Qip Brochure PHD - 2012 PDF

QIP
QUALITY IMPROVEMENT PROGRAMME
Advance Admission to Ph.D. Programmes

for the academic year 2013-2014 (Final Admission: 2014-2015)
(for teachers of AICTE approved Degree level Engineering Institutions, National Institutes of Technology and National Institutes of Technical Teachers Training and Research)
INFORMATION BROCHURE
Sponsored by
All India Council for Technical Education

(A Statutory Body of Government of India)
Admission coordinated by
Principal Coordinator QIP Centre for Continuing Education Indian Institute of Science Bangalore 560 012
DATES TO REMEMBER
Access to on line submission of applications Closing of on line applications access Last date for receipt of duly forwarded application along with enclosures
28th Sept 2012
31st Oct 2012
09th Nov 2012
Both online and hardcopy of the applications are required for processing, single version of the application will not be considered.
Dear Prospective QIP Scholar

Your interest in the Quality Improvement Programme (QIP)' sponsored by AICTE is appreciated. As you may be aware, the main objective of the programme is to upgrade the expertise and capabilities of the faculty members of AICTE approved degree-level engineering institutions, National Institutes of Technology (NITs) and National Institutes of Technical Teachers Training and Research (NITTTRs) of the country. The programme launched by the Government of India in the year 1970, is now being implemented and monitored by the National QIP Coordination Committee, funded through AICTE. There are three main activities under QIP scheme for the faculty of degree-level engineering institutions: Providing opportunities to teachers of the degree-level engineering institutions to improve their qualifications by offering admissions to Master and PhD degree programmes. Organizing Short Term Courses at the QIP Centres for updating / upgrading the knowledge of faculty members. Curriculum Development Cell activities which help to improve the class room teaching and learning.
Eight major QIP centres at IITs and IISc undertake the various activities listed above. Admission to Master and PhD programmes are also offered in selected areas in additional institutions recognized as minor QIP centres. A large number of teachers from engineering institutions from all over the country have pursued Master and PhD degree programmes under this scheme. These are aimed at improving the standard and quality of technical education through improvement of the qualifications of the faculty members of various engineering institutions. A Curriculum Development Cell has been set up at major QIP Centres for improving the effectiveness of technical education in the country. Its activities include curriculum development and revision or preparation of monographs, textbooks, teachers manuals, teaching aids and other resource materials, examination reforms, organizing interinstitutional programs, seminars, workshops and panel discussions, development of educational technology, creation of methodologies for formal and informal trainings, technical education of the handicaps, etc. A number of short term courses have also been organized by major QIP Centers for the benefit of the faculty members of Engineering Institutions across the country. The QIP web sites (http://www.qip.cce.iisc.ernet.in, www.iitb.ac.in, www.iitd.ac.in, www.iitg.ernet.in www.iitk.ac.in, www.iitkgp.ernet.in, www.qip.iitm.ac.in, www.iitr.ernet.in, www.aicte.ernet.in) will give you necessary information about the programme as well as about the requirements and the procedure to apply for admission in Master / Ph.D. degree programmes. The details of the disciplines and specializations available at various centres are listed in the website and also available in the admission brochure to enable you to make appropriate choices. You can navigate through the links on the left hand side of the main web page for admission and can download the admission brochure. Access to the on-line submission of application opens on September 28, 2012 (Friday). The last date for the on-line submission of the application is October 31, 2012 (Wednesday). Please note that the last date for the receipt of the hard copy of application at the office of the Principal Coordinator QIP ,IISc Bangalore is November 09, 2012 (Friday). The procedure of admission under QIP involves the following steps: Scrutiny of all applications in the office of the Principal Coordinator QIP. Short-listing by the QIP centres for interviews and dispatch of call letters to those selected for interviews. Recommendations by the QIP centres to NQCC. Final selection by the National QIP Coordination Committee (NQCC) and Offer of Admission by the Institution where the final selection has been recommended by NQCC.
The schedule of interviews at various QIP Centres is given in the above websites as well as in the brochure, so that you can plan your travel for attending the interviews at places of your choice. For further information about the QIP, the application form or any associated item, you may contact to the Principal coordinator QIP or any of the Coordinators of the QIP Centres listed in the website or brochure. For further information about a particular institution or a particular department therein, you may directly write to the Head of concerned department or the QIP Coordinator of the institution. Keep in touch with our website. Wishing you all the best,
Principal Coordinator QIP, Centre for Continuing Education, IISc Bangalore.
TABLE OF CONTENTS Sl. No. No. I. II. III. IV. V. VI. VII. VIII. IX. X. XI. XII. XIII. XIV. XV. DETAIL General Information Institutions offering Ph.D. degree programmes and their codes Codes for Departments offering Ph.D. degree programmes at various institutions Eligibility Criteria Advance Admission Scheme Scholarship and Contingency Grant Conditions for Admission Instructions for Completing the on-line Application Application Fee Checklist for each copy of the Application Form Instructions for Dispatching Last Date Procedure for Admissions under QIP Schedule of Interviews for Admission to Ph.D. degree Programmes under QIP Departments and Fields of Specialization at Various Institutions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. Indian Institute of Science, Bangalore Indian Institute of Technology Bombay, Mumbai Indian Institute of Technology Delhi, New Delhi Indian Institute of Technology Guwahati, Guwahati Indian Institute of Technology Kanpur, Kanpur Indian Institute of Technology Kharagpur, Kharagpur Indian Institute of Technology Madras, Chennai Indian Institute of Technology Roorkee, Roorkee Anna University, Chennai Basaveshwar Engineering College, Bagalkot Bengal Engineering & Science University, Shibpur B.M.S. College of Engineering, Bangaluru Coimbatore Institute of Technology, Coimbatore College of Engineering Trivandrum, Thiruvananthapuram College of Engineering, Pune Delhi Technological Uni versity, Delhi Govt. College of Engineering, Aurangabad Govt. Engineering College, Govt. of Kerala, Thrissur Govt. Engineering College, Salem Guru Nanak Dev Engineering College, Ludhiana Indian School of Mines, Dhanbad Institute of Technology, BHU, Varanasi Jadavpur University, Kolkata Madan Mohan Malaviya Engineering college, Gorakhpur Madhav Institute of Technology & Science, Gwalior Manipal Institute of Technology, Manipal Motial Nehru National Institute of Technology, Allahabad National Institute of Technology, Calicut National Institute of Technnology Karnataka, Surathkal National Institute of Technology, Rourkela National Institute of Technology, Tiruchirappalli National Institute of Technology, Warangal PSG College of Technology, Coimbatore Samrat Ashok Technological Institute, Vidisha Shri. G.S. Institute of Technology & Science, Indore Shri. Guru Gobind Singh Institute of Engineering & Technology, Nanded The National Institute of Engineering, Mysore Thiagarajar College of Engineering, Madurai University Visveswaraya College of Engineering, Bangaluru Veer Surendra Sai University of Technology, Burla Page 1 2 6 10 10 10 10 11 11 12 13 13 13 14 15 16 20 29 34 36 40 44 50 56 56 57 57 57 58 58 59 60 60 60 60 60 61 61 62 63 64 64 67 68 70 71 72 72 73 73 74 75 76 76 76
41. 42. 43. 44. 45. 46. 47. 48. 49. 50. 51. 52. 53. 54. 55. 56. 57. 58. 59. 60.
Visvevaraya National Institute of Technology, Nagpur Walchand College of Engineering, Maharashtra S.V. National Institute of Technology Malaviya National Institute of Technology, Jaipur National Institute of Technology, Durgapur National Institute of Technology, Silchar National Institute of Technology, Agartala PDPM Indian Institute of Information Technology Design & Manufacturing, Jabalpur Rajiv Gandhi Institute of Technology, Govt. Engineering College, Kottayam Giani Zail Singh College of Engg. & Tech. Bathinda (Punjab Government College of Engineering, Amravati Netaji Subhas Institute of Technology, New Delhi Kamla Nehru Institute of Technology, Sultanpur Pondicherry Engineering College, Puducherry Sardar Patel College of Engineering, Mumbai Veermata Jijabai Technological Institute (VJTI), Mumbai Sant Longowal Institute of Engg. & Tech. (Deemed University), Punjab Indira Gandhi Institute of Technology, Sarang, Odisha Harcourt Butler Technological Institute, Kanpur TKM College of Engineering, Kollam (Kerala)
77 77 78 79 79 80 80 80 81 81 81 82 82 83 83 83 84 84 84 85
Specimen Application
I. GENERAL INFORMATION
1. The major QIP Centres at IITs and IISc offer admission to Ph.D. degree programmes in several disciplines. In addition, institutions recognised as the minor QIP Centres also offer admission to Ph.D. degree programmes under QIP in some specific departments. 2. Prior to regular admission to the Ph.D. programme at a QIP Centre, a candidate is required to join a pre- Ph.D. contact programme. The duration of the pre-Ph.D. program is 60 days (Advance Admission Scheme) and that of the regular Ph.D. Degree Program is 3 years. 3. Candidate should visit the website http://www.qip.cce.iisc.ernet.in f o r submitting on-line application, updated information related to: receipt of completed application, candidates called for interview, selected list of candidates and all other information pertaining to QIP admission. 4. Candidate should read the brochure thoroughly before i) filling the fields in the on-line application and ii) sending the final print-out of application (duly forwarded by the Head of Institution). 5. Candidates have to first submit their application form on-line through http://www.qip.cce.iisc.ernet.in applications without on-line submission will not be considered. Candidate should make sure that proper Institute / Discipline codes are entered, all relevant details are duly filled in the respective fields. Access to the on-line submission of application opens on September 28, 2012 (Friday). Last date for the on-line submission of application is October 31, 2012 (Wednesday). 6. After filling the application on-line, candidates should send the relevant number of prints of the on-line completed form, duly forwarded by the Principal/Head of the Institution, as instructed along with all enclosures and a DD for Rs.500/- (Rs.250/- for SC/ST/PD) drawn in favour of Registrar IISc, payable at Bangalore, to The Principal Coordinator QIP, Quality Improvement Programme, Centre for Continuing Education, Indian Institute of Science, Bangalore 560 012. 7. The candidate and the Principal/Head of the Institution forwarding the application should ensure that the application is to be send to the Principal Coordinator QIP, IISc Bangalore so as to reach on or before November 09, 2012 (Friday). Applications received after this date will not be considered. On receipt of the application, acknowledgement will be sent by email. 8. Information given by the candidate in all application print-outs should be same. In case of any difference observed in the data relating to experience, marks, designation, addresses, age etc., his/her candidature is liable to be cancelled at any stage even after the selection/ admission.
9. Conditional recommendation by the Principal/Head of the Institution will not be accepted. Applications submitted without signatures of the candidate and the appropriate authorities with seal, and/or without the required enclosures will automatically be rejected. 10. The application number allotted during the on-line registration should be quoted in all correspondences, and such correspondences should be routed through the Principal/Head of the candidates parent institution. The application number may be changed in some unavoidable circumstances and will be intimated through email in such cases. 11. Short-listed candidates will receive Interview Call/Admission letter from the respective QIP Coordinator of the Institute, where they have applied to seek admission. The Principal Coordinator QIP will not send any Call letter to the candidate directly. 12. Interview schedule is final and cannot be altered/ changed under any circumstances. Candidate has to appear for interview at the Institute(s), where he/she would like to seek admission. Candidates may plan their travel accordingly. 13. Concessions, relaxation, and reservations for candidates belonging to SC/ST/OBC/Physically Disabled/Female candidates are as per rules. The reservation rules of GOI will be applied to overall admissions by the NQCC. The selection of a candidate is considered only after the recommendation of the major / minor QIP center. 1
II. INSTITUTIONS OFFERING MASTER DEGREE PROGRAMMES UNDER QIP AND THEIR CODES Sl. No. Name of the Institute/University Code
Institutions having Major QIP Centres: The following institutions having QIP Centres which offer admission to Ph.D degree programmes in several disciplines existing in those institutions: 1 Indian Institute of Science, Bangalore 560 012 . 2 Indian Institute of Technology Bombay, Mumbai 400 076 . 3 Indian Institute of Technology Delhi, New Delhi 110 016 . 4 Indian Institute of Technology Guwahati, Guwahati 781 039 . 5 Indian Institute of Technology Kanpur, Kanpur 208 016 . 6 Indian Institute of Technology Kharagpur, Kharagpur 721 302 . 7 Indian Institute of Technology Madras, Chennai 600 036 . 8 Indian Institute of Technology Roorkee, Roorkee 247 667 . Other Institutions having Minor QIP Centres: The following recognized institutions also offer admission to Ph.D Degree Programmes under QIP in some specific departments as given below: 9 . Anna University, College of Engineering Campus, Chennai 600 025 (i) Civil Engineering, (ii) Electrical Engineering, (iii) Information and Communication Engineering, (iv) Mechanical Engineering Anna University, AC Technology Campus, Chennai 600 025 (i) Chemical Engineering. (ii) Leather Technology Anna University, Madras Institute of Technology, Chennai 600 044 (i) Aerospace Engineering, (ii) Automobile Engineering, (iii)Electronics Engineering, (iv) Instrumentation Engineering (v) Production Technology 10. Basaveshwar Engineering College, (Autonomous), S Nijalingappa, Bagalkot 587 102 (i) Civil Engineering, (ii) Mechanical Engineering, (iii) Electrical Engineering, (iv) Electronics & Communication Engineering (v) Computer Science & Engineering 11. (i) 12. Bengal Engineering and Science University, Shibpur 711 103 (i) Civil Engineering B.M.S. College of Engineering, Bangalore 560 019 (i) Civil Engineering, (ii) Electrical Engineering, (iii)Mechanical Engineering, (iv) Industrial Engineering & Management, (v) Electronics & Communication Engineering. Coimbatore Institute of Technology, Coimbatore 641 014 (i) Civil Engineering, (ii) Mechanical Engineering, (iii) Electrical & Electronics Engineering, (iv) Chemical Engineering. College of Engineering, Pune(Maharashtra) 411 005 BE BB AU BG BM DL GW KN KH MD RR
BS
13.
CC
14.
CP
(i) Civil Engineering, (ii) Mechanical Engineering, (iii) Production Engineering, (iv) Electrical Engineering, (v) Electronics & Telecommunication, (v) Computer Engineering Information Technology (vii) Instrumentation & Control (viii) Metallurgy &Materials Science 15. Instrumentation & Control, (viii) Metallurgy & Materials Science College of Engineering Trivandrum Thiruvananthapuram 695 016
(i) Civil Engineering, (ii) Mechanical Engineering, (iii) Electrical Engineering, (iv) Electronics & Communication Engineering. 16. Delhi Technological University, Delhi (i) Civil Engineering, (ii) Mechanical Engineering, (iii) Electrical Engineering, (iv) Polymer Science & Chemical Technology Govt. College of Engineering, Aurangabad 431 005 (Maharashtra) (i) Civil Engineering, (ii) Electrical Engineering, (iii) Electronics & Communication Engineering. Govt. Engineering College Govt. of Kerala, Thrissur 680 009 (i) Civil Engineering, (ii) Mechanical Engineering, (iii) Electrical Engineering.
2
CT
DD
17. 18.
GA GK
Sl. No. 19.
Name of the Institute/University Govt. Engineering College, Salem 680 009 (TN) (i) Civil Engineering, (ii) Mechanical Engineering, (iii) Electrical Engineering.
Code GC
20.
Guru Nanak Dev Engineering College, Ludhiana 141 006 (Punjab) (i) Civil Engineering, (ii) Mechanical Engineering, (iii) Electrical Engineering.
GN
21.
Indian School of Mines, Dhanbad 826 004 (i) Mining Engineering Institute of Technology, BHU, Varanasi 221 005 (i) Metallurgical Engineering, (ii) Mining Engineering Jadavpur University, Kolkata 700 032 (i) Electrical Engineering, (ii) Electronics & Telecommunication Engineering, (iii) Mechanical Engineering (iv) Production Engineering Madan Mohan Malaviya Engineering College, Gorakhpur (UP) 273 010 (i) Civil Engineering, (ii) E l e c t r i c a l E n g i n e e r i n g , ( i i i ) Electronics & Communication Engg., (iv) Mechanical Engineering
IS VN JU
22. 23.
24.
MM
25.
Madhav Institute of Technology & Science, Gwalior 470 005 (i) Civil Engineering, (ii) E l e c t r i c a l E n g i n e e r i n g , ( i i i ) Computer Science & Engineering, (iv) Mechanical Engineering (v) Architecture Manipal Institute of Technology, Manipal 576 104 (i) Civil Engineering, (ii) Mechanical and Manufacturing Engineering
MG
26.
MI
27.
Motilal Nehru National Institute of Technology, Allahabad211 004 (i) Applied Mechanics (ii) Civil Engineering (iii) Computer Science & Engineering (iv) Electrical Engineering, (v) Electronics & Communication Engineering, (vi) Mechanical Engineering, (vii) Chemistry, (viii) Humanities & Social Science, (ix) Physics, (x) School of Management Studies, (xi) GIS Cell
MN
28.
National Institute of Technology, Calicut - 673 601 (i) Civil Engineering, (ii) Electrical Engineering, (iii) Electronics & Communication Engineering, (iv) Mechanical Engineering
CL
29.
National Institute of Technology Karnataka, Surathkal 575 025 (i) Applied Mechanics & Hydraulics, (ii) Civil Engineering, (iii) Chemical Engineering, (iv) Computer Engineering, (v) Electronics & Communication Engineering, (vi) Electrical & Electronics Engineering, (vii) Humanities (viii) Mechanical Engineering (ix) Mining Engineering, (x) Metallurgical & Materials Engineering
SK
30.
National Institute of Technology, Rourkela 769 008 (i) Ceramic Engineering, (ii) Chemical Engineering, (iii) Electronics & Communication Engineering, (iv) Electrical Engineering, (v) Mechanical Engineering, (vi) Metallurgical & Materials Engineering, (vii) Mining Engineering
RK
31.
National Institute of Technology, Tiruchirappalli 620 025 (i) Electrical & Electronics Engineering, (ii) Metallurgical & Materials Engineering, (ii) Production Engineering, (iv) Chemical Engineering, (v) Civil Engineering, (vi) Computer Science & Engineering, (vii) Instrumentation & Control Engineering (viii) Mechanical Engineering
TR
32.
National Institute of Technology, Warangal 506 004 (i) Chemical Engineering. (ii) Civil Engineering. (iii) Mechanical Engineering, (iv) Mathematics & Humanities
WR
Sl. No. 33.
Name of the Institute/University PSG College of Technology, Coimbatore 641 004 (i) Mechanical Engineering (ii) Production Engineering Samrat Ashok Technological Institute, Vidisha (M.P) (i) Civil Engineering, (ii) Computer Science & Engineering, (iii) Information Technology, (iv) Electrical Engineering, (v) Mechanical Engineering,
Code PS
34.
SV
35.
Shri G. S. Institute of Technology & Science, Indore 452 003 (i) Civil Engineering, (ii) Electrical Engineering, (iii) Electronics & Communication Engineering, (iv)Computer Science & Engineering, (v) Mechanical Engineering, (vi) Industrial & Production Engineering.
GS
36.
Shri Guru Gobind Singh Institute of Engineering & Technology, Nanded 431 606 (i) Electronics & Communication Engineering, (ii) Instrumentation & Control, (iii) Production Engineering, (iv) Civil Engineering, (v) Mechanical Engineering,
SG
37.
The National Institute of Engineering, Mysore 570 008 (i) Civil Engineering, (ii) Electrical Engineering, (iii) Industrial Engineering (iv) Production, (v) Computer Science & Engineering (vi) Information Technology Thiagarajar College of Engineering, Madurai 625 015 (i) Civil Engineering, (ii) Electrical Engineering, (iii) Mechanical Engineering, (iv) Electronics & Communication Engineering., (v) Computer Science & Engineering.
NM
38.
TM
39.
University Visveswaraya College of Engineering, Bangaluru 560 056 (i) Civil Engineering Veer Surendra Sai University of Technology, Burla (Orissa) (ii) Civil Engineering, (ii) Electrical Engineering, (iii) Electronics & Communication Engineering, (iv) Mechanical Engineering. (v) Production Engineering. Visvesvaraya National Institute of Technology, Nagpur 440 011 (i) Electrical Engineering (ii) Metallurgical Engineering
UV
40.
VB
41.
VR
42.
Walchand College of Engineering, Sangli - 416 415 (i) Civil Engineering (ii) Mechanical Engineering (iii) Electrical Engineering (iv) Electronics & Communication Engineering, (v) Computer Science & Engineering
WS
43.
S.V. National Institute of Technology, Surat - 395 007 (i) Civil Engineering (ii) Mechanical Engineering (iii) Electrical Engineering (iv) Electronics & Communication Engineering (v) Computer Engineering (vI) Chemical Engineering
SS
44
Malaviya National Institute of Technology, Jaipur - 302 017 (i) Chemical Engineering (ii) Civil Engineering (iii) Electrical Engineering (iii) (iv)Mechanical Engineering (v) Metallurgical & Materials, (v) Electronics & Communication Engineering, (vii) Computer Engineering National Institute of Technology, Durgapur - 713 209
MJ
45
ND
(i) Biotechnology (ii) Chemical Engineering (iii) Civil Engineering iv) Computer Science & Engineering (v) Electronics & Communication Engineering (vi) Electrical Engineering (vii) Mechanical Engineering (viii) Metallurgical Materials Engineering
46 National Institute of Technology, Silchar - 788010 NS
(i) Civil Engineering, (ii) Mechanical Engineering, (iii) Computer Science & Engineering, (iv) Electrical Engineering, (v) Electronics & Communication Engineering
4
Sl. No. 47
Name of the Institute/University National Institute of Technology, Agartala 799055 (i) Mechanical Engineering (ii) Electronics & Communication Engineering (iii) Electrical Engineering (iv) Production Engineering (v) Civil Engineering
Code NA
48
PDPM Indian Institute of Information Technology Design & Manufacturing, Jabalpur - 482 005 (i) Computer Science & Engineering (ii) Electronics & Communication Engineering (iii) Mechanical Engineering
PD
49
Rajiv Gandhi Institute of Technology, Govt. Engineering College, Kottayam - 686 501
(i) Electrical Engineering (ii) Mechanical Engineering (iii) Civil Engineering
RG
50
Giani Zail Singh College of Engineering. & Technology, Bathinda (Punjab) - 151 001 (i) Computer Science & Engineering (ii) Mechanical Engineering (iii) Electrical Engineering (iv) Civil Engineering & (v) Textile Engineering
GZ
51
Government College of Engineering, Amravati - 444 604 (i) Electrical Engineering (ii) Mechanical Engineering (iii) Civil Engineering
AM
52
Netaji Subhas Institute of Technology, New Delhi - 110 078 (i) Electronics communication Engineering (ii) Computer Engineering (iii) Instrumentation & Control (iv) Manufacturing Process & Automation (v) Biotechnology
NN
53
Kamla Nehru Institute of Technology, Sultanpur - 228 118 (i) Electrical Engineering
KS
54
Pondicherry Engineering College, Puducherry - 605 014 (i) Electronics & Communication Engineering (ii) Computer Science & Engineering (iii) Electrical Engineering (iv) Mechanical Engineering (v) Civil Engineering
PY
55
Sardar Patel College of Engineering, Mumbai - 400 058

