Catalog GB

Kemo
2009/10
KITS
B210 M152
EURO 3.00
MODULES CASES
G020N
M169 Temperature switch thermostat 12 V=

Adjustable electronic temperature switch. Operating voltage: 12 V15 V= stabilized (max. 0,1 A). Temperature range: approx. 0...100 C. Switching output: relay contact 1 x switch-over max. 5 A/25 V. The sensor ( 5 mm) may be connected with the control electronics via a cable with a length of up to 1 m. Dimensions: approx. 60 x 45 x 25 mm
Price: 13.40
NEW NEW NEW NEW
Kemo Electronic
Preface
Modern electronics signifies not only a fascinating hobby but also will be profitable with regard to profession. The company Kemo produces for the last 35 years interesting, instructive electronic kits, modules and devices. Due to our range of more than 350 different products we are an important manufacturer on this market. Our range of articles is continuously developed and modernized. All products have been developed in our company and carefully tested and checked before set into series production. We also dispose of an own plastic injection moulding department for the production of plastic parts. Multilingual descriptions are attached to the kits and modules. New developments are already supplied with descriptions in 8 different languages: German, English, French, Spanish, Dutch, Finnish, Portuguese and Russian. If you wish to inform yourself about our products in advance, please visit our website: www.kemo-electronic.eu You will find detailed product information and answers to frequently asked questions there and you may download our software which is needed to operate some of our products free of charge. Klaus Kernchen + staff members of the company Kemo
The prices are recommended selling-prices.
Copyright 2008 by Kemo-Electronic GmbH, K. Kernchen, D-27607 Langen.

Alle Rechte, insbesondere die des Nachdrucks, der Entnahme von Abbildungen, der Wiedergabe auf fotomechanischem oder hnlichem Wege und der Speicherung in Datenverarbeitungsanlagen bleiben, auch bei auszugsweiser Verwertung, vorbehalten. Nachdruck, Verwertung fr eigene Kataloge und Listen nur mit schriftlicher Erlaubnis des Herausgebers (Fa. Kemo-Electronic). Alle Angaben in diesem Katalog sind unverbindlich. Unangekndigte Preisnderungen und nderungen, insbesondere die, die dem technischen Fortschritt dienen, sind vorbehalten. Alle Preisangaben sind unverbindliche Preisempfehlungen. k katalog gb 2008nw
http://www.kemo-electronic.eu
Index
Kits
Page
2 - 33
-------------------------------------------------------------------------------------Modules 35 60
-------------------------------------------------------------------------------------Kits + modules for computer 27,49,50,53,54

Stepper motors suitable for the previous modules:
51 -------------------------------------------------------------------------------------Loudspeaker 63
-------------------------------------------------------------------------------------Devices 61, 62
-------------------------------------------------------------------------------------Cases + div. plastic parts 64 - 68, 71 Accessories -------------------------------------------------------------------------------------Boards and accessories 69 -70
-------------------------------------------------------------------------------------Assortments etc. 72 - 75
-------------------------------------------------------------------------------------Resistance wire Enamelled copper wire and 76 Silver copper wire -------------------------------------------------------------------------------------Diverse 5,70,71 Informations 34 ------------------------------------------------------------------------------------Index A - Z Index Product Groups 77 79 80, 81
Kemo Electronic
B003 Flasher / Alternating flasher for 2 small lamps
...makes the connected small lamps flash at an adjustable flashing speed. To be used as flasher or alternating flasher. For small lamps 6...16 V, max. 300 mA (as flasher) or 2 x max. 300 mA (as alternating flasher). Flashing speed: approx. 1...3 x per sec. Technical data: Operating voltage: 6...16 V= Max. load: 0,3 A per output (2 outputs available) Flashing speed: adjustable, approx. 1...3 times per second Board dimensions: approx. 45 x 22 mm
Kemo Kits
Price: 3.00 Fitting case: G027
B005 Mosquito banisher, flea and tick banisher

...banishes through a high pitched whistling sound the annoying mosquitoes. For 9 V=. Flea and tick banisher: switchable to higher frequencies in order to shoo away vermins at dogs, cats, domestic animals, etc. Technical data: Operating voltage: 9 V= Input current: < 7 mA Frequency: adjustable Transducer: 1 piezo loudspeaker, enclosed Board dimensions: approx. 20 x 55 mm
Price: 3.90 Fitting case: G01B
B007 Electrostat apparatus

...produces from 9....12 V= battery voltage pulsating high-voltage pulses of approx. 80...500 V. Usage: As joke, for use in physical tests or in order to catch earthworms required for fishing. Technical data: Operating voltage: 9...12 V= Output pulse: 80...500 V Board dimensions: approx. 45 x 55 mm
B011 Sensor touch switch

Through soft touching of the sensors with the fingers, nose, etc. it is possible to connect and switch off devices (through a relay). Operating voltage: 12 V=. Ideal as secret switch (screw heads), as original bell, for use in hidden switches, etc. Technical data: Operating voltage: 12 V= Relay contacts: 1 x change over, max. 3 A capacity Board dimensions: approx. 55 x 44 mm

2/GB
Kemo Electronic
B014 27 MHz transmitter 6 W
Measuring transmitter: approx. 25...30 MHz. AM + FM modulation. For 9...24 V. Max. power 6 W input with 24 V. Take into account to observe the legal regulations of telecommunication! In Germany the posession of this device is only allowed to persons holding a permission or to dealers. Attention: Only radio amateurs who demonstrably have a licence are allowed to possess this kit (CCTLaw within the EEC)! Technical data: Transmitting frequency: approx. 25...30 MHz (adjustable) Operating voltage: approx. 9...24 V Input power: max. 6 W Modulation method: AM + FM Board dimensions: approx. 50 x 50 mm
Kemo Kits
14 B0
B015 Fog horn, 5 W

...generates a deep, noisy sound similar to the fog-horns of ships. Operating voltage: 4,5..12 V=. Power: max. 5 W depending on the voltage. For 8 Ohm - loudspeakers. Technical data: Operating voltage: 4,5...12 V= Frequency of tone: adjustable Loudspeaker connection: 8 Ohm Power: max. 5 W Board dimensions: approx. 25 x 27 mm
B018 FM Oscillator 2 W
Adjustable: approx. 80...120 MHz. Operating voltage: 9...26 V=, max. 2 W input. Suitable for microphone or tape connector. In the EC the device may only be used by licensed radio amateurs. The use as bugging device (mini-spy) or private radio transmitter is prohibited and a punishable offence in many countries (e.g. Europe). Exceptions exist in the USA or international waters. The required coil is not enclosed. It is to be wound by using own material (bare wire). This is an incomplete kit. An important component (coil) that is necessary for the function is missing. Therefore, design certificate, attestation of conformity or CE-marking, respectively, are not required. Technical data: Operating voltage: 9...26 V= Input power: max. 2 W, depending on operating voltage Transmitter frequency: adjustable approx. 80...120 MHz Modulation: FM Board dimensions: approx. 45 x 20 mm
B022 6-Channel lighting console

Stereo lighting console with 2 microphones (2 x 3 channels). Each channel is adjustable individually. Lamps up to max. 500 W (220...240 V~) can be connected per channel. High input response! For discotheques, party rooms etc. Technical data: Operating voltage: 220...240 V~ Loading capacity: incandescent lamp load max. 500 W per channel (= total loading capacity 3.000 W) Controller: one controller per channel (total 6 pieces) Control of lamps: half-wave control with thyristors Signal pick-up (music): via 2 electret capacitor microphones Board dimensions: approx. 105 x 55 mm

3/GB
Microphone
B0 15
Kemo Electronic
B025 U-Stroboscope
Flashlight-stroboscope with U-flash tube and large charging capacitor for bright flashes. Adjustable speed: approx. 1...10 Hz. For 230 V~. Ideal as light-shows for discotheques, for special-effect photography, etc. Technical data: Operating voltage: 230 V~ Sequences of flashes: adjustable, approx. 1...10 Hz Board dimensions: approx. 60 x 62 mm
Kemo Kits
4/GB
Kemo Electronic
B037 Sensor number lock
Electronic "sensor" number lock. Touching the correct numbers a relay will operate. In case that false numbers are touched, the lock will block automatically for some time. The number can be preset freely. Operating voltage: 12 V=. Usage: For opening doors and gateways without keys, to switch machines and electronic devices, which should not be operated by unauthorized persons (through latching relay). For selfmade electric locks at safes and partition for valuables etc. Technical data: sensors block Operating voltage: 12 V= Number of sensors: 10 pieces (numbers 0...9) Load relay: approx. 5 A, 1 x change over Board dimensions: approx. 60 x 50 mm
Kemo Kits
B037
sensors open
B038 Voltage converter from 12 V= up to

approx. 220 V~, max. 120 W (input) output power max. 40...70 W
Voltage converter for 12 V car-battery up to 220 V~ alternating voltage, approx. 50 Hz (adjustable). There is also necessary: 2 cooling elements approx. 10 x 15 x 4 cm (or similar) and one power transformer 220 V~ / 2 x 10 V, approx. 20...120 VA (transformer power should be twice as much as the desired output power). For output powers up to 40 W the Kemo-transformer TR01 is especially suitable. Technical data: 220 V~ Operating voltage: 12 V= Power: max. 120 W input Power output: max. approx. 40...70 W Frequency: approx. 50 Hz, adjustable 12V Board dimensions: 54 x 30 mm
Price: 10.80
TR01 Transformer for converter

This transformer is especially suitable for a push-pull DC-voltage converter of 12 V up to 230 V~. It can be used directly when working with our converter-kit B038. The maximal output power of this transformer is about 40/50 W. Packed in a carton. Dimensions: approx. 76 x 69 x 59 mm
Price: 21.60
B042 Time switch (short) approx. 2 sec...5 min.

After pressing the key the installed relay switches on for approx. 2 seconds up to approx. 5 minutes (adjustable) and then switches off again. Operating voltage: 12 V=. Relay contact: 1 x ON, max. 25 V, 3 A. Technical data: Operating voltage: approx. 12 V= Power consumption: approx. 40 mA Switching times: approx. 2 sec. ...5 min. adjustable Relay-breaking capacity: max. 3 A max. 25 V Board dimensions: approx. 54 x 44 mm
5/GB
Kemo Electronic
B045 Light barrier 12 V=
...switches a relay on if there is light or darkness (shadow). Application: if the light ray of a lamp at doors, windows, etc. is interrupted by a person, the relay connects. May also be used as twilight switch. Technical data: Operating voltage: 12 V= Current consumption: < 100 mA Relay contact: 1 x ON max. 3 A max. 25 V Sensitivity: adjustable Designed for visible light Board dimensions: approx. 55,6 x 26,7 mm
Kemo Kits
B048 Temperature switch 12 V=

...switches according to a preset temperature a relay on or off. Ideal as thermostat, ice alarm, fire detector, etc. Temperature range: approx. - 30 ... + 150 C. Relay contact: 3 A. Technical data: Operating voltage: 1214 V= Current consumption: approx. 100 mA at maximum Temperature switching range: approx. 30 + 150 C Relay contact: 1 x ON Contact capacity relay: max. 25 V, 3 A Board dimensions: approx. 55.6 x 26.7 mm
B051 Gas sensor - Spirits tester

This instrument indicates gases such as alcohol, acetone, benzole, propane, carbon monoxide (contained in the smoke of fire). Perfect as alarm for gases + fire. Operating voltage: 12 V=, approx. 150 mA, indication: LED and relay (1 x ON 3 A). Technical data: Operating voltage: 12 V= Relay: 1 x ON, 3 A Board dimensions: approx. 55 x 45 mm
12V=
B052 Destroyer siren

Warship siren "Clear decks for action". In rapid intervals sounds a shortly swelling tone: Uiiit... Uiiit... Power: 3...15 W, depending on the operating voltage. For 6...12 V=. For loudspeaker connection 8 Ohm. Technical data: Operating voltage: 6...12 V= Output power: approx. 3...15 W Loudspeaker power: 8 Ohm Board dimensions: approx. 55 x 31 mm
52 B0
6/GB
Kemo Electronic
B055 Metal searching device
The device locates any metal element till a maximum of 60 mm in walls, floors, etc. Indication is realized through LED. The sensitivity is adjustable. With the help of the ferrite antenna exact locating is possible. Technical data: Operating voltage: 9 V= Sensitivity: adjustable Detecting depth: max. 60 mm Board dimensions: approx. 55 x 32 mm B055
Kemo Kits
B060 Fluorescent lamp voltage transformer

Fluorescent lamp
...with this set fluorescent lamps 8...40 W (ideal 18 W) can be operated directly through a 12 V car battery. The light is as result of the high frequency without any flickering and considerably brighter then similar glowlamps. Ideal for weekend-houses, camping etc. Technical data: Operating voltage: 12 V= Suitable fluorescent lamps: 8...40 W Working frequency: > 1000 Hz Brightness: adjustable Board dimensions: approx. 50 x 21 mm
P1089R Neon lamp - Red P1089G Neon lamp - Green P1089B Neon lamp - Blue
Perfect for neon pictures, decorative lighting in bars, etc. The lamp also works with the Fluorescent lamp voltage transformer B060. Technical data: Operating voltage approx. > 1500 V Dimensions: approx. 75 x 75 mm, 4 mm
Price: 10.80
7/GB
Kemo Electronic
B062 Infrared light barrier - range > 18 m Light barrier with invisible infrared light beam. Transmitter and receiver included! Operating voltage: transmitter 9 V=, receiver 12 V=, relay 1 x ON max. 3 A. Ideal for alarm systems, automatical animal picturing, remote control for garage doors, etc. With incorporated infrared filter for day operation! Technical data: Operating voltage: 9 V= transmitter, 12 V= receiver Transmitting power: adjustable Relay contacts: 1 x ON, max. 3 A Board dimensions receiver: approx. 55 x 44 mm Board dimensions transmitter: approx. 23 x 45 mm
Kemo Kits
transmitter
Recommended tilted mirror if the infrared ray shall be deviated. K002 Reflector Mirror, see page 70
receiver
Price: 13.80 Fitting cases: G026+G027
receiver
transmitter
B063 Digital number lock with super-flat foil keyboard!

After typing in any four-figure number, the relay will pull up. The code number can be programmed freely and is easily changed. Relay contact: 1 x IN max. 5 A load. Operating voltage: 6 V=. Usage: As doorlock without using a key, to switch on devices (radio, TV sets, machines, etc.) which should not be operated by strangers. Even suitable for safe doors! Technical data: Operating voltage: 6 V= Relay contacts: 1 x IN, 5 A Order of figures: four-figure Board dimensions: approx. 55 x 55 mm
B063
enter clear
B065 Voltage transformer input: 6...12 V=, output: 12...30 V=, approx. 1,5...1 A
Electronic transformer for direct voltage. The altitude of the output voltage can be limited electronically. A heat sink approx. 8 x 8 x 2 cm is still necessary. Application: for operation of appliances with a higher operating voltage (e.g.: power amplifiers, CB-radios) at a 6 V or 12 V car battery. Output: for operation from 6 V to 12 V: approx. 1 A. At input 12 V and output 15...30 V between 1,5...1 A, the higher the output voltage, the less the current. Technical data: With input power 6 V: output 12 V= max. 1 A With input power 12 V: output 15...30 V=, max. 1,5...1 A Required cooling unit: 8 x 8 x 2 cm or greater Board dimensions: approx. 55 x 55 mm Input Output
B065
8/GB
Kemo Electronic
B069 Listening-stethoscope 9 V=
You are able to listen through thin walls, doors, windows, etc. Highly sensitive preamplifier with microphone capsule and headphone. To be used for observing animals (e.g. mice), as baby-alarm etc. UB: 9 V=. Attention: It is prohibited on penalty to bug the conversations of other people as well as to eavesdrop on other flats through doors and windows!!! Technical data: Operating voltage: 9 V= Power consumption: < 100 mA Output power max. 0,5 W at 8 Ohm loudspeaker Board dimensions: approx. 57 x 57 mm
Kemo Kits
B073 Pre-Amplifier, universal
super wideband: approx. 10 Hz...150 kHz
2-step preamplifier for 12...30 V= operating voltage. Input: 2...20 mV, output: 200 mV...2 V. Application: pre-amplifier for high-power amplifier, headphones-amplifier, etc. Technical data: Operating voltage: 12...30 V= Input sensitivity: approx. 2...20 mV Output: approx. 200 mV...2 V Structure: 2-stage Board dimensions: approx. 54 x 29 mm
B077 Martin siren - german police siren 12 V= max. 15 W!

Especially high-powered siren with the tune similar to the german police siren: tat...tat...tat. For loudspeaker connection: 8...16 Ohm. - Forbidden to be used for road traffic Technical data: Output power: max. 15 W For loudspeaker: 8...16 Ohm Operating voltage: 12 V= Board dimensions: approx. 55 x 43 mm
9/GB
Kemo Electronic
B081 Deftness game
The matter is to pass a small wire loop through a thread wire with a lot of bends and obstacles. The person who touches the thread wire with the wire loop, will release an acoustic and optic signal. An interesting game for parties and for neverending evenings. Operating voltage: 9...12 V=. Technical data: Operating voltage: 9...12 V= Error indication: optical + acoustical Board dimensions: approx. 45 x 19 mm
Kemo Kits
B085 Parabolic-microphone
This highly sensitive microphone is able to receive after being fitted in a half-ball-shaped reflector (eg. a divided play ball) noises and words from more than some hundred meters. Ideal for observing animals, for detectives etc. For headphone connection 8 ohm. Operating voltage 9 V=. Technical data: Acoustic sensor: high-sensitive FET capacitor microphone Sensitivity: adjustable Operating voltage: 9 V= Power consumption: max. approx. 230 mA Board dimensions: approx. 56 x 56 mm
B088 Mini traffic light

3 small light emitting diodes red-yellow-green will be lighted up in a slow sequence one after another. The control may also control a complete crossing with 4 traffic lights. The additional LED's are not included in the construction set. Technical data: Operating voltage: 4,5...6 V= Switching: 3 (red-yellow-green) Switching sequence: slowly Board dimensions: approx. 43 x 34 mm
10/GB
Kemo Electronic
B089 10-Channel running light 230 V~ + 9 V=
This digital 10-channel running light controls 10 different lamp outputs one after another and in regular intervals, lighting up the corresponding lamps one after another. For 230 V~ glow lamps, max. 100 W per output. The velocity is adjustable. The device works with fullwave control. Technical data: Operating voltage: 230 V~ + 9 V= Power per channel: max. 100 W glow lamp load Running velocity: adjustable Board dimensions: approx. 62 x 67 mm
Kemo Kits
B092 LED-alternating flasher

2 differently coloured light emitting diodes will flash alternately. Adjustable flashing velocity. Operating voltage: 6...12 V= (9 V battery). Usage: flashing adornments, name-plates, for miniature constructions etc. Technical data: Operating voltage: 6...12 V= Power consumption: approx. 20 mA Flashing frequency: adjustable Board dimensions: approx. 24 x 26 mm
B093 Electronic dice

After pressing a key this digital die indicates depending on chance a number between 1...6. Indication takes place via LEDs. Technical data: Operating voltage: 6 V battery or stabilized power supply Current consumption: < 90 mA Indication: Die numbers 1...6 via LEDs Clock frequency: approx. 30 Hz Board dimensions: approx. 55 x 55 mm
11/GB
Kemo Electronic
B095 Marine diesel
...produces a very real noise of a running marine diesel engine. The diesel sound and the running speed are adjustable. For 12 V, loudspeaker 4...8 Ohm. Technical data: Operating voltage: 12 V= Loudspeaker connection: 4...8 Ohm Noises: adjustable Board dimensions: approx. 55 x 46 mm
Kemo Kits
B097 4-Channel running light 230 V~ + 12 V=

This digital 4-channel running light controls 4 different lamp outputs one after another and in regular intervals, lighting up the corresponding lamps one after another. For 230 V~ glow lamps, max. 100 W per output. The velocity is adjustable. The device works with fullwave control. UB: 12 V= and 230 V~. Technical data: Operating voltage: 230 V~ + 12 V= Power per channel: max. 100 W bulb Running speed: adjustable Board dimensions: approx. 58 x 44 mm
B099 Special antenna amplifier 30...850 MHz

Wideband antenna amplifier, approx. 30...850 MHz. Operating voltage: 9...12 V=. Input and output impedance: 60 Ohm. Amplification max. 20 dB. No need of balancing. Especially suitable for amplification of weak television signals within VHF and UHF range as well as for amateurs receivers. Technical data: Operating voltage: 9...12 V= Input and output impedance: 60...75 Ohm Frequency range: approx. 30...850 MHz Amplification: max. 20 dB Board dimensions: approx. 55 x 55 mm
B099
Output
Input
Price: 5.80
12/GB
Output
Input
Kemo Electronic
B100 FM-Receiver 9 V=
High-quality FM-receiver with special-IC. There are hardly tuning necessity (2 coils to be winded). Extraordinary sensitive + selective! Output: approx. 40 mV for a final amplifier or earphone. Technical data: Operating voltage: 9 V= Current capacity: < 10 mA Output voltage: > 40 mV Receiving range: FM Board dimensions: approx. 55 x 55 mm
Kemo Kits
B101 Universal alarm system for car, boat, house, garden, yard
Professional alarm unit for 12 Volt=. Connecting features: max. 20 rest contacts. Contact control and alarm indication via LED's. Adjustable rise-delay time and alarm duration: approx. 2...15 seconds and 8...30 seconds, in accordance with the police law. Technical data: Operating voltage: 12 V= Rise-delay: adjustable Alarm delay: adjustable Alarm duration: approx. 8...30 sec. Relay contact: 1 x change over, 5 A Board dimensions: approx. 58 x 45 mm
Available accessories:
Alarm contacts: A002, A003 and A004 page 71

12V=
B102 Power supply, approx. 1,2...30 V, max. 2 A

Stabilized, electronically controllable power supply with power-IC. There is also necessary a transformer 24 V / 2 A and 1 cooling element with min. dimensions: 10 x 10 x 5 cm. Technical data: Output voltage: approx. 1,2...30 V, adjustable Max. output current: approx. 2 A Board dimensions: approx. 55 x 55 mm
B1 02
Price: 16.30
B104 Ship siren

...produces a loud, deep sound of a siren, similar to that of big vessels. Suitable for model ships, alarm systems, as doorbell or the like. For 6...12 V=, loudspeaker socket 8 Ohm > 2 W. Technical data: Operating voltage: 6...12 V= Current consumption: approx. 30 mA at 12 V= and 8 Ohm loudspeaker Loudspeaker socket: 8 Ohm / 5 W Sound: low frequency (adjustable) Board dimensions: approx. 45 x 18 mm

13/GB
Kemo Electronic
B107 Robot-voice
...alterates the introduced speech so that it sounds like the voice of a robot. Adjustable effects. The device should be connected between the microphone and amplifier (or tape recorder). Technical data: Operating voltage: 9...12 V= Input: approx. 5 mV for microphone Output: > 50 mV for amplifier input Language alienation: adjustable Board dimensions: approx. 55 x 45 mm
9...12 Volt=
Kemo Kits
B107
B108 Atomium
Especially decorative device, 6 yellow LED's ("electrons") rotate one red LED ("atomic nucleus") optically. UB 9 V, ideal as adornment, identity disc, clothes-pin, etc. Technical data: Operating voltage: 9 V= Light indication: 7 LED`s, each 5 mm Board dimensions: approx. 45 x 55 mm
B108
14/GB
Kemo Electronic
B115 Amplifier 8 Watt
HiFi-amplifier with one IC. Operating voltage: 6...16 V= Sensitivity: approx. 160 mV, for loudspeakers 4...16 Ohm. Frequency range: 40...20.000 Hz. Technical data: Max. output power: 8 W Operating voltage: 6...16 V= Input sensitivity: approx. 160 mV Loudspeaker connection: 4...16 Ohm Frequency response: approx. 40...20.000 Hz Board dimensions: approx. 55 x 27 mm
Kemo Kits
15 B1
B119 Converter approx. 100...200 MHz

The converter makes it feasible to receive, for example, taxi radio, amateur radio, marine radio broadcasting, television sound, etc. through an ordinary FM-radio. The converter has simply to be placed within the antenna lead! It is necessary to observe the Postal Regulations! Attention: Only radio amateurs who demonstrably have a licence are allowed to possess this kit! (CCT-Law within the EEC). Please consider, at any circumstances, before starting operation the corresponding legal regulations (telecommunication law). It is not allowed to listen these frequencies out of the radio range. The operation of the converter is solely permitted to those amateurs holding the respective licence. Technical data: Operating voltage: 9...12 V= Sensitivity: up to 0,8 V at 10 dB S/N Board dimensions: approx. 85 x 95 mm
B1 19
Price: 18.90
B120 Ship super diesel 6...12 V=

