ANSYS Academic R13.0

ANSYS Academic Products R13.
0 New Features / Update
11/15/2010 Paul Lethbridge

2010 ANSYS, Inc. All rights reserved.
11
ANSYS, Inc. Proprietary
13.0 ANSYS Academic Portfolio

Product/Family ACADEMIC ASSOCIATE ANSYS Academic Associate ANSYS Academic Associate CFD ANSYS Academic Associate HPC ACADEMIC RESEARCH ANSYS Academic Research ANSYS Academic Research Mechanical ANSYS Academic Research CFD ANSYS Academic Research AUTODYN
ANSYS Academic Research Electronics Thermal
Task variants available 1,5 1,5 1 1,5,25 1,5,25 1,5,25 1,5,25

1,5,25
ANSYS Academic Research Offshore/Marine ANSYS Academic Research POLYFLOW ANSYS Academic Research HPC ANSYS Academic Research LS-DYNA ANSYS Academic Research LS-DYNA HPC ACADEMIC TEACHING ANSYS Academic Teaching Advanced ANSYS Academic Teaching Introductory ANSYS Academic Teaching Mechanical ANSYS Academic Teaching CFD ACADEMIC STUDENT ANSYS ED (Release 10.0) ACADEMIC TOOLBOX ANSYS Academic Meshing Tools ANSYS Academic CFD Turbo Tools
1,5 1,5,25 1 25 1 5,25,50 5,25,50 5,25,50 5,25,50 1 1,5,25 1,5,25 1,5,25
ANSYS Academic Fuel Cell Tools
Whats New @ 13.0 for Academic Products
There are no new academic product variants introduced! The ANSYS Academic products have been enhanced with the addition of the following features: ANSYS Extended Meshing
TGrid stand alone New meshing methods:
Tools
Note 3rd party export only available with ANSYS Academic Meshing CutCell BFCart
New at 13.0
New Mechanical elements:

ANSYS Mechanical.
GPU enabled for academic products that contain

FLUID220, FLUID221,SURF159, REINF263 HSFLD241, HSFLD242, SOLID278, SOLID279
Commercial Changes with No impact on Academic bundles!
Rigid Body Dynamics: Kinematics & Dynamics remains available in all ANSYS
Academic products that contain ANSYS Mechanical (or higher). POLYFLOW The commercial change to the blowmolding & extrusion templates do not impact academic users as both templates are bundled into the academic POLYFLOW product. ICEPAK The ICEPAK CFD PrepPost change doesnt impact academic users, as we already bundle ANSYS CFD PrepPost into the academic bundle.
New at 13.0
Commercial changes that impact academic bundles!
Mechanical APDL Launcher: In order to simplify &
consolidate our users experience the MAPDL launcher has been cleaned up as follows: The LSF settings in the launcher have been removed. The MFX options in the launcher have been removed.
Basically, alternative, better launch methods exist!
Most MFX customer use the CFX solver launcher or the command line.
New at 13.0
Whats New @ 13.0 for Academic Products

In the name of simplification we have removed the academic/commercial preferences setting.
Radio button to select commercial or academic
Extended Meshing & TGrid
ANSYS Extended Meshing:
Enabled for all ANSYS Academic products that contain ANSYS Meshing Application. Academic Capability:
Meshing.
Standalone use of ICEM CFD or TGrid Interactive use of ICEM CFD or TGrid batch methods within ANSYS
Note 3rd party export only available with ANSYS Academic Meshing
TGrid
Tools.
Enabled within the ANSYS Meshing Application for CutCell Meshing FLUENT users no longer need to purchase the legacy Academic
GAMBIT/TGrid product to access TGrid functionality.
New at 13.0
TGrid Access Modes
Academic ANSYS Meshing users have the following