(i) Civil Engineering
SM
56
Veermata Jijabai Technological Institute (VJTI), Mumbai - 148 106 (i) Civil Engineering (ii) Electrical Engineering (iii) Mechanical Engineering (iv) Electronics Engineering & (v) Textile Technology
VM
57
Sant Longowal Institute of Engineering & Technology, (Deemed University), Punjab - 148 106 (i) Mechanical Engineering (ii) Food Engineering & Technology (iii) Electronics & Instrumentation Engineering (iv)Chemical Technology
SP
58
Indira Gandhi Institute of Technology, Sarang, Odisha - 759 146 (i) Civil Engineering (ii) Mechanical Engineering (iii) Electrical Engineering
IO
59
Harcourt Butler Technological Institute, Kanpur - 208 002 (i) Civil Engineering (ii) Mechanical Engineering (iii) Electronics & Communication Engineering (iv) Chemical Engineering
HK
60
TKM College of Engineering, Kollam (Kerala) - 691 005 (i) Civil Engineering (ii) Mechanical Engineering
TK
III. CODES FOR DEPARTMENTS OFFERING TO Ph.D. DEGREE PROGRAMMES AT VARIOUS INSTITUTIONS Department/Centre Code Institution(s) Offering Ph.D. Degree Programme
Aerospace Engineering Aeronautical Engineering Agriculture & Food Engineering Alternate Hydro Energy Centre Applied Mechanics Applied Mechanics & Hydraulics Applied Research In Electronics Architecture & Planning Architecture & Regional Planning Atmospheric & Oceanic Sciences Atmospheric Sciences Automobile Engineering Biochemical Engineering & Biotechnology Biomedical Engineering (School of) Biosciences & Bioengineering Biotechnology Ceramic Engineering Centre of Excellence in Disaster Mitigation & Management. Centre of Nanotechnology Centre for Studies in Resources Engineering Centre for Sustainable Technology Chemical Engineering Chemical Engineering Chemical Technology Chemistry
AE AE AG AH AM AM AL AR AP AS AS AU BC BM BS BT CM DM NT SR ST CH CL CT CY
BG, BM, KH, KN, MD AU KH RR DL, MD, MN SK* DL RR, MG KH BG DL AU DL DL BM GW, KH, MD, ND, NN, RR RK RR RR BM BG AU, BG, BM, CC, DL, GW, HK, KH, KN, MD, MJ, ND, RK, RR, SK, SS, WR, TR SP BM, DL, GW, KH, KN, MD, MN, RR AM, AU, BB, BE, BG, BM*, BS, CC, CL, CP, CT, DD, DL*, GA, GC, GK, GN, GS, GW, GZ, HK, IO, KH, KN*, MD*, MG, MI, MJ, MM, MN, NA, ND, NM, NS, PY, RG, RR*, SG, SK*, SM, SS, SV, TK,TM, UV, VB, VM, WR, WS, TR BG BM, BS, CP, DL, GW, GZ, KH, KN, MD, MG, MN, ND, NM, NS, PD, PY, SK, SV, TM, TR, WS CP, NN, SS KH KH GW BM, RR RR
Civil Engineering
CE
Civil Engineering Computer Science & Automation Computer Science & Engineering Computer Engineering & Information Technology Cryogenic Engineering Centre for Educational Technology Design Earth Science Earthquake Engineering
CV CS CS CS CR ET DE ES EQ 6
Department/Centre
Code
Institution(s) Offering Ph.D. Degree Programme
Electrical & Electronics Engineering Educational Technology Electrical Communication Engineering
EE ET EC
GW, TR, CC, GK, SK KH BG AM, AU, BG, BM*, CC, CL, CP, CT, DL, GA, GC, GK, GS, GN, GZ, JU*,IO, KH, KN,KS,MD, MG, MJ, MM, MN,NA, ND, NM, NS, PY, RG, RK, RR, SS, SV, TM, VB, WS, VR, MT BB, BS, CL, CT, DD, GA, GS ,MG, MJ, MM, MN, NA, ND, NM, NN, NS, PD, PY, RK, SG, SK, SS, SV, TK, TM, VB, WS RR KH, SK JU*, CP, JU AU,MN, VM BG SP GW DL BM MD GW BM SP KH KH BM, DL, GW, KH, KN, MD, MN, RR, SK RR DL KN BM BM KH GS, NM BS, NM AU MM, NM, SV
Electrical Engineering
EE
Electrical Engineering Electronics & Communication Engineering Electronics & Computer Engineering Electronics & Electrical Comm. Engineering Electronics & Telecommunication Engineering Electronics Engineering Electronic Design & Technology (centre) Electronics & Instrumentation Engineering Energy (centre) Energy Studies Energy Science & Engineering Engineering Design Environment (centre) Environmental Science & Engineering Food Engineering & Technology Geology and Geophysics G.S. Sanyal School of Telecommunication Humanities & Social Sciences Humanities Hydrology Industrial Tribology, Machine Dynamics & Maintenance Engineering Industrial & Management Engineering Industrial Design Centre Industrial Engineering & Operations Research Industrial Engineering & Management Industrial Engineering & Production Engineering Industrial Engineering Information & Communication Engineering Information Technology
EP EC LC EC EC EC ED EI EN EN EN ER EV EV FE GG GT HS HS HY TR IM ID IO IE IP IE IC IT
7
Department/Centre
Code
Instrumentation & Control Instrument Design & Development Instrumentation Engineering Instrumentation and Applied Physics Leather Technology Management Studies Management Studies Material Research Centre Materials & Metallurgical Engineering Materials Science Mathematics Mathematics & Humanities Mathematics/Statistics Manufacturing Process & Automation Mechanical & Industrial Engineering
IC ID IN IN LT MS MG MR MT MS MA MH MA MP ME
CP, NN, TR DL AU, CP, SG BG AU MD BG, RR, DL BG KN, CP KH, KN BG, BM, DL, GW, KH, MD, RR WR KN NN RR AM, AU, BB, BG, BM, BS, CC, CL, CP, CT, DD, DL, GK, GC, GS, GN, GW, GZ, HK, IO, KH, KN, JU*, MD, MG, MJ, MM, MN, NA, ND,NS,PD, PS, PY, RG, RK*, SG, SK, SP, SS, SV, TK, TM, TR, VB, VM, WR, WS, MI MD, MJ, ND, RK, RR KH, SK ,TR BM, VN,VR BG CP IS, KH, RK, SK ,VN KN MD KH RR BG BG, BM*, DL, GW, KN, MD, MN, RR KH
Mechanical Engineering
ME
Mechanical & Manufacturing Engineering Metallurgical & Materials Engineering Metallurgical & Materials Engineering Metallurgical Engineering & Materials Science Metallurgical Engineering Materials Engineering Metallurgy & Materials Science Mining Engineering Nuclear Engineering and Technology Ocean Engineering Ocean Engineering & Naval Architecture Paper Technology Product Design Physics Physics & Meteorology
MM MM MT MM MT MT MT MI NE OE ON PP PD PH PM 8
Department/Centre
Code
Polymer Science & Engineering Polymer Science & Chemical Technology Production Engineering Production Technology Paper Technology Reliability Engineering Rubber Technology Rural Development Rural Development & Appropriate Tech. School of Information Technology School of Management Super Computer Education & Research Sustainable Technologies (Centre) Systems & Control Engineering Textile Engineering Textile Technology Water Resources Development & Management
PS PS PE PT PP RE RT RD RD IT MG SE ST SC TX TX WR
DL DD CP, JU*, NA, NM, PS, SG,TR, VB AU RR KH KH KH DL KH BM, MN BG BG BM GZ DL, VM RR
*Specialization have to be indicated while opting for the particular department. Codes for the Specializations are
given along with the details corresponding to the particular institution (Depts. & Field of Specialisation)
IV. ELIGIBILITY CRITERIA

1. Only candidates (such as lecturers, readers, asst. professors, associate professors and professors) with a
minimum of three-years teaching experience as full-time regular/permanent teachers of AICTE approved Degree level Engineering Institutions, National Institutes of Technology (NITs) and National Institutes of Technical Teachers Training and Research (NITTTRs) as on September 30, 2012 (Sunday) are eligible to apply. Admissions to Ph.D. degree programme under QIP are open only to candidates with a basic degree in Engineering or Technology or Architecture or such other qualification. 2. The candidate should satisfy the minimum eligibility criteria prescribed by the individual Department (and/or the Institution) to which admission is sought. 3. Computer Programmers, Systems Programmers, Workshop Staffs, Guest Lecturers, Visiting Lecturers, Teaching Assistants, Ad-hoc/Contract or Part-time Teachers, Research Engineers, Scientific Officers, Technical Assistants, and other such categories of staff are not eligible. 4. Teachers of the Major QIP Centres are not eligible. 5. Teachers of the Minor QIP Centres are eligible to apply to Major QIP Centres. 6. Teachers of the minor QIP Centres are permitted to apply for a field of specialization available in another minor QIP centre, which is not available in their parent department on the specific recommendations of the Departments and Institutes Head stating that a faculty in the particular specialization is required for their Institution. Candidates completed M.Tech under QIP programme can not apply before completion of the bond period at their parent Institute.
V. ADVANCE ADMISSION SCHEME
As per the advance admission scheme for Ph.D. degree programme under QIP, a candidate will receive admission during 2013-2014 session to the Pre-Ph.D. programme and on successful completion of this programme, he will be offered admission to the regular Ph.D. programme during 2014-2015. During the one-year period of the Pre-Ph.D. program, the candidate is required to make maximum of four visits to the institution (to which he/she is offered admission) for a total period of sixty days, to decide on the area of research, to identify guide, and to start preliminary work. During this period, the candidate is to be treated as on deputation by the sponsoring institution. TA/DA as per AICTE norms for the visits would be borne by the Institute where the admission is offered, subject to the receipt of the grants from the AICTE. The question of final offer for admission will be considered during MayJuly 2014, based on the performance of the candidate during the period of the advance admission.
VI. SCHOLARSHIP AND CONTINGENCY GRANT
The candidates admitted for the regular Ph.D. degree programme under QIP will receive a sum of Rs. 9,000 per month as Living Expenditure allowance and a contingency grant of Rs.10,000 per annum for three years.
VII. CONDITIONS FOR ADMISSION
1. Admission is possible only to the Institutions and the Departments listed in the Information brochure. 2. The final admission of the candidate will be subject to the clearance and approval by the Admission Wing (Section) of the concerned institution as per its rules and regulations in force at the time of admission. 3. The candidate, if selected, should be relieved from the parent Institution to join the programme in time for the session to which he/she is admitted. 4. The candidate joining the Ph.D. degree programme under QIP on deputation would be entitled to receive his/her salary and allowances, which must be paid by the parent institution sponsoring him/her. 5. Conditional recommendation by the Principal/Head of the Institution will not be accepted. 6. The Principal/Head of the Institution of a candidate who is selected for admission should ensure that the sponsorship certificate is produced by the candidate at the time he/she joins the course.
7. If a QIP scholar discontinues Ph.D programme, the scholar has to refund the scholarship and contingency received to the AICTE through the QIP Centre, and the parent institution may seek refund of the salary and allowances paid to him for the period he/she attended the programme.
10
VIII. INSTRUCTIONS FOR COMPLETING THE ON-LINE PPLICATION General Instructions

1. The candidate should first register by clicking New Registration. An email confirming the registration will be sent by assigning the application number and a password. The application number and the password are required for subsequent operations. Hence the candidate should remember both of them or keep them at a safe place.
2. Candidate can start filling up the on-line application by logging in through View/Edit Application. 3. On-line application can be completed in one or more sessions by revisiting the website using the assigned application number and password. 4. The candidate should enter all required information correctly in all fields of the on-line application. 5. After filling the fields, the candidate can save the information in between by using the SAVE button. The candidate can edit data in any field till the final submission and printout is taken. The last date for the on-line submission of application is October 31, 2012.
Personal Information
6. For the Designation field, the candidate should choose one of the following designation codes from the combo box. For designations not covered, the candidate should specify the exact designation under the other designation field, failing which his / her application cannot be considered.
Designation Assistant Lecturer Associate Lecturer Lecturer
Code 1 2 3
Designation Senior Lecturer Reader Assistant Professor
Code 4 5 6
Designation Associate Professor Professor Other Designation
Code 7 8 9
7. After completing the Name, Designation, Department and Address fields (using the pull-down menu) enter Date of Birth; Gender as Male or Female; the category by General, SC, ST, or OBC; put Yes if you belong to Physically Disabled Category and No if you do not; Married as Yes if you are married and No if you are single.
Educational Qualifications and Academic Data

8. During the process of entering the application details, additional sub-links are provided in appropriate places. For example, while entering the overall performance of the candidate under Educational Qualifications, there will be a link through which the candidate can furnish the semester wise / year wise particulars. 9. For filling Academic data and Additional qualification, if the absolute marks are awarded, then fill, e.g. 650/800 where the total marks obtained is 650 out of total of 800. If the Grade Point Average (GPA) is awarded, fill, e.g. 6.7/10 where 6.7 is GPA obtained on a scale of 10. If the candidate has failed in any subject during any semester examination and cleared that subject in a later semester, the marks obtained in that subject should be added back to the semester in which it was supposed to have been cleared and then the total marks is to be calculated. Candidate should take the marks of all the semesters for calculating the overall percentage or CGPA (irrespective of the methodology adopted by the university/college in awarding final class/division). 10. During the entry of details like detailed semester wise / year wise information, detailed teaching experience etc., the candidate has to enter the details for which documents of proof are to be attached.
Institute and Department Preferences

11. A candidate can apply to a maximum of three institutions and a maximum of two departments in each of the
chosen Institutes (i.e., maximum of total six options only). 12. Select the Institution by using the pull-down-menu as per the order of your preference. Then enter the programme code desired as per preferred choices with valid code. 13. Appropriate list of valid codes can be viewed using links provided. The Programme code contains 6 characters; the first 2 alphabets identify the Institute, the next 2 alphabets identify the department within the Institute and the last 2 digits identify the field of specialization. For example, a code BGEC01 represents a particular field of specialization in the Department of Electrical Communication Engineering, IISc Bangalore.
11
Preview of Application
14. Once the complete details about the candidate are entered and saved, the on-line application can be printed. To preview the completed application, the candidate can print a draft copy of the application. He should check the completeness and correctness of the information; if needed, corrections can also be made before the final submission.
Final Confirmations and Printouts

15. After finalizing the contents of the application, the candidate should invoke the FINAL version of the application. Click here for printing the FINAL version of the application. Once the FINAL version option is chosen, the candidate will not be allowed to modify the contents of the application. The FINAL version should be printed only on A4 sheet with the print orientation as portrait, and margins as 20 mm (left, right, top and bottom). The print report contains multiple copies of the application. The first copy corresponds to the copy for Principal Coordinator QIP, IISc Bangalore and one copy each for the preference code related to the number of institutions and departments, a candidate proposes to apply to. 16. The following Table indicates the number of printouts to be taken and the number of sets of enclosures required as related to the number of institutions and departments a candidate proposes to apply.
Total No. of Departments (Streams or Specializations) Chosen
1 2 2 3 4 3 4 5 6
No. of Institutions Chosen

1 1 2 2 2 3 3 3 3
No. of applications to be printed and No. of sets of enclosures required

2 3 3 4 5 4 5 6 7
17. In each copy, the candidate should affix his/her recent stamp-size photograph in the space provided. 18. The candidate should thoroughly verify the contents of the printed documents and sign at the appropriate places. 19. In the Forwarding Note of the Application Form, the space provided for the Name of the Candidate and Teaching Experience must be duly filled in and signed by the Principal / Head of the Institution along with Office Seal. 20. Applications submitted without signatures of the candidate and the appropriate authorities with seal, and/or without the required enclosures will automatically be deemed invalid.
IX. APPLICATION FEE

A demand draft for Rs 500/-for General/OBC Category and Rs. 250/-for SC/ST/PD candidates, drawn in favour of Registrar IISc payable at Bangalore should be attached with the form marked as, Copy for Principal Coordinator on top of the form. Candidate should write their application number, name, address and courses applied on back side of the DD. Candidate should note that the fee paid other than DD i.e., by IPO, cheques, etc. are not acceptable. Application fees once paid cannot be refunded.
X. CHECKLIST FOR EACH COPY OF THE APPLICATION FORM

In Forwarding Note, the candidate should check his/her Name, years and months of experience, signature, date, and office seal. Photographs: Affix recent stamp size photographs at space provided on all copies of Application Forms including Copy for Principal Coordinator. Signatures of the Applicant: The candidate should sign in all the print-outs at relevant places. Candidate should ensure that all informations are properly filled in and required number of print-outs are taken and all copies are to be send to the Principal Coordinator QIP.
12
Enclosures
1. Application Fee: DD of Rs. 500/- for General/OBC Category and Rs. 250/- for SC/ST/PD candidates should be
enclosed with the copy of the Principal Coordinator QIP form only. 2. Candidates belonging to SC, ST or OBC category, must attach an attested copy of the caste certificate issued by a competent authority as per the Government of India rules. 3. Physically Disabled candidates must attach a copy of the certificate issued by a competent authority as per Government of India rules. 4. Enclose attested copies of all the relevant certificates
Certificates of the Qualifying Examination (Bachelor and Master)and other Degrees Age proofing Certificate Mark Lists of all years/semesters of qualifying examination (mark sheets clearly showing total marks obtained out of maximum marks according to semester or year) Teaching Experience Industrial/Research Experience Certificates. The certificates of Short Term Courses attended. All Research Publications. Any other Academic qualifications/Awards etc.
XI. INSTRUCTIONS FOR DESPATCHING

1.
For the convenience of the candidate, a check list is also printed as the last page. One can use this list and ensure the completeness of application. Once completed, the entire bunch (all copies) is to be dispatch to the Principal Coordinator QIP, IISc Bangalore along with the DD of the relevant amount.
2. Before mailing the completed forms, please ensure that each copy of application form and its enclosures are properly fastened with a tag separately at the left-hand top corner. 3. In case, your applications are submitted by your sponsor, it is your responsibility to ensure that the application is forwarded to the Office of the Principal Coordinator QIP well within time so as to reach on or before November 09, 2012 (Friday). Applications received after this date will not be considered.
4. In case, the candidate has forgotten the password, the candidate should send an email (using the email ID mentioned in the on-line application) to office@cce.iisc.ernet.in furnishing the following details: Application Number, Name of the Candidate, Date of Birth, Address for correspondence, Gender and Category. After verification, the candidate will be informed the password through email only. 5. The requisite number of the print-outs of the application submitted on-line, along with the required number of enclosures, as mentioned, should be sent to The Principal Coordinator QIP, Quality Improvement Programme Centre, IISc Bangalore, Bangalore 560 012, preferably by Speed Post or Courier Service, to reach the Office on or before November 09, 2012 (Friday). Applications received after this date will not be considered: All the completed forms along with enclosures should be sent only to the Principal Coordinator QIP, IISc Bangalore. For any clarification contact: Phone: 080 22932491; Fax: 080 23600911, Email: office@cce.iisc.ernet.in
XII. LAST DATE The last date for on-line submission of application is October 31, 2012 (Wednesday). Print-outs of on-line filledin application, including the Copy for Principal Coordinator, with its enclosures, complete in all respect should reach The Principal Coordinator QIP, Quality Improvement Programme Centre for Continuing Education, Indian Institute of Science, Bangalore 560 012, on or before November 09, 2012 (Friday). Applications received after this date will not be considered. XIII. PROCEDURE FOR ADMISSIONS UNDER QIP
1. Short-listing of the candidates will be done first by the office of the Principal Coordinator, then finally at the
2.
3. 4. 5.
Department/Institute concerned. Interview letters will be sent to the short-listed candidates by the Department/institute concerned. Interviews will be conducted in the Departments at the individual Institutions. Schedule of interviews is provided in the next page. Please note that No TA/DA will be paid to candidates for attending the Interviews Selections will be made by the National QIP Coordination Committee based on the recommendations of various institutions. Final Results will be available at the web site: http://www.qip.cce.iisc.ernet.in Admission letters will be issued to the selected candidates by the respective QIP centres or Academic sections of the institutions offering admission.
13
XIV. SCHEDULE OF INTERVIEWS FOR ADMISSION TO Ph.D. DEGREE PROGRAMMES UNDER QIP
The following dates of interview at various QIP Centres, finalized by National QIP Coordination Committee, are final and cannot be altered under any circumstances. Institute National Institute of Technology, W arangal National Institute of Technology, Calicut IIT Madras Anna University, Chennai College of Engineering Trivandrum, Thiruvananthapuram PSG College of Technology, Coimbatore National Institute of Technology, Tiruchirapalli UVCE, Bangalore IISc Bangalore Manipal Institute of Technology, Manipal National Institute of Technology Karnataka, Surathkal Visvesvaraya National Institute of Technology Nagpur IIT Bombay SGS Institute of Technology & Science, Indore National Institute of Technology, Rourkela Madan Mohan Malaviya Engineering College, Gorakhpur Bengal Engineering and Science University, Shibpur Jadavpur University, Kolkata IIT Guwahati Guru Nanak Dev Engineering College, Punjab Motilal Nehru National Institute of Technology, Allahabad IIT Kharagpur Institute of Technology, BHU, Varanasi Interview Date 16-01-13 18-01-13 21-01-13 22-01-13 23-01-13 24-01-13 25-01-13 28-01-13 29-01-13 30-01-13 31-01-13 01-02-13 04-02-13 05-02-13 06-02-13 07-02-13 08-02-13 11-02-13 12-02-13 13-02-13 14-02-13 15-02-13 18-02-13 19-02-13 20-02-13 21-02-13 22-02-13 25-02-13 26-02-13 27-02-13 28-02-13 01-03-13 04-03-13 05-03-13 06-03-13 07-03-13 14 Day Wednesday Friday Monday Tuesday Wednesday Thursday Friday Monday Tuesday Wednesday Thursday Friday Monday Tuesday Wednesday Thursday Friday Monday Tuesday Wednesday Thursday Friday Monday Tuesday Wednesday Thursday Friday Monday Tuesday Wednesday Thursday Friday Monday Tuesday Wednesday Thursday
Sl .No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
Indian School of Mines, Dhanbad

