Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 2K views

    Strato 35 Series and 70 Series :: ROAL Living Energy

    Uploaded by

    roalscribd
    The STRATO LED driver is designed to power LED lighting with a constant current output from 120-277V AC input. It has adjustable current output settings, dimming capability, overtemperature protection, and a compact design suitable for integration into light fixtures. The driver simplifies lighting design and lowers costs. It provides constant current power from a wide input voltage range directly to LEDs for commercial and industrial lighting applications.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Strato 35 Series and 70 Series :: ROAL Living Energy

    Uploaded by

    roalscribd
    2K views5 pages
    The STRATO LED driver is designed to power LED lighting with a constant current output from 120-277V AC input. It has adjustable current output settings, dimming capability, overtemperature protection, and a compact design suitable for integration into light fixtures. The driver simplifies lighting design and lowers costs. It provides constant current power from a wide input voltage range directly to LEDs for commercial and industrial lighting applications.

    Original Description:

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The STRATO LED driver is designed to power LED lighting with a constant current output from 120-277V AC input. It has adjustable current output settings, dimming capability, overtemperature protection, and a compact design suitable for integration into light fixtures. The driver simplifies lighting design and lowers costs. It provides constant current power from a wide input voltage range directly to LEDs for commercial and industrial lighting applications.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    2K views5 pages

    Strato 35 Series and 70 Series :: ROAL Living Energy

    Uploaded by

    roalscribd
    The STRATO LED driver is designed to power LED lighting with a constant current output from 120-277V AC input. It has adjustable current output settings, dimming capability, overtemperature protection, and a compact design suitable for integration into light fixtures. The driver simplifies lighting design and lowers costs. It provides constant current power from a wide input voltage range directly to LEDs for commercial and industrial lighting applications.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    STRATO

    LED Drivers 35W, Single output

    Features
    STRATO switch mode driver technology is designed to generate one constant current output from a wide range AC input. The size and performance of these products make them the ideal choice for LED lighting applications. Wide Range Input: 120, 240, or 277 VAC Constant Current Output for Powering LEDs Directly High Efficiency ~90% Compact Design Adjustable Output Current Settings Dimmable with (0-10VDC) Input Temperature Protection for LEDs Convection Cooled Long Life Wide Temperature Range ROHS Compliant

    Applications and Benefits


    STRATO is designed for directly powering LEDs in commercial & industrial lighting applications. The products extremely small form factor and high efficiency makes it suitable for integration into most light fixtures and standard electrical junction boxes. A host of integrated control features: Simplify Light Fixture Design Ease Safety Approval Cycles Lower Fixture Complexity and Cost

    +Dim -Dim

    Commercial Wall Dimmer (0 - 10VDC) Source Or Variable Resistor

    STRATOs versatile control features: A Temperature sensor (NTC thermistor) protects the LED from over-temperature. A 2 wire Dimming input provides both output trimming, and 10-100% Iout Dimming function.

    STRAT LED O Driver

    AC Input

    + LED

    LED Module

    Ts Temp Sensor

    -LED

    STRATO

    LED Drivers 35W, Single output

    Input and Output Specification


    Input Voltage: 120 / 240 / 277 VAC nominal 47-63 Hz Frequency Range Efficiency: Isolation: 90% typical * Meets UL60950-1 Reinforced/double insulation, NEC (Class 2) EN60598-1 Class II >0.90 * Output Voltage: Output Current: Output Current Regulation: Ripple Current: 7.5 to 73.5 VDC See Table 1 for details 0.50 to 1.75 Amps See Table 1 for details +/- 3% of max rating <45% (P-P) of maximum Output Current

    Input Power Factor:

    Input Harmonics: Meets EN61000-3-2, -3 * * @ Vin Nominal and >80% load for models >20W and >90% for models <20W

    Output Over-voltage, Over-Current and ShortCircuit Protection (hiccup), and over-temperature protection with auto recovery

    Performance Requirements: Meets the requirements of IEC 62384; control gear for LED modules Table 1 Absolute Maximum Driver Ratings

    Model number Package


    RSLD035 RSLD035 RSLD035 RSLD035 RSLD035 RSLD035 RSLD035 RSLD035 RSLD035 RSLD035 RSLD035 RSLD035 *RSLD035 RSLD035 RSLD035 RSLD035 RSLD035 *RSLD035 *RSLD035

    Iout Max mA
    500 700 700 700 700 700 700 700 1000 700 1150 1400 720 1240 1400 1750 1750 1300 1750

    Pout max watts


    36.75 39.2 36.8 34.3 31.9 29.4 27 24.5 31.5 22.1 32.2 34.3 17.6 25 29.4 30.6 24.5 18.2 18.4

    Vout (min) vdc


    52.5 40.0 37.5 35.0 32.5 30.0 27.5 25.0 22.5 22.5 20.0 17.5 17.5 14.5 15.0 12.5 10.0 10.0 7.5

    Vout (max) vdc


    73.5 56.0 52.5 49.0 45.5 42.0 38.5 35.0 31.5 31.5 28.0 24.5 24.5 20.1 21.0 17.5 14.0 14.0 10.5

    Vout No Load max vdc


    88.2 60.0 60.0 59.5 54.6 50.0 46.2 42.0 37.8 37.8 33.6 29.4 29.4 24.2 25.0 21.0 16.0 16.0 12.6

    Dash #
    -21 -16 -15 -14 -13 -12 -11 -10 -09 -9A -08 -07 -7A -6A -06 -05 -04 -4A -03

    * Certain models have lower output set points for compatibility with specific LED modules and arrays. As a result, these units will exhibit lower efficiency and lower power factor than specified herein. Refer to Strato Application Note #3, Output Voltage Range for proper device selection.

