S- 80 /2012

M.E. (2008 - Course ) Examination, December,2012

UNIVERSITY OF PUNE
EXAMINATION CIRCULAR No. 80 of 2012 Programme of the M.E. (Sem. I & II)2008 Course(All Branches) Civil, Civil( Environment Engg.), Civil (Water Resoruces and Environmental Engineering), Mechanical, Mechanical (Mechatronics) ,Mechanical ( Automotive Engg), Mechanical (Energy Engineering), Mechanical [Computer Aided Design, Manufacture & Engineering (CADME)], Electrical, Electrical (Power Electronics & Drives),Electronics & Telecom., Electronics & Telecom.(Signal Processing), Electronics & Telecom. (Communication Networks),Electronics, Production Engg., Production (CAD/CAM) , Computer Engg/Computer Networks, Chemical, Chemical( Environmental Engg.),Petroleum, Information Technology, Industrial Engg, Instumentation & Control (Process Instru. & Biomedical Instru.), Polymer, Printing Engg. Examination, December - 2012. Instructions : 1.

Candidates are required to be present at the respective place of examination fifteen minutes before the time fixed for the first Paper & ten minutes before the time of each subsequent Paper. 2. Candidates are forbidden from taking any material into the examination hall that can be used for malpractice at the time of examination. 3. Use of Non-programmable Electronic Calculator is only allowed. 4. No request for any Special Concession, such as change in time or any day fixed for the University examination, on religious or any other ground shall be granted.

C:\Documents and Settings\Administrator\Desktop\ME 2008 Course - Dec.2012.docPage 1 of 30

5.
Sr. No. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42.

The Centre and Place of the examination of respective branches will be as follows :
Name of the Colleges Govt. C.O.E, Shivajinagar, Pune-411005 M.I.T COE, Paud Road., Pune 38. V.I.T., C.O.E. Bibvewadi, Pune-411037 P.I.C.T. C.O.E. Pune 411043 P.V.G.s C.O.E & Tech., Pune-411009 Dr. D. Y. Patil C.O.E Akurdi, Pune 411044 Cummins C.O.E,Karvenagar,Pune 411052 AISSMS, COE Pune 411001. Sinhgad Inst.Tech. C.O.E.Vadgaon Bk., Pune -41 R.Shahu C.O.E, Tathawade, Pune-411033 P.E.S'S Society C.O.E.. Pune 411005 M.A.E Alandi,C.O.E ., Dist: Pune M.I.T (Women) COE, Paud Road., Pune 38. SAE, C.O.E. Kondhawa (BK) Pune 48. D.Y. Patil I.E.T. C.O.E. Pimpri , Pune 411018 G.H. Raisoni, C.O.E Wagholi, Pune G.S. Moze, C.O.E., Balewadi, Pune- 411045 Sinhgad Inst. Of Tech.,C.O.E. Lonavala S.K. Navale, C.O.E.Vadgoan Bk, Pune 41 V.P.C.O.E. MIDC, Baramati, Dist. Pune P.C.M.C. C.O.E. Nigdi, Pune Siddhant C.O.E.. Sudumbare, Pune P.V.P. I.T.C.O.E. Bhavdhan Pune J.S.P.M.s Imperior C.O.E. Wagholi, Pune G.H.Raisoni C.O.E. & Tech. Wagholi , Pune J.S.P.M. Jayawantrao Sawant College of Engineering, Hadapsar, Pune MMM College of Engineering, Karvenagar, Pune Vishwakarma Institute of Information Technology, Kondhwa, Pune Zeal Education Soceitys Dnyanganga College of Engineering, Narhe, Pune Dhole Patil College of Engineering, Wagholi, Pune JSPM Bhivrabai Sawant Inst. Of Tech. & Res. ( for Women), Wagholi, Pune K.J.College of Engineering, Pisoligaon, Pune Sharadchandra Pawar College of Engineering, Dumbarwadi, Tal.Junnar, Dist. Pune Dr.D.Y.Patil College of Engineering, Ambi Alard College of Engineering & Management, Mulshi Dr.D.Y.Patil Inst. Of Engg. & Tech., Ambi Samanvay Pratishtahn Inst. Of Knowledge College of Engineering, Pimple-Jagtap Dattakala Group of Inst. Faculty of Engineering, Swami Chincholi Bhivrabai Sawant College of Engineering, Narhe, Pune Dr.D.Y.Patil School of Engineering, Chahroli, Lohgaon, Pune S.I.T. Rasiklal Dhariwal College of Engineering, Warje S.I.T. S.K.N. Inst. Of Tech. & Sci., Kusgaon, Lonwala Centre / Place

D.Y. Patil College of Engineering, Pimpri, Pune 18 (All students of Pune Centre ONLY FOR Civil, Mechanical, Computer, Computer Networks Branches)

P.V.G.s College of Engineering,& Technology, Pune-411009. (All students of Pune Centre for All Branches OTHER THAN Civil, Mechanical, Computer, Computer Network Branches)

C:\Documents and Settings\Administrator\Desktop\ME 2008 Course - Dec.2012.docPage 2 of 30

43. 44. 45. 46. 47. 48. 49.

Flora Inst. Of Tech., Khopi S.I.T. N.B.N. Sinhgad Technical Inst. Campus, Ambegaon (Bk), Pune Dr.D.Y.Patil School of Engineering Academy, Ambi Indira College of Engineering, Tathawade, Pune S.I.T. Sinhgad Institute of Tech. & Sci., Narhe, Pune Trinity College of Engineerig, Pisoli, Pune N.B.Navale College of Engineering, Kedgaon, Daund

C:\Documents and Settings\Administrator\Desktop\ME 2008 Course - Dec.2012.docPage 3 of 30

Ahmednagar Center
Sr. No. 1. 2. 3. 4. 5.

Name of the Colleges Pravara Rural College of Engineering, Loni College of Engineering, Kopargaon Amrutvahini C.O.E, Sangamner. Pad. Dr. V.Vikhe Patil College of Engineering, Viladghat, Ahmednagar Vishwabharati College of Engineering, Jamkhed Rd., Sarola Baddi, Dist. Ahmednagar

Centre / Place All Branches at Pravara Rural College of Engineering, Loni, Tal. Rahata, Dist. Ahmednagar.

