Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 170 views

    Alignment & Adjustment

    Uploaded by

    falco2010
    This document provides instructions for service adjustments on a color TV-VCR, including: 1. Entering the service mode by pressing specific remote control buttons in sequence to access calibration and adjustment options. 2. Checking the panel maker and model-specific factory settings before making adjustments. 3. Viewing and potentially adjusting the factory data settings like calibrations, white balance, color controls, sound settings, and more. 4. Procedures for white balance calibration and adjustment using test patterns and equipment to correct picture color issues. 5. Instructions for updating the flash ROM software using a downloader cable connected to the service jack.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Alignment & Adjustment

    Uploaded by

    falco2010
    170 views12 pages
    This document provides instructions for service adjustments on a color TV-VCR, including: 1. Entering the service mode by pressing specific remote control buttons in sequence to access calibration and adjustment options. 2. Checking the panel maker and model-specific factory settings before making adjustments. 3. Viewing and potentially adjusting the factory data settings like calibrations, white balance, color controls, sound settings, and more. 4. Procedures for white balance calibration and adjustment using test patterns and equipment to correct picture color issues. 5. Instructions for updating the flash ROM software using a downloader cable connected to the service jack.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for service adjustments on a color TV-VCR, including: 1. Entering the service mode by pressing specific remote control buttons in sequence to access calibration and adjustment options. 2. Checking the panel maker and model-specific factory settings before making adjustments. 3. Viewing and potentially adjusting the factory data settings like calibrations, white balance, color controls, sound settings, and more. 4. Procedures for white balance calibration and adjustment using test patterns and equipment to correct picture color issues. 5. Instructions for updating the flash ROM software using a downloader cable connected to the service jack.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    170 views12 pages

    Alignment & Adjustment

    Uploaded by

    falco2010
    This document provides instructions for service adjustments on a color TV-VCR, including: 1. Entering the service mode by pressing specific remote control buttons in sequence to access calibration and adjustment options. 2. Checking the panel maker and model-specific factory settings before making adjustments. 3. Viewing and potentially adjusting the factory data settings like calibrations, white balance, color controls, sound settings, and more. 4. Procedures for white balance calibration and adjustment using test patterns and equipment to correct picture color issues. 5. Instructions for updating the flash ROM software using a downloader cable connected to the service jack.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 12

    3 Alignments and Adjustments

    3 Alignments and Adjustments


    3-1 Service Instruction
    1. Usually, a color TV-VCR needs only slight touch-up adjustment upon installation. Check the basic characteristics such as height, horizontal and vertical sync. 2. Use the specified test equipment or its equivalent. 3. Correct impedance matching is essential. 4. Avoid overload. Excessive signal from a sweep generator might overload the front-end of the TV. When inserting signal markers, do not allow the marker generator to distort test result. 5. Connect the TV only to an AC power source with voltage and frequency as specified on the backcover nameplate. 6. Do not attempt to connect or disconnect any wire while the TV is turned on. Make sure that the power cord is disconnected before replacing any parts. 7. To protect aganist shock hazard, use an isolation transform.

    3-1

    3 Alignments and Adjustments

    3-2 How to Access Service Mode


    3-2-1 Entering Factory Mode
    1. To enter "Service Mode" Press the remote -control keys in this sequence : - If you do not have Factory remote - control

    Power OFF

    INFO

    MENU

    MUTE

    Power ON

    - If you have Factory remote - control

    PICTURE ON

    DISPLAY

    FACTORY

    - The buttons are active in the service mode. 1. Remote - Control Key : Power, Arrow Up, Arrow Down, Arrow Left Arrow Right, Menu, Enter, Number Key(0~9) 2. Function - Control Key : Power, CH +, CH -, VOL +, VOL -, Menu, TV/VIDEO(Enter)

    3-2-2 Panel Check


    Specially for LE32,37,40S62*, You have to check Panel Maker Because of different adjustments as follows. First of all, Check the label rating! 1) Label Rating File
    PANEL MAKER