    Eu and RoW ROAL Electronics S.p.A Via Jesina 56/A 60022 Castelfidardo (AN) - Italy Tel:+39 071 721461 Fax:+ 39 071 72146 480

    Subject to Change without Notice

    North America ROAL Electronics USA, Inc. 701 Main St., Suite 405 Stroudsburg, PA18360 Phone: + 1 570 421 5750 Fax: +1 570 421 5687 DS1_Strato35 CC Plastic_Rev10 - Page. 2/5

    www.roallivingenergy.com

    STRATO

    LED Drivers 35W, Single output

    Controls
    Output Controls: Two dedicated inputs provide control and safety features.

    Dim: A dimming input can be used to adjust the output setting via a standard commercial wall dimmer, an external control voltage source (1 to 10VDC), or a variable resistor when using the recommended number of LEDs. The input permits 100% to 80% trimming and 100% to 10% dimming. This permits active control of the driver and may be used for trimming and dimming purposes. See Roal Strato Application Note 1 for details on functionality and compatibility with standard industry practices. Ts: The Temperature input may be connected to a 100k NTC thermistor. The thermistor should be located on the LED assembly to monitor its temperature. If the temperature exceeds a predetermined set point, the output current of the module is automatically reduced to regulate the temperature of the LED at a safe level. See Roal Strato Application Note 1 for details.

    Mechanical Details
    Packaging Options: I/O Connections: Mounting Details: Ingress Protection: Partially Encapsulated with ABS plastic body enclosure Flying leads, 18AWG on power leads, 20AWG on control leads, 152mm long, 105C Rated, Stranded, Stripped by approximately 9.5mm and tinned Universal Mounting Clips, and 6 mounting locations per package allow installer to choose the most suitable position for the mounting feet. IP64 Rated

    Universal Mount A Patent Pending Design

    Eu and RoW ROAL Electronics S.p.A Via Jesina 56/A 60022 Castelfidardo (AN) - Italy Tel:+39 071 721461 Fax:+ 39 071 72146 480

    Subject to Change without Notice

    North America ROAL Electronics USA, Inc. 701 Main St., Suite 405 Stroudsburg, PA18360 Phone: + 1 570 421 5750 Fax: +1 570 421 5687 DS1_Strato35 CC Plastic_Rev10 - Page. 3/5

    www.roallivingenergy.com

    STRATO

    LED Drivers 35W, Single output

    Outline Drawings
    Package: RSLD035
    Max Dimensions: 70mm x 40mm x 27mm, 2.76 x 1.57 x 1.06 Volume : 75.6 cm3, 4.59 in3 Mass : 142 grams, 5 Oz.

    Eu and RoW ROAL Electronics S.p.A Via Jesina 56/A 60022 Castelfidardo (AN) - Italy Tel:+39 071 721461 Fax:+ 39 071 72146 480

    Subject to Change without Notice

    North America ROAL Electronics USA, Inc. 701 Main St., Suite 405 Stroudsburg, PA18360 Phone: + 1 570 421 5750 Fax: +1 570 421 5687 DS1_Strato35 CC Plastic_Rev10 - Page. 4/5

    www.roallivingenergy.com

    STRATO

    LED Drivers 35W, Single output

    Environmental / EMC
    Operating Temperature: Operating Relative Humidity: Storage Temperature: Surface Temperature: Cooling: EMI and EMC: Conducted and Radiated EMI: EN55015 Class B, FCC 47CFR Part 15 Class B Susceptibility: EN61000-4-2, -3, -4, -5, -6, and -11 ANSI c62.41-1991 Category A1, 2.5kV Ringwave -30 to +90C case temperature without derating 5% to 95%, non condensing -40C to +85C Exposed surfaces <90C under all operating conditions Convection cooled

    Safety Agency Approvals


    UL60950-1 Recognized, UL8750 recognized Class 2 Output. Approved for damp locations. EN61347-2-13 electronic control gear for LED Modules ENEC Mark and CE Mark for EU. Notes Regarding European (ENEC) approvals: 1. 2. All models with Vout < 25VDC are SELV equivalent per EN61347-2-13. All models are considered Isolated Control Gear per EN61347-2-13

    Roal Electronics, S.p.A. may change product specifications and accordingly the information presented in this document. Customers are responsible for their products and applications using Roal Electronics, S.p.A. products. Roal Electronics, S.p.A. assumes no liability from the use of its products outside of specifications. No license is granted to any intellectual property rights by this document. ROAL ELECTRONICS, S.P.A. DISCLAIMS ALL REPRESENTATIONS AND WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

    Eu and RoW ROAL Electronics S.p.A Via Jesina 56/A 60022 Castelfidardo (AN) - Italy Tel:+39 071 721461 Fax:+ 39 071 72146 480

    Subject to Change without Notice

    North America ROAL Electronics USA, Inc. 701 Main St., Suite 405 Stroudsburg, PA18360 Phone: + 1 570 421 5750 Fax: +1 570 421 5687 DS1_Strato35 CC Plastic_Rev10 - Page. 5/5

    www.roallivingenergy.com

    You might also like