Delhi Schedule Rate

All rights reserved.
No part of this publication, either in English or in Hindi, may be reproduced in any form or by any means, electronic or mechanical, including photocopy, recording or any information storage and retrieval system, without permission, in writing, from the Director General (Works), CPWD, New Delhi. A GOVERNMENT OF INDIA PUBLICATION Published by DIRECTOR GENERAL (WORKS) CPWD, NIRMAN BHAWAN, NEW DELHI-110 011 & Printed & Marketed by JAIN BOOK AGENCY Authorised Dealers of Govt. Publications C-9, Connaught Place, New Delhi-110001 Phones : 23416390 upto 97, 41513852 E-mail : sales@jainbookagency.com Website : www.jainbookagency.com Distributed by JBA DISTRIBUTORS N-67, First Floor, Munshiram Building, Connaught Place, New Delhi-110001 Phone : 41523870, 23354824 Fax : 41513850 E-mail : sales@jba.in Website : www.jba.in JAIN BOOK AGENCY (SOUTHEND) 1, Aurobindo Place Market, Hauz Khas, New Delhi-110016 Phone : 26567066, 26566113,41758700 E-mail : sales@jainbookagency.com Website : www.jainbookagency.com JAIN BOOK AGENCY (GURGAON) 12, Central Plaza Mall, Sector 53, Golf Course Road, Gurgaon 122002 Haryana
DIAL-A-BOOK 011-4175 8700
Books will be delivered next day by COURIER (Payment to courier-boy) in Delhi, Noida, Ghaziabad, Faridabad & Gurgaon (nominal courier charges extra) Also available at All Leading Booksellers & Authorised Govt. Dealers In India Price : Rs. 500/- (excluding postage and forwarding charges etc.)
FOREWORD
Delhi Schedule of Rates, being published by C.P.W.D. from time to time, is a very comprehensive document and useful in execution of works. Apart from C.P.W.D., this Schedule of Rates is being used as a guide by a number of departments, public sector undertakings, private sector builders and architects etc. The Central Public Works Department Schedule of Rates was first compiled in the year 1931, followed by a number of revisions from time to time in order to bring it in line with the prevailing technology and market rates. In the last thirty years, the Delhi Schedule of Rate has been revised seven times in the years 1977, 1981, 1985, 1989, 1993, 1997 & 2002. The last Delhi Schedule of Rates was printed in 2002. The prices of labour and materials have registered substantial increase since then. Besides the cost, there has been spurt of new construction materials and introduction of mechanized construction techniques for speedier construction. This has necessitated revision of existing DSR 2002 to include the above changes. Accordingly, this Delhi Schedule of Rates, 2007 has been prepared incorporating element of machinery and prefabricated building components, wherever applicable. Although this DSR contains most of the items of DSR 2002, the nomenclature of many items has been improved by making it more generic by deleting the brand names and making it more comprehensive by providing reference to various BIS standards and locations in regard to their applicability. Items which are either obsolete or are not in use have been deleted. Number of items have been clubbed to facilitate convenience in taking measurements. Several new items, based on new materials and new technologies in the construction sector, being adopted in CPWD works, have also been included in this document. I wish to place on record the technical input and the effective coordination on the part of Shri D.S.Sachdev, ADG(TD) and the efforts put in by Shri Suresh Kumar, CE(CSQ) and his team of officers in TAS unit in finalising the DSR in a record time. I am sure that this Schedule of Rates will be quite useful to all concerned in the Building industry in general and CPWD in particular.
New Delhi December, 2007
(A. CHAKRABARTI ) DIRECTOR GENERAL (WORKS)
PREFACE
1.0 2.0. Delhi Schedule of Rates, 2007 is the revised edition of Delhi Schedule of Rates, 2002. This Delhi Schedule of Rates, 2007 incorporates most of the items of DSR 2002 with all Correction Slips up-to date and will replace DSR 2002. The nomenclature of many items has been improved by making it more generic and comprehensive. Items of DSR 2002, which have become obsolete over a period of time or are not in use have been deleted. Some items have been clubbed to facilitate quick measurements. Many new items using new materials and latest technology have also been added. Efforts have been made to introduce items pertaining to execution of different works by using various electrical and mechanical equipments i.e. excavators, tower cranes, mobile cranes, mechanical platforms, Batch Mix plant, transit mixers and pumps, piling rigs, pneumatic cutters, chisels, chippers, hammers etc. Built-in provision has been taken in the analysis of rates for new construction technology/ mechanisation. Items of dry work using prefabricated materials and pre-finished elements are included for speedier construction viz gypsum block walls, calcium silicate and non- asbestos cement board partitions, prefinished counter tops for kitchen and washbasins, pre-moulded and pre-finished stone work in risers and treads of steps and window sills, dry stone cladding, sub-frames for windows, use of chemical and mechanical fasteners, laying of tiles in flooring and dado with polymer based adhesives etc. Brand names of materials have been deleted from nomenclature of items to make them generic in nature. This Schedule of Rates is based on the study of current market rates of materials at Delhi, collected during the period of April, 2007 to October, 2007 and labour rates are the current minimum wages issued by the Government of Delhi w.e.f. 01-09-2007.. DARs 1997 are under revision. Till the publication of revised DARs, existing DARs -1997 shall be followed after correlating with relevant items. The sundries should be considered as 2.60 times based on C.I. of Delhi as 260 as on 1.10.2007 over DPAR 1-01-1992 as 100. The following are the salient features of DSR 2007 : DSR 2007 is a bilingual document (Hindi version will follow). Basic rates of relevant/related materials are provided sub-head wise at the start of each sub-head for the first time for convenience of the users. All the sub-heads of building work, road work, services, horticulture and cement & bitumen consumption coefficients of various items, have been compiled in this volume. This Schedule will be read along with CPWD Specifications, 1996 Vol. I to VI with up-to date correction Slip nos. 1 to 19 & Revised CPWD Specifications 2002 for Mortar, Cement Concrete & RCC till these are amended/ modified. For the new items introduced in this DSR, new Code Nos., have been assigned as indicated in the list of basic materials.
(ii)
3.0
4.0
5.0 6.0
7.0
8.0 8.1 8.2 8.3 8.4
8.5
8.6 8.7
Generally, the basic rates of materials, incorporated in the schedule, are pertaining to materials conforming to BIS Standards/CPWD Specifications/Materials of best quality available in the market. Lump sum provision of labour/ T& P is replaced with mechanisation inputs. Prominent items incorporating mechanization are earth-work in excavation, RMC / BMC, brick work in superstructure above floor V level, road work, dismantling of R.C.C. work, dismantling of C.C. and flexible pavements, pile work etc. Sub- head wise salient features are as follows: Carriage of Materials: Items have been properly serial numbered. Earth Work: Items of Earth work in excavation in soils, ordinary rocks and hard rocks by manual means have been modified to manual or mechanical means and component of mechanization is included with corresponding reduction in labour component. Mortars: Items with lime mortar which are not in use now a days have been deleted. Concrete Work: Items of lime concrete which are not in use now a days are deleted. Number of uses of steel and wooden shuttering reduced from 80 and 16 times to 40 and 8 times respectively, so that proper quality of shuttering is put to use. Reinforced Cement Concrete: Minimum mix of RCC is kept as M-25 instead of M-20 concrete. It is as per CPWD Specifications, 2002 and IS: 456: 2000 for durability of structures. New item of form work with 12 mm thick prelaminated ply has been included. Use of fly ash conforming to Grade I of IS: 3812 ( Pt. 1) : 2003 has been allowed in Batch Mix Concrete and Ready Mixed Concrete as part replacement of OPC. Fly-ash should be uniformly blended with cement in accordance of Clause 5.2 & 5.2.1 of IS-456. Number of uses of steel and wooden shuttering reduced from 80 and 16 times to 40 and 8 times respectively, so that proper quality of shuttering is put to use. Brick Work: Items pertaining to brick work with lime mortar and cement mortar with fine sand deleted, since these items are not in use now a days. Items of auto-claved aerated cement block masonary, mechanized auto-claved fly-ash lime bricks & gypsum panel partitions included. Stone Work: New items of stone work for providing and fixing dry cladding at all heights with 40 mm thick gang saw cut sand stone etc. and structural steel frame work for stone cladding ( to be paid in kg.) has been added. Items of stone masonry in cement mortar with fine sand and with lime mortar are deleted. Marble Work: Measurement for area of marble/granite stone flooring modified to two groups of up to 0.50 sqm & over 0.50 sqm. Items of pre-moulded and pre-polished flooring in treads/risers of staircase, kitchen/ washbasin counters and window sills have been provided. Wood Work: Wood work in doors & windows for frames / shutters in deodar wood deleted as deodar wood is not easily available. However, use of other species of wood available in market has been allowed. Relevant IS codes for items of LVL door shutters & frames, Flush door shutters, veneer boards etc, wherever not mentioned in the items earlier, have been added now. Ordinary glass panes substituted with float glass which is to be specified by thickness and not by weight. Items of bamboo jaffery fencing, magnetic catcher in cup board, mortice lock, telescopic drawer channel included. FRP flush & panelled doors & frames and FRP chajjas included.
(iii)
9.0 9.1 9.2
9.3 9.4
9.5
9.6
9.7
9.8
9.9
9.10
Steel Work: Steel glazed doors & windows fixed, side hung, top hung, centre hung, composite units including mullion bar and steel beadings are clubbed together and to be paid in Kg in one item instead of earlier being measured in sqm. Nomenclature modified to specify Flash welding & Factory made Steel glazed doors & windows in item. Flooring: Items pertaining to extra for brick flooring in specified pattern, 25mm & 50mm thick C.C. flooring, flooring & skirting in red oxide, & other items not in frequent use deleted. New item of laying tiles in flooring and dado with polymer based adhesives included. Roofing : Non- asbestos cement sheet provided in place of asbestos cement sheet roofing. Items of corrugated G.S. sheet roofing -1.60mm thick & 1.25mm thick deleted as theses are not readily available. 20 mm thick wooden planks ceiling, 18mm insulating board, 18 mm flame retardant board on roofs deleted as boards of these thicknesses are not readily available. Lime concrete terracing deleted. Finishing: Flush/ ruled/ struck/ weathered pointing in brick work, tile work and stone work clubbed. New item of 12 mm thick gypsum plaster on brick /RCC surfaces added. Items of plaster with lime deleted. Providing and mixing water proofing material is to be paid in Kg per bag of cement instead of sqm. Repair to Building: Making opening in brick masonry for doors, windows and clerestory windows to be paid in sqm instead of being paid in numbers. Fixing chowkhats in brick / RCC opening with mechanical/ chemical fasteners included. Double scaffolding for repairs to building included. Items of wooden cleats, safeda posts & hollock ballies deleted. Pointing with lime putty on brick/tile work deleted. Coal tarring on old work, floor painting with enamel paint, rubber plug for sink/ wash basin etc deleted. Ordinary glass panes changed to float glass and thickness to be measured in mm. instead of weight. Dismantling and Demolishing : New item of dismantling and demolishing by pneumatic hammers, chisels, chippers etc. included. Road Work: Fencing with M.S.barbed wire on sal ballies, concrete rail & pale and RCC sign/ name boards deleted. Items of preparation and consolidation of sub grade clubbed together. Supplying R.C.C. posts /struts /rails /pales at site are clubbed together and to be paid in cubic meter instead of numbers. Mix modified to 1: 1.5:3 instead of 1:2:4. New items of Concertina coil fencing & Chain link fencing, Dense Bituminous Macadam, Bituminous Macadam, Dense Bituminous Concrete with CRMB & PMB are added. Various signages viz Caution / regulatory retro- reflective boards & over head signage boards, Road marking (retro- reflective ) are also included. Kerb channel, post delineators. Factory made RCC pavement slabs, CC interlocking paver blocks & kerb stones, vacuum de-watered CC pavement, scarifying BM by mechanical means etc have also been included. Sanitary Installations: Items of long pan W.C., C..P. brass trap & union, G.I. chain with G.I. pull are not in use now a days and hence deleted. Relevant IS 1729 has been mentioned with fittings of sand cast iron pipes. Fittings of Centrifugally cast Iron pipes have been modified as Sand cast iron S&S as per IS: 3989 from existing Centrifugally cast ( Spun) iron S&S, as fittings are not manufactured by centrifugal process. Water Supply: PE-AL-PE fittings have been clubbed with main item of PE-AL-PE pipe. New items of PP-R pipes and CPVC pipes included. Item of close hole basin mixer pillar tap has been deleted.
(iv)
9.11
9.12
9.13
9.14
9.15 9.16
9.17
9.18
9.19
Drainage: Item of Stone ware pipes grade A with mixture of cement mortar 1:3 for storm water drains deleted. P traps of size 125x100 & 180x100 deleted. Manholes of size 90x80 & 60cm deep deleted as items of 45 cm depth & extra for depth beyond 45 cm are available. Circular Manholes 0.91 m dia, 1.6 m deep deleted as items of 0.91m depth & extra for depth are available. Similarly, circular manholes 1.22 m dia, 2.29 m deep and circular manholes 1.52 m dia, 4.18 m deep deleted. Brick masonary open surface drain deleted. Brick masonary work, plaster & excavation etc. shall be measured as per actual.Item of Grease trap deleted as not executed now a days. Pile Work : Mechanical equipments such as hydraulic piling rig, crane, bentonite pump, vibrating pile driving hammer etc. have been introduced in place of lump sum provisions. The labour coefficients have been reduced due to the provisions made for mechanical equipments. Piles up to1500 mm dia. have been incorporated. Aluminium Work : Powder coated & Polyester powder coated aluminium sections and Z sections included. Ordinary glass panes substituted with float glass panes. MS adjustable hangers substituted with GI adjustable hangers for false ceiling. Extra for providing anodic coating AC 25 instead of AC 15 on aluminium sections included. Items of weather silicon sealant, double glazed hermetically sealed glazing added. Stainless steel adjustable friction window stays for easy cleaning of glass on both sides from the room also included. Aluminium sub frame for windows & ventilators included. New items of Tubular handle bar with anodizing, powder coating & polyester powder coating, Brass lock for aluminium doors, aluminium casement window fasteners for windows, aluminium round shape handles etc. included. Water Proofing : Use of red sand stone, lime concrete in grading roof for water proofing treatment, composite roof insulation & water proofing is not in common use, hence deleted. Horticulture & Landscaping : Rates of the items updated. A lot of effort has gone into the preparation of this Schedule of Rates. I convey my deep appreciation and sincere thanks to Shri Suresh Kumar CE CSQ, Shri Mayank Tilak S.E. (TAS), Sh. S.C Malik EE (S&S), Sh. S.K.Jain EE (S&S), Sh. A.V.R. Bhat EE (S&S), Sh. S.K.Sarkar AE, Sh. V.P.Singh AE, Sh.S.S.Pal AE and other officers and staff of TAS Unit for sincere efforts made in the preparation of this document in such a short time. Thanks are also due to all field officers who have contributed actively in finalising this DSR. Due care has been taken to print the Schedule of Rates as correctly as possible. It is, however, possible that some errors might have crept in. In case any error or omission is noticed, it may be brought to the notice of the Superintending Engineer (TAS), CPWD, Room no. 418, A, Nirman Bhawan, New Delhi. In case of any discrepancy between English and Hindi versions, the English version shall be held valid.
9.20
9.21
9.22 9.23 10.
11.
12.
Suggestions for improvement are welcome. (D.S.SACHDEV ) ADG (TD), CPWD, Nirman Bhawan, New Delhi
(v)
BASIC APPROACH FOR PREPARATION OF DELHI SCHEDULE OF RATES, 2007
1.
DSR 2007 has been prepared on the basis of coefficients of labour, materials, sundries, hire charges etc. adopted in DAR 1997 and market rates of materials at Delhi collected during the period of April 2007 to October 2007. Labour rates are current minimum wage rates issued by the Government of National Capital Territory of Delhi w.e.f. 01-09-2007. DARs 1997 are under revision. Till the issue of revised DARs, existing DARs 1997 may be followed after correlating with relevant items. Sundries have been considered as 2.60 times based on Cost Index of Delhi as 260 as on 1.10.2007 over DPAR 01-01-1992 as 100. Contractors profit and Overheads @ 15% has been adopted as approved by the DGW vide Office Memorandum no. DG (W) MAN/150 dated 14/12/2007. This schedule will be read along with CPWD specifications, 1996 Vol-1 to VI with up-to- date correction slips, 1 to 19 and revised CPWD Specifications 2002 for Mortar, Cement concrete and RCC till these are amended/ modified.
2. 3. 4. 5.
(vi)
C O N T E N T S
SH. NO NAME OF SUB-HEAD BASIC RATES 0.1 0.2 0.3 0.4 Hire Charges of Plants Labour Materials Carriage Code SUB - HEADS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. Carriage of Material Earth Work Mortars Concrete Work Reinforced Cement Concrete Work Brick Work Stone Work Marble Work Wood and PVC Work Steel Work Flooring Roofing Finishing Repairs to Buildings Dismantling & Demolishing Road Work Sanitary Installation Water Supply Drainage Pile Work Aluminium Work Water Proofing Horticulture and Landscape CEMENT CONSUMPTION STATEMENT BITUMEN CONSUMPTION STATEMENT 51 61 71 75 83 95 105 117 123 159 167 179 197 209 223 233 253 277 309 325 333 341 351 357 419 1 3 5 48 PAGE NO.
(vii)
BASIC RATES
xi
BASIC RATES 0.1 HIRE CHARGES OF PLANTS

Code No 0001 0002 0003 0004 0005 0006 0007 0008 0009 0010 0011 0012 0013 0014 0016 0017 0018 0019 0020 0021 0022 0024 0025 0026 0027 0028 0029 0030 0033 Description Hire charges of Coaltar Boiler 900 to 1400 litres Hire charges of Concrete Mixer 0.14 cubic metre Hire charges of Diesel Road Roller - 8 to 10 tonne Production cost of concrete by batch mix plant. Hire charges of Diesel Truck - 9 tonne Hire charges of Spraying machine including electric charges Hire charges of Coaltar Sprayer Hire charges of Barber green, drying, mixing and Asphalt Plant, with accessories, capacity 30/45 tonne Pumping charges of concrete including Hire charges of pump, piping work & accessories etc. Hire charges of Derrick monkey rope Hire charges of Pump set of capacity 4000 litres/hour. Vibrator (Needle type 40mm) Machine for rubbing of floors Front end loader Mastic Cooker Hire and running charges of tipper Hire and running charges of loader. Hand Grinder For mirror polish Hydraulic Excavator (3D) with driver and fuel. Pin vibrator Surface Vibrator Hire and running charges of hydraulic piling rig with power unit etc. including complete accessories and shifting at site. Hire and running charges of light crane. Hire and running charges of bentonite pump. Hire and running charges of vibrating pile driving hammer complete with power unit and accessories. Hire and running charges of crane 20 tonne capacity. Carriage of concrete by transit mixer. Generator 250 KVA. Paint applicator. Unit Day Day Day cum Day Day Day Day 7,050.00 cum 80.00 Day Day Day Day Day Day Day Day Day Day Day Day per day 28,000.00 per day per day per day 28,000.00 per day km/ cum per day per day 8,000.00 18.00 1,600.00 680.00 2,000.00 4,000.00 500.00 300.00 200.00 200.00 6,000.00 515.00 1,030.00 800.00 100.00 6,000.00 288.00 330.00 Rate Rs. 595.00 400.00 1,000.00 200.00 1,008.00 173.00 250.00
Code No 0037 0038 0039 0040 0041 0042 0043 0045 0046 0047 0048
Description Mobile crane. Tractor with ripper attachment. Tractor with trolley. Air compressor 250 cfm with two leads for pneumatic cutters/ hammers. Joint cutting machine with 2-3 blades C.C .batch mix plant. Road sweeper Slip form paver with sensor. Water tanker 5000 litr. capacity Concrete joint cutting machine. Texturing machine. Note :- Above hire - charges include cost of services of operating staff and supply of lubricating oil.
Unit per day per day per day day
Rate Rs. 5,000.00 1,000.00 1,000.00 1,600.00
per day day day day day day day
800.00 88,000.00 480.00 12,000.00 800.00 800.00 800.00
BASIC RATES 0.2 LABOUR

Note :- These rates are exclusive of contractors profit and over heads and are inclusive of wages for weekly day of rest
Code No 0100 0101 0102 0103 0111 0112 0113 0114 0115 0116 0117 0119 0122 0123 0124 0125 0126 0127 0128 0130 0131 0132 0133 0134 0135 0138 0139 0141 0155*
Description Unit Bandhani Bhisti Blacksmith 1st class Blacksmith 2nd class Carpenter 1st class Carpenter 2nd class Chowkidar Beldar Coolie Fitter (grade 1) Assistant Fitter or 2nd class Fitter Glazier Mason (for plaster of paris work) 1st class Mason (brick layer) 1st class Mason (brick layer) 2nd class Mason (for plain stone work) 2nd class) Mason (for ornamental stone work) 1st class Driver (for Road Roller, Concrete Mixer, Truck etc.) Mate Mistry Painter Rock Excavator Rock Breaker Rock Hole Driller Stone Chiseller Sprayer (for bitumen, tar etc.) Skilled Beldar (for floor rubbing etc.) White Washer Mason (average) Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day
Rate Rs. 138.45 138.45 151.50 141.60 151.50 141.60 135.25 135.25 135.25 151.50 141.60 141.60 151.50 151.50 141.60 141.60 151.50 151.50 138.45 151.50 141.60 135.25 135.25 135.25 138.45 138.45 138.45 138.45 146.55
Code No 0156* 0157 0159
Description Unit Carpenter (average) Operator (Pile/ Special machine) Skilled torch operator for laying tack Note :- * These rates are average of 1 class and 2 class categories. This is for use in the analysis of rate only.
st nd
Rate Rs. 146.55 166.00 151.50
Day Day Day
BASIC RATES 0.3 MATERIALS

Note :- These rates are exclusive of contractors profit, over heads and carriage but include octroi, royalty, sales tax (VAT) etc.
Code No 0222 0223 0224 0225 0226 0227 0228 0229 0230 0231 0232 0233 0234 0235 0236 0237 0285 0286 0287 0291 0292 0293 0294 0295 0296 0297 0298 0302 0304 0305
Description Seam bolts and nuts 6 mm dia and 25 mm long Non - Asbestos fibre cement corrugated sheet 6mm thick. Non - Asbestos fibre cement close fitting adjustable ridge. Non - Asbestos fibre cement corrugate serrated adjustable ridge. Non - Asbestos fibre cement plain wing adjustable ridge. Non - Asbestos fibre cement unserrated adjustable ridge for hips. Non - Asbestos fibre cement corrugated apron piece. Non - Asbestos fibre cement eaves filler piece. Non - Asbestos fibre cement north light curves. Non - Asbestos fibre cement ventilator curves. Non - Asbestos fibre cement barge boards 6 mm thick. Non - Asbestos fibre cement ridge finial . Non - Asbestos fibre cement special north light curves. Non - Asbestos fibre cement S type louvers. Non - Asbestos multi purpose fibre cement board 6mm thick. Non - Asbestos multi purpose fibre cement board 8mm thick. Brick Aggregate (Single size) : 63 mm nominal size Brick Aggregate (Single size) : 50 mm nominal size Brick Aggregate (Single size) : 40 mm nominal size Stone Aggregate (Single size) : 63 mm nominal size Stone Aggregate (Single size) : 50 mm nominal size Stone Aggregate (Single size) : 40 mm nominal size Stone Aggregate (Single size) : 25 mm nominal size Stone Aggregate (Single size) : 20 mm nominal size Stone Aggregate (Single size) : 12.5 mm nominal size Stone Aggregate (Single size) : 10 mm nominal size Stone Aggregate (Single size) : 06 mm nominal size Safeda ballies 125 mm diameter Bajri Bamboo 25 mm dia 2.5 metre long
Unit 10 Nos sqm metre metre metre metre metre each metre each metre pair each each sqm sqm cum cum cum cum cum cum cum cum cum cum cum metre cum score
Rate Rs. 30.00 205.00 203.00 174.00 188.00 195.00 126.00 93.00 197.00 267.00 232.00 84.00 275.00 161.00 180.00 239.00 350.00 355.00 360.00 600.00 625.00 650.00 675.00 700.00 700.00 700.00 750.00 29.00 510.00 192.00
BASIC RATES 0.3 MATERIAL
Code No 0308 0309 0310 0312 0313 0314 0316 0317 0318 0322 0324 0325 0326 0328 0332 0336 0339 0341 0346 0347 0348 0362 0364 0365 0367 0368 0370 0373 0378 0379 0380 0381
Description Bhusa Paving bitumen S-90 of approved quality Bitumen emulsion Bitumen grade PMB - 40 Blown type petroleum bitumen of penetration 85/25 of approved quality Bitumen hot sealing compound : grade A Bitumen solution primer of approved quality Premoulded joint filler 12 mm thick Bitumen felt fibre base (vegetable or animal):Type 2 grade 1 Bitumen felt :Type 3 grade 1 Coal Tar Blasting powder Blasting fuse (fuse wire) White face insulating board:12 mm thick Natural colour insulating board:12 mm thick Flame retardant face insulating board: 12 mm thick Flame retardant face insulating, Impregnated fibre board 12 mm thick Flat pressed 3 layer particle board (medium density) Grade I :12 mm thick Extra for veneered particle board with : Teak veneering on one side and commercial veneered on other side Extra for veneered particle board with : Commercial veneering on both sides Extra for veneered particle board with : Teak veneering on both sides Brick bats Wire brush Soft brush Portland Cement White Cement Coal (steam) Cramp Gun metal 25x6x300 mm Brass butt hinges (light/ordinary type) : 125x70x4 mm Brass butt hinges (light/ordinary type) : 100x70x4 mm Brass butt hinges (light/ordinary type) : 75x40x2.5 mm Brass butt hinges (light/ordinary type) : 50x40x2.5 mm
Unit quintal tonne tonne M.T. tonne kilogram litre sqm sqm sqm litre kilogram each sqm sqm sqm sqm sqm sqm sqm sqm cum each each tonne tonne quintal each 10 Nos 10 Nos 10 Nos 10 Nos
Rate Rs. 200.00 22,500.00 19,500.00 30,000.00 25,000.00 20.00 28.00 300.00 45.00 45.00 16.00 25.00 10.00 239.00 175.00 208.00 279.00 258.00 198.00 102.00 366.00 253.00 15.00 12.00 4,500.00 9,700.00 300.00 53.00 450.00 300.00 160.00 90.00
Code No 0382 0383 0384 0385 0386 0387 0388 0389 0390 0391 0392 0393 0394 0400 0401 0402 0403 0404 0405 0406 0408 0409 0410 0411 0412 0413 0414 0417 0418 0419 0420 0421 0422 0423
Description Brass butt hinges (heavy type) : 125x85x5.5 mm(.70)kg Brass butt hinges (heavy type) : 100x85x5.5 mm(.56)kg Brass butt hinges (heavy type) :75x65x4.0 mm(.20)kg Brass parliamentary hinges 150x125x27x5 mm Brass parliamentary hinges 125x125x27x5 mm Brass parliamentary hinges 100x125x27x5 mm Brass parliamentary hinges75x100x20x3.2 mm Brass single acting spring hinges 150 mm Brass single acting spring hinges 125 mm Brass single acting spring hinges 100 mm Brass double acting spring hinges 150 mm Brass double acting spring hinges 125 mm Brass double acting spring hinges 100 mm Brass tower bolt (barrel type) 250x10 mm Brass tower bolt (barrel type) 200x10 mm Brass tower bolt (barrel type) 150x10 mm Brass tower bolt (barrel type) 100x10 mm Brass flush bolt 250 mm Brass flush bolt 150 mm Brass flush bolt 100 mm Brass handles 125 mm with plate 175x32 mm Brass handles 100 mm with plate 150x32 mm Brass handles75 mm with plate 125x32 mm Brass door latch 300x16x5 mm (0.380 kg) Brass door latch 250x16x5 mm (0.350 kg) Brass mortice latch and lock 100x65 mm with6 levers and a pair of brass lever handles Brass mortice latch 100x65mm with a pair of brass lever handles Brass 150 mm floor door stopper (0.357kg) Brass hard drawn hooks and eyes 300 mm Brass hard drawn hooks and eyes 250 mm Brass hard drawn hooks and eyes 200 mm Brass hard drawn hooks and eyes 150 mm Brass hard drawn hooks and eyes 100 mm Brass casement window fastener
Unit 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos each each each each each each each each each each each each each each each each each each each each each 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos Each
Rate Rs. 1,500.00 1,300.00 450.00 1,650.00 1,450.00 1,175.00 888.00 200.00 158.00 106.00 317.00 216.00 173.00 123.00 100.00 75.00 51.00 84.00 65.00 44.00 85.00 75.00 55.00 85.00 82.00 257.00 235.00 104.00 457.00 423.00 390.00 364.00 300.00 26.00
Code No 0424 0425 0426 0427 0428 0429 0430 0431 0432 0433 0438 0442 0444 0445 0446 0447 0449 0450 0451 0452 0453 0524 0525 0526 0527 0528 0555 0556 0557
Description Brass casement stays (straight peg type ) 300 mm weighing not less than 0.33 kg Brass casement stays (straight peg type ) 250 mm weighing not less than 0.28 kg Brass casement stays (straight peg type ) 200 mm weighing not less than 0.24 kg Brass quadrant stays 300 mm Brass fanlight catch Brass fanlight pivot Brass chain with hook for fan light catch Brass hasps and staples (safety type) 300 mm Brass hasps and staples (safety type) 115 mm Brass hasps and staples (safety type)90 mm Brass Night latch Brass helical spring 150 mm Brass curtain rod 20 mm dia 1.25 mm thick Brass curtain rod 25 mm dia 1.25 mm thick Brass brackets (curtain rods) 20 mm Brass cupboard knob or ward robe knob 50 mm Brass screws 50 mm Brass screws 40 mm Brass screws 30 mm Brass screws 25 mm Brass screws 20 mm Chromium plated Brass butt hinges (heavy) type 75x65x4 .0 mm (200gms) Chromium plated Brass butt hinges (light/ordinary) type 125x70x4 mm Chromium plated Brass butt hinges (light/ordinary) type 100x70x4 mm Chromium plated Brass butt hinges (light/ordinary) type 75x40x2.5 mm Chromium plated Brass butt hinges (light/ordinary) type 50x40x2.5 mm Chromium plated Brass handles 125 mm with plate 175 x32 mm Chromium plated Brass handles 100 mm with plate 150 x 32 mm Chromium plated Brass handles 75mm with plate 125x32 mm
Unit
Rate Rs.
each Each each each 10 Nos 10 Nos each 10 Nos 10 Nos 10 Nos each each metre metre each each 100 Nos 100 Nos 100 Nos 100 Nos 100 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos Each Each Each
66.00 55.00 46.00 73.00 109.00 128.00 13.00 458.00 378.00 300.00 338.00 185.00 63.00 79.00 24.00 18.00 107.00 96.00 86.00 76.00 53.00 430.00 433.00 385.00 135.00 105.00 92.00 79.00 68.00
Code No 0558 0568 0569 0570 0571 0583 0584 0585 0586 0587 0588 0589 0590 0591 0592 0594 0595 0596 0597 0608 0635 0637 0638 0639 0640 0641 0642 0643 0644
Description Chromium plated Brass mortice latch and lock 100x65 mm with6 levers and a pair of brass lever handles Chromium plated brass casement window fastener Chromium plated Brass casement stays (straight peg type ) 300 mm weighing not less than 0.33 kg Chromium plated Brass casement stays (straight peg type ) 250 mm weighing not less than 0.28 kg Chromium plated Brass casement stays (straight peg type ) 200 mm weighing not less than 0.24 kg Chromium plated Brass Night latch Chromium plated Brass Wardrobe Knob 50 mm Chromium plated Brass screws 50 mm Chromium plated Brass screws 40 mm Chromium plated Brass screws 30 mm Chromium plated Brass screws 25 mm Chromium plated Brass screws 20 mm Chromium plated Brass curtain rod 12 mm dia 1.25mm thick Chromium plated Brass curtain rod 20 mm dia 1.25mm thick Chromium plated Brass curtain rod 25 mm dia 1.25mm thick Bright finished or black enameled mild steel butt hinges 125x65x2.12 mm Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm Bright finished or black enameled mild steel butt hinges75x47x1.70 mm Bright finished or black enameled mild steel butt hinges50x37x1.50 mm Nickel plated mild steel piano hinges 1 mm thick 35 mm wide Bright finished or black enameled mild steel screws 50 mm Bright finished or black enameled mild steel screws 40 mm Bright finished or black enameled mild steel screws 30 mm Bright finished or black enameled mild steel screws 25 mm Bright finished or black enameled mild steel screws 20 mm Bright finished or black enameled mild steel bolts and nuts 50x6 mm Oxidised mild steel butt hinges 125x65x2.12 mm Oxidised mild steel butt hinges 100x58x1.90 mm Oxidised mild steel butt hinges75x47x1.70 mm
Unit
Rate Rs.
each each each each each each each 100 Nos 100 Nos 100 Nos 100 Nos 100 Nos metre metre metre 10 Nos 10 Nos 10 Nos 10 Nos metre 100 Nos 100 Nos 100 Nos 100 Nos 100 Nos each 10 Nos 10 Nos 10 Nos
323.00 55.00 73.00 67.00 56.00 383.00 25.00 123.00 150.00 90.00 83.00 63.00 122.00 143.00 239.00 78.00 54.00 34.00 28.00 21.00 40.00 30.00 24.00 15.00 15.00 4.00 92.00 53.00 32.00
Code No 0645 0646 0647 0648 0649 0650 0651 0652 0653 0654 0655 0656 0660 0661 0662 0663 0664 0665 0666 0667 0668 0669 0670 0679 0680 0681 0682 0683 0684 0685 0686 0687 0688 0689
Description Oxidised mild steel butt hinges50x37x1.50 mm Oxidised mild steel parliamentary hinges150x125x27x2.8 mm Oxidised mild steel parliamentary hinges 125x125x27x2.8 mm Oxidised mild steel parliamentary hinges 100x125x27x2.8 mm Oxidised mild steel parliamentary hinges 75x100x20x2.24 mm Oxidised mild steel single acting spring hinges 150 mm Oxidised mild steel single acting spring hinges 125 mm Oxidised mild steel single acting spring hinges 100 mm Oxidised mild steel double acting spring hinges 150 mm Oxidised mild steel double acting spring hinges 125 mm Oxidised mild steel double acting spring hinges 100 mm Nickel plated mild steel piano hinges 1 mm thick 35 mm wide Oxidised mild steel sliding door bolt 300x16 mm Oxidised mild steel sliding door bolt 250x16 mm Oxidised mild steel door latch 300x20x6 mm Oxidised mild steel door latch 250x20x6 mm Oxidised mild steel tower bolt (barrel type) 250x10 mm Oxidised mild steel tower bolt (barrel type) 200x10 mm Oxidised mild steel tower bolt (barrel type) 150x10 mm Oxidised mild steel tower bolt (barrel type) 100x10 mm Oxidised mild steel handles 125 mm Oxidised mild steel handles 100 mm Oxidised mild steel handles75 mm Oxidised mild steel hasps and staples(safety type) 150 mm Oxidised mild steel hasps and staples(safety type) 115 mm Oxidised mild steel hasps and staples(safety type)90 mm Oxidised mild steel screws 50 mm Oxidised mild steel screws 40 mm Oxidised mild steel screws 30 mm Oxidised mild steel screws 25 mm Oxidised mild steel screws 20 mm Anodised Aluminium butt hinges 125x75x4 mm Anodised Aluminium butt hinges 125x63x4 mm Anodised Aluminium butt hinges 100x75x4 mm
Unit 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos each each each each each each metre each each each each each each each each each each each 10 Nos 10 Nos 10 Nos 100 Nos 100 Nos 100 Nos 100 Nos 100 Nos 10 Nos 10 Nos 10 Nos
Rate Rs. 27.00 255.00 205.00 165.00 122.00 71.00 66.00 51.00 73.00 63.00 47.00 24.00 45.00 37.00 25.00 25.00 25.00 21.00 17.00 12.00 7.00 5.00 3.00 79.00 70.00 52.00 40.00 35.00 24.00 16.00 15.00 478.00 447.00 416.00
10
Code No 0690 0691 0692 0693 0694 0696 0697 0698 0699 0700 0701 0702 0703 0704 0705 0706 0713 0714 0715 0717 0718 0719 0752 0753 0754 0755 0757
Description Anodised Aluminium butt hinges 100x63x3.2 mm Anodised Aluminium butt hinges 100x63x4 mm Anodised Aluminium butt hinges 75x63x4 mm Anodised Aluminium butt hinges 75x63x3.2 mm Anodised Aluminium butt hinges 75x45x3.2 mm Anodised Aluminium sliding door bolt 300x16 mm Anodised Aluminium sliding door bolt 250x16 mm Anodised Aluminium tower bolt (barrel type)300x10 mm Anodised Aluminium tower bolt (barrel type)250x10 mm Anodised Aluminium tower bolt (barrel type)200x10 mm Anodised Aluminium tower bolt (barrel type)150x10 mm Anodised Aluminium tower bolt (barrel type)100x10 mm Anodised Aluminium handles 125 mm with plate 175 x 32 mm Anodised Aluminium handles 100 mm with plate 150 x 32 mm Anodised Aluminium handles 75mm with plate 125 x 32 mm Anodised Aluminium kicking plate 50 cm long100x3.15 mm Block board construction flush door with teak wood ply on both faces 35 mm thick Block board construction flush door with teak wood ply on both faces 30 mm thick Block board construction flush door with teak wood ply on both faces 25 mm thick Block board construction flush door with commercial ply on both faces 35 mm thick Block board construction flush door with commercial ply on both faces 30 mm thick Block board construction flush door with commercial ply on both faces 25 mm thick Block board construction flush door lipping Square vision panel in Block board construction flush door Circular vision panel in Block board construction flush door Decorative type Louvers in Block board construction flush door Rebate cutting in Block board construction flush door
Unit 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos each each 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos each sqm sqm sqm sqm sqm sqm sqm of door area sqm of door area Sqm of door area sqm of door area sqm of door area
Rate Rs. 390.00 354.00 281.00 215.00 98.00 125.00 104.00 520.00 440.00 354.00 281.00 208.00 375.00 260.00 208.00 94.00 1,100.00 1,050.00 1,000.00 632.00 610.00 600.00 245.00 86.00 118.00 210.00 57.00
11
Code No 0759 0761 0763 0765 0768 0769 0770 0771 0773 0775 0776 0777 0784 0785 0788 0810 0811 0815 0816 0818 0820 0821 0823 0826 0827 0828 0829 0830 0831 0833 0834 0835 0845 0850
Description Decorative plywood 4 mm Fuel wood Glue Hessian cloth Cement Concrete Jali 50 mm thick Cement Concrete Jali 40 mm thick Cement Concrete Jali 25 mm thick Kerosene oil Unslaked lime Dehradun white lime Satna lime Dry hydrated lime (factory made) Marble dust/ powder Marble chips up to 4mm and downsize White & black Marble chips large size above 4 mm White & black Moorum Mud (dry) Dry distemper Oil bound washable distemper/ Acrylic distemper Linseed oil (double boiled) Cement primer Distemper primer Pink primer (for wood) Aluminium paint Acid proof paint (chocolate or black) Anticorrosive bituminous paint (black) Black Japan Enamel paint Floor enamel paint in all shades except green Synthetic enamel paint in black or chocolate shade Synthetic enamel paint in all shades except black or chocolate shade Plastic emulsion paint Roofing paint for iron sheets in red colour White lead
Unit sqm quintal kilogram sqm sqm sqm sqm litre quintal quintal quintal quintal cum quintal quintal cum cum kilogram kilogram litre litre litre litre litre litre litre litre litre litre litre litre litre litre kilogram
Rate Rs. 250.00 265.00 50.00 10.00 145.00 115.00 92.00 19.00 260.00 295.00 178.00 177.00 800.00 115.00 115.00 310.00 20.00 26.00 40.00 80.00 70.00 73.00 72.00 89.00 93.00 52.00 65.00 115.00 100.00 115.00 120.00 140.00 95.00 60.00
12
Code No 0851 0855 0856 0857 0858 0859 0863 0865 0868 0869 0870 0873 0874 0875 0876 0886 0966 0967 0969 0973 0974 0975 0976 0977
Description Water proofing cement paint Wax polish (ready made) Ordinary varnish Superior copal varnish Superior spar varnish Oil type wood preservative Putty for wood work Pig lead Premixed super white gypsum plaster. Plaster of Paris Plug Copper pins 6 mm dia 7.5 cm long Black colour dark shade pigment Red, chocolate, orange, buff or yellow (red oxide of iron) light shade pigment Green or blue medium shade pigment Standard holder bat clamps for sand cast iron or cast iron pipes 150 mm dia Sand Cast iron plain shoe 150 mm dia Copper plate Pulley 25 mm dia Rolling shutter made of 80x1.25 mm machine rolled laths Top cover for rolling shutters 27.5 cm long wire spring grade no 2 for rolling shutters Ball bearing for rolling shutters Extra for mechanical devices chain and cranked operation for operating rolling shutters : exceeding 10.00 sq.m and up to 16.80 sq.m area of door Extra for mechanical devices chain and cranked operation for operating rolling shutters : exceeding 16.80 sq.m area of door Royalty for good earth Royalty for sludge Coarse sand (zone III) Fine sand (zone IV) Galvanised steel plain sheets Standard quality hard board sheet 3 mm thick
Unit kilogram kilogram litre litre litre litre kilogram kilogram kg kilogram each each kilogram kilogram kilogram each each kilogram each sqm metre each each
Rate Rs. 36.00 150.00 49.00 100.00 105.00 60.00 24.00 58.00 5.20 2.50 6.00 7.50 42.00 65.00 45.00 20.00 222.00 195.00 18.00 767.00 400.00 170.00 280.00
sqm sqm cum cum cum cum quintal sqm
400.00 450.00 11.00 60.00 600.00 320.00 3,450.00 103.00
0978 0979 0980 0982 0983 0992 0994
13
Code No 0996 0999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1013 1015 1019 1020 1021 1022 1023 1024 1025 1028 1029 1030 1031 1032 1034 1035 1036 1143 1145
Description Standard quality hard board sheet 4.5 mm thick Shellac Spirit Spun yarn Mild steel round bar 12 mm dia and below Mild steel round bar above 12 mm dia Average rate of Mild steel round bars for reinforcements Twisted steel / deformed bars Mild steel square bars Structural steel such as tees, angles channels and R.S. joists Flats up to 10 mm in thickness Flats exceeding 10 mm in thickness Mild steel plates Mild steel sheets for tanks Mild steel expanded metal 20x60 mm strands Mild steel hooks Mild steel rivets Hard drawn steel wire fabric Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots Galvanised steel J or L hooks 8 mm dia Galvanised steel bolts & nuts 10 mm dia and 125 mm long round head with slots Mild stel bolts 6 mm dia and 25 mm long with hexagonal head Straining bolts Galvanised steel barbed wire Galvanised steel turn buckles Galvanised steel bolts & nuts 10 mm dia and 27 cm long both sides threaded with 4 galvanised steel nuts Galvanised steel bolts 10 mm dia and 7 cm long with nuts Bolts and nuts up to 300 mm in length Bolts and nuts above 300 mm in length Iron pintels including welded pin Steel beading Aluminium Plain Strip edging 38x12x3 mm
Unit sqm kilogram litre kilogram quintal quintal quintal quintal quintal quintal quintal quintal quintal quintal sqm each quintal sqm 10 Nos 10 Nos each 10 Nos each quintal each each each quintal quintal each metre metre
Rate Rs. 120.00 192.00 37.00 30.00 3,100.00 3,050.00 3,075.00 3,175.00 3,175.00 3,100.00 2,900.00 2,875.00 3,400.00 3,475.00 200.00 22.00 3,500.00 310.00 9.00 58.00 7.00 18.00 50.00 4,400.00 9.00 13.00 9.00 4,300.00 4,300.00 28.00 15.00 78.00
14
Code No 1149 1151 1154 1157 1158 1159 1160 1161 1163 1164 1165 1166 1168 1169 1174 1175 1177 1179 1186 1187 1188 1189 1190 1194 1196 1197 1198 1199 1201 1202 1203 1207 1208 1209
Description Glass strip 4 mm thick40 mm deep Boundary stone top chisel dressed 15x15x90 cm Through and bond stone Stone for masonry work Stone for pitching 15 cm x 22.5 cm Stone dust Red sand stone block White sand stone block White sand stone slab 75 mm thick (un-dressed) Red sand stone slab 40 mm thick (un-dressed) White sand stone slab 40 mm thick (un-dressed) Red sand stone slab 30 mm thick (un-dressed) Kota stone slab 20 mm to 25 mm thick (semi-polished) Kota stone slab 25mm thick (rough chiseled) Red sand stone slab 45 mm and 50 mm thick (un-dressed) White sand stone slab 45 mm and 50 mm thick (un-dressed) Stone grit 6 mm and down size or pea sized gravel Crushed stone 2.36 mm to 12.5 mm size Superior class teak wood such as Dandeli, Balarshah or Malabar in planks First class teak wood in scantling First class teak wood in planks Second class teak wood in scantling Second class teak wood in planks Second class deodar wood in planks First class kail wood in planks Second class kail wood in scantling Second class kail wood in planks Sal wood in scantling Precast terrazzo tiles 22 mm thick (light shade) Precast terrazzo tiles 22 mm thick(medium shade) Precast terrazzo tiles 22 mm thick (dark shade) G.I. Limpet washer Bitumen washer G.I. plain washer thick
Unit metre each 100 Nos cum cum cum 10 cudm 10 cudm sqm sqm sqm sqm sqm Sq.m. sqm sqm cum cum 10 cudm 10 cudm 10 cudm 10 cudm 10 cudm 10 cudm 10 cudm 10 cudm 10 cudm 10 cudm sqm sqm sqm 100 Nos 100 Nos 100 Nos
Rate Rs. 6.00 46.00 970.00 332.00 332.00 700.00 45.00 50.00 256.00 120.00 140.00 97.00 239.00 150.00 145.00 160.00 717.00 675.00 895.00 492.00 506.00 394.00 410.00 335.00 186.00 160.00 178.00 218.00 198.00 175.00 170.00 20.00 18.00 27.00
15
Code No 1210 1211 1213 1214 1215 1216 1219 1220 1221 1222 1224 1225 1227 1228 1229 1231 1234 1235 1237 1238 1241 1301 1304 1305 1307 1309 1314 1315 1330 1331 1332 1334 1335 1336
Description G.I. plain washer thin G.I. plain washer for seam bolts Water proofing materials Welding by gas plant Welding by electric plant Whiting Wire nails Wire mesh (rabbit) 20 mm dia holding down bolts Mild steel sheets with bolts and nuts to rest on pintels Hard drawn steel wire Mild steel flat strap fitting Chequered terrazzo tiles 22 mm thick(light shade) Chequered terrazzo tiles 22 mm thick(medium shade) Chequered terrazzo tiles 22 mm thick (dark shade) Extra for selected planks of second class teakwood Aluminium Plain Strip edging 57x12x3 mm Diesel oil Cutting marble or sand stone slab up to 50 mm thick by mechanical device Extra for selected planks of first class teakwood Commercial LPG in cylinder. Bleaching powder Surface box for stop cock Surface box for sluice valve Surface box for water meter C.I. bracket for wash basin and sinks C.P.brass chain with 32 mm dia rubber plug C.P.brass chain with 40 mm dia rubber plug Clamps and M.S. stays including bolts and nuts for 100 mm pipe M.S.Holder bat clamp of approved design for 100 mm S.C.I. pipe M.S.Holder bat clamp of approved design for75 mm S.C.I. pipe Clamps and M.S. stays including bolts and nuts for 50 mm pipe Clamps and M.S. stays including bolts and nuts for 75 mm pipe Clearing eye with chain and lid 100 mm dia
Unit 100 Nos 100 Nos kilogram cm cm quintal kilogram sqm quintal each quintal quintal sqm sqm sqm 10 cudm metre litre metre 10 cudm kg quintal each each each pair each each each each each each each each
Rate Rs. 20.00 21.00 20.00 1.00 1.00 329.00 40.00 38.00 3,800.00 75.00 3,100.00 2,900.00 230.00 200.00 170.00 72.00 105.00 30.25 6.00 80.00 35.00 1,550.00 72.00 140.00 185.00 48.00 21.00 22.00 28.00 13.00 11.00 20.00 25.00 37.00
16
Code No 1337 1339 1340 1342 1343 1350 1352 1353 1354 1355 1356 1357 1360 1361 1362 1363 1364 1366 1367 1369 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1392 1396
Description Clearing eye with chain and lid 150 mm dia Brass bib-cock 15 mm dia Brass bib-cock 20 mm dia Brass stop-cock 15 mm dia Brass stop-cock 20 mm dia Mosquito proof coupling of approved design C.I. cover and frame 300x300 mm inside C.I.cover without frame 300x300mm inside i/c cover of 4.50 kg Rectangular cover 455x610 mm with frame (low duty) Rectangular cover 455x610mm without frame (low duty) 500 mm dia cover with frame (medium duty) 500 mm dia cover without frame (medium duty) C.I.mouth, brass ferrule 15 mm dia C.I.mouth, brass ferrule 20 mm dia C.I.mouth, brass ferrule 25 mm dia Vitreous china foot rests 250x130x30 mm C.I. grating 100x100 mm C.I. grating 150x150 mm C.I. grating 180x180 mm S.C.I. gully or nahani grating 100 mm dia Rubber insertions for80 mm dia pipe joints Rubber insertions for 100 mm dia pipe joints Rubber insertions for 125 mm dia pipe joints Rubber insertions for 150 mm dia pipe joints Rubber insertions for 200 mm dia pipe joints Rubber insertions for 250 mm dia pipe joints Rubber insertions for 300 mm dia pipe joints Rubber insertions for 350 mm dia pipe joints Rubber insertions for 400 mm dia pipe joints Rubber insertions for 450 mm dia pipe joints Rubber insertions for 500 mm dia pipe joints Rubber insertions for 600 mm dia pipe joints Mirror of superior make glass 60x45 cm Vitreous china pedestal for wash basin
Unit each each each each each each each each each each each each each each each pair each each each each each each each each each each each each each each each each each each
Rate Rs. 41.00 157.00 193.00 157.00 193.00 23.00 265.00 170.00 1,395.00 844.00 4,257.00 2,129.00 80.00 114.00 156.00 79.00 10.00 19.00 23.00 10.00 9.00 12.00 13.00 15.00 20.00 30.00 38.00 45.00 66.00 83.00 106.00 118.00 249.00 527.00
17
Code No 1397 1464 1466 1468 1470 1472 1532 1533 1534 1535 1540 1541 1542 1543 1545 1546 1547 1548 1549 1550 1551 1552 1555 1559 1608 1612 1614 1616 1617 1618
Description Pig lead S & S.C.I.standard specials up to 300 mm dia (heavy class) S & S.C.I.standard specials over 300 mm dia (heavy class) Flanged C.I. standard specials up to 300 mm dia(heavy class) Flanged C.I. standard specials over 300 mm dia(heavy class) Casing pipe 100 mm dia Flush pipe with union spreaders and clamps all in C.P. brass for single stall Flush pipe with union spreaders and clamps all in C.P. brass for double stall Flush pipe with union spreaders and clamps all in C.P. brass for range of three stall Flush pipe with union spreaders and clamps all in C.P. brass for range of four stall Flush pipe and spreaders G.I.for single set of one squatting plate urinal Flush pipe and spreaders G.I.for range of two squatting plates urinal Flush pipe and spreaders G.I.for range of three squatting plates urinal Flush pipe and spreaders G.I.for range of four squatting plates urinal G.I. pipes 15 mm dia G.I. pipes 20 mm dia G.I. pipes 25 mm dia G.I. pipes 32 mm dia G.I. pipes 40 mm dia G.I. pipes 50 mm dia G.I. pipes 65 mm dia G.I. pipes 80 mm dia G.I. back (jam) nuts25 mm dia G.I. back (jam) nuts65 mm dia G.I. tees (equal) 25 mm G.I. tees (equal) 65 mm G.I. inlet connection S.C.I. soil, waste and vent single socketed pipe1.80 metres long:75mm dia S.C.I. soil, waste and vent single socketed pipe1.80 metres long: 100mm dia S.C.I. soil, waste and vent single socketed pipe1.80 metres long:
Unit kilogram quintal quintal quintal quintal metre each each each each each each each each metre metre metre metre metre metre metre metre each each each each each each each each
Rate Rs. 58.00 2,400.00 2,595.00 4,320.00 4,772.00 292.00 204.00 333.00 415.00 465.00 138.00 203.00 255.00 320.00 58.00 77.00 109.00 140.00 160.00 211.00 269.00 355.00 5.00 15.00 38.00 215.00 50.00 537.00 610.00 1,205.00
18
Code No
Description 150mm dia
Unit
Rate Rs.
1620 1621 1622 1624 1625 1627 1628 1630 1631 1633 1634 1636 1637 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1653 1656 1659 1662 1666
S.C.I. plain bend75mm dia S.C.I. plain bend 100mm dia S.C.I. plain bend 150mm dia S.C.I. bend with access door 75mm dia S.C.I. bend with access door 100mm dia S.C.I. plain single equal junctions75x75x75 mm dia S.C.I. plain single equal junctions100x100x100 mm dia S.C.I. single equal junctions75x75x75 mm dia with access door. S.C.I. single equal junctions 100x100x100 mm dia with access door. S.C.I. plain double equal junctions 75x75x75x75 mm dia S.C.I. plain double equal junctions100x100x100x100 mm dia S.C.I. double equal junctions75x75x75x75 mm dia with access door. S.C.I. double equal junctions 100x100x100x100 mm dia with access door. Slotted cowl (terminal guard )75 mm dia Slotted cowl (terminal guard ) 100 mm dia G.I. Union 15 mm nominal bore G.I. Union 20 mm nominal bore G.I. Union 25 mm nominal bore G.I. Union 32 mm nominal bore G.I. Union 40 mm nominal bore G.I. Union 50 mm nominal bore G.I. Union 65 mm nominal bore G.I. Union 80mm nominal bore Polyethylene water storage tank with cover and suitable locking arrangement Sand cast iron S&S plain single unequal junctions : 100x100x75 mm dia Sand cast iron S&S single unequal junctions: 100x100x75 mm dia with access door. Sand cast iron S&S plain double unequal junctions : 100x100x75x75 mm dia Sand cast iron S&S double unequal junctions: 100x100x75x75 mm dia with access door. Sand cast iron heel rest bend75mm dia
each each each each each each each each each each each each each each each each each each each each each each each per litre each each each each each
140.00 178.00 407.00 161.00 194.00 205.00 265.00 224.00 297.00 296.00 394.00 333.00 417.00 109.00 152.00 32.00 50.00 59.00 73.00 108.00 158.00 324.00 392.00 4.00 288.00 321.00 423.00 453.00 165.00
19
Code No 1667 1669 1670 1672 1673 1674 1677 1682 1683 1685 1686 1687 1688 1689 1690 1693 1700 1701 1702 1703 1704 1705 1706 1707 1709 1710 1711 1712
Description Sand cast iron heel rest bend 100mm dia S.C.I. single equal invert branch of required degree75x75x75 mm dia S.C.I. single equal invert branch of required degree 100x100x100 mm dia S.C.I. double equal invert branch of required degree 75x75x75x75 mm dia S.C.I. double equal invert 100x100x100x100 mm dia branch of required degree
Unit
Rate Rs. 197.00 239.00 321.00 314.00 422.00 382.00 458.00 211.00 291.00 82.00 110.00 18.00 25.00 25.00 35.00 450.00 118.00 135.00 157.00 228.00 333.00 398.00 642.00 719.00 836.00 986.00 1,243.00 1,500.00
each each each each each each each each each each each each each each each each metre metre metre metre metre metre metre metre metre metre metre metre
S.C.I. single unequal invert branch of required degree100x100x75 mm dia S.C.I. double unequal 100x100x75x75 mm dia invert branch of required degree
S.C.I. door pieces 75 mm dia S.C.I. door pieces 100 mm dia S.C.I. collar 75 mm dia S.C.I. collar 100 mm dia Unplasticised P.V.C. connection pipe with brass union 30 cm long 15 mm bore Unplasticised P.V.C. connection pipe with brass union 30 cm long 20 mm bore Unplasticised P.V.C. connection pipe with brass union 45 cm long 15 mm bore Unplasticised P.V.C. connection pipe with brass union 45 cm long 20 mm bore S.C.I. hand pump R.C.C. pipes NP2 class 100 mm dia R.C.C. pipes NP2 class 150 mm dia R.C.C. pipes NP2 class 250 mm dia R.C.C. pipes NP2 class 300 mm dia R.C.C. pipes NP2 class 450 mm dia R.C.C. pipes NP2 class 500 mm dia R.C.C. pipes NP2 class 600 mm dia R.C.C. pipes NP2 class 700 mm dia R.C.C. pipes NP2 class 800 mm dia R.C.C. pipes NP2 class 900 mm dia R.C.C. pipes NP2 class 1000 mm dia R.C.C. pipes NP2 class 1100 mm dia
20
Code No 1713 1714 1715 1716 1717 1718 1719 1720 1721 1723 1724 1725 1726 1727 1854 1855 1856 1857 1858 1859 1863 1871 1872 1875 1876 1878 1879 1881 1882 1885 1889 1891 1893
Description R.C.C. pipes NP2 class 1200 mm dia R.C.C. collarsNP2 class 100 mm dia R.C.C. collarsNP2 class 150 mm dia R.C.C. collarsNP2 class 250 mm dia R.C.C. collarsNP2 class 300 mm dia R.C.C. collarsNP2 class 450 mm dia R.C.C. collarsNP2 class 500 mm dia R.C.C. collarsNP2 class 600 mm dia R.C.C. collarsNP2 class 700 mm dia R.C.C. collarsNP2 class 800 mm dia R.C.C. collarsNP2 class 900 mm dia R.C.C. collarsNP2 class 1000 mm dia R.C.C. collarsNP2 class 1100 mm dia R.C.C. collarsNP2 class 1200 mm dia Stoneware pipes grade A (60 cm long) 100 mm dia Stoneware pipes grade A (60 cm long) 150 mm dia Stoneware pipes grade A (60 cm long) 200 mm dia Stoneware pipes grade A (60 cm long) 230 mm dia Stoneware pipes grade A (60 cm long) 250 mm dia Stoneware pipes grade A (60 cm long) 300 mm dia Fire clay kitchen sink: 600x450x250 mm White vitreous china laboratory sink450x300x150 mm White vitreous china laboratory sink600x450x200 mm White plastic seat (solid)with lid C.P.brass hinges and rubber buffers Black plastic seat (solid) with lid C.P.brass hinges and rubber buffers Shower rose C.P.brass for 15 to 20 mm inlet 100 mm dia Shower rose C.P.brass for 15 to 20 mm inlet 150 mm dia Spun yarn Strainer brass 40 mm dia 1.5 metre long 15 mm C.P.brass tap C.P.brass toilet paper holder of standard size C.I. trap for standard urinal with vent arm with operating and other couplings in C.P.brass: 50 mm dia C.I. trap for standard urinal with vent arm with operating and other couplings in C.P.brass: 80 mm dia
Unit metre each each each each each each each each each each each each each each each each each each each each each each each each each each kilogram each each each each each
Rate Rs. 1,543.00 16.00 21.00 34.00 42.00 63.00 73.00 92.00 102.00 146.00 178.00 210.00 241.00 280.00 30.00 42.00 80.00 85.00 113.00 165.00 1,192.00 664.00 1,400.00 275.00 250.00 28.00 40.00 30.00 405.00 103.00 70.00 125.00 158.00
21
Code No 1895 1896 1897 1898 1900 1902 1904 1913 1915 1922 1923 1924 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1940 1941 1942 1943 1944 1945 1947 1949 1950 1951
Description C.P.brass trap40 mm dia 100 mm S.C.I. trap with vent heel 100 mm S.C.I. trap with 100 mm inlet and 100 mm outlet 100 mm S.C.I. trap with 100 mm inlet and75 mm outlet S.W. gully trap P type 100x100 mm S.W. gully trap P type 150x100 mm S.W. gully trap P type 180x150 mm Vitreous china lipped front urinal Vitreous china squatting plate urinal H.P. or L.P. ball valve with polythene floats: 15 mm dia H.P. or L.P. ball valve with polythene floats: 20 mm dia H.P. or L.P. ball valve with polythene floats: 25 mm dia Brass full way valve with C.I. wheel (screwed end) 25 mm dia Brass full way valve with C.I. wheel (screwed end) 32 mm dia Brass full way valve with C.I. wheel (screwed end) 40 mm dia Brass full way valve with C.I. wheel (screwed end) 50 mm dia Brass full way valve with C.I. wheel (screwed end) 65 mm dia Brass full way valve with C.I. wheel (screwed end) 80 mm dia Gunmetal non-return valve-horizontal (screwed end) 25 mm dia Gunmetal non-return valve-horizontal (screwed end) 32 mm dia Gunmetal non-return valve-horizontal (screwed end) 40 mm dia Gunmetal non-return valve-horizontal (screwed end) 50 mm dia Gunmetal non-return valve-horizontal (screwed end) 65 mm dia Gunmetal non-return valve-horizontal (screwed end) 80 mm dia C.I.sluice valve (with caps) class I : 100 mm dia C.I.sluice valve (with caps) class I : 125 mm dia C.I.sluice valve (with caps) class I : 150 mm dia C.I.sluice valve (with caps) class I : 200 mm dia C.I.sluice valve (with caps) class I : 250 mm dia C.I.sluice valve (with caps) class I : 300 mm dia Vitreous china flat back wash basin 630x450 mm Vitreous china angle back wash basin 600x480 mm Vitreous china angle back wash basin 400x400 mm C.P. brass waste 32 mm
Unit each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each
Rate Rs. 99.00 260.00 221.00 164.00 55.00 86.00 160.00 380.00 610.00 175.00 260.00 300.00 235.00 296.00 330.00 483.00 700.00 1,160.00 238.00 305.00 410.00 618.00 1,085.00 1,540.00 1,890.00 2,365.00 2,840.00 5,405.00 8,050.00 9,920.00 585.00 540.00 347.00 48.00
22
Code No 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965
Description C.P. brass waste 40 mm Vitreous china Indian type w.c. pan size 580 mm Vitreous china orrisa type w.c. pan size 580 mm Vitreous china pedestal type water closet Bolts and nuts 16 mm dia 60 mm long Bolts and nuts 16 mm dia 65 mm long Bolts and nuts 20 mm dia 65 mm long Bolts and nuts 20 mm dia 70 mm long Bolts and nuts 20 mm dia 75 mm long Bolts and nuts 20 mm dia 80 mm long Bolts and nuts 24 mm dia 85 mm long Bolts and nuts 24 mm dia 90 mm long Bolts and nuts 27 mm dia 100 mm long White vitreous china dual purpose closet (Anglo Indian W.C.) suitable for use as squatting pan or European type water closet as per manufacturer's specifications Vitreous china foot rests 250x125x25 mm Fly ash F.P.S. bricks tile class designation 100 Modular bricks class designation75 Strips-Aluminium fluted 3.15mm thick and 150mm wide Strips Aluminium fluted 3.15mm thick and 200mm wide metre Float glass sheet of nominal thickness 4 mm (weight not less than 10kg/sqm). Float glass sheet of nominal thickness 5.5 mm.(weight not less than 13.50 kg/sqm). Ply wood 5 ply with commercial ply on both faces 6 mm thick Hollock ballies 125 mm diameter Oxidised mild steel pull bolt lock (locking bolt) of size 85 mm x 42 mm with screws, bolts, nuts and washers complete Brass cupboard lock 6 levers (best make of approved quality) 40 mm size Brass cupboard lock 6 levers (best make of approved quality) 50 mm size Brass cupboard lock 6 levers (best make of approved quality) 65 mm size Brass cupboard lock 6 levers (best make of approved quality) 75 mm
Unit each each each each each each each each each each each each each
Rate Rs. 53.00 290.00 700.00 554.00 8.00 8.00 12.00 12.00 12.00 13.00 24.00 26.00 30.00
each pair cum 1000 Nos 1000 Nos metre Metre sqm sqm sqm metre each each each each each
796.00 80.00 6.00 1,950.00 2,700.00 216.00 288.00 248.00 340.00 282.00 27.00 27.00 36.00 43.00 55.00 70.00
1970 1980 1984 1986 2391 2392 2406 2407 2412 2447 2449 2451 2452 2453 2454
23
Code No
Description size
Unit
Rate Rs.
2455 2456 2459 2464 2465 2466 2467 2468 2469 2470 2471 2480 2481 2483 2500 2504 2505 2602 2603 2704 2710 2750 2751 2901 2902 2903 2904 2908 2909
Brass hanging type door stopper 150 mm Hydraulic door closer bottle type M.S. body with necessary accessories and screws complete Anodised Aluminium hanging type door stopper Anodised Aluminium pull bolt lock (locking bolt) of size 85 mmx42 mm with screws, bolts ,nuts and washers complete Anodised Aluminium Casement stay 250 mm Hollock wood in scantling Chromium plated Brass pull bolt lock (locking bolt) of size 85 mmx42 mm with screws, bolts, nuts and washers complete Nickeled Chromium Brass cupboard lock 40 mm size Nickeled Chromium Brass cupboard lock 50 mm size Nickeled Chromium Brass cupboard lock 65 mm size Nickeled Chromium Brass cupboard lock 75 mm size Ply wood 5 ply with teak ply on both faces 9 mm thick Ply wood 5 ply with teak ply on one face and commercial ply on another face 9 mm thick Ply wood 7 ply with teak ply on one face and commercial ply on another face 9 mm thick Extra for selected planks of second class deodar wood Kiln seasoning of timber Hollock wood in planks F.P.S. bricks class designation75 F.P.S. bricks class designation50 Aluminium Strip 40 mm wide and 2 mm thick White marble makrana second quality plain veined stone pieces for crazy flooring 8 mm thick granite stone tiles (mirror polished of all shades) 8 mm thick marble tiles (polished) Raj Nagar Stone Aggregate (Single size) : 100 mm nominal size Stone Aggregate (Single size) : 80 mm nominal size Stone chippings/ screenings 4.75 mm nominal size Stone chippings/ screenings 150 micron nominal size Over burnt (Jhama) Brick Aggregate: 120 mm to 40 mm size Over burnt (Jhama) Brick Aggregate: 90 mm to 40 mm size
each each each each each 10 cudm each each each each each sqm sqm sqm 10 cudm cum 10 cudm 1000 Nos 1000 Nos kilogram quintal sqm sqm cum cum cum cum cum cum
46.00 506.00 14.00 34.00 36.00 217.00 130.00 38.00 53.00 64.00 75.00 693.00 550.00 585.00 59.00 539.00 230.00 1,900.00 1,700.00 195.00 105.00 555.00 294.00 575.00 575.00 800.00 800.00 285.00 320.00
24
Code No 2910 2911 2914 2916 3002 3004 3050 3080 3084 3088 3092 3096 3213 3228 3229 3300 3311 3314 3317 3320 3321 3326 3617 3620 3621 3624 3625 3628 3629 3634 3635 3640
Description Stone chippings/ screenings 12.5/ 13.2 mm nominal size Stone chippings/ screenings 10/ 11.2 mm nominal size Solvent Paving Asphalt 80/100 penetration Polyvinyl chloride sheet 400 micron thick Stone ware spouts 100 mm dia 60 cm long Galvanised steel corrugated sheets Gunmetal non-return valve-horizontal (screwed end) 25 mm dia Gunmetal non-return valve-horizontal (screwed end) 32 mm dia Gunmetal non-return valve-horizontal (screwed end) 40 mm dia Gunmetal non-return valve-horizontal (screwed end) 50 mm dia Gunmetal non-return valve-horizontal (screwed end) 65 mm dia Vitreous china Surgeon type wash basin of size 660x460 mm 600x120 mm glass shelf with anodised aluminium angle frame, C.P. brass brackets and guard rail of standard size Vitreous china flat back wash basin 550x400 mm Gunmetal non-return valve-horizontal (screwed end) 80 mm dia C.I.sluice valve (with caps) class II : 100 mm dia C.I.sluice valve (with caps) class II : 125 mm dia C.I.sluice valve (with caps) class II : 150 mm dia C.I.sluice valve (with caps) class II : 200 mm dia C.I.sluice valve (with caps) class II : 250 mm dia C.I.sluice valve (with caps) class II : 300 mm dia CP Brass Union 40 mm dia C.C.I.(spun) socketed soil, waste and vent pipe 1.80 metres long:100mm dia C.C.I.(spun) socketed soil, waste and vent pipe 1.80 metres long:75mm dia S.C.I. S&S bends with access door100mm dia S.C.I. S&S bends with access door75mm dia S.C.I. S&S bend100mm dia S.C.I. S&S bend75mm dia S.C.I. S&S heel rest sanitary bend 100mm dia S.C.I. S&S heel rest sanitary bend 75mm dia S.C.I. S&S single equal junctions100x100x100 mm
Unit cum cum kilogram tonne sqm each quintal each each each each each each each each each each each each each each each each each each each each each each each each each
Rate Rs. 700.00 700.00 18.00 22,500.00 26.00 28.00 3,650.00 260.00 385.00 505.00 712.00 1,245.00 810.00 95.00 450.00 2,038.00 1,950.00 2,465.00 3,000.00 5,800.00 8,200.00 10,250.00 130.00 978.00 846.00 225.00 179.00 190.00 143.00 233.00 204.00 367.00
25
Code No 3641 3644 3645 3650 3651 3654 3655 3660 3664 3670 3674 3681 3682 3685 3686 3690 3695 3699 3707 3708 3712 3713 3716 3717 3728 3729 3733 3734
Description S.C.I. S&S single equal junctions75x75x75 mm S.C.I. S&S single equal junctions with access door 100x100x100 mm S.C.I. S&S single equal junctions with access door 75x75x75 mm S.C.I. S&S double equal junctions100x100x100x100 mm S.C.I. S&S double equal junctions75x75x75x75 mm S.C.I. S&S double 100x100x100x100 mm. equal junctions with access door
Unit each each each each each each each each each each door each invert branch of required degree each each each each each invert branch of required each each each each each each each each each each each each
Rate Rs. 276.00 396.00 294.00 467.00 373.00 502.00 400.00 461.00 523.00 639.00 700.00 325.00 247.00 414.00 334.00 422.00 574.00 179.00 223.00 306.00 220.00 289.00 275.00 361.00 230.00 176.00 154.00 142.00
S.C.I. S&S double equal junctions with access door 75x75x75x75 mm. S.C.I. S&S single unequal junctions100x100x75 mm S.C.I. S&S single unequal junctions with access door 100x100x75 mm S.C.I. S&S double unequal junctions100x100x75x75 mm S.C.I. S&S double 100x100x75x75 mm unequal junctions with access
S.C.I. S&S single equal 100x100x100 mm dia
S.C.I. S&S single equal invert branch of required degree 75x75x75 mm dia S.C.I. S&S double equal degree100x100x100x100 mm dia invert branch of required
S.C.I. S&S double equal invert branch of required degree 75x75x75x75 mm dia S.C.I. S&S single unequal degree100x100x75 mm dia S.C.I. S&S double unequal degree100x100x75x75 mm dia invert branch of required
S.C.I. S&S, 75 mm offset for75 mm dia pipe S.C.I. S&S, 150 mm offset for75 mm dia pipe S.C.I. S&S, 150 mm offset for100 mm dia pipe S.C.I. S&S, 114 mm offset for75 mm dia pipe S.C.I. S&S, 114 mm offset for100 mm dia pipe S.C.I. S&S, 152 mm offset for75 mm dia pipe S.C.I. S&S, 152 mm offset for100 mm dia pipe S.C.I. S&S door pieces 100 mm dia S.C.I. S&S door pieces 75 mm dia S.C.I. S&S, Slotted Cowl (Terminal Guard) 100 mm S.C.I. S&S, Slotted Cowl (Terminal Guard) 75 mm
26
Code No 3738 3739 3746 3747 3749 3860 3861 4006 4007 4008 4009 4010 4011 4012 4013 4014 4201 4202 4203 4204 4205 4206 4207 5001 6001 6007 6010 6019 6501 7001 7003 7004
Description C.C.I.(spun)S&S, collars 100 mm C.C.I.(spun)S&S, collars 75 mm S.C.I. S&S, 76 mm offset for75 mm dia pipe S.C.I. S&S, 76 mm offset for100 mm dia pipe Vitreous china toilet paper holder of standard size 560 mm dia cover with frame (Heavy duty) 560 mm dia cover without frame (Heavy duty) Pressed steel door frames (mild steel sheet 1.25mm) Profile "B" Pressed steel door frames (mild steel sheet 1.25mm) Profile "C" Pressed steel door frames (mild steel sheet 1.25mm) Profile "E" Mild steel tubes hot finished welded type Mild steel tubes hot finished seamless type Mild steel tubes electric resistant or induction butt welded Circular C.I. Box for ceiling fan Pulley 40 mm dia Ready made steel door with necessary hinges, lugs and glazing clips excluding other fittings & their fixing Aluminium primer Red oxide Zinc chromate primer Copper acetate Hydrochloric acid Copper chloride Copper nitrate Ammonium chloride Mobil oil White marble slab Makrana second quality plain veined 18 mm thick Pink marble slab plain 18mm thick Udaypur green marble slab plain 18mm thick Black Zebra marble slab plain 18mm thick Sand zone V (Jamuna) Brass 100mm mortice latch and lock with6 levers without pair of handles Pair of Anodised Aluminium lever handles for 100mm mortice latch and lock Vitreous china flat back wash basin 450x300 mm
Unit each each each each each each each metre metre metre kilogram kilogram kilogram each each sqm litre litre kilogram kilogram kilogram kilogram kilogram litre sqm sqm sqm sqm cum each each each
Rate Rs. 161.00 115.00 126.00 220.00 89.00 7,634.00 3,664.00 170.00 187.00 214.00 38.00 42.00 53.00 35.00 19.00 1,406.00 63.00 58.00 228.00 27.00 244.00 173.00 12.00 95.00 1,722.00 546.00 580.00 415.00 175.00 150.00 195.00 360.00
27
Code No 7005 7006 7008 7009 7010 7011 7012 7013 7014 7015 7016 7017 7018 7019 7020 7021 7022 7023 7024 7027 7029 7032 7034 7035 7036 7040 7042 7043 7044 7045 7046 7047 7048
Description Vitreous china 10 litres low level cistern without fittings Vitreous china 10 litres low level cistern with fittings F.P.S. clay fly ash bricks class designation 75 Gypsum board Ceiling sections Perimeter channel Intermediate channel Ceiling angle Connecting clips Soffit cleat Joint filler Joint finisher Joint tape roll Dash fastener/Chemical Fastener All drive screws ( for gypsum board) Primer ( for gypsum board) Chlorpyriphos 20% E.C. / Lindane 20% E.C. Chromium plated brackets ( curtain rods) Acid Proof cement M.S. Butt hinges 125x90x4 mm Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia. of wire 0.63 mm Frosted glass sheet of nominal thickness 4 mm (weighing not less than 10 kg/sqm) Nickel plated M.S. pipe 20 mm dia. Nickel plated M.S. Brackets for curtain rod 20 mm Nickel plated M.S. Brackets for curtain rod 25 mm Oxidised mild steel screws 35 mm Mild steel conduit pipe (heavy type) ISI marked-20 mm dia. Mild steel conduit pipe (heavy type) ISI marked-25 mm dia. Rolling shutters of 80x0.90 mm laths Rolling shutters of 80x1.2 mm laths Top cover of Rolling shutters 0.90 mm thick Top cover of Rolling shutters 1.20 mm thick Rawl plug 50 mm (designation 10 no.)
Unit each each 1000 Nos sqm metre metre metre metre each each kilogram kilogram roll each 100 Nos litre litre each tonne 10 Nos sqm sqm metre each each 100 Nos metre metre sqm sqm metre metre each
Rate Rs. 824.00 1,390.00 1,412.00 140.00 36.00 23.00 38.00 16.00 5.00 3.00 19.00 22.00 120.00 8.00 40.00 76.00 150.00 5.00 7,400.00 80.00 142.00 257.00 54.00 3.00 4.00 28.00 44.00 49.00 576.00 615.00 205.00 228.00 7.00
28
Code No 7049 7055 7056 7059 7060 7063 7064 7065 7068 7070 7071 7077 7087 7090 7091 7095 7096 7097 7098 7101 7102 7103 7104 7105 7106 7107
Description Teak wood lipping of size 25x3 mm in pelmets Flat pressed 3 layer and graded particle board (medium density) Grade 1 conforming to IS : 3087 - 18 mm thick Aluminium tee channel (heavy duty) with rollers and stop end Aluminium hanging floor door stopper with twin rubber & stopper Hydraulic door closer tubular type Aluminium section body Oxidised M.S.casement stay (straight peg type) 300 mm not less than 0.33 kg Oxidised M.S.casement stay (straight peg type) 250 mm not less than 0.28 kg Oxidised M.S.casement stay (straight peg type) 200 mm not less than 0.24 kg Extra for providing grilled rolling shutters with 8 mm dia M.S. rod Chequered precast cement concrete tiles 22mm thick using marble chips of size 6mm - light shade using white cement White marble Raj Nagar plain 20 mm thick (slab area 0.10 sqm to 0.20 sqm) Acid and alkali resistant tiles 300x300 mm size, 10 mm thick S.C.I. Tee 150 mm Expanded polystyrene type N- Normal Expanded polystyrene type - SE Stainless steel kitchen sink - with drain board bowl depth 250 mm. Stainless steel kitchen sink - with drain board 510 x 1040mm bowl depth 225 mm. Stainless steel kitchen sink - with drain board 510 x 1040mm bowl depth 200 mm. Stainless steel kitchen sink - with drain board 510x1040mm bowl depth 178 mm Stainless steel kitchen sink - without drain board 610x510mm bowl depth 200 mm Stainless steel kitchen sink - without drain board 610x460mm bowl depth 200 mm. Stainless steel kitchen sink - without drain board 470x420mm bowl depth 178 mm Coloured Orissa pattern W.C. pan 580x440 mm Coloured Pedestal type W.C. pan 580x440 mm (European type) Coloured Vitreous china 10 lit. low level cistern Coloured (other than black) solid P.V.C. seat in European W.C. pan
Unit metre sqm metre each each each each each sqm sqm sqm 10 Nos each sqm sqm each each each each each each each each each each each
Rate Rs. 16.00 301.00 35.00 44.00 765.00 14.00 12.00 11.00 185.00 415.00 415.00 460.00 460.00 108.00 131.00 4,900.00 4,600.00 4,100.00 2,600.00 2,700.00 2,500.00 1,600.00 1,043.00 865.00 1,268.00 380.00
29
Code No 7112 7113 7114 7115 7116 7117 7118 7119 7120 7123 7126 7127 7128 7129 7130 7131 7132 7133 7134 7135 7136 7137
Description Circular shape 450 mm dia Mirror with Plastic moulded frame Rectangular shape 453x357 mm Mirror with Plastic moulded frame Oval shape 450x350 mm (outer dimensions) Mirror with Plastic moulded frame Rectangular shape 1500x450 mm Mirror with Plastic moulded frame Hard board 6 mm thick Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings Semi Rigid PVC waste pipe for sink and wash basin 40 mm dia with length not less than 700 mm i/c PVC waste fittings Flexible (coil shaped) PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings Flexible (coil shaped) PVC waste pipe for sink and wash basin 40 mm dia with length not less than 700 mm i/c PVC waste fittings Coloured High density polyethylene/ poly propylene 10 lit. (full flush) capacity controlled low level flushing cistern with fittings White Vitreous china 10 lit. (full flush) capacity controlled low level flushing cistern with all fittings Coloured Vitreous china 10 lit. (full flush) capacity controlled low level flushing cistern with all fittings S.W. intercepting trap 100 mm dia S.W. intercepting trap 150 mm dia Rectangular shape 600x450 mm precast R.C.C. manhole cover with frame - L.D. - 25 Square shape 350x350 mm precast R.C.C. manhole cover with frame - L.D. - 25 Circular shape 450 mm dia precast R.C.C. manhole cover with frame - L.D. - 25 Rectangular shape 500x500 mm precast R.C.C. manhole cover with frame - M.D. - 10 Circular shape 500 mm dia precast R.C.C. manhole cover with frame - M.D. - 10 Circular shape 560 mm dia precast R.C.C. manhole cover with frame - H.D. - 20 Circular shape 560 mm dia precast R.C.C. manhole cover with frame - E.H.D. - 35 Factory made 35 mm thick shutters with laminated veneer lumber styles rails as per TADS IS:1995 and panels of 12 mm thick plain type-I, medium density flat pressed three layer, graded particle board (FPT-I) as per IS:3087-1985 bonded with BWP type synthetic resin
Unit each each each each sqm each each each each each each each each each each each each each each each each
Rate Rs. 370.00 245.00 280.00 635.00 151.00 16.00 21.00 20.00 22.00 632.00 858.00 1,277.00 144.00 202.00 628.00 540.00 474.00 575.00 575.00 838.00 935.00
sqm
1,500.00
30
Code No
Description adhesive, as per IS:848-1974
Unit
Rate Rs.
7139
Factory made 35 mm thick shutters with laminated veneer lumber styles rails as per TADS IS:1995 and panels of 12 mm thick both sides prelaminated type-I, medium density flat pressed three layer, graded particle board (FPT-I) as per IS:3087-1985 bonded with BWP type synthetic resin adhesive, as per IS:848-1974 Factory made 35 mm thick shutters with laminated veneer lumber styles rails as per TADS IS:1995 and panels of 12 mm thick one side prelaminated type-I, and other side balancing lamination, medium density flat pressed three layer, graded particle board (FPT-I) as per IS:3087-1985 bonded with BWP type synthetic resin adhesive, as per IS:848-1974 Factory made 30 mm thick shutters with laminated veneer lumber styles rails as per TADS IS:1995 and panels of sheet glass using 10 kg/ sqm glass panes Factory made 35 mm thick shutters with laminated veneer lumber styles rails as per TADS IS:1995 and panels of galvanised wire gauge with average width of aperture 1.4 mm on both directions with wire of dia 0.63 mm Factory made 30 mm thick shutters with laminated veneer lumber styles rails as per TADS IS:1995 and panels of galvanised wire gauge with average width of aperture 1.4 mm on both directions with wire of dia 0.63 mm Laminated veneer lumber confirming to TADSS manufactured in factory in frames of doors, windows C.I. pile shoe M.S. clamps for pile shoe Bentonite Oxidised M.S. safety chain (weighing not less than 450 gms) for door C.I. grating 150 mm dia. (Weighing not less than 440 gm) U-PVC pipes (working pressure 4 kg / cm ) Single socketed pipe 75 mm dia. U-PVC pipes (working pressure 4 kg / cm ) Single socketed pipe 110 mm dia. U-PVC pipes (working pressure 4 kg / cm ) Rubber (Seal) Ring 75 mm dia. U-PVC pipes (working pressure 4 kg / cm ) Rubber (Seal) Ring 110 mm dia. UPVC coupler for UPVC drainage pipes 75 mm UPVC coupler for UPVC drainage pipes 110 mm UPVC pushfit coupler (single) 75 mm thick
2 2 2 2
sqm
1,618.00
7143
sqm
1,572.00
7151
sqm
1,290.00
7154
sqm
1,328.00
7155
sqm 10 cudm kilogram kilogram tonne each each metre metre metre metre each each each
1,150.00 540.00 40.00 35.00 2,700.00 43.00 16.00 58.00 112.00 14.00 17.00 30.00 40.00 47.00
7157 7181 7182 7183 7184 7187 7188 7189 7190 7191 7192 7193 7194
IS:1995
31
Code No 7195 7196 7197 7198 7199 7208 7209 7212 7213 7214 7215 7231 7232 7233 7236 7237 7239 7240 7241 7244 7245 7246
Description UPVC pushfit coupler (single) 110 mm thick UPVC single equal Tee (with door) 75x75x75 mm UPVC single equal Tee (with door) 110x110x110 mm UPVC single equal Tee (with door) 75x75x75 mm UPVC single equal Tee (with door) 110x110x110 mm UPVC bend 87.5o 75 mm bend UPVC bend 87.5o 110 mm bend UPVC plain shoe 75 mm bend UPVC plain shoe 110 mm bend UPVC pipe clip 75 mm bend UPVC pipe clip 110 mm bend Resin Bonded Glass wool 16 kg/m 50 mm thick Resin Bonded Glass wool 24 kg/m 50 mm thick Fibre glass tissue reinforcement Type II Grade I Precast chequered cement tiles 22 mm thick Dark shade using ordinary cement Precast chequered cement tiles 22 mm thick medium shade using 50% white cement, 50% ordinary cement Epoxy paint Fire retardant paint Melamine polish Table rubbed polished stone 18 mm thick (75x50cm) Agaria Marble stone - 18 mm thick Table rubbed polished stone 18mm thick (75x50cm) Granite stone 18mm thick Vertical load testing (INITIAL) of piles in accordance with IS : 2911 (Part-IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification and up to 50MT capacity pile. Vertical load testing (INITIAL) of piles in accordance with IS : 2911 (Part-IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & above 50MT and up to 100MT. Vertical load testing (INITIAL) of piles in accordance with IS : 2911 (Part-IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & group of two or more up to 50MT.
Unit each each each each each each each each each each each sqm sqm Sqm Sqm Sqm litre litre litre sqm sqm
Rate Rs. 72.00 83.00 115.00 100.00 160.00 50.00 85.00 105.00 196.00 15.00 30.00 114.00 163.00 55.00 193.00 305.00 280.00 318.00 228.00 1,440.00 1,670.00
per test
19,500.00
7247
per test
27,500.00
7248
per test
37,500.00
32
Code No 7249
Description Cyclic vertical load testing of piles in accordance with IS : 2911 (PartIV) including preparation of pile head etc. for Single pile up to 50 tonne capacity Cyclic vertical load testing of piles in accordance with IS : 2911 (PartIV) including preparation of pile head etc. for Single pile above 50 tonne capacity pile and up to 100 tonne capacity pile Cyclic vertical load testing of piles in accordance with IS : 2911 (PartIV) including preparation of pile head etc. for Group of two piles up to 50 tonne capacity each Lateral load testing of single pile in accordance with IS : 2911 part -IV for determining safe allowable lateral load on pile. Up to 50 tonne capacity Lateral load testing of single pile in accordance with IS : 2911 part -IV for determining safe allowable lateral load on pile. Above 50 tonne capacity Hardening compound Road marking paint (spirit based) Superior quality road marking paint C.P. Brass bibcock 15 mm C.P. Brass long nose bibcock 15 mm C.P. Brass long body bibcock 15 mm C.P. Brass stop cock (concealed) 15 mm C.P. Brass angle valve 15 mm Pressed clay tiles Plain ceiling tiles (BWP type phenol formaldehyde synthetic resin bonded) (600x600x12 mm) Semi perforated ceiling tiles (600x600x12 mm) 25 mm thick particle board 30 mm thick prelaminated flush door shutter IInd class teak wood lipping 25 mm wide x 12 mm thick 25 mm thick melamine faced prelaminated three layer particle board Granite Black marble, 18 mm thick slab, above 0.2 sqm up to 0.5 sqm (areawise) Granite Black marble, 18 mm thick slab, above 1.0 sqm up to 2.0 sqm (areawise) Aluminium T or L sections For flush door shutters Extra for providing teak veneering on one side instead of commercial veneering Paving Asphalt 60/70 penetration
Unit
Rate Rs.
per test
11,500.00
7250
per test
18,000.00
7251
per test
23,000.00
7252
per test
11,500.00
7253
per test litre litre litre each each each each each 1000 Nos each each sqm sqm metre sqm sqm sqm kilogram sqm tonne
18,000.00 29.00 97.00 148.00 258.00 220.00 258.00 258.00 288.00 8,900.00 90.00 90.00 390.00 716.00 28.00 708.00 1,500.00 1,615.00 195.00 225.00 23,200.00
7254 7255 7256 7257 7258 7259 7260 7261 7266 7267 7268 7269 7270 7271 7272 7295 7297 7306 7307 7309
33
Code No 7312 7313 7314 7315 7318 7319 7320 7321 7322 7323 7324 7325 7326 7327 7328 7329 7330 7331 7332 7333 7334 7335 7338 7339 7340 7342 7343 7344 7345 7346 7347 7348
Description Expandable fastener with plastic sleeve and M.S. screws. 25 mm long Expandable fastener with plastic sleeve and M.S. screws. 32 mm long Expandable fastener with plastic sleeve and M.S. screws. 40 mm long Expandable fastener with plastic sleeve and M.S. screws. 50 mm long Plasticizer / super plasticizer Wall form panel 1250x500 mm Tie bolt 12 mm dia 100 mm length Tie bolt 12 mm dia 150 mm length Tie bolt 20 mm dia 150 mm length Tie bolt 20 mm dia 225 mm length Spring coil 12 mm Plastic cone 12 mm dia Corner angle 45x45x5 mm 1.50 m long 100 mm channel shoulder 2.5 m long Double clip ( bridge clip) Single clip M.S. tube 40 mm dia Wall form panel 1250x450 mm Corner angle 45x45x5 m 2.50 m long Column clamp 450x1070 m Prop 2 m ( 2-3.5m) Binding wire Gun metal cramp Stainless steel cramp Stainless steel pin . Adjustable span ESO+SI (2.35-3.40) Adjustable telescopic prop 3 m (2.02-3.75 m) Beam clamp 300-380 mm (450-1070 mm) Prop 4 m Double coupler Cadmium plated full threaded steel screws (30x4 mm dia.) Aluminium washer 2 mm thick 15 mm dia
Unit
Rate Rs.
each each each each kilogram each each each each each each each each each each each metre each each each each kilogram kilogram kilogram kg each each each set each each 100 Nos 100 Nos
6.00 7.00 9.00 11.00 30.00 980.00 31.00 42.00 57.00 72.00 10.00 12.00 280.00 1,000.00 75.00 60.00 225.00 900.00 275.00 1,100.00 750.00 40.00 270.00 280.00 130.00 1,600.00 1,000.00 375.00 1,030.00 45.00 23.00 7.00
34
Code No 7349 7354 7358 7359 7361 7363 7364 7366 7367 7369 7375 7376 7377 7378 7379 7380 7381 7382 7385 7386 7388 7389 7390 7391 7392 7393 7394 7395 7396 7400
Description 12 mm M.S. 'U' beading Plastic encapsulated M.S. foot rest 30x20x15 cm Flushing Cistern P.V.C. 10 lts capacity ( low level ) (White) ( with fittings, accessories and flush pipe) P.V.C. automatic flushing cistern 5 lts capacity P.V.C. automatic flushing cistern 10 lts capacity 15 mm C.P. brass tap with elbow operation lever White glazed fire clay draining board 600x450x25 mm Glass reinforced Gyp sum ( GRG) board 8.5 mm thick Galvanised M.S. sheet 0.5 mm thick pressed channel section of size 50x32 mm Galvanised M.S. sheet 0.50 mm thick pressed stud. 48x34x36 mm G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Single lipped urinal G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Range of two lipped urinals G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Range of three lipped urinals G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Range of four lipped urinals White vitreous china clay half stall urinal flat back 580x380x350 mm or angle back 450x375x350 mm with waste fittings as per IS : 2556 Precast R.C.C. grating with frame 500x450 mm horizontal grating Precast R.C.C. grating with frame 450x100 mm vertical grating Bitumen emulsion rapid setting (R.S.) confirming to IS : 8887-1995 3 mm thick translucent white acrylic plastic sheet 12 thick particle board ceiling tile Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia bolt Anodising 15 microns on aluminium sections Neoprene/EPDM rubber gasket Anodising 25 microns on aluminium sections Powder coating 50 microns on aluminium sections. Polyester powder coating 50 microns on aluminium sections Double action hydraulic floor spring with stainless steel cover plate 6 mm dia. G.I. adjustable hangers including clips (up to 1.2 m length) Double action hydraulic floor spring with brass cover plate 15 mm PTMT bib cock
Unit metre each each each each each each sqm metre metre each each each each each each each tonne sqm sqm each kilogram metre kilogram kilogram kilogram each each each each
Rate Rs. 9.00 93.00 570.00 430.00 465.00 396.00 390.00 190.00 48.00 55.00 352.00 880.00 1,070.00 1,530.00 1,224.00 533.00 250.00 32,000.00 515.00 225.00 30.00 32.00 22.00 40.00 45.00 50.00 1,400.00 25.00 1,550.00 96.00
35
Code No 7401 7402 7403 7405 7406 7407 7408 7409 7410 7411 7412 7415 7416 7417 7418 7419 7420 7421 7422 7423 7424 7425 7426 7427 7428 7429 7430 7431 7432 7439 7442 7443 7444 7445
Description 15 mm PTMT bib cock with flange (fancy) 15 mm PTMT bib cock long body with flange 15 mm dia PTMT stop cock(male thread) 20 mm dia. PTMT stop cock PTMT pillar cock PTMT push cock 15 mm dia. PTMT push cock 12 mm dia. 20 mm BSP PTMT grating 100 mm dia. PTMP. Pillar cock (fancy) 15mm foam flow 125 mm grating with waste hole Rectangular type with openable circular lid 150 mm size 18 mm high with 100 mm dia. (110 gm) Double acting air valve 50 mm Double acting air valve 80 mm Double acting air valve 100 mm Water meter (including testing charges) 80 mm Water meter (including testing charges) 100 mm Water meter (including testing charges) 150 mm Water meter (including testing charges) 200 mm Dirt box strainer 80 mm Dirt box strainer 100 mm Dirt box strainer 150 mm Dirt box strainer 200 mm Cat's eye Water stops Serrated with central bulb (225 mm wide, 8-11 mm thick) Water stops Dumb bell with central bulb Kickers Wedge expansion hold fastener 1/4" or 6 mm Wedge expansion hold fastener 3/8" or 10 mm Wedge expansion hold fastener 1/2" or 12 mm 8mm thick (mirror polished tiles machine cut edge) Raj Nagar white Wheel 75 mm dia. 40 mm wide Aluminium single cleat of size 30x32x3 Aluminium grip strip of size 50x12x2 25 mm prelaminated flush door both side decorative
Unit each each each each each each each each Each each each each each each each each each each each each each each each metre metre metre each each each sqm each each each sqm
Rate Rs. 135.00 155.00 96.00 120.00 150.00 90.00 75.00 30.00 220.00 36.00 90.00 3,050.00 4,480.00 5,800.00 1,800.00 2,800.00 4,000.00 4,500.00 2,500.00 3,750.00 4,850.00 6,800.00 450.00 330.00 306.00 325.00 10.00 12.00 23.00 430.00 52.00 10.00 7.00 650.00
36
Code No 7449 7451 7452 7453 7466 7468 7477
Description Aluminium U beading Glass sheet (Pin headed) 4 mm thick Raj nagar plain white marble (table rubbed and polished) 18 mm thick above 0.10 sqm up to 0.20 sqm Raj nagar plain white marble (table rubbed and polished) 18 mm thick above 0.20 sqm up to 0.50 sqm Second class deodar teak wood lipping 30 mm widthx12mm Veneered particle board with commercial veneering on both sides 12 mm thick Prelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823 (exterior grade)12 mm thick Prelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823 (exterior grade)18 mm thick Prelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823 (exterior grade)25 mm thick Prelaminated particle board with both sides decorative lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823 (exterior grade)12 mm thick Oxidised M. S. hinges finished with nickel plating 50 mm (Over all width) Oxidised M. S. hinges finished with nickel plating 65 mm (Over all width) Prefix PTMT - Waste Coupling 31/32MM Prefix PTMT - Waste Coupling 38/40MM Prefix PTMT - Bottle Trap 31/32MM Prefix PTMT - Bottle Trap 38/40MM Prefix PTMT - Ball Cock 15mm Complete with Epoxy Coated Aluminium Road & H.D. Ball Prefix PTMT - Ball Cock 20mm Complete with Epoxy Coated Aluminium Road & H.D. Ball Prefix PTMT - Ball Cock 25mm Complete with Epoxy Coated Aluminium Road & H.D. Ball Prefix PTMT - Ball Cock 40mm Complete with Epoxy Coated Aluminium Road & H.D. Ball Prefix PTMT - Ball Cock 50mm Complete with Epoxy Coated Aluminium Road & H.D. Ball Prefix PTMT - Angle Stop cock with Flange 15mm
Unit kilogram sqm sqm sqm metre sqm
Rate Rs. 195.00 160.00 540.00 580.00 15.00 418.00
sqm
595.00
7478
sqm
716.00
7479
sqm
775.00
7480
sqm metre metre Each Each Each Each Each Each Each Each Each Each
625.00 29.00 34.00 45.00 66.00 295.00 320.00 121.00 175.00 396.00 745.00 1,120.00 120.00
7485 7486 7491 7492 7493 7494 7495 7496 7497 7498 7499 7500
37
Code No 7501 7503 7504 7505 7506 7507 7508 7509 7512 7513 7514 7515 7516 7517 7518 7552 7553 7555 7556 7651 7652 7653 7654 7655 7656 7657 7658 7659 7660 7661 7662 7663 7664 7665
Description Prefix PTMT - Swiveling shower 15mm Prefix PTMT - Liquid Soap Container of 400ml capacity Prefix PTMT - Towel Ring 215xd200x37mm Prefix PTMT - Towel Rail (450MM) Prefix PTMT - Towel Rail (600MM) Prefix PTMT - Shelf 450x124x36mm Prefix PTMT - Urinal Spreader 15MM Prefix PTMT - Soap Dish/Holder 138x102x75mm PTMT handle 125x34x24mm PTMT handle 150x34x24mm PTMT butt hinges 75x60x10mm PTMT butt hinges 100x75x10mm PTMT Tower bolt 152x42x18mm PTMT Tower bolt 202x42x18mm PTMT door catcher 72x42mm Coir veneered board 4mm thick Coir veneered board 6mm thick Coir veneered board 12mm thick Coir veneered board 18mm thick Ductile Iron class K - 9 pipe Conforming to I.S. 8329 100mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 150mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 200mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 250mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 300mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 350mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 400mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 450mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 500mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 600mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 700mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 750mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 800mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 900mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 1000mm dia
Unit Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each sqm sqm sqm sqm Metre Metre Metre Metre Metre Metre Metre Metre Metre Metre Metre Metre Metre Metre Metre
Rate Rs. 81.00 135.00 108.00 180.00 210.00 245.00 120.00 108.00 27.00 30.00 36.00 48.00 60.00 72.00 24.00 235.00 308.00 548.00 820.00 658.00 978.00 1,348.00 1,743.00 2,238.00 2,625.00 3,763.00 4,175.00 5,600.00 6,275.00 8,538.00 9,725.00 10,000.00 11,663.00 13,125.00
38
Code No 7666 7668 7669 7670 7671 7672 7673 7674 7675 7676 7677 7678 7679 7680 7681 7682 7683 7684 7685 7686 7687 7688 7689 7690 7691 7692 7693 7694 7695 7696 7697 7698
Description Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 100mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 150mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 200mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 250mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 300mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 350mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 400mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 450mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 500mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 600mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 700mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 750mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 800mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 900mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 1000mm dia Ductile Iron K - 12 specials suitable for push on jointing up to 600mm dia Ductile Iron K - 12 specials suitable for push on jointing over 600mm dia Ductile Iron specials suitable for mechanical jointing as per I.S. 9523 up to 600mm dia Ductile Iron Specials suitable for mechanical jointing as per I.S. 9523 over 600mm dia Ductile Iron Pipe Class K-9 flanges and welding 100mm dia Ductile Iron Pipe Class K-9 flanges and welding 150 dia Ductile Iron Pipe Class K-9 flanges and welding 200mm dia Ductile Iron Pipe Class K-9 flanges and welding 250mm dia Ductile Iron Pipe Class K-9 flanges and welding 300mm dia Ductile Iron Pipe Class K-9 flanges and welding 350mm dia Ductile Iron Pipe Class K-9 flanges and welding 400mm dia Ductile Iron Pipe Class K-9 flanges and welding 450mm dia Ductile Iron Pipe Class K-9 flanges and welding 500mm dia Ductile Iron Pipe Class K-9 flanges and welding 600mm dia Ductile Iron Pipe Class K-9 flanges and welding 700mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 100mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 125mm dia
Unit Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Quintal Quintal Quintal Quintal Metre metre Metre Metre metre Metre Metre Metre Metre Metre Metre Metre metre
Rate Rs. 25.00 35.00 62.00 68.00 98.00 123.00 248.00 275.00 285.00 348.00 550.00 648.00 725.00 968.00 1,188.00 8,938.00 13,413.00 9,400.00 14,239.00 1,888.00 2,613.00 3,388.00 4,498.00 5,788.00 7,210.00 8,613.00 10,413.00 12,625.00 17,125.00 21,125.00 624.00 763.00
39
Code No 7699 7700 7701 7702 7703 7704 7705 7706 7707 7708 7709 7710 7711 7712 7713 7714 7715 7716 7717 7718 7719 7720 7721 7722 7723
Description S&S Centrifugally (Spun) C.I. Pipe class LA 150mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 200mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 250mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 300mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 350mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 400mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 450mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 500mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 600mm dia S&S Centrifugally (Spun) C.I. Pipe Specials as per IS 1538 suitable for lead jointing up to 300mm dia S&S Centrifugally (Spun) C.I. Pipe Specials as per IS 1538 suitable for lead jointing over 300mm dia S&S Centrifugally (Spun) C.I. Pipe specials suitable for mechanical joint as per I.S. 13382 up to 300mm dia S&S Centrifugally (Spun) C.I. Pipe Specials suitable for mechanical joint as per IS 13382 over 300mm dia Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 100mm dia Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 150mm dia Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 200mm dia Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 250mm dia Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 300mm dia Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 350mm dia Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 400mm dia Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 450mm dia Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 500mm dia Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 600mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 100mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 150mm dia
Unit metre Metre Metre Metre metre Metre Metre Metre Metre Quintal Quintal Quintal Quintal Metre Metre Metre Metre Metre Metre metre Metre metre Metre Metre Metre
Rate Rs. 901.00 1,252.00 1,779.00 2,366.00 2,918.00 3,574.00 4,276.00 5,211.00 6,884.00 3,530.00 3,988.00 5,338.00 5,580.00 977.00 1,511.00 2,092.00 2,800.00 3,559.00 4,553.00 5,885.00 7,627.00 9,962.00 12,992.00 597.00 870.00
40
Code No 7724 7725 7726 7727 7728 7729 7730 7731 7732 7733 7734 7735 7736 7737 7738 7739 7741 7742 7800 7801 7802 7803 7804
Description Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 200mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 250mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 300mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 350mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 400mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 450mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 500mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 600mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 700mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 800mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 900mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 1000mm dia Extruded burnt flyash clay sewer bricks conforming to I.S 4885 - 1988 Fly ash lime bricks (FALG Bricks) conforming to I.S. 12894-1989 Calcium Silicate Bricks machine moulded confirming to I.S. 4139 1989 Modified Bitumen Refinery produced CRMB - 55 Modified Bitumen Refinery produced CRMB - 60 Bitumen emulsion medium setting (M.S.) confirming to IS : 8887-1995 Ceramic Glazed Tiles Ist quality minimum thickness 5mm in all colours shades and designs except burgundy, bottle green, black Ceramic Glazed Tiles Ist quality 300 x 300mm in all shades and designs of White, Ivory, grey, Fume Red brown etc. Ceramic Glazed Tiles Ist quality 300 x 300 in all shades designs except White, Ivory, Grey, Fume Red Brown etc. Prefix Rectified - Ceramic Glazed Tiles Ist quality 300 x 300 or more in all shades designs White, Ivory, Grey, Fume Red Brown etc. Prefix Rectified - Ceramic Glazed Tiles Ist quality 300 x 300 or more in all shades designs except White, Ivory, Grey, Fume Red Brown etc. Salem Stainless steel AISI - 304 (18/8) Orrisa pattern W.C. pan 724mm X 578mm Salem Stainless steel AISI - 304 (18/8) Round basin 405mm X 355mm Salem Stainless steel AISI - 304 (18/8) Wash basin 530mm X 345mm Centrifugally cast (spun) iron S&S 100 mm inlet and 100 mm outlet Centrifugally cast (spun) iron S&S 100 mm inlet and 75 mm outlet
Unit Metre Metre Metre Metre Metre Metre Metre metre Metre Metre metre metre 1000 Nos 1000 Nos 1000 Nos Tonne tonne tonne Sq.m. Sq.m. Sq.m. Sq.m.
Rate Rs. 1,237.00 1,675.00 2,369.00 2,728.00 3,256.00 3,861.00 4,557.00 6,011.00 7,463.00 10,405.00 12,798.00 15,505.00 3,550.00 1,792.00 3,083.00 26,000.00 26,300.00 19,500.00 268.00 320.00 347.00 462.00
Sq.m. each each each each each
496.00 3,350.00 1,500.00 1,350.00 309.00 334.00
7805 7806 7807 7808 7809
41
Code No 7850 7857 7858 7859 7861 7862 7863 7864 7865 7866 7900 7901 7902 7903 7904 8001 8002 8003 8004 8006 8007 8008 8010 8011 8012 8100 8200 8201 8203 8204
Description Agaria White marble slab plain 18mm thick P.T.M.T. Grating square slit 150mm P.T.M.T. Urinal cock 15mm dia P.T.M.T. Bib cock with nozzle 15mm P.T.M.T. Stop cock (concealed) 15mm 15 mm nominal bore and 30 cm length PVC connection pipe with P.T.M.T. Nuts 15 mm nominal bore and 45 cm length PVC connection pipe with P.T.M.T. Nuts P.T.M.T. extension nipple 15mm P.T.M.T. extension nipple 20mm P.T.M.T. extension nipple 25mm Modular bricks of class designation 75 Machine moulded perforated FPS bricks of class designation 125 Machine moulded modular perforated bricks of class designation 125 Machine moulded FPS bricks of class designation 125 Machine moulded tile bricks of class designation 125 24 mm thick Factory made shutters with frame, rails and panels of PVC extruded sections in white, grey or wooden finish 30 mm thick Factory made shutters with frame, rails and panels of PVC extruded sections in white, grey or wooden finish Factory made PVC rigid foam paneled shutter i/c carriage Factory made PVC rigid foam paneled shutter as per IS : 4020 i/c carriage Factory made PVC rigid foam sheet 1mm thick Factory made PVC rigid foam sheet 5mm thick Factory made prelaminated PVC rigid foam sheet 5mm thick 48mmX40mmX1.5mm thick Factory made door frame of PVC extruded sections in white, grey or wooden finish Factory made door frame PVC extruded sheet i/c carriage Adhesive solvent cement Powder coated M.S. butt hinges 100mm X58mmX1.9mm A.P.P. modified polymeric felt (two layers) 1.5 mm thick A.P.P. modified polymeric felt (two layers) 2 mm thick A.P.P. modified 2 mm thick membrane reinforced with glass fibre matt A.P.P. modified 3 mm thick membrane reinforced with glass fibre
Unit sqm each each each each each each each each each 1000 Nos 1000 Nos 1000 Nos 1000 Nos 1000 Nos sqm sqm sqm sqm sqm sqm sqm metre metre kg 10 Nos sqm sqm sqm sqm
Rate Rs. 1000.00 70.00 90.00 110.00 160.00 27.00 32.00 30.00 36.00 54.00 2,050.00 3,233.00 3,200.00 2,767.00 2,717.00 1,830.00 1,900.00 1,743.00 2,148.00 145.00 558.00 660.00 112.00 294.00 150.00 66.00 50.00 85.00 147.00 185.00
42
Code No
Description matt
Unit
Rate Rs.
8205 8206 8207 8210 8211 8212 8214 8215 8216 8217 8218 8219 8220 8221 8222 8223 8224 8225 8300 8301 8302 8303 8304 8305 8501 8502 8504 8505 8506 8507 8508
A.P.P. modified 3 mm thick membrane reinforced with polyester matt Bitumen primer for bitumen membrane Geotextile 120 gsm membrane Stainless steel screws 50 mm Stainless steel screws 40 mm Stainless steel screws 30 mm Stainless steel screws 20 mm Stainless steel butt hinges 125x64x1.9 mm IS : 12817 marked Stainless steel butt hinges 100x58x1.9 mm IS : 12817 marked Stainless steel butt hinges 75x47x1.8 mm IS : 12817 marked Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked Stainless steel butt hinges (heavy weight) 125x64x2.5 mm IS : 12817 marked Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 12817 marked Stainless steel butt hinges (heavy weight) 75x50x2.5 mm IS : 12817 marked M.S. heavy weight but hinges 125x90x4.0mm IS : 1341 marked. M.S. heavy weight butt hinges 100x75x3.5 mm IS: 1341 marked M.S. heavy weight butt hinges 75x60x3.1 mm IS: 1341 marked M.S. heavy weight butt hinges 50x40x2.5 mm IS : 1341 marked 1216 mm PE-AL-PE Composite pressure pipe 1620 mm PE-AL-PE Composite pressure pipe 2025 mm PE-AL-PE Composite pressure pipe 2532 mm PE-AL-PE Composite pressure pipe 3240 mm PE-AL-PE Composite pressure pipe 4050 mm PE-AL-PE Composite pressure pipe Polymer modified cementation coating Fibre glass cloth Multi surface paint Acrylic exterior paint Premium Acrylic exterior paint Textured exterior paint Primer for cement paint
sqm litre sqm 100 Nos 100 Nos 100 Nos 100 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos. 10 Nos 10 Nos Metre Metre Metre Metre Metre Metre kilogram sqm litre litre litre litre litre
221.00 54.00 25.00 213.00 157.00 98.00 63.00 200.00 143.00 112.00 90.00 261.00 185.00 155.00 256.00 133.00 67.00 52.00 79.00 97.00 126.00 172.00 227.00 304.00 114.00 33.00 264.00 123.00 202.00 183.00 52.00
43
Code No 8509 8510 8611 8612 8613 8614 8615 8616 8617 8618 8620 8621 8622 8623 8625 8626 8627 8628 8629 8630 8631 8632 8633 8634 8635 8636 8637
Description Special Primer (C.W.) Metal Primer (U.G.) Main T ceiling sections 24x38x0.3 mm (3 metre long) Perimeter wall angle 21x21 mm x 0.3 mm (3 metre long) Intermediate cross T-Section 24x25x0.3 mm (1.2 mtr long) Intermediate cross T-Section 24x25x0.3mm (0.6 mtr. long) Hanger rod 0.5 mm thick Adjustment clip Soffit cleat Dash fastener 6 mm dia 50 mm long Vitrified floor tile 50x50 cm Vitrified floor tile 60x60 cm Vitrified floor tile 80x80 cm Vitrified floor tile 100x100 cm Poly propylene- Random - Co - Polymer (PPR) pipes SDR 7.4 - 16 Outer dia Poly propylene - Random - Co - Polymer (PPR) pipes SDR 7.4 20mm Outer dia. Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 - 25 mm outer dia. Poly propylene - Random - Co - poymer (PPR) pipes SDR 7.4 - 32 mm Outer dia. Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 40mm Outer dia. Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 50mm Outer dia. Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 63mm Outer dia. Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 75mm Outer dia. Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 90mm Outer dia. Poly propylene - Random - Co - polymer (PPR) pipes SDR - 11 110mm Outer dia. Poly propylene - Random - Co - polymer (PPR) pipes SDR - 11160mm Outer dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 15 mm outer dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm outer dia.
Unit litre litre each each each each each each each each sqm sqm sqm sqm metre metre metre metre metre metre metre metre metre metre metre metre metre
Rate Rs. 76.00 91.00 162.00 102.00 62.00 29.00 5.00 4.40 2.30 8.00 645.00 700.00 1,076.00 1,290.00 29.00 44.00 68.00 111.00 176.00 257.00 400.00 575.00 917.00 962.00 2,028.00 45.00 55.00
44
Code No 8638 8639 8640 8641 8642 8643 8644 8645 8646 8647 8648 8649 8650 8651 8652 8653 8654 8655 8656 8657 8658 8659 8660 8661 8662 8663 8664 8665 8666 8667
Description Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm outer dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 32 mm outer dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 40 mm outer dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 50 mm outer dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 62.5mm inner dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 75 mm inner dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 100 mm inner dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 150 mm inner dia. Silicon sealant. Stainless steal screws 30mm x4mm. Hermetically sealed double glazed unit made with 6mm thick clear float glass both side having 12 mm air gap. Stainless steel (SS 304 grade) adjustable friction window stay. 205 x 19mm Stainless steel (SS 304 grade) adjustable friction window stay 255 x 19mm Stainless steel (SS 304 grade) adjustable friction window stay. 355 x 19mm Stainless steel (SS 304 grade) adjustable friction window stay. 510 x 19mm Stainless steel (SS 304 grade) adjustable friction window stay. 710 x 19mm Masking tape. Autoclaved aerated cement (AAC) blocks. Gypsum panel 666 X 500 X 100 mm size. Bonding plaster for Gypsum panel. Mechanised Autoclaved fly ash lime bricks. Water proof ply 12mm thick. Aluminium casement window fastener (Anodised AC 15 ) Aluminium casement window fastener (powder coated ). Aluminium casement window fastener (polyester powder coated). Aluminium round shape handle (anodised AC 15) Aluminium round shape handle (powder coated) Aluminium round shape handle (polyester powder coated). Stainless steel screws 25mm x4mm UV stabilised 2 mm thick plain FRP sheet .
Unit metre metre metre metre metre metre metre metre cartridge cent sqm each each each each each metre cum sqm kg 1000 Nos sqm each each each each each each cent sqm
Rate Rs. 78.00 105.00 150.00 245.00 783.00 1,030.00 1,430.00 2,490.00 281.00 25.00 1,980.00 145.60 161.20 208.00 390.00 715.00 1.40 1,650.00 544.00 50.00 2,200.00 572.00 30.00 33.00 35.00 37.00 41.00 43.00 21.00 400.00
45
Code No 8668 8669 8670 8671 8672 8673 8674 8675 8676 8677 8678 8683 8684 8685 8686 8687 8688 8689 8690 8691 8692 8693 8694 8695 8696 8697 8698 8699 8700 8703 8704
Description UV stabilised 2 mm thick corrugated FRP sheet . Mangalore ridge tiles 20mm thick. Mangalore tiles 20mm thick. Precoated galvanised iron profile sheet 0.50 mm TCT Precoated galvanised steel plain ridges. Precoated galvanised steel flashings/aprons. Precoated galvanised steel gutter Precoated galvanised steel north light curves. Precoated galvanised steel barge board. Precoated galvanised steel crimp curve 1mm thick 35mm wide bright finished stainless steel piano hinges . Red sand stone gang saw cut 30mm thick. White sand stone gang saw cut 30mm thick. Delineator Precast C.C. Kerb stone M - 25 Thermoplastic paint Glass beads Interlocking C.C. paver block ( 60 mm thick, M-30 ) High intensity retro - reflective sheet. Punched tape concertina coil 600 m dia. 10m openable length (Total length 90m) RBT reinforced barbed wire. Turn buckle and strengthening bolt. Precast pavement slab 450 x 450 x 50mm (M - 30). Chain link fabric fencing mesh of size 50x50mm made of G.I. wire of dia. 4mm. Chain link fabric fencing mesh of size 50x50mm made of G.I. wire of dia. 4mm, PVC coated to outer dia. 5mm. Chain link fabric fencing mesh of size 25x25mm made of G.I. wire of dia. 3mm. Stainless steel cramps with nuts, bolts and washer for dry stone cladding . 8 mm thick tapered edge calcium silicate board . 10 mm thick calcium silicate board. Telescopic drawer channels 300mm long . Stainless steel roller for sliding arrangement in racks/ cupboards/
Unit sqm each each sqm metre metre metre metre metre sqm metre sqm sqm each cum kg kg sqm sqm bundle metre each set each sqm sqm sqm each sqm sqm set each
Rate Rs. 474.00 25.00 9.50 325.00 330.00 330.00 360.00 360.00 330.00 420.00 30.00 325.00 360.00 560.00 3,500.00 67.22 68.00 225.00 1,400.00 650.00 7.50 35.00 40.00 225.00 250.00 300.00 200.00 194.00 323.00 92.00 5.00
46
Code No
Description cabinets shutter .
Unit
Rate Rs.
8705 8706 8707 8708 8710 8711 8713 8714 8715 8716 8717 8719 8720 8721 8722 8723 8724 8725 8726 8727 8730 8731 9999
50mmX42mmX2mm thick Factory made door frame of PVC extruded sections in white, grey or wooden finish 25mm thick factory made PVC flush door shutter i/c carriage.
metre sqm
117.00 1,975.00 333.00 1,580.00 223.00 1,975.00 3,520.00 13.50 10.00 152.50 130.00 19.00 34.00 20.00 1.50 60.00 740.00 690.00 405.00 330.00 1,960.00 13.75 1.00
Factory made glass reinforced plastic door frame 90x45 mm i/c carriage. metre 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage. Factory made solid PVC door frame 60 x 30mm i/c carriage. 28mm factory made solid PVC panel door shutter i/c carriage. Fiber glass reinforced plastic chajja. Magnetic catcher triple strip vertical type. Magnetic catcher double strip horizontal type. 100 mm mortice lock with 6 levers for aluminium door. 12.5 mm thick Glass fibre reinforced Gypsum board . 2nd class teak wood lipping/ moulded beading or Taj beading of size 18X5mm Ceiling sections 0.55 mm thick having a knurled web of 51.55mm and two flanges of 26mm each with lips of 10.55mm. Perimeter channel having one flange of 20mm and another flange of 30mm with thickness of 0.55mm and web of length 27mm. Nylon sleeves & wooden screws (40mm) Counter sunk ribbed head screw 25mm. 12mm thick marine plywood conforming to IS:710 12mm thick fire retardant plywood conforming to IS: 5509. 1.5mm thick decorative laminated sheet 1.0mm thick decorative laminated sheet 30 mm thick factory made glass fiber reinforced plastic flush door shutter i/c carriage. High polymer modified quickset tile adhesive. Sundries sqm metre sqm sqm each each each sqm metre metre metre each cent sqm sqm sqm sqm sqm per kg L.S.
47
BASIC RATES 0.4 CARRIAGE CODES