    If Panel Mark is "C", Set the factory mode indicating as follows.(LE32S62BX/**) Panel BOM(Bill of material) : BN07-00425A Connector between Panel and Power Unit : BN39-00712C (300mm) * Option Byte 1. Panel Vender : CPT 2. Dimming : ANA-P3 3. Gamma : OFF If Panel Mark is "C". Set the factory mode indicating as follows. (LE37S62BX/**)

    Panel BOM(Bill of material) : BN07-00424A Connector between Panel and Power Unit : BN39-00712J (400mm) * Option Byte 1. Panel Vender : CPT 2. Dimming : ANA-P3 3. Gamma : S4 If Panel Mark is "A" , Set the Factory mode indicating as follows. (LE40S62BX/**) Panel BOM(Bill of Material) : BN07-00370A Connecotor between Panel and Powe Unit : BN39-00712E (400mm) * Option Byte 1. Panel Vender : AUO 2. Dimming : ANA-P3 3. Gamma : OFF Others are same shown below.

    3-2

    3 Alignments and Adjustments

    3-3 Factory Data (MTK)


    1. Calibration 2. Option Byte XX XX XX XX 3. W/B 4. W/B Movie 5. MTK8202 6. Sound 7. YC Delay 8. Adjust 9. Bus Stop 10. Password 80 80 80 80 11. Checksum 0000 12. Spread Spectrum 13. Reset T_SNMMPEU-1000 (Main Micom Ver) Month/ Day / Year / Hour/ Min./Sec. Panel On Time(Hour) XXXXX 0 0 1. Calibration 1) AV Calibration ------ Failure../Success.. ------- Master(MSPG-925F) : model #2, Pattern #24 2) DTV Calibration ----- Failure../Success.. ------- Master(MSPG-925F) : model #6, Pattern #24 3) PC Calibration ------ Failure../Success.. ------- Master(MSPG-925F) : model #21, Pattern #24 4) HDMI Calibration ---- Failure../Success.. ------- Master(MSPG-925F) : model #6, Pattern #24 2. Option Byte

    Panel Inch Panel Vender Dimming Gamma Auto Power Hotel Mode Shop Mode Auto FM High Devi Carrier Mute TTX TTX List TTX Group

    32 CPT ANA-P3 Off On Off Off Off Off Off On Flof User OSD

    V-Chip Caption ID TV Mode ID TV Country Memory Type Volume Table

    Off Off Off UK ETRON Small

    3. White Balance

    ITEM SubBright Roffset Goffset Boffset SubContrast RGain GGain BGain

    RF/AV(Initial value) 128 128 128 128 131 128 128 128

    Component(Initial value) 128 128 128 128 128 128 128 128

    PC 138 (Fixed value) 128 (Fixed value) 128 (Fixed value) 128 (Fixed value) 115 (Fixed value) 128 (Fixed value) 128 (Fixed value) 128 (Fixed value)

    HDMI(Initial value) 128 128 128 128 128 128 128 128

    3-3

    3 Alignments and Adjustments 4. W/B Movie

    Service P Mode Service Color Tone Mov. Contrast Mov. Brightness Mov. Color Mov. Sharpness Cool2 Red Gain Cool2 Blue Gain Cool2 Red Offset Cool2 Blue Offset Cool1 Red Gain Cool1 Blue Gain Cool1 Red Offset
    5. MTK8202 1) Cal. Adjustment

    Dynamic Cool1 80 50 25 45 128 134 128 128 128 128 128

    Cool1 Blue Offset Normal Red Gain Normal Blue Gain Normal Red Offset Normal Blue Offset Warm1 Red Gain Warm1 Blue Gain Warm1 Red Offset Warm1 Blue Offset Warm2 Red Gain Warm2 Blue Gain Warm2Red Offset Warm2 Blue Offset