Nashik Center

Sr. No.
1. 2. 3. 4. 5.

Name of the Colleges

KK Wagh College of Engineering, Nashik. SND College of Engg. Yeola, Dist.Nashik. Matoshri Edu. Soc.s Coll. of Engg. & Res. Center, Dist. Nashik. Sandip Foundation Inst. of Tech. & Res. Center, Dist. Nashik. K. G.N. Sapkal College of Engineering,. Anjneri, Nasik Sir Vishveshwaraiya Coll. of Engg., Chincholi, Tal. Sinner, Dist. Nashik. NDMVP B.G.Thakare College of Engineering, Nashik M.E.T. Inst. Of Engineering, Adgaon, Nashik S.N.J.B. College of Engineering, Neminagar, Chanwad

Centre / Place

6. 7. 8. 9.

All Branches at K.K. Wagh College of Engineering, Nashik.

C:\Documents and Settings\Administrator\Desktop\ME 2008 Course - Dec.2012.docPage 4 of 30

6.

The Written Examination will be conducted in the following order : ME Civil 2008 Course Sem. I Time : 2.30 p.m. to 5.30 p.m.

Day and Date

Construction Manget. 2008 Course

Geotechnical 2008 Course

Hydraulics 2008Course

Structure 2008 Course

Saturday, 01.12.2012

*Mathematics (501101)

Numerical Methods (501201)

Computational Methods in Hydraulics (501301) Water Resource Planning & Management (501302) Fluid Mechanics (501303)
Elective-I (501304) a) Remote Sensing & GIS in Water Resource Engineering b) Dam Engineering c) Systems Techniques in Water Resource Engineering

*Structural Mathematics (501401)

Tuesday, 04.12.2012

*Management & Project Planning in Construction (501102)

System Approach to Management & Development of Human Resources (501202)

*Advanced Soild Mechanics (501402)

Friday, 07.12.2012

*Construction Technology (501103)

Engineering Behavior of soils (501203)

*Structural Dynamics (501403)

Tuesday, 11.12.2012

*Elective-I (501104) *a) New Construction Materials *b)Disaster Management *c) Repairs Rehabilitation, Retro. of Structures *d) Construction Safety

Elective-I (501204) a) Applied Soil Mechanics b) Site Investigations & Ground Improvement c) Rock Mechanics & Tunnelling d) Shallow and Deep Foundation

*Elective-I (501404) *a) Advanced Design of concrete Structures *b) Structural Design of Concrete Bridges *c) Design of Composite Construction *d) Design of Foundations

Thursday, 13.12.2012

*Elective-II (501105) *a) Resources Management *b) TQM in Construction *c) Value Engineering *d) Project Risk Analysis & Mitigation Techniques

Elective-II (501205) a) Soil Stabilization b) Soil Structure Interaction c) Geo-environmental Engineering d) Earth Pressure & Retaining Structures

Elective-II (501305) a) Closed Conduit Flow b) Hydro Informatics & Simulation c) Hydropower

Elective-II (501405) *a) Advanced Design of Metal Structures *b)Structural Design of Steel Bridges *c)Plastic Analysis & Design of Steel Structures *d) Design of Industrial Steel Structures

* Note - Papers marked are of four hours duration (between 2-30 p.m. to 6-30 p.m.)

C:\Documents and Settings\Administrator\Desktop\ME 2008 Course - Dec.2012.docPage 5 of 30

ME Civil 2008 Course Sem. II Time : 2.30 p.m. to 5.30 p.m. Day and Date Construction Management 2008 course Monday, 03.12.2012 *Construction Contracts Administration & Management(501108) *Project Economics & Financial Mgt. (501109) Finite Element Methods in Geotechnical Engineering (501208) Reinforce Earth and Geo-synthetics (501209) Foundation Design and Detailing (501210) Geotechnical 2008 Course Hydraulic Engineering 2008 Course Open Channel Hydraulics (501308) Structure 2008 Course

*Theory of Plates and Shells (501408)

Wednesday, 05.12.2012

Hydrology (501309)

*Finite Element Method (501409)

Saturday, 08.12.2012

*Operation (501110)

Research

Sediment Transport & River Mechanics (501310) Elective III (501311)

a) Irrigation & Drainage b) Coastal Engineering c) Water Management & Conveyance System

*Management in Structural Engineering (501410)

Wednesday, 12.12.2012

*Elective III (501111)

*a) Advanced Construction Technology *b) Infrastructure Development *c) International Contracting

Elective III (501211)

a) Slope Stability & Earth Dams b) Geotechnical Earthquake Engineering c) Foundation of Offshore Structures

*Elective III (501411) *a) Earthquake Resistant Design of Structures *b) Structural Stability *c) Structural Reliability *d) Non-linear Analysis of Structures

Friday, 14.12.2012

*Elective IV (Open) (501112) a) Trust areas in Project Management

Elective IV (Open) (501212)

Elective IV (Open) (501312) a) Irrigation & Drainage

*Elective IV (Open) (501412) a) *Biomaterials & Bio-Mechanics b) Mechanics of Modern Materials c) Theory of Plasticity d) Optimization Techniques

*Note - Papers marked are of four hours duration (between 2-30 p.m. to 6-30 p.m.)

C:\Documents and Settings\Administrator\Desktop\ME 2008 Course - Dec.2012.docPage 6 of 30

ME Civil (Environmental Engg.)(2008 Course) Sem. I Time : 2.30 p.m. to 5.30 p.m. Saturday, 01.12.2012 Tuesday, 04.12.2012 Friday, 07.12.2012 Tuesday, 11.12.2012

Numerical Methods and Applied Statistics ( 501501) Air Pollution and Control ( 501502) Physico- Chemical Process for Water and Waste Water Treatment (501503)
Elective I( 501504)

a)Air and Water Quality Modeling b)Environmental Legislation and Management System c)Environmental Impact Assessment and Management
Elective II(501505)

Thursday, 13.12.2012

a)Occupation Safety and Health b)Principles and Design of Biological Treatment System c)Environmental Risk Assessment and Management
ME Civil (Environmental Engg.)(2008 Course) Sem. II Time : 2.30 p.m. to 5.30 p.m.