(Carriage by Mechanical Transport including loading, Unloading and stacking) Note: - These rates are exclusive of contractors profit and overhead charges.
Code No 2200 2201 2202 2203 2204 2205 2206 2207 2208 2209 2211 2215 2216 2224 2225 2226 2227 2228 2229 2241 2242 2260 2261 2262 2264 2265 2266
Description Steam coal Bricks Stone aggregate below 40 mm nominal size Coarse sand Timber Steel Stone aggregate 40 mm nominal size and above Brick tiles Lime Cement Tar bitumen Soling stone & masonry stone Stone blocks white & red sand stone & kota stone slab S.W. pipes100 mm dia S.W. pipes150 mm dia S.W. pipes200 mm dia S.W. pipes230 mm dia S.W. pipes250 mm dia S.W. pipes300 mm dia Good earth Dump manure Brick aggregate Fine sand (1 part badarpur sand : 2 parts jamuna sand) Fly ash Rubbish Moorum Surkhi
Unit tonne 1000 Nos cum cum cum tonne cum 1000 Nos cum tonne tonne cum tonne 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre cum cum cum cum cum cum cum cum
Rate Rs. 60.81 141.88 53.21 53.21 60.81 47.29 57.83 85.13 53.21 47.29 53.21 62.60 47.29 70.94 141.88 236.47 337.82 405.38 506.73 66.51 57.83 57.83 53.21 53.21 53.21 53.21 53.21
48
Code No 2267 2268 2271 2273 2275 2281 2287 2290 2299 2302 2303 2308 2309 2311 2314 2317 2319 2320 2321 2322 2323 2324 2325 2326 2327 2328 2329 2330 2331 2332 2333 2334
Description Stone dust Marble dust and marble chips G.I. pipes below 100 mm dia A.C.sheet and accessories R.C.C. pipes 100 mm dia R.C.C. pipes 150 mm dia R.C.C. pipes 250 mm dia R.C.C. pipes 300 mm dia R.C.C. pipes 450 & 500 mm dia G.I.sheet and accessories R.C.C. pipes 600, 700, 750 & 800 mm dia Plaster of paris Cast iron fittings Red bajri Barbed wire Sludge Spun iron S & S pipes 100 mm dia Spun iron S & S pipes 125 mm dia Spun iron S & S pipes 150 mm dia Spun iron S & S pipes 200 mm dia Spun iron S & S pipes 250 mm dia Spun iron S & S pipes 300 mm dia Spun iron S & S pipes 350 mm dia Spun iron S & S pipes 400 mm dia Spun iron S & S pipes 450 mm dia Spun iron S & S pipes 500 mm dia Spun iron S & S pipes 600mm dia C.I. pipes 500 mm dia R.C.C. pipes 900 mm dia R.C.C. pipes 1000 mm dia R.C.C. pipes 1100 mm dia R.C.C. pipes 1200 mm dia
Unit cum cum tonne tonne 100 metre 100 metre 100 metre 100 metre 100 metre tonne 100 metre tonne tonne cum tonne cum 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre
Rate Rs. 53.21 53.21 47.29 47.29 116.30 193.83 448.05 553.80 1,292.20 47.29 1,938.30 47.29 47.29 53.21 47.29 57.83 116.30 155.35 193.83 315.30 448.05 553.80 775.32 1,057.26 1,292.20 1,292.20 1,938.30 1,292.20 2,907.45 3,876.61 3,876.61 3,876.61
49
Code No 2335 2341 2342 2343 2344 2345 2346 2347 2348 2349 2350 2351 2352 2353 2355 2356 2357
Description Jamuna sand Pig lead Solvent/ Diesel. Ductile iron pipes (k7) 100 mm dia Cast iron pipes 150 mm dia Cast iron pipes 200 mm dia Cast iron pipes 250 mm dia Cast iron pipes 300 mm dia Cast iron pipes 350 mm dia Cast iron pipes 400 mm dia Cast iron pipes 450 mm dia Cast iron pipes 500 mm dia Cast iron pipes 600 mm dia Cast iron pipes 700 mm dia Cast iron pipes 800 mm dia Cast iron pipes 900 mm dia Cast iron pipes 1000 mm dia
Unit cum tonne quintal 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre
Rate Rs. 53.21 47.29 5.32 116.30 193.83 315.30 448.05 553.80 775.32 1,057.26 1,292.20 1,292.20 1,938.30 1,938.30 1,938.30 2,907.45 3,876.61
50
SUB HEAD : 1.0
CARRIAGE OF MATERIALS
51
BASIC RATES (SH: 1.0 CARRIAGE OF MATERIALS)

Code No 0005 0114 0115 0128 1235 5001 9999 Description Unit Rate Rs. 1008.00 135.25 135.25 138.45 30.25 95.00 1.00
Hire Charges of truck Beldar Cooli Mate High Speed Diesel Mobil Oil Sundries
Day Day Day Day Litre Litre L.S.
SUB HEAD 1.0 CARRIAGE OF MATERIALS
53
1. CARRIAGE OF MATERIALS 1.1 Carriage of material by mechanical transport including loading, unloading and stacking
Code Materials Unit 1 Km 2 Km 3 Km 4 Km Rate 5 Km Remarks Beyond Beyond 5 Km 10 Km. upto 10 upto 20 Km. per Km. per Km. Km. 9 10 4.67 5.84 5.08 9.35 4.67 5.08 5.50 12.46 7.48 3.90 4.88 4.24 7.80 3.90 4.24 4.59 10.40 6.24 Beyond 20 Km. per Km.
1 1.1.1 1.1.2 1.1.3 1.1.4 1.1.5 1.1.6 1.1.7 1.1.8 1.1.9 1.1.10
2 Lime, moorum, building rubbish Earth Manure or sludge Excavated rock Sand, stone aggregate below 40 mm nominal size. Stone aggregate 40 mm nominal size and above. Soling stone Bricks Brick Tiles Cement, stone blcoks, G.I., C.I., A.C. & C.C. pipes below 100 mm dia and other heavy materials Steel Timber Tar Bitumen Solvent Steam Coal
3 Cum Cum Cum Cum Cum Cum Cum 1000 Nos. 1000 Nos
4 39.53 49.42 42.97 79.07 39.53 42.97 46.51 105.42 63.25
5 45.13 56.41 49.05 90.25 45.13 49.05 53.09 120.33 72.20
6 50.66 63.32 55.07 101.32 50.66 55.07 59.60 135.09 81.06
7 55.99 69.99 60.86 111.99 55.99 60.86 65.87 149.32 89.59
8 61.19 76.48 66.51 122.37 61.19 66.51 71.99 163.17 97.90
11 3.24 4.05 3.52 6.48 3.24 3.52 3.81 8.64 5.18
12 The rates will be applicable to net quantities after deduction of prescribed percentage for voids mentioned in the specification under subhead "Carriage of Materials"
1.1.11 1.1.12 1.1.13 1.1.14 1.1.15
Tonne Tonne Cum Tonne Qtl Tonne
35.14 35.14 45.18 39.53 3.95 45.18
40.11 40.11 51.57 45.13 4.51 51.57
45.03 45.03 57.90 50.66 5.07 57.90
49.77 49.77 63.99 55.99 5.60 63.99
54.39 54.39 69.93 61.19 6.12 69.93
4.15 4.15 5.34 4.67 0.47 5.34
3.47 3.47 4.46 3.90 0.39 4.46
2.88 2.88 3.70 3.24 0.32 3.70
SUB HEAD - 1.0 CARRIAGE OF MATERIALS
54
Code
Materials
Unit 1 Km 2 Km 3 Km 4 Km
Rate 5 Km
Remarks Beyond Beyond 5 Km 10 Km. upto 10 upto 20 Km. per Km. per Km. Km. 9 10 Beyond 20 Km. per Km.
1 1.1.16 1.1.16.1 1.1.16.2 1.1.16.3 1.1.16.4 1.1.16.5 1.1.16.6 1.1.16.7 1.1.16.8 1.1.16.9 1.1.16.10 1.1.16.11 1.1.17
2 S.W.Pipe 100 mm dia 150 mm dia 200 mm dia 230 mm dia 250 mm dia 300 mm dia 350 mm dia 400 mm dia 450 mm dia 500 mm dia 600 mm dia AC pipes, Steel Cylinder, RC Pipes, CI Pipes and unreinforced cement pipes 100 mm dia 125 mm dia 150 mm dia 200 mm dia 250 mm dia 300 mm dia 350 mm dia
11
12
100m 100m 100m 100m 100m 100m 100m 100m 100m 100m 100m
52.71 60.17 67.55 74.66 105.42 120.33 135.09 149.32 175.71 200.56 225.15 248.86 251.01 286.51 321.65 355.51 301.21 343.81 385.98 426.62 376.52 429.76 482.47 533.27 527.12 601.67 675.46 746.58 753.03 859.53 964.95 1066.54 958.40 1093.94 1228.12 1357.41 1054.24 1203.34 1350.93 1493.15 1317.80 1504.17 1688.66 1866.44
81.58 163.17 271.94 388.49 466.19 582.74 815.83 1165.47 1483.33 1631.66 2039.58
6.23 12.46 20.77 29.67 35.61 44.51 62.31 89.02 113.30 124.63 155.79
5.20 10.40 17.34 24.77 29.72 37.15 52.01 74.30 94.57 104.03 130.03
4.32 8.64 14.40 20.57 24.69 30.86 43.20 61.72 78.55 86.41 108.01
1.1.17.1 1.1.17.2 1.1.17.3 1.1.17.4 1.1.17.5 1.1.17.6 1.1.17.7
100 m 100 m 100 m 100 m 100 m 100 m 100 m
86.41 115.43 144.02 234.28 332.92 411.49 576.09
98.63 131.75 164.39 267.41 380.00 469.69 657.56
110.73 147.91 184.55 300.21 426.61 527.29 738.21
122.39 163.48 203.98 331.81 471.52 582.81 815.93
133.74 178.65 222.90 362.59 515.26 636.87 891.62
10.22 13.65 17.03 27.70 39.36 48.64 68.10
8.53 11.39 14.21 23.12 32.85 40.60 56.85
7.08 9.46 11.80 19.20 27.29 33.73 47.22
55
Code
Materials
Unit 1 Km 2 Km 3 Km 4 Km
1 2 1.1.17.8 400 mm dia 1.1.17.9 450, 500 mm dia 1.1.17.10 600, 700, 750 & 800 mm dia 1.1.17.11 900 mm dia 1.1.17.12 1000, 1100 & 1200 mm dia
3 100 m 100 m 100 m 100 m 100 m
4 785.58
Beyond 5 Km upto 10 Km. per Km. 5 6 7 8 9 896.67 1006.65 1112.63 1215.84 92.87 113.50 170.26 255.39 340.51
Rate 5 Km
Remarks Beyond Beyond 10 Km. 20 Km. upto 20 per Km. Km. per Km. 10 11 77.52 64.39 94.74 142.11 213.17 284.23 78.69 118.04 177.06 236.08
12
960.15 1095.93 1230.35 1359.88 1486.03 1440.22 1643.90 1845.53 2039.83 2229.05 2160.33 2465.85 2768.30 3059.74 3343.57 2880.44 3287.80 3691.06 4079.65 4458.10
56
1.0 CARRIAGE OF MATERIALS

1.2 Carriage of material by manual labour including loading, unloading and stacking for lead less than 0.5 km Code No. Materials Unit Cost of carriage including loading, unloading & stacking for first 50 m. Every additional lead of 50m or part thereof beyond Ist 50m upto 9 such additional leads. 5 Remarks
1 1.2.1 1.2.2 1.2.3 1.2.4 1.2.5
2 Lime, moorum, building rubbish. Earth Manure or sludge Excavated rock Sand, stone aggregate below 40 mm nominal size. Stone aggregate 40 mm nominal size and above. Soling stone Bricks
Cum Cum Cum Cum
34.08 42.61 37.05 68.17
7.42 9.28 8.07 14.84
Cum
42.61
9.28
6 The rate is applicable to net quantities after deduction of prescribed percentage for voids mentioned in the specifications under sub-head "Carriage of Materials"
1.2.6
1.2.7 1.2.8 1.2.9
Cum Cum 1000 Nos.
46.06 50.12 79.53
10.03 10.91 17.32
1.2.10 1.2.11
1.2.12 1.2.13 1.2.14 1.2.15 1.2.16 1.2.16.1 1.2.16.2 1.2.16.3 1.2.16.4 1.2.16.5 1.2.16.6
Brick tiles, Allahabad 1000 roofing tiles (flat or Nos. round) 1000 Steam Coal Stone blocks, G.I., C.I. Pipes below 100 mm dia. and other heavy materials Tonne Cement Tonne Steel Tonne Timber Cum Tar, Bitumen etc. Tonne S.W.Pipes 100mm dia 150mm dia 200mm dia 230mm dia 250mm dia 300mm dia 100 m 100 m 100 m 100 m 100 m 100 m
49.71 39.77
10.82 8.66
31.11 24.68 53.00 34.07 31.11 62.27 102.36 143.24 183.45 238.49 340.70
4.56 3.62 7.78 5.00 4.56 9.14 15.02 21.02 26.92 35.00 49.99 The length of S.W. pipes will be measured exclusive of the internal depth of sockets.
57
1 1.2.16.7 1.2.16.8 1.2.16.9 1.2.16.10 1.2.16.11 1.2.17
1.2.17.1 1.2.17.2 1.2.17.3 1.2.17.4 1.2.17.5 1.2.17.6 1.2.17.7 1.2.17.8 1.2.17.9 1.2.17.10
2 350mm dia 400mm dia 450mm dia 500mm dia 600mm dia R.C.C pipes, steel cylinder, R.C pipes,C.I. Piipes and unreinforced cement pipes 100mm dia 125mm dia 150mm dia 200mm dia 250mm dia 300mm dia 350mm dia 400mm dia 450 & 500mm dia 600,700,750 & 800mm dia Asbestos Cement pipes dia 50 mm 80mm dia 100mm dia 150mm dia
3 100 m 100 m 100 m 100 m 100 m
4 476.98 596.23 722.70 883.30 1084.05
5 69.99 87.49 106.05 129.61 159.07
100 m 100 m 100 m 100 m 100 m 100 m 100 m 100 m 100 m 100 m
84.07 102.87 118.46 177.76 312.43 390.97 558.96 650.43 867.24 953.96
12.34 15.10 17.38 26.08 45.85 57.37 82.02 95.44 127.26 139.98
The length of flanged or plain ended concrete R.C.C.Pipes, steel Cylinders, R.C. pipes and C.I. Pipes shall be measured overall. The length of socketed pipes shall be measured exclusive of internal depth of sockets.
1.2.18 1.2.18.1 1.2.18.2 1.2.18.3 1.2.18.4
100 m 100 m 100 m 100 m
14.22 39.10 55.85 78.19
2.09 5.74 8.20 11.47
The length of asbestos cement pipes shall be measured exclusive of internal depth of sockets.
58
Code No. 1 1.3
Description 2 Loading in or unloading cement from the Railway wagon at siding and carrying the same from or into godowns adjacent to the siding, including stacking the same properly in rows upto any height as per direction of Engineer-in-charge, sweeping the wagons and screening the swept cement and filling in bags complete. Loading in or unloading from the Railway wagon as per the direction of Engineer-in-charge. Steel G.I., C.I., R.C.C or C.C. pipes upto 500 mm dia. and similar heavy materials
Unit 3
Rate Rs. 4
Remarks 5
Tonne
25.70
1.4
1.4.1 1.4.2
Tonne
37.65
Tonne
22.90
The rates will be applicable in all casess whether materials are unloaded on or loaded from railway siding or directly unloaded on or loaded from transport
1.4.3
Heavy materials where each piece or bundle, crate or case weighs more than one tonne and R.C.C., C.I. and concrete pipes above 500 mm dia.
No deduction shall be made from carriage rates for such direct unloading or loading. Tonne 50.60
59
SUB HEAD : 2.0
EARTH WORK
61
BASIC RATES (SH: 2.0 EARTH WORK)

Code No 0003 0017 0018 0020 0101 0103 0112 0113 0114 0115 0124 0128 0132 0133 0134 0135 0302 0325 0326 0771 1197 1198 1235 2204 2335 2342 6501 7022 9999 Description Unit Rate Rs. 1,000.00 1,030.00 800.00 6,000.00 138.45 141.60 141.60 135.25 135.25 135.25 141.60 138.45 135.25 135.25 135.25 138.45 29.00 25.00 10.00 19.00 160.00 178.00 30.25 60.81 53.21 5.32 175.00 150.00 1.00
Hire charges of Diesel Road Roller - 8 to 10 tonne Hire and running charges of tipper Hire and running charges of loader. Hydraulic Excavator (3D) with driver and fuel. Bhisti Blacksmith 2nd class Carpenter 2nd class Chowkidar Beldar Coolie Mason (brick layer) 2nd class Mate Rock Excavator Rock Breaker Rock Hole Driller Stone Chiseller Safeda ballies 125 mm diameter Blasting powder Blasting fuse (fuse wire) Kerosene oil Second class kail wood in scantling Second class kail wood in planks Diesel oil Carriage of Timber Carriage of Jamuna sand Carriage of solvent/ Diesel. Sand zone V (Jamuna) Chlorpyriphos 20% E.C. / Lindane 20% E.C. Sundries
Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day metre kilogram each litre cudm cudm litre cum cum quintal cum litre L.S.
SUB HEAD 2.0 EARTH WORK
63
2.0 E A R T H W O R K
Code No 2.1 Description Unit Rate Rs.
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth upto 50 m and lift upto 1.5 m, disposed soil to be levelled and neatly dressed : 2.1.1 All kinds of soil 100 sqm 2,073.60
2.2
Earth work in rough excavation, banking excavated earth in layers not exceeding 20 cm in depth, breaking clods watering, rolling each layer with tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and lift upto 1.5 m : 2.2.1 All kinds of soil cum 157.55
2.3
Banking excavated earth in layers not exceeding 20 cm. in depth, breaking clods, watering, rolling each layer with tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m. 2.3.1 All kinds of soil cum cum cum 99.45 1.75 6.45
2.4 2.5 2.6
Deduct for not rolling with power roller of minimum 8 tonnes for banking excavated earth in layers not exceeding 20 cm in depth. Deduct for not watering the excavated earth for banking Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. 2.6.1 All kinds of soil
cum
101.85
2.7
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed. 2.7.1 2.7.2 2.7.3 Ordinary rock Hard rock (requiring blasting) Hard rock (blasting prohibited) cum cum cum 152.60 252.20 325.25
2.8
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
SUBHEAD -2.0 EARTH WORK
64
Code No
Description
Unit
Rate Rs. 103.40
2.8.1 2.9
All kinds of soil.
cum
Excavation work by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m. 2.9.1 2.9.2 2.9.3 Ordinary rock Hard rock (requiring blasting) Hard rock (blasting prohibited) cum cum cum 162.65 272.95 332.45
2.10
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : 2.10.1 2.10.1.1 2.10.1.2 2.10.1.3 All kinds of soil Pipes, cables etc, not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm. metre metre metre 70.45 115.05 179.65
2.11
Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth upto 1.5 metre). Extra for excavating trenches for pipes, cables, etc, in all kinds of soil for depth exceeding 3 m in depth, but not exceeding 4.5 m. (Rate is over corresponding basic item for depth upto 1.5 metre.) Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth including consolidating each deposited layers by ramming, watering etc. stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50m : 2.13.1 2.13.1.1 2.13.1.2 2.13.1.3 2.13.2 2.13.2.1 Ordinary rock : Pipes, cables etc. not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia. Pipes, cables exceeding 300 mm dia but not exceeding 600mm dia Hard rock (requiring blasting) Pipes, cables etc. not exceeding 80 mm dia.
metre
133 %
2.12
metre
340%
2.13
metre metre metre
100.20 248.10 285.50
metre
152.75
65
Code No
Description
Unit
Rate Rs.
2.13.2.2 2.13.2.3 2.13.3 2.13.3.1 2.13.3.2 2.13.3.3 2.14
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia Hard rock (blasting prohibited) Pipes, cables etc. not exceeding 80 mm dia. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia.
metre metre
378.20 435.25
metre metre metre
180.85 447.85 515.35
Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 1.5 m in depth but not exceeding 3 m. (Rate is over corresponding basic item for depth upto 1.5 metre.) Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 3m in depth but not exceeding 4.5 m. (Rate is over corresponding basic item for depth upto 1.5 metre.) Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered). 2.16.1 2.16.2 2.16.3 Depth not exceeding 1.5 m. Depth exceeding 1.5 m but not exceeding 3 m. Depth exceeding 3 m but not exceeding 4.5 m.
metre
104%
2.15
metre
259%
2.16
sqm sqm sqm
69.80 72.20 77.60
2.17
Close timbering in case of shafts, wells, cesspits, manholes and the like including strutting, shoring and packing cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered). 2.17.1 2.17.2 2.17.3 Depth not exceeding 1.5 m. Depth exceeding 1.5 m but not exceeding 3 m. Depth exceeding 3 m but not exceeding 4.5 m. sqm sqm sqm 71.60 76.70 82.00
2.18
Close timbering over areas including strutting, shoring and packing, cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered) : 2.18.1 2.18.2 2.18.3 Depth not exceeding 1.5 m. Depth exceeding 1.5 m but not exceeding 3 m. Depth exceeding 3 m but not exceeding 4.5 m. sqm sqm sqm 62.40 65.15 68.15
2.19
Extra for planking, strutting and packing materials for cavities (in close timbering) if required to be left permanently in position. (Face area of timber permanently left to be measured). Open timbering in trenches including strutting and shoring complete (measurements to be taken of the face area timbered): 2.20.1 Depth not exceeding 1.5 m.
sqm
923.05
2.20
sqm
35.20
66
Code No
Description
Unit
Rate Rs. 36.70 39.10
2.20.2 2.20.3 2.21
Depth exceeding 1.5 m but not exceeding 3 m. Depth exceeding 3 m but not exceeding 4.5 m.
sqm sqm
Open timbering in case of shafts, wells, cesspits, manholes and the like including strutting and shoring complete (Measurements to be taken of the face area timbered): 2.21.1 2.21.2 2.21.3 Depth not exceeding 1.5 m. Depth exceeding 1.5 m but not exceeding 3 m. Depth exceeding 3 m but not exceeding 4.5 m. sqm sqm sqm 30.40 32.75 35.80
2.22
Open timbering over areas including strutting, shoring etc. complete. (Measurements to be taken of the face area timbered): 2.22.1 2.22.2 2.22.3 Depth not exceeding 1.5 m. Depth exceeding 1.5 m but not exceeding 3 m. Depth exceeding 3 m but not exceeding 4.5 m. sqm sqm sqm 21.50 23.20 25.80
2.23
Extra for planking and strutting in open timbering if required to be left permanently in position. (Face area of the timber permanently left to be measured). Extra rates for quantities of works, executed: 2.24.1 2.24.2 In or under water and/or liquid mud, including pumping out water as required. In or under foul position, including pumping out water as required.
sqm
463.85
2.24
metre depth metre depth
20% 25%
Note for item no. 2.24:- The extra percentage rate is applicable in respect of each item but limited to quantities of work executed in these difficult conditions. The unit, namely, metre depth, to be considered for payment, shall be the depth measured from the sub soil water level upto the centre of gravity of the quantity executed in difficult conditions. The depth shall be reckoned correct to 0.1 metre, 0.05 metre or more shall be taken as 0.1 metre and less than 0.05 metre ignored. 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Extra for every additional lift of 1.5 m or part thereof in. 2.26.1 2.26.2 2.27 2.28 All kinds of soil. Ordinary or hard rock. cum cum cum 18.90 33.85 301.50
cum
45.70
2.26
Supplying and filling in plinth with Jamuna sand under floors including, watering, ramming consolidating and dressing complete. Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m. 2.28.1 All kinds of soil.
100sqm
512.10
67
Code No 2.29
Description
Unit
Rate Rs.
Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same. 2.29.1 All kinds of soil. 100sqm 512.40
2.30
Excavating holes upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil; as directed within a lead of 50 m and lift upto 1.5 m. 2.30.1 2.30.2 2.30.3 2.30.4 All kinds of soil. Ordinary rock Hard rock (requiring blasting) Hard rock (blasting prohibited) each each each each 54.30 82.85 152.10 181.85
2.31
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared. Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches removing the roots and stacking of serviceable material and disposal of unserviceable material. 2.33.1 2.33.2 2.33.3 2.33.4 Beyond 30 cm girth upto and including 60 cm girth Beyond 60 cm girth upto and including 120 cm girth Beyond 120 cm girth upto and including 240 cm girth Above 240 cm girth
100sqm 100sqm
263.90 135.65
2.32 2.33
each each each each
81.70 359.80 1,658.85 3,330.20
2.34
Supplying chemical emulsion in sealed containers including delivery as specified. 2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% litre 174.30
2.35
Diluting and injecting chemical emulsion for POSTCONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : 2.35.1 Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall & rodding etc. complete: With Chlorpyriphos/ concentration. Lindane E.C. 20% with 1% sqm 6.75
2.35.1.1 2.35.2
Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. With Chlorpyriphos/ Lindane E.C. 20% with 1% sqm 10.45
2.35.2.1
68
Code No
Description
Unit
Rate Rs.
concentration. 2.35.3 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor : With Chlorpyriphos/Lindane concentration. E.C. 20% with 1% sqm 48.70
2.35.3.1 2.35.4
Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole : With Chlorpyriphos/Lindane concentration. E.C. 20% with 1% metre 7.60
2.35.4.1 2.35.5
Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same.
metre cum
79.80 13.85
2.36
Deduct for disposed soil not levelled and neatly dressed (against Item No. 2.6,&2.7)
69
SUB HEAD : 3.0
MORTARS
71
BASIC RATES (SH:3.0 MORTAR)

Code No 0101 0114 0367 0368 0784 0811 0982 0983 1159 2203 2209 2261 2267 2268 9999 Description Unit Rate Rs. 138.45 135.25 4,500.00 9,700.00 800.00 20.00 600.00 320.00 700.00 53.21 47.29 53.21 53.21 53.21 1.00
Bhisti Beldar Portland Cement White Cement Marble dust/ powder Mud (dry) Coarse sand (zone III) Fine sand (zone IV) Stone dust Carriage of Coarse sand Carriage of Cement Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna sand) Carriage of Stone dust Carriage of Marble dust and marble chips Sundries
Day Day tonne tonne cum cum cum cum cum cum tonne cum cum cum L.S.
SUB HEAD 3.0 MORTAR
73
3.0 MORTAR
Note : These rates are exclusive of water charges, overheads and contractors profit. Code No 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15 3.16 3.17 3.18 Description Cement Mortar 1:1 (1 cement : 1 fine sand) Cement mortar 1:2 (1 cement : 2 fine sand). Cement mortar 1:3 (1 cement : 3 fine sand). Cement mortar 1:4 (1 cement : 4 fine sand). Cement mortar 1:5 (1 cement : 5 fine sand). Cement mortar 1:6 (1 cement : 6 fine sand). Cement mortar 1:2 (1 cement : 2 coarse sand). Cement mortar 1:3 (1 cement : 3 coarse sand). Cement mortar 1:4 (1 cement : 4 coarse sand). Cement mortar 1:5 (1 cement : 5 coarse sand). Cement mortar 1:6 (1 cement : 6 coarse sand). Cement mortar 1:2 (1 cement : 2 stone dust). Cement mortar 1:2 (1 cement : 2 marble dust). Cement mortar 1:5 (1 cement : 5 marble dust). White cement mortar 1:2 (1 white cement : 2 marble dust). White cement mortar 1:3 (1 white cement : 3 marble dust). White cement mortar 1:5 (1 white cement : 5 marble dust). Mud mortar Unit cum cum cum cum cum cum cum cum cum cum cum cum cum cum cum cum cum cum Rate Rs. 5,055.70 3,598.25 2,870.00 2,278.85 1,960.55 1,687.70 3,864.25 3,169.60 2,578.45 2,260.15 1,987.30 3,959.25 4,054.25 2,474.15 7,590.25 6,035.60 4,086.15 156.85
SUBHEAD -3.0 MORTAR
74
SUB HEAD : 4.0
CONCRETE WORK
75
BASIC RATES (SH: 4.0 CONCRETE WORK)

Code No 0002 0011 0012 0101 0114 0115 0116 0123 0124 0131 0155 0287 0293 0295 0296 0297 0309 0367 0370 0771 0982 0983 1213 1980 2202 2203 2206 2209 2211 2260 2261 2262 7319 Description Unit Rate Rs. 400.00 300.00 200.00 138.45 135.25 135.25 151.50 151.50 141.60 141.60 146.55 360.00 650.00 700.00 700.00 700.00 22,500.00 4,500.00 300.00 19.00 600.00 320.00 20.00 6.00 53.21 53.21 57.83 47.29 53.21 57.83 53.21 53.21 980.00
Hire charges of Concrete Mixer 0.14 cubic metre Hire charges of Pump set of capacity 4000 litres/hour. Vibrator(Needle type 40mm) Bhisti Beldar Coolie Fitter (grade 1) Mason (brick layer) 1st class Mason (brick layer) 2nd class Painter Mason (average) Brick Aggregate (Single size) : 40 mm nominal size Stone Aggregate (Single size) : 40 mm nominal size Stone Aggregate (Single size) : 20 mm nominal size Stone Aggregate (Single size) : 12.5 mm nominal size Stone Aggregate (Single size) : 10 mm nominal size Paving bitumen S-90 of approved quality Portland Cement Coal (steam) Kerosene oil Coarse sand (zone III) Fine sand (zone IV) Water proofing materials Fly ash Carriage of Stone aggregate below 40 mm nominal size Carriage of Coarse sand Carriage of Stone aggregate 40 mm nominal size and above Carriage of Cement Carriage of Tar bitumen Carriage of Brick aggregate Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna sand) Carriage of Fly ash Wall form panel 1250x500 mm
Day Day Day Day Day Day Day Day Day Day Day cum cum cum cum cum tonne tonne quintal litre cum cum kilogram cum cum cum cum tonne tonne cum cum cum each
SUB HEAD 4.0 CONCRETE WORK
77
Code No 7326 7327 7328 7329 7330 7331 7332 7333 7334 9999
Description Corner angle 45x45x5 mm 1.50 m long 100 mm channel shoulder 2.5 m long Double clip ( bridge clip) Single clip M.S. tube 40 mm dia Wall form panel 1250x450 mm Corner angle 45x45x5 m 2.50 m long Column clamp 450x1070 m Prop 2 m ( 2-3.5m) Sundries
Unit each each each each metre each each each each L.S.
Rate Rs. 280.00 1,000.00 75.00 60.00 225.00 900.00 275.00 1,100.00 750.00 1.00
SUB HEAD 4.0 CONCRETE WORK
78
4.0 CONCRETE WORK