...produces exceptionally original the rumbling noise of a super diesel motor. It could be adjusted independently: exhaust system noise, rumbling of the valves, running velocity. The running velocity could also be adjusted in function of the electro traction motor. For loudspeaker 4...8 Ohm, 7...10 W! Technical data: Operating voltage: 6...12 V= Loudspeaker connection: 4...8 Ohm Power: max. 7...10 W Noises: adjustable Board dimensions: approx. 70 x 35 mm
20 B1
15/GB
Kemo Electronic
B122 Stereo amplifier
2 x 2,5 W, 6...12 V=, for loudspeaker 8...16 Ohm. Technical data: Operating voltage: 6...12 V= Frequency response: approx. 20...20.000 Hz Input sensitivity: approx. 100 mV Loudspeaker connection: 8...16 Ohm Output power: max. 2,5 W per channel Board dimensions: approx. 54 x 44 mm
Kemo Kits
B122 / 14-192
B123 Combination kit: Light barrier heat switch - twilight switch 12 V=

With this "combination construction set" you may optionally construct a light barrier, a heat switch (-40 C ... +100 C), ice alarm or a twilight switch. Operating voltage: 12 V=. The relay has a max. load of 6 A. Technical data: Operating voltage: 12 V= Current capacity: max. approx. 120 mA Relay: 1 x ON, max. 6 A Switching threshold: adjustable Board dimensions: approx. 45 x 22 mm Lamp Light barrier
B123
12 V=
B123
12 V=
B124 Stereo LED-volume indicator 2 x 11 LED's

Almost inertialess volume indicator for amplifier units from 2...100 Watt. Indication is realised through 22 LED's (2 x 11 LED). Operating voltage: 12 V=. Easy connection with the loudspeakers. Technical data: Operating voltage: 12 V= Sensitivity: adjustable Display: 2 x 11 LED`s Display type: light band Board dimensions: approx. 92 x 46 mm
24 B1
Price: 21.60
24 B1
B125 200 W Amplifier

High-power amplifier of top-class quality for loudspeaker from 4...16 Ohm. Operating voltage: 24...36 V, max. 5 A. F: 20...20.000 Hz. Required cooling element: cooling fin with min. dimensions 20 x 10 x 4 cm or greater (thermal resistance < 1 k/W). The cooling element and insulation material is not enclosed. Technical data: Operating voltage: max. 44 V (max. 5 A) Loudspeaker: 4...16 Ohm Frequency response: 20...20.000 Hz Input sensitivity: approx. 500 mV Board dimensions: approx. 56 x 51 mm
Price: 19.80
16/GB
Kemo Electronic
B126 Power supply, approx. 1,2...30 V, max. 5 A
Steplessly adjustable power supply with a power IC. Max. current consumption: 5 Ampere. There is also necessary a mains transformer 24 V 5 A and 2 cooling elements with min. dimensions: 15 x 10 x 7 cm and 5 x 10 x 3 cm (or similar). Technical data: Output voltage: adjustable approx. 1,2...30 V Output current: max. 5 A Input voltage: 24 V~ 5 A Board dimensions: approx. 55 x 55 mm
Kemo Kits
Price: 7.80
input
B133 Precision timer

Adjustable time switch for switching operations from approx. 1 sec. to approx. 40 minutes. The device switches on after pressing the key and switches off again when the adjusted time has expired. The lapse of time may be interrupted any time with the reset key. Operating voltage: 12 V=. Rupturing capacity: max. 25 V 3 A. Technical data: Adjustable time: approx. 1 sec. to 10 min. or approx. 3 sec. to 40 min. Adjustment of time: with an adjustable regulator Operating voltage: 12 V= Current consumption: < 50 mA Rupturing capacity: max. 25 V, max. 3 A Switching contact: 1 x ON Board dimensions: approx. 54 x 44 mm
17/GB
output right / output left
The decoder has simply to be connected at the A.F. output (e.g. loudspeaker connection) of a FM-radio. It is then possible to connect at the output of the decoder a stereo amplifier. Disconnectible, automatic switchover mono-stereo when receiving the stereo signal. Stereo indication through LED. Technical data: Operating voltage: 4,5...12 V= Change over mono / stereo: automatically Stereo indication: through LED Board dimensions: approx. 70 x 70 mm
B1 2
B127 Stereo decoder
Kemo Electronic
B134 Mono sound controller
separate treble, bass and volume regulation
This mono sound controller must be superposed to the mono final amplifier. Trebles, basses and volume are adjustable separately. Technical data: Operating voltage: 9...18 V= Current load: approx. 3 mA Controlling: approx. 15 dB Board dimensions: approx. 63 x 30 mm
Kemo Kits
B136 Electronic acupuncture

The electronic acupuncture may bring relief to may deseases. This kit works according to electronic acupuncture system. You will find enclosed an illustrated description for the treatment. Operating voltage: 3...6 V=. Prof. Dr. Kazumi Masaki, University of Osaka, has found out that it is possible to replace the since millenium well-proven acupuncture needle by low-frequency undulated currents. 2 electrodes which have to be placed simply on the skin, substitute the often aching treatment with the needle. The electronic acupuncture is free of pain but effective, and may perhaps substitute medicine. Technical data: Operating voltage: 36 V= Power consumption: < 100 mA Output pulses: adjustable according to skin resistance in case of very low currents Board dimensions: approx. 45 x 55 mm
B136
Price: 7.80
B137N Ion generator ---Indoors health resort climate--Input: 12 V=, output: 5...7 kVs. This ion-generator regenerates negatively loaded air particles (air-ions). By this, an air-regenerating effect as well as the binding of dust and bacteria will be achieved. A high share of negative air-ions is necessary for the general well being: it reduces troubled sleep, aggressiveness, headache, sensitivity to changes in the weather, lack of concentration, etc. Technical data: Operating voltage: 12 V= (stabilised power supply) Current consumption: approx. 30...50 mA Output voltage: static, approx. 5000.7000 V peak value Board dimensions: approx. 56 x 45 mm
B146 Electronic melody "Coo Coo Waltz"

...plays for a long time the famous Waltz melody in an expressive high-quality sound. The melody will start through a push-button and stop automatically. Loudspeaker included. Technical data: Operating voltage: 3 V= Loudspeaker: 8 Ohm Melody period: 64 notes Board dimensions: approx. 25 x 28 mm
18/GB
Kemo Electronic
B152 Electronic fence appliance
...produces a pulsatory high-voltage of > 3000 Volt out of 6 Volt. For small animal-electric fences, as protection against burglars (set the door handles under voltage etc.). Furthermore a standard power transformer 230 V~ / 12 V 1 A is necessary. Technical data: Operating voltage: 6 V= Average power consumption: approx. 100 mA on average, up to 1,5 A in pulse spikes Board dimensions: approx. 45 x 21 mm
Kemo Kits
B155 Electronic dog barking

Produces almost realistically and loudly the barking of a dog. For one loudspeaker 8 Ohm, > 1 W. Operating voltage 9 V=. The barking is stored on a special-voice-synthesizer-IC. The sound is adjustable, i.e. from little yelper to big naughty dog. Technical data: Operating voltage: 9 V= Loudspeaker: 8 Ohm (not included) Board dimensions: approx. 55 x 55 mm
B156 FM-Receiver
Also for police radio and aeronautical radio service approx. 108 - 132 MHz! High-quality receiver with the IC TDA 7000. Excellent reception properties + selectivity. Loudspeaker connection 8 Ohm (1 W). Very simple construction, almost no alignments are necessary. Operating voltage 9 Volt approx. 88 - 108 MHz. Licensed radio amateurs may extend the frequency area of this FM-receiver up to approx. 132 MHz. Technical data: Operating voltage: 9 V=, approx. 88 - 108 MHz LF-output power: approx. 1 W Loudspeaker connection: 8 Ohm Receiving range: FM Board dimensions: approx. 60 x 70 mm
9V=
B162 Continuity tester with piezo buzzer

For testing highly resistive and low impedance connections. An extremely low holding-wire current flows (< 10 A). If the connection is conductive, the piezo buzzer hums. Also usable as rain indicator when the test probes contact water! Technical data: Operating voltage: 9 V= Acoustical electrical transducer: piezo Measuring current: < 10 A Board dimensions: approx. 19 x 55 mm

19/GB
9 Volt
Kemo Electronic
B172 The little electro-technician
Easy instructional construction set for beginners from 8 years on. The cables are not soldered, solely screwed or twisted. The tests are described through figures and helpful descriptions. As current supply is been used a 4,5 V flat battery (not included). Among others there are to be made following tests: 1) ordinary circuit with small lamp 2) electromagnetism 3) current proof through compass needle 4) radio transmitter system Marconi 5) generator 6) selfmade battery etc. 7) test: of conductivity of water 8 + 9) LED tests Technical data: Operating voltage: 4,5 V battery (not included) Wiring: through screw-type terminals and loose twisting Mounting instructions: each with figure Age: for beginners from 8 years on
Kemo Kits
Antenna
Price: 7.80
Saltwater
B180 Speed control for mini-drilling machines 12...24 V

...for operation of miniature drilling machines with DC-motor at a transformer. The rectifier is already fitted, you need only a transformer with AC-voltage, voltage according to the drilling machine. For motors up to 3 A current input, voltage 12...24 V. Technical data: Operating voltage (transformer voltage): 12...24 V alternating voltage (50...60 Hz) Max. loading capacity: 3 amperes Connectable loads: direct-current motors 12...24 V, max. 3 A power consumption Possible control: approx. 0...90 % Board dimensions: approx. 55 x 24 mm
80 B1
B181 Paralyser 10.000 Volt - self defense

...produces high-voltage sparks of more than 10.000 V from a 9 V battery which may go through clothes, too. Ideal as self-defence weapon against wild animals etc. or may be used for physical laboratory experiments. In several countries (e.g. in the EU) the possession as a weapon is prohibited. A deterrent effect is already achieved through the sparks flashing over and the sparking crackle! Technical data: Operating voltage: 9 V= Current consumption: approx. 160 mA Output voltage: max. 10.000 V Frequency of sparks: > 3 sparks per second Board dimensions: approx. 65 x 56 mm
High Voltage 10 kV
20/GB
Kemo Electronic
B182 Amplifier 1 Watt
Small universal amplifier with a peak sound capacity of 2 Watt. Operating voltage: 6...9 V=. Input sensitivity: approx. 80 mV, loudspeaker connection: 8 ohm. Frequency range: approx. 20...25000 Hz. Technical data: Power: max. 2 W music power Operating voltage: 69 V= Current consumption: max. 380 mA Frequency range: approx. 2025000 Hz Sensitivity: approx. 80 mV Board dimensions: approx. 44,5 x 18 mm
Kemo Kits
B184 Power supply 0...12 V=, max. 0,8 A

Easy, electronically adjustable experimental power supply. Output voltage adjustable approx. 0 up to 12 V=. Power maximum: 800 mA. For operation is required: 1 mains transformer 15 V~, > 0,8 A and one cooling element with the minimum dimensions: approx. 30 x 70 x 15 mm or greater. Board dimensions: approx. 22 x 63 mm
B185 Flasher 6...12 V=, max. 100 mA

Electronic flasher unit for glow lamps 6...12 V=, max. 100 mA. Also suitable as alternating flasher. Flashing frequency: approx. 1...3 x per second. Ideal for usage within miniature constructing! Together with the additional kit B197 "relay card" (not included in this kit) it is feasible to operate flashers with loads up to 3 Ampere current consumption! Board dimensions: approx. 45 x 26 mm
Available accessory: B197 Relay card 12 V=, page 24
B186 Jumbo LED flasher

Electronic flasher unit with a great 8 mm light emitting diode. Operating voltage: approx. 6...12 V=. Flashing frequency: approx. 60...120 x per minute. For decoration, models etc. Board dimensions: approx. 20 x 55 mm

21/GB
6...12V=
Kemo Electronic
B187 Signal-Injector (test signal generator)
Universal square-wave sound generator with approx. 1000 Hz basic frequency and a great number of harmonic waves which lead up to FM-range. Operating voltage: 6...12 V. The signal can be listened through a highly ohmic earphone or could be amplified for loudspeakers through an amplifier. Ideal as repair equipment for radios and amplifiers, in order to feed a sound signal at various stages of the defect object. Board dimensions: approx. 25 x 24 mm
Kemo Kits
B1 87
Output
B188 Mini signal horn 6...12 V=

With a mini-loudspeaker (approx. 14 x 11 mm) this device emits a tone of approx. 3000 Hz. Ideal for fitting it into miniature models, as signal unit, morse sound generator, etc. Of course, it is possible to connect a greater loudspeaker. Operating voltage: 6...12 Volt=. Board dimensions: approx. 44 x 16 mm
B189 Anti-flea-generator for the cat- and dog-basket

This generator produces ultrasonic sounds, which are adjustable within the range of approx. 8...35 kHz. It is said, that crawling and jumping parasites are banished through the ultrasonic sound. Frequency can be adjusted so that the domestic animal will not be disturbed. Operating voltage: 9 V=. As loudspeaker is required either a small treble loudspeaker 8 Ohm (no piezo!) or a dynamic 8 Ohm earphone. (Not enclosed in the kit). Board dimensions: approx. 25 x 24 mm
B 18 9
B190 Mini alarm system

It is feasible to connect as much alarm contacts as desired. The contacts (not enclosed in the kit) have to be fixed at doors, windows, drawers, etc. which are to be protected. Whenever the alarm will be released, there will sound for approx. 2 seconds a cheeping, shortly swelling up and down tone. The sound is relatively silent, but will attract attention and could be increased through an additional amplifier. A miniloudspeaker 30 mm is enclosed. Operating voltage: 9...12 V=. Ideal as alarm unit for drawers, cupboards and for children's rooms. Board dimensions: ca. 25 x 24 mm
Loudspeaker
B190
Available accessories: Alarm contacts: A002, A003 and A004, page 71

22/GB
Kemo Electronic
B191 Mini timer 9 Volt=
Whenever the enclosed pushbutton will be pushed, the light emitting diode will light up for approx. 100...180 seconds. Usage. As timer for games (e.g. for chess) or for easy photographic and developing works. It is possible to make time adjustable, if a potentiometer 50 k lin. is connected (not enclosed in the kit). We offer as accessories our kit B 197 "Relay Card", through which it is made feasible to switch greater loads up to 3 A with the Mini-Timer. Operating voltage: 9 V=. Board dimensions: approx. 56 x 16 mm
Kemo Kits
Available accessory: B197 Relay card 12V=, page 24
B192 Water level sensor 9 V=

Whenever two bare wires have contact with water, the light emitting diode will light up. The device is suitable to release alarm in case of overflowing rain barrels and gutters. Operating voltage: 9 V=. As accessories is available the kit "B 197 Relay Card", which could be connected with this kit and could switch through the relay contact other devices (e.g. pumps) up to current consumption of 3 A. Technical data: Operating voltage: 9 V= Power consumption: rest (without water contact) < 10 A, LED shines: approx. 15 mA Indication of water: via LED Board dimensions: approx. 45 x 16 mm
20-0
10
B193 Sensor switch 9 V=

Whenever the two screw heads will be touched with the fingers, this device will light up a light emitting diode. Operating voltage 9 V=. As accessories is available our kit B197 relay card". If the relay card will be connected with the sensor switch, it is feasible to switch through the relay contact loads up to 3 A. Board dimensions: approx. 45 x 15 mm
Available accessory: B197 Relay card 12V=, page 24

Sensor
B194 Light barrier

Whenever there is incidence of light onto the phototransistor, the light barrier will switch on a light emitting diode. As soon as the light beam will be interrupted, the LED will switch off. Operating voltage: 6...12 V=. As accessories is available kit B197 Relay card". It is possible to connect it with the light barrier and to switch with the relay contact other loads up to 3 A. Board dimensions: approx. 45 x 15 mm
lamp
light barrier

23/GB
Kemo Electronic
B195 Infrared detector
With the aid of this circuitry it is made possible to carry out functional tests of infrared remote controls used in TV-sets and video devices, etc. Whenever there is radiation of infrared beams on the Special-Sensor, the LED will light up and indicate that the infrared remote control is operated. Operating voltage: 9 V=. As accessories is available our kit "B 197 Relay Card". This could be connected with the Infrared Detector and it is then possible to switch through the relay contact loads up to 3 A. Technical data: Operating voltage: 9 V= (8...12 V) Current consumption without signal: < 200 A Current consumption with signal from a remote control: approx. 2...15 mA Range between remote control and infrared detector: approx. 2...10 cm, depending on the remote control Function display: via a light-emitting diode Board dimensions: approx. 17 x 59 mm
Kemo Kits
B197 Relay card 12 V=

This relay card could be released with weak signals from approx. 5 mA upwards and will then switch a relay with a heavy current contact of 3 Ampere. Contact 1 x ON. Ideal as switching amplifier for other kits, which have solely a light emitting diode as output and should switch other devices and machines through the relay contact. Technical data: Operating voltage: 12 V= Current consumption: < 80 mA Contact capacity: 3 A / 30 V Sensitivity: < 5 mA Board dimensions: approx. 44 x 18 mm
B198 Alarm display

In this alarm display have been fitted 2 different coloured light emitting diodes, which flash alternatively in short sequences. For use in cars, weekend-houses, etc. in order to simulate an armed alarm set. Technical data: Operating voltage: 9...12 V=. Board dimensions: approx. 22 x 27 mm
Price: 3.70
B199 Antenna amplifier approx. 50...1.000 MHz

Single-stage antenna amplifier, with continuously adjustable amplification up to max. 15 dB. For any television range from channel 2 up to channel 65, extraordinary suitable for FM radio and cable television. Input and output impedance: 50...75 Ohm. There are prepared clamps for coaxial cable on the board. As required it is possible to connect two antenna amplifiers one after another. The total amplification will correspondingly increase. The antenna amplifier (with battery) has to be installed into an earthed metal casing. Technical data: Operating voltage: 6...18 V= In- and output impedance: 50...75 Amplification: 0...15 dB, adjustable Frequency range: approx. 50...1000 MHz (TV-channel 2...65) Board dimensions: approx. 26 x 50 mm
Price: 7.80
24/GB
Kemo Electronic
B200 Luminous letters
With this kit it is made possible to mount any capital letter of the alphabet or any digit from 0...9. The concrete description of each letter and of each digit is been enclosed. The kit includes especially bright LED's. The printed wiring board could be equipped also with LED's of any other colour. Operating voltage: 12 V. Current consumption: approx. 100...300 mA, depending on the digit. Dimensions: approx. 90 x 65 mm. With each kit it is feasible to mount any digit and putting several kits together, you are capable to build luminous nameplates, signboards, house numbers etc. Board dimensions: approx. 92 x 67 mm
Kemo Kits
Example for letters put together!
Fitting letter control see B206, page 26
Price: 8.10
B201 Running light 10 channels 12 V=

for small incandescent bulbs 12 V= max. 100 mA
Adjustable running speed. You may connect small incandescent bulbs or light emitting diodes (individually or in groups) up to a total output of 100 mA per channel. Use: Decorative illumination of paintings, toys, model systems (e.g. model airports for the landing area lighting), etc. Board dimensions: approx. 55 x 45 mm
B202 LED running light -10 channelsElectronic running light with 10 light emitting diodes. Operating voltage: 9...12 V=, adjustable running velocity. For usage in decorations, warning advices etc. Technical data: Operating voltage: 9...12 V= Current consumption: approx. 20 mA Running speed: adjustable: approx. 1.54 sec. per passage Board dimensions: approx. 106 x 34 mm
B203 Power supply approx. 1,2...18 V=, max. 10 A

Electronical adjustable high-power supply. Adjustable from approx. 1,2 V to 18 V. Max. output current: approx. 10 Ampere. This power supply works with 5 parallel connected adjustable voltage regulators type LM 317. 4 diodes 25 A are enclosed usable as rectifier. The following is still required: 1 mains transformer 18 V 10 A, 1 cooling element approx. 15 x 10 x 2 cm, 2 cooling elements each approx. 5 x 5 x 2 cm or more. Technical data: Output voltage: approx. 1,2...18 V=, adjustable Max. output current: approx. 10 A Input voltage: 18 V, 10 A transformer Board dimensions: approx. 85 x 45 mm
B203
Price: 21.60
25/GB
Kemo Electronic
B204 Flash-LED 230 V~
Flash circuit with one red light emitting diode 5 mm which can be operated directly at 230 V~. Flash frequency: 2 Hz. Usage: Control-lamp for devices and alarm systems, start control for machines etc. Technical data: Operating voltage: approx. 220...240 V~ Flash frequency: approx. 2 Hz Board dimensions: approx. 25 x 23 mm
Kemo Kits
B206 Luminous letter control

...switches luminous letters or lamp groups slowly one after another on, keeps all letters switched on for a while and switches off all letters at the same moment. Then, the process starts again. There are 4 connecting outputs at which in each case either 1 letter or one letter group could be connected (with a lot of letters or with a whole text). Operating voltage: 12...15 V=. Connecting outputs: 4, each max. 5 Ampere chargable. The connecting velocity is adjustable. The control is especially suitable to be used with our LED-luminous letters Nr. B200. Technical data: Operating voltage: 12...15 V= Switching outputs: 4 Loading capacity: max. 5 A per switching output Clock frequency adjustable: approx. 0.5...1 Hz After the 4th turn-on clock, all outputs still remain switched on for 6 clocks Board dimensions: approx. 55 x 55 mm The control is especially suitable to be used with our LED-luminous letters Nr. B200, page 25
B207 Steamer noise with steam whistle + steam bell

...produces very life-like the wheezing and hissing of a steamer. Furthermore a steam whistle and steam bell may resound. The noises can be released individually by means of a switch. The sound and speed of the noises are adjustable. Operating voltage: 4,5...6 V=. Loudspeaker connection: 8 Ohm, 1 Watt. Besides the single noises, it is also possible to play a program including all noises of a train arriving at the station: The train approaches, becomes louder, whistles and tinkles, enters the station vociferously, slows down and stops with a loud hissing. Technical data: Operating voltage: 4,5...6 V= Loudspeaker connection: 8 Ohm 1 Watt Board dimensions: approx. 55 x 44 mm
B209 LED series printed circuit board 230 V~

LED signal lamp which can be directly operated at 230 V~. Use: signal lamp, operation indication for 230 V~ devices etc. Board dimensions: approx. 29 x 20 mm
B209
26/GB
Kemo Electronic
B210 8-Channel-relay board
...for switching different appliances, lamps or motors by means of a computer program. The relay points can be loaded up to 3 A each at maximum. Operating voltage of the relay board: 12 V=. By means of the enclosed software it is possible to switch on and off up to 8 different appliances at different times. It is also possible to programme certain switching sequences (also for several days) or attractive effect lighting for stages and discotheques! The module has to connected at the printer port of a standard PC. Software-CD is enclosed! Technical data: Operating voltage: 12 V= max. 0.8 A Channels: 8 Relay contact: 1 x ON max. 3 A max. 25 V each (If higher voltages shall be switched, please follow the instructions in the enclosed printed matter no. M1003) Indication: each channel by 1 LED Delivered software: DOS + WIN Board dimensions: approx. 108 x 71 mm
Kemo Kits
B211 Stepper motor control

A 6-branch stepper motor can be operated at this kit. The kit works without computer. For motors 6...12 V=, max. branch current 1.5 A. Adjustable impulse sequence approx. 15...240 per second. In order to switch over the sense of rotation of the motor, a switch 2 x change over is required (not included in the kit). The operating voltage depends on the motor which is used respectively (6...12 V=). Technical data: Operating voltage: 6...12 V= Max. phase current: 1.5 A For stepper motors: 6-phases Impulse sequence: adjustable from approx. 15...240 Hz Board dimensions: approx. 55 x 55 mm 6...12V=
Available stepper motor: P5339 Mini-stepper motor "42 SPM-24 DJA" page 51
Price: 11.80
B212 Decalcifier against calcification and corrosion in water pipes!