Monday, 03.12.2012 Wednesday, 05.12.2012 Saturday, 08.12.2012 Wednesday, 12.12.2012

Industrial Waste Water Management ( 501508) Environmental Chemistry and Microbiology (501509) Solid Waste and Hazardous Waste Management (501510)
Elective III (501511)

a) Ground Water Contamination and Pollution Transport b) Agricultural Pollution Control and Environmental Biotechnology c) Environmental Sanitation
Elective-IV(501512)

Friday, 14.12.2012

Open Elective a) Ground Water Contamination and Pollution Transport b) Environmental Sanitation

C:\Documents and Settings\Administrator\Desktop\ME 2008 Course - Dec.2012.docPage 7 of 30

ME Civil (Water Resources & Environmental Engineering)(2012 Course) Sem. I Time : 2.30 p.m. to 5.30 p.m. Saturday, 01.12.2012 Monday, 03.12.2012 Wednesday, 05.12.2012 Friday, 07.12.2012

Environmental Chemistry & Microbiology (501601) Environmental Management (501602) Advance Fluid Mechanics (501603)
Elective I (501604)

a) Ground Water Contamination & Transport b) Hydrology & Groundwater c ) Air Pollution Engineering d) Solid & Hazardous Waste Management
Elective-II (501605)

Tuesday, 11.12.2012

a) Unit Operation in Environmental Engineering b) Advance Water Treatment & Water Supply Engineering c) Remote Sensing & GIS System for Water Resources Management d) Planning and Management of Water Resources

C:\Documents and Settings\Administrator\Desktop\ME 2008 Course - Dec.2012.docPage 8 of 30

Day & Date

Saturday, 01.12.2012 Tuesday, 04.12.2012 Friday, 07.12.2012 Tuesday, 11.12.2012

ME Mechanical 2008 Course Sem. I Time : 2.30 p.m. to 5.30 p.m. Heat Power Engineering Design Engineering 2008 Course 2008 Course

Numerical Methods in Thermal & Fluid Engineering (502101) Advanced Thermodynamics (502102) Technology & Financial Management (502103) (Common to Design & Mechatronics)
Elective-I (502104)

Mathematical Modeling & Analysis (502201) Advanced Stress Analysis (502202) Technology & Financial Management (502203)

Elective-I (502204)

a) Performance Assessment of Mechanical Equipments b) Refrigeration Technology c) Energy Conservation & Management d) Convective Heat Transfer Analysis
Elective-II (502105)

a) Instrumentation & Automatic Control b) Advanced Material Science c) Optimization Techniques

Thursday, 13.12.2012

Elective-II (502205)

a) Internal Combustion Engines b) Advanced Air Conditioning & Heating & Ventilation c) Conventional Power Plants d) Advanced Gas Dynamics

a) Material Handling Equipment Design b) Process Equipment Design c) Robotics

ME Mechanical 2008 Course Sem. II Time : 2.30 p.m. to 5.30 p.m. Monday, 03.12.2012 Wednesday, 05.12.2012 Saturday, 08.12.2012

Advanced Heat Transfer (502108) Measurement Techniques and Data Analysis (502109) Advanced Fluid Mechanics (502110)

Vibration & Noise Control (502208) Advanced Machine Design (502209) Analysis & Synthesis of Mechanisms (502210)

Wednesday, 12.12.2012

Elective III (502111)

Elective III (502211)

a) Internal Combustion Engines fuels b) Cryogenic Engineering c) Non Conventional Power Plants
Elective IV (502112)

a) Reliability Engineering b) Engineering Fracture Mechanics c) Computer Aided Engineering

Elective IV (502212)

Friday, 14.12.2012

a)Heat Exchanger System Design and Performance b)Computational Fluid Dynamics OPEN (SELF STUDY)** i)Computer Aided Engineering (Design)

a) Vehicle dynamics b) Industrial Tribology c) OPEN (SELF STUDY)**

C:\Documents and Settings\Administrator\Desktop\ME 2008 Course - Dec.2012.docPage 9 of 30

ME Mechanical (Mechatronics ) 2008 Course Sem. I Time : 2.30 p.m. to 5.30 p.m. Day and Date Saturday, 01.12.2012 Tuesday, 04.12.2012 Friday, 07.12.2012 Tuesday, 11.12.2012 M.E. Mechanical( Mechatronics) Sem- I

Applied Numerical Methods and Computational Techniques ( 502801) Mechanical of Electronic Measurements (502802) Technology and Financial Management (502103) (Common to Mechanical)
Elective - I((502804)

a) Design of Machine Elements b) Digital Signal Processing c) Advanced Material Science

Elective II(502805)

Thursday, 13.12.2012

a) Control Systems b) Theory of Machines and Mechanisms c) Instrumentation & Automatic Control
ME Mechanical ( Mechatronics) 2008 Course Sem. II Time : 2.30 p.m. to 5.30 p.m.

Monday, 03.12.2012 Wednesday, 05.12.2012 Saturday, 08.12.2012 Wednesday, 12.12.2012

Microcontrollers (502808) Industrial Automation ( 502809) Drives & Actuators ( 502810) Elective III ( 502811) a) Computer Aided Design b) Robotics c) Automotive Electronics Elective IV (502812) a)Embedded Systems b)Fuzzy Logic and Neural Networks c) Open (Self Study)

Friday, 14.12.2012

C:\Documents and Settings\Administrator\Desktop\ME 2008 Course - Dec.2012.docPage 10 of 30

ME Mechanical (Automotive Engineering )(2008 Course) Sem. I Time : 2.30 p.m. to 5.30 p.m. Saturday, 01.12.2012 Tuesday, 04.12.2012 Friday, 07.12.2012 Tuesday, 11.12.2012

Mathematical Modeling & Analysis (502201 ) Automotive Engine Design (502301 ) Technology and Financial Management (502103)

Elective I (502302) a) Advanced Heat Transfer b)Finite Element Method c)Advanced Hydraulics and Pneumatic Systems Thursday, Elective II (502303) 13.12.2012 a)Tribology and Preventive Maintenance b)Automotive Safety and Regulations c)Automobile Air Conditioning
ME Mechanical( Automotive Engineering) (2008 Course) Sem. II Time : 2.30 p.m. to 5.30 p.m.

