CPK

Product Introduction
0052 .10 / 01 - 18 G3 CPK
Family Curves
n =2900 rpm. n = 1450 rpm. Standardized Chemical Pumps
200 200 Designed to DIN 24256/ISO 2858/ISO 5199
250-710 300- 350- 400-
710 710 710
200-670
100
250-630 300- 350- 400-
50-315 630 630 630
40-315 65-315 80-315 100-315
100 200-
150-500 500 250-500
300- 350- 400-
50 500 500 504
32-250 40-250 50-250 65-250 80-250 80-400 100- 125-400 150-400 200-400
40 400
100-250 250-
400 300-
30 400 350-
40 -315 50 -315 65 -315 80 -315 100-315 125- 400 400-

H(m)
50 315 506
25-200 32-200 40-200 50-200 65-200 80-200
H (m)

150-315 200-315
20 250-
40 100-200 32 -250 40 -250 50 -250 65 -250 80-250 100- 125- 315
250 250

150-250 200-
30 250
25 -200 32 -200 40 -200 50 -200 65 -200 80 -200
25-160 32-160 40-160 50-160 65-160 80-160 10 100-200
EN ISO 9001/2
25 -160 32 -160 40 -160 50 -160 65 -160 80 -160
20
5
32-125
4

10
2
0.5 1 Q I/s 2 3 4 5 10 20 30 40 50 100 140 0.3 0.4 0.5 1 Q l /s 2 3 4 5 10 20 30 40 50 100 200 300 400 500 1000
2 3 4 5 10 20 30 40 50 100 200 300 400 500 2 3 4 5 10 20 30 40 50 100 200 300 400 500 1000 2000 3000

3 3
Q m /hr Qm / hr

Materials
CPK pumps can be offered in Cast Iron (G), Cast Steel (E) & Stainless Steel (C) metallurgy

Standard Material Execution *

Part Designation
G E C
Applications Pressure and Temperature limits
Volute Casing CI Gr. FG260 WCB CF 8 M
Casing Cover CI Gr. FG260 WCB CF 8 M For handling aggresive organic & inorganic fluids in the Materials C and E
Impeller CI Gr. FG260 WCB CF 8 M chemical & petrochemical industries. These pumps are also 25
Impeller Nut CI Gr. FG260 CF 8 M CF 8 M used at Refinery off-sites, Paper & Pulp Industry, Food

Max. Pump discharge pressure bar

Shaft C 45 TYPE 431 AISI 329 Industry, Sugar Industry, Seawater desalination plants, CPK E
20
Shaft Protection Sleeve Type 316 TYPE 316 TYPE 316 absorption plants in environmental engineering, Power
Bearing Bracker CI Gr. FG260 CI Gr. FG260 CI Gr. FG260 stations etc. 15
Bearing Bracket Lantern CI Gr. FG260 CI Gr. FG260 CI Gr. FG260
CPK C
10
* Other executions available on request, depending upon application. Design
5
Horizontal, radially split, volute casing pumps in back pull-
Manufactured in technical collaboration with KSB Aktiengesellschaft., Germany by : out design, fitted with a radial impeller, single entry, single 0
PUMPS LIMITED stage & designed in accordance with DIN 24256/ISO -70 -40 0 40 80 120 160 200 240 280 320 350
2858/ISO 5199. Product temperature in ºC
Works Telephone No. Fax
Pimpri - Irrigation and Process Division, Mumbai-Pune Road, Pune - 411 018 (020) 7101000 (020) 7426000
Chinchwad - Power Projects Division, D - II Block, MIDC, Pune - 411 019 (020) 747882-3 (020)7470890 Designation
Coimbatore - Valves Division, 151, NSN Palayam Post, Mettupalayam Road - 641 031 (0422) 700547-9 (0422) 700650
Vambori - Foundry Division, Ahmednagar- 413 704 (02426) 72528, 34, 72074 (02426) 72043
Sinnar - Water Pumps Division, Plot No E-3, MIDC Sinnar, Malegaon, Dist. Nashik- 422 103 (02551) 30252, 53, 30255, 30256 (02551) 30254 CPK E m 40 - 200
Regd. Office:
Material G
Mumbai - 126, Maker Chambers III, Nariman Point - 400 021 (022) 2285 4237 - 42 (022) 2287 3299 Pump Type 20