This device is not harmful to the environment, i. e. without chemicals and operates on a physical-inductive base. Easy to mount, no intervention into conduits! This module protects washing machines, dish washers, heating boilers etc. Operation with a plug power supply 9...12 V=. Current load: < 20 mA. Technical data: Operating voltage: 9...12 V DC voltage Current consumption: < 20 mA Equipment-on indicator: LED Output: capacitive tension field Board dimensions: approx. 45 x 22.5 mm
27/GB
Kemo Electronic
B213 Infrared light barrier max. 50 m
With the enclosed optics and highly sensitive photodetector this light barrier has a max. range of up to 50 m! The infrared light ray is invisible for men. If the light ray between the transmitter and receiver is interrupted (if a person walks through it) the relay in the receiver switches. Technical data: Operating voltage transmitter: 9 V= Current consumption transmitter: approx. 100 mA Operating voltage receiver: 12 V= Current consumption: max. approx. 50 mA Range: maximal approx. 50 m Relay contact receiver: 1 x switch-over, max. 25 V 3 A Board dimensions transmitter: approx. 58 x 23 mm Board dimensions receiver: approx. 57 x 45 mm
Kemo Kits
Receiver
Recommended tilted mirror if the infrared ray shall be deviated. K002 Reflector mirror, see page 70
Price: 23.80 Fitting case: 2 x G027
Transmitter
B214 Ultrasonic proximity sensor

An LED lights up if a body approaches the ultrasonic sensors at a distance of 10...80 cm (depending on the size of the body). Use: parking-in assistance for cars in garages, alarm signal for persons or animals staying in a certain area. Operating voltage: 9...12 V=. The device works according to the same principle as the ultrasonic echo ranging of bats! This kit may be extended to relay operation with our relay board B197 (not enclosed). Technical data: Operating voltage: 912 V= Operating frequency: approx. 40 kHz Range: approx. 1080 cm, depending on the size of the body (approx. 0.010.5 m2) Display: via a light-emitting diode Current consumption: < 10 mA Board dimensions: approx. 55 x 45 mm
14 B2
B215 Mini-infrared light barrier 10 cm

Infrared-light barrier with transmitter and receiver and a range of approx. 10 cm. Application: for the model railway, entry holes for aviaries, beehives etc. With invisible infrared light ray. Operating voltage: 6...12 V=. The light-emitting diode extinguishes if the light barrier is interrupted. As accessories the kit B197 Relay card" is available in case other loads shall be switched via a relay. Board dimensions: approx. 44 x 15 mm
28/GB
6...12V
Available accessories: B197 Relay card 12 V=, page 24 Recommended tilted mirror if the infrared ray shall be deviated. K002 Reflector mirror, page 70
Kemo Electronic
B216N Infrared light barrier 5 m
With invisible infrared light ray and a range of max. 5m. If the light ray is interrupted (if a person walks through the light ray), this will be indicated by a flashing LED. Operating voltage: 12 V=. If other instruments shall be switched with the light ray (e.g. a siren), a relay (12 V > 600 Ohm) or the Kemo relay card B197 can be connected in addition (both not contained in this kit). Technical data: Operating voltage: 12 V= stabilized Current consumption: < 100 mA infrared Range: > 5 m (with supplementary lens > 10 m, not enclosed) lamp light barrier Transmitting frequency: approx. 3,7 kHz Board dimensions: approx. 58 x 45 mm
Kemo Kits
Stabilized
Recommended tilted mirror if the infrared ray shall be deviated. K002 Reflector Mirror, see page 70
B217 Smoke alarm 12 V=

This visual smoke alarm switches a relay if thick smoke gets between the installed infrared light barrier. Sirens, alarm lamps etc. may then be switched by means of the relay. Operating voltage: 12 V=, max. 150 mA. Technical data: Operating voltage: 12 V= Operating system: optical smoke recognition Indication: via light-emitting diode Relay contact: 12 V, 1 X ON Board dimensions: approx. 59 x 45 mm
B223 Infrared spotlight

With the infrared spotlight CCD- and video cameras may recognize objects also in complete darkness. The infrared light is invisible for men, CCD-cameras can see well with an infrared spotlight. Perfect for inconspicuous observation of entrances, drives etc. Operating voltage: 12...14 V= approx. 300 mA. Range: approx. 5 m. Technical data: Operating voltage: 12...14 V= 12-14V= Current consumption: approx. 300 mA Light frequency: approx. 870...950 nm Board dimensions: approx. 74 x 57 mm
29/GB
Kemo Electronic
B224 Laser show 6 V=
With this laser show many different figures can be projected to the wall by means of a laser. With 2 controllers you may regulate 2 reflecting motors via the installed electronics so that a lot of different figures can be shown. The necessary laser is not enclosed. The following are suitable as laser: laser pointer or laser modules which produce a laser point (without installed dispersing lens). Operating voltage for the laser show: 6 V=, max. 0,3 A. Technical data: Operating voltage: 6 V= Current consumption: approx. 150 mA Reflecting motors: 2 Board dimensions, gold-plated: approx. 100 x 75 mm
Kemo Kits
B224-10-010
Fitting laser Modul: L005
Attention! Laser beam!
B224-10-010
L005 Laser module for B224, B240 + M133

Operating voltage max. 3 V=. Output < 3,5 mW. Wavelength: approx. 650 nm (visible red laser light), laser class 3 A, length of the connecting line approx. 100 mm red (+) / white (-). Dimensions: 8 mm, length 26 mm. Observe the laser regulations! Do not look directly into the beam - risk of retinal burns!!!
Price: 29.80
Attention! Laser beam!
B231 Electronic key

When holding the enclosed key pendant in front of the sensor (distance 5...15 mm), a relay switches on. Application: non-contact door opener to switch appliances etc. You may hide the sensor behind a nameplate or a door glass pane. In this case only "insiders" know, at which point you have to hold the key pendant in order to open the door. Operating voltage: 12 V= approx. 0,1 A. The key pendant does not require any battery! You may buy the substitute key pendant under order no. M131N. Board dimensions: approx. 55 x 46 mm

You may buy the substitute key pendant under No. M131N page 55
Sensor
30/GB
Kemo Electronic
B232/E2
Kemo Kits
B232/E1 B232/S
B232 Infrared stopwatch

Infrared light barrier with stopwatch. For timekeeping at sporting events, etc. The following modes of operation are possible: Start by pushing the button and stop with the infrared light barrier. Start with the infrared light barrier and stop by pushing the button. Start with infrared, switch over the watch and stop with the same light barrier (for circuit). When buying the additional light barrier B232Z, it is also possible to start and stop with 2 light barriers (on a straight distance at the starting and finishing line). Watch: quartz watch with LCD display. Precision: < 30 minutes 1/100 sec., > 30 min. 1 sec.. For battery operation 2 x 9 V=, range max. 8 m. Technical data: Operating voltage + current: transmitter: 9 V=, < 100mA, receiver with watch: 9 V= < 50 mA Range of the light barrier: approx. 8 m Display: < 30 min. resolution up to 1/100 sec., > 30 min. resolution 1 sec. Dimensions: Receiver board E1: approx. 54 x 25 mm Watch board E2: approx. 79 x 54 mm Transmitter board: approx. 54 x 28 mm
receiver E1
watch board E2
Price: 25.80 Fitting cases: G081 + G091
watch board E2
transmitter
B232Z Additional light barrier for infrared stopwatch

Additional light barrier to the kit Infrared Stopwatch B232. By means of this extension it is possible to operate the infrared stopwatch B232 with 2 light barriers: 1 barrier each at the start and finish. Operating voltage: 9 V=. Technical data: Operating voltage + current: transmitter: 9 V= < 100 mA Receiver: 9 V= < 20 mA Range of the light barrier: approx. 8 m Board dimension: Receiver: approx. 54 x 25 mm Transmitter: approx. 54 x 28 mm
B232/E1 B232/S
Price: 13.80 Fitting cases: 2 x G081
transmitter receiver E1 watch board E2
B233 LED emergency light 6...15 V=/~

If the operating voltage for the LED-Emergency light (transfo, power supply, battery) breaks down, the LED still luminescences > 15 minutes! During this time an Gold-Cap-Elca supplies the LED with current. Use: marking of emergency exits, switches, locks etc. Operating voltage: 6...15 V direct current (DC) or alternating current (AC). Technical data: Operating voltage: 6...15 V=/~ Board dimensions: approx. 45 x 12 mm
B235 Christmas tree

With 16 blinking LED's. For decoration purposes. Dimensions: approx. 10 x 7,5 cm. Technical data: Operating voltage: 9 V= Board dimensions: approx. 10 x 7,5 cm

31/GB
Kemo Electronic
B237 6-Melody generator
Every time after pressing the key, the melody generator plays one of the 6 stored melodies in succession. The melodies always play for about 15...25 seconds. Operating voltage: 3...4.5 V=. Required loudspeaker: 4...8 Ohm. Use: doorbell, break signal, etc. Technical data: Operating voltage: 3...4,5 V= Board dimensions: approx. 55 x 21,5 mm
Kemo Kits
B239 Electronic wheel of fortune

After releasing the push-button, the light signal rotates quickly at the 10 LEDs, slows down and then stops at random at one of the LEDs. During operation all LEDs shine except that LED that just receives the signal. Thats why the luminous board looks very decorative. Technical data: Operating voltage: 9...12 V= Number of LEDs: 10 Board dimensions: approx. 56 x 56 mm
B2 39
08-000
B240 Computer laser show

Laser Show with 3 reflecting motors for triggering via a PC > 350 MHz (connection at the LPT 1 printer port). The enclosed software is intended for the operating system WIN 95...98. Laser is not enclosed (you may connect directly almost every spot laser 3 V < 50 mA available on the market). Larger lasers require an own power supply. Many different laser figures can be projected onto a wall and be stored in the computer. Operating voltage: 12 V= < 400 mA. Technical data: Motors: 3 individually controlled reflecting motors Operating voltage: 12 V stabilized DC voltage Power consumption: < 400 mA Control: via an PC at the LPT1 printer port Software: enclosed, for operating system WIN 95...98 Insulation: electrical separation between computer and laser control: 4 optocouplers Laser: not enclosed. For spot lasers. Laser 3 V up to 50 mA may be operated directly at the circuit, larger lasers require an own power supply. Board dimensions: approx. 100 x 60 mm
Available accessory: Laser module L005, see page 30
Price: 32.90
32/GB
Kemo Electronic
B241 10-Channel infrared remote control
For switching 10 different applications via relay On or Off. 1 of the 10 different relays, respectively can be switched on or off each time. Transmitter: 3 V battery, receiver: 12 V. Range: approx. 5 m (with convergent lens approx. 10 m, does not belong to the scope of delivery). Max. rupturing capacity of the installed relay: 25 V 0,25 A AC or DC. If this capacity is not sufficient, stronger relays may be topped. 8 SMD diodes have to be soldered into the board. Technical data: Channels: 10, each with own relay output Rupturing capacity: 0,25 A direct or alternating voltage per relay Range: approx. 5 meters, when superposing a convergent lens at the receiver approx. 10 m (not part of the scope of delivery) Operating voltage transmitter: 3 V= Current consumption transmitter: < 20 mA in transmit mode Operating voltage receiver: 12 V= Current consumption: < 20 mA Board dimensions receiver: approx. 55 x 75 mm Board dimensions transmitter: approx. 105 x 55 mm
Kemo Kits
receiver
Price: 9.80 Fitting case: G085 + G080/241
transmitter
B242 Solar mole and vole repellent

Drives away moles and voles with aggressive, pulsating and seismic oscillations underground. The operating voltage is drawn from a solar cell (enclosed) to be mounted above ground. It is also possible to operate the device with a battery or power supply (3 V). The transmission of oscillations in the earth takes place via a dynamic loudspeaker which has to be packed waterproof into a plastic bag (not enclosed) and dug in the ground. Range: 500...1.000 qm. Technical data: Operating voltage: 2.5...4.5 V Enclosed solar cell: 3.4 V, 30 mA, approx. 37 x 66 mm Clock frequency: approx. 0,1...2 Hz, depending on the operating voltage (solar radiation at the solar cell) Actual seismic frequency during the cycle: approx. 150 Hz Board dimensions: approx. 55 x 22 mm
loudspeaker
solar cell
B243 Marten and vermin repellent 12 V=

This device produces a high ultrasonic sound (approx. 23 kHz). Martens, mice, etc. find this sound extremely annoying and these animals will leave that place (most). Ideal for installation into cars (as protection against martens), in houses against mice, etc. Operating voltage: 12 V16 V=, approx. 50 mA. Technical data: Operating voltage: approx. 1216 V= Current consumption: < 0,05 A Frequency: approx. 23 kHz Loudspeaker: spherical piezoelectric loudspeaker approx. 30 mm Board dimensions: approx. 45 x 29 mm
Price: 5.80 Fitting case: G020N

33/GB
Kemo Electronic
Information
Assembly + Soldering: The components have to be inserted into the board according to the assembly print. Depending on the basic grid distance of the borings on the board the components have to be mounted in horizontal or vertical position. When bending the leads of the components please pay attention that these will not be bent directly at the component! The components might be damaged in such a case! Hold the wires with pointed pliers and bend them directly at the pliers so that no lateral powers are transmitted into the interior of the component! Soldering on the board may only be done with a modern electronic soldering copper (15...30 Watt) with a fine point and colophonium-containing electronic soldering tin! Do not use acidic flux! Before supplying the soldering tin, at first heat the soldering joint with the point of the soldering copper. Press the point slightly against the soldering joint so that the land for soldering on the board and the lead of the component are heated simultaneously. After approx. 1...2 seconds you may add the soldering tin without removing the soldering copper from the soldering joint in the meantime. The soldering tin must lead cleanly around the wire of the component and has to surround the wire cleanly without forming craters. Only then the soldering copper and then the soldering may be removed. Furthermore attention must be paid that no "soldering tin bridges" are made to the adjoining copper tracks and lands for soldering if these are not electrically connected with the soldering joint anyway. The whole soldering at one soldering joint should not exceed a period of 5 seconds at most, as otherwise the components may be destroyed. The most frequent mistakes during soldering are: "cold soldering joints" and "short circuits due to tin bridges or end of wires which were not cut off if these get into touch with an adjoining soldering joint". The soldering point must always be clean and free from scale and oxide. If this cannot be removed by simply wiping with a cloth, file the point once again and tin-plate it immediately again. However, this should only be done with simple copper points. The modern permanent soldering points merely have to be wiped with a humid cloth.
Epoxy base
copper layer
Important! Correct soldering!

Soldering
soldering iron
1.
component
In order to solder the kits it is especially suitable to use a commercial 15...30W soldering iron and 60% solder tin. There should never be any soldering out of the edges of the soldering spot! 1) The conducting line and the wire lead of the kit have to be heated up at the same time. 2) The solder tin should then be melted at the soldering spot (not at the soldering iron!). The solder tin should flow evenly round the soldering spot.
2.
soldering material
3) Now, cut off the sticking out wire. Thats how the finished soldering spot should look like!
False 3.
Correct
34/GB
Kemo Electronic
M007 3-Channel music light
Music light with 3 pre-fixed channels. The module creates a special play of light full of life (with alternating effects). Power: 230 Volt~, 3 x 500 W max. Technical data: Example of connection: Operating voltage: 230 Volt~ The shown accessories are not included! Channels: 3, of that 1 pause channel Power: max. 1500 W (per channel 500 W) to loudspeaker receptacle, e.g. radio NF-sensitivity: approx. 2 Watt Dimensions: approx. 70 x 45 x 20 mm Poti
Kemo Modules
Price: 16.30
lamps
fuse 5A to socket 230V~
M008 Flasher 230 V~

Electronic flasher unit for glow lamps up to max. 600 Watt, 230 Volt~. Slow flash period. 95 % of brightness due to full-wave control. USAGE: advertising lights, alarm systems. Technical data: Example of connection: Operating voltage: 230 Volt~ The shown accessories are not included! Lamp connector: max. 600 Watt Flash sequence: 1 x/s 50 % Dimensions: approx. 60 x 45 x 20 mm
fuse 3A
Price: 10.80
M009 Light flasher 230 V~

...flashes glow lamps 230 V~ approx. 15...200 times per minute (adjustable). It is possible to connect 230 V~-glow lamps up to max. 500 Watt. For operation, it is necessary to connect a potentiometer 100 k. Ideal for advertising or warning lamps, shop-window or party room decorations. Example of connection: Technical data: The shown accessories are not included! Operating voltage: 230 V~ Flash sequence: adjustable approx. 15...200 x per minute Adjusting: Potentiometer 100 k lin 1 W (not enclosed) Load: Lamps 230 V~, max. 500 W Dimensions: approx. 69 x 36 x 23 mm Fuse 3A
Price: 13.40
Lamp 230V~ Poti 100 k linear
M011N 4-Channel running light 230 V~

This running light makes 4 lamps or lamp groups light up one after the other at regular intervals and go out again. The running speed is adjustable: approx. 20...200 cycles per minute. For incandescent bulbs up to 300 Watt at maximum per channel (maximum total output: 1200 W). Depending on the connection, the module may be used for various applications. For luminous advertising in shop windows, for exhibition stands, in discotheques, for party rooms or light warning devices in danger zones. Technical data: Operating voltage: 230 Volt~ Channels: 4 Load per channel: max. 300 Watt Runnig speed: adjustable Dimensions: approx. 144 x 70 x 53 mm (with fastening straps)
Price: 27.50
35/GB
Kemo Electronic
M012 Motor and lamp controller
(Dimmer) 240 V~ / 110 V~, max. 1200 W / 600 W
Kemo Modules
...regulates incandescent lamps, heaters, hand drills, etc. via a potentiometer. Operating voltage: 110...240 V~. Max. admissible current: 6 amperes (3 A constant duty). At 230 V~ this corresponds to 1200 / 600 W and to 600 / 300 W at 110 V~. The following expansion module is available: M150. With it control may be done with control voltages or digital signals instead of the potentiometer. Technical data: Admissible operating voltage: AC 110...240 V, 50...60 Hz Example of connection: Operating temperature range: approx. - 30 ...+ 60 The shown accessories are not included! Max. admissible current: 6 A (constant duty: 3 A) At 110 V~ this corresponds to maximally 600 Watt or constant duty 300 Watt, respectively, or to maximally 1200 Watt or constant duty 600 Watt, respectively, at 230V~ Duty cycle: 100 % at 3 A or 20 % (max. 3 min.) at 6 A, respectively Control: via a firmly connected rotary potentiometer Loads: for ohmic or inductive loads Dimensions: approx. 61 x 35 x 23 mm
Available attachments: auxiliary module M150 DC and Pulse Converter. When superposing this module, it is also possible to control the dimmer module M012 with control voltages (1...5 V= or 3...12 V= or 6...24 V=) or with TTL pulses (optionally in each case).
230V~
Price: 16.30
Load (e.g. lamp)
M013 Twilight switch

This electronic twilight switch connects automatically by means of an installed relay lamps (e.g. energy saving lamps) or other consumers at nightfall and off again at daybreak. The module may also work the other way round: on at daybreak (for advertising displays, fountains etc.) and off at nightfall. Floating loads up to 3 A may be switched. Operating voltage: 220...240 V~. Technical data: Operating voltage: 210...240 V~ Current consumption: < 40 mA Switching contact (floating): 1 x switch-over max. load 3 A (resistive load) max. 1 A (inductive load) Turn-on brightness: approx. 10 Lux 50 % Turn-off brightness: approx. 60 Lux 50 Delay in reaction: approx. 30 sec. 50 % Temperature range: approx. - 15C...+ 40C Dimensions: approx. 70 x 60 x 22 mm (without fastening straps)
Price: 10.80
M015N Potential transformer, adjustable,

max. 1,5 A, input: 628 V= output: 315 V=
The input voltage must be at least 3 V higher than the adjusted output voltage. The adjusted output voltage is stabilized or short circuit-proof. For operation of appliances with lower voltages at a 12 V or 24 V car battery or power supplies. Technical data: Input voltage: 628 V= Output voltage adjustable: 315 V (electronically stabilized) Note: The input voltage must be at least 3 V higher than the adjusted output voltage Max. output current: 1,5 A Max. dissipation: approx. 3 W without heat sink, approx. 10 W with heat sink (not enclosed) Dimensions: approx. 59 x 44 x 20 mm (without fastening straps)
Price: 10.80
36/GB
Kemo Electronic
M016 Loudspeaker separating filter 3-way 4...8 Ohm, max. 120 W
For one bass speaker, mid speaker and one till two tweeter. 4...8 Ohm, Separating frequency: approx. 800 / 5000 Hz, 6 dB. Technical data: Max. music load: 120 Watt Filter frequencies: approx. 800 / 5000 Hz Edge steepness: approx. 6 dB For loudspeaker: 4...8 Ohm Dimensions: approx. 67 x 65 x 37 mm (without fixing straps)
Kemo Modules
bass/middle/tweeter
Price: 5.50
M019 Automatic light switch 230 V~ time switch approx. 1 sec. to 15 min.
....connects other devices by means of the installed, potential-free relay point 1 x change over (max. 3 A) after key depression and disconnects them again automatically at the end of the adjusted time. The time lapse may be stopped at any time by pressing the second key. Use: automatic time switch for staircase lighting, for exposure devices, alarm devices, electric toys etc. In addition a potentiometer 1 M lin. and 2 push-buttons for "Start" and "Stop" are necessary. Technical data: Operating voltage: 230 Volt~ Max. breaking capacity: 3 A, 1 x change over Duration: approx. 1 sec....> 15 min. Dimensions: approx. 120 x 50 x 24 mm
Price: 13.40
M020 Voltage transformer from 24 V= to approx. 13.8 V= (for 12 V= devices), max. 1.1 A
With this module you may operate 12 V= devices at a 24 V= truck or marine engine battery. Maximum 1,1 A. Several modules may be connected in parallel if the power shall be increased, e.g. 2 modules do 2,2 A. Technical data: Input voltage: approx. 24....30 V Output voltage: approx. 13.8 V (for 12 V devices) Loading capacity: max. 1.1 A (3 min. 5 % duty cycle), continuous power: 0.5 A Temperature range: approx. - 15...+ 50 degree C Several modules may be connected in parallel to increase the power. Dimensions: approx. 60 x 45 x 20 mm (without fixing straps)
Price: 10.80
M028 Power control 110...240 V~ 2600 VA

Control of resistive + inductive loads (e.g. motors, heatings, incandescent lamps, etc., if they are phasecontrollable). It is not possible to control: e.g. fluorescent lamps, motors with starting capacitor. Required potentiometer: 470 K lin (not attached). Operating voltage: 110...240 V~, max. current 12 A. At 110 V~ this corresponds to max. 1320 VA and to max. 2880 VA at 240 V~. Technical data: Dimensions: approx. 60 x 56 x 23 mm (without fixing straps) load
Price: 19.00
Available attachments: auxiliary module M150 DC + Puls Converter. When superposing this module, it also possible to control the dimmer module M028 with control voltages (1...5 V= or 3...12 V= or 6...24 V=) or with TTL pulses (optionally in each case), M150 see page 58.
470 k lin 230 V~
Example of connection: The shown accessories are not included!
37/GB
Kemo Electronic
M028N Power control 110...240 V~ 4000 VA
For controlling ohmic + inductive loads (e.g. motors, heating, incandescent lamps etc. if these can be regulated in phase control). With this module it is possible to regulate with control voltages or digital signals instead of the potentiometer. Technical data: Operating voltage: 110...240 V AC Max. current: 18 A when mounting on a heat sink. Without additional heat sink: max. 6 A (peak: max. 25 A/10 sec.) Regulation: phase control Connectable loads: ohmic + inductive loads (see circuit description) Dimensions: approx. 86 x 60 x 33 mm Available attachments: auxiliary module M150 DC + Puls Converter. When superposing this module, it also possible to control the dimmer module M028N with control voltages (1...5 V= or 3...12 V= or 6...24 V=) or with TTL pulses (optionally in each case), M150 see page 58.
Kemo Modules
fuse
230 V~
470 k lin load
Price: 23.80
M029 Voltage converter input: 6...14 V=, output: 11...26 V=

This electronically controllable DC voltage converter transforms a low input voltage in to a nearly twice as high output voltage. Max. output current: approx. 2 ampere. Output voltage decreases whenever there is a higher load. With the help of an additional potentiometer of 4,7 k lin. output voltage can be limited towards higher rates at input voltages of over 10 V. Technical data: Input voltage: 6...14 V direct current Output voltage: 11...26 V direct current (depending on load) Output current: max. 2 A fuse 5A Dimensions: approx. 70 x 73 x 26 mm (without fixing straps) input + 6...14V= -
Price: 21.60
output 11...26V=
-+
+ Poti
M031N Universal amplifier 3,5 W

4,5...12 Volt=, approx. 40...20.000 Hz. For loudspeaker 4...16 Ohm. Input sensitivity: < 80 mV. Technical data: Output: max. 3.5 Watt music power Operating voltage: 4.512 V= Loudspeaker connection: 416 Ohm Input sensitivity: < 80 mV Frequency response: approx. 4020.000 Hz Dimensions: approx. 40 x 40 x 12 mm (without fixing straps) earth Loudspeaker input
Available accessory: M040 Universal preamplifier, see page 40

4,5...12 V=
Poti
Price: 8.10
M032 Universal amplifier 12 W

6...16 Volt, approx. 40...20.000 Hz. For loudspeaker 4...16 Ohm. Input sensitivity: approx. 80 mV. Musical power: max. 12 W. Technical data: Operating voltage: 6...16 V= Current consumption: max. 800 mA Input sensitivity: < 80 mV Loudspeaker connection: 4...16 Ohm Music power: max. 12 W with 16 V at a 4-Ohm loudspeaker Frequency response: approx. 40...20.000 Hz Poti 10 Dimensions: approx. 62 x 36 x 23 mm (without fixing straps)
Speaker
Input
Ground
Price: 10.80
6...16 V=
38/GB
Kemo Electronic
M032S Universal Amplifier 12 W "Plug & Play"
Amplifying module with jacks used for the signal input and for the power supply. Inserted loudspeaker regulator and loudspeaker connection are over the cables. Technical data: Operating voltage: 6...16 V= Current consumption: max. 800 mA Input sensitivity: < 80 mV Loudspeaker connection: 4...16 ohm Music power: max. 12 W with 16 V at a 4 ohm loudspeaker Frequency response: approx. 40...20.000 Hz Dimensions: approx. 71 x 50 x 42 mm (without fixing straps)
Kemo Modules
Price: 16.30
M033 Universal amplifier 18 W

