8
1.9
1610
1610
2012
2012
2012
2012
118
1
2
3
4
5
6*
8
6
6
6
6
6
0.9
1.3
1.6
1.8
1.8
2.0
1610
1610
2012
2012
2012
2517
125
1
2
3
4
5
6*
8
6
2
2
6
6
1.0
1.4
1.8
2.2
2.3
2.5
1610
1610
2012
2012
2012
2517
132
1
2
3
4
5
6*
8
6
2
2
6
6
1.1
1.5
2.3
2.5
2.7
2.9
1610
1610
2012
2012
2517
2517
140
1
2
3
4
5
6*
8*
8
2
2
2
2
2
4
1.2
1.7
2.6
2.9
3.2
3.5
4.0
1610
1610
2012
2012
2517
2517
2517
150
1
2
3
4
5
6*
8*
8
8
2
2
2
2
4
1.2
2.0
3.1
3.7
4.0
4.4
5.1
1610
2012
2012
2517
2517
2517
2517
16
28
40
52
64
76
100
Taper bush
1008
1108
1210
1610
2012
2517
3020
10-25
10-28
11-32
14-42
14-50
16-60
25-75
Weight
without
bush
( kg)
106
No. of grooves z
Type
Solid pulley
O Plate pulley (with or without lightening holes)
Spoked pulley
Material: EN-GJL 200 (GG 20)
DIN 1691
* Non stock item
Bore diameter d2 see page 65
47
Standard Range
optibelt KS V-Grooved Pulleys for Taper Bushes Grooves to DIN 2211
Section SPZ/10
Datum
diameter
dd
(mm)
No.
of
grooves
Weight
without
bush
( kg)
Type
Datum
diameter
dd
(mm)
Taper
bush
No.
of
grooves
Weight
without
bush
( kg)
Taper
bush
160
1
2
3
4
5
6*
8*
8
8
2
2
2
2
4
1.3
2.5
3.6
4.4
4.8
5.2
5.6
1610
2012
2012
2517
2517
2517
2517
280
1
2
3
4
5
6*
8*
x
x
x
x
x
x
x
7
7
7
10
10
10
10
2.9
4.0
5.3
6.4
7.1
7.8
10.8
2012
2012
2517
2517
2517
2517
3020
170
1
2
3
4
5
6*
8
8
9
2
2
2
1.5
2.5
4.2
5.3
5.9
6.5
1610
2012
2012
2517
2517
2517
315
1
2
3
4
5
6*
x
x
x
x
x
x
7
7
7
10
10
10
3.1
4.2
6.1
7.6
8.6
9.3
2012
2012
2517
2517
2517
2517
180
1
2
3
4
5
6*
8*
O
O
O
O
8
8
9
9
9
9
4
1.6
2.5
4.8
6.1
6.3
6.8
7.1
1610
2012
2012
2517
2517
2517
3020
355
1
2
3
4
5
6*
8*
x
x
x
x
x
x
x
7
7
7
10
10
10
10
3.5
5.1
7.3
8.9
10.0
10.7
16.0
2012
2012
2517
2517
2517
2517
3030
190
1
2
3
4
5
6*
O
O
O
O
8
8
9
9
9
9
1.8
2.6
4.9
5.3
6.3
6.9
1610
2012
2012
2517
2517
2517
400
200
1
2
3
4
5
6*
8*
O
O
O
O
8
8
9
9
9
9
4
2.3
2.8
3.5
4.7
5.5
6.1
9.3
2012
2012
2012
2517
2517
2517
3020
1
2
3
4
5
6*
8*
x
x
x
x
x
x
x
7
7
7
10
10
10
10
6.0
6.3
8.0
10.1
11.7
14.5
18.2
2012
2517
2517
2517
3020
3020
3030
450
224
1
2
3
4
5
6*
8*
O
O
O
O
O
O
5
5
9
9
9
9
4
2.5
3.2
3.9
5.2
6.0
6.6
11.8
2012
2012
2012
2517
2517
2517
3020
1
2
3
4
5
6*
8*
x
x
x
x
x
x
x
7
7
7
10
10
10
10
6.1
8.2
9.8
11.8
13.9
16.9
24.0
2517
2517
2517
3020
3020
3030
3535
500
2
3
4
5
6*
x
x
x
x
x
7
7
10
10
10
9.1
11.4
14.3
17.6
19.9
2517
2517
3020
3020
3020
630
1
2
3
4
5
6
8*
x
x
x
x
x
x
x
7
7
10
10
10
10
10
2.8
3.5
4.3
5.7
7.0
7.0
10.5
2012
2012
2012
2517
2517
2517
3020
3
4
5
6*
x
x
x
x
7
10
10
7
15.9
20.0
22.7
33.6
2517
3020
3020
3535
250
No. of grooves z
Face width b2 (mm)
16
28
40
52
64
76
100
Taper bush
1610
2012
2517
3020
3030
3535
14-42
14-50
16-60
25-75
35-75
35-90
48
Type
Solid pulley
O Plate pulley (with or without lightening holes)
Spoked pulley
Material: EN-GJL 200 (GG 20)
DIN 1691
* Non stock item
Bore diameter d2 see page 65
Standard Range
optibelt KS V-Grooved Pulleys for Taper Bushes Grooves to DIN 2211
Section SPA/13
Datum
diameter
dd
(mm)
No.
of
grooves
Type
Weight
without
bush
( kg)
Taper
bush
Taper
bush
8
6
2
2
2
1.20
1.40
1.80
2.00
2.40
1610
1610
2012
2012
2012
125
1
2
3
4
5
8
2
2
2
2
1.40
1.70
2.00
2.50
2.70
1610
1610
2012
2012
2012
132
1
2
3
4
5
8
2
2
2
2
1.60
1.80
2.30
2.60
2.90
1610
2012
2012
2517
2517
140
1
2
3
4
5
8
2
2
2
2
1.8
2.0
2.8
3.1
3.4
1610
2012
2517
2517
2517
150
1
2
3
4
5
8
2
2
2
2
1.4
2.4
3.5
3.8
4.2
1610
2012
2517
2517
2517
1610
1610
1610
1610
1610
160
1
2
3
4
5
5
2
2
2
2
1.9
2.9
3.9
4.4
5.1
1610
2012
2517
2517
2517
0.90
1.10
1.40
2.00
2.00
1610
1610
1610
2012
2012
170
1
2
3
4
5
5
2
2
2
2
2.0
3.1
4.6
5.5
5.9
1610
2012
2517
2517
3020
1.00
1.20
1.30
1.90
2.10
1610
1610
2012
2012
2012
180
1
2
3
4
5
O
O
5
9
2
2
2
2.1
3.4
5.1
5.9
6.2
1610
2012
2517
2517
3020
190
1
2
3
4
5
O
O
5
9
2
2
2
2.3
3.8
5.4
6.8
7.4
1610
2012
2517
2517
3020
11
11
0.60
0.80
1108
1108
67
1
2
8
6
0.30
0.50
1108
1108
71
1
2
3
8
6
6
0.30
0.50
0.70
1108
1108
1108
75
1
2
3
8
6
6
0.40
0.60
0.80
1108
1108
1108
80
1
2
3
8
6
6
0.50
0.60
0.90
1210
1210
1210
85
1
2
3
8
6
6
0.60
0.70
1.00
1210
1210
1210
1
2
3
4
8
6
6
6
0.70
0.70
1.00
1.20
1210
1610
1610
1615
95
1
2
3
4
8
6
6
6
0.80
0.90
1.10
1.40
1210
1610
1610
1615
100
1
2
3
4
5
8
6
2
2
6
0.80
0.90
1.20
1.70
1.90
106
1
2
3
4
5
8
6
2
6
6
112
1
2
3
4
5
8
6
6
6
6
Weight
without
bush
( kg)
No. of grooves z
Type
1
2
3
4
5
1
2
No.
of
grooves
118
63
90
Datum
diameter
dd
(mm)
20
35
50
65
80
Taper bush
1108
1210
1610
1615
2012
2517
3020
10-28
11-32
14-42
14-42
14-50
16-60
25-75
Solid pulley
O Plate pulley (with or without lightening holes)
Spoked pulley
Material: EN-GJL 200 (GG 20)
DIN 1691
Bore diameter d2 see page 65
49
Standard Range
optibelt KS V-Grooved Pulleys for Taper Bushes Grooves to DIN 2211
Section SPA/13
Datum
diameter
dd
(mm)
No.
of
grooves
Type
Weight
without
bush
( kg)
Taper
bush
Datum
diameter
dd
(mm)
No.
of
grooves
Weight
without
bush
( kg)
Taper
bush
200
1
2
3
4
5
O
O
O
5
5
9
2
4
2.6
4.1
4.9
7.4
8.4
2012
2517
2517
3020
3020
450
1
2
3
4
5
x
x
x
x
x
7
7
7
10
7
7.0
10.3
14.1
15.5
24.3
2012
2517
3020
3020
3535
212
1
2
3
4
5
O
O
O
5
5
9
2
2
2.7
4.3
5.2
7.3
8.2
2012
2517
2517
3020
3020
500
1
2
3
4
5
x
x
x
x
x
7
7
7
10
7
8.0
11.6
16.0
18.2
27.3
2517
2517
3020
3020
3535
224
1
2
3
4
5
x
O
O
7
5
9
2
2
2.7
4.4
5.5
7.4
8.3
2012
2517
2517
3020
3020
560
1
2
3
4
5
x
x
x
x
x
7
7
7
7
7
11.6
15.5
17.8
26.7
30.4
2517
3020
3020
3535
3535
236
1
2
3
4
5
x
O
O
7
5
9
2
2
2.8
4.6
5.7
7.8
8.7
2012
2517
2517
3020
3020
630
1
2
3
4
5
x
x
x
x
x
7
7
7
7
7
10.1
16.0
22.0
30.8
33.7
2517
3020
3020
3535
3535
250
1
2
3
4
5
x
x
O
O
O
7
7
9
9
9
2.9
4.8
5.9
8.0
9.0
2012
2517
2517
3020
3020
280
1
2
3
4
5
x
x
O
O
O
7
7
9
9
5
3.3
5.4
6.7
8.8
15.5
2012
2517
2517
3020
3535
315
1
2
3
4
5
x
x
O
O
O
7
7
5
9
5
3.6
6.0
8.3
9.7
17.0
2012
2517
3020
3020
3535
355
1
2
3
4
5
x
x
x
x
x
7
7
7
10
7
4.2
6.7
9.2
11.0
18.6
2012
2517
3020
3020
3535
400
1
2
3
4
5
x
x
x
x
x
7
7
7
10
7
4.9
8.1
11.0
12.8
21.0
2012
2517
3020
3020
3535
20
35
50
65
80
Taper bush
2012
2517
3020
3535
14-50
16-60
25-75
35-90
No. of grooves z
50
Type
Solid pulley
O Plate pulley (with or without lightening holes)
Spoked pulley
Material: EN-GJL 200 (GG 20)
DIN 1691
Bore diameter d2 see page 65
Standard Range
optibelt KS V-Grooved Pulleys for Taper Bushes Grooves to DIN 2211
Section SPB/17
Datum
diameter
dd
(mm)
No.
of
grooves
Type
Weight
without
bush
( kg)
Taper
bush
Datum
diameter
dd
(mm)
100
1
2
3
1
6
6
0.9
1.2
1.7
1610
1610
1610
112
1
2
3
1
6
6
1.1
1.5
2.0
1610
1610
1610
118
1
2
3
1
6
6
1.3
1.7
2.3
1610
1610
1610
125
1
2
3
4
5
1
2
2
4
6
1.5
1.9
2.4
3.0
3.5
1610
2012
2012
2012
2012
132
1
2
3
4
5
1
2
2
4
4
1.8
2.2
2.8
3.4
3.7
1610
2012
2012
2012
2012
140
1
2
3
4
5
6
1
2
2
2
2
4
2.3
2.7
3.3
3.7
4.5
4.6
1610
2012
2012
2517
2517
2517
1
2
3
4
5
6
1
2
2
2
4
4
2.7
3.1
3.9
4.4
5.2
5.6
1610
2012
2517
2517
2517
2517
1
2
3
4
5
6
1
2
2
4
4
4
2.5
2.9
4.2
4.9
6.0
5.4
1610
2012
2517
2517
2517
3020
1
2
3
4
5
6
8
1
2
2
4
4
4
4
2.9
3.3
4.9
5.7
6.1
6.5
8.0
1610
2012
2517
2517
3020
3020
3020
150
160
170
No.
of
grooves
Weight
without
bush
( kg)
Taper
bush
180
1
2
3
4
5
6
8
1
8
2
4
4
4
4
4.1
4.5
5.5
6.9
7.1
7.7
9.5
1610
2517
2517
2517
3020
3020
3020
190
1
2
3
4
5
6
8
8
8
2
4
4
4
4
4.6
5.0
6.3
7.6
8.1
9.2
11.2
2012
2517
2517
2517
3020
3020
3030
200
1
2
3
4
5
6
8
8
8
2
2
2
4
4
5.0
5.4
6.5
8.8
9.1
10.3
13.5
2012
2517
2517
3020
3020
3020
3535
212
1
2
3
4
5
6
8
8
8
2
2
2
4
4
4.2
4.9
6.0
9.8
11.0
14.3
16.6
2012
2517
2517
3020
3020
3535
3535
224
1
2
3
4
5
6
8
10
8
8
2
2
2
4
4
4
4.7
5.3
6.3
11.3
12.7
17.0
19.3
21.8
2012
2517
2517
3020
3020
3535
3535
3535
236
1
2
3
4
5
6
8
10
x
x
8
8
10
10
6
4
4
4
5.0
5.5
7.0
14.5
16.9
20.0
22.3
25.3
2012
2517
2517
3020
3535
3535
3535
3535
10
25
44
63
82
101
120
158
196
Taper bush
1610
2012
2517
3020
3030
3535
14-42
14-50
16-60
25-75
35-75
35-90
No. of grooves z
Type
Solid pulley
O Plate pulley (with or without lightening holes)
Spoked pulley
Material: EN-GJL 200 (GG 20)
DIN 1691
Bore diameter d2 see page 65
51
Standard Range
optibelt KS V-Grooved Pulleys for Taper Bushes Grooves to DIN 2211
Section SPB/17
Datum
diameter
dd
(mm)
No.
of
grooves
Type
Weight
without
bush
( kg)
Taper
bush
Datum
diameter
dd
(mm)
250
1
2
3
4
5
6
8
10
8
7
2
2
2
4
4
4
5.4
5.5
7.7
19.6
21.7
23.3
27.5
29.3
2012
2517
3020
3020
3535
3535
3535
3535
265
2
3
4
6
8
O
O
O
O
7
9
9
9
9
6.2
8.0
9.5
16.7
24.0
2517
3020
3020
3525
3525
280
1
2
3
4
5
6
8
10
x
x
x
O
O
O
O
O
7
7
10
9
9
9
9
9
6.1
6.8
8.6
10.1
17.8
19.6
26.7
30.5
2012
2517
3020
3020
3535
3535
3535
3535
2
3
4
5
6
8
x
x
O
O
O
O
7
10
9
9
9
9
7.3
9.2
14.3
18.2
21.9
26.2
2517
3020
3020
3535
3535
3535
1
2
3
4
5
6
8
10
x
x
x
O
O
O
O
O
7
7
10
5
9
9
9
9
7.2
7.8
9.6
17.1
18.8
23.0
26.0
31.5
2012
2517
3020
3535
3535
3535
3535
3535
2
3
4
5
6
8
10*
x
x
x
x
x
x
x
7
10
7
10
10
10
10
7.8
10.5
18.3
19.5
22.0
28.2
36.0
2517
3020
3535
3535
3535
3535
4040
300
315
335
No.
of
grooves
x
x
x
x
O
x
x
7
10
7
10
9
10
10
8.7
10.8
18.6
20.8
22.8
27.0
38.0
3020
3020
3535
3535
3535
3535
4040
375
2
3
4
6
8
x
x
x
x
x
7
10
10
10
10
9.5
11.5
16.5
25.0
28.0
3020
3020
3525
3535
4040
400
2
3
4
5
6
8
10*
x
x
x
x
x
x
x
7
7
7
10
10
10
10
10.0
18.3
20.5
23.4
25.1
36.5
41.0
3020
3535
3535
3535
3535
4040
4040
425
2
3
4
6
8
x
x
x
x
x
7
7
10
10
10
11.5
18.0
19.5
25.1
52.5
3020
3535
3535
4040
4545
450
2
3
4
5
6
8
10*
x
x
x
x
x
x
x
7
7
7
10
10
10
10
12.1
21.9
24.5
27.3
35.5
40.9
53.5
3020
3535
3535
3535
4040
4040
4545
500
2
3
4
5
6
8
10*
x
x
x
x
x
x
x
7
7
7
10
10
10
10
13.2
23.1
26.6
29.9
38.9
45.5
61.0
3020
3535
3535
3535
4040
4040
4545
560
2
3
4
5
6
8
10*
x
x
x
x
x
x
x
7
7
7
7
10
10
10
16.5
25.9
29.0
35.3
43.1
49.0
55.7
3030
3535
3535
4040
4040
4545
4545
10
25
44
63
82
101
120
158
196
Taper bush
2012
2517
3020
3030
3535
14-50
16-60
25-75
35-75
35-90
52
Taper
bush
2
3
4
5
6
8
10*
Weight
without
bush
( kg)
355
No. of grooves z
Type
4040
4545
40-100 55-110
Solid pulley
O Plate pulley (with or without lightening holes)
Spoked pulley
Material: EN-GJL 200 (GG 20)
DIN 1691
* Non stock item
Bore diameter d2 see page 65
Standard Range
optibelt KS V-Grooved Pulleys for Taper Bushes Grooves to DIN 2211
Section SPB/17
Datum
diameter
dd
(mm)
No.
of
grooves
Type
Weight
without
bush
( kg)
Taper
bush
630
2
3
4
5
6
8
10*
x
x
x
x
x
x
x
7
7
7
7
10
10
10
18.5
28.9
33.3
43.1
49.2
62.0
72.0
3020
3535
3535
4040
4040
4545
4545
710
3
4
5
6
8
10*
x
x
x
x
x
x
7
7
7
10
10
10
33.2
39.1
50.2
62.3
71.0
80.0
3535
3535
4040
4545
4545
4545
800
3
4
5
6
8
10*
x
x
x
x
x
x
7
7
7
10
10
10
36.7
48.8
56.1
71.4
90.9
102.0
3535
4040
4040
4545
4545
4545
900
3
4
5
6
8
10*
x
x
x
x
x
x
7
7
7
10
10
10
46.8
60.0
74.8
81.5
110.0
126.0
3535
4040
4545
4545
4545
5050
1000
3
4
5
6
8
10*
x
x
x
x
x
x
7
7
7
10
10
10
56.5
66.5
80.5
90.0
132.0
147.0
4040
4040
4545
4545
5050
5050
Datum
diameter
dd
(mm)
No.
of
grooves
10
44
63
82
101
120
158
196
Taper bush
3030
3535
4040
4545
5050
35-75
35-90
40-100
55-110
70-125
No. of grooves z
Type
Weight
without
bush
( kg)
Taper
bush
Solid pulley
O Plate pulley (with or without lightening holes)
Spoked pulley
Material: EN-GJL 200 (GG 20)
DIN 1691
* Non stock item
Bore diameter d2 see page 65
53
Standard Range
optibelt KS V-Grooved Pulleys for Taper Bushes Grooves to DIN 2211
Section SPC/22
Datum
diameter
dd
(mm)
No.
of
grooves
Type
Weight
without
bush
( kg)
Taper
bush
200
3
4
5
6
4
4
4
4
9.0
10.5
14.0
17.0
2517
3020
3535
3535
212
3
4
5
6
4
4
4
4
10.0
12.5
15.0
18.0
3020
3020
3535
3535
2
3
4
5
6
8
4
4
4
4
4
4
8.1
11.0
14.0
16.2
19.0
24.9
3020
3020
3535
3535
3535
3535
3
4
5
6
8
4
4
4
4
4
12.0
17.2
19.1
20.8
25.5
3020
3535
3535
3535
3535
2
3
4
5
6
8
10*
4
4
4
4
4
4
4
9.8
14.5
20.7
22.8
26.0
29.7
34.0
3
4
5
6
8
O
O
O
O
8
9
9
9
9
3
4
5
6
8
10*
O
O
O
O
O
3
4
5
6
8
10*
O
O
O
O
224
236
250
265
280
300
Datum
diameter
dd
(mm)
No.
of
grooves
O
O
O
O
5
9
9
9
4
9
21.6
24.6
29.0
31.4
50.0
58.0
3535
3535
3535
3535
4040
4545
335
3
4
5
6
8
O
O
O
O
O
5
9
9
9
9
22.5
26.5
30.0
35.0
58.0
3535
3535
3535
3535
4040
355
3
4
5
6
8
10*
O
O
O
O
O
O
5
9
9
9
9
9
22.9
28.3
32.5
36.0
67.5
121.0
3535
3535
3535
3535
4040
4545
375
3020
3020
3535
3535
3535
3535
4040
3
4
5
6
8
O
O
O
O
O
5
9
9
9
9
23.8
30.0
33.0
45.5
68.0
3535
3535
3535
4040
4545
400
21.2
24.0
26.2
29.0
33.3
3535
3535
3535
3535
3535
3
4
5
6
8
10*
x
x
x
O
O
O
7
10
10
9
9
9
24.1
28.0
34.0
48.0
65.0
88.0
3535
3535
3535
4040
4545
5050
425
8
9
9
9
9
9
24.0
29.0
31.0
33.8
37.5
45.0
3535
3535
3535
3535
3535
4040
3
4
5
6
8
x
x
O
O
O
7
10
9
9
9
26.0
31.0
45.0
58.0
74.0
3535
3535
4040
4545
4545
450
5
9
9
9
4
9
21.0
25.0
28.5
29.0
46.5
53.5
3535
3535
3535
3535
4040
4545
3
4
5
6
8
10*
x
x
x
O
O
O
7
10
10
9
9
9
28.6
33.5
45.0
61.1
78.7
101.0
3535
3535
4040
4545
5050
5050
475
3
4
5
6
8
x
x
x
O
O
7
10
10
9
9
40.0
47.0
47.2
62.8
81.5
3535
3535
4040
4545
5050
10
85
110,5
136
161,5
212,5
263,5
Taper bush
2517
3020
3535
4040
4545
5050
16-60
25-75
35-90
40-100
55-110
70-125
54
Taper
bush
3
4
5
6
8
10*
Weight
without
bush
( kg)
315
No. of grooves z
Type
Solid pulley
O Plate pulley (with or without lightening holes)
Spoked pulley
Material: EN-GJL 200 (GG 20)
DIN 1691
* Non stock item
Bore diameter d2 see page 65
Standard Range
optibelt KS V-Grooved Pulleys for Taper Bushes Grooves to DIN 2211
Section SPC/22
Datum
diameter
dd
(mm)
No.
of
grooves
Type
Weight
without
bush
( kg)
Taper
bush
500
3
4
5
6
8
10*
x
x
x
x
O
O
7
10
10
10
9
9
30.9
39.0
48.7
60.2
87.4
127.0
3535
3535
4040
4545
5050
5050
560
3
4
5
6
8
10*
x
x
x
x
x
O
7
10
10
10
10
9
36.0
50.0
63.0
77.0
94.0
115.0
3535
4040
4545
5050
5050
5050
630
3
4
5
6
8
10*
x
x
x
x
x
O
7
7
10
10
10
9
48.5
61.0
77.0
86.0
105.5
130.0
4040
4545
5050
5050
5050
5050
710
3
4
5
6
8
10*
x
x
x
x
x
O
7
7
10
10
10
9
4040
4545
5050
5050
5050
5050
800
3
4
5
6
8
10*
x
x
x
x
x
O
7
7
10
10
10
9
4545
5050
5050
5050
5050
5050
1000
5
6
8
10*
x
x
x
O
10
10
10
9
5050
5050
5050
5050
1250
5
6
8
10*
x
x
x
O
10
10
10
9
5050
5050
5050
5050
No. of grooves z
Face width b2 (mm)
Datum
diameter
dd
(mm)
No.
of
grooves
10
85
110,5
136
161,5
212,5
263,5
Taper bush
3535
4040
4545
5050
35-90
40-100
55-110
70-125
Type
Weight
without
bush
( kg)
Taper
bush
Solid pulley
O Plate pulley (with or without lightening holes)
Spoked pulley
Material: EN-GJL 200 (GG 20)
DIN 1691
* Non stock item
Bore diameter d2 see page 65
55
Standard Range
optibelt KS V-Grooved Pulleys for Cylindrical Bore
Grooves according to DIN 2211
Section SPZ/10
No.
of
grooves
Type
Weight
( kg)
Finished
bore
dmax
(mm)
Distance
through hub
l
(mm)
Datum
diameter
dd
(mm)
No.
of
grooves
Type
Weight
( kg)
Finished
bore
dmax
(mm)
Distance
through hub
l
(mm)
45
1
2
3
O
O
O
0.23
0.30
0.40
16
16
16
24
35
35
132
1
2
3
O
O
O
0.81
1.30
1.62
30
38
40
24
35
40
50
1
2
3
O
O
O
0.30
0.40
0.50
20
20
20
24
35
40
140
1
2
3
O
O
O
0.92
1.40
1.69
28
38
38
24
38
40
56
1
2
3
O
O
O
0.32
0.45
0.65
20
25
25
24
35
40
150
1
2
3
x
O
O
1.05
1.50
1.85
28
38
38
24
38
40
63
1
2
3
O
O
O
0.34
0.60
0.85
25
25
25
24
35
40
160
1
2
3
x
x
x
1.22
1.60
2.40
32
38
42
30
38
40
71
1
2
3
O
O
O
0.34
0.62
1.00
25
25
30
24
35
40
170
1
2
3
x
x
x
1.66
1.85
3.00
40
40
42
30
38
40
75
1
2
3
O
O
O
0.35
0.64
1.05
24
24
28
24
35
40
180
1
2
3
x
x
x
2.10
3.05
3.50
32
38
42
30
38
40
80
1
2
3
O
O
O
0.35
0.65
1.10
25
30
38
24
35
35
190
1
2
3
x
x
x
2.25
2.35
4.00
35
35
35
30
38
40
85
1
2
3
O
O
O
0.30
0.70
1.10
25
30
38
24
35
35
200
1
2
3
x
x
x
2.40
2.85
4.45
32
38
42
38
38
40
90
1
2
3
O
O
O
0.38
0.75
1.15
25
30
38
24
35
38
212
1
2
3
x
x
x
2.60
3.40
5.00
35
35
38
30
38
40
95
1
2
3
O
O
O
0.40
0.83
1.20
28
28
38
24
35
38
225
1
2
3
x
x
x
2.80
4.00
5.30
32
38
42
38
38
40
100
1
2
3
O
O
O
0.48
0.90
1.25
28
30
38
24
35
38
250
1
2
3
x
x
x
3.30
4.80
6.00
32
38
42
38
38
40
106
1
2
3
O
O
O
0.50
0.96
1.32
30
28
38
24
35
38
280
1
2
3
x
x
x
3.85
5.20
7.00
35
42
48
34
38
40
112
1
2
3
O
O
O
0.54
1.00
1.40
28
30
38
24
35
38
315
1
2
3
x
x
x
4.35
6.80
8.25
35
42
48
34
38
40
118
1
2
3
O
O
O
0.60
1.10
1.47
28
38
38
24
35
38
355
1
2
3
x
x
x
4.60
8.00
10.00
35
42
48
34
40
45
125
1
2
3
O
O
O
0.70
1.20
1.55
28
30
38
24
35
40
Datum
diameter
dd
(mm)
No. of grooves z
Face width b2 (mm)
56
16
28
40
Solid pulley
O Plate pulley (with or without lightening holes)
Spoked pulley
Hub position: flush one side
Material: EN-GJL 200 (GG 20) - DIN 1691
Standard Range
optibelt KS V-Grooved Pulleys for Cylindrical Bore
Grooves according to DIN 2211
Section SPA/13
No.
of
grooves
Type
Weight
( kg)
Finished
bore
dmax
(mm)
Distance
through hub
l
(mm)
Datum
diameter
dd
(mm)
Type
Weight
( kg)
Finished
bore
dmax
(mm)
Distance
through hub
l
(mm)
50
1
2
3
O
O
O
0.34
0.48
0.55
18
18
18
34
49
47
106
1
2
3
4h
5h
O
O
O
O
O
0.88
1.65
2.20
3.24
3.85
28
28
32
32
35
34
49
42
53
60
56
1
2
3
O
O
O
0.42
0.62
0.74
20
20
20
34
49
47
112
34
49
47
60
70
1
2
3
4h
5h
O
O
O
O
O
1.09
1.75
2.38
3.37
3.95
28
38
38
42
42
34
49
42
53
60
1
2
3
4h
5h
O
O
O
O
O
0.52
0.77
0.85
1.23
1.48
25
25
25
25
25
118
25
28
32
32
32
34
49
42
60
70
1
2
3
4h
5h
O
O
O
O
O
1.10
1.80
2.42
3.42
4.10
32
38
42
42
48
34
49
42
53
65
1
2
3
4h
5h
O
O
O
O
O
0.50
0.89
0.96
1.47
1.83
125
0.53
1.02
1.08
1.76
1.92
24
24
24
24
28
34
49
42
60
82
1
2
3
4h
5h
O
O
O
O
O
1.38
1.90
2.55
3.49
4.40
32
38
42
42
48
34
49
42
53
65
1
2
3
4h
5h
O
O
O
O
O
80
132
O
O
O
O
O
0.56
1.04
1.19
1.89
2.00
28
32
38
38
38
34
49
42
60
55
1
2
3
4h
5h
O
O
O
O
O
1.45
2.20
2.58
3.58
4.75
32
38
42
42
48
34
49
42
53
65
1
2
3
4h
5h
85
140
1
2
3
4h
5h
O
O
O
O
O
0.64
1.20
1.40
1.98
2.20
24
28
28
28
32
34
49
42
53
55
1
2
3
4h
5h
O
O
O
O
O
1.52
2.33
2.63
3.65
4.95
32
38
42
42
48
34
49
42
53
65
150
90
1
2
3
4h
5h
O
O
O
O
O
0.88
1.47
1.62
2.22
2.51
28
32
38
42
42
34
49
42
53
67
1
2
3
4h
5h
x
x
O
O
O
1.60
2.59
2.95
4.04
5.15
38
38
42
42
48
36
49
42
53
65
160
95
1
2
3
4h
5h
O
O
O
O
O
0.76
1.57
1.89
2.47
2.75
28
28
28
32
35
34
49
42
53
67
1
2
3
4h
5h
x
x
x
O
O
1.75
2.40
2.80
3.62
5.45
38
38
42
48
48
36
49
42
60
70
170
100
1
2
3
4h
5h
O
O
O
O
O
0.84
1.36
1.98
2.72
3.10
28
32
38
42
42
34
49
52
53
60
1
2
3
4h
5h
x
x
x
x
x
2.00
2.90
3.20
4.20
5.80
35
35
35
35
38
36
49
42
60
70
Datum
diameter
dd
(mm)
63
71
75
No. of grooves z
Face width b2 (mm)
No.
of
grooves
h dd + 4 mm
20
35
50
65
80
Solid pulley
O Plate pulley (with or without lightening holes)
Spoked pulley
Hub position: flush one side
Material: GG 20 DIN 1691
57
Standard Range
optibelt KS V-Grooved Pulleys for Cylindrical Bore
Grooves according to DIN 2211
Section SPA/13
Datum
diameter
dd
(mm)
No.
of
grooves
Type
Weight
( kg)
Finished
bore
dmax
(mm)
Distance
through hub
l
(mm)
Datum
diameter
dd
(mm)
No.
of
grooves
Weight
( kg)
Finished
bore
dmax
(mm)
Distance
through hub
l
(mm)
180
1
2
3
4h
5h
x
x
x
x
x
2.02
3.15
3.60
4.65
6.13
38
42
42
48
48
36
49
42
60
70
315
1
2
3
4h
5h
x
x
x
x
x
4.78
6.60
8.75
11.80
12.50
48
48
55
55
60
44
53
47
60
70
190
1
2
3
4h
5h
x
x
x
x
x
2.02
3.20
4.00
5.24
6.31
38
42
42
48
48
36
49
42
60
70
355
1
2
3
4h
5h
x
x
x
x
x
5.50
7.70
9.55
11.80
12.85
48
55
55
55
60
44
53
47
60
70
200
1
2
3
4h
5h
x
x
x
x
x
2.40
2.85
4.21
4.95
6.45
38
42
48
55
60
36
49
42
60
70
400
1h
2h
3h
4h
5h
x
x
x
x
x
6.85
8.80
10.95
12.40
15.90
50
55
60
60
60
50
53
47
67
82
212
1
2
3
4h
5h
x
x
x
x
x
2.70
3.40
4.40
5.68
6.85
40
42
42
42
42
36
49
42
60
70
450
1h
2h
3h
4h
5h
x
x
x
x
x
7.50
9.40
12.15
14.20
18.30
55
55
60
65
65
50
53
47
67
82
225
1
2
3
4h
5h
x
x
x
x
x
2.75
3.87
4.60
6.50
7.25
40
42
42
42
42
36
49
42
60
70
500
1h
2h
3h
4h
5h
x
x
x
x
x
10.50
10.70
13.45
16.25
22.80
55
55
60
65
65
50
55
60
67
82
236
1
2
3
4h
5h
x
x
x
x
x
3.30
4.10
4.90
6.20
7.50
38
42
48
55
55
36
49
42
60
70
560
1h
2h
3h
4h
5h
x
x
x
x
x
14.00
13.10
15.60
19.40
24.50
55
55
60
65
65
60
60
74
67
82
250
1
2
3
4h
5h
x
x
x
x
x
3.40
4.32
5.30
7.00
7.85
42
48
48
55
60
36
49
42
60
70
280
1
2
3
4h
5h
x
x
x
x
x
3.90
5.35
6.50
8.52
9.90
42
48
48
55
60
44
53
47
60
70
300
1
2
3
4h
5h
x
x
x
x
x
4.25
5.90
7.50
9.82
11.30
48
48
55
55
60
44
53
47
60
70
h dd + 4 mm
No. of grooves z
Face width b2 (mm)
58
Type
h dd + 4 mm
20
35
50
67
82
Solid pulley
O Plate pulley (with or without lightening holes)
Spoked pulley
Hub position: flush one side
Material: GG 20 DIN 1691
Standard Range
optibelt KS V-Grooved Pulleys for Cylindrical Bore
Grooves according to DIN 2211
Section SPB/17
No.
of
grooves
Type
Weight
( kg)
Finished
bore
dmax
(mm)
Distance
through hub
l
(mm)
56
1
2
3
O
O
O
0.61
1.00
1.00
20
20
22
41
60
62
63
1
2
3
O
O
O
0.76
1.20
1.20
20
20
22
41
60
62
71
1
2
3
O
O
O
0.79
1.31
1.60
22
22
22
41
60
55
75
1
2
3
O
O
O
0.82
1.42
1.85
25
25
25
41
60
62
80
1
2
3
4h
5h
O
O
O
O
O
1.03
1.65
2.05
2.40
2.73
28
28
28
28
28
41
60
55
70
80
85
1
2
3
4h
5h
O
O
O
O
O
1.10
1.70
2.15
2.70
3.00
30
30
30
30
30
41
60
55
70
75
90
1
2
3
4h
5h
O
O
O
O
O
1.17
1.80
2.30
3.05
3.30
32
38
38
38
38
41
60
55
70
75
95
1
2
3
4h
5h
O
O
O
O
O
1.25
2.00
2.50
2.90
3.60
35
38
38
38
38
41
60
67
70
75
1
2
3
4h
5h
6h
O
O
O
O
O
O
1.32
2.11
2.85
3.81
4.45
5.20
32
38
38
38
38
38
41
60
55
70
75
124
1
2
3
4h
5h
6h
O
O
O
O
O
O
1.45
2.00
3.00
4.30
5.10
6.00
28
28
30
30
32
32
41
60
55
70
75
124
Datum
diameter
dd
(mm)
100
106
No. of grooves z
Face width b2 (mm)
Datum
diameter
dd
(mm)
No.
of
grooves
Type
Weight
( kg)
Finished
bore
dmax
(mm)
Distance
through hub
l
(mm)
112
1
2
3
4h
5h
6h
O
O
O
O
O
O
1.53
2.35
3.10
4.75
5.61
6.15
32
38
38
42
42
42
41
60
55
67
75
85
118
1
2
3
4h
5h
6h
O
O
O
O
O
O
1.57
2.43
3.20
6.20
7.20
6.60
32
38
42
42
42
42
41
60
55
70
75
85
125
1
2
3
4h
5h
6h
O
O
O
O
O
O
1.66
2.55
3.28
4.74
8.60
8.00
32
38
42
42
42
48
41
60
55
70
75
85
132
1
2
3
4h
5h
6h
O
O
O
O
O
O
1.88
2.63
3.49
6.30
9.40
8.50
30
30
42
42
42
42
41
60
55
70
75
85
140
1
2
3
4h
5h
6h
O
O
O
O
O
O
2.10
2.90
3.90
6.92
7.58
11.40
32
38
42
42
48
48
41
60
55
70
75
85
150
1
2
3
4h
5h
6h
O
O
O
O
O
O
2.43
3.24
4.28
6.76
8.43
12.10
32
38
42
42
48
48
43
48
60
70
75
85
160
1
2
3
4h
5h
6h
x
x
x
O
O
O
2.50
3.32
4.60
7.01
9.35
12.85
38
42
48
48
48
55
43
48
60
70
75
85
170
1
2
3
4h
5h
6h
x
x
x
O
O
O
2.85
3.44
4.89
7.20
8.90
13.10
42
42
42
48
48
48
43
48
60
70
75
85
h dd + 5,5 mm
25
44
63
86
105
124
Solid pulley
O Plate pulley (with or without lightening holes)
Spoked pulley
Hub position: flush one side
Material: GG 20 DIN 1691
59
Standard Range
optibelt KS V-Grooved Pulleys for Cylindrical Bore
Grooves according to DIN 2211
Section SPB/17
Datum
diameter
dd
(mm)
No.
of
grooves
Type
Weight
( kg)
Finished
bore
dmax
(mm)
Distance
through hub
l
(mm)
Datum
diameter
dd
(mm)
No.
of
grooves
Type
Weight
( kg)
Finished
bore
dmax
(mm)
Distance
through hub
l
(mm)
180
1
2
3
4h
5h
6h
x
x
x
x
O
O
3.10
3.90
5.28
7.42
9.05
10.80
38
42
48
48
55
60
43
48
60
70
75
85
315
1
2
3
4h
5h
6h
x
x
x
x
x
x
6.40
8.22
12.90
13.00
17.60
20.60
48
55
55
60
65
75
49
55
67
80
80
90
190
1
2
3
4h
5h
6h
x
x
x
x
O
O
3.19
4.22
5.49
7.69
9.22
11.95
42
42
42
48
50
55
43
48
60
70
75
85
355
1
2
3
4h
5h
6h
x
x
x
x
x
x
7.00
9.70
13.40
18.25
18.75
19.75
48
55
55
60
65
75
49
55
67
80
75
90
200
1
2
3
4h
5h
6h
x
x
x
x
O
O
3.40
4.45
5.85
7.98
9.50
12.20
38
42
48
50
55
60
43
48
60
60
80
90
400
1h
2h
3h
4h
5h
6h
x
x
x
x
x
x
8.46
10.00
14.30
18.50
22.50
28.00
50
55
60
65
70
75
49
55
67
80
85
90
212
1
2
3
4h
5h
6h
x
x
x
x
x
O
3.75
4.66
6.15
7.70
10.30
13.51
42
42
48
50
50
55
43
48
60
70
80
90
450
1h
2h
3h
4h
5h
6h
x
x
x
x
x
x
9.86
10.87
15.05
20.50
26.00
28.90
50
55
60
65
70
75
55
55
67
80
80
90
225
1
2
3
4h
5h
6h
x
x
x
x
O
O
4.00
5.40
6.90
8.64
11.72
14.75
42
42
48
55
50
55
43
48
60
70
90
90
500
1h
2h
3h
4h
5h
6h
x
x
x
x
x
x
10.70
13.70
15.20
21.30
30.00
33.80
50
60
65
70
75
80
55
59
67
80
80
90
250
1
2
3
4h
5h
6h
x
x
x
x
x
x
4.20
6.10
8.60
9.70
13.20
17.00
42
48
55
60
65
65
43
55
60
70
80
90
560
2h
3h
4h
5h
6h
x
x
x
x
x
15.00
24.20
26.20
34.40
39.00
60
65
70
75
80
55
67
80
80
90
280
1
2
3
4h
5h
6h
x
x
x
x
x
x
5.70
7.04
9.67
11.52
15.50
18.00
48
48
55
60
65
65
49
55
60
70
80
90
630
2h
3h
4h
5h
6h
x
x
x
x
x
20.20
27.00
30.80
37.20
44.00
60
65
75
80
90
80
80
86
90
100
300
1
2
3
4h
5h
6h
x
x
x
x
x
x
5.90
7.50
10.50
12.40
15.40
18.25
48
48
55
60
65
70
49
55
67
80
80
90
h dd + 5,5 mm
No. of grooves z
Face width b2 (mm)
60
25
44
63
86
105
124
Solid pulley
O Plate pulley (with or without lightening holes)
Spoked pulley
Hub position: flush one side
Material: GG 20 DIN 1691
Standard Range
optibelt KS V-Grooved Pulleys for Cylindrical Bore
Grooves according to DIN 2211
Section SPC/22
No.
of
grooves
Type
Weight
( kg)
Finished
bore
dmax
(mm)
Distance
through hub
l
(mm)
Datum
diameter
dd
(mm)
180
1
2
3
4
5
6
O
O
O
O
O
O
4.20
7.20
10.40
10.50
18.00
23.70
40
50
55
55
60
65
54
64
90
95
100
115
200
1
2
3
4
5
6
O
O
O
O
O
O
4.80
7.80
10.60
11.20
15.40
27.00
40
50
55
60
65
70
54
64
90
95
100
125
1
2
3
4
5
6
x
x
x
x
x
x
5.50
7.80
10.60
13.10
16.70
35.00
48
52
52
55
60
60
54
64
90
95
100
115
250
1
2
3
4
5
6
x
x
x
x
x
x
7.30
8.80
11.10
15.30
19.00
23.70
52
52
65
70
75
60
54
64
90
95
100
115
280
1
2
3
4
5
x
x
x
x
x
8.70
10.90
15.60
17.50
20.50
52
55
70
75
75
54
64
90
95
100
315
1
2
3
4
5
6
x
x
x
x
x
x
9.10
13.00
17.10
20.00
24.70
31.20
52
55
70
75
80
85
54
74
90
95
100
115
335
2
3
4
5
6
x
x
x
x
x
14.00
18.30
22.40
28.30
34.40
55
55
60
65
75
74
90
95
100
115
355
2
3
4
5
6
x
x
x
x
x
15.20
19.20
25.80
32.00
36.20
60
70
70
75
75
74
90
95
100
115
400
3
4
5
x
x
x
20.60
28.00
32.00
70
70
75
90
105
100
Datum
diameter
dd
(mm)
225
No. of grooves z
Face width b2 (mm)
No.
of
grooves
Type
Weight
( kg)
Finished
bore
dmax
(mm)
Distance
through hub
l
(mm)
450
2
3
4
5
6
x
x
x
x
x
21.10
26.30
31.10
42.20
48.50
70
75
75
80
80
80
90
105
110
120
500
3
4
5
6
x
x
x
x
28.40
34.10
48.20
52.50
75
75
80
80
90
105
110
120
560
3
4
5
6
x
x
x
x
31.10
39.00
54.10
61.50
75
75
85
85
90
105
110
120
630
3
4
5
6
x
x
x
x
38.50
48.10
62.20
73.20
80
80
85
85
90
105
110
120
38
64
90
116
142
168
Solid pulley
O Plate pulley (with or without lightening holes)
Spoked pulley
Hub position: flush one side
Material: GG 20 DIN 1691
61
Standard Range
optibelt RE Variable Speed Pulleys
D
(mm)
Finished
bore
dmax
(mm)
B
(mm)
R 083-1
83
40
26
R 093-1
93
45
R 108-1
108
R 121-1
Section
dd min
(mm)
dd max
(mm)
Variation
factor
Weight
( kg)
48
SPZ
Z/10
63
57
79
77
1.25
1.35
0.90
28
48
SPZ
SPA
Z/10
A/13
67
66
61
60
89
87
87
85
1.33
1.32
1.43
1.42
1.03
50
28
48
SPZ
SPA
Z/10
A/13
79
81
73
75
94
102
93
100
1.19
1.26
1.27
1.33
1.65
121
55
28
48
SPZ
SPA
Z/10
A/13
92
94
86
88
107
115
106
113
1.16
1.22
1.23
1.28
1.75
R 138-1
138
55
38
48
SPZ
SPA
SPB
Z/10
A/13
B/17
109
111
116
103
105
109
124
132
131
123
130
128
1.14
1.19
1.13
1.19
1.24
1.17
2.60
R 160-1
160
80
52
48
SPZ
SPA
SPB
Z/10
A/13
B/17
119
121
126
113
115
119
134
143
153
133
141
150
1.13
1.18
1.21
1.18
1.23
1.26
4.50
R 180-1
180
80
52
48
SPA
SPB
A/13
B/17
141
146
135
139
163
173
161
170
1.16
1.18
1.19
1.22
5.40
Designation
62
Material: AL
Al = Aluminium
Standard Range
optibelt RE Variable Speed Pulleys
D
(mm)
Finished
bore
dmax
(mm)
B
(mm)
R 083-2
83
40
26
R 093-2
93
45
R 108-2
108
R 121-2
Material: Al
Section
dd min
(mm)
dd max
(mm)
Variation
factor
Weight
( kg)
76
SPZ
Z/10
63
57
79
77
1.25
1.35
1.50
28
76
SPZ
SPA
Z/10
A/13
67
66
61
60
89
87
87
85
1.33
1.32
1.43
1.42
1.75
50
28
76
SPZ
SPA
Z/10
A/13
79
81
73
75
94
102
93
100
1.19
1.26
1.27
1.33
2.15
121
55
28
76
SPZ
SPA
Z/10
A/13
92
94
86
88
107
115
106
113
1.16
1.22
1.23
1.28
2.70
R 138-2
138
55
38
76
SPZ
SPA
SPB
Z/10
A/13
B/17
109
111
116
103
105
109
124
132
131
123
130
128
1.14
1.19
1.13
1.19
1.24
1.17
4.50
R 160-2
160
80
52
90
SPZ
SPA
SPB
Z/10
A/13
B/17
119
121
126
113
115
119
134
143
153
133
141
150
1.13
1.18
1.21
1.18
1.23
1.26
7.50
R 180-2
180
80
52
90
SPA
SPB
A/13
B/17
141
146
135
139
163
173
161
170
1.16
1.18
1.19
1.22
9.20
Designation
Al = Aluminium
63
Standard Range
optibelt RE Variable Speed Pulleys
Finished
bore
dmax
(mm)
B
(mm)
Section
dd min
(mm)
Taper
bush
Designation
TB-R 092-1
92
46
25
31
SPZ
Z/10
60
55
89
88
1.48
1.60
0.85
1008
TB-R 108-1
108
50
28
35
SPZ
SPA
Z/10
A/13
B/17
75
76
68
70
87
93
102
92
100
97
1.24
1.34
1.35
1.43
1.11
1.20
1108
TB-R 120-1
120
55
28
35
SPZ
SPA
Z/10
A/13
B/17
87
88
80
82
98
105
114
104
112
108
1.20
1.29
1.30
1.36
1.10
1.50
1108
TB-R 138-1
138
65
32
38
SPZ
SPA
Z/10
A/13
B/17
105
106
98
100
116
123
132
122
130
126
1.17
1.24
1.24
1.30
1.09
2.20
1215
TB-R 159-1
159
75
42
39
SPZ
SPA
Z/10
A/13
B/17
126
128
122
128
125
144
154
152
152
148
1.14
1.20
1.24
1.18
1.18
3.50
1615
TB-R 180-1
180
75
42
45
SPZ
SPA
SPB
Z/10
A/13
B/17
133
134
137
128
128
132
151
160
173
151
158
170
1.14
1.19
1.26
1.17
1.23
1.29
4.20
1615
1008
1108
1215
1615
10-25
10-28
11-32
14-42
Variation
factor
Weight
without
bush
( kg)
DA
(mm)
Taper bush
64
dd max
(mm)
Material: GG
GG = cast iron
Rights to technical modification reserved.
Bore diameter d2 see page 65
Standard Range
optibelt TB Taper Bushes
Taper bushes with metrical bore, grooves according to DIN 6885 Part 1
Taper bush
1008 1108 1210 1215 1310 1610 1615 2012 2517 3020 3030 3525 3535 4040 4545 5050
10
11
12
14
16
18
19
20
22
24G
25G
Bore
diameter d2
(mm)
5.7
C torque (Nm)
10
11
12
14
16
18
19
20
22
24
25
28G
11
12
14
16
18
19
20
22
24
25
28
30
32
5.7
20
11
12
14
16
18
19
20
22
24
25
28
30
32
20
14
16
18
19
20
22
24
25
28
30
32
35
20
14
16
18
19
20
22
24
25
28
30
32
35
38
40
42G
20
14
16
18
19
20
22
24
25
28
30
32
35
38
40
42G
20
14
16
18
19
20
22
24
25
28
30
32
35
38
40
42
45
48
50
16
18
19
20
22
24
25
28
30
32
35
38
40
42
45
48
50
55
60
25
28
30
32
35
38
40
42
45
48
50
55
60
65
70
75
31
49
92
35
38
40
42
45
48
50
55
60
65
70
75
35
38
40
42
45
48
50
55
60
65
70
75
80
85
90
35
38
40
42
45
48
50
55
60
65
70
75
80
85
90
40
42
45
48
50
55
60
65
70
75
80
85
90
95
100
55
60
65
70
75
80
85
90
95
100
105
110
70
75
80
85
90
95
100
105
110
115
120
125
Material: GG 20
92
115
115
172
195
275
22.3 22.3 25.4 38.1 25.4 25.4 38.1 31.8 44.5 50.8 76.2 63.5 88.9 101.6 114.3 127.0
0.12 0.16 0.28 0.39 0.32 0.41 0.60 0.75 1.06 2.50 3.75 3.90 5.13 7.68 12.70 15.17
Groove width
b (mm)
Groove depth
Bore diameter
t2 (mm)
d2 (mm)
Groove width
b (mm)
Groove depth
d2 (mm)
24
25
8
8
2.0
1.3
28
42
28
12
2.0
2.2
t2 (mm)
Taper bushes with inch bore, grooves according to British Standard BS 46 Part 1
Taper bush
1008 1108 1210 1215 1310 1610 1615 2012 2517 3020 3030 3525 3535 4040 4545 5050
Bore
diameter d2
(inch)
3 /8*
3 /8*
1 /2
5 /8*
1 /2*
1/2
5/8
5/8
3 /4
7 /8
3 /4*
3/4
1/2
3/4
7/8
1G
1/2
3/4
7/8
5 /8
7 /8
1
1
11 /8
11/8G* 11/4
3 /4
1
11 /8
11 /4
5 /8*
7 /8*
1*
11 /8
11 /4
13 /8
5/8
7/8
1
11/8
11/4
13/8
11/2
15/8
1 /2
5/8*
3/4
3 /4
7 /8
1
11 /8
11 /4
13 /8
11 /2
15 /8
13 /4
17 /8
2
21 /8
21 /4
23 /8
21 /2
5 /8
7/8 *
3 /4
1
1
11 /8
11/8 11/4
11/4 13/8
13/8 11/2
11/2 15/8
15/8G* 13/4
17 /8
2
7/8
11/4
13/8
11/2
15/8
13 /4 *
17/8
2
21 /8 *
21/4
23/8
21/2
25/8
23/4
27/8
3
11/4
13/8
11/2
15/8
13 / 4 *
17/8
2
21 / 8 *
21/4
23/8
21/2
25 /8 *
23 /4 *
27/8
3
11 /2 11 /2
15 /8 15 /8
13 /4 13 /4
17 /8 17 /8
2
2
21 /8 21 /8
21 /4 21 /4
23 /8 23 /8
21 /2 21 /2
25 /8 25 /8
23 /4 23 /4
27 /8 27 /8
3
3
31 /8 31 /8
31 /4 31 /4
33 /8 33 /8
31 /2 G 31 /2 G
13 / 4 * 21 / 4 *
17 / 8 * 23 / 8 *
2* 21/2*
21 / 8 * 23 / 4 *
21 / 4 * 27 / 8 *
23/8* 3*
21 / 2 * 31 / 4 *
25 / 8 * 33 / 8 *
23 / 4 * 31 / 2 *
27 / 8 * 33 / 4 *
3*
4*
31/8* 41/4G*
31/4* 41/2G*
33 /8 *
31 /2 *
33/4G*
4G *
3*
31/4*
31/2*
33/4*
4*
41/4*
41/2*
43/4*
5G *
Material: GG 20
5.7
5.7
20
20
20
20
20
31
49
92
92
115
115
172
195
275
22.3 22.3 25.4 38.1 25.4 25.4 38.1 31.8 44.5 50.8 76.2 63.5 88.9 101.6 114.3 127.0
0.12 0.16 0.28 0.39 0.32 0.41 0.60 0.75 1.06 2.50 3.75 3.90 5.13 7.68 12.70 15.17
65
Design Calculation
Abbreviations used in Formulae
a
(mm)
(mm)
LdSt
Ldth
(mm)
ng
(rpm)
nk
(rpm)
n1
(rpm)
n2
(rpm)
(kW*)
PB
= design power
(kW*)
PN
(kW*)
Sa
(N)
(N)
= belt speed
(m/s)
(mm)
(mm)
bd
= datum width
b1
= top width
c1
c2
= service factor
c3
c4
= number of idlers
ddg
(mm)
ddk
(mm)
dd1
(mm)
dd2
(mm)
(mm)
Ea
(mm)
= number of belts
(N)
= flex rate
fB
i
= drive ratio
= span length
(mm)
LiSt
(mm)
Lith
(mm)
(sec-1)
2
= arc of contact on small pulley
(mm)
(degrees)
(degrees)
* 1 kW = 1kNm/s
The terms pitch diameter (dw), pitch length (Lw) and pitch circumference (Uw) used previously have been changed
to datum diameter (dd), datum length (Ld) and datum circumference (Ud), in order to bring them into line with
current Standard terminology.