Monday, 03.12.2012 Wednesday, 05.12.2012 Saturday, 08.12.2012 Wednesday, 12.12.2012

Automotive Fuels and Emissions ( 502306) Autoerotic (502307) Fundamentals of Vehicle Dynamics (502308) Elective III (502309) a)Noise Vibrations and Harshness b)Automotive Materials c)Vehicle Aerodynamics Elective IV (502310) a)Computational Fluid Dynamics b)Automotive Chassis Design c)** Open Elective (Self Study)

Friday, 14.12.2012

C:\Documents and Settings\Administrator\Desktop\ME 2008 Course - Dec.2012.docPage 11 of 30

ME Mechanical (Energy Engineering )(2012 Course) Sem. I Time : 2.30 p.m. to 5.30 p.m. Saturday, 01.12.2012 Monday, 03.12.2012 Wednesday, 05.12.2012 Friday, 07.12.2012

Advanced Engineering Mathematics (502501) Advanced Thermodynamics (502502) Energy Conversion Systems (502503) Elective I (502504) a) Nuclear Materials and Reactor Fundamentals b) Process Optimization c) Plant Operation, Dynamics and Control Elective II (502505) a) Electromechanical and Reactor Systems b) Process Integration c) Non Conventional Energy Sources

Tuesday, 11.12.2012

C:\Documents and Settings\Administrator\Desktop\ME 2008 Course - Dec.2012.docPage 12 of 30

ME Mechanical (Computer Aided Design Manufacture & Engineering) (2012 Course) Sem. I Time : 2.30 p.m. to 5.30 p.m. Saturday, 01.12.2012 Monday, 03.12.2012 Wednesday, 05.12.2012 Friday, 07.12.2012 Advanced Machine Design ( 520401) Mathematical Modeling (502402) Computer Aided Design ( 520403) Elective I (502404) a) Material for Engineering Applications b) Advanced Manufacturing Processes c) Customization of CAD/CAM Softwares d) CAD/CAM Practices in Metal Forming Elective II (502405) a) Finite Element Analysis b) Integrated Product Design & Development c) Computational Fluid Dynamics d) Robotics

Tuesday, 11.12.2012

C:\Documents and Settings\Administrator\Desktop\ME 2008 Course - Dec.2012.docPage 13 of 30

ME Electrical (2008 Course )Sem. I Time : 2.30 p.m. to 5.30 p.m. Day and Date Saturday, 01.12.2012 Tuesday, 04.12.2012 Friday, 07.12.2012 Tuesday, 11.12.2012 Thursday, 13.12.2012 Control System 2008 Course Advanced Mathematical Technique for Control System (503101) Process Control Management (503102) Nonlinear Control System (503103) Elective-I (503104) a) Automation & Robotics b) Modeling & Dynamic System Elective-II (503105) a) Advanced Topics in Control Systems b) Computer Aided Control Systems Design c) SCADA System & Applications Power System 2008 Course Computer Applications in power Systems (503201) Power Sector Economics, Management & Restructuring (503202) Power System Modeling (503203) Elective-I (503204) a) Digital Signal Processing & its Applications b) Advanced Power Electronics Elective-II (503205) a) Artificial Intelligence & its Application in Power System b) Renewable Energy Sources

ME Electrical (2008 Course) Sem. II Time : 2.30 p.m. to 5.30 p.m.

Multivariable & Optimal Control System (503108) Wednesday, System Identification & Adaptive Control 05.12.2012 (503109) Saturday, Advanced Digital Control Technique (503110)
08.12.2012 Wednesday, 12.12.2012 Elective III (503111)

Monday, 03.12.2012

Power System Dynamics (503208) Power System Planning & Reliability (503209) High Voltage Power Transmission (503210)
Elective III (503211)

a)Robust Control Systems b)Stochhastics Dynamical Systems c)Large Scale System

a)Digital Power System Protection b)Power Electronics Applications in Power Systems

Friday, 14.12.2012

Elective IV (503112)

Elective IV (503212)

a)Intelligent Control b)Advanced Drives & Control c)Open

a)Power Quality Assessment and Mitigation b)Partial Discharges in Electrical Power Apparatus c)Open

C:\Documents and Settings\Administrator\Desktop\ME 2008 Course - Dec.2012.docPage 14 of 30

ME Electrical (Power Electronics & Drives) (2008 Course) Sem. I Time : 2.30 p.m. to 5.30 p.m. Saturday, 01.12.2012 Tuesday, 04.12.2012 Friday, 07.12.2012 Tuesday, 11.12.2012

Modeling and Analysis of Electrical Machines ( 503301)

Energy Management and Power Quality in Electrical Drives ( 503302)

Power Electronic Devices and Circuits ( 503303)

Elective I ( 503304) a) DSP and its Applications in Electrical Drives b) Data Acquisition and Signal Conditioning c) Digital Simulation of Power Electronic Systems Elective II (503305) a) FACTS and HVDC b) Harmonics and their Mitigation

Thursday, 13.12.2012

ME Electrical (Power Electronics & Drives) 2008 Course Sem. II Time : 2.30 p.m. to 5.30 p.m. Monday, 03.12.2012 Wednesday, 05.12.2012 Saturday, 08.12.2012 Wednesday, 12.12.2012

Controlled Electrical Drives (503308) Power Electronic Applications ( 503309) Design of Power Electronic Systems (503310) Elective III (503311) a)Automation in Industrial Drives b)Computer Aided Design of Electrical Machines c)Microcontroller Applications Elective IV (503312) a) Artificial Intelligence in Electrical Drives b) Special Topics in Power Electronics and Drives c) Open Elective

Friday, 14.12.2012

C:\Documents and Settings\Administrator\Desktop\ME 2008 Course - Dec.2012.docPage 15 of 30

ME E & TC (2008 Course) Sem. I Time : 2.30 p.m. to 5.30 p.m. Day and Date Saturday, 01.12.2012 Tuesday, 04.12.2012 Microwave 2008 Course VLSI Embedded System 2008 Course

Electromagnetics & Antenna Theory (504222)

