Taper/Taper joint

Fittings & Flanges for

pipe series 2420 and 3420
using the Taper/Taper adhesive-bonded joint

Description

Bondstrand Taper-Taper fittings & flanges are glassfiber reinforced filament-wound epoxy
pipe fittings in diameters 50 through 1000 mm (2-40 inch) designed to be used with
Bondstrand pipes. Pipe is standard with integral Taper-Taper spigot and socket ends for
adhesive bonding or with integral Key-Lock male and female ends for mechanical joining.
Fittings are filament-wound with integral taper socket ends. Pipes and fittings are
available in several pressure classes from 10 bar upwards.

Uses and Application

For intended services and performance capabilities refer to product data sheet FP 452 and
FP 158 pertaining to Bondstrand Series 2400 and 3400 pipe data.

Design and Installation

For recommendations pertaining to design, installation and use of Bondstrand Pipe,

Fittings and Flanges reference is made to the following literature:
FP 564
FP 161
FP 453

Assembly Instructions for Taper-Taper adhesive bonded joints.

Installation Instructions using the Key-Lock mechanical joint.
M86 Pipe Shaver operating instructions for Taper-Taper joints in sizes
50 to 150 mm (2-6 inch).
FP 454
M87 Pipe Shaver operating instructions for Taper-Taper joints in sizes
150 to 400 mm (6-16 inch).
FP 455
M87XL Pipe Shaver operating instructions for Taper-Taper joints in
sizes 400 to 600 mm (16-24 inch).
FP 643
M95 Pipe Shaver operating instructions for Taper-Taper joints in sizes
600 to 1000 mm (24-40 inch).
FP 196
Flange Assembly Instructions.
FP 132
Corrosion Guide.
General Bondstrand engineering and installation guides.

How to use this product

data sheet

Dimensional data for Taper-Taper adhesive bonded fittings are contained in individual
dimensional sheets per pressure class:
FP No.

Fitting

Pipe System

Pressure

549-10
549-12
549-14
549-16
549-20
549-25
549-32
549-40
549-50

T-10
T-12
T-14
T-16
T-20
T-25
T-32
T-40
T-50

2410 and 3410

2412 and 3412
2414 and 3414
2416 and 3416
2420 and 3420
2425 and 3425
2432 and 3432
2440 and 3440
2450 and 3450

10 bar
12 bar
14 bar
16 bar
20 bar
25 bar
32 bar
40 bar
50 bar

Ameron 1998 FP657-20 (8/98). Printed in The Netherlands. Page 1 of 12.

Dimensions of the
taper-taper joint

Nominal Pipe Size

mm
50
80
100
150
200
250
300
350
400
450
500
600
700

Quantity of Adhesive

inch
2
3
4
6
8
10
12
14
16
18
20
24
28

Taper
Angle

degrees
1.75
1.75
1.75
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
1.75

Nominal
Pipe Size
mm
50
80
100
150
200
250
300
350
400
450
500
600
700

Insertion
Depth
Ds
mm
50
50
50
80
80
110
140
140
170
170
200
230
290

Adhesive
Kit Size
inch
2
3
4
6
8
10
12
14
16
18
20
24
28

cm3
89
89
89
89
177
177
177
177
177
177
177
177
177

Spigot
Nose
Thickness
t
mm
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.5
1.5
1.5
2.0
2.5
5.5

Spigot
Diameter
at Nose
mm
55.2
83.8
107.2
161.0
210.8
264.9
315.7
347.4
396.7
436.8
486.1
583.6
711.0

Minimum number of
adhesive kits per joint
fluid
ounce
3
3
3
3
6
6
6
6
6
6
6
6
6

Note:
Adhesive kits should never be split. If remainder is not used for other joints made at the
same time, the surplus must be discarded.