66
Design Calculation
Optibelt Nominal Power Rating PN Arc of Contact Correction Factor c1
The Optibelt nominal power ratings PN in Tables 25 to 48 are
based upon an internationally recognised basic formula and a
theoretical belt life of 25,000 hours ander ideal conditions. This
formula contains material constants that take into account the
quality of the raw materials used and make allowances for
production methods. The special qualities of Optibelt V-belts made
it possible for example to use other material constants than those
given in DIN Standards. As a result, the nominal Optibelt power
ratings PN significantly exceed the ratings given, for wedge belts
in BS 3790 and DIN 7753 Part 2 and for classical V-belts in BS
3790 and DIN 2218, for the same theoretical belt life. The nominal
power ratings PN are based on the smallest loaded pulley in the
drive system. The belt power rating value PN is calculated taking
into account
the datum diameter of the smaller pulley ddk
the speed of the smaller pulley nk
the drive ratio i
an assumed arc of contact at the smaller pulley of = 180
a reference belt length for the specific belt section.
In order to account for the true drive data, based on the arc of
contact and the belt lengths employed, correction factors for the arc
of contact c1 and length c3 have been introduced.
If required, drive calculations can be provided for any theoretical
belt life.
Intermediate values for nominal power rating, arc of contact and
length correction factors can be foand by linear interpolation.
The factor c1 corrects the power rating PN when the arc of contact
is smaller than 180, as the PN value was calculated on the arc of
contact = 180 on the smaller pulley.
Table 16
ddg ddk
anom
c1
0
0.05
0.10
0.15
0.20
180
177
174
171
168
1.00
1.00
1.00
1.00
0.99
0.25
0.30
0.35
0.40
0.45
165
162
160
156
153
0.99
0.99
0.99
0.99
0.98
0.50
0.55
0.60
0.65
0.70
150
147
144
141
139
0.98
0.98
0.98
0.97
0.97
0.75
0.80
0.85
0.90
0.95
136
133
130
126
123
0.97
0.96
0.96
0.96
0.95
1.00
1.05
1.10
1.15
1.20
119
115
112
109
106
0.94
0.94
0.93
0.93
0.92
1.25
1.30
1.35
1.40
1.45
103
100
96
92
88
0.91
0.91
0.90
0.88
0.87
1.50
1.55
1.60
84
80
77
0.86
0.84
0.83
67
Design Calculation
Service Factor c2
The service factor c2 takes account of the daily operating time and
of the type of driver and driven machine. It applies exclusively to
two-pulley drives. Other arrangements such as drives with tension
and guide idlers have not been taken into consideration. Pages
114-116 provide the relevant basic design guidelines for drives
with more than two pulleys.
Adverse operating conditions (e.g. aggressive dust, particularly high ambient temperatures or the effects of various media)
have not been taken into account. As it is practically impossible
to cover every conceivable combination of driver/driven machine/operating conditions in a summary that complies with the
relevant standards, the service factors are approximate
values.
Table 17
Service factor c2
for daily operation time of (hours)
over 10 below 16
over 16
up to 10
Service factor c2
for daily operation time of (hours)
up to 10
over 10 below 16
over 16
Light drives
Centrifugal pumps and compressors,
belt conveyors (lightweight materials),
fans and pumps up to 7.5 kW
1.1
1.1
1.2
1.1
1.2
1.3
1.1
1.2
1.3
1.2
1.3
1.4
1.2
1.3
1.4
1.4
1.5
1.6
1.3
1.4
1.5
1.5
1.6
1.8
Medium drives
Plate cutters, presses, chain and belt
conveyors (heavy materials), screen vibrators, generators and exciters, bakery
machinery, machine tools (lathes and
grinders), laundry machinery, printing
machines, fans and pumps over 7.5 kW
Design Calculation
Length Factor c3 for optibelt Wedge Belts and Kraftbands
The length factor c3 takes into account the flex rate of the belt based
on the reference length for the particular belt section.
c3 > 1.0
c3 = 1.0
c3 < 1.0
Table 18
Section SPZ, XPZ
Datum length
(mm)
c3
Datum length
(mm)
c3
Datum length
(mm)
c3
630
670
710
750
800
0.83
0.84
0.85
0.86
0.87
800
850
900
950
1000
0.81
0.82
0.83
0.84
0.85
1250
1320
1400
1500
1600
0.83
0.84
0.85
0.86
0.87
850
900
950
1000
1060
0.88
0 89
0.90
0.91
0.92
1060
1120
1180
1250
1320
0.86
0.86
0.87
0.88
0.89
1700
1800
1900
2000
2120
0.88
0.89
0.90
0.91
0.92
1120
1180
1250
1320
1400
0.93
0.94
0.95
0.96
0.98
1400
1500
1600
1700
1800
0.90
0.91
0.92
0.93
0.94
2240
2360
2500
2650
2800
0.93
0.93
0.94
0.95
0.96
1500
1600
1700
1800
1900
0.99
1.00
1.01
1.02
1.03
1900
2000
2120
2240
2360
0.95
0.96
0.97
0.98
0.99
3000
3150
3350
3550
3750
0.97
0.98
0.99
1.00
1.01
2000
2120
2240
2360
2500
1.04
1.05
1.06
1.07
1.08
2500
2650
2800
3000
3150
1.00
1.01
1.02
1.03
1.04
4000
4250
4500
4700
5000
1.02
1.03
1.04
1.04
1.05
2650
2800
3000
3150
3350
1.09
1.10
1.11
1.12
1.13
3350
3550
3750
4000
4250
1.05
1.06
1.07
1.08
1.09
5300
5600
6000
6300
6700
1.06
1.07
1.08
1.09
1.10
3550
3750
4000
4250
4500
1.15
1.16
1.17
1.18
1.19
4500
4750
5000
5300
5600
1.10
1.11
1.12
1.13
1.14
7100
7500
8000
8500
9000
1.11
1.12
1.13
1.14
1.15
6000
1.15
9500
10000
1.16
1.17
c3
2000
2120
2240
2360
2500
2650
2800
3000
3150
3350
0.85
0.86
0.86
0.87
0.88
0.89
0.90
0.91
0.91
0.92
3550
3750
4000
4250
4500
0.93
0.94
0.95
0 96
0.97
4750
5000
5300
5600
6000
0.98
0.98
0.99
1.00
1.01
6300
6700
7100
7500
8000
1.02
1.03
1.04
1.04
1.05
8500
9000
9500
10000
10600
1.06
1.07
1.08
1.09
1.09
11200
11800
12500
13200
14000
1.10
1.11
1.12
1.13
1.14
15000
1.15
69
Design Calculation
Length Factor c3 for optibelt Wedge Belts and Kraftbands
Table 19
Section 3V/9N, 3VX/9NX
3V/9J, 3VX/9JX
Belt
designation
70
Outside length
(mm)
c3
Outside length
(mm)
c3
Section 8V/25N
8V/25J
Belt
designation
Outside length
(mm)
c3
3V
3V
3V
3V
3V
265
280
300
315
335
673
711
762
800
851
0.84
0.85
0.86
0.87
0.88
5V
5V
5V
5V
5V
500
530
560
600
630
1270
1346
1422
1524
1600
0.84
0.85
0.85
0.87
0.87
8V
8V
8V
8V
8V
1000
1060
1120
1180
1250
2540
2692
2845
2997
3175
0.87
0.87
0 88
0.89
0.90
3V
3V
3V
3V
3V
355
375
400
425
450
902
952
1016
1079
1143
0.90
0.91
0.92
0.93
0.94
5V
5V
5V
5V
5V
670
710
750
800
850
1702
1803
1905
2032
2159
0.88
0.89
0.90
0.91
0.92
8V
8V
8V
8V
8V
1320
1400
1500
1600
1700
3353
3556
3810
4064
4318
0.91
0.92
0.93
0.93
0.94
3V
3V
3V
3V
3V
475
500
530
560
600
1206
1270
1346
1422
1524
0.95
0.96
0.97
0.98
0.99
5V 900
5V 950
5V 1000
5V 1060
5V 1120
2286
2413
2540
2692
2845
0.93
0.94
0.95
0.96
0.96
8V
8V
8V
8V
8V
1800
1900
2000
2120
2240
4572
4826
5080
5385
5690
0.95
0.96
0.97
0.98
0.98
3V
3V
3V
3V
3V
630
670
710
750
800
1600
1702
1803
1905
2032
1.00
1.01
1.02
1.03
1.04
5V
5V
5V
5V
5V
1180
1250
1320
1400
1500
2997
3175
3353
3556
3810
0.97
0.98
0.99
1.00
1.01
8V
8V
8V
8V
8V
2360
2500
2650
2800
3000
5994
6350
6731
7112
7620
0.99
1.00
1.01
1.02
1.03
3V 850
3V 900
3V 950
3V 1000
3V 1060
2159
2286
2413
2540
2692
1.05
1.07
1.07
1.08
1.09
5V
5V
5V
5V
5V
1600
1700
1800
1900
2000
4064
4318
4572
4826
5080
1.02
1.03
1.04
1.05
1.06
8V
8V
8V
8V
8V
3150
3350
3550
3750
4000
8001
8509
9017
9525
10160
1.03
1.04
1.05
1.06
1.07
3V
3V
3V
3V
3V
1120
1180
1250
1320
1400
2845
2997
3175
3353
3556
1.11
1.11
1.13
1.14
1.15
5V
5V
5V
5V
5V
2120
2240
2360
2500
2650
5385
5690
5994
6350
6731
1.07
1.07
1.08
1.09
1.10
8V
8V
8V
8V
8V
4250
4500
4750
5000
5300
10795
11430
12065
12700
13462
1.08
1.09
1.09
1.10
1.11
3V
3V
3V
3V
3V
1500
1600
1700
1800
1900
3810
4064
4318
4572
4826
1.16
1.17
1.18
1.19
1.20
5V
5V
5V
5V
5V
2800
3000
3150
3350
3550
7112
7620
8001
8509
9017
1.11
1.12
1.13
1.14
1.15
8V 5600
8V 6000
8V 6300
14224
15240
16002
1.12
1.13
1.13
3V 2000
5080
1.21
5V 3750
5V 4000
9525
10160
1.16
1.17
Design Calculation
Length Factor c3 for optibelt Wedge Belts and Kraftbands
Table 20
Section 5*
Datum
length
(mm)
c3
172
202
248
277
292
312
327
334
347
364
387
418
437
487
512
524
542
566
612
0.87
0.91
0.95
0.97
0.99
1.00
1.01
1.01
1.02
1.03
1.05
1.06
1.07
1.10
1.11
1.11
1.12
1.13
1.15
Section Y/6*
Datum
length
(mm)
c3
280
295
315
330
350
370
390
415
440
465
490
515
555
615
725
765
865
0,97
0,99
1,00
1,01
1,02
1,04
1,05
1,06
1 07
1,09
1,10
1,11
1,13
1,15
1,19
1,20
1,23
Section 8
Datum
length
(mm)
299*
334*
374*
419*
444*
469*
494*
549*
579*
594*
619*
649*
689*
729*
769*
819*
869
894
919
969
1019
1139
1269
1339
1419
1519
0.80
0.81
0.83
0.85
0.86
0.87
0.88
0.89
0.90
0.92
0.93
0.94
0.95
0.96
0.99
1.00
1.01
1.03
1.04
1.05
5058
5358
5658
6058
6358
6758
7158
7558
8058
9058
10058
1.06
1.07
1.09
1.10
1.11
1.13
1.14
1.15
1.17
1.19
1.22
c3
0.86
0.88
0.91
0.93
0.94
0.95
0.97
0.99
1.00
1.01
1.01
1.02
1.04
1.05
1.06
1.08
1.09
1.10
1.10
1.11
1.13
1.15
1.18
1.19
1.20
1.22
Section Z/10,
ZX/X10
Datum
length
(mm)
422*
447*
472*
497*
522*
552*
582*
622
652
692
732
822
847
887
922
947
997
1022
1082
1142
1172
1202
1272
1342
1422
1522
1622
c3
0.86
0.87
0.88
0.89
0.90
0.92
0.93
0.94
0.95
0.96
0.98
1.00
1.01
1.02
1.02
1.03
1.04
1.05
1.06
1.07
1.08
1.08
1.10
1.11
1.12
1.14
1.15
Section A/13,
AX/X13
Datum
length
(mm)
c3
660
740
780
830
880
930
980
1030
1090
1150
1210
1280
1350
1430
1530
1630
1730
1830
1930
2030
2150
2270
2390
2530
2680
2830
3030
3180
3380
3780
4030
4530
5030
0.80
0.82
0.83
0.85
0.86
0.87
0.88
0.89
0.90
0.91
0.92
0.94
0.95
0.96
0.97
0.99
1.00
1.01
1.02
1.03
1.05
1.06
1.07
1.08
1.10
1.11
1.12
1.14
1.15
1.17
1.19
1.22
1.24
Section 25
1311
1461
1561
1661
1761
1861
1961
2061
2181
2301
2421
2561
2711
2861
3061
3211
3411
3611
3811
4061
0.75
0.77
0.78
0.79
0.80
0.81
0.82
0.83
0.85
0.86
0.87
0.88
0.89
0.90
0.92
0.93
0.94
0.95
0.96
0.98
4311
4561
4811
5061
5361
5661
6061
6361
6761
7161
7561
8061
9061
10061
11261
12561
Section B/17,
BX/X17
Datum
length
(mm)
c3
900
990
1040
1100
1140
1220
1290
1360
1440
1540
1640
1740
1840
1940
2040
2160
2280
2400
2590
2690
2840
3040
3190
3390
3590
3790
4040
4290
4540
4790
5040
5340
5640
6040
6340
0.81
0.83
0.84
0.85
0.85
0.87
0.88
0.89
0.90
0.92
0.93
0.94
0.95
0.97
0.98
0.99
1.00
1.01
1.03
1.04
1.05
1.06
1.07
1.09
1.10
1.11
1.13
1.14
1.15
1.17
1.18
1.19
1.20
1.22
1.23
Section D/32
0.99
1.00
1.01
1.02
1.04
1.05
1.06
1.07
1.09
1.10
1.11
1.13
1.15
1.18
1.20
1.23
3225
3425
3625
3825
4075
4325
4575
4825
5075
5375
5675
6075
6375
6775
7175
7575
8075
8575
9075
9575
0.86
0.87
0.88
0.89
0.91
0.92
0.93
0.94
0.95
0.96
0.98
0.99
1.00
1.01
1.03
1.04
1.05
1.06
1.08
1.09
10075
10675
11275
11875
12575
13275
14075
15075
16075
Section 20
Datum
length
(mm)
c3
948
998
1048
1168
1228
1298
1368
1448
1548
1648
1848
2048
2168
2298
2408
2548
2698
2848
3048
3198
3398
3598
3798
4048
4298
4548
4798
5048
5348
5648
6048
6348
7148
8048
0.75
0.76
0.77
0.79
0.80
0.81
0.82
0.83
0.85
0.86
0.88
0.91
0.92
0.93
0.94
0.95
0.96
0.98
0.99
1.00
1.01
1.03
1.04
1.05
1.06
1.08
1.09
1.10
1.11
1.13
1.14
1.15
1.18
1.21
Section E/40
1.10
1.11
1.13
1.14
1.15
1.16
1.18
1.19
1.21
4830
5080
5380
5680
6080
6380
6780
7180
7580
8080
8580
9080
9580
10080
10680
11280
11880
12580
13280
14080
15080
16080
0.92
0.93
0.94
0.95
0.96
0.97
0.99
1.00
1.01
1.03
1.04
1.05
1.06
1.07
1.09
1.10
1.11
1.12
1.14
1.15
1.17
1.18
71
Design Calculation
Guidelines for Selecting V-Belt and Kraftband Sections
By using the following diagrams, the most suitable belt section as
far as efficiency and size are concerned, can be selected for a
specific application. The most efficient power transmission is
achieved by selecting as large a pulley diameter as possible for the
section in question. The limits to be observed are the maximum
permissible circumferential speed, namely Vmax = 42 m/s for high
performance wedge belts and Vmax = 30 m/s for classical V-belts.
Experience has shown that the minimum pulley diameters should be
avoided. These drives require a larger number of belts needing
wider pulleys, and are therefore more costly.
Design Calculation
Guidelines for Selecting V-Belt and Kraftband Sections
m
m
0
10
to
dk
m
m
d
dk
to
63
dk
dk
to
to
40
25
m
0
25
d
dk
to
dk
to
18
dk
to
18
Design Calculation
Guidelines for Selecting V-Belt and Kraftband Sections
dk
to
00
mm
d dk
to
0
18
mm
d dk
to
0
18
d
mm
dk
to
50
mm
d dk
to
0
25
74
mm
d dk
to
0
40
mm
Design Calculation
Minimum Allowance x/y for Adjusting Drive Centre Distance anom
Table 21: Optibelt SK wedge belts
Datum length
(mm)
487
Minimum
allowance x (mm)
for
tensioning
SPA, XPA
SPB, XPB
SPC, XPC
670
10
10
10
670 1 000
15
15
15
20
15
15
25
20
20
20
25
20
20
20
25
35
20
20
20
30
45
20
20
20
30
55
20
20
25
30
70
25
25
30
35
85
25
25
35
40
110
30
30
35
45
135
35
45
150
45
55
190
45
55
>
Outside length
(mm)
Minimum
allowance x (mm)
for
tensioning
5V/15N, 5VX/15NX
8V/25N
>
265
400
>
673 1 016
15
15
>
400
475
20
15
>
475
710
25
20
20
>
710
850
25
20
20
>
850 1 180
35
20
20
40
45
20
20
40
55
20
25
40
70
30
45
85
35
45
110
35
50
135
35
50
150
45
60
190
45
60
75
Design Calculation
Minimum Allowance x/y for Adjusting Drive Centre Distance anom
Table 23: Optibelt VB classical V-belts
Datum length
(mm)
Minimum
allowance x (mm)
for
tensioning
Y/6
20
C/22,
CX/X22
25
D/32
E/40
200
10
>
200
250
10
10
>
250
315
10
10
10
10
>
315
670
10
10
10
10
10
>
670 1 000
15
10
15
15
15
20
15
15
15
15
20
20
25
15
20
20
20
20
25
25
25
20
20
20
20
25
25
30
35
35
20
20
20
25
30
30
35
40
45
20
20
20
25
30
30
35
40
55
20
20
20
30
30
30
35
40
70
20
25
35
35
35
40
45
85
20
25
40
40
40
45
50
110
25
25
40
45
45
45
50
135
30
40
45
45
50
55
150
40
50
55
55
60
65
190
40
50
55
55
60
65
anom
76
Design Calculation
Minimum Allowance x/y for Adjusting Drive Centre Distance anom
Table 24: Optibelt KB Kraftbands with wedge belts
Length
designation
Outside length
(mm)
Minimum
allowance x (mm)
for
tensioning
8V/25J
SPC
475
710
1 206 1 803
25
35
40
>
710
850
25
35
40
>
850 1 180
35
35
40
80
45
35
40
80
80
55
40
45
85
85
70
45
50
85
85
85
50
55
95
95
110
50
55
95
95
135
60
95
95
150
70
105
105
190
85
120
120
Note: Datum lengths must be considered for Kraftbands with sections SPZ, SPA, SPB and SPC.
For raw edge Kraftbands, the same x/y values apply.
Minimum
allowance x (mm)
for
tensioning
B/HB
C/HC
D/HD
1 200 1 800
25
30
35
25
30
35
35
30
35
50
85
45
30
35
50
85
55
30
40
55
90
70
35
45
60
90
85
45
55
65
100
110
45
55
65
100
135
50
60
75
100
150
60
70
85
110
190
70
85
95
125
77
Design Calculation
Formulae and Calculation Examples
Prime mover
Operating conditions
Driven machine
3-phase motor
P = 132 kW
n1 = 1485 rpm
Star delta start
Starting torque MA = 0.65 MN
Fan
P = 132 kW
n2 = 825 15 rpm
Start-up: under load
Type of loading: continuous
Note: The calculation takes into consideration the standard specified by ISO for datum diameter dd (supersedes pitch diameter dw) and
datum length Ld (supersedes pitch length Lw).
Formulae
Calculation example
Service factor
c2 from table 17 page 68
c2 = 1.3
Design Power
PB = P c 2
SPB
Speed ratio
i=
n1
n2
dd2
dd1
i=
1485
825
= 1.8
dd2 = dd1 i
dd1 =
78
dd2
i
Design Calculation
Formulae and Calculation Example
Formulae
Calculation example
500
= 1,79
280
1485
n2 vorh =
= 830 rpm
1,79
ivorh
Required:
825 15 rpm
(requirement met)
a = 1400 mm selected
(ddg + ddk)
(ddg ddk)2
4a
actual:
2202
4 1400
4033 mm
Ldth = 2 a sin
(ddg + ddk) +
180
(ddg ddk)
LdSt = 4000 mm
LdSt
anom =
4033 4000
2
1383.5 mm
(ddg + ddk)
anom 1400
LdSt
(ddg + ddk)
4
(ddg ddk)2
8
x 45 mm / y 20 mm
v =
fb =
ddk nk
19100
2 1000 v
LdSt
(vmax 42 m/s)
v =
fb =
280 1485
19100
= 21.76 m/s
2 1000 21.76
4000
= 10.88 s-1
79
Design Calculation
Formulae and Calculation Examples
Formulae
Calculation example
actual: cos
ddg ddk
500 280
1383.5
170.
c1 = 1.0
= 0,16
linear interpolated
2 anom
Length factor
c3 = 1.02
PN for
ddk = 280 mm
i
= 1.79
nk = 1485 min-1
Section SPB
from table 28 page 84
Number of belts
z=
P c2
z=
PN c 1 c 3
132 1.3
21.86 1.0 1.02
= 7.70
Suggested:
8 Optibelt SK wedge belts SPB 4000 Ld S=C plus
+ k v2
Initial installation:
T = 593 N 1.3 = 771 N
z
Sa 2 T sin
2
(Multiply by a factor of 1.3 at initial installation)
Belt deflection
Ea
EL
100
L = anom sin
2
80
Ea
2.7 1378
37 mm
100
E 2.7 mm
L = 1383.5 0.9962 1378 mm
Drive Calculation
optibelt CAP
The drive is to be equipped with:
-
Deviations / Hints
Prime mover
Driven machine
Design power
Power prime mover
Torque driver pulley
Speed of the driver pulley
Actual output rpm speed
Datum diameter pulley 1
Datum diameter pulley 2
Datum length
Actual drive centre distance
Actual drive ratio
Min. allow. for drive centre distance for belt mounting
Min. allow. for drive centre distance for belt tensioning
:
:
PB:
P:
M:
n1 :
n2 :
dd1:
dd2:
Ld :
a:
i:
y:
x:
three-phase motor
fan
373.33 kW
224.00 kW
1205 Nm
1775 1/min
88 1/min
400.00 mm
800.00 mm
6300 mm
2198.40 mm
2.00
35.00 mm
70.00 mm
c2 :
v:
fB:
PN:
c1:
c3:
b:
b2 :
<:
zth:
7.11
276.87 kg
Sast:
Sast:
Sadyn:
23988 N
18452 N
10547 N
1.87
37.17
11.80
51.84
0.99
1.02
169.60
212.50
2189.30
m/s
1/s
kW
-1 1/min
-1.60 mm
0.1%
mm
mm
for increased c2 = 1.67
initial assembly
New belts
1505 N
125 N
40 mm
5.8 mm
14.4 Hz
operating tension
existing belts
1158 N
125 N
50 mm
4.3 mm
12.7 Hz
81
Power Ratings
Section SPZ, 3V/9N, 3V/9J
Nominal Power Rating PN (kW) for = 180 and Ld = 1600 mm
Statically balanced
v (m/s)
Pulleys
Table 26
nk
(min-1)
63
71
80
85
90
95
100
112
125
132
140
150
160
180
200
700
950
1450
2850
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
5100
5200
5300
5400
5500
5600
5800
6000
6200
6400
6600
6800
7000
7200
7400
7600
7800
8000
8200
8400
0.50
0.63
0.87
1.38
0.10
0.18
0.25
0.32
0.38
0.44
0.50
0.55
0.61
0.66
0.71
0.76
0.80
0.85
0.89
0.93
0.98
1.02
1.06
1.10
1.13
1.17
1.20
1.24
1.27
1.31
1.34
1.37
1.40
1.43
1.45
1.48
1.51
1.53
1.56
1.58
1.60
1.62
1.64
1.66
1.68
1.70
1.72
1.73
1.75
1.76
1.77
1.78
1.80
1.81
1.81
1.82
1.83
1.83
1.84
1.84
1.84
1.84
1.84
1.83
1.81
1.79
1.77
1.74
1.70
1.66
1.62
1.57
1.51
1.45
0.68
0.87
1.23
2.03
0.13
0.24
0.33
0.43
0.51
0.60
0.68
0.76
0.84
0.91
0.98
1.06
1.12
1.19
1.26
1.32
1.39
1.45
1.51
1.57
1.63
1.69
1.74
1.80
1.85
1.90
1.96
2.01
2.05
2.10
2.15
2.19
2.24
2.28
2.32
2.36
2.40
2.44
2.48
2.51
2.55
2.58
2.61
2.64
2.67
2.70
2.73
2.75
2.78
2.80
2.82
2.84
2.86
2.87
2.89
2.90
2.93
2.94
2.96
2.96
2.96
2.95
2.94
2.91
2.89
2.85
2.81
2.76
2.70
2.63
0.88
1.14
1.62
2.74
0.16
0.30
0.43
0.55
0.66
0.78
0.88
0.99
1.09
1.19
1.29
1.39
1.48
1.58
1.67
1.76
1.85
1.93
2.02
2.10
2.18
2.26
2.34
2.42
2.49
2.57
2.64
2.71
2.78
2.85
2.91
2.98
3.04
3.10
3.16
3.22
3.28
3.33
3.39
3.44
3.49
3.54
3.58
3.63
3.67
3.71
3.75
3.79
3.83
3.86
3.89
3.93
3.95
3.98
4.01
4.03
4.07
4.10
4.12
4.13
4.14
4.14
4.12
4.10
4.07
4.02
3.97
3.91
3.83
3.75
1.00
1.29
1.84
3.13
0.18
0.34
0.48
0.62
0.75
0.87
1.00
1.12
1.24
1.35
1.46
1.57
1.68
1.79
1.89
2.00
2.10
2.20
2.29
2.39
2.48
2.58
2.67
2.75
2.84
2.93
3.01
3.09
3.17
3.25
3.33
3.40
3.48
3.55
3.62
3.68
3.75
3.81
3.88
3.94
4.00
4.05
4.11
4.16
4.21
4.26
4.30
4.35
4.39
4.43
4.47
4.50
4.53
4.56
4.59
4.62
4.66
4.70
4.72
4.74
4.74
4.74
4.72
4.69
4.65
4.60
4.53
4.46
4.37
4.27
1.11
1.44
2.06
3.52
0.20
0.37
0.53
0.68
0.83
0.97
1.11
1.24
1.38
1.51
1.63
1.76
1.88
2.00
2.12
2.23
2.35
2.46
2.57
2.68
2.78
2.89
2.99
3.09
3.19
3.28
3.38
3.47
3.56
3.65
3.74
3.82
3.91
3.99
4.06
4.14
4.22
4.29
4.36
4.43
4.49
4.55
4.62
4.67
4.73
4.78
4.84
4.88
4.93
4.97
5.02
5.05
5.09
5.12
5.16
5.18
5.23
5.27
5.29
5.30
5.30
5.29
5.27
5.23
5.18
5.11
5.03
4.94
4.83
4.70
1.22
1.59
2.27
3.90
0.22
0.41
0.58
0.75
0.91
1.07
1.22
1.37
1.52
1.66
1.80
1.94
2.07
2.21
2.34
2.47
2.59
2.72
2.84
2.96
3.08
3.20
3.31
3.42
3.53
3.64
3.74
3.85
3.95
4.05
4.14
4.24
4.33
4.42
4.50
4.59
4.67
4.75
4.83
4.90
4.97
5.04
5.11
5.18
5.24
5.30
5.35
5.40
5.45
5.50
5.55
5.59
5.63
5.66
5.69
5.72
5.77
5.80
5.82
5.83
5.82
5.80
5.76
5.71
5.64
5.56
5.46
5.34
5.21
5.05
1.33
1.74
2.49
4.27
0.24
0.44
0.63
0.81
0.99
1.16
1.33
1.50
1.66
1.81
1.97
2.12
2.27
2.42
2.56
2.70
2.84
2.98
3.11
3.24
3.37
3.50
3.63
3.75
3.87
3.99
4.10
4.22
4.33
4.43
4.54
4.64
4.74
4.84
4.94
5.03
5.12
5.20
5.29
5.37
5.45
5.52
5.59
5.66
5.73
5.79
5.85
5.91
5.96
6.01
6.05
6.10
6.14
6.17
6.20
6.23
6.28
6.31
6.32
6.32
6.30
6.26
6.21
6.14
6.05
5.94
5.82
5.67
5.50
5.32
1.60
2.08
3.00
5.15
0.28
0.52
0.75
0.97
1.19
1.39
1.60
1.79
1.99
2.18
2.37
2.55
2.73
2.91
3.08
3.26
3.42
3.59
3.75
3.91
4.07
4.22
4.38
4.52
4.67
4.81
4.95
5.08
5.22
5.34
5.47
5.59
5.71
5.83
5.94
6.04
6.15
6.25
6.35
6.44
6.53
6.61
6.69
6.77
6.84
6.91
6.97
7.03
7.08
7.13
7.18
7.22
7.26
7.29
7.31
7.33
7.36
7.36
7.35
7.31
7.25
7.16
7.05
6.92
6.76
6.58
6.37
6.13
1.88
2.46
3.54
6.07
0.33
0.61
0.88
1.14
1.39
1.64
1.88
2.12
2.35
2.57
2.79
3.01
3.23
3.44
3.64
3.85
4.05
4.24
4.43
4.62
4.81
4.99
5.17
5.34
5.51
5.67
5.83
5.99
6.14
6.29
6.43
6.57
6.71
6.84
6.96
7.08
7.20
7.31
7.41
7.51
7.61
7.70
7.78
7.86
7.93
8.00
8.06
8.11
8.16
8.20
8.24
8.27
8.29
8.31
8.32
8.32
8.30
8.26
8.19
8.08
7.94
7.78
7.58
7.34
2.03
2.66
3.83
6.55
0.35
0.66
0.95
1.23
1.51
1.77
2.03
2.29
2.54
2.78
3.02
3.26
3.49
3.72
3.94
4.16
4.38
4.59
4.80
5.00
5.20
5.39
5.58
5.77
5.95
6.12
6.30
6.46
6.63
6.78
6.93
7.08
7.22
7.36
7.49
7.61
7.73
7.85
7.95
8.06
8.15
8.24
8.32
8.40
8.47
8.53
8.59
8.63
8.68
8.71
8.74
8.76
8.77
8.77
8.77
8.75
8.71
8.62
8.51
8.35
2.20
2.89
4.16
7.08
0.38
0.71
1.03
1.34
1.63
1.92
2.20
2.48
2.75
3.02
3.28
3.54
3.79
4.04
4.28
4.52
4.75
4.98
5.20
5.42
5.64
5.84
6.05
6.25
6.44
6.63
6.81
6.99
7.16
7.33
7.49
7.64
7.79
7.93
8.07
8.20
8.32
8.43
8.54
8.64
8.73
8.82
8.90
8.97
9.03
9.09
9.13
9.17
9.20
9.22
9.24
9.24
9.23
9.22
9.20
9.16
9.07
8.93
8.76
8.54
2.42
3.17
4.56
7.72
0.42
0.78
1.13
1.47
1.79
2.11
2.42
2.72
3.02
3.31
3.60
3.88
4.16
4.43
4.69
4.95
5.21
5.46
5.70
5.94
6.17
6.40
6.62
6.84
7.04
7.25
7.44
7.63
7.81
7.99
8.16
8.32
8.47
8.61
8.75
8.88
9.00
9.12
9.22
9.32
9.41
9.48
9.55
9.61
9.66
9.70
9.73
9.76
9.77
9.77
9.75
9.73
9.70
9.66
9.60
9.53
9.37
2.63
3.45
4.96
8.34
0.45
0.85
1.23
1.59
1.95
2.29
2.63
2.96
3.29
3.61
3.92
4.22
4.52
4.82
5.11
5.39
5.66
5.93
6.19
6.45
6.70
6.94
7.18
7.41
7.63
7.84
8.05
8.25
8.44
8.62
8.79
8.95
9.11
9.26
9.39
9.52
9.64
9.75
9.85
9.93
10.01
10.08
10.13
10.17
10.21
10.23
10.24
10.23
10.22
10.19
10.15
10.09
10.03
9.95
3.05
4.00
5.75
9.50
0.52
0.98
1.42
1.85
2.26
2.66
3.05
3.44
3.81
4.18
4.54
4.90
5.24
5.58
5.91
6.23
6.55
6.85
7.15
7.44
7.72
7.99
8.25
8.50
8.74
8.97
9.19
9.40
9.60
9.79
9.96
10.12
10.28
10.41
10.54
10.65
10.75
10.83
10.90
10.96
11.00
11.03
11.04
11.03
11.01
10.97
10.92
10.85
10.76
10.65
3.47
4.54
6.51
10.55
0.59
1.12
1.62
2.10
2.57
3.02
3.47
3.91
4.33
4.75
5.16
5.56
5.95
6.32
6.69
7.05
7.40
7.74
8.07
8.38
8.68
8.98
9.26
9.52
9.77
10.01
10.24
10.45
10.64
10.82
10.99
11.14
11.27
11.39
11.48
11.56
11.62
11.67
11.69
11.70
11.68
11.64
11.59
11.51
11.41
SK
Additional
per belt for
1,01 1,06
to
to
1,05 1,26
0.01
0.01
0.02
0.04
0.00
0.00
0.00
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.04
0.04
0.04
0.04
0.04
0.04
0.04
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.07
0.07
0.07
0.07
0.07
0.07
0.07
0.08
0.08
0.08
0.08
0.08
0.09
0.09
0.09
0.09
0.10
0.10
0.10
0.11
0.11
0.11
0.11
0.12
0.12
0.06
0.09
0.13
0.26
0.01
0.02
0.03
0.04
0.05
0.06
0.06
0.07
0.08
0.09
0.10
0.11
0.12
0.13
0.14
0.15
0.16
0.17
0.18
0.19
0.19
0.20
0.21
0.22
0.23
0.24
0.25
0.26
0.27
0.28
0.29
0.30
0.31
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.44
0.45
0.46
0.47
0.48
0.49
0.50
0.51
0.52
0.54
0.56
0.57
0.59
0.61
0.63
0.65
0.67
0.69
0.70
0.72
0.74
0.76
0.78
power (kW)
speed ratio i
1,27 >1,57
to
1,57
0.09
0.12
0.19
0.37
0.01
0.03
0.04
0.05
0.07
0.08
0.09
0.11
0.12
0.13
0.14
0.16
0.17
0.18
0.20
0.21
0.22
0.24
0.25
0.26
0.28
0.29
0.30
0.32
0.33
0.34
0.35
0.37
0.38
0.39
0.41
0.42
0.43
0.45
0.46
0.47
0.49
0.50
0.51
0.53
0.54
0.55
0.57
0.58
0.59
0.60
0.62
0.63
0.64
0.66
0.67
0.68
0.70
0.71
0.72
0.74
0.76
0.79
0.81
0.84
0.87
0.89
0.92
0.95
0.97
1.00
1.03
1.05
1.08
1.10
0.11
0.15
0.23
0.46
0.02
0.03
0.05
0.06
0.08
0.10
0.11
0.13
0.15
0.16
0.18
0.19
0.21
0.23
0.24
0.26
0.27
0.29
0.31
0.32
0.34
0.35
0.37
0.39
0.40
0.42
0.44
0.45
0.47
0.48
0.50
0.52
0.53
0.55
0.56
0.58
0.60
0.61
0.63
0.64
0.66
0.68
0.69
0.71
0.73
0.74
0.76
0.77
0.79
0.81
0.82
0.84
0.85
0.87
0.89
0.90
0.93
0.97
1.00
1.03
1.06
1.10
1.13
1.16
1.19
1.22
1.26
1.29
1.32
1.35
v (m/s)
Dynamically balanced (for details see DIN 2211)
82
Pulleys
Note: Pulley diameters shown are outside diameters for sections 3V/9N, 3V/9J.
Power Ratings
Section SPA
Nominal Power Rating PN (kW) for = 180 and Ld = 2500 mm
Statically balanced
v (m/s)
Pulleys
Table 27
nk
(min-1)
90
100
112
118
125
132
140
150
160
180
200
224
250
280
315
700
950
1450
2850
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
5100
5200
5300
5400
5500
5600
5700
5800
5900
6000
6100
6200
6300
6400
6500
6600
6700
6800
6900
7000
1.17
1.49
2.04
3.14
0.23
0.42
0.59
0.75
0.90
1.04
1.17
1.30
1.43
1.55
1.66
1.77
1.88
1.99
2.09
2.19
2.28
2.37
2.46
2.54
2.62
2.70
2.78
2.85
2.92
2.99
3.05
3.11
3.16
3.22
3.26
3.31
3.35
3.39
3.43
3.46
3.49
3.51
3.53
3.55
3.57
3.58
3.58
3.58
3.58
3.58
3.57
3.55
3.53
3.51
3.48
3.45
3.42
3.38
3.33
3.28
3.23
3.17
3.11
3.04
2.96
2.89
2.80
2.71
2.62
2.52
2.42
2.31
2.19
2.07
1.55
1.98
2.76
4.40
0.30
0.54
0.76
0.97
1.17
1.36
1.55
1.72
1.90
2.06
2.23
2.38
2.54
2.69
2.83
2.97
3.11
3.24
3.37
3.50
3.62
3.74
3.85
3.96
4.07
4.17
4.27
4.36
4.45
4.53
4.61
4.69
4.76
4.83
4.89
4.95
5.01
5.06
5.10
5.14
5.17
5.20
5.23
5.25
5.26
5.27
5.27
5.27
5.26
5.25
5.23
5.21
5.18
5.14
5.10
5.05
4.99
4.93
4.86
4.79
4.70
4.62
4.52
4.42
4.31
4.19
4.07
3.94
3.80
3.66
1.99
2.57
3.62
5.88
0.37
0.68
0.96
1.24
1.50
1.75
1.99
2.23
2.45
2.68
2.90
3.11
3.31
3.52
3.71
3.91
4.09
4.27
4.45
4.62
4.79
4.95
5.11
5.26
5.41
5.55
5.69
5.82
5.94
6.06
6.18
6.29
6.39
6.49
6.58
6.66
6.74
6.81
6.88
6.94
6.99
7.04
7.08
7.11
7.13
7.15
7.16
7.16
7.16
7.15
7.13
7.10
7.06
7.02
6.96
6.90
6.83
6.75
6.66
6.57
6.46
6.34
6.22
6.09
5.94
5.79
5.62
5.45
5.27
5.07
2.21
2.86
4.04
6.60
0.40
0.75
1.07
1.37
1.66
1.94
2.21
2.47
2.73
2.98
3.23
3.47
3.70
3.93
4.15
4.37
4.58
4.78
4.98
5.18
5.37
5.55
5.73
5.90
6.07
6.23
6.38
6.53
6.67
6.81
6.94
7.06
7.18
7.29
7.39
7.48
7.57
7.65
7.73
7.79
7.85
7.90
7.95
7.98
8.01
8.03
8.04
8.04
8.03
8.01
7.99
7.95
7.91
7.85
7.79
7.71
7.63
7.54
7.43
7.32
7.19
7.06
6.91
6.75
6.58
6.40
6.21
6.01
5.79
5.56
2.47
3.20
4.53
7.43
0.45
0.83
1.18
1.52
1.85
2.16
2.47
2.76
3.05
3.34
3.61
3.88
4.15
4.40
4.65
4.90
5.14
5.37
5.60
5.82
6.03
6.24
6.44
6.63
6.82
7.00
7.18
7.34
7.50
7.66
7.80
7.94
8.07
8.19
8.31
8.41
8.51
8.60
8.68
8.75
8.81
8.87
8.91
8.95
8.97
8.99
8.99
8.99
8.97
8.95
8.91
8.86
8.80
8.73
8.65
8.56
8.45
8.34
8.21
8.07
7.92
7.75
7.57
7.38
7.17
6.95
6.72
6.48
6.22
5.94
2.72
3.53
5.02
8.23
0.49
0.91
1.30
1.67
2.03
2.38
2.72
3.05
3.37
3.69
4.00
4.30
4.59
4.87
5.15
5.43
5.69
5.95
6.20
6.45
6.69
6.92
7.14
7.36
7.56
7.76
7.96
8.14
8.32
8.49
8.64
8.80
8.94
9.07
9.19
9.31
9.41
9.50
9.59
9.66
9.73
9.78
9.82
9.85
9.87
9.88
9.88
9.86
9.84
9.80
9.74
9.68
9.60
9.51
9.41
9.29
9.16
9.01
8.85
8.68
8.49
8.29
8.07
7.84
7.59
3.01
3.91
5.57
9.13
0.54
1.00
1.43
1.85
2.25
2.63
3.01
3.38
3.74
4.09
4.43
4.76
5.09
5.41
5.72
6.02
6.32
6.61
6.89
7.16
7.42
7.68
7.93
8.17
8.39
8.62
8.83
9.03
9.22
9.41
9.58
9.74
9.89
10.03
10.17
10.28
10.39
10.49
10.57
10.65
10.71
10.76
10.79
10.81
10.82
10.82
10.80
10.77
10.72
10.66
10.58
10.49
10.39
10.27
10.13
9.97
9.80
9.62
9.42
9.20
8.96
8.70
8.43
8.14
7.83
3.37
4.39
6.25
10.21
0.60
1.11
1.60
2.06
2.51
2.95
3.37
3.78
4.19
4.58
4.97
5.34
5.71
6.07
6.42
6.76
7.09
7.42
7.73
8.03
8.33
8.61
8.89
9.15
9.41
9.65
9.88
10.11
10.32
10.51
10.70
10.87
11.03
11.18
11.32
11.44
11.55
11.64
11.72
11.79
11.84
11.87
11.89
11.90
11.88
11.86
11.81
11.75
11.67
11.57
11.45
11.32
11.17
11.00
10.81
10.60
10.37
10.12
9.84
9.55
3.73
4.86
6.92
11.25
0.65
1.22
1.76
2.28
2.77
3.26
3.73
4.19
4.64
5.07
5.50
5.92
6.33
6.72
7.11
7.49
7.86
8.21
8.56
8.89
9.22
9.53
9.83
10.12
10.39
10.65
10.90
11.14
11.36
11.57
11.77
11.95
12.11
12.26
12.40
12.52
12.62
12.70
12.77
12.82
12.85
12.87
12.86
12.84
12.80
12.73
12.65
12.55
12.43
12.28
12.11
11.92
11.71
11.48
11.22
4.44
5.78
8.24
13.21
0.77
1.45
2.09
2.70
3.30
3.87
4.44
4.99
5.52
6.04
6.55
7.05
7.54
8.01
8.47
8.91
9.34
9.76
10.17
10.55
10.93
11.29
11.63
11.95
12.26
12.56
12.83
13.09
13.32
13.54
13.74
13.92
14.07
14.21
14.32
14.42
14.48
14.53
14.55
14.55
14.52
14.47
14.39
14.28
14.15
13.99
13.80
13.58
13.33
13.05
5.14
6.70
9.52
14.97
0.89
1.67
2.41
3.12
3.81
4.48
5.14
5.77
6.39
7.00
7.59
8.16
8.72
9.26
9.79
10.29
10.78
11.25
11.71
12.14
12.56
12.95
13.32
13.67
14.00
14.31
14.59
14.85
15.08
15.29
15.47
15.62
15.75
15.84
15.91
15.95
15.95
15.93
15.87
15.78
15.66
15.50
15.30
15.07
14.80
5.97
7.78
11.02
16.81
1.03
1.94
2.80
3.63
4.43
5.21
5.97
6.71
7.43
8.12
8.80
9.46
10.10
10.72
11.32
11.89
12.44
12.97
13.47
13.94
14.39
14.81
15.20
15.57
15.90
16.20
16.47
16.70
16.90
17.07
17.20
17.29
17.34
17.35
17.33
17.26
17.15
16.99
16.79
16.54
6.85
8.92
12.58
18.43
1.18
2.22
3.21
4.16
5.09
5.98
6.85
7.70
8.52
9.32
10.09
10.84
11.55
12.25
12.91
13.54
14.14
14.71
15.25
15.75
16.22
16.65
17.04
17.39
17.70
17.96
18.19
18.36
18.49
18.57
18.60
18.58
18.51
18.38
18.20
7.86
10.21
14.30
19.78
1.35
2.55
3.68
4.78
5.84
6.86
7.86
8.82
9.76
10.66
11.53
12.37
13.17
13.93
14.66
15.34
15.99
16.59
17.14
17.65
18.11
18.52
18.87
19.17
19.41
19.60
19.72
19.78
19.77
19.70
9.01
11.68
16.18
20.57
1.55
2.92
4.23
5.49
6.70
7.88
9.01
10.11
11.17
12.18
13.15
14.08
14.96
15.79
16.56
17.29
17.95
18.56
19.10
19.57
19.98
20.32
20.58
20.77
20.87
20.90
20.83
20.68
20.44
SK
Additional
per belt for
1,01 1,06
to
to
1,05 1,26
0.02
0.03
0.05
0.09
0.00
0.01
0.01
0.01
0.02
0.02
0.02
0.03
0.03
0.03
0.04
0.04
0.04
0.05
0.05
0.05
0.06
0.06
0.06
0.07
0.07
0.07
0.08
0.08
0.08
0.09
0.09
0.09
0.10
0.10
0.10
0.11
0.11
0.11
0.12
0.12
0.12
0.13
0.13
0.13
0.14
0.14
0.14
0.15
0.15
0.15
0.16
0.16
0.16
0.17
0.17
0.17
0.18
0.18
0.18
0.19
0.19
0.19
0.20
0.20
0.20
0.21
0.21
0.21
0.22
0.22
0.22
0.23
0.23
0.23
power (kW)
speed ratio i
1,27 >1,57
to
1,57
0.15 0.21
0.20 0.29
0.31 0.44
0.61 0.87
0.02 0.03
0.04 0.06
0.06 0.09
0.09 0.12
0.11 0.15
0.13 0.18
0.15 0.21
0.17 0.24
0.19 0.27
0.22 0.31
0.24 0.34
0.26 0.37
0.28 0.40
0.30 0.43
0.32 0.46
0.34 0.49
0.37 0.52
0.39 0.55
0.41 0.58
0.43 0.61
0.45 0.64
0.47 0.67
0.50 0.70
0.52 0.73
0.54 0.76
0.56 0.79
0.58 0.82
0.60 0.86
0.62 0.89
0.65 0.92
0.67 0.95
0.69 0.98
0.71 1.01
0.73 1.04
0.75 1.07
0.77 1.10
0.80 1.13
0.82 1.16
0.84 1.19
0.86 1.22
0.88 1.25
0.90 1.28
0.93 1.31
0.95 1.34
0.97 1.37
0.99 1.41
1.01 1.44
1.03 1.47
1.05 1.50
1.08 1.53
1.10 1.56
1.12 1.59
1.14 1.62
1.16 1.65
1.18 1.68
1.21 1.71
1.23 1.74
1.25 1.77
1.27 1.80
1.29 1.83
1.31 1.86
1.33 1.89
1.36 1.92
1.38 1.96
1.40 1.99
1.42 2.02
1.44 2.05
1.46 2.08
1.49 2.11
1.51 2.14
0.26
0.36
0.54
1.07
0.04
0.07
0.11
0.15
0.19
0.22
0.26
0.30
0.34
0.37
0.41
0.45
0.49
0.52
0.56
0.60
0.64
0.67
0.71
0.75
0.79
0.82
0.86
0.90
0.94
0.97
1.01
1.05
1.09
1.12
1.16
1.20
1.24
1.27
1.31
1.35
1.39
1.42
1.46
1.50
1.54
1.57
1.61
1.65
1.69
1.72
1.76
1.80
1.84
1.87
1.91
1.95
1.99
2.02
2.06
2.10
2.13
2.17
2.21
2.25
2.28
2.32
2.36
2.40
2.43
2.47
2.51
2.55
2.58
2.62
v (m/s)
Dynamically balanced (for details see DIN 2211)
Pulleys
83
Power Ratings
Section SPB, 5V/15N, 5V/15J
Nominal Power Rating PN (kW) for = 180 and Ld = 3550 mm
Statically balanced
v (m/s)
Pulleys
Table 28
nk
(min-1)
140
150
160
180
190
200
212
224
236
250
280
315
700
950
1450
2850
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
5100
5200
5300
5400
5500
3.46
4.42
6.09
9.07
0.66
1.21
1.71
2.17
2.62
3.05
3.46
3.85
4.23
4.60
4.95
5.29
5.62
5.94
6.24
6.54
6.82
7.08
7.34
7.58
7.81
8.02
8.22
8.41
8.58
8.74
8.88
9.01
9.12
9.22
9.30
9.36
9.41
9.44
9.45
9.45
9.42
9.38
9.31
9.23
9.13
9.01
8.86
8.70
8.51
8.30
8.07
7.82
7.54
7.24
6.92
6.57
6.19
5.79
5.37
4.04
5.19
7.20
10.83
0.76
1.39
1.97
2.52
3.05
3.55
4.04
4.51
4.96
5.40
5.83
6.24
6.63
7.01
7.38
7.73
8.07
8.40
8.71
9.00
9.28
9.54
9.79
10.02
10.23
10.42
10.60
10.76
10.90
11.02
11.12
11.21
11.27
11.31
11.33
11.33
11.30
11.25
11.18
11.09
10.97
10.82
10.65
10.46
10.24
9.99
9.72
9.41
9.08
8.72
8.33
7.91
7.46
6.98
6.47
4.62
5.95
8.29
12.53
0.85
1.57
2.24
2.87
3.48
4.06
4.62
5.17
5.69
6.20
6.69
7.17
7.63
8.08
8.51
8.92
9.31
9.69
10.05
10.39
10.72
11.03
11.31
11.58
11.83
12.06
12.26
12.45
12.61
12.75
12.86
12.96
13.02
13.07
13.08
13.08
13.04
12.98
12.89
12.77
12.62
12.44
12.23
11.99
11.72
11.42
11.08
10.72
10.31
9.87
9.40
8.89
8.34
7.76
7.14
5.77
7.46
10.44
15.71
1.04
1.94
2.77
3.56
4.32
5.06
5.77
6.46
7.13
7.78
8.41
9.01
9.60
10.16
10.71
11.23
11.73
12.21
12.67
13.10
13.51
13.89
14.24
14.57
14.88
15.15
15.39
15.61
15.79
15.95
16.07
16.16
16.21
16.23
16.22
16.17
16.08
15.95
15.78
15.58
15.33
15.04
14.71
14.33
13.92
13.45
12.94
12.38
11.78
11.13
6.34
8.20
11.49
17.18
1.14
2.12
3.03
3.91
4.75
5.56
6.34
7.10
7.84
8.56
9.25
9.92
10.57
11.19
11.79
12.36
12.91
13.44
13.93
14.41
14.85
15.26
15.64
16.00
16.32
16.61
16.86
17.08
17.27
17.42
17.53
17.60
17.63
17.63
17.58
17.49
17.36
17.18
16.95
16.68
16.36
16.00
15.58
15.11
14.60
6.91
8.94
12.53
18.57
1.23
2.30
3.29
4.25
5.16
6.05
6.91
7.74
8.55
9.33
10.09
10.82
11.52
12.20
12.85
13.48
14.07
14.64
15.18
15.68
16.15
16.59
17.00
17.37
17.70
18.00
18.26
18.48
18.66
18.79
18.88
18.93
18.93
18.89
18.80
18.66
18.47
18.22
17.93
17.58
17.17
16.71
16.19
15.62
14.98
7.59
9.82
13.76
20.13
1.35
2.51
3.61
4.66
5.66
6.64
7.59
8.50
9.39
10.25
11.08
11.88
12.65
13.40
14.11
14.79
15.44
16.05
16.63
17.17
17.67
18.14
18.57
18.95
19.29
19.59
19.84
20.05
20.20
20.31
20.37
20.38
20.33
20.22
20.06
19.84
19.57
19.23
18.83
18.36
8.26
10.69
14.96
21.57
1.46
2.73
3.92
5.06
6.16
7.23
8.26
9.26
10.22
11.16
12.06
12.93
13.77
14.57
15.34
16.07
16.77
17.42
18.04
18.61
19.14
19.62
20.06
20.45
20.79
21.08
21.31
21.50
21.62
21.69
21.70
21.64
21.53
21.35
21.10
20.78
20.40
19.94
19.41
18.81
8.92
11.56
16.15
22.87
1.57
2.94
4.23
5.47
6.66
7.81
8.92
10.00
11.05
12.06
13.03
13.97
14.87
15.73
16.55
17.33
18.07
18.76
19.40
20.00
20.55
21.04
21.48
21.87
22.20
22.47
22.67
22.82
22.90
22.91
22.85
22.72
22.52
22.25
21.90
9.70
12.56
17.50
24.21
1.70
3.19
4.59
5.94
7.23
8.48
9.70
10.87
12.00
13.10
14.15
15.16
16.13
17.06
17.93
18.76
19.54
20.27
20.94
21.56
22.11
22.61
23.05
23.41
23.72
23.95
24.11
24.19
24.20
24.13
23.98
23.74
23.42
23.01
22.51
11.33
14.66
20.30
26.40
1.98
3.72
5.36
6.93
8.45
9.92
11.33
12.70
14.02
15.28
16.50
17.65
18.76
19.80
20.78
21.69
22.54
23.31
24.02
24.64
25.19
25.65
26.03
26.31
26.50
26.60
26.60
26.49
26.28
25.96
13.21
17.04
23.36
27.68
2.30
4.33
6.24
8.08
9.85
11.56
13.21
14.79
16.30
17.75
19.13
20.44
21.67
22.82
23.88
24.86
25.74
26.52
27.20
27.77
28.24
28.58
28.81
28.91
28.88
28.71
28.41
27.96
27.36
355
375
400
2.84
5.36
7.74
10.03
12.22
14.32
16.33
18.25
20.07
21.79
23.40
24.89
26.26
27.51
28.62
29.58
30.39
31.04
31.53
31.84
31.96
31.90
31.63
31.16
3.07
5.79
8.36
10.82
13.18
15.44
17.59
19.64
21.57
23.39
25.07
26.62
28.02
29.27
30.35
31.26
31.99
32.53
32.86
32.99
32.89
32.57
SK
Additional
per belt for
1,01 1,06
to
to
1,05 1,26
power (kW)
speed ratio i
1,27 >1,57
to
1,57
0.58
0.78
1.20
2.35
0.08
0.16
0.25
0.33
0.41
0.49
0.58
0.66
0.74
0.82
0.91
0.99
1.07
1.15
1.24
1.32
1.40
1.48
1.57
1.65
1.73
1.81
1.90
1.98
2.06
2.14
2.23
2.31
2.39
2.47
2.56
2.64
2.72
2.80
2.89
2.97
3.05
3.13
3.21
3.30
3.38
3.46
3.54
3.63
3.71
3.79
3.87
3.96
4.04
4.12
4.20
4.29
4.37
4.45
4.53
84
Pulleys
Note: Pulley diameters shown are outside diameters for sections 5V/15N, 5V/15J.