Code No Description Unit Rate Rs.
CEMENT CONCRETE (CAST IN- SITU) 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 4.1.1 4.1.2 4.1.3 4.1.4 4.1.5 4.1.6 4.1.7 4.1.8 4.1.9 4.1.10 4.1.11 4.1.12 1:1:2 (1 Cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size) 1:1:3 (1 Cement: 1 coarse sand: 3 graded stone aggregate 20 mm nominal size). 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size). 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size). 1:3:6 (1 Cement : 3 fine sand : 6 graded stone aggregate 40 mm nominal size). 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). 1:4:8 (1 cement : 4 fine sand : 8 graded stone aggregate 40 mm nominal size) 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) 1:2:3:9 (1 ordinary portland cement : 2 Fly ash : 3 coarse sand : 9 graded stone aggregate 40 mm nominal size). 1:2:4:11 (1 ordinary portland cement : 2 fly ash : 4 coarse sand : 11 graded stone aggregate 40 mm nominal size) cum cum cum cum cum cum cum cum cum cum cum 4,738.95 3,629.80 3,257.45 3,194.10 2,791.05 2,713.05 2,560.20 2,449.00 2,296.15 2,237.75 2,079.60
cum
2,388.45
4.1.13
cum
2,154.45
4.2
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc. up to floor five level, excluding the cost of centering, shuttering and finishing : 4.2.1 1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size) cum 5,060.60
SUBHEAD -4.0 CONCRETE WORK
79
Code No
Description
Unit
Rate Rs.
4.2.2 4.2.3 4.2.4 4.2.5 4.2.6 4.2.7 4.3
1:1:3 (1 cement:1 coarse aggregate 20 mm nominal size).
sand:3 graded
stone cum cum cum cum cum cum 3,951.45 3,579.10 3,515.75 3,112.70 3,034.70 2,881.85
1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size). 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size). 1:3:6 (1 cement : 3 fine sand : 6 graded stone aggregate 40 mm nominal size).
Centering and shuttering including strutting, propping etc. and removal of form work for : 4.3.1 4.3.2 Foundations, footings, bases for columns. Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets etc. Columns, piers, abutments, pillars, posts and struts. sqm 119.25
sqm sqm
180.40 238.40
4.3.3 4.4
Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing. 4.4.1 4.4.2 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). cum cum 3,257.45 2,791.05
CEMENT CONCRETE (PRE-CAST) 4.5 Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc. including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 Cement : 3 fine sand) on exposed surfaces complete. 4.5.1 4.5.2 4.6 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). cum cum 4,814.35 4,347.95
Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand) including the cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 cement : 3 fine sand) on exposed
80
Code No
Description
Unit
Rate Rs.
surfaces complete. 4.6.1 4.7 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). cum 4,115.15
Providing and fixing up to floor five level precast cement concrete solid block including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 cement : 3 fine sand) on exposed surfaces complete : 4.7.1 4.7.2 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). cum cum 5,561.90 5095.50
4.8
Providing and fixing up to floor five level precast cement concrete hollow block including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 cement : 3 fine sand) on exposed surfaces complete : 4.8.1 4.8.2 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). cum cum 4,840.40 4,625.80
4.9
Precasting and placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe Sleeve 50 mm dia 300 mm long in the Bollard and M.S. Pipes 40 mm dia and 450 mm long with 150x150x6mm M.S. plate welded at bottom and embedded 150mm in cement concrete 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including necessary excavation of size 250x250x450mm deep for the same in bitumen/concrete pavement at specified spacing. DAMP- PROOF COURSE
each
324.70
4.10
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size). Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). Extra for providing and mixing water proofing material in cement concrete work @ 1 kg per 50kg of cement. Applying a coat of residual petroleum bitumen of penetration 80/100 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
sqm
144.15
4.11
sqm per 50 kg cement
178.05 27.45
4.12 4.13
sqm
58.60
81
Code No
Description
Unit
Rate Rs.
MISCELLANEOUS 4.14 4.15 Extra for concrete work in superstructure above floor V level for each four floors or part thereof. Extra for laying concrete in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete. Note for item No. 4.15 :- The quantity will be calculated by multiplying the depth measured from the sub-soil water level up to centre of gravity of concrete under sub-soil water level with quantity of concrete in cum executed under sub-soil water. The depth of centre of gravity shall be reckoned correct to 0.1m, 0.05m or more shall be taken as 0.1m and less than 0.05m ignored. 4.16 4.17 Extra for laying concrete in or under foul positions. Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth Cum 69.65 sqm Cum per meter depth 235.65
180.75
sqm
222.65
82
SUB HEAD : 5.0
REINFORCED CEMENT CONCRETE
83
BASIC RATES (SH: 5.0 REINFORCED CEMENT CONCRETE)

Code No 0002 0004 0009 0011 0012 0029 0101 0102 0103 0112 0114 0115 0116 0123 0124 0126 0128 0155 0236 0295 0297 0302 0309 0313 0314 0316 0339 0367 0370 0639 0768 Description Unit Rate Rs. 400.00 200.00 80.00 300.00 200.00 18.00 138.45 151.50 141.60 141.60 135.25 135.25 151.50 151.50 141.60 151.50 138.45 146.55 180.00 700.00 700.00 29.00 22,500.00 25,000.00 20.00 28.00 279.00 4,500.00 300.00 15.00 145.00
Hire charges of Concrete Mixer 0.14 cubic metre Production cost of concrete by batch mix plant. Pumping charges of concrete including Hire charges of pump, piping work & accessories etc. Hire charges of Pump set of capacity 4000 litres/hour. Vibrator(Needle type 40mm) Carriage of concrete by transit mixer. Bhisti Blacksmith 1st class Blacksmith 2nd class Carpenter 2nd class Beldar Coolie Fitter (grade 1) Mason (brick layer) 1st class Mason (brick layer) 2nd class Mason (for ornamental stone work) 1st class Mate Mason (average) Non - Asbestos multi purpose fibre cement board 6mm thick. Stone Aggregate (Single size) : 20 mm nominal size Stone Aggregate (Single size) : 10 mm nominal size Safeda ballies 125 mm diameter Paving bitumen S-90 of approved quality Blown type petroleum bitumen of penetration 85/25 of approved quality Bitumen hot sealing compound : grade A Bitumen solution primer of approved quality Flame retardant face insulating, Impregnated fibre board 12 mm thick Portland Cement Coal (steam) Bright finished or black enameled mild steel screws 25 mm Cement Concrete Jali 50 mm thick
Day cum cum Day Day km/ cum Day Day Day Day Day Day Day Day Day Day Day Day sqm cum cum metre tonne tonne kilogram litre sqm tonne quintal 100 Nos sqm
SUB HEAD 5.0 REINFORCED CEMENT CONCRETE
85
Code No 0769 0770 0967 0982 0983 0992 1004 1005 1015 1021 1034 1197 1198 1224 1225 2200 2202 2203 2204 2205 2209 2211 2261 2273 2302 2391 2392 2447 7318 7319 7320 7321 7322 7323
Description Cement Concrete Jali 40 mm thick Cement Concrete Jali 25 mm thick Copper plate Coarse sand (zone III) Fine sand (zone IV) Galvanised steel plain sheets Average rate of Mild steel round bars for reinforcements Twisted steel / deformed bars Mild steel expanded metal 20x60 mm strands Hard drawn steel wire fabric Bolts and nuts upto 300 mm in length Second class kail wood in scantling Second class kail wood in planks Hard drawn steel wire Mild steel flat strap fitting Carriage of steam coal Carriage of Stone aggregate below 40 mm nominal size Carriage of Coarse sand Carriage of Timber Carriage of Steel Carriage of Cement Carriage of Tar bitumen Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna sand) Carriage of A.C.sheet and accessories Carriage of G.I.sheet and accessories Strips-Aluminium fluted 3.15mm thick and 150mm wide Strips Aluminium fluted 3.15mm thick and 200mm wide metre Hollock ballies 125 mm diameter Plasticizer / super plasticizer Wall form panel 1250x500 mm Tie bolt 12 mm dia 100 mm length Tie bolt 12 mm dia 150 mm length Tie bolt 20 mm dia 150 mm length Tie bolt 20 mm dia 225 mm length
Unit sqm sqm kilogram cum cum quintal quintal quintal sqm sqm quintal cudm cudm quintal quintal tonne cum cum cum tonne tonne tonne cum tonne tonne metre Metre metre kilogram each each each each each
Rate Rs. 115.00 92.00 195.00 600.00 320.00 3,450.00 3,075.00 3,175.00 200.00 310.00 4,300.00 160.00 178.00 3,100.00 2,900.00 60.81 53.21 53.21 60.81 47.29 47.29 53.21 53.21 47.29 47.29 216.00 288.00 27.00 30.00 980.00 31.00 29.00 57.00 72.00
86
Code No 7324 7325 7326 7327 7328 7329 7330 7331 7332 7333 7334 7342 7343 7344 7345 7346 8659 9999
Description Spring coil 12 mm Plastic cone 12 mm dia Corner angle 45x45x5 mm 1.50 m long 100 mm channel shoulder 2.5 m long Double clip ( bridge clip) Single clip M.S. tube 40 mm dia Wall form panel 1250x450 mm Corner angle 45x45x5 m 2.50 m long Column clamp 450x1070 m Prop 2 m ( 2-3.5m) Adjustable span ESO+SI (2.35-3.40) Adjustable telescopic prop 3 m (2.02-3.75 m) Beam clamp 300-380 mm (450-1070 mm) Prop 4 m Double coupler Water proof ply 12mm thick. Sundries
Unit each each each each each each metre each each each each each each each set each each sqm L.S.
Rate Rs. 10.00 12.00 280.00 1,000.00 75.00 60.00 225.00 900.00 275.00 1,100.00 750.00 1,600.00 1,000.00 375.00 1,030.00 45.00 572.00 1.00
87
5.0 REINFORCED CEMENT CONCRETE

CAST-IN-SITU 5.1 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 5.1.1 5.1.2 5.1.3 5.2 1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size). 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cum cum cum 4,841.15 3,732.00 3,359.60
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement : 5.2.1 5.2.2 5.2.3 1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). cum cum cum 5,201.50 4,092.35 3,720.00
5.3
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). Providing and laying up to floor five level reinforced cement concrete in kerbs, steps and the like excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). Reinforced cement concrete work in arches, archribs, domes, vaults, shells, folded plate and roofs having slope more than 15 up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). Reinforced cement concrete work in chimneys, shafts, up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
cum
3,673.85
5.4
cum
3,502.85
5.5
cum
3,545.90
5.6
cum
3,760.85
SUBHEAD -5.0 REINFORCED CEMENT CONCRETE
88
Code No 5.7
Description
Unit
Rate Rs.
Reinforced cement concrete work in well-steining excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1:3 (1 cement : 1 coarse sand : 3 graded stone aggregate 20mm nominal size). FORM WORK
cum
3,270.00
5.8
cum
3928.75
5.9
Centering and shuttering including strutting, propping etc. and removal of form for : 5.9.1 5.9.2 5.9.3 5.9.4 5.9.5 5.9.6 5.9.7 5.9.8 5.9.9 5.9.10 5.9.11 5.9.12 5.9.13 5.9.14 5.9.15 Foundations, footings, bases of columns, etc. for mass concrete. Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. Suspended floors, roofs, landings, balconies and access platform. Shelves (Cast in situ) Lintels, beams, plinth beams, girders, bressumers and cantilevers. Columns, Pillars, Piers, Abutments, Posts and Struts. Stairs, (excluding landings) except spiral-staircases. Spiral staircases (including landing). Arches, domes, vaults up to 6 m span Extra for arches, domes, vaults exceeding 6 m span Chimneys and shafts Well steining Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards. Extra for shuttering in circular work (20% of respective centering and shuttering items). Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like. Edges of slabs and breaks in floors and walls. Under 20 cm wide Above 20 cm wide Cornices and mouldings metre sqm sqm 61.10 278.25 323.00 sqm sqm sqm sqm sqm sqm sqm sqm sqm sqm sqm sqm sqm sqm 119.25 180.40 187.35 187.35 162.65 238.40 204.00 182.70 514.70 259.60 180.40 326.50 285.55 20.00%
sqm
119.25
5.9.16 5.9.16.1 5.9.16.2 5.9.17
89
Code No
Description
Unit
Rate Rs.
5.9.18
Small surfaces such as cantilever ends, brackets and ends of steps, caps and bases to pilasters and columns and the like. Weather shade, Chajjas, corbels etc., including edges. Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12mm thick. Lintels, beams, plinth beams, girders, bressumers and cantilevers. with water proof ply 12mm thick.
sqm sqm sqm sqm
246.95 329.80 319.10 916.70
5.9.19 5.9.20 5.9.21 5.10
Providing and fixing tie bolt, spring coil and plastic cone in wall shuttering complete as per the direction of Engineer-in-charge 5.10.1 5.10.2 5.10.3 5.10.4 12 mm dia. & 100 mm length. 12 mm dia. & 150 mm length. 20 mm dia. & 150 mm length. 20 mm dia.& 225 mm length. each set each set each set each set 89.00 101.80 119.20 136.60
5.11
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured) 5.11.1 Suspended floors, roofs, landing, balconies (Plan area to be measured). beams and sqm 106.20
PRE CAST R.C.C. 5.12 Providing, hoisting and fixing up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like including the cost of required centering, shuttering, finishing smooth with 6 mm thick cement plaster 1:3 (1 cement : 3 fine sand) on exposed surfaces complete but excluding cost of reinforcement with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size). Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in small lintels not exceeding 1.5m clear span up to floor five level including the cost of required centering, shuttering and finishing smooth with 6 mm thick cement plaster 1:3 (1 cement : 3 fine sand) on exposed surfaces but excluding the cost of reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in mouldings as in cornices, windows sills etc. including setting in cement mortar 1:3 (1 cement : 3 coarse sand) cost of required centering, shuttering and finishing smooth with 6 mm thick cement plaster 1:3 (1 cement : 3 fine sand) on exposed surfaces complete but excluding the cost of
cum
4,882.25
5.13
cum
6,002.80
5.14
cum
6,725.35
90
Code No
Description
Unit
Rate Rs.
reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). 5.15 Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in lintels, beams and bressumers including setting in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering and shuttering and finishing smooth with 6 mm thick cement plaster 1:3 (1 cement : 3 fine sand) on exposed surfaces but excluding the cost of reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in shelves including setting in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but excluding the cost of reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size). Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in vertical & horizontal fins individually or forming box louvers setting in cement mortar 1:2 (1 cement : 2 coarse sand) including the cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 cement : 3 fine sand) on exposed surfaces complete but excluding the cost of reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete excluding plastering of the jambs, sills and soffits. 5.18.1 5.18.2 5.18.3 50 mm thick 40 mm thick 25 mm thick sqm sqm sqm 359.20 304.05 277.35
cum
5,243.25
5.16
cum
6,840.10
5.17
cum
6,745.50
5.18
ENCASING ROLLED STEEL SECTION 5.19 Encasing rolled steel sections, in beams and columns, with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5mm nominal size) including centering and shuttering complete but excluding cost of reinforcement. Encasing rolled steel section in grillages with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5mm nominal size) including centering and shuttering but excluding cost of expanded metal and hangers.
cum
5045.95
5.20
cum
3448.90
91
Code No 5.21
Description
Unit
Rate Rs.
Extra for providing and fixing expanded metal mesh of size 20x60mm and strands 3.25mm wide 1.6mm thick weighing 3.64 kg. per sqm. for encasing of rolled steel sections in beams, columns and grillages excluding cost of hangers. STEEL REINFORCEMENT
sqm
255.40
5.22
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. 5.22.1 5.22.2 5.22.3 5.22.4 5.22.5 5.22.6 Mild steel and Medium Tensile steel bars. Hard drawn steel wire Cold twisted bars Hot rolled deformed bars Hard drawn steel wire fabric Thermo-Mechanically Treated bars. kilogram kilogram kilogram kilogram kilogram kilogram 41.50 41.50 42.70 42.70 52.00 42.70
MISCELLANEOUS 5.23 Deduct for omitting in R.C.C. work smooth finishing of the exposed surface with 6mm thick cement mortar 1:3 (1 Cement : 3 fine sand) Extra for rendering smooth the top of suspended floors, landings and staircases (treads and risers) with cement mortar 1:2 (1 cement : 2 coarse sand) including a floating coat of neat cement and protecting the surface with a layer of 7.5 cm of earth laid over 15 mm of fine sand in case of suspended floor and bricks laid in mud mortar in case of landings and steps including subsequent removal and cleaning of the same. Providing and fixing in position copper plate as per design for expansion joints. Providing and filling in position, blown bitumen in expansion joints.
sqm
62.15
5.24
sqm kilogram per cm depth per cm width per 100m per cm depth per cm width per 100m per cm depth per per 100m
47.40 231.05
5.25 5.26
348.70
5.27
Providing and filling in position bitumen mix filler of Proportion 80 kg. of hot bitumen, 1 kg. of cement and 0.25 cubicmetre of coarse sand for expansion joints. Providing and fixing in position 12mm thick bitumen impregnated fibre board conforming to IS: 1838 including cost of primer, sealing compound in expansion joints. Providing and fixing sheet covering over expansion joints with iron screws as per design to match the colour / shade of wall treatment. 5.29.1 Non-asbestos fibre cement board 6 mm thick as per IS: 14862.
98.85
5.28
334.55
5.29
92
Code No
Description
Unit
Rate Rs. 69.90 93.80
5.29.1.1 5.29.1.2 5.29.2 5.29.2.1 5.29.2.2 5.30 5.31
150mm wide. 200mm wide. Aluminium fluted strips 3.15mm thick. 150 mm wide. 200 mm wide.
metre metre
metre metre metre
276.80 368.40 11.95
Add or deduct for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. Extra for laying reinforced cement concrete in or under water and/ or liquid mud including cost of pumping or bailing out water and removing slush etc., complete. Note For Item No. 5.31:- The quantity will be calculated by multiplying the depth measured from the subsoil water level up to the centre of gravity of the R.C.C. under subsoil water with the quantity of R.C.C. in cubic metre executed under subsoil water. The depth of centre of gravity shall be reckoned correct to 0.1m, 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. No extra payment shall be made for placing reinforcement or centering & shuttering under sub sol water conditions.
cum
180.75
5.32
Extra for laying reinforced cement concrete in or under foul positions. DESIGN MIX CONCRETE
cum
69.65
5.33
Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement. including Admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. M-25 grade reinforced cement concrete by using 410kg. of cement per cum of concrete. All work up to floor V level. Add or deduct for providing richer or leaner mixes respectively at all floor levels. 5.34.1 Providing M-30 grade concrete by using 420kg of cement per cum of concrete instead of M-25 grade B.M.C/ R.M.C.. Providing M-35 grade concrete by using 428kg of cement per cum of concrete instead of M-25 grade B.M.C./ R.M.C... Providing M-40 grade concrete by using 435kg of cement per cum of concrete instead of M-25 grade B.M.C./ R.M.C..
cum
4,147.40
5.34
cum
54.55
5.34.2
cum
98.20
5.34.3
cum
136.40
93
Code No 5.35 5.36
Description
Unit
Rate Rs.
Deduct for using less cement than the quantity as provided in the item of batch mix concrete/RMC as arrived as per mix design. Providing and placing in position precast reinforced cement concrete waffle units square or rectangular as per design and shape for floors and roofs in 1:1:3 (1 Cement : 1 coarse sand : 3 graded stone aggregate 10mm nominal size) including flush or deep ruled pointing at joints in Cement mortar 1:2 (1 Cement : 2 Fine sand), making necessary holes of required sizes for carrying through service lines etc., providing steel hooks for lifting etc, form work in precasting, handling, hoisting, centering and erection complete for all floor levels but excluding the cost of reinforcement. Providing and laying in position ready mixed concrete manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead up to 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. M-25 grade Reinforced cement concrete by using 410kg of cement per cum of concrete. All works up to floor V level. Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level for each four floors or part thereof. Extra for carriage of R.M.C. beyond the initial lead of 10km. Note:- Flyash conforming to grade I of IS: 3812 (Part I) may be used as part replacement of OPC provided uniform blending with cement is ensured in accordance with clauses 5.2 and 5.2.1 of 15:456:- 2000 in the items of BMC and RMC.
quintal
528.15
cum
9,683.15
5.37
cum cum cum/ km
4,356.50 92.90 20.90
5.38 5.39
94
SUB HEAD : 6.0
BRICK WORK
95
BASIC RATES (SH: 6.0 BRICK WORK)

Code No 0011 0037 0101 0112 0114 0115 0123 0124 0155 0322 1002 1008 1034 1197 1225 1235 1984 1986 2201 2204 2205 2207 2208 2302 2602 7008 7736 7737 7738 7900 7901 7902 Description Unit Rate Rs. 300.00 5,000.00 138.45 141.60 135.25 135.25 151.50 141.60 146.55 45.00 3,100.00 2,900.00 4,300.00 160.00 2,900.00 30.25 1,950.00 2,700.00 141.88 60.81 47.29 85.13 53.21 47.29 1,900.00 1,412.00 3,550.00 1,792.00 3,083.00 2,050.00 3,233.00 3,200.00
Hire charges of Pump set of capacity 4000 litres/hour. Mobile crane. Bhisti Carpenter 2nd class Beldar Coolie Mason (brick layer) 1st class Mason (brick layer) 2nd class Mason (average) Bitumen felt :Type 3 grade 1 Mild steel round bar 12 mm dia and below Flats upto 10 mm in thickness Bolts and nuts upto 300 mm in length Second class kail wood in scantling Mild steel flat strap fitting Diesel oil F.P.S. bricks tile class designation 100 Modular bricks class designation75 Carriage of Bricks Carriage of Timber Carriage of Steel Carriage of Brick tiles Carriage of Lime Carriage of G.I.sheet and accessories F.P.S. bricks class designation75 F.P.S. clay fly ash bricks class designation 75 Extruded burnt flyash clay sewer bricks conforming to I.S 4885 - 1988 Fly ash lime bricks (FALG Bricks) conforming to I.S. 12894-1989 Calcium Silicate Bricks machine moulded confirming to I.S. 4139 1989 Modular bricks of class designation 75 Machine moulded perforated FPS bricks of class designation 125 Machine moulded modular perforated bricks of class designation 125
Day per day Day Day Day Day Day Day Day sqm quintal quintal quintal 10cudm quintal litre 1000 Nos 1000 Nos 1000 Nos cum tonne 1000 Nos cum tonne 1000 Nos 1000 Nos 1000 Nos 1000 Nos 1000 Nos 1000 Nos 1000 Nos 1000 Nos
SUB HEAD 6.0 BRICK WORK
97
Code No 7903 7904 8655 8656 8657 8658 9999
Description Machine moulded FPS bricks of class designation 125 Machine moulded tile bricks of class designation 125 Autoclaved aerated cement (AAC) blocks. Gypsum panel 666 X 500 X 100 mm size. Bonding plaster for Gypsum panel. Mechanised Autoclaved flyash lime bricks. Sundries
Unit 1000 Nos 1000 Nos cum sqm kg 1000 Nos L.S.
Rate Rs. 2,767.00 2,717.00 1,650.00 544.00 50.00 2,200.00 1.00
SUB HEAD 6.0 BRICK WORK
98
6.0 BRICK WORK

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in: 6.1.1 6.1.2 Cement mortar 1:4 (1 cement : 4 coarse sand) Cement mortar 1:6 (1 cement : 6 coarse sand) cum cum 2,293.40 2,121.75
6.2
Brick work with modular bricks of class designation 75 in foundation and plinth in: 6.2.1 6.2.2 Cement mortar 1:4 (1 cement : 4 coarse sand) Cement Mortar 1:6 (1 cement : 6 coarse sand). cum cum 2,200.25 2,049.20
6.3
Brick work with machine moulded perforated bricks of class designation 125 conforming to IS: 2222 -1991 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) : 6.3.1 6.3.2 With F.P.S. bricks. With Modular bricks. cum cum 3,195.10 3,001.25
6.4
Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level in all shapes and sizes in : 6.4.1 6.4.2 Cement mortar 1:4 (1 cement : 4 coarse sand) Cement mortar 1:6 (1 cement : 6 coarse sand) cum cum 2,601.90 2,463.60
6.5
Extra for brick work in superstructure above floor V level for each four floors or part thereof by mechanical means by lifting material using mobile crane. Extra for forming cavity 5cm to 7.5cm wide in cavity walls with necessary weep and vent holes including use of cores and cost of providing and fixing bitumastic coated M .S. ties 300mm long of 25x3mm section at not less than 3 ties per sqm as per approved design. Providing half brick masonry with F.P.S. bricks of class designation 75 in cement mortar 1:3 (1 Cement : 3 coarse sand) in superstructure for closing cavity 5 to 7.5 cm wide in cavity wall complete with 10 cm / 11.4 cm wide bitumen felt type 3 grade 1. Brick work 7 cm thick with F.P.S. brick of class designation 75 in cement mortar 1:3 (1 cement : 3 coarse sand) in superstructure. Brick work in plain arches in superstructure including centering and shuttering complete for span up to 6 metres with F.P.S. brick of class designation 75 in cement mortar 1:3 (1 cement : 3 coarse sand). Brick work in gauged arches in superstructure in cement mortar 1:3 (1 cement : 3 coarse sand) including centering and shuttering complete, for span up to 6 meters with F.P.S. brick of class designation 75.
cum
190.00
6.6
sqm
47.35
6.7
metre sqm
89.50 214.85
6.8 6.9
cum
3,847.45
6.10
cum
4,490.65
SUBHEAD -6.0 BRICK WORK
99
Code No 6.11
Description
Unit
Rate Rs.
Extra for additional cost of centering for arches exceeding 6m span including all shuttering, bolting, wedging and removal (Area of the soffit to be measured). HALF BRICK MASONRY
sqm
259.60
6.12
Half brick masonry with F.P.S. brick of class designation 75 in foundations and plinth in. 6.12.1 6.12.2 Cement mortar 1:3 (1 cement : 3 coarse sand) cement mortar 1:4 (1 cement : 4 coarse sand) sqm sqm 289.60 270.35
6.13
Half brick masonry with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level. 6.13.1 6.13.2 Cement mortar 1:3 (1 cement :3 coarse sand) Cement mortar 1:4 (1 cement :4 coarse sand) sqm sqm 322.00 302.80
6.14
Extra for half brick masonry in superstructure, above floor V level for every four floors or part thereof by mechanical means by lifting material using mobile crane. Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry (with F.P.S. bricks). BRICK TILE WORK
sqm
16.85
6.15
sqm
47.80
6.16
Tile brick masonry with tile bricks of class designation 100 in foundation and plinth in: 6.16.1 6.16.2 Cement mortar 1:4 (1 cement : 4 coarse sand) Cement mortar 1:6 (1 cement : 6 coarse sand). cum cum 3,552.30 3,277.65
6.17
Tile brick masonry with machine moulded tile bricks of class designation 125 conforming to IS : 2690 (Part I) - 1993 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand). Tile brick masonry with tile bricks of class designation 100 in superstructure above plinth level up to floor V level. in cement mortar 1:6 (1 cement : 6 coarse sand). Extra for tile brick masonry with tile bricks of class designation 100 in superstructure above floor five level for every four floors or part thereof. Tile brick masonry with tile bricks of class designation 100 in plain arch work in superstructure in cement mortar 1:4 (1 cement : 4 coarse sand) including centering and shuttering complete. Tile brick masonry with tile bricks of class designation 100 in gauged arch work in superstructure in cement mortar 1:4 (1 cement : 4 coarse sand) including centering and shuttering complete. Tile brick masonry work 5 cm thick with tile bricks of class designation 100 in cement mortar 1:3 (1 cement : 3 coarse sand) in superstructure.
cum
3,969.85
6.18
cum
3,571.20
6.19
cum
235.65
6.20
cum
4,876.55
6.21
cum
5,484.40 212.10
6.22
sqm
100
Code No
Description
Unit
Rate Rs.
HONEY COMB WORK 6.23 6.24 Honey-comb brick work 10/11.4 cm thick with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand). Extra for laying brick work in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete. NOTE :- The quantity will be calculated by multiplying the depth measured from sub - soil water level up to the centre to gravity of brick work under sub - water with the quantity of brick work in cum executed under the sub - soil water. The depth of centre of gravity shall be reckoned correct to 0.1m, 0.05m or more shall be taken as 0.1 m and less than 0.05m ignored. 6.25 Extra for laying brick work in or under foul position. EXPOSED BRICK WORK 6.26 Brick work with selected F.P.S. bricks of class designation 75 in exposed brick work including making horizontal and vertical grooves 10mm wide 12mm deep complete from ground level up to plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) Brick work with modular bricks of class designation 75 in exposed brick work including making horizontal and vertical grooves 10mm wide 12mm deep complete from ground level up to plinth level in cement mortar 1:6 (1 cement : 6 coarse sand). Brick work with machine moulded modular bricks of class designation 125 in exposed brick work including making horizontal and vertical grooves 10mm wide 12mm deep complete from ground level up to plinth level in cement mortar 1:6 (1 cement : 6 coarse sand). Brick work with machine moudled F.P.S. bricks of class designation 125 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12mm deep complete from ground level up to plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) Brick work with machine moudled perforated F.P.S. bricks of class designation 125 conforming IS : 2222-1991 in exposed brick work including making horizontal and vertical grooves 10mm wide 12 mm deep complete from ground level up to plinth level in cement mortar 1:6 (1 cement : 6 coarse sand). Brick work with machine moulded perforated modular bricks of class designation 125 conforming to IS : 2222 -1991 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12mm deep complete from ground level up to plinth level in cement mortar 1:6 (1 cement : 6 coarse sand). Brick work with clay flyash F.P.S. brick of class designation 75 in superstructure above plinth level up to floor five level in : 6.32.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 2,306.35 cum 69.65 sqm 203.55
cum
180.75
cum
2,165.60
6.27
cum
2,065.10
6.28
cum
2,432.75
6.29
cum
2,635.10
6.30
cum
2,902.45
6.31
cum
2,715.60
6.32
101
Code No
Description
Unit
Rate Rs. 2,134.70
6.32.2 6.33
Cement mortar 1:6 (1 cement : 6 coarse sand)
cum
Extra for exposed brick work/ clay flyash brick work in superstructure above floor five level, for each four floors or part thereof. Brick work with modular fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, class designation 100 average compressive strength in super structure above plinth level up to floor V level in : 6.34.1 6.34.2 Cement mortar 1:4 (1 cement : 4 coarse sand) Cement mortar 1:6 (1 cement : 6 Coarse sand)
cum
235.65
6.34
cum cum
2,434.35 2,283.30
6.35
Brick work with modular calcium silicate bricks machine moulded conforming to IS:4139-1989, class designation 100 average compressive strength in super structure above plinth level up to floor V level in : 6.35.1 6.35.2 Cement mortar 1:4 (1 cement : 4 coarse sand) Cement mortar 1:6 (1 cement : 6 Coarse sand) cum cum 3,164.60 3,013.55
6.36
Brick work with modular extruded brunt fly ash clay sewer bricks (Conforming to IS: 4885 - 1988) in foundation and plinth : 6.36.1 Cement Mortar 1:4 ( 1 cement : 4 coarse sand) cum 3,048.75
6.37
Brick work with modular extruded brunt fly ash clay sewer bricks (conforming to IS : 4885-1988) in arches in foundation and plinth in cement mortar 1:3 ( 1 cement : 3 fine sand). Providing and laying autoclaved aerated cement blocks masonry with 100mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ) The rate includes providing and placing in position 2 Nos. 6 mm dia M.S. bars at every third course of masonry work. Extra for AAC block masonry in superstructure above floor V level for every four floors or part there of. Providing and laying Gypsum panel partitions 100mm thick with water proof Gypsum panels of size 666x500x100mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturers specifications in superstructure above plinth level up to floor V level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2 Extra for Gypsum panel Partitions in superstructure above floor V level for every four floors or part thereof. Brick work with mechanized autoclaved flyash lime bricks conforming to IS: 12894 :2002 of class designation 100 in superstructure above plinth level up to floor V level in. 6.42.1 6.42.2 Cement mortar 1:4 (1 cement :4 coarse sand) Cement mortar 1:6 (1 cement :6 coarse sand).
cum
4,550.30
6.38
cum cum
3,348.40 235.65
6.39 6.40
sqm sqm
803.10 27.20
6.41 6.42
cum cum cum
2,465.55 2,293.90
6.43
Extra for mechanized autoclave flyash lime bricks conforming to
102
Code No
Description
Unit
Rate Rs.
IS: 12894- 1990 of class designation 100 in superstructure above floor V level for each four floors or part thereof. 6.44 Brick edging 7cm wide 11.4cm. deep to plinth protection with bricks of class designation 75 including grouting with cement mortar 1:4 (1 cement : 4 fine sand)
235.65
metre
16.25
103
SUB HEAD : 7.0
STONE WORK
105
BASIC RATES (SH: 7.0 STONE WORK)

Code No 0011 0100 0101 0102 0103 0112 0114 0115 0116 0123 0124 0125 0126 0139 0367 0373 0873 1002 1007 1034 1154 1157 1160 1161 1163 1164 1165 1169 1197 1215 1225 1237 Description Unit Rate Rs. 300.00 138.45 138.45 151.50 141.60 141.60 135.25 135.25 151.50 151.50 141.60 141.60 151.50 138.45 4,500.00 53.00 7.50 3,100.00 3,100.00 4,300.00 970.00 332.00 45.00 50.00 256.00 120.00 140.00 150.00 160.00 1.00 2,900.00 6.00
Hire charges of Pumpset of capacity 4000 litres/hour. Bandhani Bhisti Blacksmith 1st class Blacksmith 2nd class Carpenter 2nd class Beldar Coolie Fitter (grade 1) Mason (brick layer) 1st class Mason (brick layer) 2nd class Mason (for plain stone work) 2nd class) Mason (for ornamental stone work) 1st class Skilled Beldar (for floor rubbing etc.) Portland Cement Cramp Gun metal 25x6x300 mm Copper pins 6 mm dia 7.5 cm long Mild steel round bar 12 mm dia and below Structural steel such as tees, angles channels and R.S. joists Bolts and nuts up to 300 mm in length Through and bond stone Stone for masonry work Red sand stone block White sand stone block White sand stone slab 75 mm thick (un-dressed) Red sand stone slab 40 mm thick (un-dressed) White sand stone slab 40 mm thick (un-dressed) Kota stone slab 25mm thick (rough chiseled) Second class kail wood in scantling Welding by electric plant Mild steel flat strap fitting Cutting marble or sand stone slab up to 50 mm thick by mechanical device
Day Day Day Day Day Day Day Day Day Day Day Day Day Day tonne each each quintal quintal quintal Nos cum 10 cudm 10 cudm sqm sqm sqm Sq.m. 10 cudm cm quintal metre
SUB HEAD 7.0 STONE WORK
107
Code No 2204 2215 2216 2302 2750 4009 7339 7439 8683 8684 8698 9999
Description Carriage of Timber Carriage of Soling stone & masonary stone Carriage of Stone blocks white & red sand stone & kota stone slab Carriage of G.I.sheet and accessories 8 mm thick granite stone tiles (mirror polished of all shades) Mild steel tubes hot finished welded type Stainless steel cramp 8mm thick (mirror polished tiles machine cut edge) Raj Nagar white Red sand stone gang saw cut 30mm thick. White sand stone gang saw cut 30mm thick. Stainless steel cramps with nuts, bolts and washer for dry stone cladding . Sundries
Unit cum cum tonne tonne sqm kilogram kilogram sqm sqm sqm each L.S.
Rate Rs. 60.81 62.60 47.29 47.29 555.00 38.00 280.00 430.00 325.00 360.00 200.00 1.00
SUB HEAD 7.0 STONE WORK
108
7.0 STONE WORK

RANDOM RUBBLE MASONRY 7.1 Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with : 7.1.1 7.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 1,838.90
Extra for random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at window sills, ceiling level and the like. Extra for random rubble masonry with hard stone in superstructure above floor V level for every four floors or part thereof Extra for random rubble masonry with hard stone in : 7.4.1 7.4.2 Square or rectangular pillars Circular pillars.
cum
372.35
7.3
cum
314.20
7.4
cum cum cum
137.80 421.45 173.50
7.5
Extra for random rubble masonry with hard stone curved on plan for a mean radius not exceeding 6 m. COURSED RUBBLE MASONRY
7.6
Coursed rubble masonry (first sort) with hard stone in foundation and plinth with : 7.6.1 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 2,022.70
7.7
Coursed rubble masonry (second sort) with hard stone in foundation & plinth with : 7.7.1 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 1,913.10
7.8
Extra for coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor five level. Extra for coursed rubble masonry with hard stone (first or second sort) in superstructure above floor V level for every four floors or part thereof. Extra for coursed rubble masonry with hard stone (first or second sort) in : 7.10.1 7.10.2 Square or rectangular pillars Circular pillars.
cum
361.50
7.9
cum
314.20
7.10
cum cum
152.60 476.30
7.11
Extra for coursed rubble masonry with hard stone (first or second sort) curved on plan for a mean radius not exceeding 6 m.
cum
187.95
SUBHEAD -7.0 STONE WORK
109
Code No
Description
Unit
Rate Rs.
ASHLAR MASONRY 7.12 Stone work in plain ashlar in super structure upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : 7.12.1 7.12.1.1 7.12.1.2 7.12.2 7.12.2.1 7.12.2.2 7.13 One face dressed. Red sand stone White sand stone Both face dressed. Red sand stone. White sand stone cum cum 17,450.00 18,225.00 cum cum 14,154.00 14,929.00
Stone work plain ashlar in arches in cement mortar 1:3 (1 cement : 3 coarse sand) including centring, shuttering and pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. 7.13.1 7.13.2 Red sand stone White sand stone cum cum 16,424.00 17,199.00
7.14
Stone work plain ashlar in domes in cement mortar 1:3 (1 cement : 3 coarse sand) including centring, shuttering and pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. 7.14.1 7.14.2 Red sand stone White sand stone cum cum 23,248.00 24,024.00
7.15
Stone work ashlar punched (ordinary) in superstructure upto floor five level in cement mortar 1:6 (1 white cement : 6 coarse sand) including pointing with cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. 7.15.1 7.15.1.1 7.15.1.2 7.15.2 7.15.2.1 7.15.2.2 Red sand stone. One faced punched. Double faced punched. White sand stone. Single face punched. Double faced punched. cum cum cum 14,451.00 17,272.00 314.00 cum cum 13,677.00 16,497.00
7.16 7.17
Extra for stone work, plain ashlar or ashlar punched above floor V level for every four floors or part thereof. Extra for plain ashlar or ashlar punched in :
110
Code No
Description
Unit
Rate Rs. 1,042.00 724.00
7.17.1 7.18 7.19
Square or rectangular pillars
cum cum
Extra for stone work; plain ashlar or ashlar punched curved on plan with a mean radius not exceeding 6 m. Extra for additional cost of centering for arches exceeding 6m span including all strutting, bolting, wedging etc. and removal (area of soffit to be measured). SUNK, MOULDED, CARVED ASHLAR MASONRY
sqm
259.60
7.20
Stone work sunk or moulded or sunk and moulded upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : 7.20.1 7.20.2 Red sand stone White sand stone cum cum 18,430.00 19,204.00
7.21
Extra for stone work sunk or moulded or sunk and moulded or carved in : 7.21.1 7.21.2 Triangular or Square or rectangular pillars Circular or polygonal pillars cum cum per metre per cm girth 1,359.00 3,850.00
7.22
Extra for stone work sunk or moulded in cornices.
8.90
MISCELLANEOUS STONE WORK 7.23 Stone work (machine cut edges) for wall lining etc. (veneer work) backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing by means of cramps which shall be paid for separately) : Red sand stone - exposed face fine dressed with rough backing. 7.23.1.1 7.23.1.2 7.23.1.3 7.23.1.4 7.23.1.5 7.23.2 7.23.2.1 7.23.2.2 70 mm thick. 60 mm thick. 50 mm thick. 40 mm thick. 30 mm thick. Red sand stone - Exposed face machine cut and table rubbed with rough backing. 70 mm thick 60 mm thick sqm sqm 1,568.20 1,496.85 sqm sqm sqm sqm sqm 1,251.75 1,180.35 1,109.15 1,037.60 966.20
7.23.1
111
Code No
Description
Unit
Rate Rs. 1,425.65 1,354.10 1,282.70
7.23.2.3 7.23.2.4 7.23.2.5 7.23.3 7.23.3.1 7.23.3.2 7.23.3.3 7.23.3.4 7.23.3.5 7.23.4 7.23.4.1 7.23.4.2 7.23.4.3 7.23.4.4 7.23.4.5 7.24 7.25
50 mm thick 40 mm thick 30 mm thick White sand stone - exposed face fine dressed with rough backing . 70 mm thick. 60 mm thick. 50 mm thick. 40 mm thick. 30 mm thick. White sand stone - Exposed face machine cut and table rubbed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick. 40 mm thick. 30 mm thick.
sqm sqm sqm
sqm sqm sqm sqm sqm
1,305.95 1,226.85 1,147.90 1,068.45 989.45
sqm sqm sqm sqm sqm cum
1,622.45 1,543.30 1,464.40 1,412.80 1,305.90 1,042.00
Extra for stone work (veneer work) curved on plan with a mean radius not exceeding 6 m. Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand) including making the necessary chases in stone and holes in walls wherever required. Providing and fixing stone dowels 10x5x2.50 cm cut to double wedge shape as per design in cement mortar 1:2 (1 cement : 2 coarse sand) including making the necessary chases. Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand) including making the necessary chases. Providing and fixing sloping chajja of stone 40 mm thick and upto 80 cm wide beyond the wall as measured along the slope in cement mortar 1:4 (1 cement : 4 coarse sand) with 12mm diameter anchoring steel bar 45 cm long fixed in each stone and supported on and including with bricks cove of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand) including pointing in cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment
kilogram
529.50
7.26
each
21.25
7.27
each
20.00
7.28
112
Code No
Description
Unit
Rate Rs.
matching the stone shade: 7.28.1 7.28.1.1 7.28.2 7.28.2.1 7.29 Red sand stone: With F.P.S Bricks White sand stone: With F.P.S. bricks sqm 675.60 sqm 643.70
Providing and fixing horizontal chajja of stone 40 mm thick and upto 80 cm projection in cement mortar 1:4 (1 cement : 4 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade: : 7.29.1 7.29.2 Red sand stone White sand stone sqm sqm 395.30 423.15
7.30
30mm red sand stone sun-shade (chisel-dressed) supported on red sand stone brackets, fixed in walls with cement mortar 1:4 (1 cement : 4 coarse sand) including finishing complete. Providing and fixing red sand stone brackets 55x22.5x45cm sunk and moulded including providing and fixing with 4 Nos. gun metal cramp 25x6mm 30 cm long and dowel bars 7.5 cm long 6 mm dia as per design. Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in Cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. 7.32.1 7.32.2 Red sand stone White sand stone
sqm
418.50
7.31
each
1,346.80
7.32
cum cum
18,406.00 19,181.00
7.33
Providing and fixing stone jali 40mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc. 7.33.1 7.33.2 Red sand stone White sand stone sqm sqm cum/ mtr depth cum 3,668.80 3,694.40
7.34
Extra for laying stone work in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete. Extra for laying stone work in or under foul position. Wall lining butch work upto 10m height with dholpur stone 40 mm thick rough facing on the exposed surface with stone strips of minimum length 300 mm and required width including embedding every tenth layer and bottom most layer in masonry or concrete after making necessary chases of
180.75 69.65
7.35 7.36
sqm
802.15
113
Code No
Description
Unit
Rate Rs.
size 75x75mm and by providing layer of 75mm thick strips i/c 12mm thick bed of cement mortar 1:3 (1 Cement : 3 coarse sand) i/c ruled pointing in cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment to match the shade of stone complete as per direction of Engineer-incharge. 7.37 Stone work ( machine cut edges) for wall lining upto 10 m height etc. (Veneer work) backing filled with a grout of 12mm thick cement mortar 1:3 (1 Cement : 3 coarse sand) and jointed with Cement mortar 1:2 (1 cement : 2 stone dust) including rubbing and polishing complete. (To be secured to the backing by means of cramps which shall be paid for separately) 7.37.1 7.37.1.1 7.38 Kota stone slabs exposed face dressed and rubbed. 25 mm thick. sqm 724.95
Stone tile work for wall lining upto 10 m height with special adhesive over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement with an admixture of pigment to match the stone shade. 7.38.1 7.38.1.1 7.38.1.2 8mm thick (mirror polished and machine cut edge) Granite stone of any colour and shade. Raj Nagar plain white marble/ Udaipur green marble/ Zebra black marble. sqm sqm 1,043.75 894.95
7.39
Extra for stone work for wall lining on exterior walls of height more than 10 m from ground level for every additional height of 3 m or part there of. STONE WORK IN DRY CLADDING
sqm
40.75
7.40
Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately.) 7.40.1 7.40.2 Red sand stone. White sand stone sqm sqm 1,323.40 1,382.35
7.41
Providing and fixing structural steel frame (for dry cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/ rectangular tube in the required pattern as per architectural drawing including cost of cutting, bending, welding etc. The frame work shall be supported in wall with the help of MS brackets/
kilogram
80.75
114
Code No
Description
Unit
Rate Rs.
lugs of angle iron/ flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of size 300x230x300mm including cost of necessary centring and shuttering and with approved expansion hold fasteners on CC/RCC surface including drilling necessary holes. Approved cramps/ pins etc. shall be welded to the frame work to support stone cladding the steel work will be given a priming coat of Zinc primer as approved by Engineer-in-charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution). The frame work shall be fixed in true horizontal & vertical lines/planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel cramps shall be paid for separately and nothing extra shall be paid.) 7.42 Providing and fixing adjustable stainless steel cramps of approved quality and of required shape and size adjustable with stainless steel nuts bolts and washer (total weight not less than 260 gms) for dry stone cladding fixed on frame work at suitable location including making necessary recesses in stone slab, drilling required holes etc complete as per direction of the Engineer-in-charge.
each
272.50
115
SUB HEAD : 8.0
MARBLE WORK
117
BASIC RATES (SH: 8.0 MARBLE WORK)

Code No 0013 0019 0100 0101 0102 0114 0115 0116 0123 0126 0128 0367 1034 2216 2750 2751 7244 7245 7295 7297 7338 7339 7430 7431 7432 7452 7453 9999 Description Unit Rate Rs. 200.00 100.00 138.45 138.45 151.50 135.25 135.25 151.50 151.50 151.50 138.45 4,500.00 4,300.00 47.29 555.00 294.00 1,440.00 1,670.00 1,500.00 1,615.00 270.00 280.00 10.00 12.00 23.00 540.00 580.00 1.00
Machine for rubbing of floors Hand Grinder For mirror polish Bandhani Bhisti Blacksmith 1st class Beldar Coolie Fitter (grade 1) Mason (brick layer) 1st class Mason (for ornamental stone work) 1st class Mate Portland Cement Bolts and nuts up to 300 mm in length Carriage of Stone blocks white & red sand stone & kota stone slab 8 mm thick granite stone tiles (mirror polished of all shades) 8 mm thick marble tiles (polished) Raj Nagar Table rubbed polished stone 18 mm thick (75x50cm) Agaria Marble stone - 18 mm thick Table rubbed polished stone 18mm thick (75x50cm) Granite stone 18mm thick Granite Black marble, 18 mm thick slab, above 0.2 sqm up to 0.5 sqm (area wise) Granite Black marble, 18 mm thick slab, above 1.0 sqm up to 2.0 sqm (area wise) Gun metal cramp Stainless steel cramp Wedge expansion hold fastener 1/4" or 6 mm Wedge expansion hold fastener 3/8" or 10 mm Wedge expansion hold fastener 1/2" or 12 mm Raj nagar plain white marble (table rubbed and polished) 18 mm thick above 0.10 sqm up to 0.20 sqm Raj nagar plain white marble (table rubbed and polished) 18 mm thick above 0.20 sqm up to 0.50 sqm Sundries
Day Day Day Day Day Day Day Day Day Day Day tonne quintal tonne sqm sqm sqm sqm sqm sqm kilogram kilogram each each each sqm sqm L.S.
SUB HEAD 8.0 MARBLE WORK
119
8.0 MARBLE WORK

Marble work gang saw cut (polished and machine cut) of thickness 18mm for wall lining (veneer work) in cement mortar 1:3 (1 cement : 3 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the backing by means of cramps, which shall be paid for separately). 8.1.1 8.1.1.1 8.1.1.2 Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble. Area of slab upto 0.50 sqm Area of slab over 0.50 sqm sqm sqm 1,511.60 1,562.50
8.2
Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels. 8.2.1 8.2.1.1 8.2.1.2 8.2.2 8.2.2.1 8.2.2.2 Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble. Area of slab upto 0.50 sqm. Area of slab over 0.50 sqm. Granite of any colour and shade Area of slab upto 0.50 sqm Area of slab over 0.50 sqm. sqm sqm 2,480.20 2,543.65 sqm sqm 1,309.40 1358.15
8.3
Extra for providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-inCharge. 8.3.1 8.3.2 Marble work Granite work. metre metre 57.90 97.60
8.4
Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete. Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete. Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.
metre
106.80
8.5
each sqm
151.00 94.20
8.6
SUBHEAD -8.0 MARBLE WORK
120
Code No 8.7
Description
Unit
Rate Rs.
Providing and fixing cramps of required size & shape in RCC/ CC backing with cement mortar 1:2 ( 1 cement :2 coarse sand) including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately). 8.7.1 8.7.2 Gunmetal cramps. Stainless steel cramps. kg kg 500.65 529.50
8.8
Providing and fixing expansion hold fasteners on C.C. /R.C.C. surface backing including drilling necessary holes and the cost of bolt etc complete. 8.8.1 8.8.1.1 8.8.1.2 8.8.1.3 Wedge expansion type Fastener with threaded dia 6 mm. Fastener with threaded dia 10 mm. Fastener with threaded dia 12 mm. each each each 16.40 18.95 32.00
8.9
Stone tile (polished) work for wall lining over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. 8.9.1 8.9.1.1 8.9.1.2 8mm thick. Raj nagar plain white marble/ Udaipur green marble/ Zebra black marble. Granite of any colour and shade. sqm sqm 805.55 1,116.30
8.10
Providing and fixing 18 mm thick stone slab table rubbed, edges rounded and polished of size 75x50 cm deep and 1.8 cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. 8.10.1 8.10.2 White Agaria Marble Stone. Granite Stone of approved shade. sqm sqm 2,274.45 2,595.00
SUBHEAD -8.0 MARBLE WORK
121
SUB HEAD : 9.0
WOOD WORK & PVC WORK
123
BASIC RATES (SH: 9.0 WOOD WORK AND P.V.C. WORK)

Code No 0100 0102 0103 0111 0112 0114 0119 0123 0124 0130 0131 0156 0237 0305 0341 0346 0347 0348 0378 0379 0380 0381 0382 0383 0384 0385 0386 0387 0388 0400 Description Unit Rate Rs. 138.45 151.50 141.60 151.50 141.60 135.25 141.60 151.50 141.60 151.50 141.60 146.55 239.00 192.00 258.00 198.00 102.00 366.00 450.00 300.00 160.00 90.00 1,500.00 1,300.00 450.00 1,650.00 1,450.00 1,175.00 888.00 123.00
Bandhani Blacksmith 1st class Blacksmith 2nd class Carpenter 1st class Carpenter 2nd class Beldar Glazier Mason (brick layer) 1st class Mason (brick layer) 2nd class Mistry Painter Carpenter (average) Non - Asbestos multi purpose fibre cement board 8mm thick. Bamboo 25 mm dia 2.5 metre long Flat pressed 3 layer particle board (medium density) Grade I :12 mm thick Extra for veneered particle board with : Teak veneering on one side and commercial veneered on other side Extra for veneered particle board with : Commercial veneering on both sides Extra for veneered particle board with : Teak veneering on both sides Brass butt hinges (light/ordinary type) : 125x70x4 mm Brass butt hinges (light/ordinary type) : 100x70x4 mm Brass butt hinges (light/ordinary type) : 75x40x2.5 mm Brass butt hinges (light/ordinary type) : 50x40x2.5 mm Brass butt hinges (heavy type) : 125x85x5.5 mm(.70)kg Brass butt hinges (heavy type) : 100x85x5.5 mm(.56)kg Brass butt hinges (heavy type) :75x65x4.0 mm(.20)kg Brass parliamentary hinges 150x125x27x5 mm Brass parliamentary hinges 125x125x27x5 mm Brass parliamentary hinges 100x125x27x5 mm Brass parliamentary hinges75x100x20x3.2 mm Brass tower bolt (barrel type) 250x10 mm
Day Day Day Day Day Day Day Day Day Day Day Day sqm score sqm sqm sqm sqm 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos each
SUB HEAD 9.0 WOOD WORK & P.V.C. WORK
125
Code No 0401 0402 0403 0408 0409 0410 0411 0412 0413 0414 0423 0424 0425 0426 0431 0432 0433 0438 0447 0449 0450 0451 0452 0453 0555 0556 0557 0558 0568 0569
Description Brass tower bolt (barrel type) 200x10 mm Brass tower bolt (barrel type) 150x10 mm Brass tower bolt (barrel type) 100x10 mm Brass handles 125 mm with plate 175x32 mm Brass handles 100 mm with plate 150x32 mm Brass handles75 mm with plate 125x32 mm Brass door latch 300x16x5 mm (0.380 kg) Brass door latch 250x16x5 mm (0.350 kg) Brass mortice latch and lock 100x65 mm with6 levers and a pair of brass lever handles Brass mortice latch 100x65mm with a pair of brass lever handles Brass casement window fastener Brass casement stays (straight peg type ) 300 mm weighing not less than 0.33 kg Brass casement stays (straight peg type ) 250 mm weighing not less than 0.28 kg Brass casement stays (straight peg type ) 200 mm weighing not less than 0.24 kg Brass hasps and staples (safety type) 300 mm Brass hasps and staples (safety type) 115 mm Brass hasps and staples (safety type)90 mm Brass Night latch Brass cupboard knob or ward robe knob 50 mm Brass screws 50 mm Brass screws 40 mm Brass screws 30 mm Brass screws 25 mm Brass screws 20 mm Chromium plated Brass handles 125 mm with plate 175 x32 mm Chromium plated Brass handles 100 mm with plate 150 x 32 mm Chromium plated Brass handles 75mm with plate 125x32 mm Chromium plated Brass mortice latch and lock 100x65 mm with6 levers and a pair of brass lever handles Chromium plated brass casement window fastener Chromium plated Brass casement stays (straight peg type ) 300 mm weighing not less than 0.33 kg
Unit each each each each each each each each each each Each each Each each 10 Nos 10 Nos 10 Nos each each 100 Nos 100 Nos 100 Nos 100 Nos 100 Nos Each Each Each each each each
Rate Rs. 100.00 75.00 51.00 85.00 75.00 55.00 85.00 82.00 257.00 235.00 26.00 66.00 55.00 46.00 458.00 378.00 300.00 338.00 18.00 107.00 96.00 86.00 76.00 53.00 92.00 79.00 68.00 323.00 55.00 73.00
126
Code No 0570 0571 0583 0584 0585 0586 0587 0588 0589 0590 0591 0592 0594 0595 0596 0597 0608 0635 0637 0638 0639 0640 0641 0642 0643 0644 0645 0646 0647 0648
Description Chromium plated Brass casement stays (straight peg type ) 250 mm weighing not less than 0.28 kg Chromium plated Brass casement stays (straight peg type ) 200 mm weighing not less than 0.24 kg Chromium plated Brass Night latch Chromium plated Brass Wardrobe Knob 50 mm Chromium plated Brass screws 50 mm Chromium plated Brass screws 40 mm Chromium plated Brass screws 30 mm Chromium plated Brass screws 25 mm Chromium plated Brass screws 20 mm Chromium plated Brass curtain rod 12 mm dia 1.25mm thick Chromium plated Brass curtain rod 20 mm dia 1.25mm thick Chromium plated Brass curtain rod 25 mm dia 1.25mm thick Bright finished or black enamelled mild steel butt hinges 125x65x2.12 mm Bright finished or black enamelled mild steel butt hinges 100x58x1.90 mm Bright finished or black enamelled mild steel butt hinges75x47x1.70 mm Bright finished or black enamelled mild steel butt hinges50x37x1.50 mm Nickel plated mild steel piono hinges 1 mm thick 35 mm wide Bright finished or black enamelled mild steel screws 50 mm Bright finished or black enamelled mild steel screws 40 mm Bright finished or black enamelled mild steel screws 30 mm Bright finished or black enamelled mild steel screws 25 mm Bright finished or black enamelled mild steel screws 20 mm Bright finished or black enamelled mild steel bolts and nuts 50x6 mm Oxidised mild steel butt hinges 125x65x2.12 mm Oxidised mild steel butt hinges 100x58x1.90 mm Oxidised mild steel butt hinges75x47x1.70 mm Oxidised mild steel butt hinges50x37x1.50 mm Oxidised mild steel parliamentary hinges150x125x27x2.8 mm Oxidised mild steel parliamentary hinges 125x125x27x2.8 mm Oxidised mild steel parliamentary hinges 100x125x27x2.8 mm
Unit each each each each 100 Nos 100 Nos 100 Nos 100 Nos 100 Nos metre metre metre 10 Nos 10 Nos 10 Nos 10 Nos metre 100 Nos 100 Nos 100 Nos 100 Nos 100 Nos each 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos
Rate Rs. 67.00 56.00 383.00 25.00 123.00 150.00 90.00 83.00 63.00 122.00 143.00 239.00 78.00 54.00 34.00 28.00 21.00 40.00 30.00 24.00 15.00 15.00 4.00 92.00 53.00 32.00 27.00 255.00 205.00 165.00
127
Code No 0649 0650 0651 0652 0653 0654 0655 0656 0660 0661 0662 0663 0664 0665 0666 0667 0668 0669 0670 0679 0680 0681 0682 0683 0684 0685 0686 0687 0688 0689 0690 0691 0692 0693
Description Oxidised mild steel parliamentary hinges 75x100x20x2.24 mm Oxidised mild steel single acting spring hinges 150 mm Oxidised mild steel single acting spring hinges 125 mm Oxidised mild steel single acting spring hinges 100 mm Oxidised mild steel double acting spring hinges 150 mm Oxidised mild steel double acting spring hinges 125 mm Oxidised mild steel double acting spring hinges 100 mm Nickel plated mild steel piano hinges 1 mm thick 35 mm wide Oxidised mild steel sliding door bolt 300x16 mm Oxidised mild steel sliding door bolt 250x16 mm Oxidised mild steel door latch 300x20x6 mm Oxidised mild steel door latch 250x20x6 mm Oxidised mild steel tower bolt (barrel type) 250x10 mm Oxidised mild steel tower bolt (barrel type) 200x10 mm Oxidised mild steel tower bolt (barrel type) 150x10 mm Oxidised mild steel tower bolt (barrel type) 100x10 mm Oxidised mild steel handles 125 mm Oxidised mild steel handles 100 mm Oxidised mild steel handles75 mm Oxidised mild steel hasps and staples(safety type) 150 mm Oxidised mild steel hasps and staples(safety type) 115 mm Oxidised mild steel hasps and staples(safety type)90 mm Oxidised mild steel screws 50 mm Oxidised mild steel screws 40 mm Oxidised mild steel screws 30 mm Oxidised mild steel screws 25 mm Oxidised mild steel screws 20 mm Anodised Aluminium butt hinges 125x75x4 mm Anodised Aluminium butt hinges 125x63x4 mm Anodised Aluminium butt hinges 100x75x4 mm Anodised Aluminium butt hinges 100x63x3.2 mm Anodised Aluminium butt hinges 100x63x4 mm Anodised Aluminium butt hinges 75x63x4 mm Anodised Aluminium butt hinges 75x63x3.2 mm
Unit 10 Nos each each each each each each metre each each each each each each each each each each each 10 Nos 10 Nos 10 Nos 10 Nos 100 Nos 100 Nos 100 Nos 100 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos
Rate Rs. 122.00 71.00 66.00 51.00 73.00 63.00 47.00 24.00 45.00 37.00 25.00 25.00 25.00 21.00 17.00 12.00 7.00 5.00 3.00 79.00 70.00 52.00 40.00 35.00 24.00 16.00 15.00 478.00 447.00 416.00 390.00 354.00 281.00 215.00
128
Code No 0694 0696 0697 0698 0699 0700 0701 0702 0703 0704 0705 0706 0713 0714 0715 0717 0718 0719 0752 0753 0754 0755 0757 0759 0763 0834 0869
Description Anodised Aluminium butt hinges 75x45x3.2 mm Anodised Aluminium sliding door bolt 300x16 mm Anodised Aluminium sliding door bolt 250x16 mm Anodised Aluminium tower bolt (barrel type)300x10 mm Anodised Aluminium tower bolt (barrel type)250x10 mm Anodised Aluminium tower bolt (barrel type)200x10 mm Anodised Aluminium tower bolt (barrel type)150x10 mm Anodised Aluminium tower bolt (barrel type)100x10 mm Anodised Aluminium handles 125 mm with plate 175 x 32 mm Anodised Aluminium handles 100 mm with plate 150 x 32 mm Anodised Aluminium handles 75mm with plate 125 x 32 mm Anodised Aluminium kicking plate 50 cm long100x3.15 mm Block board construction flush door with teak wood ply on both faces 35 mm thick Block board construction flush door with teak wood ply on both faces 30 mm thick Block board construction flush door with teak wood ply on both faces 25 mm thick Block board construction flush door with commercial ply on both faces 35 mm thick Block board construction flush door with commercial ply on both faces 30 mm thick Block board construction flush door with commercial ply on both faces 25 mm thick Block board construction flush door lipping Square vision panel in Block board construction flush door Circular vision panel in Block board construction flush door Decorative type Louvers in Block board construction flush door Rebate cutting in Block board construction flush door Decorative plywood 4 mm Glue Synthetic enamel paint in all shades except black or chocolate shade Plaster of Paris
Unit 10 Nos each each 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos each sqm sqm sqm sqm sqm sqm sqm of door area sqm of door area Sqm of door area sqm of door area sqm of door area sqm kilogram litre kilogram
Rate Rs. 98.00 125.00 104.00 520.00 440.00 354.00 281.00 208.00 375.00 260.00 208.00 94.00 1,100.00 1,050.00 1,000.00 632.00 610.00 600.00 245.00 86.00 118.00 210.00 57.00 250.00 50.00 120.00 2.50
129
Code No 1003 1008 1015 1021 1022 1189 1190 1199 1211 1231 1238 2204 2205 2406 2407 2412 2449 2451 2452 2453 2454 2455 2456 2459 2464 2465 2466 2468
Description Mild steel round bar above 12 mm dia Flats up to 10 mm in thickness Mild steel expanded metal 20x60 mm strands Hard drawn steel wire fabric Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots Second class teak wood in scantling Second class teak wood in planks Sal wood in scantling G.I. plain washer for seam bolts Extra for selected planks of second class teakwood Extra for selected planks of first class teakwood Carriage of Timber Carriage of Steel Float glass sheet of nominal thickness 4 mm (weight not less than 10kg/sqm). Float glass sheet of nominal thickness 5.5 mm.(weight not less than 13.50 kg/sqm). Ply wood 5 ply with commercial ply on both faces 6 mm thick Oxidised mild steel pull bolt lock (locking bolt) of size 85 mm x 42 mm with screws, bolts, nuts and washers complete Brass cupboard lock 6 levers (best make of approved quality) 40 mm size Brass cupboard lock 6 levers (best make of approved quality) 50 mm size Brass cupboard lock 6 levers (best make of approved quality) 65 mm size Brass cupboard lock 6 levers (best make of approved quality) 75 mm size Brass hanging type door stopper 150 mm Hydraulic door closer bottle type M.S. body with necessary accessories and screws complete Anodised Aluminium hanging type door stopper Anodised Aluminium pull bolt lock (locking bolt) of size 85 mmx42 mm with screws, bolts, nuts and washers complete Anodised Aluminium Casement stay 250 mm Hollock wood in scantling Nickeled Chromium Brass cupboard lock 40 mm size
Unit quintal quintal sqm sqm 10 Nos 10 cudm 10 cudm 10 cudm 100 Nos 10 cudm 10 cudm cum tonne sqm sqm sqm each each each each each each each each each each 10 cudm each
Rate Rs. 3,050.00 2,900.00 200.00 310.00 9.00 394.00 410.00 218.00 21.00 72.00 80.00 60.81 47.29 248.00 340.00 282.00 27.00 36.00 43.00 55.00 70.00 46.00 506.00 14.00 34.00 36.00 217.00 38.00
130
Code No 2469 2470 2471 2480 2481 2483 2504 2505 7001 7003 7018 7019 7020 7021 7023 7029 7032 7034 7035 7036 7040 7042 7043 7048 7049 7055 7056 7059 7060 7063
Description Nickeled Chromium Brass cupboard lock 50 mm size Nickeled Chromium Brass cupboard lock 65 mm size Nickeled Chromium Brass cupboard lock 75 mm size Ply wood 5 ply with teak ply on both faces 9 mm thick Ply wood 5 ply with teak ply on one face and commercial ply on another face 9 mm thick Ply wood 7 ply with teak ply on one face and commercial ply on another face 9 mm thick Kiln seasoning of timber Hollock wood in planks Brass 100mm mortice latch and lock with6 levers without pair of handles Pair of Anodised Aluminium lever handles for 100mm mortice latch and lock Joint tape roll Dash fastener/Chemical fastener All drive screws ( for gypsum board) Primer ( for gypsum board) Chromium plated brackets ( curtain rods) Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia. of wire 0.63 mm Frosted glass sheet of nominal thickness 4 mm (weighing not less than 10 kg/sqm) Nickel plated M.S. pipe 20 mm dia. Nickel plated M.S. Brackets for curtain rod 20 mm Nickel plated M.S. Brackets for curtain rod 25 mm Oxidised mild steel screws 35 mm Mild steel conduit pipe (heavy type) ISI marked-20 mm dia. Mild steel conduit pipe (heavy type) ISI marked-25 mm dia. Rawl plug 50 mm (designation 10 no.) Teak wood lipping of size 25x3 mm in pelmets Flat pressed 3 layer and graded particle board (medium density) Grade 1 conforming to IS : 3087 - 18 mm thick Aluminium tee channel (heavy duty) with rollers and stop end Aluminium hanging floor door stopper with twin rubber & stopper Hydraulic door closer tubular type Aluminium section body Oxidised M.S. casement stay (straight peg type) 300 mm not less
Unit each each each sqm sqm sqm cum 10 cudm each each roll each 100 Nos litre each sqm sqm metre each each 100 Nos metre metre each metre sqm metre each each each
Rate Rs. 53.00 64.00 75.00 693.00 550.00 585.00 539.00 230.00 150.00 195.00 120.00 8.00 40.00 76.00 5.00 142.00 257.00 54.00 3.00 4.00 28.00 44.00 49.00 7.00 16.00 301.00 35.00 44.00 765.00 14.00
131
Code No
Description than 0.33 kg
Unit
Rate Rs.
7064 7065 7137
Oxidised M.S. casement stay (straight peg type) 250 mm not less than 0.28 kg Oxidised M.S. casement stay (straight peg type) 200 mm not less than 0.24 kg Factory made 35 mm thick shutters with laminated veneer lumber styles rails as per TADS IS:1995 and panels of 12 mm thick plain type-I, medium density flat pressed three layer, graded particle board (FPT-I) as per IS:3087-1985 bonded with BWP type synthetic resin adhesive, as per IS:848-1974 Factory made 35 mm thick shutters with laminated veneer lumber styles rails as per TADS IS:1995 and panels of 12 mm thick both sides pre laminated type-I, medium density flat pressed three layer, graded particle board (FPT-I) as per IS:3087-1985 bonded with BWP type synthetic resin adhesive, as per IS:848-1974 Factory made 35 mm thick shutters with laminated veneer lumber styles rails as per TADS IS:1995 and panels of 12 mm thick one side pre laminated type-I, and other side balancing lamination, medium density flat pressed three layer, graded particle board (FPT-I) as per IS:3087-1985 bonded with BWP type synthetic resin adhesive, as per IS:848-1974 Factory made 30 mm thick shutters with laminated veneer lumber styles rails as per TADS IS:1995 and panels of sheet glass using 10 kg/ sqm glass panes Factory made 35 mm thick shutters with laminated veneer lumber styles rails as per TADS IS:1995 and panels of galvanised wire gauge with average width of aperture 1.4 mm on both directions with wire of dia 0.63 mm Factory made 30 mm thick shutters with laminated veneer lumber styles rails as per TADS IS:1995 and panels of galvanised wire gauge with average width of aperture 1.4 mm on both directions with wire of dia 0.63 mm Laminated veneer lumber confirming to TADSS IS:1995 manufactured in factory in frames of doors, windows Oxidised M.S. safety chain (weighing not less than 450 gms) for door 25 mm thick particle board IInd class teak wood lipping 25 mm wide x 12 mm thick 25 mm thick melamine faced prelaminated three layer particle board For flush door shutters Extra for providing teak veneering on one side instead of commercial veneering Expandable fastener with plastic sleeve and M.S. screws. 25 mm long Expandable fastener with plastic sleeve and M.S. screws. 32 mm
each each sqm
12.00 11.00 1,500.00
7139
sqm
1,618.00
7143
sqm
1,572.00
7151
sqm
1,290.00
7154
sqm
1,328.00
7155
sqm
1,150.00
7157 7184 7269 7271 7272 7307 7312 7313
10 cudm each sqm metre sqm sqm each each
540.00 43.00 390.00 28.00 708.00 225.00 6.00 7.00
132
Code No
Description long
Unit
Rate Rs.
7314 7315 7349 7366 7367 7369 7443 7444 7445 7449 7451 7468 7477
Expandable fastener with plastic sleeve and M.S. screws 40 mm long Expandable fastener with plastic sleeve and M.S. screws 50 mm long 12 mm M.S. 'U' beading Glass reinforced Gyp sum ( GRG) board 8.5 mm thick Galvanised M.S. sheet 0.5 mm thick pressed channel section of size 50x32 mm Galvanised M.S. sheet 0.50 mm thick pressed stud. 48x34x36 mm Aluminium single cleat of size 30x32x3 Aluminium grip strip of size 50x12x2 25 mm prelaminated flush door both side decorative Aluminium U beading Glass sheet (Pin headed) 4 mm thick Veneered particle board with commercial veneering on both sides 12 mm thick Prelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823 (exterior grade)12 mm thick Prelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823 (exterior grade)18 mm thick Prelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823 (exterior grade)25 mm thick Prelaminated particle board with both sides decorative lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823 (exterior grade)12 mm thick Oxidised M. S. hinges finished with nickel plating 50 mm (Over all width) Oxidised M. S. hinges finished with nickel plating 65 mm (Over all width) PTMT handle 125x34x24mm PTMT handle 150x34x24mm PTMT butt hinges 75x60x10mm PTMT butt hinges 100x75x10mm PTMT Tower bolt 152x42x18mm PTMT Tower bolt 202x42x18mm PTMT door catcher 72x42mm
each each metre sqm metre metre each each sqm kilogram sqm sqm sqm
9.00 11.00 9.00 190.00 48.00 55.00 10.00 7.00 650.00 195.00 160.00 418.00 595.00
7478
sqm
716.00
7479
sqm
775.00
7480
sqm
625.00
7485 7486 7512 7513 7514 7515 7516 7517 7518
metre metre Each Each Each Each Each Each Each
29.00 34.00 27.00 30.00 36.00 48.00 60.00 72.00 24.00
133
Code No 7552 7553 7555 7556 8001 8002 8003 8004 8006 8010 8011 8100 8210 8211 8212 8214 8215 8216 8217 8218 8219 8220 8221 8222 8223 8224 8225 8678 8699 8700
Description Coir veneered board 4mm thick Coir veneered board 6mm thick Coir veneered board 12mm thick Coir veneered board 18mm thick 24 mm thick Factory made shutters with frame, rails and panels of PVC extruded sections in white, grey or wooden finish 30 mm thick Factory made shutters with frame, rails and panels of PVC extruded sections in white, grey or wooden finish Factory made PVC rigid foam panelled shutter i/c carriage Factory made PVC rigid foam panelled shutter as per IS : 4020 i/c carriage Factory made PVC rigid foam sheet 1mm thick 48mmX40mmX1.5mm thick Factory made door frame of PVC extruded sections in white, grey or wooden finish Factory made door frame PVC extruded sheet i/c carriage Powder coated M.S. butt hinges 100mm X58mmX1.9mm Stainless steel screws 50 mm Stainless steel screws 40 mm Stainless steel screws 30 mm Stainless steel screws 20 mm Stainless steel butt hinges 125x64x1.9 mm IS : 12817 marked Stainless steel butt hinges 100x58x1.9 mm IS : 12817 marked Stainless steel butt hinges 75x47x1.8 mm IS : 12817 marked Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked Stainless steel butt hinges (heavy weight) 125x64x2.5 mm IS : 12817 marked Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 12817 marked Stainless steel butt hinges (heavy weight) 75x50x2.5 mm IS : 12817 marked M.S. heavy weight but hinges 125x90x4.0mm IS : 1341 marked. M.S. heavy weight butt hinges 100x75x3.5 mm IS: 1341 marked M.S. heavy weight butt hinges 75x60x3.1 mm IS: 1341 marked M.S. heavy weight butt hinges 50x40x2.5 mm IS : 1341 marked 1mm thick 35mm wide bright finished stainless steel piano hinges . 8 mm thick tapered edge calcium silicate board . 10 mm thick calcium silicate board.
Unit sqm sqm sqm sqm sqm sqm sqm sqm sqm metre metre 10 Nos 100 Nos 100 Nos 100 Nos 100 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos. 10 Nos 10 Nos metre sqm sqm
Rate Rs. 235.00 308.00 548.00 820.00 1,830.00 1,900.00 1,743.00 2,148.00 145.00 112.00 294.00 66.00 213.00 157.00 98.00 63.00 200.00 143.00 112.00 90.00 261.00 185.00 155.00 256.00 133.00 67.00 52.00 30.00 194.00 323.00
134
Code No 8703 8704 8705 8706 8707 8708 8710 8711 8713 8714 8715 8716 8717 8719 8720 8721 8722 8723 8724 8725 8726 8727 8730 9999
Description Telescopic drawer channels 300mm long . Stainless steel roller for sliding arrangement in racks/ cupboards/ cabinets shutter . 50mmX42mmX2mm thick Factory made door frame of PVC extruded sections in white, grey or wooden finish 25mm thick factory made PVC flush door shutter i/c carriage. Factory made glass reinforced plastic door frame 90x45 mm i/c carriage. 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage. Factory made solid PVC door frame 60 x 30mm i/c carriage. 28mm factory made solid PVC panel door shutter i/c carriage. Fiber glass reinforced plastic chajja. Magnetic catcher triple strip vertical type. Magnetic catcher double strip horizontal type. 100 mm mort ice lock with 6 levers for aluminium door. 12.5 mm thick Glass fiber reinforced Gypsum board . 2nd class teak wood lipping/ moulded beading or Taj beading of size 18X5mm Ceiling sections 0.55 mm thick having a knurled web of 51.55mm and two flanges of 26mm each with lips of 10.55mm. Perimeter channel having one flange of 20mm and another flange of 30mm with thickness of 0.55mm and web of length 27mm. Nylon sleeves & wooden screws (40mm) Counter sunk ribbed head screw 25mm. 12mm thick marine plywood conforming to IS:710 12mm thick fire retardant plywood conforming to IS: 5509. 1.5mm thick decorative laminated sheet 1.0mm thick decorative laminated sheet 30 mm thick factory made glass fiber reinforced plastic flush door shutter i/c carriage. Sundries
Unit set each metre sqm metre sqm metre sqm sqm each each each sqm metre metre metre each 100 Nos sqm sqm sqm sqm sqm L.S.
Rate Rs. 92.00 5.00 117.00 1,975.00 333.00 1,580.00 223.00 1,975.00 3,520.00 13.50 10.00 152.50 130.00 19.00 34.00 20.00 1.50 60.00 740.00 690.00 405.00 330.00 1,960.00 1.00
135
9.0 WOOD AND P. V. C. WORK

