The document describes the SLI 50 inverter series, which provides 5000 watts of power in a compact 2U high, 19-inch rack mountable package. Key features include high efficiency up to 93%, true sine wave output, an LCD display for monitoring and configuration, and parallelable output. The inverters are suitable for telecom, IT, and industrial applications. Technical specifications include input voltage range of 40-60VDC, output power of 5000W, protections such as overvoltage and overcurrent protection, and environmental specifications.
The document describes the SLI 50 inverter series, which provides 5000 watts of power in a compact 2U high, 19-inch rack mountable package. Key features include high efficiency up to 93%, true sine wave output, an LCD display for monitoring and configuration, and parallelable output. The inverters are suitable for telecom, IT, and industrial applications. Technical specifications include input voltage range of 40-60VDC, output power of 5000W, protections such as overvoltage and overcurrent protection, and environmental specifications.
The document describes the SLI 50 inverter series, which provides 5000 watts of power in a compact 2U high, 19-inch rack mountable package. Key features include high efficiency up to 93%, true sine wave output, an LCD display for monitoring and configuration, and parallelable output. The inverters are suitable for telecom, IT, and industrial applications. Technical specifications include input voltage range of 40-60VDC, output power of 5000W, protections such as overvoltage and overcurrent protection, and environmental specifications.
The document describes the SLI 50 inverter series, which provides 5000 watts of power in a compact 2U high, 19-inch rack mountable package. Key features include high efficiency up to 93%, true sine wave output, an LCD display for monitoring and configuration, and parallelable output. The inverters are suitable for telecom, IT, and industrial applications. Technical specifications include input voltage range of 40-60VDC, output power of 5000W, protections such as overvoltage and overcurrent protection, and environmental specifications.
Front panel LCD Display Unit to monitor and set main parameters or LED Unit for visual indication available
High efficiency: up to 93%
True sine wave output
RS485 serial link
Input reflected ripple current <150 mArms @ maximum load
Advanced cooling system to optimize fan life and minimize noise
Parallelable output
2-position subrack availability
DESCRIPTION The SLI 50 Series of Slim Line inverters provide an ideal solution for telecom, IT and industrial applications. Due to innovative technology solutions like the patent-pending Compact Coil", the SLI 50 Series inverters pack 5000 watts of power into a compact package that is 19 rack mountable and only two rack units high. Electrical performance of the SLI Series inverter products is at the top of the market with efficiency that peaks at 93% and a patent-pending control algorithm that compensates current harmonics on the DC side without using bulky and expensive filters. The inverter includes an on-board powerful Digital Signal Processor (DSP) that allows easy programmability of the main parameters on the front panel LCD display and keypad. The SLI Series inverters can be interfaced with RS485. BCD.00296_AA May-17-2013
APPLICATIONS o o o
TELECOM IT INDUSTRIAL
FEATURES
www.power-one.com
DATA SHEET
TECHNICAL DATA: PARAMETER
DESCRIPTION / CONDITION
MIN
NOM
MAX
UNIT
40
48
60 150
VDC ADC
5000 7000 240 30 63 93 5500 1 3 +0.5 0 0
W VA VAC Arms Hz % Wmin
<0.5
INPUT Input Voltage Input Current Inrush Current
ETSI EN 300 132-2; Ver, 2.12, Clause 4.7
OUTPUT Output Power Output Voltage Output Current Frequency Efficiency Overload Load Power Factor Crest Factor Load Regulation Line regulation Output Noise & Ripple Total Harmonic Distortion
@ 48 VDC 150 @ 48 VDC 65 @ 48 VDC 36 260 VAC 2% 195 VAC 2% By safety fuse; 230 VAC Models: 30A Yes; Ipk 95A 5% for 1 sec 30 A (factory default) to 15 A selectable with I2T curve (see spec.) Tamb > 67 C and Tint > 110 C (Visual indication 5 C before shutdown) The restore mode of each protection can be individually selected to "latch" or "auto-restart".
A VDC VDC
INTERFACE & CONTROL SIGNALS
LCD Display Unit LED Unit
128 x 128 pixel graphic with keypad used for monitoring
and setting the main parameters. Standard for visual indication of the main parameters
General Alarm Signal
By a form C signal relay
LED Indicators for both units:
GREEN - Power ON YELLOW - Fan Failure, Addresses RED - Overtemperature, Faulty Condition
SAFETY, REGULATORY AND EMC SPECIFICATIONS
Agency Approvals Insulation
EMC
IEC 60950-1: 2001, 1st edition; EN 60950-1: 2001 + A11: 2004; UL 60950-1, 1st edition; CAN/CSA-C22.2 No.60950-1-03, 1st edition; CE according to Low Voltage Directive and EMC Directive; Kema; CB Report Approval; Primary-to-Secondary: 3000 Vrms Primary-to-Ground: 500 VDC Secondary-to-Ground: 1500 Vrms Signal-to-Ground: 500 VDC Emission: EN 61000-6-4: 2001; EN 55022: 1998 A1:2000 + A2:2003 (Class B) Immunity: EN 61000-6-2: 1999; EN 61000-4-2: 1995 + A1:1998 + A2: 2001 (Crit. A); EN 61000-4-3: 2006 (Crit. A); EN 61000-4-4: 2004 (Crit. A); EN 61000-4-5: 2006 (Crit. A); EN 61000-4-6. 1996 + A1:2001 (Crit. A); EN 61000-4-8: 1993 + A1:2001 (Crit. A); ETSI EN 300-132-2 (Crit. A)
ENVIRONMENTAL SPECIFICATIONS Altitude Operating Temperature Storage Temperature Humidity Output Voltage Temp. Coefficient
Operating: Non-Operating: @ full load; Power derating: 150 W/ C; +55 C to +65 C
-25 -40
13000 40000 +55 +85
ft C C
0 90 %, non-condensing 0.02 % per C within rated load
MECHANICAL SPECIFICATIONS Dimensions (W x H x D) Weight
482 x 88 x 400 mm 14.5 kg
NUCLEAR AND MEDICAL APPLICATIONS - Power-One products are not designed, intended for use in, or authorized for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems without the express written consent of the respective divisional president of Power-One, Inc. TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are subject to change without notice.
[Studies in Fuzziness and Soft Computing 340] Jagdeep Kaur, Amit Kumar (Auth.) - An Introduction to Fuzzy Linear Programming Problems_ Theory, Methods and Applications (2016, Springer International Publishing)