    128 134 121 127 126 143 111 128 127 142 101 127 128

    R_Offset G_Offset B_Offset R_Gain G_Gain B_Gain Y_Offset Cb_Offset Cr_Offset Y_Gain Cb_Gain Cr_Gain CVBS Offset
    2) Cal. Target

    41 23 28 92 96 92 23 28 31 43 43 43 50

    CVBS Gain CVBS U CVBS V HDMI R_Gain Ref. HDMI G_Gain Ref. HDMI B_Gain Ref. HDMI R_Offset Ref. HDMI G_Offset Ref. HDMI B_Offset Ref. LVDS control

    50 0 0 229 229 229 16 16 16 55

    AV_offset Target AV_offset Delta AV_Gain Target AV_Gain Delta Component_Y_Gain Target Component_Y_Gain Delta Component_Y_Offset Target Component_Pb_Offset Target Component_Pr_Offset Target Component_Y_Offset Delta Component_Pb_Offset Delta Component_Pr_Offset Delta PC_R_Offset Target

    15 1 220 2 234 2 15 128 127 1 0 0 1

    PC_G_Offset Target PC_B_Offset Target PC_R_Offset Delta PC_G_Offset Delta PC_B_Offset Delta PC_R_Gain Target PC_G_Gain Target PC_B_Gain Target PC_R_Gain Delta PC_G_Gain Delta PC_B_Gain Delta

    1 1 0 0 0 254 254 254 0 0 0

    3-4

    3 Alignments and Adjustments 3) Scart RGB

    SC1_R_Offset SC1_G_Offset SC1_B_Offset SC1_R_Gain SC1_G_Gain SC1_B_Gain


    4) Picture Enhance

    112 112 112 80 80 80

    Cut Off Upper Center L Lmt Center R Lmt Ugain Max Lgain Max
    6. Sound

    2 29 8 24 40 40

    AM Mute AM_mute Th_High AM_mute Th_Low FM_mute Th_High FM_mute Th_Low Carrier Shift Saturation Mute Correct Threshold Sync Loop Error Threshold Parity Error Thrd Every Num Frames Num of Check

    Off 176 144 34 32 Off Off 6 201 8 48 512 10

    Num of Double Chk Mono Weight Stereo Weight Dual Weight M2S Threshold S2M Threshold NICAM FINE VOL FM FINE VOL AM FINE VOL FINE TUNE VOL

    30 1 1 1 10 10 20 20 20 20

    7. YC Delay

    RF PAL-B/G RF PAL-D/K RF PAL- I RF PAL- L/L' RF SECAM-B/G RF SECAM-D/K RF SECAM-I RF SECAM-L/L' RF NTSC3.58 RF NTSC4.43 AV PAL AV SECAM AV NTSC 3.58

    10 10 10 10 10 10 10 10 10 10 10 10 10

    AV NTSC4.43 AV PAL60

    10 10

    3-5

    3 Alignments and Adjustments 8. Adjust 1) User Control Initial

    TTX PWM Dyn. Contrast Dyn. Brightness Dyn. Color Dyn. Sharpness Std. Contrast Std. Brightness Std. Color Std. Sharpness Melody Volume Sub Color Contrast Gain Dynamic Contrast
    2) LNA PLUS

    25 100 45 55 75 80 50 55 50 10 50 64 Off

    N_Dyn.Contrast Dynamic CE Dynamic Dimming Channel Table Video Mute Time Language

    Off Off Off Suwon 5 English

    RF_Db-1 RF_Db-2 RF_Db-3


    3) Hotel Option

    0 0 0

    Power On Channel Power On Band Power On Volume Max Volume Local Key Lock Power On Source
    4) HDCP Write 9. Bus Stop

    1 0 10 100 OFF Auto

    Main Loop Eeprom Tuner Normal Watch Dog


    10. Password : 80 80 80 80

    Off Off Off Off On

    3-6

    3 Alignments and Adjustments 11. Checksum XXXX

    12. Spread Spectrum

    Spread Spectrum Step_480I/576I Range_480I/576I Step_480P/576P Range_480P/576P Step_720P Range_720P Step_1080I Range_1080I Step_640_480 Range_640_480 Step_800_600 Range_800_600