Analog & Digital CMOS IC Design (504181) Principles & Practices for IT Management (504182) Embedded System Design (504183)

Principles & Practices for IT Management (504182) (Common to VSLI, Electronics) Friday, RF Wave & Microwave Circuit Design 07.12.2012 (504223)
Elective-I (504224)

Tuesday, 11.12.2012

Elective-I (504184)

a) Applications of Microwaves to Radar & Satellite b) Digital Image processing & Analysis c) Communication Networks
Elective-II (504225)

a) ASIC Design & Modeling b) Nanotechnology c) Machine Intelligence

Elective-II (504185)

Thursday, 13.12.2012

a) Smart Antennas b) Speech Processing & Application c) Semiconductor Device Modeling & Technology

a) Reconfigurable Computing b) Memory Technologies c) VLSI EDA Tools

ME E & TC( 2008 Course) Sem. II Time : 2.30 p.m. to 5.30 p.m. Day and Date Monday, 03.12.2012 Wednesday, 05.12.2012 Saturday, 08.12.2012 Wednesday, 12.12.2012 Microwave 2008 Course VLSI Embedded System 2008 Course

Microwave Integrated Circuits (504228) Signal Processing for Wireless Communication (504229) Mobile Communication GSM and CDMA (504230)
Elective III (504231)

Real Time Operating Systems (504188) Embedded Signal Processing (504189) RF IC Design (504190)
Elective III (504191)

a)Fiber Optic Communication b)System Design c)EMI and EMC Techniques

Elective IV (Open) (504232)

a)Fault Tolerant System Design b)Biomedical Signals and Systems c)Advanced Digital System Design
Elective IV (Open) ( 504192)

Friday, 14.12.2012

Open Elective i))Software Project Management ii) Digital Signal Compression

a) Embedded Automotive Systems b) System on Chip (SoC) c) Software Defined Radio d) High Performance Computer Network (Comm. to I.T.)

C:\Documents and Settings\Administrator\Desktop\ME 2008 Course - Dec.2012.docPage 16 of 30

ME Electronics & Telecommunication ( Signal Processing )( 2008 Course)Sem. I Time : 2.30 p.m. to 5.30 p.m. Day and Date Saturday, 01.12.2012 Tuesday, 04.12.2012 Friday, 07.12.2012 Tuesday, 11.12.2012 Electronics & Telecommunication (Signal Processing)( 2008 Course) Sem. I

Liner Algebra & Random Processes ( 504501 ) Principles & Practices for I.T. Management ( 504182) ( Common to E.& TC, V.L.S.I. & Electronic ) Signal Processing Techniques (504502 )
Elective-I (504503)

a) Digital Image Processing b) Automotive Electronics c) Artificial Intelligence

Elective-II (504504)

Thursday, 13.12.2012

a) Bio-Medical Signal Processing b) Wireless & Mobile Communication c) Smart Antennas

ME Electronics & Telecommunication (Signal Processing) (2008 Course )Sem. II Time : 2.30 p.m. to 5.30 p.m. Monday, 03.12.2012 Wednesday, 05.12.2012 Saturday, 08.12.2012 Wednesday, 12.12.2012

Statistical Signal Processing (504507) Advanced Digital Signal Processing ( 504508) VLSI in Signal Processing (504509 )
Elective III: (504510)

a)Acoustic & Speech Processing b)Digital Signal Compression c)Multimedia Techniques

Elective IV (504511)

Friday, 14.12.2012

a)Radar & Satellite Signal Processing b)Operating Systems & Open Source Systems c)Computer Vision

C:\Documents and Settings\Administrator\Desktop\ME 2008 Course - Dec.2012.docPage 17 of 30

ME Electronics (2008 Course) Sem. I Time : 2.30 p.m. to 5.30 p.m. Day and Date Saturday, 01.12.2012 Tuesday, 04.12.2012 Friday, 07.12.2012 Tuesday, 11.12.2012 Digital System 2008 Course

Microelectronics (504195) Principles & Practices for IT Management (504182) Signal Processing Architectures (504196)
Elective-I (504197)

a) Fault Tolerant System Design b) Advanced Digital System Design c) Wireless & Mobile Technologies
Elective-II (504198)

Thursday, 13.12.2012

a) Machine Intelligence b) Advanced Computing Architectures c) Memory Technologies

ME Electronics( 2008 Course) Sem. II Time : 2.30 p.m. to 5.30 p.m.

Monday, 03.12.2012 Wednesday, 05.12.2012 Saturday, 08.12.2012 Wednesday, 12.12.2012

Embedded Systems (504201) Communication Network and Security (504202) Image Processing and Pattern Recognition (504203)
Elective III (504204)

a) Digital Systems using PLDs b) Biomedical Signals and Systems c) Embedded Video processing
Elective IV (OPEN) (504205)

Friday, 14.12.2012

a) Reconfigurable Computing b) Embedded Automotive Systems c) Digital Signal Compression

C:\Documents and Settings\Administrator\Desktop\ME 2008 Course - Dec.2012.docPage 18 of 30

ME E & TC ( Communication Networks)(2008 Course )Sem. I Time : 2.30 p.m. to 5.30 p.m. Saturday, 01.12.2012 Tuesday, 04.12.2012 Friday, 07.12.2012 Tuesday, 11.12.2012

Coding & Modulation Techniques (504601) Principles & Practices of IT Management (504182) Modeling & Simulation of Communication Network (504602)

Elective I (504603) a)Microwave and Antenna Theory b)Signal Detection and Estimation c) Ad-hoc Networks Thursday, Elective II(504604) 13.12.2012 a) RF MRMs b)Network Architecture & Design c)Computational Electromagnetics
ME E & TC ( Communication Networks) (2008 Course) Sem. II Time : 2.30 p.m. to 5.30 p.m. Monday, 03.12.2012

Wired and Wireless Networks ( 504607) Network Traffic Analysis and Qos ( 504608) Wireless System Design ( 504609)
Elective III ((504610)

Wednesday, 05.12.2012 Saturday, 08.12.2012 Wednesday, 12.12.2012

a)Wireless Sensor Networks b)Mobile Computing c)Network Security

Elective IV (504611)

Friday, 14.12.2012

a)Software Radio b)Neural Networks in Communication c)Hardware Platforms for Networking Applications