6...20 Volt, approx. 40...20.000 Hz. For loudspeaker 4...16 Ohm. Input sensitivity: approx. 80 mV. Musical power: max. 18 W. Technical data: Operating voltage: 6...20 V= Current consumption: max. 800 mA Input sensitivity: < 80 mV Loudspeaker connection: 4...16 Ohm Music power: max. 18 W with 20 V at a 4-Ohm loudspeaker Frequency response: approx. 40...20.000 Hz Poti 10 k Dimensions: approx. 62 x 36 x 23 mm (without fixing straps)
Speaker
Input
Ground
Price: 13.40
6...20 V=
M034 Power amplifier 40 W

6...16 Volt, for loudspeaker 4...8 Ohm, frequency range: approx. 20...25.000 Hz, sensitivity: approx. 500 mV. Technical data: Musical power: max. 40 W at 4 Ohm loudspeaker load in case of an operating voltage of 16 V Operating voltage: 616 V Connectable loudspeakers: 48 Ohm Example of connection: Sensitivity: < 500 mV The shown accessories are not included! Frequency range: approx. 2025.000 Hz Loudspeaker Dimensions: approx. 70 x 45 x 29 mm
Poti 10 k log.
Price: 21.60
Fuse F 4 A
6...16 Volt
Input
M038N Converter from 24 V= to 12 V= (13,8 V=), max. 3 A

...for operation of 12 Volt= devices at a 24 Volt= lorry or boat battery. Short circuit-proof, shock-proof module. This power-potential transformer module has to be mounted on a heat sink or the like if the maximum power shall be drawn as continuous duty. The module is short circuit-proof and has a built-in thermal circuit breaker which disconnects in case of overheating. Application: to operate larger car radios, CB radio equipment etc. at a 24 V lorry or bus battery. Technical data: Input voltage: 24...26 V Output voltage: 13,8 V (equivalent to a full loaded 12 V battery) Maximum current: 3 A Dimensions: approx. 86 x 60 x 32 mm
Price: 13.40
39/GB
Kemo Electronic
M039 Power supply approx. 1,2...30 V=, 2 A
Steplessly adjustable, stabilized power supply with integrated rectifying + filtering. Adjustable in 2 stages: stage 1 : approx. 1,2 V...12 V, stage 2 : approx. 12 V...30 V. For operation is required: 1 potentiometer 10 k lin. 1 transformer 2 x 12 V 2 A, 1 switch 1 x change over 2 ampere 1 cooling element approx. 10 x 8 x 5 cm or larger. Technical data: Operating voltage: approx. 2 x 12 V~, 2 A Output voltage: approx. 1,2...30 V= adjustable Max. current load: 2 Ampere Required potentiometer: 10 k Ohm lin. Dimensions: approx. 82 x 73 x 33 mm power transformer input: 230 V~ output: 2 x 12 V~ max. 2 A
Kemo Modules
output Poti 10 k Ohm linear
Price: 16.30
switch
M040 Universal preamplifier

...for microphones and diverse usages. Operating voltage: 9...24 V=. Frequency range: approx. 10 Hz...100 kHz. Input: approx. 2...50 mV. Output: approx. 200 mV to 1 V. This mini module is simply connected between a power amplifier (e.g. Kemo M032 or M032S 12 W) and a weak signal source (e.g. microphones). Technical data: Operating voltage: approx. 9...24 V= Input voltage: approx. 2...50 mV Output voltage: approx. 200 mV...1 V Amplification: approx. 65 x at UB 9 V, approx. 80 x at UB 12 V, approx. 100 x at UB 24 V Current consumtion: < 2 mA output Dimensions: approx. 30 x 25 x 15 mm
Price: 8.10
9...24 V=
input
M043 Solar discharge protection module

...prevents reverse current (discharge) between solar elements and accus, whenever the solar elements do not create much current because of inferior light conditions. Voltage loss merely approx. 0,35 V at 300 mA! Max. 1,5 A. Technical data: Connection: cable connection Max. current load: 1,5 Ampere Dimensions: approx. 25 x 22 x 17 mm
Price: 3.70
green
red to the accus
M045 Cross-over network 3-ways, max. 120 W

For one bass speaker, mid speaker and one or two tweeter 4...8 ohm. Separating frequency: approx. 800 / 5000 Hz. The rate of change of the attenuation is 12 dB / octave. Technical data: Type: 3-way separating filter Max. power: 120 Watt Speaker connection: 4...8 Ohm Separating frequencies: 800 / 5000 Hz Dimensions: approx. 67 x 65 x 37 mm
Price: 8.10
input to the amplifier
bass tweeter middle
40/GB
Kemo Electronic
M046 Cross-over network 2-way, 4...8 Ohm max. 120 W
Cross-over network, separating frequency: approx. 3000 Hz. 12 dB. Usage: For one bass speaker and mid range/tweeter or one wide range and one tweeter (dynamic or piezo). Technical data: Max. load: 120 Watt Separating frequency: approx. 3000 Hz, 12 dB For loudspeaker: 4...8 Ohm Dimensions: approx. 60 x 45 x 20 mm (without fixing straps)
Kemo Modules
Price: 5.50
input to the amplifier bass tweeter
M048 Ultrasonic generator

Through ultrasonic sounds it is possible to scare away animals and insects: e.g. rats, mice, martens, wild rabbits, mosquitoes. If mounted at the car, roe will be put to rout (decreased danger of accidents). The pulsating audio frequency is adjustable from approx. 10...40 kHz ( 20%). Operating voltage: 12...15 Volt=. For connection of a piezo-treble loudspeaker. The module is an ideal aid to scare away destructive animals out of your pantry, kitchen, storehouses, garden, etc. Also to be used as dog whistle. There are some birds species which will be scared away out of your fruit trees. Technical data: Operating voltage: 12...15 V= Current consumption: < 50 mA Loudspeaker output: only for up to 5 piezo loudspeakers! Audio frequency: adjustable approx. 10...40 kHz ( 20%) Dimensions: approx. 60 x 45 x 23 mm (without fixing straps)
Recommended piezo-tweeter L001, L002, L003 + P5123, see page 63.
Price: 10.80
M050 Transformer control

With this transformer voltage control module it is possible to regulate mains transformer 230 V~ (max. 400 W) at the input side (primary) in the power between approx. 5...95 %. Required potentiometer: 500 k. Usage: Construction of regulable high-power mains controls, a.c. voltage mains supplies, control of transformers for low-voltage halogen lamps, control of high-voltage transformers etc. Technical data: Operating voltage: 230 V~ Max. power: 400 Watt Required potentiometer: 500 k linear Dimensions: approx. 71 x 49 x 26 mm
mains transformer
Price: 11.80
regulated output voltage
poti 500 k
M055 Stereo amplifier 3 W

Universal stereo amplifier with a wattage of max. 2 x 1.5 W musical power. UB: 3...10 V, F: approx. 20...20.000 Hz. Loudspeaker socket: 8...32 ohms. Sensitivity: < 100 mV. Technical data: Output power: max. 3 W musical power (2 x 1.5 W) Operating voltage: 3...10 V Loudspeaker socket: 8....32 ohms Input sensitivity: < 100 mV Frequency response: approx. 20...20.000 Hz Dimensions: approx. 60 x 44 x 20 mm (without fixing straps)
input left input right
Available accessory: M040 Universal preamplifier, see page 40.
loudspeaker 8 ohm
Price: 10.80
41/GB
+
3...10 V= delay-action fuse 1A
Kemo Electronic
M057 Accumulator charging module, automatic
Constant current charger for accumulators 1,2...18 V=. Reversible charging currents (depending on the accumulator): 0,01...1 A. The charging current adjusts automatically. A transformer is required, too, which has approx. 10 V more voltage than the accumulator. For all accumulators which may be charged with constant current: e.g. NiCd, NiMH, lead or gel accumulators. Not suitable for lithium ion accumulators! Technical data: Accumulators capable of being charged: 1,2....18 V NiCd, NiMH, lead and gel accumulators, not for lithium ion accumulators! Charging current: constant charging current adjustable in steps: approx. 10 - 20 - 50 - 100 - 200 - 500 1000 mA Required transformer AC: always 10 V higher than the voltage of the accumulator to be charged, max. 28 V The maximum output current of the transformer should be higher than the desired charging current of the accumulator. Dimensions: approx. 53 x 45 x 21 mm
Kemo Modules
Price: 16.30
M058N Microwave leakage tester

...indicates leakage radiation at microwave stoves, which flows out through door hinges, rubber sealings or screenings. Microwaves significate a form of high energy which goes through plastic, ceramics and also live tissue. An indispensable device for your health and environmental preservation! Operating voltage 9 V=, indication through LED! Technical data: Operating voltage: 9 V= Display: light-emitting diode Dimensions: approx. 101 x 60 x 26 mm
Price: 5.50
M060 Universal car noise filter

Highly effective, sealed LC-noise filter for cars. The filter has to be placed within the current lead of the disturbing resp. of the disturbed device and will filter a great deal of the interferences. Max. 10 (20) Ampere; maximal operating voltage 48 Volt. Technical data: Operating voltage: max. 48 Volt Current load: max. 10/20 Ampere Dimensions: approx. 47 x 45 x 22 mm
Price: 8.10
M061 Alarm monitor

Small alarm monitor with 2 coloured LED's which quick and alternately flash in a special brightness. Operating voltage: 9...12 V=. Usage: For mounting in cars, window-sills etc. as visible deterrent against thieves. The monitor could be mounted without or in combination with an alarm system. Technical data: Operating voltage: 912 V direct-current voltage Current consumption: approx. 2840 mA Flash period: approx. 36 x per second Dimensions: approx. 30 x 25 x 15 mm M061
M061
red
blue
Price: 5.50
9...12V
switch
42/GB
Kemo Electronic
M062 Mini-fence-high-voltage generator
...produces from a battery voltage of 9...12 Volt a pulsating, weak hightension of approx. 1000 Volt. For electrically operated fences for small animals, as thief-protection etc. Technical data: Operating voltage: 9...12 V= Power consumption: approx. 40 mA Output voltage: pulsating max. 1000 V / 0,5 joule Pulse frequency: approx. 1 Hz (1 pulse per second) High-voltage display: fluorescent lamp Max. permissible high-voltage cable length: 100 m Dimensions: approx. 72 x 50 x 42 mm (without fixing straps) 9...12 V=
Kemo Modules
uncovered cable insulator cap
Price: 16.30
M063 Dimmer 12 V~, 50 W (or 24...48 V~)

....controls continuously 12 V incandescent lamps (e.g. halogen lamps), 12 V heatings, motors (also direct current motors with added rectifier), etc.. Only to be operated at a 12 V~ transformer (50...60 Hz.), not suitable for DC voltage (accumulator)! It is also possible to control 24 V~ (linear potentiometer 2,2 k) or 48 V~ (linear potentiometer 4,7 k) by exchanging the potentiometer. Technical data: Operating voltage: 12 V~ (10...14 V~) 50...60 Hz (for normal iron core transformers only, not for electronic halogen transformers) Working mode: phase control Loading capacity: for ohmic or inductive loads such as lamps, motors, electromagnets etc. up to 50 W (4,5 A) Dimensions: approx. 59 x 44 x 20 mm (without fixing straps) Example for connection of a dc motor with rectification Cooling angle Motor
Price: 16.30
The shown accessories are not included!
Rectifyer Fuse 5 A Control 12 V~
M065 Halogen music light for 12 V~ lamps

Sensitive music light for 12 V glow lamps or halogen lamps up to max. 50 W. For operating the device it is necessary to connect a potentiometer 1 k Ohm lin. in order to control sensitivity. Operating voltage: 12 V transformer (alternating voltage). Not suitable for direct voltage (accu). Technical data: Operating voltage: 12 V~ (transformer) Load: max. 50 W (lamps) Adjustment: through external poti 1 k lin. Connection: at the loudspeaker output of an amplifier or radio Dimensions: approx. 53 x 57 x 28 mm amplifier fuse 4 A Example of connection: The shown accessories are not included!
lamp 12 V
Price: 10.80
poti 1 k
transformer 12 V~
M067 Electronic dog barking

With adjustable sound: similar to a "small dog" up to "big angry dog"!
A battery 9...12 Volt or a stabilized power unit with an output voltage of 9 or 12 Volt (direct voltage) are connected with the module. Please use sufficiently strong batteries or a power unit respectively as the module may have a max. current consumption of up to 400 mA! (The small 9 V (006P microdyne) transistor batteries are not suitable! Dimensions: approx. 60 x 50 x 20 mm
Price: 13.40
43/GB
Kemo Electronic
M068 Electronic card switch
Whenever the corresponding card has been inserted into the card slot, the card switch will switch on. The card will be read optically by 4 infra-red read-heads and will solely react on the correct card. 3 cards are enclosed, coding can be changed. Operating voltage: 9 V=. Usage: switching of devices, machines, alarm systems, dooropener, etc. which should be feasible only for a special circle of persons. The lock has an installed relay by means of which it is possible to connect loads up to 1 A, 48 V. Technical data: Operating voltage: 9 V= Output: relay contact 1 x ON, max. 1 A, 48 V Operating mode: optical with 4 infrared-reflex reading heads Card dimensions: approx. 85 x 54 mm (3 cards enclosed) Module dimensions: approx. 80 x 35 x 70 mm
Kemo Modules
operating voltage
battery 9 V=
blue
green
red
green switching of devices: (e.g. dooropeners) max. 1 A, 48 V
Price: 7.80
M068-5 Substitutional cards for M068 electronic card switch (5 pieces)

Price: 8.10
M069 Electronic underground rodent pest repeller

This waterproof module emits in rapid intervals aggressive seismic oscillations, which are widely radiated underground and are mostly avoided by root voles, moles and similar rodents. The module has to be digged near the animal tunnels and is operated through a cable with operating voltage of 9 V. One module will be enough for approx. 1.000 m of garden. Technical data: Operating voltage: 9 Volt= Input current: approx. 150 mA Usage: underground Dimensions: approx. 72 x 50 x 35 mm
Price: 16.30
M071N Ultrasonic vermin repellent

This ultrasonic generator produces pulsating and aggressive ultrasonic sounds like a siren which many animals perceive as extremely unpleasant and, therefore, try to avoid as far as possible. The generator should be used to keep away rodents, insects, crawling parasites, game and birds, etc. The frequency of the generator is adjustable between approx. 8...40 kHz. A special loudspeaker with vaulted aluminium spherical membrane has been built in to achieve a better sound distribution. A stabilised power supply 12 V (< 60 mA) is necessary for setting into operation. Technical data: Operating voltage: 12 V (10...13.8 V) DC voltage Current consumption: < approx. 60 mA Adjustable frequency: approx. 8...40 kHz ( 15 %) Frequency deviation, approx. 2 x per second: approx. 2...3 kHz (automatic change of frequency, siren-like) Sound pressure: max. 100 dB 15 % Range: > 40 m with free field of vision Loudspeakers beam angle: max. 140 degrees Connection of additional piezoelectric loudspeakers: max. 4 additional loudspeakers may be connected Please do only use the additional loudspeakers approved by Kemo: L001, L002, L003, P5123 Functional display: blinking LED Connection: via free cables Dimensions: approx. 72 x 50 x 31 mm (without fixing straps)
Available accessories: L001, L002, L003 and P5123, see page 63
Price: 19.50
44/GB
Kemo Electronic
M073 Motorbike alarm
Kemo Modules
...switches automatically a horn or a siren on, if the motorbike should be moved from a parking position to any other one. A waterproof and shakeproof sealed module. Also to be used to protect any other objects, which are not to be moved. Technical data: Example of connection: Connection power: max. 1 Ampere The shown accessories are not included! Switching voltage: maximal 40 Volt Operating voltage: no need of own operating voltage switch Dimensions: approx. 18 x 15 x 12 mm (without fixing straps) siren accu
Price: 5.50
chassis
chassis
M077 Flasher 5...12 V=, max. 1 A

Electronic flashing device for glow lamps up to max. 1 Ampere current load. Operating voltage: 5...12 Volt DC voltage. Flashing period: approx. 2...4 Hz (approx. 120...240 flashing pulses per minute). Flashing / rest relation: approx. 50 : 50 %. Technical data: Operating voltage: 512 V= (depending on the connected lamp) Max. current of the lamp: 1 A Flash period: approx. 24 Hz (approx. 120240 flash impulses per minute) Dimensions: approx. 25 x 22 x 17 mm 5...12 V=
Price: 5.50
M079 Flasher / alternating flasher for 1 to 10 LEDs at maximum

Suitable as flasher or alternating flasher for light emitting diodes. Operating voltage: 6...12 V=. Flashing period: approx. 2...3 Hz (approx. 120...180 flash pulses per minute). Protection against change of polarity, short-circuit-safe, built-in current limitation for LED's. Connecting possibilities for 1...10 LED's. Ideal for use in model construction, for adornment picture or caps with built-in LED's, warning flashers, etc. Technical data: Operating voltage: 6...12 Volt= M079 Output: 2 (alterating flasher) Flash sequence: approx. 2...3 Hz (approx. 120...180 flashing pulses per minute) Flashing / rest relation: approx. 50 : 50 % Dimensions: approx. 18 x 16 x 4 mm
6...12 V=
flattened side flattened side
Price: 3.70
M080 Flasher / alternating flasher for small glow lamps 6...12 V=

It is possible to connect small glow lamps up to a max. current load of 300 mA. Flashing frequency: approx. 2...3 Hz (approx. 120...180 flashing pulses per minute). Suitable as flasher or alternating flasher. Technical data: Operating voltage: 6...12 Volt= Operating mode: flasher or alternating flasher Example of connection: Output: 2 outputs each for max. 300 mA The shown accessories are not included! Flash sequence: approx. 2...3 Hz (120...180 x per minute) Flashing / rest relation: approx. 50 : 50 % Dimensions: approx. 18 x 15 x 12 mm (without fixing straps) 6...12 V=
Price: 5.50
45/GB
Kemo Electronic
M082 DC Flasher 12...24 V=, max. 8 A
Power flasher for glow lamps 12...24 V=, maximum 8 A switching capacity. Simple 2-wire-connection. For direct current (accu or power supply). Flashing sequences: approx. 12...50 times per minute adjustable. Technical data: Operating voltage: 12...24 Volt= Switching voltage: max. 8 A Flash sequence: approx. 12...50 times x per minute Example of connection: The shown accessories are not included! Connection: over 2 cables Dimensions: approx. 71 x 55 x 28 mm
Kemo Modules
Speed
Price: 11.80
Glow lamps 12...24 V=
Accu
M083 Accu-charging regulator 12 V=

This module supervises the charging state of a 12 V car accu and starts charging automatically, whenever there is a drop of voltage. With full accus the module will switch off and supervise the accu. Suitable for accus placed in alarm systems, weekend-houses, caravans etc. in order to keep accus constantly charged without the risk of overcharging. Also suitable as charging regulator for solar surfaces. Charging current maximum 1,5 A. Short circuit and reverse current proof. Automatic charging interruption with accu voltage of approx. 13,8...14,2 V. Technical data: Input voltage: 16...20 V= (solar panel or power supply) Output: regulated for charging a 12 V accumulator to max. 13.8...14.2 V Output current: 0...1.5 A depending on the charging state of the accumulator Dimensions: approx. 60 x 45 x 20 mm (without fixing straps)
The cable may not exceed 2 m!
Price: 10.80
Input 16...20 V=
Accu 12 V
M084 Telephone voltage protection

This module has to be connected parallel to the telephone leads. It is an efficient protection for you and for your valuable telephone unit against overvoltages as happening during lightnings, static chargings, too high external voltages from the neighbourhood, etc. which may penetrate your telephone socket. It is possible that high voltages of more than (>) approx. 120 V are deflected. Impulse circuit capacity up to 40 Ampere! This module has no Postal permission and should be used exclusively like a great deal of other telephone accessories within private telephone units without public exchange connection. Technical data: Example of connection: Connection: 2 leads, parallel to the phone leads The shown accessories are not included! Shunt conductance: > approx. 120 V Impuls current-carrying capacity: max. 40 A / 0,5 seconds Dimensions: approx. 47 x 45 x 22 mm terminal telephone plug
Price: 5.50
M085 Infrared detector

With the aid of this "Infrared Detector" it is made possible to carry out functional tests with infrared remote controls units, infrared transmitters in light barriers, etc. This module consists of an infrared receiver which indicates through switching on a light emitting diode, if the remote control on test emits infrared radiation. Suitable for most of the remote controls and transmitters. An indispensable test equipment for radio and TV workshops and also for hobbyists. Technical data: Operating voltage: 9 V= Current consumption: < 8 mA Sensitivity: the whole light spectrum from visible light to infrared Display: via a light-emitting diode Dimensions: approx. 30 x 59 x 20 mm (without fastening straps, with light tube)
The shown accessory is not included!
Price: 5.80
46/GB
Kemo Electronic
M087 LED tester
With the aid of this test module it is made possible to carry out tests with all kinds of light emitting diodes in order to check function, brightness, colour and polarity. The LED's could be tested optionally with following currents: approx. 1 mA, 2,5 mA, 5 mA, 10 mA, 20 mA and 50 mA. It is feasible to insert into the test contacts brand-new LED's as well as soldered out LED's with residual soldering tin at the connecting pins. In order to facilitate selection of LED's of equal brightness, there have been placed two test sockets with the same currents (10 mA) side by side. Necessary: battery 9 V. Technical data: Operating voltage: 9 V battery LED-connection: contact eyes LED-testing currents: optional 1, 2.5, 5, 10, 20, 50 mA Dimensions: approx. 58 x 44 x 25 mm
Kemo Modules
Example of connection: The shown accessory is not included!
Price: 7.80
M094 Marten-repeller 12...15 V=

...produces intensively pulsating ultrasonic sounds which are found by martens and similar rodents especially unbearable, and therefore is capable to scare away these animals. This "Marten Repeller" includes 4 small ultrasonic loudspeakers to achieve a profitable radiation of the ultrasonic sound. The frequency is adjustable (approx. 10...40 kHz, 20 %). Indication of operation through light emitting diode. Operating voltage: 12...15 V=. Usage: This module is able to scare away martens from the engine compartment of cars and lorries, place where these animals use to gnaw at cables and other plastic parts! Or to be used in pantries, in the cellar or attic! Technical data: Operating voltage: 12...15 V= Current consumption: at 12 V < 0,05 A Loudspeaker output: only for piezo loudspeakers Audio frequency: adjustable approx. 10...40 kHz ( 20 %) Dimensions piezo loudspeaker: approx. 30 mm x 13 mm Dimensions: approx. 60 x 45 x 23 mm (without fixing straps)
12...15 V=
Available accessories: L001, L002 and P5123, see page 63
Price: 18.90
M100N Anti marten devices for motor vehicles

...produces aggressive ultrasonic sounds not audible to men which martens find extremely annoying and so try to avoid them, if possible. To be mounted in the engine compartment of motor vehicles. Ultrasonic marten repellent for use in cars, houses and lofts. Produces enormously loud and pulsating ultrasonic sounds. Operating voltage: 11...15 V=, average power consumption < 2 mA, frequency: approx. 23 kHz. Angle of radiation with a special spherical surface tweeter with about 140 degrees, max. approx. 100 dB 20%. Technical data: Operating voltage: 11...15 V= Power consumption: < 2 mA Frequency: approx. 23 kHz Angle of radiation: about 140 degrees Power of radiation: max. approx. 100 dB 20 % Dimensions: approx. 72 x 50 x 28 mm (without fixing straps)
fuse 0,5 A
+
11...15 V= (battery) - 11...15 V= (car chassis / ground)
Available accessory, page 37: M020 Voltage transformer from 24 V= to approx. 13,8 V=, (for 12 V-devices), max. 1,1 A
Price: 16.30
47/GB
Kemo Electronic
M101 Decalcifier against calcification and corrosion in water pipes!
This module is not harmful to the environment, i.e. without chemicals and operates on a physical-inductive base. Easy to mount, no intervention into conduits! This module protects washing machines, dish washers, heating boilers etc. Operating voltage: 230 V~. Technical data: Operating voltage: AC 230 V~ (firmly connected via the enclosed plug power supply) Current consumption: < 3 W Dimensions (without power supply): approx. 67 x 68 x 40 mm
Kemo Modules
Plug power supply is included!
Price: 19,80
Only for indoor use!
Water pipe
Distance 4 cm
M101A Decalcifier against calcification and corrosion in water pipes!

