Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 405 views

    R Pilot - BWBPSHL

    Uploaded by

    alvipin001
    The document summarizes BWB Controls' "R-Pilot" pressure sensing device. The R-Pilot is a 3-way, pneumatic or hydraulic pilot that can be configured to detect pressure above or below an adjustable set point between 0.5-10,000 PSI. It has stainless steel materials, adjustable dead band and repeatability, and can be used between -20-250°F. The document provides ordering information examples and diagrams of piston and sleeve configurations.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    R Pilot - BWBPSHL

    Uploaded by

    alvipin001
    405 views2 pages
    The document summarizes BWB Controls' "R-Pilot" pressure sensing device. The R-Pilot is a 3-way, pneumatic or hydraulic pilot that can be configured to detect pressure above or below an adjustable set point between 0.5-10,000 PSI. It has stainless steel materials, adjustable dead band and repeatability, and can be used between -20-250°F. The document provides ordering information examples and diagrams of piston and sleeve configurations.

    Original Description:

    R pilot_BWBPSHL

    Original Title

    R pilot_BWBPSHL

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document summarizes BWB Controls' "R-Pilot" pressure sensing device. The R-Pilot is a 3-way, pneumatic or hydraulic pilot that can be configured to detect pressure above or below an adjustable set point between 0.5-10,000 PSI. It has stainless steel materials, adjustable dead band and repeatability, and can be used between -20-250°F. The document provides ordering information examples and diagrams of piston and sleeve configurations.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    405 views2 pages

    R Pilot - BWBPSHL

    Uploaded by

    alvipin001
    The document summarizes BWB Controls' "R-Pilot" pressure sensing device. The R-Pilot is a 3-way, pneumatic or hydraulic pilot that can be configured to detect pressure above or below an adjustable set point between 0.5-10,000 PSI. It has stainless steel materials, adjustable dead band and repeatability, and can be used between -20-250°F. The document provides ordering information examples and diagrams of piston and sleeve configurations.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    BWB Controls

    Telephone (985)-876-4117 info@bwbcontrols.com ISO 9001:2008 Certified

    "R" PILOT PNEUMATIC or HYDRAULIC


    OPERATION The BWB "R-PILOT" is a 3 way, normally closed or normally open, automatic, pressure sensing device. By choosing the appropriate inlet, the sensor can detect pressure above (PSH) or below (PSL) any desired pressure setting. By selecting the correct piston assembly & spring combination (See Pressure Chart), and either loosening or tightening the adjustment bolt, the sensor may be set between 0.5 and 10,000 PSI. It is normally installed on a process vessel, process flow line, or in a control panel. The sensor receives sensing pressure (Port D) from the component which it is monitoring and supply pressure (Port A or B) from the safety system which it will shutdown. FEATURES 316 STAINLESS STEEL MATERIALS 150 PSI (10.34 BAR) MAWP 1/4 FNPT CONTROL PORTS DEAD BAND +/- 5% OF SET PRESSURE SET POINT REPEATABILITY +/- 1% OF SET PRESSURE SERVICE CLASSIFICATION Standard service: Viton O-rings Temperature Range: -20 to 250 o F (-29 to 121 o C) Special service: O Ring compounds and materials to Customer Requirements BWB Controls R Pilots can be configured to meet the needs of the customer by changing the Sensing Sleeves, Sensing Pistons and Springs. Please review the charts below to determine your configuration. ORDERING INFORMATION EXAMPLE R X/X X
    SPRING COLOR SEE TABLE P PLAIN R RED W WHITE B BLUE PISTON ASSEMBLY TABLE SENSING PISTON RANGE CAPABILITY DIAPHRAGM ASSEMBLY 0.5 - 3 PSI .03 .21 bar LOW PRESSURE ASSEMBLY 3 - 10 PSI .21 .69 bar #1/2 PISTON ASSEMBLY 5 - 800 PSI .34 55 bar #2/3 PISTON ASSEMBLY 250 - 2000 PSI 17 138 bar #4/5 PISTON ASSEMBLY 2000 - 10000 PSI 138 689 bar PART # RDIA RLP R1/2P R1/2R R1/2W R1/2B R2/1W R2/1B R2/3B R3/2B R4/5B R5/4B PISTON - SPRING DIA PLAIN LP PLAIN #1/2 - PLAIN #1/2 RED #1/2 - WHITE #1/2 - BLUE #2/1 WHITE #2/1 - BLUE #2/3 - BLUE #3/2 - BLUE #4/5 - BLUE #5/4 - BLUE ADJUSTABLE RANGE 0.5 - 3 PSI .03 .21 bar 3 - 10 PSI .21 .69 bar 5 - 15 PSI .34 1.02 bar 15 - 50 PSI 1.02 3.45 bar 50 - 150 PSI 3.45 10 bar 150 - 250 PSI 10 17 bar 150 - 250 PSI 10 17 bar 250 - 800 PSI 17 55 bar 250 - 800 PSI 17 55 bar 800 - 2000 PSI 55 138 bar 2000 - 4000 PSI 138 276 bar 4000 - 10000 PSI 276 689 bar

    BASE SERIES

    PISTON ASSEMBLY SEE TABLE

    WEIGHTS R RDIA RIC 4.25 POUNDS 9.00 POUNDS 4.50 POUNDS R (PSHL) RDIF RLP 11.00 POUNDS 7.00 POUNDS 4.25 POUNDS

    PANEL MOUNT 1 - 3/8" Diameter Hole (35 mm) Maximum Panel Thickness, 0.25 Inches (6 mm) Panel Nut Thickness; 0.25 inches (6 mm)

    Designed and Manufactured using Safe Engineering Practices (SEP) in accordance with the European Pressure Directive 97/23/EC 30April2010

    BWB Controls
    INSTALLATION Telephone (985)-876-4117 info@bwbcontrols.com ISO 9001:2008 Certified

    ITEM

    PORT A

    PSH Supply Inlet (N.O.) PSL Exhaust (N.C.) 30 to 150 PSI (2.06 to 10.3 bar) 1/4 FNPT - Orifice - .125 (3.17 mm) PSL Supply Inlet (N.C.) PSH Exhaust (N.O.) 30 to 150 PSI (2.06 to 10.3 bar) 1/4 FNPT - Orifice - .125 (3.17 mm) Supply Pressure Outlet 1/4" FNPT Orifice Size - .062 (1.57 mm) Sensing Pressure Inlet 0.5 to 10000 PSI (0.03 to 689.48 bar) 1/4 FNPT and 1/2" MNPT Orifice Size - .187 (4.75 mm)

    DESCRIPTION BODY BASE ADJUSTMENT BOLT LOCK RING PANEL LOCK RING SPRING GUIDE SPRING INNER PISTON SENSING PISTON *** SENSING SLEEVE *** O RING

    PORT B

    1 2 3 4 5 6 7 8 9 10 11

    PORT C

    *** SENSING PISTON AND SLEEVE DATA IS FOUND ON THE ABOVE PAGE REPAIR KIT(S): CONTAINS ALL SEALS

    PORT D

    Please see the diagrams below of the Sleeve and Piston configurations.
    1/2 PISTON ASSEMBLY 1/2 PISTON & SLEEVE 2/1 PISTON & SLEEVE

    DIMENSIONS

    2/3 PISTON ASSEMBLY 2/3 PISTON & SLEEVE 3/2 PISTON & SLEEVE

    4/5 PISTON ASSEMBLY 4/5 PISTON & SLEEVE 5/4 PISTON & SLEEVE

    Designed and Manufactured using Safe Engineering Practices (SEP) in accordance with the European Pressure Directive 97/23/EC 30April2010

    You might also like