options to access TGrid / CutCell:
Within ANSYS Meshing, selecting the CutCell method will by default run TGrid in batch mode. A user may also elect to run TGrid as a stand alone application TGrid runs outside of the Workbench project. Note that due to a QA defect academic users do not have the option to
launch TGrid interactively when the CutCell method is selected from within the ANSYS Meshing Application.
New at 13.0
ANSYS ED 10.0 Retirement
ANSYS ED 10.0 has been retired at release 13.0
Product was primarily used as a marketing tool. Very low quantities deployed in 2009 & 2010. Legacy 10.0 Workbench GUI likely doing more harm than good! Use largely replaced by Academic Teaching with license borrow. Remove ANSYS ED website info. as part of the 13.0 content update. Can address any multi-year agreements that are underway with
remaining CD kits in stock.
We plan to introduce a replacement student product at

release 14.0 called ANSYS Academic Student
Sales via website using self serve license key tool.
New at 13.0
13.0 Academic Product Features Table
http://www.ansys.com/academic/academic-product-features-popup.htm
10
12.1 ANSYS Academic Products
What was new at Release 12.1!
11 11
New 12.1 Academic Products

New Products:
ANSYS Academic Research Mechanical Counterpart to the CFD Research variant. ANSYS Academic Research Electronics Thermal (available 12.1) Bundle of ICEPAK, ICECHIP & ICEBOARD capability. ANSYS Academic Research POLYFLOW Bundle of POLYFLOW capability.
Product Enhancements:
ANSYS Academic Associate HPC Added support for ICEPAK & POLYFLOW HPC. ANSYS Academic Research HPC Added support for ICEPAK & POLYFLOW HPC.
New at 12.1
12
Commercial add-ons for Academic Products.
Academic customers can now purchase the following

commercial add-on products for use with ANSYS Academic products:
Provides flexibility for those that need more than the bundled capability No academic discount on these add-on products! Note that the following do not function with Academic
products:
Geometry Interface for CATIA V4 CADNEXUS/CAPRI CAE Gateway for CATIA V5 ANSYS Interface for Teamcenter Engineering ANSYS SpaceClaim Direct Modeler ANSYS Composite PrepPost (ACP) ANSYS FLUENT V2F (see V2F slide for details)
New at 12.1
They are standard commercial products.
Vista TF CFX-RIF
13
Academic Research Mechanical
ANSYS Academic Research Mechanical (1, 5, & 25 task) New product at release License provides access to:

ANSYS Mechanical, AUTODYN (including explicit STR) DesignModeler, DesignXplorer ANSYS Meshing Application EKM Desktop, ANSYS ICEM CFD MCAD connections (aa_mcad) Includes 4 built-in HPC tasks
HPC capability can be extended with ANSYS Academic Research HPC. Competitive with ABAQUS Research. Supersedes emulator promo (in Europe)! New at
12.1
14
Academic Electronics Thermal
ANSYS Academic Research Electronics Thermal New ANSYS Academic product variant for R 12.1 Available at Research level only 1, 5 & 25 task licenses License provides access to: New at

ANSYS Icepak DesignModeler EKM Desktop ANSYS CFD-Post MCAD connections (aa_mcad) Includes 4 built-in HPC tasks
12.1
HPC capability can be extended with ANSYS Academic Research HPC. Competitive with Mentor Graphics FloTHERM Supersedes legacy Icepak (Fluent LM), Icechip & Iceboard.
15
Research POLYFLOW Description
ANSYS Academic Research POLYFLOW (1, 5 & 25 Task) New ANSYS Academic product variant for R 12.1 Available at Research level only Will bundle into Academic CFD at R13.0. License provides access to: New at

POLYFLOW (full capability solver) POLYDATA DesignModeler, DesignXplorer ANSYS Meshing Application EKM Desktop ANSYS CFD-Post MCAD connections (aa_mcad) Includes 4 built-in HPC tasks
12.1
HPC capability can be extended with ANSYS Academic Research HPC. Supersedes legacy POLYFLOW Research / Teaching
(Fluent LM).
16
ACADEMIC CFD & FLUENT Integration
17 17
Academic Products that contain FLUENT & CFX

Product/Family ACADEMIC ASSOCIATE
ANSYS Academic Associate ANSYS Academic Associate CFD ANSYS Academic Associate HPC
Task variants available 1,5 1,5 1
ACADEMIC RESEARCH
ANSYS Academic Research ANSYS Academic Research CFD ANSYS Academic Research HPC
1,5,25 1,5,25 1
ACADEMIC TEACHING
ANSYS Academic Teaching Advanced ANSYS Academic Teaching Introductory ANSYS Academic Teaching CFD
5,25,50 5,25,50 5,25,50
18
Academic Toolbox Products & CFD