This module is not harmful to the environment, i.e. without chemicals and operates on a physical-inductive base. Easy to mount, no intervention into conduits! This module protects washing machines, boilers etc. Operation with a plug power supply 6...15 V=. Current load: < 130 mA (Plug power supply is not included!). Technical data: Operating voltage: 615 V= Current consumption: < 130 mA Alternating field frequency: < 2000 Hz Dimensions: approx. 72 x 50 x 28 mm (without fixing straps) Oscillation transmission: with 2 cables which have to be coiled up helically on the water pipe (approx. 310 turns each).
ca.4 cm
Plug power supply is not included!
Water pipe
Price: 8.10
M102N Second accumulator charger 6...24 V=

For lead accumulators 6 to 24 V. With this accumulator separating filter 2 accumulators are charged separately at one source of charging current (vehicle generator, solar systems, windmills, chargers etc). For charging currents up to 10 A at maximum (with cooling 20 A). The charging current distributes in such a manner that an empty accumulator will be charged more than an accumulator that is almost charged. It is perfect for motor caravans if one accumulator operates the television, radio etc. and the second accumulator must remain charged in order to start the motor. Or for weekend cottages if one accumulator used for the alarm system must not be emptied. Technical data: Accumulators to be connected: 2 each of the same voltage 6...24 V= Max. charging current: 10 A (with cooling max. 20 A (total current) Dimensions: approx. 84 x 58 x 33 mm
Input charging voltage (from charging regulator)
+
Ground Fuse 20 A
Price: 10.80
Accu 1
Accu 2
M103 Master-slave 230 V~

...connects or disconnects automatically another load with a potential-free contact upon starting a machine, lamp etc. The module is simply looped in a lead of the electric mains of the machine. Consequently, it is not necessary to intervene in the machine. Suitable for consumers of 230 V alternating voltage or 410 V threephase current. For consumers 250...4000 W. The switching contact (1 x switch over) may be loaded with max. 10 A. Use: Automatic connection of a vacuum cleaner when switching on a machine, automatic safetycutoff when starting another machine, delayed (approx. 0.5 sec.) automatic connection of a second machine if the house fuse blows in case of simultaneous connection. Technical data: Voltage: 230 V~/410 V AC Contact: 1 x switch over , max. 10 A Dimensions: approx. 65 x 67 x 37 mm consumer 2 kW...4 kW
Second device which is to be connected automatically
Price: 16.30
48/GB
Kemo Electronic
Kits and modules for computers
Kemo Modules
With the modules M104 to M110, M117 and the kit B210 "Relay Card" and B240 Computer Laser Show we have developed a series of interesting kits and modules which can be operated at normal standard AT-computers. The kits and modules can be operated at all kinds of PCs from type '286 till the Pentium computer. Each kit or module includes the software in form of a 3,5" diskette. The printer connection at the PC "LPT1" or "LPT2" serves as interface between the computer and the module or the kit. You may for example control d.c. motors (M107) or stepper motors (M106, M109) with these modules. It is possible to control up to 4 motors with the computer program and so you may for example program the motions of a robot. Or you may program the trains of your model railway. You may also program the water pumps of a fountain in such a manner that the water fountains rise to the rhythm of the music.
M104 4-Channel computer switch
LPT1-Port Computer The operating voltage of the modul corresponds to the operating voltage to the connected consumers.
...for switching up to 4 different appliances, lamps or motors by means of a computer program. Consumers with operating voltages of 6...24 V=, max. 2 A direct current can be controlled. By means of the enclosed software it is possible to switch on and off appliances at certain times, specific switching sequences (also for several days) can be programmed, running light effects etc.! Connect the module at the printer port of a standard PC. A floppy disk containing an MS-DOS and WINDOWS program, respectively, is enclosed. Technical data: Connection: at the printer port of the computer at the LPT1 port with built-in 25-pole SB-D plug Switching outputs: via a built-in 25-pole SUB-D socket board Channels: 4 For the connection Loading capacity per channel: 6...24 V= max. 2 A total current connected simultaneously to the modul a Triggering: via the enclosed PC software MS-DOS or WIN XX or XP. The extensive software allows many fitting connector is different triggerings, triggering programs that can be saved, switch clock functions, etc. needed. Display: indication of the switching condition via 4 built-in LEDs Separation PC / load: via 4 optocouplers Dimensions: approx. 73 x 56 x 30 mm
fuse 2 A 6...24 Volt=
Consumers like lamps, motors, appliances etc.
Price: 27.50
M106 Stepper motor-interface 4 pin

...for controlling a 4-lane step motor (bipolar) 3...17 V, max. 2 A. A double power pack (split power supply) is required for the current supply. For connection to a standard AT-PC from type '486 on. The motor may either be controlled by hand with the computer keyboard or via a program with an automatic program flow which has been written before. By means of an interface switch (M108) it is possible to operate up to 4 step motors at the same time via individual step motor interfaces respectively. Software DOS + Windows (98, NT, 2000, XP) (diskette 3,5" is enclosed). Technical data: Operating voltage: 418 V split power supply. Double DC voltage, dependent on the connected motor (always 1 V more than the motor requires) Motor connection: 1 bipolar stepper motor 4 connections 317 V max. 2 A Example of connection: Connector: 25 poles for connection to the PC printer port LPT1 The shown accessories are not included! Dimensions: approx. 120 x 50 x 24 mm
Disc 3,5" is enclosed! Fitting 4-fold interface switch: M108, see page 50 Available accessories (see page 51): P5108 Stepper motor Berger RDM57 P5110 Mini-stepper motor RDM37 P5111 Stepper motor AEG S026/48-4 pin P5111-15 Stepper motor AEG S026/48-4 pin P5113 Mini-stepper motor "Siemens 1BC 2720-68N" P5337 Mini-stepper motor AEG S021/24 P5341 Micro-stepper motor, oval mounting plate P5342 Micro-stepper motor, rectangular mounting plate
diodes 3A or battery fuse 2A
Price: 27.50
M107 DC-motor-interface
...for controlling a direct-voltage motor (DC battery motor with brushes at the collector) 5...24 V, max. 2 A. A double power pack (split power supply) is required for the current supply. For connection to a standard AT-PC from type '286 on. The motor may either be controlled by hand with the computer keyboard (number of revolutions, running direction) or via a program with an automatic program flow which has been written before. By means of an interface switch (M108) it is possible to operate up to 4 motors at the same time via individual interface modules motor respectively. Thus complex motions at robots, model railroads etc. can be programmed. Dimensions: approx. 60 x 45 x 21 mm
diodes 3 A
Disc 3,5" is enclosed! Fitting 4-fold interface switch: M108, see page 50
fuse 2 A
or battery
Price: 21.60
49/GB
Kemo Electronic
M108 4-fold Interface switch
By means of this interface switch one may operate 2, 3 or 4 motor interface modules with one motor each at one computer simultaneously. Thus it is possible to operate up to 4 motors at the same time and to programme complex motions, e.g. for robots, machines, model railroads etc. Dimensions: approx. 72 x 50 x 22 mm
Kemo Modules
This interface switch is suitable for our motor interface modules: M106, M107 + M109, see pages 49 + 50
Price: 21.60
M110 Stepper motor-driver 6 pin

A stepper motor (unipolar) with 6 connections can be operated at this module. It is possible to change the direction of rotation of the motor. The number of revolutions of the motor can also be adjusted from approx. 2...1000 Hz (impulse sequence). For motors from 5...12 volt, max. 2 A. The operating voltage of the module depends on the operating voltage of the motor (5...12 volt). Furthermore a potentiometer 1 M linear and a switch 2 x change over are necessary for operation. These parts are not included. The module works without computer and can only control the direction of rotation and the number of revolutions of the motor. A controlled program flow is not possible! Dimensions: approx. 120 x 50 x 24 mm Example of connection:
The shown accessories are not included!
Available stepper motor (see page 51): P5339 Mini-stepper motor "42SPM-24DJA"
5...12V poti 1M Ohm
Price: 27.50
direction of rotation switch 2 x change over
motor
50/GB
Kemo Electronic
P5108 Stepper motor "Berger RDM57"
Stepper motors suitable for the previous modules:

P5337 Mini-stepper motor "AEG SO21/24"
Approx. 24 steps / rotation, bipolar, 4 connections, approx. 8 Ohm per winding. Operating voltage approx. 5 V / 0,625 A. Dimensions without axis approx. 35 x 25 mm, axis approx. 1 x 10 mm.
Approx. 24 steps / rotation, bipolar, 4 connections, approx. 30 Ohm per winding. Operating voltage approx. 10 V / 345 mA. Dimensions without axis approx. 57 x 26 mm, axis approx. 5 x 7 mm.
Price: 4.90
Price: 3.80
P5110 Mini-stepper motor "RDM37"

Approx. 40 steps / rotation, bipolar, 4 connections, approx. 30 Ohm per winding. Operating voltage: approx. 7,5 V / 0,25 A. Dimensions without axis approx. 35 x 22 mm, axis 1 x 10 mm.
P5339 Mini-stepper motor "42 SPM-24 DJA"

Approx. 48 steps / rotation, unipolar, 5 connections, approx. 85 Ohm per winding. Operating voltage approx. 24 V / 282 mA. Dimensions without axis approx. 45 x 23 mm, axis approx. 2 x 15 mm.
Price: 3.80
Price: 4.40
P5111 Stepper motor "AEG SO26/48-4 pin"

Approx. 48 steps / rotation, bipolar, 4 connections, approx. 5 Ohm per winding. Operating voltage approx. 5 V / 1 A. Dimensions without axis approx. 66 x 37 mm, axis approx. 5 x 11 mm.
P5341 Micro-stepper motor, oval mounting plate

Approx. 20 steps / revolution, bipolar, 4 connections, approx. 15 Ohm per winding. Operating voltage 34,5 V, approx. 300 mA. Dimensions (without axle) approx. 20 x 15 mm , axle approx. 1,5 x 4 mm.
Price: 3.80
Price: 3.80
P5111-15 Stepper motor "AEG SO26/48-4 pin"

P5342 Micro-stepper motor,

rectangular mounting plate
Approx. 20 steps / revolution, bipolar, 4 connections, approx. 15 Ohm per winding. Operating voltage 34,5 V, approx. 300 mA. Dimensions (without axle) approx. 20 x 15 mm , axle approx. 1,5 x 4 mm.
Price: 3.80
Price: 3.80
P5113 Mini-stepper motor "Siemens 1BC 2720-68N"

Price: 4.90
51/GB
Kemo Electronic
M111 Marten shock for motor vehicles
Chases away rodents through high-voltage shocks! (Electric fence principle)
Operating voltage: 12 V car battery (< 2 watt). Output voltage: approx. 400...700 V. By means of this you may "charge" contact plates, metal grids, etc. in the engine compartment which have been fixed insulated. Upon contact the marten gets an electric shock and runs away. (It will not be killed). Dimensions: approx. 70 x 44 x 20 mm
Kemo Modules
Price: 13.40
M113N Time switch 12...15 V=, approx. 2 sec. up to 10 (~30) min.
switches other devices on after pressing the key and switches them off again automatically by means of the installed relay point 1 x ON (max. 3 A) when the adjusted time has expired. The lapse of time may be interrupted any time with the second key. Use: exposure devices, charging sets, toys, machines, illumination, etc. 2 pushbuttons formare required in addition for operation as well as a potentiometer 500 k lin. for periods exceeding 10 minutes. Technical data: Do not open the Operating voltage: 1215 V= wire coil! Current consumption: approx. 20 mA / 80 mA (relay off / on) Adjustable time: approx. 2 sec. to 10 min., with an external potentiometer 500 k lin. up to ~ 30 minutes ( 30 %) Connection: via cable outlets at the module Displays: 2 (1 x LED operating voltage, 1 x LED relay ON) fuse 0,5 A Relay point: 1 x ON, max. 3 A max 25 V (The installed relay point may also switch up to 230 V~, but in this case the safety regulations of VDE like protection against accidental contact, etc. have to be observed) 12...15 V= Dimensions: approx. 60 x 45 x 20 mm start stop
Time setting approx. 2 sec. to 10 min. ( 30 %).
lamp
max. 25 V=
Price: 10.80
M114N Flasher, slow 230 V~ / 110 V~

Flasher with adjustable flash period: approx. 0,6...9 seconds turn-on time. Turn-off time approx. 50 % of the turn-on time, respectively. Built-in fuse: T 1,6 A. For electric light bulbs 15...300 Watt, 230 V~ (15...150 W at 110 V~). Use: billboards, model lighthouse etc. Technical data: Operating voltage: 110240 V AC Rupturing capacity: for electric light bulbs 110 V up to max. 150 W at 110 V~ operating voltage, or for electric light bulbs 230 V max. 300 W at 230 V~ operating voltage Minimum load: 15 W Safety fuse: installed 1,6 A delay-action Flash period: approx. 0,69 seconds on-transition time adjustable), disconnecting time approx. 50 % of the on-transition time. Dimensions: approx. 71 x 50 x 41 mm
Safety fuse in the module
flashing speed
Example of connection: The shown accessory is not included!
230 V~ (110 V~)
Glow lamps 230 V, 15...300 Watt (Glow lamps 110 V, 15...150 Watt)
Price: 13.40
52/GB
Kemo Electronic
M115N Marten defence for motor vehicles 12 V=
...chases away martens by means of small high-voltage plates charged electrically to approx. 200...300 V= through electric shock in the engine compartment of the vehicle (only weak current pulses that chase the marten away, but do not kill it) and through strong, aggressively pulsating ultrasonic sounds. Extremely low power consumption (< 0,005 A), switches the battery voltage of < 11.5 V automatically off (does not discharge the battery completely, if vehicles are being parked for quite some time). Technical data: Operating voltage: 12...15 V= (car battery) Average power consumption: < 5 mA Automatic shutoff: if the battery voltage decreases to < 11.5 V ( 5 %) Output voltage: approx. 200....300 V = Ultrasonic frequency: approx. 22 kHz 10 % Acoustic pressure: max. approx. 100 dB 15 % Angle of radiation ultrasonics: approx. 150 degree Loudspeaker: special ceramic piezoelectric loudspeaker with spherical membrane of aluminium Temperature range: approx. - 40...+ 80 degree C Functional display: flashing LED (approx. every 5...12 sec.) Cable length high-voltage cable: 2 x approx. 1.9 m ( 10 %) Fuse in the fuse holder: 500 mA High-voltage contact plates: 6 pieces, approx. 40 x 40 x 1.5 mm each Dimensions basic instrument: approx. 46 x 73 x 145 mm (H x W x D)
Kemo Modules
Mass (car chassis)
terminal 15
High-voltage contact plates which are installed in the motor room at bite endangered places.
Safety switch engine hood (recommended, not included)
Car accumulator 12 V=
Switch at the intrument panel (recommended, not included)
Mass (car chassis)
Price: 52.50
M116 Infrared light barrier approx. 30 m

The light barrier works with infrared light rays invisible to man. Range (maximum distance between transmitter and receiver): approx. 30 meters. If the light ray is interrupted, a relay switches on (1 x switch-over, max. load 1 A). Technical data: Operating voltage transmitter: 12 V=, approx. 10 mA Operating voltage receiver: 12 V=, approx. 10...50 mA Breaking capacity relay: max. 1 A / 24 V Range: max. 30 m Dimensions transmitter: approx. 73 x 50 x 27 mm Dimensions receiver: approx. 73 x 50 x 27 mm Transmitter Receiver
M116
red 12V= brown blue green white yellow 12V= red
Recommended tilted mirror if the infrared ray shall be deviated. K002 Reflector mirror, see page 70
Price: 37.90
M117 Alarm module for computers alarm for house and home, for connection to a computer
This module is to be connected with a PC, from 286 on. 6 alarm circles can be connected. By means of the siren or enclosed software, the alarm circles may be activated individually at different times. The time of alarm, number relay 6...12V of contact operates for triggering alarm etc. may be adjusted or counted individually. The time of the alarm release and of the alarm circle is indicated. It is possible to connect working or rest contacts. Installed pulse amplifier for up to 100 m long cables towards the alarm contact. Excellent automatic unwanted signal blanking against perturbing radiation. Alarm output via a switching transistor for direct triggering of a relay or siren 6...12 V, max. 0,5 A. fuse 6...12V Dimensions: approx. 70 x 55 x 35 mm 0,5 A battery
Floppy disc 3,5" is enclosed. Alarm contacts: A002, A003 and A004 page 71
alarm contacts at doors, windows etc.

Price: 47.50
M119 Master-slave 6...30 V DC

"Current conduction switch", connects or disconnects automatically another device when starting a direct-current device. For example, the radio is disconnected automatically when switching on the CB-radio equipment in the car. Or the amplifier of the radio equipment is connected automatically when the CB-radio transmits. Or the outdoor illumination of a motor caravan is disconnected automatically when switching on the indoor lighting. May also be used for controlling whether lamps at a vehicle light (control of current conduction). The module simply has to be connected in series with the power lead of the device (6...30 V=) and connects and disconnects other devices via a potential-free contact (1 x change over, max. 3 A). The module reacts on currents between approx. 1...5 A. Internal resistance: approx. 0,12 Ohm (currents 1...3 A) or 0,05 Ohm (currents 3...5 A). Dimensions: approx. 60 x 45 x 20 mm car accu 12 V
lamp
Price: 5.80
53/GB
fuse
load 1...3 A
12 V
Kemo Electronic
M120 Infrared spotlight 12...15 V= for CCD-cameras
Kemo Modules
12...15 V=
With the infrared spotlight CCD-cameras may recognize objects also in complete darkness. The infrared light is invisible for men, CCD-cameras can see well with an infrared spotlight. Perfect for inconspicuous observation of entrances, drives etc. Operating voltage: 12...15 V=, < 300 mA. Range: max. 5 m. Dimensions: approx. 71 x 49 x 18 mm direction of radiation
Price: 17.80
M121 CCD-camera-dummy
CCD-camera "dummy" with lens system and 3 infrared spotlight LED dummies. A red LED operating indication is installed. 2 x round cells UM3 are necessary for operation. This camera dummy shall fake a real monitoring camera and thus it shall prevent shoplifting, attacks etc. Dimensions: approx. 90 x 50 x 33 mm
Price: 8.10
M122 Twilight switch 12 V=

...switches on e.g. lamps at nightfall and off again at daybreak. Operating voltage 12 V= (for weekend cottages, sailing yachts, caravans etc.). Distribution output: relay 1 x change over, max. 3 A. Technical data: Operating voltage: 12 V DC voltage (11...14 V) Power consumption: approx. 2 mA / 35 mA (relay on / off) Relay contact: 1 x switch-over, loading capacity max. 25 V 3 A Operating temperature range: approx. - 15...+ 50 degree C Luminous intensity switching-on: approx. 25 lux 20 % Luminous intensity switching-off: approx. 45 lux 20 % Switching delay: approx. 3...4 seconds The sensitivity of the luminous intensity may be changed by partially covering the sensor mechanically. Dimensions: approx. 72 x 50 x 32 mm (without fixing straps) operating voltage for lamp
fuse 0,2 A 12 V= Switching-on of the lamp at dusk, switching-off of the lamp in daylight.
fuse 3 A
Price: 9.80
cooling angle
M124 Light sweller 12 V=, max. 24 W

This light sweller regulates incandescent lamps (halogen lamps, too) slowly from "dark" to "light" and back again in continuously recurring succession. (Like a flasher, apart from the fact that the lamps do not blink but slowly become light and dark again). Swelling sequence: approx. every 5...8 sec. Operating voltage: 8...15 V=, max. lamp load: 2 A. Dimensions: approx. 60 x 45 x 20 mm 12 Volt = fuse 2A one or several bulbs 12 V, maximum output 24 W
Price: 16.30
LPT1-Port
M125 Relay module 8-channel for PCs from 486 upwards

Relay module for switching up to 8 different appliances, lamps or motors according to a computer program (software is enclosed). The installed solid-state-relays may switch voltages up to 40 V and loads up to 0,4 A (DC) or 0,2 A (AC). Higher loads must be switched via auxiliary relays. The module is operated at the printer port LPT1. Scope of delivery M125: 1 relay module M125 / 1 software disc 8 channel computer switch. Dimensions: approx. 73 x 56 x 29 mm
relay 12 V
M125
6...40 V=
Price: 19.80
54/GB
Example for switching 7 incandescent lamp-channels and 1 relay for switching higher loads
Kemo Electronic
M126N Electronic key 12 V=
When holding the enclosed transponder key pendant in front of the module (distance approx. 3...6 mm), a relay switches on. Application: Contactless door opener to switch appliances etc. The module may also be hidden behind nameplates, too. Operating voltage: 12 V= 0,03 A. The key does not need a battery! Substitute transponder keys may be ordered under order no. M131N. All keys lock in the same manner (cannot be programmed individually). Technical data: Operating voltage: 12 V= stabiliszd Current consumption: < 30 mA Transponder frequency: approx 128 kHz Switching distance: in case of Kemo transponder key M131N, in case of mini-transponder key E55XX or TK55XX approx. 2 mm Relay contact: 1 x ON max. 25 V, 0,2 A AC or DC (solid-state-relay R-on: max. 12 Ohm) Turn-on pulse length: approx. 2 sec. (after removing the transponder key the relay remains switched on for 2 sec.) Operating temperature range: approx. - 20...+ 40 degree C Dimensions of the module: approx. 40 x 40 x 12 mm (without fastening straps)
Kemo Modules
M126N
Available accessories: M131N, E55XX + TK55XX
Price: 15.80
M131N Electronic spare key ring

for M126N + B231
Electronic spare key ring for the modul M126N + B231. No battery necessary! Dimensions: approx. 30 x 10 x 6 mm
Price: 3.80
E55XX Transponder key - GLAS Substitute transponder key for the electronic lock "Kemo no. M126N", frequency: approx. 125...128 kHz, switching distance: approx. 1...2 mm. Hold the black tip of the glass tube in the centre of the switching surface of the switching module M126N to trigger switching. Dimensions: approx. 2 x 12 mm
Price: 5.50
TK55XX Transponder key - PLAST Substitute transponder key for the electronic lock "Kemo no. M126N", frequency: approx. 125...128 kHz, switching distance: approx. 2...5 mm. Please hold the black tip of the plastic part in the centre of the switching surface of the switching module M126N to trigger switching. Dimensions: approx. 12 x 6 x 3 mm
Price: 5.50
M128 HF-Detector (Mini Spy Finder)

By means of this searching device bugging devices which are active in the room, computer or telephone can be located. Thus it is possible to find hidden bugging devices (bugs, mini spys). The device responds to bugging devices with transmitting frequencies of 100 kHz2.4 GHz with transmitter powers usual for bugs. Display: 1 x LED for the turn-on control, 1 LED for indication of receipt from one transmitter (the closer you get to the transmitter, the faster this LED flashes). A 9V compound battery is necessary for operation. Technical data: Operating voltage: 9 V compound battery Current consumption: < 10 mA Reception frequency: approx. 0,1 MHz 2,4 GHz Display: light-emitting diode display Dimensions: approx. 102 x 61 x 26 mm (without antenna)
Price: 27.50
55/GB
Kemo Electronic
M135 Light barrier 4 m
Kemo Modules
Ready assembled infrared light barrier with transmitter and receiver. Range: more than 4 metres. If the infrared light ray is interrupted (if a person walks through), a relay switches for approx. 0,5...7 seconds (adjustable). Thus it is possible to switch on a bell, counter or lamp or the like for this period. Operating voltage: 12 V= relay point 1 x ON max. 3 A 25 V. Technical data: Operating voltage: 12 V= Relaycontact: 1 x ON max. 3 A 25 V Dimensions transmitter: approx. 40 x 25 x 21 mm (with fixing straps) Dimensions receiver: approx. 91 x 40 x 47 mm (with fixing straps)
Recommended tilted mirror, if the infrared ray shall be deviated: K002 Reflector mirror, see page 70
Price: 27.50
M136 LED-Signal lamp red, 12 V=

Signal lamp equipped with 39 very bright red LEDs. Potted electronics for rough use in industry, machine halls or for the discotheque at home, medical practice etc. Fastening: surface with 2 screw loops. Operating voltage: 12 V=, < 150 mA, when using the enclosed protective resistor also for 24 V=. Dimensions: approx. 51 mm, 51 mm long
red 12 V=
blue
Available accessory: When adding the Flasher M077, the LED signal lamp flashes (only for 12 V= operating voltage, module M077 is not enclosed). For M077 see page 45.
Price: 13.40
M137 LED-Signal lamp, green 12 V=

Signal lamp equipped with 39 green LEDs. Potted electronics for rough use in industry, machine halls or for the discotheque at home, medical practice etc. Fastening: surface with 2 screw loops. Operating voltage: 12 V=, < 150 mA, when using the enclosed protective resistor also for 24 V=. Dimensions: approx. 51 mm, 51 mm long
red 12 V=
blue
Price: 13.40
M138 LED-Signal lamp, yellow 12 V=

Signal lamp equipped with 39 yellow LEDs. Potted electronics for rough use in industry, machine halls or for the discotheque at home, medical practice etc. Fastening: surface with 2 screw loops. Operating voltage: 12 V=, < 150 mA, when using the enclosed protective resistor also for 24 V=. Dimensions: approx. 51 mm, 51 mm long
red 12 V=
blue
Price: 13.40
M139 Solar cell

Nominal power: approx. 0,5 V 800 mA. Peak power: approx. 0,6 V (open-circuit voltage) > 2 amperes (max. short circuit current on illumination with a halogen lamp). High-quality crystalline solar cell, enclosed in a case which can be stringed. Several cells can be interconnected to solar collectors with higher electric tension. Dimensions: approx. 75 x 75 mm (with fixing straps)
Example of connection you can build: The shown accessories are not included!
Available accessory: Solar motor no. P046 (0,5...2 V). Dimensions: approx. 16 x 30 mm. Already rotates with 1 solar cell only! P046 - see page 57.
Price: 3.90
56/GB
Kemo Electronic
P046 Solar motor for M139 Solar cell
Available accessories for M139: Solar motor no. P046 (0,5...2 V). Already rotates with 1 solar cell only! Dimensions: approx. 16 x 30 mm, without axle
Kemo Modules
Price: 2.10
P055 Electric motor