Note :- Wood work items may be substituted with available species of wood as per direction of Engineer-in-charge for which rates shall be derived from the relevant items. FRAMES AND TRUSSES 9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position : 9.1.1 9.1.2 9.1.3 9.2 Second class teak wood Sal wood Kiln seasoned and chemically treated Hollock wood. cum cum cum 52,090.00 30,511.95 31,339.45
Providing laminated veneer lumber conforming to IS:14616 and TAD -15: 2001( Part B) in factory made frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position as per directions of Engineer-in-charge. Providing wood work in frames of false ceiling, partitions etc. sawn and put up in position : 9.3.1 9.3.2 Sal wood Kiln seasoned and chemically treated Hollock wood.
cum
69,044.20
9.3
cum cum
29,107.80 29,777.30
9.4
Extra for additional labour for circular works, such as in frames of fan light : 9.4.1 9.4.2 9.4.3 Second class teak wood Sal wood Kiln seasoned and chemically treated Hollock wood. cum cum cum 5,208.90 3,051.40 3,134.15
9.5
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked black enamelled M.S butt hinges with necessary screws excluding, panelling which will be paid for separately. 9.5.1 9.5.1.1 9.5.1.2 9.5.2 9.5.2.1 9.5.2.2 Second class teak wood 35 mm thick shutters 30 mm thick shutters Kiln seasoned and chemically treated Hollock wood. 35 mm thick shutters 30 mm thick shutters sqm sqm 899.70 810.90 sqm sqm 1,373.65 1,219.10
9.6
Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B) including ISI marked black enameled M.S. butt hinges with necessary screws as per directions of Engineer-in-charge and panelling with panels of:
Code No
Description 9.6.1 12mm thick plain grade - 1, medium density flat pressed three layer particle board FPT - I or graded wood particle board FPT - I IS : 3087 marked bonded with BWP type synthetic resin adhesive as per IS : 848 : 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade - 1, medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT - I, conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and prelaminated conforming to IS : 12823 Grade 1, Type - II marked: 12 mm thick one side Pre-laminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT-1 conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and pre-laminated conforming to IS : 12823 Grade -1, Type II marked:
Unit
Rate Rs.
sqm
1,877.20
9.6.2
sqm
2,014.25
9.6.3
sqm
1,960.80
9.7
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : 9.7.1 9.7.2 9.7.3 9.7.3.1 9.7.3.2 Second class teak wood Kiln seasoned and chemically treated Hollock wood Ply wood 5 ply, 9 mm thick : Decorative plywood both side decorative veneer (Type - I) conforming to IS 1328 BWR type. Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type Ply wood 7 ply, 9 mm thick : Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type Particle Board 12 mm thick Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked. Veneered flat pressed three layer or graded wood particle board with commercial veneering on both sides conforming to IS:3097, grade I. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS: 12823 marked. sqm 518.35 sqm 1,121.60 sqm sqm 1,075.60 711.25
sqm
1,077.05
9.7.4 9.7.4.1
sqm
971.85
9.7.5 9.7.5.1 9.7.5.2
sqm
740.20
9.5.7.3
sqm
985.70
SUBHEAD -9.0 WOOD AND PVC WORK
137
Code No
Description 9.7.5.4 Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS:12823 marked.
Unit
Rate Rs.
sqm
1,027.30
9.8
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Coir veneer board (conforming to IS : 14842-2000) : 9.8.1 12 mm thick sqm 920.50
9.9
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including black enamelled ISI marked M.S butt hinges with necessary screws. 9.9.1 9.9.1.1 9.9.1.2 9.9.2 9.9.2.1 9.9.2.2 Second class teak wood 35 mm thick 30 mm thick Kiln seasoned and chemically treated Hollock wood 35 mm thick 30 mm thick sqm sqm 1,178.60 1,077.50 sqm sqm 1,718.30 1,541.65
9.10
Providing and fixing factory made laminated veneer lumber glazed shutter conforming to IS: 14616 and TADS 15:2001 (Part B) , using 4mm thick float glass panes for doors, windows and clerestory windows including ISI marked black enamelled M.S butt hinges with necessary screws as per directions of Engineer-in-charge 9.10.1 30 mm thick shutters sqm 1,633.25
9.11
Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) 9.11.1 5.5 mm thick instead of 4 mm thick. sqm 106.85
9.12
Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). Deduct for providing pin headed glass panes instead of ordinary float glass panes weighing 4 mm thick in doors, windows and clerestory windows, shutters (Area of opening for glass panes excluding portion inside rebate shall be measured). Extra for providing ISI marked Stainless Steel butt hinges instead of black enamelled M.S. butt hinges with necessary screws. (Shutter area to be measured). Deduct if fixed shutters (without hinges) are provided instead of openable shutters for doors, windows or clerestory windows with :
sqm
10.45
9.13
sqm
102.20
9.14
sqm
83.80
9.15
138
Code No
Description 9.15.1 9.15.1.1 9.15.2 9.15.2.1 Stainless steel butt hinges with stainless steel screws : For 2nd class teak wood and other inferior class of wood shutters. Black enamelled M.S. butt hinges with necessary screws. For 2nd class teak wood and other inferior class of wood shutters.
Unit
Rate Rs.
sqm
112.60
sqm
28.80
9.16
Providing and fixing 25 mm thick shutters for cup board etc. : 9.16.1 9.16.1.1 9.16.2 9.16.2.1 Panelled or panelled & glazed shutters : Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws. Glazed shutters : Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws. sqm 1,368.90 sqm 1,372.50
9.17
Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : 9.17.1 9.17.2 12 mm thick 18 mm thick sqm sqm 364.95 418.40
9.18
Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). 9.18.1 9.18.2 18 mm thick 25 mm thick sqm sqm 935.95 1,009.70
9.19
Providing and fixing 25 mm thick shutters for cupboards etc. including ISI marked black enamelled M.S. butt hinges with necessary screws : 9.19.1 9.19.1.1 9.19.2 9.19.2.1 Panelled or panelled and glazed shutters Second class teak wood Glazed shutters Second class teak wood sqm 1,387.10 sqm 1,312.95
9.20
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 9.20.1 9.20.2 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 30 mm thick including ISI marked Stainless Steel butt hinges sqm sqm 1,473.50 1,415.45
139
Code No
Description with necessary screws. 9.20.3 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws.
Unit
Rate Rs.
sqm
1,317.65
9.21
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 9.21.1 9.21.2 9.21.3 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. sqm sqm sqm 929.95 904.40 853.05
9.22
Extra for Providing and fixing flush doors with decorative veneering 9.22.1 On one side in item no. 9.21 sqm 261.35
9.23
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Over item no. 9.20 and 9.21. Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) : 9.24.1 9.24.2 Rectangular or square. Circular.
sqm
284.55
9.24
sqm sqm
99.90 137.05
9.25
Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters (overall area of door shutters to be measured). 9.25.1 Decorative type door. sqm sqm 243.90 66.20
9.26 9.27
Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). Providing and fixing 35mm thick wire gauze shutters using galvanised M.S. wire gauze of average width of aperture 1.4mm with wire of dia. 0.63 mm for doors, windows and clerestory windows including ISI marked bright finished or/and black enamelled M.S. butt hinges with necessary screws : 9.27.1 9.27.2 Second class teak wood. Kiln seasoned and chemically treated Hollock wood.
sqm sqm
1,548.90 1,071.10
9.28
Providing and fixing 35mm thick wire gauze shutters using galvanised M.S. wire gauze of average width of aperture 1.4mm with wire of dia. 0.63 mm for doors, windows and clerestory windows including ISI marked stainless steel butt hinges with necessary screws : 9.28.1 Second class teak wood. sqm 1,632.70
140
Code No
Description 9.28.2 Kiln seasoned and chemically treated Hollock wood.
Unit sqm
Rate Rs. 1,154.90
9.29
Providing and fixing 30mm thick wire gauge shutters using galvanised M.S. wire gauge of average width of aperture 1.4mm with wire of dia. 0.63 mm for doors, windows and clerestory windows including ISI marked Stainless Steel butt hinges with necessary screws : 9.29.1 9.29.2 Second class teak wood. Kiln seasoned and chemically treated Hollock wood. sqm sqm 1,422.15 1,013.85
9.30
Providing and fixing 30mm thick wire gauze shutters using galvanised M.S. wire gauze of average width of aperture 1.4mm with wire of dia 0.63 mm for doors, windows and clerestory windows including ISI marked bright finished or /and black enamelled M.S. butt hinges with necessary screws : 9.30.1 9.30.2 Second class teak wood. Kiln seasoned and chemically treated Hollock wood. sqm sqm 1,365.70 957.50
9.31
Providing and fixing wire gauze laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauze with average width of aperture 1.4mm in both directions with wire of dia 0.63mm as per IS :1568 for doors, windows and clerestory windows including ISI marked bright finished or/ and black enamelled M.S. butt hinges with necessary screws as per directions of Engineer-in-charge: 9.31.1 9.31.2 35 mm thick shutters 30 mm thick shutters sqm sqm 1.677.40 1,470.65
MISCELLANEOUS WOOD WORK 9.32 Providing 50x50x50mm 2nd class teak wood plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement : 3 fine sand) and making good the walls etc. Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work /CC/ R.C.C. and making good etc. complete. 9.33.1 9.33.2 9.33.3 9.33.4 9.34 25 mm long 32 mm long 40 mm long 50 mm long each each each each 9.40 11.15 13.45 15.80
each
10.15
9.33
Providing and fixing 2nd class teak wood plain lining tongued and grooved on and including wooden plugs complete with necessary screws and priming coat on unexposed surface. 9.34.1 9.34.2 9.34.3 40 mm thick. 25 mm thick. 20 mm thick sqm sqm sqm 2,649.20 1,708.95 1,360.95
141
Code No
Description 9.34.4 12 mm thick
Unit sqm
Rate Rs. 867.70
9.35
Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination on other side balancing lamination Grade I, Type II, IS : 12823 marked including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete : 9.35.1 9.35.2 9.35.3 12 mm thick 18 mm thick 25 mm thick sqm sqm sqm 869.70 1,024.30 1,099.65
9.36
Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete. 9.36.1 Hollock wood. cum 54,377.30
9.37
Providing and fixing plywood 4 mm thick one side decorative veneer conforming to IS: 1328 (type-1) for plain lining / cladding with necessary screws, priming coat on unexposed surface with: 9.37.1 Decorative veneer facings of approved manufacture. sqm 577.40
9.38
Providing and fixing 4mm thick coir veneer board, ISI marked IS : 14842 2000, plain lining with necessary screws, priming coat on unexposed surface etc., complete. Providing and fixing skirting of Pre-laminated with (one side decorative and other side balancing lamination) flat pressed, 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete : 9.39.1 9.39.2 18 mm thick 25 mm thick
sqm
556.50
9.39
sqm sqm
1,150.35 1,225.70
9.40
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 9.40.1 9.40.1.1 9.40.1.2 9.40.2 9.40.2.1 9.40.2.2 2nd class teak wood 50x12 mm 50 x 20 mm Hollock wood 50x12 mm 50x20 mm metre metre 40.05 52.10 metre metre 53.85 75.10
9.41
Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to be paid separately) including fixing 50x12 mm beading complete with :
142
Code No
Description 9.41.1 Second class teak wood.
Unit sqm
Rate Rs. 890.00
9.42
Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia ( heavy type ) curtain rod with nickel plated brackets including fixing with 25x3 mm M.S. flat 10 cm long and rawl plugs 50 mm long (designation 10 no.) etc all complete Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS : 14842 - 2000, including top cover of 6 mm coir veneer board, nickle plated M.S. Pipe 20 mm dia. (heavy type) curtain rod with nickel plated brackets including fixing with 25x3 mm M.S. Flat 10 cm long and rawl plug 50 mm long (designation 10 No.) etc., all complete Extra for using veneered particle board conforming to IS 3097 Grade I, in item of pelmet 18mm thick 150mm wide. 9.44.1 9.44.2 Non decorative veneer on both sides. Particle board with decorative veneering on both sides.
metre
208.70
9.43
metre
309.20
9.44
metre metre metre
18.95 68.00 26.60
9.45 9.46
Providing and fixing teak wood lipping of size 25x3 mm in pelmet. Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete : 9.46.1 9.46.2 9.46.3 12 mm dia. 20 mm dia. 25 mm dia.
metre metre metre
163.40 187.80 299.30
9.47
Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : 9.47.1 9.47.2 20 mm dia (heavy type) 25 mm dia (heavy type) metre metre 69.90 76.85
9.48
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. 9.48.1 9.48.2 Fixed to steel windows by welding. Fixed to openings /wooden frames with rawl plugs screws etc. kg kg 59.25 64.40
9.49
Providing and fixing expanded metal 20x60mm strands 3.25mm wide and 1.6mm thick for windows etc. including 62x19mm beading of IInd class teak wood. Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second class teak wood. Providing and fixing fly proof galvanised M.S. wire gauze to windows and clerestory windows using galvanised M.S. wire gage with average width of
sqm
523.15
9.50
sqm
657.95
9.51
143
Code No
Description aperture 1.4 mm in both directions with wire of dia. 0.63 mm. 9.51.1 9.51.2 With 2nd class teak wood beading 62X19 mm. With 12 mm mild steel U beading.
Unit
Rate Rs.
sqm sqm
443.80 291.95
9.52
Deduct for fixing 75x25 mm hard drawn steel wire fabric of weight not less than 7.75 Kg. per sqm in panelled and glazed door and window shutter instead of glass sheet 4 mm thick. Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) Providing beams including hoisting, fixing in position and applying wood preservative for the unexposed surfaces, etc. complete with : 9.54.1 9.54.2 Sal wood. Hollock wood.
sqm
72.00
9.53
each
61.50
9.54
cum cum
28,335.90 28,217.40
BRIGHT FINISHED M.S. FITTINGS 9.55 Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 9.55.1 9.55.2 9.55.3 9.55.4 9.56 125x65x2.12 mm 100x58x1.90 mm 75x47x1.70 mm 50x37x1.50 mm each each each each 16.80 13.10 9.55 5.35
Providing and fixing IS : 1341 marked M.S. heavy weight butt hinges with necessary screws etc. complete : 9.56.1 9.56.2 9.56.3 9.56.4 125x90x4.00 mm 100x75x3.50 mm 75x60x3.10 mm 50x40x2.50 mm each each each each 37.50 22.25 13.40 8.15
Note: - In coastal areas, M.S. heavy weight butt hinges or stainless steel hinges shall be used. COPER OXIDISED MILD STEEL FITTINGS (COPPER OXIDISED AS PER IS: 1378) 9.57 Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. 9.57.1 9.57.2 9.57.3 9.57.4 9.58 125x65x2.12 mm 100x58x1.90 mm 75x47x1.70 mm 50x37x1.50 mm each each each each 18.55 13.45 9.30 5.25
Providing and fixing ISI marked oxidised M.S. pressed Parliamentary
144
Code No
Description hinges with necessary screws etc. complete : 9.58.1 9.58.2 9.58.3 9.58.4 150x125x27x2.80 mm 125x125x27x2.80 mm 100x125x27x2.80 mm 75x100x20x2.24 mm
Unit
Rate Rs.
each each each each
37.70 31.90 27.25 20.65
9.59
Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete : 9.59.1 9.59.2 9.59.3 150 mm 125 mm 100 mm each each each 96.20 90.40 72.55
9.60
Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete. 9.60.1 9.60.2 9.60.3 150 mm 125 mm 100 mm each each each 98.55 86.95 67.90
9.61
Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating and fixing with necessary screws etc., complete. 9.61.1 9.61.2 9.61.3 Overall width 35 mm. Overall width 50 mm. Overall width 65 mm. metre metre metre 72.35 78.20 84.00
9.62
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 9.62.1 9.62.2 300x16 mm 250x16 mm each each 79.60 69.65
9.63
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 9.63.1 9.63.2 9.63.3 9.63.4 250x10 mm 200x10 mm 150x10 mm 100x10 mm each each each each 33.90 28.60 23.40 17.25
9.64
Providing and fixing ISI marked 85x42mm oxidised M.S. pull bolt lock conforming to IS : 7534 with necessary screws bolts, nut and washers etc. complete. Providing and fixing ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete : 9.65.1 9.65.2 300x20x6 mm 250x20x6 mm
each
36.20
9.65
each each
33.10 33.10
145
Code No 9.66
Description Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 9.66.1 9.66.2 9.66.3 125 mm 100 mm 75 mm
Unit
Rate Rs.
each each each
10.20 7.75 5.45
9.67
Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : 9.67.1 9.67.2 9.67.3 150 mm 115 mm 90 mm each each each 12.20 10.95 8.85
9.68
Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete. 9.68.1 9.68.2 9.68.3 300 mm weighing not less than 200 gms. 250 mm weighing not less than 150 gms. 200 mm weighing not less than 120 gms. each each each each 19.15 16.45 15.25 52.80
9.69
Providing and fixing oxidised M.S. Safety chain with necessary fixtures for doors. (Weighting not less than 450 gms.) STAINLESS STEEL FITTINGS
9.70
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 9.70.1 9.70.2 9.70.3 9.70.4 125x64x1.90 mm 100X58X1.90 mm 75x47x1.80 mm 50x37x1.50 mm each each each each 47.05 35.25 23.75 14.80
9.71
Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : 9.71.1 9.71.2 9.71.3 125x64x2.50 mm 100x60x2.50 mm 75x50x2.50 mm each each each 54.15 40.10 28.75
BRASS FITTINGS 9.72 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 9.72.1 9.72.2 9.72.3 9.72.4 9.72.5 125x85x5.5 mm (heavy type) 125x70x4 mm (ordinary type) 100x85x5.5 mm (heavy type) 100x70x4 mm (ordinary type) 75x65x4 mm (heavy type) each each each each each 191.10 69.15 164.25 48.10 62.60
146
Code No
Description 9.72.6 9.72.7 75x40x2.5 mm (ordinary type) 50x40x2.5 mm (ordinary type)
Unit each each
Rate Rs. 28.95 14.55
9.73
Providing and fixing bright finished brass parliamentary hinges with necessary screws etc. complete : 9.73.1 9.73.2 9.73.3 9.73.4 150x125x27x5 mm 125x125x27x5 mm 100x125x27x5 mm 75x100x20x3.2 mm each each each each 205.55 182.30 150.40 114.10
9.74
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 9.74.1 9.74.2 9.74.3 9.74.4 250x10 mm 200x10 mm 150x10 mm 100x10 mm each each each each 155.15 126.20 97.20 67.30
9.75
Providing and fixing bright finished brass door latch with necessary screws etc. complete : 9.75.1 9.75.2 300x16x5 mm 250x16x5 mm each each 109.20 105.70
9.76
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing bright finished brass night latch including necessary screws etc. complete (best make of approved quality). Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers including necessary screws etc. complete (best make of approved quality) : 9.79.1 9.79.2 9.79.3 9.79.4 40 mm 50 mm 65 mm 75 mm
each
332.65
9.77
each each
307.10 426.75
9.78 9.79
each each each each each
75.95 84.10 98.05 115.45 23.70
9.80 9.81
Providing and fixing 50 mm bright finished brass cup board or wardrobe knob with necessary screws (best make of approved quality) Providing and fixing bright finished brass handles with screws etc. complete : 9.81.1 125 mm
each
103.65
147
Code No
Description 9.81.2 9.81.3 100 mm 75 mm
Unit each each each
Rate Rs. 91.80 68.55 56.05
9.82 9.83
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. Providing and fixing IS : 3564 marked Aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. complete. Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete. Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete. Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete : 9.86.1 9.86.2 9.86.3 300 mm weighing not less than 330 gms 250 mm weighing not less than 280 gms 200 mm weighing not less than 240 gms
each
610.60
9.84
each each
911.10 35.60
9.85 9.86
each each each
82.50 69.30 58.80
9.87
Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete: 9.87.1 9.87.2 9.87.3 150 mm 115 mm 90 mm each each each 61.90 49.85 40.75
CHROMIUM PLATED BRASS FITTINGS 9.88 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Providing and fixing chromium plated brass night latch including necessary screws etc. complete (Best make of approved quality). Providing and fixing special quality chromium plated brass cupboard locks with six levers including necessary screws etc. complete (Best make of approved quality) of : 9.90.1 9.90.2 9.90.3 9.90.4 9.91 9.92 Size 40 mm Size 50 mm Size 65 mm Size 75 mm each each each each each 78.30 95.70 108.50 121.25 31.80
each each
409.30 479.00
9.89 9.90
Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete. Providing and fixing chromium plated brass handles with necessary screws etc. complete:
148
Code No
Description 9.92.1 9.92.2 9.92.3 125 mm 100 mm 75 mm
Unit each each each each
Rate Rs. 111.75 96.45 83.65 69.60
9.93 9.94
Providing and fixing chromium plated brass casement window fastener with necessary screws etc. complete. Providing and fixing chromium plated brass casement stays (straight peg type) with necessary screws etc. complete : 9.94.1 9.94.2 9.94.3 300 mm weighing not less than 330 gms 250 mm weighing not less than 280 gms 200 mm weighing not less than 240 gms
each each each
90.50 83.55 70.75
ANODISED ALUMINIUM FITTINGS (ALL FITTINGS SHALL BE ISI MARKED) 9.95 Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 9.95.1 9.95.2 9.95.3 9.95.4 9.95.5 9.95.6 9.95.7 9.95.8 125x75x4 mm 125x63x4 mm 100x75x4 mm 100x63x4 mm 100x63x3.2 mm 75x63x4 mm 75x63x3.2 mm 75x45x3.2 mm each each each each each each each each 74.10 70.50 66.45 59.25 63.45 43.00 35.35 21.75
Note :- Aluminum hinges shall not be used in wooden shutters, stainless steel hinges shall be preferred. 9.96 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 9.96.1 9.96.2 9.97 300x16 mm 250x16 mm each each 158.50 134.10
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : 9.97.1 9.97.2 9.97.3 9.97.4 9.97.5 300x10 mm 250x10 mm 200x10 mm 150x10 mm 100x10 mm each each each each each 71.45 62.20 52.00 42.75 32.15
149
Code No 9.98
Description Providing and fixing aluminium pull bolt lock anodised ISI marked (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws bolts, nut and washers etc. complete. Providing and fixing 50cm long aluminium kicking plate 100x3.15 mm anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary screws etc. complete. Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 9.100.1 9.100.2 9.100.3 125 mm 100 mm 75 mm
Unit
Rate Rs.
each
44.35
9.99
each
115.70
9.100
each each each
48.80 35.30 28.35
9.101
Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 9.101.1 9.101.2 Single rubber stopper Twin rubber stopper each each 19.05 53.90
9.102
Providing and fixing aluminium casement stays ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality). Providing and fixing aluminium tee channels (heavy duty) with rollers, stop end in pelmets as curtain rod. GYPSUM BOARD PARTITIONS
each
47.55
9.103
each metre
435.90 43.05
9.104
9.105
Providing and fixing partition upto ceiling height consisting of G.I. frame and required board including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of grade 175, consisting of floor and ceiling channel 50mm wide having equal flanges of 32mm and 0.55mm thick fixed to the floor and ceiling at the spacing of 610mm centre to centre with dash fastener of 12.5mm dia meter 40mm length and the studs 48mm wide having one flange of 34mm and other flange 36mm and 0.55mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610mm centre to centre by 6mm dia bolts and nuts at both ends of partition fixed flush to wall with rawl plugs at spacing of 450mm centre to centre and fixing of boards to either side of frame work by 20mm long drive wall screws on studs, floor and ceiling channels at the spacing of 300mm centre to centre, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, joint finisher and two coats of primer
150
Code No
Description suitable for board as per manufacture's specification and direction of Engineer in Charge all complete. 9.105.1 67mm overall thickness partition with 8.5mm thick double skin glass reinforced Gypsum (GRG) board conforming to IS: 2095: part III. 75mm overall thickness partition with 12.5mm thick double skin plain Gypsum board conforming to IS: 2095: part I 66mm overall thickness Partition with 8mm thick double skin Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process with Compressive Strength 225 kg/sq.cm, Bending Strength 100 kg/ sq.cm. 66mm overall thickness partition using 8mm thick double skin non- asbestos multipurpose cement board reinforced with cellulose fibre manufactured through autoclaving process (High pressure steam cured) as per IS: 14862 with suitable fibre cement screw.
Unit
Rate Rs.
sqm sqm
813.80 674.45
9.105.2 9.105.3
sqm
823.10
9.105.4
sqm
927.65
9.106
Providing and fixing PTMT handles with necessary screws etc. complete. 9.106.1 9.106.2 125x34x24 mm weighing not less than 23 gms. 150x34x24 mm weighing not less than 26 gms. each each 33.35 36.85
9.107
Providing and fixing PTMT Butt hinges with necessary screws etc. complete. 9.107.1 9.107.2 75x60x10 mm fitted with 5.5 mm dia M.S. Bright Bar Rod weighing not less than 34 gms. 100x75x10 mm fitted with 5.5 mm dia MS Bright Bar Rod weighing not less than 53 gms. each each 47.40 62.55
9.108
Providing and fixing PTMT Tower Bolts with 12 mm one piece rod inside and necessary screws etc., complete. 9.108.1 9.108.2 152x42x18 mm weighing not less than 60 gms. 202x42x18 mm weighing not less than 78 gms. each each each 73.00 87.80 29.05
9.109
Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms. NEW ITEMS/ MODIFIED ITEMS
9.110
Providing and fixing Bamboo jaffery/ fencing consisting of superior quality 25mm dia (Average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of hollock wood in scantling of section 50X25mm fixed with nails and G.I wire on existing support complete as per direction of Engineer-in-charge. Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood. 9.111.1 50x50mm (base and height).
sqm
207.70
9.111
metre
94.10
151
Code No 9.112
Description Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5mm fixed with wooden adhesive of approved quality and screws/ nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge. Providing and fixing bright finished 100mm mortice lock with 6 levers without pair of handles for aluminium door with necessary screws etc complete (Best make of approved quality) as per direction of Engineer-incharge. Providing and fixing magnetic catcher in cupboard / ward robe shutters including fixing with necessary screws etc. complete (Best make of approved quality. 9.114.1 9.114.2 Triple strip vertical type. Double strip (horizontal type).
Unit
Rate Rs.
metre
30.10
9.113
each
203.05
9.114
each each
18.70 14.65
9.115
Providing and fixing powder coated telescopic drawer channels 300mm long with necessary screws etc. complete as per directions of Engineerin-charge. Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by P/F stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) Providing and fixing factory made UPVC door frame made of UPVC extruded section having an overall dimension as below (tolerance 1mm) with wall thickness 2.0mm 0.2mm, corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm 0.1mm wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge 9.117.1 9.117.2 Extruded section profile size 48x40 mm. Extruded section profile size 42x50 mm.
One set
120.75
9.116
each
7.00
9.117
metre metre
141.00 146.80
9.118
Providing and fixing to existing door frames. 9.118.1 24 mm thick factory made PVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm 0.1 mm wall thickness. The lock rail made up of 'H' section, a UPVC hollow section of size 100x24 mm and 2 mm 0.2 mm wall thickness fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a UPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm 0.1 mm wall thickness. The panels filled vertically and tie
sqm
2,190.50
152
Code No
Description bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-incharge. (For W.C. and bathroom door shutter). 9.118.2 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a UPVC hollow section of size 60x30 mm and wall thickness 2 mm 0.2 mm with inbuilt decorative moulding edging on one side. The styles and rails mitred and joined at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm 0.1 mm wall thickness. The lock rail made up of 'H' section, a UPVC hollow section of size 100x30 mm and 2 mm 0.2 mm wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a UPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm 0.1 mm wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. 25mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762mm X 25mm or less as per requirement with an average wall thickness of 1mm 0.3mm. PVC foam end cap of size 23x10mm are provided on both vertical edges to ensure the overall thickness of 25mm. An M.S. tube having dimensions 19mm x 19mm is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25MM X 11MM. Door shutter shall be reinforced with special polymeric reinforcements as per manufactures' specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places
Unit
Rate Rs.
sqm
2,271.80
9.118.3
sqm
2,358.90
9.119
Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge. Providing and fixing to existing door frames. 9.120.1 30mm thick factory made panel PVC door shutter consisting
metre
353.10
9.120
sqm
2,109.95
153
Code No
Description of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture . M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on either side forming styles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-incharge. Manufacturers specification & drawing (for W.C. and bathroom door shutter). 9.120.2 30mm thick factory made solid both side Pre-laminated panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture . M.S. frame covered with 5mm thick heat moulded Prelaminated PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on either side forming styles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5mm thick both side Pre-laminated PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge. Manufacturers specification & drawing (for W.C. and bathroom door shutter).
Unit
Rate Rs.
sqm
2,580.35
154
Code No 9.121
Description Providing and fixing fibre Glass Reinforced plastic (FRP) Door Frames of cross-section 90mm x 45mm having single rebate of 32mm x 15mm to receive shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat .Doorframe laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiberglass from all sides. M.S. stay shall be provided at the bottom to steady the frame. Providing and fixing to existing door frames. 9.122.1 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels conforming to IS: 14856 - 2000 including fixing to frames. 30mm thick fiberglass reinforced plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856 : 2000, complete as per direction of Engineer-in-charge.
Unit
Rate Rs.
metre
398.40
9.122
sqm
1,920.60
9.122.2
sqm
2,362.00
9.123
Providing and fixing factory made door frame (single rebate) made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 60mm width & 30mm thickness and shall be fixed to wall as per instructions of engineer-in-charge using 100x8 sheet metal CSK screws. Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71mm width & 28mm thick as styles and rails. Joints are made using solvent adhesive and GI 'C' sections (39mm x 19mm x 0.6mm thick) or M S pipe (40mm x 20mm ) stiffener frame insert & telescopic polymeric 'L' corners .The panel shall be filled with 3mm thick high - pressure compact laminate as per manufacturer's specifications and direction of Engineer-in-charge, cover moulding shall be provided for covering fixing screws and elegant look.( for W.C. and bathroom door shutter). Providing and fixing PVC rigid foam sheet 1mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive.
metre
270.65
9.124
sqm
2,379.40
9.125
sqm
419.35
155
Code No 9.126
Description Providing and fixing 12mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick. 9.126.1 9.126.2 Marine plywood conforming to IS: 710 Fire retardant plywood conforming to IS: 5509.
Unit
Rate Rs.
sqm sqm
1,186.80 1,117.45
9.127
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality 9.127.1 9.127.2 1.5 mm thick. 1.0 mm thick. sqm sqm 608.15 512.30
9.128
Providing and fixing factory made Fiberglass Reinforced plastics (F.R.P.) chajja 4mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2nos. vertically and 1nos. horizontally 50x2mm thick M.S. flat with 12mm in built hole for grouting on the existing wall along with the 50mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically, including all necessary fittings . The FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746 duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather & sunlight, Providing and fixing cup board shutters 25mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked exterior grade (Grade l Type ll) having one side decorative lamination and other side balancing lamination including IInd class teak wood lipping of 25mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of the Engineer-in-Charge Providing and fixing cup board shutters with 25mm thick veneered particle board IS : 3097 marked exterior grade (Grade I) of approved make including IInd class teak wood lipping of 25mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of Engineer-in-Charge. 9.130.1 9.130.2 With decorative veneering on one side and commercial veering on other side. With non decorative veneering on both sides.
sqm
4,452.00
9.129
sqm
1,103.00
9.130
sqm sqm
963.65 852.10
9.131
Providing and fixing factory made Pre-laminated particle board flat pressed three layer or graded wood particle board with one side decorative finish and other side balancing lamination conforming to IS: 12823 Grade l Type ll, of approved design, and edges sealed with water resistant paint and lipped with aluminium 'U' type edge beading all-round
156
Code No
Description the shutter, including fixing with angle cleat, grip strip, cadmium plated steel screws including fixing of aluminium hinges 100x63x4 mm etc. complete as per architectural drawing and direction of Engineer-in-Charge (Cost of 'U' beading and hinges will be paid for separately). 9.131.1 25 mm thick.
Unit
Rate Rs.
sqm
933.50
9.132
Providing and fixing aluminum U beading of required size to Prelaminated /flush door shutter including fixing etc. complete as per direction of Engineer-in-charge. Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the 'W' profile (0.55mm thick ) having a knurled web of 51.55mm and two flanges of 26mm each with lips of 10.55 mm placed @ 610mm C/C in perimeter channel having one flange of 20mm and another flange of 30mm with thickness of 0.55mm and web of length 27mm. Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @ 610mm C/C with fully threaded selftapping drive all screws. Board is fixed to the 'W' profile with 25 mm countersunk ribbed head screws @ 200mm C/C., all complete as per the drawing & directions of engineer-in-charge the joints of the boards are finished with specially formulated jointing compound and 48mm wide jointing tape to provide seamless finish. 9.133.1 Tapered edge calcium silicate board made with calcareous & siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with compressive strength 225 kg/sq.cm, Bending strength 100 kg/sq.cm. 10mm thick. Non -asbestos multipurpose cement board reinforced with cellulose fibre manufactured through autoclaving process (high pressure steam cured ) as per IS 14862 with suitable fibre cement screw. 8 mm thick. Gypsum board conforming to IS: 2095 - 1996: Part - I . 12.5 mm thick.
kg
339.75
9.133
9.133.1.1 9.133.2
sqm
657.25
9.133.2.1 9.133.3 9.133.3.1
sqm
549.90
sqm
410.55
157
SUB HEAD : 10.0
STEEL WORK
159
BASIC RATES (10.0 STEEL WORK)

Code No 0100 0102 0103 0114 0116 0119 0123 0124 0139 0423 0428 0595 0969 0973 0974 0975 0976 0977 Description Unit Rate Rs. 138.45 151.50 141.60 135.25 151.50 141.60 151.50 141.60 138.45 26.00 109.00 54.00 18.00 767.00 400.00 170.00 280.00 400.00
Bandhani Blacksmith 1st class Blacksmith 2nd class Beldar Fitter (grade 1) Glazier Mason (brick layer) 1st class Mason (brick layer) 2nd class Skilled Beldar (for floor rubbing etc.) Brass casement window fastener Brass fanlight catch Bright finished or black enamelled mild steel butt hinges 100x58x1.90 mm Pulley 25 mm dia Rolling shutter made of 80x1.25 mm machine rolled laths Top cover for rolling shutters 27.5 cm long wire spring grade no 2 for rolling shutters Ball bearing for rolling shutters Extra for mechanical devices chain and cranked operation for operating rolling shutters : exceeding 10.00 sq.m and up to 16.80 sq.m area of door Extra for mechanical devices chain and cranked operation for operating rolling shutters : exceeding 16.80 sq.m area of door Mild steel round bar 12 mm dia and below Mild steel round bar above 12 mm dia Structural steel such as tees, angles channels and R.S. joists Flats up to 10 mm in thickness Flats exceeding 10 mm in thickness Mild steel plates Mild steel sheets for tanks Mild steel hooks Mild steel rivets Bolts and nuts up to 300 mm in length Bolts and nuts above 300 mm in length
Day Day Day Day Day Day Day Day Day Each 10 Nos 10 Nos each sqm metre each each sqm
0978 1002 1003 1007 1008 1009 1010 1013 1019 1020 1034 1035
sqm quintal quintal quintal quintal quintal quintal quintal each quintal quintal quintal
450.00 3,100.00 3,050.00 3,100.00 2,900.00 2,875.00 3,400.00 3,475.00 22.00 3,500.00 4,300.00 4,300.00
SUB HEAD 10.0 STEEL WORK
161
Code No 1036 1143 1214 1215 1221 1222 1549 2205 2271 2406 4006 4007 4008 4009 4010 4011 4012 4013 4014 7027 7044 7045 7046 7047 7068 9999
Description Iron pintels including welded pin Steel beading Welding by gas plant Welding by electric plant 20 mm dia holding down bolts Mild steel sheets with bolts and nuts to rest on pintels G.I. pipes 40 mm dia Carriage of Steel Carriage of G.I. pipes below 100 mm dia Float glass sheet of nominal thickness 4 mm (weight not less than 10kg/sqm). Pressed steel door frames (mild steel sheet 1.25mm) Profile "B" Pressed steel door frames (mild steel sheet 1.25mm) Profile "C" Pressed steel door frames (mild steel sheet 1.25mm) Profile "E" Mild steel tubes hot finished welded type Mild steel tubes hot finished seamless type Mild steel tubes electric resistant or induction butt welded Circular C.I. Box for ceiling fan Pulley 40 mm dia Ready made steel door with necessary hinges, lugs and glazing clips excluding other fittings & their fixing M.S. Butt hinges 125x90x4 mm Rolling shutters of 80x0.90 mm laths Rolling shutters of 80x1.2 mm laths Top cover of Rolling shutters 0.90 mm thick Top cover of Rolling shutters 1.20 mm thick Extra for providing grilled rolling shutters with 8 mm dia M.S. rod Sundries
Unit each Metre cm cm quintal each metre tonne tonne sqm metre metre metre kilogram kilogram kilogram each each sqm 10 Nos sqm sqm metre metre sqm L.S.
Rate Rs. 28.00 15.00 1.00 1.00 3,800.00 75.00 160.00 47.29 47.29 248.00 170.00 187.00 214.00 38.00 42.00 53.00 35.00 19.00 1,406.00 80.00 576.00 615.00 205.00 228.00 185.00 2.60
SUB HEAD 10.0 STEEL WORK
162
10.0 STEEL WORK

Code No
10.1
Description Unit
Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. Providing and fixing 1mm thick M.S. sheet sliding-shutters with frame and diagonal braces of 40x40x6mm angle iron, 3mm M.S. gusset plates at the junction and corners 25mm dia pulley, 40x40x6mm angle and T-iron guide at the top and bottom respectively including applying a priming coat of approved steel primer. Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. 10.5.1 10.5.2 Using M.S. angels 40x40x6 mm for diagonal braces. Using flats 30x6mm for diagonal braces and central cross piece. sqm sqm
Rate Rs.
kg
42.15
10.2
kg
46.35
10.3
sqm
2,592.70
10.4
sqm
2,018.70
10.5
1,695.40 1,600.10
10.6
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs grade No.2 and M.S. top cover of required thickness for rolling shutters. 10.6.1 10.6.2 10.6.3 80x1.25mm M.S. laths with 1.25 mm thick top cover. 80x1.20 mm M.S. laths with 1.20 mm thick top cover. 80x0.90 mm M.S. laths with 0.90 mm thick top cover. sqm sqm sqm each 1,208.45 965.35 911.10 356.50
10.7 10.8
Providing and fixing ball bearing for rolling shutters. Extra for providing mechanical device chain and crank operation for operating rolling shutters. 10.8.1 10.8.2 Exceeding 10.00 sqm and upto 16.80 sqm in the area. Exceeding 16.80 sqm in area.
sqm sqm sqm
480.30 538.40 214.90
10.9
Extra for providing grilled rolling shutters manufactured out of 8 mm dia. M.S. bar instead of laths as per design approved by Engineer-in-
SUBHEAD -10.0 STEEL WORK
163
Code No
Description Unit
charge.(area of grill to be measured).
Rate Rs.
10.10
Fixing standard steel glazed doors, windows and ventilators in walls with 15x3mm lugs 10 cm long embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including fixing of float glass panes with glazing clips and special metal-sash putty of approved make, or metal beading with screws (only steel windows with lugs, glass panes cut to size and glazing clips or metal beading with screws, shall be supplied by department free of cost.) Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators side /top /centre hung with beading and all members such as K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted with 15x3mm lugs, 10cm long, embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of hinges, pivots, float glass panes with glazing clips and special metal sash putty of approved make and a priming coat of approved steel primer excluding the cost of other fittings except necessary hinges or pivots complete as per approved design (Sectional weight of only steel members shall be measured for payment without weight of glass & other fittings. Extra for providing and fixing steel beading of approved shape and section with screw instead of glazing clips and metal sash putty in steel doors, windows, ventilators and composite units. Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with dash fastener or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Providing and fixing pressed steel door frames confirming to IS: 4351manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strikeplate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:
kg
23.20
10.11
kg
178.90
10.12
metre
21.45
10.13
kg
51.15
10.14
164
Code No
Description Unit
10.14.1 10.14.2 10.14.3 Profile B Profile C Profile E metre metre metre
Rate Rs. 251.90 271.65 303.00
10.15
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with L-Type section made of 1.60mm thick M.S. Sheet, joints mitred and welded and grinded finish with profiles of required size with 15x3mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primers. Steel work in built up tubular trusses including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. 10.16.1 10.16.2 10.16.3 Hot finished welded type tubes. Hot finished seamless type tubes. Electric resistance or induction butt welded tubes.
kg
92.25
10.16
kg kg kg
61.50 66.35 79.80
10.17
Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete. Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3mm dia. round headed screws, one lock at the corners. Clamp shall be made of 12mm dia M.S. bar bent to shape as per standard drawing. Providing and fixing M.S. round holding down bolts with nuts and washer plates complete. Providing and fixing bolts including nuts and washers complete. Providing and fixing M.S. rivets of sizes in position. Welding by gas or electric plant including transportation of plant at site etc. complete. Providing and fixing bright finished brass casement window fasteners or peg stays to windows/ ventilators with necessary welding and machine screws etc. complete. Providing and fixing 14 mm bright finished brass spring catch to steel centre hung ventilators with necessary welding and machine screws etc. complete. Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel
each
75.20
10.18
each kg kg kg cm
81.20 52.05 62.75 69.90 1.45
10.19 10.20 10.21 10.22 10.23
kg
226.05
10.24
each
27.65
10.25
165
Code No
Description Unit
primer using structural steel etc. as required. 10.25.1 10.25.2 In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. kg kg
Rate Rs.
48.95 51.20
10.26
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing including applying a priming coat of approved steel primer. 10.26.1 10.26.2 10.26.3 M.S. tube. E.R.W. tubes. G.I. pipes. kg kg kg Sqm. 62.30 82.25 68.00 120.00
1164
Red sand stone slab 40 mm thick (undressed)
166
SUB HEAD : 11.0
FLOORING
167
BASIC RATES (SH: 11.0 FLOORING)

Code No 0002 0013 0100 0101 0103 0111 0114 0115 0123 0124 0126 0127 0130 0139 0295 0296 0297 0298 0313 0367 0368 0682 0784 0785 0788 0874 0875 0876 0982 0983 1007 Description Unit Rate Rs. 400.00 200.00 138.45 138.45 141.60 151.50 135.25 135.25 151.50 141.60 151.50 151.50 151.50 138.45 700.00 700.00 700.00 750.00 25,000.00 4,500.00 9,700.00 40.00 800.00 115.00 115.00 42.00 65.00 45.00 600.00 320.00 3,100.00
Hire charges of Concrete Mixer 0.14 cubic metre Machine for rubbing of floors Bandhani Bhisti Blacksmith 2nd class Carpenter 1st class Beldar Coolie Mason (brick layer) 1st class Mason (brick layer) 2nd class Mason (for ornamental stone work) 1st class Driver (for Road Roller, Concrete Mixer, Truck etc.) Mistry Skilled Beldar (for floor rubbing etc.) Stone Aggregate (Single size) : 20 mm nominal size Stone Aggregate (Single size) : 12.5 mm nominal size Stone Aggregate (Single size) : 10 mm nominal size Stone Aggregate (Single size) : 06 mm nominal size Blown type petroleum bitumen of penetration 85/25 of approved quality Portland Cement White Cement Oxidised mild steel screws 50 mm Marble dust/ powder Marble chips up to 4mm and downsize White & black Marble chips large size above 4 mm White & black Black colour dark shade pigment Red, chocolate, orange, buff or yellow (red oxide of iron) light shade pigment Green or blue medium shade pigment Coarse sand (zone III) Fine sand (zone IV) Structural steel such as tees ,angles channels and R.S. joists
Day Day Day Day Day Day Day Day Day Day Day Day Day Day cum cum cum cum tonne tonne tonne 100 Nos cum quintal quintal kilogram kilogram kilogram cum cum quintal
SUB HEAD 11.0 FLOORING
169
Code No 1008 1149 1168 1187 1190 1194 1201 1202 1203 1215 1227 1228 1229 1231 2201 2202 2203 2204 2205 2209 2211 2216 2261 2268 2500 2602 2710 2751 6001 6007 6010 6019 7024 7070
Description Flats up to 10 mm in thickness Glass strip 4 mm thick40 mm deep Kota stone slab 20 mm to 25 mm thick (semi-polished) First class teak wood in scantling Second class teak wood in planks Second class deodar wood in planks Precast terrazo tiles 22 mm thick (light shade) Precast terrazo tiles 22 mm thick(medium shade) Precast terrazo tiles 22 mm thick (dark shade) Welding by electric plant Chequered terrazo tiles 22 mm thick(light shade) Chequered terrazo tiles 22 mm thick(medium shade) Chequered terrazo tiles 22 mm thick (dark shade) Extra for selected planks of second class teakwood Carriage of Bricks Carriage of Stone aggregate below 40 mm nominal size Carriage of Coarse sand Carriage of Timber Carriage of Steel Carriage of Cement Carriage of Tar bitumen Carriage of Stone blocks white & red sand stone & kota stone slab Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna sand) Carriage of Marble dust and marble chips Extra for selected planks of second class deodar wood F.P.S. bricks class designation75 White marble makrana second quality plain veined stone pieces for crazy flooring 8 mm thick marble tiles (polished) Raj Nagar White marble slab Makrana second quality plain veined 18 mm thick Pink marble slab plain 18mm thick Udaipur green marble slab plain 18mm thick Black Zebra marble slab plain 18mm thick Acid Proof cement Chequered precast cement concrete tiles 22mm thick using marble
Unit quintal metre sqm 10 cudm 10 cudm 10 cudm sqm sqm sqm cm sqm sqm sqm cudm 1000 Nos cum cum cum tonne tonne tonne tonne cum cum 10 cudm 1000 Nos quintal sqm sqm sqm sqm sqm tonne sqm
Rate Rs. 2,900.00 6.00 239.00 492.00 410.00 335.00 198.00 175.00 170.00 1.00 230.00 200.00 170.00 72.00 141.88 53.21 53.21 60.81 47.29 47.29 53.21 47.29 53.21 53.21 59.00 1,900.00 105.00 294.00 1,722.00 546.00 580.00 415.00 7,400.00 415.00
170
Code No
Description chips of size 6mm - Light shade using white cement
Unit
Rate Rs.
7071 7077 7236 7254 7237 7800 7801 7802 7803 7804 7850 8620 8621 8622 8623 8731 9999 1165
White marble Raj Nagar plain 20 mm thick (slab area 0.10 sqm to 0.20 sqm) Acid and alkali resistant tiles 300x300 mm size, 10 mm thick Precast chequered cement tiles 22 mm thick Dark shade using ordinary cement Hardening compound Precast chequered cement tiles 22 mm thick medium shade using 50% white cement, 50% ordinary cement Ceramic Glazed Tiles Ist quality minimum thickness 5mm in all colours shades and designs except burgundy, bottle green, black Ceramic Glazed Tiles Ist quality 300 x 300mm in all shades and designs of White, Ivory, grey, Fume Red brown etc. Ceramic Glazed Tiles Ist quality 300 x 300 in all shades designs except White, Ivory, Grey, Fume Red Brown etc. Ceramic Glazed Tiles Ist quality 400 x 400 in all shades designs White, Ivory, Grey, Fume Red Brown etc. Ceramic Glazed Tiles Ist quality 400 x 400 in all shades designs except White, Ivory, Grey, Fume Red Brown etc. Agaria White marble slab plain 18mm thick Vitrified floor tile 50x50 cm Vitrified floor tile 60x60 cm Vitrified floor tile 80x80 cm Vitrified floor tile 100x100 cm High polymer modified quickset tile adhesive. Sundries White sand stone slab 40 mm thick (undressed)
sqm 10 Nos sqm litre Sqm. Sq.m. Sq.m. Sq.m. Sq.m. Sq.m. sqm sqm sqm sqm sqm per kg L.S. Sqm.
415.00 460.00 193.00 29.00 305.00 268.00 320.00 347.00 462.00 496.00 1000.00 645.00 700.00 1,076.00 1,290.00 13.75 1.00 140.00
171
11.0 FLOORING
Code No 11.1 Description Unit
Rate Rs.
Brick on edge flooring with bricks of class designation 75 including cement slurry etc. complete in cement mortar with F.P.S. bricks: 11.1.1 11.1.2 1:4 (1 cement : 4 coarse sand) 1:6 (1cement : 6 coarse sand) sqm sqm 326.00 296.20
11.2
Dry brick on edge flooring in required pattern with bricks of class designation 75 on a bed of 12 mm mud mortar including filling joints with Jamuna sand (with F.P.S. bricks) complete. Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 11.3.1 40mm thick with 20mm nominal size stone aggregate.
sqm
208.90
11.3
sqm
192.95
11.4
52 mm thick cement concrete flooring with concrete hardener topping under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume .hardening compound is mixed @ 2 litre per 50kg of cement or as per manufacturers specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. 62 mm thick cement concrete flooring with concrete hardener topping under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6mm nominal size) by volume. Hardening compound is mixed @ 2 litre per 50kg of cement or as per manufactures specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. Cement plaster skirting (up to 30 cm height) with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement. 11.6.1 18 mm thick.
sqm
286.55
11.5
sqm
318.65
11.6
sqm
168.50
11.7
Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete. Extra for making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc. TERRAZO FLOORING
cum sqm
3,695.95 13.15
11.8
11.9
40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 1mm to 4mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in
SUBHEAD -11.0 FLOORING
172
Code No
Description
Unit
Rate Rs.
proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume including cement slurry etc. complete : 11.9.1 11.9.2 11.9.3 11.9.4 11.9.5 11.9.6 11.10 Dark shade pigment with ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. sqm sqm sqm sqm sqm sqm 305.75 337.80 307.60 317.10 313.35 291.05
40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 31mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 9mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 4mm to 7mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder : 7 marble chips) by volume including cement slurry etc. complete. 11.10.1 11.10.2 11.10.3 11.10.4 11.10.5 11.10.6 Dark shade pigment with Ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. sqm sqm sqm sqm sqm sqm 303.60 349.25 322.45 335.85 311.20 297.85
11.11
40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 28 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 12mm thick with white, black, chocolate, grey yellow or green marble chips of sizes from 7mm to 10mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 2:3 (2 cement marble powder mix : 3 marble chips) by volume including cement slurry etc. complete : 11.11.1 11.11.2 11.11.3 11.11.4 11.11.5 11.11.6 Dark shade pigment with ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. sqm sqm sqm sqm sqm sqm 336.55 400.60 363.00 357.10 351.70 308.15
11.12
Marble chips skirting (up to 30 cm height) rubbed and polished to granolithic finish, top layer 6 mm thick with white, black, chocolate,
173
Code No
Description
Unit
Rate Rs.
grey, yellow or green marble chips of sizes from smallest to 4 mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume : 11.12.1 11.12.1.1 11.12.1.2 11.12.1.3 11.12.1.4 11.12.1.5 11.12.1.6 11.13 18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement : 3 coarse sand) : Dark shade pigment with ordinary cement. Light shade pigment with white cement. Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. Light shade pigment with ordinary cement. Ordinary cement without any pigment. sqm sqm sqm sqm sqm sqm 360.90 392.95 374.15 372.25 368.50 346.20
Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 11.13.1 40 mm wide and 4 mm thick. metre sqm 17.60 14.35
11.14 11.15
Extra for laying terrazo flooring on staircase treads not exceeding 30 cm in width including cost of forming, nosing etc. Crazy marble stone flooring including filling the gaps with light shade pigment with white cement marble powder mixture (3 parts of white cement : 1 part of marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 white, black or white and black marble chips of sizes from 1mm to 4mm nominal size by volume) and under layer 25mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) rubbing, polishing and cement slurry etc. complete : 11.15.1 18 mm thick crazy marble stone white, black or as specified.
sqm
482.45
TILE FLOORING 11.16 Precast terrazo tiles 22mm thick with graded marble chips of size upto 12mm laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete with precast tiles on 20mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : 11.16.1 11.16.2 11.16.3 11.16.4 11.17 Light shade using white cement. Medium shade using 50%white cement and 50% ordinary cement. Dark shade using ordinary cement. Ordinary cement without any pigment. sqm sqm sqm sqm 566.95 517.10 496.35 467.50 17.55
Extra if terrazo tiles are laid in treads of steps not exceeding 30 cm in width.
sqm
174
Code No 11.18
Description
Unit
Rate Rs.
Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto 12 mm in skirting and risers of steps not exceeding 30 cm in height on 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of : 11.18.1 11.18.2 11.18.3 11.18.4 Light shade using white cement. Medium shades using 50% white cement and 50% ordinary cement. Dark shade using ordinary cement. Ordinary cement without any pigment. sqm sqm sqm sqm 665.75 605.70 577.80 548.90
11.19
Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : 11.19.1 11.19.2 11.19.3 11.19.4 Light shade using white cement. Medium shade using 50% white cement, 50% ordinary cement. Dark shade using ordinary cement. Ordinary cement without any pigment. sqm sqm sqm sqm 607.80 549.05 496.35 467.55
11.20
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). 11.20.1 11.20.2 11.20.3 11.20.4 Light shade using white cement. Medium shade using 50% white cement 50% Grey cement. Dark shade using ordinary cement. Ordinary cement without any pigment. sqm sqm sqm sqm 775.45 613.25 454.60 425.70
11.21
Providing and fixing 10mm thick acid and/or alkali resistant tiles of approved make and colour using acid and or alkali resisting mortar bedding and joints filled with acid and/or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge. 11.21.1 11.21.1.1 11.21.2 11.21.2.1 In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand). Acid and alkali resistant tile. In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand). Acid and alkali resistant tile. sqm 909.15 sqm 873.00
11.22
Tile work in skirting, risers of steps and dado (up to 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white
175
Code No
Description
Unit
Rate Rs.
cement mixed with pigment of matching shade complete. 11.22.1 11.22.1.1 Marble tiles (polished) Raj Nagar. 8 mm thick. sqm 570.40
STONE FLOORING 11.23 Marble stone flooring with 18mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with : 11.23.1 11.23.2 11.23.3 11.23.4 11.23.5 11.23.6 11.24 11.25 Makrana white second quality. Raj Nagar plain. Agaria White Black Zebra. Udaipur green marble Pink plain marble. sqm sqm sqm sqm sqm sqm metre sqm 2,637.95 892.15 1,673.55 892.15 1,112.55 1,067.15 105.20 122.35
Extra for pre finished nosing to treads of steps of marble stone. Extra for marble stone flooring in treads of steps and risers using single length up to 2.00 metre . KOTA STONE FLOORING
11.26
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 11.26.1 25 mm thick. sqm 694.40
11.27
Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. SAND STONE FLOORING
sqm
676.75
11.28
40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 ( 1cement : 5 coarse sand) with joints finished flush. 11.28.1 11.28.2 Red sand stone White sand stone sqm sqm 309.40 334.95
11.29
40 mm thick fine dressed stone flooring over 20 mm (average)thick base of cement mortar 1:5 (1 cement : 5 coarse sand) including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone. 11.29.1 11.29.2 Red sand stone White sand stone sqm sqm 353.75 379.30
176
Code No 11.30
Description
Unit
Rate Rs.
40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement :5 coarse sand) with joints 3mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar 11.30.1 11.30.2 Red sand stone White sand stone sqm sqm metre sqm 386.65 412.20 26.40 6.45
11.31 11.32
Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. Extra for Kota stone/ sand stone in treads of steps and risers using single length up to 1.05 metre . WOODEN FLOORING
11.33
25mm wooden planking, tongued and grooved in flooring including fixing with iron screws complete with : 11.33.1 11.33.2 Second class teak wood Second class deodar wood sqm sqm 1,752.50 1,433.70
11.34
38mm thick wood block flooring of first class teak wood laid over 25mm thick leveling layer of cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 10mm nominal size) to be paid separately coated with a thin layer of hot bitumen (blown type) @ 2.45 kg per sqm. including fixing blocks in position after dipping in hot bitumen (blown type) up to half depth, planed, levelled smooth and finished complete. Providing and fixing M.S. angle 50x50x5 mm to act as nosing with lugs of M.S. flat 10x5 mm 10cm long forked at end 60cm apart (minimum three lugs to be provided) including necessary welding and applying a priming coat of approved primer on exposed surface etc. complete.
sqm
3,528.10
11.35
kilogram
48.05
CERAMIC GLAZED TILES 11.36 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete.
sqm
556.60
11.37
sqm
598.65
177
Code No
Description
Unit
Rate Rs.
11.38
Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours, shades, except White, Ivory, Grey, Fume Red Brown laid on 20mm thick bed of Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete. Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours White, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigments etc., complete. Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete. VITRIFIED FLOOR TILES
sqm
630.80
11.39
sqm
759.90
11.40
sqm
800.40
11.41
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. 11.41.1 11.41.2 11.41.3 11.41.4 Size of Tile 50x50 cm Size of Tile 60x60 cm Size of Tile 80x80 cm Size of Tile 100x100 cm sqm sqm sqm sqm sqm 966.35 1,031.85 1,478.30 1,733.05 233.95
11.42 11.43
Deduct for not using 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles. Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477 , using 5kg. adhesive per sqm of tile area, in average 3mm thickness.
sqm
224.70
178
SUB HEAD : 12.0
ROOFING
179
BASIC RATES (SH: 12.0 ROOFING)

Code No 0100 0101 0102 0103 0111 0112 0114 0115 0116 0117 0122 0123 0124 0128 0130 0131 0155 0222 0223 0224 0225 0226 0227 0228 0229 0230 0231 0232 0233 0234 0235 0236 0295 Description Unit Rate Rs. 138.45 138.45 151.50 141.60 151.50 141.60 135.25 135.25 151.50 141.60 151.50 151.50 141.60 138.45 151.50 141.60 146.55 30.00 205.00 203.00 174.00 188.00 195.00 126.00 93.00 197.00 267.00 232.00 84.00 275.00 161.00 180.00 700.00
Bandhani Bhisti Blacksmith 1st class Blacksmith 2nd class Carpenter 1st class Carpenter 2nd class Beldar Coolie Fitter (grade 1) Assistant Fitter or 2nd class Fitter Mason (for plaster of paris work) 1st class Mason (brick layer) 1st class Mason (brick layer) 2nd class Mate Mistry Painter Mason (average) Seam bolts and nuts 6 mm dia and 25 mm long Non - Asbestos fibre cement corrugated sheet 6mm thick. Non - Asbestos fibre cement close fitting adjustable ridge. Non - Asbestos fibre cement corrugate serrated adjustable ridge. Non - Asbestos fibre cement plain wing adjustable ridge. Non - Asbestos fibre cement unserrated adjustable ridge for hips. Non - Asbestos fibre cement corrugated appron piece. Non - Asbestos fibre cement eaves filler piece. Non - Asbestos fibre cement north light curves. Non - Asbestos fibre cement ventilator curves. Non - Asbestos fibre cement barge boards 6 mm thick. Non - Asbestos fibre cement ridge finial . Non - Asbestos fibre cement special north light curves. Non - Asbestos fibre cement S type louvers. Non - Asbestos multi purpose fibre cement board 6mm thick. Stone Aggregate (Single size) : 20 mm nominal size
Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day 10 Nos sqm metre metre metre metre metre each metre each metre pair each each sqm cum
SUB HEAD 12.0 ROOFING
181
Code No 0297 0308 0309 0314 0328 0332 0336 0341 0367 0370 0452 0637 0765 0771 0811 0845 0865 0869 0870 0886 0966 0982 0992 0994 0996 1001 1008 1015 1022 1023 1024 1025
Description Stone Aggregate (Single size) : 10 mm nominal size Bhusa Paving bitumen S-90 of approved quality Bitumen hot sealing compound : grade A White face insulating board:12 mm thick Natural colour insulating board:12 mm thick Flame retardant face insulating board: 12 mm thick Flat pressed 3 layer particle board (medium density) Grade I :12 mm thick Portland Cement Coal (steam) Brass screws 25 mm Bright finished or black enamelled mild steel screws 40 mm Hessian cloth Kerosene oil Mud (dry) Roofing paint for iron sheets in red colour Pig lead Plaster of Paris Plug Standard holder bat clamps for sand cast iron or cast iron pipes 150 mm dia Sand Cast iron plain shoe 150 mm dia Coarse sand (zone III) Galvanised steel plain sheets Standard quality hard board sheet 3 mm thick Standard quality hard board sheet 4.5 mm thick Spun yarn Flats up to 10 mm in thickness Mild steel expanded metal 20x60 mm strands Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots Galvanised steel J or L hooks 8 mm dia Galvanised steel bolts & nuts 10 mm dia and 125 mm long round head with slots Mild steel bolts 6 mm dia and 25 mm long with hexagonal head
Unit cum quintal tonne kilogram sqm sqm sqm sqm tonne quintal 100 Nos 100 Nos sqm litre cum litre kilogram kilogram each each each cum quintal sqm sqm kilogram quintal sqm 10 Nos 10 Nos each 10 Nos
Rate Rs. 700.00 200.00 22,500.00 20.00 239.00 175.00 208.00 258.00 4,500.00 300.00 76.00 30.00 10.00 19.00 20.00 95.00 58.00 2.50 6.00 20.00 222.00 600.00 3,450.00 103.00 120.00 30.00 2,900.00 200.00 9.00 58.00 7.00 18.00
182
Code No 1031 1032 1174 1175 1190 1196 1207 1208 1209 1210 1211 1213 1219 1220 1331 1984 2202 2203 2204 2205 2207 2209 2211 2216 2273 2302 2308 3002 3004 3050 4009 4202 7009 7010
Description Galvanised steel bolts & nuts 10 mm dia and 27 cm long both sides threaded with 4 galvanised steel nuts Galvanised steel bolts 10 mm dia and 7 cm long with nuts Red sand stone slab 45 mm and 50 mm thick (un-dressed) White sand stone slab 45 mm and 50 mm thick (un-dressed) Second class teak wood in planks First class kail wood in planks G.I. Limpet washer Bitumen washer G.I. plain washer thick G.I. plain washer thin G.I. plain washer for seam bolts Water proofing materials Wire nails Wire mesh (rabbit) M.S. Holder bat clamp of approved design for 100 mm S.C.I. pipe F.P.S. bricks tile class designation 100 Carriage of Stone aggregate below 40 mm nominal size Carriage of Coarse sand Carriage of Timber Carriage of Steel Carriage of Brick tiles Carriage of Cement Carriage of Tar bitumen Carriage of Stone blocks white & red sand stone & kota stone slab Carriage of A.C. sheet and accessories Carriage of G.I. sheet and accessories Carriage of Plaster of paris Poly vinyle chloride sheet 400 micron thick Stone ware spouts 100 mm dia 60 cm long Galvanised steel corrugated sheets Mild steel tubes hot finished welded type Red oxide Zinc chromate primer Gypsum board Ceiling sections
Unit each each sqm sqm 10 cudm 10 cudm 100 Nos 100 Nos 100 Nos 100 Nos 100 Nos kilogram kilogram sqm each 1000 Nos cum cum cum tonne 1000 Nos tonne tonne tonne tonne tonne tonne sqm each quintal kilogram litre sqm metre
Rate Rs. 13.00 9.00 145.00 160.00 410.00 186.00 20.00 18.00 27.00 20.00 21.00 20.00 40.00 38.00 13.00 1,950.00 53.21 53.21 60.81 47.29 85.13 47.29 53.21 47.29 47.29 47.29 47.29 26.00 28.00 3,650.00 38.00 58.00 140.00 36.00
183
Code No 7011 7012 7013 7014 7015 7016 7017 7018 7019 7020 7021 7090 7091 7187 7188 7189 7190 7191 7192 7193 7194 7195 7196 7197 7198 7199 7208 7209 7212 7213 7214 7215
Description Peri metre channel Intermediate channel Ceiling angle Connecting clips Soffit cleat Joint filler Joint finisher Joint tape roll Dash fastener/Chemical fastener All drive screws ( for gypsum board) Primer ( for gypsum board) Expanded polystyrene type N- Normal Expanded polystyrene type - SE C.I. grating 150 mm dia. (Weighing not less than 440 gm) U-PVC pipes (working pressure 4 kg / cm) Single socketed pipe 75 mm dia. U-PVC pipes (working pressure 4 kg / cm) Single socketed pipe 110 mm dia. U-PVC pipes (working pressure 4 kg / cm) Rubber (Seal) Ring 75 mm dia. U-PVC pipes (working pressure 4 kg / cm) Rubber (Seal) Ring 110 mm dia. UPVC coupler for UPVC drainage pipes 75 mm UPVC coupler for UPVC drainage pipes 110 mm UPVC push fit coupler (single) 75 mm thick UPVC push fit coupler (single) 110 mm thick UPVC single equal Tee (with door) 75x75x75 mm UPVC single equal Tee (with door) 110x110x110 mm UPVC single equal Tee (with door) 75x75x75 mm UPVC single equal Tee (with door) 110x110x110 mm UPVC bend 87.5o 75 mm bend UPVC bend 87.5o 110 mm bend UPVC plain shoe 75 mm bend UPVC plain shoe 110 mm bend UPVC pipe clip 75 mm bend UPVC pipe clip 110 mm bend
Unit metre metre metre each each kilogram kilogram roll each Nos litre sqm sqm each metre metre metre metre each each each each each each each each each each each each each each
Rate Rs. 23.00 38.00 16.00 5.00 3.00 19.00 22.00 120.00 8.00 40.00 76.00 108.00 131.00 16.00 58.00 112.00 14.00 17.00 30.00 40.00 47.00 72.00 83.00 115.00 100.00 160.00 50.00 85.00 105.00 196.00 15.00 30.00
184
Code No 7231 7232 7266 7267 7268 7385 7386 7857 7904 8611 8612 8613 8614 8615 8616 8617 8618 8667 8668 8669 8670 8671 8672 8673 8674 8675 8676 8677 9999
Description Resin Bonded Glass wool 16 kg/m 50 mm thick Resin Bonded Glass wool 24 kg/m 50 mm thick Pressed clay tiles Plain ceiling tiles (BWP type phenol formaldehyde synthetic resin bonded) (600x600x12 mm) Semi perforated ceiling tiles (600x600x12 mm) 3 mm thick translucent white acrylic plastic sheet 12 thick particle board ceiling tile P.T.M.T. Grating square slit 150mm Machine moulded tile bricks of class designation 125 Main T ceiling sections 24x38x0.3 mm (3 metre long) Perimeter wall angle 21x21 mm x 0.3mm (3 metre long) Intermediate cross T-section 24x25x0.3 mm (1.2 mtr long) Intermediate cross T-section 24x25x0.3mm (0.6 mtrs. long) Hanger rod 0.5 mm thick Adjustment clip Soffit cleat Dash fastener 6 mm dia 50 mm long UV stabilised 2 mm thick plain FRP sheet . UV stabilised 2 mm thick corrugated FRP sheet . Mangalore ridge tiles 20mm thick. Manglore tiles 20mm thick. Pre coated galvanised iron profile sheet 0.50 mm TCT Pre coated galvanised steel plain ridges. Pre coated galvanised steel flashings/aprons. Pre coated galvanised steel gutter Pre coated galvanised steel north light curves. Pre coated galvanised steel barge board. Pre coated galvanised steel crimp curve Sundries
Unit sqm sqm Nos each each sqm sqm each 1000 Nos each each each each each each each each sqm sqm each each sqm metre metre metre metre metre sqm L.S.
Rate Rs. 114.00 163.00 8,900.00 90.00 90.00 515.00 225.00 70.00 2,717.00 162.00 102.00 62.00 29.00 5.00 4.40 2.30 8.00 400.00 474.00 25.00 9.50 325.00 330.00 330.00 360.00 360.00 330.00 420.00 1.00
185
12.0 ROOFING
Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 12.1.1 12.1.2 12.1.3 1.00mm thick with zinc coating not less than 275gm/m 0.80mm thick with zinc coating not less than 275gm/m 0.63 mm thick with zinc coating not less than 275gm/ m sqm sqm sqm 612.85 515.30 432.25
12.2
Extra for straight cutting in C.G.S. sheet roofing for making opening of area exceeding 40 sq. decimeter for chimney stacks, sky light etc. : 12.2.1 12.2.2 12.2.3 1.00 mm thick 0.80 mm thick 0.63 mm thick metre metre metre 16.65 13.30 13.30
12.3
Extra for circular cutting in C.G.S. sheet roofing for making opening of area exceeding 40 square decimeter : 12.3.1 12.3.2 12.3.3 1.00 mm thick 0.80 mm thick 0.63 mm thick metre metre metre 97.65 78.00 78.00
12.4
Providing ridges or hips of width 60 cm over all width plain G.S. sheet fixed with polymer coated J. or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. 12.4.1 12.4.2 0.80mm thick with zinc coating not less than 275gm/m 0.63mm thick with zinc coating not less than 275gm/m metre metre 313.60 270.95
12.5
Providing valleys of 90cm wide overall in plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8mm dia.. G.I. limpet and bitumen washers complete : 12.5.1 1.60mm thick with zinc coating not less than 350gm/m metre 617.45
12.6
Providing flashing of 40 cm over all width in plain, G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts, G.I. limpet and bitumen washer complete, bent to shape and fixed in wall with cement mortar 1:3 (1cement : 3 coarse sand). 12.6.1 1.00mm thick with zinc coating not less than 275gm/m metre 223.55
SUBHEAD -12.0 ROOFING
186
Code No 12.7
Description
Unit
Rate Rs.
Providing and fixing 15 cm wide 45 cm over all semi circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 12.7.1 12.7.2 0.80mm thick with zinc coating not less than 275gm/m 0.63mm thick with zinc coating not less than 275gm/m metre metre 283.70 248.20
NON AC SHEET ROOFING
12.8
Providing non-asbestos high impact Polypropylene reinforced cement 6mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete excluding the cost of purlins, rafters and trusses: corrugated sheets and including cutting to size and shape wherever required. Extra for straight cutting in non- asbestos polypropylene reinforced cement corrugated, semi-corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter for chimney stacks, skylights etc. Extra for circular cutting in non-asbestos polypropylene reinforced cement corrugated/semi-corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter. Extra for providing and fixing wind ties of 40x 6mm flat iron section. Providing and fixing ridges and hips in non-asbestos fibre cement high impact polypropylene reinforced roofing with suitable fixing accessories or self drilling fastener and EPDM washer etc. complete. 12.12.1 12.12.2 12.12.3 12.12.4 Corrugated serrated adjustable ridges Plain wing adjustable ridges Close fitting adjustable ridges Unserrated adjustable hips
sqm
294.95
12.9
metre
13.30
12.10
metre metre
36.80 73.65
12.11 12.12
metre metre metre metre
263.15 282.70 348.75 292.10
NON AC ACCESSORIES
12.13
Providing and fixing non-asbestos fibre cement high impact polypropylene reinforced roofing accessories in all colours with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete: 12.13.1 Corrugated apron pieces metre 180.05
187
Code No
Description
Unit
Rate Rs. 121.95 268.10 353.95 304.00 115.00 362.05 175.35
12.13.2 12.13.3 12.13.4 12.13.5 12.13.6 12.13.7 12.13.8 12.14
Eave's filler pieces North light curves ventilator curves Barge boards Ridge finials Special north light curves S type louvers
metre metre metre metre pair each metre
Providing flat iron brackets 50x3mm size with necessary bolts, nuts and washers etc. for fixing asbestos cement/G.S. sheets gutters with purlins. Painting top of roofs with bitumen of approved quality at 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : 12.15.1 With residual type petroleum bitumen of penetration 80/100
metre
22.45
12.15
sqm
63.00
12.16
10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with flat tile bricks of class designation 100 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat : 12.16.1 With F.P.S. brick tiles sqm 220.85
12.17
10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25mm thick mud mortar with bhusha at 35kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow-dung) and covered with machine moulded tile bricks of class designation 125 conforming to IS : 2690 (Part I) -1992 grouted with cement mortar 1:3 ( 1 cement : 3 fine sand ) mixed with 2% of integral water proofing compound by weight of cement and finished neat. 12.17.1 With machine moulded F.P.S. brick tiles sqm sqm 254.70 5.15
12.18 12.19
Extra for every additional 1 cm thickness of mud phaska Providing and laying brick tiles of class designation 100 over mumty roofs grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement, over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat : 12.19.1 With F.P.S. brick tiles
sqm
184.35
12.20
Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness and of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water
sqm
390.60
188
Code No
Description
Unit
Rate Rs.
proofing compound laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete. 12.21 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 12.21.1 12.22 In 75x75mm deep chase metre 67.35
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edge sand making and finishing the outlet complete. Providing sand stone slab for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 coarse sand) over wooden karries or R.C.C. battens (Karries and battens to be paid separately) including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 fine sand ) complete : 12.23.1 12.23.1.1 12.23.2 12.23.2.1 Red sand stone slab 40 to 50 mm thick White sand stone slab : 40 to 50 mm thick
each
108.00
12.23
sqm
283.30
sqm
302.45
CEILING
12.24
Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately) : 12.24.1 12.24.1.1 12.24.2 12.24.2.1 12.24.3 12.24.3.1 Natural colour insulating board 12 mm thick White face insulating board 12 mm thick Flame retardant face insulating board 12 mm thick sqm 353.55 sqm 393.15 sqm 311.40
12.25
Providing and fixing flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 marked in ceiling with necessary nails etc. complete (frame work to be paid separately) : 12.25.1 12 mm thick sqm 417.10
12.26
Providing and fixing plain Multipurpose Cement board ( High Pressure steam cured ) as per IS : 14862 : 2000 ) with suitable fibre cement
189
Code No
Description
Unit
Rate Rs.
screw in ceiling etc. complete (frame work to be paid separately) : 12.26.1 12.27 6 mm thick cement board sqm 317.45
Extra for Circular cutting and waste in ceiling with: 12.27.1 12.27.2 12.27.2.1 12.27.3 12.27.3.1 12.27.4 12.27.4.1 12.27.5 12.27.5.1 12.27.5.2 2nd class teak wood planks 20 mm thick Natural colour insulating board 12 mm thick White face insulating board: 12 mm thick Flame retardant face insulating board: 12 mm thick Standard quality hard board sheet: 3 mm thick 4.5 mm thick metre metre sqm 81.05 83.75 65.45 metre 97.80 metre 102.75 metre 92.55 metre 186.40
12.28 12.29
Extra for providing and fixing ceiling to curved surfaces in narrow widths Providing and fixing false ceiling with 12 mm thick plain/ semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board conforming to IS:3087 finished with a coat of aluminium primer on both sides & edges and two coats of synthetic enamel paint of approved quality on exposed face fixed to a grid made out of anodised aluminium(with 15 micron anodic coating) T-sections 35 x15x1.5 mm size main runners and cross runners 23.5x19x1.5 mm fixed to main runners placed 600 mm centre to centre both ways so as to form a grid of 600 mm square. The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S rod fixed to roof slab by means of ceiling cleats. The suspenders shall be placed 600x 1200 mm centre to centre including fixing to the frame with C.P brace screws and applying a priming coat of zinc chromate yellow primer (aluminium frame work shall be paid separately). Extra for providing 3 mm thick translucent white acrylic plastic sheets of approved quality in false ceiling instead of 12 mm thick plain/or with design particle board ceiling tiles in item above. Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately) : 12.32.1 12.32.2 Flat surfaces Curved surfaces
sqm
202.45
12.30
sqm
336.85
12.31
sqm sqm sqm
402.40 452.35 104.70
12.32
Extra for any sunk or raised mouldings in the plaster of Paris (Gypsum anhydrous) ceiling
190
Code No 12.33
Description
Unit
Rate Rs.
Extra for providing plaster of Paris (Gypsum anhydrous) ceiling above 5metres height from floor level. Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS : 8183 density 24kg/m3, 50mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24g wire and mesh, for top most ceiling of building. Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183. Density 16kg/m3 , 50mm thick, wrapped in 200G Virgin Polythene bags placed over existing false ceiling and held in position by criss-crossing GI wire. Thermal Insulation of roofing with Expanded polystyrene fixed with suitable adhesive to the false ceiling as per the directions of the Engineer-in-charge : 12.36.1 12.36.2 With Type N - Normal 50 mm thick With Type SE - Self Extinguishing type 50 mm thick
sqm per metre height
38.90
12.34
sqm
310.10
12.35
sqm.
168.35
12.36
sqm sqm
156.75 186.10
RAIN WATER SPOUT AND PIPE
12.37
Providing and fixing 100 mm diameter and 60 cm long rain water spout in cement mortar 1:4 (1 cement : 4 fine sand). 12.37.1 Stone ware spout each 36.15
12.38.
Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. : 12.38.1 12.38.2 100 mm diameter 150 mm diameter each each 65.35 73.45
12.39
Providing lead caulked joints to sand cast iron rain water pipes and fittings : 12.39.1 12.39.2 100 mm dia. Pipe 150 mm dia. Pipe each each 126.50 175.30
12.40
Providing, fixing and embedding sand cast iron accessories for rain water pipes in the masonry surrounded with 12 mm thick cement mortar of the same mix, as that of masonry (lead caulking will be paid for separately) : 12.40.1 12.40.1.1 Sand cast iron plain shoes : 150 mm diameter each 278.25
191
Code No 12.41
Description
Unit
Rate Rs.
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes. 12.41.1 12.41.2 75 mm diameter 110 mm diameter metre metre 95.00 163.40
12.42
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 12.42.1 12.42.1.1 12.42.1.2 12.42.2 12.42.2.1 12.42.2.2 12.42.3 12.42.3.1 12.42.3.2 12.42.4 12.42.4.1 12.42.4.2 12.42.5 12.42.5.1 12.42.5.2 12.42.6 12.42.6.1 12.42.6.2 Coupler 75 mm 110 mm Single pushfit Coupler : 75 mm 110 mm Single tee with door 75x75x75 mm 110x110x110 mm Single tee without door 75x75x75 mm 110x110x110 mm Bend 87.5 75 mm bend 110 mm bend Shoe (Plain) 75 mm Shoe 110 mm Shoe each each 152.25 263.10 each each 88.40 134.20 each each 157.70 208.45 each each 177.45 260.70 each each 101.15 138.85 each each 81.40 101.65
12.43
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 12.43.1 12.43.2 75 mm 110 mm each each each 79.50 96.90 23.40
12.44
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
192
Code No 12.45
Description
Unit
Rate Rs.
Providing and fixing at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.49.1 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part I. sqm 502.10
12.46
Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms.
each
86.15
NEW ITEMS
12.47
Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 12.47.1 2mm thick corrugated (2.5" or 4.2" or 6") or step-down (2" or 3" or 6" ) as specified. sqm 785.35
193
Code No
Description
Unit
Rate Rs. 673.35
12.47.2 12.48
2mm thick flat.
sqm
Providing & fixing on roof pressed clay tile (Mangalore tile) 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately). Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately). Provided & fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : 12.51.1 12.51.2 12.51.3 12.51.4 12.51.5 12.51.6 Ridges plain (500 - 600mm). Flashings/ Aprons.( Upto 600 mm) North light curves. Barge board (Upto 300 mm). Crimp curve Gutter .(600 mm over all girth).
sqm
209.40
12.49
sqm
105.00
12.50
sqm
440.65
12.51
metre metre metre metre sqm metre
458.15 448.15 504.75 416.90 537.15 547.80
12.52
Providing and fixing tiled False Ceiling of approved materials of size 595x595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections ( galvanized @ 170 gsm/sqm.) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200mm center to center and cross "T" of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main "T" at 600mm center to center to form a grid of
194
Code No
Description
Unit
Rate Rs.
1200x600 mm and secondary cross "T" of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 21x21x0.3mm and laying false ceiling tiles of approved texture in the grid including, wherever, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats fixed to ceiling with 6 mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanised level clips spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete at all heights as per specifications drawings and as directed by Engineer-in-Charge.(The rate is excluding the cost of tiles which will be paid for separately ).
sqm
358.25
195
SUB HEAD : 13.0
FINISHING
197
BASIC RATES (SH: 13.0 FINISHING)

