DESCRIPTION The FMPe20.48G rectifier incorporates resonant technology to reduce component stresses, providing increased system reliability and a best-in-class efficiency. The rectifier features a wide input operating voltage range to maximize power availability within demanding utility power environments. These compact rectifiers support up to 8kW in a 1RU 19 or 10kW in a 1RU 23 shelf. A wide variety of distribution options are available to provide the maximum system flexibility for a wide range of MAX. communications applications that POWER demand efficiency, reliability, and flexibility including wireless base 2000W stations, remote switches, and broadband access.
US
253565
LVD2006/95/EC ROHS2011/65/EU
RECTIFIER MODULE ORDERING GUIDE
OUTPUT VOLTAGE
OUTPUT CURRENT
INPUT VOLTAGE 2
INPUT CURRENT 4
MODEL NO.
48.0VDC 53.5VDC 1
41.7A 37.4A
85-275VAC
11.7A/8.7A
FMPe20.48G
Notes: 1. Default factory setting. 2. Units will operate over the full range from 85VAC to 275VAC, automatically limiting output current according to the actual input voltage range applied. 3. Input currents shown are nominal values at 110VAC/240VAC as appropriate.
The FMPe20.48G is one of several rectifier
types that can be installed in the Guardian Series DC power systems, see additional information on the UNIPOWER web site. FEATURES High efficiency (>96% typical) and energy saving Leading power density up to 21.5W/in Rugged input voltage range Thermal protection Hot-swappable International standards compliance
SHELF ORDERING GUIDE
APPLICATION 48V only Dual 48/24V
RECTIFIER POSITIONS
RACK WIDTH
MODEL NUMBER
19
XG1948G
23
XG2348G
19
XG1900G
23
XG2300G
SHELF ACCESSORIES TWO YEAR WARRANTY SAFETY CERTIFICATIONS UL60950-1 2nd Edition CSA22.2, No. 60950-1 2nd Edition EN60950-1 2nd Edition
www.unipowerco.com
PART NUMBER
DESCRIPTION
XGB-01-G
Blank cover plate for empty slot.
1-157379-G
Bus Bar hardware kit for single shelf applications;
consisting of set of screws and washers for attaching DC power cables. Must be ordered with each shelf used in standalone applications.
1-155302-G
Bus Bar hardware kit for parallel shelf applications;
consisting of DC bus link bars and set of screws and washers for attaching DC power cables. Must be ordered with each shelf used in parallel applications.
NORTH AMERICA CALL: +1-954-905-1071 LATIN AMERICA CALL: +1-954-905-1078 EUROPE CALL: +44 1903 768200
FMPe20.48G Rectifier - 2
Specifications INPUT
MECHANICAL
Voltage
Operating Range: 85-275VAC
Permitted variation: 85-300VAC (L-PE and N-PE <250VAC)
Fan failure Short circuit/arcing protection High temperature/output voltage Low output voltage Input voltage out of range Low fan speed (warning) Internal communication failure
LED Indicators
Green: AC normal operation
Yellow steady: Low fan speed, High temperature Yellow flashing: Comms. failure Red: Module alarm / shutdown
Audible Noise (nominal input)
<39dBA @ 25C (50% load)
<57dBA (100% load)
Operating Temperature
-40C to +75C up to 2000m
Reduced spec -40C to -20C
12.9W/Vin from 180-85Vin
Efficiency
EFFICIENCY (@ 230VAC)
98 97.5
Efficiency [%]
97 96.5 96 95.5 95 94.5 94 93.5 93 10
20
30
40
50 60 Load [%]
70
80
90
100
Tolerance
Vout 0.5% from 10-90% load
Transient Response
6% at load variation 10-90%
or 90-10%, recovery time 50ms
Load Sharing
<5% of nominal current
2500
Ripple
<200mV p-p (BW 20MHz)
2000
Psophometric
<2mV, according to CCITT norms
Output Power [W]
TEMPERATURE DERATING
STANDARDS Inrush Current
ETSI ETS 300 132-1
Harmonics
EN61000-3-2
EMC
ETSI EN300 386 V.1.3.2
EN61000-6-1, EN61000-6-2, EN610006-3, EN61000-6-4 EN55024 performance criterion A EN55022 Class B Telcordia NEBS GR1089
Safety
UL60950-1, EN60950-1 CSA-C22.2 No.60950-1-07
Environmental
Storage: ETSI EN300 019-2-1
Transport: ETSI EN300 019-2-2 Operation: ETSI EN300 019-2-3 Damp Heat: IEC60068-2-78
1500 1000
Vin - 180VAC Vin - 150VAC
Vin - 85VAC
500 0
-50
-30
-10 10 30 50 Ambient Temperature [C]
70
90
For 3000m altitude derated by 5C
Storage Temperature
-60C to +85C
MTBF
>350,000 hours (without fan)
at 25C to MIL-HDBK-217F-2
UNIPOWER LLC 3900 Coral Ridge Drive, Coral Springs, Florida 33065, USA sales@unipowerco.com North America: +1 954-905-1071 Latin America: +1 954-905-1078 Europe: +44 1903 768200
FMPe20.48G Rectifier - 3
1RU Power shelf Specifications
INTERFACE / SIGNALING Addressing
For controller supervision each module position is addressed via DIP switches. Each switch can set 4-bit binary address, which means up to 16 Power Shelves (with up to 64 modules) can be supervised. Addressing is performed by setting the four bits to ON or OFF (ON=1, OFF=0).