Operating voltage: 0,5...15 V. Dimensions: approx. 37 x 20 mm, without axle
Price: 2.10
M141 Melody generator 5 W

After pressing the key, this melody generator plays one of 6 different melodies in succession. Playing time: about 10...15 seconds each time. Operating voltage: 9...18 V=. Loudspeaker connection: 4...8 Ohm. Application: break signal, doorbell, alarm signal, etc. Max. output approx. 5 W. Dimensions: approx. 60 x 45 x 20 mm
Price: 13.40
M142 LED-Constant current 4...30 V=

This LED with soldered constant current electronics may be connected at any voltage between 4.30 V=. The LED always shines with almost constant brightness and has a current consumption of approx. 15 mA. An additional protective resistor is not required. The supplied LED can be exchanged for any other LED. It is also possible to connect several LEDs in series. Dimensions of the board: approx. 10 x 13 mm 4...30 V=
red
+ -
Price: 2.10
tuning coil
M143 FM Test transmitter

Mini-transmitting component adjustable to a frequency between 88...108 MHz. Operating voltage: 9 V battery. The microphone is built-in. Important information: Any possession of this transmitter is prohibited and punishable within the member states of the European Union as well in the area of the states to the agreement on the European Economic Zone as well as in many other countries, too. The transmitter may only be sold for export to countries or areas where this transmitter is not prohibited. (Perhaps on vessels in international waters, exotic vacation spots, USA). Dimensions: approx. 30 x 17 x 12 mm
Microphone
M143
Antenna
M144 Impulse switch-lock control

for locks, doors and central lockings in motor vehicles
A small magnet has to fixed at the lock mechanism or door. If the magnet approaches the sensing device (reed contact) of the acknowledgement transmitter, a relay picks up once for a moment (pulse duration approx. 0,5...1,5 sec.). By means of the relay point it is then possible to switch on the horn, flasher lamps or the like for a while. Operating voltage: 12 V= (11 V...15 V), current consumption < 9 mA. Relay point: 1 x ON, max. 25 V 3 A. Dimensions: approx. 71 x 45 x 22 mm
Price: 13.40
57/GB
Kemo Electronic
M148A Battery guard 12 V=
Kemo Modules
Load
This accumulator saver protects your car battery from total discharge by switching off consumers such as ice boxes, heaters, radios + television sets, etc. in time. It switches on again automatically after return of the normal voltage. The interrupting voltage is adjustable: approx. 10.413.3 V, max. 20 A. Technical data: Operating voltage: 12 V accumulator Max. switching capacity: 20 A (10 A without cooling, 20 A with additional cooling) Interrupting voltage: adjustable approx. 10.4.13.3 V Resetting voltage: approx. 0.8 V ( 0.3 V) higher than the adjusted interrupting voltage Cutoff element: power MOS transistor in the negative line Own current consumption: < 0.7 mA in OFF condition, < 1.6 mA in ON condition (LED lights) Dimensions: approx. 87 x 60 x 32 mm (with mounting bottom)
Adjust
Price: 15.00
M149 Solar charging controller 12 V= 6 A

This solar charging controller is connected between a solar cell 12 V= (open circuit voltage 1422 V=) and an accumulator 12 V= to prevent an overcharge of the accumulator. LED displays for "accu full" (approx. 14,4 V=) and "charging". Own power consumption < 2,5 mA. Technical data: Input voltage: solar cell panels: 1422 V= open circuit voltage, nominal voltage: 12 V= Max. input current: 6 A, short-time till 5 min: 10 A Inrush voltage: battery voltage < approx. 13,4 V Interrupting voltage: battery voltage > approx. 14,4 V Displays: 1 LED for Charging, 1 LED for Accu full Own power consumption: < 2,5 mA (LED switched on) Dimensions: approx. 72 x 50 x 42 mm (without fixing straps)
Fuse 10 A
Input (Solarcell) Accu 12 V Example of connection: The shown accessories are not included!
Price: 13.40
M150 DC and pulse converter

By connecting this module in series, it is possible to control our dimmer modules (230 V~ or 110 V~) M012, M028, M028N (from microcomputers or PCs) with a DC voltage or a pulse width modulation. This module is connected at the spot of the potentiometer. Galvanic separation of the control circuit via optocouplers. Control may be done optionally (at 230 V~): DC 1...5 V, DC 3...12 V, DC 6...24 V. Or TTL rectangular pulses 5 V= 1...10 kHz pulse width 10...90 % PWM (Puls width modulation). Regulation is done by changing the pulse width. Technical data: Operating voltage: 110 V~ or 230 V~ (is led to the dimmer module via the connections) Output: The module delivers a control voltage for the potentiometer input of the dimmer modules M012, M028 or M028N Input: The module M150 may either be controlled with control DC voltages of 1...5 V= or 3...12 V= or 6...24 V=. Or with TTL pulses with a pulse width modulation. Frequency between 1...10 kHz, impulse voltage approx. 5 V=, pulse width 10...90 % PWM. The power is adjusted with the pulse width 10...90 %. Input resistances: control input 1...5 V= > 1,4 k, control input 3...12 V= > 4,1 k, control input 6...24 V= > 9,1 k TTL pulse input: > 1,1 k Galvanic separation: via an optocoupler between the control inputs and the signal output towards the dimmer module Dimensions: approx. 70 x 60 x 23 mm
Example of connection: The shown accessories are not included! Load
230 V~ or 110 V~
Price: 16.30
Output power of the dimmer module on gradual shutoff with:
Sample TTL-Impulse
1 V= 3 V= 5 V=
3 V= 8 V= 12 V=
6 V= 16 V= 24 V=
10 % TTL PWM 50 % TTL PWM 90 % TTL PWM
power: "0" power: approx. 50 % power: approx. 100 %
M152 Rain sensor 12 V=

If the sensor plate gets into contact with rain or slushy snow / hail, it switches on a relay. Sun blinds may be retracted with that, skylights may be closed or a simple rain alarm can be given. The automatically heated surface of the sensor prevents any freezing or wetting of the sensor surface. 2 installed LEDs indicate the function. Operating voltage: 12 V=, current consumption: 8/120 mA (without / with heating). Relay contact: 1 x ON, max. 25 V 2 A. Waterproof-encapsulated electronics. Technical data: screening Operating voltage: 12 V= Current consumption without / with heating: approx. 8 / 120 mA Relay contact: 1 x ON, maximum load 25 V 2 A Sensor heating: automatically in case of contact with rain Light-emitting diode 1: indication that the rain sensor works Light-emitting diode 2: indication that rain is reported and the relay has switched on Duty cycle of the relay: as long as the sensor is wet brown The module is encapsulated waterproof. Active sensor surface, gold-plated: approx. 29 x 30 mm Overall dimensions: approx. 64 x 44 x 36 mm green 12 V= stabilized
wh ite
LED 2 LED 1 relay contact 12 V=
Price: 27.50
Example of the connection of an incandescent lamp 12 V that lights up when it is raining
58/GB
Kemo Electronic
M155 Discharger for 7,2 V - racing packs
...discharges partially charged 7,2 V racing packs to prevent a memory effect and thus to increase the accumulator's life. The accumulator is discharged to approx. 5,4 V (display through control LED) through a special protective circuit. Technical data: Connection voltage: 7.2 Volt (6 NiCd or NiMH cells) Discharge current: max. 0.45 ampere ( 20 %) Final discharge voltage: approx. 5.4 volts (0.9 volt per cell) Indicator: by LED Socket type: TAM socket type "A" Dimensions (W x D x H): approx. 59 x 44 x 24 mm (without fixing straps)
Kemo Modules
Price: 7.80
Operation with sensor contact
cooling angle
M156 Sensor dimmer 230 V ~, 1 kW

Dimmer for incandescent lamps and motors to be operated via push button or sensor contact. When pressing the key button, the power raises and decreases again automatically and keeps this setting if the key button is detached. If the key button is touched shortly in the desired setting, the dimmer switches off and Load (lamp, motor) upon touching it once again in the last dimmer setting it switches on again. Also to be employed as light max. 6 A dimmer in the clock frequency of 59 seconds per rise and decline. Technical data: Operating voltage: 220...240 V~, 50...60 Hz Loading capacity: max. 6 A Loads to be connected: incandescent lamps, electric motors and other inductive loads which may be regulated through phase control with a nominal voltage of 220...240 V~ 230 V~ Operation: via a push button or a sensor contact using the finger (not enclosed) Threshold frequency: approx. 5...9 seconds for adjusting 1 x upward and downward again Dimensions: approx. 80 x 56 x 23 mm (without lateral fastening straps) Time-lag 6 A fuse
Sensor contact (screw)
Shielding for cable lengths of > 10 cm
Price: 21.80
Operating voltage for the horn max. 25 V, 3 A
M158 Water switch 9...12 V=

If the 2 sensor connections of the module come into contact with water, the built-in relay switches on. Sirens, other cutoff relays, etc. may be triggered with that. Operating voltage: 9...12 V=. Relay contact 1 x ON max. 3 A / 25 V. 2 LED displays: "POWER" and "ON". Technical data: Operating voltage: 9 V DC voltage are ideal (max. 12 V), (please do only employ a stabilised power supply) Current consumption: "Ready": < 10 mA. In case of contact with water when the relay picks up: < 90 mA each with 9 V LED displays: 1 LED for the indication of readiness POWER, 1 LED for the indication ON, if the relay 9 V= switches on Connections: via free cables Dimensions: sealing case approx. 59 x 44 x 20 mm (without fastening straps) Approved cable length towards the water sensors: max. 5 m with normal cable, max. 100 m with shielded cable, if the shielding braid is connected with the negative pole of the distribution voltage.
+ Plastic plate water
horn 2 galvanized screws
Price: 10.80
M160 Phase section regulator 110...240 V~ short circuit-proof

Output regulator for halogen transformers (normal and electronic transformers), incandescent lamps and resistive loads (e.g. heating elements). Power rating approx. 1.3 A (that are about 300 W at 230 V~ and about 140 W at 110 V~). This output regulator has a soft start (increases the lifetime of lamps) and is short circuit-proof. Technical data: Operating voltage: 110...240 V~, 50...60 Hz Max. current: approx. 1.3 A Connectable loads: halogen transformers, electronic or with standard transformer 50...60 Hz, incandescent lamps 110240 V~ (same voltage as the operating voltage of the dimmer) and other resistive loads such as heatings, simple unregulated soldering irons, etc. The module is not suitable for motors and other consumers with built-in regulating electronics. Control range: approx. 095 % Powering up: soft start (this increases the lifetime of incandescent lamps considerably) Short circuit protection: the device switches off in case of a short circuit or a too high load and has to be switched on again (turn off the operating voltage and switch it on again) Dimensions: approx. 59 x 45 x 20 mm (without fastening straps)
Price: 25.80
59/GB
Kemo Electronic
M161 Ultrasonic power cannon
High-power ultrasonic pulse generator with loudspeaker
Kemo Modules
...to chase away wild animals such as martens, wild boars, deers etc from gardens, farmlands etc. The loudspeaker emits pulsed ultrasonic sounds (max. 120 dB 15 %), which have an acoustic range of up to 300 m with a tube placed upon (not included). Technical data: Operating voltage: 12...14.4 V Power consumption: max. 150 mA Frequency: approx. 22 kHz (not audible to men) Frequency curve: sine Pulse width: approx. 0.5 sec. Pulse sequence: approx. 5 sec. Indication: LED that flashes at impulses when the loadspeaker is connected Loudspeaker output: for piezo-loudspeakers. Max. 2 each of the enclosed type L010 may be operated in parallel (1 loudspeaker is attached). Dimensions of the module: approx. 60 x 46 x 20 mm (without fastening straps) Data of the attached loudspeaker: Type: L010 Diameter: approx. 41 mm Height: approx. 12 mm Frequency range: approx. 2...60 kHz Max. sound pressure: max. approx. 120 dB ( 15 %) Type: piezo
12 V=
Loudspeaker L010
Price: 21.60
M167 Level indicator for water tanks (Remote sensing up to 100 m)

Battery-powered level indicator for measuring the liquid level of water tanks such as rainwater, sewage chambers or slurry tanks from a distance of up to 100 m. After touching the button, indication occurs via 10 LEDs in steps of 10 % each (indication 10...100 %). The device is earmarked for wall assembly (approx. 120 x 70 x 20 mm) and requires 2 batteries AA. Connection is made via terminals inside the device. A normal signal cable (telephone cable, control wire or the like) with at least 11 cores is necessary to connect your water tank with the level indicator (cable is not included). You may also employ cables with less cores, but then it will not be possible to use all indication steps (e.g. with 8 cores only 7 LED indication steps may be used, which is, however, often sufficient). Technical data: Operating voltage: 3 V (2 built-in AA batteries) Display: max. 10 LEDs and 1 LED for the battery control Measuring points in the water tank: 1...10, switchable Current consumption during the measurement (button is pushed): max. 50 mA if all LEDs light up Max. cable length between the level indicator and water tank: 100 m Required cable to the water tank: telephone cable or similar cable with at least 11 cores Measuring current at the water tank probe: 50 A per channel Dimensions: approx. 120 x 70 x 20 mm (without wall angle brackets)
M167
Price: 27.50
M168 Overvoltage protection 12 V

Voltage spike suppressor for motor vehicles suppresses constantly all voltage spikes in the supply system of motor vehicles! Prevents damage to the sensitive supply system electronics through voltage spikes in the supply system. Technical data: Field of application: 12 V supply system of motor vehicles Max. energy rating: i max 8/20 s 2000 A Dimensions: approx. 30 x 25 x 15 mm (without fixing straps)
Price: 7.80
heat detector (NTC)
M169 Temperature switch-thermostat 12 V=

Adjustable electronic temperature switch. The sensor ( 5mm) may be connected with the control electronics via a cable with a length of up to 1 m. Technical data: Operating voltage: 12 V...15 V= stabilized (max. 0,1 A) Temperature range: approx. 0...100C Switching output: relay contact 1 x switch-over max. 5 A / 25 V Dimensions: approx. 60 x 45 x 25 mm (without fixing straps)
+ _
12 V...15 V
Price: 13.40
60/GB
Relay contact
Kemo Electronic
FG002N Power control (Dimmer) 230 V~
This dimmer can regulate glow lamps, heating units, universal motors (e.g. manual drilling machines) steplessly and energy saving from null up to maximal. Constant power: maximal 800 Watt, temporary peak load: approx. 1600 Watt. Technical data: Operating voltage: 180...240 V ~ Continuous load capacity: max. 800 W Short load capacity (max. 3 sec): 1600 W Dimensions: approx. 110 x 63 x 68 mm (without connector)
Devices
Price: 43,20
FG008N Flasher, slow 230 V~, max. 300 W

Flasher with adjustable flash period: approx. 0.6...9 seconds turn-on time. Turn-off time approx. 50 % of the turn-on time, respectively. Built-in fuse: T 1.6 A. For electric light bulbs 25...300 watt, 230 V~. Use: billboards, model lighthouse etc. Technical data: Operating voltage: 230 V~ Flash period: approx. 0.6...9 sec., adjustable Dimensions: approx. 110 x 65 x 62 mm
Price: 18.90
FG009 Twin flasher lamp 230 V~

This flasher lamp makes 2 incandescant lamps or light chains flashing alternately. Practical connector shell with 2 integrated euro-sockets. Technical data: Operating voltage: 230 V~ Load: max. 150 W per channel Clock speed: adjustable Dimensions: approx. 100 x 75 x 68 mm
Price: 18.90
FG010 3-Channel running light 230 V~

This running light has 3 sockets where incandescent lamps, lamp groups or light chains of 230 V~ may be connected. Only incandescent lamps may be connected, no fluorescent lamps, quartz lamps, power saving lamps nor halogen bulbs with a superposed transformer! You may only connect lamps up to a maximum of 300 W total power to each socket. Technical data: Operating voltage: 230 V~ Channels: 3 Load: max. 300 W per channel Running speed: adjustable Dimensions: approx. 100 x 65 x 75 mm
Price: 21.60
FG011 Alarm flasher 230 V~

When this unit will be plugged into the socket, the integrated light-emitting diode starts to twinkle. Burglars, who can see this unit twinkle through the window, can suspect an active alarm system. Dimensions: approx. 104 x 87 x 47 mm
Price: 8.10
61/GB
Kemo Electronic
FG014 Marten repellent tester
Testing instrument to prove existing ultrasonic sounds (1529 kHz) and high voltage (150...700 V=) at the contact plates. Thus the function of ultrasonic and / or contact plate marten repellents may be tested. Technical data: Operating voltage: 9 V battery Current consumption operation: 10...15 mA Battery check: automatically, if the instrument is switched on Frequency range: reacts to ultrasonic sounds in the range of 15...29 kHz (- 20 dB) Sensitivity: at 23 kHz approx. 40 dB Series resistor high voltage-tracer pin: 36 M Ohm Dimensions: approx. 100 x 60 x 25 mm
Devices
Price: 32.90
FG015 High power ultrasonic generator

...to drive away wild animals such as martens, rodents (e.g. out of carports, lofts, camper vans), wild boars, deer, etc. (from gardens, farmland, etc.). The device produces an enormously loud, pulsating and aggressive ultrasonic sound of about 21 kHz which is not audible to most people, but represents a considerable annoyance for wild animals which, therefore, try to avoid it. In some cases (not always!) it is also possible to drive away dogs and cats that are used to human community. The device is operated with 4 batteries R14 (UM2) which last up to 8 months depending on the quality. Technical data: Fastening: at walls or ceilings with 4 screws 3 mm (not attached) Batteries: operation with 4 batteries UM2 (R14, round cell), not included Equipment-on indication: via a built-in LED which lights up during radiation of ultrasonic sounds Assembly: suitable for outside assembly but only at spots that are protected against splash water (under the canopy, installed into aviaries in the garden, under a parking caravan, etc.) Ultrasonic frequency: approx. 21 kHz ( 10 %) Mark space ratio: approx. 0,6 sec. ON, approx. 6 sec. rest Sound pressure: > 100 dB ( 15 %) Angle of radiation: > 120 degrees Loudspeaker: special piezoelectric ultrasonic high-power loudspeaker with lacquered (humidity-proof) membrane Acoustic range: > 200 m Operating voltage: 6 V (4 x batteries UM2) Current consumption: rest: approx. 0,000005 A, active time: approx. 0,005 A Tested temperature range: - 15 C...+ 60 C Dimensions: approx. 190 x 70 x 33 mm L x W x D (dimensions without fixing straps)
Price: 52.50
FG016 Exhaust control

If an exhaust hood is switched on with the window closed and a hearth is in use (oven, fireplace), it sucks toxic carbon monoxide gases from the fireplace into the room and may kill men and animals in the room. This exhaust control ensures that the exhaust hood (or other exhaust ventilators) may only be switched on if the window is in tilt position. The Fireplace Directive (M-FevVO4) prohibits the operation of a fireplace and simultaneous suction of air, unless there is a sufficient fresh air supply (e.g. window in tilt position). The magnetic sensor of the exhaust control is fitted at the window. The exhaust hood can only be switched on if this transmits the signal window open via the approx. 5 m long cable. A back suction of dangerous flue gases into the living spaces is thus prevented. The exhaust control is an adapter plug, which is simply put between the socket and the plug of the exhaust hood. Technical data: Cable length between the magnetic switch + adapter plug for the exhaust hood: approx. 5 m white Adapter plug (safety mains plug with safety socket) white, dimensions approx. 112 x 67 x 63 mm (measured without safety plug) Switching capacity (consumer maximally suitable for connection) 230 V~ 1600 W Fuse in the device: 8...10 A 5 x 20 mm Magnetic switch white: dimensions: approx. 54 x 11 x 10 mm (is fixed at the window frame) Magnet case white: dimensions: approx. 54 x 11 x 10 mm (is fixed at the casement)
Price: 32.90
62/GB
Kemo Electronic
L001 Piezo-spherical cap-tweeter with flare
High-quality piezo-spherical cap-tweeter with flare approx. 65 x 145 mm, approx. 40 mm deep. Frequency range: approx. 2.500...45.000 Hz. This tweeter can be connected directly at the amplifier or at a diplexer. This tweeter has a vaulted aluminium spherical cap and no conical membrane (as usual with flare loudspeakers). Due to the aluminium spherical cap the acoustic pressure is not so strong as with comparable other piezo-tweeters. In return the loudspeaker has a very broad angle of radiation and a very good brilliant sound. Due to the aluminium spherical cap with its special radius of gyration and very low mobile mass the frequency response is very clean up to 45.000 Hz. Therefore this tweeter is especially suitable as ultrasonic loudspeaker for the control of parasites (against rodents, vermins etc.). Dimensions: approx. 65 x 145 mm.
Loudspeaker
Price: 5.50
L002 Ultrasonic wall loudspeaker

Additional loudspeaker (Piezo) for our ultrasonic vermin scare No. M071N. An installed light emitting diode serves as operation indication. Range of transmission: approx. 6.000...45.000 Hz. Aluminium spherical cap membrane with a very broad angle of radiation. Suitable for mounting outside provided the loudspeaker will be installed protected from rain (e.g. under the roof ledge). The LED is loaded by the supplied ultrasonic wave frequency and thus does not require any additional operating voltage. Dimensions: approx. 72 x 50 x 29 mm (without fixing straps)
LED
Price: 10.80
L003 Piezo-tweeter
Piezo-high tone loudspeaker with an installed transformer to increase the power. Concerning the technical Data this loudspeaker is indicated with a frequency response of approx. 5.000 ... 20.000 Hz, a top performance of 105 dB at a distance of 1 m. Our tests have shown that it also works very well in an ultrasonic-region of approx. 24.000 Hz. Due to the dynamic connection load 2 of these loudspeakers have to be connected in series (because of to little inner resistance 8 Ohm), and may then operate at our ultrasonic modules M048 and M071N. With this you have a very high output of radiation! Dimensions: approx. 63,5 x 63,5 mm, 50 mm deep.
Price: 3.80
L006 Small loudspeaker

Small loudspeaker 8 Ohm, 0,25 W, 45 mm, fitting for many kits!
Price: 1.60
L010 Ultrasonic piezo loudspeaker

Ultrasonic piezo loudspeaker for our Ultrasonic power cannon M161. Technical data: Rated voltage: 16 Vp-p Max. rated long power: 30 Vp-p Frequency range: approx. 2 60 kHz Sound pressure level: max. 120 dB (15%) Weight: approx. 6 g Diameter: approx. 41 mm Height: approx. 12 mm
Price: 5.50
P5123 Mini-piezoelectric-tweeter for M094

approx. 30 x 14 mm. With aluminium spherical cap for especially low distortion and constant high pitch radiation. Very suitable for ultrasonic vermin scares because these robust loudspeakers are small and can be installed in narrow angles 2.500...45.000 Hz.
Price: 3.70
63/GB
Kemo Electronic
G01B 9 V Plastic case, small
Double wall black plastic case with battery box for incorporation of a 9 V-compound battery or two 1,5 V minicells. Dimensions (L x W x H) 101 x 60 x 26 mm
Plastic cases
G007 Ribbed module case
Sealing case, black, without bottom, with fixing straps. Dimensions: approx. 67 x 65 x 37 mm
Price: 2.00
Price: 0.98
G02B 6 V Plastic case, large

Double wall black plastic case with a large battery box for incorporation of a battery support for 4 round cells. Dimensions: approx. 123 x 72 x 39 mm
G008 Case for card reader

For cards in credit card size (approx. 54 x 85 mm). There are guiding notches available for the card and for the board. Dimensions: approx. 70 x 60 x 25 mm (without flange)
Price: 2.78
Price: 3.80
G03B 9V Plastic case with battery box

Double wall black plastic case with battery box for a 9V-compound battery or a battery holder for two AAA-battery cells. With sliding lid for the battery box. Dimensions: approx. 104 x 62 x 30 mm
G009 Code lock-wall case

Stable case for wall fastening with holes to hold 12 key buttons for a code lock. Suitable key buttons are deliverable, if mini-board key buttons are used. Dimensions: approx. 130 x 80 x 50 mm
Price: 2.40
Price: 6.60
G004 Modul case

Sealing case black, without bottom. With fixings straps. Dimensions: approx. 60 x 45 x 20 mm
G010 Shell case

With ventilating slots and removable front panels. Colour: black. Dimensions: approx. 95 x 134 x 45 mm
Price: 0.74
Price: 3.30
G006 Ribbed module case

Sealing case, black, without bottom, with fixing straps. Dimensions: approx. 61 x 35 x 23 mm
G020N Case for signals

Dimensions: approx. 72 x 50 x 28 mm Screws are enclosed!
Price: 0.74
64/GB
Price: 1.10
Kemo Electronic
G021 Transparent case
Black bottom part with fixing straps and internal possibilities to fasten boards. Transparent upper part. Dimensions without fixing straps: (L x W x H) approx. 72 x 50 x 40 mm
Plastic cases
G059 Module case
Dimensions: approx. 40 x 40 x 13 mm
Price: 3.30
Price: 0.48
G022 Case with fixing straps

Inside there are 4 screw nipples to fasten one board. The case will be screwed down by using the 4 attached screws. Dimensions: approx. 72 x 50 x 63 mm (without fixing straps L x W x H)
G060 Modul case