Power Ratings
Section SPC
Nominal Power Rating PN (kW) for = 180 and Ld = 5600 mm
Statically balanced
v (m/s)
Pulleys
Table 29
nk
(min-1)
224
250
280
300
315
335
355
375
400
450
500
560
630
710
700
950
1450
2850
50
100
200
300
350
400
450
500
550
600
650
700
750
800
850
900
950
1000
1050
1100
1150
1200
1250
1300
1350
1400
1450
1500
1550
1600
1650
1700
1750
1800
1850
1900
1950
2000
2050
2100
2150
2200
2250
2300
2350
2400
2450
2500
2550
2600
2650
2700
2750
2800
2850
2900
2950
3000
3050
3100
3150
3200
3250
3300
3350
3400
3450
3500
10.46
13.27
17.79
20.63
1.08
1.99
3.64
5.16
5.89
6.59
7.28
7.95
8.60
9.23
9.85
10.46
11.05
11.63
12.19
12.74
13.27
13.79
14.30
14.79
15.26
15.72
16.17
16.60
17.01
17.41
17.79
18.16
18.51
18.84
19.16
19.45
19.73
19.99
20.24
20.46
20.66
20.85
21.01
21.16
21.28
21.38
21.46
21.52
21.56
21.57
21.57
21.53
21.48
21.40
21.30
21.17
21.02
20.84
20.63
20.40
20.14
19.86
19.55
19.21
18.84
18.44
18.02
17.56
17.08
16.56
16.02
15.44
13.11
16.71
22.48
25.52
1.31
2.44
4.49
6.40
7.31
8.20
9.07
9.91
10.74
11.55
12.34
13.11
13.87
14.60
15.32
16.02
16.71
17.37
18.02
18.64
19.25
19.84
20.41
20.96
21.49
21.99
22.48
22.94
23.39
23.81
24.20
24.58
24.92
25.25
25.55
25.82
26.07
26.29
26.49
26.66
26.79
26.91
26.99
27.04
27.06
27.05
27.02
26.94
26.84
26.71
26.54
26.33
26.10
25.83
25.52
25.18
24.80
24.38
23.93
23.43
22.90
22.33
21.72
21.07
20.38
19.65
18.87
18.05
16.13
20.58
27.64
29.58
1.58
2.94
5.46
7.81
8.94
10.04
11.11
12.16
13.19
14.19
15.17
16.13
17.06
17.98
18.87
19.74
20.58
21.40
22.20
22.97
23.72
24.44
25.13
25.80
26.44
27.06
27.64
28.20
28.72
29.22
29.68
30.11
30.51
30.88
31.21
31.51
31.77
31.99
32.18
32.34
32.45
32.52
32.56
32.55
32.50
32.41
32.28
32.10
31.88
31.62
31.30
30.94
30.54
30.08
29.58
29.03
28.42
27.77
27.06
26.30
25.49
24.62
23.69
18.11
23.11
30.92
31.27
1.75
3.28
6.11
8.75
10.01
11.25
12.46
13.64
14.80
15.93
17.03
18.11
19.16
20.19
21.19
22.16
23.11
24.03
24.91
25.77
26.61
27.41
28.17
28.91
29.62
30.29
30.92
31.53
32.09
32.62
33.11
33.56
33.98
34.35
34.68
34.97
35.22
35.42
35.58
35.69
35.76
35.78
35.75
35.67
35.54
35.36
35.13
34.84
34.50
34.10
33.65
33.14
32.58
19.58
24.97
33.30
31.96
1.89
3.53
6.59
9.44
10.82
12.16
13.47
14.75
16.00
17.22
18.42
19.58
20.72
21.83
22.91
23.96
24.97
25.96
26.92
27.84
28.73
29.58
30.40
31.18
31.93
32.63
33.30
33.93
34.52
35.06
35.56
36.02
36.43
36.80
37.12
37.39
37.61
37.79
37.91
37.97
37.99
37.95
37.85
37.70
37.49
37.22
36.89
36.50
36.05
35.53
34.95
34.30
33.59
21.52
27.42
36.35
23.44
29.82
39.26
25.34
32.18
42.02
27.68
35.05
45.25
32.24
40.55
50.94
36.64
45.70
55.51
41.70
51.38
59.36
47.28
57.27
61.37
53.19
62.91
2.06
3.87
7.22
10.37
11.88
13.36
14.80
16.21
17.59
18.93
20.24
21.52
22.77
23.99
25.17
26.31
27.42
28.50
29.53
30.53
31.49
32.41
33.28
34.12
34.91
35.65
36.35
37.00
37.61
38.16
38.66
39.11
39.51
39.85
40.14
40.37
40.54
40.65
40.69
40.68
40.60
40.46
40.25
39.97
39.63
39.21
38.72
38.16
2.23
4.20
7.86
11.29
12.94
14.55
16.12
17.66
19.16
20.62
22.05
23.44
24.80
26.11
27.39
28.63
29.82
30.98
32.09
33.16
34.18
35.15
36.07
36.95
37.77
38.54
39.26
39.92
40.53
41.07
41.56
41.98
42.35
42.64
42.87
43.04
43.13
43.16
43.11
42.99
42.79
42.51
42.16
41.73
41.21
40.61
39.93
39.16
2.41
4.53
8.49
12.21
13.99
15.73
17.44
19.10
20.72
22.30
23.84
25.34
26.80
28.21
29.58
30.90
32.18
33.41
34.58
35.71
36.78
37.80
38.76
39.67
40.52
41.30
42.02
42.68
43.27
43.79
44.24
44.62
44.93
45.16
45.32
45.39
45.39
45.30
45.13
44.87
44.52
44.08
43.55
2.62
4.95
9.28
13.34
15.30
17.21
19.07
20.88
22.65
24.37
26.05
27.68
29.26
30.78
32.26
33.68
35.05
36.36
37.61
38.80
39.93
40.99
41.98
42.91
43.77
44.55
45.25
45.88
46.43
46.90
47.29
47.58
47.79
47.91
47.94
47.87
47.70
47.44
47.07
46.60
46.02
45.33
44.53
3.05
5.77
10.84
15.60
17.88
20.11
22.28
24.39
26.44
28.44
30.37
32.24
34.04
35.77
37.44
39.03
40.55
41.99
43.34
44.62
45.81
46.90
47.91
48.82
49.63
50.34
50.94
51.44
51.83
52.10
52.25
52.28
52.19
51.97
51.62
51.14
50.52
49.76
3.48
6.58
12.38
17.83
20.44
22.97
25.44
27.83
30.15
32.39
34.56
36.64
38.64
40.54
42.36
44.08
45.70
47.21
48.62
49.92
51.10
52.16
53.10
53.90
54.58
55.12
55.51
55.76
55.86
55.81
55.59
55.21
54.67
3.99
7.56
14.22
20.47
23.45
26.35
29.15
31.86
34.48
36.99
39.40
41.70
43.89
45.95
47.89
49.71
51.38
52.92
54.30
55.54
56.61
57.52
58.25
58.81
59.19
59.37
59.36
59.15
4.58
8.68
16.34
23.50
26.90
30.20
33.37
36.42
39.34
42.13
44.78
47.28
49.62
51.80
53.80
55.63
57.27
58.71
59.94
60.96
61.76
62.33
62.65
62.73
62.55
62.10
61.37
5.25
9.95
18.73
26.90
30.77
34.48
38.04
41.44
44.66
47.70
50.55
53.19
55.61
57.81
59.77
61.47
62.91
64.08
64.95
65.53
65.79
65.72
65.31
SK
Additional
per belt for
1,01 1,06
to
to
1,05 1,26
0.14
0.19
0.29
0.57
0.01
0.02
0.04
0.06
0.07
0.08
0.09
0.10
0.11
0.12
0.13
0.14
0.15
0.16
0.17
0.18
0.19
0.20
0.21
0.22
0.23
0.24
0.25
0.26
0.27
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
0.50
0.51
0.52
0.53
0.54
0.55
0.56
0.57
0.58
0.59
0.60
0.61
0.62
0.63
0.64
0.65
0.66
0.67
0.68
0.69
0.70
0.90
1.22
1.86
3.67
0.06
0.13
0.26
0.39
0.45
0.51
0.58
0.64
0.71
0.77
0.84
0.90
0.96
1.03
1.09
1.16
1.22
1.29
1.35
1.41
1.48
1.54
1.61
1.67
1.74
1.80
1.86
1.93
1.99
2.06
2.12
2.19
2.25
2.31
2.38
2.44
2.51
2.57
2.64
2.70
2.77
2.83
2.89
2.96
3.02
3.09
3.15
3.22
3.28
3.34
3.41
3.47
3.54
3.60
3.67
3.73
3.79
3.86
3.92
3.99
4.05
4.12
4.18
4.24
4.31
4.37
4.44
4.50
power (kW)
speed ratio i
1,27 >1,57
to
1,57
1.28
1.73
2.65
5.20
0.09
0.18
0.37
0.55
0.64
0.73
0.82
0.91
1.00
1.10
1.19
1.28
1.37
1.46
1.55
1.64
1.73
1.83
1.92
2.01
2.10
2.19
2.28
2.37
2.46
2.56
2.65
2.74
2.83
2.92
3.01
3.10
3.19
3.29
3.38
3.47
3.56
3.65
3.74
3.83
3.92
4.02
4.11
4.20
4.29
4.38
4.47
4.56
4.66
4.75
4.84
4.93
5.02
5.11
5.20
5.29
5.39
5.48
5.57
5.66
5.75
5.84
5.93
6.02
6.12
6.21
6.30
6.39
1.57
2.13
3.25
6.38
0.11
0.22
0.45
0.67
0.78
0.90
1.01
1.12
1.23
1.34
1.45
1.57
1.68
1.79
1.90
2.01
2.13
2.24
2.35
2.46
2.57
2.69
2.80
2.91
3.02
3.13
3.25
3.36
3.47
3.58
3.69
3.80
3.92
4.03
4.14
4.25
4.36
4.48
4.59
4.70
4.81
4.92
5.04
5.15
5.26
5.37
5.48
5.60
5.71
5.82
5.93
6.04
6.16
6.27
6.38
6.49
6.60
6.71
6.83
6.94
7.05
7.16
7.27
7.39
7.50
7.61
7.72
7.83
v (m/s)
Dynamically balanced (for details see DIN 2211)
Pulleys
85
Power Ratings
Section 8V/25N, 8V/25J
Nominal Power Rating PN (kW) for = 180 and 8V 2500/6350 mm La
Statically balanced
v (m/s)
Pulleys
Table 30
nk
(min-1)
335
355
375
425
450
475
500
530
560
600
630
710
800
700
950
1450
50
100
150
200
250
300
350
400
450
500
550
600
650
700
750
800
850
900
950
1000
1050
1100
1150
1200
1250
1300
1350
1400
1450
1500
1550
1600
1650
1700
1750
1800
1850
1900
1950
2000
2050
2100
2150
2200
2250
25.67
32.09
40.47
2.63
4.87
6.97
8.97
10.89
12.74
14.54
16.28
17.97
19.61
21.20
22.74
24.23
25.67
27.06
28.40
29.68
30.91
32.09
33.21
34.27
35.27
36.21
37.09
37.90
38.65
39.33
39.93
40.47
40.93
41.31
41.62
41.85
41.99
42.05
42.03
41.92
41.72
41.42
41.04
40.55
39.97
39.29
38.50
37.62
28.61
35.77
44.90
2.89
5.38
7.71
9.94
12.08
14.15
16.16
18.11
20.00
21.83
23.61
25.33
27.00
28.61
30.16
31.66
33.09
34.46
35.77
37.01
38.18
39.29
40.32
41.28
42.16
42.97
43.70
44.34
44.90
45.37
45.75
46.04
46.24
46.34
46.35
46.25
46.05
45.74
45.32
44.79
44.15
43.40
42.52
41.53
40.41
31.52
39.37
49.10
3.16
5.89
8.46
10.91
13.27
15.56
17.78
19.93
22.01
24.04
26.00
27.90
29.74
31.52
33.23
34.87
36.44
37.94
39.37
40.72
42.00
43.19
44.30
45.33
46.27
47.12
47.88
48.54
49.10
49.56
49.91
50.16
50.30
50.33
50.24
50.04
49.71
49.26
48.69
47.98
47.14
46.16
45.05
43.79
42.40
38.62
48.03
58.51
3.82
7.15
10.30
13.31
16.22
19.04
21.77
24.42
26.99
29.48
31.89
34.22
36.46
38.62
40.69
42.67
44.56
46.34
48.03
49.61
51.09
52.45
53.69
54.82
55.82
56.69
57.44
58.04
58.51
58.84
59.01
59.04
58.90
58.61
58.15
57.52
56.72
55.74
54.58
53.23
42.08
52.17
62.60
4.15
7.78
11.22
14.51
17.68
20.76
23.74
26.64
29.44
32.16
34.78
37.31
39.75
42.08
44.32
46.45
48.47
50.38
52.17
53.84
55.38
56.79
58.06
59.20
60.19
61.03
61.71
62.24
62.60
62.80
62.81
62.65
62.31
61.77
61.05
60.12
58.98
57.64
56.08
54.31
45.49
56.17
66.25
4.48
8.41
12.13
15.69
19.14
22.47
25.71
28.84
31.87
34.81
37.64
40.36
42.98
45.49
47.87
50.14
52.28
54.29
56.17
57.90
59.49
60.93
62.20
63.32
64.27
65.04
65.63
66.04
66.25
66.27
66.08
65.69
65.08
64.25
63.19
48.82
60.03
69.44
4.80
9.03
13.03
16.88
20.59
24.18
27.66
31.02
34.28
37.43
40.46
43.37
46.16
48.82
51.35
53.74
55.99
58.09
60.03
61.81
63.42
64.85
66.11
67.17
68.04
68.71
69.17
69.42
69.44
69.24
68.80
68.11
67.18
65.99
64.54
52.74
64.47
72.63
5.19
9.78
14.12
18.29
22.31
26.21
29.98
33.62
37.14
40.54
43.80
46.92
49.91
52.74
55.42
57.94
60.30
62.47
64.47
66.27
67.87
69.27
70.46
71.42
72.16
72.65
72.90
72.90
72.63
56.57
68.68
75.10
5.58
10.52
15.20
19.69
24.03
28.22
32.28
36.19
39.97
43.60
47.08
50.41
53.57
56.57
59.38
62.01
64.44
66.67
68.68
70.48
72.04
73.36
74.44
75.25
75.80
76.06
76.04
75.72
75.10
61.51
73.95
77.18
6.10
11.51
16.63
21.56
26.30
30.89
35.32
39.58
43.69
47.62
51.38
54.95
58.33
61.51
64.46
67.20
69.70
71.95
73.95
75.68
77.12
78.28
79.13
79.66
79.87
79.74
79.25
65.09
77.62
77.79
6.48
12.24
17.70
22.94
28.00
32.87
37.57
42.10
46.44
50.59
54.54
58.28
61.80
65.09
68.13
70.92
73.44
75.67
77.62
79.25
80.56
81.53
82.16
82.42
82.31
81.80
80.89
79.56
77.79
74.10
86.13
0.59
7.51
14.19
20.53
26.61
32.46
38.09
43.49
48.66
53.59
58.27
62.67
66.79
70.61
74.10
77.26
80.06
82.49
84.52
86.13
87.31
88.04
88.30
88.06
87.31
86.03
83.23
93.33
3.79
8.65
16.37
23.68
30.68
37.40
43.84
49.98
55.82
61.33
66.50
71.30
75.70
79.69
83.23
86.31
88.88
90.92
92.42
93.33
93.63
93.28
92.28
90.56
88.14
SK
Additional
per belt for
1,01 1,06
to
to
1,05 1,26
0.28 1.83
0.38 2.48
5.38 6.60
0.02 0.13
0.04 0.26
0.06 0.39
0.08 0.52
0.10 0.65
0.12 0.78
0.14 0.91
0.16 1.05
0.18 1.18
0.20 1.31
0.22 1.44
0.24 1.57
0.26 1.70
0.28 1.83
0.30 1.96
0.32 2.09
0.34 2.22
0.36 2.35
0.38 2.48
0.40 2.61
0.42 2.74
0.44 2.88
0.46 3.01
0.49 3.14
0.51 3.27
0.53 3.40
0.55 3.53
0.57 3.66
0.59 3.79
0.61 3.92
0.63 4.05
0.65 4.18
0.67 4.31
0.69 4.44
0.71 4.57
0.73 4.70
0.75 4.84
0.77 4.97
0.79 5.10
0.81 5.23
0.83 5.36
0.85 5.49
0.87 5.62
0.89 5.75
0.91 5.88
power (kW)
speed ratio i
1,27 >1,57
to
1,57
2.60
3.52
3.18
4.32
0.19
0.37
0.56
0.74
0.93
1.11
1.30
1.48
1.67
1.86
2.04
2.23
2.41
2.60
2.78
2.97
3.15
3.34
3.52
3.71
3.90
4.08
4.27
4.45
4.64
4.82
5.01
5.19
5.38
5.57
5.75
5.94
6.12
6.31
6.49
6.68
6.86
7.05
7.23
7.42
7.61
7.79
7.98
8.16
8.35
0.23
0.45
0.68
0.91
1.14
1.36
1.59
1.82
2.05
2.27
2.50
2.73
2.96
3.18
3.41
3.64
3.87
4.09
4.32
4.55
4.78
5.00
5.23
5.46
5.69
5.91
6.14
6.37
6.60
6.82
7.05
7.28
7.51
7.73
7.96
8.19
8.42
8.64
8.87
9.10
9.33
9.55
9.78
10.01
10.23
86
Pulleys
Power Ratings
optibelt RED POWER II Section SPZ, 3V/9N, 3V/9J
Nominal Power Rating PN (kW) for = 180 and Ld = 1600 mm
Statically balanced
v (m/s)
Pulleys
Table 31
nk
(min-1)
63
71
80
85
90
95
100
700
950
1450
2850
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
5100
5200
5300
5400
5500
5600
5800
6000
6200
6400
6600
6800
7000
7200
7400
7600
7800
8000
8200
8400
0.60
0.77
1.08
1.80
0.11
0.21
0.30
0.38
0.45
0.53
0.60
0.67
0.74
0.80
0.87
0.93
0.99
1.05
1.11
1.17
1.23
1.28
1.34
1.39
1.44
1.49
1.54
1.59
1.64
1.69
1.74
1.78
1.83
1.87
1.91
1.95
1.99
2.03
2.07
2.11
2.15
2.18
2.22
2.25
2.29
2.32
2.35
2.38
2.41
2.44
2.47
2.49
2.52
2.54
2.57
2.59
2.61
2.63
2.65
2.67
2.70
2.73
2.75
2.77
2.78
2.79
2.80
2.80
2.79
2.78
2.77
2.75
2.72
2.69
0.80
1.03
1.47
2.50
0.15
0.27
0.38
0.49
0.60
0.70
0.80
0.89
0.99
1.08
1.17
1.25
1.34
1.43
1.51
1.59
1.67
1.75
1.83
1.90
1.98
2.05
2.13
2.20
2.27
2.34
2.40
2.47
2.54
2.60
2.66
2.73
2.79
2.85
2.90
2.96
3.02
3.07
3.13
3.18
3.23
3.28
3.33
3.37
3.42
3.46
3.51
3.55
3.59
3.63
3.67
3.70
3.74
3.77
3.80
3.83
3.89
3.94
3.99
4.02
4.06
4.08
4.10
4.11
4.11
4.11
4.10
4.09
4.06
4.03
1.02
1.32
1.89
3.28
0.18
0.34
0.48
0.62
0.76
0.89
1.02
1.14
1.26
1.38
1.50
1.61
1.73
1.84
1.95
2.06
2.16
2.27
2.37
2.47
2.57
2.67
2.77
2.87
2.96
3.05
3.14
3.23
3.32
3.41
3.49
3.58
3.66
3.74
3.82
3.89
3.97
4.04
4.12
4.19
4.26
4.32
4.39
4.45
4.51
4.58
4.63
4.69
4.75
4.80
4.85
4.90
4.95
4.99
5.03
5.08
5.15
5.22
5.28
5.33
5.38
5.41
5.43
5.45
5.45
5.45
5.43
5.41
5.37
5.32
1.14
1.48
2.13
3.70
0.20
0.38
0.54
0.69
0.85
0.99
1.14
1.28
1.41
1.55
1.68
1.81
1.94
2.07
2.19
2.31
2.44
2.55
2.67
2.79
2.90
3.01
3.12
3.23
3.34
3.44
3.55
3.65
3.75
3.85
3.94
4.04
4.13
4.22
4.31
4.40
4.49
4.57
4.65
4.73
4.81
4.89
4.96
5.03
5.10
5.17
5.24
5.30
5.36
5.42
5.48
5.53
5.59
5.64
5.69
5.73
5.82
5.89
5.96
6.01
6.05
6.09
6.11
6.12
6.12
6.11
6.08
6.05
6.00
5.94
1.26
1.64
2.36
4.12
0.22
0.41
0.59
0.77
0.93
1.10
1.26
1.41
1.57
1.72
1.86
2.01
2.15
2.29
2.43
2.57
2.70
2.84
2.97
3.10
3.22
3.35
3.47
3.59
3.71
3.83
3.95
4.06
4.17
4.28
4.39
4.50
4.60
4.70
4.80
4.90
4.99
5.09
5.18
5.27
5.35
5.44
5.52
5.60
5.68
5.75
5.83
5.90
5.96
6.03
6.09
6.15
6.21
6.26
6.31
6.36
6.45
6.53
6.60
6.65
6.69
6.72
6.74
6.74
6.73
6.71
6.67
6.62
6.55
6.47
1.38
1.80
2.60
4.53
0.24
0.45
0.65
0.84
1.02
1.20
1.38
1.55
1.72
1.88
2.05
2.21
2.36
2.52
2.67
2.82
2.97
3.12
3.26
3.41
3.55
3.68
3.82
3.95
4.09
4.22
4.34
4.47
4.59
4.71
4.83
4.95
5.06
5.17
5.28
5.39
5.49
5.60
5.70
5.79
5.89
5.98
6.07
6.15
6.24
6.32
6.40
6.47
6.54
6.61
6.68
6.74
6.80
6.86
6.91
6.97
7.06
7.14
7.20
7.25
7.29
7.31
7.32
7.31
7.29
7.25
7.19
7.12
7.03
6.92
1.50
1.96
2.83
4.94
0.26
0.49
0.70
0.91
1.11
1.30
1.50
1.68
1.87
2.05
2.23
2.40
2.57
2.74
2.91
3.08
3.24
3.40
3.56
3.71
3.87
4.02
4.16
4.31
4.45
4.60
4.73
4.87
5.01
5.14
5.27
5.39
5.52
5.64
5.75
5.87
5.98
6.09
6.20
6.30
6.41
6.50
6.60
6.69
6.78
6.87
6.95
7.03
7.11
7.18
7.25
7.31
7.38
7.43
7.49
7.54
7.63
7.71
7.77
7.82
7.84
7.86
7.85
7.83
7.78
7.72
7.64
7.54
7.42
7.28
112
125
132
140
150
160
180
200
2.66
3.50
5.07
8.72
0.45
0.85
1.24
1.61
1.97
2.32
2.66
3.00
3.34
3.66
3.99
4.30
4.61
4.92
5.22
5.52
5.81
6.09
6.37
6.64
6.91
7.17
7.43
7.68
7.92
8.16
8.39
8.61
8.83
9.04
9.24
9.44
9.63
9.81
9.98
10.15
10.30
10.45
10.59
10.72
10.84
10.96
11.06
11.16
11.24
11.32
11.38
11.44
11.49
11.52
11.54
11.56
11.56
11.55
11.53
11.50
11.40
2.89
3.80
5.50
9.41
0.49
0.92
1.34
1.74
2.13
2.52
2.89
3.26
3.62
3.98
4.33
4.67
5.01
5.34
5.67
5.99
6.30
6.61
6.91
7.20
7.49
7.77
8.04
8.31
8.56
8.82
9.06
9.29
9.52
9.74
9.95
10.15
10.35
10.53
10.70
10.87
11.02
11.17
11.31
11.43
11.54
11.65
11.74
11.82
11.89
11.95
12.00
12.03
12.05
12.06
12.06
12.04
12.01
11.97
3.35
4.40
6.36
10.70
0.56
1.07
1.55
2.02
2.47
2.91
3.35
3.77
4.19
4.60
5.01
5.40
5.79
6.17
6.54
6.91
7.26
7.61
7.95
8.28
8.60
8.91
9.22
9.51
9.79
10.07
10.33
10.58
10.82
11.05
11.27
11.47
11.67
11.85
12.01
12.17
12.31
12.43
12.55
12.65
12.73
12.80
12.85
12.89
12.91
12.91
12.90
12.87
12.82
12.76
3.80
4.99
7.19
11.88
0.64
1.21
1.76
2.29
2.80
3.30
3.80
4.28
4.75
5.22
5.67
6.12
6.55
6.98
7.40
7.80
8.20
8.58
8.96
9.32
9.67
10.01
10.33
10.64
10.94
11.23
11.50
11.76
12.00
12.23
12.44
12.64
12.81
12.98
13.12
13.25
13.36
13.45
13.52
13.57
13.60
13.61
13.60
13.57
13.51
Additional
per belt for
1,01 1,06
to
to
1,05 1,26
0.01
0.01
0.02
0.04
0.00
0.00
0.00
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.04
0.04
0.04
0.04
0.04
0.04
0.04
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.07
0.07
0.07
0.07
0.07
0.07
0.07
0.08
0.08
0.08
0.08
0.08
0.09
0.09
0.09
0.09
0.10
0.10
0.10
0.11
0.11
0.11
0.11
0.12
0.12
0.06
0.09
0.13
0.26
0.01
0.02
0.03
0.04
0.05
0.06
0.06
0.07
0.08
0.09
0.10
0.11
0.12
0.13
0.14
0.15
0.16
0.17
0.18
0.19
0.19
0.20
0.21
0.22
0.23
0.24
0.25
0.26
0.27
0.28
0.29
0.30
0.31
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.44
0.45
0.46
0.47
0.48
0.49
0.50
0.51
0.52
0.54
0.56
0.57
0.59
0.61
0.63
0.65
0.67
0.69
0.70
0.72
0.74
0.76
0.78
RED POWER II
power (kW)
speed ratio i
1,27 >1,57
to
1,57
0.09
0.12
0.19
0.37
0.01
0.03
0.04
0.05
0.07
0.08
0.09
0.11
0.12
0.13
0.14
0.16
0.17
0.18
0.20
0.21
0.22
0.24
0.25
0.26
0.28
0.29
0.30
0.32
0.33
0.34
0.35
0.37
0.38
0.39
0.41
0.42
0.43
0.45
0.46
0.47
0.49
0.50
0.51
0.53
0.54
0.55
0.57
0.58
0.59
0.60
0.62
0.63
0.64
0.66
0.67
0.68
0.70
0.71
0.72
0.74
0.76
0.79
0.81
0.84
0.87
0.89
0.92
0.95
0.97
1.00
1.03
1.05
1.08
1.10
0.11
0.15
0.23
0.46
0.02
0.03
0.05
0.06
0.08
0.10
0.11
0.13
0.15
0.16
0.18
0.19
0.21
0.23
0.24
0.26
0.27
0.29
0.31
0.32
0.34
0.35
0.37
0.39
0.40
0.42
0.44
0.45
0.47
0.48
0.50
0.52
0.53
0.55
0.56
0.58
0.60
0.61
0.63
0.64
0.66
0.68
0.69
0.71
0.73
0.74
0.76
0.77
0.79
0.81
0.82
0.84
0.85
0.87
0.89
0.90
0.93
0.97
1.00
1.03
1.06
1.10
1.13
1.16
1.19
1.22
1.26
1.29
1.32
1.35
v (m/s)
Dynamically balanced (for details see DIN 2211)
Note: Pulley diameters shown are outside diameters for sections 3V/9N, 3V/9J.
Pulleys
87
Power Ratings
optibelt RED POWER II Section SPA
Nominal Power Rating PN (kW) for = 180 and Ld = 2500 mm
Statically balanced
v (m/s)
Pulleys
Table 32
nk
(min-1)
90
100
112
118
125
132
140
150
160
180
200
224
250
280
315
700
950
1450
2850
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
5100
5200
5300
5400
5500
5600
5700
5800
5900
6000
6100
6200
6300
6400
6500
6600
6700
6800
6900
7000
1.34
1.72
2.40
3.91
0.26
0.47
0.66
0.84
1.02
1.18
1.34
1.50
1.64
1.79
1.93
2.07
2.20
2.33
2.46
2.59
2.71
2.83
2.94
3.06
3.17
3.27
3.38
3.48
3.58
3.68
3.77
3.87
3.96
4.04
4.13
4.21
4.29
4.37
4.44
4.51
4.58
4.65
4.71
4.77
4.83
4.88
4.94
4.99
5.03
5.07
5.12
5.15
5.19
5.22
5.25
5.27
5.29
5.31
5.33
5.34
5.35
5.35
5.36
5.36
5.35
5.34
5.33
5.31
5.30
5.27
5.25
5.22
5.18
5.14
1.73
2.24
3.16
5.29
0.32
0.59
0.84
1.08
1.30
1.52
1.73
1.94
2.14
2.34
2.53
2.71
2.90
3.07
3.25
3.42
3.59
3.76
3.92
4.08
4.23
4.38
4.53
4.68
4.82
4.96
5.09
5.23
5.36
5.48
5.61
5.73
5.84
5.96
6.07
6.17
6.27
6.37
6.47
6.56
6.65
6.74
6.82
6.89
6.97
7.04
7.11
7.17
7.23
7.28
7.33
7.38
7.42
7.46
7.49
7.52
7.54
7.56
7.58
7.59
7.60
7.60
7.60
7.59
7.58
7.56
7.54
7.51
7.48
7.44
2.20
2.86
4.07
6.91
0.40
0.74
1.05
1.36
1.65
1.93
2.20
2.47
2.73
2.98
3.23
3.48
3.72
3.96
4.19
4.41
4.64
4.86
5.07
5.28
5.49
5.69
5.89
6.09
6.28
6.46
6.65
6.83
7.00
7.17
7.34
7.50
7.66
7.81
7.96
8.10
8.24
8.38
8.51
8.63
8.76
8.87
8.98
9.09
9.19
9.29
9.38
9.46
9.54
9.62
9.69
9.75
9.81
9.86
9.91
9.95
9.98
10.01
10.04
10.05
10.06
10.06
10.06
10.05
10.04
10.01
9.98
9.95
9.90
9.85
2.43
3.16
4.52
7.71
0.44
0.81
1.16
1.49
1.82
2.13
2.43
2.73
3.02
3.31
3.59
3.86
4.13
4.39
4.65
4.91
5.16
5.40
5.64
5.88
6.11
6.34
6.56
6.78
7.00
7.21
7.41
7.61
7.81
8.00
8.19
8.37
8.54
8.72
8.88
9.04
9.20
9.35
9.50
9.64
9.77
9.90
10.03
10.15
10.26
10.36
10.46
10.56
10.65
10.73
10.81
10.87
10.94
10.99
11.04
11.09
11.12
11.15
11.17
11.19
11.19
11.19
11.19
11.17
11.15
11.12
11.08
11.03
10.98
10.91
2.70
3.52
5.04
8.63
0.48
0.89
1.28
1.65
2.01
2.36
2.70
3.04
3.36
3.68
3.99
4.30
4.60
4.90
5.19
5.48
5.76
6.03
6.30
6.57
6.83
7.09
7.34
7.58
7.82
8.06
8.29
8.52
8.74
8.95
9.16
9.36
9.56
9.75
9.94
10.12
10.29
10.46
10.62
10.78
10.93
11.07
11.21
11.34
11.46
11.58
11.69
11.79
11.89
11.97
12.05
12.13
12.19
12.25
12.30
12.34
12.37
12.40
12.42
12.42
12.42
12.41
12.40
12.37
12.33
12.29
12.24
12.17
12.10
12.02
2.97
3.88
5.56
9.53
0.52
0.98
1.40
1.81
2.21
2.60
2.97
3.34
3.70
4.05
4.40
4.74
5.07
5.40
5.72
6.04
6.35
6.66
6.96
7.25
7.54
7.83
8.10
8.38
8.64
8.90
9.16
9.41
9.65
9.89
10.12
10.34
10.56
10.77
10.97
11.17
11.36
11.55
11.72
11.89
12.05
12.21
12.35
12.49
12.63
12.75
12.86
12.97
13.07
13.16
13.24
13.31
13.38
13.43
13.48
13.51
13.54
13.56
13.57
13.56
13.55
13.53
13.50
13.46
13.40
3.28
4.28
6.15
10.54
0.57
1.07
1.54
2.00
2.43
2.86
3.28
3.68
4.08
4.48
4.86
5.24
5.61
5.97
6.33
6.68
7.03
7.37
7.70
8.03
8.35
8.66
8.97
9.27
9.57
9.85
10.14
10.41
10.68
10.94
11.19
11.44
11.67
11.90
12.13
12.34
12.55
12.75
12.94
13.12
13.29
13.46
13.61
13.76
13.90
14.03
14.14
14.25
14.35
14.44
14.52
14.59
14.65
14.69
14.73
14.76
14.77
14.77
14.76
14.75
14.71
14.67
14.61
14.55
14.47
3.66
4.78
6.88
11.79
0.64
1.19
1.72
2.22
2.71
3.19
3.66
4.11
4.56
5.00
5.43
5.86
6.27
6.68
7.08
7.48
7.86
8.25
8.62
8.98
9.34
9.69
10.04
10.37
10.70
11.02
11.33
11.64
11.93
12.22
12.50
12.77
13.03
13.28
13.52
13.76
13.98
14.19
14.40
14.59
14.77
14.95
15.11
15.26
15.40
15.53
15.65
15.75
15.84
15.92
15.99
16.05
16.09
16.12
16.14
16.15
16.14
16.11
16.08
16.02
4.03
5.28
7.61
13.00
0.70
1.31
1.89
2.45
2.99
3.52
4.03
4.54
5.04
5.52
6.00
6.47
6.93
7.38
7.83
8.26
8.69
9.11
9.52
9.93
10.32
10.71
11.09
11.45
11.81
12.16
12.50
12.84
13.16
13.47
13.77
14.06
14.34
14.61
14.87
15.12
15.35
15.58
15.79
15.99
16.18
16.35
16.52
16.66
16.80
16.92
17.03
17.13
17.21
17.27
17.32
17.36
17.38
17.38
17.37
4.78
6.27
9.03
15.33
0.82
1.54
2.23
2.90
3.54
4.17
4.78
5.39
5.98
6.56
7.12
7.68
8.23
8.77
9.30
9.81
10.32
10.81
11.30
11.77
12.24
12.69
13.13
13.55
13.97
14.37
14.76
15.14
15.51
15.86
16.20
16.52
16.83
17.12
17.40
17.66
17.91
18.14
18.35
18.55
18.73
18.89
19.04
19.17
19.27
19.36
19.43
19.48
19.52
19.53
5.53
7.24
10.43
17.52
0.94
1.78
2.57
3.34
4.09
4.81
5.53
6.22
6.91
7.58
8.23
8.88
9.51
10.13
10.73
11.33
11.91
12.47
13.03
13.56
14.09
14.60
15.09
15.57
16.03
16.48
16.91
17.32
17.72
18.09
18.45
18.79
19.11
19.41
19.69
19.95
20.19
20.41
20.60
20.77
20.92
21.05
21.15
21.22
21.28
6.41
8.40
12.08
19.96
1.09
2.06
2.98
3.87
4.73
5.58
6.41
7.22
8.01
8.78
9.54
10.29
11.02
11.73
12.42
13.10
13.76
14.41
15.03
15.64
16.22
16.79
17.34
17.87
18.37
18.85
19.31
19.75
20.17
20.55
20.92
21.26
21.57
21.85
22.11
22.34
22.53
22.70
22.84
22.95
7.35
9.63
13.81
22.35
1.24
2.35
3.41
4.44
5.43
6.40
7.35
8.28
9.18
10.07
10.94
11.78
12.61
13.42
14.20
14.96
15.70
16.42
17.11
17.78
18.43
19.04
19.63
20.19
20.73
21.23
21.70
22.14
22.55
22.93
23.27
23.57
23.84
24.08
24.27
8.42
11.03
15.75
24.75
1.42
2.70
3.91
5.08
6.23
7.34
8.42
9.48
10.52
11.53
12.51
13.47
14.41
15.31
16.19
17.04
17.86
18.64
19.40
20.12
20.81
21.46
22.08
22.65
23.19
23.69
24.15
24.56
24.93
25.25
9.66
12.62
17.93
27.01
1.63
3.09
4.49
5.83
7.14
8.42
9.66
10.87
12.05
13.19
14.31
15.39
16.43
17.44
18.41
19.34
20.24
21.08
21.89
22.65
23.36
24.02
24.64
25.20
25.70
26.15
26.54
26.87
27.13
Additional
per belt for
1,01 1,06
to
to
1,05 1,26
0.02
0.03
0.05
0.09
0.00
0.01
0.01
0.01
0.02
0.02
0.02
0.03
0.03
0.03
0.04
0.04
0.04
0.05
0.05
0.05
0.06
0.06
0.06
0.07
0.07
0.07
0.08
0.08
0.08
0.09
0.09
0.09
0.10
0.10
0.10
0.11
0.11
0.11
0.12
0.12
0.12
0.13
0.13
0.13
0.14
0.14
0.14
0.15
0.15
0.15
0.16
0.16
0.16
0.17
0.17
0.17
0.18
0.18
0.18
0.19
0.19
0.19
0.20
0.20
0.20
0.21
0.21
0.21
0.22
0.22
0.22
0.23
0.23
0.23
0.15
0.20
0.31
0.61
0.02
0.04
0.06
0.09
0.11
0.13
0.15
0.17
0.19
0.22
0.24
0.26
0.28
0.30
0.32
0.34
0.37
0.39
0.41
0.43
0.45
0.47
0.50
0.52
0.54
0.56
0.58
0.60
0.62
0.65
0.67
0.69
0.71
0.73
0.75
0.77
0.80
0.82
0.84
0.86
0.88
0.90
0.93
0.95
0.97
0.99
1.01
1.03
1.05
1.08
1.10
1.12
1.14
1.16
1.18
1.21
1.23
1.25
1.27
1.29
1.31
1.33
1.36
1.38
1.40
1.42
1.44
1.46
1.49
1.51
RED POWER II
power (kW)
speed ratio i
1,27 >1,57
to
1,57
0.21
0.29
0.44
0.87
0.03
0.06
0.09
0.12
0.15
0.18
0.21
0.24
0.27
0.31
0.34
0.37
0.40
0.43
0.46
0.49
0.52
0.55
0.58
0.61
0.64
0.67
0.70
0.73
0.76
0.79
0.82
0.86
0.89
0.92
0.95
0.98
1.01
1.04
1.07
1.10
1.13
1.16
1.19
1.22
1.25
1.28
1.31
1.34
1.37
1.41
1.44
1.47
1.50
1.53
1.56
1.59
1.62
1.65
1.68
1.71
1.74
1.77
1.80
1.83
1.86
1.89
1.92
1.96
1.99
2.02
2.05
2.08
2.11
2.14
v (m/s)
Dynamically balanced (for details see DIN 2211)
88
Pulleys
0.26
0.36
0.54
1.07
0.04
0.07
0.11
0.15
0.19
0.22
0.26
0.30
0.34
0.37
0.41
0.45
0.49
0.52
0.56
0.60
0.64
0.67
0.71
0.75
0.79
0.82
0.86
0.90
0.94
0.97
1.01
1.05
1.09
1.12
1.16
1.20
1.24
1.27
1.31
1.35
1.39
1.42
1.46
1.50
1.54
1.57
1.61
1.65
1.69
1.72
1.76
1.80
1.84
1.87
1.91
1.95
1.99
2.02
2.06
2.10
2.13
2.17
2.21
2.25
2.28
2.32
2.36
2.40
2.43
2.47
2.51
2.55
2.58
2.62
Power Ratings
optibelt RED POWER II Section SPB, 5V/15N, 5V/15J
Nominal Power Rating PN (kW) for = 180 and Ld = 3550 mm
Statically balanced
v (m/s)
Pulleys
Table 33
nk
(min-1)
140
150
160
180
190
200
212
224
236
250
280
315
700
950
1450
2850
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
5100
5200
5300
5400
5500
4.02
5.19
7.33
12.11
0.74
1.36
1.94
2.49
3.02
3.52
4.02
4.50
4.96
5.42
5.86
6.29
6.72
7.13
7.54
7.93
8.32
8.69
9.06
9.42
9.77
10.11
10.44
10.77
11.08
11.39
11.68
11.97
12.24
12.51
12.76
13.01
13.24
13.47
13.68
13.89
14.08
14.26
14.43
14.59
14.74
14.87
15.00
15.11
15.20
15.29
15.36
15.42
15.47
15.50
15.52
15.53
15.52
15.50
15.46
4.64
6.02
8.55
14.21
0.84
1.56
2.23
2.86
3.47
4.07
4.64
5.20
5.75
6.28
6.81
7.32
7.82
8.31
8.78
9.25
9.71
10.16
10.59
11.02
11.44
11.84
12.24
12.62
12.99
13.36
13.71
14.05
14.38
14.69
15.00
15.29
15.57
15.84
16.10
16.34
16.57
16.79
16.99
17.18
17.35
17.52
17.66
17.79
17.91
18.01
18.10
18.17
18.22
18.26
18.28
18.29
18.28
18.25
18.20
5.27
6.84
9.75
16.28
0.94
1.75
2.51
3.23
3.93
4.61
5.27
5.91
6.53
7.15
7.75
8.33
8.91
9.47
10.02
10.56
11.09
11.60
12.11
12.60
13.08
13.55
14.00
14.45
14.88
15.29
15.70
16.09
16.47
16.83
17.18
17.52
17.84
18.15
18.44
18.72
18.98
19.23
19.46
19.67
19.87
20.05
20.21
20.35
20.48
20.59
20.68
20.75
20.80
20.84
20.85
20.84
20.82
20.77
20.70
6.50
8.48
12.12
20.29
1.14
2.14
3.07
3.97
4.84
5.68
6.50
7.30
8.09
8.86
9.61
10.35
11.07
11.78
12.47
13.14
13.81
14.45
15.09
15.70
16.30
16.89
17.46
18.01
18.55
19.07
19.57
20.05
20.52
20.96
21.39
21.80
22.19
22.56
22.91
23.24
23.54
23.83
24.09
24.33
24.55
24.74
24.91
25.06
25.18
25.28
25.35
25.39
25.41
25.40
7.12
9.29
13.30
22.22
1.24
2.33
3.35
4.34
5.29
6.21
7.12
8.00
8.86
9.71
10.53
11.34
12.14
12.91
13.68
14.42
15.15
15.86
16.55
17.23
17.88
18.52
19.15
19.75
20.33
20.90
21.44
21.97
22.47
22.95
23.41
23.85
24.27
24.66
25.03
25.37
25.69
25.99
26.25
26.50
26.71
26.90
27.06
27.19
27.30
7.73
10.09
14.46
24.11
1.34
2.52
3.63
4.70
5.74
6.74
7.73
8.69
9.63
10.55
11.45
12.33
13.20
14.04
14.87
15.68
16.47
17.24
18.00
18.73
19.44
20.13
20.81
21.46
22.09
22.69
23.28
23.84
24.37
24.88
25.37
25.83
26.27
26.68
27.06
27.42
27.74
28.04
28.30
28.54
28.75
28.92
29.06
29.17
29.25
8.46
11.05
15.84
26.31
1.46
2.75
3.97
5.14
6.27
7.38
8.46
9.51
10.54
11.55
12.54
13.51
14.46
15.39
16.29
17.18
18.04
18.89
19.71
20.51
21.28
22.03
22.76
23.46
24.14
24.79
25.42
26.02
26.59
27.13
27.64
28.13
28.58
29.00
29.39
29.75
30.07
30.36
30.61
30.83
9.18
12.01
17.21
28.43
1.58
2.98
4.30
5.57
6.81
8.01
9.18
10.33
11.45
12.55
13.63
14.68
15.71
16.72
17.70
18.66
19.60
20.51
21.39
22.25
23.09
23.90
24.67
25.43
26.15
26.84
27.50
28.13
28.73
29.29
29.82
30.32
30.78
31.20
31.59
31.94
32.25
32.52
32.75
32.94
9.91
12.96
18.57
30.48
1.70
3.20
4.63
6.00
7.34
8.64
9.91
11.15
12.36
13.55
14.71
15.84
16.95
18.04
19.09
20.13
21.13
22.11
23.05
23.97
24.86
25.72
26.54
27.34
28.10
28.82
29.52
30.17
30.79
31.37
31.91
32.41
32.87
33.28
33.66
10.74
14.05
20.13
32.78
1.84
3.47
5.02
6.51
7.96
9.37
10.74
12.09
13.41
14.69
15.95
17.18
18.38
19.56
20.70
21.81
22.89
23.94
24.96
25.94
26.88
27.80
28.67
29.51
30.31
31.06
31.78
32.45
33.09
33.67
34.21
34.71
35.15
35.55
35.89
12.52
16.38
23.41
37.30
2.13
4.03
5.84
7.58
9.27
10.92
12.52
14.09
15.63
17.13
18.59
20.01
21.40
22.75
24.06
25.34
26.57
27.76
28.90
30.00
31.05
32.06
33.01
33.92
34.77
35.56
36.30
36.98
37.61
38.17
14.57
19.05
27.12
41.87
2.47
4.68
6.78
8.81
10.78
12.70
14.57
16.40
18.18
19.91
21.60
23.24
24.83
26.37
27.86
29.30
30.68
32.00
33.26
34.47
35.60
36.68
37.68
38.61
39.47
40.26
40.96
41.59
42.13
355
375
400
3.05
5.79
8.39
10.91
13.35
15.72
18.02
20.27
22.44
24.55
26.59
28.56
30.46
32.28
34.02
35.67
37.24
38.71
40.10
41.38
42.55
43.63
44.59
45.43
3.29
6.24
9.06
11.77
14.40
16.96
19.44
21.85
24.18
26.43
28.61
30.70
32.71
34.62
36.44
38.16
39.78
41.28
42.68
43.95
45.10
46.13
Additional
per belt for
1,01 1,06
to
to
1,05 1,26
0.05
0.07
0.11
0.21
0.01
0.01
0.02
0.03
0.04
0.04
0.05
0.06
0.07
0.07
0.08
0.09
0.10
0.10
0.11
0.12
0.12
0.13
0.14
0.15
0.15
0.16
0.17
0.18
0.18
0.19
0.20
0.21
0.21
0.22
0.23
0.23
0.24
0.25
0.26
0.26
0.27
0.28
0.29
0.29
0.30
0.31
0.32
0.32
0.33
0.34
0.34
0.35
0.36
0.37
0.37
0.38
0.39
0.40
0.40
0.33
0.45
0.69
1.35
0.05
0.09
0.14
0.19
0.24
0.28
0.33
0.38
0.43
0.47
0.52
0.57
0.62
0.66
0.71
0.76
0.81
0.85
0.90
0.95
0.99
1.04
1.09
1.14
1.18
1.23
1.28
1.33
1.37
1.42
1.47
1.52
1.56
1.61
1.66
1.71
1.75
1.80
1.85
1.89
1.94
1.99
2.04
2.08
2.13
2.18
2.23
2.27
2.32
2.37
2.42
2.46
2.51
2.56
2.61
RED POWER II
power (kW)
speed ratio i
1,27 >1,57
to
1,57
0.47
0.64
0.97
1.92
0.07
0.13
0.20
0.27
0.34
0.40
0.47
0.54
0.61
0.67
0.74
0.81
0.87
0.94
1.01
1.08
1.14
1.21
1.28
1.34
1.41
1.48
1.55
1.61
1.68
1.75
1.82
1.88
1.95
2.02
2.08
2.15
2.22
2.29
2.35
2.42
2.49
2.55
2.62
2.69
2.76
2.82
2.89
2.96
3.03
3.09
3.16
3.23
3.29
3.36
3.43
3.50
3.56
3.63
3.70
0.58
0.78
1.20
2.35
0.08
0.16
0.25
0.33
0.41
0.49
0.58
0.66
0.74
0.82
0.91
0.99
1.07
1.15
1.24
1.32
1.40
1.48
1.57
1.65
1.73
1.81
1.90
1.98
2.06
2.14
2.23
2.31
2.39
2.47
2.56
2.64
2.72
2.80
2.89
2.97
3.05
3.13
3.21
3.30
3.38
3.46
3.54
3.63
3.71
3.79
3.87
3.96
4.04
4.12
4.20
4.29
4.37
4.45
4.53
Pulleys
89
Power Ratings
optibelt RED POWER II Section SPC
Nominal Power Rating PN (kW) for = 180 and Ld = 5600 mm
Statically balanced
v (m/s)
Pulleys
Table 34
nk
(min-1)
224
250
280
300
315
335
355
375
400
450
500
560
630
710
700
950
1450
2850
50
100
200
300
350
400
450
500
550
600
650
700
750
800
850
900
950
1000
1050
1100
1150
1200
1250
1300
1350
1400
1450
1500
1550
1600
1650
1700
1750
1800
1850
1900
1950
2000
2050
2100
2150
2200
2250
2300
2350
2400
2450
2500
2550
2600
2650
2700
2750
2800
2850
2900
2950
3000
3050
3100
3150
3200
3250
3300
3350
3400
3450
3500
11.09
14.23
19.73
29.03
1.12
2.07
3.80
5.40
6.17
6.92
7.65
8.36
9.06
9.75
10.43
11.09
11.74
12.38
13.01
13.63
14.23
14.83
15.41
15.99
16.56
17.11
17.65
18.19
18.71
19.22
19.73
20.22
20.70
21.17
21.63
22.08
22.51
22.94
23.35
23.76
24.15
24.53
24.90
25.25
25.60
25.93
26.25
26.55
26.84
27.12
27.39
27.64
27.88
28.11
28.32
28.52
28.70
28.87
29.03
29.17
29.29
29.40
29.50
29.58
29.64
29.69
29.72
29.73
29.73
29.71
29.68
29.63
13.84
17.84
24.86
36.59
1.35
2.52
4.67
6.67
7.63
8.57
9.49
10.39
11.28
12.15
13.00
13.84
14.67
15.48
16.28
17.07
17.84
18.60
19.35
20.08
20.81
21.51
22.21
22.89
23.56
24.22
24.86
25.49
26.10
26.71
27.29
27.86
28.42
28.97
29.50
30.01
30.51
30.99
31.46
31.91
32.34
32.76
33.16
33.55
33.92
34.27
34.60
34.91
35.21
35.49
35.75
35.99
36.21
36.41
36.59
36.75
36.90
37.02
37.12
37.20
37.25
37.29
