Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Acharya Nagarjuna University: Nagarjuna Nagar - 522 510 Andhrapradesh, India

Download as pdf or txt
Download as pdf or txt
You are on page 1of 35

ACHARYA NAGARJUNA UNIVERSITY

NAGARJUNA NAGAR 522 510 ANDHRAPRADESH, INDIA

Scheme of Instruction, Examination and detailed Syllabi of


ELECTRONICS & COMMUNICATION ENGINEERING In the specialization of
COMMUNICATION ENGINEERING & SIGNAL PROCESSING

2-Year M.Tech Degree Course


(Semester System)

w.e.f. 2011-2012

ACHARYA NAGARJUNA UNIVERSITY:: NAGARJUNA NAGAR

REVISED REGULATIONS FOR TWO - YEAR M.TECH. DEGREE COURSE (CREDIT BASED SYSTEM) (With effect from the batch of students admitted during the academic year 2011-2012). 1. 1.1 ELIGIBILITY FOR ADMISSION The candidates, both non-sponsored and sponsored, for Admission into M.Tech programme shall have one of the following qualifications. Programme Chemical Engineering Civil Engineering Computer Science and Engineering Electrical and Electronics Engineering Electronics and Communication Engineering Mechanical Engineering Qualifications Bachelor Degree in Chemical Engineering / Chemical Technology / Biotechnology or its equivalent Degree recognized by Acharya Nagarjuna University. Bachelor Degree in Civil Engineering or its equivalent Degree recognized by Acharya Nagarjuna University. B.Tech/B.E Computer Science and Engineering/Information Technology/M.C.A/M.Sc. Computers/M.Sc. Eletronics/M.Sc. Mathematics or its equivalent Degree recognized by Acharya Nagarjuna University. Bachelor Degree in Electrical & Electronics Engineering/Electrical Engineering/ Electrical Power Engineering/ AMIE (Electrical Engineering) or its equivalent Degree recognized by Acharya Nagarjuna University. Bachelor Degree in Electronics & Communication/ Electronic & Instrumentation Engineering/AMIE or its equivalent Degree recognized by Acharya Nagarjuna University. Bachelor Degree in Mechanical Engineering or its equivalent Degree recognized by Acharya Nagarjuna University.

S.No. 1

2 3

1.2

Admission of Non-sponsored category students : Admission of non-sponsored category students is made on the basis of GATE/PGECET rank. When GATE/PGECET qualified candidates are not available, admission will be on the basis of merit in the qualifying examination. Students with or without GATE/PGECET rank should have obtained a minimum of 50% marks in the qualifying examination to become eligible for admission. Reservation of seats to the candidates belonging to Scheduled Castes and Scheduled Tribes is as prescribed by the State Govt./University from time to time. If suitable candidates are not available to fill all the seats reserved for S.T category, they shall be filled by students S.C. Category and vice-versa. If suitable candidates are not available for reserved seats, they shall be filled by the general category candidates.

1.3

Admission of Sponsored Category students: Sponsored category students should have at least 50% marks in the qualifying examination to become eligible for

admission to the Post Graduate Programme. candidates who are GATE/PGECET qualified.

Preference will be given to those

The candidates must have a minimum of two years of full time work experience in a registered firm / company/ industry / educational and research institutions / any government department or government autonomous organizations in the relevant field in which the admission is being sought. A letter from the employer must be furnished stating that the candidate is being sponsored to get admission. The employer should also indicate that the candidate will not be withdrawn midway till the completion of course. The rule of reservation shall not apply to the admission of sponsored category students. 1.4 The total number of full time candidates admitted into a course with or without GATE/PGECET rank should not exceed the sanctioned strength.

2.0 MEADIUM OF INSTRUCTION, DURATION AND STRUCTURE 2.1. 2.2. 2.3. The medium of instruction shall be in English. The minimum and maximum period for completion of the P.G. Programme is 4 Semesters and 8 Semesters respectively for full time students. Each Semester shall normally spread over sixteen weeks. (a) The Programme may consist of i. Core Courses ii. Elective Courses iii. Seminars iv. Project Work (b) The structure of the Programme comprises of two semesters of course work consisting of 6 Core subjects + 6 Elective subjects plus (3 Labs + 1 Seminar) or (2 Labs + 2 Seminar) followed by two semesters of Project work. In the third semester the student should give a project seminar. At the end of fourth semester the students should submit Project Thesis. Project work shall be carried out under the Supervision of a Faculty Member in the concerned department. A candidate may, however, in certain cases, be permitted to work on his Project/Dissertation at the place of employment, any recognized Institution/R&D Organization/Industry with the approval of the Head of the Department concerned and Head of the Organization. In such cases, the Project Work shall be jointly supervised by a member of the faculty and a person from the Organization holding a minimum of P.G. Degree in the concerned area of specialization. Five copies of the Project Report certified by the Supervisor(s) and the Head of the Department concerned shall be submitted within one Calendar Year after completion of the second semester. The student is eligible for the submission of M.Tech. Project Report at the end of fourth semester if he/she passed all the course work in the first & second semesters. In a special case, if any candidate unable submit his/her Project Report at the end of fourth semester due to ill health or any other reason permitted by the head of the

2.4. 2.5.

2.6.

2.7.

2.8.

institution, he/she will be allowed submit at a latter date.and the viva-voce examination will be conducted separately.

3.0. ATTENDANCE 3.1 3.2. The candidate shall put up a minimum of 75% attendance in each subject. Condonation of shortage in attendance up to 10% in any subject may be condoned by the University on the recommendations of the Principal of the concerned College for reasons of ill health and the application is submitted at the time of actual illness and is supported by a certificate from the authorized Medical Officer approved by the Principal. If the candidate does not satisfy the attendance requirement in any subject he or she shall not be permitted to appear for the University examination in that subject and has to repeat that subject when next offered or study any other specified subject as may be required. In case of repetition the new internal marks be taken into account. Failure in securing minimum prescribed attendance in any subject of previous Semester (s) is no bar for enrollment to the next semester.

3.3.

3.4.

4.0. EVALUATION 4.1 The performance of the candidate in each semester shall be evaluated subject wise. The maximum marks for each subject, seminar etc, will be as prescribed in the curriculum. The Internal Evaluation for Theory subjects shall be based on the best of the performances in the two mid term examinations one held in the middle of the semester and another held immediately after the completion of the instruction. The internal evaluation for practical subjects is based on the day to day performance and semester end internal practical Examination. The marks for Seminar will be awarded by internal evaluation made by two staff members of the faculty of the department concerned. For taking the University examination in any theory or practical subject, candidates shall be required to obtain a minimum of 50% marks in Internal evaluation in that subject failing which he/she shall be required to repeat the course in that subject when next offered or study any other specified subject as may be required. In case of repetition the new internal marks will be taken into account. A candidate shall be deemed to have secured the minimum academic requirement in a subject if he or she secures a minimum of 50% marks in internal evaluation. In case the candidate does not secure the minimum academic requirement in any subject he/she has to reappear in the University examination in that subject or any equivalent subject prescribed Failure to attain the minimum academic requirement in any subject of previous semester (s) is no bar for enrollment to the next semester.