C:\Documents and Settings\Administrator\Desktop\ME 2008 Course - Dec.2012.docPage 19 of 30

ME Production Engineering (2008 Course) Sem. I Time : 2.30 p.m. to 5.30 p.m. Day and Date Saturday, 01.12.2012 Tuesday, 04.12.2012 Friday, 07.12.2012 Tuesday, 11.12.2012 Production Engineering

Mathematics and Statistics (511101) CAD/CAM/CIM (511102) Advanced Manufacturing Processes (511103)
Elective-I (511104)

a) Advanced Mechatronics b) Reliability & Failure Analysis c) Supply Chain Management d) Advanced Machine Tool Design
Elective-II (511105)

Thursday, 13.12.2012

a) Advance Robotics b) Sheet Metal Processing c) Tool and Die Design d) Engineering Economics & Accounting

ME Production Engineering (2008 Course )Sem. II Time : 2.30 p.m. to 5.30 p.m. Monday, 03.12.2012 Wednesday, 05.12.2012 Saturday, 08.12.2012 Wednesday, 12.12.2012

Material Technology (511108) Manufacturing Management (511109) Industrial Automation (511110)

Elective III (511111)

a) Plastics Processing b) Product Life Cycle Management c) Welding & Joining d) Surface Treatment processes
Elective IV (Open) (511112)

Friday, 14.12.2012

a) Optimization Techniques b) Research Methodologies c) Intellectual Property Rights & Product Design d ) Energy management

C:\Documents and Settings\Administrator\Desktop\ME 2008 Course - Dec.2012.docPage 20 of 30

ME Production (CAD/CAM) (2008 Course) Sem. I Time : 2.30 p.m. to 5.30 p.m. Saturday, 01.12.2012 Tuesday, 04.12.2012 Computer Aided Design (511201)

Computer Aided Manufacturing (511202)

Friday, 07.12.2012

Optimization Techniques (511203)

Tuesday, 11.12.2012

Thursday, 13.12.2012

Elective I ( 511204) a)Advanced Stress Analysis b)Tribology & Surface Engineering c)Industrial Robotics & Artificial Intelligence d)Concurrent Product Design Elective II (511205) a)Mechatronics b)Rapid Prototyping c)Energy Management d)CAD/CAM/CAE Software Development

ME Production (CAD/CAM) (2008 Course )Sem. II Time : 2.30 p.m. to 5.30 p.m. Monday, 03.12.2012 Wednesday, 05.12.2012 Saturday, 08.12.2012 Wednesday, 12.12.2012 Computer Integrated Manufacturing (511208) Finite Element Analysis (511209) Advanced Mathematics (511210) Elective III: ( 511211) a)Product Life Cycle Management b)Advanced Materials and Processing c)Manufacturing System Design d)Quality & Reliability Engineering Elective IV :(511212) a)Computer Aided Production Planning b)Technology Management c)Design of Experiments & Research Methodology d)Computational Fluid Dynamics

Friday, 14.12.2012

C:\Documents and Settings\Administrator\Desktop\ME 2008 Course - Dec.2012.docPage 21 of 30

ME Computer Engineering / Computer Networks (2008 Course) Sem. I Time : 2.30 p.m. to 5.30 p.m. Day and Date Saturday, 01.12.2012 Computer Engineering 2008 Course Computer Networks 2008 Course

Applied Algorithms (510101) (Common to Network Engineering)

NETWORK ENGINEERING Applied Algorithms (510301) Emerging Trends in Computer Architecture (510302) Principles & Practices for IT Management (510303)
Elective I (510304)

Tuesday, 04.12.2012

Emerging Trends in Computer Architecture (510102) (Common to Network Engineering) Friday, Principles & Practices for IT 07.12.2012 Management (510103) (Common to Network Engineering)
Elective-I (510104)

Tuesday, 11.12.2012

a)Advance Software Engineering b) Intelligent Systems c) Internet Routing Design d) Mobile computing
Elective-II (510105)

a)Internet Routing Design b)Advanced TCP / IP

Thursday, 13.12.2012

Elective - II(510305)

a) Information & Network Security b) Advanced compilers c) Web Services and SOA d) Embedded System Design

a)Wireless Technology b)Information Security Audit & Management

ME Computer Engineering / Computer Networks 2008 Course Sem. II Time : 2.30 p.m. to 5.30 p.m. Monday, 03.12.2012 Wednesday, 05.12.2012 Saturday, 08.12.2012 Wednesday, 12.12.2012

Distributed System (510108) High Performance Database System (510109) (Common to Network Engineering) Network Design, Modeling and Analysis (510110)
Elective III (510111)

Operating System Design (510308) High Performance Database Systems (510309)

Advanced Software Engineering (510310)

Elective III (510311)

a)Software Design and Architecture b)Pattern Recognition and Machine Vision c)Network Programming d)Advanced Internet Programming
Elective IV (510112)

a)Network Programming b)Network Design, Modeling and Analysis

Friday, 14.12.2012

Elective IV (510312)

a)Software Project Management b)Infrastructure Management c)Data Warehousing and Data Mining d)Open Elective (Self Study)

a) Infrastructure Management b) Convergence Technology c) Open Elective ( Self Study)**

C:\Documents and Settings\Administrator\Desktop\ME 2008 Course - Dec.2012.docPage 22 of 30

ME Chemical (2008 Course) Sem. I Time : 2.30 p.m. to 5.30 p.m. Day and Date Saturday, 01.12.2012 Tuesday, 04.12.2012 Friday, 07.12.2012 Tuesday, 11.12.2012 Chemical Engineering 2008 Course

Applied Statistics for Chemical Engineers (509101) Management of R & D in Chemical Industries (509102) Advanced Separation Processes (509103)
Elective-I (509104)

a) Computational Fluid Dynamics b) Process Design & Synthesis c) Advanced Thermodynamics d) Computer Aided Design
Elective-II (509105)

Thursday, 13.12.2012

a) Industrial Pollution Control b) Process Optimization c) Drugs & Pharmaceutical Engineering d) Fluidization Engineering