IIT Kanpur IIT Delhi IIT Roorkee Shri Guru Gobind Singh Institute of Engineering & Technology, Nanded Govt. College of Engineering, Aurangabad Walchand College of Engineering, Sangli Coimbatore Institute of Technology, Coimbatore Basveshwar Engineering College, Bagalkot BMS College of Engineering, Bangalore The National Institute of Engineering, Mysore Madhav Institute of Technology & Science, Gwalior Govt. Engineering College , Kerala
Sl.No. 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
Institute Thiagarajar College of Engineering, Madurai Govt. College of Engineering, Salem College of Engineering, Pune Veer Surendra Sai University of Technology, Burla Delhi Technological University, Delhi Smrat Ashok Technological Institute, Vidisha S.V. National Institute of Technology, Surat Malaviya National Institute of Technology, Jaipur National Institute of Technology, Durgapur National Institute of Technology, Silchar National Institute of Technology, Agartala PDPM Indian Institute of Information Technology Design & Manufacturing, Jabalpur Rajiv Gandhi Institute of Technology, Govt. Engineering College, Kottayam Giani Zail Singh College of Engg. & Tech. Bathinda (Punjab) Government College of Engineering, Amravati Netaji Subhas Institute of Technology, New Delhi Kamla Nehru Institute of Technology, Sultanpur Pondicherry Engineering College, Puducherry Sardar Patel College of Engineering, Mumbai Veermata Jijabai Technological Institute (VJTI), Mumbai Sant Longowal Institute of Engg. & Tech. (Deemed University), Punjab Indira Gandhi Institute of Technology, Sarang, Odisha Harcourt Butler Technological Institute, Kanpur TKM College of Engineering, Kollam (Kerala)
Interview Date 08-03-13 11-03-13 12-03-13 13-03-13 14-03-13 15-03-13 18-03-13 19-03-13 20-03-13 21-03-13 22-03-13 25-03-13 26-03-13 27-03-13 28-03-13 29-03-13 01-04-13 02-04-13 03-04-13 04-04-13 05-04-13 08-04-13 09-04-13 10-04-13
Day Friday Monday Tuesday Wednesday Thursday Friday Monday Tuesday Wednesday Thursday Friday Monday Tuesday Wednesday Thursday Friday Monday Tuesday Wednesday Thursday Friday Monday Tuesday Wednesday
XV. DEPARTMENTS & FIELDS OF SPECIALIZATION AT VARIOUS INSTITUTIONS