4.2 4.3

4.4 4.5

4.6

4.7

The performance of the students in each semester shall be evaluated subject wise The distribution of marks between sessional work (based on internal assessment) and University Examination will be as follows: Sessional Marks 30 30 100 50 University Exam. Marks 70 70 -150 (Viva voce)

Nature of the subject Theory subjects Practicals Seminar Project work

5. AWARD OF CREDITS Credits are awarded for each Theory/Practical/Seminar/Project Subjects. Each theory subject is awarded 4 credits and each practical/Seminar subjects is awarded 2 credits. Project seminar in III Semester is awarded 8 credits and Project Viva-voce at the end of IV Semester is awarded 16 credits. 6. AWARD OF GRADES S.No. 1 2 3 4 5 6 7 8 Range of Marks 85% 75%-84% 65%-74% 60%-64% 55%-59% 50%-54% 49% The grade W represents withdrawal/absent (subsequently changed into pass or E toS or F grade in the same semester) Grade S A B C D E F(Fail) W Grade Points 10.0 9.0 8.0 7.0 6.0 5.0 0.0 0.0

A Student securing F grade in any subject there by securing 0 grade points has to reappear and secure at least E grade at the subsequent examinations in that subject W denotes withdrawal/absent for a subject After results are declared and Grade sheets will be issued to each student which will contain the following details: The list of subjects in the semester and corresponding credits and Grade obtained The Grade point average(GPA) for the semester and

The Cumulative Grade Point Average(CGPA) of all subjects put together up to that semester from first semester onwards

GPA is calculated based on the fallowing formula: Sum of [No.Credits X Grade Points] _______________________________ Sum of Credits CGPA will be calculated in a similar manner, considering all the subjects enrolled from first semester onwards. 7. AWARD OF DEGREE AND CLASS A candidate who becomes eligible for the award of the degree shall be placed in the following three divisions based on the CGPA secured by him/her for the entire Programme S.No. 1 2 3 Class First Class With Distinction First Class Second Class CGPA 8.0 or more 6.5 or more but less than 8.0 5.0 or more but less than 6.5

8. WITH-HOLDING OF RESULTS The result of a candidate may be withheld in the following cases i. The candidate has not paid dues to the institution ii. A case of indiscipline is pending against the candidate iii. A case of malpractice in examination is pending against the candidate The issue of degree is liable to be withheld in such cases 9. GENERAL 8.1 8.2 The University reserves the right of altering the regulations as and when necessary. The regulations altered will be applicable to all the candidates on the rolls irrespective of the fact that the regulations at the time of admission of the student to the programme are different The Academic Regulations should be read as a whole for purpose of any Interpretation Whenever there is a dispute regarding interpretation of regulations, the decision of the Vice-Chancellor is final.

8.3

COURSE DETAILS

Scheme of Instruction

Scheme of Examination

Sl. No. Code No.

Subject Name

Periods per week Lectu re+ Tuto rial Practi cal

Maximum Durati Marks on of Sessi Univer Total Univer onal sity Mar Marks sity ks Mark Exam( s hrs) 3 3 3 3 30 30 30 30 70 70 70 70 100 100 100 100

Credit s

1 2 3 4

CESP 511 CESP 512 CESP 513 CESP 514

CESP 515

CESP 516

CESP 551 CESP 552

Advanced Digital Communication Coding Theory And Techniques Speech Signal Processing ELECTIVE-I: i)Image & Video Processing ii) Wavelet Signal Processing iii) Radar Signal Processing ELECTIVE-I i)Spread Spectrum Communication ii)Advanced signal processing iii) Fibre Optic Communication ELECTIVE-III: i)Artificial Neural Networks ii)Adaptive Signal Processing iii)Microwave Measurements i)Communication Lab ii)Seminar

4 4 4 4

4 4 4 4

--

30

70

100

30

70

100

25

50

75

2 2

TOTAL I Semester: II Semester:


Sl. COURSE DETAILS

24

205

470

675

28

Scheme of

Scheme of Examination

No Code No. Subject Name

Instruction Periods per week Lectu Practi re+ cal Tutor ial

Maximum Marks Duration Session of al University Marks Exam (hrs) 3 3 3 3 30 30 30 30 Univers ity Marks Total Mark s

Credi ts

1 2 3 4

CESP 521 CESP 522 CESP 523 CESP 524

Real Time Signal Processing Random processing &Information Theory Wireless Communication ELECTIVE-I 1. Embedded Systems 2. Pattern Recognition 3. Multirate Systems and filter banks ELECTIVE II 1.Satellite Communication Systems 2. Global Positioning Systems 3. Telecommunication Switching Systems ELECTIVE-III 1. Fuzzy Techniques 2. Optimization Techniques 3. OFDM i)Signal Processing Lab ii)Seminar

4 4 4 4

70 70 70 70

100 100 100 100

4 4 4 4

CESP 525

30

70

100

CESP 526

30

70

100

CESP 561

25

50

75

2 2

TOTAL

24

205

470

675

28

III & IV SEMESTERS

Sl. No.

SUBJECT TITLE

EVALUATION (INTERNAL)

EVALUATION (EXTERNAL) CREDITS

01.

CESP 651 PROJECT

-----

------

02.

CESP 651 SEMINAR

50Marks

100 Marks

16

CESP 511 ADVANCED DIGITAL COMMUNICATION

UNIT I

Intersymbol interference, Duo-binary signaling and modified duo-binary signaling, linear predictive coding, review of orthogonal signals, coherent BPSK & BFSK, MSK, Noncoherent modulator techniques, M-ary modulation of PSK, FSK and QAM
UNIT II

PN sequences, A Notion of spread spectrum, Direct Sequence spread coherent BPSK, signal space dimensionality and processing gain, probability of error, frequency hop spread spectrum, synchronization of spread spectrum signals : Acquisition and tracking
UNIT III

Encryption and Decryption: A model of the encryption and decryption process. Cipher systems, stream encryption and Public key encrypto system.
UNIT IV

Fading: Characterization of fading multi-path channels, Diversity Techniques for fading multi-path channels, frequency selective, non-selective fading, Signal time spreading, Time variance of the channel caused by motion. Text Books: 1. Simon Haykin Digital Communications 2. B.Sklar, Digital Communications, Addison Wesley. Reference Books:
1.