Material of construction

Max. Pump discharge pressure bar

Zonal Offices:
Chennai - Guindy House, 2nd Floor, 95, Anna Salai - 600 032 (044) 22352571 - 2, 2230 0629 (044) 2235 2749
Kolkata - 30, Circus Avenue, 2nd Floor - 700 017 (033) 2247 0473, 2240 0117 (033) 2247 0588 Mechanical seal 15
Technical matter. Subject to change without notice.

Mumbai - 126, Maker Chambers III, Nariman Point - 400 021 (022) 2285 4237 - 42 (022) 2287 3299
NOIDA - "KSB House", A-96, Sector IV, NOIDA 201 301, Dist. Gautam Budh Nagar, U. P. (0120) 24541091 - 2, 24541502-3 (0120) 2452 5627
Discharge nozzle size in mm
Branch Offices: 10
l Ahmedabad - (079) 7540428, 7543427 l Aurangabad - (0240) 2351440 l Bangalore - (080) 3491806, 3493925 l Baroda - (0265) 233 0532, 233 3226 l Bareilly - (0581) 530748 Nom. Imp. dia in mm
l Bhubaneswar - (0674) 563497 l Chandigarh - (0172) 549021 l Hubli - (0836) 251057 l Indore - (0731) 529478, 529704 l Jaipur - (0141) 224554, 224904
l Jamshedpur - (0657) 431408, 433471 l Lucknow - (0522) 635203, 635597 l Nagpur - (0712) 223 6889 l Patna - (0612) 222628 l Pune- (020) 5536345,5536347
5
l Raipur - (0771) 520758 l Secunderabad - (040) 7001724, 7003696
Operating Data
Service Stations :
Odhav
NOIDA
-
-
Shed 22, G.V.M. Estate, Ahmedabad - 382 410
"KSB House" A- 96, Sector IV, 201 301
(079) 2287 0372
(0120) 4591091-93, 4541501-03
Pump Sizes DN 32 to 250 mm 0
Howrah - 142, Foreshore Road, Ramkrishnapur (033) 2660 2909 Capacity Q up to 1200 m3/hr -10 0 40 80 120 160 200 240 280
Chennai - No. 4 (old no. 18) Chakrapani Road, Guindy, 32 (044) 2255 0704
Head H up to 150 m Product temperature in ºC
Pressure P up to 25 bar
Temperature t -70ºC to +350ºC

YRAS 04-2003/3000
 CPK

Flanges Jack-bolts Casing cover Rotor and bearing Optional features

according to ANSI B 16.5 for easy dismantling cooling or heating possible. rated for a shaft deflection
class 150 & 300 below,0.05 mm and a bearing
life of more than 17,500
operating hours.

Shaft sealing chamber,

intensively cooled ( `Y' stuffing box )

Pressure retaining parts

safe design by computerised
strength analysis and quality
casting with corrosion allowance

Casing and impeller

wear rings
CPK-G - only casing wear ring
CPK-E/C - No wear ring

Heavy Bearing Bracket

for intensive loading

Impeller Nut
with helicoil for
protection of threads

Heavy Bearing Bracket

Shaft with cooling arrangement.
Dry shaft. No contact with
medium handled ( due to
confined sealing gaskets )
hence no need for
special material

Standard units
fast delivery and
small stock of spare parts
ensured

Back pull-out design Constant level oiler Mechanical Seal : Single balanced
when dismantling the pump, Volute Gland packing guarantees constant lubrication
with low radial forces ( double subsequent fitment of standard ( Double and Tandem seals also available )
the casing can remain in the of the bearings and control
pipeline volute available, depending on size) mechanical seal is possible of oil level.