    On 90 32 112 41 90 32 90 32 90 43 90 43

    Step_1024_768 Range_1024_768 Step_1360_768 Range_1360_768

    90 43 90 43

    13. Reset

    3-7

    3 Alignments and Adjustments

    3-4 Service Adjustment


    3-4-1 White Balance - Calibration
    If picture color is wrong, do calibration first. Equipment : CA210, Patten : chess pattern Execute calibration in Factory Mode Source AV : PAL composite, Component : 1280*720/60Hz PC : 1024*768/60Hz

    ( chess patten )

    3-4-2 White Balance - Adjustment


    If picture color is wrong, check White Balance condition. Equipment : CA210, Patten : Toshiba Adjust W/B in Factory Mode Sub brightness and R/G/B Offset controls low light region Sub contrast and R/G/B Gain controls high light region Source AV : PAL composite, Component : 1280*720/60Hz HDMI[DVI] : 1280*720/60Hz

    [ Test Pattern : MSPG-945 Series Pattern #16 ] *Color temperature 1500K +/-500, -6 ~-20 MPCD *Color coordinate H/L : 267/263 +/- 2 35.0 Ft +/- 2.0Ft L/L : 270/260 +/- 3 1.5 Ft +/- 0.2Ft

    Toshiba Patten 3-8

    3 Alignments and Adjustments

    3-4-3 Conditions for Measurement


    1. On the basis of toshiba ABL pattern : High Light level (57 IRE) - INPUT SIGNAL GENERATOR : MSPG-925LTH * Mode NO NO 2 : 744X484@60 Hz 6 : 1280X720@60 Hz

    NO 21 : 1024X768@60 Hz * Pattern NO 36 : 16 Color Pattern NO 16 : Toshiba ABL Pattern 2. Optical measuring device : CA210 (FL) Please use the MSPG-925 LTH generator for model LE32S62B, LE37S62B, LE40S62B.

    3-4-4 Method of Adjustment


    1. Adjust the white balance of AV, Component and DVI Modes. (AV (RF Component) DTV PC DVI).

    a) Set the input to the mode in which the adjustment will be made * Input signal - VIDEO Mode : Model #2 (744*484 Mode), Pattern #16 - DTV,DVI Mode : Model #6 (1280*720 Mode), Pattern #16 - HDMI Mode: Model #6(1280*720 Mode), Pattern #16 b) Enter factory color control, confirm the data. c) Adjust the low light. (Refer to table 1, 2 in adjustment position by mode) - Adjust sub - Brightness to set the 'Y' value. - Adjust red offset ('x') and blue offset ('y') to the color coordinates. Picture 4-2 Toshiba ABL Pattern

    Low light Measurement point

    * Do not adjust green offset data. d) Adjust the high light. (Refer to table 1, 2 in adjustment position by mode) - Adjust red gain ('x') and blue gain ('y') to the color coordinates. * Do not adjust the green gain and sub-contrast (Y) data.

    3-9

    3 Alignments and Adjustments d) Adjust the high light. (Refer to table 1, 2 in adjustment position by mode) - Adjust red gain ('x') and blue gain ('y') to the color coordinates. * Do not adjust the green gain and sub-contrast (Y) data. Picture 4-3 Toshiba ABL Pattern

    High light Measurement point

    3-5 Software Upgrade


    3-5-1 How to Update Flash ROM
    1. Installthe Flash Downloader ConnectSet(Service Jack)and Jig Cable to execute Program Update.

    3-10

    3 Alignments and Adjustments 2. Flash Downloader program update (MTK) - After Turning on the set, Click '1'(reset button)button two or more. - Click 'Browse' button, and find micom file for update. - Click 'Upgrade' button. - Turn on the set.

    3-11

    3 Alignments and Adjustments

    Memo

    3-12

    You might also like