FP657-20 Fittings & Flanges for 2420/3420.Page 2 of 12.

nr.
0.2
0.2
0.4
0.8
1.0
1.0
2.0
2.0
3.0
3.0
3.0
5.0
7.0

Elbows 90

Filament-wound 90 elbows with integral Taper-Taper adhesive bonded socket ends

Nominal Pipe Size
Laying
Overall
Insertion
Weight
Length
Length
Depth
L
OL
Ds
mm
inch
mm
mm
mm
kg
50
2
87
137
50
0.6
80
3
126
176
50
1.1
100
4
155
205
50
2.1
150
6
240
320
80
5.8
200
8
315
395
80
12.0
250
10
391
501
110
16.1
300
12
463
603
140
26.0
350
14
364
504
140
37.0
400
16
402
572
170
53.0
450
18
472
642
170
76.0
500
20
523
723
200
125.0
600
24
625
855
230
228.0
700
28
726
1016
290
293.0

Elbows 45

Filament-wound 45 elbows with integral Taper-Taper adhesive bonded socket ends

Nominal Pipe Size
Laying
Overall
Insertion
Weight
Length
Length
Depth
L
OL
Ds
mm
inch
mm
mm
mm
kg
50
2
45
95
50
0.5
80
3
61
111
50
0.9
100
4
73
123
50
1.3
150
6
106
186
80
3.9
200
8
137
217
80
7.4
250
10
169
279
110
12.4
300
12
196
336
140
22.0
350
14
125
265
140
29.0
400
16
142
312
170
41.0
450
18
204
374
170
54.0
500
20
225
425
200
75.0
600
24
268
498
230
130.0
700
28
310
600
290
229.0

FP657-20 Fittings & Flanges for 2420/3420. Page 3 of 12.

Elbows 221/2

Filament-wound 221/2 elbows with integral Taper-Taper adhesive bonded socket ends
Nominal Pipe Size
Laying
Overall
Insertion
Weight
Length
Length
Depth
L
OL
Ds
mm
inch
mm
mm
mm
kg
50
2
29
79
50
0.4
80
3
37
87
50
0.6
100
4
43
93
50
0.9
150
6
60
140
80
2.8
200
8
76
156
80
5.1
250
10
68
178
110
9.7
300
12
77
217
140
15.5
350
14
71
211
140
21.0
400
16
85
255
170
24.0
450
18
106
276
170
39.0
500
20
116
316
200
56.0
600
24
136
366
230
93.0
700
28
157
447
290
173.0

Tees

Filament-wound tees with integral Taper-Taper adhesive bonded socket ends

Nominal Pipe Size
Laying
Overall
Laying
Overall
Insertion
Weight
Length
Length
Length
Length
Depth
total
total
branch
branch
run
run
L1
OL1
L2
OL2
Ds
mm
inch
mm
mm
mm
mm
mm
kg
50
2
148
248
74
124
50
1.3
80
3
192
292
96
146
50
2.9
100
4
230
330
115
165
50
4.0
150
6
306
466
153
233
80
11.9
200
8
376
536
188
268
80
21.0
250
10
452
672
226
336
110
21.0
300
12
528
808
264
404
140
50.0
350
14
544
824
272
412
140
55.0
400
16
590
930
295
465
170
87.0
450
18
678
1018
339
509
170
103.0
500
20
740
1140
370
570
200
209.0
600
24
868
1328
434
664
230
351.0
700
28
994
1574
497
787
290
599.0

FP657-20 Fittings & Flanges for 2420/3420.Page 4 of 12.