37.31
37.30
37.27
37.21
37.14
37.04
16.98
21.94
30.63
44.44
1.63
3.04
5.66
8.11
9.30
10.45
11.59
12.71
13.80
14.88
15.94
16.98
18.00
19.01
20.01
20.98
21.94
22.88
23.81
24.72
25.62
26.49
27.36
28.20
29.03
29.84
30.63
31.40
32.16
32.90
33.62
34.32
35.00
35.66
36.30
36.92
37.52
38.11
38.66
39.20
39.72
40.21
40.68
41.13
41.56
41.96
42.33
42.69
43.01
43.32
43.59
43.85
44.07
44.27
44.44
44.59
44.70
44.79
44.85
44.88
44.88
44.85
44.79
19.05
24.64
34.38
49.11
1.80
3.39
6.32
9.07
10.40
11.70
12.98
14.24
15.47
16.68
17.88
19.05
20.21
21.34
22.46
23.56
24.64
25.70
26.74
27.76
28.77
29.75
30.72
31.66
32.59
33.50
34.38
35.24
36.09
36.91
37.70
38.48
39.23
39.96
40.67
41.35
42.00
42.63
43.24
43.82
44.37
44.90
45.40
45.87
46.32
46.73
47.12
47.48
47.80
48.10
48.37
48.60
48.80
20.59
26.64
37.14
52.30
1.94
3.64
6.81
9.79
11.23
12.64
14.02
15.38
16.72
18.03
19.32
20.59
21.84
23.07
24.28
25.47
26.64
27.79
28.91
30.02
31.10
32.17
33.21
34.22
35.22
36.19
37.14
38.07
38.97
39.84
40.70
41.52
42.32
43.09
43.84
44.56
45.25
45.91
46.55
47.15
47.72
48.27
48.78
49.26
49.71
50.12
50.51
50.85
51.17
51.45
51.69
51.90
52.07
22.64
29.28
40.75
24.66
31.90
44.28
26.67
34.48
47.72
29.16
37.66
51.90
34.06
43.88
59.81
38.86
49.88
67.09
44.48
56.80
74.92
50.84
64.44
82.69
57.82
72.55
2.12
3.98
7.46
10.74
12.32
13.87
15.40
16.89
18.37
19.81
21.24
22.64
24.01
25.36
26.69
28.00
29.28
30.54
31.78
32.99
34.17
35.34
36.47
37.58
38.67
39.72
40.75
41.75
42.73
43.67
44.59
45.47
46.33
47.15
47.94
48.70
49.43
50.12
50.78
51.40
51.99
52.54
53.05
53.53
53.97
54.37
54.73
55.05
2.30
4.32
8.11
11.68
13.41
15.10
16.77
18.40
20.01
21.58
23.14
24.66
26.16
27.63
29.08
30.50
31.90
33.26
34.60
35.92
37.20
38.45
39.68
40.88
42.04
43.18
44.28
45.35
46.39
47.39
48.36
49.30
50.20
51.06
51.89
52.67
53.42
54.13
54.80
55.43
56.01
56.56
57.06
57.52
57.93
58.29
58.61
58.88
2.47
4.66
8.76
12.63
14.50
16.33
18.13
19.90
21.64
23.34
25.02
26.67
28.29
29.88
31.44
32.98
34.48
35.95
37.39
38.80
40.18
41.52
42.83
44.11
45.35
46.55
47.72
48.85
49.95
51.00
52.02
52.99
53.93
54.82
55.66
56.47
57.23
57.94
58.60
59.22
59.79
60.31
60.78
2.69
5.09
9.56
13.80
15.84
17.85
19.82
21.76
23.66
25.53
27.36
29.16
30.93
32.66
34.36
36.03
37.66
39.26
40.82
42.34
43.83
45.27
46.68
48.05
49.37
50.66
51.90
53.09
54.25
55.35
56.41
57.42
58.38
59.29
60.14
60.95
61.70
62.40
63.04
63.62
64.14
64.61
65.01
3.13
5.93
11.16
16.12
18.52
20.87
23.17
25.44
27.66
29.83
31.97
34.06
36.11
38.12
40.09
42.00
43.88
45.70
47.48
49.21
50.89
52.51
54.08
55.60
57.06
58.47
59.81
61.09
62.31
63.47
64.56
65.59
66.54
67.43
68.25
68.99
69.65
70.24
3.57
6.76
12.75
18.42
21.16
23.85
26.48
29.06
31.59
34.07
36.49
38.86
41.18
43.44
45.65
47.80
49.88
51.91
53.88
55.77
57.61
59.37
61.06
62.69
64.23
65.70
67.09
68.40
69.62
70.77
71.82
72.78
73.65
4.09
7.75
14.64
21.15
24.30
27.38
30.40
33.34
36.23
39.05
41.80
44.48
47.09
49.63
52.10
54.49
56.80
59.03
61.17
63.22
65.19
67.06
68.84
70.52
72.09
73.56
74.92
76.17
4.69
8.90
16.82
24.31
27.92
31.44
34.89
38.25
41.53
44.72
47.82
50.84
53.76
56.58
59.30
61.92
64.44
66.83
69.12
71.28
73.32
75.23
77.01
78.64
80.14
81.49
82.69
5.37
10.20
19.29
27.86
31.98
36.00
39.92
43.72
47.42
51.01
54.48
57.82
61.04
64.13
67.08
69.89
72.55
75.05
77.40
79.57
81.57
83.40
85.03
Additional
per belt for
1,01 1,06
to
to
1,05 1,26
0.14
0.19
0.29
0.57
0.01
0.02
0.04
0.06
0.07
0.08
0.09
0.10
0.11
0.12
0.13
0.14
0.15
0.16
0.17
0.18
0.19
0.20
0.21
0.22
0.23
0.24
0.25
0.26
0.27
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
0.50
0.51
0.52
0.53
0.54
0.55
0.56
0.57
0.58
0.59
0.60
0.61
0.62
0.63
0.64
0.65
0.66
0.67
0.68
0.69
0.70
0.90
1.22
1.86
3.67
0.06
0.13
0.26
0.39
0.45
0.51
0.58
0.64
0.71
0.77
0.84
0.90
0.96
1.03
1.09
1.16
1.22
1.29
1.35
1.41
1.48
1.54
1.61
1.67
1.74
1.80
1.86
1.93
1.99
2.06
2.12
2.19
2.25
2.31
2.38
2.44
2.51
2.57
2.64
2.70
2.77
2.83
2.89
2.96
3.02
3.09
3.15
3.22
3.28
3.34
3.41
3.47
3.54
3.60
3.67
3.73
3.79
3.86
3.92
3.99
4.05
4.12
4.18
4.24
4.31
4.37
4.44
4.50
RED POWER II
power (kW)
speed ratio i
1,27 >1,57
to
1,57
1.28
1.73
2.65
5.20
0.09
0.18
0.37
0.55
0.64
0.73
0.82
0.91
1.00
1.10
1.19
1.28
1.37
1.46
1.55
1.64
1.73
1.83
1.92
2.01
2.10
2.19
2.28
2.37
2.46
2.56
2.65
2.74
2.83
2.92
3.01
3.10
3.19
3.29
3.38
3.47
3.56
3.65
3.74
3.83
3.92
4.02
4.11
4.20
4.29
4.38
4.47
4.56
4.66
4.75
4.84
4.93
5.02
5.11
5.20
5.29
5.39
5.48
5.57
5.66
5.75
5.84
5.93
6.02
6.12
6.21
6.30
6.39
v (m/s)
Dynamically balanced (for details see DIN 2211)
90
Pulleys
1.57
2.13
3.25
6.38
0.11
0.22
0.45
0.67
0.78
0.90
1.01
1.12
1.23
1.34
1.45
1.57
1.68
1.79
1.90
2.01
2.13
2.24
2.35
2.46
2.57
2.69
2.80
2.91
3.02
3.13
3.25
3.36
3.47
3.58
3.69
3.80
3.92
4.03
4.14
4.25
4.36
4.48
4.59
4.70
4.81
4.92
5.04
5.15
5.26
5.37
5.48
5.60
5.71
5.82
5.93
6.04
6.16
6.27
6.38
6.49
6.60
6.71
6.83
6.94
7.05
7.16
7.27
7.39
7.50
7.61
7.72
7.83
Power Ratings
optibelt RED POWER II Section 8V/25N, 8V/25J
Nominal Power Rating PN (kW) for = 180 and 8V 2500/6350 mm La
Statically balanced
v (m/s)
Pulleys
Table 35
nk
(min-1)
335
355
375
425
450
475
500
530
560
600
630
700
950
1450
50
100
150
200
250
300
350
400
450
500
550
600
650
700
750
800
850
900
950
1000
1050
1100
1150
1200
1250
1300
1350
1400
1450
1500
1550
1600
1650
1700
1750
1800
1850
1900
1950
2000
2050
2100
2150
2200
2250
28.21
35.60
46.12
2.80
5.23
7.50
9.68
11.78
13.81
15.79
17.71
19.58
21.40
23.18
24.90
26.58
28.21
29.79
31.32
32.80
34.23
35.60
36.92
38.19
39.40
40.55
41.64
42.66
43.63
44.53
45.36
46.12
46.82
47.44
47.98
48.46
48.85
49.16
49.40
49.54
49.61
49.59
49.47
49.27
48.98
48.59
48.10
47.51
31.31
39.51
50.96
3.08
5.76
8.28
10.69
13.03
15.29
17.49
19.63
21.71
23.74
25.71
27.63
29.50
31.31
33.07
34.77
36.41
37.99
39.51
40.97
42.36
43.69
44.95
46.14
47.25
48.30
49.26
50.15
50.96
51.68
52.32
52.88
53.34
53.72
54.00
54.18
54.27
54.25
54.13
53.91
53.58
53.14
52.59
51.93
51.15
34.38
43.34
55.57
3.36
6.29
9.05
11.70
14.27
16.76
19.17
21.53
23.82
26.05
28.23
30.34
32.39
34.38
36.30
38.16
39.96
41.69
43.34
44.93
46.44
47.87
49.23
50.50
51.69
52.80
53.82
54.74
55.57
56.31
56.95
57.48
57.91
58.24
58.46
58.56
58.55
58.42
58.18
57.81
57.31
56.69
55.93
55.04
54.02
41.89
52.60
66.08
4.04
7.60
10.98
14.22
17.35
20.40
23.36
26.24
29.04
31.77
34.42
36.99
39.48
41.89
44.21
46.45
48.59
50.64
52.60
54.46
56.21
57.85
59.39
60.81
62.12
63.30
64.36
65.29
66.08
66.74
67.26
67.64
67.87
67.95
67.86
67.62
67.22
66.65
65.90
64.98
45.56
57.04
70.75
4.39
8.26
11.93
15.46
18.88
22.20
25.43
28.57
31.62
34.59
37.47
40.26
42.96
45.56
48.06
50.47
52.77
54.96
57.04
59.01
60.85
62.57
64.16
65.62
66.94
68.12
69.15
70.03
70.75
71.32
71.72
71.95
72.00
71.88
71.57
71.07
70.38
69.49
68.40
67.10
49.17
61.36
75.01
4.73
8.91
12.88
16.70
20.40
24.00
27.49
30.88
34.18
37.38
40.48
43.48
46.38
49.17
51.85
54.41
56.85
59.17
61.36
63.41
65.32
67.10
68.72
70.18
71.49
72.63
73.60
74.39
75.01
75.43
75.66
75.70
75.53
75.15
74.56
52.72
65.54
78.82
5.07
9.56
13.83
17.94
21.92
25.78
29.53
33.18
36.72
40.14
43.46
46.67
49.76
52.72
55.56
58.26
60.83
63.26
65.54
67.66
69.62
71.42
73.04
74.49
75.75
76.82
77.70
78.36
78.82
79.07
79.09
78.87
78.43
77.74
76.80
56.90
70.37
82.80
5.47
10.34
14.96
19.42
23.73
27.91
31.97
35.91
39.73
43.43
46.99
50.43
53.74
56.90
59.91
62.77
65.47
68.01
70.37
72.55
74.54
76.33
77.93
79.31
80.47
81.41
82.12
82.58
82.80
82.76
60.98
74.99
86.09
5.88
11.11
16.09
20.89
25.53
30.02
34.39
38.62
42.71
46.66
50.48
54.14
57.64
60.98
64.16
67.15
69.96
72.58
74.99
77.19
79.18
80.93
82.45
83.72
84.74
85.50
85.98
86.18
86.09
85.70
66.28
80.81
89.34
6.42
12.14
17.59
22.83
27.91
32.82
37.58
42.19
46.64
50.92
55.04
58.97
62.73
66.28
69.64
72.78
75.69
78.37
80.81
82.99
84.91
86.55
87.90
88.95
89.70
90.12
90.20
70.14
84.91
90.88
6.82
12.91
18.71
24.29
29.68
34.90
39.96
44.84
49.54
54.06
58.39
62.52
66.44
70.14
73.61
76.83
79.79
82.49
84.91
87.04
88.86
90.36
91.53
92.36
92.83
92.93
92.64
710
800
79.91 89.95
94.65 103.34
7.88
14.95
21.67
28.13
34.37
40.39
46.19
51.77
57.12
62.23
67.07
71.65
75.93
79.91
83.57
86.89
89.86
92.45
94.65
96.43
97.79
98.70
99.14
99.10
98.55
9.07
17.22
24.96
32.40
39.56
46.44
53.04
59.35
65.35
71.02
76.34
81.28
85.83
89.95
93.62
96.83
99.53
101.71
103.34
104.39
104.83
104.64
Additional
per belt for
1,01 1,06
to
to
1,05 1,26
0.28
0.38
0.59
0.02
0.04
0.06
0.08
0.10
0.12
0.14
0.16
0.18
0.20
0.22
0.24
0.26
0.28
0.30
0.32
0.34
0.36
0.38
0.40
0.42
0.44
0.46
0.49
0.51
0.53
0.55
0.57
0.59
0.61
0.63
0.65
0.67
0.69
0.71
0.73
0.75
0.77
0.79
0.81
0.83
0.85
0.87
0.89
0.91
1.83
2.48
3.79
0.13
0.26
0.39
0.52
0.65
0.78
0.91
1.05
1.18
1.31
1.44
1.57
1.70
1.83
1.96
2.09
2.22
2.35
2.48
2.61
2.74
2.88
3.01
3.14
3.27
3.40
3.53
3.66
3.79
3.92
4.05
4.18
4.31
4.44
4.57
4.70
4.84
4.97
5.10
5.23
5.36
5.49
5.62
5.75
5.88
RED POWER II
power (kW)
speed ratio i
1,27 >1,57
to
1,57
2.60
3.52
5.38
0.19
0.37
0.56
0.74
0.93
1.11
1.30
1.48
1.67
1.86
2.04
2.23
2.41
2.60
2.78
2.97
3.15
3.34
3.52
3.71
3.90
4.08
4.27
4.45
4.64
4.82
5.01
5.19
5.38
5.57
5.75
5.94
6.12
6.31
6.49
6.68
6.86
7.05
7.23
7.42
7.61
7.79
7.98
8.16
8.35
3.18
4.32
6.60
0.23
0.45
0.68
0.91
1.14
1.36
1.59
1.82
2.05
2.27
2.50
2.73
2.96
3.18
3.41
3.64
3.87
4.09
4.32
4.55
4.78
5.00
5.23
5.46
5.69
5.91
6.14
6.37
6.60
6.82
7.05
7.28
7.51
7.73
7.96
8.19
8.42
8.64
8.87
9.10
9.33
9.55
9.78
10.01
10.23
Pulleys
91
Power Ratings
optibelt SUPER TX M=S Section XPZ, 3VX
Nominal Power Rating PN (kW) for = 180 and Ld = 1600 mm
Statically balanced
v (m/s)
Pulleys
Table 36
nk
(min-1)
56
60
63
71
80
85
90
95
100
112
125
140
160
180
200
700
950
1450
2850
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
5100
5200
5300
5400
5500
5600
5800
6000
6200
6400
6600
6800
7000
7200
7400
7600
7800
8000
8200
8400
0.63
0.80
1.10
1.78
0.13
0.23
0.32
0.40
0.48
0.56
0.63
0.70
0.77
0.83
0.90
0.96
1.02
1.07
1.13
1.19
1.24
1.29
1.34
1.39
1.44
1.49
1.54
1.58
1.63
1.67
1.71
1.76
1.80
1.84
1.88
1.92
1.95
1.99
2.03
2.06
2.10
2.13
2.16
2.20
2.23
2.26
2.29
2.32
2.35
2.37
2.40
2.43
2.45
2.48
2.50
2.52
2.54
2.57
2.59
2.61
2.64
2.68
2.71
2.74
2.76
2.79
2.81
2.82
2.83
2.84
2.85
2.85
2.85
2.85
0.73
0.93
1.29
2.12
0.14
0.26
0.37
0.46
0.56
0.65
0.73
0.81
0.89
0.97
1.05
1.12
1.19
1.26
1.33
1.40
1.46
1.52
1.59
1.65
1.71
1.77
1.83
1.88
1.94
1.99
2.05
2.10
2.15
2.20
2.25
2.30
2.35
2.39
2.44
2.48
2.53
2.57
2.61
2.66
2.70
2.74
2.77
2.81
2.85
2.89
2.92
2.96
2.99
3.02
3.05
3.08
3.11
3.14
3.17
3.20
3.25
3.30
3.35
3.39
3.43
3.46
3.49
3.52
3.54
3.56
3.57
3.59
3.59
3.60
0.81
1.03
1.44
2.38
0.16
0.28
0.40
0.51
0.61
0.71
0.81
0.90
0.99
1.07
1.16
1.24
1.32
1.40
1.48
1.55
1.63
1.70
1.77
1.84
1.91
1.97
2.04
2.10
2.17
2.23
2.29
2.35
2.41
2.47
2.53
2.58
2.64
2.69
2.75
2.80
2.85
2.90
2.95
3.00
3.04
3.09
3.13
3.18
3.22
3.26
3.31
3.35
3.39
3.42
3.46
3.50
3.53
3.57
3.60
3.64
3.70
3.76
3.81
3.86
3.91
3.95
3.99
4.02
4.05
4.08
4.10
4.12
4.13
4.14
1.00
1.29
1.82
3.06
0.19
0.35
0.49
0.63
0.76
0.88
1.00
1.12
1.23
1.35
1.45
1.56
1.66
1.77
1.87
1.96
2.06
2.16
2.25
2.34
2.43
2.52
2.61
2.69
2.78
2.86
2.94
3.02
3.10
3.18
3.25
3.33
3.40
3.48
3.55
3.62
3.69
3.75
3.82
3.89
3.95
4.01
4.08
4.14
4.20
4.25
4.31
4.37
4.42
4.47
4.53
4.58
4.63
4.67
4.72
4.77
4.85
4.94
5.01
5.08
5.15
5.21
5.27
5.31
5.36
5.40
5.43
5.45
5.47
5.49
1.22
1.58
2.24
3.81
0.23
0.42
0.59
0.76
0.92
1.07
1.22
1.37
1.51
1.65
1.78
1.92
2.05
2.17
2.30
2.42
2.54
2.66
2.78
2.90
3.01
3.12
3.23
3.34
3.45
3.55
3.66
3.76
3.86
3.96
4.05
4.15
4.24
4.34
4.43
4.52
4.60
4.69
4.78
4.86
4.94
5.02
5.10
5.18
5.25
5.33
5.40
5.47
5.54
5.61
5.67
5.74
5.80
5.86
5.92
5.98
6.09
6.19
6.28
6.37
6.45
6.53
6.59
6.65
6.70
6.75
6.78
6.81
6.83
6.84
1.34
1.74
2.47
4.22
0.25
0.46
0.65
0.83
1.01
1.18
1.34
1.50
1.66
1.81
1.96
2.11
2.26
2.40
2.54
2.67
2.81
2.94
3.07
3.20
3.33
3.45
3.57
3.69
3.81
3.93
4.05
4.16
4.27
4.38
4.49
4.60
4.70
4.80
4.91
5.01
5.10
5.20
5.29
5.39
5.48
5.57
5.65
5.74
5.82
5.90
5.98
6.06
6.14
6.21
6.28
6.36
6.42
6.49
6.56
6.62
6.74
6.85
6.95
7.05
7.13
7.21
7.28
7.34
7.39
7.43
7.47
7.49
7.50
7.50
1.46
1.90
2.70
4.62
0.27
0.50
0.71
0.91
1.10
1.28
1.46
1.64
1.81
1.98
2.14
2.31
2.46
2.62
2.77
2.92
3.07
3.22
3.36
3.50
3.64
3.78
3.91
4.05
4.18
4.31
4.43
4.56
4.68
4.80
4.92
5.04
5.15
5.27
5.38
5.49
5.59
5.70
5.80
5.90
6.00
6.10
6.19
6.29
6.38
6.47
6.55
6.64
6.72
6.80
6.88
6.96
7.03
7.10
7.17
7.24
7.37
7.49
7.59
7.69
7.78
7.86
7.93
7.99
8.04
8.07
8.10
8.12
8.12
8.11
1.58
2.05
2.92
5.02
0.29
0.53
0.76
0.98
1.19
1.39
1.58
1.77
1.96
2.14
2.32
2.50
2.67
2.84
3.01
3.17
3.33
3.49
3.65
3.80
3.95
4.10
4.25
4.39
4.54
4.68
4.81
4.95
5.08
5.21
5.34
5.47
5.60
5.72
5.84
5.96
6.07
6.19
6.30
6.41
6.52
6.62
6.72
6.82
6.92
7.02
7.11
7.20
7.29
7.38
7.46
7.54
7.62
7.70
7.77
7.84
7.97
8.10
8.21
8.31
8.40
8.48
8.54
8.59
8.64
8.67
8.68
8.68
8.67
8.65
1.70
2.21
3.15
5.41
0.31
0.57
0.82
1.05
1.27
1.49
1.70
1.91
2.11
2.31
2.50
2.69
2.88
3.06
3.24
3.42
3.59
3.76
3.93
4.10
4.26
4.42
4.58
4.74
4.89
5.04
5.19
5.34
5.48
5.62
5.76
5.90
6.03
6.17
6.30
6.42
6.55
6.67
6.79
6.91
7.02
7.13
7.24
7.35
7.45
7.55
7.65
7.75
7.84
7.93
8.02
8.11
8.19
8.27
8.34
8.42
8.55
8.68
8.79
8.89
8.98
9.05
9.11
9.16
9.19
9.20
9.21
9.19
9.17
9.12
1.98
2.58
3.68
6.33
0.36
0.66
0.95
1.22
1.48
1.74
1.98
2.23
2.46
2.69
2.92
3.14
3.36
3.58
3.79
4.00
4.20
4.40
4.60
4.80
4.99
5.18
5.37
5.55
5.73
5.91
6.08
6.25
6.42
6.58
6.74
6.90
7.06
7.21
7.36
7.51
7.65
7.79
7.92
8.06
8.19
8.31
8.44
8.56
8.67
8.78
8.89
9.00
9.10
9.20
9.29
9.38
9.47
9.55
9.63
9.70
9.84
9.96
10.06
10.15
10.22
10.27
10.30
10.31
10.31
10.28
10.23
10.17
2.29
2.97
4.25
7.30
0.41
0.76
1.09
1.40
1.71
2.00
2.29
2.57
2.84
3.11
3.37
3.63
3.88
4.13
4.38
4.62
4.85
5.09
5.32
5.54
5.76
5.98
6.19
6.40
6.61
6.81
7.01
7.21
7.40
7.59
7.77
7.95
8.12
8.29
8.46
8.62
8.78
8.94
9.09
9.23
9.38
9.51
9.65
9.77
9.90
10.02
10.13
10.24
10.34
10.44
10.54
10.63
10.71
10.79
10.86
10.93
11.05
11.15
11.22
11.28
11.30
11.31
11.29
2.63
3.43
4.90
8.38
0.47
0.87
1.25
1.61
1.96
2.30
2.63
2.95
3.27
3.58
3.88
4.18
4.47
4.76
5.04
5.32
5.59
5.86
6.12
6.38
6.63
6.88
7.12
7.36
7.60
7.83
8.05
8.27
8.49
8.69
8.90
9.10
9.29
9.48
9.66
9.84
10.01
10.18
10.34
10.50
10.65
10.79
10.93
11.06
11.18
11.30
11.41
11.52
11.62
11.71
11.80
11.88
11.95
12.01
12.07
12.12
12.20
12.25
12.26
12.25
3.08
4.02
5.74
9.74
0.55
1.02
1.46
1.89
2.30
2.70
3.08
3.46
3.83
4.20
4.55
4.90
5.24
5.58
5.91
6.23
6.55
6.86
7.16
7.46
7.75
8.04
8.32
8.59
8.86
9.12
9.37
9.62
9.86
10.09
10.32
10.54
10.75
10.95
11.15
11.34
11.52
11.69
11.86
12.01
12.16
12.30
12.43
12.56
12.67
12.77
12.87
12.95
13.03
13.10
13.16
13.20
13.24
13.27
13.28
3.53
4.60
6.57
11.01
0.63
1.17
1.67
2.16
2.63
3.09
3.53
3.96
4.39
4.80
5.21
5.61
6.00
6.38
6.75
7.12
7.48
7.83
8.17
8.50
8.83
9.15
9.46
9.76
10.06
10.34
10.62
10.88
11.14
11.39
11.63
11.86
12.08
12.29
12.48
12.67
12.85
13.02
13.17
13.32
13.45
13.57
13.68
13.78
13.87
13.94
14.00
14.05
14.08
14.10
3.97
5.17
7.37
12.19
0.70
1.31
1.88
2.43
2.96
3.47
3.97
4.46
4.93
5.40
5.85
6.30
6.73
7.16
7.58
7.98
8.38
8.77
9.14
9.51
9.87
10.21
10.55
10.87
11.19
11.49
11.78
12.06
12.33
12.58
12.82
13.05
13.27
13.47
13.66
13.84
14.00
14.15
14.28
14.40
14.50
14.59
14.66
14.71
14.75
Additional
per belt for
1,01 1,06
to
to
1,05 1,26
0.01
0.01
0.02
0.04
0.00
0.00
0.00
0.00
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.04
0.04
0.04
0.04
0.04
0.04
0.04
0.04
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.07
0.07
0.07
0.07
0.07
0.07
0.08
0.08
0.08
0.08
0.09
0.09
0.09
0.09
0.10
0.10
0.10
0.10
SUPER TX M=S
0.06
0.08
0.12
0.23
0.01
0.02
0.02
0.03
0.04
0.05
0.06
0.06
0.07
0.08
0.09
0.10
0.10
0.11
0.12
0.13
0.14
0.14
0.15
0.16
0.17
0.18
0.18
0.19
0.20
0.21
0.22
0.22
0.23
0.24
0.25
0.26
0.26
0.27
0.28
0.29
0.30
0.30
0.31
0.32
0.33
0.34
0.34
0.35
0.36
0.37
0.38
0.38
0.39
0.40
0.41
0.42
0.42
0.43
0.44
0.45
0.46
0.48
0.50
0.51
0.53
0.54
0.56
0.58
0.59
0.61
0.62
0.64
0.66
0.67
power (kW)
speed ratio i
1,27 >1,57
to
1,57
0.08
0.11
0.16
0.32
0.01
0.02
0.03
0.05
0.06
0.07
0.08
0.09
0.10
0.11
0.12
0.14
0.15
0.16
0.17
0.18
0.19
0.20
0.22
0.23
0.24
0.25
0.26
0.27
0.28
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.47
0.48
0.49
0.50
0.51
0.52
0.53
0.54
0.56
0.57
0.58
0.59
0.60
0.61
0.62
0.64
0.66
0.68
0.70
0.73
0.75
0.77
0.79
0.82
0.84
0.86
0.89
0.91
0.93
0.95
0.10
0.13
0.20
0.40
0.01
0.03
0.04
0.06
0.07
0.08
0.10
0.11
0.13
0.14
0.15
0.17
0.18
0.19
0.21
0.22
0.24
0.25
0.26
0.28
0.29
0.31
0.32
0.33
0.35
0.36
0.38
0.39
0.40
0.42
0.43
0.45
0.46
0.47
0.49
0.50
0.52
0.53
0.54
0.56
0.57
0.58
0.60
0.61
0.63
0.64
0.65
0.67
0.68
0.70
0.71
0.72
0.74
0.75
0.77
0.78
0.81
0.84
0.86
0.89
0.92
0.95
0.97
1.00
1.03
1.06
1.09
1.11
1.14
1.17
v (m/s)
Dynamically balanced (for details see DIN 2211)
92
Pulleys
Note: Pulley diameters shown are outside diameters for sections 3VX.
Power Ratings
optibelt SUPER TX M=S Section XPA
Nominal Power Rating PN (kW) for = 180 and Ld = 2500 mm
Statically balanced
v (m/s)
Pulleys
Table 37
nk
(min-1)
71
75
80
90
100
112
118
125
140
160
180
200
224
250
280
700
950
1450
2850
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
5100
5200
5300
5400
5500
5600
5700
5800
5900
6000
6100
6200
6300
6400
6500
6600
6700
6800
6900
7000
0.97
1.25
1.75
2.88
0.19
0.34
0.48
0.61
0.74
0.86
0.97
1.09
1.20
1.30
1.41
1.51
1.61
1.70
1.80
1.89
1.98
2.07
2.15
2.24
2.32
2.40
2.48
2.56
2.63
2.71
2.78
2.85
2.92
2.98
3.05
3.11
3.18
3.24
3.30
3.35
3.41
3.46
3.52
3.57
3.62
3.66
3.71
3.75
3.79
3.83
3.87
3.91
3.94
3.97
4.00
4.03
4.06
4.08
4.11
4.13
4.15
4.16
4.18
4.19
4.20
4.21
4.22
4.22
4.22
4.22
4.22
4.22
4.21
4.20
1.14
1.47
2.08
3.49
0.21
0.39
0.56
0.71
0.86
1.00
1.14
1.28
1.41
1.53
1.66
1.78
1.90
2.02
2.13
2.25
2.36
2.47
2.57
2.68
2.78
2.88
2.98
3.07
3.17
3.26
3.35
3.44
3.53
3.62
3.70
3.78
3.86
3.94
4.02
4.09
4.16
4.23
4.30
4.37
4.43
4.50
4.56
4.61
4.67
4.73
4.78
4.83
4.88
4.92
4.97
5.01
5.05
5.09
5.12
5.15
5.18
5.21
5.24
5.26
5.28
5.30
5.32
5.33
5.34
5.35
5.36
5.36
5.36
5.36
1.35
1.75
2.48
4.23
0.25
0.46
0.65
0.83
1.01
1.18
1.35
1.51
1.67
1.82
1.98
2.12
2.27
2.41
2.55
2.69
2.83
2.96
3.09
3.22
3.35
3.48
3.60
3.72
3.84
3.95
4.07
4.18
4.29
4.40
4.50
4.61
4.71
4.81
4.91
5.00
5.09
5.18
5.27
5.36
5.44
5.52
5.60
5.68
5.75
5.82
5.89
5.96
6.03
6.09
6.15
6.20
6.26
6.31
6.36
6.41
6.45
6.49
6.53
6.56
6.59
6.62
6.65
6.67
6.69
6.71
6.73
6.74
6.75
6.75
1.76
2.29
3.29
5.71
0.31
0.58
0.83
1.08
1.31
1.54
1.76
1.98
2.19
2.40
2.60
2.80
3.00
3.20
3.39
3.58
3.76
3.95
4.13
4.31
4.48
4.65
4.82
4.99
5.16
5.32
5.48
5.63
5.79
5.94
6.09
6.23
6.38
6.52
6.65
6.79
6.92
7.05
7.17
7.29
7.41
7.53
7.64
7.75
7.86
7.96
8.06
8.16
8.25
8.34
8.43
8.51
8.59
8.67
8.74
8.81
8.87
8.93
8.99
9.04
9.09
9.14
9.18
9.22
9.25
9.28
9.30
9.32
9.34
9.35
2.17
2.84
4.10
7.16
0.38
0.71
1.02
1.32
1.61
1.89
2.17
2.44
2.71
2.97
3.23
3.48
3.73
3.97
4.22
4.46
4.69
4.92
5.15
5.38
5.60
5.82
6.03
6.25
6.46
6.66
6.86
7.06
7.26
7.45
7.64
7.82
8.00
8.18
8.36
8.53
8.69
8.86
9.01
9.17
9.32
9.47
9.61
9.75
9.88
10.01
10.14
10.26
10.38
10.49
10.60
10.70
10.80
10.89
10.98
11.06
11.14
11.22
11.28
11.35
11.41
11.46
11.51
11.55
11.58
11.62
11.64
11.66
11.67
11.68
2.66
3.48
5.05
8.86
0.46
0.86
1.24
1.61
1.96
2.31
2.66
2.99
3.32
3.65
3.97
4.28
4.59
4.90
5.20
5.50
5.79
6.08
6.36
6.64
6.92
7.19
7.46
7.73
7.99
8.24
8.49
8.74
8.98
9.22
9.45
9.68
9.91
10.13
10.34
10.55
10.75
10.95
11.15
11.33
11.52
11.70
11.87
12.04
12.20
12.35
12.50
12.64
12.78
12.91
13.04
13.16
13.27
13.37
13.47
13.56
13.65
13.73
13.80
13.86
13.92
13.97
14.01
14.05
14.07
14.09
14.10
14.11
14.10
14.09
2.90
3.81
5.52
9.70
0.49
0.93
1.35
1.75
2.14
2.52
2.90
3.27
3.63
3.98
4.33
4.68
5.02
5.35
5.69
6.01
6.33
6.65
6.96
7.27
7.57
7.87
8.17
8.46
8.74
9.02
9.29
9.56
9.83
10.09
10.34
10.59
10.83
11.07
11.31
11.53
11.75
11.97
12.18
12.38
12.58
12.77
12.95
13.13
13.30
13.47
13.63
13.78
13.92
14.06
14.19
14.31
14.42
14.53
14.63
14.72
14.81
14.88
14.95
15.01
15.06
15.10
15.14
15.16
15.18
15.19
15.18
15.17
15.15
15.12
3.18
4.18
6.07
10.66
0.54
1.02
1.48
1.92
2.35
2.77
3.18
3.58
3.98
4.37
4.76
5.14
5.52
5.89
6.25
6.61
6.96
7.31
7.66
8.00
8.33
8.66
8.98
9.30
9.61
9.92
10.22
10.51
10.80
11.09
11.36
11.63
11.90
12.16
12.41
12.66
12.89
13.13
13.35
13.57
13.78
13.98
14.18
14.37
14.55
14.72
14.89
15.05
15.19
15.33
15.47
15.59
15.70
15.81
15.91
15.99
16.07
16.14
16.20
16.25
16.29
16.32
16.34
16.35
16.34
16.33
16.31
16.28
16.23
16.18
3.78
4.97
7.23
12.67
0.64
1.20
1.75
2.27
2.78
3.29
3.78
4.26
4.74
5.21
5.67
6.12
6.57
7.01
7.45
7.88
8.30
8.72
9.12
9.53
9.92
10.31
10.69
11.07
11.44
11.80
12.15
12.50
12.83
13.16
13.49
13.80
14.11
14.40
14.69
14.97
15.24
15.50
15.75
15.99
16.23
16.45
16.66
16.86
17.05
17.23
17.40
17.56
17.71
17.84
17.97
18.08
18.18
18.27
18.34
18.40
18.45
18.49
18.51
18.52
18.52
18.50
18.47
18.42
18.36
4.57
6.02
8.76
15.23
0.76
1.45
2.11
2.74
3.36
3.97
4.57
5.16
5.74
6.30
6.86
7.42
7.96
8.49
9.02
9.54
10.05
10.55
11.04
11.52
11.99
12.46
12.91
13.36
13.79
14.22
14.63
15.03
15.42
15.81
16.18
16.53
16.88
17.21
17.53
17.84
18.14
18.42
18.69
18.94
19.18
19.41
19.62
19.82
20.00
20.16
20.31
20.44
20.56
20.66
20.74
20.81
20.85
20.88
20.89
5.35
7.06
10.26
17.65
0.89
1.69
2.46
3.21
3.94
4.65
5.35
6.04
6.72
7.39
8.04
8.69
9.32
9.95
10.56
11.16
11.75
12.33
12.90
13.46
14.00
14.53
15.05
15.55
16.04
16.52
16.99
17.43
17.87
18.29
18.69
19.08
19.44
19.80
20.13
20.45
20.75
21.03
21.29
21.54
21.76
21.96
22.15
22.31
22.45
22.56
22.66
22.73
22.78
22.81
6.13
8.08
11.73
19.92
1.02
1.93
2.82
3.67
4.51
5.33
6.13
6.92
7.70
8.46
9.21
9.94
10.67
11.38
12.07
12.75
13.42
14.07
14.71
15.33
15.94
16.53
17.10
17.65
18.19
18.71
19.21
19.69
20.15
20.59
21.01
21.41
21.78
22.14
22.46
22.77
23.05
23.31
23.54
23.74
23.92
24.07
24.19
24.28
24.35
7.05
9.29
13.45
22.43
1.17
2.22
3.24
4.22
5.19
6.13
7.05
7.96
8.85
9.73
10.58
11.42
12.25
13.05
13.84
14.61
15.36
16.09
16.81
17.50
18.17
18.81
19.44
20.04
20.62
21.17
21.69
22.19
22.66
23.11
23.52
23.91
24.26
24.58
24.87
25.13
25.36
25.55
25.70
25.82
8.04
10.58
15.27
24.85
1.33
2.53
3.69
4.82
5.91
6.99
8.04
9.07
10.09
11.08
12.05
13.00
13.92
14.83
15.71
16.56
17.40
18.20
18.98
19.73
20.45
21.15
21.81
22.44
23.04
23.60
24.13
24.62
25.08
25.49
25.87
26.21
26.50
26.75
26.96
9.17
12.05
17.30
27.23
1.51
2.89
4.21
5.49
6.75
7.97
9.17
10.34
11.49
12.61
13.70
14.77
15.80
16.81
17.79
18.73
19.64
20.52
21.35
22.16
22.92
23.64
24.32
24.96
25.55
26.09
26.58
27.03
27.42
27.77
Additional
per belt for
1,01 1,06
to
to
1,05 1,26
0.02
0.03
0.04
0.08
0.00
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.03
0.03
0.03
0.04
0.04
0.04
0.04
0.05
0.05
0.05
0.06
0.06
0.06
0.06
0.07
0.07
0.07
0.08
0.08
0.08
0.08
0.09
0.09
0.09
0.10
0.10
0.10
0.11
0.11
0.11
0.11
0.12
0.12
0.12
0.13
0.13
0.13
0.13
0.14
0.14
0.14
0.15
0.15
0.15
0.16
0.16
0.16
0.16
0.17
0.17
0.17
0.18
0.18
0.18
0.18
0.19
0.19
0.19
0.20
0.20
0.20
0.21
SUPER TX M=S
0.13
0.18
0.27
0.54
0.02
0.04
0.06
0.08
0.09
0.11
0.13
0.15
0.17
0.19
0.21
0.23
0.25
0.27
0.28
0.30
0.32
0.34
0.36
0.38
0.40
0.42
0.44
0.45
0.47
0.49
0.51
0.53
0.55
0.57
0.59
0.61
0.63
0.64
0.66
0.68
0.70
0.72
0.74
0.76
0.78
0.80
0.81
0.83
0.85
0.87
0.89
0.91
0.93
0.95
0.97
0.98
1.00
1.02
1.04
1.06
1.08
1.10
1.12
1.14
1.16
1.17
1.19
1.21
1.23
1.25
1.27
1.29
1.31
1.33
power (kW)
speed ratio i
1,27 >1,57
to
1,57
0.19
0.26
0.39
0.77
0.03
0.05
0.08
0.11
0.13
0.16
0.19
0.22
0.24
0.27
0.30
0.32
0.35
0.38
0.40
0.43
0.46
0.48
0.51
0.54
0.56
0.59
0.62
0.65
0.67
0.70
0.73
0.75
0.78
0.81
0.83
0.86
0.89
0.91
0.94
0.97
0.99
1.02
1.05
1.08
1.10
1.13
1.16
1.18
1.21
1.24
1.26
1.29
1.32
1.34
1.37
1.40
1.42
1.45
1.48
1.51
1.53
1.56
1.59
1.61
1.64
1.67
1.69
1.72
1.75
1.77
1.80
1.83
1.86
1.88
0.23
0.31
0.48
0.94
0.03
0.07
0.10
0.13
0.16
0.20
0.23
0.26
0.30
0.33
0.36
0.40
0.43
0.46
0.49
0.53
0.56
0.59
0.63
0.66
0.69
0.73
0.76
0.79
0.82
0.86
0.89
0.92
0.96
0.99
1.02
1.05
1.09
1.12
1.15
1.19
1.22
1.25
1.29
1.32
1.35
1.38
1.42
1.45
1.48
1.52
1.55
1.58
1.62
1.65
1.68
1.71
1.75
1.78
1.81
1.85
1.88
1.91
1.94
1.98
2.01
2.04
2.08
2.11
2.14
2.18
2.21
2.24
2.27
2.31
v (m/s)
Dynamically balanced (for details see DIN 2211)
Pulleys
93
Power Ratings
optibelt SUPER TX M=S Section XPB, 5VX
Nominal Power Rating PN (kW) for = 180 and Ld = 3550 mm
Statically balanced
v (m/s)
Pulleys
Table 38
nk
(min-1)
112
118
125
132
140
150
160
180
200
224
250
280
315
700
950
1450
2850
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
5100
5200
5300
5400
5500
5600
5700
5800
5900
6000
2.87
3.79
5.52
9.74
0.48
0.91
1.32
1.72
2.11
2.49
2.87
3.24
3.61
3.97
4.32
4.67
5.02
5.36
5.69
6.02
6.35
6.67
6.99
7.30
7.61
7.91
8.20
8.50
8.78
9.06
9.34
9.61
9.87
10.13
10.38
10.62
10.86
11.09
11.32
11.54
11.75
11.95
12.15
12.34
12.52
12.70
12.87
13.03
13.18
13.32
13.46
13.58
13.70
13.81
13.91
14.00
14.08
14.15
14.22
14.27
14.31
14.34
14.37
14.38
3.26
4.31
6.30
11.15
0.54
1.02
1.49
1.95
2.39
2.83
3.26
3.68
4.10
4.51
4.92
5.32
5.72
6.11
6.49
6.87
7.25
7.62
7.98
8.34
8.69
9.04
9.38
9.72
10.05
10.37
10.69
11.00
11.30
11.60
11.89
12.17
12.44
12.71
12.97
13.22
13.47
13.70
13.93
14.15
14.36
14.56
14.75
14.94
15.11
15.28
15.43
15.58
15.71
15.84
15.95
16.06
16.15
16.23
16.30
16.36
16.41
16.45
16.47
16.49
3.71
4.91
7.20
12.78
0.61
1.16
1.69
2.21
2.72
3.22
3.71
4.20
4.68
5.15
5.62
6.08
6.53
6.98
7.42
7.86
8.29
8.72
9.14
9.55
9.95
10.35
10.75
11.13
11.51
11.88
12.25
12.60
12.95
13.29
13.62
13.95
14.26
14.57
14.87
15.15
15.43
15.70
15.96
16.21
16.45
16.68
16.90
17.11
17.31
17.49
17.67
17.83
17.98
18.12
18.25
18.36
18.46
18.55
18.63
18.69
18.74
18.77
18.80
18.80
4.16
5.52
8.10
14.38
0.67
1.29
1.89
2.47
3.05
3.61
4.16
4.71
5.25
5.78
6.31
6.83
7.34
7.85
8.35
8.84
9.33
9.81
10.28
10.75
11.21
11.66
12.10
12.53
12.96
13.38
13.79
14.19
14.58
14.96
15.33
15.70
16.05
16.39
16.73
17.05
17.36
17.66
17.95
18.23
18.49
18.75
18.99
19.22
19.43
19.63
19.82
20.00
20.16
20.31
20.44
20.56
20.66
20.75
20.83
20.88
20.93
20.95
20.96
20.95
4.68
6.21
9.12
16.20
0.75
1.45
2.12
2.78
3.42
4.05
4.68
5.30
5.91
6.51
7.10
7.69
8.27
8.84
9.40
9.96
10.51
11.05
11.58
12.11
12.62
13.13
13.63
14.12
14.60
15.07
15.53
15.98
16.41
16.84
17.26
17.66
18.06
18.44
18.81
19.17
19.51
19.84
20.16
20.46
20.75
21.03
21.29
21.54
21.77
21.98
22.18
22.37
22.53
22.68
22.82
22.93
23.03
23.11
23.17
23.22
23.24
23.25
23.24
23.20
5.32
7.07
10.39
18.42
0.85
1.64
2.40
3.15
3.89
4.61
5.32
6.03
6.72
7.41
8.09
8.76
9.42
10.07
10.71
11.35
11.97
12.59
13.20
13.79
14.38
14.96
15.52
16.08
16.62
17.15
17.67
18.17
18.67
19.15
19.61
20.07
20.51
20.93
21.34
21.74
22.12
22.48
22.82
23.16
23.47
23.76
24.04
24.30
24.54
24.76
24.97
25.15
25.31
25.46
25.58
25.68
25.76
25.82
25.85
5.96
7.92
11.65
20.60
0.95
1.83
2.69
3.53
4.35
5.16
5.96
6.75
7.53
8.30
9.07
9.82
10.56
11.29
12.01
12.73
13.43
14.12
14.79
15.46
16.12
16.76
17.39
18.00
18.61
19.19
19.77
20.33
20.87
21.40
21.91
22.41
22.89
23.35
23.79
24.22
24.62
25.01
25.38
25.73
26.05
26.36
26.64
26.91
27.15
27.36
27.56
27.73
27.88
28.00
28.10
28.17
28.21
28.23
28.22
7.24
9.62
14.15
24.81
1.14
2.21
3.25
4.27
5.27
6.26
7.24
8.20
9.15
10.09
11.01
11.93
12.83
13.71
14.59
15.45
16.29
17.12
17.94
18.74
19.52
20.29
21.03
21.76
22.48
23.17
23.84
24.49
25.12
25.73
26.32
26.88
27.42
27.93
28.42
28.89
29.32
29.74
30.12
30.47
30.80
31.10
31.37
31.60
31.81
31.98
32.12
32.22
32.30
32.33
8.50
11.31
16.61
28.80
1.34
2.59
3.82
5.01
6.19
7.36
8.50
9.64
10.75
11.85
12.94
14.01
15.06
16.10
17.12
18.12
19.11
20.07
21.01
21.93
22.83
23.71
24.56
25.39
26.20
26.97
27.73
28.45
29.14
29.81
30.45
31.05
31.62
32.16
32.67
33.14
33.57
33.97
34.33
34.65
34.94
35.18
35.38
35.54
35.66
10.01
13.31
19.52
33.28
1.57
3.05
4.49
5.90
7.29
8.66
10.01
11.35
12.66
13.95
15.23
16.48
17.71
18.92
20.11
21.27
22.41
23.52
24.60
25.65
26.67
27.67
28.63
29.55
30.45
31.30
32.12
32.90
33.64
34.34
35.00
35.62
36.19
36.72
37.19
37.62
38.00
38.33
38.61
38.84
11.64
15.46
22.60
37.71
1.82
3.54
5.22
6.86
8.48
10.07
11.64
13.19
14.71
16.20
17.67
19.12
20.53
21.92
23.27
24.59
25.88
27.13
28.35
29.52
30.66
31.75
32.80
33.80
34.76
35.67
36.52
37.32
38.07
38.77
39.40
39.98
40.49
40.94
41.33
13.50
17.91
26.06
42.21
2.11
4.11
6.05
7.96
9.84
11.68
13.50
15.29
17.04
18.76
20.45
22.10
23.72
25.29
26.83
28.31
29.75
31.15
32.49
33.77
35.00
36.18
37.29
38.34
39.32
40.24
41.08
41.85
42.55
43.17
15.65
20.72
29.97
46.56
2.45
4.76
7.02
9.23
11.41
13.55
15.65
17.71
19.73
21.70
23.63
25.51
27.34
29.11
30.82
32.48
34.06
35.58
37.03
38.40
39.70
40.91
42.04
43.08
44.02
44.87
45.62
46.27
46.81
355
400
18.07 20.76
23.87 27.33
34.25 38.79
2.83
5.51
8.12
10.68
13.19
15.66
18.07
20.43
22.74
24.99
27.17
29.29
31.33
33.30
35.18
36.98
38.69
40.30
41.82
43.22
44.52
45.69
46.75
47.69
48.49
3.26
6.35
9.35
12.30
15.18
18.00
20.76
23.45
26.06
28.59
31.03
33.38
35.63
37.77
39.79
41.70
43.47
45.12
46.61
47.96
49.16
50.18
Additional
per belt for
1,01 1,06
to
to
1,05 1,26
0.04
0.06
0.09
0.18
0.01
0.01
0.02
0.03
0.03
0.04
0.04
0.05
0.06
0.06
0.07
0.08
0.08
0.09
0.09
0.10
0.11
0.11
0.12
0.13
0.13
0.14
0.15
0.15
0.16
0.16
0.17
0.18
0.18
0.19
0.20
0.20
0.21
0.22
0.22
0.23
0.23
0.24
0.25
0.25
0.26
0.27
0.27
0.28
0.28
0.29
0.30
0.30
0.31
0.32
0.32
0.33
0.34
0.34
0.35
0.35
0.36
0.37
0.37
0.38
SUPER TX M=S
0.29
0.39
0.59
1.17
0.04
0.08
0.12
0.16
0.20
0.25
0.29
0.33
0.37
0.41
0.45
0.49
0.53
0.57
0.61
0.65
0.70
0.74
0.78
0.82
0.86
0.90
0.94
0.98
1.02
1.06
1.10
1.15
1.19
1.23
1.27
1.31
1.35
1.39
1.43
1.47
1.51
1.55
1.60
1.64
1.68
1.72
1.76
1.80
1.84
1.88
1.92
1.96
2.00
2.05
2.09
2.13
2.17
2.21
2.25
2.29
2.33
2.37
2.41
2.45
power (kW)
speed ratio i
1,27 >1,57
to
1,57
0.41
0.55
0.84
1.65
0.06
0.12
0.17
0.23
0.29
0.35
0.41
0.46
0.52
0.58
0.64
0.70
0.75
0.81
0.87
0.93
0.99
1.05
1.10
1.16
1.22
1.28
1.34
1.39
1.45
1.51
1.57
1.63
1.68
1.74
1.80
1.86
1.92
1.97
2.03
2.09
2.15
2.21
2.26
2.32
2.38
2.44
2.50
2.56
2.61
2.67
2.73
2.79
2.85
2.90
2.96
3.02
3.08
3.14
3.19
3.25
3.31
3.37
3.43
3.48
0.50
0.68
1.03
2.03
0.07
0.14
0.21
0.28
0.36
0.43
0.50
0.57
0.64
0.71
0.78
0.85
0.93
1.00
1.07
1.14
1.21
1.28
1.35
1.42
1.50
1.57
1.64
1.71
1.78
1.85
1.92
1.99
2.06
2.14
2.21
2.28
2.35
2.42
2.49
2.56
2.63
2.71
2.78
2.85
2.92
2.99
3.06
3.13
3.20
3.28
3.35
3.42
3.49
3.56
3.63
3.70
3.77
3.84
3.92
3.99
4.06
4.13
4.20
4.27
94
Pulleys
Note: Pulley diameters shown are outside diameters for sections 5VX.
