Er70s 6
Er70s 6
Er70s 6
H A R R I S
P R O D U C T S
G R O U P
Y
NOMINAL COMPOSITION:
Carbon Manganese Sulfur Nickel Vanadium Iron 0.06-.15% max. 1.40-1.85 % 0.035 % max. 0.15 % max. .03% max. Balance Chromium Copper Silicon Phosphorus Moybdenum Other Totals .15% max. .50% max. .80-1.15 % max. .025% max. .15% max. .50% max.
PHYSICAL PROPERTIES:
Density lbs/cu in .283
APPLICATION: Used primarily for single pass on steels where rusty and dirty surfaces are not cleaned before welding. * RECOMMENDED WELDING PARAMETERS: GMAW(MIG) Parameters (DC Reverse Polarity) Electrode Positive Spray transfer Wire Diameter .023 .030 .035 .045 1/16 3/32 Amps 85-170 135-230 165-300 200-375 275-500 300-600 Volts 23-27 24-28 24-28 24-30 24-32 24-33 Argon/1/5% O2 25 25 30 30-35 40 50 Wire Feed ipm 360-620 390-670 360-520 210-360 150-360 75-125
All statements, information and data given are believed to be accurate and reliable but are presented without guarantee, warranty or responsibility of any kind, expressed or implied. Additional information available at our web site: www.harrisproductsgroup.com
3/08 MK
1
* All parameters are suggested as basic guidelines and will vary depending on joint design number of passes , and other factors . SPECIFICATION COMPLIANCE: AISI/AWS A5.18 & ASME SFA 5.18 ER 70S-6 WARNING: PROTECT yourself and others. Read and understand this information. FUMES AND GASES can be hazardous to your health. ARC RAYS can injure eyes and burn skin. ELECTRIC SHOCK can KILL.
Before use, read and understand the manufacturers instructions, Material Safety Data Sheets (MSDSs), and your employer's safety practices. Keep your head out of fumes. Use enough ventilation, exhaust at the arc, or both, to keep fumes and gases from your breathing zone and the general area. Wear correct eye, ear, and body protection. Do not touch live electrical parts. See American National Standard Z49.1, Safety in Welding, Cutting, and Allied Processes, published by the American Welding Society, 550 N.W. LeJeune Road, Miami, Florida 33126; OSHA Safety and Health Standards, available from the U.S. Government Office, Washington, DC 20402
All statements, information and data given are believed to be accurate and reliable but are presented without guarantee, warranty or responsibility of any kind, expressed or implied. Additional information available at our web site: www.harrisproductsgroup.com
3/08 MK 2