Reducing Tees

Filament-wound reducing tees with integral Taper-Taper adhesive bonded socket ends
Nominal Pipe Size
Laying Overall Insertion Laying Overall Insertion Weight
Length Length Depth Length Length Depth
half
half
run
branch branch branch
run x run x branch
run
run
L1
OL1
Ds1
L2
OL2
Ds2
mm
inch
mm
mm
mm
mm
mm
mm
kg
80x80x50
3x3x2
96
146
50
86
136
50
2.7
100x100x50
4x4x2
115
165
50
99
149
50
3.8
100x100x80
4x4x3
115
165
50
108
158
50
4.0
150x150x50
6x6x2
153
233
80
124
174
50
10.9
150x150x80
6x6x3
153
233
80
134
184
50
12.0
150x150x100 6x6x4
153
233
80
140
190
50
12.2
200x200x80
8x8x3
188
268
80
159
209
50
16.0
200x200x100 8x8x4
188
268
80
172
222
50
16.7
200x200x150 8x8x6
188
268
80
178
258
80
17.9
250x250x100 10x10x4
226
336
110
194
244
50
29.0
250x250x150 10x10x6
226
336
110
204
284
80
32.0
250x250x200 10x10x8
226
336
110
213
293
80
34.0
300x300x100 12x12x4
264
404
140
216
266
50
43.0
300x300x150 12x12x6
264
404
140
229
309
80
44.0
300x300x200 12x12x8
264
404
140
239
319
80
45.0
300x300x250 12x12x10 264
404
140
251
361
110
51.0
350x350x150 14x14x6
272
412
140
254
334
80
42.0
350x350x200 14x14x8
272
412
140
264
344
80
54.0
350x350x250 14x14x10 272
412
140
277
387
110
62.0
350x350x300 14x14x12 272
412
140
289
429
140
66.0
400x400x150 16x16x6
295
465
170
274
354
80
55.0
400x400x200 16x16x8
295
465
170
283
363
80
56.0
400x400x250 16x16x10 295
465
170
293
403
110
63.0
400x400x300 16x16x12 295
465
170
305
445
140
67.0
400x400x350 16x16x14 295
465
170
315
455
140
71.0
450x450x200 18x18x8
339
509
170
316
396
80
100.0
450x450x250 18x18x10 339
509
170
329
439
110
104.0
450x450x300 18x18x12 339
509
170
329
469
140
107.0
450x450x350 18x18x14 339
509
170
330
470
140
137.0
450x450x400 18x18x16 339
509
170
330
500
170
143.0
500x500x250 20x20x10 370
570
200
355
465
110
180.0
500x500x300 20x20x12 370
570
200
355
495
140
186.0
500x500x350 20x20x14 370
570
200
356
496
140
188.0
500x500x400 20x20x16 370
570
200
356
526
170
195.0
500x500x450 20x20x18 370
570
200
365
535
170
200.0
600x600x300 24x24x12 434
664
230
405
545
140
211.0
600x600x350 24x24x14 434
664
230
406
546
140
281.0
600x600x400 24x24x16 434
664
230
406
576
170
220.0
600x600x450 24x24x18 434
664
230
428
598
170
239.0
600x600x500 24x24x20 434
664
230
428
628
200
279.0
700x700x400 28x28x16 497
787
290
483
653
170
520.0
700x700x450 28x28x18 497
787
290
483
653
170
525.0
700x700x500 28x28x20 497
787
290
491
691
200
539.0
700x700x600 28x28x24 497
787
290
491
721
230
560.0

FP657-20 Fittings & Flanges for 2420/3420. Page 5 of 12.

Concentric Reducers

Filament-wound concentric reducers with integral Taper-Taper adhesive bonded

socket ends
Nominal Pipe Size
Laying
Overall
Overall
Insertion
Weight
Length
Length
Length
Depth
L
OL
Ds1
Ds2
mm
inch
mm
mm
mm
mm
kg
80x50
3x2
74
174
50
50
0.8
100x50
4x2
96
196
50
50
1.1
100x80
4x3
94
194
50
50
1.3
150x80
6x3
117
247
80
50
2.2
150x100
6x4
124
254
80
50
2.4
200x100
8x4
163
293
80
50
4.3
200x150
8x6
129
289
80
80
5.1
250x150
10x6
148
338
110
80
6.8
250x200
10x8
135
325
110
80
6.9
300x200
12x8
180
400
140
80
9.9
300x250
12x10
167
417
140
110
10.8
350x250
14x10
214
464
140
110
17.0
350x300
14x12
208
488
140
140
16.8
400x300
16x12
195
505
170
140
22.0
400x350
16x14
183
493
170
140
23.0
450x400
18x16
128
468
170
170
27.0
500x400
20x16
249
619
200
170
36.0
500x450
20x18
151
521
200
170
35.0
600x400
24x16
486
886
230
170
70.0
600x450
24x18
388
788
230
170
70.0
600x500
24x20
267
697
230
200
70.0
700x400
28x16
796
1256
290
170
180.0
700x450
28x18
698
1158
290
170
156.0
700x500
28x20
577
1067
290
200
181.0
700x600
28x24
340
860
290
230
132.0
Note: Eccentric Reducers are available on request

FP657-20 Fittings & Flanges for 2420/3420.Page 6 of 12.