The d e p a r t m e nt s offering a d m i s si o n to Ph.D. degree programmes at various institutions and the fields of specialization in the departments are listed in the Tables. Specializations mentioned indicate only areas of interest and are not exhaustive. There may not be admissions open to all the areas indicated, and candidates, if found suitable, may be admitted to related areas also. The details given are subject to variation and change from time to time and only those operating in the respective institutions at the time of actual admissions are applicable. Candidates desirous of more information on the matter may write to the individual institution or visit their website.
15
1.
Indian Institute of Science, Bangalore 560 012 BG
In all cases, the minimum eligibility is Second class or equivalent grade in the Bachelors as well as in the Masters degree.
Code
Department
Fields of specialization
Theoretical and Experimental Fluid Mechanics, Applied Aerodynamics, Hypersonic and High Enthalpy Flows, Computational Fluid Dynamics, Flight Mechanics of Aircraft and Helicopters; Dynamics and Control of Aerospace Vehicles, Orbital Mechanics, Space Robotics, Guidance, Avionics, Radar and Electromagnetic Systems, Parallel/Distributed Processing and Neural Networks Applications, Optimization & Estimation Techniques in Aerospace Systems; Aerospace Propulsion, Basic and Applied Combustion, Experimental and Computational Studies on Reactive Flows, Combustion of Propellants, Composite Structures, Smart structures, Non-destructive Evaluation, Finite Element Methods, Fracture Mechanics, Structural Integrity and Reliability, Structural Dynamics and Aeroelasticity, Rotor CraftS Dynamics.
Minimum Qualification
BGAE01
Aerospace Engineering
ME/M.Tech. or equivalent degree in Aerospace, Mechanical, Electrical, Electronics, Chemical, Computer Science, Civil.
BGAS01
Centre for Atmospheric & Oceanic Sciences
Monsoon Dynamics, Tropical Convection and Satellite Meteorology, Dynamics of Oceans, Coupled Ocean-atmospheric Systems; Climate Modeling, Laboratory Modeling, Planetary Boundary Layer, Stochastic Modeling, Aerosols and Climate.
ME/M.Tech. or equivalent degree in Mechanical, Civil/Aerospace / Chemical Engineering, Atmospheric and Oceanic Sciences.
BGCH01 Chemical Engineering
Biochemical Engineering; Catalysis, Colloids, Complex Fluids; Environmental Pollution, Fuel cells, Gas Hydrates, Granullar Flow, Microfluidics, Modelling of Diseases, Molecular modeling, process modeling, Nano structures, Nano architectures, Optimization & Control, Polymer degradation, Self assembled systems, Simulation techniques, Solar energy, Suspensions, Super Critical fluids, Theoretical Biology, Water Treatment.
ME/M.Tech. or equivalent degree.
BGCE01
Geotechnical Engineering: Earthquake Geotechnical Engineering, Geo environmental Engineering, Physico-chemical Aspects and Constitutive Modeling of Soil Behavior, Foundations, Earth and Earth Retaining Structures, Ground Improvement Techniques, Geosynthetics, Mechanics and Granular Media, Numerical Modeling of soils and rocks, Risk and Reliability Assessment of Geohazards, Soil Dynamics, Rock Mechanics. Water Resources and Environmental Engineering.: W ater Resources Systems, Climate Hydrology, Surface and Ground W ater Hydrology, Vadose Zone Hydrology, Open Channel Flows, Urban W ater Distribution Systems, River Mechanics, Environmental Hydraulics, W ater Quality Modeling, Contaminant Transport in Surface and Ground W ater Flows. Structural Engineering: Structural Mechanics, FEM Techniques, RC and Prestressed Concrete, Masonry Structures, Structures Dynamics, Non-Linear and Stochastic Dynamical Systems, Earthquake Engineering, Structural Safety, Fracture Mechanics of Concrete, Materials in Civil Engineering. Low Carbon Materials, Structural Health Monitoring. Theoretical Computer Science: Algorithms, Complexity Theory Coding theory, Cryptography, Formal Verification, Graph theory, Logic Randomized Algorithms, Computational Geometry, Computational Topology. Systems and Software: Compilers, Computer Architecture, Computer Networks, Databases, Distributed Computing, Embedded Systems, EnergyAware Computing, Mobile & W ireless systems, Operating Systems, Real-Time OS, Storage Systems, Systems Security, Visualization, Graphics, Programming Languages. Intelligent Systems: Auctions and Mechanism design, Bioinformatics, Data Mining, Electronic Commerce, Game Theory, Intelligent agents, Machine Learning, Pattern recognition, Reinforcement Learning, Stochastic Control and Optimization, Stochastic Simulation. ME/M.Tech. or equivalent degree in Civil.
Civil Engineering BGCE02
BGCE03
BGCS01
Computer Science and Automation
ME/M.Tech. or equivalent Degree in Computer Science and / or Engineering, or Electronics or Electrical Communication Engineering or Electrical Engineering or Information Technology or Information Sciences or allied disciplines.
16
Code
Department
Communication and Networking: Information theory, distributed joint source-channel coding; error control coding including space-time codes, network coding, coded modulation and pseudorandom sequences, W ireless mobile communication, CDMA, multiuser detection, , MIMO, OFDM, cooperative communications. Communication networking: modeling, analysis, optimization and control of resource allocation in wireline and wireless networks; scheduling in networks; quality of service in heterogeneous networks; cross-layer design in wireless networks; energy efficient protocols. Wireless sensor networks: Self organization and distributed signal processing, system architectures for various applications, distributed computing algorithms for sensor networks. Communication protocols-specification and verification, AI applications to communication networks and their management, mobile agents. Multimedia communication. Nanoelectronic and VLSI: Nano-CMOS technology, non-classical transistor design, transistorvariability in nanoelectronics, adaptable circuit desing, integrated MEMS sensors, VLSI architectures for high performance computing, low power techniques in hardware for embedded systems and system-on-chip, formal and informal verification technologies, fault-tolerant and self-healing system design, bio-electronics, Technologies for pattern recognition classification, and machine learning. Photonics: Fibre Optics communication, DW DM networks, Integrated optics, MOEMS; Fiber Bragg grating Sensors, Nano-photonics, Bio Photonics. Signal Processing: Speech and audio coding, speech recognition and enhancement, Music classification, auditory modes and Hearing aids. W avelets: application to data transmission, signal detection and denoising. Multirate signal processing, filter bank design. Statistical signal processing; signal detection and estimation, space-time (MIMO) signal processing algorithms with applications to wireless communications, underwater acoustic systems, acoustic signal separation. Biomedical signal processing. Processing of biomedical signals using nonlinear dynamical techniques. Abnormality detection in ECG and EEG signals. Connectivity study of networks in the brain. Microwave Engineering: Passive and active circuits (RF and microwave). Microwave antennas, Fractal designs in electromagnetic, MEMS and micromachining (RF MEMS), Composite materials for microwave applications, Computational electromagnetics. Power Systems and Power Electronics: Computer Based Analysis, Design, Control & Protection of Power Systems; Energy Systems; Distribution Systems; Intelligent System Applications to Power Systems; Reactive Power Control, Voltage Stability, FACTS Applications, Deregulated Power System Management, Power Electronics & Drives; Power Quality, Switched Mode Power Supplies. High Voltage Engineering: EHV Power Transmission, Overvoltage Protection, Lightning Protection, Computational Electromagnetics, Gas Insulated Systems, Partial Discharges, Insulation Engineering, Condition Monitoring and Diagnostics for HV Power Apparatus, Nanodielectrics. System Science and Signal Processing: Machine Learning and Data Mining; Computer Vision, Image/Video Processing; Sensor Networks; Real Time and Fault Tolerant Systems; DSP and Multimedia; Bio Signal Processing; Bio Medical Imaging; Bioinspired Signal Processing. Power Electronics & Drives: Control of inverters, multi-level inverters for drives, renewable energy, power supplies Signal and Information Processing: Information theory, coding and signal processing for magnetic and optical nano- memories, mathematical biology and applications, quantum information processing and systems architecture. Communication Networks: Physical layer security, network science, peerto-peer and delay-tolerant networking, function computation on networks, optimal data transport in sensor, wireless and mesh networks, modelling energy harvested networked embedded and cyber physical systems, Internet to Things. Semiconductor Device modelling, cancellation and suppression VLSI, Mechatronics, Noise
BGEC01
Electrical Communication Engineering
ME / M.Tech. or equivalent degree in Electrical Communication, Electronics and Communication, Telecommunication, Electronics, Electronic Instrumentation, Biomedical Engineering, Computer Science and Engineering, Electrical Engineering.
BGEE01
Electrical Engineering (Power Systems and Power Electronics, Systems Science & Signal Processing and High Voltage Engineering)
ME / M.Tech. or equivalent degree in Electrical, Electronics Communication, High Voltage Engineering, Instrumentation, Computer Science, Information Technology or Biomedical Engineering Or related disciplines.
BGED01
Electronic Systems Engineering
ME / M.Tech. or equivalent degree with Electronics as one of the subjects of study.
17
Code
Department
Sensors and related instrumentation, Tomographic imaging for biomedical and other applications, Lasers and optical metrology, Switching devices for information storage, Mass spectrometry, Photovoltaics, Electrical and thermal contact resistance, Microeletromechanical Systems (MEMS), FibreBragg Grating Sensors; Plasma processes & thin films
ME / M.Tech. or equivalent degree OR M.Sc. or equivalent degree in Physics / Applied Physics / Materials Science
BGIN01
Instrumentation and Applied Physics
BGMG01
Management Studies
Bayesian Statics, Decision Support Systems, Empirical Finance, Energy & Environmental Policy and Management, Entrepreneurship, Human Resource Management, Industrial Economics, Innovation Management, Intellectual Property Commercialization, Knowledge Management, Logistics and Supply Chain Management, Marketing, Operations Management, Operations Research, Organizational Behavior, Project management, Public Policy, R&D Management, Reliability Theory, Strategic Management, Technology Management.
BE/B.Tech or equivalent degree in any discipline or Masters degree in Economics, Commerce, Mathematics, Statistics, Psychology, Social Work, Operation Research, Computer Science/ Application or MBA or equivalent
BGMR01
Materials Research Centre
Preparation of Advanced Materials by Physical, Chemical and Nonequilibrium Routes. Feroelectric and Semiconducting Thin Films, Multilayers and Hard Coatings; Nanomaterials and Composites, Self Assembly and Nanopatternings; Theoretical and Computational Materials Science. Ferroic materials, glasses and glass-ceramics, Electro and Nonlinear Optics. Magnetic materials, Biomaterials. Partial Differential Equations, Homogenization, Controllability, Nonlinear Dynamics and Chaos, Time Series Analysis with Applications to Neuroscience, Applied Probability and Stochastic Processes, Stochastic Control, Stochastic, Dynamic Games, Random matrix theory, Functional Analysis, Operator Theory, Algebraic Topology, Differential Topology, Commutative Algebra, Algebraic Geometry, Harmonic Analysis, Several Complex variables, Differential Geometry, Mathematical Finance, Low Dimensional Topology, Numerical Analysis
M.Sc. or equivalent degree in Materials Science, Chemistry or Physics or ME/ M.Tech/ MSc. (Engineering or equivalent degree in Materials Science/ Engineering, Ceramic Engineering and Technology. M.Sc. or equivalent degree in Mathematics, Statistics, Physics or any branch of Mathematical Sciences or BE / B.Tech. or equivalent degree (provided they have good aptitude for Mathematics).
BGMA01 Mathematics
BGME01
Experimental Stress Analysis and Fracture Mechanics, Tribology and Noise Control; Mechanisms, Robotics and CAD, Fluid Mechanics, Turbulence,Heat Transfer, Combustion, Internal Combustion Engines, Refrigeration and Air Conditioning, Dynamics, Micro Electro-Mechanical Systems (MEMS), Nano Tribology, Structural Optimization and Design, Mechanical Properties of Materials, Bio- mechanics.
ME / M.Tech. or equivalent degree or M.Des in Product Design & Manufacturing or equivalent.
BGMT01
Materials Engineering
Mechanical Behavior of Metals, Ceramics, Polymers Glasses and Thin Films, Biomaterials Engineering, Polymer Nanocomposites, Organic Electronics Sensors. Mineral Processing, Biohydrometallurgy, Extractive Metallurgy, Process Modeling Physical Metallurgy, Phase Stability and Transformation, Diffusion, Solidification. Computer Aided Engineering Tools for Product Design, Vehicle Crashworthiness and occupant Safety, Occupational Health and Safety, Product Safety, Computer Aided Ergonomics, Human Physiology, Digital Human Modelling, Biomechanics, Kinesiology, Biosensors, Computer Aided Fit and Usability Studies, Haptics Integrated Design interfaces, knowledge Management, Product Life Cycle Management, Artificial Intelligence in Design, Design for Environment, Design Creativity Collaborative Design, Design Synthesis, Requirements Engineering, Design Methodology.
ME / M.Tech. or equivalent degree in Metallurgical, Mineral, Chemical, Ceramics or Mechanical, Electrical, Electronics or Materials Science/ Engineering or Biotechnology, Polymers
BGPD01
Product Design
M.Des in Product Design & Manufacturing; ME/M.Tech or equivalent degree in Design or any branch of engineering including Architecture, Instrumentation, and computer Science.
18
Code
Department
(A) Experimental studies in I. II. III. Condensed Matter Physics Atomic, Optical Physics, and X-ray Crystallography of Bimolecular Structures,
BGPH01
Physics
Specific areas include: Raman and other Spectroscopy, Fast Ionic Conductivity, Manipulation of Matter by Light, Laser Cooling and trapping of atoms, Ion trapping, Precision Laser Spectroscopy, Magnetism, Spintronics, Magnetic thin films, Magneto-transport, quantum transport in low- dimensional and disordered materials, the metal-insulator transition, Magnetic Resonance Phenomena, Nano science and nanomaterials, Superconductivity in bulk as well as thin films, Semiconductors, Ferro electricity, Crystal Growth Studies, Nonlinear Optical Materials, Phase Transition Studies, High Pressure and Low Temperature Studies, Study of Low Dimensional Materials, Amorphous Systems, Soft Condensed Matter: colloids, surfactants and biological materials, Peptide and Protein Crystallography, Complexation Studies and Drug-Nucleic Acid Interactions, Molecular Modeling, Database Analysis, Polymer Physics, Surface X-ray scattering, surface phase transitions, Thermoelectrics.
ME / M.Tech / M.Sc(Engineering or equivalent degree or M.Sc. or equivalent degree in Physics, Biophysics, Biotechnology, Mathematics, Chemistry or Polymer Science or B.E./ B.Tech. or e q u i v a l e n t degree or B.Sc or equivalent degree followed by AMIE, Grad, IETE, AMIIChE, AMIIM, AMAeSI.
(B) Theoretical Studies on a variety of aspects of condensed matter physics, in particular; Strongly Correlated Systems, Quantum many-body theory and magnetism, exotic order and quantum criticality; Phase transitions, equilibrium statistical physics; Disordered and Amorphous Systems, the glass transition, neural networks, Spatiotemporal Chaos and Turbulence in fluids, plasmas and cardiac tissue; Soft condensed matter: colloids, surfactants, membranes, liquid crystals, vortex lattices; biological physics: the mechanics of living matter; Molecular modeling of soft and bio-materials Compiler Optimization, Computer Aided Design for VLSI Systems, Computational Electromagnetics, Computer Architecture, Database Systems, Embedded System-on-Chip Architectures, Grid Applications, Grid Computing and Grid Middleware, High Performance Computing, Graphics and Scientific Visualisation, Mathematical Software /Libraries, Multimedia, Network Security, biomedical diagnosis/imaging, photonics,Pervasive Computing, Quantum Computing, VLSI testing, verification, and fault tolerant computing Scientific Computing.
BGSE01
Super Computer Education and Research Centre
ME/M.Tech. or equivalent degree in any discipline
BGST01
Centre for Sustainable Technologies
W ater quality and sustainable supply; W ater and sanitation; Renewable energy; solar, biomass combustion and gasification, biomethanation, biofuels, etc.; Energy planning, demand side management, energy efficiency; Alternative building technologies and materials, energy efficient and environmentally sound technologies; Climateresponsive architecture/building technology; Building Integrated Photovoltaics (BIPV) and Green Buildings; Building-comfort studies in tropical regions; W aste management; reuse and recycling; Natural Resources Management; Climate change mitigation; Aquatic biodiversity; Ecotoxicology and remediation.
M.Arch or M.E./M.Tech/M.Sc. (Engg.) In Mechanical, Civil, Chemical including Renewable Energy, Environmental Engineering, Energy Studies or MSc (Environmental Sciences)
19
2.
Indian Institute of Technology Bombay, Mumbai 400076 BM
In all cases, the minimum eligibility is a First class or equivalent (Min. 60%) Masters Degree in Engineering / Technology (55% for SC/ST) OR a First class or equivalent (Min. 60%) Masters degree in Science (55% for SC/ST) or a first class or equivalent (Min. 60%) in Bachelors degree in Engineering / Technology (55% for SC/ST).
Code
Department
Masters degree in Aerospace, Mechanical, Civil Engineering Electrical/ Electronics. (If academic credentials are exceptional and the candidate has proven research capabilities, Bachelors degree (First Class) in the mentioned disciplines may be acceptable). Graduates with Electrical / Electronics background will be considered for Dynamics & Control specialization only.
BMAE01
Aerodynamics Dynamics and Control Aerospace Propulsion Aerospace Structures
BMCE01 BMCE02 BMCE03 BMCE04 BMCE05 Civil Engineering (Code no. of specialization to be indicated in the datasheet)
Transportation Systems Engineering Geotechnical Engineering Water Resources Engineering Structural Engineering Remote Sensing Research Areas i. Process Systems Engineering: Process Simulation, Optimization, Process Integration and Scheduling, Energy Conservation and Optimal Resource Management. Artificial Intelligence and Mathematical Modelling, Multi-scale Modelling, Systems Identification and Process Safety Analysis, Nonlinear control, fault diagnosis. Biotechnology & Bio-Systems Engineering: Metabolic & Genetic Engineering, Bio-separations, Bioinformatics, Systems Biology, Drug Discovery, Enzymology, Bioprocess Development. Vermiculture for Water Management, Dehydration of Food Systems, Controlled Atmosphere Storage, and Process Development of Food Systems. Materials Engineering: Polymer materials, Polymer Reaction Engineering Polymer Processing, Polymer Physics, Polyurethane , Rubber, Polymer Rheology, Ceramics, Polymer Biomaterials, Drug Deliver, Food Engineering Microscopy Nanocomposites, Statistical Thermodynamics, and Supercritical Fluids. Catalysis & Reaction Engineering: Catalysis, Multiphase Reaction, Bio-reaction Engineering and Reactor Modelling. Process intensification & reactive distillation. Transport, Colloids & Interface Science: Fluidization, Granular flows. Power Mixing, Membrane Separations, Rheology of Complex Fluids, Colloids, Sol-gels, Emulsions & Foams, Paints and Coatings, Microstructural Engineering, Aerosols, Electrohydrodynamics, Fluid Mechanics & Stability, Computational Fluid Dynamics, Heat & Mass transfer, Porous media, and Surfactants. Energy and Environment: Climate change, Coal Gasification, Energy Integration, Green Engineering, Renewable Resources, Waste Management, Pollution Control, Air Pollution Prediction & Control and Vermiculture. Masters degree in Engg / Technology or Bachelors degree in Engg / Tech. or Masters degree in Science disciplines consistent with the research areas of the departments M.Tech or Equivalent degree in Civil Engineering The minimum eligibility is a First class or equivalent (Min.60%) Masters Degree in Engineering/Technology ( 55% for SC/ST)
ii.
iii. BMCH01 Chemical Engineering
iv.
v.
vi.
BMCS01
Computer Science and Engineering
Computer graphics, computer vision, image understanding and retrieval, Database and information systems, hypertext mining and information retrieval, data dissemination networks, Programming languages and compilers, Computer networks, performance modeling and distributed systems, Algorithms, combinatorics, graph theory, Artificial Intelligence, natural language processing, machine learning, Software engineering, Formal specification, design and verification biologically inspired computing.
M.E / M.Tech. in CS&E with at least 60% marks or M.E /M.Tech. in any branch with 5 years teaching experience in CS&E.
20
Code
Department
Theoretical / Computational Chemistry Main Group - Transition Metal Chemistry. Organometallics Electrochemistry / Conducting Polymers Ultrafast Spectroscopy Organic Synthesis Peptide Synthesis, Enzyme Mechanism = Homogeneous / Heterogeneous Catalysis Physical inorganic Chemistry Protein Folding. Theoretical Organic Chemistry Photochemistry, Photobiology Statistical Mechanics Chemical & Biosensors, Single Molecule Spectroscopy, Structural Biology, Bioorganic, Bioorganic and Biophysical chemistry. Mineralogy Geochemistry and Ore Deposits, Structural Geology, Igneous and Metamorphic Petrology, Engineering Geology, Hydrogeology and Environmental Geology, Sedimentology, Stratigraphy and Micro-Paleontology, Geomorphology and Remote Sensing, Mathematical Geology and Geostatistics, Rock Magnetism and Geology, Seismology and Exploration Geophysics, Geothemal Energy Resources, Geomagnetism, Well- logging, Petrophysics.
M.Sc. or equivalent degree in Chemistry/ Physics/ Biochemistry / Life Sciences / Pharmacy / Materials Science / Biotechnology. Candidates with Master degree in science must have valid GATE score to become eligible for the Teaching/ Research Assistantship provided by the Institute.
BMCY01
Chemistry
BMES01
Earth Sciences
M.Sc / M.Tech degree in Geology/ Geophysics / Geo-Chemistry
BMEE01
Communications: Communication Systems, Communication Networks and Internet, Computational Electromagnetics, Image Processing and Computer Vision, Microwaves, RF and Antennas, Multimedia Systems, Optical Communication and Photonics, Signal Processing, Speech Processing, Wireless and Mobile Communication, Information Theory and Coding, Magnetic Resonance Imaging. Control & Computing: Linear systems Theory, Optimal Control & Optimization, Modeling and Identification of Dynamical Systems, Control of Distributed Parameters Systems, Non-Linear Systems, Modern Filter & Network Theory, Behavioral Systems Theory, Computational Methods in Electrical Engineering Software and System Reliability Cryptography and Security, GPU-based Computing. Power Electronics & Power Systems: FACTS HVDC and Power Quality, Distributed Generation, Power System Restructuring, Wide Area Measurements and System Protection, EMI/ EMC, Coupled Field computations, Electrical Machines; Modeling, Analysis, Design and Control, Special Machines, Power Electronic Converters, Electric Drives, Power Electronics for Non-Conventional Energy Sources, Reliability in Power Systems and Power Electronic Systems, Smart Grids for Energy Harvesting.
I. For General category students and/ or for students where no concession in academic performance is called for eligibility requires meeting ANY ONE of the following criteria as regards performance in the qualifying degree. 1. a minimum of 60 percent marks in the final academic year of the programme. a minimum of 60 percent marks in aggregate or as specified by the university (any one of them) a first class as specified by the university. a minimum CPI of 6.0 on the scale of 10; with corresponding proportional requirements when scales are other than on 10 for example, on a scale of 8, the minimum will be 4.8
2.
BMEE02
3.
4.
BMEE03
For Students from the SC/ST category the corresponding criteria are: 1. a minimum of 55 percent marks in the final academic year of the programme a minimum of 55 percent marks in aggregate or as specified by the university (any one of them) a first class as specified by the University. a minimum CPI of 5.5 on the scale of 10; with corresponding proportional requirements when the scales are other than on 10 for example, one a scale of 8, the minimum will be 4.4
Microelectronics: Devices & IC Technology, Reliability of Electronics Devices and Circuits, Device Simulation and Modeling, VLSI and System Hardware Design, CAD Tools, MEMS Design and Technology (including Bio-MEMS), Flash Memory Devices, Organic Semiconductor Devices, CMOS Devices, Spintronic Devices, Photovoltaic Devices, Material Growth and Characterization. BMEE04
2.
3. 4.
21
Code
Department
II. The qualifying degrees are as following B.E/B.Tech/M.E./M.Tech.
BMEE05
Electronics Systems: Electronic Instrumentation, Signal Processing Applications, Speech and Audio Processing, Biomedical Electronics, Embedded System Design.
Biomedical Engineering, Computer Science, Computer Science and Engineering, Computer Engineering, Electrical Engineering, Electronics Engineering, Telecommunications Engineering, Instrumentation Engineering Engineering Physics, Materials Science and Engineering. Master of Science (M.Sc) Mathematics, Electronic Sciences Physics,
III. The admission of a student as a Ph.D Candidate shall be confirmed only after he/she has successfully completed the prescribed coursework and the comprehensive qualifier examination. A student who is unsuccessful in the comprehensive qualifier even after the prescribed number of attempts shall have to discontinue the Ph.D Programme.
Algebra: Commutative Algebra, Hilbert functions, Blowup algebras, Local cohomology, Hopf, Algebras, Coxter Groups. Analysis: Functional Analysis, Operator Theory, unbounded subnormals, Hilbert modules, Numerical Functional Analysis, Approximate Solutions of operator equations and eigenvalue problems, Spline Theory, Numerical Functional Analysis, Real Analysis, Mean periodic functions, Generalized integrals. Combinatorics: Combinatorics, Posets, Generating functions, Polyhedral Combinatorics. Geometry and Topology: Algebraic Geometry and Combinatorics, Schubert varieties, Linear codes, Varieties over finite fields, Algebraic Topology, Operads, Differential Geometry, Harmonic Manifolds, Algebraic & Differential Topology, Topology of Matrix varieties. Mathematics Number Theory: Number Theory, Automorphic Forms, Representation theory of p-adic groups. Representations of Algebraic Groups, L-functions, Converse Theorems. PDE and Numerical Analysis: Numerical Analysis, Applied Mathematics, Finite Element Methods, Finite volume methods. Hyperbolic systems of quasilinear partial differential equations, Non-linear waves, Partial Differential Equations, Shock waves in hyperbolic systems of conservation laws, partial integro-differential equations, Visco-elastic fluid-flow problems. Statistics and Probability: Statistical Data mining, Computational Biology, Biostatistics, Bioinformatics, Probabilistic optimization problems in Molecular Biology, Reliability Theory, Industrial Statistics, Construction of reliability test plans, Statistical Inference, Geostatistics, Modelling bivariate distributions, Stochastic Differential Game Theory, Risksensitive control theory, Stochastic control Mathematical Finance, Applied Probability, Poisson and compound poisson approximations, Estimation after selection, Reliability test plan.
BMMA01
First Class Master degree in Maths/ Statistics/ Computer Science
22
Code
Department
Thermal and fluid Engineering: Convective and Radiative Heat Transfer, Two-Phase Flow, Design of Thermal Equipments and Systems, Numerical Techniques, Modeling and Analysis, combustion and Flames, Fuel injection, Petrol and Diesel Engines, Power Plant, Nuclear Engineering, Reactor Neutronics Reactor Heat Transfer, Steam Generator, Fluid Mechanics, Fluid Machinery, Hydraulic controls, Micro Fluidics, Fuel Cells, Computational Fluid Dunamics, Refrigeration, AC Systems Cryogenics, Absorption, Heat Pumps
For all fields of pecialization: i) B.Tech / M.Tech for equlvalent degree in Mechanical Engineering with First Class (or 60% minimum) at UG & PG levels (55% for SC / ST)
BMME01
BMME02
Design Engineering: Stress Analysis using Analytical and Numerical ii) B.Tech. / M.Tech. degree or equivalent in Production Methods, Studies of Failure Due to Fatigue and Fracture, Fracture Engineering / Industrial Mechanics, Application of Finite and Boundary Element Methods, Engineering / Aerospace System Modeling, control and Automation, Kinematics, Machine Engineering with First Class ( or Dynamics, Synthesis of Mechanisms, Robotics, Mechatronics, 60% minimum) at UG & PG levels Tribology Design of Elements and Systems, Optimization, CAD, (55% for SC / ST) may be Interactive Graphics, Vibration, Noise and Acoustics, MEMS, Vehicles considered. Dynamics, Smart Materials and Structures, NDT. Manufacturing Engineering: Machining, Casting, Welding and Forming Processes. Tool Design, Rapid Prototyping and Tooling, iii) Candidates with an outstanding Modeling and Simulation of Manufacturing Processes, Manufacturing academic record and a PostAutomation and Control, CAD/CAM, CNC, Feature Based Modeling, Graduate degree in other Computer Aided Process Planning Intelligent Product Design and branches of Engineering / Manufacturing Applications of AI in Manufacturing, Flexible Technology may also be Manufacturing Systems, Modeling and simulation of Manufacturing considered for research areas Systems, CIMS product Lifecycle Management, Inventory and Supply consistent with their academic Chains Management, Quality Engineering, Planning Scheduling background and special interests Queuing, Management of Operations, Maintenance Management. of the Development. Kinetics of metal extraction & refining processes, Iron and steelmaking processes, physical and mathematical haracte of processes, welding and joining processes, levitation materials processing. Phase Transformation, Thermomechanical processing Grain growth and texture development, Non-equilibrium solidification. Deformation and microstructural evolution including superplasticity sheet metal forming. Mechanical alloying power consolidation and sintering mechanisms. Zirconia and alumina ceramics, nanocrystalline materials, metal-matrix and metal, ceramic and polymer matrix composites, ceramic matrix composites Metallic magnetic alloys, gaint, magnetoresistance and colossal magnetoresistance, oxide ceramics, material design and characterization, grain boundary and interfacial engineering. Semiconductor and dielectric thin films, Opo electronic and photovoltaic devices, MEMS, plasma processing, chemical vapor deposition, physical vapor deposition II VI compound semiconductors and heterostructures Oxide and sulphate ionic conductors, polymeric ionic conductors, oxide superconductors, Dielectric & magnetic ceramics, Nano Technology Polymers and polymer matrix composites. Biomaterials, Microwave Materials. Stress Corrosion Cracking, Corrosion fatigue, wear of materials, fracture mechanics, failure analysis, Aqueous and high temperature corrosion. Surface modification by plasma spray coatings for thermal barriers wear and corrosion resistance. Sol-gel processes. Instrumentation and process control in material processing. Passivity Environmentally assisted cracking, weld decay, Protective coatings development of new alloys. High Temperature Oxidation and Sulfidation. Surface Modifications. High Temperature Coatings Using Thermal Spray and Laser Treatment. B.Tech / M/Tech. in Metallurgical Ceramic, Chemical, Electrical, Electronics, Electrochemical Engineering/ Physics, Materials Science, Mechanical OR M.Sc. in Chemistry M.Tech. in Surface Science and Colloids.
BMME03
BMMM01
Metallurgical Engineering and Materials Science
23
Code
BMPH01 BMPH02 BMPH03
Department
Condensed Matter Physics (Theory) Condensed Matter Physics (Experimental) Laser, Optics and Spectroscopy
In all cases the minimum eligibility is a First Class or equivalent (Min. 60%) Masters Degree in Engineering/ Technology (55% for SC/ST) OR a First Class or equivalent (Min.60%) Masters degree in Science (55% for SC/ST) or a First Class or equivalent (Min.60%) in Bachelors degree in Engineering/ Technology (55% for SC/ST)
Physics BMPH04 BMPH05 BMPH06
Nuclear Physics (Experimental) Particle Physics Statistical Physics Economics: Industrial Economics, Money, Banking and Finance, Economic Systems, Gandhian Thought, Managerial Economics, Applied Econometrics, Economic Development, Environmental Economics, International Trade & Finance International Business Indian Economy, Corporate Investment and Econometric Application, Financial Economics & Time Series Analysis. English: Postcolonial Literature, Womens Literature, Modern Critical Theory, Aesthetics, Linguistics & ELT, Indian And Western Drama, Language and Cognition, Theory of Novel, Cultural Studies. Philosophy: Cognition Science, Philosophy of Language, Contemporary Western Philosophy, Metal-Ethics, Philosophy of Mind, Buddhism, Classical Indian Philosophy, Comparative Philosophy, Comparative Religion, Vedanta Philosophy, Applied Ethics, Modern Western Philosophy, Modern Indian thinkers. Psychology: Stress Management, Womens Studies and Psychology, Social Psychology, Organizational Behavirour, Human Resource Development, Health and Clinical Psychology. Psychosomatic Disorders, Stress & Coping, Subjective Well-being. Ergonomics, Cross-Cultural Personality, Culture and Ethics in Organizations, HR issues in the B.P.O. Industry in India. Cognitive and Human Factor Psychology, Neuro Psychology, Dyslexia, Consumes Behaviour. Sociology: Political Sociology, Sociology of Development, Rural Sociology, Environmental Sociology, Sociology of Science, Technology and Society, Sociology of Development and Change, Urban Sociology, Sociology of Religion, Political Sociology. Global Studies and International Relations, Sociology of Stratification, Caste Studies, Sociology of Social Movements, Sociology of Development and Environment Studies. Sanskrit: Paninian grammar, Philosophy of Language, Indian Astronomy / Mathematics
M.A. / M.Com. / M.Sc. /B.Tech. .with minimum of 60% marks for equivalent grade) at the qualifying examination. In case of SC/ST category of Candidates, it is 55%
BMHS01
Humanities and Social Science
BIOTECHNOLOGY (BT) Research Areas: Enzyme kinetics and enzyme secretion, microbial metabolism and regulation, aromatic hydrocarbon metabolism and genetic engineering, enzyme inhibitor design, peptide synthesis, protein structure, function and engineering; yeast molecular biology, transcriptional regulation of gene expression; microtubule dynamics and cancer chemotherapy, immunology, signal transduction, Glycobiology; molecular and membrane biochemistry; proteomics and systems biology, bacterial cell division, protein aggregation and neurodegenerative diseases, computational biology of nucleosome dynamics, Chromatin assembly and statistical dynamics, cytoskeletal dynamics, chromosome segregation during mitosis and meiosis in yeast. Regulation of gene expression in the malaria parasite, bioinformatics of parasite genomes.
Minimum Eligibility for Admission: I) First Class or 60% marks (55% for SC/ST) in M.Sc or equivalent degree in subjects related to Life Sciences / Physics / chemistry or B.Tech Biotechnology with a) A valid GATE score (eligible for Institute TAship / RAship) or A valid CSIR / UGC / DBT JRF (eligible for FA category) or b) A valid ICMR JRF (not linked to ICMR project) (eligible for FA category) OR c) Two years of relevant post M.Sc research experience (eligible only for project positions) OR d) UGC / CSIR (Lectureship) eligible only for project position ii) First Class or 60% marks (55% for SC/ST) in M.Tech of equivalent degree in Biotechnology.
BMBS01
Bioscience & Bioengineering
24
Code
Department
BIOMEDICAL ENGINEERING (BME) Research Areas: Currently fundamental and applied research is being conducted in the broad areas of. Bioinstrumentation for diagnostics and therapeutics, Biomaterials, prostheses and medical devices, Physical system modeling and analysis. Bioinstrumentation for early detection of diseases, Biomedical transducers and sensors including biosensors and bio MEMS devices, Cardiac electrophysiology and muscle mechanics, Development and validation of novel biomaterials and implantable devices, Neurophysiology, prosthetic devices including aids for the handicapped, Signal processing, Telemedicine and knowledge based systems. Nano medicine, Drug delivery, Nano biotechnology.
Minimum Eligibility for Admission: M.Tech / M.E. or B.Tech / B.E. in Biomedical, Chemical, Computer Science, Electrical, Electronics, Telecommunications, Instrumentation and Mechanical Engineering, and Engineering Physics. M.Sc. or equivalent in biochemistry, Biophysics, Biotechnology, ceramics, Chemistry, Electronics Egronomics, Material Science, Mathematics, Molecular Biology, Physics and Physiology First Class / Division in MBBS / BDS degree, occupational Physiotherapy, with AIMS (PG Entrance Test) / MCI entrance examination for MD / MS (for Medical graduate) / MBBS with MD / MS, MDS M.Pharm, B.Pharm with entrance examination MPAT Applicants desiring Institute financial support should have cleared GATE (for engineering and science graduates) or AIIMS / MCI / GIPMER / PGI- Chandigrach / AFMC Pune post graduate entrance examinations. Eligibility / rank certificates are required for all such entrance examinations. * B Pth with M Pth with MOTh
BMBS02
BMEV01
Environmental Science and Engineering
Environmental Monitoring, Industrial Air & Water Pollution Control, Solid and Hazardous Waste Management, Air & Water Quality Modeling, Environmental Systems Optimization, Environmental Microbiology & Biotechnology, Bioremediation, Indoor Air Quality, Aerosol Science and Technology, Environmental Impact Assessment and Global Issues.
Master of Technology/Engineering Bachelor of Engineering degree in Agricultural, Chemical, Civil, Energy, biotechnology, Environmental, Mechanical Metallurgical and Mining Engineering or a Master of Science degree in Atmospheric Science, Biochemistry, Biotechnology, Chemistry, Earth Sciences, Environmental Toxicology, Environmental Sciences, Meteorology, Microbiology and Physics for MSc graduates, Mathematics is mandatory at Higher Secondary / Intermediate / (10+2) level.
BMIO01
Industrial Engineering and Operations Research
The group is interested in research related to modeling, quantitative analysis and optimal resource allocation from decision problems in deterministic and stochastic contexts. Broad areas of application are in supply chains, logistics, transport including railways, manufacturing systems, finance, services, infrastructure and other industrial systems; application of quantitative methods in quality and maintenance management systems; development and application of decision support, intelligent and knowledge-based systems. The specific problems of research interests include: production planning, scheduling and control systems; management of inventories in production, distribution and service systems; industrial scheduling, facilities planning, project management, quality management, materials management and productivity management; operations planning and control related to CMS, MRP, ERP, flexible assembly, FMS, JIT; Supply chain analysis, reverse logistics, closed-loop supply chains and RFID applications, product variety management.
a) First class Master's degree in any b r a n c h of Engineering with adequate exposure to Industrial Engineering and Operations Research. b) First class M.Sc. in Mathematics, Statistics or Operations Research with excellent academic record
c) First Class Bachelors degree in any branch of

Engineering with an excellent academic record.
25
Code
Department
Operations Research applications in management of technology and resource allocation; Convex optimization; mixed-integer programming; Markov decision processes; optimal control in deterministic and stochastic systems; (differential) game theory; applications of game theory; modeling and simulation of supply chains, manufacturing and service systems; theory and applications of distributed and hybrid simulations, discrete event and system dynamics simulations; applied stochastic models; scheduling and control of railways and other transport operations; time tabling of services, crew and vehicle scheduling for transport operations; optimization and design problems arising from ecommerce, including auctions and mechanism design for electronic exchanges; risk analysis and contract design; revenue management; quantitative models for financial engineering. Theory and applications of neural nets and fuzzy systems in manufacturing and management; development and applications of m o d e r n i n f o r m a t i o n systems for managing manufacturing, supply chain and service organizations. The IEOR programme is unique in its contemporary flavor, with new courses in Financial Engineering, Supply Chain Management, Game Theory, Markov decision process, System Dynamics, Neural Networks and Fuzzy Logic, Services Management, Manufacturing systems to name a few. The programme is equally strong in background building, with updated courses in Optimization Techniques, Stochastic Models, Simulation, and Knowledge-based systems.
Large scale systems, system reduction, nuclear reactor control, sliding mode control (continuous & discrete), power systems stability & control, modeling, control & implementation of smart structures, space launch vehicles stability & control, gas turbines stability & control, flexible manipulators, stability & control of multirate output feedback based control (POF/FOS). Robust stability and control especially using quantitative feedback theory (QFT) techniques, nonlinear system analysis and control and reliable computing using interval analysis techniques. Optimal control, constrained and optimization based control, in particular, stochastic model-predictive/receding-horizon control. Nonlinear and adaptive control, geometric mechanics, Lagrangian and Hamiltgonian mechanics Cooperative control of multi-agent systems, resource allocation, team theory and its application, game theory, decentralized control, cooperative and network control. Reconfigurable hardware, embedded control systems, robotic path planning algorithms, hardware/software codesign. Switched and hybrid systems, control under communication and computation constraints; stochastic control; applications of stochastic process in engineering systems.
First class M.E.
or
M.Tech.
in
BMSC01
Systems and Control Engineering
Aerospace / Chemical / Electrical / Electronics / Instrumentation / Mechanical / Metallurgical Engineering / Systems & Control Engineering. Candidates interested in pursuing a Ph. D. should identify and communicate with atleast a couple of faculty members of the group with whom their research interests match. The names of these faculty members should preferably be mentioned in the application form. This is a pre- requisite for shortlisting
Energy Efficiency / Improvements in conventional