Power Ratings
optibelt SUPER TX M=S Section XPC
Nominal Power Rating PN (kW) for = 180 and Ld = 5600 mm
Statically balanced
v (m/s)
Pulleys
Table 39
nk
(min-1)
180
200
224
250
280
315
335
355
400
450
500
560
630
710
700
950
1450
2850
50
100
150
200
250
300
350
400
450
500
550
600
650
700
750
800
850
900
950
1000
1050
1100
1150
1200
1250
1300
1350
1400
1450
1500
1550
1600
1650
1700
1750
1800
1850
1900
1950
2000
2050
2100
2150
2200
2250
2300
2350
2400
2450
2500
2550
2600
2650
2700
2750
2800
2850
2900
2950
3000
3050
3100
3150
3200
3250
3300
3350
3400
3450
3500
9.39
12.53
18.50
31.92
0.73
1.43
2.12
2.81
3.48
4.15
4.82
5.49
6.14
6.80
7.45
8.10
8.74
9.39
10.02
10.66
11.29
11.91
12.53
13.15
13.76
14.37
14.98
15.58
16.17
16.76
17.35
17.93
18.50
19.07
19.64
20.19
20.75
21.29
21.83
22.37
22.90
23.42
23.93
24.44
24.95
25.44
25.93
26.41
26.88
27.35
27.80
28.25
28.69
29.13
29.55
29.97
30.38
30.77
31.16
31.55
31.92
32.28
32.63
32.97
33.31
33.63
33.94
34.24
34.54
34.82
35.09
35.35
35.59
35.83
11.26
15.04
22.16
37.66
0.87
1.71
2.54
3.36
4.17
4.98
5.78
6.58
7.37
8.16
8.94
9.72
10.49
11.26
12.03
12.79
13.54
14.29
15.04
15.77
16.51
17.24
17.96
18.67
19.38
20.09
20.78
21.47
22.16
22.83
23.50
24.16
24.81
25.46
26.10
26.73
27.35
27.96
28.56
29.16
29.74
30.32
30.88
31.44
31.98
32.52
33.04
33.55
34.06
34.55
35.03
35.50
35.95
36.40
36.83
37.25
37.66
38.05
38.43
38.80
39.16
39.50
39.83
40.14
40.44
40.72
40.99
41.25
41.49
41.71
13.50
18.01
26.46
43.99
1.04
2.05
3.04
4.03
5.00
5.97
6.93
7.89
8.84
9.78
10.72
11.65
12.58
13.50
14.42
15.33
16.23
17.13
18.01
18.90
19.77
20.64
21.49
22.34
23.19
24.02
24.84
25.66
26.46
27.26
28.04
28.82
29.58
30.34
31.08
31.81
32.53
33.24
33.93
34.61
35.28
35.94
36.58
37.21
37.82
38.42
39.01
39.58
40.14
40.68
41.20
41.71
42.20
42.67
43.13
43.57
43.99
44.40
44.79
45.15
45.50
45.83
46.14
46.43
46.71
46.96
47.19
47.40
47.58
47.75
15.91
21.21
31.02
50.10
1.23
2.41
3.59
4.74
5.90
7.04
8.17
9.30
10.42
11.53
12.64
13.74
14.83
15.91
16.99
18.06
19.12
20.17
21.21
22.24
23.26
24.27
25.27
26.26
27.23
28.20
29.15
30.09
31.02
31.93
32.84
33.72
34.59
35.45
36.29
37.12
37.93
38.72
39.50
40.26
41.00
41.72
42.42
43.11
43.77
44.42
45.05
45.65
46.24
46.80
47.34
47.86
48.35
48.83
49.28
49.70
50.10
50.48
50.83
51.15
51.45
51.73
51.97
52.19
52.38
18.68
24.84
36.13
56.06
1.44
2.83
4.21
5.57
6.92
8.27
9.60
10.92
12.24
13.55
14.84
16.13
17.41
18.68
19.93
21.18
22.41
23.63
24.84
26.04
27.22
28.39
29.54
30.68
31.81
32.91
34.00
35.07
36.13
37.16
38.18
39.18
40.16
41.11
42.05
42.96
43.85
44.72
45.56
46.38
47.18
47.95
48.69
49.41
50.10
50.76
51.40
52.00
52.58
53.13
53.64
54.13
54.58
55.00
55.39
55.74
56.06
56.35
56.60
56.81
21.87
29.02
41.86
61.37
1.69
3.32
4.94
6.53
8.12
9.70
11.26
12.81
14.35
15.88
17.40
18.90
20.39
21.87
23.33
24.78
26.21
27.62
29.02
30.40
31.76
33.10
34.42
35.71
36.99
38.24
39.47
40.68
41.86
43.02
44.14
45.24
46.32
47.36
48.37
49.35
50.30
51.22
52.10
52.95
53.77
54.55
55.29
56.00
56.66
57.29
57.88
58.42
58.93
59.39
59.81
60.18
60.51
60.80
61.04
23.67
31.37
45.02
25.47
33.69
48.08
29.46
38.80
54.61
33.82
44.30
61.20
38.08
49.57
67.03
43.06
55.56
72.90
48.67
62.06
78.01
54.78
68.76
1.83
3.60
5.35
7.08
8.80
10.51
12.20
13.88
15.55
17.21
18.85
20.47
22.08
23.67
25.25
26.81
28.35
29.87
31.37
32.84
34.30
35.73
37.14
38.52
39.88
41.20
42.50
43.78
45.02
46.23
47.41
48.55
49.66
50.74
51.78
52.78
53.75
54.67
55.56
56.40
57.21
57.97
58.68
59.35
59.98
60.56
61.09
61.57
62.00
62.38
1.97
3.88
5.76
7.63
9.48
11.32
13.15
14.95
16.75
18.53
20.29
22.04
23.76
25.47
27.16
28.82
30.47
32.09
33.69
35.26
36.81
38.32
39.81
41.27
42.70
44.10
45.46
46.79
48.08
49.34
50.55
51.73
52.87
53.97
55.02
56.03
57.00
57.92
58.79
59.61
60.39
61.11
61.78
62.39
62.96
2.28
4.50
6.69
8.86
11.01
13.14
15.26
17.35
19.43
21.48
23.51
25.52
27.51
29.46
31.39
33.29
35.16
37.00
38.80
40.57
42.30
43.99
45.64
47.25
48.82
50.34
51.81
53.23
54.61
55.93
57.19
58.40
59.56
60.65
61.69
62.66
63.57
64.41
65.18
65.89
66.52
67.08
67.57
67.98
68.31
2.64
5.20
7.72
10.22
12.70
15.16
17.59
20.00
22.38
24.73
27.05
29.34
31.60
33.82
36.00
38.14
40.24
42.29
44.30
46.25
48.15
50.00
51.79
53.52
55.19
56.80
58.33
59.80
61.20
62.52
63.77
64.94
66.03
67.03
67.95
68.78
69.52
70.17
70.72
71.17
2.99
5.89
8.75
11.58
14.39
17.16
19.91
22.62
25.30
27.94
30.55
33.11
35.62
38.08
40.50
42.85
45.15
47.39
49.57
51.67
53.71
55.67
57.55
59.35
61.07
62.70
64.24
65.68
67.03
68.28
69.42
70.45
71.38
72.19
72.88
3.40
6.71
9.98
13.21
16.40
19.56
22.67
25.74
28.77
31.75
34.67
37.53
40.33
43.06
45.73
48.31
50.82
53.23
55.56
57.80
59.93
61.97
63.89
65.70
67.39
68.97
70.41
71.72
72.90
73.93
3.89
7.68
11.41
15.09
18.73
22.32
25.86
29.34
32.76
36.10
39.37
42.56
45.66
48.67
51.58
54.38
57.06
59.63
62.06
64.37
66.53
68.55
70.42
72.12
73.66
75.02
76.21
77.21
78.01
4.45
8.77
13.03
17.24
21.38
25.46
29.47
33.39
37.23
40.97
44.60
48.12
51.52
54.78
57.90
60.86
63.67
66.31
68.76
71.03
73.09
74.95
76.59
78.00
79.17
Additional
per belt for
1,01 1,06
to
to
1,05 1,26
0.08
0.10
0.16
0.31
0.01
0.01
0.02
0.02
0.03
0.03
0.04
0.04
0.05
0.05
0.06
0.07
0.07
0.08
0.08
0.09
0.09
0.10
0.10
0.11
0.11
0.12
0.12
0.13
0.14
0.14
0.15
0.15
0.16
0.16
0.17
0.17
0.18
0.18
0.19
0.20
0.20
0.21
0.21
0.22
0.22
0.23
0.23
0.24
0.24
0.25
0.26
0.26
0.27
0.27
0.28
0.28
0.29
0.29
0.30
0.30
0.31
0.31
0.32
0.33
0.33
0.34
0.34
0.35
0.35
0.36
0.36
0.37
0.37
0.38
SUPER TX M=S
0.49
0.67
1.02
2.00
0.04
0.07
0.11
0.14
0.18
0.21
0.25
0.28
0.32
0.35
0.39
0.42
0.46
0.49
0.53
0.56
0.60
0.63
0.67
0.70
0.74
0.77
0.81
0.84
0.88
0.91
0.95
0.98
1.02
1.05
1.09
1.12
1.16
1.19
1.23
1.26
1.30
1.33
1.37
1.40
1.44
1.47
1.51
1.54
1.58
1.61
1.65
1.68
1.72
1.75
1.79
1.82
1.86
1.89
1.93
1.96
2.00
2.04
2.07
2.11
2.14
2.18
2.21
2.25
2.28
2.32
2.35
2.39
2.42
2.46
power (kW)
speed ratio i
1,27 >1,57
to
1,57
0.70
0.95
1.44
2.84
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
0.50
0.55
0.60
0.65
0.70
0.75
0.80
0.85
0.90
0.95
1.00
1.05
1.10
1.15
1.20
1.25
1.29
1.34
1.39
1.44
1.49
1.54
1.59
1.64
1.69
1.74
1.79
1.84
1.89
1.94
1.99
2.04
2.09
2.14
2.19
2.24
2.29
2.34
2.39
2.44
2.49
2.54
2.59
2.64
2.69
2.74
2.79
2.84
2.89
2.94
2.99
3.04
3.09
3.14
3.19
3.24
3.29
3.34
3.39
3.44
3.49
0.85
1.16
1.77
3.48
0.06
0.12
0.18
0.24
0.31
0.37
0.43
0.49
0.55
0.61
0.67
0.73
0.79
0.85
0.92
0.98
1.04
1.10
1.16
1.22
1.28
1.34
1.40
1.47
1.53
1.59
1.65
1.71
1.77
1.83
1.89
1.95
2.02
2.08
2.14
2.20
2.26
2.32
2.38
2.44
2.50
2.56
2.63
2.69
2.75
2.81
2.87
2.93
2.99
3.05
3.11
3.18
3.24
3.30
3.36
3.42
3.48
3.54
3.60
3.66
3.72
3.79
3.85
3.91
3.97
4.03
4.09
4.15
4.21
4.27
v (m/s)
Dynamically balanced (for details see DIN 2211)
Pulleys
95
Power Ratings
optibelt SUPER TX M=S Section ZX/X10
Nominal Power Rating PN (kW) for = 180 and Ld = 822 mm
Statically balanced
v (m/s)
Pulleys
Table 40
nk
(min-1)
40
45
50
56
63
71
80
700
950
1450
2850
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
5100
5200
5300
5400
5500
5600
5800
6000
6200
6400
6600
6800
7000
7200
7400
7600
7800
8000
8200
8400
0.22
0.27
0.36
0.54
0.05
0.09
0.12
0.15
0.17
0.20
0.22
0.24
0.26
0.28
0.30
0.32
0.34
0.36
0.37
0.39
0.40
0.42
0.43
0.44
0.46
0.47
0.48
0.49
0.50
0.51
0.52
0.53
0.54
0.55
0.56
0.57
0.58
0.59
0.60
0.60
0.61
0.62
0.62
0.63
0.64
0.64
0.65
0.65
0.66
0.66
0.67
0.67
0.68
0.68
0.68
0.69
0.69
0.69
0.69
0.70
0.70
0.70
0.71
0.71
0.71
0.71
0.71
0.71
0.70
0.70
0.70
0.69
0.68
0.68
0.27
0.34
0.45
0.69
0.06
0.10
0.14
0.18
0.21
0.24
0.27
0.30
0.32
0.35
0.37
0.40
0.42
0.44
0.46
0.48
0.50
0.52
0.54
0.56
0.57
0.59
0.61
0.62
0.64
0.65
0.67
0.68
0.70
0.71
0.72
0.74
0.75
0.76
0.77
0.78
0.79
0.80
0.81
0.82
0.83
0.84
0.85
0.86
0.87
0.87
0.88
0.89
0.90
0.90
0.91
0.92
0.92
0.93
0.93
0.94
0.95
0.96
0.96
0.97
0.98
0.98
0.98
0.98
0.99
0.99
0.99
0.98
0.98
0.98
0.32
0.40
0.54
0.84
0.07
0.12
0.16
0.21
0.25
0.28
0.32
0.35
0.38
0.41
0.44
0.47
0.50
0.52
0.55
0.58
0.60
0.62
0.65
0.67
0.69
0.71
0.73
0.75
0.77
0.79
0.81
0.83
0.84
0.86
0.88
0.89
0.91
0.93
0.94
0.95
0.97
0.98
1.00
1.01
1.02
1.03
1.05
1.06
1.07
1.08
1.09
1.10
1.11
1.12
1.13
1.14
1.15
1.15
1.16
1.17
1.18
1.20
1.21
1.22
1.23
1.24
1.24
1.25
1.25
1.25
1.26
1.26
1.25
1.25
0.37
0.47
0.64
1.01
0.08
0.14
0.19
0.24
0.29
0.33
0.37
0.41
0.45
0.49
0.52
0.56
0.59
0.62
0.65
0.69
0.71
0.74
0.77
0.80
0.83
0.85
0.88
0.90
0.93
0.95
0.97
0.99
1.02
1.04
1.06
1.08
1.10
1.12
1.14
1.16
1.17
1.19
1.21
1.23
1.24
1.26
1.27
1.29
1.30
1.32
1.33
1.34
1.36
1.37
1.38
1.39
1.40
1.41
1.42
1.43
1.45
1.47
1.49
1.50
1.51
1.52
1.53
1.54
1.55
1.55
1.55
1.56
1.56
1.55
0.44
0.55
0.75
1.20
0.09
0.16
0.22
0.28
0.34
0.39
0.44
0.48
0.53
0.57
0.62
0.66
0.70
0.74
0.77
0.81
0.85
0.88
0.91
0.95
0.98
1.01
1.04
1.07
1.10
1.13
1.16
1.18
1.21
1.24
1.26
1.29
1.31
1.34
1.36
1.38
1.40
1.43
1.45
1.47
1.49
1.51
1.53
1.54
1.56
1.58
1.60
1.61
1.63
1.64
1.66
1.67
1.69
1.70
1.71
1.72
1.75
1.77
1.79
1.81
1.82
1.83
1.84
1.85
1.86
1.86
1.87
1.87
1.87
1.86
0.51
0.64
0.88
1.41
0.10
0.19
0.26
0.33
0.39
0.45
0.51
0.56
0.62
0.67
0.72
0.77
0.81
0.86
0.90
0.95
0.99
1.03
1.07
1.11
1.15
1.19
1.22
1.26
1.29
1.33
1.36
1.39
1.43
1.46
1.49
1.52
1.55
1.57
1.60
1.63
1.66
1.68
1.71
1.73
1.75
1.78
1.80
1.82
1.84
1.86
1.88
1.90
1.92
1.94
1.96
1.97
1.99
2.00
2.02
2.03
2.06
2.08
2.10
2.12
2.14
2.15
2.16
2.17
2.17
2.18
2.18
2.17
2.17
2.16
0.59
0.74
1.02
1.64
0.12
0.21
0.30
0.38
0.45
0.52
0.59
0.65
0.71
0.77
0.83
0.89
0.94
1.00
1.05
1.10
1.15
1.20
1.24
1.29
1.34
1.38
1.42
1.46
1.50
1.54
1.58
1.62
1.66
1.70
1.73
1.77
1.80
1.83
1.86
1.89
1.93
1.95
1.98
2.01
2.04
2.07
2.09
2.12
2.14
2.16
2.18
2.21
2.23
2.25
2.27
2.28
2.30
2.32
2.33
2.35
2.38
2.40
2.42
2.44
2.45
2.46
2.47
2.47
2.47
2.47
2.46
2.45
2.43
2.41
90
100
112
0.67
0.76
0.85
0.85
0.96
1.09
1.18
1.32
1.50
1.88
2.12
2.39
0.14
0.15
0.17
0.24
0.27
0.31
0.34
0.38
0.43
0.43
0.48
0.54
0.51
0.58
0.65
0.60
0.67
0.76
0.67
0.76
0.85
0.75
0.84
0.95
0.82
0.92
1.04
0.89
1.00
1.13
0.95
1.07
1.21
1.02
1.15
1.30
1.08
1.22
1.38
1.14
1.29
1.46
1.20
1.36
1.53
1.26
1.42
1.61
1.32
1.49
1.68
1.38
1.55
1.75
1.43
1.61
1.82
1.48
1.67
1.89
1.53
1.73
1.95
1.59
1.78
2.01
1.63
1.84
2.08
1.68
1.89
2.14
1.73
1.95
2.19
1.78
2.00
2.25
1.82
2.05
2.31
1.86
2.09
2.36
1.91
2.14
2.41
1.95
2.19
2.46
1.99
2.23
2.51
2.03
2.28
2.56
2.07
2.32
2.60
2.10
2.36
2.65
2.14
2.40
2.69
2.17
2.44
2.73
2.21
2.47
2.77
2.24
2.51
2.81
2.27
2.54
2.84
2.30
2.58
2.88
2.33
2.61
2.91
2.36
2.64
2.94
2.39
2.67
2.97
2.42
2.70
3.00
2.44
2.72
3.02
2.47
2.75
3.05
2.49
2.77
3.07
2.52
2.80
3.09
2.54
2.82
3.11
2.56
2.84
3.13
2.58
2.86
3.14
2.60
2.87
3.16
2.61
2.89
3.17
2.63
2.91
3.18
2.65
2.92
3.19
2.66
2.93
3.20
2.69
2.95
3.21
2.71
2.97
3.21
2.72
2.97
3.20
2.74
2.98
3.18
2.74
2.97
3.16
2.75
2.96
3.13
2.74
2.95
3.09
2.74
2.93
3.04
2.73
2.90
2.99
2.71
Where
v
>
30
m/s,
2.69
2.66 please consult our
Applications Engineering
Department
Additional
per belt for
1,01 1,06
to
to
1,05 1,26
0.00
0.01
0.01
0.02
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.04
0.04
0.04
0.04
0.04
0.04
0.04
0.04
0.04
0.04
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.06
0.06
SUPER TX M=S
0.02
0.02
0.04
0.07
0.00
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.02
0.03
0.03
0.03
0.03
0.04
0.04
0.04
0.04
0.05
0.05
0.05
0.05
0.06
0.06
0.06
0.06
0.07
0.07
0.07
0.07
0.08
0.08
0.08
0.08
0.09
0.09
0.09
0.09
0.10
0.10
0.10
0.10
0.11
0.11
0.11
0.12
0.12
0.12
0.12
0.13
0.13
0.13
0.13
0.14
0.14
0.14
0.14
0.15
0.15
0.16
0.16
0.17
0.17
0.18
0.18
0.19
0.19
0.20
0.20
0.21
0.21
power (kW)
speed ratio i
1,27 >1,57
to
1,57
0.03
0.04
0.05
0.11
0.00
0.01
0.01
0.01
0.02
0.02
0.03
0.03
0.03
0.04
0.04
0.04
0.05
0.05
0.06
0.06
0.06
0.07
0.07
0.07
0.08
0.08
0.08
0.09
0.09
0.10
0.10
0.10
0.11
0.11
0.11
0.12
0.12
0.13
0.13
0.13
0.14
0.14
0.14
0.15
0.15
0.15
0.16
0.16
0.17
0.17
0.17
0.18
0.18
0.18
0.19
0.19
0.20
0.20
0.20
0.21
0.21
0.22
0.23
0.24
0.24
0.25
0.26
0.27
0.27
0.28
0.29
0.30
0.30
0.31
v (m/s)
Dynamically balanced (for details see DIN 2211)
96
Pulleys
0.04
0.05
0.08
0.16
0.01
0.01
0.02
0.02
0.03
0.03
0.04
0.05
0.05
0.06
0.06
0.07
0.07
0.08
0.09
0.09
0.10
0.10
0.11
0.11
0.12
0.13
0.13
0.14
0.14
0.15
0.15
0.16
0.17
0.17
0.18
0.18
0.19
0.19
0.20
0.21
0.21
0.22
0.22
0.23
0.23
0.24
0.25
0.25
0.26
0.26
0.27
0.27
0.28
0.29
0.29
0.30
0.30
0.31
0.31
0.32
0.33
0.34
0.35
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.45
0.46
0.47
0.48
Power Ratings
optibelt SUPER TX M=S Section AX/X13
Nominal Power Rating PN (kW) for = 180 and Ld = 1730 mm
Statically balanced
v (m/s)
Pulleys
Table 41
nk
(min-1)
63
71
80
90
95
100
106
112
118
125
132
140
150
160
180
700
950
1450
2850
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
5100
5200
5300
5400
5500
5600
5700
5800
5900
6000
0.67
0.82
1.05
1.39
0.16
0.27
0.37
0.46
0.54
0.61
0.67
0.74
0.79
0.85
0.90
0.94
0.99
1.03
1.07
1.10
1.14
1.17
1.20
1.23
1.25
1.28
1.30
1.32
1.34
1.35
1.37
1.38
1.39
1.40
1.41
1.42
1.43
1.43
1.43
1.44
1.44
1.43
1.43
1.43
1.42
1.42
1.41
1.40
1.39
1.37
1.36
1.34
1.33
1.31
1.29
1.27
1.25
1.22
1.20
1.17
1.14
1.11
1.08
1.05
0.86
1.06
1.39
1.96
0.19
0.34
0.46
0.57
0.68
0.77
0.86
0.94
1.02
1.10
1.17
1.23
1.30
1.36
1.42
1.47
1.52
1.57
1.62
1.66
1.71
1.75
1.78
1.82
1.85
1.89
1.92
1.94
1.97
2.00
2.02
2.04
2.06
2.07
2.09
2.10
2.11
2.12
2.13
2.14
2.14
2.14
2.15
2.14
2.14
2.14
2.13
2.12
2.11
2.10
2.09
2.07
2.05
2.04
2.01
1.99
1.97
1.94
1.91
1.88
1.07
1.33
1.76
2.58
0.23
0.41
0.56
0.70
0.83
0.95
1.07
1.17
1.28
1.37
1.47
1.56
1.64
1.72
1.80
1.87
1.95
2.01
2.08
2.14
2.20
2.26
2.32
2.37
2.42
2.47
2.51
2.55
2.60
2.63
2.67
2.70
2.74
2.76
2.79
2.82
2.84
2.86
2.88
2.89
2.91
2.92
2.93
2.93
2.94
2.94
2.94
2.94
2.93
2.92
2.91
2.90
2.89
2.87
2.85
2.83
2.80
2.78
2.75
2.72
1.29
1.61
2.16
3.23
0.28
0.49
0.67
0.84
1.00
1.15
1.29
1.42
1.55
1.67
1.79
1.90
2.01
2.11
2.21
2.31
2.40
2.49
2.58
2.66
2.74
2.81
2.89
2.96
3.02
3.09
3.15
3.21
3.26
3.31
3.36
3.41
3.45
3.49
3.53
3.57
3.60
3.63
3.65
3.68
3.70
3.72
3.73
3.74
3.75
3.76
3.76
3.76
3.76
3.75
3.74
3.73
3.71
3.69
3.67
3.64
3.61
3.58
3.55
3.51
1.40
1.76
2.36
3.55
0.30
0.52
0.73
0.91
1.08
1.25
1.40
1.55
1.69
1.82
1.95
2.07
2.19
2.31
2.42
2.52
2.63
2.73
2.82
2.91
3.00
3.08
3.16
3.24
3.32
3.39
3.46
3.52
3.58
3.64
3.70
3.75
3.80
3.84
3.88
3.92
3.96
3.99
4.02
4.05
4.07
4.09
4.11
4.12
4.13
4.14
4.14
4.14
4.13
4.13
4.11
4.10
4.08
4.06
4.03
4.00
3.97
3.93
3.89
3.85
1.51
1.90
2.56
3.86
0.32
0.56
0.78
0.98
1.17
1.34
1.51
1.67
1.82
1.97
2.11
2.24
2.37
2.50
2.62
2.74
2.85
2.96
3.06
3.16
3.26
3.35
3.44
3.52
3.60
3.68
3.76
3.83
3.90
3.96
4.02
4.08
4.13
4.18
4.23
4.27
4.31
4.34
4.38
4.40
4.43
4.45
4.47
4.48
4.49
4.49
4.50
4.49
4.49
4.48
4.46
4.45
4.42
4.40
4.37
4.33
4.29
4.25
4.20
4.15
1.64
2.06
2.79
4.23
0.34
0.61
0.84
1.06
1.27
1.46
1.64
1.81
1.98
2.14
2.30
2.44
2.59
2.72
2.86
2.99
3.11
3.23
3.34
3.45
3.56
3.66
3.76
3.85
3.94
4.03
4.11
4.19
4.26
4.33
4.40
4.46
4.52
4.57
4.62
4.67
4.71
4.75
4.78
4.81
4.84
4.86
4.88
4.89
4.90
4.90
4.90
4.89
4.88
4.87
4.85
4.82
4.79
4.76
4.72
4.68
4.63
4.58
4.52
4.45
1.77
2.23
3.02
4.58
0.37
0.65
0.91
1.14
1.36
1.57
1.77
1.96
2.14
2.31
2.48
2.64
2.80
2.95
3.09
3.23
3.37
3.50
3.62
3.74
3.86
3.97
4.07
4.18
4.27
4.37
4.45
4.54
4.62
4.69
4.77
4.83
4.89
4.95
5.00
5.05
5.10
5.14
5.17
5.20
5.22
5.24
5.26
5.27
5.27
5.27
5.27
5.26
5.24
5.22
5.19
5.16
5.12
5.08
5.03
1.90
2.39
3.25
4.92
0.39
0.70
0.97
1.22
1.46
1.68
1.90
2.10
2.30
2.48
2.66
2.84
3.01
3.17
3.32
3.47
3.62
3.76
3.89
4.02
4.15
4.27
4.38
4.49
4.59
4.69
4.79
4.88
4.96
5.04
5.12
5.19
5.25
5.31
5.37
5.42
5.46
5.50
5.53
5.56
5.59
5.60
5.61
5.62
5.62
5.61
5.60
5.59
5.56
5.53
5.50
5.46
5.41
5.35
5.29
2.04
2.58
3.51
5.31
0.42
0.75
1.04
1.32
1.57
1.81
2.04
2.26
2.48
2.68
2.88
3.06
3.25
3.42
3.59
3.75
3.91
4.06
4.21
4.35
4.48
4.61
4.73
4.85
4.96
5.07
5.17
5.26
5.35
5.44
5.52
5.59
5.66
5.72
5.77
5.82
5.87
5.90
5.93
5.96
5.98
5.99
6.00
6.00
5.99
5.97
5.95
5.92
5.89
5.85
2.19
2.76
3.76
5.68
0.45
0.80
1.11
1.41
1.68
1.94
2.19
2.43
2.65
2.87
3.08
3.29
3.48
3.67
3.85
4.03
4.19
4.36
4.51
4.66
4.80
4.94
5.07
5.20
5.32
5.43
5.53
5.63
5.73
5.82
5.90
5.97
6.04
6.10
6.15
6.20
6.24
6.28
6.30
6.32
6.34
6.34
6.34
6.33
6.31
6.29
6.25
6.21
6.16
6.11
2.35
2.97
4.05
6.09
0.48
0.86
1.20
1.51
1.81
2.09
2.35
2.61
2.86
3.09
3.32
3.54
3.75
3.95
4.14
4.33
4.51
4.69
4.85
5.01
5.17
5.31
5.45
5.58
5.71
5.83
5.94
6.04
6.14
6.23
6.31
6.38
6.45
6.51
6.56
6.61
6.64
6.67
6.69
6.70
6.70
6.70
6.68
6.66
6.63
2.56
3.23
4.40
6.57
0.52
0.93
1.30
1.64
1.96
2.27
2.56
2.84
3.10
3.36
3.61
3.84
4.07
4.29
4.50
4.71
4.90
5.09
5.27
5.44
5.60
5.76
5.91
6.05
6.18
6.30
6.42
6.52
6.62
6.71
6.79
6.86
6.93
6.98
7.03
7.06
7.09
7.11
7.11
7.11
7.10
7.07
7.04
7.00
6.94
2.76
3.49
4.74
7.03
0.56
1.00
1.40
1.77
2.11
2.44
2.76
3.06
3.35
3.62
3.89
4.15
4.39
4.63
4.86
5.07
5.28
5.48
5.67
5.86
6.03
6.19
6.35
6.49
6.63
6.75
6.87
6.98
7.07
7.16
7.24
7.30
7.36
7.41
7.44
7.47
7.48
7.48
7.47
7.45
3.15
3.98
5.41
7.84
0.63
1.14
1.59
2.02
2.41
2.79
3.15
3.50
3.82
4.14
4.44
4.73
5.01
5.28
5.53
5.78
6.01
6.23
6.44
6.64
6.83
7.00
7.16
7.31
7.45
7.58
7.69
7.79
7.88
7.95
8.01
8.06
8.09
8.11
8.11
Additional
per belt for
1,01 1,06
to
to
1,05 1,26
0.02
0.03
0.04
0.09
0.00
0.01
0.01
0.01
0.02
0.02
0.02
0.02
0.03
0.03
0.03
0.04
0.04
0.04
0.05
0.05
0.05
0.05
0.06
0.06
0.06
0.07
0.07
0.07
0.08
0.08
0.08
0.09
0.09
0.09
0.09
0.10
0.10
0.10
0.11
0.11
0.11
0.12
0.12
0.12
0.12
0.13
0.13
0.13
0.14
0.14
0.14
0.15
0.15
0.15
0.16
0.16
0.16
0.16
0.17
0.17
0.17
0.18
0.18
0.18
SUPER TX M=S
0.08
0.11
0.17
0.33
0.01
0.02
0.03
0.05
0.06
0.07
0.08
0.09
0.10
0.11
0.13
0.14
0.15
0.16
0.17
0.18
0.20
0.21
0.22
0.23
0.24
0.25
0.26
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.44
0.45
0.46
0.47
0.48
0.49
0.51
0.52
0.53
0.54
0.55
0.56
0.57
0.59
0.60
0.61
0.62
0.63
0.64
0.65
0.67
0.68
0.69
power (kW)
speed ratio i
1,27 >1,57
to
1,57
0.12
0.16
0.24
0.47
0.02
0.03
0.05
0.07
0.08
0.10
0.12
0.13
0.15
0.17
0.18
0.20
0.22
0.23
0.25
0.26
0.28
0.30
0.31
0.33
0.35
0.36
0.38
0.40
0.41
0.43
0.45
0.46
0.48
0.50
0.51
0.53
0.55
0.56
0.58
0.60
0.61
0.63
0.65
0.66
0.68
0.70
0.71
0.73
0.74
0.76
0.78
0.79
0.81
0.83
0.84
0.86
0.88
0.89
0.91
0.93
0.94
0.96
0.98
0.99
0.18
0.24
0.37
0.73
0.03
0.05
0.08
0.10
0.13
0.15
0.18
0.21
0.23
0.26
0.28
0.31
0.33
0.36
0.38
0.41
0.44
0.46
0.49
0.51
0.54
0.56
0.59
0.62
0.64
0.67
0.69
0.72
0.74
0.77
0.80
0.82
0.85
0.87
0.90
0.92
0.95
0.98
1.00
1.03
1.05
1.08
1.10
1.13
1.15
1.18
1.21
1.23
1.26
1.28
1.31
1.33
1.36
1.39
1.41
1.44
1.46
1.49
1.51
1.54
Pulleys
97
Power Ratings
optibelt SUPER TX M=S Section BX/X17
Nominal Power Rating PN (kW) for = 180 and Ld = 2280 mm
Statically balanced
v (m/s)
Pulleys
Table 42
nk
(min-1)
90
100
106
112
118
125
132
140
160
180
190
200
212
224
250
280
700
950
1450
2850
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
1.70
2.12
2.82
4.16
0.37
0.64
0.89
1.11
1.32
1.51
1.70
1.87
2.04
2.19
2.35
2.49
2.63
2.76
2.89
3.01
3.13
3.24
3.35
3.45
3.55
3.64
3.73
3.82
3.90
3.98
4.05
4.12
4.19
4.25
4.31
4.36
4.41
4.46
4.50
4.54
4.57
4.60
4.63
4.65
4.67
4.68
4.69
4.70
4.70
4.70
4.69
4.68
4.66
4.64
2.01
2.52
3.39
5.06
0.42
0.75
1.04
1.31
1.56
1.79
2.01
2.22
2.42
2.61
2.80
2.98
3.15
3.31
3.47
3.62
3.76
3.90
4.04
4.17
4.29
4.41
4.53
4.63
4.74
4.84
4.93
5.02
5.11
5.19
5.26
5.33
5.39
5.45
5.51
5.56
5.60
5.64
5.68
5.71
5.73
5.75
5.77
5.78
5.78
5.78
5.77
5.76
5.74
5.72
2.20
2.76
3.72
5.59
0.46
0.82
1.13
1.42
1.70
1.95
2.20
2.43
2.65
2.86
3.07
3.26
3.45
3.63
3.81
3.98
4.14
4.30
4.45
4.59
4.73
4.86
4.99
5.11
5.23
5.34
5.44
5.54
5.64
5.73
5.81
5.89
5.96
6.03
6.09
6.14
6.19
6.24
6.27
6.31
6.33
6.35
6.37
6.38
6.38
6.37
6.36
6.35
6.32
6.29
2.38
2.99
4.05
6.10
0.49
0.88
1.22
1.54
1.83
2.11
2.38
2.63
2.87
3.11
3.33
3.55
3.75
3.95
4.14
4.33
4.51
4.68
4.85
5.00
5.16
5.30
5.44
5.58
5.70
5.83
5.94
6.05
6.15
6.25
6.34
6.43
6.50
6.58
6.64
6.70
6.75
6.80
6.84
6.87
6.90
6.92
6.93
6.94
6.93
6.93
6.91
6.89
6.86
6.82
2.56
3.23
4.37
6.60
0.53
0.94
1.31
1.65
1.97
2.27
2.56
2.84
3.10
3.35
3.59
3.83
4.05
4.27
4.48
4.68
4.87
5.06
5.24
5.41
5.58
5.73
5.89
6.03
6.17
6.30
6.43
6.54
6.65
6.76
6.86
6.95
7.03
7.11
7.17
7.24
7.29
7.34
7.38
7.41
7.43
7.45
7.46
7.46
7.45
7.44
7.41
7.38
7.34
7.29
2.77
3.49
4.75
7.16
0.57
1.01
1.41
1.78
2.13
2.46
2.77
3.07
3.36
3.63
3.89
4.15
4.39
4.63
4.86
5.08
5.29
5.49
5.69
5.88
6.06
6.23
6.39
6.55
6.70
6.84
6.98
7.10
7.22
7.33
7.43
7.53
7.62
7.70
7.77
7.83
7.88
7.93
7.96
7.99
8.01
8.02
8.02
8.02
8.00
7.97
7.94
7.89
7.84
7.77
2.98
3.76
5.11
7.70
0.61
1.09
1.52
1.91
2.29
2.64
2.98
3.30
3.61
3.91
4.19
4.47
4.73
4.99
5.23
5.47
5.70
5.92
6.13
6.33
6.53
6.71
6.89
7.06
7.21
7.37
7.51
7.64
7.77
7.88
7.99
8.09
8.18
8.26
8.33
8.39
8.44
8.48
8.51
8.53
8.54
8.55
8.54
8.52
8.49
8.45
8.39
8.33
8.26
8.17
3.21
4.06
5.53
8.30
0.65
1.17
1.63
2.06
2.47
2.85
3.21
3.56
3.90
4.22
4.53
4.83
5.11
5.39
5.66
5.91
6.16
6.40
6.62
6.84
7.05
7.25
7.44
7.62
7.78
7.94
8.09
8.23
8.36
8.48
8.59
8.69
8.78
8.86
8.93
8.98
9.03
9.06
9.08
9.09
9.09
9.08
9.06
9.02
8.97
3.79
4.79
6.53
9.67
0.76
1.37
1.92
2.43
2.90
3.36
3.79
4.20
4.60
4.98
5.35
5.70
6.04
6.37
6.68
6.98
7.27
7.55
7.81
8.06
8.30
8.52
8.74
8.94
9.12
9.30
9.46
9.60
9.73
9.85
9.96
10.05
10.13
10.19
10.23
10.26
10.28
10.28
10.26
10.23
10.18
10.11
10.02
9.92
9.80
4.35
5.51
7.49
10.86
0.87
1.57
2.20
2.78
3.33
3.85
4.35
4.83
5.29
5.72
6.14
6.55
6.94
7.31
7.66
8.00
8.32
8.63
8.92
9.20
9.46
9.70
9.93
10.14
10.33
10.51
10.66
10.80
10.92
11.03
11.11
11.17
11.22
11.24
11.24
11.23
11.19
11.13
11.05
10.94
4.63
5.86
7.95
11.39
0.93
1.67
2.34
2.96
3.54
4.10
4.63
5.14
5.62
6.09
6.53
6.96
7.37
7.76
8.14
8.49
8.83
9.15
9.45
9.74
10.01
10.25
10.48
10.69
10.88
11.06
11.21
11.34
11.44
11.53
11.60
11.64
11.66
11.66
11.63
4.90
6.20
8.40
11.87
0.98
1.76
2.47
3.13
3.75
4.34
4.90
5.44
5.95
6.44
6.91
7.36
7.80
8.21
8.60
8.97
9.32
9.65
9.97
10.26
10.53
10.78
11.01
11.22
11.40
11.57
11.71
11.82
11.92
11.99
12.03
12.05
12.04
12.00
11.94
5.23
6.61
8.94
12.39
1.04
1.88
2.63
3.34
4.00
4.63
5.23
5.80
6.34
6.86
7.36
7.84
8.29
8.73
9.14
9.53
9.89
10.24
10.56
10.86
11.13
11.38
11.61
11.81
11.98
12.13
12.25
12.35
12.42
12.45
5.55
7.01
9.45
12.82
1.11
1.99
2.80
3.54
4.24
4.91
5.55
6.15
6.73
7.28
7.80
8.31
8.78
9.23
9.66
10.07
10.44
10.80
11.12
11.42
11.69
11.94
12.16
12.35
12.51
12.64
12.73
12.80
12.84
12.84
6.22
7.85
10.52
13.51
1.24
2.24
3.14
3.98
4.77
5.51
6.22
6.90
7.54
8.15
8.73
9.28
9.80
10.29
10.74
11.17
11.56
11.92
12.25
12.54
12.80
13.02
13.20
13.35
13.46
13.52
13.55
13.53
13.47
13.37
6.98
8.78
11.66
13.82
1.40
2.52
3.53
4.47
5.36
6.19
6.98
7.73
8.44
9.12
9.75
10.34
10.90
11.42
11.90
12.33
12.73
13.08
13.38
13.64
13.86
14.02
14.14
14.20
14.21
Additional
per belt for
1,01 1,06
to
to
1,05 1,26
0.03
0.04
0.07
0.13
0.00
0.01
0.01
0.02
0.02
0.03
0.03
0.04
0.04
0.05
0.05
0.06
0.06
0.07
0.07
0.07
0.08
0.08
0.09
0.09
0.10
0.10
0.11
0.11
0.12
0.12
0.13
0.13
0.14
0.14
0.15
0.15
0.15
0.16
0.16
0.17
0.17
0.18
0.18
0.19
0.19
0.20
0.20
0.21
0.21
0.22
0.22
0.22
0.23
0.23
SUPER TX M=S
power (kW)
speed ratio i
1,27 >1,57
to
1,57
0.12 0.18
0.17 0.24
0.26 0.37
0.50 0.72
0.02 0.03
0.04 0.05
0.05 0.08
0.07 0.10
0.09 0.13
0.11 0.15
0.12 0.18
0.14 0.20
0.16 0.23
0.18 0.25
0.19 0.28
0.21 0.31
0.23 0.33
0.25 0.36
0.26 0.38
0.28 0.41
0.30 0.43
0.32 0.46
0.33 0.48
0.35 0.51
0.37 0.53
0.39 0.56
0.41 0.58
0.42 0.61
0.44 0.64
0.46 0.66
0.48 0.69
0.49 0.71
0.51 0.74
0.53 0.76
0.55 0.79
0.56 0.81
0.58 0.84
0.60 0.86
0.62 0.89
0.63 0.92
0.65 0.94
0.67 0.97
0.69 0.99
0.71 1.02
0.72 1.04
0.74 1.07
0.76 1.09
0.78 1.12
0.79 1.14
0.81 1.17
0.83 1.19
0.85 1.22
0.86 1.25
0.88 1.27
98
Pulleys
0.28
0.37
0.57
1.12
0.04
0.08
0.12
0.16
0.20
0.24
0.28
0.32
0.35
0.39
0.43
0.47
0.51
0.55
0.59
0.63
0.67
0.71
0.75
0.79
0.83
0.87
0.91
0.95
0.99
1.02
1.06
1.10
1.14
1.18
1.22
1.26
1.30
1.34
1.38
1.42
1.46
1.50
1.54
1.58
1.62
1.65
1.69
1.73
1.77
1.81
1.85
1.89
1.93
1.97
Power Ratings
optibelt SUPER TX M=S Section CX/X22
Nominal Power Rating PN (kW) for = 180 and Ld = 3808 mm
Statically balanced
v (m/s)
Pulleys
Table 43
nk
(min-1)
140
150
160
180
200
224
250
280
315
700
950
1450
2850
50
100
150
200
250
300
350
400
450
500
550
600
650
700
750
800
850
900
950
1000
1050
1100
1150
1200
1250
1300
1350
1400
1450
1500
1550
1600
1650
1700
1750
1800
1850
1900
1950
2000
2050
2100
2150
2200
2250
2300
2350
2400
2450
2500
2550
2600
2650
2700
2750
2800
2850
2900
2950
3000
3050
3100
3150
3200
3250
3300
3350
3400
3450
3500
4.81
6.07
8.23
12.16
0.54
0.98
1.38
1.76
2.11
2.45
2.78
3.10
3.40
3.70
3.99
4.27
4.55
4.81
5.08
5.33
5.58
5.83
6.07
6.31
6.54
6.77
6.99
7.21
7.42
7.63
7.83
8.04
8.23
8.43
8.61
8.80
8.98
9.16
9.33
9.50
9.67
9.83
9.99
10.14
10.29
10.44
10.58
10.72
10.85
10.98
11.11
11.23
11.35
11.47
11.58
11.68
11.79
11.89
11.98
12.07
12.16
12.24
12.32
12.39
12.46
12.53
12.59
12.65
12.70
12.75
12.79
12.83
12.87
12.90
5.29
6.68
9.07
13.34
0.59
1.07
1.51
1.92
2.31
2.69
3.05
3.39
3.73
4.06
4.38
4.69
4.99
5.29
5.58
5.86
6.14
6.42
6.68
6.94
7.20
7.45
7.70
7.94
8.17
8.40
8.63
8.85
9.07
9.28
9.49
9.70
9.90
10.09
10.28
10.47
10.65
10.83
11.00
11.17
11.33
11.49
11.65
11.80
11.95
12.09
12.22
12.36
12.48
12.61
12.73
12.84
12.95
13.05
13.15
13.25
13.34
13.42
13.50
13.58
13.65
13.71
13.77
13.83
13.88
13.92
13.96
14.00
14.03
14.05
5.76
7.28
9.89
14.45
0.64
1.16
1.64
2.08
2.51
2.92
3.31
3.69
4.06
4.42
4.76
5.10
5.44
5.76
6.08
6.39
6.69
6.99
7.28
7.57
7.85
8.12
8.39
8.66
8.91
9.17
9.41
9.66
9.89
10.12
10.35
10.57
10.79
11.00
11.21
11.41
11.61
11.80
11.99
12.17
12.34
12.52
12.68
12.84
13.00
13.15
13.29
13.43
13.57
13.70
13.82
13.94
14.05
14.16
14.26
14.36
14.45
14.53
14.61
14.68
14.75
14.81
14.87
14.92
14.96
15.00
15.03
15.05
15.07
15.08
6.69
8.46
11.49
16.45
0.74
1.34
1.89
2.41
2.90
3.37
3.83
4.27
4.70
5.12
5.52
5.92
6.31
6.69
7.06
7.42
7.77
8.12
8.46
8.79
9.12
9.44
9.75
10.06
10.35
10.65
10.93
11.21
11.49
11.75
12.01
12.27
12.51
12.76
12.99
13.22
13.44
13.66
13.87
14.07
14.26
14.45
14.64
14.81
14.98
15.14
15.30
15.44
15.58
15.72
15.84
15.96
16.08
16.18
16.28
16.37
16.45
16.52
16.59
16.65
16.70
16.74
16.77
16.80
16.82
16.83
16.83
16.82
16.81
16.78
7.59
9.61
13.01
18.14
0.83
1.51
2.14
2.72
3.28
3.82
4.34
4.84
5.33
5.81
6.27
6.72
7.16
7.59
8.01
8.42
8.83
9.22
9.61
9.98
10.35
10.71
11.06
11.41
11.75
12.07
12.39
12.71
13.01
13.31
13.60
13.88
14.15
14.42
14.68
14.92
15.16
15.40
15.62
15.84
16.04
16.24
16.43
16.62
16.79
16.95
17.11
17.25
17.39
17.52
17.63
17.74
17.84
17.93
18.01
18.08
18.14
18.19
18.23
18.26
18.27
18.28
18.28
18.26
18.24
8.65
10.94
14.76
19.73
0.94
1.72
2.43
3.10
3.74
4.35
4.94
5.52
6.08
6.62
7.15
7.66
8.16
8.65
9.13
9.60
10.06
10.50
10.94
11.37
11.78
12.19
12.59
12.97
13.35
13.72
14.07
14.42
14.76
15.08
15.40
15.71
16.00
16.29
16.56
16.83
17.08
17.33
17.56
17.78
17.99
18.19
18.38
18.56
18.72
18.87
19.01
19.14
19.26
19.36
19.45
19.53
19.60
19.65
19.69
19.72
19.73
19.73
19.72
19.69
9.77
12.34
16.54
20.88
1.06
1.94
2.74
3.50
4.22
4.91
5.59
6.23
6.86
7.48
8.07
8.65
9.22
9.77
10.31
10.84
11.35
11.85
12.34
12.82
13.28
13.73
14.17
14.59
15.01
15.41
15.80
16.17
16.54
16.89
17.22
17.55
17.86
18.16
18.44
18.71
18.97
19.21
19.44
19.66
19.86
20.04
20.21
20.36
20.50
20.63
20.73
20.82
20.90
20.96
21.00
21.02
21.03
21.02
20.99
11.03
13.89
18.44
21.39
1.20
2.19
3.09
3.95
4.77
5.55
6.31
7.05
7.76
8.45
9.12
9.77
10.41
11.03
11.64
12.22
12.80
13.35
13.89
14.42
14.93
15.42
15.90
16.37
16.81
17.25
17.66
18.06
18.44
18.81
19.16
19.49
19.81
20.11
20.38
20.65
20.89
21.11
21.32
21.50
21.67
21.81
21.94
22.05
22.13
22.19
22.23
22.25
22.25
22.23
12.45
15.62
20.47
20.80
1.35
2.47
3.50
4.47
5.40
6.29
7.14
7.97
8.77
9.55
10.31
11.04
11.76
12.45
13.13
13.78
14.41
15.03
15.62
16.20
16.76
17.29
17.81
18.30
18.78
19.23
19.67
20.08
20.47
20.83
21.18
21.50
21.80
22.07
22.33
22.55
22.75
22.93
23.08
23.20
23.30
23.37
23.41
23.42
23.40
335
355
400
450
500
630
1.53
2.79
3.96
5.06
6.10
7.10
8.07
9.00
9.91
10.78
11.63
12.45
13.25
14.02
14.76
15.48
16.18
16.85
17.50
18.12
18.71
19.28
19.82
20.34
20.83
21.29
21.72
22.12
22.50
22.84
23.15
23.43
23.68
23.90
24.09
1.72
3.15
4.46
5.70
6.88
8.00
9.09
10.14
11.15
12.12
13.07
13.98
14.86
15.70
16.52
17.30
18.06
18.78
19.46
20.12
20.74
21.32
21.87
22.39
22.87
23.31
23.71
24.07
24.39
24.67
24.91
25.11
25.27
25.37
25.44
1.94
3.54
5.01
6.40
7.72
8.98
10.19
11.36
12.48
13.56
14.60
15.60
16.56
17.48
18.36
19.20
20.00
20.76
21.47
22.14
22.76
23.34
23.87
24.35
24.78
25.16
25.49
25.77
25.99
26.15
2.15
3.93
5.56
7.09
8.55
9.94
11.27
12.55
13.78
14.95
16.08
17.16
18.19
19.17
20.10
20.97
21.80
22.57
23.28
23.94
24.53
25.07
25.55
25.96
26.31
2.69
4.90
6.93
8.83
10.62
12.33
13.95
15.49
16.96
18.34
19.65
20.87
22.02
23.07
24.04
24.93
25.71
26.40
26.99
27.48
27.86
28.13
28.28
28.31
28.23
Additional
per belt for
1,01 1,06
to
to
1,05 1,26
0.06 0.23
0.08 0.32
0.13 0.48
0.25 0.95
0.00 0.02
0.01 0.03
0.01 0.05
0.02 0.07
0.02 0.08
0.03 0.10
0.03 0.12
0.04 0.13
0.04 0.15
0.04 0.17
0.05 0.18
0.05 0.20
0.06 0.22
0.06 0.23
0.07 0.25
0.07 0.27
0.07 0.28
0.08 0.30
0.08 0.32
0.09 0.33
0.09 0.35
0.10 0.36
0.10 0.38
0.11 0.40
0.11 0.41
0.11 0.43
0.12 0.45
0.12 0.46
0.13 0.48
0.13 0.50
0.14 0.51
0.14 0.53
0.15 0.55
0.15 0.56
0.15 0.58
0.16 0.60
0.16 0.61
0.17 0.63
0.17 0.65
0.18 0.66
0.18 0.68
0.18 0.70
0.19 0.71
0.19 0.73
0.20 0.75
0.20 0.76
0.21 0.78
0.21 0.80
0.22 0.81
0.22 0.83
0.22 0.85
0.23 0.86
0.23 0.88
0.24 0.90
0.24 0.91
0.25 0.93
0.25 0.95
0.26 0.96
0.26 0.98
0.26 0.99
0.27 1.01
0.27 1.03
0.28 1.04
0.28 1.06
0.29 1.08
0.29 1.09
0.29 1.11
0.30 1.13
0.30 1.14
0.31 1.16
SUPER TX M=S
power (kW)
speed ratio i
1,27 >1,57
to
1,57
0.33
0.45
0.69
1.36
0.02
0.05
0.07
0.10
0.12
0.14
0.17
0.19
0.22
0.24
0.26
0.29
0.31
0.33
0.36
0.38
0.41
0.43
0.45
0.48
0.50
0.53
0.55
0.57
0.60
0.62
0.65
0.67
0.69
0.72
0.74
0.77
0.79
0.81
0.84
0.86
0.88
0.91
0.93
0.96
0.98
1.00
1.03
1.05
1.08
1.10
1.12
1.15
1.17
1.20
1.22
1.24
1.27
1.29
1.32
1.34
1.36
1.39
1.41
1.43
1.46
1.48
1.51
1.53
1.55
1.58
1.60
1.63
1.65
1.67
0.52
0.70
1.07
2.11
0.04
0.07
0.11
0.15
0.19
0.22
0.26
0.30
0.33
0.37
0.41
0.44
0.48
0.52
0.56
0.59
0.63
0.67
0.70
0.74
0.78
0.82
0.85
0.89
0.93
0.96
1.00
1.04
1.07
1.11
1.15
1.19
1.22
1.26
1.30
1.33
1.37
1.41
1.45
1.48
1.52
1.56
1.59
1.63
1.67
1.70
1.74
1.78
1.82
1.85
1.89
1.93
1.96
2.00
2.04
2.08
2.11
2.15
2.19
2.22
2.26
2.30
2.33
2.37
2.41
2.45
2.48
2.52
2.56
2.59
v (m/s)
Dynamically balanced (for details see DIN 2211)
Pulleys
99
Power Ratings
Section 5 raw edge moulded cogged
Nominal Power Rating PN (kW) for = 180 and Ld = 312 mm
Statically balanced
v (m/s)
Pulleys
Table 44
nk
(min-1)
16
18
20
22.4
25
28
31.5
33.5
40
45
700
950
1450
2850
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
5100
5200
5300
5400
5500
5600
5700
5800
5900
6000
0.02
0.02
0.03
0.06
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.02
0.03
0.03
0.03
0.03
0.03
0.03
0.04
0.04
0.04
0.04
0.04
0.05
0.05
0.05
0.05
0.05
0.05
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.07
0.07
0.07
0.07
0.07
0.07
0.07
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.10
0.10
0.10
0.10
0.10
0.10
0.02
0.03
0.04
0.07
0.01
0.01
0.01
0.02
0.02
0.02
0.03
0.03
0.03
0.03
0.04
0.04
0.04
0.04
0.05
0.05
0.05
0.05
0.06
0.06
0.06
0.06
0.06
0.07
0.07
0.07
0.07
0.07
0.08
0.08
0.08
0.08
0.08
0.09
0.09
0.09
0.09
0.09
0.10
0.10
0.10
0.10
0.10
0.11
0.11
0.11
0.11
0.11
0.12
0.12
0.12
0.12
0.12
0.12
0.13
0.13
0.13
0.13
0.13
0.03
0.04
0.05
0.09
0.01
0.01
0.02
0.02
0.02
0.03
0.03
0.03
0.04
0.04
0.04
0.05
0.05
0.05
0.06
0.06
0.06
0.06
0.07
0.07
0.07
0.07
0.08
0.08
0.08
0.09
0.09
0.09
0.09
0.10
0.10
0.10
0.10
0.11
0.11
0.11
0.11
0.12
0.12
0.12
0.12
0.13
0.13
0.13
0.13
0.13
0.14
0.14
0.14
0.14
0.15
0.15
0.15
0.15
0.16
0.16
0.16
0.16
0.16
0.03
0.04
0.06
0.11
0.01
0.02
0.02
0.02
0.03
0.03
0.04
0.04
0.04
0.05
0.05
0.06
0.06
0.06
0.07
0.07
0.07
0.08
0.08
0.08
0.09
0.09
0.09
0.10
0.10
0.10
0.11
0.11
0.11
0.12
0.12
0.12
0.13
0.13
0.13
0.13
0.14
0.14
0.14
0.15
0.15
0.15
0.16
0.16
0.16
0.16
0.17
0.17
0.17
0.18
0.18
0.18
0.18
0.19
0.19
0.19
0.19
0.20
0.20
0.04
0.05
0.07
0.13
0.01
0.02
0.02
0.03
0.03
0.04
0.04
0.05
0.05
0.06
0.06
0.07
0.07
0.07
0.08
0.08
0.09
0.09
0.09
0.10
0.10
0.11
0.11
0.11
0.12
0.12
0.13
0.13
0.13
0.14
0.14
0.14
0.15
0.15
0.16
0.16
0.16
0.17
0.17
0.17
0.18
0.18
0.18
0.19
0.19
0.20
0.20
0.20
0.21
0.21
0.21
0.22
0.22
0.22
0.23
0.23
0.23
0.24
0.24
0.04
0.06
0.08
0.15
0.02
0.02
0.03
0.03
0.04
0.04
0.05
0.06
0.06
0.07
0.07
0.08
0.08
0.09
0.09
0.10
0.10
0.11
0.11
0.12
0.12
0.13
0.13
0.13
0.14
0.14
0.15
0.15
0.16
0.16
0.17
0.17
0.18
0.18
0.18
0.19
0.19
0.20
0.20
0.21
0.21
0.21
0.22
0.22
0.23
0.23