ME Chemical (2008 Course) Sem. II Time : 2.30 p.m. to 5.30 p.m. Monday, 03.12.2012 Wednesday 05.12.2012 Saturday, 08.12.2012 Wednesday, 12.12.2012

Process Modeling and Simulation (509108) Advanced Transport Phenomena (509109) Advanced Process Control (509110)
Elective III (509111)

a) Catalysis and Surface Phenomenon b) Advanced Reaction Engineering c) Mathematical Methods in Chemical Engineering d) Bioprocess Engineering
Elective IV OPEN (509112)

Friday, 14.12.2012

a)Catalysis and Surface Phenomenon b)Process Optimization c)Fuel Cells Technology d) Industrial Pollution Control e) Non Technology Theory & Application

C:\Documents and Settings\Administrator\Desktop\ME 2008 Course - Dec.2012.docPage 23 of 30

ME Chemical (Environmental Engg.)( 2008 Course) Sem. I Time : 2.30 p.m. to 5.30 p.m. Day and Date Saturday, 01.12.2012 Tuesday, 04.12.2012 Friday, 07.12.2012 Tuesday, 11.12.2012 Chemical Environmental Engg. 2008 Course

Applied Statistics for Environmental Engineers (509131) Environmental Geosciences (509132) Environmental Chemistry (509133)
Elective-I (509134)

a) Modeling of Environmental Systems b) Groundwater Contamination and Pollution Transport. c) Environmental Policies and Legislations d) Air and Noise Pollution Control
Elective-II (509135)

Thursday, 13.12.2012

a) Membrane Technology in Environmental Engineering b) Environmental Auditing and EMS c) Agricultural Pollution and control d) Environmental Impact Assessment and Economics
ME Chemical( Environmental Engg.) ( 2008 Course) Sem. II Time : 2.30 p.m. to 5.30 p.m.

Monday, 03.12.2012 Wednesday, 05.12.2012 Saturday, 08.12.2012 Wednesday, 12.12.2012

Wastewater Treatment & Design (509138) Solid Waste Management (509139) Industrial Waste Treatment (509140)
Elective III (509141)

a)Ecology and Risk Assessment b)Water Quality Modeling c)Modern Trends in Environmental Engineering d)Environmental Biotechnology
Elective IV (OPEN) (509142) Ground Water Contamination & Pollution Control

Friday, 14.12.2012

C:\Documents and Settings\Administrator\Desktop\ME 2008 Course - Dec.2012.docPage 24 of 30

M.E.(Petroleum Engineering)( 2008 Course )Sem. I Time : 2.30 p.m. to 5.30 p.m. Day and Date Saturday, 01.12.2012 Tuesday, 04.12.2012 Friday, 07.12.2012 Tuesday, 11.12.2012 Petroleum Engineering

Numerical Methods & Simulation in Petroleum Engineering (512101) Petroleum Reservoir Management (512102) Horizontal Multilateral & Intelligent Wells (512103)
Elective-I (512104)

a) Advanced Geological Methods in Petroleum Exploration & Development b) Reservoir Petro-physics c) Oil & Gas Field Development d) Petroleum Business Strategies & Risk Analysis
Elective-II (512105)

Thursday, 13.12.2012

a) Modern Completion Technology b) Well Design & Engineering c) Well Testing & Analysis d) Well control
ME( Petroleum Engineering )(2008 Course) Sem.II Time : 2.30 p.m. to 5.30 p.m.

Monday, 03.12.2012 Wednesday, 05.12.2012 Saturday, 08.12.2012 Wednesday, 12.12.2012

GIS and Computer Applications in Petroleum Industry (512108) Environmental Management Technology and Safety Measures (512109) Advanced Natural Gas Engineering (512110)
Elective III (512111)

a)Artificial Lift Techniques b)Advanced Stimulation Techniques c)Piping Design and Engineering
Elective IV OPEN (512112)

Friday, 14.12.2012

a)Technology of Coal Bed Methane b)Unconventional Hydrocarbon Resources and Development Strategies c)Advanced offshore Technology d)Open elective, can be taken from any branch of elective

C:\Documents and Settings\Administrator\Desktop\ME 2008 Course - Dec.2012.docPage 25 of 30

ME Information Technology (2008 Course )Sem. I Time : 2.30 p.m. to 5.30 p.m. Day and Date Saturday, 01.12.2012 Tuesday, 04.12.2012 Friday, 07.12.2012 Tuesday, 11.12.2012 Information Technology

Applied Algorithms (514421) Software Engineering Methodologies (514402) Advance Operating Systems (514403)
Elective-I (514422)

a) Software Architecture(514404)(A) b) Real Time & Embedded System (514404)(B) c) Bioinformatics (514422)(C)
Elective-II (514423)

Thursday, 13.12.2012

a) Information Assurance & Security (514405)(A) b) Network Programming (514422)(B) c) Geographical Information Systems (514405)(C)

M.E. Information Technology(2008 Course) Sem. II Time : 2.30 p.m. to 5.30 p.m. Monday, 03.12.2012 Wednesday, 05.12.2012 Saturday, 08.12.2012 Wednesday, 12.12.2012

Net centric Computing (514426) Advance Trends in Database Systems (514409) Management Trends in Information Technology (514427)
Elective III (514428)

a) Internet and Web Technologies ( 514411)(A) b) Advanced Topics in Operating Systems (514411)(B) c) Mobile Computing and M Commerce (514411)(C) d) User Interface Design (514428) (D)
Elective IV (514439)

Friday, 14.12.2012

a) Internet Routing Design (514428)(A) b) Advance Network Programming (514412)(B) c) High Performance Computer Networks (514412)(C) Open Elective II (Self Study)** i)Service Oriented Architecture (514429)(D)

C:\Documents and Settings\Administrator\Desktop\ME 2008 Course - Dec.2012.docPage 26 of 30

M.E Industrial Engineering (2008 Course) Sem. I Time : 2.30 p.m. to 5.30 p.m. Day and Date Saturday, 01.12.2012 Tuesday, 04.12.2012 Friday, 07.12.2012 Tuesday, 11.12.2012 Industrial Engineering

Economics (511201) Work Study & Ergonomics (511202) Optimization Techniques & Simulation Modeling (511203)
Elective-I (511204)

a) Marketing Management b) Human Resource Management c) Entrepreneurship Development d) World Class Manufacturing
Elective-II (511205)

Thursday, 13.12.2012

a) Facilities planning b) Network & Project Management c) Enterprise Resource Planning & Supply Chain Management d) System Engineering

ME Industrial Engineering( 2008 Course) Sem. II Time : 2.30 p.m. to 5.30 p.m.