Academic products that can be used with ANSYS Academic CFD products:
Product/Family ACADEMIC TOOLBOX ANSYS Academic Meshing Tools ANSYS Academic CFD Turbo Tools ANSYS Academic Fuel Cell Tools
Task variants available 1,5,25 1,5,25 1,5,25
19
Academic CFD Integration
CFX OR FLUENT solver functionality for all ANSYS Academic products that contain the CFX solver. A single task user may not run both solvers simultaneously. Example: ANSYS Academic Teaching CFD (25 task), allows each of the following: 25 users simultaneous access to CFX or, 25 users simultaneous access to FLUENT or, 10 CFX users plus 15 FLUENT users or Any combination of FLUENT or CFX solvers can be used up to a maximum of 25 simultaneous tasks. Academic Teaching CFD numerical problem size limits: FLUENT 512K cell limit CFX 512K node limit. FLUENT parallel capability included with Academic Research HPC & Academic Associate HPC Academic non commercial use screen logo enabled for FLUENT.
20
Academic CFD Integration - FLUENT
FLUENT capability includes advanced physics modules: FLUENT NOx FLUENT Fiber Module FLUENT MHD Module FLUENT Population Balance Module Additional charge add-on modules: ANSYS Academic Fuel Cell Tools Commercial FLUENT V2F module Commercial Immersed Boundary Module TGRID & GAMBIT are not included Replaced by DesignModeler, ANSYS Meshing Application & ICEM meshing technology. New bundle Academic GAMBIT/TGRID available on legacy Fluent Academic price list. FLUENT parallel capability included with Academic Research HPC Academic Associate HPC Academic non commercial use screen logo enabled for FLUENT.
21
Academic CFD Integration - CFX
CFX Capability includes CFX Full Capability Solver: Multiple Frames of Reference Multi-Phase Flows Reacting and Combusting Species Advanced Turbulence Models CFX Radiation Models Additional charge add-on modules: ANSYS Academic Turbo Tools Modules not available for use with Academic CFD: CFX-RIF VISTA-TF CFX parallel capability included with Academic Research HPC Academic Associate HPC Academic non commercial use screen logo enabled for CFX
22
Academic CFD Integration FLUENT Pre & Post Processing

The following applies to ANSYS Academic products that contain FLUENT at release 12.1:
Using FLUENT 12.1 within the Workbench environment: DesignModeler & ANSYS Meshing are used for preprocessing. FLUENT is an integrated pre-solve-post application. There arent separate applications for Pre or Post, like CFX has. FLUENT users can read in the mesh; set-up their BCs, physical
models, solver settings, etc.; iterate; and post-process all without leaving the single FLUENT application. You can choose to use FLUENTs integrated post-processing or postprocess with ANSYS CFD-Post.
Using FLUENT 12.1 in stand-alone mode (outside of WB): If a user has licensed Academic GAMBIT/TGrid they can use it for preprocessing. FLUENTs integrated post-processing can be used as can ANSYS
CFD-Post.
23
Academic CFD Turbo Tools
ANSYS Academic CFD Turbo Tools: Can bolt on to any academic product that contains CFX CFD capability. Contains ANSYS BladeModeler & ANSYS TurboGrid
of blade geometry.
ANSYS BladeModeler: Specialized, easy-to-use tool for the rapid 3-D design of rotating machinery components. I ANSYS TurboGrid: Mesh creation tool tailored specifically to the needs
Separate due to US export restrictions we may bundle into all CFD
capable bundles at a later date when export ECCN levels have been clarified.
24
FLUENT Academic Legacy Products
25 25
Comparison of Legacy FLUENT & ANSYS Academic CFD