0.24
0.24
0.24
0.25
0.25
0.26
0.26
0.26
0.27
0.27
0.28
0.28
0.28
0.05
0.07
0.10
0.18
0.02
0.02
0.03
0.04
0.05
0.05
0.06
0.06
0.07
0.08
0.08
0.09
0.10
0.10
0.11
0.11
0.12
0.12
0.13
0.14
0.14
0.15
0.15
0.16
0.16
0.17
0.17
0.18
0.19
0.19
0.20
0.20
0.21
0.21
0.22
0.22
0.23
0.23
0.24
0.24
0.25
0.25
0.26
0.26
0.27
0.27
0.28
0.28
0.29
0.29
0.30
0.30
0.31
0.31
0.32
0.32
0.33
0.33
0.34
0.06
0.07
0.11
0.19
0.02
0.03
0.03
0.04
0.05
0.06
0.06
0.07
0.08
0.08
0.09
0.10
0.10
0.11
0.12
0.12
0.13
0.13
0.14
0.15
0.15
0.16
0.17
0.17
0.18
0.18
0.19
0.19
0.20
0.21
0.21
0.22
0.22
0.23
0.24
0.24
0.25
0.25
0.26
0.26
0.27
0.27
0.28
0.28
0.29
0.30
0.30
0.31
0.31
0.32
0.32
0.33
0.33
0.34
0.34
0.35
0.35
0.36
0.36
0.07
0.09
0.13
0.24
0.02
0.03
0.04
0.05
0.06
0.07
0.08
0.09
0.10
0.10
0.11
0.12
0.13
0.14
0.14
0.15
0.16
0.17
0.18
0.18
0.19
0.20
0.21
0.21
0.22
0.23
0.24
0.24
0.25
0.26
0.27
0.27
0.28
0.29
0.29
0.30
0.31
0.32
0.32
0.33
0.34
0.34
0.35
0.36
0.36
0.37
0.38
0.38
0.39
0.40
0.40
0.41
0.42
0.42
0.43
0.44
0.44
0.45
0.46
0.08
0.10
0.15
0.28
0.03
0.04
0.05
0.06
0.07
0.08
0.09
0.10
0.11
0.12
0.13
0.14
0.15
0.16
0.17
0.18
0.18
0.19
0.20
0.21
0.22
0.23
0.24
0.25
0.25
0.26
0.27
0.28
0.29
0.30
0.31
0.31
0.32
0.33
0.34
0.35
0.36
0.36
0.37
0.38
0.39
0.40
0.40
0.41
0.42
0.43
0.44
0.44
0.45
0.46
0.47
0.47
0.48
0.49
0.50
0.50
0.51
0.52
0.53
VB
Additional
per belt for
1,01 1,06
to
to
1,05 1,26
0.000
0.000
0.001
0.001
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.002
0.002
0.002
0.002
0.002
0.002
0.002
0.002
0.002
0.002
0.002
0.002
0.002
0.002
0.002
0.002
0.002
0.002
0.002
0.002
0.002
0.002
0.002
0.003
0.003
0.003
0.003
power (kW)
speed ratio i
1,27 >1,57
to
1,57
0.001
0.002
0.002
0.005
0.000
0.001
0.001
0.001
0.001
0.001
0.001
0.002
0.002
0.002
0.002
0.002
0.002
0.003
0.003
0.003
0.003
0.003
0.003
0.004
0.004
0.004
0.004
0.004
0.004
0.005
0.005
0.005
0.005
0.005
0.005
0.006
0.006
0.006
0.006
0.006
0.006
0.007
0.007
0.007
0.007
0.007
0.007
0.008
0.008
0.008
0.008
0.008
0.008
0.009
0.009
0.009
0.009
0.009
0.009
0.010
0.010
0.010
0.010
0.002
0.002
0.004
0.007
0.000
0.001
0.001
0.001
0.001
0.002
0.002
0.002
0.002
0.003
0.003
0.003
0.003
0.004
0.004
0.004
0.004
0.005
0.005
0.005
0.005
0.006
0.006
0.006
0.006
0.007
0.007
0.007
0.007
0.007
0.008
0.008
0.008
0.008
0.009
0.009
0.009
0.009
0.010
0.010
0.010
0.010
0.011
0.011
0.011
0.011
0.012
0.012
0.012
0.012
0.013
0.013
0.013
0.013
0.014
0.014
0.014
0.014
0.015
v (m/s)
Statically balanced
100
Pulleys
0.003
0.004
0.005
0.011
0.001
0.001
0.001
0.002
0.002
0.003
0.003
0.003
0.004
0.004
0.004
0.005
0.005
0.006
0.006
0.006
0.007
0.007
0.007
0.008
0.008
0.009
0.009
0.009
0.010
0.010
0.010
0.011
0.011
0.012
0.012
0.012
0.013
0.013
0.013
0.014
0.014
0.015
0.015
0.015
0.016
0.016
0.016
0.017
0.017
0.018
0.018
0.018
0.019
0.019
0.019
0.020
0.020
0.021
0.021
0.021
0.022
0.022
0.022
Power Ratings
Section Y/6 raw edge moulded cogged
Nominal Power Rating PN (kW) for = 180 and Ld = 315 mm
Statically balanced
v (m/s)
Pulleys
Table 45
nk
(min-1)
20
22.4
25
28
31.5
35.5
40
45
50
56
700
950
1450
2850
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
5100
5200
5300
5400
5500
5600
5700
5800
5900
6000
0.03
0.03
0.05
0.08
0.01
0.01
0.02
0.02
0.02
0.03
0.03
0.03
0.03
0.04
0.04
0.04
0.04
0.05
0.05
0.05
0.05
0.06
0.06
0.06
0.06
0.07
0.07
0.07
0.07
0.08
0.08
0.08
0.08
0.09
0.09
0.09
0.09
0.09
0.10
0.10
0.10
0.10
0.10
0.11
0.11
0.11
0.11
0.11
0.12
0.12
0.12
0.12
0.12
0.12
0.13
0.13
0.13
0.13
0.13
0.14
0.14
0.14
0.14
0.03
0.04
0.06
0.11
0.01
0.02
0.02
0.02
0.03
0.03
0.04
0.04
0.04
0.05
0.05
0.06
0.06
0.06
0.07
0.07
0.07
0.08
0.08
0.08
0.09
0.09
0.09
0.10
0.10
0.10
0.11
0.11
0.11
0.12
0.12
0.12
0.13
0.13
0.13
0.14
0.14
0.14
0.14
0.15
0.15
0.15
0.16
0.16
0.16
0.16
0.17
0.17
0.17
0.17
0.18
0.18
0.18
0.19
0.19
0.19
0.19
0.20
0.20
0.04
0.05
0.08
0.14
0.01
0.02
0.03
0.03
0.04
0.04
0.05
0.05
0.06
0.06
0.07
0.07
0.08
0.08
0.09
0.09
0.09
0.10
0.10
0.11
0.11
0.12
0.12
0.13
0.13
0.13
0.14
0.14
0.15
0.15
0.16
0.16
0.16
0.17
0.17
0.18
0.18
0.18
0.19
0.19
0.19
0.20
0.20
0.21
0.21
0.21
0.22
0.22
0.22
0.23
0.23
0.24
0.24
0.24
0.25
0.25
0.25
0.26
0.26
0.05
0.07
0.10
0.18
0.02
0.02
0.03
0.04
0.04
0.05
0.06
0.06
0.07
0.08
0.08
0.09
0.09
0.10
0.11
0.11
0.12
0.12
0.13
0.14
0.14
0.15
0.15
0.16
0.16
0.17
0.17
0.18
0.18
0.19
0.20
0.20
0.21
0.21
0.22
0.22
0.23
0.23
0.24
0.24
0.25
0.25
0.26
0.26
0.27
0.27
0.28
0.28
0.28
0.29
0.29
0.30
0.30
0.31
0.31
0.32
0.32
0.33
0.33
0.06
0.08
0.12
0.22
0.02
0.03
0.04
0.05
0.05
0.06
0.07
0.08
0.09
0.09
0.10
0.11
0.12
0.12
0.13
0.14
0.15
0.15
0.16
0.17
0.17
0.18
0.19
0.19
0.20
0.21
0.22
0.22
0.23
0.24
0.24
0.25
0.25
0.26
0.27
0.27
0.28
0.29
0.29
0.30
0.31
0.31
0.32
0.32
0.33
0.34
0.34
0.35
0.35
0.36
0.36
0.37
0.38
0.38
0.39
0.39
0.40
0.40
0.41
0.08
0.10
0.15
0.27
0.02
0.03
0.05
0.06
0.07
0.08
0.08
0.09
0.10
0.11
0.12
0.13
0.14
0.15
0.16
0.17
0.18
0.19
0.19
0.20
0.21
0.22
0.23
0.24
0.24
0.25
0.26
0.27
0.28
0.29
0.29
0.30
0.31
0.32
0.33
0.33
0.34
0.35
0.36
0.36
0.37
0.38
0.39
0.39
0.40
0.41
0.42
0.42
0.43
0.44
0.44
0.45
0.46
0.47
0.47
0.48
0.49
0.49
0.50
0.09
0.12
0.17
0.32
0.03
0.04
0.05
0.07
0.08
0.09
0.10
0.11
0.12
0.14
0.15
0.16
0.17
0.18
0.19
0.20
0.21
0.22
0.23
0.24
0.25
0.26
0.27
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.44
0.45
0.46
0.47
0.48
0.49
0.50
0.51
0.51
0.52
0.53
0.54
0.55
0.56
0.56
0.57
0.58
0.59
0.60
0.11
0.14
0.20
0.38
0.03
0.05
0.06
0.08
0.09
0.11
0.12
0.13
0.15
0.16
0.17
0.19
0.20
0.21
0.22
0.24
0.25
0.26
0.27
0.29
0.30
0.31
0.32
0.33
0.35
0.36
0.37
0.38
0.39
0.40
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
0.50
0.51
0.52
0.54
0.55
0.56
0.57
0.58
0.59
0.60
0.61
0.62
0.63
0.64
0.65
0.65
0.66
0.67
0.68
0.69
0.70
0.12
0.16
0.24
0.43
0.04
0.06
0.07
0.09
0.10
0.12
0.14
0.15
0.17
0.18
0.20
0.21
0.23
0.24
0.26
0.27
0.29
0.30
0.32
0.33
0.34
0.36
0.37
0.38
0.40
0.41
0.43
0.44
0.45
0.47
0.48
0.49
0.50
0.52
0.53
0.54
0.55
0.57
0.58
0.59
0.60
0.61
0.63
0.64
0.65
0.66
0.67
0.68
0.70
0.71
0.72
0.73
0.74
0.75
0.76
0.77
0.78
0.79
0.80
0.14
0.18
0.27
0.50
0.04
0.06
0.08
0.10
0.12
0.14
0.16
0.18
0.19
0.21
0.23
0.25
0.26
0.28
0.30
0.31
0.33
0.35
0.36
0.38
0.40
0.41
0.43
0.44
0.46
0.48
0.49
0.51
0.52
0.54
0.55
0.57
0.58
0.60
0.61
0.62
0.64
0.65
0.67
0.68
0.69
0.71
0.72
0.73
0.75
0.76
0.77
0.79
0.80
0.81
0.82
0.84
0.85
0.86
0.87
0.88
0.89
0.90
0.91
VB
Additional
per belt for
1,01 1,06
to
to
1,05 1,26
0.001
0.001
0.002
0.004
0.000
0.000
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.002
0.002
0.002
0.002
0.002
0.002
0.002
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.003
0.004
0.004
0.004
0.004
0.004
0.004
0.004
0.004
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.006
0.006
0.006
0.006
0.006
0.006
0.006
0.006
0.007
0.007
0.007
0.007
0.007
0.007
0.007
0.008
0.008
0.008
0.008
power (kW)
speed ratio i
1,27 >1,57
to
1,57
0.003
0.005
0.007
0.014
0.001
0.001
0.002
0.002
0.003
0.003
0.004
0.004
0.005
0.005
0.006
0.006
0.007
0.007
0.008
0.008
0.009
0.009
0.010
0.010
0.011
0.011
0.012
0.012
0.013
0.013
0.014
0.014
0.015
0.015
0.016
0.016
0.017
0.017
0.018
0.018
0.019
0.019
0.020
0.020
0.021
0.021
0.022
0.022
0.023
0.023
0.024
0.024
0.025
0.025
0.026
0.026
0.027
0.027
0.028
0.028
0.029
0.029
0.030
0.005
0.007
0.010
0.020
0.001
0.002
0.003
0.004
0.004
0.005
0.006
0.006
0.007
0.008
0.009
0.009
0.010
0.011
0.011
0.012
0.013
0.014
0.014
0.015
0.016
0.016
0.017
0.018
0.019
0.019
0.020
0.021
0.021
0.022
0.023
0.024
0.024
0.025
0.026
0.026
0.027
0.028
0.029
0.029
0.030
0.031
0.031
0.032
0.033
0.034
0.034
0.035
0.036
0.037
0.037
0.038
0.039
0.039
0.040
0.041
0.042
0.042
0.043
0.008
0.011
0.016
0.032
0.002
0.003
0.004
0.006
0.007
0.008
0.009
0.010
0.011
0.012
0.013
0.014
0.016
0.017
0.018
0.019
0.020
0.021
0.022
0.023
0.024
0.026
0.027
0.028
0.029
0.030
0.031
0.032
0.033
0.034
0.036
0.037
0.038
0.039
0.040
0.041
0.042
0.043
0.044
0.045
0.047
0.048
0.049
0.050
0.051
0.052
0.053
0.054
0.055
0.057
0.058
0.059
0.060
0.061
0.062
0.063
0.064
0.065
0.067
v (m/s)
Statically balanced
Pulleys
101
Power Ratings
Section 8
Nominal Power Rating PN (kW) for = 180 and Ld = 579 mm
v (m/s)
nk
Additional
per belt for
1,01 1,06
to
to
1,05 1,26
(min-1)
35
40
45
50
56
63
71
80
90
700
950
1450
2850
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
5100
5200
5300
5400
5500
5600
5700
5800
5900
6000
6200
6400
6600
6800
7000
7200
7400
7600
7800
8000
0.12
0.15
0.19
0.28
0.03
0.05
0.06
0.08
0.09
0.11
0.12
0.13
0.14
0.15
0.16
0.17
0.18
0.19
0.20
0.20
0.21
0.22
0.22
0.23
0.24
0.24
0.25
0.25
0.26
0.27
0.27
0.27
0.28
0.28
0.29
0.29
0.30
0.30
0.30
0.31
0.31
0.31
0.31
0.32
0.32
0.32
0.32
0.33
0.33
0.33
0.33
0.33
0.33
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.34
0.33
0.33
0.33
0.32
0.32
0.15
0.19
0.25
0.38
0.03
0.06
0.08
0.10
0.12
0.13
0.15
0.17
0.18
0.19
0.21
0.22
0.23
0.24
0.26
0.27
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.34
0.35
0.36
0.37
0.38
0.38
0.39
0.40
0.40
0.41
0.42
0.42
0.43
0.43
0.44
0.44
0.45
0.45
0.46
0.46
0.47
0.47
0.48
0.48
0.48
0.49
0.49
0.49
0.50
0.50
0.50
0.51
0.51
0.51
0.51
0.51
0.52
0.52
0.52
0.52
0.53
0.53
0.53
0.53
0.53
0.53
0.52
0.18
0.23
0.31
0.48
0.04
0.07
0.09
0.12
0.14
0.16
0.18
0.20
0.22
0.24
0.25
0.27
0.29
0.30
0.32
0.33
0.34
0.36
0.37
0.38
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
0.50
0.51
0.52
0.53
0.54
0.55
0.55
0.56
0.57
0.58
0.58
0.59
0.60
0.60
0.61
0.62
0.62
0.63
0.63
0.64
0.64
0.65
0.65
0.66
0.66
0.67
0.67
0.68
0.68
0.68
0.69
0.69
0.70
0.70
0.71
0.71
0.71
0.72
0.72
0.72
0.21
0.27
0.37
0.57
0.04
0.08
0.11
0.14
0.16
0.19
0.21
0.24
0.26
0.28
0.30
0.32
0.34
0.36
0.37
0.39
0.41
0.42
0.44
0.46
0.47
0.49
0.50
0.51
0.53
0.54
0.56
0.57
0.58
0.59
0.60
0.62
0.63
0.64
0.65
0.66
0.67
0.68
0.69
0.70
0.71
0.72
0.73
0.73
0.74
0.75
0.76
0.77
0.77
0.78
0.79
0.79
0.80
0.81
0.81
0.82
0.83
0.83
0.84
0.84
0.85
0.86
0.87
0.87
0.88
0.88
0.89
0.89
0.89
0.89
0.25
0.32
0.43
0.69
0.05
0.09
0.13
0.16
0.19
0.22
0.25
0.28
0.30
0.33
0.35
0.38
0.40
0.42
0.44
0.46
0.48
0.50
0.52
0.54
0.56
0.58
0.60
0.61
0.63
0.65
0.66
0.68
0.69
0.71
0.72
0.74
0.75
0.77
0.78
0.79
0.81
0.82
0.83
0.84
0.85
0.86
0.88
0.89
0.90
0.91
0.92
0.93
0.94
0.94
0.95
0.96
0.97
0.98
0.99
0.99
1.00
1.01
1.01
1.02
1.03
1.04
1.05
1.06
1.07
1.07
1.08
1.08
1.09
1.09
0.29
0.37
0.51
0.81
0.06
0.11
0.15
0.19
0.22
0.26
0.29
0.32
0.35
0.38
0.41
0.44
0.47
0.49
0.52
0.55
0.57
0.59
0.62
0.64
0.66
0.68
0.70
0.73
0.75
0.77
0.79
0.80
0.82
0.84
0.86
0.88
0.89
0.91
0.93
0.94
0.96
0.97
0.99
1.00
1.02
1.03
1.04
1.06
1.07
1.08
1.09
1.10
1.11
1.13
1.14
1.15
1.16
1.17
1.17
1.18
1.19
1.20
1.21
1.22
1.23
1.24
1.25
1.26
1.27
1.28
1.28
1.29
1.29
1.29
0.34
0.43
0.59
0.95
0.07
0.12
0.17
0.22
0.26
0.30
0.34
0.38
0.41
0.45
0.48
0.51
0.55
0.58
0.61
0.64
0.67
0.69
0.72
0.75
0.77
0.80
0.83
0.85
0.87
0.90
0.92
0.94
0.96
0.99
1.01
1.03
1.05
1.07
1.09
1.10
1.12
1.14
1.16
1.17
1.19
1.21
1.22
1.24
1.25
1.27
1.28
1.29
1.31
1.32
1.33
1.34
1.35
1.36
1.38
1.38
1.39
1.40
1.41
1.42
1.43
1.45
1.46
1.47
1.48
1.48
1.48
1.49
1.49
1.48
0.39
0.50
0.69
1.11
0.08
0.14
0.20
0.25
0.30
0.35
0.39
0.43
0.48
0.52
0.56
0.59
0.63
0.67
0.70
0.74
0.77
0.80
0.84
0.87
0.90
0.93
0.96
0.98
1.01
1.04
1.07
1.09
1.12
1.14
1.17
1.19
1.21
1.24
1.26
1.28
1.30
1.32
1.34
1.36
1.38
1.40
1.41
1.43
1.45
1.46
1.48
1.49
1.51
1.52
1.53
1.55
1.56
1.57
1.58
1.59
1.60
1.61
1.62
1.63
1.64
1.65
1.66
1.67
1.67
1.67
1.67
1.67
1.66
1.65
0.45
0.57
0.79
1.27
0.09
0.16
0.23
0.28
0.34
0.40
0.45
0.50
0.55
0.59
0.64
0.68
0.72
0.77
0.81
0.85
0.88
0.92
0.96
0.99
1.03
1.06
1.10
1.13
1.16
1.19
1.22
1.25
1.28
1.31
1.34
1.36
1.39
1.41
1.44
1.46
1.49
1.51
1.53
1.55
1.57
1.59
1.61
1.63
1.65
1.66
1.68
1.69
1.71
1.72
1.74
1.75
1.76
1.77
1.78
1.79
1.80
1.81
1.82
1.82
1.83
1.84
1.84
1.84
1.84
1.84
1.83
1.81
1.80
1.78
VB
Where v > 30 m/s, please consult our
Applications Engineering Department
Statically balanced
Pulleys
Table 46
0.00
0.00
0.00
0.01
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.01
0.01
0.02
0.03
0.00
0.00
0.00
0.00
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.04
0.04
0.04
0.04
0.04
0.04
0.04
0.04
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.07
0.07
0.07
0.07
0.07
0.07
0.08
0.08
0.08
0.08
0.09
0.09
0.09
0.09
power (kW)
speed ratio i
1,27 >1,57
to
1,57
0.01
0.02
0.03
0.05
0.00
0.00
0.01
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.02
0.02
0.03
0.03
0.03
0.03
0.03
0.04
0.04
0.04
0.04
0.04
0.04
0.05
0.05
0.05
0.05
0.05
0.06
0.06
0.06
0.06
0.06
0.06
0.07
0.07
0.07
0.07
0.07
0.08
0.08
0.08
0.08
0.08
0.09
0.09
0.09
0.09
0.09
0.09
0.10
0.10
0.10
0.10
0.10
0.11
0.11
0.11
0.11
0.11
0.12
0.12
0.13
0.13
0.13
0.14
0.14
0.14
0.15
v (m/s)
Dynamically balanced
102
Pulleys
0.01
0.02
0.03
0.06
0.00
0.00
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.02
0.02
0.03
0.03
0.03
0.03
0.04
0.04
0.04
0.04
0.04
0.05
0.05
0.05
0.05
0.05
0.06
0.06
0.06
0.06
0.06
0.07
0.07
0.07
0.07
0.07
0.08
0.08
0.08
0.08
0.09
0.09
0.09
0.09
0.09
0.10
0.10
0.10
0.10
0.10
0.11
0.11
0.11
0.11
0.11
0.12
0.12
0.12
0.12
0.12
0.13
0.13
0.14
0.14
0.15
0.15
0.15
0.16
0.16
0.17
Power Ratings
Section Z/10
Nominal Power Rating PN (kW) for = 180 and Ld = 822 mm
v (m/s)
nk
Additional
per belt for
1,01 1,06
to
to
1,05 1,26
(min-1)
45
50
56
63
71
80
90
100
112
700
950
1450
2850
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
5100
5200
5300
5400
5500
5600
5800
6000
6200
6400
6600
6800
7000
7200
7400
7600
7800
8000
8200
8400
0.18
0.22
0.29
0.42
0.04
0.07
0.09
0.12
0.14
0.16
0.18
0.19
0.21
0.23
0.24
0.25
0.27
0.28
0.29
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.39
0.40
0.41
0.42
0.42
0.43
0.44
0.44
0.45
0.46
0.46
0.47
0.47
0.48
0.48
0.48
0.49
0.49
0.49
0.50
0.50
0.50
0.50
0.51
0.51
0.51
0.51
0.51
0.51
0.51
0.51
0.51
0.51
0.51
0.51
0.50
0.50
0.49
0.49
0.48
0.47
0.46
0.45
0.44
0.42
0.41
0.22
0.28
0.38
0.58
0.05
0.08
0.12
0.15
0.17
0.20
0.22
0.25
0.27
0.29
0.31
0.33
0.35
0.37
0.39
0.40
0.42
0.44
0.45
0.47
0.48
0.50
0.51
0.52
0.54
0.55
0.56
0.57
0.59
0.60
0.61
0.62
0.63
0.64
0.65
0.66
0.67
0.68
0.68
0.69
0.70
0.71
0.71
0.72
0.73
0.73
0.74
0.74
0.75
0.75
0.76
0.76
0.77
0.77
0.77
0.78
0.78
0.79
0.79
0.79
0.79
0.79
0.79
0.78
0.78
0.77
0.77
0.76
0.75
0.74
0.28
0.35
0.48
0.77
0.06
0.10
0.14
0.18
0.21
0.25
0.28
0.31
0.34
0.37
0.39
0.42
0.45
0.47
0.49
0.52
0.54
0.56
0.59
0.61
0.63
0.65
0.67
0.69
0.70
0.72
0.74
0.76
0.77
0.79
0.81
0.82
0.84
0.85
0.87
0.88
0.90
0.91
0.92
0.93
0.95
0.96
0.97
0.98
0.99
1.00
1.01
1.02
1.03
1.04
1.05
1.05
1.06
1.07
1.08
1.08
1.09
1.10
1.11
1.12
1.12
1.13
1.13
1.13
1.13
1.12
1.12
1.11
1.11
1.10
0.34
0.44
0.60
0.98
0.07
0.12
0.17
0.22
0.26
0.30
0.34
0.38
0.42
0.45
0.49
0.52
0.56
0.59
0.62
0.65
0.68
0.71
0.74
0.77
0.79
0.82
0.85
0.87
0.90
0.92
0.94
0.97
0.99
1.01
1.03
1.06
1.08
1.10
1.12
1.14
1.15
1.17
1.19
1.21
1.22
1.24
1.26
1.27
1.29
1.30
1.32
1.33
1.34
1.35
1.37
1.38
1.39
1.40
1.41
1.42
1.44
1.45
1.47
1.48
1.49
1.49
1.50
1.50
1.50
1.50
1.49
1.49
1.48
1.47
0.42
0.53
0.74
1.22
0.08
0.15
0.21
0.26
0.32
0.37
0.42
0.46
0.51
0.55
0.60
0.64
0.68
0.72
0.76
0.80
0.84
0.87
0.91
0.94
0.98
1.01
1.05
1.08
1.11
1.14
1.17
1.20
1.23
1.26
1.29
1.31
1.34
1.37
1.39
1.42
1.44
1.46
1.49
1.51
1.53
1.55
1.57
1.59
1.61
1.63
1.65
1.67
1.68
1.70
1.71
1.73
1.74
1.76
1.77
1.78
1.80
1.82
1.84
1.85
1.86
1.87
1.88
1.88
1.88
1.88
1.87
1.86
1.85
1.83
0.50
0.64
0.89
1.47
0.10
0.17
0.25
0.31
0.38
0.44
0.50
0.55
0.61
0.66
0.72
0.77
0.82
0.87
0.91
0.96
1.01
1.05
1.10
1.14
1.18
1.22
1.26
1.30
1.34
1.38
1.42
1.46
1.49
1.53
1.56
1.59
1.63
1.66
1.69
1.72
1.75
1.78
1.81
1.83
1.86
1.89
1.91
1.93
1.96
1.98
2.00
2.02
2.04
2.06
2.08
2.10
2.11
2.13
2.14
2.16
2.18
2.20
2.22
2.23
2.24
2.25
2.25
2.25
2.24
2.23
2.22
2.20
2.17
2.15
0.59
0.75
1.06
1.75
0.11
0.20
0.29
0.37
0.44
0.51
0.59
0.65
0.72
0.78
0.85
0.91
0.97
1.03
1.08
1.14
1.19
1.25
1.30
1.35
1.40
1.45
1.50
1.55
1.60
1.64
1.69
1.73
1.77
1.81
1.85
1.89
1.93
1.97
2.01
2.04
2.08
2.11
2.14
2.17
2.20
2.23
2.26
2.29
2.32
2.34
2.37
2.39
2.41
2.43
2.45
2.47
2.49
2.50
2.52
2.53
2.56
2.57
2.59
2.60
2.60
2.60
2.59
2.58
2.56
2.53
2.50
2.47
0.67
0.86
1.22
2.02
0.13
0.23
0.33
0.42
0.51
0.59
0.67
0.75
0.83
0.90
0.97
1.05
1.11
1.18
1.25
1.31
1.38
1.44
1.50
1.56
1.62
1.68
1.73
1.79
1.84
1.89
1.94
1.99
2.04
2.09
2.14
2.18
2.22
2.27
2.31
2.35
2.39
2.42
2.46
2.49
2.53
2.56
2.59
2.62
2.65
2.67
2.70
2.72
2.75
2.77
2.79
2.80
2.82
2.83
2.85
2.86
2.88
2.89
2.90
2.89
2.88
2.87
2.85
2.82
2.78
0.77
1.00
1.40
2.33
0.15
0.27
0.38
0.48
0.58
0.68
0.77
0.87
0.95
1.04
1.12
1.21
1.29
1.37
1.44
1.52
1.59
1.66
1.73
1.80
1.87
1.94
2.00
2.06
2.12
2.18
2.24
2.30
2.35
2.41
2.46
2.51
2.56
2.60
2.65
2.69
2.74
2.78
2.81
2.85
2.89
2.92
2.95
2.98
3.01
3.04
3.06
3.08
3.10
3.12
3.14
3.15
3.16
3.17
3.18
3.19
3.19
3.19
3.18
3.15
3.12
3.08
3.03
2.97
2.90
VB
Where v > 30 m/s, please consult our
Applications Engineering Department
Statically balanced
Pulleys
Table 47
0.00
0.00
0.01
0.01
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.04
0.04
0.04
0.04
0.04
0.04
0.02
0.02
0.03
0.07
0.00
0.00
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.02
0.03
0.03
0.03
0.03
0.04
0.04
0.04
0.04
0.05
0.05
0.05
0.05
0.06
0.06
0.06
0.06
0.06
0.07
0.07
0.07
0.07
0.08
0.08
0.08
0.08
0.09
0.09
0.09
0.09
0.10
0.10
0.10
0.10
0.11
0.11
0.11
0.11
0.12
0.12
0.12
0.12
0.13
0.13
0.13
0.13
0.13
0.14
0.14
0.15
0.15
0.16
0.16
0.17
0.17
0.18
0.18
0.19
0.19
0.20
0.20
power (kW)
speed ratio i
1,27 >1,57
to
1,57
0.03
0.04
0.06
0.11
0.00
0.01
0.01
0.02
0.02
0.02
0.03
0.03
0.03
0.04
0.04
0.05
0.05
0.05
0.06
0.06
0.07
0.07
0.07
0.08
0.08
0.08
0.09
0.09
0.10
0.10
0.10
0.11
0.11
0.12
0.12
0.12
0.13
0.13
0.13
0.14
0.14
0.15
0.15
0.15
0.16
0.16
0.17
0.17
0.17
0.18
0.18
0.18
0.19
0.19
0.20
0.20
0.20
0.21
0.21
0.22
0.22
0.23
0.24
0.25
0.25
0.26
0.27
0.28
0.28
0.29
0.30
0.31
0.32
0.32
0.03
0.04
0.06
0.12
0.00
0.01
0.01
0.02
0.02
0.03
0.03
0.03
0.04
0.04
0.05
0.05
0.06
0.06
0.06
0.07
0.07
0.08
0.08
0.09
0.09
0.10
0.10
0.10
0.11
0.11
0.12
0.12
0.13
0.13
0.13
0.14
0.14
0.15
0.15
0.16
0.16
0.16
0.17
0.17
0.18
0.18
0.19
0.19
0.19
0.20
0.20
0.21
0.21
0.22
0.22
0.23
0.23
0.23
0.24
0.24
0.25
0.26
0.27
0.28
0.29
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.35
0.36
v (m/s)
Dynamically balanced (for details see DIN 2211)
Pulleys
103
Power Ratings
Section A/13
Nominal Power Rating PN (kW) for = 180 and Ld = 1730 mm
Statically balanced
v (m/s)
Pulleys
Table 48
nk
(min-1)
71
80
90
95
100
106
112
118
125
132
140
150
160
180
700
950
1450
2850
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
5100
5200
5300
5400
5500
5600
5700
5800
5900
6000
0.52
0.63
0.81
1.04
0.12
0.21
0.29
0.35
0.41
0.47
0.52
0.57
0.61
0.65
0.69
0.73
0.76
0.79
0.82
0.85
0.88
0.90
0.92
0.94
0.96
0.97
0.99
1.00
1.01
1.02
1.03
1.04
1.04
1.04
1.04
1.04
1.04
1.04
1.03
1.02
1.01
1.00
0.99
0.98
0.96
0.94
0.92
0.90
0.88
0.85
0.83
0.80
0.77
0.73
0.70
0.66
0.62
0.58
0.54
0.50
0.45
0.40
0.35
0.30
0.74
0.92
1.22
1.75
0.16
0.28
0.39
0.48
0.57
0.66
0.74
0.81
0.88
0.95
1.01
1.08
1.14
1.19
1.24
1.30
1.34
1.39
1.44
1.48
1.52
1.55
1.59
1.62
1.66
1.68
1.71
1.74
1.76
1.78
1.80
1.81
1.83
1.84
1.85
1.86
1.86
1.87
1.87
1.87
1.86
1.86
1.85
1.84
1.82
1.81
1.79
1.77
1.75
1.72
1.69
1.66
1.63
1.59
1.55
1.51
1.47
1.42
1.37
1.32
0.97
1.23
1.67
2.51
0.20
0.36
0.50
0.63
0.75
0.86
0.97
1.08
1.18
1.27
1.37
1.46
1.54
1.63
1.71
1.78
1.86
1.93
2.00
2.06
2.12
2.18
2.24
2.30
2.35
2.40
2.45
2.49
2.53
2.57
2.61
2.64
2.67
2.70
2.72
2.74
2.76
2.78
2.79
2.80
2.81
2.81
2.81
2.81
2.80
2.79
2.78
2.76
2.74
2.72
2.69
2.66
2.63
2.59
2.55
2.51
2.46
2.41
2.35
2.29
1.09
1.38
1.89
2.88
0.22
0.39
0.55
0.70
0.84
0.97
1.09
1.21
1.32
1.44
1.54
1.64
1.74
1.84
1.93
2.02
2.11
2.19
2.27
2.35
2.42
2.49
2.56
2.63
2.69
2.75
2.80
2.86
2.91
2.95
3.00
3.04
3.08
3.11
3.14
3.17
3.19
3.21
3.23
3.24
3.25
3.26
3.26
3.26
3.26
3.25
3.24
3.22
3.20
3.18
3.15
3.12
3.08
3.04
3.00
2.95
2.90
2.84
2.78
2.71
1.21
1.53
2.11
3.25
0.24
0.43
0.61
0.77
0.92
1.07
1.21
1.34
1.47
1.59
1.71
1.83
1.94
2.05
2.16
2.26
2.36
2.45
2.54
2.63
2.72
2.80
2.88
2.95
3.02
3.09
3.16
3.22
3.28
3.33
3.38
3.43
3.47
3.51
3.55
3.58
3.61
3.64
3.66
3.67
3.69
3.70
3.70
3.70
3.70
3.69
3.68
3.66
3.64
3.61
3.58
3.55
3.51
3.46
3.41
3.36
3.30
3.23
3.16
3.09
1.35
1.71
2.37
3.67
0.26
0.48
0.67
0.85
1.02
1.19
1.35
1.50
1.64
1.78
1.92
2.05
2.18
2.30
2.42
2.54
2.65
2.76
2.87
2.97
3.06
3.16
3.25
3.33
3.42
3.50
3.57
3.64
3.71
3.77
3.83
3.88
3.93
3.98
4.02
4.06
4.09
4.12
4.15
4.17
4.18
4.19
4.20
4.20
4.19
4.18
4.17
4.15
4.12
4.09
4.06
4.01
3.97
3.91
3.86
3.79
3.72
3.64
3.56
3.47
1.48
1.89
2.62
4.09
0.29
0.52
0.74
0.94
1.13
1.31
1.48
1.65
1.82
1.97
2.13
2.27
2.42
2.55
2.69
2.82
2.95
3.07
3.19
3.30
3.41
3.51
3.61
3.71
3.80
3.89
3.98
4.05
4.13
4.20
4.27
4.33
4.38
4.43
4.48
4.52
4.56
4.59
4.62
4.64
4.65
4.66
4.66
4.66
4.66
4.64
4.62
4.60
4.57
4.53
4.48
4.43
4.38
4.31
4.24
1.62
2.07
2.88
4.50
0.31
0.57
0.80
1.02
1.23
1.43
1.62
1.81
1.99
2.16
2.33
2.49
2.65
2.80
2.95
3.10
3.23
3.37
3.50
3.62
3.75
3.86
3.97
4.08
4.18
4.28
4.37
4.46
4.54
4.62
4.69
4.75
4.82
4.87
4.92
4.96
5.00
5.03
5.06
5.08
5.09
5.10
5.10
5.10
5.08
5.07
5.04
5.01
4.97
4.92
4.86
4.80
4.73
4.66
4.57
1.78
2.28
3.17
4.96
0.34
0.62
0.88
1.12
1.35
1.57
1.78
1.99
2.18
2.38
2.56
2.74
2.92
3.09
3.25
3.41
3.57
3.72
3.86
4.00
4.13
4.26
4.38
4.50
4.61
4.72
4.82
4.92
5.01
5.09
5.17
5.24
5.30
5.36
5.41
5.45
5.49
5.52
5.55
5.57
5.58
5.58
5.57
5.56
5.54
5.51
5.47
5.43
5.38
5.31
1.94
2.49
3.46
5.41
0.37
0.67
0.95
1.21
1.46
1.71
1.94
2.16
2.38
2.59
2.79
2.99
3.19
3.37
3.55
3.73
3.90
4.06
4.22
4.37
4.51
4.65
4.79
4.91
5.03
5.15
5.26
5.36
5.45
5.54
5.62
5.70
5.76
5.82
5.87
5.92
5.95
5.98
6.00
6.01
6.02
6.01
6.00
5.98
5.94
5.90
5.85
5.79
5.72
5.64
2.12
2.72
3.79
5.90
0.40
0.73
1.03
1.32
1.60
1.86
2.12
2.36
2.60
2.83
3.06
3.28
3.49
3.69
3.89
4.08
4.26
4.44
4.62
4.78
4.94
5.09
5.23
5.37
5.50
5.62
5.74
5.85
5.95
6.04
6.12
6.20
6.27
6.32
6.37
6.41
6.44
6.47
6.48
6.48
6.47
6.46
6.43
6.39
6.34
2.34
3.01
4.19
6.48
0.44
0.80
1.14
1.46
1.76
2.06
2.34
2.61
2.88
3.13
3.38
3.62
3.86
4.08
4.30
4.51
4.72
4.91
5.10
5.28
5.46
5.62
5.78
5.93
6.06
6.20
6.32
6.43
6.53
6.63
6.71
6.79
6.85
6.90
6.95
6.98
7.00
7.01
7.01
6.99
6.97
6.93
6.88
6.82
6.74
2.56
3.29
4.59
7.03
0.48
0.87
1.24
1.59
1.93
2.25
2.56
2.86
3.15
3.43
3.70
3.97
4.22
4.47
4.71
4.94
5.16
5.37
5.58
5.77
5.96
6.13
6.30
6.46
6.60
6.74
6.86
6.98
7.08
7.18
7.26
7.33
7.38
7.43
7.46
7.48
7.48
7.47
7.45
7.42
7.37
2.99
3.85
5.36
8.03
0.55
1.02
1.45
1.86
2.25
2.63
2.99
3.34
3.69
4.01
4.33
4.64
4.94
5.22
5.50
5.76
6.02
6.26
6.49
6.71
6.91
7.10
7.28
7.45
7.60
7.74
7.87
7.98
8.07
8.15
8.21
8.26
8.29
8.30
8.30
VB
Additional
per belt for
1,01 1,06
to
to
1,05 1,26
0.02
0.02
0.03
0.06
0.00
0.00
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.02
0.02
0.03
0.03
0.03
0.03
0.03
0.04
0.04
0.04
0.04
0.05
0.05
0.05
0.05
0.05
0.06
0.06
0.06
0.06
0.06
0.07
0.07
0.07
0.07
0.08
0.08
0.08
0.08
0.08
0.09
0.09
0.09
0.09
0.10
0.10
0.10
0.10
0.10
0.11
0.11
0.11
0.11
0.11
0.12
0.12
0.12
0.12
0.13
0.13
0.13
0.08
0.10
0.16
0.31
0.01
0.02
0.03
0.04
0.05
0.06
0.08
0.09
0.10
0.11
0.12
0.13
0.14
0.15
0.16
0.17
0.18
0.19
0.21
0.22
0.23
0.24
0.25
0.26
0.27
0.28
0.29
0.30
0.31
0.32
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.48
0.49
0.50
0.51
0.52
0.53
0.54
0.55
0.56
0.57
0.58
0.59
0.61
0.62
0.63
0.64
0.65
power (kW)
speed ratio i
1,27 >1,57
to
1,57
0.12
0.16
0.25
0.49
0.02
0.03
0.05
0.07
0.09
0.10
0.12
0.14
0.16
0.17
0.19
0.21
0.22
0.24
0.26
0.28
0.29
0.31
0.33
0.35
0.36
0.38
0.40
0.42
0.43
0.45
0.47
0.48
0.50
0.52
0.54
0.55
0.57
0.59
0.61
0.62
0.64
0.66
0.67
0.69
0.71
0.73
0.74
0.76
0.78
0.80
0.81
0.83
0.85
0.87
0.88
0.90
0.92
0.93
0.95
0.97
0.99
1.00
1.02
1.04
104
Pulleys
0.14
0.18
0.28
0.55
0.02
0.04
0.06
0.08
0.10
0.12
0.14
0.16
0.18
0.19
0.21
0.23
0.25
0.27
0.29
0.31
0.33
0.35
0.37
0.39
0.41
0.43
0.45
0.47
0.49
0.51
0.53
0.54
0.56
0.58
0.60
0.62
0.64
0.66
0.68
0.70
0.72
0.74
0.76
0.78
0.80
0.82
0.84
0.86
0.88
0.89
0.91
0.93
0.95
0.97
0.99
1.01
1.03
1.05
1.07
1.09
1.11
1.13
1.15
1.17
Power Ratings
Section B/17
Nominal Power Rating PN (kW) for = 180 and Ld = 2280 mm
Statically balanced
v (m/s)
Pulleys
Table 49
nk
(min-1)
112
125
132
140
150
160
170
180
190
200
212
224
236
250
280
700
950
1450
2850
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
1.49
1.83
2.37
2.99
0.33
0.58
0.79
0.99
1.17
1.33
1.49
1.63
1.77
1.89
2.01
2.12
2.23
2.33
2.42
2.50
2.58
2.65
2.72
2.77
2.82
2.87
2.91
2.94
2.96
2.98
2.99
2.99
2.98
2.97
2.95
2.92
2.89
2.85
2.80
2.74
2.67
2.59
2.51
2.42
2.31
2.20
2.08
1.95
1.82
1.67
1.51
1.34
1.16
0.97
1.96
2.45
3.25
4.37
0.41
0.73
1.01
1.27
1.52
1.74
1.96
2.16
2.35
2.54
2.71
2.88
3.03
3.18
3.32
3.45
3.57
3.69
3.79
3.89
3.98
4.06
4.14
4.20
4.25
4.30
4.34
4.36
4.38
4.39
4.39
4.37
4.35
4.32
4.27
4.22
4.15
4.08
3.99
3.89
3.78
3.65
3.52
3.37
3.21
3.03
2.85
2.65
2.43
2.20
2.21
2.77
3.72
5.08
0.46
0.81
1.13
1.43
1.70
1.96
2.21
2.44
2.67
2.88
3.08
3.28
3.46
3.63
3.80
3.95
4.10
4.24
4.36
4.48
4.59
4.69
4.78
4.86
4.93
4.98
5.03
5.07
5.10
5.11
5.12
5.11
5.09
5.06
5.01
4.96
4.89
4.80
4.71
4.60
4.48
4.34
4.19
4.02
3.84
3.65
3.44
3.21
2.97
2.71
2.50
3.15
4.24
5.87
0.51
0.91
1.27
1.60
1.92
2.21
2.50
2.77
3.02
3.27
3.50
3.73
3.94
4.14
4.33
4.52
4.69
4.85
5.00
5.14
5.27
5.39
5.49
5.59
5.67
5.74
5.80
5.85
5.88
5.90
5.91
5.90
5.88
5.85
5.80
5.74
5.66
5.57
5.46
5.34
5.19
5.04
4.86
4.67
4.46
2.85
3.61
4.89
6.80
0.57
1.02
1.43
1.82
2.18
2.52
2.85
3.16
3.46
3.75
4.02
4.28
4.53
4.77
5.00
5.21
5.41
5.60
5.78
5.94
6.09
6.23
6.36
6.47
6.57
6.65
6.72
6.77
6.81
6.84
6.84
6.83
6.81
6.77
6.71
6.63
6.53
6.42
6.29
6.13
5.96
5.77
5.56
5.32
5.07
3.20
4.06
5.52
7.67
0.63
1.14
1.60
2.03
2.44
2.83
3.20
3.56
3.90
4.22
4.53
4.83
5.12
5.39
5.65
5.89
6.12
6.34
6.54
6.72
6.90
7.05
7.19
7.32
7.43
7.52
7.59
7.65
7.69
7.71
7.71
7.69
7.65
7.59
7.52
7.41
7.29
7.15
6.98
6.79
3.55
4.51
6.14
8.49
0.69
1.25
1.77
2.25
2.70
3.13
3.55
3.95
4.33
4.69
5.04
5.37
5.69
6.00
6.28
6.56
6.81
7.05
7.27
7.48
7.67
7.84
7.99
8.13
8.24
8.34
8.41
8.47
8.50
8.51
8.50
8.47
8.41
8.33
8.22
8.09
7.93
7.75
7.54
7.31
3.89
4.96
6.75
9.24
0.75
1.37
1.93
2.46
2.96
3.44
3.89
4.33
4.75
5.16
5.54
5.91
6.26
6.59
6.91
7.21
7.49
7.75
7.99
8.21
8.42
8.60
8.76
8.90
9.02
9.11
9.18
9.23
9.25
9.25
9.22
9.16
9.08
8.96
8.82
4.24
5.40
7.35
9.93
0.81
1.48
2.09
2.67
3.22
3.74
4.24
4.72
5.17
5.61
6.03
6.44
6.82
7.18
7.52
7.85
8.15
8.43
8.69
8.92
9.14
9.33
9.49
9.63
9.75
9.83
9.90
9.93
9.93
9.91
9.85
9.77
9.65
9.50
9.31
4.58
5.83
7.94
10.56
0.87
1.59
2.25
2.88
3.47
4.03
4.58
5.09
5.59
6.07
6.52
6.95
7.37
7.76
8.12
8.47
8.79
9.09
9.36
9.61
9.83
10.02
10.19
10.32
10.43
10.51
10.55
10.57
10.55
10.49
10.41
10.28
10.12
9.92
9.68
4.98
6.35
8.63
11.22
0.94
1.73
2.45
3.13
3.77
4.39
4.98
5.55
6.09
6.60
7.10
7.57
8.01
8.43
8.83
9.20
9.54
9.85
10.14
10.39
10.62
10.81
10.97
11.10
11.19
11.25
11.27
11.25
11.19
11.09
5.38
6.86
9.31
11.78
1.01
1.86
2.64
3.37
4.07
4.74
5.38
5.99
6.57
7.13
7.66
8.17
8.64
9.09
9.51
9.90
10.26
10.58
10.88
11.14
11.36
11.55
11.70
11.81
11.88
11.90
11.89
11.83
11.73
11.58
5.78
7.36
9.96
12.24
1.08
1.99
2.83
3.62
4.37
5.09
5.78
6.43
7.06
7.65
8.22
8.76
9.26
9.74
10.18
10.58
10.95
11.29
11.58
11.84
12.06
12.23
12.36
12.45
12.49
12.48
12.42
12.31
12.15
11.93
6.23
7.94
10.70
12.62
1.17
2.15
3.05
3.91
4.72
5.49
6.23
6.94
7.61
8.25
8.86
9.43
9.97
10.47
10.93
11.35
11.73
12.07
12.36
12.61
12.81
12.96
13.06
13.11
13.10
7.19
9.14
12.20
12.90
1.34
2.47
3.52
4.51
5.45
6.34
7.19
8.00
8.77
9.50
10.18
10.82
11.41
11.95
12.44
12.88
13.26
13.59
13.85
14.06
14.19
14.26
14.26
14.19
14.04
VB
Additional
per belt for
1,01 1,06
to
to
1,05 1,26
0.03
0.05
0.07
0.14
0.00
0.01
0.01
0.02
0.02
0.03
0.03
0.04
0.04
0.05
0.05
0.06
0.06
0.07
0.07
0.08
0.08
0.09
0.09
0.10
0.10
0.11
0.11
0.12
0.12
0.13
0.13
0.14
0.14
0.14
0.15
0.15
0.16
0.16
0.17
0.17
0.18
0.18
0.19
0.19
0.20
0.20
0.21
0.21
0.22
0.22
0.23
0.23
0.24
0.24
0.17
0.23
0.35
0.69
0.02
0.05
0.07
0.10
0.12
0.14
0.17
0.19
0.22
0.24
0.27
0.29
0.31
0.34
0.36
0.39
0.41
0.43
0.46
0.48
0.51
0.53
0.56
0.58
0.60
0.63
0.65
0.68
0.70
0.72
0.75
0.77
0.80
0.82
0.84
0.87
0.89
0.92
0.94
0.97
0.99
1.01
1.04
1.06
1.09
1.11
1.13
1.16
1.18
1.21
power (kW)
speed ratio i
1,27 >1,57
to
1,57
0.27
0.37
0.56
1.10
0.04
0.08
0.12
0.15
0.19
0.23
0.27
0.31
0.35
0.39
0.42
0.46
0.50
0.54
0.58
0.62
0.66
0.70
0.73
0.77
0.81
0.85
0.89
0.93
0.97
1.00
1.04
1.08
1.12
1.16
1.20
1.24
1.27
1.31
1.35
1.39
1.43
1.47
1.51
1.55
1.58
1.62
1.66
1.70
1.74
1.78
1.82
1.85
1.89
1.93
0.30
0.41
0.63
1.24
0.04
0.09
0.13
0.17
0.22
0.26
0.30
0.35
0.39
0.43
0.48
0.52
0.56
0.61
0.65
0.69
0.74
0.78
0.82
0.87
0.91
0.96
1.00
1.04
1.09
1.13
1.17
1.22
1.26
1.30
1.35
1.39
1.43
1.48
1.52
1.56
1.61
1.65
1.69
1.74
1.78
1.82
1.87
1.91
1.95
2.00
2.04
2.08
2.13
2.17
Pulleys
105
Power Ratings
Section 20
Nominal Power Rating PN (kW) for = 180 and Ld = 3198 mm
Statically balanced
v (m/s)
Pulleys
Table 50
nk
(min-1)
140
160
180
200
224
236
250
280
315
355
700
950
1450
2850
50
100
150
200
250
300
350
400
450
500
550
600
650
700
750
800
850
900
950
1000
1050
1100
1150
1200
1250
1300
1350
1400
1450
1500
1550
1600
1650
1700
1750
1800
1850
1900
1950
2000
2050
2100
2150
2200
2250
2300
2350
2400
2450
2500
2550
2600
2650
2700
2750
2800
2850
2900
2950
3000
2.62
3.21
4.08
4.64
0.34
0.60
0.82
1.04
1.23
1.42
1.59
1.76
1.92
2.07
2.22
2.36
2.49
2.62
2.75
2.87
2.99
3.10
3.21
3.31
3.41
3.51
3.60
3.69
3.78
3.86
3.94
4.01
4.08
4.15
4.22
4.28
4.34
4.39
4.44
4.49
4.53
4.57
4.61
4.64
4.67
4.70
4.72
4.74
4.75
4.76
4.77
4.77
4.77
4.77
4.76
4.75
4.74
4.72
4.69
4.67
4.64
4.60
4.56
4.52
3.33
4.11
5.30
6.11
0.41
0.73
1.02
1.28
1.53
1.76
1.99
2.20
2.41
2.61
2.80
2.98
3.16
3.33
3.50
3.66
3.81
3.96
4.11
4.25
4.39
4.52
4.64
4.76
4.88
4.99
5.10
5.20
5.30
5.40
5.49
5.57
5.65
5.73
5.80
5.87
5.93
5.98
6.04
6.08
6.13
6.16
6.20
6.22
6.25
6.27
6.28
6.29
6.29
6.28
6.28
6.26
6.24
6.22
6.19
6.15
6.11
6.06
6.01
5.95
4.02
4.99
6.46
7.29
0.48
0.86
1.20
1.52
1.82
2.11
2.38
2.64
2.89
3.13
3.37
3.59
3.81
4.02
4.23
4.43
4.62
4.81
4.99
5.16
5.33
5.49
5.65
5.80
5.94
6.08
6.21
6.34
6.46
6.58
6.69
6.79
6.89
6.98
7.07
7.15
7.22
7.29
7.35
7.41
7.45
7.50
7.53
7.56
7.58
7.60
7.61
7.61
7.60
7.59
7.57
7.54
7.51
7.47
7.42
7.36
7.29
7.22
7.14
7.05
4.70
5.83
7.56
8.16
0.55
0.99
1.39
1.76
2.11
2.44
2.76
3.07
3.37
3.65
3.93
4.19
4.45
4.70
4.94
5.18
5.40
5.62
5.83
6.04
6.24
6.43
6.61
6.79
6.96
7.12
7.27
7.42
7.56
7.69
7.82
7.94
8.05
8.15
8.24
8.33
8.41
8.48
8.55
8.60
8.65
8.69
8.71
8.74
8.75
8.75
8.75
8.73
8.71
8.67
8.63
8.58
8.51
8.44
8.36
8.27
8.16
8.05
7.93
7.79
5.49
6.82
8.80
8.75
0.63
1.15
1.61
2.04
2.45
2.84
3.22
3.58
3.92
4.26
4.58
4.90
5.20
5.49
5.78
6.05
6.32
6.57
6.82
7.06
7.29
7.51
7.72
7.92
8.11
8.30
8.47
8.64
8.80
8.94
9.08
9.21
9.33
9.43
9.53
9.62
9.69
9.76
9.81
9.86
9.89
9.91
9.92
9.92
9.91
9.88
9.84
9.79
9.73
9.66
9.57
9.47
9.35
9.22
9.08
8.92
8.75
8.57
8.37
8.16
5.88
7.30
9.38
8.85
0.68
1.22
1.72
2.18
2.62
3.04
3.44
3.83
4.20
4.56
4.90
5.24
5.56
5.88
6.18
6.48
6.76
7.03
7.30
7.55
7.79
8.03
8.25
8.47
8.67
8.86
9.05
9.22
9.38
9.53
9.67
9.80
9.92
10.02
10.12
10.20
10.27
10.33
10.38
10.41
10.43
10.44
10.43
10.41
10.38
10.34
10.28
10.20
10.11
10.01
9.89
9.76
9.61
9.44
9.26
6.32
7.84
10.03
8.79
0.72
1.31
1.84
2.34
2.82
3.27
3.70
4.11
4.51
4.90
5.28
5.64
5.99
6.32
6.65
6.97
7.27
7.56
7.84
8.11
8.37
8.62
8.86
9.08
9.30
9.50
9.69
9.87
10.03
10.18
10.33
10.45
10.57
10.67
10.76
10.83
10.89
10.94
10.97
10.99
10.99
10.98
10.95
10.91
10.85
10.77
10.68
10.57
10.44
10.30
7.25
8.97
11.32
7.99
0.83
1.50
2.11
2.68
3.23
3.75
4.24
4.72
5.18
5.63
6.06
6.47
6.87
7.25
7.63
7.98
8.33
8.66
8.97
9.27
9.56
9.83
10.09
10.33
10.56
10.77
10.97
11.15
11.32
11.46
11.60
11.71
11.81
11.89
11.95
11.99
12.02
12.02
12.01
11.97
11.92
11.84
11.75
11.63
11.49
11.33
11.14
10.94
10.71
10.45
8.30
10.21
12.61
5.78
0.94
1.71
2.42
3.07
3.70
4.29
4.87
5.41
5.94
6.45
6.94
7.41
7.86
8.30
8.72
9.12
9.50
9.87
10.21
10.54
10.85
11.14
11.41
11.66
11.90
12.11
12.30
12.47
12.61
12.74
12.84
12.92
12.97
13.00
13.01
12.99
12.94
12.87
12.77
12.65
12.49
12.31
12.10
11.86
11.59
9.44
11.53
13.81
1.08
1.96
2.76
3.51
4.23
4.91
5.56
6.19
6.79
7.36
7.92
8.45
8.96
9.44
9.91
10.35
10.77
11.16
11.53
11.88
12.20
12.50
12.77
13.01
13.23
13.42
13.58
13.71
13.81
13.88
13.92
13.93
13.90
13.84
13.75
13.62
13.46
13.26
13.02
12.74
VB
Additional
per belt for
1,01 1,06
to
to
1,05 1,26
0.04
0.05
0.07
0.15
0.00
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.02