Communication
Internal Communication bus RS485
DESIGN STANDARDS EMC
IEC/EN61000-4-6; GR-1089; IEC/EN61000-4-3; EN55022/CISPR 22 Class B; FCC E222CFR
Safety
UL60950-1 CSA60950-1 EN60950-1 (UL approval only for input voltage levels 120 VAC / 250 VAC) IEC60950-1 CB report CE-mark for LVD/EMI
-40C to +55C up to 2000m; Reduced specification: -40C to -20C
Extended Temperature and
Altitude
Linear derating from 100% to 70% maximum power at 55 to 65C
Reduced ambient temperatures by 5C at 3000m
Cooling
Designed for fan cooled, speed controlled modules (front to rear airflow)
Module Configuration
Hot-swappable modules (N+1)
Insulation
Basic: from input to chassis
Reinforced: from input to output
Enclosure
IP21
Dimensions, inches (mm)
XG1948G: 19.0 (483) W x 1.75 (44.5) H x 15.1 (384) D
XG2348G: 23.0 (584) W x 1.75 (44.5) H x 15.1 (384) D XG1900G: 19.0 (483) W x 1.75 (44.5) H x 16.1 (409) D XG2300G: 23.0 (584) W x 1.75 (44.5) H x 16.1 (409) D
Weight (no modules)
XG1948G: 11.0 lb (5.0 kg)
XG2348G: 13.2 lb (6.0 kg) XG1900G: 13.2 lb (6.0 kg) XG2300G: 14.3 lb (6.5 kg)
Mounting
19 or 23
Application
XG1948G & XG2348G - 48V only
XG1900G & XG2300G - dual 48V & 24V or 24V only
UNIPOWER LLC 3900 Coral Ridge Drive, Coral Springs, Florida 33065, USA sales@unipowerco.com North America: +1 954-905-1071 Latin America: +1 954-905-1078 Europe: +44 1903 768200
FMPe20.48G Rectifier - 4
1RU Power shelf Mechanical - 19
XG1900G - Top and rear view with position and description of connectors 19 (482.6) 18.3 (465.1) DIP switch (48 V rectifier addressing) Common DC Busbar Negative DC Busbar
AC Input (Module 4)
AC Input (Module 3)
DIP switch (24 V rectifier addressing) Positive DC Busbar GND
AC Input (Module 2)
AC Input (Module1) RS485
16.1 (409)
Current share 24V
19 (482.6)
XG1948G - Top and rear view with position and description of connectors 19 (482.6) 18.3 (465.1)
AC Input (Module 3)
AC Input AC Input Positive (Module 2) Negative (Module 1) DC Busbar DC Busbar RS485
GND
15.1 (384)
AC Input (Module 4)
Dimensions in inches (mm)
19 (482.6)
UNIPOWER LLC 3900 Coral Ridge Drive, Coral Springs, Florida 33065, USA sales@unipowerco.com North America: +1 954-905-1071 Latin America: +1 954-905-1078 Europe: +44 1903 768200
FMPe20.48G Rectifier - 5
1RU Power shelf Mechanical - 23
XG2300G - Top and rear view with position and description of connectors 23 (583.6) 22.3 (566.1) DIP switch (48 V rectifier addressing)
AC Input (Module 4)
DIP switch (24 V rectifier addressing) Negative DC Busbar GND Positive DC Busbar
AC Input (Module 3)
AC Input (Module 2) RS485 Current Share 24V
AC Input (Module 1)
16.1 (409)
AC Input (Module 5)
Common DC Busbar
23 (583,6)
XG2348G - Top and rear view with position and description of connectors 23 (583.6) 22.3 (566.1)
AC Input (Module 5)
AC Input AC Input AC Input (Module 3) (Module 2) (Module 4) Positive DC Busbar Negative DC Busbar
AC Input (Module 1)
GND
Dimensions in inches (mm)
23 (583,6) 2016 UNIPOWER LLC
This document is believed to be correct at time of publication and UNIPOWER LLC accepts no responsibility for consequences from printing errors or inaccuracies. All specifications subject to change without notice.
UNIPOWER LLC 3900 Coral Ridge Drive, Coral Springs, Florida 33065, USA sales@unipowerco.com North America: +1 954-905-1071 Latin America: +1 954-905-1078 Europe: +44 1903 768200