CFD Related Bundled Feature
GAMBIT TGrid Integrated FLUENT Pre, Post, Solve ANSYS CFD-Post FLUENT 6.3 Solver
FLUENT 13.0 Solver
Legacy FLUENT Academic FLUENT License Daemon
FLUENT 6.3 Media FLUENT 13.0 Media
13.0 ANSYS Academic
NOx Fiber Module (CFM) , Population Balance Module MHD Module SST turbulence model (supersedes the need for V2F) DesignModeler & DesignXplorer ANSYS Meshing Application ANSYS Extended Meshing (includingTGrid & ICEM CFD) ANSYS CFX 12.0 (Full Capability Solver) Built in 4 HPC tasks Add on HPC tasks for Research Serial tasks can be used as parallel Numerical limit of 512K node/cells & License Borrow for Teaching level
26
Compatibility with legacy FLUENT 6.3
Solved FLUENT 6.3 databases can be imported by FLUENT 13.0 & post processed using the bundled CFD-Post. Cases set-up in FLUENT 6.X, but not yet solved, can be imported into FLUENT 12.1 FLUENT 6.3 UDFs: Usually when moving to a newer FLUENT version, UDFs need to be recompiled. Sometimes calls in the solver have changed, and the user needs to modify the UDF accordingly before recompiling. This is not a difficult process.
27
Importing legacy GAMBIT geometry
GAMBIT & TGrid are replaced by the following ANSYS Workbench applications present in ANSYS Academic Products: ANSYS DesignModeler for Geometry ANSYS Meshing for mesh/grid generation For users needing continued access to GAMBIT & TGrid we have an
academic promotion that provides an annual lease of Academic GAMBIT/TGrid at a discounted price. See migration section. GAMBIT models can be exported as Parasolid, STEP, or IGES. Any of these formats can be imported into DesignModeler.
28
Importing legacy GAMBIT mesh data
Neither ANSYS Meshing, nor ICEM CFD can read a GAMBIT database model (*.dbs). An existing mesh (*.msh) file can be imported directly into FLUENT 12.0/12.1/13.0. ANSYS Meshing can read meshes & cases saved by GAMBIT, TGrid, and FLUENT 6.X. ANSYS Meshing can read *.msh through the use of FEModeler Read the *.msh file into FEModeler, skin it and take the mesh and geometry skin to ANSYS Meshing. ANSYS ICEM CFD can also read *.msh files.
29
Licensing
30 30
License Feature Names
Eliminated QA defect appended feature names (from 11.0 SP1 etc). Much cleaner license features per product!
Product/Family ACADEMIC ASSOCIATE ANSYS Academic Associate ANSYS Academic Associate CFD ANSYS Academic Associate HPC ACADEMIC RESEARCH ANSYS Academic Research ANSYS Academic Research Mechanical ANSYS Academic Research CFD ANSYS Academic Research AUTODYN ANSYS Academic Research Electronics Thermal ANSYS Academic Research Offshore/Marine ANSYS Academic Research HPC ANSYS Academic Research LS-DYNA ANSYS Academic Research LS-DYNA HPC ACADEMIC TEACHING ANSYS Academic Teaching Advanced ANSYS Academic Teaching Introductory ANSYS Academic Teaching Mechanical ANSYS Academic Teaching CFD ACADEMIC STUDENT ANSYS ED ACADEMIC TOOLBOX ANSYS Academic Meshing Tools ANSYS Academic CFD Turbo Tools ANSYS Academic Fuel Cell Tools
License Features aa_a, aa_mcad aa_a_cfd, aa_mcad aa_a_hpc aa_r , aa_mcad aa_r_m, aa_mcad aa_r_cfd, aa_mcad aa_r_ad, aa_mcad aa_r_et, aa_mcad aa_r_om, aa_r_aql, aa_mcad aa_r_hpc aa_r_dy, aa_mcad aa_dy_p aa_t_a, aa_mcad, aa_ds aa_t_i, aa_mcad, aa_ds aa_t_m, aa_mcad, aa_ds aa_t_cfd, aa_mcad No licensing aa_mesh, aa_mcad aa_turbo aa_fcell
31
License Feature Names Detail 1
Example Product: ANSYS Academic Teaching Advanced License Features: aa_t_a, aa_mcad, aa_ds
Bundle of Geometry interfaces
Academic DesignSpace
aa = ANSYS Academic a = Associate r = Research t= Teaching dy = LS-DYNA Parallel
a = Advanced i = Introductory m= Mechanical cfd = CFD (Fluid Dynamics) hpc = HPC (Parallel) ad = AUTODYN et = Electronics Thermal om = Offshore Marine aql = AQWA Line dy= LS-DYNA p = LS-DYNA Parallel
32
License Feature Names Detail 2
Example Product: ANSYS Academic Teaching Advanced License Features:

aa_t_a, aa_mcad, aa_ds
Academic DesignSpace Bundle of Geometry interfaces.
The aa_* feature contains the majority of licensed features discussed on the features table. Things like DesignModeler, DesignXplorer, Dynamics, Multiphysics, CFX, FLUENT, ICEM CFD are all embedded in this single feature.
33
Licensing Troubleshooting
If you are experiencing a licensing issue heres your checklist: Make sure that you have installed the release 13.0 academic product & are not trying to use your new license file with an older installation! Do not try & work out what product or features you should have by looking at the license file.
Identify what product you have by reviewing your License Form. If in doubt contact your site coordinator or ANSYS sales contact.
Once the 13.0 academic product has been identified, then use the academic product features table on the academic public website to check what features should be available.
34
Compatibility of 13.0 Licenses
Because there have been no changes to the Academic License keys

since Release 12.0:
Release 13.0, 12.1 & 12.0 academic license keys do not function with
11.0 product installations.
R13.0 & R12.1 license keys function with R12.1 & R 12.0 product installations. R12.0 & R12.1 license keys do function with R13.0 & R12.1 product installations. Valid only if the product license existed at that release of course!
Release 11.0 license keys do function with 12.0, 12.1 & 13.0
installations.
Because the appended features needed for 11.0 are absent. Some 11.0 products may function, but no guarantee.
Allows mid-term TECS/Lease customers to upgrade. The 11.0 licenses contain more increments in the file that are not used/required. Exception would be the obsolete 11.0 product licenses. The 11.0 Academic HPC toolbox licenses are supported at 12.0 & 12.1
35
13.0 License Preferences Dialog

Need new screen shot of preferences dialog coming soonI promise!
Shared versus separate licenses setting
36
12.1 License Preferences Dialog
Radio buttons to select commercial or academic Shared versus separate licenses setting
37
License Preferences Shared License Mode
Applications running within the Workbench GUI are separate windows (since 12.0), rather than tabs within a parent window. When a user moves between different application windows,
only one application window will remain active at a time. This is referred to as the shared license mode. Most academic customers will use this mode.
only mode.
Inactive application windows enter a pause state, essentially a view
An optional license mode allows multiple application windows

to remain active, but each active application will check out a separate academic product task. The license mode is selected via the licensing preferences dialogue box.
38
Shared License Mode - General

access, regardless of the academic product capability being used. A single task user must move sequentially from pre, solver & post processing & may not interact with pre or post whilst a solver is running.
The shared license mode ensures uniform Pre/Solve/Post
39
Other Academic Product Capabilities
40 40
Academic AUTODYN
Academic Research AUTODYN (1, 5 & 25 task) Provides lower Research price point for legacy AUTODYN users. Additionally, AUTODYN is included with all academic products that contain Mechanical or Multiphysics capability. Provides really full portfolio solutions Provides wide range of price points with access AUTODYN! Simplifies portfolio. Explicit STR (AUTODYN Lagrange) capability Capability within Workbench Mechanical PrepPost (Simulation) Available to all Academic products that include AUTODYN! Note at R12.0 we retired: Academic Associate AUTODYN Academic Teaching AUTODYN

Existing customers migrate to full Academic Associate or commercial product. Relatively small install base affected. Replaced by Academic Teaching Advanced, Introductory & Mechanical Node limits follows structural physics limits (256K & 32K nodes/elements)
41
Academic Offshore/Marine
ANSYS Academic Research Offshore/Marine Research level only. 1 & 5 task variants. An ASAS & AQWA bundle containing: All AQWA SUITE & ASAS OFFSHORE modules, except Concrete & Panel. Excel & MathCAD modules: ASAS-AXL, ASAS-AMC, AQWA-AQL ANSYS PrepPost (/PREP7) DesignModeler (For use with AQWA SUITE) MCAD connections (For use with AQWA SUITE) Note that FEMGV is not part of this offshore bundle.
Instead ANSYS PrepPost & DesignModeler are the preferred pre & post processing solutions.
42
Academic HPC: Built-in