Monday, 03.12.2012 Wednesday, 05.12.2012 Saturday, 08.12.2012 Wednesday, 12.12.2012

Reliability Engineering & Research Methodology (511208) Costing & Finance (511209) Productivity Management (511210)
Elective III (511211) ( a)Human Factors Engineering b)Process Planning & Manufacturing Engineering c)Management of Service Sector d)Industrial & Commercial law Elective IV OPEN (511212)

Friday, 14.12.2012

a)Organizational Behavior b)Operations Management c)Product Design & Intellectual Property Rights d) Environmental Engineering & Energy Management.

C:\Documents and Settings\Administrator\Desktop\ME 2008 Course - Dec.2012.docPage 27 of 30

Instrumentation & Control (Process Instru. Biomedical Instru.)(2008 Course) Sem. I Time : 2.30 p.m. to 5.30 p.m. Day and Date Instrumentation & Control (Process Instru. Biomedical Instru.) 2008 Course Sem I

Saturday, 01.12.2012 Tuesday, 04.12.2012 Friday, 07.12.2012 Tuesday, 11.12.2012 Thursday, 13.12.2012

Transducer Design (5061101) Mathematical Methods in Instrumentation (5061102) Communication Protocols for Instrumentation (5061103) Analytical Instrumentation (5061104)
Elective : I (5061105)

a)Industrial Automation (5061105) b)Building Automation (5061105) c)Geotechnical Instrumentation (5061105) Biomedical Instrumentation (5061201) a)Fundamentals of Biomedical Instrumentation(5061201) b)Introduction to Physiology and Anatomy (5061201)

ME Instrumentation & Control (Process Instru. Biomedical Instru.) 2008 Course Sem. II Time : 2.30 p.m. to 5.30 p.m. Monday, 03.12.2012 Wednesday, 05.12.2012 Saturday, 08.12.2012 Wednesday, 12.12.2012

Control System Design ( 5061108) Advanced Signal Processing ( 5061109 ) Organisational Behaviour & Management ( 5061110)
Elective : II (5061111)

a)Modern Control Theory ( (5061111) b)Mechatronics (5061111) c)Robotics (5061111) d)Advance Process Instrumentation Biomedical Instrumentation(5061204) a)Biosignal Processing ( 5061204) b)Rehabilitation Engineering (5061204)
Elective : III (5061112)

Friday, 14.12.2012

a)Advanced Process Instrumentation (5061112) b) Automobile Instrumentation ( 5061112) c)Open Elective Biomedical Instrumentation*(5061205) a)Bio-imaging Modality (5061205) b)Biophotonics (5061205)

C:\Documents and Settings\Administrator\Desktop\ME 2008 Course - Dec.2012.docPage 28 of 30

c) Open Elective

ME Polymer( 2008 Course) Sem. I Time : 2.30 p.m. to 5.30 p.m. Day and Date Saturday, 01.12.2012 Tuesday, 04.12.2012 Friday, 07.12.2012 Tuesday, 11.12.2012 Polymer 2008 Course Sem. I

Mathematical and Statistical Methods (509115) Principles of Management (509116) Polymer Processing and Testing (509117)
Elective I : (509118)

a) Polymer Reaction Engineering b) Transport Phenomena in Polymers c) Synthesis and Chemistry of Polymers
Elective II : (509119)

Thursday, 13.12.2012

a)Polymer Rheology b)Mold and Die Design c)Packaging Technology

ME Polymer (2008 Course) Sem. II Time : 2.30 p.m. to 5.30 p.m. Day and Date Monday, 03.12.2012 Wednesday, 05.12.2012 Saturday, 08.12.2012 Wednesday, 12.12.2012 Polymer 2008 Course Sem. II

Polymer Physics and Characterization (509122 ) Polymer Structure and Properties (509123 ) Processing and Mechanics of Composites (509124)
Elective III: (509125)

a) Science and Engineering of Fibers b) Polymer Product Design c) Specialty Polymer Materials
Elective - IV : (509126) (Open)

Friday, 14.12.2012

a) Paints and Adhesives Elective IV b) Elastomer Technology c) Open

C:\Documents and Settings\Administrator\Desktop\ME 2008 Course - Dec.2012.docPage 29 of 30

ME Printing (2008 Course) Sem. I Time : 2.30 p.m. to 5.30 p.m. Day and Date Saturday, 01.12.2012 Tuesday, 04.12.2012 Friday, 07.12.2012 Tuesday, 11.12.2012 Printing 2008 Course Sem. I

Probability, Statistics & Queueing Theory (508101) Printing Technology Management (508102) Modern Trends in Printing (508103)
Elective-I (508104)

a) Workflow Management in Printing Industry b) Printing & Packaging Materials c) Design of Experiments & Research Methodology
Elective-II (508105)

Thursday, 13.12.2012

a) Digital Printing b) Entrepreneurship in Printing & Allied Fields c) Quality Control Systems & Productivity

ME Printing (2008 Course) Sem. II Time : 2.30 p.m. to 5.30 p.m. Day and Date Monday, 03.12.2012 Wednesday, 05.12.2012 Saturday, 08.12.2012 Wednesday, 12.12.2012 Printing 2008 Course Sem. II

Print Media Communications ( 508108) Web Handling on Press (508109) Substrate and Ink (508110 )

Elective III : (508111 )

a) Multimedia Systems and Communication b)Total Productive Maintenance in Printing c) Press Finger Printing
Elective IV ( 508112 )

Friday, 14.12.2012

a)Open Elective (Self study) b)Advances in Converting and Packaging c)Analysis of Spot and Process inks

University of Pune Ganeshkhind, Pune-411007 Ref. No. XCT/1245 Date : 09/11/2012

Dr. Sampada Joshi Controller of Examinations

C:\Documents and Settings\Administrator\Desktop\ME 2008 Course - Dec.2012.docPage 30 of 30