Energy Systems: Heat pumps, Energy integration, Process integration for resource optimization, Pinch AnalysisDevelopment of techniques for optimization of Utility systems, Demand Side Management/ Load Management in the Power Sector, Variable Speed Drives, Power Generation and Systems Planning, Energy Management and Auditing, Efficient Motor Drive Systems, Electronics Ballasts, Static VAR compensators, Illumination control, Power Electronics in Energy Efficient Systems, Electric Vehicles, Boilers and Fluidised Bed Combustion, Exhaust Heat Recovery, Cogeneration, Building Energy Management, Efficient Air Conditioning Systems, Hydrogen Generation and Storage
BMEN01
Department of Energy Science and Engineering
M.Tech. Degree in any of the following branches of engineering: Aeronautical/ Aerospace, Chemical, Civil, Electrical, Mechanical, Metallurgical. M.Tech. in Energy Studies
26
Code
Department
Renewables: Biomass Gasifier Design, Development and Testing, Pyrolysis for liquid fuels and chemical, CNG Kit development, Testing of Solar Collector and systems, Passive Solar Architecture, Development of Carbon PV cell, Decentralised Power SystemsGrid Integration Issues, Hybrid Systems for Rural Electrification, Wind Energy, Low Cost Solar Drier, Fuel Cells, Thin film solar cells, Carbon nano tubes for hydrogen storage, Solar photovoltaic concentrator, Biomass conversation to Gaseous Fuels nd and 2 Generation Biofuels, Development of Engines for SVO, Biodiesel, Dual fuelling etc., Biodiesel manufacturing process. Clean Coal Technologies : Combustion) Co 2 requestrations (UCG, Chemical Looping,
M.Sc. in Chemistry/ Physics/ Mathematics with a good academic record and a minimum of two years of relevant engineering experience in an energy- related field in Energy Studies.
Nuclear : Nuclear Safety, Nuclear W aste management, Thermal Hydraulics Research, Computer Simulation Models for Analysis of Transients in Pressurised Heavy W ater Reactor
Accounting, Economics, Innovation and Entrepreneurship, Financial Management, General Management, Human Resource Management, Information Systems, Intellectual Property Rights, International Business, Management of Information Technology, Marketing Management, Operations Management, Organization Behavior, Project Management, Quality Management, Statistics and Operations Research, Strategy and Business Policy, Technology Management, Organisational Excellence Competiveness
i) B.E./B.Tech. or equivalent with 70% Marks / 7.5 CPI (65% marks/7.0 CPI for SC/ST) and valid score in GATE/ CAT/GMET/UGC-CSIR JRF Examination. OR ii) B.E./B.Tech or equivalent (having at least two years of work experience) with 60% marks/6.5 CPI (55% marks/6.0 CPI for SC/ST) and a valid score in GATE/CAT/GMAT/UGC-CSIR JRF examination. OR iii) M.E./M.Tech./M.Phil or equivalent degree with 60% marks / 6.5 CPI (55% marks / 6.0 CPI for SC/ST) at post-graduation level. OR iv) Master of Management / MBA or equivalent with 60% marks / 6.5 CPI (55% marks / 6.0 CPI for SC/ST) at post-graduation level. OR v)M.Sc/M.A/M.Com/LLM/MCA or equivalent with 60% marks / 6.5 CPI (55% marks /6.0 CPI for SC/ST) at post-graduation level and a valid score in GATE/CAT /GMAT/ UGC-CSIR JRF examination. OR vi)CA / CFA (US) with 60% marks / 6.5 CPI (55% marks / 6.0 CPI for SC/ST) in the preceding degrees and a valid score in GATE/CAT/GMAT/ UGC-CSIR JRF examination.
BMMG01
School of Management
27
Code
Department
Some of the specific areas include: Studies in Objects and Cultural notions Indian product tradition Environments for Learning Information Visualization Perception and Cognition Product Semantics Cognition, Mental Imagery and Design Problem Solving Bionics Materials and Processes Design Strategy and Innovation New Product Development Collaborative Methodology for Innovation Human-Computer Interaction HCI Software Engineering Overlap Interaction Design for Indian Needs Print Media, Illustrations, Multimedia, E-learning, Story Telling in Traditional & Digital Media, Design Management and Design Methods Collaborative Social and Learning Environments Product Interaction Design Innovation Graphic Language and Information Visualization Way-Finding and Navigation Systems Typography and Typefaces Culture and Story Telling Form and Product Aesthetics Repositioning of Bamboo Craft Creativity and Product Innovation Holistic Thinking in Design Automobile, Consumer and Furniture Ergonomics Workstation Ergonomics and Design Musculoskeletal Disorders Manual Material Handling Products for the People with Special Needs
First Class or 55% marks (50% for SC /ST) In M.Des / M.Arch / M.Tech. / M.Phil / MFA / Post-Graduate Diploma in / Design of NID, Ahmedabad and equivalent OR B.Des / B.Arch / B.FA / MA /M.Sc / Under - Graduate Diploma in Design of NID, Ahmedabad or Equivalent degree with related work with a valid CEED Score Candidate with a minimum of three years of relevant professional experience CEED Score can also be considered.
BMID01
Industrial Design Centre
Research Areas I) a) b) c) d) e) Application Area Water Resources Terrain Evaluation, Land-use planning and monitoring Rural Development and Agro-informatics Minerals Exploration Natural Hazard of Droughts, Desertification, Landslide, Avalanche, Earthquake, Tsunami etc. f) Marine Resources and Ecology g) Snow, Glaciers and Atmosphere h) Applications of Microwave Remote Sensing II) Theoretical Areas i) ii) iii) iv) v) vi) vii) Digital Image Processing Digital Photogrammetry and Cartography Geospatial Technologies SAR Interferometry and Polarimetry Mineral Systems Studies Global Positioning Systems Climate Change Studies
BMSR01
Centre of Studies in Resources Engineering
Candidates with First Class or 60% marks (55% marks for SC/ST) in B.Tech / B.E in any branch of Engineering OR M.Sc. in any branch of Science with Mathematics as a subject upto 10+2 level OR M.Tech. / M.E. in any branch of Engineering
28
3.
Indian Institute of Technology Delhi, New Delhi 110016 DL
In all cases, the minimum eligibility is Masters degree in Engineering/Technology or Masters degree in Science / Humanities with a minimum of 60% (6.75 CGPA) marks in aggregate (of all the year / semesters of the qualifying examination) or equivalent grade point average (as determined by IIT Delhi). For SC/ST/PD category candidates, the minimum performance in the qualifying degree is relaxed from 60% to 55% (from 6.75 to 6.25 CGPA).
Code
Department / Centre
(a) Design Engineering: Design Engineering, Design Method and Engineering alternatives, Reliability Engineering. (b) Fluid Mechanics: Bio-fluid mechanics, Computational Aerodynamics, CFD- Computational Fluid Dynamics (includes DNS- Direct Numerical Simulation, LES-Large Eddy Simulation, DES-Detached Eddy Simulation, RANS-Reynolds Averaged Navier-Stokes etc.), Internal Flows-Aircraft engine intake ducts and combustors, Hydrodynamic stability theory, Low-dimensional models and chaos, Micro-air Vehicles, Optical flow diagnostics (PIV-Particle Image Velocimetry and Micro PIV), Pipeline Engineering, Pollution Dispersion, Supersonic and Hypersonic Flows, Turbulence, Turbulent boundary-layer stability and control, Two phase flows. (c) Materials Science: Crystallography, Fracture Mechanics, Metal foams, physical metallurgy, severe plastic deformation, grain growth, phase transformations. (d) Solid Mechanics: Composite structures and materials, Computational methods in solids, Dynamics and Non-linear analysis of structures, off shore structures Experimental stress analysis, Impact mechanics, Functionally graded materials and structures, Smart structures damage mechanics, Fluid Structure Interaction, Buckling / Post buckling of plates and shells, soft material, cell and Tissue Mechanics, Nano Mechanics.
DLAM01
Applied Mechanics
Masters degree in Mechanical, Civil, Chemical, Aeronautical, Metallurgy, Naval Architecture, Applied Mechanics, Engineering Mechanics or Design Engineering.
DLAS01
Centre for Atmospheric Science
Monsoon dynamics, Micro meteorology, General circulation and climate modeling, Meso-scale studies and local weather prediction, Limited area modeling, Air Pollution Studies, Environmental modeling, Air quality models, Impact assessment and Environment risk assessment studies, W ind driven ocean circulation, Ocean circulation, Air-sea interaction, Coastal ocean circulation and upwelling, Estuarian dynamics, Storm Surge prediction, Oceanic fronts and tides.
M.Tech / M.Sc. / B.Tech (with valid GATE Score) degree in Mechanical, Civil, Chemical & Computer Science & Engineering, Physics, Chemistry, Mathematics, Statistics, Oceanography, Environmental Science, Engineering Physics, Atmospheric Science, Meteorology and related fields. For B.Tech or equivalent the minimum eligibility is 70% marks or 7.5 CGPA.
(a) DLAL01 Centre for Applied Research in Electronics
Microelectronics Technology, MEMS, Solid-state devices, Surface acoustic wave techniques, Silicon sensors, ThermoAcousto-Optic Non-destructive Characterization, Magnetic Nano Materials and Biosensors, Organic Electronics.
Masters degree with the preceding degree in appropriate area with First class throughout.
(b) Microwave Circuits, Antennas, RF MEMS, Ultra wide band systems, MMICS, RFID, Device Modeling, W ireless Communication. (c) Signal processing and underwater electronics, Speech and Audio Signal Processing, Communications.
Masters degree with the preceding degree in Electrical, Electronics, or Communication Engineering with First class throughout.
DLBM01
Centre for Biomedical Engineering
Medical Electronics, Biomaterials in medicine, Rehabilitation Engineering, Technology in mass health care, physiological system analysis and modeling, Biomechanics, Polymers used in medicine and surgery, Drug delivery systems, Biosensors, Bio-imaging, Vascular Research Reproductive Bio-engineering Telemedicine, Biomechanics, Medical Devices Simulation.
Masters degree in any branch of Engineering /Science/ Pharmacology/ M.B.B.S. with 60% MD /MS with first class and B.Tech or equivalent having above 70% are also eligible to apply.
29
Code
Department / Centre
Bioprocess Engineering: Engineering analysis of enzymatic, cellular, metabolic processing involving bioprocess kinetics, Modeling and design of bioreactors, Monitoring and control of process parameters, Operational strategies and process integration, Animal cell Technology, Plant Cell Technology, Metabolic flux analysis, Bioenergetics, Biotransformation. Downstream Processing: Novel product separation strategies based on sorption, Liquid-liquid extraction, Ultra-filtration, Affinity methods. Molecular Biology and Recombinant DNA Technology: Development of recombinant cultures for hyper production of metabolites and commercially important enzymes ( glycosidase, laccase, protease) Protein Engineering, Heterologous protein production (including therapeutics) in Escherichia coli, Pichia pastoris . Bioremediation and Environmental Biotechnology: Micro RNA analysis. Bioinformatics and Molecular modeling. Electric Power Systems, Energy Planning, Fuel Technology, Fuel Cells, Biomass Utilization, Utilization of alternative fuels in IC engines, Sol ar Thermal Utilization, Ph ot ovolt aic , Plas ma Science & Technology, Energy Conservation, Energy a n d Environment Management. General Management, Economic Development, Indian Financial System, International Business, Competitiveness, Corporate Planning, Corporate Governance, Organization Management and Development, Organizational Behavior, Human Resources Management, Organizational Culture, Leadership and Business Ethics, Financial Management, Corporate Finance, Portfolio Management, Security Analysis, Management of Investment, International Finance, Production and Operations Management, Optimization Techniques, Facility Layout/Location Problems, Manufacturing Systems, Project Management, Risk Management, infrastructure Projects, Mergers and Acquisitions, Productivity and Efficiency Analysis, Marketing Management, Sales Management, Strategic Marketing Management, IPR Management, Longitudinal and Lateral Thinking, Information Systems & Technology, E- Business, EGovernance, Telecom Systems Management, International Telecom Management, Flexible Systems Management, Management of Change, Entrepreneurship Management & Development, Creativity and Innovation Management, R&D Management, Managerial Ethics, Environment Management, Management of Technology.
DLBC01
Biochemical Engineering & Biotechnology
M.Tech/ M.S. degree in Chemical / Biochemical Engineering, Biotechnology, Food Technology.
DLEN01
Centre for Energy Studies
Masters degree in Mechanical, Civil, Agriculture, Chemical, Electrical/ Electronics, Energy, Environment, Instrumentation & Control Engineering, Physics, Chemistry and Automobile Engineering.
DLMG01
Management Studies
Masters degree in any branch of Engineering/Technology, or Masters degree in Science, Commerce, Economics, Social Science with MBA, or Graduate in any branch of Engineering/ Technology with MBA or equivalent with CGPA 6.75 on a 10 point scale or 60% in aggregate for general category.
DLPS01
Centre for Polymer Science & Engineering
Polymer Science and Technology
M.Tech in Polymer Science & Engineering or Plastic & R u bb er Technology or Chemical Engineering, Chemical Technology or Fiber Science & Technology or M.Sc. in Chemistry or Physics.
DLRD01
Rural Development & Technology
Artisanal technologies and rural industries, Biogas Production and enrichment and animal power, Dairy and food processing, Renewable energy technologies, Clean Cookstoves, Rural energy systems, Biomass and Environment, Microbial Biotechnology, Ecological Sanitation. Traditional Knowledge, Bamboo based housing, Bioremediation, Waste Management, Biofertilizers and Biopesticides, Tissue culture, Mushroom technology, Algal Biofuels, Food Quality & Safety.
Masters degree in any discipline of Engineering /Technology or Science.
DLCH01
Chemical Engineering
Reaction Engineering, Thermodynamics, Process Dynamics and Control, Projects related to energy, Environmental Engineering, Computer Aided Design, Separation Processes, Fluid Particle Mechanics, Modeling and Simulation, Biomass Conversion, Petroleum Technology, Nano-technology, Thin films, Fuel Cells, Interfacial Engineering, Bioseparation, Biotechnology, fluid Mechanics, Polymers, Scheduling, Optimization, Heat Integration, Molecular simulations.
Masters degree Engineering.
in
Chemical
30
Code
Department / Centre
Chemistry
Physical Chemistry, Organic Chemistry, Inorganic Chemistry, Biochemistry, Analytical Chemistry, Theoretical Chemistry, Materials Chemistry
Masters degree in Chemistry with at least 60% marks or CGPA of 6.75 on a ten point scale. Masters degree in Civil Engineering or MBEM, SPA or equivalent. Masters degree in Civil Engineering or in Applied Geology. Masters degree in Civil or in Environmental Science or Chemical Engineering or Biochemical & Biotechnology. Masters degree in Civil Engineering Masters degree in Civil or Mining Engineering or in Applied Geology Masters degree in Civil Engineering Masters degree in Civil Engineering Masters degree in Civil, Agricultural, or Mining Engineering Masters degree in Civil Transport Engineering/ Transport Planning/ Urban Planning. Masters degree in civil or Agricultural Engineering.
DLCY01
DLCE01
Construction Engineering and Management
DLCE02
Engineering Geology
DLCE03 Civil Engineering (code number of the specialization to be indicated in the data sheet)
Environmental Engineering
DLCE04 DLCE05 DLCE06 DLCE07
Offshore Structures. Rock Engineering.
Geotechnical and Geoenvironmental Engineering Structural Engineering Remote sensing
DLCE08
DLCE09
Transportation Engineering
DLCE10
W ater Resources Engineering
DLCS01
Computer Architecture, Design Automation and VLSI, HW -SW Co-design, Embedded Systems Design, P ar all el Pr oc es s ing, Image Processing, Artificial Intelligence, Location Based Services, Computer Vision, Computer Graphics and Animation, Semantics of Programming Languages, M ac h i n e l e ar n i n g , Databases, Information Retrieval, Data Mining, Social Network Analysis, Computer Networks, W ireless Networks, Systems and Network Security, Design and Analysis of Algorithms, Optimization, Computational Geometry, Computational and Systems Biology, Computational Logic, Operating Systems, IT for Development, Mobile Computation, Verification, Concurrency, Complier Design, Virtualization and Cloud Computing.
Masters degree in Computer Science, Electronics Engineering, Mathematics or Physics with formal background in Computer Science or MCA. Excellent academic record i.e. 72.5% or 8.0 CGPA in qualifying degree.
DLEE01
Computer Architecture, Parallel Processing, Multimedia, Computer and Communication Networks, Communications, Signal Processing, Image processing, Computer Vision, Pattern Recognition, Machine Learning, Biometrics, Bioinformatics Optical Communications, Control Systems, Intelligent Control, Nonlinear Control, Robotics, Systems Theory, VLSI, Neural Networks, Electrical Machines and Drives, Power Electronics, Power Systems, Power quality generation, Distributed generation & Power generation from renewable sources.
Masters degree in an appropriate discipline wi t h excellent academic record.
31
Code
Department / Centre
Development Economics, Macroeconomics, Microeconomics, Sociology of Culture and Knowledge, Sociology of Development Environmental Sociology. Sociology of Social movements, Golobalization and Transnationalism, Sociology of Religion, Sociology of Agriculture Technology and Rural Development policy, Sociology of Information and Communication Technologies (ICTS) for Development. Visual Anthropology / Sociology, Economic Sociology, Technology, Work and Society, Gender Studies, Cultural Studies, Performance Studies, New Media Studies, Science and Technology policy, Energy and Environmental policy, Modemist and Postmodemist Literature, Indian English Theatre, Indian Writing in English Contemporary Fiction, Postcolonial Literature, (Formal Syntax and Semantics, Language Acquisition), Cognitive Studies, Philosophy of Language, Epistemology, Metaphysics, Ethics, Aesthetics, Continental Philosophy of Language, Epistemology, Philosophy of Science, Philosophy and Film, Philosophy of Mind and Cognition, Wittgenstein; Metaphysics of the Self , Religion and Development, Buddhism (including Buddhism in the Himalayas and Political Buddhism), Philosophy of Culture and History, Social and Political Philosophy. CAD and Simulation of Electronic Systems, Microprocessor Applications, Power Electronics and Control, Electric Drives, Electromagnetic Sensors and Instrumentation, Smart Sensors and Sensors Networks, Digital System Design and DSP Applications, Digital Holography, Digital Speckle Pattern Interferometry, Flame Tomography, Fiber-Optic Sensors, Optical Coherence Tomography and Profilometry, Optical Tweezers and Their Applications, Optics of LEDs and OLEDs Optical Metrology, Diffractive Optics, Aspheric and Free form Optics and their Applications, Solid Mechanics, Stress-Strain Analysis, Mechanical Properties of polymers, Nano-Composite, Fiber re-enforced plastic composites, Design Methodology and Management, Computer Aided Product Design, Ergonomics, Graphic Design, Passive Solar Architecture, Environment Design, Human Computer Interface, Disaster Management, Designs and Emotions, Design and Culture, Design for user Experience, Effective Interface Design, Design for Customer persuasion and e-commerce, Soft computing applications in product design, Sustainable product design, transportation Design for sustainability, Design Innovation. Tribology: Tribology of materials & machine components, W ear Mechanisms and wear modeling, Surface Engineering, Boundary & Hydrodynamic lubrication, EHD lubrication, Lubricant characterization & analysis, Pneumatic conveying of bulk materials, Operational problems like erosion & degradation, etc. Maintenance Engineering and Machine Dynamics: Condition based maintenance, vibration, acoustic emission, temperature and wear debris monitoring techniques, maintenance planning and control, computer aided maintenance, Maintenance audit, Reliability, Availability and Maintainability (RAM) engineering, Vibration & noise analysis and control, Risk analysis and safety, Non-destructive testing, Failure analysis & residual life estimation, Performance and Dynamic studies of machine elements and equipment like pumps, compressors, turbines, etc, Design for maintenance, etc.
DLHS01
Humanities and Social Sciences
MA with 1 subject.
st
class in the relevant
DLID01
Instrument Design and Development Centre
Masters / Bachelors degree in Electrical, Electronics, Mechanical, Applied Optics, Instrumentation, Opto-electronics, Design Engineering, Physics, OR M.Des. degree. For B.Tech or equivalent the minimum eligibility is 70% marks or 7.5 CGPA.
DLTR01
Industrial Tribology, Machine Dynamics & Maintenance Engineering
Masters Degree in Engineering (Mechanical, Chemical, Industrial).
DLMA01
Mathematics
Pure Mathematics, Applied Mathematics, Statistics, Operational Research, Theoretical Computer Science.
Masters Degree in Mathematics, Statistics, or Operational Research Computer Science, MCA, B.Tech Computer Science, M.Tech Computer Applications / M.Tech Computer Science. For B.Tech equivalent the minimum eligibility 70% marks or 7.5 CGPA.
st
or in in in or is
1 Class in B.Sc and M.Sc (or 6.75 CGPA in 10 point scale)
32
Code
Department / Centre
Masters Degree in Mathematics, Statistics, or Operational Research Computer Science, MCA, B.Tech Computer Science, M.Tech Computer Applications / M.Tech Computer Science. For B.Tech equivalent the minimum eligibility 70% marks or 7.5 CGPA.
st
DLMA01
Mathematics
Pure Mathematics, Applied Mathematics, Statistics, Operational Research, Theoretical Computer Science.
or in in in or is
1 Class in B.Sc and M.Sc (or 6.75 CGPA in 10 point scale) Masters Degree in Mechanical Engineering / Relevant engineering discipline to be approved by the department. Masters Degree in any Engineering discipline / any relevant nonengineering discipline i.g. MBA, MCA etc.
Design, Production, Thermal Engineering Mechanical Engineering Industrial Engineering
DLME01
Condensed Matter Physics: Experimental & Theoretical Solid State Physics: Thin Films, Materials and Devices, Nanomaterials, Graphene and Topological Insulators, Lattice Dynamics, Semiconductors and Amorphous Materials, Electronics Ceramics, Microwave Materials, Quantum Functional Materials, Spintronic and Nanomagnetism, Superconductivity, Novel Magnetic Multifunctional Materials including Multiferroics and Magnetic Shape Memory Alloys, Photovoltaics, Laser Spectroscopy and Applications; Laser Processing, Quantum Many Body Physics with ultra cold atoms DLPH01 Physics Optics and Photonics: Holography, High Density data storage, liquid crystals, Nonlinear Phase Conjugation, Optical Information Processing, Optical data security, Nonlinear Optics, Nonlinear guided wave optics, Quantum Optics, Atom-Photon system, Fiber optics, Integrated Optics, Fiber Optics Sensors, Fiber optics components, Nanophotonics, Singular optics, Optical design. Plasma Physics: Particle acceleration, Nonlinear waves and instabilities in plasma, Thermo Nuclear Fusion; Microwaves and Plasma Interaction, Solitons in Plasma, Space Plasmas. Theoretical Physics: Mathematical Physics, Statistical Mechanics and Computational Physics; Nuclear and particle physics
M.Sc. Physics / B.tech. Engineering Physics / M.Tech. in Applied Optics or Soiled State Materials.
DLTX01
Textile Technology
Mechanical Processing of Textiles, Textile Chemical Processing, Fiber Science and Technology, Technical Textiles, Textile Machine Design.
M.Tech or Equivalent degree in Textile Technology, Textile Chemistry, Fiber Science and Technology, Textile Engineering, Chemical or Mechanical Engineering, Polymer Science and Technology, Plastic and Rubber Technology, M.Sc. in Physics and Chemistry.
33
4.
Indian Institute of Technology Guwahati, Guwahati 781039 GW
Relaxation of SC/ST/PD candidates: Eligibility criteria will be relaxed by 5% in percent marks or 0.5 point in CPI in all cases.
Code
Department/ Centre
M.Tech. degree or equivalent in an appropriate area with minimum CPI of 6.5 or 60% marks or MSc Degree in Bio Technology/ Life Science/ Agricultural Sciences/ Chemistry with minimum CPI 7.5/10 or 70% marks. M.Tech. degree or equivalent in an appropriate area with minimum CPI of 6.5 or 60% marks.
GWBT01
Biotechnology
All areas of Biotechnology
GWCH01
All areas of Chemical Engineering
GW CY01
Chemistry
Inorganic Chemistry, Organic Chemistry Physical Chemistry & Theoretical Chemistry.
Masters degree in the relevant discipline with minimum of CPI 6.5/10 of 60% marks. M.Tech. degree or equivalent in an appropriate area with minimum CPI of 6.5 or 60% marks.
GW CE01
Civil Engineering
Construction Management, Environmental Engineering, Geotechnical Engineering, Structural Engineering; Transportation Engineering and Water Resources Engineering. Algorithms; Computational Geometry; Systems Biology (Biocomputing); Bio-inspired Robotics and related algorithms; Mobile Agent Based Systems; Machine Learning; Speech Processing; Image Processing, Information Retrieval and Web Mining; Formal Verification; Embedded Systems, CAD for VLSI; Multi-processor Computer Architecture; Computer Security; Networks; Operating Systems; Distributed Systems; and Human-Computer Interactions.
GW CS01
Computer Science & Engineering
M.Tech. degree or equivalent in an appropriate area with minimum CPI of 6.5 or 60% marks.
GW DE01
Design
Product Design; Ergonomics; Usability Engineering including Human Computer Interaction (HCI); Design Pedagogy; Design Management; Design Theory; Form and Perception Studies; and Design and Visual Culture
M.Des/M.Arch or M.Tech/ME degree in relevant area with a minimum CPI 6.5/10 or 60% marks. Masters degree in Applied Arts / Ergonomics / Fine Arts/Psychology/Physiology with minimum CPI 6.5/10 or 60% may also be considered. M.Tech. degree or equivalent in an appropriate area with minimum CPI of 6.5/10 or 60%marks. M.Tech. degree or equivalent in an appropriate area with minimum CPI of 6.5/10 or 60% marks, OR M.Sc. in Physics, Chemistry, Biotechnology, Environmental Science or in relevant field with minimum of CPI 6.5/10 of 60% marks. M.Tech. degree or equivalent in an appropriate area with minimum CPI of 6.5/10 or 60% marks, OR, M.Sc. in Physics, Chemistry Biotechnology, Environmental Science or in relevant field with minimum CPI of 6.5/10 or 60% marks.
GWEE01
Electronics & Communication Engineering
All areas of Electrical, Electronics and Communication Engineering
GWEN01
Energy
Screening and Genetic improvement of Bio-fuel crops, biodiesel from microalgae, bio-fuel cell, solar cells; photovoltaic materials and devices, biogas based power generation, combustion and detonation, energy efficiency in electric machine, wind energy, waste heat recovery.
GWEV01
Centre for Environment
Environmental Chemistry/Biotechnology/Economics/Engineering; Waste Water Treatment and Supply, CO2 Capture/storage; Environmental; Environmental; Atmospheric Chemistry; Air Quality monitoring; Environmental Hydraulics; Environmental Genomics; and Other emerging areas of environment with interdisciplinary application of science, technology, arts and humanities.
34
Code
Department/ Centre
Masters Degree in the discipline with a minimum marks or equivalent. relevant of 55%
GW HS01
Economics, History, Linguistics and Psychology.
GW MA01
Mathematics
Algebra, Algebraic Geometry, Algebraic Number Theory, Graph Theory, Combinatorial Matrix Theory, Analysis, Numerical Analysis, Fluid Dynamics, Probability and Statistics, Applied Stochastic Processes, Formal Languages and Automata Theory
Masters degree in the relevant discipline with a first class or a minimum CPI 6.5/10 or 60% marks.
GW ME01
Stress Analysis; Experimental and Computational Fracture Mechanics; Composite Materials and Structures; Smart Materials and Smart Structures; Materials Characterization; Dynamics and Controls; Electro-Mechanical Systems; Robotics; Nonlinear Vibration; Bio-Mechanics; Noise; Tribology; Condition Monitoring; Experimental Fluid Dynamics; Computational Fluid Dynamics (CFD); Bio-MEMS and Micro Fluidics, Heat Transfer; Low Speed and High Speed Acrodynamics; Multiphase Flow; Hydrogen Energy; Metal Hydride Based TGhermal Machines; Energy Storage and Fluidization; Bio-fuels; Metal Cutting; Micro Machining and Micro Fabrication; Unconventional Machining; Mechatronics; CAD/CAM/CAE; Materials Processing and Heat Treatment; Metal Forming; Welding; Bio-Nano Composites and Nanofluids.
M.Tech. degree or equivalent in an appropriate area with minimum CPI of 6.5 or 60% marks.
GWPH01
Physics
Condensed Matter Physics biomaterials, cold atoms and quantum computation, computational materials physics, ferroelectric materials, organic semiconductors, semiconducting materials, smart magnetic materials, soft condensed matter physics, spintronics, statistical physics, strongly correlated systems, superconductivity topological insulators. Laser and Photonics Applied Optics, Fiber Optics, Laser Matter Interaction, Nonlinear Optics, Quantum Optics. High Energy Physics Collider Phenomenology, beyond the standard model and cosmological connections, B-Physics, CP violation, Neutrino physics. Astrophysics Astrophysical flows, ultra high energy cosmic rays
Masters degree in the relevant discipline with a first class or a minimum CPI 6.5/10 or 60% marks.
35
5.
Indian Institute of Technology Kanpur, Kanpur 208016 KN
The basic qualification for admission to the Ph. D. programme is Masters degree in Engineering, Science, Humanities and Social Sciences respectively or allied area(s). However, the applicants with Bachelors degree in Engineering may also be considered for admission based on their performance and attainments.
Code
Department
Aerodynamics: Boundary Layers, Transition, Turbulence, Wind Tunnel Testing, Unsteady Aerodynamics, Aerodynamic Noise, Computational Aerodynamics, Fluid Dynamics, High Speed Jets, Rarefied Gas Flows, Real Gas Effects, W ind Energy. Flight Mechanics: Stability and Control, Aeroservoelasticity, Active Controls, Optimal Control, Aircraft Systems, Spacecraft Trajectory and Attitude Dynamics and Control, Hypersonic Flight Mechanics. Propulsion: Jet Propulsion, Gas Turbines, Engine Control, Burning Mechanisms of Propellants, Flame Holders. Structures: Aeroelasticity, Helicopter dynamics, High temperature problems in solid mechanics, Composites, Structural stability, Structural dynamics, Structural optimization, Stochastic problems, Random vibrations, Control of flexible structures, Smart materials and structures. Transport phenomena, Chemical Reaction Engineering, Applied Kinetics and Catalysis, Thermodynamics, Membrane Separation Processes, Process Systems Development, Computer Aided Design, Optimization and Control, Petroleum Engineering, Pulp and Paper Tech., Polymer Science and Engineering, Environmental Pollution and Control, Adsorption, Safety and Reliability, Dynamics of Nonlinear Systems, Zeolite Catalysis, Colloids and Interface Engineering CFD, Rheology, Non-Newtonian Fluid Mechanics, Nanotechnology, Numerical Methods for Engineers, Mathematical Methods in Chemical Engineering, Modeling and Simulation in Chemical Engineering, Bioinformatics, Modeling and Simulation of Separation Processes. Inorganic: Bio-inorganic, Coordination, Fullerene chemistry, N-P-Si chemistry, Polymers and organo-metallic. Organic: Bio-organic, Medicinal, Organic photo-chemistry, Organic synthesis and reaction mechanism, Organometallic. Physical: Bio-physical, Chemical kinetics, Magnetic resonance, Mass spectrometry, Physical photochemistry, Plasma chemistry, Solid state chemistry, Molecular spectroscopy. Theoretical: Molecular dynamics, Quantum chemistry, Statistical mechanics of liquids.
KNAE01
Masters degree in: (1) Engineering (Aeronautical, Aerospace, Mechanical, Civil, Chemical, Naval Architecture Electronics). OR (2) Science with a minimum of 3 years of relevant R&D experience in Aerospace Engineering.
First class Masters degree Chemical Engineering or equivalent.
in
KNCH01
KNCY01
Chemistry
High second class Masters degree in Chemistry or Physics; Note: Candidates must have had Bachelors degree with Chemistry and preferably Mathematics as one of the subjects.
KNCE01
Engineering Geosciences
a) For Engineering Geosciences, M.Tech./M.E. in Civil Engineering,/ M.Tech. or M.Sc. degree in Earth Science streams. b) For Environmental Engineering, a Masters degree in Civil/ Environmental/ Chemical / Mechanical/ Metallurgical Engineering Or related engineering branch. c) For Geoinformatics, M.Tech./ M.E. in Civil/ Mining/ Electrical/ Computer Science Engineering./ Information Technology or M.Tech/ MSc. Degree in Earth Science streams/ Geography /Physics/ Mathematics/ Environmental Sciences d) For Geotechnical Engineering B .Tech./ B.E. and M.Tech./ M.E. degree in Civil Engineering. g) For Hydraulics and W ater Resources Engineering M.Tech./ M.E. degree in Civil/ Aerospace/ Agricultural Engineering. f) For Structural Engineering: M.Tech./ M.E. degree in Engineering Some candidates with Masters degree in Architecture, Building Construction and allied subjects may also be considered.
KNCE02 Civil Engineering (Code no. of the specialization to be indicated in the data sheet)
Environmental Engineering.
KNCE03
Geoinformatics
KNCE04
Geotechnical Engineering
KNCE05
Hydraulics & W ater Resources Engineering
KNCE06
Structural Engineering
36
Code
Department
g)
For Transportation Engineering., M.Teh./ M.E. degree in Civil Engineering In addition to theabove, candidates with B.Tech./ B.E. degree in Engineering with a minimum overall 75 percent marks/ 7.5 CPI and a valid GATE score or Masters degree in science or an allied area with exceptional academic records may also be considered for admission directly into the Ph.D. programme.
KNCE07
Civil Engineering (Code no. of the specialization to be indicated in the data sheet)
Transportation System Engineering
Theory: Complexity Theory, Complexity of Number theoretic and Algebraic Computations, Logic, Quantum Computing Algorithms: Deterministic, Parallel, and Approximation in Graphs, Computational Biology, Data Streams, Geometry, Vision, Biometrics. Artificial Intelligence: Machine Learning, Language Acquisition, Natural Language Translation, Knowledge Management. KNCS01 Computer Science & Engineering Software Technology: Software Architecture Security: Operating Systems, Network, Infrastructure, Protocol Design. Compilers: Compilers for High Performance Architecture Networks: Internet Technology, Grid Computing, Mobile Computing. Architecture: VLSI: Design including floor-planning and routing, Testing, Fault Tolerance, Embedded systems (tools and design) Smart-Card,
First class Masters degree in Engineering Must possess adequate Computer Science background. (Note: Outstanding candidates)
KNEE01
Microelectronics, VLSI and Display Technologies, Power and Control, RF Engineering and Photonics, Signal Processing, Communications and Networks. Economics Industrial Organization and Policy, Environmental Economics, Environmental Impact Assessment, Development Economics & Policy, Microeconomics, Inter-Industry Economics, Project Evaluation/BCA, Regional Economics, Macroeconomic Theory & Policy, Monetary Economics, Managerial Economics, Transport Economics, Law and Economics, Heath Economics. English Literature: American Literature, British Literature, Common wealth Literature, Ethnic Literatures, European Literature, Indian Writing in English, Literary Movements, Literary Theory, Teaching of Literature. Linguistics: Linguistic Theory, Cognitive Linguistics, Computational Linguistics, Communication studies, Sociolinguistics, Applied Linguistics and English Language Teaching.
Masters degree in Electrical, Electronics or Communication Engineering Or equivalent.
55% marks in Masters degree in the respective area with consistently good academic record.
KNHS01
Philosophy: Twentieth Century Philosophy, Logic, Ethics, Philosophy of Language, Philosophy of Social Sciences, Indian Philosophy, Philosophy of Mind, Philosophy of Cognitive Sciences, Philosophical Aesthetics, Philosophy of Religion Ethics. Psychology: Social Cognition, Personality, Experimental Social Psychology, Organizational Behavior, Human Cognitive Processes, Consumer Psychology, Cross-cultural Psychology, Health Psychology and Neuropsychology, Cultural Issues in Psychology, Disaster Mental Health. Sociology: Sociology of Religion, Urban Sociology, Social Demography, Environmental Sociology, Sociology of Development, Science, Technology and Society, Social Movements, Third Sector Non-government and Voluntary development Organization, Human Rights, Social Gerontology, Sociology of Education and Disability Studies.
37
Code
Department
The applicant must have a masters degree in management or relevant disciplines in engineering/ technology with marks/CPI not below the specified minimum. Applicants with a Bachelors degree in engineering with a minimum of 75 percent marks/ 7.5 CPI, or masters degree in science/ arts/ commerce, satisfying each of the following criteria may also be considered. (a) a minimum of 65 percent marks/ 6.5 CPI in the masters degree,
KNIM01
Industrial and Management Engineering
Economics, Infrastructure & Public Systems, Finance & Control Systems, Information & Knowledge Systems, Management of Innovation and Entrepreneurship, Marketing, Operation Management, Operations Research and Quant. Methods, Organization and HRD Strategy and Policy.
KNMA01
Mathematics/ Statistics
Algebraic coding theory, Biomathematics, Biomechanics, complex analysis, Fractals and Complex Dynamics, Differential and integral equations, Fluid mechanics, Functional analysis. Harmonic analysis, Nonlinear analysis, Numerical analysis, Stability theory, Tribology, Mathematical Modeling, Computational Fluid Dynamics, Non Linear Control Systems, Algebra, Multivariate analysis, Order statistics, Nonlinear regression, Signal processing, Ranking and selection procedures, Data analysis, Estimation theory, Decision theory, Time Series, Reliability, Optimisation and variational analysis, Logic, Parallel Computing, wavelets. Reliability Theory, Rough Set Theory, Differential Geometry, Fouvier Analysis, Econometrics
(b) (c)
first division in bachelors degree, and
JRF/95 percentile or higher in GATE High second class Masters degree in Mathematics or Statistics, with at least 55% marks or equivalent.
Solid Mechanics: Composite Materials, Fracture Mechanics, Multiscale simulation, Stress W aves, Non-Destructive Testing, Large Deformation Elasto-Plastic Analysis, Impact Contact Problems, Smart Structures-Materials and System, Microelectro-Mechanical Systems. Computer Aided Design, Kinematics and Dynamics of Machinery, Vibration, Friction and W ear, Lubrication, Rapid Prototyping, Rapid Tooling, Reverse Engineering, Compliant Mechanisms, granular media, crystal physics, noise & acoustics Fluid Mechanics: Active flow control, Turbulence Measurements, W ake Dynamics, Laser-based Techniques Computational Fluid Dynamics, Computerized Tomography, Transport in Hierarchical Porous Media, Holographic PIV. Thermal Sciences: Computational Heat Transfer, Heat Pipes, drop- wise Condensation, Gas Turbine Blade Cooling, Heat Exchangers, Turbomachinery, Emission from IC Engines, Biofuels, Hydrogen Technology and Fuel Cells. Manufacturing Sciences: Metal Cutting, Metal Forming, Machine Tools, Unconventional Machining, C omputer Aided Manufacturing, Computer Integrated Manufacturing System, Netshape Manufacturing. Control Systems: Hydraulic Control, Optimal Control, Non-linear System Analysis. Mechatronics: Manipulators Dynamics, Task Structuring and Path Planning, Collision Avoidance and Navigation, Sensor Based Intelligent Robotics, Industrial Robotics.
First class or equivalent Masters Degree in Mechanical Engineering/ Masters degree in Production Engineering Is admissible for Manufacturing Science. Note: In exceptional cases applicants with first class Masters degree in other branches of Engg. May also be considered.
KNME01
KNMS01
Materials Science (Interdisciplinary programme)
Electronic, Magnetic, Opto-electronic, Piezoelectric, FerroElectric Organic Semiconductor and Energy Storage/ Conversion Materials. Ceramic Processing, Structural Ceramics and Composites. Nanoscale Materials and Processes, Thin Films, Electron Microscopy, Display materials. Superionic/Fast-ion conductors, Solid electrolytes, High Density and Ni-Metal Hydride Batteries. Polymer processing and Rheology, High Performance Plastics, Polymer Blends-alloys & Composites. Optical Spectroscopy (Raman, IR, Photo luminescence), multiferroics.
M.E., M.Tech., M.Sc. (Engineering) Degree in Materials Science or any equivalent branch of engineering/ technology; or B.E., B.Tech., B.Sc. (Engineering) with a minimum of 75% marks or Cumulative Point Index (CPI) of 7.5/10 in any relevant branch of Engineering/ technology, or M.Sc. degree in an allied area with , Exceptional academic records.
38
Code
Department
Modeling & simulation of mineral processing systems, Fluid Flow, Heat and Mass Transfer in Metallurgical Systems, Process design and Development in Extractive Metallurgy, Simulation of Metallurgical Processes, Steel Making, Injection metallurgy, Process control and process optimization in iron and steel-making, Applications of Artificial Intelligence Methods in Metallurgical Processes, Electrometallurgy, Electrochemical cleaning of soil, Aluminum electrolysis, Electrode position, Physical Metallurgy ,Alloy Development, Thermodynamics and Kinetics of phase Transformations, Heat Treatment, Solidification of Metals and Alloys, Interfacial Processes, Mechanical Processing, Thermo mechanical Processing of Steels and Titanium Alloys, Processing-Structure- Property Relations in Materials, Intermetallics, Nano structural Materials, Microstructural characterization and Stereology, Electron microscopy, Evolution and characterization of textures during processing, Environmental Degradation of Materials, Materials- hydrogen interaction, Processing of powders and particles, Discrete Element Method (DEM), Powder Metallurgical Processing, Modeling of P/M Processes, Solid State and Liquid Phase sintering, Structural Ceramics Composite materials, Metal Matrix Composites, Tribology of Advanced Materials, W elding Processes, Magnetic Materials, Electromagnetic materials and Processing, Thin Film Technology, Characterization and Applications of Opto-Electronic Materials and Devices, Materials Processing by Solid State Chemistry, Ferroelectric Ceramics, Electronic materials, W hite Light Illumination, Display Materials and Technologies, Biomaterials. Nonlinear Dynamics and Control, Bifurcation Theory, Transport and Kinetic Theory, Fusion Plasma Simulation, Reactor Safety, Numerical Methods, Radiation Measurements and Nuclear Instrumentation, Reactor Analysis and Design, Radioisotope Applications, W aste Disposal, Non Invasive Imaging, NDT, Computed Tomography.
B.Tech./ M.Tech. degree Metallurgical Engineering Or in Materials Sciences.
in
KNMT01
Materials and Metallurgical Engineering
KNNE01
Nuclear Engineering & Technology
First class Masters degree in any branch of Engg., preferably with some knowledge in Nuclear Engineering or equivalent.
High Energy Physics: Field Theory, Phenomenology, String Theory, Gravitation Cosmology. Ion Beams & Nuclear Techniques: Low Energy Accelerator Based Nuclear and Materials Research. Mossbauer & Positron Spectroscopies for Materials Research. Statistical Mechanics and Condensed Matter (Theory & Expt.): Strongly Correlated Systems, High temperature Superconductivity, Electronic Structure, Disordered Systems, Nanostructures, Porous Silicon, Molecular Dynamics, MonteCarlo Simulations, Non-Equilibrium Statistical Mechanics, Driven Lattice Dissipative Systems and Applications, Soft and Bio Materials, Nonlinear Dynamics, Condensed Matter Experiments, Amorphous Semiconductor, Fast Ion Conductors Magnetism, Superconductivity, Low Temperature Physics, Thin Films, Bio-physics, Superionic Conductors, Inorganic and Organic Semiconductors, Scanning Tunneling Microscopy, Nanomaterials, Carbon based Nanostructures. Lasers & Optics: Lasers and Laser Spectroscopy, Quantum optics, Laser Applications in Medical Physics First class Masters degree in Physics or first class Masters degree in a related subject or first class Bachelors degree in Engg.
KNPH01
Physics
39
5. Indian Institute of Technology Kharagpur, 721 302 KH