Uniform HPC across all ANSYS, Inc. physics. 4 HPC (Parallel) task are now built-in: All base academic products with solvers that support parallel processing Teaching, Research & Associate Not a separate license feature/increment built into the aa_* license feature CFX, FLUENT, ICEPAK, POLYFLOW, Mechanical & AUTODYN solvers. The built-in 4 HPC will allow: 1 x dual core SMP or 2 x dual core SMP or 1 x quad core SMP 2 - 4 single core SMP (old school!) DANSYS for 2 - 4 processors The HPC capability is allocated & restricted to each licensed task. Example: For a 25 task license of Academic Research, each user/task can access 4 HPC tasks, with a maximum of 4 HPC tasks applied per solution. The 100 HPC tasks present in this example cannot be simultaneously applied to one analysis solution. LS-DYNA: No built-in HPC
43
Academic HPC: Add-on - Part 1
Associate & Research customers can add-on more HPC: Associate & Research HPC tasks are physics neutral &
support the following solvers:
ANSYS Academic Associate HPC ANSYS Academic Research HPC Mechanical CFX FLUENT AUTODYN ICEPAK POLYFLOW
One task of Academic Research HPC extends the base HPC ability of any one physics. LS-DYNA HPC is not included & is a separate product.
shared (SMP) & distributed (DMP) LS-DYNA parallel.
44
Note that ANSYS Academic Research LS-DYNA HPC enabled both

Academic HPC: Add-on Part 2
Tiered pricing (per task) to provide volume discount: ANSYS Academic Associate HPC replaces: ANSYS Academic Research HPC replaces:
11.0 ANSYS Academic Mechanical HPC 11.0 ANSYS Academic CFD HPC 11.0 ANSYS Academic AUTODYN HPC
ANSYS Academic Research HPC (per processor, up to 128) ANSYS Academic Research HPC (per processor, greater than 128) Commercial HPC used with Associate level products at 11.0.
45
Variational Technology (VT)
VT for Solvers:
products.
Frequency Sweep VT & VT Accelerator Built-in to the base Academic Teaching, Research & Associate
46
Academic Electronics Thermal
ANSYS Academic Research Electronics Thermal will: Import MCAD geometry via DesignModeler. Will be able to use CFD-Post for post-processing Not use DesignXplorer, FEModeler or any Workbench meshing. Icegrb & Iceopt add-on modules: Are not part of the academic bundle due to 3rd party royalty concerns. No Academic integration or pricing defined. Commercial Icegrb & Iceopt may be purchased & used with Academic Research Electronics Thermal. Icepro Is not part of the academic bundle due to 3rd party royalty concerns. No Academic integration or pricing defined. Doesnt use ANSYS license manager, unsure if it functions with academic! Icepro defeaturing will be integrated into DM at v13.0, beta defeaturing
capabilities are available at 12.1.
47
Academic MCAD
The following MCAD Geometry Interfaces are bundled: Geometry Interface for Parasolid Geometry Interface for SAT Geometry Interface for Solidworks Geometry Interface for CATIA V5 Geometry Interface for SolidEdge Geometry Interface for One Space Designer Geometry Interface for Inventor/MDT Geometry Interface for NX Geometry Interface for Pro/ENGINEER Direct CAD Interface for SDRC I-DEAS (ICEM only) The Following are NOT included: CATIA V4 CADNEXUS/Capri Gateway for CATIA V5. Academic customers may purchase & add-on these commercial MCAD
geometry interfaces.
48
Academic Meshing Methods