J.G. Proakis, Digital Communications, McGraw Hill. 2. Taub and Schiling Principles of Communication Systems 2nd edition

CESP 512 CODING THEORY AND TECHNIQUES UNIT I

Source Coding : Mathematical models of Information, A Logarithmic Measure of Information, Average and Mutual Information and Entropy, coding for Discrete memoryless Sources, Properties of Codes, Iluffman Code, Run Length Codes, Lempel-Ziv Codes, Shanon Fano coding UNIT II Channel Coding : Introduction to Linear Block Codes, Generated Matrix, Systematic Linear Block Codes, Encoder Implementation of Linear Block Codes, Parity Check Matrix, Syndrome Testing, Error Detecting and Correcting Capability of Linear Block Codes, Hamming Codes, Probability of an Undetected Error for Linear Codes Over a BSC- Perfect Codes UNIT III Cycle Codes : Algebraic Structure of Cyclic Codes, Binary Cyclic Code Properties, Encoding in Systematic Form, Syndrome Computation and Error Detection, Decoding of Cyclic Codes, Cyclic Hamming Codes BCH Codes: Description of the Codes, Minimum Distance and BCH Bounds, Decoding Procedure for BCH Codes, Implementation of Galors Field Arithmetic, Implementation of Error Correction UNIT-IV Convolutional Codes: Encoding of Convolutional Codes, Structural Properties of Convolutional Codes, State Diagram, Tree Diagram, Trellis Diagram, Maximum, Likelihood Decoding of Convolutional Codes, Viterbi Algorithm, Sequential decoding algorithm Text Books : 1. Error Control Coding Fundamentals and Applications by SHU LIN and Daniel J. Costello, JR., Prentice Hall Inc 2. Simon Haykin Communication Systems, 4th edition 3. Digital Communications Fundamentals and Applications by Bernard Sklar, Pearson Education Asis, 2003 4. Digital Communications John G. Proakis, Mc. Graw Hill Publications 5. J. Das, Sk. Mallik, PK Chattergee Princiiples of Digital Communication NAI (P) Ltd, 2000

CESP 513 UNIT I

SPEECH SIGNAL PROCESSING

Introduction Signal and Linear Systems, Frequency analysis, Discrete-time signals and systems, filters

Speech production and acoustic phonetics Anotomy and psysiology of speech organs, articulatory phonetics, acoustic phonetics Short-time speech analysis windowing, spectra of windows, signal analysis in time domain, short time energy, magnitude, zero-crossing rate and auto correlation function, Frequency domain analysis filter banks, formant estimation and tracking UNIT II Linear predictive coading (LPC) analysis Basic principles, computation of LP coefficients, spectral estimation, window considerations, emphasizing low frequencies, pole-zero LPC models Cepstral analysis Mathematical details, applications of the capstrum, Mel-scale capstrum, pitch estimation using time domain and short-time spectral techniques UNIT III Speech enhancement Nature of interfering sounds, speech enhancement techniques, spectral subtraction, enhancement by resynthesis Automatic speech recognition Basic pattern recognition approaches, parametric representation of speech, evaluating the similarity of speech patterns, spectral and temporal variability UNIT IV Hidden Markov Model (HMM) for speech recognition, Viterbi algorithm, training and testing using HMMs, adapting to variability in speech, language models Speaker recognition Recognition techniques, features that distinguish speakers, system design, language and accent identification

Text books :
1. Douglas O Shaughnessy, Speech Communications, second Edition, Oxford University Press, 2000 2. L.R Rabiner and S.W.Schafer. digital Processing of speech signals, Prentice Hall

References :
1. Owens, Signal Processing of Speech 2. Dellar and Proakis, Digital Signal Processing, PHI

CESP 514/1 Image and Video Processing


UNIT I

Color image processing Color models color transformations smoothing and sharpening image segmentation based on color color image compression. UNIT II Video formation , perception and representation color perception and specification video capture and display analog video raster analog color television systems Digital video Fourier analysis of video signals and frequency response of the human visual system. UNIT III Video sampling sampling of video signals video sampling rate conversion video modeling, Two dimensional motion estimation UNIT IV Video coding systems waveform based video coding content dependent video coding. Video compression standards Error control in video communication TEXT BOOKS 1. Digital Image Processing 3rd Editioin - Rafael C.Gonzalez, Richard E.Woods , Pearson Education, 2009. (For Unit I only) 2. Video Processing and Communication 1st edition Prentice Hall ,2001. (For Unit II,III and IV ) REFERENCE BOOKS 1.Image processing, analysis, and machine vision, 2nd Edition,- Sonka M, Hlavac V, Boyle R. Brooks Cole publishing, 1999. 2.Multidimensional, signal, image and video processing and coding, - Woods, Elsevier, Academic press, 2006. Yao Wang, J.Ostermann, Ya Zhang,

CESP 514/2 WAVELET SIGNAL PROCESSING UNIT - I

Orthogonal Signal Spaces, Approximations of Functions by a Set of Mutually Orthogonal Functions,

Orthogonality in Complex Functions, Trigonometric & Exponential Fourier Series, Concepts of Fourier Transforms, Properties and their Significance, Energy and Power Spectral Density Functions UNIT-II Time-Frequency Analysis: Window function, Short Time Fourier Transform, Properties of ShortTime Fourier Transform, Discrete Short-Time Fourier Transform. Continuous Wavelet Transform: Continuous-Time Wavelets, Definition of the CWT, The CWT as a Correlation, Constant Q-Factor Filtering Interpretation and Time-Frequency Resolution, The CWT as an Operator, Inverse CWT UNIT-III Introduction to the Discrete Wavelet Transform and Orthogonal Wavelet Decomposition: Approximation of Vectors in Nested Linear Vector Subspaces, Example of an MRA. MRA, Orthonormal Wavelets and their relationship to filter banks: Formal Definition of MRA, Construction of a General Orthonormal MRA, a wavelet basis for the MRA, Digital Filtering Interpretation, Interpreting Orthonormal MRAs for discrete-time signals UNIT-IV Parsevals Identity for the CWT, Inverse CWT is a many to one operation, Wavelet Inner Product as a Projection Operation, CWT with an Orthonormal basis generating wavelet, A trous algorithm Biorthogonal Wavelet basis, filtering relationship for biorthogonal filters, two dimensional wavelets, wavelet packets TEXT BOOKS : 1. Signal Processing and Linear Systems, B.P. Lathi, Berkley Cambridge 2. Wavelet Transforms - Introduction to Theory and Applications, Raghuveer M. Rao, Ajit opardikar, Pearson Education, Asia REFERENCES : 1. Signals and Systems, B.P. Lathi 2. Fundaments of Wavelets - Theory, Algorithms Goswami, Andrew K. Chan, John Wiley & Sons

and

Applications,

Jaideva

C.