In all cases the minimum qualification for admission is a Master's degree in Engineering/Technology or its equivalent with minimum 60% marks or Masters degree in Sciences, Humanities or Social Sciences with minimum of 55 % marks (or equivalent grade point average).
Code
Department
Fluid dynamics and Aerodynamics, Computational fluid dynamics, Experimental methods, Aircraft structures, Compos ite structures and Smart structures, Structural dynamics and aeroelasticity, Aircraft propulsion, Thermal sciences and Engineering, Combustion, Flight mechanics and control. Farm machinery and power: Ergonomics, Biofuels, Soil dynamics in tillage and traction. Land and Water Resources Engineering: Watershed Modeling and Management, Irrigation Systems Management; Groundwater Modeling; Rainwater Harvesting, Flood Modeling, Non-point Source Pollution, Climate Change, Green House Technology. Food Process Engineering: Dairy and Food Engineering, Food Processing and Preservation; Food Science and Technology, Mechanized Processing of Food, Physical and Thermal Properties of Food; Preservation and Packing of Fruits and Vegetables. Agricultural Biotechnology: Microbial and Enzyme Technology; Plant Tissue Culture, Algal Biotechnology, Biotechnology of Medicinal and Aromatic Plants. Agronomy: Climate Change Impact Assessment on Crop Yields, Organic Farming, Tea Cultivation and Processing. Soil Science: Water and Nutrient Management, Plant Nutrition, Soil Physics. Aquacultural Engineering: W aste Utilization and Agro Environmental Technology, Aerators, Cage Aquaculture, Fish Processing Technology, Biofloc Technology. Universal Design, Building Automation and Management Systems, Building Materials and Composites, Urban design, City Planning, Computer Applications in Architecture and Planning, Disaster Responsive design and planning, Green Architecture, Energy Efficient and Cost-effective Building Technology, GIS and Remote Sensing, Heritage studies and Conservation, Housing and Community Planning, Infrastructure Planning and Systems Management, Metropolitan Planning, Recreation and Tourism Planning, Regional Planning, Spatio-environmental Planning and Design, Transportation Planning and Traffic Engineering, Urban Development Management, Urban Open Space, W ater Sensitive Planning. Minimum Qualification Minimum 60% of marks (or equivalent Grade point average) is required in case of M.Sc./M.Tech. degree.
KHAE01
KHAG01
Agricultural and Food Engineering
KHAR01
Architecture and Regional Planning
KHBT01
Biotechnology
Bioinformatics, Tissue Engineering, Bioreactor /bioprocess development, Enzyme Technology, Plant biotechnology, Down stream processing, Genetics, Environmental biotechnology, Cell/molecular biology, Biochemistry, r-DNA Technology, Structural Biology.
KHET01
Center for Educational Technology
Image Processing, Speech Processing, Data Communication, E-learning, Instructional Design, Distance Education, Evaluation and Assessment. Transport Operations, Membranes and other Separation Processes, Reaction Engineering, Particulate Technology, Process Dynamics & Control, Fuel and Mineral Processing, Petroleum Refining & Petrochemicals, Industrial Pollution Control, Modeling & Simulation of Chemical Processes, Green Process Technology, Micro-Scale Heat Exchange & other processes, Advanced Materials Engineering using Plasma, Polymer Engineering etc. DNA Interacting Molecules, Enzyme Inhibitors, Bio-mimetic, Bio-Inorganic Chemistry, Protein Chemistry, Synthetic Organic Chemistry, Surface Chemistry & Catalysis, Nano Crystalline semi conducting magnetic metal chalcogenides and magnetic ferrites, Biologically Active Compounds: Stereo selective Synthesis, Isolation and characterization of bioactive materials, Macromolecules, Colloids and Drug Delivery, Environmental Chemistry, Energy from non-conventional sources, Aromaticity in metal clusters, Nanoparticle Catalysis, Nano Technology, Solid State Chemistry, Supra- molecular Chemistry, Transition metal chemistry, Self-assembly and metallahelicates in coordination chemistry, Organometallic Chemistry, Homogeneous Polymer Anchored Catalysis, Photochemistry & Photophysics in Organized Assemblies, Carbohydrates and Nucleosides Biological D u a l Perspectives, Enantiomeric Separation Using Capillary Electrophoresis, Density Functional Theory: Quantum Chaos, Chemical Reaction Dynamics in Liquids and Biological Systems, Computer Simulations of Complex Systems with Applications in Biology and Materials Science, Electrocatalysis, Electrochemical Biosensors, Chemical Reactivity, Quantum toxicology. Structural Engineering, Hydraulic and W ater Resources Engineering, Geotechnical Engineering, Transportation Engineering, Environmental Engineering and management. Artificial Intelligence, Speech and Language Processing, Software Reliability, Data-base systems, VLSI System Design, Embedded Systems, Fault Tolerant Computing, Distributed Systems, Computer Networks, Image Processing and Computer Vision, Computational Geometry, Theoretical Computer Science, Bioinformatics, Assistive Technology, Formal Verification, Cryptography and Network Security. Production, Storage and Utilization of Industrial Gases, Air Separation, Mass Transfer and Separation Processes, Natural Gas Processing and Liquefaction. Hydrogen Energy, Low Temperature Adsorption of Gases, Gas Hydrates, Computer Aided Design of Cryogenic Process Plants, Closed Cycle Cryocoolers, Low Temperature Heat Exchangers, Expansion Machines, Heat Transfer, Cryogenic Rocket Propulsion, Air Breathing Propulsion, Magnetic Refrigeration Materials, Nanofluids, Spintronics, Superconducting Magnets and Applications, Thermo Physical Properties of Nanoscale Materials, Cryobiology, Magnetic Sensors, Vacuum Technology and Process Applications. Helium Liquefaction and Refrigeration, Oxygen Safety, Superconducting Magnetic Energy Storage, Cryogenic/Superconducting/Vacuum aspects for nuclear fusion and Power Applications.
KHCH01
KHCY01
Chemistry
KHCE01
Civil Engineering Computer Science and Engineering
KHCS01
KHCR01
Cryogenic Engineering
40
Code
Department
1. Machine Drives and Power Electronics: Control of drives, Switched mode and resonant mode power supplies, Power Converters, Medium voltage converter topology and drives, Digital control of SMPS, Energy Efficient drives, Electro-magnetic Levitation, Micro Motors including digital devices, Variable Speed Constant Frequency Generation Systems, Automated Electrical Vehicles, Non-linear Phenomena in Power Electronics, Bifurcation and Chaos in Hybrid Dynamical Systems. 2. Control System Engineering: System identification and modeling, Fault detection and diagnosis, Robust control, Intelligent control, System Theory, Fault tolerant control, Large-scale systems, Reduced order modeling, Fuzzy control, Periodic controllers, Attitude and orbit control of launch vehicles and satellites, Embedded Systems. 3. Power & Energy Systems: Power Systems Analysis, Dynamics, Modeling and Control, Power System Stability, Protection, Real-time Simulation, High Voltage Engineering, Photovoltaic, W ind Energy, Energy modeling and Management, Insulation Engineering, Condition monitoring of power apparatus, Digital relaying, Power Quality, Electrical Power distribution systems, Power System deregulation, FACTS design including devices, Distributed generation, Microgrid. 4. Instrumentation and Signal Processing: Sensor design and modeling, Signal conditioning circuits, Embedded systems, Opto-electronic Instrumentation, Biomedical Instrumentation, Image based measurement, Image and Speech Processing, Analog and mixed signal processing, Digital signal processing, MEMS sensors and actuators, VLSI design and testing, Bio-reactor control, W ireless sensors. Device modeling, Technology CAD, Silicon heterosructures, Compound semiconductor electronic and optical devices, MEMS and Nanotechnology, Mixed signal design, Low voltage low power circuit design, Low power RF IC design, Design of VLS based signal processing chips, SOC base embedded system for biomedical instrumentation, VLSI Testing, Fault diagnosis, Design Automation of Analog VLSI circuits, Circuits for high speed wired link, On-chip power management. Antennas, Planar and Waveguide Circuits, RFICs; RF MEMS; Metamaterials; RF- VLSI Interconnects; EMI, EMC, EMP, Radar cross section, Microwave Imaging; Channel Modeling for Wireless Communication.
KHEE01
KHEC01
Electronics and Electrical Communication Engineering
Image and Video Coding, Computer Vision, Video Surveillance, Medical Image processing Multimedia, Database, Multimedia Network, VLSI Architecture, Parallel and distributed Processing, Audio coding, Computer architecture, embedded systems. Computer Networks, W ireless Communications and Networking, Wireless Internet, Multiuser Receiver, Multiband OFDM, Channel Coding, Link Adaptation Techniques, MIMO Systems, Capacity Mobile Adhoc Networks, Wireless Sensor Networks, Optical Communications and Networking, WDM Transmission, Fiber Nonlinearities, W avelength routed Networks, Passive Optical Networks, Optical Burst Switching, Cognitive Radio, 4G Cellular, Fiber Optics, Fiber Optic Sensors, Fiber Optic amplifiers and Lasers, Plasmonics, Photonic Crystal Fibers and Waveguides. Architectural Optimization, Adaptive Filters, W avelets and Multirate-DSP, DSP Application in W ireless Communication, Biomedical Signature Analysis, Voice Signature Analysis, Detection and Estimation, Modeling of Signals and Systems Igneous and Metamorphic Petrology, Ore Petrology, Geochemistry and Mineralogy, Isotope Geology, Precambrian Geology and Tectonics, Structural Geology, Microtectonics, Stratigraphy and Sedimentary Geology, Basin Analysis, Applied Micropaleontology, Paleoceanography and Paleoclimatology, Coastal and Quaternary Geology, Mineral Exploration and Resource Potential Mapping, Hydrogeology, Groundwater Contamination, Remote Sensing and GIS, Environmental Geochemistry of water, soil and air-their contamination by natural and anthropogenic factors, Landslide Hazards, Biogeochemistry of trace metals in soil and water, Gravitational, Magnetic and Electrical Fields (including modeling and numerical analysis), Seismic and Electromagnetic wave Propagation (including modeling and numerical analysis), Nuclear Geology and Geophysics, Geophysical Exploration of minerals, ground water and hydrocarbons, Earthquake Hazard Assessment and Seismic Microzonation, Geotomography, Pattern Recognition in Geophysics, Strong Motion Seismometry, Computational Geophysics, Digital Communication, Mobile Communications, Information Theory and Capacity Analysis. Error Control Coding, Digital Signal Processing, Optical Communications, Tele Communication Networks, Multimedia Communications, Detection and Estimation Theory, RF and Digital Design for Telecommunication, Cognitive Radio. English Language and literature, American Literature, Afro-American Literature, Comparative Literature, Post-colonial Literature, Indian Literature, Dalit Literature, Indian Aesthetics, Media Culture, Culture Studies, Communication Studies of German. Econometrics and Applied Economics, Economic Planning and Policies, Managerial Economics, Organizational and Development Economics, Agricultural Economics, Manpower Planning. Human Resource Development and Management, Organizational and Social Psychology, Interpersonal Communications, Clinical Psychology and Neuropsychology. Philosophy of Mind, Logic, Applied Ethics. Rural and Urban Sociology, Sociology of Development and Sociology of Health. Operations Research, MIS, Facilities Planning and Design, Quality Engineering and Management, Production-Inventory Systems, Logistics and Supply Chain Management, Ergonomics and Human Factors Engineering, Safety and Risk Analysis, New Product Development, Intelligent DSS, Small W orld Networks, Software Project Management, Production Design, Lean/Agile Manufacturing, System Dynamics and E-Business. Minimum Qualification : Master's degree in Engineering/ Technology MBA with graduation in Engineering/Technology or equivalent with minimum of 60% marks (or equivalent grade point average)
KHGG01
Geology and Geophysics
KHGT01
G. S. Sanyal School of Telecommunication
KHHS01
KHIM01
Industrial Engineering and Management
41
Code
Department
Polymer Physics and Engineering, Rheology, Composites, Polymer Synthesis, Characterization and Application, Plastic/ Rubber Science and Technology, Adhesion, Biomaterials, Semiconductor Materials; Crystal Growth, Opto-electronic Materials, Semiconductor, W ide Band Gap Semiconductors, Synthesis and Processing of Glass and Ceramics, Nano-ceramics and Nanocomposites, Thin and thick Film Ceramic coatings, Magnetic Ceramics, Solid Oxide Fuels, Near net Shape Forming of Ceramic Components, Electronic ceramics, New materials, Chemical and Biological Sensors, Electronic Polymers, Lithium ion Batteries, Magnetic Materials, Organic Semi-conductors, MOCVD growth of III-V Semiconductors. Ferroelectric Thin Films, Nanofluids, Nanopastes /glues. Minimum Qualification : B.Tech/B.E Degree in Chemical Engineering/ Technology, Ceramic and glass Technology, Materials Technology, Plastic and/or Rubber Technology, Polymer Science and Technology / Biotechnology W ith 60% marks minimum. M.Sc. in Physics, Solid State Physics, Chemistry Material Science, Polymer Chemistry, Electronic Science. W ith 60% marks minimum
KHMS01
Materials Science
KHMA01
Mathematics
Fluid Mechanics, Numerical Analysis, Statistics, Operation Research, Computer Science, Functional Analysis, Complex Analysis, Computational Fluid Dynamics, Image Processing, Algebra, Fuzzy Mathematics, Artificial Intelligence, Data Base Management Systems. Cryptography. Fluid machanics.CFD, Hydrodynamic stability, Multiphase flow, Numerical heat transfer, Experimental heat transfer and fluid flow, Liquid fuel atomization, and Spray combustion, I.C Engines, Fluidised bed combustion, Refrigeration and air conditioning, Transcritical CO 2 and natural refrigerant based heat pumps, Thermal systems modeling and optimization, Solar energy, Optical diagnostics of thermo-fluid systems, Thermal hydraulics of nuclear plants, Microfluidics and Micro- scale transport processes. Casting, W elding and Metal forming, Maching and grinding, Machine tools, Cutting tools and coating, Tool condition monitoring, Plasma-spray ceramic coating, Electrophysical machining process, Precision manufacturing and laser processing, Computer aided design and manufacturing, Computer Aided Process Planning, Rapid Prototyping, Intelligent Machines and Systems, Numerical Modeling of Manufacturing Process. Systems, Modeling and design using Bond Graphs, Modeling and control of Microsystems, MEMS, Automotive Engineering, Noise Vibration Control, Signal Processing in Mechanical Systems. Finite Element Method and Boundary Element Method, Computational solid mechanics, Non-linear Mechanics, Fracture mechanics, Composite materials, Smart materials and Structures, Biomechanics, I n d u s t r i a l , bio- and nano- Tribology, Surface Engineering, Mechanical Systems Dynamics, Rotor Dynamics, Vehicle Dynamics ,Bifurcation and Chaos, Condition monitoring and Fault tolerant control, Mechanical handling systems and Industrial automation, Industrial fluid power and control. Physical Metallurgy, Extractive Metallurgy and Mineral Processing, Steel Technology, Process Modeling, Corrosion Science and Technology, Mechanical Metallurgy, Structural Integrity, Casting and Solidification, Powder Metallurgy, W elding Metallurgy, Computational Material Science and Technology, Nanostructured Materials, Bulk Metallic Glasses, Biomaterials, Electronic and Magnetic Materials, Functionally graded Materials, Intermetallics, Composites. Tribology and Surface Engineering, Thin Films and Coatings. Experimental and computational geomechanics, Ore body modeling and Geostatistics, Advanced Surveying, GIS and remote sensing; Subsurface and surface environment (heat, air, water and soil), Fly ash characterization and utilization, Occupational health and safety, Mining systems and management, Mineral economics and appraisal of mineral property., Material- Rock Interaction, Mine and Plant Evaluation, Mineral Quality Control, Slope Stability, Environmental Impact Assessment and Management, W aste Remediation, Mining Machinery & Bulk material Handling, clean coal technology; coalbed methane and Shale gas; Mineral processing. B.Tech/BE/ in Mining Engineering, Petroleum Engineering, Chemical Engineering, Mining Machinery and Mineral Processing, M.Sc in Physics, Applied Geology, Mathematics and Geo-Informatics, M.Tech.in Chemistry, Geo-Informatics and Geo-Physics. Marine Hydrodynamics, Marine & Ocean Structures, Ocean Engineering Materials, Fluid Structure Interaction, Marine Design, Marine Production and welding, Ocean Engineering, Coastal Engineering, W ater W ave Mechanics, Physical and Dynamical Oceanography, Ocean Wave Modeling, CFD. Astrophysics & Cosmology, Condensed Matter Physics, Ferroelectrics & Dielectrics, Fiber Optics, Magnetism, Multiferroics, Nanoscience & Nanotechnology, Nonlinear Optics, Nonlinear Instability, Nuclear Physics, Quantum Mechanics & Field Theory, Radiation Measurements, Semiconductor Devices, Solid State Ionics, Thin Films, Renewable Energy Sources. Polymer blend & alloys, Composites, Polymer and Rubber Processing, Product Development, Polymerization, Development of Novel Polymers, Structure-Property Correlation, W aste Polymer Recycling, Thermoplastic Elastomer, Adhesion and Surface Treatment, Nanocomposites, Polymer Rheology, Smart Polymers. Minimum Qualification : Master's degree in Science/ Engineering/ Technology or its equivalent with minimum 60% marks.
KHME01
KHMT01
Metallurgical and Materials Engineering
KHMN01
Mining Engineering
KHOE01
Ocean Engineering and Naval Architecture Physics and Meteorology
KHPH01
KHRT01
Rubber Technology
KHRD01
Rural Development
Transfer of technology; Socio-economic aspects of Rural Development, Planning and development models, Crop, water and land use planning; Information Technology in Rural Development, Tribal Development, Upgradation of technology.
42
Code
Department
Minimum Qualification :
KHRE01
Reliability Engineering
System Reliability assessment, Reliability and design, Reliability simulation, Machinery Fault Diagnosis, Maintenance Engineering & Management, Risk and Safety Assessment, Software reliability.
Minimum 60% marks (or equivalent Grade point average) in Electrical, Electronics, Civil, Computer Science, Mechanical and allied branches of the above.
KHIT01
School of Information Technology
Computer Security, Computer Vision, Image Processing, Pattern Recognition, Data Minining, Distributed Systems, E-Commerce, E-Learning, Geographical Information Systems, Human Computer Interaction, Information and Database Systems, Internet Technologies, Mobile Computing, Multimedia Systems, Software Engineering, VLSI Design, Speech Processing. W ireless adhoc networks, W ireless Sensor network, Vehicular abhoc networks
Minimum Qualification: M.E/M.Tech.in Information Technology or Computer Science & Engineering or Electronics & Communication Engineering Or Electrical Engineering.
KHID01
Ranbir and Chitra Gupta School of Infrastructure Design and Management
Airport Planning and Management, Building Automation and Management Systems; Eco-industrial infrastructure; Energy management in infrastructure; Environmental Planning; Facility Management & Specialized Building Design; Housing Infrastructure; HVAC systems planning; Infrastructure finance; Infrastructure Information Management; Infrastructure Project Management; Infrastructure Regulatory issues; Municipal Infrastructure; Non-Conventional Electrical Energy Systems; Port Infrastructure Planning; Power Infrastructure; Generation, Transmission and Distribution; Power Infrastructure; Planning, Economics, Management and Reliability, Recreational and Tourism Infrastructure; Regional Infrastructure; Remote Sensing and GIS; Rural Infrastructure; Simulation and Virtual Reality applications; Social Infrastructure; Education and Health; Thermal, Hydel and Nuclear Power Generation; Transportation Systems Planning Operation and Management; Waste Water and Solid Waste Management; Water Supply Sanitation Systems.
VGSOM
According, Finance, Business Economics, Strategy, Technology Management, Operations management, Organizational Behavior, Human Resource Management, Marketing, Business Communication. Eligibility: MBA with a Postgraduate Degree/M.Tech/A Post Graduate Degree.
43
7. Indian Institute of Technology Madras, Chennai 600036 MD