0.03
0.03
0.03
0.03
0.04
0.04
0.04
0.04
0.05
0.05
0.05
0.05
0.06
0.06
0.06
0.06
0.07
0.07
0.07
0.07
0.08
0.08
0.08
0.08
0.09
0.09
0.09
0.09
0.10
0.10
0.10
0.11
0.11
0.11
0.11
0.12
0.12
0.12
0.12
0.13
0.13
0.13
0.13
0.14
0.14
0.14
0.14
0.15
0.15
0.15
0.15
0.18
0.24
0.37
0.73
0.01
0.03
0.04
0.05
0.06
0.08
0.09
0.10
0.12
0.13
0.14
0.15
0.17
0.18
0.19
0.21
0.22
0.23
0.24
0.26
0.27
0.28
0.29
0.31
0.32
0.33
0.35
0.36
0.37
0.38
0.40
0.41
0.42
0.44
0.45
0.46
0.47
0.49
0.50
0.51
0.53
0.54
0.55
0.56
0.58
0.59
0.60
0.62
0.63
0.64
0.65
0.67
0.68
0.69
0.71
0.72
0.73
0.74
0.76
0.77
power (kW)
speed ratio i
1,27 >1,57
to
1,57
0.29
0.39
0.59
1.17
0.02
0.04
0.06
0.08
0.10
0.12
0.14
0.16
0.18
0.21
0.23
0.25
0.27
0.29
0.31
0.33
0.35
0.37
0.39
0.41
0.43
0.45
0.47
0.49
0.51
0.53
0.55
0.57
0.59
0.62
0.64
0.66
0.68
0.70
0.72
0.74
0.76
0.78
0.80
0.82
0.84
0.86
0.88
0.90
0.92
0.94
0.96
0.98
1.01
1.03
1.05
1.07
1.09
1.11
1.13
1.15
1.17
1.19
1.21
1.23
106
Pulleys
0.32
0.44
0.67
1.31
0.02
0.05
0.07
0.09
0.12
0.14
0.16
0.18
0.21
0.23
0.25
0.28
0.30
0.32
0.35
0.37
0.39
0.42
0.44
0.46
0.48
0.51
0.53
0.55
0.58
0.60
0.62
0.65
0.67
0.69
0.71
0.74
0.76
0.78
0.81
0.83
0.85
0.88
0.90
0.92
0.95
0.97
0.99
1.01
1.04
1.06
1.08
1.11
1.13
1.15
1.18
1.20
1.22
1.25
1.27
1.29
1.31
1.34
1.36
1.38
Power Ratings
Section C/22
Nominal Power Rating PN (kW) for = 180 and Ld = 3808 mm
Statically balanced
v (m/s)
Pulleys
Table 51
nk
(min-1)
180
200
212
224
236
250
265
280
300
315
700
950
1450
2850
50
100
150
200
250
300
350
400
450
500
550
600
650
700
750
800
850
900
950
1000
1050
1100
1150
1200
1250
1300
1350
1400
1450
1500
1550
1600
1650
1700
1750
1800
1850
1900
1950
2000
2050
2100
2150
2200
2250
2300
2350
2400
2450
2500
2550
2600
2650
2700
2750
2800
2850
2900
2950
3000
3050
3100
3150
3200
3250
4.51
5.60
7.23
7.54
0.53
0.95
1.34
1.69
2.03
2.35
2.66
2.95
3.23
3.51
3.77
4.03
4.27
4.51
4.74
4.97
5.18
5.39
5.60
5.79
5.98
6.16
6.33
6.50
6.66
6.81
6.96
7.09
7.23
7.35
7.46
7.57
7.67
7.77
7.85
7.93
8.00
8.06
8.12
8.16
8.20
8.23
8.25
8.26
8.26
8.25
8.24
8.21
8.18
8.13
8.08
8.01
7.94
7.86
7.76
7.66
7.54
7.42
7.28
7.14
6.98
6.81
6.63
6.44
6.24
5.66
7.08
9.24
9.81
0.64
1.16
1.63
2.07
2.49
2.90
3.28
3.66
4.02
4.37
4.71
5.04
5.36
5.66
5.97
6.26
6.54
6.81
7.08
7.33
7.58
7.82
8.05
8.27
8.48
8.69
8.88
9.07
9.24
9.41
9.57
9.71
9.85
9.98
10.10
10.20
10.30
10.39
10.46
10.53
10.58
10.63
10.66
10.68
10.69
10.68
10.67
10.64
10.60
10.55
10.48
10.40
10.31
10.20
10.08
9.95
9.81
9.64
9.47
9.28
9.08
8.86
8.62
8.37
8.11
6.35
7.95
10.42
10.94
0.70
1.28
1.80
2.30
2.77
3.22
3.66
4.08
4.48
4.88
5.26
5.63
6.00
6.35
6.69
7.02
7.34
7.65
7.95
8.24
8.52
8.80
9.06
9.31
9.55
9.78
10.00
10.22
10.42
10.60
10.78
10.95
11.11
11.25
11.38
11.50
11.61
11.71
11.79
11.87
11.92
11.97
12.00
12.02
12.03
12.02
12.00
11.96
11.91
11.84
11.76
11.66
11.55
11.42
11.28
11.12
10.94
10.75
10.54
10.31
7.02
8.81
11.56
11.91
0.76
1.39
1.97
2.52
3.04
3.54
4.03
4.49
4.95
5.39
5.81
6.23
6.63
7.02
7.40
7.77
8.13
8.48
8.81
9.14
9.45
9.76
10.05
10.33
10.60
10.86
11.10
11.34
11.56
11.77
11.97
12.15
12.32
12.48
12.62
12.75
12.87
12.97
13.06
13.14
13.20
13.24
13.27
13.28
13.28
13.26
13.23
13.17
13.10
13.02
12.91
12.79
12.65
12.49
12.32
12.12
11.91
11.67
11.42
11.15
7.69
9.67
12.67
12.69
0.83
1.51
2.15
2.75
3.32
3.87
4.40
4.91
5.41
5.89
6.36
6.82
7.26
7.69
8.11
8.52
8.91
9.29
9.67
10.02
10.37
10.70
11.02
11.33
11.63
11.91
12.18
12.43
12.67
12.90
13.11
13.31
13.49
13.66
13.82
13.95
14.07
14.18
14.27
14.34
14.40
14.43
14.45
14.45
14.44
14.40
14.35
14.27
14.18
14.07
13.94
13.78
13.61
13.41
13.19
8.47
10.64
13.93
13.37
0.90
1.65
2.35
3.00
3.63
4.24
4.82
5.39
5.94
6.47
6.99
7.50
7.99
8.47
8.93
9.38
9.81
10.24
10.64
11.04
11.42
11.79
12.14
12.47
12.80
13.10
13.40
13.67
13.93
14.18
14.41
14.62
14.81
14.99
15.14
15.28
15.41
15.51
15.59
15.65
15.70
15.72
15.72
15.71
15.67
15.60
15.52
15.41
15.28
15.13
9.28
11.67
15.24
13.79
0.98
1.80
2.56
3.28
3.97
4.64
5.28
5.90
6.51
7.09
7.67
8.22
8.76
9.28
9.79
10.29
10.76
11.23
11.67
12.11
12.52
12.92
13.30
13.67
14.02
14.35
14.66
14.96
15.24
15.50
15.73
15.95
16.15
16.33
16.49
16.63
16.74
16.83
16.90
16.95
16.97
16.97
16.95
16.90
16.83
16.73
16.60
16.45
16.26
16.06
10.09
12.69
16.49
13.88
1.06
1.95
2.77
3.55
4.31
5.03
5.73
6.41
7.07
7.71
8.33
8.94
9.52
10.09
10.65
11.18
11.70
12.20
12.69
13.15
13.60
14.03
14.44
14.83
15.21
15.56
15.89
16.20
16.49
16.76
17.00
17.23
17.42
17.60
17.75
17.88
17.98
18.06
18.10
18.13
18.12
18.09
18.03
17.94
17.82
11.16
14.01
18.08
13.47
1.16
2.14
3.05
3.92
4.75
5.55
6.33
7.08
7.81
8.52
9.21
9.88
10.53
11.16
11.77
12.36
12.93
13.48
14.01
14.52
15.01
15.47
15.91
16.34
16.73
17.11
17.46
17.78
18.08
18.35
18.60
18.81
19.00
19.17
19.30
19.40
19.47
19.51
19.52
19.50
19.44
19.35
19.23
19.07
18.87
11.94
14.98
19.20
12.74
1.24
2.28
3.26
4.19
5.08
5.94
6.77
7.58
8.36
9.12
9.86
10.58
11.27
11.94
12.60
13.23
13.83
14.42
14.98
15.52
16.03
16.52
16.98
17.42
17.83
18.22
18.58
18.91
19.20
19.47
19.71
19.92
20.10
20.24
20.35
20.43
20.47
20.47
20.44
20.37
335
355
375
400
450
1.44
2.67
3.81
4.91
5.95
6.97
7.94
8.89
9.81
10.70
11.57
12.41
13.21
14.00
14.75
15.47
16.17
16.83
17.47
18.07
18.64
19.18
19.68
20.15
20.58
20.98
21.33
21.65
21.93
22.16
22.36
22.51
22.61
22.67
22.69
22.65
22.57
22.44
22.25
22.02
1.54
2.86
4.09
5.26
6.39
7.47
8.52
9.54
10.53
11.48
12.41
13.30
14.16
15.00
15.80
16.56
17.30
18.00
18.66
19.29
19.88
20.43
20.94
21.42
21.85
22.23
22.58
22.87
23.13
23.33
23.48
23.59
23.64
23.64
23.58
1.67
3.09
4.43
5.70
6.92
8.10
9.24
10.34
11.41
12.44
13.44
14.40
15.33
16.22
17.07
17.89
18.67
19.40
20.10
20.75
21.36
21.92
22.43
22.90
23.32
23.69
24.00
24.26
24.46
24.61
24.70
24.72
24.69
24.59
24.42
1.92
3.56
5.10
6.57
7.98
9.34
10.66
11.92
13.14
14.32
15.46
16.55
17.59
18.58
19.53
20.42
21.27
22.05
22.79
23.46
24.07
24.62
25.11
25.53
25.88
26.17
26.37
26.51
26.56
26.54
26.43
26.24
25.96
25.59
25.13
VB
Additional
per belt for
1,01 1,06
to
to
1,05 1,26
power (kW)
speed ratio i
1,27 >1,57
to
1,57
0.71
0.97
1.48
2.90
0.05
0.10
0.15
0.20
0.25
0.31
0.36
0.41
0.46
0.51
0.56
0.61
0.66
0.71
0.76
0.81
0.87
0.92
0.97
1.02
1.07
1.12
1.17
1.22
1.27
1.32
1.37
1.42
1.48
1.53
1.58
1.63
1.68
1.73
1.78
1.83
1.88
1.93
1.98
2.04
2.09
2.14
2.19
2.24
2.29
2.34
2.39
2.44
2.49
2.54
2.60
2.65
2.70
2.75
2.80
2.85
2.90
2.95
3.00
3.05
3.10
3.15
3.21
3.26
3.31
Pulleys
107
Power Ratings
Section 25
Nominal Power Rating PN (kW) for = 180 and Ld = 4561 mm
Statically balanced
v (m/s)
Pulleys
Table 52
nk
(min-1)
224
236
250
280
315
355
400
450
500
560
700
950
1450
2850
50
100
150
200
250
300
350
400
450
500
550
600
650
700
750
800
850
900
950
1000
1050
1100
1150
1200
1250
1300
1350
1400
1450
1500
1550
1600
1650
1700
1750
1800
1850
1900
1950
2000
2050
2100
2150
2200
2250
2300
2350
2400
2450
2500
5.68
6.86
8.15
2.14
0.71
1.26
1.76
2.22
2.65
3.06
3.44
3.81
4.16
4.49
4.81
5.12
5.41
5.68
5.95
6.20
6.43
6.65
6.86
7.06
7.24
7.40
7.55
7.69
7.81
7.92
8.02
8.09
8.15
8.20
8.23
8.24
8.24
8.22
8.18
8.12
8.04
7.95
7.84
7.70
7.55
7.38
7.19
6.97
6.74
6.48
6.21
5.91
5.58
5.24
6.47
7.86
9.43
2.79
0.78
1.40
1.96
2.48
2.97
3.43
3.88
4.30
4.70
5.09
5.45
5.81
6.15
6.47
6.78
7.07
7.35
7.61
7.86
8.09
8.30
8.50
8.69
8.85
9.00
9.14
9.25
9.35
9.43
9.50
9.54
9.57
9.57
9.56
9.52
9.47
9.39
9.29
9.17
9.03
8.87
8.68
8.47
8.23
7.97
7.69
7.38
7.04
6.68
6.29
7.38
9.00
10.88
3.23
0.87
1.56
2.20
2.79
3.34
3.87
4.38
4.86
5.33
5.77
6.20
6.61
7.00
7.38
7.73
8.08
8.40
8.71
9.00
9.27
9.52
9.76
9.98
10.18
10.36
10.52
10.66
10.78
10.88
10.96
11.01
11.05
11.06
11.04
11.01
10.95
10.87
10.76
10.62
10.46
10.27
10.06
9.82
9.55
9.25
8.92
8.56
8.17
7.75
7.30
9.28
11.38
13.78
2.91
1.05
1.91
2.69
3.43
4.13
4.80
5.44
6.06
6.65
7.22
7.77
8.29
8.80
9.28
9.75
10.19
10.61
11.00
11.38
11.73
12.06
12.36
12.64
12.90
13.13
13.33
13.51
13.66
13.78
13.87
13.93
13.97
13.97
13.94
13.88
13.79
13.66
13.50
13.30
13.07
12.80
12.49
12.15
11.76
11.34
11.45
14.03
16.81
0.19
1.26
2.31
3.27
4.18
5.04
5.87
6.67
7.43
8.17
8.88
9.56
10.22
10.85
11.45
12.02
12.57
13.09
13.57
14.03
14.46
14.86
15.22
15.56
15.86
16.12
16.35
16.54
16.69
16.81
16.89
16.92
16.92
16.87
16.78
16.64
16.46
16.23
15.95
15.63
15.25
13.84
16.90
19.77
16.43
19.91
22.40
19.16
22.94
24.36
21.74
25.63
25.21
24.62
28.37
24.60
1.50
2.76
3.92
5.02
6.07
7.08
8.05
8.98
9.87
10.74
11.56
12.36
13.12
13.84
14.53
15.18
15.79
16.37
16.90
17.40
17.85
18.26
18.62
18.93
19.20
19.42
19.59
19.71
19.77
19.78
19.73
19.63
19.46
19.24
18.95
1.76
3.26
4.64
5.96
7.21
8.41
9.57
10.68
11.75
12.77
13.75
14.69
15.58
16.43
17.22
17.97
18.67
19.31
19.91
20.44
20.92
21.33
21.69
21.98
22.20
22.36
22.45
22.46
22.40
22.26
2.06
3.81
5.44
6.98
8.46
9.87
11.23
12.53
13.78
14.97
16.11
17.18
18.20
19.16
20.05
20.88
21.64
22.33
22.94
23.48
23.93
24.31
24.60
24.80
24.90
24.92
24.83
24.65
24.36
23.96
2.35
4.35
6.22
7.99
9.69
11.30
12.86
14.34
15.75
17.10
18.37
19.57
20.70
21.74
22.70
23.57
24.35
25.04
25.63
26.12
26.50
26.77
26.92
26.96
26.87
2.69
5.00
7.15
9.19
11.14
12.99
14.76
16.45
18.05
19.56
20.97
22.29
23.51
24.62
25.61
26.49
27.25
27.88
28.37
28.72
28.93
28.99
28.88
28.62
28.18
VB
Additional
per belt for
1,01 1,06
to
to
1,05 1,26
0.12
0.16
0.25
0.49
0.01
0.02
0.03
0.03
0.04
0.05
0.06
0.07
0.08
0.09
0.10
0.10
0.11
0.12
0.13
0.14
0.15
0.16
0.16
0.17
0.18
0.19
0.20
0.21
0.22
0.23
0.23
0.24
0.25
0.26
0.27
0.28
0.29
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.42
0.43
0.61
0.82
1.26
2.47
0.04
0.09
0.13
0.17
0.22
0.26
0.30
0.35
0.39
0.43
0.48
0.52
0.56
0.61
0.65
0.69
0.74
0.78
0.82
0.87
0.91
0.95
1.00
1.04
1.08
1.13
1.17
1.21
1.26
1.30
1.34
1.39
1.43
1.47
1.52
1.56
1.60
1.65
1.69
1.73
1.78
1.82
1.86
1.91
1.95
1.99
2.04
2.08
2.12
2.17
power (kW)
speed ratio i
1,27 >1,57
to
1,57
0.97
1.32
2.01
3.95
0.07
0.14
0.21
0.28
0.35
0.42
0.49
0.55
0.62
0.69
0.76
0.83
0.90
0.97
1.04
1.11
1.18
1.25
1.32
1.39
1.46
1.53
1.60
1.66
1.73
1.80
1.87
1.94
2.01
2.08
2.15
2.22
2.29
2.36
2.43
2.50
2.57
2.64
2.70
2.77
2.84
2.91
2.98
3.05
3.12
3.19
3.26
3.33
3.40
3.47
108
Pulleys
1.09
1.48
2.26
4.44
0.08
0.16
0.23
0.31
0.39
0.47
0.55
0.62
0.70
0.78
0.86
0.94
1.01
1.09
1.17
1.25
1.33
1.40
1.48
1.56
1.64
1.72
1.79
1.87
1.95
2.03
2.10
2.18
2.26
2.34
2.42
2.49
2.57
2.65
2.73
2.81
2.88
2.96
3.04
3.12
3.20
3.27
3.35
3.43
3.51
3.59
3.66
3.74
3.82
3.90
Power Ratings
Section D/32
Nominal Power Rating PN (kW) for = 180 and Ld = 6375 mm
Statically balanced
v (m/s)
Pulleys
Table 53
nk
(min-1)
315
355
375
400
425
450
500
560
630
670
710
750
800
900
700
950
1450
20
40
60
80
100
120
140
160
180
200
220
240
260
280
300
320
340
360
380
400
420
440
460
480
500
520
540
560
580
600
620
640
660
680
700
720
740
760
780
800
820
840
860
880
900
920
940
960
980
1000
1020
1040
1060
1080
1100
1120
1140
1160
1180
1200
1220
1240
1260
1280
1300
1320
1340
1360
1380
1400
15.30
18.50
21.43
0.80
1.46
2.08
2.66
3.22
3.76
4.28
4.79
5.29
5.77
6.24
6.70
7.16
7.60
8.04
8.47
8.89
9.30
9.71
10.11
10.50
10.88
11.26
11.63
12.00
12.36
12.71
13.06
13.40
13.73
14.06
14.38
14.69
15.00
15.30
15.59
15.88
16.16
16.44
16.71
16.97
17.22
17.47
17.71
17.95
18.18
18.40
18.61
18.82
19.02
19.21
19.39
19.57
19.74
19.90
20.06
20.20
20.34
20.47
20.60
20.71
20.82
20.92
21.01
21.09
21.16
21.23
21.29
21.34
21.37
19.17
23.20
26.56
0.96
1.77
2.53
3.25
3.94
4.61
5.26
5.89
6.51
7.11
7.71
8.29
8.86
9.42
9.97
10.51
11.04
11.56
12.07
12.58
13.08
13.56
14.04
14.52
14.98
15.44
15.88
16.32
16.75
17.18
17.59
18.00
18.40
18.79
19.17
19.54
19.90
20.26
20.61
20.95
21.28
21.60
21.91
22.21
22.51
22.79
23.07
23.33
23.59
23.83
24.07
24.30
24.51
24.72
24.92
25.10
25.28
25.44
25.59
25.74
25.87
25.99
26.10
26.20
26.28
26.36
26.42
26.47
26.51
26.54
21.05
25.45
28.81
1.04
1.93
2.75
3.54
4.29
5.03
5.74
6.43
7.11
7.78
8.43
9.07
9.70
10.31
10.92
11.51
12.10
12.68
13.24
13.80
14.35
14.89
15.41
15.93
16.45
16.95
17.44
17.92
18.40
18.86
19.32
19.77
20.20
20.63
21.05
21.46
21.86
22.25
22.63
23.00
23.36
23.71
24.05
24.38
24.70
25.00
25.30
25.59
25.86
26.13
26.38
26.62
26.85
27.07
27.27
27.47
27.65
27.82
27.98
28.12
28.25
28.37
28.48
28.57
28.65
28.72
28.77
28.81
28.83
28.84
23.36
28.15
31.31
1.14
2.12
3.03
3.90
4.74
5.55
6.34
7.11
7.87
8.61
9.33
10.04
10.74
11.43
12.10
12.77
13.42
14.06
14.69
15.31
15.92
16.52
17.11
17.69
18.25
18.81
19.36
19.90
20.42
20.94
21.45
21.94
22.43
22.90
23.36
23.81
24.25
24.68
25.10
25.50
25.90
26.28
26.65
27.00
27.35
27.68
28.00
28.31
28.60
28.88
29.15
29.40
29.64
29.87
30.08
30.28
30.46
30.63
30.78
30.92
31.04
31.15
31.24
31.32
31.38
31.43
31.45
31.47
31.46
31.44
25.62
30.75
33.45
1.24
2.31
3.31
4.26
5.18
6.07
6.94
7.78
8.61
9.43
10.22
11.01
11.78
12.53
13.27
14.00
14.72
15.43
16.12
16.80
17.47
18.13
18.78
19.42
20.04
20.65
21.25
21.84
22.42
22.98
23.53
24.07
24.60
25.11
25.62
26.11
26.58
27.04
27.49
27.93
28.35
28.76
29.16
29.54
29.90
30.25
30.59
30.91
31.21
31.50
31.78
32.04
32.28
32.50
32.71
32.91
33.08
33.24
33.38
33.50
33.61
33.69
33.76
33.81
33.84
33.86
33.85
33.82
33.78
33.71
27.82
33.23
35.22
1.34
2.50
3.58
4.61
5.61
6.58
7.53
8.45
9.36
10.24
11.11
11.97
12.80
13.63
14.44
15.23
16.01
16.78
17.54
18.28
19.01
19.73
20.43
21.12
21.80
22.46
23.11
23.75
24.37
24.98
25.58
26.16
26.73
27.28
27.82
28.34
28.85
29.34
29.82
30.28
30.73
31.16
31.57
31.97
32.35
32.71
33.06
33.39
33.70
33.99
34.26
34.52
34.76
34.97
35.17
35.35
35.51
35.65
35.77
35.86
35.94
35.99
36.03
36.04
36.03
36.00
35.94
35.86
35.76
35.64
32.05
37.80
37.54
1.54
2.87
4.13
5.32
6.48
7.61
8.71
9.78
10.83
11.86
12.87
13.86
14.84
15.79
16.73
17.66
18.56
19.46
20.33
21.19
22.03
22.86
23.67
24.46
25.24
26.00
26.74
27.47
28.18
28.87
29.54
30.20
30.83
31.45
32.05
32.63
33.19
33.73
34.25
34.75
35.23
35.68
36.12
36.53
36.92
37.29
37.64
37.96
38.26
38.53
38.78
39.01
39.21
39.38
39.53
39.66
39.75
39.82
39.86
39.87
39.86
39.82
39.74
39.64
39.51
36.82
42.59
38.01
1.78
3.32
4.77
6.17
7.51
8.82
10.10
11.35
12.57
13.77
14.95
16.10
17.24
18.35
19.44
20.51
21.56
22.59
23.60
24.59
25.56
26.51
27.44
28.34
29.23
30.09
30.93
31.75
32.55
33.32
34.07
34.79
35.49
36.17
36.82
37.44
38.04
38.61
39.15
39.66
40.15
40.61
41.04
41.44
41.81
42.14
42.45
42.72
42.97
43.18
43.35
43.49
43.60
43.67
43.71
43.71
43.67
43.60
43.49
43.34
41.91
47.12
35.03
2.05
3.84
5.52
7.14
8.70
10.23
11.71
13.16
14.58
15.97
17.34
18.68
19.99
21.27
22.53
23.77
24.97
26.16
27.31
28.44
29.55
30.62
31.67
32.69
33.69
34.65
35.58
36.49
37.36
38.20
39.01
39.79
40.53
41.24
41.91
42.55
43.16
43.72
44.25
44.74
45.19
45.60
45.97
46.30
46.59
46.84
47.04
47.19
47.31
47.37
47.39
47.36
47.29
47.16
46.99
44.59
49.16
47.08
50.77
49.38
51.93
51.98
52.71
56.17
51.90
2.21
4.13
5.95
7.69
9.38
11.02
12.62
14.19
15.72
17.22
18.69
20.12
21.53
22.91
24.27
25.59
26.88
28.15
29.38
30.59
31.76
32.90
34.01
35.09
36.13
37.14
38.12
39.06
39.96
40.83
41.66
42.45
43.20
43.92
44.59
45.22
45.80
46.35
46.84
47.30
47.70
48.06
48.38
48.64
48.85
49.01
49.12
49.18
49.18
49.13
2.36
4.42
6.37
8.24
10.05
11.81
13.52
15.20
16.84
18.45
20.02
21.56
23.06
24.54
25.98
27.39
28.76
30.10
31.41
32.68
33.92
35.12
36.29
37.41
38.50
39.55
40.56
41.53
42.46
43.34
44.18
44.98
45.72
46.43
47.08
47.68
48.24
48.74
49.19
49.59
49.94
50.22
50.46
50.63
50.74
2.51
4.71
6.79
8.78
10.71
12.59
14.42
16.21
17.96
19.67
21.34
22.98
24.58
26.14
27.67
29.16
30.61
32.02
33.40
34.74
36.03
37.29
38.50
39.67
40.80
41.88
42.91
43.90
44.84
45.73
46.56
47.35
48.08
48.76
49.38
49.95
50.45
50.90
51.29
51.61
51.87
52.07
52.20
52.26
52.25
2.71
5.07
7.31
9.46
11.54
13.56
15.53
17.46
19.34
21.18
22.97
24.73
26.44
28.11
29.74
31.33
32.87
34.37
35.83
37.24
38.60
39.91
41.18
42.39
43.55
44.66
45.71
46.71
47.64
48.52
49.34
50.10
50.79
51.42
51.98
52.47
52.89
53.24
53.52
53.73
3.08
5.79
8.34
10.80
13.18
15.49
17.73
19.93
22.06
24.15
26.18
28.16
30.09
31.96
33.78
35.55
37.26
38.90
40.49
42.02
43.48
44.88
46.21
47.47
48.66
49.78
50.82
51.78
52.67
53.47
54.19
54.82
55.36
55.81
56.17
56.44
56.61
56.67
56.64
56.50
VB
Additional
per belt for
1,01 1,06
to
to
1,05 1,26
0.23
0.31
0.47
0.01
0.01
0.02
0.03
0.03
0.04
0.05
0.05
0.06
0.06
0.07
0.08
0.08
0.09
0.10
0.10
0.11
0.12
0.12
0.13
0.14
0.14
0.15
0.16
0.16
0.17
0.18
0.18
0.19
0.19
0.20
0.21
0.21
0.22
0.23
0.23
0.24
0.25
0.25
0.26
0.27
0.27
0.28
0.29
0.29
0.30
0.31
0.31
0.32
0.32
0.33
0.34
0.34
0.35
0.36
0.36
0.37
0.38
0.38
0.39
0.40
0.40
0.41
0.42
0.42
0.43
0.44
0.44
0.45
0.45
1.14
1.54
2.36
0.03
0.06
0.10
0.13
0.16
0.19
0.23
0.26
0.29
0.32
0.36
0.39
0.42
0.45
0.49
0.52
0.55
0.58
0.62
0.65
0.68
0.71
0.75
0.78
0.81
0.84
0.88
0.91
0.94
0.97
1.01
1.04
1.07
1.10
1.14
1.17
1.20
1.23
1.27
1.30
1.33
1.36
1.40
1.43
1.46
1.49
1.53
1.56
1.59
1.62
1.66
1.69
1.72
1.75
1.79
1.82
1.85
1.88
1.92
1.95
1.98
2.01
2.05
2.08
2.11
2.14
2.18
2.21
2.24
2.27
power (kW)
speed ratio i
1,27 >1,57
to
1,57
1.82
2.47
3.77
0.05
0.10
0.16
0.21
0.26
0.31
0.36
0.42
0.47
0.52
0.57
0.62
0.68
0.73
0.78
0.83
0.88
0.94
0.99
1.04
1.09
1.14
1.20
1.25
1.30
1.35
1.40
1.46
1.51
1.56
1.61
1.66
1.72
1.77
1.82
1.87
1.92
1.98
2.03
2.08
2.13
2.18
2.24
2.29
2.34
2.39
2.44
2.50
2.55
2.60
2.65
2.70
2.76
2.81
2.86
2.91
2.96
3.02
3.07
3.12
3.17
3.22
3.28
3.33
3.38
3.43
3.48
3.53
3.59
3.64
2.05
2.78
4.24
0.06
0.12
0.18
0.23
0.29
0.35
0.41
0.47
0.53
0.58
0.64
0.70
0.76
0.82
0.88
0.94
0.99
1.05
1.11
1.17
1.23
1.29
1.34
1.40
1.46
1.52
1.58
1.64
1.69
1.75
1.81
1.87
1.93
1.99
2.05
2.10
2.16
2.22
2.28
2.34
2.40
2.45
2.51
2.57
2.63
2.69
2.75
2.81
2.86
2.92
2.98
3.04
3.10
3.16
3.21
3.27
3.33
3.39
3.45
3.51
3.56
3.62
3.68
3.74
3.80
3.86
3.92
3.97
4.03
4.09
v (m/s)
Dynamically balanced (for details see DIN 2211)
Pulleys
109
Power Ratings
Section E/40
Nominal Power Rating PN (kW) for = 180 and Ld = 7180 mm
Statically balanced
v (m/s)
Pulleys
Table 54
nk
(min-1)
450
500
560
630
670
710
750
800
850
900
950
1000
700
950
1450
20
40
60
80
100
120
140
160
180
200
220
240
260
280
300
320
340
360
380
400
420
440
460
480
500
520
540
560
580
600
620
640
660
680
700
720
740
760
780
800
820
840
860
880
900
920
940
960
980
1000
1020
1040
1060
1080
1100
1120
1140
1160
1180
1200
1220
1240
1260
1280
1300
26.44
29.78
24.24
1.47
2.70
3.83
4.90
5.92
6.91
7.87
8.80
9.70
10.58
11.43
12.27
13.08
13.88
14.66
15.42
16.16
16.88
17.59
18.28
18.95
19.60
20.24
20.86
21.46
22.04
22.61
23.15
23.68
24.19
24.68
25.15
25.60
26.03
26.44
26.84
27.21
27.56
27.89
28.19
28.48
28.74
28.98
29.20
29.39
29.57
29.71
29.84
29.93
30.01
30.06
30.08
30.07
30.04
29.99
29.90
29.79
29.65
29.48
29.29
29.06
28.80
28.52
28.20
27.86
31.70
35.30
26.19
1.72
3.17
4.52
5.80
7.03
8.21
9.36
10.48
11.57
12.63
13.66
14.67
15.66
16.62
17.56
18.48
19.38
20.26
21.11
21.94
22.76
23.54
24.31
25.06
25.78
26.48
27.16
27.81
28.44
29.04
29.63
30.18
30.71
31.22
31.70
32.15
32.57
32.97
33.34
33.68
34.00
34.28
34.54
34.76
34.95
35.11
35.24
35.34
35.41
35.44
35.44
35.40
35.33
35.22
35.08
34.90
34.68
34.43
34.14
33.81
33.44
33.03
32.58
32.09
31.55
37.57
40.95
25.31
2.02
3.74
5.34
6.87
8.34
9.76
11.13
12.47
13.78
15.05
16.29
17.51
18.69
19.85
20.98
22.09
23.16
24.21
25.23
26.23
27.19
28.13
29.04
29.92
30.78
31.60
32.39
33.15
33.88
34.58
35.24
35.88
36.47
37.04
37.57
38.06
38.52
38.94
39.32
39.66
39.97
40.23
40.46
40.64
40.78
40.88
40.94
40.95
40.91
40.83
40.71
40.53
40.31
40.04
39.72
39.35
38.93
38.46
37.93
37.36
43.78
46.07
19.38
2.37
4.40
6.29
8.10
9.85
11.53
13.17
14.77
16.32
17.84
19.32
20.76
22.17
23.54
24.88
26.19
27.46
28.70
29.90
31.06
32.19
33.29
34.34
35.36
36.33
37.27
38.17
39.03
39.84
40.61
41.34
42.02
42.65
43.24
43.78
44.27
44.71
45.10
45.44
45.73
45.96
46.13
46.25
46.32
46.32
46.27
46.15
45.98
45.74
45.43
45.07
44.63
44.13
43.56
42.93
47.00
48.23
49.97
49.80
52.68
50.75
55.67
51.00
58.21
50.17
60.27
48.20
61.83
45.02
62.87
2.57
4.77
6.83
8.80
10.70
12.54
14.33
16.06
17.76
19.41
21.02
22.59
24.12
25.62
27.07
28.49
29.86
31.20
32.49
33.75
34.96
36.13
37.26
38.34
39.37
40.36
41.31
42.20
43.04
43.84
44.58
45.27
45.90
46.48
47.00
47.47
47.87
48.22
48.50
48.72
48.87
48.96
48.99
48.94
48.83
2.76
5.14
7.37
9.50
11.55
13.54
15.47
17.35
19.18
20.97
22.71
24.40
26.05
27.66
29.23
30.75
32.22
33.65
35.04
36.37
37.66
38.90
40.09
41.23
42.31
43.34
44.32
45.24
46.10
46.90
47.64
48.32
48.94
49.49
49.97
50.39
50.73
51.01
51.21
51.34
51.40
51.38
51.27
51.09
50.83
2.96
5.51
7.90
10.19
12.40
14.53
16.61
18.63
20.59
22.51
24.37
26.19
27.96
29.68
31.35
32.97
34.54
36.06
37.52
38.93
40.29
41.59
42.83
44.02
45.14
46.20
47.20
48.13
48.99
49.79
50.51
51.17
51.75
52.25
52.68
53.02
53.29
53.47
53.57
53.59
3.20
5.97
8.57
11.05
13.44
15.77
18.02
20.21
22.34
24.42
26.44
28.40
30.31
32.16
33.96
35.70
37.38
39.00
40.55
42.05
43.48
44.84
46.14
47.37
48.52
49.60
50.60
51.53
52.38
53.14
53.83
54.42
54.93
55.34
55.67
55.90
56.03
56.06
55.99
55.82
3.44
6.42
9.22
11.90
14.49
16.99
19.42
21.78
24.07
26.30
28.47
30.58
32.62
34.60
36.52
38.37
40.15
41.86
43.50
45.06
46.55
47.97
49.30
50.55
51.72
52.80
53.79
54.69
55.50
56.21
56.81
57.32
57.72
58.02
58.21
3.68
6.88
9.88
12.75
15.52
18.20
20.80
23.33
25.79
28.17
30.48
32.73
34.90
37.00
39.02
40.97
42.85
44.64
46.35
47.97
49.51
50.96
52.31
53.57
54.73
55.79
56.75
57.60
58.33
58.96
59.46
59.85
60.12
60.26
60.27
3.92
7.33
10.53
13.60
16.55
19.41
22.18
24.87
27.48
30.01
32.47
34.84
37.14
39.35
41.48
43.52
45.48
47.34
49.10
50.77
52.34
53.81
55.17
56.42
57.55
58.57
59.46
60.23
60.87
61.39
61.76
62.00
62.09
62.04
61.83
4.16
7.78
11.18
14.43
17.57
20.60
23.54
26.39
29.16
31.83
34.42
36.93
39.34
41.66
43.88
46.01
48.03
49.95
51.76
53.47
55.05
56.52
57.86
59.08
60.16
61.11
61.92
62.59
63.11
63.48
VB
Additional
per belt for
1,01 1,06
to
to
1,05 1,26
0.38
0.52
0.79
0.01
0.02
0.03
0.04
0.05
0.07
0.08
0.09
0.10
0.11
0.12
0.13
0.14
0.15
0.16
0.18
0.19
0.20
0.21
0.22
0.23
0.24
0.25
0.26
0.27
0.28
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
0.50
0.51
0.53
0.54
0.55
0.56
0.57
0.58
0.59
0.60
0.61
0.62
0.64
0.65
0.66
0.67
0.68
0.69
0.70
0.71
1.92
2.60
3.97
0.05
0.11
0.16
0.22
0.27
0.33
0.38
0.44
0.49
0.55
0.60
0.66
0.71
0.77
0.82
0.88
0.93
0.99
1.04
1.09
1.15
1.20
1.26
1.31
1.37
1.42
1.48
1.53
1.59
1.64
1.70
1.75
1.81
1.86
1.92
1.97
2.03
2.08
2.14
2.19
2.24
2.30
2.35
2.41
2.46
2.52
2.57
2.63
2.68
2.74
2.79
2.85
2.90
2.96
3.01
3.07
3.12
3.18
3.23
3.28
3.34
3.39
3.45
3.50
3.56
power (kW)
speed ratio i
1,27 >1,57
to
1,57
3.07
4.16
6.35
0.09
0.18
0.26
0.35
0.44
0.53
0.61
0.70
0.79
0.88
0.96
1.05
1.14
1.23
1.31
1.40
1.49
1.58
1.66
1.75
1.84
1.93
2.02
2.10
2.19
2.28
2.37
2.45
2.54
2.63
2.72
2.80
2.89
2.98
3.07
3.15
3.24
3.33
3.42
3.50
3.59
3.68
3.77
3.86
3.94
4.03
4.12
4.21
4.29
4.38
4.47
4.56
4.64
4.73
4.82
4.91
4.99
5.08
5.17
5.26
5.34
5.43
5.52
5.61
5.70
110
Pulleys
3.45
4.68
7.14
0.10
0.20
0.30
0.39
0.49
0.59
0.69
0.79
0.89
0.98
1.08
1.18
1.28
1.38
1.48
1.58
1.67
1.77
1.87
1.97
2.07
2.17
2.27
2.36
2.46
2.56
2.66
2.76
2.86
2.95
3.05
3.15
3.25
3.35
3.45
3.55
3.64
3.74
3.84
3.94
4.04
4.14
4.24
4.33
4.43
4.53
4.63
4.73
4.83
4.92
5.02
5.12
5.22
5.32
5.42
5.52
5.61
5.71
5.81
5.91
6.01
6.11
6.21
6.30
6.40
Special Drives
V-Flat Drives
The V-flat drive comprises one grooved pulley and one flat pulley.
This type of power transmission can, under certain conditions, be
used for drives with intermittent loading or with a large moment of
inertia. As flywheels or flat pulleys are often already present, the
costs of the drive can be reduced. When converting a flat belt drive
to a V-flat drive, it will usually be economic to continue to use the
flat pulley.
a
b
bu
b2
Da
DZ
=
=
=
=
=
=
da
dd
Fl
f
=
=
=
=
h
i
Lath
Ldth
pf
P
Sn
kf
=
=
=
=
=
=
=
=
=
pitch length Lw
dd
Da
a
111
Special Drives
V-Flat Drives
Table 55: Arc of contact factor c1 (for V-flat belt drives only)
kf =
0
0.07
0.15
0.22
0.29
0.35
0.40
0.45
0.50
0.57
0.64
0.70
0.75
0.80
0.85
0.92
1.00
1.07
1.15
1.21
1.30
1.36
1.45
kf =
Da d d
a
Ratio
Drive
centre
distance
Classiscal
V-belts
Kraftbands
D + DZ
i= a
3
dd
D + DZ
i= a
3
da
azul Da
azul Da
Da dd
a
c1
180
176
170
167
163
163
156
153
150
146
143
140
137
134
130
125
120
115
110
106
100
96
90
0.75
0.76
0.77
0.79
0.79
0.79
0.81
0.81
0.82
0.83
0.84
0.85
0.85
0.86
0.86
0.84
0.82
0.80
0.78
0.77
0.73
0.72
0.70
A/13
B/17
C/22
D/32
E/40
10
13
18
23
25
Kraftbands
a=
Da d d
0.85
a=
D a da
0.85
kf =
Da d d
a
kf =
D a da
a
K factor
0.5 kfzul 1.15
15J
25J
HA
B/
HB
C/
HC
D/
HD
DZ
13
(mm)
23
41
12
20
24
35
12
15
19
(Da + DZ dd)2
4a
26
(Da + DZ da)2
4a
Special Drives
V-Flat Drives
The flat pulley should be cylindrical in shape. With existing flat
pulleys that are to be re-used for a V-flat belt drive, the height of
the crown should be checked.
Da d a
2
(h < hmax)
Solution:
b = b2 + f
b = 120 + 35 = 155 mm
da
Da
Given/calculated:
V-Grooved pulley
6 grooves
Section
B/17
Drive centre distance a 850 mm
Table 56: Factor f for determining the face width of the flat pulley
Z/10, SPZ, A/13/HA,
3V/9J
SPB 5V/15J
C/22/HC, SPC
D/32/HD, 8V/25J
E/40
< 500
20
< 750
25
< 1000
30
< 1250
40
< 1750
45
500-750
25
750-1000
35
1000-1250
40
1250-1750
50
1750-2250
60
> 750
30
> 1000
40
> 1250
50
> 1750
65
> 2250
75
P 1000
v
D a bu z
36 000
Formula:
Calculating the static belt tension for
V-flat belt drives T (N)
T=
Sn
Fl
113
Special Drives
Tension / Guide Idlers
Idlers are grooved or flat pulleys that do not transmit any power in
a drive system. As they also generate additional bending stresses
in the belt, they should be employed sparingly and, where
possible, confined to the following situations:
Idler Configuration
Unless design requirements call for an outside idler, the inside idler
is usually more advantageous. Its diameter can be kept smaller
than that of the outside idler.
Depending upon the type of belt, inside idlers can either take the
form of a grooved or flat pulley.
Grooved
pulley
Flat
pulley
Kraftbands with
classical V-belts
A/HA; B/HB; C/HC; D/HD
114
Special Drives
Tension / Guide Idlers
Position of the Idler in the Belt Span
Fig. 3
flat pulley
sla
ck
sid
as far as possible
Fig. 1
slack side
On drives with long belt spans grooved pulleys are the preferred
choice for inside idlers because with flat pulleys transverse vibrations and belt turnover can occur.
Minimum Diameter for Inside Idlers
Inside idler smallest loaded pulley in the drive system or
smallest permissible pulley diameter for the
section used.
tight side
Fig. 2
sla
ck
sid
Exceptions:
Section
Diameter of the
smallest loaded
pulley in the drive
(mm)
Minimum diameter
of the outside idler
(mm)
Z/10
56 63
90
A/13
71 90
125
SPZ, 3V/9N
63 90
125
SPA
90 112
150
Idler Design
Grooved pulleys which are used as idlers can normally have
standard groove dimensions. On drives subject to severe vibration
and with long drive centre distances, it is recommended that deep
grooved pulleys be employed.
Flat pulleys, whether used as inside or outside idlers, are to be
placed as far as possible away from the grooved pulley on to which
the belt runs next. Any alignment errors between the idler and the
pulley and the resultant sideways movement of the belt on the pulley
are thus avoided.
Flat pulleys should, where possible, be cylindrical and not crowned. Flanged pulleys are recommended as belt guides. The corners
formed by the contact surface and pulley flange should be sharp.
Round edges encourage the belt to run up on the flanges causing
turn over.
115
Special Drives
Tension / Guide Idlers
The face width or the contact surface between the two flanges is
calculated as follows:
b = b2 + m
b = face width / contact surface
b2 = face width of the grooved pulley
m = additional value
Section
(mm)
(mm)
(mm)
15
20
25
30
35
40
45
Table 58
Number of idlers
c4
0
1
2
3
1.00
0.91
0.86
0.81
The nominal power rating PN per belt is, as before, based on the
smallest loaded pulley. Calculation of the arc of contact correction
factor c1 must be based on the smallest contact angle of the loaded
pulley which occurs when the belt is stretched to its maximum limit.
c1
c1
75
80
85
90
95
0.82
0.84
0.86
0.88
0.90
175
180
185
190
195
1.00
1.00
1.00
1.00
1.01
100
105
110
115
120
0.91
0.92
0.93
0.94
0.95
200
205
210
215
220
1.01
1.01
1.01
1.01
1.01
125
130
135
140
145
0.96
0.96
0.97
0.97
0.98
225
230
240
250
1.01
1.01
1.02
1.02
150
155
160
165
170
0.98
0.99
0.99
0.99
1.00
(ddg - ddk)2
4a
Fig. 4
Tension idler position
after maximum
belt stretch
Number of Belts
with standard
belt length
z=
fixed drive
centre distance
116
P c2
P N c 1 c 3 c4
Special Drives
Twist Drives
Drives in which the belt run is transposed are often simply termed
twist drives. These can be drives where the shafts are not parallel,
whose pulleys and idlers are not all arranged on one plane, or
drives with two parallel but counter rotating shafts. Because of the
twisting of the belt, this type of drive requires a certain degree of
lateral bending flexibility. The cross section of the V-belt is better
suited for this purpose than the flat belt. In most applications twist
drives use only single V-belts, but drives using belt sets are possible.
The crossing of the belt spans and the non-aligned entry of the belt
into the pulley leads to a reduction of the belt service life. The entry
and exit angle between the belt and the pulley plane should not be
more than 5. The required inclination of the shafts and the pulleys
relative to each other and the belt entry and exit angles should be
confirmed by practical tests. In addition, certain critical drives may
have a considerably improved safety factor if Optibelt special
constructions are used.
The most important types of twist drives and the associated design
guidelines are illustrated in the following text.
The ratio i or 1:i on quarter twist drives should not be greater than
2.5.
117
Special Drives
Twist Drives
Design guidelines for quarter twist drives
Plan view
Horizontal shaft
Vertical shaft
Elevation
Tight side
Horizontal shaft
1.
Drive centre
distance a
(mm)
y1 (mm)
Classical
V-belts
y1 (mm)
Wedge
belts
>
>
>
>
1200
1500
2000
2500
3000
1500
2000
2500
3000
3500
5
8
12
17
25
5
8
10
15
>
>
>
>
>
3500
4000
4500
5000
5500
4000
4500
5000
5500
6000
35
45
55
65
80
25
30
40
45
55
100
65
118
Table 60
> 6000
Vertical shaft
9. The drive centre distance must be adjustable so that the belt can
be fitted without force, the necessary tension applied, and the
belt stretch and wear taken up during its service life.
Special Drives
Twist Drives
Eighth twist drives
Design guidelines
Eighth twist drives are seldom required. The shafts in this drive
system are at an angle of 45 relative to each other.
1.
Minim
th
n leng
um spa
L min
Design guidelines
Table 61
Section
SPZ, 3V/9N
SPA
SPB, 5V/15N
SPC
8V/25N
A/13
B/17
C/22
D/32
E/40
(dg + dk)2
4a
Special Drives
optibelt Drive Belts with Aramid Tension Cord
Aramid is an organic polyamide fibre that is manufactured by a
complex chemical process. It is to be used wherever maximum
stress and reliability is required. The processing of this fibre
requires the highest level of experience and know-how as well as
sophisticated testing facilities. Aramid is used as the tension cord
material for highly loaded V-belts and Kraftbands.
Polyester
Aramid
Applications
Tensile
strength
(cN/tex)
Total
extension at
fracture
(%)
Tension
2%
(cN/tex)
81
190
14
4
15
73
cN = centiNewton
on horticultural machinery.
Optibelt drive belts using Aramid tension cords may reduce the
costs of the total drive, as there is a saving in both weight and
volume due to the reduced installation width. They are oil resistant,
and heat resistant up to approx. 100 C, and dust protected, as
standard.
A discussion of all the relevant criteria would be beyond the scope
of this manual. We therefore recommend that you contact our
Applications Engineering Department to discuss your specific
problems.
Belt surface
Aramid tension cord
Bedding compound
Bedding compound
Base compound
Moulded cog
120
Special Drives
optibelt Drive Belts with Aramid Tension Cord
Diagram 6
Diagram 7
Test arrangement
This diagram shows, in a direct comparison, the significantly higher power rating
of the Optibelt V-belt with the Aramid cord construction.
X
1600 N
=180 mm
=1750 min-1
=15 kW
In this graph, the belt extension under load (drive centre distance increase) is
plotted against time, for both materials. After only one hour, the increase with
polyester is already several times that of Aramid.
Sections / Lengths
Raw edge and wrapped Optibelt V-belts and Kraftbands are
available with Aramid to BS/DIN/ISO and USA Standard RMA/
MPTA.