Code No 0101 0112 0114 0115 0122 0123 0131 0141 0155 0324 0367 0368 0763 0771 0775 0776 0777 0815 0816 0818 0820 0821 0823 0826 0827 0828 0829 0830 0831 0833 0834 0835 0850 Description Unit Rate Rs. 138.45 141.60 135.25 135.25 151.50 151.50 141.60 138.45 146.55 16.00 4,500.00 9,700.00 50.00 19.00 295.00 178.00 177.00 26.00 40.00 80.00 70.00 73.00 72.00 89.00 93.00 52.00 65.00 115.00 100.00 115.00 120.00 140.00 60.00
Bhisti Carpenter 2nd class Beldar Coolie Mason (for plaster of paris work) 1st class Mason (brick layer) 1st class Painter White Washer Mason (average) Coal Tar Portland Cement White Cement Glue Kerosene oil Dehradun white lime Satna lime Dry hydrated lime (factory made) Dry distemper Oil bound washable distemper/ Acrylic distemper Linseed oil (double boiled) Cement primer Distemper primer Pink primer (for wood) Aluminium paint Acid proof paint (chocolate or black) Anticorrosive bituminous paint (black) Black Japan Enamel paint Floor enamel paint in all shades except green Synthetic enamel paint in black or chocolate shade Synthetic enamel paint in all shades except black or chocolate shade Plastic emulsion paint White lead
Day Day Day Day Day Day Day Day Day litre tonne tonne kilogram litre quintal quintal quintal kilogram kilogram litre litre litre litre litre litre litre litre litre litre litre litre litre kilogram
SUB HEAD 13.0 FINISHING
199
Code No 0851 0855 0856 0857 0858 0859 0868 0869 0982 0999 1000 1179 1198 1213 1216 2202 2203 2209 2911 4201 4202 4203 4204 4205 4206 4207 7239 7240 8504 8505 8506 8507 8509 8510 9999
Description Water proofing cement paint Wax polish (ready made) Ordinary varnish Superior copal varnish Superior spar varnish Oil type wood preservative Premixed super white gypsum plaster. Plaster of Paris Coarse sand (zone III) Shellac Spirit Crushed stone 2.36 mm to 12.5 mm size Second class kail wood in planks Water proofing materials Whiting Carriage of Stone aggregate below 40 mm nominal size Carriage of Coarse sand Carriage of Cement Stone chippings/ screenings 10/ 11.2 mm nominal size Aluminum primer Red oxide Zinc chromate primer Copper acetate Hydrochloric acid Copper chloride Copper nitrate Ammonium chloride Epoxy paint Fire retardant paint Multi surface paint Acrylic exterior paint Premium Acrylic exterior paint Textured exterior paint Special Primer Metal Primer Sundries
Unit kilogram kilogram litre litre litre litre kg kilogram cum kilogram litre cum cudm kilogram quintal cum cum tonne cum litre litre kilogram kilogram kilogram kilogram kilogram litre litre litre litre litre litre litre litre L.S.
Rate Rs. 36.00 150.00 49.00 100.00 105.00 60.00 5.20 2.50 600.00 192.00 37.00 675.00 178.00 20.00 329.00 53.21 53.21 47.29 700.00 63.00 58.00 228.00 27.00 244.00 173.00 12.00 280.00 318.00 264.00 123.00 202.00 183.00 76.00 91.00 1.00
SUB HEAD 13.0 FINISHING
200
13.0 FINISHING
Note :- Rates for external plaster are for height upto 10m. from ground level unless otherwise stated. CEMENT PLASTER (IN FINE SAND) 13.1 12 mm cement plaster of mix : 13.1.1 13.1.2 13.2 1:4 (1 cement: 4 fine sand) 1:6 (1 cement: 6 fine sand) sqm sqm 77.55 67.65
15 mm cement plaster on the rough side of single or half brick wall of mix : 13.2.1 13.2.2 1:4 (1 cement: 4 fine sand) 1:6 (1 cement: 6 fine sand) sqm sqm 90.35 78.55
13.3
20 mm cement plaster of mix : 13.3.1 13.3.2 1:4 (1 cement: 4 fine sand) 1:6 (1 cement: 6 fine sand) sqm sqm 110.45 95.10
CEMENT PLASTER (IN COARSE SAND) 13.4 12 mm cement plaster of mix : 13.4.1 13.4.2 13.5 1:4 (1 cement: 4 coarse sand) 1:6 (1 cement: 6 coarse sand) sqm sqm 82.55 72.70
15 mm cement plaster on rough side of single or half brick wall of mix : 13.5.1 13.5.2 1:4 (1 cement: 4 coarse sand) 1:6 (1 cement: 6 coarse sand) sqm sqm 96.35 84.55
13.6
20 mm cement plaster of mix : 13.6.1 13.6.2 1:4 (1 cement: 4 coarse sand) 1:6 (1 cement: 6 coarse sand) sqm sqm 118.25 102.90
CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT 13.7 12 mm cement plaster finished with a floating coat of neat cement of mix : 13.7.1 13.7.2 13.8 1:3 (1 cement: 3 fine sand) 1:4 (1 cement: 4 fine sand) sqm sqm 107.80 97.90
15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : 13.8.1 13.8.2 1:3 (1 cement: 3 fine sand) 1:4 (1 cement: 4 fine sand) sqm sqm 122.50 110.70
13.9
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.
SUBHEAD -13.0 FINISHING
201
Code No
Description 13.9.1 13.9.2 12 mm cement plaster 20 mm cement plaster
Unit sqm sqm
Rate Rs. 112.80 154.00
13.10
15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall. CEMENT PLASTER IN TWO COATS
sqm
128.50
13.11
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) finished with a top layer 6mm thick cement plaster 1:6 (1 cement: 6 fine sand). 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) and a top layer 6mm thick cement plaster 1:3 (1 cement: 3 coarse sand) finished rough with sponge. 12 mm cement plaster 1:2 (1 cement: 2 stone dust) 15 mm cement plaster 1:2 (1 cement: 2 stone dust) on the rough side of single or half brick wall. 20 mm cement plaster 1:2 (1 cement: 2 stone dust) 6 MM CEMENT PLASTER
sqm
111.15
13.12
sqm sqm sqm sqm
123.50 105.65 123.90 154.20
13.13 13.14 13.15
13.16
6 mm cement plaster of mix : 13.16.1 1:3 (1 cement: 3 fine sand) sqm 62.15
13.17
6 mm cement plaster 1:3 (1 cement: 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams. Neat cement punning ROUGH CAST PLASTER
sqm sqm
85.55 21.40
13.18
13.19
Rough cast plaster upto 10m height above ground level with a mixture of sand and gravel or crushed stone from 6mm to 10mm nominal size dashed over and including the fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) and top layer 10mm cement plaster 1:3 (1 cement: 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. 13.19.1 Ordinary cement finish using ordinary cement sqm 196.00
PEBBLE DASH PLASTER 13.20 Pebble dash plaster upto 10m height above ground level with a mixture of washed pebble or crushed stone 6mm to 12.5mm nominal size dashed over and including fresh plaster in two layers under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) and top layer 10mm cement plaster with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.
sqm Per bag of 50 kg cement used
188.20
13.21
28.85
202
Code No 13.22 13.23
Description
Unit in the mix.
Rate Rs.
Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. Extra for plastering on circular work not exceeding 6 m in radius: 13.23.1 13.23.2 In one coat In two coats
sqm
16.80
sqm sqm
7.40 11.35
13.24
Extra for plastering done on moulding cornices or architraves including neat finish to line and level: 13.24.1 13.24.2 In one coat In two coats sqm sqm 103.75 170.50
13.25
Extra for plastering : 13.25.1 13.25.2 13.25.3 Spherical ceiling Groined ceiling Flewing soffits sqm sqm sqm sqm 27.50 30.15 17.90 47.20
13.26
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete ARTIFICIAL STONE PLASTER
13.27
Extra for lining out plaster to imitate stone or concrete blocks walling PLAIN CEMENT MORTAR BANDS
sqm
16.60
13.28
12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement: 4 fine sand) : 13.28.1 13.28.2 13.28.3 13.28.4 Flush Band Sunk Band Raised Band Moulded Band cm per metre cm per metre cm per metre cm per metre 1.35 1.45 1.65 2.60
13.29
18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement: 4 fine sand): 13.29.1 13.29.2 13.29.3 13.29.4 Flush Band Sunk Band Raised Band Moulded Band cm per metre cm per metre cm per metre cm per metre 1.70 1.85 2.05 3.55
13.30
18 mm thick moulded cement mortar band in two coats under layer 12mm thick with cement mortar 1:5 (1 cement: 5 coarse sand) top layer 6mm thick with cement mortar 1:4 (1 cement: 4 fine sand). POINTING OF BRICK WORK
cm per metre
3.55
13.31
Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement: 3 fine sand) :
203
Code No
Description 13.31.1 13.31.2 Flush / Ruled/ Struck or weathered pointing. Raised and cut pointing
Unit sqm sqm
Rate Rs. 45.40 72.90
POINTING ON TILE BRICK WORK 13.32 Pointing on tile brick work with cement mortar 1:3 (1 cement:3 fine sand) : 13.32.1 Flush/ Ruled/ Struck or weathered pointing sqm 62.60
POINTING ON STONE WORK 13.33 Pointing on stone work with cement mortar 1:3 (1 cement: 3 fine sand) : 13.33.1 13.33.2 13.34 13.35 Flush/ Ruled pointing Raised and cut pointing sqm sqm sqm 62.50 112.00 125.95
Raised and cut pointing on stone work in white cement mortar 1:3 (1 white cement: 3 marble dust) Pointing on stone slab ceiling with cement mortar 1:2 (1 cement: 2 fine sand): 13.35.1 Flush/ Ruled pointing
sqm sqm
36.45 3.10
13.36
Extra for pointing on walls on the outside at height more than 10 m from ground level for every additional height of 3 m or part there of. INTERIOR FINISHING
13.37
White washing with lime to give an even shade: 13.37.1 New work (three or more coats) sqm sqm 6.75 2.75
13.38 13.39
Satna lime wash on walls one coat Colour washing such as green, blue or buff to give an even shade : 13.39.1 13.39.2 New work (two or more coats) with a base coat of white washing with lime New work (two or more coats) with a base coat of whiting
sqm sqm
9.30 9.10
13.40
Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including priming coat of whiting to give an even shade. Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade 13.41.1 New work (two or more coats) over and including priming coat with cement primer.
sqm
26.30
13.41
sqm
41.55
13.42
Distempering with 1st quality acrylic washable distemper (ready mixed) of approved manufacturer and of required shade and colour complete. as per manufacturer's specification. 13.42.1 Two or more coats on new work. sqm 23.55
13.43
Applying one coat of cement primer of approved brand and manufacture on wall surface : 13.43.1 Cement primer. sqm 17.20
204
Code No 13.44
Description EXTERIOR FINISHING Finishing walls with water proofing cement paint of required shade : 13.44.1 New work (Two or more coats applied @ 3.84 kg/10 sqm).
Unit
Rate Rs.
sqm
30.80
13.45
Finishing walls with textured exterior paint of required shade : 13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.
sqm
96.25
13.46
Finishing walls with Acrylic Smooth exterior paint of required shade : 13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm).
sqm
50.40
13.47
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade 13.47.1 New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm).
sqm
60.10
13.48
Finishing walls with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : 13.48.1 Two or more coats applied @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10 sqm. Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture
sqm
62.25
13.48.2
sqm
51.55
13.48.3
sqm sqm
53.35 2.60
13.49 13.50
Extra for applying water proofing cement paint as primer applied @ 2.2 kg/ 10 sqm instead of primer for exterior finishing in Item No. 13.48.1 Applying priming coat : 13.50.1 13.50.2 13.50.3 With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat)
sqm sqm
16.55 15.75
sqm
12.65
13.50.4
sqm
7.15
205
Code No 13.51 13.52
Description Painting one thin coat with white lead of approved brand and manufacture on wet or patchy portion of plastered surfaces Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. 13.52.1 13.52.2 On steel work On concrete work
Unit
Rate Rs. 22.60
sqm
sqm sqm
75.25 77.75
13.53
Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.53.1 New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. sqm 37.55
13.54
Applying a coat of mordant solution on G.S. sheet : 13.54.1 13.54.2 With a solution of 38 gms of copper acetate in a litre of soft water With a solution made of 13 gms of hydrochloric acid in a solution of 13 gms each of copper chloride, copper nitrate and ammonium chloride dissolved in a litre of soft water. sqm 11.60
sqm
11.45
13.55
Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint approved brand and manufacture over and including a priming of ready mixed zinc chromate yellow primer on new work : 13.55.1 13.55.2 100 mm diameter pipes 150 mm diameter pipes metre metre 15.05 22.50
13.56
Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work. 13.56.1 13.56.2 100 mm diameter pipes 150 mm diameter pipes metre metre 16.35 24.35
13.57
Painting with oil type wood preservative of approved brand and manufacture: 13.57.1 New work (two or more coats) sqm 12.80
13.58
Providing and applying two coats of fire retardant paint unthinned on cleaned wood/ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant. Coal tarring two coats on new work using 0.16 and 0.12 litre coal tar per sqm in the first coat and second coat respectively. Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: 13.60.1 Two or more coats on new work
sqm sqm
229.80 14.65
13.59 13.60
sqm
40.05
206
Code No 13.61
Description Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 13.61.1 Two or more coats on new work
Unit
Rate Rs.
sqm
35.35
13.62
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
sqm
51.30
13.63
Painting with aluminium paint of approved brand and manufacture to give an even shade . 13.63.1 Two or more coats on new work sqm 28.60
13.64
Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade: 13.64.1 Two or more coats on new work. sqm 32.40
13.65
Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: 13.65.1 Two or more coats on new work. sqm 24.80
13.66
Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade: 13.66.1 Two or more coats on new work. sqm 37.05
13.67
Varnishing with varnish of approved brand and manufacture: 13.67.1 13.67.2 Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish. Two or more coats glue sizing with spar varnish or an under coat of flatting varnish. sqm sqm 49.20 50.80
13.68
French spirit polishing : 13.68.1 Two or more coats on new works including a coat of wood filler. sqm 75.60
13.69
Polishing on wood work with ready mixed wax polish of approved brand and manufacture : 13.69.1 New work sqm sqm per letter per cm height 35.80 16.15 0.90
13.70 13.71 13.72
Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture. Lettering with black Japan paint of approved brand and manufacture Washed stone grit plaster on exterior walls of height upto 10 M. above level in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer
sqm
262.20
207
Code No
Description with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-in- charge (Payment for providing grooves shall be made separately).
Unit
Rate Rs.
13.73
Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge : 13.73.1 13.73.2 15 mm wide and 15 mm deep groove 20 mm wide and 15 mm deep groove metre metre sqm sqm 13.30 13.65 40.75 22.90
13.74 13.75 13.76
Extra for washed grit plaster on exterior walls of height more than 10m from ground level for every additional height of 3 m or part thereof. Extra for washed stone grit plaster on circular work not exceeding 6m in radius (in two coats). Forming groove of uniform size from 12x12mm and upto 25x15mm in plastered surface as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repairs to the edges of plaster panel and finishing the groove complete as per specifications and direction of the Engineer-in-Charge. Extra for using white cement in place of ordinary cement in the top layer of the item of washed stone grit plaster. Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven background such as bare brick/ block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete.
metre sqm
13.30 60.40
13.77 13.78
sqm
143.10
208
SUB HEAD : 14.0
REPAIRS TO BUILDING
209
BASIC RATES (SH: 14.0 REPAIRS TO BUILDING)

Code No 0006 0011 0100 0101 0102 0103 0111 0112 0114 0115 0119 0123 0124 0128 0130 0131 0141 0155 0156 0295 0297 0302 0308 0367 0389 0390 0391 0392 0393 0394 0404 0405 0406 Description Unit Rate Rs. 173.00 300.00 138.45 138.45 151.50 141.60 151.50 141.60 135.25 135.25 141.60 151.50 141.60 138.45 151.50 141.60 138.45 146.55 146.55 700.00 700.00 29.00 200.00 4,500.00 200.00 158.00 106.00 317.00 216.00 173.00 84.00 65.00 44.00
Hire charges of Spraying machine including electric charges Hire charges of Pump set of capacity 4000 litres/hour. Bandhani Bhisti Blacksmith 1st class Blacksmith 2nd class Carpenter 1st class Carpenter 2nd class Beldar Coolie Glazier Mason (brick layer) 1st class Mason (brick layer) 2nd class Mate Mistry Painter White Washer Mason (average) Carpenter (average) Stone Aggregate (Single size) : 20 mm nominal size Stone Aggregate (Single size) : 10 mm nominal size Safeda ballies 125 mm diameter Bhusa Portland Cement Brass single acting spring hinges 150 mm Brass single acting spring hinges 125 mm Brass single acting spring hinges 100 mm Brass double acting spring hinges 150 mm Brass double acting spring hinges 125 mm Brass double acting spring hinges 100 mm Brass flush bolt 250 mm Brass flush bolt 150 mm Brass flush bolt 100 mm
Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day Day cum cum metre quintal tonne each each each each each each each each each
SUB HEAD 14.0 REPAIR TO BUILDING
211
Code No 0417 0418 0419 0420 0421 0422 0427 0429 0430 0442 0444 0445 0446 0449 0450 0452 0524 0525 0526 0527 0528 0585 0586 0587 0589 0595 0597 0608 0637 0639
Description Brass 150 mm floor door stopper (0.357kg) Brass hard drawn hooks and eyes 300 mm Brass hard drawn hooks and eyes 250 mm Brass hard drawn hooks and eyes 200 mm Brass hard drawn hooks and eyes 150 mm Brass hard drawn hooks and eyes 100 mm Brass quadrant stays 300 mm Brass fanlight pivot Brass chain with hook for fan light catch Brass helical spring 150 mm Brass curtain rod 20 mm dia 1.25 mm thick Brass curtain rod 25 mm dia 1.25 mm thick Brass brackets (curtain rods) 20 mm Brass screws 50 mm Brass screws 40 mm Brass screws 25 mm Chromium plated Brass butt hinges (heavy) type 75x65x4 .0 mm (200gms) Chromium plated Brass butt hinges (light/ordinary) type 125x70x4 mm Chromium plated Brass butt hinges (light/ordinary) type 100x70x4 mm Chromium plated Brass butt hinges (light/ordinary) type 75x40x2.5 mm Chromium plated Brass butt hinges (light/ordinary) type 50x40x2.5 mm Chromium plated Brass screws 50 mm Chromium plated Brass screws 40 mm Chromium plated Brass screws 30 mm Chromium plated Brass screws 20 mm Bright finished or black enamelled mild steel butt hinges 100x58x1.90 mm Bright finished or black enamelled mild steel butt hinges50x37x1.50 mm Nickel plated mild steel piano hinges 1 mm thick 35 mm wide Bright finished or black enamelled mild steel screws 40 mm Bright finished or black enamelled mild steel screws 25 mm
Unit each 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos each 10 Nos each each metre metre each 100 Nos 100 Nos 100 Nos 10 Nos 10 Nos 10 Nos 10 Nos 10 Nos 100 Nos 100 Nos 100 Nos 100 Nos 10 Nos 10 Nos metre 100 Nos 100 Nos
Rate Rs. 104.00 457.00 423.00 390.00 364.00 300.00 73.00 128.00 13.00 185.00 63.00 79.00 24.00 107.00 96.00 76.00 430.00 433.00 385.00 135.00 105.00 123.00 150.00 90.00 63.00 54.00 28.00 21.00 30.00 15.00
212
Code No 0640 0775 0811 0815 0816 0826 0827 0828 0829 0833 0835 0845 0851 0855 0856 0857 0858 0859 0863 0982 0999 1000 1003 1007 1008 1023 1034 1174 1186 1188 1189 1190 1194 1196
Description Bright finished or black enamelled mild steel screws 20 mm Dehradun white lime Mud (dry) Dry distemper Oil bound washable distemper/ Acrylic distemper Aluminium paint Acid proof paint (chocolate or black) Anticorrosive bituminous paint (black) Black Japan Synthetic enamel paint in black or chocolate shade Plastic emulsion paint Roofing paint for iron sheets in red colour Water proofing cement paint Wax polish (ready made) Ordinary varnish Superior copal varnish Superior spar varnish Oil type wood preservative Putty for wood work Coarse sand (zone III) Shellac Spirit Mild steel round bar above 12 mm dia Structural steel such as tees, angles channels and R.S. joists Flats up to 10 mm in thickness Galvanised steel J or L hooks 8 mm dia Bolts and nuts up to 300 mm in length Red sand stone slab 45 mm and 50 mm thick (un-dressed) Superior class teak wood such as Dandeli, Balarshah or Malabar in planks First class teak wood in planks Second class teak wood in scantling Second class teak wood in planks Second class deodar wood in planks First class kail wood in planks
Unit 100 Nos quintal cum kilogram kilogram litre litre litre litre litre litre litre kilogram kilogram litre litre litre litre kilogram cum kilogram litre quintal quintal quintal 10 Nos quintal sqm 10 cudm 10 cudm 10 cudm 10 cudm 10 cudm 10 cudm
Rate Rs. 15.00 295.00 20.00 26.00 40.00 89.00 93.00 52.00 65.00 115.00 140.00 95.00 36.00 150.00 49.00 100.00 105.00 60.00 24.00 600.00 192.00 37.00 3,050.00 3,100.00 2,900.00 58.00 4,300.00 145.00 895.00 506.00 394.00 410.00 335.00 186.00
213
Code No 1199 1208 1209 1213 1215 1314 1315 2201 2202 2203 2204 2205 2209 2216 2264 2406 2407 2466 2467 2602 4009 4202 7019 7241 7340 7442 8505 8506 8507 8508 9999
Description Sal wood in scantling Bitumen washer G.I. plain washer thick Water proofing materials Welding by electric plant C.P. brass chain with 32 mm dia rubber plug C.P. brass chain with 40 mm dia rubber plug Carriage of Bricks Carriage of Stone aggregate below 40 mm nominal size Carriage of Coarse sand Carriage of Timber Carriage of Steel Carriage of Cement Carriage of Stone blocks white & red sand stone & Kota stone slab Carriage of Rubbish Float glass sheet of nominal thickness 4 mm (weight not less than 10kg/sqm). Float glass sheet of nominal thickness 5.5 mm.(weight not less than 13.50 kg/sqm). Hollock wood in scantling Chromium plated Brass pull bolt lock (locking bolt) of size 85 mmx42 mm with screws, bolts, nuts and washers complete F.P.S. bricks class designation75 Mild steel tubes hot finished welded type Red oxide Zinc chromate primer Dash fastener Melamine polish Stainless steel pin . Wheel 75 mm dia. 40 mm wide Acrylic exterior paint Premium Acrylic exterior paint Textured exterior paint Primer for cement paint Sundries
Unit 10 cudm 100 Nos 100 Nos kilogram cm each each 1000 Nos cum cum cum tonne tonne tonne cum sqm sqm 10 cudm each 1000 Nos kilogram litre each litre kg each litre litre litre litre L.S.
Rate Rs. 218.00 18.00 27.00 20.00 1.00 21.00 22.00 141.88 53.21 53.21 60.81 47.29 47.29 47.29 53.21 248.00 340.00 217.00 130.00 1,900.00 38.00 58.00 8.00 228.00 130.00 52.00 123.00 202.00 183.00 52.00 2.60
214
14.0 REPAIRS TO BUILDING

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. meters and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : 14.1.1 14.1.2 With cement mortar 1:4 (1 cement : 4 fine sand) With cement mortar 1:4 (1cement: 4 coarse sand). sqm sqm 114.35 120.70
14.2
Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts embedding hold fasts in cement concrete blocks with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 meters lead : 14.2.1 14.2.2 14.2.3 Door chowkhats Window chowkhats Clerestory window chowkhats each each each 354.45 214.20 154.60
14.3
Fixing chowkhat in existing opening in brick / RCC wall with dash fasteners/chemical fasteners of appropriate size (3nos on each vertical member of door chowkhat and 2 nos. on each vertical member of window chowkhas including Cost of dash fasteners/ chemical fastener. Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground. 14.4.1 For door/ window/ clerestory window.
each
81.05
14.4
sqm
204.10
14.5
Renewing glass panes, with putty and nails wherever necessary: 14.5.1 14.5.2 Float glass panes of thickness 4 mm Float glass panes of thickness 5.5 mm sqm sqm 427.60 545.15
14.6
Renewing glass panes, with wooden fillets wherever necessary: 14.6.1 14.6.2 Float glass panes of thickness 4 mm Float glass panes of thickness 5.5 mm sqm sqm 498.55 616.10
14.7
Renewing glass panes and refixing existing wooden fillets: 14.7.1 14.7.2 Float glass panes of thickness 4 mm Float glass panes of thickness 5.5 mm sqm sqm 435.80 553.35
14.8
Supplying and fixing new wooden fillets wherever necessary: 14.8.1 2nd class teak wood fillets metre 16.95
SUBHEAD -14.0 REPAIRS TO BUILDING
215
Code No 14.9 14.10 14.11 14.12
Description 14.8.2 Hollock wood fillets.
Unit metre metre sqm sqm
Rate Rs. 14.40 9.90 128.55 102.65
Renewal of old putty of glass panes (length) Refixing old glass panes with putty and nails Fixing old glass panes with wooden fillets (excluding cost of fillets) Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab including cutting chase and making good and painting exposed portion of the clamps complete. Regrading terracing of mud phaska covered with tiles or brick, in cement by dismantling tiles or bricks, removing mud plaster preparing the surface of mud phaska to proper slope relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement : 3 fine sand) including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) within 50 metres lead. Replacing sand stone slabs in roofing laid in cement mortar 1:4 (1 cement : 4 coarse sand) including necessary repairs and cement pointing with same mortar complete including disposal of rubbish to dumping ground within 50 metres of lead : 14.14.1 Red/ white sand stone slabs 30 to 50 mm thick.
each
113.85
14.13
sqm
116.05
14.14
sqm
322.00
14.15
Renewing wooden battens in roofs, including making good the holes in wall and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : 14.15.1 Sal wood battens. cum 28,074.55
14.16
Renewing wooden beams in roofs including making good the holes in walls and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : 14.16.1 14.16.1.1 14.16.1.2 14.16.2 14.16.2.1 14.16.2.2 Not exceeding 4.00 metres in length. Sal wood beams Hollock wood beams Above 4.00 metres and upto 5.00 metres length. Sal wood beams Hollock wood beams cum cum 29,400.30 29,278.20 cum cum 28,950.90 28,831.20
14.17
Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the dumping ground within 50 metres lead. Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska : 14.18.1 14.18.2 With F.P.S. brick tiles With modular brick tiles
sqm
10.85
14.18
sqm sqm
24.90 25.60
216
Code No 14.19
Description Taking out wind ties from roof including cutting out rusted bolts, nuts etc. and removing materials to any distance within compound and stacking. Fixing of old wind tie with new fittings including painting two or more coats with anticorrosive bitumastic paint of approved brand & manufacturer over and including priming coat of ready mixed zinc chromate yellow primer of approved brand. Renewing bottom rail and/or top rubber of collapsible gate including making good all damages and applying priming coat of zinc chromate yellow primer of approved brand and manufacturer. Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/welding and erection etc. complete. 14.22.1 14.22.2 Wheel 50 mm dia. and below. Wheel above 50 mm dia.
Unit
Rate Rs.
kg
0.80
14.20
metre
34.35
14.21
kg
77.90
14.22
per wheel per wheel
88.15 127.50
EARTH WORK 14.23 14.24 Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. Mud mortar BRICK WORK 14.25 Brick work with bricks of class designation 75 in mud mortar WOOD WORK 14.26 Providing and fixing 25 mm thick shutters for cup board etc. : 14.26.1 14.26.1.1 14.26.1.2 14.26.2 14.26.2.1 14.26.2.2 14.27 Panelled or panelled & glazed shutters : Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Glazed shutters : Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. sqm sqm 2,538.20 1,638.75 sqm sqm 2,400.25 1,563.50 cum 1,590.25 kilo litre cum 40.75 156.85
Providing and fixing plain jaffri door and window shutters including bright or/and black enamelled M.S. butt hinges with necessary screws 35x10mm laths placed 35mm apart (frames to be paid separately) including fixing 50x12mm beading complete with 14.27.1 Second class teak wood. sqm 1,532.40
14.28
Providing and fixing curtain rods of 1.25mm thick brass plates with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete.
217
Code No
Description 14.28.1 14.28.2 20 mm diameter. 25 mm diameter.
Unit metre metre kg
Rate Rs. 116.20 134.75 44.40
14.29 14.30
Providing and fixing M.S. round or square bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows. Providing joists (karries) including hoisting fixing in position and applying wood preservative on unexposed surface etc. complete with: 14.30.1 14.30.2 Sal wood. Hollock wood.
cum cum
27,555.70 27,437.30
14.31
Providing and fixing bright finished brass single acting spring hinges with necessary screws etc. complete : 14.31.1 14.31.2 14.31.3 150 mm 125 mm 100 mm each each each 252.85 204.05 142.65
14.32
Providing and fixing bright finished brass double acting spring hinges with necessary screws etc. complete : 14.32.1 14.32.2 14.32.3 150 mm 125 mm 100 mm each each each 388.75 271.45 220.45
14.33
Providing and fixing bright finished brass flush bolts with necessary screws etc. complete : 14.33.1 14.33.2 14.33.3 250 mm 150 mm 100 mm each each each each 106.80 84.10 59.70 127.55
14.34 14.35
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, screws etc. to suit shutter thickness complete Providing and fixing bright finished brass hard drawn hooks and eyes : 14.35.1 14.35.2 14.35.3 14.35.4 14.35.5 300 mm 250 mm 200 mm 150 mm 100 mm
each each each each each each each each each
54.25 50.30 46.45 43.45 36.00 20.85 20.50 90.20 231.80
14.36 14.37 14.38 14.39
Providing and fixing bright finished brass fan light pivot with necessary screws etc. complete. Providing and fixing 300 mm long bright finished brass chain with hook for fan light including necessary screws etc. complete. Providing and fixing bright finished brass quadrant stay 300mm long with necessary screws etc. complete. Providing and fixing bright finished brass helical door spring (superior
218
Code No 14.40
Description quality). Providing and fixing chromium plated brass butt hinges with necessary screws etc. complete. 14.40.1 14.40.2 14.40.3 14.40.4 14.40.5 125x70x4 mm (ordinary type) 100x70x4 mm (ordinary type) 75x65x4 mm (heavy type) 75x40x2.5 mm (ordinary type) 50x40x2.5 mm (ordinary type)
Unit
Rate Rs.
each each each each each each
69.05 63.10 60.45 26.20 16.65 155.85
14.41
Providing and fixing 85x42mm chromium plated brass pull bolt lock with necessary screws, nuts, bolts and washers etc. complete. FINISHING
14.42
White washing with lime to give an even shade : 14.42.1 14.42.2 Old work (two or more coats) Old work (one or more coats) sqm sqm 4.10 2.55
14.43
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 14.45.1 Old work (one or more coats)
sqm
3.20
14.44
sqm
12.35
14.45
sqm
14.90
14.46
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 14.47.1 Old work (one or more coats)
sqm
4.25
14.47
sqm
18.45
14.48
Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture over and including a priming coat of ready mixed zinc chromate yellow primer on new work : 14.48.1 75 mm diameter pipes metre 11.20
14.49
Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work : 14.49.1 75 mm diameter pipes metre 5.40
14.50
Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with aluminium paint of approved brand and manufacture over a priming coat of ready mixed zinc chromate yellow primer on new
219
Code No
Description work : 14.50.1 75 mm diameter pipes
Unit
Rate Rs. 12.15
metre
14.51
Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 14.51.1 14.51.2 14.51.3 75 mm diameter pipes 100 mm diameter pipes 150 mm diameter pipes metre metre metre 5.90 7.60 10.80
14.52
Painting with oil type wood preservative of approved brand and manufacture : 14.52.1 Old work (one or more coats) sqm 9.90
14.53
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : 14.53.1 One or more coats on old work. sqm 25.85
14.54
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 14.54.1 One or more coats on old work. sqm 22.85
14.55
Painting with aluminium paint of approved brand and manufacture to give an even shade : 14.55.1 One or more coats on old work. sqm 18.25
14.56
Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade : 14.56.1 One or more coats on old work. sqm 21.05
14.57
Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade : 14.57.1 One or more coats on old work. sqm 16.65
14.58
French spirit polishing : 14.58.1 One or more coats on old work. sqm 38.40
14.59
Polishing on wood work with ready made wax polish of approved brand and manufacture : 14.59.1 Old work sqm Per letter per cm height Sqm 18.25
14.60
Re-lettering with black Japan paint of approved brand and manufacture.
0.55 18.80
14.61 14.62
Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade. Providing and fixing C.P. brass chain and rubber plug complete for sink or wash basin : 14.62.1 32 mm dia
each
33.75
220
Code No 14.63
Description 14.62.2 40 mm dia
Unit each
Rate Rs. 34.90
Distempering with 1st quality acrylic washable distemper (ready made) of approved manufacturer and of required shade and colour complete. as per manufacturer's specification. 14.63.1 One or more coats on old work. sqm 13.85
14.64
Finishing walls with water proofing cement paint of required shade : 14.64.1 Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat.
sqm
27.95
14.65
Finishing walls with textured exterior paint of required shade : 14.65.1 14.65.2 Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm. Old work (One or more coats) applied @ 1.82 ltr/10 sqm. sqm sqm 82.85 48.60
14.66
Finishing walls with Acrylic Smooth exterior paint of required shade : 14.66.1 14.66.2 Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). Old work (One or more coat applied @ 0.90 ltr/10 sqm). sqm sqm 36.30 22.80
14.67
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade 14.67.1 14.67.2 Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. Old work (one or more coats applied @ 0.83 ltr/10 sqm). sqm sqm 46.60 29.45
14.68
Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint approved brand and manufacture on old work : 14.68.1 14.68.2 100 mm diameter pipes 150 mm diameter pipes sqm sqm 7.05 10.05
14.69
Varnishing with varnish of approved brand and manufacture: 14.69.1 14.69.2 One or more coats with copal varnish. One or more coats with spar varnish. sqm sqm sqm sqm 21.00 21.90 45.15 18.90
14.70 14.71
Melamine polishing on wood work (one or more coat). Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work.
14.72
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40mm dia. M.S. tube
sqm
82.70
221
Code No
Description 1.5 m centre to centre horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The lavational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.
Unit
Rate Rs.
222
SUB HEAD : 15.0
DISMANTLING AND DEMOLISHING
223
BASIC RATES (SH:15.0 DISMANTLING AND DEMOLISHING)

Code No 0038 0039 0040 0041 0100 0101 0103 0112 0114 0115 0116 0117 0123 0124 0128 0130 0139 0761 0771 9999 Description Unit Rate Rs. 1,000.00 1,000.00 1,600.00 800.00 138.45 138.45 141.60 141.60 135.25 135.25 151.50 141.60 151.50 141.60 138.45 151.50 138.45 265.00 19.00 1.00
Tractor with ripper attachment. Tractor with trolley Air compressor 250 cfm with two leads for pneumatic cutters/ hammers. Joint cutting machine with 2-3 blades Bandhani Bhisti Blacksmith 2nd class Carpenter 2nd class Beldar Coolie Fitter (grade 1) Assistant Fitter or 2nd class Fitter Mason (brick layer) 1st class Mason (brick layer) 2nd class Mate Mistry Skilled Beldar (for floor rubbing etc.) Fuel wood Kerosene oil Sundries
per day per day day per day Day Day Day Day Day Day Day Day Day Day Day Day Day quintal litre L.S.
SUB HEAD 15.0 DISMANTLING AND DEMOLISHING
225
15.0 DISMANTLING AND DEMOLISHING

Code No
15.1
Description
Unit
Rate Rs.
Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer in charge. Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 15.2.1 15.2.2 1:3:6 or richer mix 1:4:8 or leaner mix
cum
128.45
15.2
cum cum
368.45 226.90
15.3
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge. Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer - in -charge. Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 15.7.1 15.7.2 15.7.3 15.7.4 In mud mortar In lime mortar with old mughal bricks In lime mortar In cement mortar
cum
537.55
15.4
cum
479.85
15.5
sqm kg
176.35 1.45
15.6 15.7
cum cum cum cum
106.45 268.25 128.45 310.75
15.8
Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured) : 15.8.1 15.8.2 15.8.3 From brick work in mud mortar From brick work in lime mortar From brick work in cement mortar 1000 nos 1000 nos 1000 nos 696.25 801.80 998.80
15.9
Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge: 15.9.1 15.9.2 In lime mortar In cement mortar cum cum 175.05 370.75
15.10
Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including
SUBHEAD -15.0 DISMANTLING AND DEMOLISHING
226
Code No
Description
stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge: 15.10.1 15.10.2 In lime mortar In cement mortar
Unit
Rate Rs.
cum cum
221.55 433.60
15.11
Removing mortar from and cleaning stones and concrete articles (net quantity of stacks of cleaned materials will be measured) : 15.11.1 15.11.2 In lime mortar In cement mortar cum cum 71.65 103.55
15.12
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 15.12.1 15.12.2 Of area 3 sq. metres and below Of area beyond 3 sq. metres each each 54.60 75.35
15.13
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: 15.13.1 15.13.2 Of area 3 sq. metres and below Of area beyond 3 sq. metres each each 21.40 28.25
15.14
Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead: 15.14.1 15.14.2 Of sectional area 40 square centimetres and above. Of sectional area below 40 square centimetres. cum metre 658.65 2.65
15.15
Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional span of one metre or part thereof beyond 10 metres : 15.15.1 15.15.2 Of sectional area 40 square centimetres and above. Of sectional area below 40 square centimetres. Cum per metre span Metre per metre span 95.55 0.25
15.16
Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional height of one metre or part thereof beyond 5 metres : 15.16.1 Of sectional area 40 square centimetres and above. Cum per metre height Metre per metre height
135.20
15.16.2
Of sectional area below 40 square centimetres.
0.50
15.17
Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: 15.17.1 15.17.2 R.S. Joists Channels, angles, tees and flats kg kg 0.50 0.35
227
Code No
15.18
Description
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50metres lead. Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge. Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional span of one metre or part thereof beyond 10 metres Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional height of one metre or part thereof beyond 5 metres. Extra for marking of structural steel work required to be re-erected. Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 15.23.1 15.23.2 For thickness of tiles 10 mm to 25 mm For thickness of tiles above 25 mm and up to 40 mm
Unit
Rate Rs.
kg
0.85
15.19
kg Kg per metre span Kg per metre height kg
0.60 0.15
15.20 15.21
0.15 0.65
15.22 15.23
sqm sqm
10.90 16.60
15.24
Demolishing dry brick pitching in floors, drains etc. including stacking serviceable material and disposal of unserviceable material within 50 metres lead : Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Demolishing mud phaska in terracing and disposal of material within 50 metres lead. Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 metres lead of: 15.28.1 15.28.2 G.S. Sheet Asbestos sheet
cum
199.55
15.25
sqm
40.50
15.26
sqm cum
15.45 137.90
15.27 15.28
sqm sqm
24.70 11.75
15.29
Dismantling stone slab roofing over wooden karries or R.C.C. battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Dismantling jack arch roofing and floors including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Dismantling tiled roofing with battens boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Demolishing thatch roofing including mats, bamboo, jaffari etc. complete including stacking of serviceable material and disposal of
cum
405.25
15.30
sqm
38.65
15.31
sqm sqm
32.05 8.90
15.32
228
Code No
15.33 15.34
Description
unserviceable material within 50 metres lead. Dismantling wooden ballies in posts and struts including stacking within 50 metres lead. Dismantling and stacking within 50 metres lead, fencing posts or struts including all earth work and dismantling of concrete etc. in base of : 15.34.1 15.34.2 T or L iron or pipe R.C.C.
Unit
Rate Rs.
metre
3.15
each each
44.85 53.05
15.35
Cutting ballies or wooden posts of fencing at the point of projection above the concrete or ground and stacking the same within 50 metres lead. Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. Dismantling wooden trellis work excluding frames but including stacking the serviceable material within 50 metres lead. Dismantling expanded metal or I.R.C. fabrics with necessary battens and beading including stacking the serviceable material within 50 metres lead. Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : 15.39.1 15.39.2 15.39.3 Up to 10 mm thick Thickness above 10 mm up to 25 mm Thickness above 25 mm up to 40 mm
each kg sqm
4.85 5.55 9.80
15.36 15.37 15.38
sqm
11.55
15.39
sqm sqm sqm
9.35 11.95 14.25
15.40
Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead: 15.40.1 15.40.2 Thickness up to 40 mm Thickness above 40 mm up to 75 mm sqm sqm 44.10 66.05
15.41
Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 15.42.1 15.42.2 15.42.3 75 to 80 mm dia pipe. 100 mm dia pipe 150 mm dia pipe
sqm
8.60
15.42
metre metre metre
11.40 11.80 12.20
15.43
Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50metres lead as per direction of Engineer-in-charge : 15.43.1 15.43.2 Water bound macadam road bituminous road sqm sqm 34.30 66.30
229
Code No
15.44
Description
Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15.44.1 15.44.2 15 mm to 40 mm nominal bore Above 40 mm nominal bore
Unit
Rate Rs.
metre metre
24.90 29.05
15.45
Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineerin-charge: 15.45.1 15.45.2 15.45.3 Up to 150 mm diameter Above 150 mm dia up to 300 mm dia. Above 300 mm diameter metre metre metre 63.45 86.00 113.20
15.46
Dismantling steel cylinder R.C. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metres lead as per direction of Engineer-in-charge: 15.46.1 15.46.2 Up to 600 mm diameter Above 600 mm diameter metre metre 113.20 279.20
15.47
Dismantling asbestos cement pressure pipes including excavation and refilling trenches after taking out the pipes manually/ by mechanical means and stacking the pipes within 50 metres lead as per direction of Engineer-in-charge: 15.47.1 15.47.2 Up to 150 mm diameter Above 150 mm diameter metre metre 49.85 60.65
15.48
Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge. Taking out C.I. cover with frame from R.C.C. top slab of inspection chambers of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge. Dismantling of R.C.C. spun vent shaft including excavating the cement concrete pit completely, taking out the shaft, refilling the excavated gap, stacking the useful materials near the site and disposal of unserviceable materials within 50 metres lead. Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including
each
110.35
15.49
each
65.05
15.50
each
711.50
15.51
each
149.50
230
Code No
15.52
Description
refilling the excavated gap. Dismantling of flushing cistern of any size including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres 15.53.1 15.53.2 Up to 150 mm diameter Above 150 mm diameter
Unit
Rate Rs.
each
143.35
15.53
each each each
52.70 178.50 105.70
15.54 15.55
Dismantling of spindle fire hydrant including stacking of useful materials within 50 metres lead. Dismantling of cement concrete platform along with curtain walls and base concrete etc. including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead : 15.55.1 15.55.2 15.55.3 120 x 120 cm (outside to outside) 210 x 120 cm (outside to outside) 320 x 120 cm (outside to outside)
each each each
166.60 255.65 361.65
15.56
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. Demolishing C.C. /R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1000m, stacking serviceable and unserviceable material separately including cutting reinforcement bars. Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material up to a lead of 1000 metres, as per direction of Engineer-in-charge.
sqm
8.20
15.57
sqm
8.65
15.58
cum
731.05
15.59
cum
106.20
231
SUB HEAD : 16.0
ROAD WORK
233
BASIC RATES (SH: 16.0 ROAD WORK)

Code No 0001 0002 0003 0005 0007 0008 0013 0014 0016 0017 0018 0021 0022 0029 0030 0033 0038 0042 0043 0045 0046 0047 0048 0100 0101 0102 0103 0113 0114 0115 0123 0124 Description Unit Rate Rs. 595.00 400.00 1,000.00 1,008.00 250.00 7,050.00 200.00 6,000.00 515.00 1,030.00 800.00 288.00 330.00 18.00 1,600.00 680.00 1,000.00 88,000.00 480.00 12,000.00 800.00 800.00 800.00 138.45 138.45 151.50 141.60 135.25 135.25 135.25 151.50 141.60
Hire charges of Coaltar Boiler 900 to 1400 litres Hire charges of Concrete Mixer 0.14 cubic metre Hire charges of Diesel Road Roller - 8 to 10 tonne Hire charges of Diesel Truck - 9 tonne Hire charges of Coaltar Sprayer Hire charges of Barber green, drying, mixing and Asphalt Plant, with accessories, capacity 30/45 tonne Machine for rubbing of floors Front end loader Mastic Cooker Hire and running charges of tipper Hire and running charges of loader. Pin vibrator Surface Vibrator Carriage of concrete by transit mixer. Generator 250 KVA. Paint applicator. Tractor with ripper attachment. C.C .batch mix plant. Road sweeper Slip form paver with sensor. Water tanker/5000 ltr. capacity Concrete joint cutting machine. Texturing machine. Bandhani Bhisti Blacksmith 1st class Blacksmith 2nd class Chowkidar Beldar Coolie Mason (brick layer) 1st class Mason (brick layer) 2nd class
Day Day Day Day Day Day Day Day Day Day Day Day Day km/ cum per day per day per day day day day day day day Day Day Day Day Day Day Day Day Day
SUB HEAD 16.0 ROAD WORK
235
Code No 0126 0128 0130 0131 0138 0139 0155 0157 0286 0287 0291 0292 0293 0294 0295 0296 0297 0298 0304 0309 0310 0312 0313 0314 0317 0364 0365 0367 0370 0588 0777 0784 0810 0979
Description Mason (for ornamental stone work) 1st class Mate Mistry Painter Sprayer (for bitumen, tar etc.) Skilled Beldar (for floor rubbing etc.) Mason (average) Operator (Pile/ Special machine) Brick Aggregate (Single size) : 50 mm nominal size Brick Aggregate (Single size) : 40 mm nominal size Stone Aggregate (Single size) : 63 mm nominal size Stone Aggregate (Single size) : 50 mm nominal size Stone Aggregate (Single size) : 40 mm nominal size Stone Aggregate (Single size) : 25 mm nominal size Stone Aggregate (Single size) : 20 mm nominal size Stone Aggregate (Single size) : 12.5 mm nominal size Stone Aggregate (Single size) : 10 mm nominal size Stone Aggregate (Single size) : 06 mm nominal size Bajri Paving bitumen S-90 of approved quality Bitumen emulsion Bitumen grade PMB - 40 Blown type petroleum bitumen of penetration 85/25 of approved quality Bitumen hot sealing compound : grade A Premoulded joint filler 12 mm thick Wire brush Soft brush Portland Cement Coal (steam) Chromium plated Brass screws 25 mm Dry hydrated lime (factory made) Marble dust/ powder Moorum Royalty for good earth
Unit Day Day Day Day Day Day Day Day cum cum cum cum cum cum cum cum cum cum cum tonne tonne M.T. tonne kilogram sqm each each tonne quintal 100 Nos quintal cum cum cum
Rate Rs. 151.50 138.45 151.50 141.60 138.45 138.45 146.55 166.00 355.00 360.00 600.00 625.00 650.00 675.00 700.00 700.00 700.00 750.00 510.00 22,500.00 19,500.00 30,000.00 25,000.00 20.00 300.00 15.00 12.00 4,500.00 300.00 83.00 177.00 800.00 310.00 11.00
236
Code No 0982 0983 1007 1021 1028 1029 1030 1151 1158 1159 1235 1241 1980 2200 2201 2202 2203 2205 2206 2208 2209 2211 2215 2216 2241 2260 2261 2265 2267 2302 2311 2314 2335 2342
Description Coarse sand (zone III) Fine sand (zone IV) Structural steel such as tees, angles channels and R.S. joists Hard drawn steel wire fabric Straining bolts Galvanised steel barbed wire Galvanised steel turn buckles Boundary stone top chisel dressed 15x15x90 cm Stone for pitching 15 cm x 22.5 cm Stone dust Diesel oil Commercial LPG in cylinder. Fly ash Carriage of steam coal Carriage of Bricks Carriage of Stone aggregate below 40 mm nominal size Carriage of Coarse sand Carriage of Steel Carriage of Stone aggregate 40 mm nominal size and above Carriage of Lime Carriage of Cement Carriage of Tar bitumen Carriage of Soling stone & masonry stone Carriage of Stone blocks white & red sand stone & Kota stone slab Carriage of Good earth Carriage of Brick aggregate Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna sand) Carriage of Moorum Carriage of Stone dust Carriage of G.I. sheet and accessories Carriage of Red bajri Carriage of Barbed wire Carriage of Jamuna sand Carriage of solvent/ Diesel.
Unit cum cum quintal sqm each quintal each each cum cum litre kg cum tonne 1000 Nos cum cum tonne cum cum tonne tonne cum tonne cum cum cum cum cum tonne cum tonne cum quintal
Rate Rs. 600.00 320.00 3,100.00 310.00 50.00 4,400.00 9.00 46.00 332.00 700.00 30.25 35.00 6.00 60.81 141.88 53.21 53.21 47.29 57.83 53.21 47.29 53.21 62.60 47.29 66.51 57.83 53.21 53.21 53.21 47.29 53.21 47.29 53.21 5.32
237
Code No 2602 2704 2901 2902 2903 2904 2908 2909 2910 2911 2914 2916 5001 6501 7254 7255 7256 7309 7318 7382 7426 7739 7741 7742 8685 8686 8687 8688 8689 8690 8691 8692 8693 8694
Description F.P.S. bricks class designation75 Aluminium Strip 40 mm wide and 2 mm thick Stone Aggregate (Single size) : 100 mm nominal size Stone Aggregate (Single size) : 80 mm nominal size Stone chippings/ screenings 4.75 mm nominal size Stone chippings/ screenings 150 micron nominal size Over burnt (Jhama) Brick Aggregate: 120 mm to 40 mm size Over burnt (Jhama) Brick Aggregate: 90 mm to 40 mm size Stone chippings/ screenings 12.5/ 13.2 mm nominal size Stone chippings/ screenings 10/ 11.2 mm nominal size Solvent Paving Asphalt 80/100 penetration Mobil oil Sand zone V (Jamuna) Hardening Compound Road marking paint (spirit based) Superior quality road marking paint Paving Asphalt 60/70 penetration Plasticizer / super plasticizer Bitumen emulsion rapid setting (R.S.) confirming to IS : 8887-1995 Cat's eye Modified Bitumen Refinery produced CRMB - 55 Modified Bitumen Refinery produced CRMB - 60 Bitumen emulsion medium setting (M.S.) confirming to IS : 8887-1995 Delineator Precast C.C. Kerb stone M - 25 Thermoplastic paint Glass beads Interlocking C.C. paver block ( 60 mm thick, M-30 ) High intensity retro - reflective sheet. Punched tape concertina coil 600 m dia. 10m openable length (Total length 90m) RBT reinforced barbed wire. Turn buckle and strengthening bolt. Precast pavement slab 450 x 450 x 50mm (M - 30).
Unit Nos kilogram cum cum cum cum cum cum cum cum kilogram tonne litre cum litre litre litre tonne kilogram tonne each Tonne tonne tonne each cum kg kg sqm sqm bundle metre each set each
Rate Rs. 1,900.00 195.00 575.00 575.00 800.00 800.00 285.00 320.00 700.00 700.00 18.00 22,500.00 95.00 175.00 29.00 97.00 148.00 23,200.00 30.00 32,000.00 450.00 26,000.00 26,300.00 19,500.00 560.00 3,500.00 67.22 68.00 225.00 1,400.00 650.00 7.50 35.00 40.00
238
Code No 8695 8696 8697 9999
Description Chain link fabric fencing mesh of size 50x50mm made of G.I. wire of dia. 4mm. Chain link fabric fencing mesh of size 50x50mm made of G.I. wire of dia. 4mm, PVC coated to outer dia. 5mm. Chain link fabric fencing mesh of size 25x25mm made of G.I. wire of dia. 3mm. Sundries
Unit sqm sqm sqm L.S.
Rate Rs. 225.00 250.00 300.00 1.00
239
16.0 ROAD WORK

ROADS 16.1 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm. depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth lead upto 50 metres. Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density). Supplying and stacking at site. 16.3.1 16.3.2 16.3.3 16.3.4 16.3.5 16.3.6 16.3.7 16.3.8 16.3.9 16.3.10 16.4 90 mm to 45 mm size stone aggregate. 63 mm to 45 mm size stone aggregate. 53 mm to 22.4 mm size stone aggregate. Over burnt (Jhama) brick aggregate 120 mm to 40 mm. Over burnt (Jhama) brick aggregate 90 mm to 45 mm. Stone screening 13.2 mm nominal size (Type A). Stone screening 11.2 mm nominal size (Type B). Red bajri Good earth. Moorum. cum cum cum cum cum cum cum cum cum cum 742.30 768.45 810.55 398.20 438.85 892.25 979.40 654.15 144.05 421.85
sqm
33.90
16.2
cum
4.50
16.3
Laying spreading and compacting stone aggregate of specified sizes to WBM specifications including spreading in uniform thickness, hand picking , rolling with 3 wheeled road / vibratory roller 8-10 tonne in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate watering and compacting to the required density . Laying water bound macadam sub-base with brick aggregate and blinding material, earth etc. including screening, sorting and spreading to template and consolidation with light power road-roller etc. complete.(payment for brick aggregate and moorum etc. to be made separately) 16.5.1 16.5.2 Over burnt (Jhama) brick aggregate 120 mm to 40 mm. Over burnt (Jhama) brick aggregate 90 mm to 45 mm.
cum
192.55
16.5
cum cum
136.20 136.20
16.6
Supplying, stacking and Spreading 6 mm thick red bajri, watering and rolling complete including preparation of the surface and rolling. 16.6.1 With road roller/ hand roller. sqm 6.70
16.7
Brick edging in full brick width and half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 metres.
SUBHEAD -16.0 ROAD WORK
240
Code No
Description
Unit
Rate Rs.
52.35
16.7.1 16.8
With F.P.S. bricks of class designation 75
metre
Brick edging laid lengthwise with half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 metres : 16.8.1 With F.P.S. bricks of class designation 75 metre 14.90
16.9
Scarifying metalled (water-bound) road surface including disposal of rubbish lead upto 50m and consolidation of the aggregate received from scarifying with power road roller of 8 to 10tonne capacity. Making bajri path including preparation of subgrade, supplying and laying brick aggregate of 50mm nominal size 7.5 cm deep with blinding material consisting of 12 mm moorum and 12 mm red bajri consolidated with road roller. Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete. Dry brick pitching half brick thick in drains including supply of bricks and preparing the surface complete : 16.12.1 With F.P.S. bricks of class designation 75
sqm
6.45
16.10
sqm sqm
69.95 211.10
16.11 16.12
sqm
183.55
16.13
Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required. 16.13.1 16.13.2 bituminous portion Water bound macadam. cum cum sqm 1,081.80 572.45 53.25
16.14
Cutting bajri paths and making good the same including supply of extra quantities of brick aggregate, moorum and red bajri required. FENCING
16.15
Supplying at site : 16.15.1 R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-in-charge (cost of earth works in excavation, concrete works in foundation to be paid separately). Welded steel wire fabric of required width rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming & Painting to be paid for separately).
cum
11,547.90
16.15.2
kg each set
46.50 88.15
16.16 16.17
Supplying and fixing turn buckles and straining bolts for barbed wire fencing. Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire 9.38 kg per 100 metres (min) between the two posts fitted and fixed with G.I.
241
Code No
Description
Unit
Rate Rs.
staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) :- Payment to be made per metre cost of total length of barbed wire used. 16.17.1 16.18 With G.I. barbed wire metre 5.85
Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire 9.38 kg per 100 m (minimum) between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately) :- Payment to be made per metre cost of total length of barbed wire used. 16.18.1 With G.I. barbed wire metre 8.45
16.19
Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. Welded steel wire fabric fencing with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1 cement:5 fine sand : 10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, provided with welded steel wire fabric fixed between the posts fitted and fixed with G.I. staples on wooden plugs or tied to 6 mm bar nibs with G.I. binding wire (cost of posts, welded steel wire fabric, painting, earth work in excavation and concrete to be paid for separately) : ROAD SIGNS
Kg.
43.35
16.20
sqm
11.50
16.21
Engraving letters in hard stone
per cm height per letter
1.55
16.22
Providing and fixing 15x15x90cm boundary stone of hard stone with top 30 cm chisel dressed on all four sides and on top (cost of excavation, refilling and concrete etc. to be paid for separately). Providing and fixing 15cm dia at top 20cm at bottom and 90cm high precast reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) boundary stone as per standard design including finishing smooth with cement mortar 1:3 (1 cement : 3 fine sand) (cost of excavation, refilling and concreting to be paid for separately). Providing and fixing precast reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) kilometre stone as per standard design including finishing smooth in 1:3 cement mortar (1 cement : 3 fine sand) but excluding the cost of earth work, concrete in foundation, painting and lettering etc. which shall be
each
77.10
16.23
each
258.15
16.24
242
Code No
Description
Unit
Rate Rs.
paid for separately. 16.24.1 16.24.2 16.24.3 35x111x25 cm size. 50x152.5x25 cm size. 35x93.5x18 cm size. each each each 1,094.45 1,565.50 740.20
SURFACE DRESSING 16.25 Surface dressing on new surface with paving bitumen of grade A-90/S-90 of approved quality using 2.25 kg of bitumen per sqm with 1.65 cum of stone chippings 13.2 mm nominal size per 100 sqm of road surface including consolidation with road roller of 6 to 8 tonne capacity etc. complete: Surface dressing on new surface in two coats with bitumen of grade A90/S-90 of approved quality using 1.8kg.of bitumen per sqm with 1.5cum of stone chippings 13.2mm nominal size per 100 sqm of road surface for first coat and 1.1kg. of bitumen per sqm. with 1.00 cu. metre of stone chippings 11.2mm nominal size per 100 sqm. of road surface for second coat including consolidation of each coat separately with road roller of 6 to 8 tonne capacity etc. complete. Surface dressing on old surface with hot bitumen of grade A-90/ S-90 of approved quality using 1.95 kg of bitumen per sqm. with 1.50 cum of stone chippings 11.2 mm nominal size per 100 sqm of road surface including consolidation with road roller of 6 to 8 tonne capacity, etc. complete. Surface dressing one coat on new surface with bitumen of specified grade at a rate of 1.95 kg/sqm. of surface area with 1.5 cum. of stone chippings 13.2 mm nominal size per 100 sqm. of road surface including consolidation with road roller of 6 to 8 tonne capacity , etc. complete : 16.28.1 16.29 Using bitumen emulsion (minimum 50% bitumen content RS grade conforming to IS : 8887). sqm 70.10
sqm
89.40
16.26
sqm
121.15
16.27
sqm
74.05
16.28
Surface dressing one coat on old surface with bitumen of specified grade at the rate of 1.22 kg/ sqm of surface area with 1.10 cum of stone chippings 11.2 mm nominal size per 100 sqm. of road surface including consolidation with road roller of 6 to 8 tonne capacity etc. complete : 16.29.1 Using bitumen emulsion (minimum 50% bitumen content RS grade conforming to IS : 8887). sqm 44.85
PREMIX CARPET 16.30 Providing and applying tack coat using hot straight run bitumen of grade 80/ 100 including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications : 16.30.1 16.30.2 16.31 On W.B.M. @ 0.75 Kg / sqm. On bituminous surface @ 0.50 Kg / sqm. sqm sqm 23.90 17.15
Providing and applying tack coat using bitumen emulsion (Rapid Setting) complying with IS 8887-1995, spraying the bitumen emulsion with
243
Code No
Description
Unit
Rate Rs.
mechanically operated spray unit, cleaning and preparing the existing road surface as per specifications : 16.31.1 16.31.2 On W.B.M @ 0.4kg/sqm. On bituminous surface @ 0.25kg/sqm. sqm sqm 18.00 12.35
Note : Use of this item shall be restricted only for sites at sub zero temperature or for emergency applications. 16.32 2 cm premix carpet surfacing with 1.8 cum and 0.90 cum of stone chippings of 13.2 mm size and 11.2 mm size respectively per 100 sqm. and 52 kg. and 56 kg. of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively including a tack coat with hot straight run bitumen including consolidation with road roller of 6 to 9 tonne capacity etc. complete: (tack coat to be paid for separately). 16.32.1 16.32.2 16.32.3 16.33 With paving Asphalt 80 /100 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt. With paving Asphalt 60/70 with no solvent With Refinery Modified Bitumen CRMB 55 conforming to IRC : SP : 53-1999. sqm sqm sqm 81.95 81.00 87.80
2.5 cm premix carpet surfacing with 2.25 cum and 1.12 cum of stone chippings of 13.2mm and 11.2mm size respectively per 100 sqm. and 52 kg. and 56 kg. of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively including a tack coat with hot straight run bitumen including consolidation with road roller of 6 to 9 tonne capacity etc. complete. (tack coat to be paid for separately) : 16.33.1 16.33.2 16.33.3 With paving Asphalt 80/100 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt. With paving Asphalt 60/70 with no solvent With Refinery Modified Bitumen CRMB 55 conforming to IRC: SP: 53-1999. sqm sqm sqm 100.35 99.15 107.65
16.34
2 cm premix carpet surfacing with 2.4cum of stone chippings 11.2 mm nominal size per 100 sqm and bitumen emulsion (medium setting min. 65% bitumen content) complying with IS : 8887-1995 using 96kg per cum of chipping including consolidation with road roller of 6 to 9 tonne capacity etc. complete. 2.5 cm premix carpet surfacing with 3 cum of stone chippings 10 mm nominal size per 100 sqm and bitumen emulsion (medium setting min. 65% bitumen contents) complying with IS : 8887-1995 using 96 kg per cum of chippings of road surface including consolidation with road roller etc complete. Providing and laying Bitumen Penetration Macadam with hard stone aggregate of quality, size and grading as specified, with bitumen of suitable penetration grade including required key aggregate as specified, spreading coarse aggregate with the help of self propelled / tipper tail mounted aggregate spreader and applying bitumen by a pressure distributor and then spreading key aggregate with the help of aggregate
sqm
81.95
16.35
sqm
101.15
16.36
244
Code No
Description
Unit
Rate Rs.
spreader complete including consolidation with road roller of minimum 8 to 10 tonne capacity to achieve specified values of compaction and surface accuracy : 16.36.1 For 50mm compacted thickness using coarse aggregate of size 50-20 mm graded @ 0.60 cum per 10 sqm key aggregate of size 12.5 mm graded @ 0.15 cum per 10 sqm. With paving asphalt 80/100 @ 50 kg/10 sqm. For 75 mm compacted thickness in two layers using stone aggregate of size 63-41 mm graded @ 0.90 cum per 10 sqm key aggregate of size 20.0 mm graded @ 0.18 cum per 10 sqm. With paving asphalt 80/100 @ 68 kg/10 sqm.
sqm
219.75
16.36.2
sqm
311.60
MASTIC AND BITUMASTIC WEARING COURSE 16.37 Providing and laying bitumen mastic wearing course (as per specifications) with industrial bitumen of grade 85/25 conforming to IS : 702 prepared by using mastic cooker and laid to required level and slope including providing antiskid surface with bitumen precoated fine grained hard stone chipping of approved size at the rate of 0.005 cum per 10 sqm and at approximates spacing of 10cm centre to centre in both directions, pressed into surface protruding 1mm to 4mm over mastic surface, including cleaning the surface, removal of debris etc. all complete. ( Considering bitumen using 10.2% as per MORTH specification .) 16.37.1 16.37.2 16.38 25mm thick. 40 mm thick sqm sqm 493.45 789.50
2.5 cm thick bitumastic sheet with hot bitumen of approved quality using stone chippings (60% 12.5 mm nominal size and 40% 10 mm nominal size) @ 1.65 cum per 100 sqm and coarse sand at 1.65 cum per 100 sqm of road surface and with bitumen @ 56 kg/cum of stone chippings and @ 128 kg/cum. of sand over a tack coat with hot straight run bitumen including consolidation with road roller of 8 to 10 tonne etc. complete. (tack coat to be paid separately) : 16.38.1 16.38.2 16.38.3 With paving Asphalt 80/100 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt. With paving Asphalt 60/70. With Refinery Modified Bitumen CRMB 55 conforming to IRC: SP : 53-1999. sqm sqm sqm 134.45 132.50 146.80
16.39
4 cm thick bitumastic sheet with hot bitumen of approved quality using stone chippings (60% 12.5mm nominal size and 40% 10mm nominal size) @ 2.60cum per 100 sqm and coarse sand at 2.60cum per 100 sqm of road surface and with bitumen @ 56 kg/cum. of stone chippings and at 128 kg/cum of sand over a tack coat with hot straight run bitumen including consolidation with road roller of 8 to 10 tonne etc. complete. (tack coat to be paid separately) : 16.39.1 With paving Asphalt 80/100 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt. sqm 208.10
245
Code No
Description
Unit
Rate Rs.
205.00 227.60
16.39.2 16.39.3 SEAL COAT 16.40
With paving asphalt 60/70 with no solvent With Refinery Modified Bitumen CRMB 55 conforming to IRC: SP : 53-1999.
sqm sqm
Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade 80 / 100 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road roller all complete. Providing and laying seal coat over prepared surface of road with bitumen heated in bitumen boiler fitted with the spray set spraying using 98 kg of bitumen of grade 80/100 and blinding surface with 0.90cum of stone aggregate of 6.7 mm size (Passing 11.2mm sieve and retained on 2.36mm sieve) per 100 sqm of road surface including rolling and finishing with power road roller all complete. Note : Seal coat items to be operated only with the prior approval of Chief Engineer concerned. CONCRETE PAVEMENT
sqm
36.85
16.41
sqm
50.00
16.42
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete. Providing and laying design mix cement concrete in roads, taxi tracks and runways having a minimum works test beam flexural strength of 30 kg. per cm2. at 28 days using not less than 340 Kg. of cement per cum of finished concrete, coarse sand and graded stone aggregate of 40mm nominal size in appropriate proportions as per specified design criteria approved by Engineer-in-charge mechanically vibrated using needle and surface vibrators including steel form work with sturdy M. S. channel sections including curing and providing and filling construction joints and dummy joints with approved joint filler and primer including rounding of the edges and filling the grooves 10x25mm deep at top for construction joints and 10mmx50mm deep at top for dummy joints with joint sealing compound (conforming to grade B of IS : 1834) including making necessary arrangements for expansion joints etc. all complete. Extra for providing and mixing hardening compound of approved quality as per manufacturer's specification in cement concrete. Providing and fixing in position pre-moulded joint filler in expansion joints.
cum
3,340.25
16.43
cum litre Per cm depth per cm width per m length
3,692.40 33.70
16.44 16.45
2.00
16.46
Providing and laying in position bitumen hot sealing compound for expansion joints etc.
246
Code No
16.46.1
Description
Unit
Rate Rs.
Using grade A sealing compound.
Per cm depth per cm width per m length
1.10
PAINTING ROAD / RUNWAY MARKING 16.47 Painting runway/taxi track/apron marking with adequate no. of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-in-charge i/c cleaning the surface of all dirt, scales, oil, grease and other foreign material etc. and lining out complete. 16.47.1 16.47.2 16.48 New work (Two or more coats) Old work (One or more coats) sqm sqm 70.15 43.10
Painting road surface marking with adequate no. of coats to give uniform finish with ready mixed road marking paint conforming to IS : 164, on bituminous surface in white/yellow shade including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete. 16.48.1 16.48.2 New work (Two or more coats). Old work (One or more coats) sqm sqm 58.10 37.40
MISCELLANEOUS 16.49 Making bell mouth opening/ entrance of size 100x50x50cm for drainage pipe under footpath including providing cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) for shape of bell mouth including plastering providing and fixing precast R.C.C./ S.F.R.C. slab including plastering with cement mortar 1:3 (1 cement : 3 fine sand) of 6 mm thickness on exposed surface of the slab & bell mouth including centring, shuttering & neat cement punning inside the bell mouth etc. all complete. Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 +/-5 degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge. Preparation of sub-base road pavement with commercial dry lime (slaked), fly ash stabilised soil with a mix of 3% lime, 12% fly ash and 85% local suitable soil by weight, so as to achieve minimum field C.B.R. of 20 including mixing, rolling with road roller curing etc. all complete.
each
1,034.60
16.50
each
536.60
16.51
247
Code No
Description
Unit
Rate Rs.
323.20
16.51.1 16.52
Minimum thickness 15 cm.
cum
Providing and fixing precast lime fly ash concrete blocks 1:2:3:6 (1lime: 2 fly ash : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including finishing with 10mm thick cement mortar 1:3 (1 cement : 3 coarse sand) in foot paths including preparation of sub grade with a hand rammer, laying 10 mm thick leveling course of fine sand (jamuna sand) and filling the joints with fine sand. NEW ITEMS/ MODIFIED ITEMS
cum
3,138.55
16.53
Providing and fixing concertina coil fencing with required dia 610 mm(having 15 nos. round per 6 metre length) up to 3m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. stud tied with G.I. staples and G.I. clips to retain horizontal including necessary bolts or G.I. barbed wire tied to angle iron all complete as per direction of Engineer-in-charge with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) Providing and laying Dense Bituminous macadam on prepared surface with specified graded crushed stone aggregate for profile corrective base/ binding course including loading of aggregate with FE loader and hot mixing of stone aggregate, filler and bitumen in hot mix plant, transporting the mixed material by tippers to paver and laying the mixed material with paver finisher fitted with electronic sensing device to the required level and grade and rolling by road roller as per MORTH specifications, to achieve the desired density, but excluding the cost of primer / tack coat. 16.54.1 50/75mm average compacted thickness with bitumen of 60/70 grade @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate).
metre
180.25
16.54
cum
5,366.50
16.55
Providing and laying Bituminous Macadam on prepared surface with specified graded crushed stone aggregate for profile corrective base/ binder course including loading of aggregate with F.E. loader , hot mixing of stone aggregates and bitumen in hot mix plant, transporting the mixed material by tippers to paver and laying the mixed material with paver finisher fitted with electronic sensing device to the required level and grade and rolling with road rollers, as per MORTH specification to achieve the desired density and compaction but excluding the cost of primer/ tack coat. 16.55.1 50mm / 75mm average compacted thickness with bitumen of 60/70 grade @ 3.5% (Percentage by weight of total mix)
cum
4,242.20
16.56
Providing and laying Dense Bituminous concrete on prepared surface with specified graded stone aggregate for wearing course including loading of aggregate with F.E. loader , and hot mixing of bitumen with filler and stone aggregate in hot mix plant , transporting the mixed material by tippers to paver and laying the mixed material with mechanical paver finisher fitted with electronic sensing device to the required level and grade and rolling with road rollers, as per MORTH
248
Code No
Description
Unit
Rate Rs.
specification, to achieve the desired density and compaction but excluding cost of primer/ tack coat. 16.56.1 40 mm/50mm compacted thickness with bitumen of grade 60/ 70 @ 5.5% and lime @3% (percentage by weight of total mix).
cum
5,856.05
16.57
Providing and laying Dense Bituminous Concrete on prepared surface with specified graded stone aggregate for wearing course including loading of aggregate with F.E. loader, and hot mixing of bitumen with filler and stone aggregate in hot mix plant, transporting the mixed material by tippers to paver and laying the mixed material with mechanical paver finisher fitted with electronic sensing device to the required level and grade and rolling with road rollers, as per MORTH specifications, to achieve the desired density and compaction but excluding cost of primer/ tack coat. 16.57.1 40 mm/50mm compacted thickness with bitumen of grade CRMB - 60 @ 5.5% and lime @3% (percentage by weight of total mix).
cum
6,323.40
16.58
Providing and laying Dense Bituminous Concrete on prepared surface with specified graded stone aggregate for wearing course including loading of aggregate with F.E. loader, and hot mixing of bitumen with filler and stone aggregate in hot mix plant, transporting the mixed material by tippers to paver and laying the mixed material with mechanical paver finisher fitted with electronic sensing device to the required level and grade and rolling with road rollers, as per MORTH specifications, to achieve the desired density and compaction but excluding cost of primer/ tack coat. 16.58.1 40 mm/50mm compacted thickness with bitumen of grade PMB - 40 @ 5.5% and lime @3% (percentage by weight of total mix).
cum
6,881.20
16.59
Manufacturing supplying and fixing retro reflective sign boards made up of 2mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of
249
Code No
Description
Unit
Rate Rs.
aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer--incharge. 16.59.1 16.59.2 16.60 Mandatory/ Regulatory sign boards of 900mm dia - metre with part as length of 3750mm. Cautionary /warning sign boards of equilateral triangular shape having each side of 900mm with support length of 3650mm. sqm sqm 3,776.45 2,616.55
Manufacturing supplying and fixing retro reflective overhead signage boards made up of 2mm thick aluminium sheet face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge letters, borders etc. as per IRC : 672001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). 16.60.1 Overhead informatory road signage. sqm 4,017.75
16.61
Providing Retro-reflective regulatory sign board of size 900mm dia meter made out of 2mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4mm The boards will be fixed to 1 No. 50x50mm square post made of M.S. angle 50x50x4m, 4m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per direction of Engineer-in-charge. Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour ,T&P, cleaning the road surface of all dirt, seals, oil,
sqm
4,117.10
16.62
sqm
497.30
250
Code No
Description
Unit
Rate Rs.
grease and foreign material etc. complete as per direction of Engineer-incharge and accordance with applicable specifications. 16.63 Providing and laying and making kerb channel 30cm wide and 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth etc. complete and as per direction of Engineer-in-charge. Providing and laying 75mm thick compacted bed of dry brick aggregate of 40mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand including finishing smooth etc. complete as per direction of Engineer-in-charge. Providing and fixing post delineators made of ABS round body fitted with 2 nos 100mm dia high reflective, reflectors and mounted on MS pipe of 65mm dia duly powder coated anti-rust and anti theft steel to be installed as per direction of Engineer-in-charge. Excavating holes upto 0.10 cum including getting out the excavated soil. then returning the soil as deported in layers not exceeding 20cm in depth including consolidating and deposited layer by ramming watering etc. Disposing of surplus excavated soil as directed with in a lead of 50mm and lift upto 1.5 m. 16.66.1 16.67 All kind of soil. each 10.85
metre
198.80
16.64
sqm
63.15
16.65
each
786.35
16.66
Providing and fixing at or near ground level factory made RCC pavement slab of M-30 grade of size 450x450x50mm (HPL or equivalent ) including reinforcement with 6mm dia M.S. bars 4 nos on each side including setting in position in footpath to the required level and line over a bed of 20mm average thick cement mortar (1 cement : 3 coarse sand ) having thickness not more than 5mm except on curve including filling of joints with same cement mortar and making grooves etc. complete as per direction of Engineer-in-charge. Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction and of approved size and design/ shape laid in required colour and pattern over and including 50mm thick compacted bed of course sand, filling the joints with coarse sand etc. all complete as per the direction of Engineer-in-charge. Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50mm including strengthening with 2mm dia wire or nuts,
sqm
345.35
16.68
sqm
346.35
16.69
cum
4,247.70
16.70
251
Code No
Description
Unit
Rate Rs.
bolts and washers as required complete as per the direction of Engineerin-charge. 16.70.1 16.70.2 16.71 Made of G.I. wire of dia 4mm. Made of G.I. wire of dia. 4mm, PVC coated to achieve outer dia. not less than 5mm in required colour and shade. sqm sqm 373.45 403.95
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia. 3mm including strengthening with 2mm dia. wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Supplying and stacking of hard stone (for stone pitching) 22.5 cm thick at site. Dry stone pitching 22.5cm thick laid in courses and required profile with hammer dressed stones having no side less than 15 cm, with minimum depth of 20cm including preparing the bedding surface etc. all complete.(Payment for Stone to be made separately) 75 mm thick back filling for pitching including supplying of required materials and consolidation etc. complete with :
sqm cum
464.95 458.35
16.72 16.73
sqm
96.60
16.74
16.74.1 Moorum. 16.74.2 Stone aggregate 20 mm nominal size. 16.74.3 Stone aggregate 40 mm nominal size.
16.75 Providing and laying C.C. pavement of mix M25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately). Deduct for using of M 20 grade concrete instead of M-25 grade concrete in C.C. pavement. Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material within all lifts and lead upto 1000 metre (by mechanical means).
sqm sqm sqm
34.45 69.05 65.10
cum cum
4,471.25 147.30
16.76 16.77
sqm
2.60
252
SUB HEAD : 17.0
SANITARY INSTALLATIONS
253
BASIC RATES (17.0 SANITARY INSTALLATIONS)