The minimum educational qualifications for admission to the Ph.D. programme of the Institute are as follows: Ph.D. in Engineering: Candidates with a Masters degree in Engineering/Technology with a good academic record or a Masters degree by Research in Engineering/Technology with a good academic record. Candidates with Masters degree in Sciences with a good academic record and of exceptional merit where eligible, for the relevant Engineering discipline. Ph.D. in Sciences: Masters degree in Sciences with a good academic record. Masters degree in Engineering/Technology where eligible with a good academic record. Ph.D. in Humanities and Social Sciences: Masters degree in an eligible discipline with a good academic record. Ph.D. in Management: Masters degree in an eligible discipline with a good academic record
Code
Department
Aerodynamics: Subsonic, Transonic, Supersonic, Hypersonic,Rarefied Gas flows (Theoretical and Experimental), Boundary Layers and Stability of Flows, Turbulent Flows, Shock Tubes and Related Problems, Development of Algorithms and Code for Numerical Methods in Gas Dynamics and Computational Fluid Dynamics, Vortex Dynamics, Supersonic Mixing and Combustion, Optical Flow Diagnostics, Linear and Nonlinear Acoustics.Aircraft Structures: Finite Element Methods, Numerical Methods, Photo Elasticity, Moire and Holographic Methods of Structural Analysis. Composite Structures, Fatigue and Fracture Mechanics, Contact Mechanics, Vibration and Impact Mechanics. Aerospace Propulsion: Rocket Propulsion and Solid Propellant Combustion, Airbreathing Propulsion and Combustion, Cascade Flows, Multiphase Flow Simulation, Combustion Instability, Optical Flow/Combustion Diagnostics. Dynamics & Control: Non-Linear Dynamics in Aerospace Applications, Computational Methods in Nonlinear Dynamics, Nonlinear Control Theory and Applications, Flight Simulations and Controller Development, Design Development of Autonomous Flying Vehicles. Biomedical Engineering : Cardiovascular System studies, image and Signal Processing, Speech Signal Processing, Ultrasound and Laser instrumentation in Medicine, Biomechanics, Rehabilitation Engineering, Evoked Response and Functional Electrical Stimulation, Physiological Modeling, Biomaterials, Biosensors, Medical Diagnostics.
MDAE01
Masters degree or its equivalent in Aerospace /Civil /Applied Mechanics/ Mechanical/ Chemical or Masters degree in Mathematics/Physics and aptitude for research. Science Post- graduates should have exceptional merit and research or industrial experience in the appropriate field. Candidates with Masters degree in other allied engineering specializations can also be considered provided they have either basic degree in Aerospace Engineering or at least five years experience in Aerospace industry / Research Organisation.
Biomedical Engineering area: Masters degree in Applied Mechanics / Civil / ECE /Mechanical/Electrical/ Biomedical Engineering/ Computer Science/ Instrumentation/ Metallurgical Engineering. Fluid Mechanics area: Masters degree in Applied Mechanics / Civil / Mechanical / Aerospace / Chemical / Biomedical Engineering/ Engineering Mechanics Solid Mechanics area: Masters degree in Civil/ Aerospace/ Mechanical/ Naval Architecture, Production Engineering with an aptitude for research in Solid Mechanics
MDAM01
Applied Mechanics Fluid Mechanics: Laser Diagnostics, Turbulent Convection, Computational Fluid Dynamics (CFD), Bluff body and Industrial Aerodynamics, Fluid Structure Interaction, Experimental Fluid Mechanics, Sprays and multiphase flows. Solid Mechanics: Computational and Experimental studies in fatigue, fracture, smart materials, photo elasticity, plasticity, vibrations, control, composites, biomechanics, constitutive modeling and stochastic mechanics.
44
Code
Department
The research foci of our Department are (a) Medical Biotechnology, especially cardiovascular aspects and (b) Bioprocesses. Our faculty are working in various fundamental and applied aspects which include. Cellular, Molecular and Structural Biology related to Signal Transduction, Ion Channels, Lipid Trafficking, Stem Cell Proliferation/Culture, Cell Stresses, Cancer, Cell Death, etc.; Molecular Genetics of Plant Development. Proteinstructure prediction, Structure-functionrelationship. Molecular Modeling;Protein-ligand Docking; Computational Neuroscience; Signal Processing; Neural Networks; Character Recognition; Bioinformatics. Drug design, QSAR; siRNA Delivery. Bio-catalysis; Enzymes in Organic (asymmetric) Synthesis; Biosensors. Biotransformation; Molecular Bioremediation; Biodegradation; Green Chemistry. Bioreactor Design and Analysis; Simulation and Control of Bioprocesses; Reactive Oxygen species in Bioreactors; Liquid Phase Oxygen-supply Strategy; Metabolic Engineering; Cloning of Therapeutic Proteins; Ethanol from Biomass; Plant tissue and Animal cell Culture; Downstream Processing; Scale-up; Biomaterials; Biomechanics; Biomedical Devices and Implants Chemical reaction engineering and thermodynamics, transport processes, process design and control, environmental engineering, polymer science and technology, semiconductor materials processing, and particle technology. Fundamental studies: Mathematical modeling of physico-chemical phenomena. Applied statistical mechanics, thermodynamic property estimation, phase equilibria. Flow characterization using lasers microwave assisted thawing. Drying, multicomponent boiling and condensation. Simultaneous h eat an d mass transfer processes. Modeling of processes and equipments: Hydrodynamic and kinetic studies of turbulent bed contactors, trickle beds, slurry reactors, fast and inverse bed fluidized beds. CFD analysis of process equipments. Advanced separation processes such as reactive and azeotropic distillation, membrane processes. Modeling of rotary kilns, crushing and grinding equipments, fluid energy mills of Microelectronic fabrication techniques. Development, characterization and processing of materials: Development of polymer blends and composites, polymer based nano-composites. Rheology of polymers and colloids; damping and vibration isolation using polymers. Enzyme design and engineering, protein engineering and production of recombinant proteins. Process design and control, systems engineering: Advanced control design such as adaptive control, intelligent control, non-linear control, fault diagnosis and fault tolerant control. Synthesis and optimization of process systems; statistical data processing. Simulation an d op t i m i z at i on of crushing and grinding circuits. Environmental engineering and waste reduction: Liquid and solid waste treatment, air pollution monitoring and control, toxic and hazardous waste management, environmental risk assessment, colour removal from waste water. Recycling of mixed plastic waste. Analytical Chemistry, Bioinorganic Chemistry, Chemistry of Main Group Elements, Inorganic Heterocycles, Material Science, Synthetic and Structural Solid State Chemistry, Nanomaterials; Cage and Cluster Chemistry; Transition Metal Organometallics. Organic Synthesis, Natural products, Organometallics, Asymmetric Catalysis, Synthetic and Structural Carbohydrate Chemistry, Bioorganic Chemistry, Enzymes in Organic Synthesis; Homogeneous and Heterogeneous Catalysis, Surface Chemistry, Theoretical and Experimental Electrochemistry, Photochemistry, Polymer Chemistry and its Applications, Gas-phase Chemistry, Monolayers and Clusters; Green Chemistry. Chemical Physics, Quantum and Theoretical Chemistry, Chemical Reaction Dynamics, Theoretical and Experimental Spectroscopy, Magnetic Resonance Spectroscopy and Imaging (especially NMR based), Fluorescence Spectroscopy, Nuclear Spectroscopy.
MDBT01
Biotechnology
Same as for our regular Ph.D. programme
MDCH01
Masters degree in Chemical Engineering or any other related discipline of Engineering or Technology
MDCY01
Chemistry
Masters degree in Chemistry. (General, Applied, Analytical, Inorganic, Physical, Organic and Bio) M.Sc. in Physics or M.Tech degree holders with adequate background in Chemistry will also be considered.
45
Code
Department
Masters degree in Civil, Ocean or Industrial Engineering, Industrial Management or MBA, or in Architecture, Housing, Town & Country planning after obtaining a basic degree in Civil Engineering, or Architecture with first Class. M.Tech or M.S. or equivalent degree in Engineering Mechanics/ Aerospace Engineering/ Agricultural Engineering / Civil Engineering / Environmental Engineering Or M. Tech or M.Sc. or equivalent degree in Environmental Science & Engineering / Chemical Engineering / Biotechnology / Applied Geology. Masters degree in Civil or Ocean Engineering Or Engineering Mechanics, Mining Engineers. W ith two years experience. Masters degree in Civil, Ocean, Aerospace, Naval Architecture, Mechanical, Computer Science or in Engineering Mechanics with basic degree in Civil Engineering or Infrastructural Civil Engineering. Masters degree in Civil/Architecture/Town and Country Planning/Regional Planning/City Planning/ Urban Engineering or 2 years full time Postgraduate Diploma in Town and Country Planning with specialization in Traffic and Transportation Planning of the School of Planning and Architecture, New Delhi / MBA after obtaining a basic degree in Civil Engineering
MDCE01
Building Technology & Construction Management
MDCE02
Environmental and W ater Resources Engineering
MDCE03
Civil Engineering
MDCE04
MDCE05
Transportation Engineering
MDCS01 Computer Science & Engineering
Automata theory and Formal languages, Analysis of algorithms, Graph theory, Unconventional Methods of Computing, Cryptography. Software Engineering, Object Oriented Systems, Parallel and Distributed systems, Mobile Computing, Programming languages, Performance evaluation. Software for VLSI design, Computer architecture, Computer graphics and Visualization. Computer Communication and networks, Network Protocols and security, Real- time systems, Wireless Sensor Networks. Data bases, Knowledge based systems, Data mining, Artificial intelligence, Machine learning, Indian language systems, Speech and vision systems, Artificial neural networks, compilers. Communication Systems, Communication Networks, Image and Signal Processing, Speech and Image Processing W ireless Communication, Information theory, Optical communications, RF, Photonics, VLSI Design, Microelectronics, MEMS, Power Electronics, Power Systems, Machines, Control, Instrumentation, Biomedical Devices.
Masters degree in Engineering/ Technology. Preference will be given to those with M.Tech/M.S degree in Computer Science & Engineering & Information Technology
MDEE01
Masters degree in Electrical or Electronics and Communication Engineering, Instrumentation Engineering or Masters degree in Physics followed by a Masters degree in Engineering in an area of relevance to the area of research.
46
Code
Department
Automotive Engineering: Vehicle Dynamics, Tyre Mechanics, Mathematical Modeling of Dynamic Systems, Control, Fault Diagnosis, Automotive Systems, Intelligent Transportation Systems Biomedical Design: Medical Imaging, Biomechanical Modeling, Soft Tissue Mechanics, Bio-fluid Mechanics, Prosthetic and Scaffold Design, Biomedical Devices and Control, Microwave Applications, Tissue Ablation and Hyperthermia Physics, Radiometry, Ergonomics, Rehabilitation Engineering Materials and Design: Geometric and Solid Modeling, Computational Geometry, Shape Search, Shape Optimization, Image Based Reconstruction, Solid Free Form Fabrication, Design Theory, Reliability, Fatigue and Fracture, Finite Element Analysis, Sustainable Manufacturing Robotics and Mechatronics: Parallel Manipulators, Underwater Robots, Path Planning, System Dynamics and Control, Opto-mechatronics, Sensing. British, American, Common W ealth and New Literatures in English; Applied and Theoretical Linguistics; Philosophy of Language and Continental Philosophy; English Language Teaching (ELT); German Studies; European Studies; Political Philosophy; Modern Indian History; Applied Economics and Sociology; Science and Technology Policy Studies; Environment and Natural Resources Policy; Health care Policy.
Masters degree in Aerospace, Automobile, Biomedical, Civil, Computer Science,
Electrical, Electronics, Engineering Physics, Instrumentation, Mechanical, Metallurgical,
MDER01
Engineering Design
Material Science, Naval Architecture, Production/ Manufacturing Engineering, or
Masters degree in Design (Engineering) (M.Des.) or M.Tech. (Industrial Mathematics).
MDHS01
Humanities & Social Science
Masters degree in relevant discipline
MDMS01
Management Studies
Technology Management, Knowledge Management, Financial Management, Human Resource Management, Organizational Behavior, Marketing Management, Operations Management, Supply Chain Management, Project Management, Information Systems & Management, Management Theory, Methodologies and Practices
60% and above for UG and PG in Social Sciences and Arts; 70% for UG and PG in Engineering and Management (BE/B.Tech./M.E./M.Tech./MBA); [60% for AMIE and other Associate ships.] [SC/ST candidates will be given 5% relaxation from the above]
MDMA01
Mathematics
Functional Analysis, Operator Equations, Inverse problems, Fixed Point Theory, Harmonic analysis Differential Equations, Special Functions, Complex Analysis, Non-linear Analysis, conformal geometry, Fuzzy sets- Theory and Applications, summability Theory, Algebra, communication and coding Theory, Numerical Analysis, Numerical Linear Algebra, Fluid Mechanics, Computational Fluid Dynamics, Mathematical Physics, Mathematical Modeling, Applied Probability and Stochastic Process, Queuing Theory, Inventory, Control, reliability, Computer Modeling and Simulation, Theoretical Computer Science Algorithms, Complexity Theory, Database, Theory of Programming, Fractal Functions, Fractal Image Compression, CAGD, Statistical Quality Control/ Sequential Wavelets Analysis/Geostatistics Fuzzy classification/Cluster Analysis/Financial Statistical Inference
Masters Degree in Mathematics / Statistics /Physics / Computer Science or M.Tech (Industrial Mathematics & Scientific Computing). /Statistics M.B.A. (Finance for financial Statistics)/ Statistics Geology or Geophysics for Geostatistics
47
Code
Department
(i) Design Engineering: Machine Elements ~ design development, analysis and performance improvements, New materials and design, composites, nano composites, bio materials, surface engineering, design process, contact mechanics, tribology, tyre mechanics, biomechanics, fatigue and failure analysis, computational and experimental fracture mechanics, fatigue crack closure environment interaction studies, alternate small specimen test methods, small crack propagation under biaxial multiaxialloading, multi crack interaction studies, fatigue damage in composites, failure mechanics of biomaterials. Non linear finite element analysis, Vibration, finite element including coupled problems, Non destructive evaluation, structural health monitoring, Materials Characterization, Measurements of Material Properties and Behavior, machinery signal processing, Condition monitoring of structures machines, machinery diagnosis, and combustion flame noise, Acoustics and Noise Control. (ii) Manufacturing Engineering: Manufacturing Processes, Technologies, CAD/CAM, Manufacturing Planning and Control, Metrology and Computer Aided Inspection, Quality Control, Fracture Mechanics, Materials behavior in Manufacturing, Surface Treatment, Machining Process, Condition Monitoring, Flexible Manufacturing Systems, Computer Integrated Manufacturing, Non Traditional Machining; Precision Gearing, Sintered Bearings, Manufacturing Methods in Precision Engineering, Surface Technology, Active Noise Control systems, Active Suspensions, Microprocessor Based System Design, Electrohydraulic Servo and Proportional Controls, Pneumatic Systems, Robot-Kinematics, Dynamics, Design and Controls, Multibody Dynamics, System Simulation, Microhydraulics, Mechatronics, Microactuators, MEMS (iii) Thermal Engineering: Micro-miniature and small cryogenic refrigerators, Simulation and optimization of air separation cycles, Heat Transfer in Nano-fluids, Heat Transfer in Multi-Phase Flows, Flow Structure Interaction in High Speed Turbo machinery Seals, Heat Transfer Experiments in Phase Change Material Based Composite Heat Sinks, Two Phase Flow Convection Experiments and Numerical Methods in Porous Media, Solid State Hydrogen Storage, Sorption heating and cooling systems, Desiccant/evaporative cooling and airconditioning, Conjugate heat transfer in low and high speed flows, Retrieval of geophysical parameters in the atmosphere in the microwave and infra red regions, Turbine rotor stator interaction, Performance improvement of centrifugal compressor by tip modification, subsonic cascade studies, Cavitation in hydraulic machines, Acoustics of Supersonic Jets, Active and Passive Control of High speed flows, Combustion noise, Emissions, Ruid Combustion, Propulsion, CFD high speed reacting flows, I.C Engine Combustion and Emissions, alternative fuels, CFD applications in I.C Engines and Gas turbine combustion chambers, fluid flow, heat transfer and combustion related to I.C Engines, advanced I.C Engine, technologies such as homogeneous change, compression ignition, gasoline direct injection, engine management, Simulation of engine processes and modeling Combustion diagnostics in engines Heat Transfer in Fuel Cells, Fluidized Bed Combustion, Solar Power Systems, Optimization of Solar Ics Systems.
MDME01
Masters degree in Mechanical Engineering, Aerospace Engineering, Automobile Engineering, Automotive Engine Tech., BioMedical Engineering, Chemical Engineering, Computer Science, Electrical Engineering, Electronics, Energy Engineering, Industrial Engineering, Instrumentation, Maintenance Management, Metallurgical Engineering, Production/ Manufacturing Engineering, Agricultural Engineering and in related areas depending on the research topics.
48
Code
Department
Metal casting, Metal forming, Metal joining, Materials Technology, Physical and Structural Metallurgy, Mechanical Metallurgy, Chemical Metallurgy, Thermodynamics of Metallurgical Systems,. Powder Metallurgy, Ceramics and Composites, Corrosion, Surface Engineering, Biomaterials, Simulation and Modeling of Materials Processing Nanostructured Materials, Magnetic Materials, Amorphous Alloys, Nonequilibrium Processing, Hydrogen Storage Materials, Smart Materials, Fuel Cells, Metallic Foams, Chemical Sensors, Carbon Nanotubes, Special Steels, Superalloys, Intermetallics, Materials for Optoelectronic Applications, Shape Memory Alloys, Fatigues and Fracture Mechanics, High Temperature Behavior of Materials and Creep.
MDMM01
Metallurgical & Materials Engineering
Masters degree or equivalent in Metallurgical Engineering or other appropriate branch of Engineering/ Technology. Engineering graduates (B.Tech/BE or equivalent) and Science postgraduates (M.Sc. or equivalent) to be considered should have exceptional merit and research or industrial experience in the appropriate field.
MDOE01
Ocean Engineering
Masters degree in Aerospace Engineering, Civil Engineering, Marine Engineering, Mechanical Engineering, Marine Structures, Naval Architecture, Ocean Engineering Or any other appropriate engineering discipline. OR M.Sc in Physics, Mathematics,
Ocean Engineering
MDOE02
Petroleum Engineering
Masters degree in Chemical Engineering, Civil Engineering, Marine Engineering, Mechanical Engineering, Marine Structures, Naval Architecture, Ocean Engineering, Petroleum Engineering Or any other appropriate engineering discipline. OR M.Sc. in Physics, Mathematics, Statistics, Oceanography, Geology and Geophysics.
MDPH01
Physics
Applied Optics, Quantum Optics, Photonics and nonlinear optics, Atomic and Molecular Physics, Complex fluids, Dynamical systems, Statistical physics and field theory, Low temperature physics and superconductivity, Magnetism and Magnetic materials, Hydrogen Storage Materials, Microwaves and Dielectrics, Semiconductor Physics, Photovoltaics, Solid State lonics and molecular electronics, Thin film phenomena, X-ray diffraction and Amorphous systems, Spintronix and Diluted Magnetic Semiconductors, Condensed Matter Physics/Magnetism in Oxides/Magnetic Materials, Electronic structure of solids/Computational material science, Nonlinear Dynamics, Quantum Chaos, Quantum Information, Metaloxide Thin films, Nanostructured thin films and heterostructures by PLD.
M.Sc/M.Sc (Tech) in Physics, Applied Physics, Materials Science/M.Tech (Solid State Technology) / M.Tech. (Materials Science) or equivalent.
49
8. Indian Institute of Technology Roorkee, Roorkee 247 667 RR