The majority of ANSYS Academic Products contain: The ANSYS Meshing Application (ANSYS Workbench) ANSYS ICEM CFD ANSYS Mechanical APDL meshing All common ANSYS ICEM CFD meshing methods are included Tetra (Delaunay, Advancing Front and Patch Independent Octree) Prism, Hexa Shell Meshing (Quad and Tri, Patch based and Patch independent) Hexdominant Cartesian (Body fitted and Staircase) TGrid-Delaunay, TGrid-AFT (Advancing Front) Multizone Blocking Excluded ANSYS ICEM CFD meshing methods & products are: AutoHexa, BF-CART, and CART3D Hexa CAA V5 based (For Catia V5) Mesh Export Clarification: Export to ANSYS , Inc. solvers is enabled for all academic products that contain ANSYS ICEM CFD functionality. Export to 3rd party solvers only available for ANSYS Academic Meshing Tools.
49
Academic Meshing - Parallel
Shared Memory Parallel Meshing is included all ANSYS Academic products that contain ICEM CFD meshing. The following ICEM CFD meshing methods support Shared Memory Parallel (SMP): Refinement of Octree Tetra Advancing front Tetra Note that fitting to geometry, flood fill and other parts of the process are handled on a single CPU (not SMP). Scalability Octree tetra: ~ 1.7 speed up for 4 cores. Advancing front Tetra: better than Octree, (data TBD). This is less than our solver HPC scalability, we plan to
enhance this in future releases.
50
Fluid Structural Interaction

The MFX solver allows a two way Fluid Structural Interaction analysis to be performed between the ANSYS Mechanical (or Multiphysics) & the CFX solvers. The following academic products will provide access to the MFX solver: Note that a single task license will allow both the CFX & Structural solver to run simultaneously for an MFX solution.
Product/Family ACADEMIC ASSOCIATE ANSYS Academic Associate ANSYS Academic Associate CFD ANSYS Academic Associate HPC1 ACADEMIC RESEARCH ANSYS Academic Research ANSYS Academic Research Mechanical ANSYS Academic Research CFD ANSYS Academic Research AUTODYN ANSYS Academic Research Electronics Thermal ANSYS Academic Research Offshore/Marine ANSYS Academic Research POLYFLOW ANSYS Academic Research HPC1 ANSYS Academic Research LS-DYNA ANSYS Academic Research LS-DYNA HPC ACADEMIC TEACHING ANSYS Academic Teaching Advanced ANSYS Academic Teaching Introductory ANSYS Academic Teaching Mechanical ANSYS Academic Teaching CFD ACADEMIC STUDENT ANSYS ED
MFX available?
YES NO YES
YES NO NO NO NO NO NO YES NO NO YES YES NO NO NO

51
Features not available in Academic
Export to SAMCEF, ABAQUS and NASTRAN solver
capability from within Workbench Mechanical is not available with any ANSYS Academic Product license.
52
EKM Desktop
EKM Desktop is included with all of the ANSYS Academic

Products that contain Workbench.
53
Platform/OS Support
Academic products are supported on the same platforms as commercial products Within Workbench: See http://www.ansys.com/hardwaresupport Outside of Workbench: Many of our applications bundled into the Academic
products function outside of the Workbench environment & are supported on a wider range of platforms & operating systems, detailed here: http://www.ansys.com/hardwaresupport Windows 7 support: Yes! Available for release 12.1.
54
Academic Strategy & Policies.

A refresher course!
55 55
Core Academic Product Levels
Increased scope regarding legal terms of use Decreasing Price Increasing capability
Teaching
Research
Associate
Academic Toolbox (Add-on Products)
56
Academic Terms of Use

For all Academic products the work must be non-proprietary. User(s) must be affiliated with an academic entity.
Academic Teaching:
May only be used for student instruction, student projects, and

student demonstrations.
Academic Research:
May only be used for degree and/or non-degree related research,

student instruction, student projects, and student demonstrations
Academic Associate:
May only be used for industry related research, degree and/or nondegree related research, student instruction, student projects, and student demonstrations.
See Academic License Form Section 5 & here:

http://www.ansys.com/academic/academic-terms-of-use-popup.htm .
57
Commercial Entity Use of Academic Products?