CESP 514/3 RADAR SIGNAL PROCESSING UNIT I Introduction Radar functions and Applications, Target Detection, Resolution and Clutter , Basic Surveillance Radar Implementation Radar Engineering Equation Parameters, loss factors, Radar Detection with Noise, Jamming, Volume Clutter and Area Clutter, Detection Probability, false alarm sensitivity and introductions to

CFAR Technique, Basics of CACFAR processor, Resolution Cell and Measurement Accuracy, Ambiguities in Range and Doppler UNIT II Signal Processing & Waveform Selection 1 : Introduction, Matched Filter Processing (with examples), Matched Filter Receiver, Matched Filter and Correlation Function, Efficiency of Practical Filters, Effect of Transmitted waveform, Correlation Detection, Cross correlation Receiver Detection Criteria, Neyman Pearson Observer, Ideal Observer, Sequential Observer, Likelihood, Ration, Maximum Likelihood Function, Inverse Probability Criterion, Uncertainty Relation UNIT III Signal Processing & Waveform Selection 1I : Transmit Waveforms, Types, Design Criteria, radar Ambiguity Function Principles, Properties, Examples, Radar Environmental Diagram, Optimization, Desirability of Range Doppler Ambiguities Phase Coding Techniques : Principles, Random Binary coding, Binary periodic Sequences, Ambiguity Function for PR Sequences, Maximal Length Binary Codes, Perfect words and Codes, Poly Phase Codes. Decoding Techniques, Analog and Digital Schemes, Noise and Clutter Performances UNIT IV Linear FM and Frequency Coding Techniques: Principles, Linear FM pulses, Generation and Decoding, Distortion effects on LFM Signals, Discrete Frequencies, Waveform Analysis, Capabilities, Resolution properties of Frequency Coded Pulses Text Books: 1. F.E. Nathanson, Radar Design Principles Signal Processing and the Environment , McGraw-Hill, First Edition (1969) 2. Ramon Nitzberg, radar Signal Processing and Adaptive Systems, Artech House, 1999 3. M.I. Skolnik, Introduction to Radar Systems, McGraw-Hill 4. M.I. Skolnik (ed.) Radar Hand Book, McGraw Hill, wnd ed, 1992

CESP 515/1 SPREAD SPECTRUM COMMUNICATION UNIT I Direct Sequence Systems, definitions and concepts, Spreading sequences and waveforms, Systems with PSK Modulatioin, Quaternary Systems, Pulsed Interference, Rejection of Narrowband Interference UNIT II

Frequency Hopping Systems, Concepts and Characteristics, Modulations, Codes for partial band interference, Frequency Synthesizers UNIT III Code Synchronization, Acquisition of Spreading sequences, Serial Search Acquisition, Acquisition correlator, code Tracking, Frequency Hopping Patterns UNIT IV Detection of Spread Spectrum Signals, Detection of Direct sequence signals, Detection of Frequency Hopping Signals

Text Book: 1.Principles of Spread Spectrum Communication Systems by Don.J.Torrieri, Springer Publishers,2005. References: 1. Introduction to spread-spectrum communications by Roger L. Peterson, Rodger E. Ziemer, David E. Borth, Prentice Hall, 1995. 2. Spread Spectrum in Communications, R.Skaug, J.F.Hjelmstad, Published by Institution of Electrical Engineers

CESP 515/2 ADVANCED SIGNAL PROCESSING

UNIT I POWER SPECIRAL ESTIMATION

Estimation of Spectra from Finite Duration Observations of a Signal, the Periodogram, Use of DFT in power Spectral Estimation, Bartlett, Welch and Blackman, Turkey methods, Comparison of performance of Non-Parametric Power Spectrum Estimation Methods. UNIT II PARAMETRIC METHOD OF POWER SPECTRUM ESTIMATION Parametric Methods for power spectrum estimation, Relationship between Auto -Correlation and Model Parameters, AR(Auto-Regressive) Process and Linear prediction, Yule-Walker, Burg and Unconstrained Least Squares Methods, Sequential Estimation, Moving Average(MA) and ARMA Models Minimum Variance Method, Piscaranko's Harmonic Decomposition Method, MUSIC Method. UNIT III Wiener Filtering: Introduction, The FIR Wiener Filter, Filtering, Linear Prediction, Noise Cancellation, Lattice Representation for the FIR Wiener Filter

UNIT IV The IIR Wiener Filter, Non Causal IR Wiener Filter, The Causal Wiener Filtering, Causal Linear Prediction, Wiener Deconvolution, Discrete Kalman Filter. TEXT BOOKS 1. ProakisJG and Manolakis DG Digital Signal Processing Principles, Algorithms and applications, PHI (For Unit I and II ) 2. Statistical digital Signal Processing and Modelling by Monson Hayes, Wiley India Publications. (For Unit III and Unit IV) REFERENCE BOOKS: 1. Openheim AV & Schafer RW, Discrete Time Signal Processing PHI. 2. Orfanadis S, Introduction to Digital Signal Processing PHI 3. Orfanadis S Optimum Signal Processing PHI

CESP 515/3 OPTICAL FIBER COMMUNINATIONS

UNIT I

Optical Fibers: Optical Fiber Modes and Configurations: Fiber Types, Rays and Modes, StepIndex Fiber Structure, Graded Index Fiber Structure. Fiber materials: a. Glass Fibers, Plastic Optical Fibers Signal Degradation in Optical Fibers Attenuation: Attenuation Units, Absorption, Scattering Losses, Bending Losses, Core and Cladding Losses. Signal Distortion in Optical Waveguides: Information Capacity Determination, Group Delay, Material Dispersion , Waveguide Dispersion ,intermodal Dispersion . UNIT II Optical Sources: Light-Emitting Diodes (LEDs), LED Structures, Light Source Materials, Quantum Efficiency and LED Power, Modulation of an LED. Laser Diodes: Laser Diode Modes and Threshold Conditions, Laser Diode Rate Equations, External Quantum Efficiency, Resonant Frequencies, Laser Diode Structures and Radiation Patterns, Single-Mode Lasers Photo detectors: Physical Principles of Photodiodes, The pin Photo detector b.Avalanche Photodiodes ,Photo detector Noise, Detector Response Time, Avalanche Multiplication Noise, Structures for InGaAs APDs. UNIT III Optical Receiver Operation : Fundamental Receiver operation ,Digital Signal Transmission ,Error Sources ,Receiver Configuration, Preamplifiers. Digital Transmission Systems : Point to-Point Links ,System Considerations ,Link Power Budget ,Rise Time Budget WDM Concepts and Components Operational Principles of WDM : Passive Components, The 2 x 2 Fiber Coupler ,Scattering Matrix Representation, The 2 x 2 Waveguide Coupler ,Star Couplers ,Machzehnder Interferometer Multiplexers . UNIT IV Optical Networks: Basic Networks, Network Topologies , Performance of Passive Linear Buses Performance of Star Architectures. SONET/SDH : Transmission Formats and Speeds ,Optical Interfaces, SONET/SDH Rings, SONET/SDH Networks, FDDI Optical fiber Measurements : Introduction ,Fiber attenuation measurements, Fiber dispersion measurements, Fiber cutoff wave length measurements, Fiber numerical aperture measurements, Optical Time Domain Reflectometer (OTDR) TEXT BOOKS 1.Gerd Keiser , Optical Fiber Communications , 3rd Edition , McGraw Hill 2. John M.Senior Optical Fiber Communications, 2nd Edition, PHI

CESP 516/1 ARTIFICIAL NEURAL NETWORKS UNIT I Introduction: History of Neural Networks, Structure and functions of biological and artificial neuron, Neural network architectures, Learning methods, evaluation of neural networks