Couplings

Filament-wound couplings with integral Taper-Taper adhesive bonded socket ends

Nominal Pipe Size
Laying
Overall
Insertion
Outside
Weight
Length
Length
Depth
Diameter
L
OL
Ds
OD
mm
inch
mm
mm
mm
mm
kg
50
2
70
170
50
70
0.4
80
3
70
170
50
100
0.7
100
4
70
170
50
124
0.9
150
6
70
230
80
180
1.9
200
8
70
230
80
230
2.5
250
10
70
290
110
286
4.0
300
12
70
350
140
350
9.8
350
14
70
350
140
381
10.5
400
16
70
410
170
430
13.2
450
18
70
410
170
460
9.0
500
20
70
470
200
524
21.0
600
24
70
530
230
619
24.0
700
28
70
650
290
745
35.0

Nipples

Filament-wound pipe nipples with integral Taper-Taper adhesive bonded spigot ends
Nominal Pipe Size
Laying
gap
Insertion
Weight
Lenght
Depth
L
Ds
mm
inch
mm
mm
mm
kg
50
2
125
25
50
0.1
80
3
125
25
50
0.1
100
4
125
25
50
0.1
150
6
185
25
80
0.5
200
8
190
30
80
0.7
250
10
250
30
110
1.4
300
12
320
40
140
2.5
350
14
320
40
140
3.1
400
16
380
40
170
4.8
450
18
400
60
170
5.8
500
20
460
60
200
8.7
600
24
520
60
230
13.9
700
28
640
60
290
27.0

FP657-20 Fittings & Flanges for 2420/3420. Page 7 of 12.

Heavy-Duty Flanges

Heavy-Duty filament-wound flanges with Taper-Taper adhesive bonded socket ends

Nominal Pipe Size
Laying
Overal
Insertion
Weight
Length
Length
Depth
L
D
Ds
(1)
mm
inch
mm
mm
mm
kg
50
2
5
55
50
1.5
80
3
5
55
50
2.2
100
4
5
55
50
2.9
150
6
5
85
80
5.8
200
8
6
86
80
8.4
250
10
6
116
110
14.3
300
12
6
146
140
26.0
350
14
6
146
140
33.0
400
16
6
176
170
46.0
450
18
6
176
170
49.0
Notes:
(1)
The weights shown are for ANSI B16.5 Class 150 drilled flanges. Weights for other
drilling classes may be different. For more detailed information reference is made to
the appropriate product data.
*
**

***

FP657-20 Fittings & Flanges for 2420/3420.Page 8 of 12.

Heavy Duty Flanges are standard available in drillings according to ANSI and ISO
(DIN).
Full-face elastomeric gaskets may be used, suitable for the service pressure, service
temperature and fluid. Shore A durometer hardness of 60 5 is recommended and a
thickness of 3 mm.
Compressed fibre gaskets, 3 mm thick, compatible with the pressure, temperature
and medium, may also be used. The mechanical properties should be in accordance
with DIN 3754 (IT 400) or equal.
For maximum bolt torque refer to the appropriate Bondstrand literature. Please be
aware that excessive torque may result in flange failure and, therefore a torquewrench is required.

Stub-end Flanges

Filament-wound Stub-end flanges with Taper-Taper adhesive bonded socket ends

and steel backing rings
Nominal Pipe Size
Laying
Overall
Insertion
Ring
Weigth
Weight
Length
Length
Depth
to
GRE
steel
Face
stubring
L
OL
Ds
H
end
(1)
mm
inch
mm
mm
mm
mm
kg
kg
50
2
15
65
50
10
0.2
1.8
80
3
15
65
50
10
0.5
3.2
100
4
15
65
50
12
0.8
4.2
150
6
15
95
80
16
1.8
5.2
200
8
15
95
80
20
2.6
8.5
250
10
15
125
110
23
4.0
13.5
300
12
15
155
140
26
5.9
23.0
350
14
15
155
140
27
5.8
32.0
400
16
20
190
170
32
9.6
42.0
450
18
20
190
170
35
16.1
40.0
500
20
20
220
200
39
19.8
51.0
600
24
20
250
230
47
22
86.0
700
28
20
310
290
51
29
100.0
Notes:
(1)
The weight shown is for ANSI B16.5 Class 150 drilled flanges. Weights for other
drilling classes may be different. For more detailed information reference is made to
the appropriate product data.
*
**