Sealing case black, without bottom Dimensions: approx. 70 x 60 x 23 mm (without fixings straps)
Price: 3.30
Price: 0.98

Inside there are 4 screw nipples to fasten one board. The case will be screwed down by using the 4 attached screws. Dimensions: approx. 72 x 50 x 27 mm (without fixing straps L x W x H)
G061 Mini module case

With fixing straps and cover. With fastening pivot for a board. Color: black. Dimensions: approx. 30 x 25 x 15 mm (without fixing straps)
Price: 1.90

Inside there are 4 screw nipples to fasten one board. The case will be screwed down by using the 4 attached screws. Dimensions : approx. 72 x 50 x 40 mm (without fixing straps L x W x H)
Price: 0.48
G070 Module case long

Black sealing case with possibility to fasten one board. The bottom is open. With fixing straps. Dimensions: approx. 120 x 50 x 24 mm (incl. fixing straps)
Price: 1.90
Plastic case, black

With a wall thickness of 1.8 mm. Delivery with four fastening screws for the case cover. The height of covers varies according to the type of cases. Therfore, the cases are usable for general purposes. Packed in poly-bag with SBsuspension.
Price: 1.18
No. G025 G026 G027 G028 G029
Dimensions: 72x50x21mm 72x50x28xmm 72x50x35mm 72x50x42mm 72x50x63mm
Price 1.18 1.18 1.30 1.30 1.90
G080 Standard flat-case

Price: 3.30
65/GB
Kemo Electronic
G081 Standard case
Plastic cases
G086 Standard wall case middle
Price: 3.30
Price: 4.40
G082 Standard case middle

G087 Standard wall case high

Price: 3.30
Price: 4.80
G083 Standard case high

G088 Transparent wall case flat

Price: 3.90
Price: 4.40
G084 Standard wall case flat

G089 Transparent wall case standard Dimensions: approx. 120 x 70 x 30 mm
Price: 3.90
Price: 4.40
G085 Standard wall case

G090 Transparent cover-case flat

Price: 3.90
66/GB
Price: 4.20
Kemo Electronic
G091 Transparent cover-case
Plastic cases
G104 Small console case
Dimensions: approx. 95 x 90 x 40 mm Color: grey
Price: 4.40
Price: 3.70
G100 Display case

Dimensions: approx. 130 x 130 x 17 mm (L x B x D). With holes for wall fastening and wraparound edge for optional assembly of pictures. With transparent front panel. For installation of presentation electronics with illuminants (LEDs, neon lamps, etc.)
G108 Shell case

Dimensions: approx. 210 x 160 x 66 mm Color: grey
Price: 4.40
Price: 13.40
G062 Working bowl

Made of plastic. Dimensions: approx. 205 x 130 x 35 mm
G109 Shell case with loudspeaker grid

Colour: grey Dimensions: approx. 260 x 195 x 90 mm
Price: 1.40
Price: 18.90
Case with front panels

No.: Dimensions approx. :
Colour: grey
Case with front panels

No.: Dimensions approx. : 90 x 50 x 17 mm 90 x 50 x 25 mm 90 x 50 x 33 mm
Colour: grey
Price: 3.70 3.70 4.40 4.40 4.90 5.50
Price: G110 8.10 6.60 G111 G112
G105 150 x 80 x 58 mm G107 150 x 80 x 30 mm
G113 120 x 60 x 30 mm G114 120 x 60 x 40 mm G117 120 x 60 x 50 mm
67/GB
Kemo Electronic
G123 Computer module case
With 25-pole SUB-D-plug and 25-pole SUB-D-jack. For installation of adapters and appliances which shall be operated at the parallel port of the computer. Dimensions: approx. 73 x 56 x 30 mm
Lighting console + connector cases

STG15 Connector case with socket
Case with injection-moulded shock-proof plug and injection-moulded shock-proof socket (each with grounding bow). Colour: black. Dimensions: approx. 110 x 65 x 62 mm
Price: 5.80
Price: 5.80
G200 Lighting console-case

Solid stable construction, colour: black. Dimensions: approx. 284 x 160 x 76 mm
STG20 Connector case, large

Large connector shell with mains plug. Colour: black. Dimensions: approx. 105 x 77 x 47 mm
Price: 16.30
Price: 2.00
G201 Lighting console-case with transparent front panel

As G200, however, with transparent front panel. Colour: black. Dimensions: approx. 284 x 160 x 76 mm
K001 Plug-in axle with button

Plug-in axle with injection-moulded button approx. 15 x 8 mm. Total length together with button: approx. 46 mm
Price: 16.30 Accessories and possibility of application for our connector shell STG20
Price: 0.50
ST04 Euro-socket
Insert-socket for 230 V~ mains plug. Delivery is effected disassembled in SB-bag. Color: black
case
socket
Price: 1.10
plug-in axle
board
Sectional drawing
68/GB
Kemo Electronic
E001 Platine FR3 approx. 160 x 100 x 1 mm
One-side copper layer approx. 35 m. Special offer for "do-it-yourself-designers" of boards (FR3). 1 pack = 20 pc / price = 1 pc
Boards+Accessories
Price: 1.10
E002 Experimental board - dot grid

One-side copper layer approx. 35 m, gold plated (better for soldering "lead-free"). Material FR2, approx. 1,5 mm thick, hole distance approx. 2,54 mm, diameter of holes approx. 1 mm. Dimensions: approx. 100 x 160 mm.
Price: 1.60
E004 Experimental board - dot grid

One-side copper layer approx. 35 m, gold plated (better for soldering "lead-free"). Material FR4 Epoxid, approx. 1,5 mm thick, hole distance approx. 2,54 mm, diameter of holes approx. 1 mm. Dimensions: approx. 100 x 160 mm.
Price: 3.30
E012 Experimental board - strip grid

One-side copper layer approx. 35 m, gold-plated (better for soldering "lead-free"). Material FR2, approx. 1,5 mm thick, hole distance approx. 2,54 mm, diameter of holes approx. 1 mm. Dimensions: approx. 100 x 100 mm.
Price: 1.30

One-side copper layer approx. 35 m, gold-plated (better for soldering "lead-free"). Material FR2, approx. 1,5 mm thick, hole distance approx. 2,54 mm, diameter of holes approx. 1 mm. Dimensions: approx. 100 x 160 mm.
Price: 1.60

One-side copper layer approx. 35 m, gold-plated (better for soldering "lead-free"). Material FR4 Epoxid, approx. 1,5 mm thick, hole distance approx. 2,54 mm, diameter of holes approx. 1 mm. Dimensions: approx. 100 x 160 mm.
Price: 3.30
E011 Experimental board with strip raster

One-side copper layer approx. 35 m, copper layer gold-plated (better for soldering "lead-free"). Material FR2, approx. 1,5 mm thick, hole distance approx. 2,54 mm, diameter of holes approx. 1 mm. Dimensions: approx. 100 x 500 mm.
Price: 6.60
E013 Experimental board with 3 strip raster

The strip raster is interrupted every 3rd hole. One-side copper layer approx. 35 m, gold-plated (better for soldering "lead-free"). Material FR2, approx. 1,5 mm thick, holde distance approx. 2,54 mm, diameter of holes approx. 1 mm. Dimensions: approx. 100 x 160 mm.
Price: 1.80
E010 Experimental board - punched raster F001 Photopositive-coated board

Raster: approx. 2,54 mm, without copper layer, approx. 1,5 mm thick. Material FR2, diameter of holes approx. 1 mm. Dimensions: approx. 100 x 160 mm. One-side copper layer, approx. 35m. Material FR2. Dimensions: approx. 100 x 160 mm.
Price: 1.40
Price: 3.40
69/GB
Kemo Electronic
E100 Developer
For development of photopositive coated boards. Double welded in 2 polybags with SBsuspension.
Diverse
K002 Reflector mirror
For infrared light barriers. Dimensions: approx. 51 x 69 mm, 8 mm thick.
Price: 0.98
Price: 3.30
L100 Conductive silver

Silver-conductive lacquer with excellent adhesive power. Ideal for repairing boards, window alarm loops and window heatings. Very conductive: approx. 0,02 Ohm - 0,1 Ohm/cm. Based on the new regulations, we supply this lacquer jointly with the package insert "DIN-Safety Data Sheet" in glass bottles and SB-packing. (Contents of bottle approx. 3 g)
K062-4 Turning knob with grub screw for 4 mm axle

Knob body, black, with grey cap. Knob approx. 22 mm x 14,5 mm. Stable fastening with set screw M3 and nut.
Price: 4.90
Price: 0.58
W001 Plastic forceps

Length approx. 125 mm. Internal geared point with an especially broad and flexible clamping surface. Ideal for works at alive parts or for handling caustic baths.
K062-6 Turning knob with grub screw for 6 mm axle

Knob body, black, with grey cap. Knob approx. 22 mm x 14,5 mm. Stable fastening with set screw M3 and nut.
Price: 0.48
Price: 0.58
100 Corrosive
White corrosive: approx. 100 g (sodium persulphate) for engraving of boards. Sufficient for 0,5 l water.
200 Corrosive set, complete

3-copper-clad + 1 photo-coated board, 1 developer, 1 corrosive, 1 forceps, 1 working bowl, 1 comprehensive, illustrated instruction. Packed in stable polybags with SB-suspension.
Price: 1.98
G062 Working bowl

Made of plastic. Dimensions: approx. 205 x 130 x 35 mm
Price: 1.40
70/GB
Price: 11.20
Kemo Electronic
A001 Bending device
For resistors, diodes, chokes, capacitors and electrolytic capacitors. Earmarked for five grid sizes: 7,5 / 10 / 12,5 / 15 / 17,5 mm.
Diverse
W100 Resistance timer / colour code
This resistance timer is readable from both sides and substitutes the old colour code timers with 3 wheels. Steady wipeable performance! Front: For the series E6, E12, E24. Back: For the series E48 and E96.
Price: 0.78
Alarm contact construction

The contact is closed (NC) when the magnet is connected. The alarm contact is potted humidity-proof. The electrical connection is not done via interferenceprone threaded terminal ends at the alarm contact, but via cables which have to be soldered on (like prescribed by the VDS-regulations of the insurers a.o.). 1 Set consists of 1 magnet and 1 potted alarm contact with pigtails. Available in brown or white. Dimensions: approx. 43 x 10 x 11 mm. Rupturing capacity max. 0,3 A / 40 V.
Price: 1.10
G030 Case feet, black, small

For screwing down, made of soft-plastic.
A002
brown
Price: 3.80
A004
white
Price: 3.80
Price: 0.17
A003 Alarm contact for embedding

The contact is closed (NC) when the magnet is connected. The alarm contact is potted humidity-proof. This alarm contact is embedded into the door folding or window rabbet. Boring: approx. 9,2 x 22 mm. Colour: brown.
G040 Case feet, black, medium

Price: 0.17
G050 Case feet, black, large

Price: 3.80
71/GB
Price: 0.17
Kemo Electronic
S001 Resistors
approx. 200 pieces
Assortments
approx. 100 pieces
S011 Diodes with data sheet
S028 Cable ties 1 set
Price: 1.78 S003 Trimming potentiometers

approx. 50 pieces
Price: 3.30 S012 Integrated circuits + data

approx. 20 pieces
Price: 3.30 S004 Potentiometers etc.

approx. 20 pieces
Price: 3.30 S013 Insulating plastic tube
Price: 1.10 S030 Board flat plugs

approx. 100 pieces
Price: 4.40 S005 Elektrolytic capacitors

approx. 50 pieces
Price: 1.90 S017 Screws + accessories S032 Lug
Price: 1.10
approx. 30 pieces for S030 board flat plugs
Price: 2.00 S007 Ceramic capacitors

approx. 100 pieces
Price: 1.18 S023 Coils, chokes

approx. 50 pieces
Price: 1.10
S023
Price: 2.00 S009 Switches + key buttons

approx. 20 pieces
Price: 3.30
S012
Price: 3.30
S023
S005
72/GB
Kemo Electronic
S035 Trimming capacitors, ceramic, approx. 20 pieces S046 Transistors TO3/TO92 data
approx. 20 pieces
Assortments
S054 Relays
approx. 5 pieces
Price: 1.60 S036 Light emitting diodes

approx. 30 pieces
Price: 2.00 S049 Soldering terminals, assorted, approx. 50 pieces
Price: 2.40 S056 Compression + tension springs

approx. 30 pieces
Price: 1.60 S038 Connectors

approx. 100 pieces
Price: 1.00 S050 LEDs red-green-yellow 5 mm, approx. 18 pieces S057 IC-socket
Price: 1.00
approx. 30 pieces
Price: 3.30 S039 Computer connectors

approx. 25 pieces
Price: 1.60 S051 Fuses, approx. 30 pieces
Price: 1.60 S058 Heat shrink tubes

approx. 15 pieces
Price: 4.40 S040 Tantalum elcas, bead + AX

approx. 100 pieces
Price: 1.60 S052 Foil capacitors

approx. 100 pieces
Price: 2.20 S062 LED 5 mm red

approx. 10 pieces
Price: 4.40 S043 Numeric display LED + LCD

approx. 10 pieces
Price: 4.00 S053 Power resistors 1...7 W

approx. 50 pieces
Price: 0.70
Price: 3.30
Price: 2.00
S046
S035
S043
73/GB
Kemo Electronic
S063 LED 5 mm green
approx. 10 pieces
Assortments
S079 Line-up LED red
approx. 10 pieces 5 mm approx. 50 pieces
S070 LED 5 mm yellow
Price: 1.00 S064 LED 5 mm yellow

approx. 10 pieces

approx. 50 pieces
Price: 0.74 S080 Line-up yellow

approx. 10 pieces 5 mm

approx. 10 pieces
Price: 3.30 S072 LED 3 mm green

approx. 50 pieces
Price: 0.74 S081 InfraredLED 5 mm

approx. 10 pieces

approx. 10 pieces

approx. 50 pieces
Price: 1.00 S085 LED-socket 5 mm

approx. 10 pieces

approx. 10 pieces
Price: 3.30 S074 Blink-light 5 mm red

approx. 5 pieces

approx. 5 pieces

approx. 50 pieces
Price: 1.60 S076 DUO-LED 5 mm red/green

approx. 10 pieces

approx. 5 pieces

approx. 50 pieces
Price: 1.60 S078 Line-up LED green

approx. 10 pieces 5 mm
Price: 1.10 S092 LED 10 mm clear-red

approx. 5 pieces
Price: 3.30
Price: 0.74
74/GB
Price: 1.10
Kemo Electronic
S093 LED-creative-set
Approx. 50 light-emitting diodes and 20 resistors. For operation of the lightemitting diodes at 6 V= or 12 V=. With detailed description and connecting diagrams.
6 LEDs on 12 V= R2 + 12 V=
Assortments, high frequency litz wire + ferrite antenna S097 LED 3 mm orange
approx. 10 pieces
S095N LED 8 x 8 mm tinted-yellow

approx. 5 pieces
Price: 1.10
Price: 0.74
R2
1 LED on 12 V= R1 R3 + 12 V=
S096N LED 8 x 8 mm tinted-green