UNIT II Supervised learning I: Single layer networks, McCulloch Plus Neuron, Model Perceptron I carning, Delta learning Widrow Hoff learning rules, linear seperability, Adaline and modifications UNIT III Supervised learning II: Multi layer networks: Architectures, Madalines, Backpropagation algorithm, importance of learning parameter and momentum term, radial basis functions, polynomial networks Unsupervised learning: Winner Take all learning, out star learning, learning vector quantizers, counter propagation networks, Kohonen self-organizing networks, Grossberg layer, adaptive resonance theory, Hamming Net UNIT IV Assoctative memories: Hebbian learning rule, continuous and discrete, Hopfield networks, recurrent and associative memory, Boltzman machines, Bi-directional associative memory Applications of neural networks : Optimization, Travelling Salesman, Problem solving simultaneous linear equations, Applications in pattern recognition and Image Processing Text Books 1. J.M. Zurada Introduction to Artificial Neural Systems, Jaico Publications 2. Kishan Mehrotra, Chelkuri K. Mohan, Sanjav Ranka, elements of Artificial Neural Networks, Tenram International 3. B. Yegnanarayana, Artificial Neural Networks, PHI, New Delhi 4. Waserman: Neural Computing Theory and Practice

CESP 516/2 ADAPTIVE SIGNAL PROCESSING UNIT I Adaptive Systems :Definitions,Characteristics, Applications, Example of an Adaptive System. The Adaptive Linear Combiner: Description, Weight Vectors, Desired Responses, Performance Function, Gradient and Mean-Suare Error. UNIT II

Approaches to the Development of Adaptive Filter Theory: Introduction to Filtering Smoothing and Prediction-Linear Optimum Filtering ,Problem Statement . Principle of Orthogonality , Minimum Mcan- Squared Error, Winer Hopf Equations, Error Performance , Normal Equation . UNIT III Searching the Performance Surface Methods and Ideas of Gradient Search Methods, Gradient Searching Algorithm and its Solution, Stability and Rate of Convergence, Learning Curves, Gradient Search by Newtons Method, Method of Steepest Descent, Comparison of Learning Curves LMS Algorithms Overview, LMS Adaptation Algorithms, Stability and Performance Analysis of LMS Algorithms, LMS Gradient and Stochastic Algorithms, Convergence of LMS Algorithms UNIT IV Applications Noise Cancelling, Cancelling Echoes in Long Distance Telephone Circuits, Adaptive Beam Forming Kalman Filtering Theory Introduction, Recursive Mean Square Estimation for Scalar Random Variables, Statement of Kalman Filtering Problem, Innovation Process. Estimation of State using the Innovation Process, Filtering, Initial Conditions, Summary of Kalman Filters, Variants of the Kalman Filtering the Extend Kalman Filtering, Identification as a Kalman Filtering Problem TEXT BOOKS: 1. Bernand Widrow Advaptive Signal Processing, PH/Pearson Education, Asia 2. Simon Haykins - Adaptive filter Theory , PH REFERENCES : 1. Sophocles J. Orfamidis - Optimum Signal Processing An Introduction, 2nd Edition, McGraw Hill 2. S. Thomas Alexander Adaptive Signal Processing Theory and Applications, Springer Verlag

CESP 516/3 MICROWAVE MEASUREMENTS UNIT I Measurement of wavelength and frequency, Equivalent circuit of the cavity wave meters, Typical wavemeters, Resonant cavities Methods of Frequency Measurements : Direct measurement, Interpolation method, Additive frequency method UNIT II Measurement of Impedance : Constructional details of slotted section and its limitations, standing wave detector, Techniques in standing wave detector measurements, Measurement of low & high

VSWR., Location of voltage minims, Use of Smith chart in impedance measurements, Errors in standing wave detector impedance measurements, Reflectometers Measurement of Power : Methods of power measurement, Typical barrette elements, thermistor, bolometer bridge circuits, Extending the range of Bolometer devices, Crystal Detector, Dielectric Measurement for Solids UNIT III Measurements on Microwave circuits and components, T and P network, Measurement of scattering coefficients, Graphical determination of scattering coefficients, Coupling and Directivity of directional coupler UNIT IV Measurement of Attenuation: Insertion of Power ratio method, substitutionmethod, scattering coefficient method, Return Loss Antenna Measurements: Measurement of radiation patterns, Antenna gain measurements, Antenna impedance Measurements, Polarization Measurements TEXT BOOKS 1. 2. 3. 4. E.L. Ginzton, Microwave Measurements, Mc Graw Hill Annapurna Das & Sisir K Das, Microwave Engineering, TMH, 2000 P. Rizzi, Microwave Engineering Passive Circuits, Prentice Hall, 1987 D.M. Pozar, Microwave Engineering, John Wiley, 1998

REFERENCE BOOKS : 1. M.L. Sisodia & GS Raghuvanshi, Basic Microwave Techniques and Laboratory Manual, Wiley Eastern, 1987 2. Dennis Roddy, Microwave Technology, PHI, 1986

CESP-551 COMMUNICATION LAB

List of Experiments
1. Time Division Multiplexing of signals & Framing in the TDM 2. Study of Manchester Coder Decoder 3. Forming a PC to PC Communication Link using Optical Fiber and RS 232 interface

4. Measurement of various losses in an Optical Fiber 5. Comparative study of EMI in copper and Optical media 6. Study of Optical Time Domain Reflecto meter 7. Measure the Scattering parameters of the devices: Circulator & Hybrid TEE 8. Study of Antenna Radiation Patterns of E-Plane and H-plane radiation patterns of a Pyramadal horns 9. Study of spectrum analyzer 10. Measurement of Q-factor of cavity resonator 11. Study of Cellular communication Systems 12. Study of Satellite communication Receiver

CESP 521 REALTIME SIGNAL PROCESSING UNIT 1

Real time concepts, structural levels of processing, Digital Signal Processing and DSP systems, Comparison between general purpose and DSP processors, Examples of digital signal processors, Motivation of the specialized processors.
UNIT II

Numeric representation and Arithmetic Fixed point vs floating point, native data word width, Relation between data word size and Instruction word size, Effects of finite word registers
UNIT III

Key features of TMS 320 C54XX, architecture and addressing modes


UNIT IV

Important Instruction set of TMS 320 C54XX


UNIT V

Implementation of Digital Filters on DSP Processors FFT, FIR filters. IIR filters, Adaptive filters and multirate filters
TEXT BOOKS:

1. John G. Ackenhhusin. Realtime Signal Processing, Prentice Hall of India, 1999 2. Phil Lapsley, Jeff Bier, Amit Sheham, DSP Processor Fundamentals Architecturs and Features: S. Chand & Co., New Delhi 3. TMS 320C54XX. Users guide

CESP 522 RANDOM PROCESS & INFORMATION THEORY UNIT I


RANDOM VARIABLES Definition of Random Variable, Probability of Distribution Function, Probability Density Function(PDF), Conditional and Joint Distribution and Densities, Functions of Random Variables, Determining the PDF of Y = g(X), Expected value of a Random Variable, Conditional Expectations, Moments, Joint Moment, Properties of Uncorrelated Random Variables, Jointly Gaussian Random Variables.