Code No 0100 0101 0103 0112 0114 0115 0116 0117 0123 0124 0128 0131 0295 0297 0367 0586 0588 0828 0830 0834 0982 1007 1309 1315 1330 1331 1332 1334 1335 1350 1363 1369 1373 Description Unit Rate Rs. 138.45 138.45 141.60 141.60 135.25 135.25 151.50 141.60 151.50 141.60 138.45 141.60 700.00 700.00 4,500.00 150.00 83.00 52.00 115.00 120.00 600.00 3,100.00 48.00 22.00 28.00 13.00 11.00 20.00 25.00 23.00 79.00 10.00 9.00
Bandhani Bhisti Blacksmith 2nd class Carpenter 2nd class Beldar Coolie Fitter (grade 1) Assistant Fitter or 2nd class Fitter Mason (brick layer) 1st class Mason (brick layer) 2nd class Mate Painter Stone Aggregate (Single size) : 20 mm nominal size Stone Aggregate (Single size) : 10 mm nominal size Portland Cement Chromium plated Brass screws 40 mm Chromium plated Brass screws 25 mm Anticorrosive bituminous paint (black) Enamel paint Synthetic enamel paint in all shades except black or chocolate shade Coarse sand (zone III) Structurals such as tees,angles channels and R.S. joists C.I. bracket for wash basin and sinks C.P.brass chain with 40 mm dia rubber plug Clamps and M.S. stays including bolts and nuts for 100 mm pipe M.S.Holder bat clamp of approved design for 100 mm S.C.I. pipe M.S.Holder bat clamp of approved design for75 mm S.C.I. pipe Clamps and M.S. stays including bolts and nuts for 50 mm pipe Clamps and M.S. stays including bolts and nuts for 75 mm pipe Mosquito proof coupling of approved design Vitreous china foot rests 250x130x30 mm S.C.I. gully or nahani grating 100 mm dia Rubber insertions for80 mm dia pipe joints
Day Day Day Day Day Day Day Day Day Day Day Day cum cum tonne Nos Nos litre litre litre cum quintal pair each each each each each each each pair each each
SUB HEAD 17.0 SANITARY INSTALLATIONS
255
Code No 1374 1392 1396 1397 1532 1533 1534 1535 1540 1541 1542 1543 1614 1616 1617 1620 1621 1624 1625 1627 1628 1630 1631 1633 1634 1636 1637 1639 1640
Description Rubber insertions for 100 mm dia pipe joints Mirror of superior make glass 60x45 cm Vitrous china pedestal for wash basin Pig lead Flush pipe with union spreaders and clamps all in C.P. brass for single stall Flush pipe with union spreaders and clamps all in C.P. brass for double stall Flush pipe with union spreaders and clamps all in C.P. brass for range of three stall Flush pipe with union spreaders and clamps all in C.P. brass for range of four stall Flush pipe and spreaders G.I.for single set of one squatting plate urinal Flush pipe and spreaders G.I.for range of two squatting plates urinal Flush pipe and spreaders G.I.for range of three squatting plates urinal Flush pipe and spreaders G.I.for range of four squatting plates urinal G.I. inlet connection S.C.I. soil, waste and vent single socketed pipe1.80 metres long:75mm dia S.C.I. soil, waste and vent single socketed pipe1.80 metres long: 100mm dia S.C.I. plain bend75mm dia S.C.I. plain bend 100mm dia S.C.I. bend with access door 75mm dia S.C.I. bend with access door 100mm dia S.C.I. plain single equal junctions75x75x75 mm dia S.C.I. plain single equal junctions100x100x100 mm dia S.C.I. single equal junctions75x75x75 mm dia with access door. S.C.I. single equal junctions 100x100x100 mm dia with access door. S.C.I. plain double equal junctions 75x75x75x75 mm dia S.C.I. plain double equal junctions100x100x100x100 mm dia S.C.I. double equal junctions75x75x75x75 mm dia with access door. S.C.I. double equal junctions 100x100x100x100 mm dia with access door. Slotted cowl (terminal guard )75 mm dia Slotted cowl (terminal guard ) 100 mm dia
Unit each each each kilogram each each each each each each each each each each each each each each each each each each each each each each each each each
Rate Rs. 12.00 249.00 527.00 58.00 204.00 333.00 415.00 465.00 138.00 203.00 255.00 320.00 50.00 537.00 610.00 140.00 178.00 161.00 194.00 205.00 265.00 224.00 297.00 296.00 394.00 333.00 417.00 109.00 152.00
256
Code No 1653 1656 1659 1662 1666 1667 1669 1670 1672 1673 1674 1677 1682 1683 1685 1686 1863 1871 1872 1875 1876 1881 1885 1889 1891 1893 1895
Description Sand cast iron S&S plain single unequal junctions : 100x100x75 mm dia Sand cast iron S&S single unequal junctions: 100x100x75 mm dia with access door. Sand cast iron S&S plain double unequal junctions : 100x100x75x75 mm dia Sand cast iron S&S double unequal junctions: 100x100x75x75 mm dia with access door. Sand cast iron heel rest bend75mm dia Sand cast iron heel rest bend 100mm dia S.C.I. single equal invert branch of required degree75x75x75 mm dia S.C.I. single equal invert branch of required degree 100x100x100 mm dia S.C.I. double equal invert branch of required degree 75x75x75x75 mm dia S.C.I. double equal invert branch of required degree 100x100x100x100 mm dia S.C.I. single unequal invert branch of required degree100x100x75 mm dia S.C.I. double unequal invert branch of required degree 100x100x75x75 mm dia S.C.I. door pieces 75 mm dia S.C.I. door pieces 100 mm dia S.C.I. collar 75 mm dia S.C.I. collar 100 mm dia Fire clay kitchen sink: 600x450x250 mm White vitreous china laboratry sink450x300x150 mm White vitreous china laboratry sink600x450x200 mm White plastic seat (solid)with lid C.P.brass hinges and rubber buffers Black plastic seat (solid) with lid C.P.brass hinges and rubber buffers Spun yarn 15 mm C.P.brass tap C.P.brass toilet paper holder of standard size C.I. trap for standard urinal with vent arm with operating and other couplings in C.P.brass: 50 mm dia C.I. trap for standard urinal with vent arm with operating and other couplings in C.P.brass: 80 mm dia C.P.brass trap40 mm dia
Unit each each each each each each each each each each each each each each each each each each each each each kilogram each each each each each
Rate Rs. 288.00 321.00 423.00 453.00 165.00 197.00 239.00 321.00 314.00 422.00 382.00 458.00 211.00 291.00 82.00 110.00 1,192.00 664.00 1,400.00 275.00 250.00 30.00 103.00 70.00 125.00 158.00 99.00
257
Code No 1896 1897 1898 1913 1915 1947 1949 1950 1951 1952 1953 1954 1955 1965
Description 100 mm S.C.I. trap with vent heel 100 mm S.C.I. trap with 100 mm inlet and 100 mm outlet 100 mm S.C.I. trap with 100 mm inlet and75 mm outlet Vitros china lipped front urinal Vitros china squatting plate urinal Vitreous china flat back wash basin 630x450 mm Vitreous china angle back wash basin 600x480 mm Vitreous china angle back wash basin 400x400 mm C.P. brass waste 32 mm C.P. brass waste 40 mm Vitreous china indian type w.c. pan size 580 mm Vitreous china orrisa type w.c. pan size 580 mm Vitreous china pedestal type water closet White vitreous china dual purpose closet (Anglo Indian W.C.) suitable for use as sequatting pan or European type water closet as per manufacturer's specifications Vitreous china foot rests 250x125x25 mm Carriage of Stone aggregate below 40 mm nominal size Carriage of Coarse sand Carriage of Steel Carriage of Cement Vitreous china Surgeon type wash basin of size 660x460 mm 600x120 mm glass shelf with anodised aluminium angle frame, C.P. brass brackets and guard rail of standard size Vitreous china flat back wash basin 550x400 mm
Unit each each each each each each each each each each each each each each
Rate Rs. 260.00 221.00 164.00 380.00 610.00 585.00 540.00 347.00 48.00 53.00 290.00 700.00 554.00 796.00
1970 2202 2203 2205 2209 3213 3228 3229 3617 3620 3621 3624 3625 3628 3629 3634 3635
pair cum cum tonne tonne each each each
80.00 53.21 53.21 47.29 47.29 810.00 95.00 450.00
C.C.I.(spun) socketed soil, waste and vent pipe 1.80 metres long:100mm dia C.C.I.(spun) socketed soil, waste and vent pipe 1.80 metres long:75mm dia S.C.I. S&S bends with access door100mm dia S.C.I. S&S bends with access door75mm dia S.C.I. S&S bend100mm dia S.C.I. S&S bend75mm dia S.C.I. S&S heel rest sanitary bend 100mm dia S.C.I. S&S heel rest sanitary bend 75mm dia
each each each each each each each each
978.00 846.00 225.00 179.00 190.00 143.00 233.00 204.00
258
Code No 3640 3641 3644 3645 3650 3651 3654 3655 3660 3664 3670 3674 3681 3682 3685 3686 3690 3695 3699 3707 3708 3712 3713 3716 3717 3728 3729 3733
Description S.C.I. S&S single equal junctions100x100x100 mm S.C.I. S&S single equal junctions75x75x75 mm S.C.I. S&S single equal junctions with access door 100x100x100 mm S.C.I. S&S single equal junctionswith access door 75x75x75 mm S.C.I. S&S double equal junctions100x100x100x100 mm S.C.I. S&S double equal junctions75x75x75x75 mm S.C.I. S&S double equal junctions with access door 100x100x100x100 mm. S.C.I. S&S double equal junctions with access door 75x75x75x75 mm. S.C.I. S&S single unequal junctions100x100x75 mm S.C.I. S&S single unequal junctions with access door 100x100x75 mm S.C.I. S&S double unequal junctions100x100x75x75 mm S.C.I. S&S double unequal junctionswith access door 100x100x75x75 mm S.C.I. S&S single equal invert branch of required degree 100x100x100 mm dia S.C.I. S&S single equal invert branch of required degree 75x75x75 mm dia S.C.I. S&S double equal invert branch of required degree100x100x100x100 mm dia S.C.I. S&S double equal invert branch of required degree 75x75x75x75 mm dia S.C.I. S&S single unequal invert branch of required degree100x100x75 mm dia S.C.I. S&S double unequal invert branch of required degree100x100x75x75 mm dia S.C.I. S&S, 75 mm offset for75 mm dia pipe S.C.I. S&S, 150 mm offset for75 mm dia pipe S.C.I. S&S, 150 mm offset for100 mm dia pipe S.C.I. S&S, 114 mm offset for75 mm dia pipe S.C.I. S&S, 114 mm offset for100 mm dia pipe S.C.I. S&S, 152 mm offset for75 mm dia pipe S.C.I. S&S, 152 mm offset for100 mm dia pipe SCI S&S door pieces 100 mm dia SCI S&S door pieces 75 mm dia SCI S&S, Slotted Cowl (Terminal Guard) 100 mm
Unit each each each each each each each each each each each each each each each each each each each each each each each each each each each each
Rate Rs. 367.00 276.00 396.00 294.00 467.00 373.00 502.00 400.00 461.00 523.00 639.00 700.00 325.00 247.00 414.00 334.00 422.00 574.00 179.00 223.00 306.00 220.00 289.00 275.00 361.00 230.00 176.00 154.00
259
Code No 3734 3738 3739 3746 3747 3749 4202 7004 7005 7006 7048 7095 7096 7097 7098 7101 7102 7103 7104 7105 7106 7107 7112 7113 7114 7115 7116 7117 7118
Description SCI S&S, Slotted Cowl (Terminal Guard) 75 mm SCI S&S, collars 100 mm SCI S&S, collars 75 mm S.C.I. S&S, 76 mm offset for75 mm dia pipe S.C.I. S&S, 76 mm offset for100 mm dia pipe Vitreous china toilet paper holder of standard size Red oxide Zinc chromate primer Vitreous china flat back wash basin 450x300 mm Vitreous china 10 litres low level cistern without fittings Vitreous china 10 litres low level cistern with fittings Rawl plug 50 mm (designation 10 no.) Stainless steel kitchen sink - with drain board bowl depth 250 mm. Stainlees steel kitchen sink - with drain board 510 x 1040mm bowl depth 225 mm. Stainlees steel kitchen sink - with drain board 510 x 1040mm bowl depth 200 mm. Stainless steel kitchen sink - with drain board 510x1040mm bowl depth 178 mm Stainless steel kitchen sink - without drain board 610x510mm bowl depth 200 mm Stainless steel kitchen sink - without drain board 610x460mm bowl depth 200 mm. Stainless steel kitchen sink - without drain board 470x420mm bowl depth 178 mm Coloured Orissa pattern W.C. pan 580x440 mm Coloured Pedestal type W.C. pan 580x440 mm (European type) Coloured Vitreous china 10 lit. low level cistern Coloured (other than black) solid P.V.C. seat in European W.C. pan Circular shape 450 mm dia Mirror with Plastic moulded frame Rectangular shape 453x357 mm Mirror with Plastic moulded frame Ovel shape 450x350 mm (outer dimensions) Mirror with Plastic moulded frame Rectangular shape 1500x450 mm Mirror with Plastic moulded frame Hard board 6 mm thick Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings Semi Rigid PVC waste pipe for sink and wash basin 40 mm dia with
Unit each each each each each each litre each each each each each each each each each each each each each each each each each each each sqm each each
Rate Rs. 142.00 161.00 115.00 126.00 220.00 89.00 58.00 360.00 824.00 1,390.00 7.00 4,900.00 4,600.00 4,100.00 2,600.00 2,700.00 2,500.00 1,600.00 1,043.00 865.00 1,268.00 380.00 370.00 245.00 280.00 635.00 151.00 16.00 21.00
260
Code No
Description length not less than 700 mm i/c PVC waste fittings
Unit
Rate Rs.
7119 7120 7123 7126 7127 7358 7359 7361 7363 7364 7375 7376 7377 7378 7379 7491 7492 7493 7494 7503 7504 7505 7506 7507 7508 7805
Flexible (coil shaped) PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings Flexible (coil shaped) PVC waste pipe for sink and wash basin 40 mm dia with length not less than 700 mm i/c PVC waste fittings Coloured High density polythylene/ poly propylene 10 lit. (full flush) capacity controlled low level flushing cistern with fittings White Vitreous china 10 lit. (full flush) capacity controlled low level flushing cistern with all fittings Coloured Vitreous china 10 lit. (full flush) capacity controlled low level flushing cistern with all fittings Flushing Cistern P.V.C. 10 lts capacity ( low level ) (White) ( with fittings, accessories and flush pipe) P.V.C. automatic flushing cistern 5 lts capacity P.V.C. automatic flushing cistern 10 lts capacity 15 mm C.P. brass tap with elbow operation lever White glazed fire clay draining board 600x450x25 mm G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Single lipped urinal G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Range of two lipped urinals G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Range of three lipped urinals G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Range of four lipped urinals White vitreous china clay half stall urinal flat back 580x380x350 mm or angle back 450x375x350 mm with waste fittings as per IS : 2556 Prefix PTMT - Waste Coupling 31/32MM Prefix PTMT - Waste Coupling 38/40MM Prefix PTMT - Bottle Trap 31/32MM Prefix PTMT - Bottle Trap 38/40MM Prefix PTMT - Liquid Soap Container of 400ml capacity Prefix PTMT - Towel Ring 215xd200x37mm Prefix PTMT - Towel Rail (450MM) Prefix PTMT - Towel Rail (600MM) Prefix PTMT - Shelf 450x124x36mm Prefix PTMT - Urinal Spreader 15MM Salem Stainless steel AISI - 304 (18/8) Orrisa pattern W.C. pan
each each each each each each each each each each each each each each each Each Each Each Each Each Each Each Each Each Each each
20.00 22.00 632.00 858.00 1,277.00 570.00 430.00 465.00 396.00 390.00 352.00 880.00 1,070.00 1,530.00 1,224.00 45.00 66.00 295.00 320.00 135.00 108.00 180.00 210.00 245.00 120.00 3,350.00
261
Code No
Description 724mm X 578mm
Unit
Rate Rs.
7806 7807 7808 7809 7858 9999
Salem Stainless steel AISI - 304 (18/8) Round basin 405mm X 355mm Salem Stainless steel AISI - 304 (18/8) Wash basin 530mm X 345mm Centrifugally cast (spun) iron S&S 100 mm inlet and 100 mm outlet Centrifugally cast (spun) iron S&S 100 mm inlet and 75 mm outlet P.T.M.T. Urinal cock 15mm dia Sundries
each each each each each L.S.
1,500.00 1,350.00 309.00 334.00 90.00 1.00
262
17.0 SANITARY INSTALLATIONS

Code No
17.1
Description
Unit
Rate Rs.
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : 17.1.1 17.1.2 White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with flush pipe and integrated type foot rests. each 2,304.65
each
5,382.60
17.2
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : 17.2.1 17.2.2 W.C. pan with ISI marked white solid plastic seat and lid W.C. pan with ISI marked black solid plastic seat and lid each each 2,152.50 2,123.45
17.3
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.3.1 17.3.2 W.C. pan with ISI marked white solid plastic seat and lid. W.C. pan with ISI marked black solid plastic seat and lid. each each 3,282.95 3,253.95
17.4
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.4.1 17.4.2 17.4.3 17.4.4 One urinal basin with 5 litre white P.V.C. automatic flushing cistern. Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern. Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern. Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern. each each each each 2,018.70 3,393.60 4,491.60 6,062.20
17.5
Providing and fixing white vitreous china flat back half stall urinal of size
SUBHEAD -17.0 SANITARY INSTALLATIONS
263
Code No
Description
Unit
Rate Rs.
580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required : 17.5.1 17.5.2 17.5.3 17.5.4 17.6 Single half stall urinal with 5 litre P.V.C. automatic flushing cistern. Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern. Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern. Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern. each each each each 3,720.30 5,960.75 7,936.50 9,811.40
Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required : 17.6.1 17.6.2 17.6.3 17.6.4 Single squatting plate with 5 litre P.V.C. automatic flushing cistern. Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern. Range of three squatting plates with 10 litre P.V.C. automatic flushing cistern. Range of four squatting plates with 10 litre P.V.C. automatic flushing cistern. each each each each 2,392.55 3,548.10 4,732.40 5,789.45
17.7
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : 17.7.1 17.7.2 17.7.3 17.7.4 17.7.5 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Angle back wash basin size 600x480 mm with single 15 mm C.P. brass pillar tap. each each each each each 1,332.90 1,201.70 1,176.10 1,044.90 1,149.45
264
Code No
Description
Unit
Rate Rs.
17.7.6 17.7.7 17.7.8
White Vitreous China Angle back wash basin size 400x400 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap. White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated levers. White Vitreous China Surgeon type wash basin of size 660x460 mm with single 15 mm C.P. brass pillar taps with elbow operated levers ISI marked. Stainless Steel AISI-304(18/8) Round basin 405x355 mm with single 15 mm C.P. brass pillar tap. Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tap.
each each
925.25 940.35
each
2,274.85
17.7.9
each each each each
1,803.35 2,264.45 2,090.25 705.90
17.7.10 17.7.11 17.8 17.9
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required : 17.9.1 White glazed fire clay kitchen sink of size 600x450x250 mm.
each
1,793.35
17.10
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : 17.10.1 17.10.1.1 17.10.1.2 17.10.1.3 17.10.1.4 Kitchen sink with drain board 510x1040 mm bowl depth 250mm. 510x1040 mm bowl depth 225mm. 510x1040 mm bowl depth 200mm. 510x1040 mm bowl depth 178mm. each each each each 6,154.35 5,805.90 5,225.15 3,482.90
17.10.2
Kitchen sink without drain board 17.10.2.1 17.10.2.2 17.10.2.3 610x510 mm bowl depth 200 mm. 610x460 mm bowl depth 200 mm. 470x420 mm bowl depth 178 mm. each each each 3,439.20 3,206.90 2,161.55
17.11
Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of fittings and brackets, cutting and making good the wall wherever required :
265
Code No
Description
Unit
Rate Rs. 1,295.10 2,149.95
17.11.1 17.11.2 17.12
Size 450x300x150mm Size 600x450x200mm
each each
Providing and fixing draining board with C.I. brackets including painting of brackets, cutting and making good the walls wherever required : 17.12.1 White glazed fire 600x450x25mm clay draining board of size each 638.60
17.13
Providing and fixing white vitreous china water closet squatting pan (Indian type) 17.13.1 17.13.2 Long pattern W.C. pan of size 580 mm Orissa pattern W.C. pan of size 580x440 mm each each 534.60 1,010.85
17.14
Extra for using coloured W.C. pan instead of white W.C. pan 17.14.1 Orissa pattern W.C. pan 580x440 mm each each 398.40 841.25
17.15 17.16
Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. Extra for using coloured pedestal type W.C pan (European type) with low level cistern of same colour instead of white vitreous china W.C pan and cistern. Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet: 17.17.1 17.17.2 250x130x30 mm 250x125x25 mm
each
876.95
17.17
pair pair
111.70 112.85
17.18
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 17.18.1 17.18.2 10 litre capacity - White 10 litre capacity - coloured each each 709.75 783.85
17.19
Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. 17.19.1 17.19.2 10 litre (full flush) capacity-white 10 litre (full flush) capacity-coloured each each 1,178.80 1,665.45
17.20
Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : 17.20.1 17.20.2 White solid plastic seat with lid Black solid plastic seat with lid each each 334.95 305.90
17.21
Extra for providing coloured other than black solid P.V.C. plastic seat and cover in European type W.C. pan, instead of white plastic seat and cover. Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan.
each each
121.95 73.60
17.22
266
Code No
17.23
Description
Unit
Rate Rs.
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively. Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : 17.25.1 17.25.2 17.25.3 17.25.4 17.25.5 17.25.6 Flat back wash basin of size 630x450mm. Flat back wash basin of size 550x400mm. Angle back wash basin of size 600x480mm. Angle back wash basin of size 400x400mm. Flat back wash basin of size 450x300mm. Surgeon type wash basin of size 660x460mm.
each each
578.95 1,069.65
17.24 17.25
each each each each each each
753.00 596.20 700.75 476.55 491.65 1,014.35
17.26
Providing and fixing kitchen sink including making all connections excluding cost of fittings. 17.26.1 White glazed fire clay sink of size 600x450x250mm. each 1,444.00
17.27
Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings: 17.27.1 17.27.2 Size 450x300x150 mm. Size 600x450x200 mm. each each 830.75 1,685.60
17.28
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 17.28.1 17.28.1.1 17.28.1.2 17.28.2 17.28.2.1 17.28.2.2 Semi rigid pipe 32 mm dia 40 mm dia Flexible pipe 32 mm dia 40 mm dia each each each each 46.80 49.10 16.45 28.85 each each 42.15 47.95
17.29 17.30 17.31
Providing and fixing 100 mm sand cast Iron grating for gully trap. Providing and fixing in position 25mm diameter mosquito proof coupling of approved municipal design. Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 17.32.1 Circular shape 450mm dia.
each
493.65
17.32
each
599.15
267
Code No
Description
Unit
Rate Rs. 465.10 504.00 1,034.50
17.32.2 17.32.3 17.32.4 17.33
Rectangular shape 453x357mm Oval shape 450x350mm (outer dimensions) Rectangular shape 1500x450 mm
each each each
Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Providing and fixing toilet paper holder : 17.34.1 17.34.2 C.P. brass Vitreous china
each
218.80
17.34
each each
147.10 173.00
17.35
Providing and fixing soil, waste and vent pipes : 17.35.1 17.35.1.1 17.35.1.2 17.35.2 17.35.2.1 17.35.2.2 100 mm dia. Sand cast iron S&S pipe as per IS: 1729. Centrifugally cast (spun) iron socketed pipe as per IS: 3989. 75 mm diameter : Sand cast iron S&S pipe as per IS: 1729. Centrifugally cast (spun) iron socketed pipe as per IS: 3989. metre metre 395.45 629.85 metre metre 451.00 730.40
17.36
Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : 17.36.1 17.36.2 75 mm dia pipe 100 mm dia pipe each each 25.30 29.80
17.37
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. : 17.37.1 17.37.2 For 100 mm dia. Pipe For 75 mm dia. Pipe each each 65.35 63.00
17.38
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 17.38.1 17.38.1.1 17.38.1.2 17.38.2 17.38.2.1 17.38.2.2 100 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 75 mm dia Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS- 3989 each each 210.00 230.90 each each 255.00 291.00
17.39
Providing and fixing plain bend of required degree.
268
Code No
Description
Unit
Rate Rs.
17.39.1 17.39.1.1 17.39.1.2 17.39.2 17.39.2.1 17.39.2.2 17.40
100 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS : 3989 75 mm Sand cast iron S&S as per IS -1729 Sand cast iron S&S as per IS - 3989 each each 175.15 178.65 each each 222.45 236.40
Providing and fixing heel rest sanitary bend 17.40.1 17.40.1.1 17.40.1.2 17.40.2 17.40.2.1 17.40.2.2 100 mm dia Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 each each 204.20 249.50 each each 244.50 286.35
17.41
Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 17.41.1 17.41.1.1 17.41.1.2 17.41.2 17.41.2.1 17.41.2.2 100x100x100x100mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 75x75x75x75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 each each 409.75 487.60 each each 513.85 612.55
17.42
Providing and fixing double equal plain junction of required degree. 17.42.1 17.42.1.1 17.42.1.2 17.42.2 17.42.2.1 17.42.2.2 100x100x100x100 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 75x75x75x75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 each each 356.35 445.75 each each 473.35 558.15
17.43
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 17.43.1 17.43.1.1 17.43.1.2 100x100x100 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 each each 374.60 489.60
269
Code No
Description
Unit
Rate Rs.
17.43.2 17.43.2.1 17.43.2.2 17.44
75x75x75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 each each 283.15 364.45
Providing and fixing single equal plain junction of required degree : 17.44.1 17.44.1.1 17.44.1.2 17.44.2 17.44.2.1 17.44.2.2 100x100x100 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 75x75x75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 each each 250.65 333.10 each each 323.50 442.00
17.45
Providing and fixing double unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 17.45.1 17.45.1.1 17.45.1.2 100x100x75x75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 each each 555.80 842.70
17.46
Providing and fixing double unequal plain junction of required degree: 17.46.1 17.46.1.1 17.46.1.2 100x100x75x75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 each each 507.00 757.90
17.47
Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 17.47.1 17.47.1.1 17.47.1.2 100x100x75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 each each 402.50 637.10
17.48
Providing and fixing single unequal plain junction of required degree : 17.48.1 17.48.1.1 17.48.1.2 100x100x75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 each each 350.20 551.15
17.49
Providing and fixing double equal plain invert branch of required degree: 17.49.1 17.49.1.1 17.49.1.2 17.49.2 100x100x100x100 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS 3989 75x75x75x75 mm each each 505.85 496.55
270
Code No
Description
Unit
Rate Rs. 377.25 400.50
17.49.2.1 17.49.2.2 17.50
Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989
each each
Providing and fixing single equal plain invert branch of required degree: 17.50.1 17.50.1.1 17.50.1.2 17.50.2 17.50.2.1 17.50.2.2 100x100x100 mm Sand cast iron S&S as per iron 1729 Sand cast iron S&S as per IS - 3989 75x75x75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 each each 290.15 299.45 each each 388.55 393.20
17.51
Providing and fixing double unequal invert branch of required degree : 17.51.1 17.51.1.1 17.51.1.2 100x100x75x75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 each each 547.70 682.40
17.52
Providing and fixing single unequal plain invert branch of required degree : 17.52.1 17.52.1.1 17.52.1.2 100x100x75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 each each 459.40 505.85
17.53
Providing and fixing sand cast iron S&S off sets as per IS: 1729 17.53.1 17.53.1.1 17.53.1.2 17.53.2 17.53.2.1 17.53.2.2 17.53.3 17.53.3.1 17.53.3.2 76 mm off sets With 75 mm dia. pipe With 100 mm dia. pipe 114 mm off sets With 75 mm dia. pipe With 100 mm dia. Pipe 152 mm off sets With 75 mm dia. Pipe With 100 mm dia. Pipe each each 340.25 440.15 each each 271.25 351.40 each each 158.90 268.05
17.54
Providing and fixing sand cast iron S&S off sets as per IS: 3989. 17.54.1 17.54.1.1 17.54.2 17.54.2.1 17.54.2.2 75 mm off sets With 75 mm dia. pipe 150 mm off sets With 75 mm dia. pipe With 100 mm dia. Pipe each each 277.75 374.15 each 220.45
271
Code No
17.55
Description
Unit
Rate Rs.
Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete : 17.55.1 17.55.1.1 17.55.1.2 17.55.2 17.55.2.1 17.55.2.2 100 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 each each 268.05 227.40 each each 367.65 296.80
17.56
Providing and fixing terminal guard: 17.56.1 17.56.1.1 17.56.1.2 17.56.2 17.56.2.1 17.56.2.2 100 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 each each 139.15 177.45 each each 192.25 194.60
17.57
Providing and fixing collar: 17.57.1 17.57.1.1 17.57.1.2 17.57.2 17.57.2.1 17.57.2.2 100 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS - 3989 75 mm Sand cast iron S&S as per IS - 1729 Sand cast iron S&S as per IS- 3989 each each 107.80 146.10 each each 143.45 202.70
17.58
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter: 17.58.1 17.58.2 17.58.3 100 mm 75 mm 50 mm for sand cast each each each 48.25 41.55 34.25 each each each 126.50 107.80 86.60
17.59
Providing and fixing M.S. stays and clamps iron/centrifugally cast (spun) iron pipes of diameter : 17.59.1 17.59.2 17.59.3 100 mm 75 mm 50 mm
17.60
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 17.60.1 100 mm inlet and 100 mm outlet
272
Code No
Description
Unit
Rate Rs. 544.30 442.10
17.60.1.1 17.60.1.2 17.60.2 17.60.2.1 17.60.2.2 17.61
Sand cast iron S&S as per IS: 3989. Sand Cast Iron S&S as per IS: 1729. 100 mm inlet and 75 mm outlet Sand cast iron S&S as per IS - 3989 Sand Cast Iron S&S as per IS- 1729.
each each
each each
573.35 375.90
Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size ) including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) : 17.61.1 17.61.2 17.61.3 100 mm dia. 75 mm dia. 50 mm dia. metre metre metre 152.45 108.85 68.40
17.62
Painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint over a coat of zinc chromate yellow primer (of approved quality ) on the outside surface of the cistern flush pipe, other fittings, etc. complete for new work. Re-painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint on the outside surface of the cistern, flush pipe, other fittings, etc. complete including polishing of wooden seat and lid and cleaning of W.C. pan with acid wherever necessary. Repainting C.I. cistern with synthetic enamel paint of approved colour brand and manufacture on the outside surface of cistern flush pipe, other fittings etc. complete. Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work : 17.65.1 17.65.2 100 mm diameter pipe 75 mm diameter pipe
each
215.15
17.63
each
148.55
17.64
each
65.75
17.65
metre metre
18.60 14.25
17.66
Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with paint of any colour such as chocolate, grey or buff etc : 17.66.1 17.66.2 100 mm diameter pipe 75 mm diameter pipe metre metre each 9.30 7.00 208.45
17.67 17.68
Repainting bath tub of size 1700x730x430mm with enamel paint. Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat lid with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40mm flush bend 20mm over flow pipe with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings
273
Code No
Description
Unit
Rate Rs.
and brackets, cutting and making good the walls and floors wherever required : 17.68.1 White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend.
each
4,142.20
17.69
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. 17.69.1 17.69.2 Waste coupling 31mm of 79mm length and 62mm breadth weighing not less than 45gms. Waste coupling 38mm of 83mm length and 77mm breadth, weighing not less than 60gms. each each 75.80 100.20
17.70
Providing and fixing PTMT Bottle Trap for Wash basin and sink. 17.70.1 Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms. Bottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 263gms.
each
366.20
17.70.2
each
395.25
17.71
Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. weighing not less than 105 gms. Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour. Weighing not less than 88 gms. Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 17.73.1 450MM long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gms. 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms.
each
164.65
17.72
each
149.00
17.73
each
294.65
17.73.2
each
329.50
17.74
Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour. Weighing not less than 300 gms. Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes. Weighing not less than 60 gms. Providing and fixing PTMT urinal cock of approved quality and colour.
each each
370.15 147.25
17.75 17.76
274
Code No
Description
Unit
Rate Rs.
17.76.1
15 mm nominal bore, 80mm long. 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms.
each
113.90
17.77
Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5mm flat of specified shape, projecting 75mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30mm x1.6mm galvanised M.S. flats of specified shape and of total length 420mm and shall be fixed with M.S. nuts, bolts, & washers of size 25x6mm, one bolts on each side of the pipe. 17.77.1 17.77.2 17.77.3 Total bracket length 580mm of approved shape and design (for single 100mm dia pipe). Total bracket length 810mm of approved shape and design (for two 100mm dia pipes). Total bracket length 1040mm of approved shape and design (for three 100mm dia pipes). each each each 121.70 148.05 174.35
275
SUB HEAD : 18.0
WATER SUPPLY
277
BASIC RATES (SH: 18.0 WATER SUPPLY)

Code No 0010 0114 0115 0116 0117 0123 0124 0761 0771 1301 1304 1305 1307 1339 1340 1342 1343 1360 1361 1362 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1397 Description Unit Rate Rs. 500.00 135.25 135.25 151.50 141.60 151.50 141.60 265.00 19.00 1,550.00 72.00 140.00 185.00 157.00 193.00 157.00 193.00 80.00 114.00 156.00 9.00 12.00 13.00 15.00 20.00 30.00 38.00 45.00 66.00 83.00 106.00 118.00 58.00
Hire charges of Derrickmonkey rope Beldar Coolie Fitter (grade 1) Assistant Fitter or 2nd class Fitter Mason (brick layer) 1st class Mason (brick layer) 2nd class Fuel wood Kerosene oil Bleaching powder Surface box for stop cock Surface box for sluice valve Surface box for water meter Brass bib-cock 15 mm dia Brass bib-cock 20 mm dia Brass stop-cock 15 mm dia Brass stop-cock 20 mm dia C.I.mouth, brass ferrule 15 mm dia C.I.mouth, brass ferrule 20 mm dia C.I.mouth, brass ferrule 25 mm dia Rubber insertions for80 mm dia pipe joints Rubber insertions for 100 mm dia pipe joints Rubber insertions for 125 mm dia pipe joints Rubber insertions for 150 mm dia pipe joints Rubber insertions for 200 mm dia pipe joints Rubber insertions for 250 mm dia pipe joints Rubber insertions for 300 mm dia pipe joints Rubber insertions for 350 mm dia pipe joints Rubber insertions for 400 mm dia pipe joints Rubber insertions for 450 mm dia pipe joints Rubber insertions for 500 mm dia pipe joints Rubber insertions for 600 mm dia pipe joints Pig lead
Day Day Day Day Day Day Day quintal litre quintal each each each each each each each each each each each each each each each each each each each each each each kilogram
SUB HEAD 18.0 WATER SUPPLY
279
Code No 1464 1466 1468 1470 1472 1545 1546 1547 1548 1549 1550 1551 1552 1555 1559 1608 1612 1641 1642 1643 1644 1645 1646 1647 1648 1649 1687 1688 1689 1690 1693
Description S & S.C.I.standard specials upto 300 mm dia (heavy class) S & S.C.I.standard specials over 300 mm dia (heavy class) Flanged C.I. standard specials upto 300 mm dia(heavy class) Flanged C.I. standard specials over 300 mm dia(heavy class) Casing pipe 100 mm dia G.I. pipes 15 mm dia G.I. pipes 20 mm dia G.I. pipes 25 mm dia G.I. pipes 32 mm dia G.I. pipes 40 mm dia G.I. pipes 50 mm dia G.I. pipes 65 mm dia G.I. pipes 80 mm dia G.I. back (jam) nuts25 mm dia G.I. back (jam) nuts65 mm dia G.I. tees (equal) 25 mm G.I. tees (equal) 65 mm G.I. Union 15 mm nominal bore G.I. Union 20 mm nominal bore G.I. Union 25 mm nominal bore G.I. Union 32 mm nominal bore G.I. Union 40 mm nominal bore G.I. Union 50 mm nominal bore G.I. Union 65 mm nominal bore G.I. Union 80mm nominal bore Polyethylene water storage tank with cover and suitable locking arrangement Unplasticised P.V.C.connection pipe with brass union 30 cm long 15 mm bore Unplasticised P.V.C.connection pipe with brass union 30 cm long 20 mm bore Unplasticised P.V.C.connection pipe with brass union 45 cm long 15 mm bore Unplasticised P.V.C.connection pipe with brass union 45 cm long 20 mm bore S.C.I. hand pump
Unit quintal quintal quintal quintal metre metre metre metre metre metre metre metre metre each each each each each each each each each each each each per litre each each each each each
Rate Rs. 2,400.00 2,595.00 4,320.00 4,772.00 292.00 58.00 77.00 109.00 140.00 160.00 211.00 269.00 355.00 5.00 15.00 38.00 215.00 32.00 50.00 59.00 73.00 108.00 158.00 324.00 392.00 4.00 18.00 25.00 25.00 35.00 450.00
280
Code No 1878 1879 1881 1882 1922 1923 1924 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1940 1941 1942 1943 1944 1945 1956 1957 1958 1959 1960 1961 1962 1963 1964
Description Shower rose C.P.brass for 15 to 20 mm inlet 100 mm dia Shower rose C.P.brass for 15 to 20 mm inlet 150 mm dia Spun yarn Strainer brass 40 mm dia 1.5 metre long H.P. or L.P. ball valve with polythene floats: 15 mm dia H.P. or L.P. ball valve with polythene floats: 20 mm dia H.P. or L.P. ball valve with polythene floats: 25 mm dia Brass full way valve with C.I. wheel (screwed end) 25 mm dia Brass full way valve with C.I. wheel (screwed end) 32 mm dia Brass full way valve with C.I. wheel (screwed end) 40 mm dia Brass full way valve with C.I. wheel (screwed end) 50 mm dia Brass full way valve with C.I. wheel (screwed end) 65 mm dia Brass full way valve with C.I. wheel (screwed end) 80 mm dia Gunmetal non-return valve-horizontal (screwed end) 25 mm dia Gunmetal non-return valve-horizontal (screwed end) 32 mm dia Gunmetal non-return valve-horizontal (screwed end) 40 mm dia Gunmetal non-return valve-horizontal (screwed end) 50 mm dia Gunmetal non-return valve-horizontal (screwed end) 65 mm dia Gunmetal non-return valve-horizontal (screwed end) 80 mm dia C.I.sluice valve (with caps) class I : 100 mm dia C.I.sluice valve (with caps) class I : 125 mm dia C.I.sluice valve (with caps) class I : 150 mm dia C.I.sluice valve (with caps) class I : 200 mm dia C.I.sluice valve (with caps) class I : 250 mm dia C.I.sluice valve (with caps) class I : 300 mm dia Bolts and nuts 16 mm dia 60 mm long Bolts and nuts 16 mm dia 65 mm long Bolts and nuts 20 mm dia 65 mm long Bolts and nuts 20 mm dia 70 mm long Bolts and nuts 20 mm dia 75 mm long Bolts and nuts 20 mm dia 80 mm long Bolts and nuts 24 mm dia 85 mm long Bolts and nuts 24 mm dia 90 mm long Bolts and nuts 27 mm dia 100 mm long
Unit each each kilogram each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each each
Rate Rs. 28.00 40.00 30.00 405.00 175.00 260.00 300.00 235.00 296.00 330.00 483.00 700.00 1,160.00 238.00 305.00 410.00 618.00 1,085.00 1,540.00 1,890.00 2,365.00 2,840.00 5,405.00 8,050.00 9,920.00 8.00 8.00 12.00 12.00 12.00 13.00 24.00 26.00 30.00
281
Code No 2271 2309 2319 2320 2321 2322 2323 2324 2325 2326 2327 2328 2329 2330 2331 2332 2333 2334 2341 2343 2344 2345 2346 2347 2348 2349 2350 2351 2352 2353 2355 2356 2357 3080
Description Carriage of G.I. pipes below 100 mm dia Carriage of Cast iron fittings Carriage of Spun iron S & S pipes 100 mm dia Carriage of Spun iron S & S pipes 125 mm dia Carriage of Spun iron S & S pipes 150 mm dia Carriage of Spun iron S & S pipes 200 mm dia Carriage of Spun iron S & S pipes 250 mm dia Carriage of Spun iron S & S pipes 300 mm dia Carriage of Spun iron S & S pipes 350 mm dia Carriage of Spun iron S & S pipes 400 mm dia Carriage of Spun iron S & S pipes 450 mm dia Carriage of Spun iron S & S pipes 500 mm dia Carriage of Spun iron S & S pipes 600mm dia Carriage of C.I. pipes 500 mm dia Carriage of R.C.C. pipes 900 mm dia Carriage of R.C.C. pipes 1000 mm dia Carriage of R.C.C. pipes 1100 mm dia Carriage of R.C.C. pipes 1200 mm dia Carriage of Pig lead Carriage of ductile iron pipes (k7) 100 mm dia Carriage of cast iron pipes 150 mm dia Carriage of cast iron pipes 200 mm dia Carriage of cast iron pipes 250 mm dia Carriage of cast iron pipes 300 mm dia Carriage of cast iron pipes 350 mm dia Carriage of cast iron pipes 400 mm dia Carriage of cast iron pipes 450 mm dia Carriage of cast iron pipes 500 mm dia Carriage of cast iron pipes 600 mm dia Carriage of cast iron pipes 700 mm dia Carriage of cast iron pipes 800 mm dia Carriage of cast iron pipes 900 mm dia Carriage of cast iron pipes 1000 mm dia Gunmetal non-return valve-horizontal (screwed end) 25 mm dia
Unit tonne tonne 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre tonne 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre each
Rate Rs. 47.29 47.29 116.30 155.35 193.83 315.30 448.05 553.80 775.32 1,057.26 1,292.20 1,292.20 1,938.30 1,292.20 2,907.45 3,876.61 3,876.61 3,876.61 47.29 116.30 193.83 315.30 448.05 553.80 775.32 1,057.26 1,292.20 1,292.20 1,938.30 1,938.30 1,938.30 2,907.45 3,876.61 260.00
282
Code No 3084 3088 3092 3096 3300 3311 3314 3317 3320 3321 3326 7257 7258 7259 7260 7261 7400 7401 7402 7403 7405 7406 7407 7408 7409 7410 7411 7412 7415 7416 7417 7418 7419 7420
Description Gunmetal non-return valve-horizontal (screwed end) 32 mm dia Gunmetal non-return valve-horizontal (screwed end) 40 mm dia Gunmetal non-return valve-horizontal (screwed end) 50 mm dia Gunmetal non-return valve-horizontal (screwed end) 65 mm dia Gunmetal non-return valve-horizontal (screwed end) 80 mm dia C.I.sluice valve (with caps) class II : 100 mm dia C.I.sluice valve (with caps) class II : 125 mm dia C.I.sluice valve (with caps) class II : 150 mm dia C.I.sluice valve (with caps) class II : 200 mm dia C.I.sluice valve (with caps) class II : 250 mm dia C.I.sluice valve (with caps) class II : 300 mm dia C.P. Brass bibcock 15 mm C.P. Brass long nose bibcock 15 mm C.P. Brass long body bibcock 15 mm C.P. Brass stop cock (concealed) 15 mm C.P. Brass angle valve 15 mm 15 mm PTMT bib cock 15 mm PTMT bib cockwith flange (fancy) 15 mm PTMT bib cock long body with flange 15 mm dia PTMT stop cock(male thread) 20 mm dia. PTMT stop cock PTMT pillar cock PTMT push cock 15 mm dia. PTMT push cock 12 mm dia. 20 mm BSP PTMT grating 100 mm dia. PTMT. Pillar cock (fancy) 15mm foam flow 125 mm grating withwaste hole Rectangular type with openable circular lid 150 mm size 18 mm high with 100 mm dia. (110 gm) Double acting air valve 50 mm Double acting air valve 80 mm Double acting air valve 100 mm Water meter (including testing charges) 80 mm Water meter (including testing charges) 100 mm Water meter (including testing charges) 150 mm
Unit each each each each each each each each each each each each each each each each each each each each each each each each each Each each each each each each each each each
Rate Rs. 385.00 505.00 712.00 1,245.00 2,038.00 1,950.00 2,465.00 3,000.00 5,800.00 8,200.00 10,250.00 258.00 220.00 258.00 258.00 288.00 96.00 220.00 135.00 96.00 120.00 150.00 90.00 75.00 30.00 220.00 36.00 90.00 3,050.00 4,480.00 5,800.00 1,800.00 2,800.00 4,000.00
283
Code No 7421 7422 7423 7424 7425 7495 7496 7497 7498 7499 7500 7501 7509 7651 7652 7653 7654 7655 7656 7657 7658 7659 7660 7661 7662 7663 7664 7665 7666 7668 7669
Description Water meter (including testing charges) 200 mm Dirt box srainer 80 mm Dirt box srainer 100 mm Dirt box srainer 150 mm Dirt box srainer 200 mm Prefix PTMT Ball Cock 15mm Complete with Epoxy Coated Aluminium Road & H.D. Ball Prefix PTMT Ball Cock 20mm Complete with Epoxy Coated Aluminium Road & H.D. Ball Prefix PTMT Ball Cock 25mm Complete with Epoxy Coated Aluminium Road & H.D. Ball Prefix PTMT Ball Cock 40mm Complete with Epoxy Coated Aluminium Road & H.D. Ball Prefix PTMT Ball Cock 50mm Complete with Epoxy Coated Aluminium Road & H.D. Ball Prefix PTMT Angle Stop cock with Flenge 15mm Prefix PTMT Swiveling shower 15mm Prefix PTMT Soap Dish/Holder 138x102x75mm Ductile Iron class K - 9 pipe Conforming to I.S. 8329 100mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 150mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 200mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 250mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 300mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 350mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 400mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 450mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 500mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 600mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 700mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 750mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 800mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 900mm dia Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 1000mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 100mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 150mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 200mm dia
Unit each each each each each Each Each Each Each Each Each Each Each Metre Metre Metre Metre Metre Metre Metre Metre Metre Metre Metre Metre Metre Metre Metre Each Each Each
Rate Rs. 4,500.00 2,500.00 3,750.00 4,850.00 6,800.00 121.00 175.00 396.00 745.00 1,120.00 120.00 81.00 108.00 658.00 978.00 1,348.00 1,743.00 2,238.00 2,625.00 3,763.00 4,175.00 5,600.00 6,275.00 8,538.00 9,725.00 10,000.00 11,663.00 13,125.00 25.00 35.00 62.00
284
Code No 7670 7671 7672 7673 7674 7675 7676 7677 7678 7679 7680 7681 7682 7683 7684 7685 7686 7687 7688 7689 7690 7691 7692 7693 7694 7695 7696 7697 7698 7699 7700 7701
Description Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 250mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 300mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 350mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 400mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 450mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 500mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 600mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 700mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 750mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 800mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 900mm dia Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 1000mm dia Ductile Iron K - 12 specials suitale for push on jointing upto 600mm dia Ductile Iron K - 12 specials suitale for push on jointing over 600mm dia Ductile Iron specials suitable for mechanical jointing as per I.S. 9523 upto 600mm dia Ductile Iron Specials suitable for mechancial jointing as per I.S. 9523 over 600mm dia Ductile Iron Pipe Class K-9 flanges and welding 100mm dia Ductile Iron Pipe Class K-9 flanges and welding 150 dia Ductile Iron Pipe Class K-9 flanges and welding 200mm dia Ductile Iron Pipe Class K-9 flanges and welding 250mm dia Ductile Iron Pipe Class K-9 flanges and welding 300mm dia Ductile Iron Pipe Class K-9 flanges and welding 350mm dia Ductile Iron Pipe Class K-9 flanges and welding 400mm dia Ductile Iron Pipe Class K-9 flanges and welding 450mm dia Ductile Iron Pipe Class K-9 flanges and welding 500mm dia Ductile Iron Pipe Class K-9 flanges and welding 600mm dia Ductile Iron Pipe Class K-9 flanges and welding 700mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 100mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 125mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 150mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 200mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 250mm dia
Unit Each Each Each Each Each Each Each Each Each Each Each Each Quintal Quintal Quintal Quintal Metre metre Metre Metre metre Metre Metre Metre Metre Metre Metre Metre metre metre Metre Metre
Rate Rs. 68.00 98.00 123.00 248.00 275.00 285.00 348.00 550.00 648.00 725.00 968.00 1,188.00 8,938.00 13,413.00 9,400.00 14,239.00 1,888.00 2,613.00 3,388.00 4,498.00 5,788.00 7,210.00 8,613.00 10,413.00 12,625.00 17,125.00 21,125.00 624.00 763.00 901.00 1,252.00 1,779.00
285
Code No 7702 7703 7704 7705 7706 7707 7708 7709 7710 7711 7712 7713 7714 7715 7716 7717 7718 7719 7720 7721 7722 7723 7724 7725 7726
Description S&S Centrifugally (Spun) C.I. Pipe class LA 300mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 350mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 400mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 450mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 500mm dia S&S Centrifugally (Spun) C.I. Pipe class LA 600mm dia S&S Centrifugally (Spun) C.I. Pipe Specials as per IS 1538 suitable for lead jointing upto 300mm dia S&S Centrifugally (Spun) C.I. Pipe Specials as per IS 1538 suitable for lead jointing over 300mm dia S&S Centrifugally (Spun) C.I. Pipe specials suitable for mechanical joint as per I.S. 13382 upto 300mm dia S&S Centrifugally (Spun) C.I. Pipe Specials suitabe for mechanical joint as per IS 13382 over 300mm dia Screwed double flanged centrigually cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 100mm dia Screwed double flanged centrigually cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 150mm dia Screwed double flanged centrigually cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 200mm dia Screwed double flanged centrigually cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 250mm dia Screwed double flanged centrigually cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 300mm dia Screwed double flanged centrigually cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 350mm dia Screwed double flanged centrigually cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 400mm dia Screwed double flanged centrigually cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 450mm dia Screwed double flanged centrigually cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 500mm dia Screwed double flanged centrigually cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 600mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 100mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 150mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 200mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 250mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 300mm dia
Unit Metre metre Metre Metre Metre Metre Quintal Quintal Quintal Quintal Metre Metre Metre Metre Metre Metre metre Metre metre Metre Metre Metre Metre Metre Metre
Rate Rs. 2,366.00 2,918.00 3,574.00 4,276.00 5,211.00 6,884.00 3,530.00 3,988.00 5,338.00 5,580.00 977.00 1,511.00 2,092.00 2,800.00 3,559.00 4,553.00 5,885.00 7,627.00 9,962.00 12,992.00 597.00 870.00 1,237.00 1,675.00 2,369.00
286
Code No 7727 7728 7729 7730 7731 7732 7733 7734 7735 7859 7861 7862 7863 7864 7865 7866 8300 8301 8302 8303 8304 8305 8625 8626 8627 8628 8629 8630 8631
Description Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 350mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 400mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 450mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 500mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 600mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 700mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 800mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 900mm dia Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 1000mm dia P.T.M.T. Bib cock with nozzle 15mm P.T.M.T. Stop cock (concealed) 15mm 15 mm nominal bore and 30 cm length PVC connection pipe with P.T.M.T. Nuts 15 mm nominal bore and 45 cm length PVC connection pipe with P.T.M.T. Nuts P.T.M.T. extension nipple 15mm P.T.M.T. extension nipple 20mm P.T.M.T. extension nipple 25mm 1216 mm PE-AL-PE Composit pressure pipe 1620 mm PE-AL-PE Composit pressure pipe 2025 mm PE-AL-PE Composit pressure pipe 2532 mm PE-AL-PE Composit pressure pipe 3240 mm PE-AL-PE Composit pressure pipe 4050 mm PE-AL-PE Composit pressure pipe Poly propylene- Random - Co - Polymer (PPR) pipes SDR 7.4 - 16 Outer dia Poly propylene - Random - Co - Polymer (PPR) pipes SDR 7.4 20mm Outer dia. Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 - 25 mm outer dia. Poly propylene - Random - Co - poymer (PPR) pipes SDR 7.4 - 32 mm Outer dia. Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 40mm Outer dia. Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 50mm Outer dia. Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 -
Unit Metre Metre Metre Metre metre Metre Metre metre metre each each each each each each each Metre Metre Metre Metre Metre Metre metre metre metre metre metre metre metre
Rate Rs. 2,728.00 3,256.00 3,861.00 4,557.00 6,011.00 7,463.00 10,405.00 12,798.00 15,505.00 110.00 160.00 27.00 32.00 30.00 36.00 54.00 79.00 97.00 126.00 172.00 227.00 304.00 29.00 44.00 68.00 111.00 176.00 257.00 400.00
287
Code No
Description 63mm Outer dia.
Unit
Rate Rs.
8632 8633 8634 8635 8636 8637 8638 8639 8640 8641 8642 8643 8644 8645 9999
Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 75mm Outer dia. Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 90mm Outer dia. Poly propylene - Random - Co - polymer (PPR) pipes SDR - 11 110mm Outer dia. Poly propylene - Random - Co - polymer (PPR) pipes SDR - 11160mm Outer dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 15 mm outer dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm outer dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm outer dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 32 mm outer dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 40 mm outer dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 50 mm outer dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 62.5mm inner dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 75 mm inner dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 100 mm inner dia. Chlorinated Polyvinyl - chloride (CPVC) pipe 150 mm inner dia. Sundries
metre metre metre metre metre metre metre metre metre metre metre metre metre metre L.S.
575.00 917.00 962.00 2,028.00 45.00 55.00 78.00 105.00 150.00 245.00 783.00 1,030.00 1,430.00 2,490.00 1.00
288
18.0 WATER SUPPLY