approx. 5 pieces
Price: 1.10
Price: 4.40
Article-No. Article
HF001 S044 S045 High frequency litz Standard wire, insulated Jumper wire, insulated Flat rod Ferrite antenna Ferrite antenna
Roll-Length/Dimensions
approx. 10 m approx. 2 x 10 m approx. 2 x 10 m
Price
1.60 1.60 1.60
FE003 FE004 FE005
approx. 13 x 5 x 55 mm approx. 10 x 60 mm approx. 8 x 5 x 80 mm
1.10 1.10 1.10
75/GB
Kemo Electronic
Article-No.
KL001 KL002 KL003 KL004 KL005 KL006 KL007 KL008 KL010 KL012 KL015
Enamelled copper wire, silver copper wire, resistance wire, packed in small polybags (SB-suspension)
Article
Enamelled copper wire
Diameter approx.
140 m 115 m 55 m 23 m 23 m 16 m 12 m 10 m 6m 6m 4m
Roll-Length
0,1 mm 0,2 mm 0,3 mm 0,4 mm 0,5 mm 0,6 mm 0,7 mm 0,8 mm 1,0 mm 1,2 mm 1,5 mm
Price
2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00
KS006 KS008 KS012 KS015 KS020
Silver-plated copper wire
10 m 7m 3m 2m 0,8 m
0,6 mm 0,8 mm 1,2 mm 1,5 mm 2,0 mm
2.00 2.00 2.00 2.00 2.00
W030 W044 W060 W062
Resistance wire
5m 5m 5m 5m
30 Ohm/m 44 Ohm/m 60 Ohm/m 62 Ohm/m
2.00 2.00 2.00 2.00
76/GB
Kemo Electronic
M148A M083 M102N M057 B136 B232Z A003 A002 A004 B198 FG011 M117 M061 B003 M079 M080 B182 B125 B115 B199 M034 M040 M055 M032 M031N M032S M033 B199 B099 M100N B189 B092 B108 M019
Index A-Z
page 58 46 48 42 18 31 71 71 71 24 61 53 42 2 45 45 21 16 15 24 39 40 41 38 38 39 39 24 12 47 22 11 14 37 FG002N M063 M156 M043 M155 P055 B136 M068 B093 M067 B155 B152 B231 M126N B146 M131N M069 B239 B007 ST04 FG016 E004 E002 E010 E003 E005 E012 E013 E011 B204 M080 M008 M077 B185 M079 B003 M082 B186 FG008N M114N B060 B018 B100 B156 M143 B015 Dimmer (power control) 230V~ Dimmer, 12V~, 50W (or 24...48V~) Dimmer, Sensor-, 230V~, 1kW Discharge protection module, solar Discharger for 7,2V, racing packs 61 43 59 40 59 57 18 44 11 43 19 19 30 55 18 55 44 32 2 68 62 69 69 69 69 69 69 69 69 26 45 35 45 21 45 2 46 21 61 52 7 3 13 19 57 3
A
Accu saver, Battery guard 12V= Accu-charging regulator, 12V= Accumulator charger, second, 6...24V= Accumulator charging module Acupuncture, electronic, 3...6V= Additional light barrier for infrared stopwatch Alarm Ccontact for embeddnig, brown Alarm contact construction, brown Alarm contact construction, white Alarm display Alarm flasher 230V~ Alarm module for computers Alarm monitor Alternating flasher for 2 small lamps 6...16V=, max. 300mA Alternating flasher/flasher for 1 to 10 LED's at max,6...12V= Alternating flasher/flasher for small glow lamps 6...12V= Amplifier, 1W Amplifier, 200W Amplifier, 8W Amplifier, antenna-, approx. 50...1000MHz Amplifier, power, 40W Amplifier, pre-, universal-, 9...24V= Amplifier, Stereo-, 3W Amplifier, universal- , 12W Amplifier, universal- , 3,5W Amplifier, universal-, 12W Plug & Play Amplifier, universal-, 18W Antenna amplifier, approx. 50...1000MHz Antenna amplifier, special-, 30...850MHz Anti marten device for motor vehicles, 11...15V= Anti-flea-generator Aternating flasher, LED-, 6...12V= Atomium, 9V= Automatic light switch, 230V~
E
Electric motor Electronic acupuncture, 3...6V= Electronic card switch, 9V= Electronic dice, 6V= Electronic dog barking Electronic dog barking Electronic fence appliance Electronic key Electronic key, 12V= Electronic melody "Coo Coo Waltz" Electronic spare key ring for M126N+B231 Electronic underground rodent pest repeller Electronic wheel of fortune, 9...12V= Electrostat apparatus, 9...12V= Euro-Socket Exhaust Control Experimental board - dot grid Experimental board - dot grid Experimental board - punched raster Experimental board - strip grid Experimental board - strip grid Experimental board - strip grid Experimental board with 3 strip raster Experimental board with strip raster
F
Flash-LED 230V~ Flasher / alternating flasher for small glow lamps 6...12V= Flasher 230V~ Flasher, 5...12V=, max. 1A Flasher, 6...12V=, max. 100mA Flasher, alternating- / flasher, for 1 to 10 LED's Flasher, alternating-, for 2 small lamps, 6...16V=, max. 300mA Flasher, DC-, 12...24V=, max. 8A Flasher, Jumbo LED-, 6...12V= Flasher, slow, 230V~ Flasher, slow, 230V~/110V~ Fluorescent lamp voltage transformer FM Oscillator 2W FM receiver, 9V= FM receiver, 9V=, 108...132MHz FM test transmitter, 88....108MHz Fog horn, 5W, 4.5...12V=
M148A A001
B
Battery guard, (Accu saver), 12V= Bending device
58 71
M068 G050 G040 G030 M121 M149 M083 B235 B123 B240 M104 L100 M142 B162 B119 M038N M150 M029 100 200 M046 M045 M150 M082 M107 M101A M101 B212 M115N B081 B052 M128 M085 B195 E100 B093 B063
C
Card switch, electronic, 9V= Case feet, black, large Case feet, black, medium Case feet, black, small CCD-camera-dummy Charging controller, solar- 12V= 6A Charging regulator, Accu-, 12V= Christmas tree, 9V= Combination kit: Light barrier/heat switch/twilight switch, 12V= Computer laser show Computer switch, 4-Channel Conductive silver Constant current, LED-, 4...30V= Continuity tester with piezo buzzer Converter approx. 100...200MHz Converter from 24V= > 12V= (13.8V=) Converter, DC- and pulseConverter, voltage-, in: 6...14V=, out: 11...26V= Corrosive Corrosive set, complete Cross-over network 2-ways, 4...8Ohm, max. 120W Cross-over network 3-ways, max. 120W
44 71 71 71 54 58 46 31 16 32 49 70 57 19 15 39 58 38 70 70 41 40 58 46 49 48 48 27 53 10 6 55 46 24 70 11 8
B051 M065 B123 M128 FG015 M062 B015 B188 M144 M085 B195 B216N M116 B213 B215 B062 B241 B223 M120 B232 M108 M106 B137N
G
Gas sensor Spirits tester, 12V=
6 43 16 55 62 43 3 22 57 46 24 29 53 28 28 8 33 29 54 31 50 49 18
H
Halogen music light for 12V~ lamps Heat switch-/light barrier-/twilight switch-/combination kit, 12V= HF-Detector (Mini Spy Finder) High power ultrasonic generator High-voltage generator, Mini-fence-, 9...12V= Horn, fog-, 5W Horn, mini signal-, 6...12V=
I
Impulse switch-lock control Infrared detector, 9V= Infrared detector, 9V= Infrared light barrier 5m Infrared light barrier approx. 30m Infrared light barrier max. 50m Infrared light barrier, mini-, 10cm, 6...12V= Infrared light barrier, range over 18m Infrared remote control, 10-channel Infrared spotlight, 12...14V= Infrared spotlight, 12...15V= for CCD-cameras Infrared stopwatch Interface switch, 4-fold Interface, Stepper motor 4 pin Ion generator, 12V=
D
DC and pulse converter DC-Flasher, 12...24V=, max. 8A DC-motor-interface Decalcifier with power supply, 6...15V= Decalcifier against calcification and corrosion in water pipes Decalcifier against calcification and corrosion in water pipes Defence, marten-, for motor vehicles, 12...15V= Deftness game, 9...12V= Destroyer siren Detector, HF-, (Mini Spy finder) Detector, Infrared-, 9V= Detector, infrared-, 9V= Developer Dice, electronic-, 6V= Digital number lock with keyboard, 6V=
B186
J
Jumbo LED Flasher 6...12V=
21
77/GB
Kemo Electronic
M126N
Index A-Z
page 55 36 30 30 42 31 21 25 26 47 11 57 56 56 56 16 60 23 56 16 6 31 29 53 28 8 28 35 54 37 3 9 37 63 63 26 25 P1089B P1089G P1089R B063 B037 M168 B085 B181 M160 F001 L010 L001 L003 P5123 W001 E001 K001 M015N M034 M161 FG002N M028 M028N B184 B203 M039 B102 B126 B073 M040 B133 B214
K
Key, electronic, 12V=
N
Neon lamp Blue Neon lamp Green Neon lamp Red Number lock, digital, 6V= Number lock, sensor-, 12V=
M012 L005 B224 M058N B233 B186 B202 B209 M087 B092 M142 M136 M137 M138 B124 M167 B194 M135 B123 B045 B232Z B216N M116 B213 B062 B215 M009 M124 M019 B022 B069 M016 L006 L002 B206 B200
L
Lamp and motor controller, 240V~/110V~ Laser module for B224, B240, M133 Laser show, 6V= Leakage tester, microwave-, 9V= LED emergency light 6...15V=/~ LED flasher, jumbo-, 6...12V= LED running light -10 channelsLED series printed circuit board 230V~ LED tester, 9V= battery LED-alternating flasher, 6...12V= LED-constant current, 4...30V= LED-Signal lamp red, 12V= LED-Signal lamp, green 12V= LED-Signal lamp, yellow 12V= LED-volume indicator, stereo, 2 x 11 LED's Level indicator for water tanks Light barrier Light barrier 4m, 12V= Light barrier-/heat switch-/twilight switch-/ combination kit, 12V= Light barrier, 12V= Light barrier, additional, for infrared stopwatch Light barrier, infrared-, 5m Light barrier, infrared-, approx. 30m Light barrier, infrared-, max. 50m Light barrier, infrared-, range over 18m Light barrier, mini-infrared-, 10cm Light flasher 230V~ Light sweller 12V=, max. 24W Light switch, automatic-, 230V~, 1 sec. to 15 min. Lighting console, 6-channel, 220...240V~ Listening stethoscope, 9V= Loudspeaker separating filter, 3-way, max. 120W Loudspeaker, small Loudspeaker, ultrasonic wall-, Luminous letter control Luminous letters
page 7 7 7 8 5 60 10 20 59 69 63 63 63 63 70 69 68 36 39 60 61 37 38 21 25 40 13 17 9 40 17 28
O
Overvoltage protection 12V
P
Parabolic-microphone, 9V= Paralyser 10.000V, 9V= Phase section regulator 110...240V~ Photopositive-coated board Piezo loudspeaker, ultrasonicPiezo-spherical cap-tweeter with flare Piezo-tweeter Piezo, electric-tweeter, miniPlastic forceps Platine FR3 Plug-in axle with button Potential transformer, max. 1,5A, input 6...28V=, output 3...15V= Power amplifier, 40W Power cannon, ultrasonic-, 12...14, 4V= Power control (Dimmer) 230V~ Power control 110...240V~ 2600VA Power control 110...240V~ 4000VA Power supply 0...12V=, max. 0,8A Power supply 1.2...18V= Power supply approx. 1,2...30V=, 2A Power supply, approx. 1,2...30V, max. 2A Power supply, approx. 1,2...30V=, max. 5A Preamplifier, universal-, 12...30V= Preamplifier, universal-, 9...24V= Precision timer, 12V= Proximity sensor, ultrasonic-, 9...12V=
B095 B243 M115N M100N FG014 M094 M111 B077 M103 M119 M141 B237 B055 P5341 P5342 B085 M058N B190 B188 P5113 P5339 P5337 P5110 B191 B088 M062 B215 P5123 B242 B134 B005 M012 M110 M106 M073 M007
M
Marine diesel, 12V= Marten and vermin repellent, 12...16V= Marten defence for motor vehicles, 12V= Marten device, anti-, 11...15V= Marten repellent tester Marten repeller, 12...15V= Marten shock for motor vehicles Martin siren - german police siren 12V= max. 15W Master-slave 230V~ Master-slave, 6...30V= Melody generator 5W Melody generator, 6 Melodies Metal searching device, 9V= Micro-stepper motor oval Micro-stepper motor rectangular Microphone, parabolic-, 9V= Microwave leakage tester, 9V= Mini alarm system Mini signal horn, 6...12V= Mini-stepper motor Siemens 1BC 2720-68N Mini stepper motor 42SPM-24DJA Mini stepper motor AEG S021/24 Mini stepper motor RDM37 Mini timer 9V= Mini traffic light Mini-fence-high-voltage-generator, 9...12V= Mini-infrared light barrier, 10cm Mini-piezo electric-tweeter for M094 Mole and vole repellent, solar-, Mono sound controller Mosquito banisher, flea- and tick-, 9V= Motor and lamp control, 240V~/110V~ Motor driver, stepper-, 6 pin Motor-interface, stepper-, 4 pin Motorbike alarm Music light, 3-Channel
12 33 53 47 62 47 52 9 48 53 57 32 7 51 51 10 42 22 22 51 51 51 51 23 10 43 28 63 33 18 2 36 50 49 45 35
M155 M152 B100 B156 K002 M160 B210 B197 M125 B241 B243 B242 M071N M094 W100 B107 B089 B201 M011N FG010 B097
R
Racing packs, discharger for 7,2V Rain sensor, 12V= Receiver, FM-, 9V= Receiver, FM-, 9V=, 108...132MHz Reflector mirror Regulator, phase section-, 110...240V~ Relay board, 8-channel-, 12V= Relay card, 12V= Relay module 8-channel Remote control, infrared-, 10-channel Repellent, marten and vermin-, 12V= Repellent, solar mole and vole-, Repellent, ultrasonic vermin-, 12V= Repeller, marten-, 12...15V= Resistance timer / color code Robot voice, 9...12V= Running light, 10-Channel, 230V~ + 9V= Running light 10 channels 12V= Running light, 230V~, 4-channel Running light, 3-Channel 230V~ Running light, 4-Channel, 230V~ + 12V=
59 58 13 19 70 59 27 24 54 33 33 33 44 47 71 14 11 25 35 61 12
78/GB
Kemo Electronic
M102N M156 B037 B193 B011 M152 B104 B120 B188 B187 B104 M119 B217 M139 M149 M043 B242 P046 B099 B180 B051 B223 M120 B207 P5111-15 P5111 P5108 P5113 B211 M110 M106 P5341 P5342 P5339 P5337 P5110 B122 M055 B127 B124 B069 B232 B025 M068-5
Index A-Z
page 48 59 5 23 2 58 13 15 22 22 13 53 29 56 58 40 33 57 12 20 6 29 54 26 51 51 51 51 27 50 49 51 51 51 51 51 16 41 17 16 9 31 4 44 B025 M048 FG015 L010 M161 L002 B214 M071N B101 M032S M032 M033 M031N M060 M040 B243 M071N B242 B038 M029 B065 M020 L002 M158 B192 B239
S
Second accumulator charger, 6...24V= Sensor dimmer, 230V~, 1kW Sensor number lock, 12V= Sensor switch 9V= Sensor touch switch Sensor, rain-, 12V= Ship siren, 6...12V= Ship super diesel, 6...12V= Signal horn, mini-, 6...12V= Signal-Injector (test signal generator) Siren, ship-, 6...12V= Slave, master-, 6...30V= Smoke alarm 12V= Solar cell, approx. 0,6V= Solar charging controller, 12V=, 6A Solar discharge protection module Solar mole and vole repellent Solar motor for M139 Solar cell Special antenna amplifier, 30...850MHz Speed control for mini-drilling machines, 12...24V= Spirits tester- gas sensor, 12V= Spotlight, infrared-, 12...14V= Spotlight, infrared-, 12...15V=, for CCD cameras, Steamer noise with steam whistle + steambell, 4,5... 6V= Stepper motor AEG S026/48-4 pin Stepper motor AEG S026/48-4 pin Stepper motor Berger RDM57 Stepper motor Siemens 1BC2720-68N, mini Stepper motor control, 6...12V= Stepper motor driver 6 pin Stepper motor-interface 4 pin Stepper motor, micro-, oval Stepper motor, micro-, rectangular Stepper motor, mini-, 42SPM-24DJA Stepper motor, mini-, AEG S021/24 Stepper motor, mini-, RDM37 Stereo amplifier Stereo amplifier, 3W Stereo decoder Stereo LED-volume indicator 2 x 11 LED's Stethoscope, listening-, 9V= Stopwatch, infraredStroboscope, U-, 230V~ Substitutional cards (5 pcs) for M068 electronic card switch
U
U-Stroboscope, 230V~ Ultrasonic generator, 12...15V= Ultrasonic generator, High power Ultrasonic piezo loudspeaker Ultrasonic power cannon, 12...14.4V= Ultrasonic wall loudspeaker Ultrasonic, proximity sensor, 9...12V= Ultrasonic, repellent, vermin-, 12V= Universal alarm system for car, boat, house, garden, yard Universal amplifier 12W Plug & Play Universal amplifier, 12W Universal amplifier, 18W Universal amplifier, 3,5W Universal car noise filter Universal preamplifier, 9...24V=
page 4 41 62 63 60 63 28 44 13 39 38 39 38 42 40 33 44 33 5 38 8 37 63 59 23 32
V
Vermin and marten repellent, 12V= Vermin repellent, ultrasonic-, 12V= Vole and mole repellent, solar-, Voltage converter from 12V= up to approx. 220V~ Voltage converter, in: 6...14V=, out: 11...26V= Voltage transformer, in: 6..12V=, out: 12...30V= Voltage transformer from 24V= > 13.8V=
W
Wall loudspeaker, ultrasonic Water switch, 9...12V= Water level sensor 9V= Wheel of fortune, electronic, 9...12V=
M084 M169 B048 B172 B042 M113N B191 B133 M050 TR01 M015N M020 B014 M143 E55XX TK55XX K062-4 K062-6 P5123 L001 L003 B123 M122 M013 FG009
T
Telephone voltage protection Temperature switch-thermostat 12V= Temperature switch, 12V= The little electro-technician, 4,5V= Time switch (short) approx. 2 sec. to 5 min. 12V= Time switch 12...15V=, 2 sec. to 10 (~30) min. Timer, mini-, 9V= Timer, Precision-, 12V= Transformer control, 230V~ Transformer for converter Transformer, potential-, max. 1,5A, input 6...28V=, output 3...15V= Transformer, Voltage-, from 24V= > 13,8V= for 12V= devices, max 1,1A Transmitter, 27MHz, 6W Transmitter, FM-test. 88...108MHz Transponder key - GLAS Transponder key - PLAST Turning knob with grub screw for 4 mm axle Turning knob with grub screw for 6 mm axle Tweeter for M094, mini-piezo electric Tweeter, cap-, piezo-spherical-, with flare Tweeter, piezo Twilight switch-/light barrier-/heat switch-/combination kit, 12V= Twilight switch, 12V= Twilight switch, 210...240V~ Twin flasher lamp 230V~
46 60 6 20 5 52 23 17 41 5 36 37 3 57 55 55 70 70 63 63 63 16 54 36 61
79/GB
Kemo Electronic
1. Amplifier and similar
B069 B073 B085 B099 B115 B122 B125 B134 B182 B199 M016 M031N M032 M032S M033 M034 M040 M045 M046 M055 Listening stethoscope, 9V= Preamplifier, universal-, 12...30V= Parabolic-microphone, 9V= Special antenna amplifier, 30...850MHz Amplifier, 8W Stereo amplifier Amplifier 200W Mono sound controller Amplifier, 1W Amplifier, antenna-, approx. 50...1000MHz Loudspeaker separating filter, 3-way, max. 120W Universal amplifier, 3,5W Universal amplifier, 12W Universal amplifier 12W Plug & Play Universal amplifier, 18W Power amplifier, 40W Universal preamplifier, 9...24V= Cross-over network 3-ways, max. 120W Cross-over network 2-ways, 4...8Ohm, max. 120W Stereo amplifier, 3W page 9 9 10 12 15 16 16 18 21 24 37 38 38 39 39 39 40 40 41 41
Index Product Groups

5. Receiver, transmitter and similar
B014 B018 B100 B119 B156 B241 M128 M143 Transmitter 27Mhz 6W FM Oscillator 2W FM receiver, 9V= Converter approx. 100...200MHz FM receiver, 9V=, 108...132MHz Infrared remote control, 10-channel HF-Detector (Mini Spy Finder) FM test transmitter, 88....108MHz page 3 3 13 15 19 33 55 57
6. Sirens, sound generator and similar

B005 B015 B052 B077 B095 B104 B120 B146 B155 B162 B187 B188 B189 B207 B214 B237 B242 B243 M048 M067 M069 M071N M094 M100N M141 FG015 Mosquito banisher, flea- and tick-, 9V= Fog horn, 5W, 4,5...12V= Destroyer siren Martin siren - german police siren 12V= max. 15W Marine diesel, 12V= Ship siren, 6...12V= Ship super diesel, 6...12V= Electronic melody "Coo Coo Waltz" Electronic dog barking Continuity tester with piezo buzzer Signal-Injector (test signal generator) Mini signal horn, 6...12V= Anti-flea-generator Steamer noise with steam whistle + steambell, 4,5... 6V= Proximity sensor, ultrasonic-, 9...12V= 6-Melody generator Solar mole and vole repellent Marten and vermin repellent, 12...16V= Ultrasonic generator, 12...15V= Electronic dog barking Electronic underground rodent pest repeller Vermin repellent, ultrasonic-, 12V= Marten repeller, 12...15V= Anti marten device for motor vehicles, 11...15V= Melody generator 5W Ultrasonic generator, High power 2 3 6 9 12 13 15 18 19 19 22 22 22 26 28 32 33 33 41 43 44 44 47 47 57 62
2. Power supply and similar

B102 B126 B184 B203 M039 M057 B003 B022 B025 B088 B089 B092 B097 B108 B124 B185 B186 B201 B202 B204 B209 B235 FG008N FG009 FG010 FG011 M007 M008 M009 M011N M065 M077 M079 M080 M082 M114N Power supply, approx. 1,2...30V=, max. 2A Power supply, approx. 1,2...30V=, max. 5A Power supply 0...12V=, max. 0,8A Power supply 1.2...18V= Power supply approx. 1,2...30V=, 2A Accumulator charging module Alternating flasher for 2 small lamps 6...16V=, max. 300mA Lighting console, 6-channel, 220...240V~ U-Stroboscope, 230V~ Mini traffic light 10-Channel running light 230V~ + 9V= Aternating flasher, LED-, 6...12V= 4-Channel running light 230V~ + 12V= Atomium, 9V= Stereo LED-volume indicator 2 x 11 LED's Flasher, 6...12V=, max. 100mA Jumbo LED Flasher 6...12V= Running light 10 channels 12V= LED running light -10 channelsFlash-LED 230V~ LED series printed circuit board 230V~ Christmas tree, 9V= Flasher, slow, 230V~ Twin flasher lamp 230V~ 3-Channel running light 230V~ Alarm flasher 230V~ 3-Channel music light Flasher 230V~ Light flasher 230V~ Running light, 230V~, 4-channel Halogen music light for 12V~ lamps Flasher 5...12V=, max. 1A Flasher /alternating flasher/ for 1 to 10 LED's at max. 6...12V= Flasher / alternating flasher for small glow lamps 6...12V= DC-Flasher, 12...24V=, max. 8A Flasher, slow, 230V~/110V~ 13 17 21 25 40 42 2 3 4 10 11 11 12 14 16 21 21 25 25 26 26 31 61 61 61 61 35 35 35 35 43 45 45 45 46 52
3. Flasher, running light and similar
7. Light barriers and similar

B045 B062 B123 B194 B213 B215 B216N B232 B232Z M116 M135 K002 Light barrier, 12V= Infrared light barrier, range over 18m Combination kit: Light barrier/heat switch/twilight switch, 12V= Light barrier Infrared light barrier max. 50m Mini-infrared light barrier, 10cm Infrared light barrier 5m Infrared stopwatch Additional light barrier for infrared stopwatch Infrared light barrier approx. 30m Light barrier 4m, 12V= Reflector mirror 6 8 16 23 28 28 29 31 31 53 56 70
8. Timer, precision timer, universal interval switch and similar

B042 B133 B191 M019 M113N M152 Time switch (short) approx. 2 sec. to 5 min. 12V= Precision timer, 12V= Mini timer 9V= Automatic light switch, 230V~ Time switch 12...15V=, 2 sec. to 10 (~30) min. Rain sensor, 12V= 5 17 23 37 52 58
9. Universal alarm systems and similar 4. Voltage-transformer and similar

B007 B038 B060 B065 B152 M015N M020 M029 M038N M062 Electrostat apparatus, 9...12V= Voltage converter from 12 V= up to approx. 220V~ Fluorescent lamp voltage transformer Voltage transformer Electronic fence appliance Potential transformer, max. 1,5A, input 6...28V=, output 3...15V= Voltage transformer from 24V= > 13,8V= Voltage converter, in: 6...14V=, out: 11...26V= Converter from 24V= > 12V= (13,8V=) Mini-fence-high-voltage-generator, 9...12V= 2 5 7 8 19 36 37 38 39 43 A002 A003 A004 B101 B190 B198 B214 M061 M073 M117 Alarm contact construction, brown Alarm Ccontact for embeddnig, brown Alarm contact construction, white Universal alarm system for car, boat, house, garden, yard Mini alarm system Alarm display Proximity sensor, ultrasonic-, 9...12V= Alarm monitor Motorbike alarm Alarm module for computers 71 71 71 13 22 24 28 42 45 53
80/GB
Kemo Electronic
9. Universal alarm systems and similar
A002 A003 A004 B101 B190 B198 B214 M061 M073 M117 Alarm contact construction, brown Alarm Ccontact for embeddnig, brown Alarm contact construction, white Universal alarm system for car, boat, house, garden, yard Mini alarm system Alarm display Proximity sensor, ultrasonic-, 9...12V= Alarm monitor Motorbike alarm Alarm module for computers page 71 71 71 13 22 24 28 42 45 53
Index Product Groups

page M087 M101 M101A M102N M103 M110 M111 M115N M119 M120 M121 M122 M124 M126N M128 M131N M136 M137 M138 M139 M142 M144 M148A M149 M150 M152 M155 M156 M158 M160 M161 M167 M168 M169 LED tester, 9V= battery Decalcifier against calcification and corrosion in water pipes Decalcifier 6...15V= Accumulator charger, 6...24V= Master-slave 230V~ Stepper motor driver 6 pin Marten shock for motor vehicles Marten defence for motor vehicles, 12...15V= Master-slave, 6...30V= Infrared spotlight, 12...15V= for CCD-cameras CCD-camera-dummy Twilight switch, 12V= Light sweller 12V=, max. 24W Electronic key, 12V= HF-Detector (Mini Spy Finder) Electronic spare key ring for M126N + B231 LED-Signal lamp red, 12V= LED-Signal lamp, green 12V= LED-Signal lamp, yellow 12V= Solar cell, approx. 0,6V= Constant current, LED-, 4...30V= Impulse switch-lock control Battery guard, (Accu saver), 12V= Solar charging controller, 12V=, 6A DC and pulse converter Rain sensor, 12V= Discharger for 7,2V, racing packs Sensor dimmer, 230V~, 1kW Water switch, 9...12V= Phase section regulator 110...240V~ Ultrasonic power cannon, 12...14,4V= Level indicator for water tanks Overvoltage protection 12V Temperature switch-thermostat 12V= 47 48 48 48 48 50 52 53 53 54 54 54 54 55 55 55 56 56 56 56 57 57 58 58 58 58 59 59 59 59 60 60 60 60
10. Modules and kits for computer and similar

B210 B240 M104 M106 M107 M108 M117 M125 Relay board, 8-channel-, 12V= Computer laser show 4-Channel computer switch Motor-interface, stepper-, 4 pin DC-motor-interface Interface switch, 4-fold Alarm module for computers Relay module 8-channel 27 32 49 49 49 50 53 54
11. Diverse kits, modules and devices

B011 B037 B048 B051 B055 B063 B081 B093 B107 B123 B127 B136 B137N B172 B180 B181 B192 B193 B195 B197 B200 B206 B211 B212 B217 B223 B224 B231 B233 B239 B241 FG002N FG014 FG015 FG016 L005 M012 M013 M028 M028N M043 M050 M057 M058N M060 M063 M067 M068 M068-5 M083 M084 M085 Sensor touch switch Number lock, sensor-, 12V= Temperature switch, 12V= Gas sensor Spirits tester, 12V= Metal searching device, 9V= Digital number lock with keyboard, 6V= Deftness game, 9...12V= Electronic dice, 6V= Robot voice, 9...12V= Combination kit: Light barrier/heat switch/twilight switch, 12V= Stereo decoder Electronic acupuncture, 3...6V= Ion generator, 12V= The little electro-technician, 4.5V= Speed control for mini-drilling machines, 12...24V= Paralyser 10.000V, 9V= Water level sensor 9V= Sensor switch 9V= Infrared detector, 9V= Relay card, 12V= Luminous letters Luminous letter control Stepper motor control, 6...12V= Decalcifier against calcification and corrosion in water pipes Smoke alarm 12V= Spotlight, infrared-, 12...14V= Laser show, 6V= Electronic key LED emergency light 6...15V=/~ Electronic wheel of fortune, 9...12V= Infrared remote control, 10-channel Dimmer 230V~ Marten repellent tester High power ultrasonic generator Exhaust Control Laser module for B224 Motor and lamp control, 240V~/110V~ Twilight switch, 210...240V~ Power control 110...240V~ 2600VA Power control 110...240V~ 4000VA Solar discharge protection module Transformer control, 230V~ Accumulator charging module Microwave leakage tester, 9V= Universal car noise filter Dimmer, 12V~, 50W (or 24...48V~) Electronic dog barking Electronic card switch, 9V= Substitutional cards (5 pcs) for M068 electronic card switch Accu-charging regulator, 12V= Telephone voltage protection Infrared detector, 9V= 2 5 6 6 7 8 10 11 14 16 17 18 18 20 20 20 23 23 24 24 25 26 27 27 29 29 30 30 31 32 33 61 62 62 62 30 36 36 37 38 40 41 42 42 42 43 43 44 44 46 46 46
12. Accessories
A001 A002 A003 A004 100 200 E001 E002 E003 E004 E005 E010 E011 E012 E013 E100 F001 G030 G040 G050 K001 K002 K062-4 K062-6 L001 L002 L003 L005 L006 L010 L100 P046 P055 P1089B P1089G P1089R P5123 ST04 TR01 W001 W100 Bending device Alarm contact construction, brown Alarm Ccontact for embeddnig, brown Alarm contact construction, white Corrosive Corrosive set, complete Platine FR3 Experimental board - dot grid Experimental board - strip grid Experimental board - dot grid Experimental board - strip grid Experimental board - punched raster Experimental board with strip raster Experimental board - strip grid Experimental board with 3 strip raster Developer Photopositive-coated board Case feet, black, small Case feet, black, medium Case feet, black, large Plug-in axle with button Reflector mirror Turning knob with grub screw for 4 mm axle Turning knob with grub screw for 6 mm axle Piezo-spherical cap-tweeter with flare Ultrasonic wall loudspeaker Piezo-tweeter Laser module for B224, B240, M133 Loudspeaker, small Ultrasonic piezo loudspeaker Conductive silver Solar motor for M139 Solar cell Electric motor Neon lamp Blue Neon lamp Green Neon lamp Red Mini-piezo electric-tweeter for M094 Euro-Socket Transformer for converter Plastic forceps Resistance timer / colour code 71 71 71 71 70 70 69 69 69 69 69 69 69 69 69 70 69 71 71 71 68 70 70 70 63 63 63 30 63 63 70 57 57 7 7 7 63 68 5 70 71
81/GB
Kemo-Electronic GmbH
Managing Director: Klaus Kernchen
Leher Landstrae 20 D-27607 Langen - Germany

Tel. 0049 4743-93380 Fax -933822 E-Mail: Kemo-Electronic@t-online.de http://www.kemo-electronic.de HR-Nr. : HRB 111 486 Id-Nr. DE 814 380 369 USt-Nr. 2349 049 200 309 15

Catalog GB

Uploaded by

Copyright:

Available Formats

Catalog GB

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Catalog GB

Uploaded by

Copyright:

Available Formats

Kemo

M169 Temperature switch thermostat 12 V=

NEW NEW NEW NEW

The prices are recommended selling-prices.

Copyright 2008 by Kemo-Electronic GmbH, K. Kernchen, D-27607 Langen.

-------------------------------------------------------------------------------------Kits + modules for computer 27,49,50,53,54

Price: 3.00 Fitting case: G027

B005 Mosquito banisher, flea and tick banisher

Price: 3.90 Fitting case: G01B

B007 Electrostat apparatus

Price: 5.80 Fitting case: G022

B011 Sensor touch switch

Price: 10.80 Fitting case: G027

Price: 10.80 Fitting case: G01B

B015 Fog horn, 5 W

Price: 3.80 Fitting case: G027

Price: 8.10 Fitting case: G027

B022 6-Channel lighting console

Price: 11.80 Fitting case: G086

Price: 11.80 Fitting case: G089

Price: 5.80 Fitting case: G010

B038 Voltage converter from 12 V= up to

TR01 Transformer for converter

B042 Time switch (short) approx. 2 sec...5 min.

Price: 5.80 Fitting case: G024

Price: 7.80 Fitting case: G027

B048 Temperature switch 12 V=

Price: 7.80 Fitting case: G027

B051 Gas sensor - Spirits tester

Price: 11.80 Fitting case: G024

B052 Destroyer siren

Price: 10.80 Fitting case: G027

Price: 5.80 Fitting case: G01B

B060 Fluorescent lamp voltage transformer

Price: 10.80 Fitting case: G010

Price: 13.80 Fitting cases: G026+G027

B063 Digital number lock with super-flat foil keyboard!

Price: 7.80 Fitting case: G010

Price: 18.90 Fitting case: G010

Price: 11.80 Fitting case: G081

B073 Pre-Amplifier, universal

super wideband: approx. 10 Hz...150 kHz

Price: 3.80 Fitting case: G027

B077 Martin siren - german police siren 12 V= max. 15 W!

Price: 10.80 Fitting case: G082

Price: 3.80 Fitting case: G027

Price: 9.80 Fitting case: G081

B088 Mini traffic light

Price: 8.10 Fitting case: G027

Price: 16.30 Fitting case: G081

B092 LED-alternating flasher

Price: 3.80 Fitting case: G01B

B093 Electronic dice

Price: 5.80 Fitting case: G100

Price: 5.80 Fitting case: G027

B097 4-Channel running light 230 V~ + 12 V=

Price: 13.40 Fitting case: G027

B099 Special antenna amplifier 30...850 MHz

Price: 7.80 Fitting case: G082