Generally, academic licenses can be sold to commercial entities under the following conditions:
The commercial entity is sponsoring a Masters or PhD candidate or Diploma, and the academic student being sponsored is the person using the software. Academic Teaching licenses used within a major accounts training facility. In all cases all work performed with the academic license must be nonproprietary in nature.
Our academic products may not be used for:
Benchmarking. Commercial validation projects Commercial/industrial research. Consulting performed by academic students/faculty/staff. Student interns working at the commercial entity.
58
Academic Terms Subsets

Commercial Academic within
Associate Research
Teaching
Reduced pricing & more restrictive terms of use as you move towards the center.
59
ANSYS Academic Product Families

ACADEMIC PRODUCTS
ANSYS Academic
Legacy
Ansoft Academic
Fluent Academic
Mixed Structural, Thermal, Electromagnetic & Fluid dynamics technology Considerable Bundling
HF/RF, SI & EM technology Considerable bundling
Some bundling. Available to existing Fluent Academic customers only.
Our Strategic Direction

60
License Borrow
Available for Academic Teaching products only. Allows one or more tasks from a multiple task license to be borrowed. n-1 tasks may be borrowed from an n task license Maximum borrow duration is 1 week. Early borrow return is enabled. MCAD connections will have the borrow capability. The unlimited DesignSpace capability does NOT have the borrow capability. Borrow is turned OFF by default. It is turned on by request, is free & requires an End User certification form
& additional language on the license form.
61
50 mile LAN Radius

Academic LAN Radius is 50 miles. License borrow LAN Radius
LAN VPN user Designated license server

62
END!
My contact information: Phone: (USA) 503 708 4988. paul.lethbridge@ansys.com
63 63

ANSYS Academic R13.0

Uploaded by

Copyright:

Available Formats

ANSYS Academic R13.0

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

ANSYS Academic R13.0

Uploaded by

Copyright:

Available Formats

ANSYS Academic Products R13.

0 New Features / Update

11/15/2010 Paul Lethbridge

ANSYS, Inc. Proprietary

13.0 ANSYS Academic Portfolio

Task variants available 1,5 1,5 1 1,5,25 1,5,25 1,5,25 1,5,25

1,5 1,5,25 1 25 1 5,25,50 5,25,50 5,25,50 5,25,50 1 1,5,25 1,5,25 1,5,25

ANSYS Academic Fuel Cell Tools

ANSYS, Inc. Proprietary

Whats New @ 13.0 for Academic Products

New Mechanical elements:

GPU enabled for academic products that contain

FLUID220, FLUID221,SURF159, REINF263 HSFLD241, HSFLD242, SOLID278, SOLID279

ANSYS, Inc. Proprietary

Commercial Changes with No impact on Academic bundles!

ANSYS, Inc. Proprietary

Commercial changes that impact academic bundles!

Mechanical APDL Launcher: In order to simplify &

ANSYS, Inc. Proprietary

Whats New @ 13.0 for Academic Products

Radio button to select commercial or academic

2010 ANSYS, Inc. All rights reserved.

ANSYS, Inc. Proprietary

Extended Meshing & TGrid

ANSYS Extended Meshing:

ANSYS, Inc. Proprietary

TGrid Access Modes

Academic ANSYS Meshing users have the following

ANSYS, Inc. Proprietary

ANSYS ED 10.0 Retirement

ANSYS ED 10.0 has been retired at release 13.0

We plan to introduce a replacement student product at

Sales via website using self serve license key tool.

ANSYS, Inc. Proprietary

13.0 Academic Product Features Table

2010 ANSYS, Inc. All rights reserved.

ANSYS, Inc. Proprietary

12.1 ANSYS Academic Products

What was new at Release 12.1!

2010 ANSYS, Inc. All rights reserved.

ANSYS, Inc. Proprietary

New 12.1 Academic Products

Commercial add-ons for Academic Products.

Academic customers can now purchase the following

They are standard commercial products.

2010 ANSYS, Inc. All rights reserved.

ANSYS, Inc. Proprietary

Academic Research Mechanical

ANSYS, Inc. Proprietary

Academic Electronics Thermal

ANSYS, Inc. Proprietary

Research POLYFLOW Description

ANSYS, Inc. Proprietary

13.0 ANSYS Academic Products

ACADEMIC CFD & FLUENT Integration

2010 ANSYS, Inc. All rights reserved.

ANSYS, Inc. Proprietary

Academic Products that contain FLUENT & CFX

Task variants available 1,5 1,5 1

5,25,50 5,25,50 5,25,50