UNIT II
RANDOM PROCESSES Introduction, Mathematical definition of a Random Process, Stationary Processes, Mean, Correlation, and Covariance Functions, Ergodic Processes, Transmission of a Random Process through a Linear Time-invariant Filter, Power Spectral Density, Gaussian Process, Noise, Narrowband Noise, Representation of Narrowband Noise in terms of In-phase and Quadrature Components, Representation of a Narrowband Noise in terms of Envelope and Phase Components.

UNIT III
ADVANCED TOPICS IN RANDOM PROCESSES Mean square (m.s.) calculus, Stochastic Continuity and Derivatives, Further results on m.s. Convergence, m.s. Stochastic Integrals, m.s. Stochastic Differential Equations, Karhunen-Loeve Expansion, Representation of Band limited and Periodic Processes, Band limited processes, Band pass Random Processes.

UNIT IV
APPLICATION TO STATISTICAL SIGNAL PROCESSING Estimation of random variables, innovation sequences and Kalman filtering, wiener filters for random sequences, hidden markov models. TEXT BOOKS: 1. PROBABILITY AND RANDOM PROCESSES HENRY STARK JOHN W. WOODS, 3" PEA 2. COMMUNICATION SYSTEMS SIMON HAYKIN, 4TH Ed 3. PROBABILITY AND RANDOM VARIABLES PEBBELS 4. PROBABILITY, RANDOM VARIABLES AND STOCASTIC PROCESSES PAPOOLIS CESP 523 WIRELESS COMMUNICATION

UNIT - I Introduction Evaluation of Mobile Radio Communication, Mobile Radio Systems around the world, Examples of Wireless Communication Systems: Paging systems, Cordless Telephone Systems, Cellular Telephone Systems Modern Wireless Communication Systems: Second generation cellular networks, third generation

networks, Wireless Local Loop (WLL) LMDS, Wireless Local Area Networks (WLAN), Bluetooth & Personal Area Networks UNIT II

The Cellular Concept System Design Fundamentals : Introduction, Frequency Reuse, Channel Assignment Strategies, Handoff Strategies, Interference and System Capacity, Trunking and Grade of Service, Improving Coverage & Capacity in Cellular Systems Mobile Radio Propagation: Large-Scale Path Loss: Introduction, Free Space Propagation Model, Relating Power to Electric Field, The Three Basic Propagation Mechanisms, Reflection, Ground Reflection, Diffraction Scattering, Practical Link Budget Design Using Path Loss Models, Outdoor Propagation Models-(Longley_Rice Model & Durkins Model_ A Case Study), Indoor Propagation Model (Partition Losses (Same Model ) & Partition Losses between Floors), Singal Penetration into Buildings, Ray Tracing and Site Specific Modeling UNIT - III Mobile Radio Propagation: Small-Scale Fading and Multipath : Small-Scale Multipath Propagation, Impulse Response Model of a Multipath Channel, Small-Scale Multipath Measurements, Parameters of Mobile Multipath Channels, Types of Small Scale Fading, Rayleigh and Ricean Distributions, Statistical Models for Multipath Fading Channels, Theory of Multipath Shape Factors for Small-Scale Fading Wireless Channels, Examples of Fading Behavior, Second-Order Statistics Using Shape Factors, Applying Shape Factors to Wideband Channels, Revisiting Classical Channel Models with Shape Factors UNIT IV Review of the Modulation Techniques for mobile radio, Review of the Multiple Access techniques for Wireless Communication, Wireless data networking, Wireless Data Services, AMPS, Global System for Mobile(GSM) Text Books: 1. TS Rappaport, wireless communications: principles and practice, Pearson education 2nd edition. 2. J G Proakis, Digital Communication, McGraw Hill, 1995. 3.. GE Stuber, Priniciples of Mobile Communications, KIuwer academic 1996.

CESP 524/1 EMBEDDED SYSTEMS L 4 UNIT I Introduction : Introduction to Embedded System, Role of processor selection in Embedded Systems, Embedded System project management, design cycle in the development phase for an Embedded System, using of target system or its Emulator and in-Circuit emulator, use of software tools for development of an Embedded Systems. UNIT II T 0 P 0

RTOS and its overview: Real Time Operating Systems: Task and Task States, Tasks and Data, Message Queues, Timers and Timer Functions, Events Memory Management , Interrupt Routines in an RTOS environment, Basic Design Using RTOS. UNIT III Embedded system development : Interfacing of external memory, interfacing of analog and digital blocks, interfacing of different peripheral devices LEDs, LCDs, Graphical LCD, Switches, Relay, Stepper motor, ADC, DAC, and various sensors, introduction to assembler, compiler, cross compilers, and Integrated Development Environment. UNIT IV Net works for Embedded Systems: The I2C Bus, The CAN bus, SHARK link ports, Ethernet, Introduction to Bluetooth: specification, Core protocol. IEEE 1149.1 (JTAG) Testability TEXT BOOKS : 1. The art of programming Embedded systems, Jack G. Ganssle, academic press. 2. Intelligent Embedded systems, Louis L. Odette, Adison Wesly , 1991. 3. J. Starustrup and W. Wolf Hardware software Co Design principles and practice. KJluwer, Academic Publications. REFERENCE BOOKS: 1. Design with PIC microcontroller bu john B. Pitman, pearson edition. 2. Designing Embedded Systems Hardware : John Catsoulis, Shroff Publications, Distributors New Delhi. 3. Microcenters Architecture Programming, Interfacing and system design by Raj Kamal, Pearson edition. 4. Programming Embedded systems in C and C++, Micheel Barr, Shroff Publications, Distributors New Delhi. CESP 524/2 PATTERN RECOGNITION UNIT I

Introduction and basic concepts, Linear decision functions, Dichotomies, Classification by distance functions, Supervised learning
UNIT II

Deterministic approach and statistical approach. Bayes decision theory and likelihood functions UNIT III

Feature selection. K.L expansion. Unsupervised learning


UNIT IV

Elements of synthetic pattern recognition. Sequential and fuzzy pattern recognition


TEXT BOOKS:

1. Ton. JT & Gonzalez RC., Pattern Recognition. Addison Wesley press, 1974 2. Duda & Hart. Pattern Classification and Scene Analysis. Wiley 1973 3. ECE Dept., Recent development in Pattern recognition and digital techniques, February. 1977 4. FU KS Sequential methods in pattern recognition and machine learning. Academic press. 1968

CESP 524/3 MULTIRATE SYSTEMS AND FILTER BANKS


UNIT I

Fundamentals of Multirate Systems: Basic Multirate Operations, Interconnection of Building Blocks, The Polyphase representation, Multistage Implementations, Some Applications of Multirate Systems, Special Filters and Filter Banks
UNIT II

Maximally Decimated Filter Banks: Errors created in the QMF Bank, A Simple Alias Free QMF System, Power Symmetric QMF Banks, M-Channel Filter Banks,