PE AL PE COMPOSITE PRESSURE PIPES 18.1 Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-ALPE) Composite Pressure Pipes conforming to IS - 15450 U.V. stabilized with carbon black having thermal stability for hot & cold o water supply, capable to withstand temperature up to 80 C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc. with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge. Internal work Exposed on wall 18.1.1 18.1.2 18.1.3 18.1.4 18.1.5 18.1.6 18.2 1216 (16 mm OD) pipe 1620 (20 mm OD) pipe 2025 (25 mm OD) pipe 2532 (32 mm OD) pipe 3240 (40 mm OD) pipe 4050 (50 mm OD) pipe metre metre metre metre metre metre 146.65 176.45 222.85 297.50 391.30 507.60
Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-ALPE) Composite Pressure Pipes conforming to IS - 15450 U.V. stabilized with carbon black having thermal stability for hot & cold o water supply, capable to withstand temperature up to 80 C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc. with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge. Concealed work including cutting chases and making good the wall etc. 18.2.1 18.2.2 18.2.3 18.2.4 1216 (16mm OD) pipe 1620 (20 mm OD) pipe 2025 (25 mm OD) pipe 2532 (32 mm OD) pipe
metre
metre metre metre
224.25 260.85 319.80 413.30
18.3
Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-ALPE) Composite Pressure Pipes conforming to IS - 15450 - 2004 U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80o C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required ) e.g. elbows ,tees ,reducers, couplers & connectors etc. with trenching, refilling and testing of joints complete as per direction of the engineer in charge.
SUBHEAD -18.0 WATER SUPPLY
289
Code No
Description
Unit
Rate Rs.
External work 18.3.1 18.3.2 18.3.3 18.3.4 18.3.5 18.3.6 1216 (16 mm OD) pipe 1620 (20 mm OD ) pipe. 2025 (25 mm OD ) pipe. 2532 (32 mm OD ) pipe. 3240 (40 mm OD ) pipe. 4050 (50 mm OD ) pipe. metre metre metre metre metre metre 143.95 171.10 214.90 284.35 371.50 487.75
PP- R PIPES 18.4 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4 U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply including all PP - R plain & brass threaded polypropylene random fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer in Charge. Internal work Exposed on wall 18.4.1 18.4.2 18.4.3 18.4.4 18.4.5 18.4.6 18.5 PN - 16 Pipe, 16 mm OD PN - 16 Pipe, 20 mm OD PN - 16 Pipe, 25 mm OD PN - 16 Pipe, 32 mm OD PN - 16 Pipe, 40 mm OD PN - 16 Pipe, 50 mm OD metre metre metre metre metre metre 71.15 96.40 135.30 205.40 314.30 436.60
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4 U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply including all PP - R plain & brass threaded polypropylene random fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc., 18.5.1 18.5.2 18.5.3 18.5.4 PN - 16 Pipe, 16 mm OD PN - 16 Pipe, 20 mm OD PN - 16 Pipe, 25 mm OD PN - 16 Pipe, 32 mm OD metre metre metre metre 122.65 153.10 201.90 289.30
18.6
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply including all PP R plain & brass threaded polypropylene random fittings including trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.
290
Code No
Description
Unit
Rate Rs.
External work 18.6.1 18.6.2 18.6.3 18.6.4 18.6.5 18.6.6 18.6.7 18.6.8 18.6.9 18.6.10 18.6.11 PN - 16 Pipe, 16 mm OD (SDR 7.4) PN - 16 Pipe, 20 mm OD (SDR 7.4) PN - 16 Pipe, 25 mm OD (SDR 7.4) PN - 16 Pipe, 32 mm OD (SDR 7.4) PN - 16 Pipe, 40 mm OD (SDR 7.4) PN - 16 Pipe, 50 mm OD (SDR 7.4) PN - 16 Pipe, 63mm OD (SDR 7.4) PN - 16 Pipe, 75 mm OD (SDR 7.4) PN - 16 Pipe, 90 mm OD (SDR 7.4) PN - 10 Pipe, 110 mm OD (SDR - 11) PN - 10 Pipe, 160 mm OD (SDR - 11) metre metre metre metre metre metre metre metre metre metre metre 68.45 91.10 129.45 194.40 294.50 416.80 639.50 903.70 1,431.50 1,499.45 3,134.30
C.P.V.C. PIPES 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 18.7.1 18.7.2 18.7.3 18.7.4 18.7.5 18.7.6 18.8 15 mm nominal outer dia .Pipes. 20 mm nominal outer dia .Pipes. 25 mm nominal outer dia .Pipes. 32 mm nominal outer dia .Pipes. 40 mm nominal outer dia .Pipes. 50 mm nominal outer dia .Pipes. metre metre metre metre metre metre 97.95 115.65 150.40 196.35 275.05 418.50
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. 18.8.1 18.8.2 18.8.3 15 mm nominal outer dia .Pipes. 20 mm nominal outer dia .Pipes. 25 mm nominal outer dia .Pipes. metre metre metre 155.15 175.50 222.25
291
Code No
Description
Unit
Rate Rs. 277.10
18.8.4 18.9
32 mm nominal outer dia .Pipes.
metre
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. External work 18.9.1 18.9.2 18.9.3 18.9.4 18.9.5 18.9.6 18.9.7 18.9.8 18.9.9 18.9.10 15 mm nominal outer dia .Pipes. 20 mm nominal outer dia .Pipes. 25 mm nominal outer dia .Pipes. 32 mm nominal outer dia .Pipes. 40 mm nominal outer dia .Pipes. 50 mm nominal outer dia .Pipes. 62.50 mm nominal inner dia Pipes. 75 mm nominal inner dia .Pipes. 100mm nominal inner dia .Pipes. 150 mm nominal inner dia .Pipes. metre metre metre metre metre metre metre metre metre metre 92.60 107.70 144.55 185.30 255.25 398.65 1,217.80 1,590.75 2,206.10 3,831.90
18.10
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work Exposed on wall. 18.10.1 18.10.2 18.10.3 18.10.4 18.10.5 18.10.6 15 mm dia. nominal bore 20 mm dia. nominal bore 25 mm dia. nominal bore 32 mm dia. nominal bore 40 mm dia. nominal bore 50 mm dia. nominal bore metre metre metre metre metre metre 105.85 133.85 179.65 226.10 264.05 342.90
18.11
Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall 18.11.1 18.11.2 15 mm dia nominal bore 20 mm dia nominal bore metre metre 144.75 170.15
18.12
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 18.12.1 18.12.2 18.12.3 15 mm dia. nominal bore 20 mm dia. nominal bore 25 mm dia. nominal bore metre metre metre 94.05 116.60 156.85
292
Code No
Description
Unit
Rate Rs. 193.60 219.60 280.10 356.15 458.15
18.12.4 18.12.5 18.12.6 18.12.7 18.12.8 18.13
32 mm dia. nominal bore 40 mm dia. nominal bore 50 mm dia. nominal bore 65 mm dia. nominal bore 80 mm dia. nominal bore
metre metre metre metre metre
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 18.13.1 18.13.2 25 to 40 mm nominal bore 50 to 80 mm nominal bore each each 166.05 423.20
18.14
Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately). BRASS FITTINGS
each
121.90
18.15
Providing and fixing brass bib cock of approved quality : 18.15.1 18.15.2 15 mm nominal bore 20 mm nominal bore each each 191.70 235.20
18.16
Providing and fixing brass stop cock of approved quality : 18.16.1 18.16.2 15 mm nominal bore 20 mm nominal bore each each 191.70 235.20
18.17
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 18.17.1 18.17.2 18.17.3 18.17.4 18.17.5 18.17.6 25 mm nominal bore 32 mm nominal bore. 40 mm nominal bore 50 mm nominal bore 65 mm nominal bore 80 mm nominal bore each each each each each each 285.50 358.00 399.00 578.20 831.75 1,369.25
18.18
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 18.18.1 18.18.2 18.18.3 15 mm nominal bore 20 mm nominal bore 25 mm nominal bore each each each 228.35 333.25 385.90
18.19
Providing and fixing gun metal non- return valve of approved quality (screwed end) : 18.19.1 25 mm nominal bore
293
Code No
Description
Unit
Rate Rs. 292.15 317.70
18.19.1.1 18.19.1.2 18.19.2 18.19.2.1 18.19.2.2 18.19.3 18.19.3.1 18.19.3.2 18.19.4 18.19.4.1 18.19.4.2 18.19.5 18.19.5.1 18.19.5.2 18.19.6 18.19.6.1 18.19.6.2 18.20
Horizontal Vertical 32 mm nominal bore Horizontal Vertical 40 mm nominal bore Horizontal Vertical 50 mm nominal bore Horizontal Vertical 65 mm nominal bore Horizontal Vertical 80 mm nominal bore Horizontal Vertical
each each
each each
371.45 464.40
each each
494.95 605.30
each each
738.20 847.40
each each
1,282.10 1,467.95
each each
1,812.25 2,390.70
Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 18.20.1 18.20.2 18.20.3 15 mm nominal bore 20 mm nominal bore 25 mm nominal bore each each each 139.75 187.20 243.70
18.21
Providing and fixing uplasticised PVC connection pipe with brass unions : 18.21.1 18.21.1.1 18.21.1.2 18.21.2 18.21.2.1 18.21.2.2 30 cm length 15 mm nominal bore 20 mm nominal bore 45 cm length 15 mm nominal bore 20 mm nominal bore each each 44.75 56.35 each each 35.10 43.25
18.22
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 18.22.1 18.22.2 100 mm diameter 150 mm diameter each each 40.40 55.80
C.I/ DUCTILE IRON PIPES & SPECIALS 18.23 Laying in position centrifugally cast (spun) iron S&S or flanged pipes quintal 55.55
294
Code No
Description
Unit
Rate Rs.
(excluding cost of pipe) 18.24 18.25 Laying in position S&S or flanged C.I. special such as tees, bends, collars, tapers and caps etc.(excluding cost of specials). Providing and laying S&S C.I. standard specials such as tees, bends, collars, tapers, caps etc. (Heavy class) : 18.25.1 18.25.2 18.26 Up to 300 mm dia. Over 300 mm dia. quintal quintal 2,893.35 3,119.85 quintal 100.25
Providing and laying flanged C.I. standard specials such as tees, bends, collars, tapers, caps etc., suitable for flanged jointing as per IS : 1538 : 18.26.1 18.26.2 Up to 300 mm dia. Over 300 mm dia. quintal quintal 5,123.45 5,648.45
18.27
Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 : 18.27.1 18.27.2 18.27.3 18.27.4 18.27.5 18.27.6 18.27.7 18.27.8 18.27.9 18.27.10 18.27.11 100 mm dia. pipe 125 mm dia. pipe 150 mm dia. pipe 200 mm dia. pipe 250 mm dia. pipe 300 mm dia. pipe 350 mm dia. pipe 400 mm dia. pipe 450 mm dia. pipe 500 mm dia. pipe 600 mm dia. pipe metre metre metre metre metre metre metre metre metre metre metre 737.15 902.35 1,066.65 1,484.00 2,106.80 2,800.00 3,455.55 4,233.20 5,065.65 6,165.95 8,149.40
18.28
Providing lead caulked joints to spun iron or C.I. pipes and specials including testing of joints but excluding the cost of pig lead : 18.28.1 18.28.2 18.28.3 18.28.4 18.28.5 18.28.6 18.28.7 18.28.8 18.28.9 100 mm diameter pipe 125 mm diameter pipe 150 mm diameter pipe 200 mm diameter pipe 250 mm diameter pipe 300 mm diameter pipe 350 mm diameter pipe 400 mm diameter pipe 450 mm diameter pipe each each each each each each each each each 82.25 120.45 123.30 163.45 204.20 246.35 256.00 332.10 371.60
295
Code No
Description
Unit
Rate Rs. 393.70 528.40 6,742.20
18.28.10 18.28.11 18.29 18.30
500 mm diameter pipe 600 mm diameter pipe
each each quintal
Supplying pig lead at site of work. Providing flanged joints to double flanged C.I./ D.I. pipes and specials including testing of joints : 18.30.1 18.30.2 18.30.3 18.30.4 18.30.5 18.30.6 18.30.7 18.30.8 18.30.9 18.30.10 18.30.11 18.30.12 80 mm diameter pipe 100 mm diameter pipe 125 mm diameter pipe 150 mm diameter pipe 200 mm diameter pipe 250 mm diameter pipe 300 mm diameter pipe 350 mm diameter pipe 400 mm diameter pipe 450 mm diameter pipe 500 mm diameter pipe 600 mm diameter pipe
each each each each each each each each each each each each
65.60 113.00 114.15 156.90 162.70 236.75 246.05 335.05 564.20 702.00 778.45 892.00
C.I. SLUICE VALVES/ FIRE HYDRANTS & FIXTURES 18.31 Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 18.31.1 18.31.1.1 18.31.1.2 18.31.2 18.31.2.1 18.31.2.2 18.31.3 18.31.3.1 18.31.3.2 18.31.4 18.31.4.1 18.31.4.2 18.31.5 18.31.5.1 100 mm diameter Class I Class II 125 mm diameter Class I Class II 150 mm diameter Class I Class II 200 mm diameter Class I Class II 250 mm diameter Class I each 10,013.80 each each 6,731.80 7,221.20 each each 3,689.10 3,889.75 each each 3,034.75 3,163.60 each each 2,468.05 2,550.45
296
Code No
Description
Unit
Rate Rs. 10,240.90
18.31.5.2 18.31.6 18.31.6.1 18.31.6.2 18.32
Class II 300 mm diameter Class I Class II
each
each each
12,270.50 12,718.30
Constructing masonry Chamber 30x30x50 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design : 18.32.1 With F.P.S. bricks each 599.80
18.33
Constructing masonry Chamber 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size ) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 18.33.1 With F.P.S. bricks each 3,595.30
18.34
Constructing masonry Chamber 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 18.34.1 With F.P.S. bricks each 6,147.95
18.35
Constructing masonry Chamber 120x120x100 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a
297
Code No
Description
Unit
Rate Rs.
floating coat of neat cement complete as per standard design : 18.35.1 18.36 With F.P.S. bricks each 8,528.75
Constructing masonry Chamber 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350x350 mm. top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 18.36.1 With F.P.S. bricks each 3,388.65
18.37
Constructing masonry Chamber 60x45x50 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 18.37.1 With F.P.S. bricks each 3,366.00
18.38
Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work : 18.38.1 18.38.2 18.38.3 18.38.4 18.38.5 18.38.6 15 mm diameter pipe. 20 mm diameter pipe. 25 mm diameter pipe. 32 mm diameter pipe. 40 mm diameter pipe. 50 mm diameter pipe. metre metre metre metre metre metre 4.65 5.45 7.20 8.50 10.10 11.80
18.39
Repainting G.I. pipes and fittings with synthetic enamel white paint of approved quality : 18.39.1 18.39.2 18.39.3 18.39.4 18.39.5 18.39.6 15 mm diameter pipe. 20 mm diameter pipe. 25 mm diameter pipe 32 mm diameter pipe 40 mm diameter pipe 50 mm diameter pipe metre metre metre metre metre metre 2.45 2.85 3.70 4.30 5.05 5.90
18.40
Painting G.I. pipes and fittings with two coats of anti-corrosive
298
Code No
Description
Unit
Rate Rs.
bitumastic paint of approved quality : 18.40.1 18.40.2 18.40.3 18.40.4 18.40.5 18.40.6 18.40.7 18.40.8 18.41 15 mm diameter pipe 20 mm diameter pipe 25 mm diameter pipe 32 mm diameter pipe 40 mm diameter pipe 50 mm diameter pipe 65 mm diameter pipe 80 mm diameter pipe metre metre metre metre metre metre metre metre 2.60 3.05 3.90 4.55 5.20 6.10 7.50 8.65
Providing and filling sand of grading zone V or coarser grade allround the G.I. pipes in external work. 18.41.1 18.41.2 18.41.3 18.41.4 18.41.5 18.41.6 18.41.7 18.41.8 18.41.9 18.41.10 15 mm diameter pipe 20 mm diameter pipe 25 mm diameter pipe 32 mm diameter pipe 40 mm diameter pipe 50 mm diameter pipe 65 mm diameter pipe 80 mm diameter pipe 100 mm diameter pipe 150 mm diameter pipe metre metre metre metre metre metre metre metre metre metre 21.95 22.25 22.85 23.40 23.70 24.60 38.85 40.00 42.40 63.15
18.42
Boring with 100 mm diameter casing pipe for hand pump/ tube well in all soils except ordinary hard rocks requiring blasting including removing the casing pipe after the hand pipe/tube well is lowered and tested : 18.42.1 18.42.2 18.42.3 Up to 6 metres depth. Beyond 6 m and up to 12 m depth. Beyond 12 m and up to 18 m depth. metre metre metre metre metre each 151.00 179.25 208.70 367.35 209.00 576.80
18.43 18.44 18.45 18.46
Providing and placing in position filters of 40 mm diameter G.I. pipe with brass strainer of approved quality. Providing and fixing to filter and lowering to proper levels 40 mm G.I. pipe for tube well including cleaning and priming the tube well. Providing and placing in position hand pump of approved quality for 40 mm diameter G.I. pipe complete with all accessories. Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 18.46.1 15 mm nominal bore
each
75.90
299
Code No
Description
Unit
Rate Rs. 96.80 107.25 123.55 164.20 235.60 428.40 507.40
18.46.2 18.46.3 18.46.4 18.46.5 18.46.6 18.46.7 18.46.8 18.47
20 mm nominal bore 25 mm nominal bore 32 mm nominal 40 mm nominal bore 50mm nominal bore 65mm nominal bore 80 mm nominal bore
each each each each each each each
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 18.47.1 18.47.2 18.47.3 18.47.4 18.47.5 18.47.6 18.47.7 18.47.8 15 mm nominal bore. 20 mm nominal bore. 25 mm nominal bore. 32 mm nominal bore. 40 mm nominal bore. 50 mm nominal bore. 65 mm nominal bore. 80 mm nominal bore. each each each each each each each each 149.20 170.10 180.55 196.80 237.45 335.50 528.30 607.30
18.48
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank C.P.BRASS FITTINGS.
per litre
5.25
18.49
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 18.49.1 15 mm nominal bore. each 313.10
18.50
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 18.50.1 15 mm nominal bore. each 274.40
18.51
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 18.51.1 15 mm nominal bore each 315.80
18.52
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 18.52.1 15 mm nominal bore. each 313.10
300
Code No 18.53
Description
Unit
Rate Rs.
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore 18.53.1 15mm nominal bore each 347.65
PTMT FITTINGS 18.54 Providing and fixing PTMT bib cock of approved quality and colour. 18.54.1 18.54.2 18.54.3 18.54.4 18.55 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. 15 mm nominal bore, 122mm long. Weighing not less than 99 gms. 15 mm nominal bore, 165mm long. Weighing not less than 110 gms. 15mm nominal bore, 90mm long. Weighing not less than 93 gms. each each each each 120.85 166.15 189.40 137.15
Providing and fixing PTMT stop cock of approved quality and colour. 18.55.1 18.55.2 18.55.3 15 mm nominal bore, 86mm long. Weighing not less than 88 gms. 20mm nominal bore, 89mm long. Weighing not less than 88 gms. Concealed stop cock, 15mm nominal bore, 108mm long. Weighing not less than 108 gms. each each each 120.85 148.75 195.20
18.56
Providing and fixing PTMT pillar cock of approved quality and colour . 18.56.1 18.56.2 15mm nominal bore, 107mm long. Weighing not less than 110 gms. 15mm nominal bore, 125mm long foam flow. Weighing not less than 120 gms. each each 185.25 266.55
18.57
Providing and fixing PTMT, push cock of approved quality and colour. 18.57.1 18.57.2 15 mm nominal bore, 98mm long. Weighing not less than 75 gms. 15 mm nominal bore, 80mm long. Weighing not less than 46 gms. each each 113.90 96.45
18.58
Providing and fixing PTMT grating of approved quality and colour. 18.58.1 18.58.1.1 18.58.1.2 18.58.2 18.58.2.1 Circular type. 100 mm nominal dia. 125 mm nominal dia with 25 mm waste hole. Rectangular type with openable circular lid. 150 mm nominal size square 100 mm diameter of the inner hinged round grating. each 109.35 each each 39.70 46.65
301
Code No
Description
Unit
Rate Rs.
AIR VALVE & WATER METER (BULK TYPE) 18.59 Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) : 18.59.1 18.59.2 18.59.3 18.60 50 mm dia 80 mm dia 100 mm dia each each each 3,615.70 5,276.65 6,858.75
Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) : 18.60.1 18.60.2 18.60.3 18.60.4 80 mm dia nominal bore 100 mm dia nominal bore 150 mm dia nominal bore 200 mm dia nominal bore each each each each 2,448.40 3,719.80 5,261.80 5,914.55
18.61
Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts, bolts, rubber insertions etc. complete conforming to IS : 2373 : 18.61.1 18.61.2 18.61.3 18.61.4 80 mm dia 100 mm dia. 150 mm dia 200 mm dia each each each each 3,110.45 4,672.20 6,067.85 8,404.80
18.62
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 18.62.1 18.62.2 18.62.3 18.62.4 18.62.5 15 mm nominal bore, 105 mm long. Weighing not less than 138 gms. 20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. 25 mm nominal bore, 152mm long. Weighing not less than 440 gms. 40mm nominal bore, 206mm long. Weighing not less than 690 gms. 50mm nominal bore, 242mm long. Weighing not less than 1240 gms. each each each each each each each 165.60 234.50 497.40 902.75 1,338.30 148.75 101.95
18.63 18.64
Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. Providing and fixing PTMT swivelling shower, 15mm nominal bore. Weighing not less than 40gms.
302
Code No 18.65
Description
Unit
Rate Rs.
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms. Providing and laying S&S C.I. Standard specials such as tees, bends, collars tapers and caps etc, suitable for flanged jointing as per IS : 1538 : 18.66.1 18.66.2 Up to 300 mm dia Above 300 mm dia
each
133.30
18.66
quintal quintal
4,205.85 4,737.80
18.67
Providing and laying S&S C.I. Standard specials suitable for mechanical jointing as per IS : 13382 18.67.1 18.67.2 Up to 300 mm dia Above 300 mm dia quintal quintal 6,305.85 6,586.90
18.68
Providing and laying D.I. specials of class K-12 suitable for push-on jointing as per IS : 9523 18.68.1 18.68.2 Up to 600 mm dia Above 600 mm dia quintal quintal 10,487.25 15,685.00
18.69
Providing and laying D.I. Specials of Class K - 12 suitable for mechanical jointing as per IS : 9523 : 18.69.1 18.69.2 Up to 600 mm dia Above 600 mm dia quintal quintal 11,023.85 16,644.40
18.70
Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket : 18.70.1 18.70.2 18.70.3 18.70.4 18.70.5 18.70.6 18.70.7 18.70.8 18.70.9 18.70.10 18.70.11 18.70.12 18.70.13 18.70.14 100 mm dia pipes 150 mm dia pipes 200 mm dia pipes 250 mm dia pipes 300 mm dia pipes 350 mm dia pipes 400 mm dia pipes 450 mm dia pipes 500 mm dia pipes 600 mm dia pipes 650 mm dia pipes 700 mm dia pipes 800 mm di a pipes 900 mm dia pipes joint joint joint joint joint joint joint joint joint joint joint joint joint joint 39.00 60.30 98.20 111.70 153.10 182.15 340.40 378.35 393.20 489.30 739.65 853.45 953.35 1,255.25
303
Code No
Description
Unit
Rate Rs. 1,523.90
18.70.15 18.71
1000 mm dia pipes
joint
Providing and laying Double Flanged (screwed/ welded) Centrifugally (Spun) Cast Iron, Class B (IS : 1536) : 18.71.1 18.71.2 18.71.3 18.71.4 18.71.5 18.71.6 18.71.7 18.71.8 18.71.9 18.71.10 100 mm dia C.I. Double Flanged Pipe 150 mm dia C.I. Double Flanged Pipe 200 mm dia C.I. Double Flanged Pipe 250 mm dia C.I. Double Flanged Pipe 300 mm dia C.I. Double Flanged Pipe 350 mm dia C.I. Double Flanged Pipe 400 mm dia C.I. Double Flanged Pipe 450 mm dia C.I. Double Flanged Pipe 500 mm dia C.I. Double Flanged Pipe 600 mm dia C.I. Double Flanged Pipe metre metre metre metre metre metre metre metre metre metre 1,151.15 1,781.85 2,468.85 3,304.85 4,201.30 5,372.75 6,940.35 8,985.75 11,716.30 15,287.90
18.72
Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 : 18.72.1 18.72.2 18.72.3 18.72.4 18.72.5 18.72.6 18.72.7 18.72.8 18.72.9 18.72.10 18.72.11 18.72.12 18.72.13 18.72.14 18.72.15 18.72.16 18.72.17 18.72.18 18.72.19 18.72.20 100 mm dia Ductile Iron Class K-7 pipes 150 mm dia Ductile Iron Class K-7 pipes 200 mm dia Ductile Iron Class K-7 pipes 250 mm dia Ductile Iron Class K-7 pipes 300 mm dia Ductile Iron Class K-7 pipes 350 mm dia Ductile Iron Class K-7 pipes 400 mm dia Ductile Iron Class K-7 pipes 450 mm dia Ductile Iron Class K-7 pipes 500 mm dia Ductile Iron Class K-7 pipes 600 mm dia Ductile Iron Class K-7 pipes 700 mm dia Ductile Iron Class K-7 pipes 800 mm dia Ductile Iron Class K-7 pipes 900 mm dia Ductile Iron Class K-7 pipes 1000 mm dia Ductile Iron Class K-7 pipes 100 mm dia Ductile Iron Class K-9 pipes 150 mm dia Ductile Iron Class K-9 pipes 200 mm dia Ductile Iron Class K-9 pipes 250 mm dia Ductile Iron Class K-9 pipes 300 mm dia Ductile Iron Class K-9 pipes 350 mm dia Ductile Iron Class K-9 pipes metre metre metre metre metre metre metre metre metre metre metre metre metre metre metre metre metre metre metre metre 703.30 1,025.40 1,457.15 1,972.55 2,784.90 3,214.25 3,837.60 4,550.35 5,367.20 7,081.30 8,795.70 12,243.20 15,055.70 18,247.50 775.50 1,152.80 1,589.45 2,056.35 2,639.45 3,102.25
304
Code No
Description
Unit
Rate Rs. 4,435.65 4,925.90 6,591.35 7,404.65 10,052.75 11,464.10 11,808.40 13,770.10 15,500.90
18.72.21 18.72.22 18.72.23 18.72.24 18.72.25 18.72.26 18.72.27 18.72.28 18.72.29 18.73
400 mm dia Ductile Iron Class K-9 pipes 450 mm dia Ductile Iron Class K-9 pipes 500 mm dia Ductile Iron Class K-9 pipes 600 mm dia Ductile Iron Class K-9 pipes 700 mm dia Ductile Iron Class K-9 pipes 750 mm dia Ductile Iron Class K-9 pipes 800 mm dia Ductile Iron Class K-9 pipes 900 mm dia Ductile Iron Class K-9 pipes 1000 mm dia Ductile Iron Class K-9 pipes
metre metre metre metre metre metre metre metre metre
Providing and laying Double Flanged (Screwed/ Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS : 8329 : 18.73.1 18.73.2 18.73.3 18.73.4 18.73.5 18.73.6 18.73.7 18.73.8 18.73.9 18.73.10 18.73.11 100 mm dia Ductile Iron Double Flanged 150 mm dia Ductile Iron Double Flanged 200 mm dia Ductile Iron Double Flanged 250 mm dia Ductile Iron Double Flanged 300 mm dia Ductile Iron Double Flanged 350 mm dia Ductile Iron Double Flanged 400 mm dia Ductile Iron Double Flanged 450 mm dia Ductile Iron Double Flanged 500 mm dia Ductile Iron Double Flanged 600 mm dia Ductile Iron Double Flanged 700 mm dia Ductile Iron Double Flanged metre metre metre metre metre metre metre metre metre metre metre 2,206.35 3,055.35 3,963.40 5,262.65 6,771.65 8,434.20 10,076.25 12,180.70 14,761.20 20,023.70 24,693.40
18.74
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts collar and bush of approved quality and colour. 18.74.1 18.74.2 15 mm nominal bore with 30cm length. 15 mm nominal bore with 45 cm length. each each 45.55 52.90
18.75
Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 18.75.1 18.75.2 18.75.3 15 mm nominal bore. Weighing not less than 32 gms. 20mm nominal bore. Weighing not less than 40gms. 25mm nominal bore. Weighing not less than 62 gms. each each each 38.75 45.75 66.65
18.76
Cutting holes up to 30x30 cm in walls including making good the same: 18.76.1 With F.P.S. bricks each each 90.90 82.25
18.77
Cutting holes up to 15x15cm in R.C.C. floors and roofs for passing
305
Code No
Description
Unit
Rate Rs.
drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof. 18.78 18.79 Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 coarse sand 6 graded stone aggregate 20 mm nominal size) including disposal of malba. Disinfecting C.I. water mains by flushing with water containing bleaching powder at 0.5 gms per litre of water and cleaning the same with fresh water, operation to be repeated three times including getting the sample of water from the disinfected main tested in the municipal laboratory. 18.80.1 18.80.2 18.80.3 18.80.4 18.80.5 18.80.6 18.80.7 18.80.8 18.80.9 18.80.10 18.80.11 18.80.12 18.81 80 mm diameter C.I. pipe 100 mm diameter C.I. pipe 125 mm diameter C.I. pipe 150 mm diameter C.I. pipe 200 mm diameter C.I. pipe 250 mm diameter C.I. pipe 300 mm diameter C.I. pipe 350 mm diameter C.I. pipe 400 mm diameter C.I. pipe 450 mm diameter C.I. pipe 500 mm diameter C.I. pipe 600 mm diameter C.I. pipe 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 289.75 381.15 478.85 580.80 786.95 1,007.55 1,150.00 1,302.95 1,470.50 1,645.65 1,834.55 2,235.70 metre 36.65
metre
70.05
18.80
Extra for every operation disinfecting the C.I. main by flushing with water containing bleaching powder at 0.5 gms per litre of water and cleaning the same with fresh water, including getting the samples of water tested in the municipal laboratory: 18.81.1 18.81.2 18.81.3 18.81.4 18.81.5 18.81.6 18.81.7 18.81.8 80 mm diameter C.I. pipe 100 mm diameter C.I. pipe 125 mm diameter C.I. pipe 150 mm diameter C.I. pipe 200 mm diameter C.I. pipe 250 mm diameter C.I. pipe 300 mm diameter C.I. pipe 350 mm diameter C.I. pipe 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 106.85 130.05 159.55 188.25 283.70 335.95 388.50 463.95
306
Code No
Description
Unit
Rate Rs. 542.10 624.90 709.35 887.95
18.81.9 18.81.10 18.81.11 18.81.12 18.82
400 mm diameter C.I. pipe 450 mm diameter C.I. pipe 500 mm diameter C.I. pipe 600 mm diameter C.I. pipe
100 metre 100 metre 100 metre 100 metre
Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes at site lead up to 50 metre: 18.82.1 18.82.2 18.82.3 18.82.4 18.82.5 18.82.6 18.82.7 18.82.8 18.82.9 18.82.10 18.82.11 18.82.12 80 mm diameter C.I. pipe 100 mm diameter C.I. pipe 125 mm diameter C.I. pipe 150 mm diameter C.I. pipe 200 mm diameter C.I. pipe 250 mm diameter C.I. pipe 300 mm diameter C.I. pipe 350 mm diameter C.I. pipe 400 mm diameter C.I. pipe 450 mm diameter C.I. pipe 500 mm diameter C.I. pipe 600 mm diameter C.I. pipe metre metre metre metre metre metre metre metre metre metre metre metre 82.65 85.35 87.80 90.45 99.95 109.30 117.30 124.60 131.15 137.95 143.65 153.20
18.83
Labour for cutting C.I. pipe with steel saw. 18.83.1 18.83.2 18.83.3 18.83.4 18.83.5 18.83.6 18.83.7 18.83.8 18.83.9 18.83.10 18.83.11 18.83.12 80 mm diameter C.I. pipe 100 mm diameter C.I. pipe 125 mm diameter C.I. pipe 150 mm diameter C.I. pipe 200 mm diameter C.I. pipe 250 mm diameter C.I. pipe 300 mm diameter C.I. pipe 350 mm diameter C.I. pipe 400 mm diameter C.I. pipe 450 mm diameter C.I. pipe 500 mm diameter C.I. pipe 600 mm diameter C.I. pipe Each cut Each cut Each cut Each cut Each cut Each cut Each cut Each cut Each cut Each cut Each cut Each cut 22.10 29.80 41.75 56.15 74.90 92.65 111.40 129.10 147.70 165.60 184.20 218.55
307
SUB HEAD : 19.0
DRAINAGE
309
BASIC RATES (SH: 19.0 DRAINAGE)

Code No 0101 0103 0114 0115 0123 0124 0285 0287 0362 0367 0983 1003 1006 1336 1337 1352 1353 1354 1355 1356 1357 1364 1366 1367 1617 1618 1621 1622 1628 1700 1701 Description Unit Rate Rs. 138.45 141.60 135.25 135.25 151.50 141.60 350.00 360.00 253.00 4,500.00 320.00 3,050.00 3,175.00 37.00 41.00 265.00 170.00 1,395.00 844.00 4,257.00 2,129.00 10.00 19.00 23.00 610.00 1,205.00 178.00 407.00 265.00 118.00 135.00
Bhisti Blacksmith 2nd class Beldar Coolie Mason (brick layer) 1st class Mason (brick layer) 2nd class Brick Aggregate (Single size) : 63 mm nominal size Brick Aggregate (Single size) : 40 mm nominal size Brick bats Portland Cement Fine sand (zone IV) Mild steel round bar above 12 mm dia Mild steel square bars Clearing eye with chain and lid 100 mm dia Clearing eye with chain and lid 150 mm dia C.I. cover and frame 300x300 mm inside C.I. cover without frame 300x300mm inside i/c cover of 4.50 kg Rectangular cover 455x610 mm with frame (low duty) Rectangular cover 455x610mm without frame (low duty) 500 mm dia cover with frame (medium duty) 500 mm dia cover without frame (medium duty) C.I. grating 100x100 mm C.I. grating 150x150 mm C.I. grating 180x180 mm S.C.I. soil, waste and vent single socketed pipe1.80 metres long: 100mm dia S.C.I. soil, waste and vent single socketed pipe1.80 metres long: 150mm dia S.C.I. plain bend 100mm dia S.C.I. plain bend 150mm dia S.C.I. plain single equal junctions100x100x100 mm dia R.C.C. pipes NP2 class 100 mm dia R.C.C. pipes NP2 class 150 mm dia
Day Day Day Day Day Day cum cum cum tonne cum quintal quintal each each each each each each each each each each each each each each each each metre metre
SUB HEAD 19.0 DRAINAGE
311
Code No 1702 1703 1704 1705 1706 1707 1709 1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1723 1724 1725 1726 1727 1854 1855 1856 1857 1858 1859 1881 1900 1902 1904
Description R.C.C. pipes NP2 class 250 mm dia R.C.C. pipes NP2 class 300 mm dia R.C.C. pipes NP2 class 450 mm dia R.C.C. pipes NP2 class 500 mm dia R.C.C. pipes NP2 class 600 mm dia R.C.C. pipes NP2 class 700 mm dia R.C.C. pipes NP2 class 800 mm dia R.C.C. pipes NP2 class 900 mm dia R.C.C. pipes NP2 class 1000 mm dia R.C.C. pipes NP2 class 1100 mm dia R.C.C. pipes NP2 class 1200 mm dia R.C.C. collarsNP2 class 100 mm dia R.C.C. collarsNP2 class 150 mm dia R.C.C. collarsNP2 class 250 mm dia R.C.C. collarsNP2 class 300 mm dia R.C.C. collarsNP2 class 450 mm dia R.C.C. collarsNP2 class 500 mm dia R.C.C. collarsNP2 class 600 mm dia R.C.C. collarsNP2 class 700 mm dia R.C.C. collarsNP2 class 800 mm dia R.C.C. collarsNP2 class 900 mm dia R.C.C. collarsNP2 class 1000 mm dia R.C.C. collarsNP2 class 1100 mm dia R.C.C. collarsNP2 class 1200 mm dia Stoneware pipes grade A (60 cm long) 100 mm dia Stoneware pipes grade A (60 cm long) 150 mm dia Stoneware pipes grade A (60 cm long) 200 mm dia Stoneware pipes grade A (60 cm long) 230 mm dia Stoneware pipes grade A (60 cm long) 250 mm dia Stoneware pipes grade A (60 cm long) 300 mm dia Spun yarn S.W. gully trap P type 100x100 mm S.W. gully trap P type 150x100 mm S.W. gully trap P type 180x150 mm
Unit metre metre metre metre metre metre metre metre metre metre metre each each each each each each each each each each each each each each each each each each each kilogram each each each
Rate Rs. 157.00 228.00 333.00 398.00 642.00 719.00 836.00 986.00 1,243.00 1,500.00 1,543.00 16.00 21.00 34.00 42.00 63.00 73.00 92.00 102.00 146.00 178.00 210.00 241.00 280.00 30.00 42.00 80.00 85.00 113.00 165.00 30.00 55.00 86.00 160.00
312
Code No 2201 2209 2224 2225 2226 2227 2228 2229 2260 2261 2275 2281 2287 2290 2299 2303 2331 2332 2333 2334 2602 3860 3861 7087 7128 7129 7130 7131 7132 7133 7134
Description Carriage of Bricks Carriage of Cement Carriage of S.W. pipes100 mm dia Carriage of S.W. pipes150 mm dia Carriage of S.W. pipes200 mm dia Carriage of S.W. pipes230 mm dia Carriage of S.W. pipes250 mm dia Carriage of S.W. pipes300 mm dia Carriage of Brick aggregate Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna sand) Carriage of R.C.C. pipes 100 mm dia Carriage of R.C.C. pipes 150 mm dia Carriage of R.C.C. pipes 250 mm dia Carriage of R.C.C. pipes 300 mm dia Carriage of R.C.C. pipes 450 & 500 mm dia Carriage of R.C.C. pipes 600, 700, 750 & 800 mm dia Carriage of R.C.C. pipes 900 mm dia Carriage of R.C.C. pipes 1000 mm dia Carriage of R.C.C. pipes 1100 mm dia Carriage of R.C.C. pipes 1200 mm dia F.P.S. bricks class designation 75 560 mm dia cover with frame (Heavy duty) 560 mm dia cover without frame (Heavy duty) S.C.I. Tee 150 mm S.W. intercepting trap 100 mm dia S.W. intercepting trap 150 mm dia Rectangular shape 600x450 mm precast R.C.C. manhole cover with frame - L.D. - 25 Square shape 350x350 mm precast R.C.C. manhole cover with frame - L.D. - 25 Circular shape 450 mm dia precast R.C.C. manhole cover with frame - L.D. - 25 Rectangular shape 500x500 mm precast R.C.C. manhole cover with frame - M.D. - 10 Circular shape 500 mm dia precast R.C.C. manhole cover with frame - M.D. - 10
Unit 1000 Nos tonne 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre cum cum 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 1000 Nos each each each each each each each each each each
Rate Rs. 141.88 47.29 70.94 141.88 236.47 337.82 405.38 506.73 57.83 53.21 116.30 193.83 448.05 553.80 1,292.20 1,938.30 2,907.45 3,876.61 3,876.61 3,876.61 1,900.00 7,634.00 3,664.00 460.00 144.00 202.00 628.00 540.00 474.00 575.00 575.00
313
Code No 7135 7136 7354 7380 7381 9999
Description Circular shape 560 mm dia precast R.C.C. manhole cover with frame - H.D. - 20 Circular shape 560 mm dia precast R.C.C. manhole cover with frame - E.H.D. - 35 Plastic encapsulated M.S. foot rest 30x20x15 cm Precast R.C.C. grating with frame 500x450 mm horizontal grating Precast R.C.C. grating with frame 450x100 mm vertical grating Sundries
Unit each each each each each L.S.
Rate Rs. 838.00 935.00 93.00 533.00 250.00 1.00
314
19.0 DRAINAGE
NOTE : - The rates given for all the items under sub-head Drainage are applicable to work executed in soils above subsoil water level. Extra allowance has to be made for work under subsoil water level. STONE WARE PIPES AND FITTINGS 19.1 Providing, laying and jointing glazed stoneware pipes grade A with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 19.1.1 19.1.2 19.1.3 19.1.4 19.1.5 19.1.6 19.2 100 mm diameter 150 mm diameter 200 mm diameter 230 mm diameter 250 mm diameter 300 mm diameter metre metre metre metre metre metre 105.90 151.65 247.15 269.90 342.85 469.65
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: 19.2.1 19.2.2 19.2.3 19.2.4 19.2.5 100 mm diameter S.W. pipe 150 mm diameter S.W. pipe 200 mm diameter S.W. pipe 230 mm diameter S.W. pipe 250 mm diameter S.W. pipe metre metre metre metre metre 331.20 405.05 472.15 516.90 546.00
19.3
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 19.3.1 19.3.2 19.3.3 19.3.4 19.3.5 19.3.6 100 mm diameter S.W. pipe 150 mm diameter S.W. pipe 200 mm diameter S.W. pipe 230 mm diameter S.W. pipe 250 mm diameter S.W. pipe 300 mm diameter S.W. pipe metre metre metre metre metre metre 157.40 255.10 299.85 328.95 349.10 402.80
19.4
Providing and fixing square-mouth S.W. gully trap grade 'A' complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 19.4.1 100x100 mm size P type
SUBHEAD -19.0 DRAINAGE
315
Code No
Description
Unit
Rate Rs. 935.15 1,033.35
19.4.1.1 19.4.1.2 19.4.2 19.4.2.1 19.4.2.2 19.4.3 19.4.3.1 19.4.3.2 19.5
With F.P.S. Bricks class designation 75 With Sewer bricks conforming to IS : 4885 150 x 100 mm size P type. With F.P.S. bricks class designation 75 With sewer bricks conforming to IS : 4885 180x150 mm size P type With F.P.S. bricks class designation 75 With Sewer bricks conforming to IS : 4885
each each
each each
961.95 1,060.15
each each
1,036.75 1,134.95
Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps: 19.5.1 19.5.2 19.5.3 19.5.4 19.5.5 19.5.6 19.5.7 19.5.8 19.5.9 100 mm diameter 150 mm diameter 200 mm diameter 230 mm diameter 250 mm diameter 300 mm diameter 350 mm diameter 400 mm diameter 450 mm diameter metre metre metre metre metre metre metre metre metre 13.35 14.75 15.70 16.20 16.65 17.60 20.25 22.15 23.10
19.6
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 19.6.1 19.6.2 19.6.3 19.6.4 19.6.5 19.6.6 19.6.7 19.6.8 19.6.9 19.6.10 19.6.11 19.6.12 100 mm dia. R.C.C. pipe 150 mm dia. R.C.C. pipe 250 mm dia. R.C.C. pipe 300 mm dia. R.C.C. pipe 450 mm dia. R.C.C. pipe 500 mm dia. R.C.C. pipe 600 mm dia. R.C.C. pipe 700 mm dia. R.C.C. pipe 800 mm dia. R.C.C. pipe 900 mm dia. R.C.C. pipe 1000 mm dia. R.C.C. pipe 1100 mm dia. R.C.C. pipe metre metre metre metre metre metre metre metre metre metre metre metre 173.95 202.85 258.20 338.75 499.55 584.85 895.10 1,000.90 1,167.40 1,413.90 1,740.95 2,093.70
316
Code No
Description
Unit
Rate Rs. 2,208.30
19.6.13 19.7
1200 mm dia. R.C.C. pipe
metre
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design : 19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With F.P.S. bricks with class designation 75 With Sewer bricks conforming to IS : 4885 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : With F.P.S. bricks class designation 75 With Sewer bricks conforming to IS : 4885 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) : With F.P.S. bricks class designation 75 With Sewer bricks conforming to IS : 4885 each each 15,673.85 16,278.10 each each 11,882.20 12,584.65 each each 5,383.70 5,640.50
19.7.1.1 19.7.1.2 19.7.2
19.7.2.1 19.7.2.2 19.7.3
19.7.3.1 19.7.3.2 19.8
Extra for depth for manholes 19.8.1 19.8.1.1 19.8.1.2 19.8.2 19.8.2.1 19.8.2.2 Size 90x80 cm With F.P.S. bricks class designation 75 With Sewer bricks conforming to IS : 4885 Size 120x90 cm With F.P.S. bricks class designation 75 With Sewer bricks conforming to IS : 4885 metre metre 3,179.95 4,071.30 metre metre 2,654.00 3,401.80
19.9
Constructing brick masonry circular type manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6
317
Code No
Description
Unit
Rate Rs.
graded stone aggregate 40mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design : 19.9.1 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : With F.P.S. bricks class designation 75 With Sewer bricks conforming to IS : 4885 each each 4,933.50 5,347.90
19.9.1.1 19.9.1.2 19.10
Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91m to 1.67m 19.10.1 19.10.2 With F.P.S. bricks class designation 75 With Sewer bricks conforming IS : 4885 metre metre 2289.75 2915.90
19.11
Constructing brick masonry circular manhole 1.22m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design : 19.11.1 1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including centering shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : With F.P.S. bricks class designation 75 With Sewer bricks conforming IS : 4885 each each 8,946.25 9,934.70
19.11.1.1 19.11.1.2 19.12
Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68 m to 2.29 m : 19.12.1 19.12.2 With F.P.S. bricks class designation 75 With Sewer bricks conforming IS : 4885 metre metre 2954.75 3772.05
318
Code No 19.13
Description
Unit
Rate Rs.
Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design : 19.13.1 2.30m deep with SFRC Cover and frame (heavy duty HD20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including centering shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : With F.P.S. bricks class designation 75 With Sewer bricks conforming IS : 4885 each each 18,281.60 21,089.40
19.13.1.1 19.13.1.2 19.14
Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m : 19.14.1 19.14.2 With F.P.S. bricks class designation 75 With Sewer bricks conforming IS : 4885 metre metre 6956.05 9069.45
19.15
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : 19.15.1 19.15.2 With 20x20 mm square bar With 20 mm diameter round bar each each 149.85 125.15
19.16
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. Replacement of M.S. foot rests in manholes including dismantling concrete blocks and fixing with 20x20x10 cm cement concrete blocks
each
182.40
19.17
319
Code No
Description
Unit
Rate Rs.
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) : 19.17.1 19.17.2 19.18 With 20x20 mm square bar With 20 mm diameter round bar each each 167.95 143.20
Supplying and fixing C.I. cover without frame for manholes : 19.18.1 19.18.2 19.18.3 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg. 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg. 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg. each each each 1,007.45 2,507.35 4,293.30
19.19
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality 19.19.1 19.19.1.1 19.19.1.2 19.19.1.3 19.19.2 19.19.2.1 19.19.2.2 19.19.3 19.19.3.1 19.19.4 19.19.4.1 L D- 2.5 Rectangular shape 600x450mm internal dimensions Square shape 450mm internal dimensions Circular shape 450mm internal diameter M D - 10 Square shape 450mm internal dimension Circular shape 500mm internal diameter H D - 20 Circular shape 560 mm internal diameter EHD - 35 Circular shape 560 mm internal dia. each each 1,223.00 205.30 each 1,110.30 each each 825.35 792.75 each each each 883.25 748.50 671.80
19.20 19.21
Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5kg. Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : 19.21.1 19.21.2 19.21.3 For pipes 100 to 230 mm diameter For pipes 250 to 300 mm diameter For pipes 350 to 450 mm diameter
each each each
164.30 205.40 302.95
19.22
Providing sand cast iron drop connection externally for 60 cm drop from branch sewer line to main sewer manhole including inspection and cleaning eye with chain and lid, sand cast iron drop pipe and
320
Code No
Description
Unit
Rate Rs.
bend encased all-round with cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) with all centering and shuttering required, cutting holes in walls and making good with brick work in cement mortar 1:4 (1 cement : 4 coarse sand) plastered with cement mortar 1:3 (1 cement : 3 coarse sand) on inside of the manhole wall lead caulked joints between sand cast iron pipes and fittings, stiff cement mortar 1:1 (1 cement : 1 fine sand) joints between sand cast iron tee and S.W. pipe, making required channels complete as per standard design and specifications : 19.22.1 19.22.2 19.23 100 mm dia. sand cast iron drop connection 150 mm dia. sand cast iron drop connection each each 2,978.05 4,530.90
Extra for depths beyond 60 cm of sand cast iron drop connection complete : 19.23.1 19.23.2 For 100 mm dia. sand cast iron drop connection For 150 mm dia. sand cast iron drop connection metre metre 1,004.65 1,504.90
19.24
Dismantling of manhole including R.C.C. top slab, C.I. cover with frame including stacking of useful materials near the site and disposal of unserviceable materials into municipal dumps within 50 m lead : 19.24.1 19.24.2 19.24.3 19.24.4 Rectangular manhole 90x80 cm and 45 cm deep Rectangular manhole 120x90 cm and 90 cm deep Rectangular arch type manhole 140x90cm and 2.45m deep Circular manhole 122 cm diameter and 1.68 m deep each each each each 388.75 680.85 1,288.10 988.45
19.25
Extra for depth of manholes dismantled: 19.25.1 19.25.2 19.25.3 19.25.4 Rectangular manhole 90x80 cm and 45 cm deep Rectangular manhole 120x90 cm and 90 cm deep Rectangular arch type manhole 140x90 cm and 2.45m deep (up to 4.25 m depth). Circular manhole 122 cm diameter and 1.68 m deep (up to 2.29 m depth) metre metre metre metre 309.75 368.80 298.15 522.65
19.26
Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately) : 19.26.1 19.26.2 19.26.3 19.26.4 Rectangular manhole 90x80 cm with rectangular cover 600x450 mm of grade LD - 2.5 Rectangular manhole 120x90 cm with circular cover 500 mm dia of grade MD - 10 Rectangular manhole 120x90 cm with circular cover 560 mm dia of grade HD - 20 Circular manhole 140 cm dia with circular cover 600 mm dia of grade EHD - 35 each each each each 824.25 1,287.45 1,198.10 115.25
321
Code No 19.27
Description
Unit
Rate Rs.
Constructing brick masonry road gully chamber 50x45x60 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : 19.27.1 With F.P.S. bricks each 2,248.35
19.28
Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand ) with pre-cast R.C.C. vertical grating complete as per standard design : 19.28.1 With F.P.S. Bricks each 2,358.00
19.29
Constructing brick masonry road gully chamber 110x50x77.5 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame and vertical grating complete as per standard design : 19.29.1 With F.P.S. bricks each 4,272.30
19.30
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : 19.30.1 19.30.1.1 19.30.2 19.30.2.1 19.30.3 19.30.3.1 Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With F.P.S. bricks Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets : With F.P.S. bricks Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets : With F.P.S. bricks each 4,068.50 each 3,590.95 each 3,146.40
19.31
Extra for depth beyond 45 cm of brick masonry chamber : 19.31.1 19.31.1.1 19.31.2 19.31.2.1 For 455x610 mm size With F.P.S. bricks For 500x700 mm size With F.P.S. bricks metre 2,013.70 metre 1,845.65
322
Code No
Description
Unit
Rate Rs.
19.31.3 19.31.3.1 19.32
For 600x850 mm size With F.P.S. bricks metre 2,345.30
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 19.32.1 With F.P.S. bricks each 9,938.65
19.33
Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 19.34.1 19.34.2 100 mm dia 150 mm dia
each
1,074.90
19.34
each each
198.35 281.55
323
SUB HEAD : 20.0
PILE WORK
325
BASIC RATES (SH: 20.0 PILE WORK)

Code No 0017 0018 0024 0025 0026 0027 0028 0114 0130 7181 7182 7183 7246 Description Unit Rate Rs. 1,030.00 800.00 28,000.00 2,000.00 4,000.00 28,000.00 8,000.00 135.25 151.50 40.00 35.00 2,700.00
Hire and running charges of tipper Hire and running charges of loader. Hire and running charges of hydraulic piling rig with power unit etc. including complete accessories and shifting at site. Hire and running charges of light crane. Hire and running charges of bentonite pump. Hire and running charges of vibrating pile driving hammer complete with power unit and accessories . Hire and running charges of crane 20 tonne capacity. Beldar Mistry C.I. pile shoe M.S. clamps for pile shoe Bentonite Vertical load testing (INITIAL) of piles in accordance with IS : 2911 (Part-IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification and up to 50MT capacity pile. Vertical load testing (INITIAL) of piles in accordance with IS : 2911 (Part-IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & above 50MT and up to 100MT. Vertical load testing (INITIAL) of piles in accordance with IS : 2911 (Part-IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & group of two or more up to 50MT. Cyclic vertical load testing of piles in accordance with IS : 2911 (PartIV) including preparation of pile head etc. for Single pile up to 50 tonne capacity Cyclic vertical load testing of piles in accordance with IS : 2911 (PartIV) including preparation of pile head etc. for Single pile above 50 tonne capacity pile and up to 100 tonne capacity pile Cyclic vertical load testing of piles in accordance with IS : 2911 (PartIV) including preparation of pile head etc. for Group of two piles upto 50 tonne capacity each Lateral load testing of single pile in accordance with IS : 2911 part -IV for determining safe allowable lateral load on pile. Up to 50 tonne capacity
Day Day per day per day per day per day per day Day Day kilogram kilogram tonne
per test
19,500.00
7247
per test
27,500.00
7248
per test
37,500.00
7249
per test
11,500.00
7250
per test
18,000.00
7251
per test
23,000.00
7252
per test
11,500.00
SUB HEAD 20.0 PILE WORK
327
Code No 7253
Description Lateral load testing of single pile in accordance with IS : 2911 part -IV for determining safe allowable lateral load on pile. Above 50 tonne capacity Sundries
Unit
Rate Rs.
per test L.S.
18,000.00 1.00
9999
SUB HEAD 20.0 PILE WORK
328
20.0 PILE WORK

Providing, driving and installing driven cast-in-situ reinforced cement concrete piles of specified diameter and length below the pile cap M 35 in cement concrete, to carry safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of shoe and the length of pile to be embedded in the pile cap etc. all complete. (Length of pile for payment shall be measured from top of shoe to the bottom of pile cap) : 20.1.1 20.1.2 20.1.3 20.1.4 20.1.5 20.1.6 20.1.7 20.1.8 400 mm dia piles 450 mm dia piles 500 mm dia piles 550 mm dia piles 750 mm dia piles. 1000 mm dia piles. 1200 mm dia piles. 1500 mm dia piles. metre metre metre metre metre metre metre metre 1,428.85 1,758.75 2,120.00 2,285.95 3,826.05 6,242.15 7,981.90 11,114.75
20.2
Boring, providing and installing bored cast-in-situ reinforced cement concrete pile of specified diameter and length below the pile cap M 35 in cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with, bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap). 20.2.1 20.2.2 20.2.3 20.2.4 20.2.5 20.2.6 20.2.7 20.2.8 20.2.9 300 mm dia piles 400 mm dia piles 450 mm dia piles 500 mm dia. piles 600 mm dia piles 750 mm dia piles. 1000 mm dia piles. 1200 mm dia piles. 1500 mm dia piles. metre metre metre metre metre metre metre metre metre 1,070.50 1,302.00 1,705.95 2,005.70 2,559.60 3,786.75 6,220.05 7,993.15 11,276.10
20.3
Boring, Providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M 35 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment
SUBHEAD -20.0 PILE WORK
329
Code No
Description
Unit
Rate Rs.
shall be measured upto to the bottom of pile cap) : 20.3.1 20.3.2 20.3.3 20.3.4 20.4 300 mm dia piles. 400 mm dia piles 450 mm dia piles 550 mm dia piles metre metre metre metre 1,623.00 1,933.55 2,118.25 2,332.70
Extra over item No. 23.3 for providing additional bulb in under reamed piles, under specified dia meter (Only the quantity of extra bulbs are to be paid). 20.4.1 20.4.2 20.4.3 20.4.4 300mm dia piles. 400mm dia piles. 450 mm dia piles. 550 mm dia piles. each each each each 1,030.25 1,167.00 1,249.70 1,391.60
20.5
Providing, driving and installing driven Pre-cast reinforced cement concrete piles of specified diameter and length below the pile cap in M 35 cement concrete to carry safe working load not less than specified. With a central through preformed hole with M.S. black pipe of dia, 40mm for grouting with cement sand grouting of mix 1:2 (1 cement : 2 coarse sand) under sufficient positive pressure to ensure complete filling including centring, shuttering, driving and removing the steel casing pipe and lifting casing etc. complete but excluding the cost of steel reinforcement. (Length of pile for payment shall be measured from top of the shoe to the bottom of pile cap). 20.5.1 20.5.2 20.5.3 20.5.4 20.5.5 20.5.6 400 mm dia piles. 450 mm dia piles. 500 mm dia piles. 550 mm dia piles. 750 mm dia piles. 1000 mm dia piles. metre metre metre metre metre metre 1,691.55 1,956.70 2,104.70 2,345.55 4,135.35 5,691.35
20.6
Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer in-charge. 20.6.1 20.6.1.1 20.6.1.2 20.6.2 20.6.2.1 20.6.2.2 20.6.3 Single pile upto 50 tonne capacity Initial test. Routine test Single pile above 50 tonne and upto 100 tonne capacity Initial test Routine test. Group of two or more piles upto 50 tonne capacity per test per test 31,941.20 20,907.00 per test per test 22,649.20 13,357.20
330
Code No
Description
Unit
Rate Rs. 43,556.20 26,714.50
20.6.3.1 20.6.3.2 20.7
Initial test Routine test
per test per test
Cyclic vertical load testing of pile in accordance with IS Code of practice IS: 2911 (part IV) including preparation of pile head etc for. 20.7.1 20.7.1.1 20.7.1.2 20.7.2 20.7.2.1 Single pile. Upto 50 tonne capacity pile. Above 50 tonne and upto 100 tonne capacity pile. Group of two piles. Upto 50 tonne capacity each. per test 26,714.50 per test per test 13,357.20 20,907.00
20.8
Lateral load testing of single pile in accordance with IS Code of practice IS : 2911 (Part IV) for determining safe allowable lateral load on pile : 20.8.1 20.8.2 Upto 50 tonne capacity pile. Above 50 tonne and upto 100 tonne capacity pile. per test per test 13,357.20 20,907.00
331
SUB HEAD : 21.0
ALUMINIUM WORK
333
BASIC RATES (SH: 21.0 ALUMINIUM WORK)

Code No 0100 0111 0112 0114 0116 0123 0124 0139 0589 0689 0992 2406 2407 2704 7001 7019 7048 7306 7313 7347 7348 7388 7389 7390 7391 7392 7393 7394 7395 7396 Description Unit Rate Rs. 138.45 151.50 141.60 135.25 151.50 151.50 141.60 138.45 63.00 416.00 3,450.00 248.00 340.00 195.00 150.00 8.00 7.00 195.00 7.00 23.00 7.00 30.00 32.00 22.00 40.00 45.00 50.00 1,400.00 25.00 1,550.00
Bandhani Carpenter 1st class Carpenter 2nd class Beldar Fitter (grade 1) Mason (brick layer) 1st class Mason (brick layer) 2nd class Skilled Beldar (for floor rubbing etc.) Chromium plated Brass screws 20 mm Anodised Aluminium butt hinges 100x75x4 mm Galvanised steel plain sheets Float glass sheet of nominal thickness 4 mm (weight not less than 10kg/sqm). Float glass sheet of nominal thickness 5.5 mm.(weight not less than 13.50 kg/sqm). Aluminium Strip 40 mm wide and 2 mm thick Brass 100mm mortice latch and lock with6 levers without pair of handles Dash fastener/chemical fastener Rawl plug 50 mm (designation 10 no.) Aluminium T or L sections Expandable fastener with plastic sleeve and M.S. screws. 32 mm long Cadmium plated full threaded steel screws (30x4 mm dia.) Aluminium washer 2 mm thick 15 mm dia Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia bolt Anodising 15 microns on aluminium sections Neoprene/EPDM rubber gasket Anodising 25 microns on aluminium sections Epoxy powder coating 50 microns on aluminium sections. Polyester powder coating 50 microns on aluminium sections Double action hydraulic floor spring with stainless steel cover plate 6 mm dia. G.I. adjustable hangers including clips (up to 1.2 m length) Double action hydraulic floor spring with brass cover plate
Day Day Day Day Day Day Day Day 100 Nos 100 Nos quintal sqm sqm kilogram each each each kilogram each 100 Nos 100 Nos each kilogram metre kilogram kilogram kilogram each each each
SUB HEAD 21.0 ALUMIINIUM WORK
335
Code No 7477
Description Prelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823 (exterior grade)12 mm thick Prelaminated particle board with both sides decorative lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823 (exterior grade)12 mm thick Silicon sealant. Stainless steal screws 30mm x4mm. Hermetically sealed double glazed unit made with 6mm thick clear float glass both side having 12 mm air gap. Stainless steel (SS 304 grade) adjustable friction window stay. 205 x 19mm Stainless steel (SS 304 grade) adjustable friction window stay 255 x 19mm Stainless steel (SS 304 grade) adjustable friction window stay. 355 x 19mm Stainless steel (SS 304 grade) adjustable friction window stay. 510 x 19mm Stainless steel (SS 304 grade) adjustable friction window stay. 710 x 19mm Masking tape. Aluminium casement window fastener (Anodised AC 15 ) Aluminium casement window fastener (powder coated). Aluminium casement window fastener (polyester powder coated). Aluminium round shape handle (anodised AC 15) Aluminium round shape handle (powder coated) Aluminium round shape handle (polyester powder coated). Stainless steel screws 25mm x4mm Sundries
Unit sqm
Rate Rs. 595.00
7480
sqm
625.00
8646 8647 8648 8649 8650 8651 8652 8653 8654 8660 8661 8662 8663 8664 8665 8666 9999
cartridge 100 Nos sqm each each each each each metre each each each each each each 100 Nos L.S.
281.00 25.00 1,980.00 145.60 161.20 208.00 390.00 715.00 1.40 30.00 33.00 35.00 37.00 41.00 43.00 21.00 2.60
SUB HEAD 21.0 ALUMIINIUM WORK
336
21.0 ALUMINIUM WORK

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately) : 21.1.1 21.1.1.1 For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Powder coated aluminium (minimum thickness of powder coating 50 micron) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately). Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Powder coated aluminium (minimum thickness of powder coating 50 micron) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
kg kg kg
290.45 306.30 312.40
21.1.1.2 21.1.1.3 21.1.2
21.1.2.1
kg kg kg
310.45 326.60 332.85
21.1.2.2 21.1.2.3 21.2
Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. 21.2.1 21.2.2 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. Pre-laminated particle board with decorative lamination on both sides. sqm sqm 776.05 812.60
SUBHEAD -21.0 ALUMINIUM WORK
337
Code No 21.3
Description
Unit
Rate Rs.
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-incharge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 21.3.2 21.3.3 With float glass panes of 4.0 mm thickness With float glass panes of 5.50 mm thickness With float glass panes of 8 mm thickness sqm sqm sqm 554.95 673.55 556.00
21.4
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. 21.4.1 21.4.2 With stainless steel cover plate With brass cover plate each each 1,732.65 1,907.70
21.5
Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately). Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length) fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60mm long and expansion hold fasteners 12.5 mm dia. 40mm long complete as per direction of Engineer -incharge. Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving screws, over expansion joints on vertical surfaces/ceilings with full threaded, cadmium plated steel screws 4mm dia. stem, 30mm long and aluminium washers 2mm thick, 15mm dia. at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete. 21.7.1 Anodised aluminium sheet 2.5mm thick (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron)
kg
364.45
21.6
each
71.10
21.7
kg kg
335.85 351.70
21.7.2 21.8
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of
338
Code No
Description
Unit
Rate Rs.
approved quality as per architectural drawings and direction of Engineer-in-charge complete. 21.8.1 21.9 Upto 5mm depth and 5 mm width metre 58.85
Extra for applying additional anodic coating AC 25 instead of AC 15 to aluminium extruded sections. 21.9.1 21.9.2 For fixed portion For shutters of doors, windows & ventilators. kg kg 9.30 9.30
21.10
Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side having 12 mm air gap including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete. Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer-incharge complete. 21.11.1 21.11.2 21.11.3 21.11.4 21.11.5 205 X 19 mm 255 X 19 mm 355 X 19 mm 510 X 19 mm 710 X 19 mm
sqm
2,808.90
21.11
each each each each each
175.10 193.20 247.55 458.95 836.45
21.12
Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. 21.12.1 21.12.2 21.12.3 Anodized (AC 15 ) aluminium tubular handle bar Powder coated minimum thickness 50 micron aluminium tubular handle bar. Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar each each each 433.75 458.45 467.95
21.13
Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC 15) sub frame work for windows and ventilators a with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS : 1285 fixed with rawl plugs and stainless steel screws etc. Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete.
each
208.35
21.14
kg
303.90
21.15
339
Code No
Description
Unit
Rate Rs. 37.20 40.70 43.00
21.15.1 21.15.2 21.15.3 21.16
Anodized (AC 15) aluminium Powder coated minimum thickness 50 micron aluminium. Polyester powder coated minimum thickness 50 micron aluminium.
each each each
Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-incharge 21.16.1 21.16.2 21.16.3 Anodized (AC 15 ) aluminium Powder coated minimum thickness 50 micron aluminium Polyester powder coated minimum thickness 50 micron aluminium. each each each 45.30 49.95 52.30
340
SUB HEAD : 22.0
WATER PROOFING
341
BASIC RATES (22.0 WATER PROOFING)

Code No 0002 0012 0101 0114 0115 0123 0124 0125 0128 0130 0131 0155 0159 0285 0295 0296 0297 0313 0316 0318 0322 0367 0370 0982 1169 1177 1213 1241 2200 2202 2203 2209 Description Unit Rate Rs. 400.00 200.00 138.45 135.25 135.25 151.50 141.60 141.60 138.45 151.50 141.60 146.55 151.50 350.00 700.00 700.00 700.00 25,000.00 28.00 45.00 45.00 4,500.00 300.00 600.00 150.00 717.00 20.00 35.00 60.81 53.21 53.21 47.29
Hire charges of Concrete Mixer 0.14 cubic metre Vibrator(Needle type 40mm) Bhisti Beldar Coolie Mason (brick layer) 1st class Mason (brick layer) 2nd class Mason (for plain stone work) 2nd class) Mate Mistry Painter Mason (average) Skilled torch operator for laying tack Brick Aggregate (Single size) : 63 mm nominal size Stone Aggregate (Single size) : 20 mm nominal size Stone Aggregate (Single size) : 12.5 mm nominal size Stone Aggregate (Single size) : 10 mm nominal size Blown type petroleum bitumen of penetration 85/25 of approved quality Bitumen solution primer of approved quality Bitumen felt fibre base (vegetable or animal):Type 2 grade 1 Bitumen felt :Type 3 grade 1 Portland Cement Coal (steam) Coarse sand (zone III) Kota stone slab 25mm thick (rough chiseled) Stone grit 6 mm and down size or pea sized gravel Water proofing materials Commercial LPG in cylinder. Carriage of steam coal Carriage of Stone aggregate below 40 mm nominal size Carriage of Coarse sand Carriage of Cement
Day Day Day Day Day Day Day Day Day Day Day Day Day cum cum cum cum tonne litre sqm sqm tonne quintal cum Sq.m. cum kilogram kg tonne cum cum tonne
SUB HEAD 23.0 WATER PROOFING
343
Code No 2211 2216 2260 3002 7233 7427 7428 7429 8200 8201 8203 8204 8205 8206 8207 8501 8502 9999
Description Carriage of Tar bitumen Carriage of Stone blocks white & red sand stone & kota stone slab Carriage of Brick aggregate Polyvinyl chloride sheet 400 micron thick Fibre glass tissue reinforcement Type II Grade I Water stops Serrated with central bulb (225 mm wide, 8-11 mm thick) Water stops Dumb bell with central bulb Kickers A.P.P. modified polymeric felt (two layers) 1.5 mm thick A.P.P. modified polymeric felt (two layers) 2 mm thick A.P.P. modified 2 mm thick membrane reinforced with glass fibre matt A.P.P. modified 3 mm thick membrane reinforced with glass fibre matt A.P.P. modified 3 mm thick membrane reinforced with polyester matt Bitumen primer for bitumen membrane Geotextile 120 gsm membrane Polymer modified cementation coating Fibre glass cloth Sundries
Unit tonne tonne cum sqm sqm metre metre metre sqm sqm sqm sqm sqm litre sqm kilogram sqm L.S.
Rate Rs. 53.21 47.29 57.83 26.00 55.00 330.00 306.00 325.00 50.00 85.00 147.00 185.00 221.00 54.00 25.00 114.00 33.00 1.00
SUB HEAD 23.0 WATER PROOFING
344
22.0 WATER PROOFING

Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge and consisting of : i) Ist layer of 22mm to 25mm thick approved and specified rough stone slab over a 25mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. ii) 2nd layer of 25mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions. iii) Finishing top with stone aggregate of 10mm to 12mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer. 22.1.1 Using rough kota stone. sqm 540.30
22.2
Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge : 22.2.1 Using rough Kota stone sqm 647.85
22.3
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : i) Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.
ii) IInd course of 20mm cement plaster 1:3 (1 cement : 3 coarse
iii) IIIrd course of applying blown or residual bitumen applied hot at

1.7 Kg. per sqm of area.
iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of
PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.) sqm 272.50
SUBHEAD -22.0 WATER PROOFING
345
Code No 22.4
Description
Unit
Rate Rs.
Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete : 22.4.1 22.4.2 22.4.3 Serrated with central bulb (225mm wide, 8-11mm thick). Dumb bell with central bulb (180mm wide, 8mm thick). Kickers (320mm wide, 5mm thick). metre metre metre 386.75 358.85 380.95
22.5
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately For the purpose of measurement the entire treated surface will be measured. Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the
sqm
143.85
22.6
sqm
237.50
22.7
346
Code No
Description
Unit
Rate Rs.
adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : 22.7.1 22.8 With average thickness of 120mm and minimum thickness at khurra as 65 mm. sqm 541.50
Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6mm and down size or pea-sized gravel spread at 6 cubic diameter per square metre including preparation of surface but excluding grading complete with : 22.8.1 Bitumen felt (hessian base) type 3 grade I conforming to IS : 1322. sqm 184.80
22.9
Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth course of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45, 1.20 and 1.45 Kg per square metre of area respectively, second and fourth courses of roofing felt type 3 grade I conforming to IS : 1322 (Hessian based self finished bitumen felt) conforming to IS : 1322 and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface but excluding grading, complete. Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blown or / and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade I (fibre base self finished bitumen felt) six and final courses of stone grit 6mm and down size or pea sized gravel spread at 6cu.dm per sqm including preparation of surface, excluding grading, compete. Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blow or/ and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of
sqm
292.75
22.10
sqm
315.35
22.11
sqm
315.35
347
Code No
Description
Unit
Rate Rs.
roofing felt type 2 grade II (glass fibre base self finished bitumen felt) and sixth and final course of stone grit 6mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface but excluding grading, complete. 22.12 22.13 Supplying and applying bituminous solution primer on roof and or wall surface at 0.24 litre per sqm. Deduct for omitting in water proofing treatment final course of spreading stone grit 6mm down size or pea sized gravel : 22.13.1 22.13.2 22.14 At 6 cudm per sqm. at 8 cudm per sqm. sqm sqm 8.65 11.05 sqm 15.00
Grading roof for water proofing treatment with 22.14.1 22.14.2 22.14.3 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Cement mortar 1:3 (1 cement : 3 coarse sand) Cement mortar 1:4 (1cement : 4 coarse sand) cum cum cum 3,314.95 5,045.35 4,357.65
22.15
Providing and laying in situ seven course water proofing treatment with APP (Atactic poly-propylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of class designation 100 grouted with cement mortar 1:3 (1cement:3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat which shall be paid for separately as per DSR item No. 12.19. Providing and laying in situ five course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, 2nd & 4th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. 5th, the top most layer shall be finished with brick tiles of class designation 100 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat which shall be paid for separately as per DSR item No. 12.19.
sqm
283.25
22.16
sqm
221.15
348
Code No 22.17
Description
Unit
Rate Rs.
Providing and laying in situ seven course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of class designation 100 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 ( 1 cement : 3 fine sand) and finished neat which shall be paid for separately as per DSR item No. 12.19. Providing and fixing APP (Atactic Polypropylene Polymer) modified prefabricated five layer 2mm thick water proofing membrance, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sq. mtr. by the same membrance manufacture of density at 25C, 0.87 - 0.89 kg/ ltr and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using Butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23C as 350/300 N/ 5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150C. Cold flexibility shall be upto -2C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacture of membrane. 22.18.1 2mm (for corrugated roof sheets)
sqm
372.70
22.18
sqm
256.25
22.19
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sqm. by the same membrane manufactured of density at 25C, 0.87 - 0.89 kg/ltr and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23C as 350/300 N/5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150C. Cold flexibility shall be upto 2C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 22.19.1 3 mm thick sqm 304.80
349
Code No 22.20
Description
Unit
Rate Rs.
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sqm. by the same membrane manufacture of density at 25C, 0.87-0.89 kg/ltr and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150C. Cold flexibility shall be upto -2C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 22.20.1 3 mm thick sqm 350.80
22.21
Extra for covering top of membrane with Geotextile, 120gsm non woven, 100% polyester of thickness 1 to 1.25mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation [for Item No. 25.19 to 25.21].
sqm
38.75
350
SUB HEAD : 23.0
HORTICULTURE AND LAND SCAPING
351
BASIC RATES (SH: 23.0 HORTICULTURE & LANDSCAPING)

Code No 0103 0114 0115 0124 0979 0980 1008 2201 2205 2241 2242 2317 2602 2603 9999 Description Unit Rate Rs. 141.60 135.25 135.25 141.60 11.00 60.00 2,900.00 141.88 47.29 66.51 57.83 57.83 1,900.00 1,700.00 1.00
Blacksmith 2nd class Beldar Coolie Mason (brick layer) 2nd class Royalty for good earth Royalty for sludge Flats up to 10 mm in thickness Carriage of Bricks Carriage of Steel Carriage of Good earth Carriage of Dump manure Carriage of Sludge F.P.S. bricks class designation75 F.P.S. bricks class designation50 Sundries
Day Day Day Day cum cum quintal 1000 Nos tonne cum cum cum 1000 Nos 1000 Nos L.S.
SUB HEAD 23.0 HORTICULTURE & LANDSCAPING
353
23.0 HORTICULTURE & LANDSCAPING

Trenching in ordinary soil up to a depth of 60cm including removal and stacking of serviceable materials and then disposing of by spreading and neatly levelling with in a lead of 50m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). Supplying and stacking of good earth at site including royalty and carriage up to 1 km (earth measured in stacks will be reduced by 20% for payment). Supplying and stacking sludge at site including royalty and carriage up to 1 km (sludge measured in stacks will be reduced by 8% for payment). Supplying and stacking at site dump manure from approved source, including carriage up to 1 km (manure measured in stacks will be reduced by 8% for payment) : 23.4.1 23.4.2 23.4.3 Screened through sieve of I.S. designation 20mm Screened through sieve of I.S. designation 16mm Screened through sieve of I.S. designation 4.75mm
cum
16.95
23.2
cum
144.05
23.3
cum
136.85
23.4
cum cum cum 100sqm 100sqm 100sqm
82.90 90.75 97.05 33.05 106.85 80.20
23.5 23.6 23.7 23.8
Rough dressing the trenched ground including breaking clods. Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation. Fine dressing the ground Spreading of sludge, dump manure or/and good earth in required thickness (Cost of sludge, dump manure or/ and good earth to be paid separately). Mixing earth and sludge or manure in proportion specified or directed. Grassing with Doob grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for mowing including supplying good earth if needed (the good earth shall be paid for separately). 23.10.1 23.10.2 23.10.3 In rows 15 cm apart in either direction. In rows 7.5 cm apart in either direction. In rows 5 cm apart in either direction.
cum cum
11.60 7.85
23.9 23.10
100sqm 100sqm 100sqm
121.00 251.25 384.85
23.11
Renovating lawns including weeding, cheeling the grass, forking the ground, top dressing with sludge or manure, mixing the same with forked soil, watering and maintaining the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for mowing and disposal of rubbish as directed, including supplying good earth if needed but excluding the cost of sludge or manure (the good earth
100sqm
741.50
SUBHEAD -23.0 HORTICULTURE
354
Code No
Description
Unit
Rate Rs.
shall be paid for separately). 23.12 Uprooting rank vegetation and weeds by digging the area to a depth of 60cm removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts. Preparation of beds for hedging and shrubbery by excavating 60cm deep and trenching the excavated base to a further depth of 30cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50m lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately). Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) : 23.14.1 23.14.2 23.15 Holes 1.2 m dia and 1.2 m deep. Holes 60 cm dia, and 60 cm deep. each each 146.65 19.25
100sqm
1,318.20
23.13
cum
47.90
23.14
Half brick circular tree guard in 50 class designation bricks, internal diameter 1.25 metre and height 1.2 metre above ground and 0.20 m below ground bottom two courses laid dry and top three courses in cement mortar 1:6 (1 cement : 6 fine sand) and the intermediate courses being in dry honey comb masonry as per design complete: 23.15.1 With F.P.S. Bricks each 595.70
23.16
Providing and fixing M.S. flat iron tree guard 60cm dia. and 2m height above ground level formed of 4 nos. 25x6mm and 8 nos. 25x3mm vertical M.S. flats rivetted to 3 nos. 25x6mm M.S. flat iron rings in two halves, bolted together with 8mm dia. and 30mm long bolts including painting two coats with paint of approved brand and manufacture over a coat of priming, complete in all respects. Making tree guard 53 cm dia. and 1.3 m high as per design from empty coal tar drums supplied free by the department including providing and fixing 2 nos. M.S. sheet rings 50 x 0.5 mm with rivets complete in all respects including painting inside and outside of tree guard with : 23.17.1 A coat of coal tar.
each
1,595.85
23.17
each
115.65
355
Code No
Description
Unit
Rate Rs.
23.17.2 23.18
Two or more coats of synthetic enamel paint of approved quality shade over a priming coat.
each
187.70
Making tree guard 53 cm dia. and 2 m high as per design from empty coal tar drums supplied free by the department including providing and fixing four legs 40 cm long of 30 x 3 mm M.S. flat riveted to tree guard and providing and fixing 2 nos. M.S. sheet rings 50 x 0.5 mm with rivets complete in all respects including painting inside and outside of tree guard with : 23.18.1 23.18.2 A coat of coal tar. Two or more coats of synthetic enamel paint of approved quality and shade over a priming coat. each each 238.10 342.15
23.19
Edging with bricks laid dry length wise including excavation, refilling, consolidating with hand packing and spreading neatly surplus earth within a lead of 50 m : 23.19.1 23.19.1.1 23.19.2 23.19.2.1 75 class designation. F.P.S. Bricks 50 class designation. F.P.S. bricks. metre 13.85 metre 15.05
23.20
Filling mixture of earth and sludge or manure in the desired proportion in trenches, flooding with water and leveling (cost of supplying earth and sludge or manure and mixing excluded). Excavation in dumped stones or malba including stacking of serviceable and unserviceable material separately and disposal of unserviceable material lead up to 50 m and lift up to 1.5 m disposed material to be neatly dressed. Excavation in bajri path including stacking of serviceable and unserviceable material lead up to 50 m and lift up to 1.5 m disposed material to be neatly dressed. Excavation in water bound macadam road including stacking the serviceable and unserviceable material separately and disposal of unserviceable material lead up to 50 m and lift up to 1.5 m disposed material to be neatly dressed. Flooding the ground with water including making kiaries and dismantling the same.
cum
3.95
23.21
cum
109.95
23.22
cum
122.55
23.23
cum 100sqm
150.80 68.40
23.24
356
COEFFICIENTS FOR CEMENT CONSUMPTION
357
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION 3.0 MORTAR

Quantity of cement to be used per unit quantity of work (Quintals)
Code No
Description
Unit
3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15 3.16 3.17
Cement Mortar 1:1 (1 cement : 1 fine sand) Cement mortar 1:2 (1 cement : 2 fine sand). Cement mortar 1:3 (1 cement : 3 fine sand). Cement mortar 1:4 (1 cement : 4 fine sand). Cement mortar 1:5 (1 cement : 5 fine sand). Cement mortar 1:6 (1 cement : 6 fine sand). Cement mortar 1:2 (1 cement : 2 coarse sand). Cement mortar 1:3 (1 cement : 3 coarse sand). Cement mortar 1:4 (1 cement : 4 coarse sand). Cement mortar 1:5 (1 cement : 5 coarse sand). Cement mortar 1:6 (1 cement : 6 coarse sand). Cement mortar 1:2 (1 cement : 2 stone dust). Cement mortar 1:2 (1 cement : 2 marble dust). Cement mortar 1:5 (1 cement : 5 marble dust). White cement mortar 1:2 (1 white cement : 2 marble dust). White cement mortar 1:3 (1 white cement : 3 marble dust). White cement mortar 1:5 (1 white cement : 5 marble dust).
cum cum cum cum cum cum cum cum cum cum cum cum cum cum cum cum cum
10.20 6.80 5.10 3.80 3.10 2.50 6.80 5.10 3.80 3.10 2.50 6.80 6.80 3.10 6.80* 5.10* 3.10*
* denotes the White Cement.
COEFFICIENTS FOR CEMENT CONSUMPTION S.H.:- 3.0 MORTAR
359
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION 4.0 CONCRETE WORK

Code
No
Unit
Description
CEMENT CONCRETE (CAST IN- SITU) 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 4.1.1 4.1.2 4.1.3 4.1.4 4.1.5 4.1.6 4.1.7 4.1.8 4.1.9 4.1.10 4.1.11 4.1.12 1:1:2 (1 Cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size) 1:1:3 (1 Cement : 1 coarse sand : 3 graded stone aggregate 20 mm nominal size). 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size). 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size). 1:3:6 (1 Cement : 3 fine sand : 6 graded stone aggregate 40 mm nominal size). 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). 1:4:8 (1 cement : 4 fine sand : 8 graded stone aggregate 40 mm nominal size) 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) 1:2:3:9 (1 ordinary portland cement : 2 Fly ash : 3 coarse sand : 9 graded stone aggregate 40 mm nominal size). 1:2:4:11 (1 ordinary portland cement : 2 fly ash : 4 coarse sand : 11 graded stone aggregate 40 mm nominal size) cum cum cum cum cum cum cum cum cum cum cum 6.10 4.00 3.20 3.20 2.20 2.20 2.20 1.70 1.70 1.30 1.30
cum
1.70
4.1.13
cum
1.30
4.2
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers,
COEFFICIENTS FOR CEMENT CONSUMPTION S.H.:- 4.0 CONCRETE WORK
360
Code
No
Unit
Description
abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc. upto floor five level, excluding the cost of centring, shuttering and finishing : 4.2.1 4.2.2 4.2.3 4.2.4 4.2.5 4.2.6 4.2.7 4.4 1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size) 1:1:3 (1 cement:1 coarse aggregate 20 mm nominal size). sand:3 graded stone cum cum cum cum cum cum 4,00 3.20 3.20 2.20 2.20 2.20 cum 6.10
1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size). 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size). 1:3:6 (1 cement : 3 fine sand : 6 graded stone aggregate 40 mm nominal size).
Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centring, shuttering and finishing. 4.4.1 4.4.2 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). cum cum 3.20 2.20
CEMENT CONCRETE (PRE-CAST) 4.5 Providing and fixing upto floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc. including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required centring, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 Cement : 3 fine sand) on exposed surfaces complete. 4.5.1 4.5.2 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). cum cum 3.80 2.80
361
Code
No
Unit
Description
4.6
Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand) including the cost of required centring, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 cement : 3 fine sand) on exposed surfaces complete. 4.6.1 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). cum 3.62
4.7
Providing and fixing upto floor five level precast cement concrete solid block including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centring, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 cement : 3 fine sand) on exposed surfaces complete : 4.7.1 4.7.2 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). cum cum 4.13 3.13
4.8
Providing and fixing upto floor five level precast cement concrete hollow block including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centring, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 cement : 3 fine sand) on exposed surfaces complete : 4.8.1 4.8.2 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). cum cum 2.466 2.006
4.9
Precasting and placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe Sleeve 50 mm dia 300 mm long in the Bollard and M.S. Pipes 40 mm dia and 450 mm long with 150x150x6mm M.S. plate welded at bottom and embedded 150mm in cement concrete 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including necessary excavation of size 250x250x450mm deep for the same in bitumen/concrete pavement at specified spacing. DAMP- PROOF COURSE
each
0.097
4.10
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size).
sqm
0.13
362
Code
No
Unit
Description
4.11
Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). MISCELLANEOUS
sqm
0.16
4.17
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth
sqm
0.11
363
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION 5.0 REINFORCED CEMENT CONCRETE

Code No
Description
Unit
CAST-IN-SITU 5.1 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work up to plinth level : 5.1.1 5.1.2 5.1.3 5.2 1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size). 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cum cum cum 6.10 4.00 3.20
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centring, shuttering, finishing and reinforcement : 5.2.1 5.2.2 5.2.3 1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). cum cum cum 6.10 4.00 3.20
5.3
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). Providing and laying up to floor five level reinforced cement concrete in kerbs, steps and the like excluding the cost of centring, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). Reinforced cement concrete work in arches, archribs, domes, vaults, shells, folded plate and roofs having slope more than 15 up to floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
cum
3.20
5.4
cum
3.20
5.5
cum
3.20
COEFFICIENTS FOR CEMENT CONSUMPTION S.H. -5.0 REINFORCED CEMENT CONCRETE
364
Code No
Description
Unit
5.6
Reinforced cement concrete work in chimneys, shafts, up to floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). Reinforced cement concrete work in well-steining excluding the cost of centring, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards up to floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:1:3 (1 cement : 1 coarse sand : 3 graded stone aggregate 20mm nominal size). PRE CAST R.C.C.
cum
3.20
5.7
cum
3.20
5.8
cum
4.00
5.12
Providing, hoisting and fixing up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like including the cost of required centring, shuttering, finishing smooth with 6 mm thick cement plaster 1:3 (1 cement: 3 fine sand) on exposed surfaces complete but excluding cost of reinforcement with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size). Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in small lintels not exceeding 1.5m clear span up to floor five level including the cost of required centring, shuttering and finishing smooth with 6 mm thick cement plaster 1:3 (1 cement: 3 fine sand) on exposed surfaces but excluding the cost of reinforcement with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size). Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in mouldings as in cornices, windows sills etc. including setting in cement mortar 1:3 (1 cement : 3 coarse sand) cost of required centring, shuttering and finishing smooth with 6 mm thick cement plaster 1:3 (1 cement : 3 fine sand) on exposed surfaces complete but excluding the cost of reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in lintels, beams and bressumers including setting in cement mortar 1:3 (1 cement: 3 coarse sand), cost of required centring and shuttering and finishing smooth with 6 mm thick cement plaster 1:3 (1 cement: 3 fine sand) on exposed surfaces but excluding the cost of
cum
3.80
5.13
cum
3.77
5.14
cum
3.80
5.15
cum
3.49
365
Code No
Description
Unit
reinforcement with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size). 5.16 Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in shelves including setting in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centring, shuttering and finishing with neat cement punning on exposed surfaces but excluding the cost of reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size). Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in vertical & horizontal fins individually or forming box louvers setting in cement mortar 1:2 (1 cement : 2 coarse sand) including the cost of required centring, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 cement : 3 fine sand) on exposed surfaces complete but excluding the cost of reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete excluding plastering of the jambs, sills and soffits. 5.18.1 5.18.2 5.18.3 50 mm thick 40 mm thick 25 mm thick sqm sqm sqm 1.64* 1.64* 1.64*
cum
3.80
5.17
cum
4.73
5.18
* Cement for fixing only. ENCASING ROLLED STEEL SECTION 5.19 Encasing rolled steel sections, in beams and columns, with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 12.5mm nominal size) including centring and shuttering complete but excluding cost of reinforcement. Encasing rolled steel section in grillages with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) including centring and shuttering but excluding cost of expanded metal and hangers. MISCELLANEOUS 5.23 Deduct for omitting in R.C.C. work smooth finishing of the exposed surface with 6mm thick cement mortar 1:3 (1 Cement : 3 fine sand)
cum
3.20
5.20
cum
3.20
100 sqm
3.67
366
Code No
Description
Unit
5.24
Extra for rendering smooth the top of suspended floors, landings and staircases (treads and risers) with cement mortar 1:2 (1 cement : 2 coarse sand) including a floating coat of neat cement and protecting the surface with a layer of 7.5 cm of earth laid over 15 mm of fine sand in case of suspended floor and bricks laid in mud mortar in case of landings and steps including subsequent removal and cleaning of the same. Providing and filling in position bitumen mix filler of Proportion 80 kg. of hot bitumen, 1 kg. of cement and 0.25 cubic metre of coarse sand for expansion joints. DESIGN MIX CONCRETE
100sqm per cm depth per cm width per 100m
4.17
5.27
0.00032
5.33
Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to site of laying but excluding the cost of centring, shuttering, finishing and reinforcement. including Admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. M-25 grade reinforced cement concrete by using 410kg. of cement per cum of concrete. All work up to floor V level. Add or deduct for providing richer or leaner mixes respectively at all floor levels. 5.34.1 Providing M-30 grade concrete by using 420kg of cement per cum of concerete instead of M-25 grade B.M.C/ R.M.C.. Providing M-35 grade concrete by using 428kg of cement per cum of concerete instead of M-25 grade B.M.C./ R.M.C... Providing M-40 grade concrete by using 435kg of cement per cum of concrete instead of M-25 grade B.M.C./ R.M.C..
cum
4.10*
5.34
cum
0.10*
5.34.2
cum
0.18*
5.34.3
cum
0.25*
5.36
Providing and placing in position precast reinforced cement concrete waffle units square or rectangular as per design and shape for floors and roofs in 1:1:3 (1 Cement : 1 coarse sand : 3 graded stone aggregate 10mm nominal size) including flush or deep ruled pointing at joints in Cement mortar 1:2 (1 Cement : 2 Fine sand), making necessary holes of required sizes for carrying through service lines etc., providing steel hooks for lifting etc, form work in precasting, handling, hoisting, centering and erection complete for all floor levels but excluding
cum
4.16*
367
Code No
Description
Unit
the cost of reinforcement. 5.37 Providing and laying in position ready mixed concrete manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead up to 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. M-25 grade Reinforced cement concrete by using 410kg of cement per cum of concrete. All works up to floor V level.
cum
4.10*
* Actual weight for design mix will be worked out taking into consideration the cement requirement as per particular mix design.
368
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION 6.0 BRICK WORK