***
****

Stub-End Flange Rings are standard available in drillings according to ANSI and ISO
(DIN).
Stub-End Flanges are available with and without O-ring groove in the face.
Up to 10 bar stub-ends without grooves can be used with flat elastomeric or
compressed fibre gaskets.
For pressures 12 bar and above suitable O-ring seals should be used, available on
request.
Make sure that the O-ring grooved stub-end is compatible with its counter flange,
e.g. use a stub-end without groove or another flat surface flange as counter flange.
Maximum bolt-torque for use with O-rings seals may be calculated based on
pressure, size and number of bolts. If using flat face gaskets (maximum pressure 10
bar) refer to the appropriate Bondstrand literature for hubbed flanges.

FP657-20 Fittings & Flanges for 2420/3420. Page 9 of 12.

Key-lock Adapters
& Couplings

Filament around adapters and couplings with Key-lock ends.

Nominal Pipe
Qty
Laying Overall Insertion Weigth Laying Overall Weigth
Size
of
Length Length Depth
Length Length
Keys
L
OL
Ds
L
OL
mm
inch
mm
mm
mm
kg
mm
mm
kg
adapter KLM x TBF
coupling KLF x KLF
50
2
1
5
100
50
0.3
100
140
0.8
80
3
1
5
100
50
0.5
100
140
1.0
100
4
1
5
100
50
0.7
100
140
2.2
150
6
1
4
140
80
1.3
127
181
4.3
200
8
1
2
150
80
1.9
152
225
6.3
250
10
1
3
185
110
3.1
163
242
9.6
300
12
2
60
285
140
6.7
186
386
25.0
350
14
2
73
300
140
10.7
191
403
29.0
400
16
2
80
340
170
10.2
197
426
38.0
450
18
2
61
325
170
16.5
204
392
27.0
500
20
2
83
380
200
21.0
210
409
32.0
600
24
2
98
450
230
33.0
261
519
71.0

Field Testing

Pipe system is designed for field testing with water at 150% of rated pressure.

Surge Pressure

Maximum allowable surge pressure is 150% of rated pressure.

Conversions

1 psi
1 bar
1 MPa
1 inch
1 Btu.in/ft2hF
C

Important Notice

FP657-20 Fittings & Flanges for 2420/3420.Page 10 of 12.

= 6895 Pa
= 0.07031 kg/cm2
= 105Pa
= 14.5 psi
= 1 N/mm2
= 145 psi
= 25.4 mm
= 0.1442 W/mK
= 5/9 (F-32)

= 1.02 kg/cm2
= 10.2 kg/cm2

This product literature and the recommendations for usage it contains are based on test data
reasonably believed to be reliable. It is intended that this literature be used by personnel
having specialised training in accordance with currently accepted industry practice and
normal operating conditions. Variation in environment, changes in operating procedures, or
extrapolation of data may cause unsatisfactory results. We recommend that your engineers
verify the suitability of this product for your intended application. Since we have no control
over the conditions of service, we expressly disclaim responsibility for the results obtained
or for any consequential or incidental damages of any kind incurred.

FP657-20 Fittings & Flanges for 2420/3420. Page 11 of 12.

Fiberglass-Composite
Pipe Group
Headquarters
P.O. Box 801148
Houston TX 77280
U.S.A.
Phone: (+1) 713 690 7777
Fax: (+1) 713 690 2842
Internet:www.ameron.com
email:marcom@ameronfpd.com

Fiberglass-Composite
Pipe Group
The Americas
P.O. Box 878
Burkburnett, Texas 76364
U.S.A.
Phone: (+1) 940 569 1471
Fax: (+1) 940 569 2764

Fiberglass-Composite
Pipe Group
Europe
Ameron B.V.
P.O. Box 6
4190 CA Geldermalsen
The Netherlands
Phone: (+31) 345 587 587
Fax: (+31) 345 587 561
internet: www.ameron-fpg.nl
email: info@ameron-fpg.n

Fiberglass-Composite
Pipe Group
Asia
Ameron (Pte) Ltd
No. 7A, Tuas Avenue 3
Jurong
Singapore 639407
Phone: (+65) 6861 6118
Fax: (+65) 6862 1302/6861 7834
internet: www.ameron.com.sg
email: info@ameron.com.sg