Polyphase representation, Perfect Reconstruction Systems, Alias Free Filter Banks, Tree Structured Filter Banks, TransMultiplexers
UNIT III

Paraunitary Perfect Reconstruction (PR) Filter Banks: Lossless Transfer Matrices, Filter Bank Properties Induced by Paraunitariness, Two channel FIR Para unitary QMF Banks, The Two channel Para unitary QMF Lattice, Transform Coding and the LOT.
UNIT IV

Cosine Modulated Filter Banks: The Pseudo QMF Bank, Design of Pseudo QMF Bank, Efficient Polyphase Structures, Deeper Properties of Cosine Matrices, Cosine Modulated Perfect Reconstruction Systems
TEXT BOOK:

1. Multirate Systems and Filter Banks, P.P.Vaidyanathan, Pearson Education, Low Priced Edition, 2006.
REFERENCE BOOKS:

1. Multirate Signal Processing for Communication Systems by F.J.Harris, Pearson Education, Low Priced Edition. 2. Digital Signal Processing, A computer Based Approach by Sanjit K Mitra, Tata Mc Graw Hill Publishing.

CESP 525/1 SATELLITE COMMUNICATIONS

UNIT I ITRODUCTION AND ORBITAL ASPECTS OF SATELLITE COMMUNICATIONS: A brief history of Satellite Communications, Types of Orbits, Orbital Mechanics: Developing the Equation of the orbit, Keplers laws of planetary motion, locating the satellite in the orbit, locating the Satellite with respect to the Earth, Orbital elements, Look angle determination, Orbital perturbations, launch and launch vehicles, Orbital effects in Communication System performance. UNIT II

SATELLITE SUBSYSTEMS: Introduction, Attitude and Orbit Control System (AOCS), Telemetry, Tracking, Command and Monitoring (TTC&M), Power Systems, Communication Subsystems, Satellite Antennas MULTIPLE ACCESS TECHNIQUES: Introduction, FDMA, TDMA, DAMA and CDMA Satellite Systems Encoder, Decoder, Comparison between FDMA, TDMA & CDMA . UNIT III SATELLITE LINK DESIGN: Basic transmission theory,System Noise Temperature and G / T ratio, Design of Uplink and Down link models, Design of Satellite links for specified C / N ratio. EARTH STATION TECHNOLOGY: Earth Station Design, Design of large antennas, Small earth station Antennas, Propagation Effects on Satellite: Quantifying Attenuation and Depolarization, Rain and Ice Effects, Prediction of Rain Attenuation. UNIT IV SATELLITE PACKET COMMUNICATIONS: Message transmission by FDMA: The M/G/1 Queue, Message transmission by TDMA - Pure ALOHA: Satellite packet switching - slotted ALOHA -Packet Reservation Tree algorithm. VSAT SYSTEMS : Introduction, overview of VSAT Systems, Network Architectures, One way Implementation, Split Two-Way (Split IP) Implementation, Two-Way Implementation, Access Control Protocols, Delay Considerations, Basic Techniques: Multiple Access Selection, Signal Formats, Modulation, Coding, and Interference Issues. TEXT BOOKS: 1. T Pratt and W Bostiain, Satellite Communications, 2nd Edition, John Wiley, 2. Tri T. Ha Digital Satellite communications , 2nd Edition, McGraw Hill 3. Taub and Schilling, Principles of Communication Systems, TMH, 2003. 4. Simon Haykin, Communication Systems, 4th Edition, John Wiley & Sons, 2004. REFERENCE BOOKS: 1. D C Agarwal, Satellite Communications, Khanna Publishers, 2003 2. Robert M Gagliardi, Satellite Communications.

CESP 525/2 GLOBAL POSITIONING SYSTEM AND APPLICATIONS

UNIT I
Overview of GPS : Basic concept, system architecture, space segment, user segment, GPS aided Geo-augmented navigation (GAGAN) architecture. UNIT II GPS Signals, Signal structure, anti spoofing (AS), selective availability, Difference between GPS and GALILEO satellite construction.

UNIT III GPS coordinate frames, Time references : Geodetic and Geo centric coordinate systems, ECEF coordinate world geodetic 1984 (WGS 84), GPS time.

UNIT IV GPS orbits and satellite position determination : GPS orbital parameters, description of receiver independent exchange format (RINEX) Observation data and navigation message data parameters, GPS position determination. GPS Errors : GPS error sources clock error, ionospheric error, tropospheric error, multipath, ionospheric error estimation using dual frequency GPS receiver.

TEXTBOOKS : 1. B. Hoffman Wellenhof, H. Liehtenegger and J. Collins, GPS Theory and Practice, Springer Wien, New York (2001).

REFERENCE BOOKS : 1. James Ba Yen Tsui, Fundamentals of GPS receivers A software approach, John Wiley & Sons (2001).

CESP 525/3 TELECOMMUNICATION SWITCHING NETWORKS UNIT I TELECOMMUNICATION SWITCHING SYSTEMS: Evolution of Telecommunications Simple Telephone Communication Basics of Switching System Electronic Space Division Switching Stored Program Control Centralized SPC Distributed SPC Software Architecture Two Stage Networks Three Stage Networks N Stage Networks Time Division Switching Basic Time Division Time Switching Combination Switching Three Stage Combination Switching N Stage Combination Switching UNIT II TELEPHONE NETWORKS: Subscriber Loop Systems Switching Hierarchy and Routing Transmission Plan Signaling Techniques In-channel Signaling Common Channel Signaling Network Traffic Load and Parameters Grade Of Service and Blocking Probability

FUNDAMENTAL CONCEPTS OF DATA COMMUNICATIONS: Data Communications Codes Bar Codes Character Synchronization Data Communications Hardware Data Communications Circuits Line Control Unit Serial Interfaces UNIT III DATA-LINK PROTOCOLS AND DATA COMMUNICATIONS NETWORKS: Introduction Data Link Protocol Functions Character- and Bit- Oriented Data Link Protocols Asynchronous DataLink Protocols Synchronous Data-Link Protocols Synchronous Data-Link Control High-Level DataLink Control Public Switched Data Networks Asynchronous Transfer Mode DIGITAL T-CARRIERS AND MULTIPLEXING: Time-Division Multiplexing T1 Digital Carrier North American Digital Hierarchy Digital Carrier Line Coding T Carrier Systems European Digital Carrier System Digital Carrier Frame Synchronization Bit Versus Word Interleaving Statistical Time Division Multiplexing Frequency Division Multiplexing FDM Hierarchy Composite Baseband Signal Formation of a Master Group UNIT IV ISDN: What Is ISDN? ISDN Components ISDN Channel Types Basic and Primary Rate Interfaces ISDN Protocols ISDN Features Services and Applications Other ISDN Initiatives DIALUP AND HOME NETWORKING: What Is Dialup Networking? Analog Modem Concepts DSL Service Cable Modems Home Networking Concepts and Issues NETWORK CONVERGENCE: What Is Network Convergence? Networking Issues and Convergence Effects of Network Convergence on Business Convergence At Home TEXT BOOKS: 1. T Viswanathan, Telecommunication Switching Systems and Networks, PHI, 2004 2. Wayne Tomasi, Advanced Electronic Communications Systems, Pearson, 6th Edition, 2004 3. Machael A. Gallo and William M. Hancock, Computer Communications and Networking Tecnologies, Cengage Learning, 1st Edition, 2002 REFERENCE BOOKS: 1. J E Flood, Telecommunications Switching, Traffic and Networks, Person, 1999 2. Ray Horak, Communication Systems and Networks, 3rd Edition, Wiley, 2002