Code No
Description
Unit
6.1
Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in: 6.1.1 6.1.2 Cement mortar 1:4 (1 cement : 4 coarse sand) Cement mortar 1:6 (1 cement : 6 coarse sand) cum cum 0.95 0.625
6.2
Brick work with modular bricks of class designation 75 in foundation and plinth in: 6.2.1 6.2.2 Cement mortar 1:4 (1 cement : 4 coarse sand) Cement Mortar 1:6 (1 cement : 6 coarse sand). cum cum 0.95 0.625
6.3
Brick work with machine moulded perforated bricks of class designation 125 conforming to IS: 2222 -1991 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) : 6.3.1 6.3.2 With F.P.S. bricks. With Modular bricks. cum cum 0..625 0.625
6.4
Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level in all shapes and sizes in : 6.4.1 6.4.2 Cement mortar 1:4 (1 cement : 4 coarse sand) Cement mortar 1:6 (1 cement : 6 coarse sand) cum cum 0.95 0.625
6.7
Providing half brick masonry with F.P.S. bricks of class designation 75 in cement mortar 1:3 (1 Cement : 3 coarse sand) in superstructure for closing cavity 5 to 7.5 cm wide in cavity wall complete with 10 cm / 11.4 cm wide bitumen felt type 3 grade 1. Brick work 7 cm thick with F.P.S. brick of class designation 75 in cement mortar 1:3 (1 cement : 3 coarse sand) in superstructure. Brick work in plain arches in superstructure including centering and shuttering complete for span up to 6 metres with F.P.S. brick of class designation 75 in cement mortar 1:3 (1 cement : 3 coarse sand). Brick work in gauged arches in superstructure in cement mortar 1:3 (1 cement : 3 coarse sand) including centering and shuttering complete, for span up to 6 meters with F.P.S. brick of class designation 75. HALF BRICK MASONRY
100 metre 100 sqm
3.86 9.23
6.8 6.9
cum
1.28
6.10
cum
1.28
COEFFICIENTS FOR CEMENT CONSUMPTION S.H. -6.0 BRICK WORK
369
Code No
Description
Unit
6.12
Half brick masonry with F.P.S. brick of class designation 75 in foundations and plinth in. 6.12.1 6.12.2 Cement mortar 1:3 (1 cement : 3 coarse sand) cement mortar 1:4 (1 cement : 4 coarse sand) 100 sqm 100 sqm 14.28 10.64
6.13
Half brick masonry with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level. 6.13.1 6.13.2 Cement mortar 1:3 (1 cement :3 coarse sand) Cement mortar 1:4 (1 cement :4 coarse sand) 100 sqm 100 sqm 14.28 10.64
BRICK TILE WORK 6.16 Tile brick masonry with tile bricks of class designation 100 in foundation and plinth in: 6.16.1 6.16.2 6.17 Cement mortar 1:4 (1 cement : 4 coarse sand) Cement mortar 1:6 (1 cement : 6 coarse sand). cum cum 1.52 1.00
Tile brick masonry with machine moulded tile bricks of class designation 125 conforming to IS : 2690 (Part I) - 1993 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand). Tile brick masonry with tile brick of class designation 100 in superstructure above Plinth level up to floor V level. Tile brick masonry with tile bricks of class designation 100 in plain arch work in superstructure in cement mortar 1:4 (1 cement : 4 coarse sand) including centering and shuttering complete. Tile brick masonry with tile bricks of class designation 100 in gauged arch work in superstructure in cement mortar 1:4 (1 cement : 4 coarse sand) including centring and shuttering complete. Tile brick masonry work 5 cm thick with tile bricks of class designation 100 in cement mortar 1:3 (1 cement : 3 coarse sand) in superstructure. HONEY COMB WORK
cum cum
1.00 1.00
6.18 6.20
cum
1.33
6.21
cum
1.33
6.22
100 sqm
7.65
6.23
Honey-comb brick work 10/11.4 cm thick with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand). EXPOSED BRICK WORK
100 sqm
6.56
6.26
Brick work with selected F.P.S. bricks of class designation 75 in exposed brick work including making horizontal and vertical grooves 10mm wide 12mm deep complete from ground level up to plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) Brick work with modular bricks of class designation 75 in
cum cum
0.625 0.55
6.27
370
Code No
Description
Unit
exposed brick work including making horizontal and vertical grooves 10mm wide 12mm deep complete from ground level up to plinth level in cement mortar 1:6 (1 cement : 6 coarse sand). 6.28 Brick work with machine moulded modular bricks of class designation 125 in exposed brick work including making horizontal and vertical grooves 10mm wide 12mm deep complete from ground level up to plinth level in cement mortar 1:6 (1 cement : 6 coarse sand). Brick work with machine moudled F.P.S. bricks of class designation 125 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12mm deep complete from ground level up to plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) Brick work with machine moudled perforated F.P.S. bricks of class designation 125 conforming IS : 2222-1991 in exposed brick work including making horizontal and vertical grooves 10mm wide 12 mm deep complete from ground level up to plinth level in cement mortar 1:6 (1 cement : 6 coarse sand). Brick work with machine moulded perforated modular bricks of class designation 125 conforming to IS : 2222 -1991 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12mm deep complete from ground level up to plinth level in cement mortar 1:6 (1 cement : 6 coarse sand). Brick work with clay flyash F.P.S. brick of class designation 75 in superstructure above plinth level up to floor five level in : 6.32.1 6.32.2 6.34 Cement mortar 1:4 (1 cement : 4 coarse sand) Cement mortar 1:6 (1 cement : 6 coarse sand) cum cum 0.95 0.625
cum
0.55
6.29
cum
0.625
6.30
cum
0.625
6.31
cum
0.55
6.32
Brick work with modular fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, class designation 100 average compressive strength in super structure above plinth level up to floor V level in : 6.34.1 6.34.2 Cement mortar 1:4 (1 cement : 4 coarse sand) Cement mortar 1:6 (1 cement : 6 Coarse sand) cum cum 0.836 0..55
6.35
Brick work with modular calcium silicate bricks machine moulded conforming to IS:4139-1989, class designation 100 average compressive strength in super structure above plinth level up to floor V level in : 6.35.1 6.35.3 Cement mortar 1:4 (1 cement : 4 coarse sand) Cement mortar 1:6 (1 cement : 6 Coarse sand) cum cum 0.836 0.55
6.36
Brick work with modular extruded burnt fly ash clay sewer bricks
371
Code No
Description
Unit
(Conforming to IS: 4885 - 1988) in foundation and plinth : 6.36.1 6.37 Cement Mortar 1:4 ( 1 cement : 4 coarse sand) cum 0.836
Brick work with modular extruded burnt fly ash clay sewer bricks (conforming to IS : 4885-1988) in arches in foundation and plinth in cement mortar 1:3 ( 1 cement : 3 fine sand). Providing and laying autoclaved aerated cement blocks masonry with 100mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ) The rate includes providing and placing in position 2 Nos. 6 mm dia M.S. bars at every third course of masonry work. Brick work with mechanized autoclaved flyash lime bricks conforming to IS: 12894 :2002 of class designation 100 in superstructure above plinth level up to floor V level in. 6.42.1 6.42.2 Cement mortar 1:4 (1 cement :4 coarse sand) Cement mortar 1:6 (1 cement :6 coarse sand).
cum
1.275
6.38
cum
0.57
6.42
cum cum
0.95 0.625
372
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION 7.0 STONE WORK

Code No Description Unit Quantity of cement to used per unit quantity of work (quintals)
RANDOM RUBBLE MASONRY 7.1 Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with : 7.1.1 Cement mortar 1:6 (1 cement : 6 coarse sand) cum
0.825
COURSED RUBBLE MASONRY 7.6 Coursed rubble masonry (first sort) with hard stone in foundation and plinth with : 7.6.1 7.7 Cement mortar 1:6 (1 cement : 6 coarse sand) cum
0.750
Coursed rubble masonry (second sort) with hard stone in foundation & plinth with : 7.7.1 Cement mortar 1:6 (1 cement : 6 coarse sand) cum
0.750
ASHLAR MASONRY 7.12 Stone work in plain ashlar in super structure upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : 7.12.1 7.12.1.1 7.12.1.2 7.12.2 7.12.2.1 7.12.2.2 7.13 One face dressed. Red sand stone White sand stone Both face dressed. Red sand stone. White sand stone cum cum cum cum
0.54 0.54 0.54 0.54
Stone work plain ashlar in arches in cement mortar 1:3 (1 cement : 3 coarse sand) including centring, shuttering and pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. 7.13.1 7.13.2 Red sand stone White sand stone cum cum
1.07 1.07
COEFFICIENTS FOR CEMENT CONSUMPTION S.H -7.0 STONE WORK
373
Code No
Description
Unit
Quantity of cement to used per unit quantity of work (quintals)
7.14
Stone work plain ashlar in domes in cement mortar 1:3 (1 cement : 3 coarse sand) including centring, shuttering and pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. 7.14.1 7.14.2 Red sand stone White sand stone cum cum
1.07 1.07
7.15
Stone work ashlar punched (ordinary) in superstructure upto floor five level in cement mortar 1:6 (1 white cement : 6 coarse sand) including pointing with cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. 7.15.1 7.15.1.1 7.15.1.2 7.15.2 7.15.2.1 7.15.2.2 Red sand stone. One faced punched. Double faced punched. White sand stone. Single face punched. Double faced punched. cum cum cum cum
0.54 0.54 0.54 0.54
SUNK, MOULDED, CARVED ASHLAR MASONRY 7.20 Stone work sunk or moulded or sunk and moulded upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : 7.20.1 7.20.2 Red sand stone White sand stone cum cum
0.54 0.54
MISCELLANEOUS STONE WORK 7.23 Stone work (machine cut edges) for wall lining etc. (veneer work) backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing by means of cramps which shall be paid for separately) : Red sand stone - exposed face fine dressed with rough backing. 7.23.1.1 70 mm thick. 100sqm
7.23.1
9.18 + 1.56*
374
Code No
Description
Unit
7.23.1.2 7.23.1.3 7.23.1.4 7.23.1.5 7.23.2 7.23.2.1 7.23.2.2 7.23.2.3 7.23.2.4 7.23.2.5 7.23.3 7.23.3.1 7.23.3.2 7.23.3.3 7.23.3.4 7.23.3.5 7.23.4 7.23.4.1 7.23.4.2 7.23.4.3 7.23.4.4 7.23.4.5 7.25
60 mm thick. 50 mm thick. 40 mm thick. 30 mm thick. Red sand stone - Exposed face machine cut and table rubbed with rough backing. 70 mm thick 60 mm thick 50 mm thick 40 mm thick 30 mm thick White sand stone - exposed face fine dressed with rough backing . 70 mm thick. 60 mm thick. 50 mm thick. 40 mm thick. 30 mm thick. White sand stone - Exposed face machine cut and table rubbed with rough backing. 70 mm thick. 60 mm thick. 50 mm thick. 40 mm thick. 30 mm thick.
100sqm 100sqm 100sqm 100sqm
9.18 + 1.56* 9.18 + 1.56* 9.18 + 1.56* 9.18 + 1.56*
100sqm 100sqm 100sqm 100sqm 100sqm
9.18 + 1.56* 9.18 + 1.56* 9.18 + 1.56* 9.18 + 1.56* 9.18 + 1.56*
9.18 + 1.56* 9.18 + 1.56* 9.18 + 1.56* 9.18 + 1.56* 9.18 + 1.56*
9.18 + 1.56* 9.18 + 1.56* 9.18 + 1.56* 9.18 + 1.56* 9.18 + 1.56*
Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand) including making the necessary chases in stone and holes in walls wherever required. Providing and fixing stone dowels 10x5x2.50 cm cut to double wedge shape as per design in cement mortar 1:2 (1 cement : 2 coarse sand) including making the necessary
kg
0.07 0.007
7.26
each
375
Code No
Description
Unit
chases. 7.27 Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand) including making the necessary chases. Providing and fixing sloping chajja of stone 40 mm thick and upto 80 cm wide beyond the wall as measured along the slope in cement mortar 1:4 (1 cement : 4 coarse sand) with 12mm diameter anchoring steel bar 45 cm long fixed in each stone and supported on and including with bricks cove of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand) including pointing in cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade: 7.28.1 7.28.1.1 7.28.2 7.28.2.1 7.29 Red sand stone: With F.P.S Bricks White sand stone: With F.P.S. bricks 100sqm 100sqm
each
0.007
7.28
5.59 5.59
Providing and fixing horizontal chajja of stone 40 mm thick and upto 80 cm projection in cement mortar 1:4 (1 cement : 4 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade: : 7.29.1 7.29.2 Red sand stone White sand stone 100sqm 100sqm
4.94 + 0.03* 4.94 + 0.03*
7.30
30mm red sand stone sun-shade (chisel-dressed) supported on red sand stone brackets, fixed in walls with cement mortar 1:4 (1 cement : 4 coarse sand) including finishing complete. Providing and fixing red sand stone brackets 55x22.5x45cm sunk and moulded including providing and fixing with 4 Nos. gun metal cramp 25x6mm 30 cm long and dowel bars 7.5 cm long 6 mm dia as per design. Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in Cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. 7.32.1 7.32.2 Red sand stone White sand stone
100sqm
2.19
7.31
100nos
3.02
7.32
cum cum
0.54 0.54
376
Code No
Description
Unit
7.36
Wall lining butch work upto 10m height with red/ white sand stone 40 mm thick rough facing on the exposed surface with stone strips of minimum length 300 mm and required width including embedding every tenth layer and bottom most layer in masonry or concrete after making necessary chases of size 75x75mm and by providing layer of 75mm thick strips i/c 12mm thick bed of cement mortar 1:3 (1 Cement : 3 coarse sand) i/c ruled pointing in cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment to match the shade of stone complete as per direction of Engineer-incharge. Stone work ( machine cut edges) for wall lining upto 10 m height etc. (Veneer work) backing filled with a grout of 12mm thick cement mortar 1:3 (1 Cement : 3 coarse sand) and jointed with Cement mortar 1:2 (1 cement : 2 stone dust) including rubbing and polishing complete. (To be secured to the backing by means of cramps which shall be paid for separately) 7.37.1 7.37.1.1 Kota stone slabs exposed face dressed and rubbed. 25 mm thick.
100sqm
15.50 + 1.70*
7.37
100sqm
13.744
7.38
Stone tile work for wall lining upto 10 m height with special adhesive over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement with an admixture of pigment to match the stone shade. 7.38.1 7.38.1.1 7.38.1.2 8mm thick (mirror polished and machine cut edge) Granite stone of any colour and shade. sqm Raj Nagar plain white marble/ Udaipur green marble/ Zebra black marble. sqm
10.44 +1.70* 10.44 +1.70*
STONE WORK IN DRY CLADDING 7.41 Providing and fixing structural steel frame (for dry cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/ rectangular tube in the required pattern as per architectural drawing including cost of cutting, bending, welding etc. The frame work shall be supported in wall with the help of MS brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of size 300x230x300mm
100kg
0.16
377
Code No
Description
Unit
including cost of necessary centring and shuttering and with approved expansion hold fasteners on CC/RCC surface including drilling necessary holes. Approved cramps/ pins etc. shall be welded to the frame work to support stone cladding the steel work will be given a priming coat of Zinc primer as approved by Engineer-in-charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution). The frame work shall be fixed in true horizontal & vertical lines/planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel cramps shall be paid for separately and nothing extra shall be paid.)
* White cement
378
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION 8.0 MARBLE WORK

8.1
Marble work gang saw cut (polished and machine cut) of thickness 18mm for wall lining (veneer work) in cement mortar 1:3 (1 cement : 3 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the backing by means of cramps, which shall be paid for separately). 8.1.1 8.1.1.1 8.1.1.2 Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble. Area of slab upto 0.50 sqm 100sqm Area of slab over 0.50 sqm 100sqm
8.67 + 1.70* 8.67 + 1.70*
8.2
Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels. 8.2.1 8.2.1.1 8.2.1.2 8.2.2 8.2.2.1 8.2.2.2 Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble. Area of slab upto 0.50 sqm. Area of slab over 0.50 sqm. Granite of any colour and shade Area of slab upto 0.50 sqm Area of slab over 0.50 sqm. 100sqm 100sqm 100sqm 100sqm
5.70 5.70 5.70 5.70
8.4
Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete. Providing and fixing cramps of required size & shape in RCC/ CC backing with cement mortar 1:2 ( 1 cement :2 coarse sand) including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately). 8.7.1 Gunmetal cramps.
100metre
1.27
8.7
kg
0.0635
COEFFICIENTS FOR CEMENT CONSUMPTION S.H..: -8.0 MARBLE WORK
379
Code No
Description
Unit
8.7.2 8.9
Stainless steel cramps.
kg
0.0701
Stone tile (polished) work for wall lining over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. 8.9.1 8.9.1.1 8.9.1.2 8mm thick. Raj nagar plain white marble/ Udaipur green marble/ Zebra black marble. Granite of any colour and shade. 100sqm 100sqm
10.44 + 1.90* 10.44 + 1.90*
* White cement
COEFFICIENTS FOR CEMENT CONSUMPTION S.H..: -8.0 MARBLE WORK
380
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION 9.0 WOOD AND P.V.C. WORK
Code No Description Unit
MISCELLANEOUS WOOD WORK 9.32 Providing 50x50x50mm 2nd class teak wood plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement : 3 fine sand) and making good the walls etc. Providing and fixing 2nd class teak wood plain lining tongued and grooved on and including wooden plugs complete with necessary screws and priming coat on unexposed surface. 9.34.1 9.34.2 9.34.3 9.34.4 9.42 40 mm thick. 25 mm thick. 20 mm thick 12 mm thick 100sqm 100sqm 100sqm 100sqm 0.055 0.055 0.055 0.055
100nos
0.01
9.34
Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia ( heavy type ) curtain rod with nickel plated brackets including fixing with 25x3 mm M.S. flat 10 cm long and rawl plugs 50 mm long (designation 10 no.) etc all complete Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS : 14842 - 2000, including top cover of 6 mm coir veneer board, nickle plated M.S. Pipe 20 mm dia (heavy type) curtain rod with nickle plated brackets including fixing with 25x3 mm M.S. Flat 10 cm long and rawl plug 50 mm long (designation 10 No.) etc., all complete Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete : 9.46.1 9.46.2 9.46.3 12 mm dia. 20 mm dia. 25 mm dia.
100metre
0.01
9.43
100metre
0.01
9.46
100metre 100metre 100metre
0.01 0.01 0.01
9.47
Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : 9.47.1 9.47.2 20 mm dia (heavy type) 25 mm dia (heavy type) 100metre 100metre 100nos 0.01 0.01 1.10
9.53
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in
COEFFICIENTS FOR CEMENT CONSUMPTION S.H.: -9.0 WOOD AND PVC WORK
381
Code No
Description
Unit
cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)
COEFFICIENTS FOR CEMENT CONSUMPTION S.H.: -9.0 WOOD AND PVC WORK
382
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION 10.0 STEEL WORK

10.4
Providing and fixing 1mm thick M.S. sheet sliding-shutters with frame and diagonal braces of 40x40x6mm angle iron, 3mm M.S. gusset plates at the junction and corners 25mm dia pulley, 40x40x6mm angle and T-iron guide at the top and bottom respectively including applying a priming coat of approved steel primer. Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. 10.5.1 10.5.2 Using M.S. angels 40x40x6 mm for diagonal braces. Using flats 30x6mm for diagonal braces and central cross piece.
100sqm
0.35
10.5
100sqm 100sqm
0.35 0.35
10.6
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs grade No.2 and M.S. top cover of required thickness for rolling shutters. 10.6.1 10.6.2 10.6.3 80x1.25mm M.S. laths with 1.25 mm thick top cover. 80x1.20 mm M.S. laths with 1.20 mm thick top cover. 80x0.90 mm M.S. laths with 0.90 mm thick top cover. 100sqm 100sqm 100sqm
0.35 0.35 0.35
10.10
Fixing standard steel glazed doors, windows and ventilators in walls with 15x3mm lugs 10 cm long embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including fixing of float glass panes with glazing clips and special metal-sash putty of approved make, or metal beading with screws (only steel windows with lugs, glass panes cut to size and glazing clips or metal beading with screws, shall be supplied by department free of cost.) Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators side /top /centre hung with beading and all members such as K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars
100kg
0.13
10.11
100kg
0.13
COEFFICIENTS FOR CEMENT CONSUMPTION S.H. -10.0 STEEL WORK
383
Code No
Description
Unit
tenoned and riveted with 15x3mm lugs, 10cm long, embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of hinges, pivots, float glass panes with glazing clips and special metal sash putty of approved make and a priming coat of approved steel primer excluding the cost of other fittings except necessary hinges or pivots complete as per approved design Sectional weight of only steel members shall be measured for payment without weight of glass & other fittings. 10.13 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with dash fastener or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with L-Type section made of 1.60mm thick M.S. Sheet, joints mitred and welded and grinded finish with profiles of required size with 15x3mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primers.
100kg
0.11
10.15
100kg
0.28
COEFFICIENTS FOR CEMENT CONSUMPTION S.H. -10.0 STEEL WORK
384
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION 11.0 FLOORING

Quantity of cement to be used per unit quantity of work (Quintals).
Code No
Description
Unit
11.1
Brick on edge flooring with bricks of class designation 75 including cement slurry etc. complete in cement mortar with F.P.S. bricks: 11.1.1 11.1.2 1:4 (1 cement : 4 coarse sand) 1:6 (1cement : 6 coarse sand) sqm sqm 0.1850 0.1285
11.3
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 11.3.1 40mm thick with 20mm nominal size stone aggregate. sqm 0.17
11.4
52 mm thick cement concrete flooring with concrete hardener topping under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume .hardening compound is mixed @ 2 litre per 50kg of cement or as per manufacturers specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. 62 mm thick cement concrete flooring with concrete hardener topping under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6mm nominal size) by volume. Hardening compound is mixed @ 2 litre per 50kg of cement or as per manufactures specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. Cement plaster skirting (upto 30 cm height) with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement. 11.6.1 18 mm thick.
sqm
0.231
11.5
sqm
0.263
11.6
sqm
0.14
11.7
Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete. TERRAZO FLOORING
cum
3.20
11.9
40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 1mm to 4mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by
COEFFICIENTS FOR CEMENT CONSUMPTION S.H.-11.0 FLOORING
385
Code No
Description
Unit
volume including cement slurry etc. complete : 11.9.1 11.9.2 Dark shade pigment with ordinary cement. Light shade pigment with white cement . sqm 11.9.3 Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. sqm 11.9.5 11.9.6 11.10 Light shade pigment with ordinary cement. Ordinary cement without any pigment. sqm sqm sqm 0.1695 0.129 0.0405* 0.1492 sqm 0.0202* 0.129 0.0202* 0.1695 0.1695
11.9.4
40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 31mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 9mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 4mm to 7mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder : 7 marble chips) by volume including cement slurry etc. complete. 11.10.1 11.10.2 Dark shade pigment with Ordinary cement. Light shade pigment with white cement. sqm 11.10.3 Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. sqm 11.10.5 11.10.6 Light shade pigment with ordinary cement. Ordinary cement without any pigment. sqm sqm sqm 0.1783 0.1205 0.0578* 0.1494 sqm 0.0289* 0.1205 0.0578* 0.1783 0.1783
11.10.4
11.11
40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 28 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 12mm thick with white, black, chocolate, grey yellow or green marble chips of sizes from 7mm to 10mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 2:3 (2 cement marble powder mix : 3 marble chips) by volume including cement slurry etc. complete : 11.11.1 Dark shade pigment with ordinary cement. sqm 0.1907
386
Code No
Description
Unit
11.11.2
Light shade pigment with white cement. sqm
0.1097 0.081* 0.1502 sqm 0.0405* 0.1097 sqm 0.081* 0.1097 0.1097
11.11.3
Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment.
11.11.4
11.11.5 11.11.6 11.12
Light shade pigment with ordinary cement. Ordinary cement without any pigment.
sqm sqm
Marble chips skirting (upto 30 cm height) rubbed and polished to granolithic finish, top layer 6 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from smallest to 4 mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume : 11.12.1 11.12.1.1 11.12.1.2 18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement : 3 coarse sand) : Dark shade pigment with ordinary cement. Light shade pigment with white cement. sqm 11.12.1.3 Medium shade pigment with 50% white cement and 50% ordinary cement. White cement without any pigment. sqm 11.12.1.5 11.12.1.6 Light shade pigment with ordinary cement. Ordinary cement without any pigment. sqm sqm sqm 0.1292 0.0887 0.0405* 0.109 sqm 0.0203* 0.109 0.0405* 0.1292 0.1292
11.12.1.4
11.15
Crazy marble stone flooring including filling the gaps with light shade pigment with white cement marble powder mixture (3 parts of white cement : 1 part of marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 white, black or white and black marble chips of sizes from 1mm to 4mm nominal size by volume) and under layer 25mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) rubbing, polishing and cement slurry etc. complete : 11.15.1 18 mm thick crazy marble stone white, black or as specified. * White Cement 0.1200 sqm 0.0405*
387
Code No
Description
Unit
TILE FLOORING 11.16 Precast terrazo tiles 22mm thick with graded marble chips of size upto 12mm laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete with precast tiles on 20mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : 11.16.1 11.16.2 Light shade using white cement. Medium shade using 50%white cement and 50% ordinary cement. Dark shade using ordinary cement. Ordinary cement without any pigment. sqm 0.0895 0.0917 sqm sqm sqm 0.0220* 0.0939 0.0939
11.16.3 11.16.4 11.18
Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto 12 mm in skirting and risers of steps not exceeding 30 cm in height on 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of : 11.18.1 11.18.2 Light shade using white cement. Medium shades using 50% white cement and 50% ordinary cement. Dark shade using ordinary cement. Ordinary cement without any pigment. sqm 0.0734 0.1064 sqm sqm sqm 0.033* 0.1394 0.1394
11.18.3 11.18.4 11.19
Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : 11.19.1 11.19.2 Light shade using white cement. Medium shade using 50% white cement, 50% ordinary cement. Dark shade using ordinary cement. Ordinary cement without any pigment. sqm 0.0895 0.0917 sqm sqm sqm 0.024* 0.0939 0.0939
11.19.3 11.19.4 11.20
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). 11.20.1 Light shade using white cement. sqm 0.1291 0.066*
388
Code No
Description
Unit
11.20.2
Medium shade using 50% white cement 50% Grey cement. Dark shade using ordinary cement. Ordinary cement without any pigment.
0.1621 sqm sqm sqm 0.033* 0.1951 0.1951
11.20.3 11.20.4 11.21
Providing and fixing 10mm thick acid and or alkali resistant tiles of approved make and colour using acid and or alkali resisting mortar bedding and joints filled with acid and or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge. 11.21.1 11.21.1.1 11.21.2 11.21.2.1 In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand). Acid and alkali resistant tile. In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand). Acid and alkali resistant tile. sqm 0.0862* sqm 0.0786**
11.22
Tile work in skirting, risers of steps and dado (upto 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete. 11.22.1 11.22.1.1 Marble tiles (polished) Raj Nagar. 8 mm thick. sqm 0.1044
STONE FLOORING 11.23 Marble stone flooring with 18mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete KOTA STONE FLOORING 11.26 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 11.26.1 11.27 25 mm thick. sqm 0.1491
sqm
0.13512
Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. SAND STONE FLOORING
sqm
0.1374
11.28
40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 ( 1cement : 5 coarse sand) with joints
sqm
0.0775
389
Code No
Description
Unit
finished flush. 11.29 40 mm thick fine dressed stone flooring over 20 mm (average)thick base of cement mortar 1:5 (1 cement : 5 coarse sand) including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone. 40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement :5 coarse sand) with joints 3mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar CERAMIC GLAZED TILES 11.36 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture ) of approved make in all colours, shades except bergundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete. Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours, shades, except White, Ivory, Grey, Fume Red Brown laid on 20mm thick bed of Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete. Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours White, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigments etc., complete. Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete.
sqm
0.0931
11.30
sqm
0.0931
sqm
0.1242
11.37
sqm
0.1242
11.38
sqm
0.1242
11.39
sqm
0.1242
11.40
sqm
0.1242
390
Code No
Description
Unit
VITRIFIED FLOOR TILES 11.41 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete.
sqm
0.1242
* White cement ** Acid alkali resistant cement.
391
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION 12.0 ROOFING

12.16
10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with flat tile bricks of class designation 100 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat : 12.16.1 With F.P.S. brick tiles 100sqm
3.11
12.17
10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25mm thick mud mortar with bhusha at 35kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow-dung) and covered with machine moulded tile bricks of class designation 125 conforming to IS : 2690 (Part I) -1992 grouted with cement mortar 1:3 ( 1 cement : 3 fine sand ) mixed with 2% of integral water proofing compound by weight of cement and finished neat. 12.17.1 With machine moulded F.P.S. brick tiles 100sqm
3.11
12.19
Providing and laying brick tiles of class designation 100 over mumty roofs grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement, over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat : 12.19.1 With F.P.S. brick tiles 100sqm
9.13
12.20
Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness and of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete. Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 12.21.1 In 75x75mm deep chase
100sqm
19.76
12.21
metre
0.031
12.22
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edge sand
each
0.06
COEFFICIENTS FOR CEMENT CONSUMPTION S.H. -12.0 ROOFING
392
Code No
Description
Unit
making and finishing the outlet complete. 12.23 Providing sand stone slab for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 coarse sand) over wooden karries or R.C.C. battens (Karries and battens to be paid separately) including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 fine sand ) complete : 12.23.1 12.23.1.1 12.23.2 12.23.2.1 12.24 Red sand stone slab 40 to 50 mm thick White sand stone slab : 40 to 50 mm thick 100sqm 100sqm
0.74 0.74
Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. : 12.24.1 12.24.2 100 mm diameter 150 mm diameter each each
0.005 0.005
COEFFICIENTS FOR CEMENT CONSUMPTION S.H. -12.0 ROOFING
393
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION 13.0 FINISHING

CEMENT PLASTER (IN FINE SAND) 13.1 12 mm cement plaster of mix : 13.1.1 13.1.2 13.2 1:4 (1 cement : 4 fine sand) 1:6 (1 cement : 6 fine sand) 100sqm 100sqm
5.47 3.60
15 mm cement plaster on the rough side of single or half brick wall of mix : 13.2.1 13.2.2 1:4 (1 cement : 4 fine sand) 1:6 (1 cement : 6 fine sand) 100sqm 100sqm
6.54 4.30 8.51 5.60
13.3
20 mm cement plaster of mix : 13.3.1 13.3.2 1:4 (1 cement : 4 fine sand) 1:6 (1 cement : 6 fine sand) 100sqm 100sqm
CEMENT PLASTER (IN COARSE SAND) 13.4 12 mm cement plaster of mix : 13.4.1 13.4.2 13.5 1:4 (1 cement : 4 coarse sand) 1:6 (1 cement : 6 coarse sand) 100sqm 100sqm
5.47 3.60 6.54 4.30 8.51 5.60
15 mm cement plaster on rough side of single or half brick wall of mix : 13.5.1 13.5.2 1:4 (1 cement : 4 coarse sand) 1:6 (1 cement : 6 coarse sand) 100sqm 100sqm
13.6
20 mm cement plaster of mix : 13.6.1 13.6.2 1:4 (1 cement : 4 coarse sand) 1:6 (1 cement : 6 coarse sand) 100sqm 100sqm
CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT 13.7 12 mm cement plaster finished with a floating coat of neat cement of mix : 13.7.1 13.7.2 13.8 1:3 (1 cement : 3 fine sand) 1:4 (1 cement : 4 fine sand) 100sqm 100sqm
9.54 7.67
15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : 13.8.1 1:3 (1 cement : 3 fine sand) 100sqm
10.97
COEFFICIENTS FOR CEMENT CONSUMPTION S.H.: -13.0 FINISHING
394
Code No
Description
Unit
13.8.2 13.9
1:4 (1 cement : 4 fine sand)
100sqm
8.74
Cement plaster 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement. 13.9.1 13.9.2 12 mm cement plaster 20 mm cement plaster Sqm Sqm
112.80 154.00
13.10
15 mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall. CEMENT PLASTER IN TWO COATS
100sqm
10.97
13.11
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6mm thick cement plaster 1:6 (1 cement : 6 fine sand). 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge. 12 mm cement plaster 1:2 (1 cement : 2 stone dust) 15 mm cement plaster 1:2 (1 cement : 2 stone dust) on the rough side of single or half brick wall. 20 mm cement plaster 1:2 (1 cement : 2 stone dust) 6 MM CEMENT PLASTER
100sqm
6.26
13.12
100sqm 100sqm 100sqm 100sqm
8.13 9.79 11.70 15.23
13.13 13.14 13.15
13.16
6 mm cement plaster of mix : 13.16.1 1:3 (1 cement : 3 fine sand) 100sqm
3.67
13.17
6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams. Neat cement punning ROUGH CAST PLASTER
100sqm 100sqm
5.87 2.20
13.18
13.19
Rough cast plaster upto 10m height above ground level with a mixture of sand and gravel or crushed stone from 6mm to 10mm nominal size dashed over and including the fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. 13.19.1 Ordinary cement finish using ordinary cement 100sqm
11.59 11.59
PEBBLE DASH PLASTER 13.20 Pebble dash plaster upto 10m height above ground level with a mixture 100sqm
395
Code No
Description
Unit
of washed pebble or crushed stone 6mm to 12.5mm nominal size dashed over and including fresh plaster in two layers under layer 12mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. PLAIN CEMENT MORTAR BANDS 13.28 12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 fine sand) : 13.28.1 13.28.2 13.28.3 13.28.4 13.29 Flush Band Sunk Band Raised Band Moulded Band 100metre 1cm wide 100metre 1cm wide 100metre 1cm wide 100metre 1cm wide
0.053 0.053 0.053 0.053
18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 fine sand): 13.29.1 13.29.2 13.29.3 13.29.4 Flush Band Sunk Band Raised Band Moulded Band 100metre 1cm wide 100metre 1cm wide 100metre 1cm wide 100metre 1cm wide 100metre 1cm wide
0.076 0.076 0.076 0.076 0.07
13.30
18 mm thick moulded cement mortar band in two coats under layer 12mm thick with cement mortar 1:5 (1 cement : 5 coarse sand) top layer 6mm thick with cement mortar 1:4 (1 cement : 4 fine sand). POINTING OF BRICK WORK
13.31
Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand) : 13.31.1 13.31.2 Flush / Ruled/ Struck or weathered pointing. Raised and cut pointing 100sqm 100sqm
1.53 2.04
POINTING ON TILE BRICK WORK 13.32 Pointing on tile brick work with cement mortar 1:3 (1 cement :3 fine sand) : 13.32.1 Flush/ Ruled/ Struck or weathered pointing 100sqm
2.35
POINTING ON STONE WORK 13.33 Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) :
396
Code No
Description
Unit
13.33.1 13.33.2 13.34 13.35
Flush/ Ruled pointing Raised and cut pointing
100sqm 100sqm 100sqm
1.17 2.35 2.35*
Raised and cut pointing on stone work in white cement mortar 1:3 (1 white cement : 3 marble dust) Pointing on stone slab ceiling with cement mortar 1:2 (1 cement : 2 fine sand): 13.35.1 Flush/ Ruled pointing
100sqm
0.68
13.72
Washed stone grit plaster on exterior walls of height upto 10 M. above level in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement : 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-in- charge (Payment for providing grooves shall be made separately).
100sqm
17.472
Note: - cement consumption for pointing is same for FPS & modular bricks. * White cement
397
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION 14.0 REPAIR TO BUILDING

14.1
Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. meters and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : 14.1.1 14.1.2 With cement mortar 1:4 (1 cement : 4 fine sand) With cement mortar 1:4 (1 cement : 4 coarse sand). 100sqm 100sqm
6.95 6.95
14.2
Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts embedding hold fasts in cement concrete blocks with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 meters lead : 14.2.1 14.2.2 14.2.3 Door chowkhats Window chowkhats Clerestory window chowkhats each each each
0.12 0.06 0.03
14.12
Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab including cutting chase and making good and painting exposed portion of the clamps complete. Regrading terracing of mud phaska covered with tiles or brick, in cement by dismantling tiles or bricks, removing mud plaster preparing the surface of mud phaska to proper slope relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement : 3 fine sand) including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) within 50 metres lead. Replacing sand stone slabs in roofing laid in cement mortar 1:4 (1 cement : 4 coarse sand) including necessary repairs and cement pointing with same mortar complete including disposal of rubbish to dumping ground within 50 metres of lead : 14.14.1 Red/ white sand stone slabs 30 to 50 mm thick.
each
0.016
14.13
100sqm
3.11
14.14
100sqm
0.78
14.15
Renewing wooden battens in roofs, including making good the holes in wall and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping
COEFFICIENTS FOR CEMENT CONSUMPTION S.H.: -14.0 REPAIRS TO BUILDING
398
Code No
Description
Unit
ground within 50 metres lead : 14.15.1 14.16 Sal wood battens. cum
0.36
Renewing wooden beams in roofs including making good the holes in walls and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : 14.16.1 14.16.1.1 14.16.1.2 14.16.2 14.16.2.1 14.16.2.2 Not exceeding 4.00 metres in length. Sal wood beams Hollock wood beams Above 4.00 metres and upto 5.00 metres length. Sal wood beams Hollock wood beams cum cum cum cum
0.13 0.13 0.13 0.13
14.18
Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska : 14.18.1 14.18.2 With F.P.S. brick tiles With modular brick tiles 100sqm 100sqm
0.76 0.76
COEFFICIENTS FOR CEMENT CONSUMPTION S.H.: -14.0 REPAIRS TO BUILDING
399
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION 16.0 ROAD WORK

FENCING
16.15 Supplying at site : 16.15.1 R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-in-charge (cost of earth works in excavation, concrete works to be paid separately).
cum
4.00
16.23
Providing and fixing 15cm dia at top 20cm at bottom and 90cm high precast reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) boundary stone as per standard design including finishing smooth with cement mortar 1:3 (1 cement : 3 fine sand) (cost of excavation, refilling and concreting to be paid for separately). Providing and fixing precast reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) kilometre stone as per standard design including finishing smooth in 1:3 cement mortar (1 cement : 3 fine sand) but excluding the cost of earth work, concrete in foundation, painting and lettering etc. which shall be paid for separately. 16.24.1 16.24.2 16.24.3 35x111x25 cm size. 50x152.5x25 cm size. 35x93.5x18 cm size.
each
0.082
16.24
each each each
0.37 0.698 0.23
CONCRETE PAVEMENT
16.42 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete.
cum
3.20
MISCELLANEOUS
16.49 Making bell mouth opening/ entrance of size 100x50x50cm for drainage pipe under footpath including providing cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) for shape of bell mouth including plastering providing and fixing precast R.C.C./ S.F.R.C. slab including plastering with cement mortar 1:3 (1 cement : 3 fine sand) of 6 mm thickness on exposed surface of the slab & bell mouth including centring, shuttering & neat cement punning inside
10 nos
6.60
COEFFICIENTS FOR CEMENT CONSUMPTION S.H.: -16.0 ROAD WORK
400
Code No
Description
Unit
the bell mouth etc. all complete. 16.52 Providing and fixing precast lime fly ash concrete blocks 1:2:3:6 (1lime : 2 fly ash : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including finishing with 10mm thick cement mortar 1:3 (1 cement : 3 coarse sand) in foot paths including preparation of sub grade with a hand rammer, laying 10 mm thick leveling course of fine sand (jamuna sand) and filling the joints with fine sand.
sqm
0.05
NEW ITEMS/ MODIFIED ITEMS

16.63 Providing and laying and making kerb channel 30cm wide and 50mm thick of cement concrete 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth etc. complete and as per direction of Engineer-in-charge. Providing and fixing at or near ground level factory made RCC pavement slab of M-30 grade of size 450x450x50mm (HPL or equivalent ) including reinforcement with 6mm dia M.S. bars 4 nos on each side including setting in position in footpath to the required level and line over a bed of 20mm average thick cement mortar (1 cement : 3 coarse sand ) having thickness not more than 5mm except on curve including filling of joints with same cement mortar and making grooves etc. complete as per direction of Engineer-in-charge. Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement : 3 coarse sand ) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured payment ). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
metre
0.11
16.67
100sqm
7.75
16.69
cum
0.05
COEFFICIENTS FOR CEMENT CONSUMPTION S.H.: -16.0 ROAD WORK
401
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION 17.0 SANITARY INSTALLATIONS

Code No
Description
Unit
17.1/17.2/ 17.3
Fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required Fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.4.1 17.4.2 17.4.3 17.4.4 One urinal basin with 5 litre white P.V.C. automatic flushing cistern. Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern. Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern. Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern.
each
0.05
17.4
each each each each
0.025 0.04 0.067 0.095
17.5
Fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors : 17.5.1 17.5.2 17.5.3 17.5.4 Single half stall urinal with 5 litre P.V.C. automatic flushing cistern. Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern. Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern. Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern. each each each each 0.051 0.102 0.153 0.203
17.6
Fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic
COEFFICIENTS FOR CEMENT CONSUMPTION S.H.: -17.0 SANITARY INSTALLATIONS
402
Code No
Description
Unit
flushing cistern, with fittings, standard size G.I. flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required : 17.6.1 17.6.2 17.6.3 17.6.4 17.7 Single squatting plate with 5 litre P.V.C. automatic flushing cistern. Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern. Range of three squatting plates with 10 litre P.V.C. automatic flushing cistern. Range of four squatting plates with 10 litre P.V.C. automatic flushing cistern. each each each each 0.051 0.102 0.153 0.203
Fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls Fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. Fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls Fixing draining board with C.I. brackets including painting of brackets, cutting and making good the walls Fixing White vitreous china water closet squatting pan (Indian type) Fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet Fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively. Fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. Fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Fixing kitchen sink including making all connections excluding cost of fittings. Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. :
each each
0.025 0.016*
17.8 17.9/17.10/ 17.11 17.12 17.13 17.17 17.23
each each each each
0.025
0.014
0.025 0.025
each each each each
0.01 0.02 0.015 0.015
17.24 17.25 17.26/17.27 17.37
each
0.005
403
Code No
Description
Unit
17.59 17.60
Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally cast (spun) iron pipes of diameter 100, 75 or 50 mm Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 17.60.1 17.60.2 100 mm inlet and 100 mm outlet 100 mm inlet and 75 mm outlet
each
0.005
each each
0.025 0.025
17.61
Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size ) including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) : 17.61.1 17.61.2 17.61.3 100 mm dia. 75 mm dia. 50 mm dia. 100 metre 100 metre 100 metre 5.40 3.70 1.87
* White Cement.
404
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION 18.0 WATER SUPPLY

Code No
Description
Unit
18.1/18.4/ 18.7/18.10
Providing and fixing G.I./ PE-AL-PE/ PP-R pipes complete with fittings and clamps, including cutting and making good the walls etc. Internal work Exposed on wall. 18.10.1 18.10.2 18.10.3 18.10.4 18.10.5 18.10.6 15 mm dia. nominal bore 20 mm dia. nominal bore 25 mm dia. nominal bore 32 mm dia. nominal bore 40 mm dia. nominal bore 50 mm dia. nominal bore metre metre metre metre metre metre metre 0.05 0.06 0.07 0.075 0.08 0.08 0.88
18.2/18.5/ 18.8/18.11 18.32
Concealed pipes including painting with anti corrosive bitumastic paint, cutting chases and making good the wall Constructing masonry Chamber 30x30x50 cm, inside with 75 class designation brick work in cement mortar 1:5 (1 cement :5 fine sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design : 18.32.1 With F.P.S. bricks
each
0.26
18.33
Constructing masonry Chamber 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:5 (1 cement : 5 fine sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size ) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 18.33.1 With F.P.S. bricks each 1.44
18.34
Constructing masonry Chamber 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:5 (1 cement : 5 fine sand)
COEFFICIENTS FOR CEMENT CONSUMPTION S.H. -18.0 WATER SUPPLY
405
Code No
Description
Unit
for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 18.34.1 18.35 With F.P.S. bricks each 2.48
Constructing masonry Chamber 120x120x100 cm, inside with 75 class designation brick work in cement mortar 1:5 (1 cement : 5 fine sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 18.35.1 With F.P.S. bricks each 3.50
18.36
Constructing masonry Chamber 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:5 (1 cement : 5 fine sand) for fire hydrants, with C.I. surface box 350x350 mm. top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 18.36.1 With F.P.S. bricks each 1.30
18.37
Constructing masonry Chamber 60x45x50 cm, inside with 75 class designation brick work in cement mortar 1:5 (1 cement : 5 fine sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 18.37.1 With F.P.S. bricks each 1.34
406
Code No
Description
Unit
18.76
Cutting holes up to 30x30 cm in walls including making good the same: 18.76.1 With F.P.S. bricks 100 nos. 2.92
18.77
Cutting holes up to 15x15cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof. Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 coarse sand 6 graded stone aggregate 20 mm nominal size) including disposal of malba.
100 nos. 100 metre
0.70 0.88
18.78 18.79
100 metre
4.90
407
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION 19.0 DRAINAGE

Code No Description Unit Quantity of cement to be used per unit quantity of work (Quintals)
19.1
Jointing glazed stoneware pipes grade A with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 19.1.1 19.1.2 19.1.3 19.1.4 19.1.5 19.1.6 100 mm diameter 150 mm diameter 200 mm diameter 230 mm diameter 250 mm diameter 300 mm diameter 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 2.17 3.23 4.33 4.87 5.40 6.47
19.2
Laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) alround S.W. pipes including bed concrete as per standard design: 19.2.1 19.2.2 19.2.3 19.2.4 19.2.5 100 mm diameter S.W. pipe 150 mm diameter S.W. pipe 200 mm diameter S.W. pipe 230 mm diameter S.W. pipe 250 mm diameter S.W. pipe 100 metre 100 metre 100 metre 100 metre 100 metre 19.24 23.53 27.43 30.03 31.72
19.3
Laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) upto haunches of S.W. pipes including bed concrete as per standard design : 19.3.1 19.3.2 19.3.3 19.3.4 19.3.5 19.3.6 100 mm diameter S.W. pipe 150 mm diameter S.W. pipe 200 mm diameter S.W. pipe 230 mm diameter S.W. pipe 250 mm diameter S.W. pipe 300 mm diameter S.W. pipe 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 9.14 14.82 17.42 19.11 20.28 23.40
19.4
Providing and fixing square-mouth S.W. gully trap grade 'A' complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 19.4.1 100x100 mm size P type each 0.27
COEFFICIENTS FOR CEMENT CONSUMPTION S.H.:. -19.0 DRAINAGE
408
Code No
Description
Unit
19.4.2 19.4.3 19.6
150 x 100 mm size P type. 180x150 mm size P type
each each
0.26 0.25
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 19.6.1 19.6.2 19.6.3 19.6.4 19.6.5 19.6.6 19.6.7 19.6.8 19.6.9 19.6.10 19.6.11 19.6.12 19.6.13 100 mm dia. R.C.C. pipe 150 mm dia. R.C.C. pipe 250 mm dia. R.C.C. pipe 300 mm dia. R.C.C. pipe 450 mm dia. R.C.C. pipe 500 mm dia. R.C.C. pipe 600 mm dia. R.C.C. pipe 700 mm dia. R.C.C. pipe 800 mm dia. R.C.C. pipe 900 mm dia. R.C.C. pipe 1000 mm dia. R.C.C. pipe 1100 mm dia. R.C.C. pipe 1200 mm dia. R.C.C. pipe 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 100 metre 0.5 0.6 0.9 1.10 2.40 2.60 3.20 3.70 4.20 4.90 5.50 6.10 6.80
19.7
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design : 19.7.1 19.7.2 19.7.3 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, each each each 2.92 4.73 4.73
19.8
Extra for depth for manholes
409
Code No
Description
Unit
19.8.1 19.8.2 19.9
Size 90x80 cm Size 120x90 cm
metre metre
1.26 1.52
Constructing brick masonry circular type manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design : 19.9.1 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560mm internal diameter ) : each metre 2.75 3.61
19.10 19.11
Extra depth for circular type manhole 0.91m internal dia (at bottom) with beyond 0.91m to 1.67m Constructing brick masonry circular manhole 1.22m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design : 19.11.1 1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter
each metre
5.39 6.27
19.12 19.13
Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68 m to 2.29 m Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design : 19.13.1 2.30m deep with SFRC Cover and frame (heavy duty HD20 grade designation) 560mm internal diameter
each metre
10.86 16.71
19.14
Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m
410
Code No
Description
Unit
19.15
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete Replacement of M.S. foot rests in manholes including dismantling concrete blocks and fixing with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) : Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality 19.19.1 19.19.1.1 19.19.1.2 19.19.1.3 19.19.2 19.19.2.1 19.19.2.2 19.19.3 19.19.3.1 19.19.4 19.19.4.1 L D- 2.5 Rectangular shape 600x450mm internal dimensions Square shape 450mm internal dimensions Circular shape 450mm internal diameter M D - 10 Square shape 450mm internal dimension Circular shape 500mm internal diameter H D - 20 Circular shape 560 mm internal diameter EHD - 35 Circular shape 560 mm internal dia.
100 nos.
0.88
19.16
100 nos
1.98
19.17
100 nos
0.88
19.19
each each each
0.128 0.096 0.096
each each
0.128 0.096
each
0.096
each
0.096
19.21
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc.
411
Code No
Description
Unit
complete : 19.21.1 19.21.2 19.21.3 19.22 For pipes 100 to 230 mm diameter For pipes 250 to 300 mm diameter For pipes 350 to 450 mm diameter each each each 0.056 0.095 0.153
Providing sand cast iron drop connection externally for 60 cm drop from branch sewer line to main sewer manhole including inspection and cleaning eye with chain and lid, sand cast iron drop pipe and bend encased alround with cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) with all centring and shuttering required, cutting holes in walls and making good with brick work in cement mortar 1:4 (1 cement : 4 coarse sand) plastered with cement mortar 1:3 (1 cement : 3 coarse sand) on inside of the manhole wall lead caulked joints between sand cast iron pipes and fittings, stiff cement mortar 1:1 (1 cement : 1 fine sand) joints between sand cast iron tee and S.W. pipe, making required channels complete as per standard design and specifications : 19.22.1 19.22.2 100 mm dia. sand cast iron drop connection 150 mm dia. sand cast iron drop connection each each 0.34 0.46
19.23
Extra for depths beyond 60 cm of sand cast iron drop connection complete : 19.23.1 19.23.2 For 100 mm dia. sand cast iron drop connection For 150 mm dia. sand cast iron drop connection metre metre 0.21 0.26
19.27
Constructing brick masonry road gully chamber 50x45x60 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design : Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand ) with precast R.C.C. vertical grating complete as per standard design : Constructing brick masonry road gully chamber 110x50x77.5 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm precast R.C.C. horizontal grating with frame and vertical grating complete as per standard design : Constructing brick masonry chamber for underground C.I. inspection chamber and bends with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand
each
0.93
19.28
each
0.82
19.29
each
1.66
19.30
412
Code No
Description
Unit
: 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : 19.30.1 19.30.2 19.30.3 19.31 Inside dimensions 455x610 mm and 45 cm deep for single pipe line : Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets : Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets : each each each 0.90 1.02 1.27
Extra for depth beyond 45 cm of brick masonry chamber : 19.31.1 19.31.2 19.31.3 For 455x610 mm size For 500x700 mm size For 600x850 mm size metre metre metre
0.87 0.95 1.12
19.32
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 19.34.1 19.34.2 100 mm dia 150 mm dia
each
0.072
19.34
each each
0.013 0.019
413
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION 20.0 PILE WORK

Code No Description Unit Quantity of cement to used per unit quantity of work (quintals
20.1
Providing, driving and installing driven cast-in-situ reinforced cement concrete piles of specified diameter and length below the pile cap M 35 in cement concrete, to carry safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of shoe and the length of pile to be embedded in the pile cap etc. all complete. (Length of pile for payment shall be measured from top of shoe to the bottom of pile cap) : 20.1.1 20.1.2 20.1.3 20.1.4 20.1.5 20.1.6 20.1.7 20.1.8 400 mm dia piles 450 mm dia piles 500 mm dia piles 550 mm dia piles 750 mm dia piles. 1000 mm dia piles. 1200 mm dia piles. 1500 mm dia piles. metre metre metre metre metre metre metre metre 0.537 0.681 0.840 1.017 1.889 3.360 4.836 7.561
20.2
Boring, providing and installing bored cast-in-situ reinforced cement concrete pile of specified diameter and length below the pile cap M 35 in cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with, bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap). 20.2.1 20.2.2 20.2.3 20.2.4 20.2.5 20.2.6 20.2.7 20.2.8 20.2.9 300 mm dia piles 400 mm dia piles 450 mm dia piles 500 mm dia. piles 600 mm dia piles 750 mm dia piles. 1000 mm dia piles. 1200 mm dia piles. 1500 mm dia piles. metre metre metre metre metre metre metre metre metre 0.302 0.537 0.681 0.840 1.209 1.889 3.360 4.836 7.561
COEFFICIENTS FOR CEMENT CONSUMPTION S.H. -20.0 PILE WORK
414
Code No
Description
Unit
Quantity of cement to used per unit quantity of work (quintals
20.3
Boring, Providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M 35 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) : 20.3.1 20.3.2 20.3.3 20.3.4 300 mm dia piles. 400 mm dia piles 450 mm dia piles 550 mm dia piles metre metre metre metre 0.333 0.633 0.816 1.027
20.4
Extra over item No. 20.3 for providing additional bulb in under reamed piles, under specified dia meter (Only the quantity of extra bulbs are to be paid). 20.4.1 20.4.2 20.4.3 20.4.4 300mm dia piles. 400mm dia piles. 450 mm dia piles. 550 mm dia piles. each each each each 0.141 0.27 0.347 0.437
20.5
Providing, driving and installing driven Pre-cast reinforced cement concrete piles of specified diameter and length below the pile cap in M 35 cement concrete to carry safe working load not less than specified. With a central through preformed hole with M.S. black pipe of dia, 40mm for grouting with cement sand grouting of mix 1:2 (1 cement : 2 coarse sand) under sufficient positive pressure to ensure complete filling including centring, shuttering, driving and removing the steel casing pipe and lifting casing etc. complete but excluding the cost of steel reinforcement. (Length of pile for payment shall be measured from top of the shoe to the bottom of pile cap). 20.5.1 20.5.2 20.5.3 20.5.4 20.5.5 20.5.6 400 mm dia piles. 450 mm dia piles. 500 mm dia piles. 550 mm dia piles. 750 mm dia piles. 1000 mm dia piles. metre metre metre metre metre metre 0.621 0.784 0.959 1.168 2.663 3.839
COEFFICIENTS FOR CEMENT CONSUMPTION S.H. -20.0 PILE WORK
415
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION 22.0 WATER PROOFING

22.1
Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge and consisting of : i) Ist layer of 22mm to 25mm thick approved and specified rough stone slab over a 25mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound . ii) 2nd layer of 25mm thick cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportions. iii) Finishing top with stone aggregate of 10mm to 12mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer. 22.1.1 Using rough kota stone. sqm 0.342
22.2
Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge : 22.2.1 Using rough Kota stone sqm 0.443
22.3
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : i) Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and

sqm 0.158
COEFFICIENTS FOR CEMENT CONSUMPTION S.H. -22.0 WATER PROOFING
416
Code No
Description
Unit
horizontal surface.

PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.) 22.5 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately For the purpose of measurement the entire treated surface will be measured. Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of
sqm
0.0123
22.6
sqm
0.0195
22.7
417
Code No
Description
Unit
cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : 22.7.1 22.14 With average thickness of 120mm and minimum thickness at khurra as 65 mm. sqm 0.387
Grading roof for water proofing treatment with 22.14.1 22.14.2 22.14.3 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Cement mortar 1:3 (1 cement : 3 coarse sand) Cement mortar 1:4 (1cement : 4 coarse sand) cum cum cum 3.20 5.10 3.80
418
COEFFICIENT FOR BITUMEN CONSUMPTION
419
2.0 COEFFICIENT FOR BITUMEN CONSUMPTION 16.0 ROAD WORK

Code No Description Unit Quantity of bitumen to be used per unit quantity of work (quintals)
SURFACE DRESSING 16.25 Surface dressing on new surface with paving bitumen of grade A-90/S-90 of approved quality using 2.25 kg of bitumen per sqm with 1.65 cum of stone chippings 13.2 mm nominal size per 100 sqm of road surface including consolidation with road roller of 6 to 8 tonne capacity etc. complete: Surface dressing on new surface in two coats with bitumen of grade A90/S-90 of approved quality using 1.8kg.of bitumen per sqm with 1.5cum of stone chippings 13.2mm nominal size per 100 sqm of road surface for first coat and 1.1kg. of bitumen per sqm. with 1.00 cu. metre of stone chippings 11.2mm nominal size per 100 sqm. of road surface for second coat including consolidation of each coat separately with road roller of 6 to 8 tonne capacity etc. complete. Surface dressing on old surface with hot bitumen of grade A-90/ S-90 of approved quality using 1.95 kg of bitumen per sqm. with 1.50 cum of stone chippings 11.2 mm nominal size per 100 sqm of road surface including consolidation with road roller of 6 to 8 tonne capacity, etc. complete. Surface dressing one coat on new surface with bitumen of specified grade at a rate of 1.95 kg/sqm. of surface area with 1.5 cum. of stone chippings 13.2 mm nominal size per 100 sqm. of road surface including consolidation with road roller of 6 to 8 tonne capacity , etc. complete : 16.28.1 16.29 Using bitumen emulsion (minimum 50% bitumen content RS grade conforming to IS : 8887). sqm
sqm
0.0225
16.26
sqm
0.029
16.27
sqm
0.0195
16.28
0.0195
Surface dressing one coat on old surface with bitumen of specified grade at the rate of 1.22 kg/ sqm of surface area with 1.10 cum of stone chippings 11.2 mm nominal size per 100 sqm. of road surface including consolidation with road roller of 6 to 8 tonne capacity etc. complete : 16.29.1 Using bitumen emulsion (minimum 50% bitumen content RS grade conforming to IS : 8887). sqm
0.0122
PREMIX CARPET
16.30 Providing and applying tack coat using hot straight run bitumen of grade 80/ 100 including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications : 16.30.1 On W.B.M. @ 0.75 Kg / sqm. sqm
0.0075
COEFFICIENT FOR BITUMEN CONSUMPTION SH: 16.0 ROAD WORK
421
Code No
Description
Unit
Quantity of bitumen to be used per unit quantity of work (quintals)
16.30.2 16.31
On bituminous surface @ 0.50 Kg / sqm.
sqm
0.0050
Providing and applying tack coat using bitumen emulsion (Rapid Setting) complying with IS 8887-1995, spraying the bitumen emulsion with mechanically operated spray unit, cleaning and preparing the existing road surface as per specifications : 16.31.1 16.31.2 On W.B.M @ 0.4kg/sqm. On bituminous surface @ 0.25kg/sqm. sqm sqm
0.0040 0.0025
16.32
2 cm premix carpet surfacing with 1.8 cum and 0.90 cum of stone chippings of 13.2 mm size and 11.2 mm size respectively per 100 sqm. and 52 kg. and 56 kg. of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively including a tack coat with hot straight run bitumen including consolidation with road roller of 6 to 9 tonne capacity etc. complete: (tack coat to be paid for separately). 16.32.1 16.32.2 16.32.3 With paving Asphalt 80 /100 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt. With paving Asphalt 60/70 with no solvent With Refinery Modified Bitumen CRMB 55 conforming to IRC : SP : 53-1999. sqm sqm sqm
0.0144 0.0144 0.0144
16.33
2.5 cm premix carpet surfacing with 2.25 cum and 1.12 cum of stone chippings of 13.2mm and 11.2mm size respectively per 100 sqm. and 52 kg. and 56 kg. of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively including a tack coat with hot straight run bitumen including consolidation with road roller of 6 to 9 tonne capacity etc. complete. (tack coat to be paid for separately) : 16.33.1 16.33.2 16.33.3 With paving Asphalt 80/100 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt. With paving Asphalt 60/70 with no solvent With Refinery Modified Bitumen CRMB 55 conforming to IRC : SP : 53-1999. sqm sqm sqm
0.018 0.018 0.018
16.34
2 cm premix carpet surfacing with 2.4cum of stone chippings 11.2 mm nominal size per 100 sqm and bitumen emulsion (medium setting min. 65% bitumen content) complying with IS : 8887-1995 using 96kg per cum of chipping including consolidation with road roller of 6 to 9 tonne capacity etc. complete. 2.5 cm premix carpet surfacing with 3 cum of stone chippings 10 mm nominal size per 100 sqm and bitumen emulsion (medium setting min. 65% bitumen contents) complying with IS : 8887-1995 using 96 kg per cum of chippings of road surface including consolidation with road roller etc complete.
sqm
0.033*
16.35
sqm
0.0388*
422
Code No
Description
Unit
16.36
Providing and laying Bitumen Penetration Macadam with hard stone aggregate of quality, size and grading as specified, with bitumen of suitable penetration grade including required key aggregate as specified, spreading coarse aggregate with the help of self propelled / tipper tail mounted aggregate spreader and applying bitumen by a pressure distributor and then spreading key aggregate with the help of aggregate spreader complete including consolidation with road roller of minimum 8 to 10 tonne capacity to achieve specified values of compaction and surface accuracy : 16.36.1 For 50mm compacted thickness using coarse aggregate of size 50-20 mm graded @ 0.60 cum per 10 sqm key aggregate of size 12.5 mm graded @ 0.15 cum per 10 sqm. With paving asphalt 80/100 @ 50 kg/10 sqm. For 75 mm compacted thickness in two layers using stone aggregate of size 63-41 mm graded @ 0.90 cum per 10 sqm key aggregate of size 20.0 mm graded @ 0.18 cum per 10 sqm. With paving asphalt 80/100 @ 68 kg/10 sqm.
sqm
0.05
16.36.2
sqm
0.068
MASTIC AND BITUMASTIC WEARING COURSE 16.37 Providing and laying bitumen mastic wearing course (as per specifications) with industrial bitumen of grade 85/25 conforming to IS : 702 prepared by using mastic cooker and laid to required level and slope including providing antiskid surface with bitumen precoated fine grained hard stone chipping of approved size at the rate of 0.005 cum per 10 sqm and at approximates spacing of 10cm centre to centre in both directions, pressed into surface protruding 1mm to 4mm over mastic surface, including cleaning the surface, removal of debris etc. all complete. ( Considering bitumen using 10.2% as per MORTH specification .) 16.37.1 16.37.2 16.38 25mm thick. 40 mm thick sqm sqm
0.0586 0.0938
2.5 cm thick bitumastic sheet with hot bitumen of approved quality using stone chippings (60% 12.5 mm nominal size and 40% 10 mm nominal size) @ 1.65 cum per 100 sqm and coarse sand at 1.65 cum per 100 sqm of road surface and with bitumen @ 56 kg/cum of stone chippings and @ 128 kg/cum. of sand over a tack coat with hot straight run bitumen including consolidation with road roller of 8 to 10 tonne etc. complete. (tack coat to be paid separately) : 16.38.1 16.38.2 16.38.3 With paving Asphalt 80/100 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt. With paving Asphalt 60/70. With Refinery Modified Bitumen CRMB 55 conforming to sqm sqm sqm
0.0303 0.0303 0.0303
423
Code No
Description
Unit
IRC : SP : 53-1999. 16.39 4 cm thick bitumastic sheet with hot bitumen of approved quality using stone chippings (60% 12.5mm nominal size and 40% 10mm nominal size) @ 2.60cum per 100 sqm and coarse sand at 2.60cum per 100 sqm of road surface and with bitumen @ 56 kg/cum. of stone chippings and at 128 kg/cum of sand over a tack coat with hot straight run bitumen including consolidation with road roller of 8 to 10 tonne etc. complete. (tack coat to be paid separately) : 16.39.1 16.39.2 16.39.3 With paving Asphalt 80/100 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt. With paving asphalt 60/70 with no solvent With Refinery Modified Bitumen CRMB 55 conforming to IRC : SP : 53-1999. sqm sqm sqm
0.0479 0.0479 0.0479
SEAL COAT
16.40 Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade 80 / 100 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road roller all complete. Providing and laying seal coat over prepared surface of road with bitumen heated in bitumen boiler fitted with the spray set spraying using 98 kg of bitumen of grade 80/100 and blinding surface with 0.90cum of stone aggregate of 6.7 mm size (Passing 11.2mm sieve and retained on 2.36mm sieve) per 100 sqm of road surface including rolling and finishing with power road roller all complete. Providing and laying Dense Bituminous macadam on prepared surface with specified graded crushed stone aggregate for profile corrective base/ binding course including loading of aggregate with FE loader and hot mixing of stone aggregate, filler and bitumen in hot mix plant, transporting the mixed material by tippers to paver and laying the mixed material with paver finisher fitted with electronic sensing device to the required level and grade and rolling by road roller as per MORTH specifications, to achieve the desired density, but excluding the cost of primer / tack coat. 16.54.1 50/75mm average compacted thickness with bitumen of 60/70 grade @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate).
sqm
0.0077
16.41
sqm
0.0098
16.54
cum
1.15
16.55
Providing and laying Bituminous Macadam on prepared surface with specified graded crushed stone aggregate for profile corrective base/ binder course including loading of aggregate with F.E. loader , hot mixing of stone aggregates and bitumen in hot mix plant, transporting the mixed material by tippers to paver and laying the mixed material with paver
424
Code No
Description
Unit
finisher fitted with electronic sensing device to the required level and grade and rolling with road rollers, as per MORTH specification to achieve the desired density and compaction but excluding the cost of primer/ tack coat. 16.55.1 50mm / 75mm average compacted thickness with bitumen of 60/70 grade @ 3.5% (Percentage by weight of total mix)
cum
0.7708
16.56
Providing and laying Dense Bituminous concrete on prepared surface with specified graded stone aggregate for wearing course including loading of aggregate with F.E. loader , and hot mixing of bitumen with filler and stone aggregate in hot mix plant , transporting the mixed material by tippers to paver and laying the mixed material with mechanical paver finisher fitted with electronic sensing device to the required level and grade and rolling with road rollers, as per MORTH specification, to achieve the desired density and compaction but excluding cost of primer/ tack coat. 16.56.1 40 mm/50mm compacted thickness with bitumen of grade 60/ 70 @ 5.5% and lime @3% (percentage by weight of total mix).
cum
1.298
16.57
Providing and laying Dense Bituminous Concrete on prepared surface with specified graded stone aggregate for wearing course including loading of aggregate with F.E. loader, and hot mixing of bitumen with filler and stone aggregate in hot mix plant, transporting the mixed material by tippers to paver and laying the mixed material with mechanical paver finisher fitted with electronic sensing device to the required level and grade and rolling with road rollers, as per MORTH specifications, to achieve the desired density and compaction but excluding cost of primer/ tack coat. 16.57.1 40 mm/50mm compacted thickness with bitumen of grade CRMB - 60 @ 5.5% and lime @3% (percentage by weight of total mix).
cum
1.298
16.58
Providing and laying Dense Bituminous Concrete on prepared surface with specified graded stone aggregate for wearing course including loading of aggregate with F.E. loader, and hot mixing of bitumen with filler and stone aggregate in hot mix plant, transporting the mixed material by tippers to paver and laying the mixed material with mechanical paver finisher fitted with electronic sensing device to the required level and grade and rolling with road rollers, as per MORTH specifications, to achieve the desired density and compaction but excluding cost of primer/ tack coat. 16.58.1 40 mm/50mm compacted thickness with bitumen of grade PMB - 40 @ 5.5% and lime @3% (percentage by weight of cum
1.298
425
Code No
Description
Unit
total mix). * Including tack coat
426
2.0 COEFFICIENT FOR BITUMEN CONSUMPTION 22.0 WATER PROOFING

Code No Description Unit Quantity of bitumen to be used per unit quantity of work (quintals)
22.3
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : i) Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.

PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.) 22.6 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately For the purpose of measurement the entire treated surface will be measured. Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6mm and down size or pea-sized gravel spread at 6 cubic diameter per square metre including sqm 0.017
sqm
0.01
22.8
Code No
Description
Unit
preparation of surface but excluding grading complete with : 22.8.1 22.9 Bitumen felt (hessian base)type 3 grade I conforming to IS : 1322. sqm 0.029
Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth course of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45, 1.20 and 1.45 Kg per square metre of area respectively, second and fourth courses of roofing felt type 3 grade I conforming to IS : 1322 (Hessian based self finished bitumen felt) conforming to IS : 1322 and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface but excluding grading, complete. Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blown or / and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade I (fibre base self finished bitumen felt) six and final courses of stone grit 6mm and down size or pea sized gravel spread at 6cu.dm per sqm including preparation of surface, excluding grading, compete. Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blow or/ and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade II (glass fibre base self finished bitumen felt) and sixth and final course of stone grit 6mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface but excluding grading, complete. Providing and fixing APP (Atactic Polypropylene Polymer) modified prefabricated five layer 2mm thick water proofing membrance, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sq. mtr. by the same membrance manufacture of density at 25C, 0.87 - 0.89 kg/ ltr and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using Butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23C as 350/300 N/ 5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150C. Cold flexibility shall be upto -2C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacture of membrane.
sqm
0.041
22.10
sqm
0.0435
22.11
sqm
0.0435
22.18
428
Code No
Description
Unit

0.036
22.18.1 22.19
2mm (for corrugated roof sheets)
sqm
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sqm. by the same membrane manufactured of density at 25C, 0.87 - 0.89 kg/ltr and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23C as 350/300 N/5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150C. Cold flexibility shall be upto 2C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 22.19.1 3 mm thick sqm 0.024
22.20
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sqm. by the same membrane manufacture of density at 25C, 0.87-0.89 kg/ltr and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150C. Cold flexibility shall be upto -2C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 22.20.1 3 mm thick sqm 0.036
COEFFICIENT FOR BITUMEN CONSUMPTION -S.H.: -22.0 WATER PROOFING
429

Delhi Schedule Rate

Uploaded by

Copyright:

Available Formats

Delhi Schedule Rate

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Delhi Schedule Rate

Uploaded by

Copyright:

Available Formats

All rights reserved.

DIAL-A-BOOK 011-4175 8700

New Delhi December, 2007

(A. CHAKRABARTI ) DIRECTOR GENERAL (WORKS)

8.0 8.1 8.2 8.3 8.4

9.0 9.1 9.2

9.22 9.23 10.

BASIC APPROACH FOR PREPARATION OF DELHI SCHEDULE OF RATES, 2007

BASIC RATES 0.1 HIRE CHARGES OF PLANTS

BASIC RATES 0.1 HIRE CHARGES OF PLANTS

Unit per day per day per day day

Rate Rs. 5,000.00 1,000.00 1,000.00 1,600.00

per day day day day day day day

800.00 88,000.00 480.00 12,000.00 800.00 800.00 800.00

BASIC RATES 0.1 HIRE CHARGES OF PLANTS

BASIC RATES 0.2 LABOUR

BASIC RATES 0.2 LABOUR

Code No 0156* 0157 0159

Rate Rs. 146.55 166.00 151.50

Day Day Day

BASIC RATES 0.2 LABOUR

BASIC RATES 0.3 MATERIALS

BASIC RATES 0.3 MATERIAL

BASIC RATES 0.3 MATERIAL

BASIC RATES 0.3 MATERIAL

BASIC RATES 0.3 MATERIAL

BASIC RATES 0.3 MATERIAL

BASIC RATES 0.3 MATERIAL

BASIC RATES 0.3 MATERIAL

BASIC RATES 0.3 MATERIAL

sqm sqm cum cum cum cum quintal sqm

400.00 450.00 11.00 60.00 600.00 320.00 3,450.00 103.00

0978 0979 0980 0982 0983 0992 0994

BASIC RATES 0.3 MATERIAL

BASIC RATES 0.3 MATERIAL

BASIC RATES 0.3 MATERIAL

BASIC RATES 0.3 MATERIAL

BASIC RATES 0.3 MATERIAL

BASIC RATES 0.3 MATERIAL

Description 150mm dia

BASIC RATES 0.3 MATERIAL

BASIC RATES 0.3 MATERIAL

BASIC RATES 0.3 MATERIAL

BASIC RATES 0.3 MATERIAL

BASIC RATES 0.3 MATERIAL

BASIC RATES 0.3 MATERIAL

BASIC RATES 0.3 MATERIAL

S.C.I. S&S single equal 100x100x100 mm dia

BASIC RATES 0.3 MATERIAL

BASIC RATES 0.3 MATERIAL

BASIC RATES 0.3 MATERIAL

BASIC RATES 0.3 MATERIAL

BASIC RATES 0.3 MATERIAL

Description adhesive, as per IS:848-1974

BASIC RATES 0.3 MATERIAL

BASIC RATES 0.3 MATERIAL

BASIC RATES 0.3 MATERIAL

BASIC RATES 0.3 MATERIAL

BASIC RATES 0.3 MATERIAL