Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Acc 5100 00012 01

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

N FABRICATION MATERIALS

PT PMRC PART & DESCRIPTION SIZE QTY


NO. (DN)
2 __ ____________ __________________________________ ______ ___
EL +108540
SEE ISO 1 PAATFPZBEEX2A3K Pipe, ASME B36.10M, BE, ASTM A106-B, Seamless, 50 1.2 M
ACC-5100-00010-01 S-80
E 5720904 2 NCAFKRBEAN2A3K 90 Deg. LR Elbow, ASME B16.9, BE, ASTM 50 3
N 4049213 A234-WPB, Seamless, S-80XS-80
EL +108540 3 FLALDCERFZZ2A3K WN Flg., ASME B16.5, CL 150, RFFE, ASTM A105, 50 2
26 S-80
5
PIPE SUPPORTS
1
4
50 4 LS12-2"-292-CS-S40 Pipe Support 50 1
NP
D

ERECTION MATERIALS

PT PMRC PART & DESCRIPTION SIZE QTY


NO. (DN)
F3 G5 B6 __ ____________ __________________________________ ______ ___

5 GEASDUERFDJ2A0D Spiral Wound Gskt, ASME B16.20, CL 150, RF, 50 2


5100PSV
AISI 316, ASME B16.5, Graphite CS
2701
Centring-/SS Inner Ring, WT 4.5 mm

1
50X25NPD 6 BAAAAAZZ0G0U Std Blt & 2 Hex Nut, BS 4882, ASTM A193-B7 5/8 8
Bolts/Studs/ASTM A194-2H Nuts - 90 mm
Length

798

2
EL +107742

50NPD

140
F3 G5 B6 5
2
56
CONN TO
5100-T-507/A2
1 50 MM RFFE 150
E 5720635
N 4049775
EL +107598

S4
LS12-2"-292-CS-S40

+Y 50-ACC-5100-00012-1C136CQ-N 50.00 mm 1C136CQ 0 mm


MY
LINE NUMBER SIZE LINE SPEC. INSUL INSUL.THK
SERVICE: ACC CODE: B31.3
OPERATING DESIGN Barg 0.00 C 28
3.50 75
MZ MX SPRING SPRING ANCHOR VERTICAL LINESTOP GUIDE HOLD DOWN HOLD DOWN OWNER : PROJECT TITLE:
+Z +X HANGER REST HANGER SUPPORT GUIDE GUIDE & LINESTOP SUPPORT
PETRONAS RAPID PROJECT, PENGERANG
:
NOTES: 8) FOR ALL SMALL BORE TAPPINGS 600# & ABOVE, SMALL BORE TAPPING
NEAR PSV'S, CONTROL VALVE, ALL ORIFICE TAPPING VIBRATION PRONE ( P0022 )
1) ALL DIMENSIONS, ELEVATIONS & CO-ORDINATES ARE IN MM. LINES, STIFFNERS SHALL BE PROVIDED AS PER SITE, REFER PIPE
2) FIELD WELDS TO BE DECIDED BY THE FABRICATOR/CONTRACTOR. SUPPORT NO. RAPID-P0022-PUNJ-PIP-STD-5100-1003. P&ID REF: 0 JRK ISOMETRIC LINE ID:
3) ALL BOLT HOLES TO STRADDLE NORTH AND/OR VERTICAL CENTERLINE. 9) FOR LINES REQUIRING STRESS RELEIVING, WELDED SUPPORT ISSUED FOR CONSTRUCTION 27-MAY-17 PTK RNP USA PPS
4) DIMENSIONS FOR LINES 1-1/2" AND BELOW TO BE CHECKED AT SITE BEFORE ATTACHMENTS SHALL BE WELDED PRIOR TO STRESS RELEIVING. ACC-5100-00012-01
FABRICATION, DIMENSIONS ARE FOR GUIDANCE ONLY. 10) PAINTING SPECIFICATIONS SHALL BE AS PER DOC NO. 5100-0027
5) ALL ELEVATIONS QUOTED ARE PIPE CENTER LINE/FACE OF FLANGE.
6) SPRING LOCKS TO BE RELEASED POST HYDROTEST.
RAPID-P0022-PUNJ-MCI-SPN-5100-0001.
REV DESCRIPTION DATE DRAWN STRESS MATL CHKD APPD CONTRACTOR :
11) INSULATION SPECIFICATION SHALL BE AS PER DOC NO.
JOB NO : PD5026 DWG NO : RAPID-P0022-PUNJ-PIP-ISO- 5100- 4015
Punj Lloyd
7) FOR REINFORCEMENT PAD AT BRANCHES, PAD THICKNESS - SAME AS HEADER RAPID-P0022-PUNJ-MCI-SPN-5100-0002.
PIPE, PAD OD - TWO TIMES DIAMETER OF PIPE UNLESS OTHERWISE MENTIONED. 12) IF MIS-MATCH FOUND BETWEEN DESIGN PARAMETERS OF ISOMETRIC & STRESS CATEGORY PAINTING SYSTEM: PWHT: RADIOGRAPH: TEST TYPE: H
LINE LIST, THEN LINE LIST TO BE CONSIDERED AS FINAL DOCUMENT.
3 1A NO 5%. TEST PRESSURE: 24.00 barg Barg AREA : 5100 UNIT : 5100 SHT. NO. 1 OF 1 REV. NO. 0
Extraction Date : 5/27/2017

You might also like