CESP 526/1

FUZZY SYSTEMS

L T P 4 0 0

M 100

UNIT I Classical and fuzzy sets: Classical sets- operations, properties of classical sets, mapping of classical sets to the functions. Fuzzy sets-membership, uncertainty, fuzzy set operations, properties of fuzzy sets. Classical and fuzzy relations: Cartesian product, crisp relations-cardinality, operations and properties of crisp relations, Fuzzy relations-cardinality operations and properties of fuzzy relations. Non interacting fuzzy sets, Tolerance and equivalence relations. UNIT II Membership functions: Futures of membership functions, fuzzification, membership value assignments-intuition, ranking ordering, angular fuzzy sets, neural nets, genetic algorithms,

inductive reasoning, Fuzzy-to-crisp conversions: Lambda-cuts for fuzzy sets, lambda-cuts for fuzzy relations, defuzzification methods. Fuzzy arithmetic, numbers and vectors and extension principle: fuzzy members, approximate methods of extension-vertex method, DSW algorithm, restricted DSW algorithm, fuzzy vectors. UNIT III Classical logic and fuzzy logic: Classical predicate logic-tautologies, contradictions, equivalence, exclusive or and exclusive nor, logical proofs, deductive inferences. Fuzzy logic, approximate reasoning, Fuzzy tautologies, contradictions, equivalence and logical proofs, other forms of the implication operation, other forms of the composite operation. Fuzzy rule-based systems: Natural language, linguistic Hedges, rule-based systems-canonical rule forms, decomposition of compound rules, likelihood and truth qualification, aggregation of Fuzzy rules, Graphical techniques inference. UNIT IV Fuzzy decision-making: Fuzzy synthetic evaluation, fuzzy ordering, preference and consensus, Multi objective decision making, Fuzzy Bayesian Decision method, Decision making under Fuzzy states and fuzzy actions. Fuzzy classification: Classification by Equivalence Relations-crisp relations, Fuzzy relations, Cluster validity, C-Means clustering-Hard C-Means (HCM). Fuzzy CMeans (FCM), classification Metric, Hardening the Fuzzy C-partition, similarity relations from clustering. TEXT BOOKS: 1. Timothy J. Ross, Fuzzy logic with engineering applications, Mc Graw Hill, 1997 2. Klir and Ywan, Fizzy sets and Fuzzy logic, Prentice Hall of India 3. S.Rajasekharan & Y.A.Vijayalakshmi Pai, Neural Networks, Fuzzy logic and Genetic Algorithms, Prentice Hall of India REFERENCE BOOK 1. Fuzzy - Neural Control: Principles, Algorithms and applications by Nie and Linkens, PHI.

CESP 526/2 OPTIMIZATION TECHNIQUES


UNIT I

Classical Optimization Techniques Single variable optimization Multivariable optimization with no constraints Hessian matrix Multivariable saddle point Optimisation with equality constraints Lagrange multiplier method Multivariable optimization with inequality constraints Kuhn Tucker conditions.
UNIT II

One dimensional unconstrained minimization.Elimination methods unrestricted search method Fibonacci method Interpolation methods Quadratic interpolation

and cubic interpolation methods.Unconstrained minimization. Gradient of a function steepest descent method Newtons method Powells method Hooke and Jeeves method.
UNIT III

Integer Linear programming problem Gomorys cutting plane method Gomorys method for all integer programming problems, mixed integer programming problems.Network techniques. Shortest path model Dijkstras algorithm Floyds algorithm minimum spanning tree problem PRIM algorithm Maximal flow problem algorithm.
UNIT IV

Genetic Algorithms, Basic Concepts, Working Principle, Encoding, Fitness Function, Reproduction.
TEXT BOOKS:

1. Optimization theory and application S. S. Rao, New Age International P Ltd. 2. Neural Networks, Fuzzy Logic and Genetic Algorithms Synthesis and Applications by S.Rajasekaran, G.A.Vijayalakshmi Pai, Prentice Hall of India Publishing,2007. REFERENCE BOOKS: 1.Optimisation concepts and applications in Engineering A. D. Belegundu, T. R. Chandrupatla, Pearson Education Asia. CESP 526/3
UNIT I OFDM TRANSMISSION OVER WIDEBAND CHANNELS

OFDM SYSTEMS

Evolution and Applications of OFDM - Choice of OFDM Modulation Performance over AWGN channels - Clipping amplification - AID conversion - Phase noise - Wideband channel models - Effects of time dispersive channels - Channel transfer function estimation System performance and inter subcarrier cancellation.
UNIT II TIME AMD FREQUENCY DOMAIN SYNCRONIZATION

Performance with Frequency and Timing errors- Synchronization algorithms-Comparison of frequency acquisition algorithms- BER performance with frequency synchronization- OFDM synchronization

performance.
UNIT III ADAPTIVE SINGLE - AND MULT USER OFDM

Adaptive modulation - Adaptive OFDM speech system - Pre-equalization - Comparison of adaptive techniques - Power and Sit allocation algorithms - Multi user AOFDM - Block coded AOFDM. Adaptive modulation schemes for OFDM. PMEPR analysis of OFDM systems
UNIT V OPTICAL OFDM

Basic configuration - Spectra! Efficiency - Transmission over SMF and MivlF - M/D system - Wireless over Optical ... 100ps/div. Optical components Div.. - PAPR reduction techniques Power efficient Optical OFDM - Dispersion compensation.
TEXT BOOKS 1. Lajos Hanzo, M.yunster, B.J.Cho! and T. Keller, OFDM and MC -

COMA for Broadband Multi user Communications - WLANs and Broadcasting, John Wiley and sons, IEEE press, 2003. 2. Ramjee Prasad, OFDM for wireless Communication Systems, Artech House Publishers, 2004.

CESP 561 SIGNAL PROCESSING LAB

1. Implementation of Edge Detection Techniques using DSP processor 2. Development of Digital Data Scrambler for speech signals 3. Development of Digital Data Descoraubler for speech an audio signal 4. Implementation of convolution encoder 5. Implementation of convolution veterbi decoder 6. Design and implementation of Digital Filters

7. Implementation of Digital filters for real time applications 8. Implementation JP&G algorithm for image compression 9. Implementation of Adaptive filters 10. Implementation real time system for biomedical signal using DSP processors 11. Application Development using DSP processor for Multi channel telephony system
12. Application Development for voice recognizing systems using DSP processors

You might also like