Because of Aramids special properties, belts for multi-grooved
drives must be ordered in sets as the set tolerance is matched to the
Aramid tension cord.
Lengths and minimum order quantities on request.
Datum length Ld
Design Hints
Belt Tension for optibelt V-Belts
The correct level of belt tension has a direct and crucial bearing on
the trouble free transmission of power and the achievement of
acceptable belt service life. Belt tension which is either too high or
too low often results in premature failure. Belts which are over
tensioned sometimes cause damage to the bearings on the driver
or driven units.
Experience has shown that the more common tensioning methods,
e.g. the thumb pressure method do not ensure tension settings
that would enable drives to be operated at optimum efficiency, It
is therefore recommended that the required static belt tension T be
calculated for each drive using the Optibelt formulae. This tension
is the lowest possible required by a drive to transmit the highest
power level from the drive, taking account of the normal amount of
slip.
Once the belt has been fitted and the initial tension applied, it
should be checked using an Optibelt tension gauge. The belt
should be monitored regularly during the first few hours of
operation experience has shown that the first retensioning should
be undertaken after approximately 30 minutes to four hours
running under full load. This takes up the initial belt stretch and
bedding in to the pulley grooves.
Span
Ea
EL
100
L = anom sin
(mm)
(mm)
(rpm)
(N)
(rpm)
(rpm)
(rpm)
(mm)
(N)
(N)
= slip
(%)
n1L/n2L
n1B/n2B
) 100
+ k v2
When first fitted, the belt should be tightened to 1.3 x T i.e 30%
higher than the calculated belt tension.
122
At the rated loading, the slip should not exceed 1 %. The belt
service life is considerably shortened due to excessive flank
wear and over heating when tension is too low and slip ensues
underload.
Design Hints
Belt Tension for optibelt V-Belts and Kraftbands
Diagram 8: Belt tension graphs for Optibelt-SK wedge belts to BS 3790 and DIN 7753 Part 1
Section
f (N)
SPZ. 3V/9N
SPA
SPB. 5V/15N
SPC
0.07
0.12
0.19
0.37
25
50
75
125
Section
f (N)
Z/10
A/13
B/17
20
C/22
25
D/32
0.06
0.11
0.20
0.27
0.33
0.42
0.67
15
25
50
75
100
125
150
Diagram 9: Belt tension graphs for Optibelt-VB classical V-belts to BS 3790 and DIN 2215
Design Hints
Belt Tension for optibelt V-Belts and Kraftbands
Diagram 10: Belt tension graphs for Optibelt Super TX M=S wedge belts raw edge, moulded cogged
Section
f (N)
XPZ. 3VX
XPA
XPB. 5VX
XPC
0.06
0.11
0.18
0.34
25
50
75
125
Section
f (N)
ZX/X10
AX/X13
BX/X17
CX/X22
0.06
0.10
0.17
0.28
15
25
50
100
Diagram 11: Belt tension graphs for Optibelt Super TX M=S V-belts raw edge, moulded cogged
Design Hints
Belt Tension for optibelt V-Belts and optibelt KB Kraftbands
V. Belt Tensioning using a Length Additional Value
It has become evident that span deflection methods are not ideal
for checking the tension of Kraftbands of all sections, and of
individual belts. The following, very simple method for the
setting and checking of belt tension is therefore recommended:
+ k v2
Example:
PB = 1136 kW
c1 = 0.97
v = 25.91 m/s
Drive arrangement with one set comprising:
2 Optibelt KB Kraftbands 4-8V 3750/25J 9525 La
2 Optibelt KB Kraftbands 5-8V 3750/25J 9525 La
T
Where M is 4000 mm
MR
1000
A=
4000 5,4
1000
= 21.6 mm
Tighten the Kraftband until the lines marked on the top surface are
M plus the length additional value apart. This will set the correct
tension.
125
Design Hints
Belt Tension for optibelt V-Belts and optibelt KB Kraftbands
Table 62: Length addition per 1000 mm belt length
Section Kraftband
3V/9J
5V/15J
8V/25J
SPZ
SPA
SPB
SPC
A/HA
B/HB
C/HC
Single belt
3V/9N
5V/15N 8V/25N
SPZ
SPA
SPB
SPC
A/13
B/17
C/22
(mm)
(mm)
(mm)
(mm)
(mm)
(mm)
(mm)
(mm)
(mm)
(mm)
50
75
100
125
150
0.8
1.2
1.6
2.1
2.6
0.8
1.2
1.6
2.1
2.6
0.8
1.0
1.3
1.6
1.9
0.8
1.0
1.3
1.6
1.9
0.8
175
200
225
250
275
3.0
3.5
4.0
4.5
4.9
3.0
3.5
4.0
4.5
4.9
2.2
2.5
2.8
3.0
3.3
2.2
2.5
2.8
3.0
3.3
0.9
1.1
1.2
1.4
1.5
300
350
400
450
500
5.3
6.4
7.6
8.7
10.0
5.3
6.4
7.6
8.7
10.0
3.6
4.2
4.7
5.3
5.8
3.6
4.2
4.7
5.3
5.8
1.6
1.8
2.0
2.2
2.5
1.6
1.8
2.1
2.3
2.5
2.7
3.0
3.2
3.5
4.2
2.7
2.9
3.1
3.4
3.8
4.8
5.3
4.2
4.7
5.1
5.5
1.3
1.7
2.0
2.4
2.7
1.3
1.7
2.0
2.4
2.7
550
600
650
700
800
3.1
3.4
3.8
4.1
4.8
3.1
3.4
3.8
4.1
4.8
2.0
2.2
2.4
2.8
900
1000
1100
1200
1300
5.5
6.2
6.9
7.6
8.3
2.9
3.3
5.5
6.2
6.9
7.6
8.3
3.3
3.7
4.1
4.5
5.0
1400
1500
1600
1700
1800
9.0
9.7
10.4
11.1
11.8
3.7
4.1
4.6
5.0
5.5
9.0
9.7
10.4
11.1
11.8
5.4
5.8
6.3
6.8
7.3
1900
2000
2100
2200
2300
6.0
6.5
7.0
7.5
8.0
2400
2500
2600
2700
2800
8.6
9.6
10.6
11.7
12.8
2900
3000
3100
3200
3300
13.5
14.2
14.9
15.6
16.3
7.8
8.3
8.8
9.3
9.8
k for Kraftbands
0.12
0.25
0.69
0.12
0.16
0.25
0.55
0.16
0.27
0.45
0.07
0.19
0.57
0.07
0.12
0.19
0.37
0.11
0.20
0.33
126
Design Hints
Calculating the Axial Force/Shaft Loading under Dynamic Conditions
With drives having electric motors as the prime movers, care
should be taken to ensure that the dynamic loading can be safely
accommodated by the motor shafts and bearings to which it is
applied.
In the case of two pulley drives, the driver and driven shafts and the
bearings are subjected to the same dynamic axial force, but in
opposite directions. When idlers are employed, the magnitude
and the direction of the axial force are almost always different on
each pulley. If the magnitude and direction of the dynamic axial
force is to be determined, a graphical solution, using a vector
diagram for the dynamic forces in the tight side S1 and the slack
side S2, is always recommended.
electric motors,
internal combustion engines,
turbines,
and very heavy-duty drives such as stone crushers, calenders,
and heavily loaded mills,
call for the dynamic bearing load to be determined, that
is the shaft and bearing loads on both the driver and the driven
shafts.
Exact calculation of the dynamic axial force saves the unnecessary expense of:
shaft failure or
over designed bearings and shafts.
If only the magnitude of the dynamic axial force is to be determined, this can be achieved using the formula for Sa dyn. Data from
the calculation examples given on pages 59 to 61.
PB = 171.6 kW
c1 = 1.00
v = 21.76 m/s
= 170
1020 PB
c1 v
S1
1020 171,6
1.0 21.76
8044 N
S2
158 N
A) Graphical solution
Sa dyn
Design Hints
Belt tensioning for optibelt tension gauges
Tension gauges optibelt Optikrik
Optikrik
Tension gauges
This gauge serves a simplified method of
belt tensioning.
This simplified tensioning method should
be used for example when technical data
are not known and the optimum tension
therefore cannot be calculated. This method requires only knowledge of the diameter of the small pulley and the belt section
and construction.
The Optibelt tension gauge is used to read
off the belt tensioning. By reducing or
increasing the belt tensioning the desired
value can be obtained.
For different tensioning values, Optikrik 0,
I, II, III with corresponding measurement
areas are available.
optibelt TT 2
Tension Tester
128
Design Hints
Belt tensioning for Optibelt V-Belts
Section
Diameter of
small pulley
RED POWER II
initial fitting
re-fitting
new V-belts existing V-belts
(mm)
Standard
(wrapped)
initial
fitting
Retension
SUPER TX M=S
initial
fitting
Retension
SPZ; 3V/9N;
XPZ; 3VX/9NX
71
> 71 90
> 90 125
>125 *
250
300
400
200
250
300
200
250
350
150
200
250
250
300
400
200
250
300
SPA;
XPA
100
>100 140
>140 200
>200 *
400
500
600
300
400
450
350
400
500
250
300
400
400
500
600
300
400
450
SPB; 5V/15N;
XPB; 5VX/15NX
160
>160 224
>224 355
>355 *
700
850
1000
550
650
800
650
700
900
500
550
700
700
850
1000
550
650
800
SPC;
XPC
250
>250 355
>355 560
>560 *
1400
1600
1900
1100
1200
1500
1000
1400
1800
800
1100
1400
1400
1600
1900
1100
1200
1500
Z/10;
ZX/X10
50
> 50 71
> 71 100
>100 *
90
120
140
70
90
110
120
140
160
90
110
130
A/13;
AX/X13
80
> 80 100
>100 132
>132 *
150
200
300
110
150
250
200
250
400
150
200
300
B/17;
BX/X17
125
>125 160
>160 200
>200 *
300
400
500
250
300
400
450
500
600
350
400
450
C/22;
CX/X22
200
>200 250
>250 355
>355 *
700
800
900
500
600
700
800
900
1000
600
700
800
70
150
500
1300
150
600
1400
3100
N
N
N
N
speed v = 5 to 42 m/s
speed v = 5 to 30 m/s
129
Design Hints
Installation and Maintenance Aids
Safety: Before starting any maintenance work, it is extremely important that any machine components
are in a safe position which cannot be changed during maintenance work. In addition, safety
recommendations of the manufacturer are to be strictly observed.
optibelt KS V-Grooved Pulley with Taper Bush
The V-grooved pulleys are to be checked
for damage and correct dimensions before installation.
Installation (see figures on page 132)
1. All shiny surfaces like bore and end envelope of
cone of the taper bush as well as the conical bore
of the pulley have to be cleaned and degreased.
Insert taper bush and hub and align all connecting
bores. Half tapping holes have to face half plain
borings.
2. Stud screws (TB 1008-3030) and/or fillister head
screws (TB 3525-5050) should be slightly
greased and screwed in. Do not jet tighten the
screws.
TB
TB
TB
TB
TB
TB
TB
TB
TB
1008,
1210,
2012
2517
3020,
3525,
4040
4545
5050
1108
1215, 1310, 1610, 1615
3030
3535
Opening
width
No. of
screws
3
5
6
6
8
10
12
14
14
2
2
2
2
2
3
3
3
3
Tightening
torque
(Nm)
5.7
20.0
31,0
49.0
92.0
115.0
172.0
195.0
275.0
Note!
Maximum recommended shaft deviation 0.5
Note!
Check whether the face widths of the V-grooved pulleys have the same sizes. A
possible deviation of the face width has to be taken into consideration. With a
symmetrical face set-up, the distance of the parallel to the smaller face is half the
deviation.
130
Design Hints
Installation and Maintenance Aids
Initial Installation
Always install the V-belts without using force. Installations using screw drivers,
crowbars etc. cause inner and outer damages to the belt. V-belts installed under force
might only run for several days. A proper installation of the belt saves you time and
money.
With too little setting range for the positioning, the V-grooved pulleys should be pushed
onto the shafts with the belts already fitted.
Belt Tensioning
Use belt tensioning values according to Optibelts recommendations. Set the motor to
the given belt tension in a parallel mode. Operate the belt for some revolutions and
check the belt tension again. By experience, belt tension should be checked again after
an operation time of about 0.5 to 4 hours and corrected, if necessary.
* For further hints on belt tensioning see page 128.
Pulley
diameter
dd1, dd2
112
224
450
630
900
1100
1400
1600
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
Control Processes
We recommend controlling the drive regularly, e.g. after 3 to 6 months. V-grooved
pulleys are to be controlled for wear and consistence. Use the Optibelt section and
pulley groove template as aids.
When changing V-grooved pulleys with taper bush (see figure on page 132) the
following aspects have to be observed.
1. Loosen all screws. Screw out one or two screws depending on the bush size, grease them and screw
them into the proof test bore.
2. Tighten the screw or screws equally until the bush unscrews from the hub and the pulley can be moved
on the shaft freely.
3. Take off the pulley with the bush from the shaft.
**
131
Design Hints
V-Grooved Pulleys with Taper Bushes
Assembley
Dimension
TB 1008-3030
Dimension
TB 3525-5050
Disassembly
Dimension
TB 1008-3030
132
Dimension
TB 3525-5050
Design Hints
Storage
General note on storage
Properly stored V-belts retain their properties for many years
(see also DIN 7716). However, when stored under poor
conditions or handled incorrectly, the physical properties of
most rubber products will be impaired. This can be the consequence for example of the effects of oxygen, ozone, extreme
temperatures, light, moisture or solvents.
Proper Storage
Because stress can promote both permanent deformation and
cracking, care must be taken to ensure that V-belts are stored
without stress i.e. without tension, compression or any other
form of pressure.
If V-belts have to be stored horizontally and stacked upon each
other, it is recommended that the stack height does not exceed
300 mm in order to avoid permanent deformation. If, in order
to save space, V-belts are hung, the diameter of the cylinder on
which the belts rest should be at least ten times the height of the
belt section.
Storage area
The storage area should be dry and dust free. V-belts must not
be stored close to chemicals, solvents, fuels, lubricants and
acids etc.
optibelt S=C plus and optibelt SUPER TX
M=S belts do not need to be stored in sets as they can
be formed into sets without having to be measured.
Temperature
V-belts should be stored at temperatures between + 15 C and
+ 25 C. Lower temperatures usually have no detrimental effect
on the V-belts. Since, however, belts become very stiff at low
temperatures, they should be warmed to approximately + 20 C
before fitting to avoid fracture and cracking.
Radiators and supply pipes should be screened. V-belts should
be stored at least 1m away from radiators.
Cleaning
Dirty V-belts can be cleaned using a 1:10 mixture of glycerine
and methylated spirits. Petrol, benzole, turpentine and the like
should not be used.
In addition, sharp objects, wire brushes, emery paper etc. must,
under all circumstances, be avoided as these can cause damage to the belt.
Light
V-belts should be protected against light, especially direct
sunlight and strong artificial light with a high ultra-violet content
(ozone formation) such as naked fluorescent tubes. Illumination
using conventional light bulbs is advisable.
Ozone
In order to counteract the harmful effects of ozone, warehouses
should not contain any appliances that generate ozone, for
example fluorescent lights, mercury vapour lamps or high
voltage electrical equipment. Combustion gases and vapours
which could lead to the formation of ozone by photo-chemical
processes must be avoided or eliminated.
Moisture
Damp storage areas are unsuitable. Care must be taken to
ensure that condensation does not develop. The most favourable relative air humidity is below 65%.
133
Design Hints
Physical Properties
30
+ 100
good
yes
SUPER TX M=S
raw edge, moulded
cogged V-belts
30
+ 90
good
MARATHON 1,
MARATHON 2 M=S
automotive belts
30
+ 90
RED POWER II
high-performance
wedge belts
VB
classical V-belts
KB
Kraftbands
DK
double section V-belts
SUPER VX
variable speed belts
RB
ribbed belts
134
Sjpecial
construction
yes1)
Standard
construction
yes
40
+ 70
Smooth running
limited
SK
high-performance
wedge belts
30
+ 90
Standard
construction
Stretch
Anti-static properties
(after testing)
Oil
resistant
Standard
construction
Ambient temperature
maximum/minimum
(C)
Special
construction
XHR
ja
medium
good
low
very
low
yes1)
good
very
low
yes
yes2)
good
very
low
good
yes
M2
yes2)
good
very
low
yes1)
medium
good
low
very
low
very
low
40
+ 70
30
+ 90
limited
yes
40
+ 70
35
+ 90
limited
yes
good
low
35
+ 85
good
yes
medium
low
30
+ 90
good
yes
very
good
very
low
PJ
PK, PL
Special
construction
very
good
low
30
+ 90
30
+ 120
good
ja
Design Hints
Recommended applications
Synchronous
Standard
construction
Special construction
Maintenance
up to
97 %
good
low
possible
no
up to limi1 : 10 ted
good
low
42
up to
97%
good
low
possible
no
up to limi1 : 10 ted
depends
on section up to
97 %
42
good
low
possible
no
up to limi1 : 12 ted
good
42
up to
97 %
good
low
possible
no
up to limi1 : 12 ted
30
up to
97 %
good
low
possible
no
up to limi1 : 12 ted
good
low
depends up to
on section
97 %
42
very
good
very
low
not
possible
no
up to limi1 : 15 ted
very
good
low
Fans, shredders, road millers, extruders, rotary mowers, stone crushers, saw mills, vibration rollers,
conveyors, mixers, combine harvesters, pulpers
up to
95 %
good
low
not
possible
no
up to
1:5
very
good good
low
30
Efficiency
42
Recommended
max. belt speed
m/s
Use on variable
speed pulleys
Vibration behaviour
Use with
outside
idlers
Behaviour under
shock loading
Recommended max.
speed ratio
Physical Properties
depends
up to
on section 95 %
42
depends up to
on section 96 %
60
low
good
low
gut
no
up to
1 : 12
for 2
variable
speed
pulleys
limited
low
good
very
low
not
possible
no
up to good
1 : 35
low
Offset machines, washing machines, milling machines, drills, auxiliary drives, main shaft drives
135
Design Hints
30
+ 85
ZRM
timing belts made
of polyurethane
Stretch
ZR
timing belts
Smooth running
30
+ 85
Oil
resistant
Standard
construction
OMEGA
timing belts
Special
construction
XHR
Ambient temperature
maximum/minimum
(C)
Standard
construction
Anti-static properties
(after testing)
Physical Properties
limited
yes ja1)
very
good
good
keine sehr
gering
limited
yes
very
good
keine
30
+ 80
good
no
good
keine
RR
plastic round section
belting
10
+ 80
good
no
medium
high
KK
plastic V-belting
10
+ 80
good
no
medium
high
Optimat OE
open ended
V-belting, punched
DIN 2216
20
+ 70
limited
no
medium
high
PKR
V-belts with patterned top surface
30
+ 70
limited
yes
medium
low
Optimax HF
high-performance
flat belts
20
+ 110
limited
no
very
good
low
136
30
+ 120
Design Hints
Special construction
Maintenance
maintenance
free
yes
up to
1 : 10 good
gut
maintenance
free
not
possible
no
up to
1 : 10 good
gut
frequent
retensioning
Special machinery
low
not
possible
no
up to
1 : 10 good
gut
frequent
retensioning
medium
limited
possible
no
up to limi1 : 10 ted
frequent
retensioning
low
limited
possible
no
up to limi1 : 10 ted
very
low
not
possible
no
up to very
1 : 12 good
depends
on section up to
98 %
80
sensitive
up to
95 %
good
20
up to
90 %
depends
on section up to
95 %
20
70
up to
95 %
good
good
good
Standard
construction
gut
sensitive
Synchronous
up to
1 : 10 good
depends
on section up to
98 %
80
20
gut
depends
not
on
possible
speed
good
Recommended applications
sensitive
up to
95 %
Use with
outside
idlers
maintenance
free
depends up to
on section 98 %
80
20
Recommended max.
speed ratio
Use on variable
speed pulleys
Vibration behaviour
Behaviour under
shock loading
Efficiency
Recommended
max. belt speed
m/s
Physical Properties
yes
up to good
1 : 10
depends
not
on
speed possible
yes
depends
not
on
speed possible
low
gut
low
low
137
Design Hints
Problems Causes Remedies
Problems
Belt failure shortly after fitting
138
Causes
Remedies
Drive blocked
Remove cause
Excessive heat
Excessive cold
Contamination by chemicals
Drive undersized
Correct tension
Unbalanced V-pulleys
Balance pulleys
Design Hints
Problems Causes Remedies
Problems
Belts turn over in pulley grooves
Causes
Remedies
Realign pulleys
Match belt and pulley groove section
Renew pulleys
Use an inside idler on drive slack side; use
Optibelt KB Kraftbands
Re-tension drive
Remove foreign matter and install drive
guard
Replace pulleys
Realign pulleys
Realign pulleys
Drive overloaded
Replace pulleys
Should other problems occur, please contact our engineers from the applications engineering dept They will require comprehensive technical details in order to provide
you with concrete solutions.
139
Design Hints
Length Measurement Conditions and Conversion Factors
Measuring the Belt Length
The belt is placed over two identically sized measuring pulleys with
the design of groove shown in the following drawings. The
dimensions are given in the Tables 63 to 69, on pages 141/142.
Force Q (N)
140
Design Hints
Length Measurement Conditions and Conversion Factors
Table 63: Optibelt SK wedge belts
Optibelt Super TX M=S wedge belts, raw edge, moulded cogged
Measurement pulleys and force to BS 3790, DIN 7753 Part 1 and ISO 4183
Datum
circumference
Ud
= dd
Datum
diameter
Outside
diameter
Datum
width
Groove
angle
Groove
depth
Force
Outside length
Inside length
0.05
0.05
da
bd
10
tmin
Q (N)
La (mm)
Li (mm)
SPZ; XPZ
300
95.49
100
8.5
36
11
360
La Ld + 13
La Li + 51
Li Ld 38
Li La 51
SPA; XPA
450
143.24
149
11.0
36
14
560
La Ld + 18
La Li + 63
Li Ld 45
Li La 63
SPB; XPB
600
190.99
198
14.0
36
18
900
La Ld + 22
La Li + 82
Li Ld 60
Li La 82
SPC; XPC
1000
318.31
328
19.0
36
24
1500
La Ld + 30
La Li + 113
Li Ld 83
Li La 113
Section
dd
Outside
diameter
Section
8V/25N
Groove
angle
Groove
depth
Force
Inside length
0,13
Upper
groove
width
b1
0,13
15
tmin
Q (N)
Li (mm)
300
95.5
8.90
38
9.0
445
Li La 42
600
191.0
15.24
38
15.0
1000
Li La 71
1000
318.3
25.40
38
25.5
2225
Li La 120
da
Section
Datum
circumference
Ud
= dd
Datum
diameter
dd
Outside
diameter
Datum
width
Groove
angle
Groove
depth
Force
Outside length
Inside length
da
bd
10
tmin
Q (N)
La (mm)
Ld (mm)
0,05
0,05
70
22.28
24.88
4.2
32
30
La Li + 19
La L d + 8
Ld Li + 11
L d La 8
Y/6
90
28.65
31.85
5.3
32
40
La Li + 25
La Ld + 10
Ld Li + 15
Ld La 10
140
44.56
48.56
6.7
32
80
La Li + 31
La Ld + 12
Ld Li + 19
Ld La 12
Z/10; ZX/X10
180
57.30
62.30
8.5
34
10
110
La Li + 38
La Ld + 16
Ld Li + 22
Ld La 16
A/13; AX/X13
300
95.50
102.10
11.0
34
12
200
La Li + 50
La Ld + 20
Ld Li + 30
Ld La 20
B/17; BX/X17
400
127.32
135.72
14.0
34
15
300
La Li + 69
La Ld + 29
Ld Li + 40
Ld La 29
20
520
165.52
175.12
17.0
34
18
750
La Li + 79
La Ld + 31
Ld Li + 48
Ld La 31
C/22; CX/X22
700
222.82
234.22
19.0
34
20
750
La Li + 88
La Ld + 30
Ld Li + 58
Ld La 30
25
800
254.65
267.25
21.0
34
22
750
La Li + 100
La Ld + 39
Ld Li + 61
Ld La 39
D/32
1000
318.31
334.52
27.0
36
28
1400
La Li + 126
La Ld + 51
Ld Li + 75
Ld La 51
E/40
1800
572.96
596.96
32.0
36
36
1800
La Li + 157
La Ld + 77
Ld Li + 80
Ld La 77
141
Design Hints
Length Measurement Conditions and Conversion Factors
Table 66: Optibelt KB Kraftbands with high-performance wedge belts
Measurement pulleys and force
Groove
angle
Groove
depth
Mean
distance
Tolerance
Tol.
Force
per rib
Inside length
0,13
Upper
groove
width
b1
0,13
15
tmin
e1)
e2)
Q (N)
Li (mm)
300
95.50
8.90
38
9.0
10.30
0.25
0.5
445
Li La 42
5V/15J
600
191.00
15.20
38
15.0
17.50
0.25
0.5
1000
Li La 71
8V/25J
1000
318.30
25.40
38
25.5
28.60
0.40
0.8
2225
Li La 120
Outside
circumference
Ua
= da
Outside
diameter
3V/9J
Section
da
Table 67: Optibelt KB Kraftbands Section SPZ, SPA, SPB and SPC
Measurement pulleys and force
Section
Datum
circumference
Ud
= dd
Datum
Outside
diameter diameter
Datum
width
Groove
angle
Groove
depth
Mean Tolerance
distance
Tol.
Force
per rib
Datum length
0,13
0,13
da
bd
15
tmin
e1)
e2)
Q (N)
Ld (mm)
dd
SPZ
300
95.49
100.00
8.5
36
11.0
12.00
0.30
0.5
360
Ld La 13
SPA
450
143.24
149.00
11.0
36
14.0
15.00
0.30
0.5
560
Ld La 18
SPB
600
190.99
198.00
14.0
36
18.0
19.00
0.40
0.8
900
Ld La 22
SPC
1000
318.31
328.00
19.0
36
24.0
25.50
0.40
0.8
1500
Ld La 30
Groove
depth
Mean
distance
Tolerance
Tol.
Force
per rib
Inside length
0,13
Upper
groove
width
b1
0,13
15
tmin
e1)
e2)
Q (N)
Li (mm)
254
80.85
12.45
32
12.5
15.88
0.38
0.8
300
Li La 36
B/HB
381
121.28
16.00
32
14.5
19.05
0.38
0.8
450
Li La 62
C/HC
635
202.13
22.33
34
20.0
25.40
0.38
0.8
850
Li La 75
D/HD
889
282.96
31.98
34
28.0
36.53
0.38
0.8
1000
Li La 111
Outside
circumference
Ua
= da
Outside
diameter
A/HA
Section
da
Outside
diameter
da
Upper groove
width
b1
Groove
angle
20
Groove
depth
tmin
Q (N)
AA/HAA
300
95.49
12.6
34
300
BB/HBB
400
127.32
16.2
34
10
450
CC/HCC
600
190.99
22.3
34
14
850
DD/HDD
900
286.48
32.0
34
20
1400
22 x 22
600
190.99
22.3
34
14
750
25 x 22
942
300.00
25.0
34
22
1200
Section
142
Force
Design Hints
Length Tolerances
Table 70: Wedge belts DIN 7753 Part 1
Length tolerance (mm
Permissible deviation from
pitch length
Section
SPZ/XPZ
SPA/XPA
SPB/XPB
SPC/XPC
>
>
>
>
>
>
>
>
630
900
1 250
2 000
3 150
5 000
8 000
10 000
900
1 250
2 000
3 150
5 000*
8 000
10 000
12 500
wrapped
DIN 7753
DIN
DIN
2.0
2.0
2.0
4.0
6.0
8.0
6 bis
9
9 bis 12
12 bis 20
20 bis 32
32 bis 50
50 bis 80
80 bis 100
100 bis 125
wrapped
2.0
2.0
2.0
2.0
2.0
4.0
6.0
8.0
raw edge
2.0
4.0
6.0
6.0
10.0*
wrapped
2.0
2.0
2.0
4.0
6.0
10.0
raw edge
2.0
4.0
6.0
6.0
10.0*
16.0
5
Y/6
8
Z/10; ZX/X10
A/13; AX/X13
B/17; BX/X17
20
C/22; CX/X22
25
D/32
E/40
250
> 250
315
> 315
400
> 400
500
> 500
630
> 630
800
> 800
900
> 900 1 250
> 1 250 1 600
> 1 600 2 000
> 2 000 2 500
> 2 500 3 150
> 3 150 4 000*
> 4 000 5 000
> 5 000 6 300
> 6 300 8 000
> 8 000 10 000
>10 000 12 500
>12 500 15 000
>15 000 20 000
DIN
DIN
DIN
DIN
DIN
DIN
DIN
DIN
2,0
2,0
2,0
2,0
2,0
2,0
4,0
4,0
6,0
8,0
DIN
DIN
DIN 2215
+ 8.0/
+ 9.0/
+ 10.0/
+ 11.0/
+ 13.0/
+ 15.0/
+ 17.0/
+ 19.0/
+ 23.0/
+ 27.0/
+ 31.0/
+ 37.0/
+ 44.0/
+ 52.0/
+ 63.0/
+ 77.0/
+ 93.0/
+ 112.0/
+ 140.0/
+ 170.0/
4.0
4.0
5.0
6.0
6.0
7.0
8.0
10.0
11.0
13.0
16.0
18.0
22.0
26.0
32.0
38.0
46.0
56.0
70.0
85.0
raw edge
2.0
2.0
2.0
4.0
4.0
4.0
6.0
8.0
8.0*
wrapped
raw edge
2.0
2.0
2.0
2.0
2.0
2.0
2.0
4.0
4.0
4.0
8.0
8.0
12.0
12.0
20.0
20.0
32.0
32.0
48.0
48.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
4.0
4.0
4.0
8.0
8.0
12.0*
Design Hints
Length Tolerances
Table 72: Wedge belts USA Standard RMA/MTPA
Section
3V/9N;
3VX/9NX,
5V/15N;
5VX/15NX;
8V/25N
Length
designation
265
530
560
600
800
1 000
1 120
1 500
2 000
2 500
3 150
4 000
4 250
4 750
500
800
1 000
1 060
1 400
1 900
2 360
3 000
3 750
4 500
5 000
1 270
acc. RMA/MPTA
2
2
2
2
2
2
2
4
4
6
8
8
12
2 032
2 540
2 692
3 556
4 826
5 994
7 620
9 525
11 430
12 700
8
10
10
10
13
15
15
20
20
20
25
25
30
30
4
2
2
2
2
2
2
2
4
4
6
8
8
12
RMA/MPTA
4
4
6
6
6
6
10*
4
4
6
6
6
6
10
10
10
16
16
16
16
24
Section
AA/HAA
BB/HBB
CC/HCC
DD/HDD
22 x 22
25 x 22
1 250
1 320
1 700
2 120
2 650
3 350
4 250
5 300
6 700
8 500
<
<
<
<
<
<
<
<
<
<
1 320
1 700
2 120
2 650
3 350
4 250
5 300
6 700
8 500
10 000
4.0
4.0
5.0
6.3
8.0
10.0
12.5
16.0
20.0
25.0
Table 74: Kraftbands with high-performance wedge belts and classical V-belts
Section
3V/9J; 3VX/9JX
5V/15J; 5VX/15JX
8V/25J
SPZ; SPA; SPB; SPC
A/HA
B/HB
C/HC
D/HD
144
Tables
Conversion Factors
Optibelt SK high-performance wedge belts DIN 7753 Part 1
Section
Cross-section
bxh
Section
base
width
bu
Belt length
Datum
width
bd
SPZ
9.7 x 8
4.2
8.5
SPA
12.7 x 10
5.8
11.0
SPB
16.3 x 13
7.3
14.0
SPC
22.0 x 18
9.6
19.0
Datum
length
Ld
La
La
La
La
La
La
La
La
Ld
Li
Ld
Li
Ld
Li
Ld
Li
+
+
+
+
+
+
+
+
Datum length
Ld
13
51
18
63
22
82
30
113
Inside length
Li
Li
Li
Li
Li
Li
Li
Li
Li
Ld
La
Ld
La
Ld
La
Ld
La
38
51
45
63
60
82
83
113
Recommended
minimum pulley
diameter
(mm)
Datum
diameter
dd
Belt
weight
( kg/m)
63
0.074
90
0.123
140
0.195
224
0.377
63
0.074
140
0.195
335
0.575
9.0 x 8
4.2
5V/15N
15.0 x 13
7.3
8V/25N
25.0 x 23
9.6
Outside
length
La
Ld L a
Li La 42
Ld La 11
Li La 71
Li La 120
Outside
diamter
da
The conversion factors Ld to La is used when a section according to DIN 7753 Part 1 is to be replaced by the corresponding section according to RMA/MPTA.
Optibelt Super TX M=S wedge belts raw edge, moulded cogged DIN 7753 Part 1
XPZ
9.7 x 8
4.2
8.5
XPA
12.7 x 10
5.8
11.0
XPB
16.3 x 13
7.3
14.0
XPC
22.0 x 18
9.6
19.0
Datum
length
Ld
La
La
La
La
La
La
La
La
Ld
Li
Ld
Li
Ld
Li
Ld
Li
+
+
+
+
+
+
+
+
13
51
18
63
22
82
30
113
Li
Li
Li
Li
Li
Li
Li
Li
Ld
La
Ld
La
Ld
La
Ld
La
38
51
45
63
60
82
83
113
Datum
diameter
dd
56
0.065
71
0.111
112
0.183
180
0.340
Optibelt Super TX M=S wedge belts raw edge, moulded cogged USA Standard RMA/MTPA
3VX/9NX
9.0 x 8
4.2
Ld L a
Outside
length
La
Li La 42
Outside
diamter
56
40
0.062
Datum
diameter
dd
63
0.099
90
0.165
140
0.276
20
0.018
28
0.026
40
0.042
50
0.064
71
0.109
112
0.196
160
0.266
180
0.324
250
0.420
355
0.668
500
0.958
Ld La 11 Li La 71
5VX/15NX
15.0 x 13
7.3
112
da
The conversion factors Ld to La is used when a section to BS 3790 or DIN 7753 Part 1 is to be replaced by the corresponding section to RMA/MPTA.
0.065
0.183
10.0 x 6
5.9
8.5
AX/X13
13.0 x 8
7.5
11.0
BX/X17
17.0 x 11
9.4
14.0
CX/X22
22.0 x 14
12.3
19.0
Datum
length
Ld
La
La
La
La
La
La
La
La
Li
Ld
Li
Ld
Li
Ld
Li
Ld
+
+
+
+
+
+
+
+
38
16
50
20
69
29
88
30
La
La
La
La
La
La
La
La
La
La
La
La
La
La
La
La
La
La
La
La
La
La
Li
Ld
Li
Ld
Li
Ld
Li
Ld
Li
Ld
Li
Ld
Li
Ld
Li
Ld
Li
Ld
Li
Ld
Li
Ld
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
19
8
25
10
31
12
38
16
50
20
69
29
79
31
88
30
100
39
126
51
157
77
Li
Li
Li
Li
Li
Li
Li
Li
Ld
La
Ld
La
Ld
La
Ld
La
22
38
30
50
40
69
58
88
5.0 x 3
2.8
4.2
Y/6
6.0 x 4
3.3
5.3
8.0 x 5
4.5
6.7
Z/10
10.0 x 6
5.9
8.5
A/13
13.0 x 8
7.5
11.0
B/17
17.0 x 11
20
9.4
14.0
20.0 x 12.5
11.4
17.0
C/22
22.0 x 14
12.3
19.0
25
25.0 x 16
14.0
21.0
D/32
32.0 x 20
18.2
27.0
E/40
40.0 x 25
22.8
32.0
Datum
length
Ld
Ld
Ld
Ld
Ld
Ld
Ld
Ld
Ld
Ld
Ld
Ld
Ld
Ld
Ld
Ld
Ld
Ld
Ld
Ld
Ld
Ld
Ld
Li
La
Li
La
Li
La
Li
La
Li
La
Li
La
Li
La
Li
La
Li
La
Li
La
Li
La
11
8
15
10
19
12
22
16
30
20
40
29
48
31
58
30
61
39
75
51
80
77
Datum
diameter
dd
145
Tables
Conversion Factors
Optibelt KB Kraftbands with high-performance wedge belts to ISO 5290/USA Standard RMA/MTPA
Section
3V/9J
Belt length
Lower belt
width
Height *
h
bu
of the
single belts
9.9
4.2
5V/15J
15.1
7.3
8V/25J
25.5
9.6
Nominal
length
Outside length
La
Datum length
Ld
Inside length
Li
Li La 42
Li La 71
La Ld + 13
Recommended
minimum pulley
diameter
(mm)
Rib weight
( kg/m)
67
0.122
160
0.252
Li La 120
315
0.693
80
0.120
La Ld + 18
112
0.166
La Ld + 22
180
0.261
La Ld + 24
250
0.555
Outside
length
La
Outside
diameter
da
10.5
5.4
SPA
12.5
7.0
SPB
15.6
8.8
SPC
22.6
9.3
Datum
length
Ld
Datum
diameter
dd
9.9
7.5
La Li + 36
Ld Li + 30
13.0
9.4
La Li + 62
Ld Li + 40
16.2
12.3
La Li + 75
Ld Li + 58
22.4
18.2
La Li + 111
Ld Li + 75
Datum
lenth
Ld
Datum
diameter
dd
80
0.163
125
0.266
200
0.447
355
0.798
80
0.163
125
0.266
200
0.447
355
0.798
9.9
7.5
HB
13.0
9.4
HC
16.2
12.3
Outside
length
La
Li La 36
Li La 62
Li La 75
Li La 111
HD
22.4
18.2
AA/HAA
Cross-section
bxh
Section
base
width
bu
13 x 10
Datum
length
Recommended
minimum pulley
diameter
(mm)
Belt length
BB/HBB
17 x 13
CC/HCC
22 x 17
DD/HDD
32 x 25
Reference
length
Outside
diameter
da
Outside
diameter
da
Belt
weight
( kg/m)
80
0.150
125
0.250
224
0.440
355
0.935
280
0,511
280
0,625
22 x 22
25 x 22
25 x 22
Reference
length
Outside
diameter
da
Cross-section
bxh
Section
base
width
bu
9.5
10 x 8
4.9
8.5
12.5
13 x 10
5.8
11.0
Datum
width
bd
Belt length
Nominal
length
Outside length
La
Datum length
Ld
Inside length
Li
Outside
length
La
Ld La 13
Li La 51
Ld La 18
Li La 63
Recommended
minimum pulley
diameter
(mm)
Agreed between
vehicle and belt
manufacturers
Belt
weight
( kg/m)
0.070
0.118
Optibelt Marathon 1/Marathon 2 M=S automotive V-belts raw edge, moulded cogged, service free
AVX 10
10 x 8
4.9
8.5
AVX 13
13 x 10
5.8
11.0
146
Outside
length
La
Ld La 13
Li La 51
Ld La 18
Li La 63
Agreed between
vehicle and belt
manufacturers
0.076
0.118
Applications
Here are just a few examples from the wide range of applications
in which Optibelt conveyor belts are used successfully.
For transporting:
doors, cupboard components, veneer and plastic panels in the
woodworking industry
body parts and sharp-edged sheet metal panels in the automobile industry
cardboard and boxes in the packaging industry
roof tiles, concrete slabs and paviors in cement works
tiles
Construction / Quality
Special purpose conveyor elements are used in place of expensive
conventional type conveyor belts. They run individually, or in sets
adjacent to each other, transporting goods horizontally, or up or
down inclines. Vertical conveying is also possible if the belts are
arranged top surface to top surface gripping the articles between
them.
Temperature
resistance
(C)
Hardness
Oil
Marking
(Shore A) resistance
SBR-NR/
light coloured 40 to + 70 55/65*
CR/black
parcels
bowling alley balls
In addition to conveyor applications, these belts are also used for:
labelling and closing tins, bottles and jars in the preserves
industry
Table 71
Design/
Colour
sheet glass
25 to + 100
65
no
no
limited
yes
Properties
Special surfaced belts are used in place of expensive conventional
type conveyor belts. They run individually, or in sets arranged
adjacent to each other, transporting goods horizontally, or up or
down inclines. Vertical conveying is also possible if the belts are
arranged top surface to top surface gripping the articles between
them.
147
PKR 2
Height of surface
Pitch
PKR 3
Temperature
resistance
(C)
Hardness
(Shore A)
Oil
resistance
Marking
SBR-NR/light
- 40 to + 70
55
no
no
CR/black
- 25 to + 100
65
limited
yes
Groove
width
(mm)
Pattern
Standard
(mm)
maximal
(mm)
(mm)
PKR 0
PKR 1
10
PKR 2
PKR 3
3.7
Design/Colour
Table 75
Section
3V/9J
5V/15J
8V/25J
SPB
Length
designation
500 1 400
500 3 550
1 000 4 750
9x 8
15 x 13
25 x 23
16.3 x 13
9.9
15.1
25.5
15.6
A/HA
13 x 8
9.9
B/HB
C/HC
17 x 11
22 x 14
13.0
16.2
148
Length
(mm)
1 400
1 400
2 540
2 400
1 400
2 850
1 400
2 286
3 556 La
9 017 La
12 065 La
6 000 Ld
5 000 Li
8 000 Li
7 100 Li
7 100 Li
Max.
production length
(mm)
PKR 0
PKR 1
PKR 2
PKR 3
4 250
10 000
15 000
6 000
8 000
on request
10 000
12 000
Pattern type
PKR 0
PKR 1
PKR 2
Table 76
PKR 5
Table 77
Pattern
Pitch
(mm)
Groove
width
(mm)
10
13
Standard
(mm)
maximal
(mm)
PKR 0
PKR 1
PKR 2
PKR 5
Temperature
resistance
( C)
Hardness
(Shore A)
Oil
resistance
Marking
- 40 to + 70
- 25 to + 100
55/65*
65
no
limited
no
yes
Design/Colour
SBR-NR/light
CR/black
Table 78
Table 79
Top surfaces 3 or 5 mm
within the standard height
StanSection dard
height
(mm)
Pattern type
Standard
inside length
(mm)
PKR 0
Pattern type
Standard
inside length
(mm)
PKR 0
PKR 2
Minimum
quantitiy
8.0 1 200
50001)
18 pcs.
31 pcs.
3 550 10 0001)
10
B/17 11.0
1 200
2 001
2 0001)
7 1001)
15 pcs.
15 pcs.
50 pcs.
42 pcs.
2 850 21 0001)
10
12.5
1 850
2 001
2 0002
8 0002)
13 pcs.
13 pcs.
21 pcs.
36 pcs.
3 550 21 0001)
C/22 14.0
1 850 2 0002)
2 001 10 0002)
12 pcs.
12 pcs.
57 pcs.
48 pcs.
3 550 21 0001)
16.0
1 850 2 0002)
2 001 10 0002)
11 pcs.
11 pcs.
51 pcs.
42 pcs.
2 850 21 0001)
2 850 12 5002
D/32 20.0 2 850 12 5002)
3)
9 pcs.
8 pcs.
22 pcs.
8 pcs.
2 850 21 0001)
on request
on request
4 000 21 0001)
A/13
20
25
E/40 25.0
When ordering, please state the overall height of the V-belt including top surface.
This is indicated by the section designation as follows.
= 17 x 11
= 17 x 14
= 17 x 16
149
PKR 0
PKR 1
PKR 2
Table 80
Section
PKR 0
CR/red brown
PKR 0
SBR-NR/light coloured
PKR 1
PKR 2
Z/10
A/13
B/17
C/22
25
D/32
S = Standard; P = Polyester
Table 81
Table 82
Pattern types
PKR 0
PKR 1
A/13;
B/17;
C/22
Pitch
Max.
(mm)
(mm)
10
Hardness
(Shore A)
Oil
resistance
Marking
CR/red brown
- 25 to + 100
50
limited
no
SBR-NR/light
coloured
- 40 to + 70
45
no
no
PKR 0
PKR 1
25; D/32
10
PKR 2
150
Temperature
resistance
( C)
Design/
Colour
NR/red brown
- 40 to + 70
48
no
no
SBR-NR/light
coloured
- 40 to + 70
45
no
no
CR/red brown
- 25 to + 100
50
limited
no
CR/black
- 25 to + 100
68
limited
yes
Section
Width x Height
(mm)
8
Z/10
A/13
B/17
C/22
8x 5
10 x 6
13 x 8
17 x 11
22 x 14
Length
of roll
(m)
Diameter
50
50
50
50
25
(mm)
Length
of roll
(m)
Weight
( kg/m)
2
3
4
5
6
7
8
10
12
15
200
200
200
200
100
100
100
100
50
50
0.004
0.009
0.016
0.024
0.035
0.048
0.064
0.096
0.132
0.211
200
300
500
700
mm
mm
mm
mm
Supergrip
Linatex
HV 2-Laminate
Form 1
Form 2
Section
Width x
Hight
(mm)
Length
of roll
(m)
Form
Section
Length
of roll
(m)
8
Z/10
A/13
B/17
C/22
8x 5
10 x 6
13 x 8
17 x 11
22 x 14
50
50
50
50
25
1
2
1
2
1
2
A/13
A/13
B/17
B/17
C/22
C/22
25
25
25
25
25
25
151
Table of Standards
109 Sheet 1
109 Sheet 2
111
111 Sheet 2
2211 Sheet 1
2211 Sheet 2
2211 Sheet 3
2215
DIN
DIN
DIN
DIN
2216
2217 Sheet 1
2217 Sheet 2
2218
DIN 7716
DIN 7722
DIN 7867
DIN/ISO 5210
DIN/ISO 5294
DIN/ISO 5296
22
63
99
100
155
254
255
ISO 1081
ISO 1604
ISO
ISO
ISO
ISO
1813
2230
2790
3410
ISO 4183
ISO 4184
ISO 5256
ISO 5287
ISO 5288
ISO 5289
ISO 5290
ISO 5291
152
ISO 5292
ISO 9982
Australia
ISO
ISO
ISO
ISO
ISO
5294
5295
5296
8370-1
8370-2
ISO/DIS 8419
ISO/CD 9010
ISO/CD 9011
ISO 9563
ISO 9980
ISO 9981
ISO 9982
Austria
NORM M 6504
NORM M 6506
NORM M 6516
NORM M 6516
Appendix
NORM DIN 2215
Belgium
NBN E 24-001
NBN E 24-002
NBN E 24-003
NBN E 24-004
NBN E 24-005
NBN E 24-006
NBN E 24-007
NBN E 24-009
NBN E 24-010
NBN E 24-011
Denmark
DS/ISO 254
DS 2104
DS 2106
DS 2107
DS 2108
DS/ISO 5287
DS/ISO 5289
DS/ISO 5294
DS/ISO 5296
Finland
SFS 2491
SFS 2492
SFS 2493
Table of Standards
SFS
SFS
SFS
SFS
SFS
SFS
SFS
SFS
2494
2495
2496
3523
3524
3525
3526
3527
France
NF E 24-002 ISO 254
NF E 24-209 ISO 255
NF E 24-211 ISO4183
NF E 24-212 ISO4184
NF E 24-213
NF E 24-220/ISO5290
NF E 24-232/ISO1604
NF E 24-301/ISO5296
NF E 24-302/ISO5294
NF E 24-402/ISO9982
NF T 47-104
NF T 47-123
United Kingdom
BS 3733
BS 3790
BS AU 150
Spain
UNE
UNE
UNE
UNE
UNE
UNE
UNE
UNE
UNE
18006
18007
18009
18077
18086
18102
18107
18108
18117
Sweden
SMS
SMS
SMS
SMS
SMS
SMS
SMS
SMS
SMS
SMS
SMS
SMS
SMS
979
2475
2476
2477
2479-2485
2489
2490
2491
2492
2493
2494
2500
2516
SMS 2517
SMS 2518
SMS 2565
SMS 2566
SMS 2567
Israel
S.I. 429
Switzerland
VSM 15425
Italy
UNI 5265
UNI 5266
UNI 7509
Japan
JASO E 105/106
JASO E 107/108
JIS B 1854
JIS B 1855
JIS K 6323
Netherlands
NEN 1725
NEN 1727
Endless wedge belts and corresponding pulleys; dimensions for sections SPZ; SPA and SPB
Endless V-belts and corresponding pulleys; dimensions
for sections Y; Z; Z; B; C; D; E
In addition the ISO Standards apply.
Poland
PN-66 M 85201
VSM 15426
USA
RMA/MPTA IP-20
RMA/MPTA IP-21
RMA/MPTA IP-22
RMA/MPTA IP-23
RMA/MPTA IP-24
RMA/MPTA IP-25
RMA/MPTA IP-26
ASAE S 211.
SAE J636b
Yugoslavia
JUS
JUS
JUS
JUS
JUS
JUS
JUS
G.
G.
G.
G.
G.
G.
G.
E2.053
E2.054
E2.055
E2.057
E2.063
E2.064
E2.065
153
Data Sheet
for Calculation/Check of Drive
.
.
Company
Optibelt GmbH
Corveyer Allee 15
37671 Hxter/Germany
Tel. +49 (0 )52 71/ 62 -0
Fax +49 (0 )52 71/ 6 22 00
info@optibelt.com
www.optibelt.com
(stamp)
Fitted with:
For test
New drive
Existing drive
Number
Prime Mover
Type
__________________________
Type
________________________
Start:
loaded
unloaded
Nature of load::
constant
pulsating
_______________________________
per hour
per day
per minute
per hour
Power:
Manufacturer
Driven Machine
Method of starting
Size
P normal _______________________________________ kW
shock
Rating:
P normal _________________________________ kW
P maximal ______________________________________ kW
P maximal _______________________________ kW
Speed
Position of shafts:
horizontal
n2 ____________________________________ r.p.m.
n2 min __________________________________ r.p.m.
vertical
<) _____________________
angled
dd1
_______________ mm
da1
dd2
________________ mm
_______________ mm
da2
________________ mm
__________________
Centre distance
a _______________ mm
Tension/guide pulleys:
___________
imax __________________
amin
________ mm
amax _____________ mm
inside
outside
dd
mm
V-Pulley
da
mm
Flat pulley
fixed
________________________________ C minimum
________________________________ C maximum
Exposure to oil
___________________________
water
(e.g. spray)
acid
__________________________________
dust
Special conditions: Where the drive is subjected to unusual conditions (e.g. inside or outside idler
pulleys, three or multi-pulley drives, as well as drives with reverse rotational
direction, sketches are required. Please use the back of this data sheet for sketches.
154
Drive description:
155
Data Sheet
for Calculating/Checking Conveyor Systems
.
.
Company
Optibelt GmbH
Corveyer Allee 15
37671 Hxter/Germany
Tel. +49 (0 )52 71/ 62 -0
Fax +49 (0 )52 71/ 6 22 00
info@optibelt.com
www.optibelt.com
(stamp)
For one off use
New drive
Existing drive
Fitted with:
Number
Section length
Prime Mover
Type
________________________________________
________________________
_______________________________
Start
Power:
V-pulleys
Flat pulleys
plain
ball
da _____________________ mm
under load
unloaded
Support rails
Supporting pulleys
Bearings
per hour
Material
V-grooved
flat
______________________________________
per day
P normal _______________________________________ kW
P maximum _____________________________________ kW
Material to be conveyed
Type
round
rough
________________________________________
sharp
yes
smooth
Conveyed
horizontally
no
Maximum allowable shaft loading Sa max _______________ Newton
Datum or autside diameter of the driver pulley:
dd1
_______________ mm
da1
vertically
<) ____________________
inclined
downwards
upwards
________________ mm
Motion
continuous
cycled
collected
da2
________________ mm
Exposure to oil
______________________
water
(e.g. spray)
acid
Position of shafts:
dust
(type)
horizontal
angled
vertical
<) _____________________
____________________________
________________________________
yes
no
mm __________ + mm
Tension/guide pulleys:
inside
outside
dd ______________________ mm
156
Operating Conditions
da _____________________ mm
dd2
No part of this publication may be reproduced without the prior permission of the publishers.
Copyright infringement will be prosecuted. Errors excepted.
The Optibelt offer is aimed exclusively at specialist distributors. Optibelt recommends that its products be used exclusively according to the instructions in the Optibelt
documentations. Optibelt will not be held responsible it the products are used in any application for which it was not designed or manufactured. Optibelt would also like to point
out its General Terms of Business.
157
optibelt VB
Classical belts to BS 3790
and DIN 2215
optibelt MARATHON 1
Automotive fan belts raw edge,
moulded cogged, maintenance free
optibelt KB
Kraftbands
optibelt PKR
Endless V-belts with patterned top surface
DIN 2215
optibelt SUPER VX
Variable speed belts
moulded cogged raw edge
optibelt DK
Double section V-belts DIN 7722
optibelt ZR/HTD/ZRK
Timing belts
optibelt OMEGA
Timing belts
optibelt ZRM/ZRP/ZRL/
Optiflex
Polyurethane timing belts and open
ended timing belting
optibelt RB/RBK
Ribbed belts
optimax HF
Endless flat belts
optimat OE
Open ended V-belting, punched
DIN 2216
optibelt LB
Link belting
optibelt RR
Round plastic belting
optibelt KK
Plastic V-belting
optibelt KS
V-grooved pulleys
optibelt ZRS
Timing belt pulleys
optichain RK/RKB/KTR
Roller chain
Chain sprockets
optibelt CE
Clamping bushes
optibelt SK
High performance wedge belts to
BS 3790, DIN 7753 Part 1 and
RMA/MPTA