Minimum Qualification: Master's Degree in Engineering/Technology/Architecture/Urban & Rural Planning/ Pharmacy/ Computer Applications of 3 years duration after graduation in respective discipline or equivalent with a minimum Cumulative Grade Point Average (CGPA) of 6.00 on a 10 point scale or equivalent as determined by the institute wherever letter grades are awarded or 60% mar ks in aggregate (of all years/semesters) where marks are awarded or Masters degree in Sciences / Humanities & Social Sciences / Management in respective discipline or equivalent with a valid NET (CSIR/UGC)/NET (LS) or valid GATE or valid GPAT score and minimum cumulative Grade Point Average (CGPA) of 6.00 on a 10 point scale or equivalent as determined by the Institute where letter grades are awarded; or 60% marks where marks are awarded or Applicants with B.Tech./ B.Arch. degree or equivalent in respecti ve discipline with excellent academic record (with minimum CGPA of 7.00 on a 10 point scale or equivalent or 70% marks) may be cons idered eligible for admission. For SC/ST/PD candidates the eligibility requirement of CGPA may be relaxed to 5.50 on a 10 point sc ale or equivalent, or 55% marks. The SC/ST/PD applicants holding B.Tech. Degree or equivalent may be allowed 5% relaxation in marks of equivalent relaxation in CGPA.
Code
Department
(i) B.Tech/M.Tech or equivalent in Civil/ Electrical Mechanical Industrial/ Chemical/ Environmental/ Agricultural/ Computer Electronics Engineering. (ii) M.Sc. in disciplines consistent research areas of the centre. with
RRAH01
Alternate Hydro Energy Centre
Small Hydro Energy and other Renewable Energy Development.
Environmental Management of Rivers and Lakes
RRAR01
Architecture and Planning
Architecture, Urban and rural planning, Built Environment including urban design and landscape design, Building science and architecture, Energy and architecture planning, Architectural Climatology, Ecology in relation to architecture and planning, Art in relation to architecture.
Masters degree in Architecture / Planning or its equivalent viz. P.G. Diploma in Planning awarded by CEPT / SPA or Diploma in TCPI awarded by ITP (India) with basic degree in Architecture OR Civil Engineering.
Transport Processes: Transport phenomena, Fluid dynamics, Fluidization Engineering, Packed beds, Slurry transport, Boiling and condensation, Mixing phenomena, Gas-liquid-solid mass transfer. Adsorption, Catalysis and Reaction Engineering, Process Intensification, Membrane separation process, Flow of emulsions, Heat integrated Distillation. Computer Aided Process Plant Design: Modeling and simulation of Chemical processes. Analysis and optimization o f c h e m i c a l process systems, Heat exchanger networks. Distillation columns. Catalytic reactors and Monolithic converters, Design of chemical equipment, Applied numerical methods, Dynamics and control of chemical processes and equipment, PC-based instrumentation and control, Process Integration, CFD. Industrial Pollution Abatement: Environment pollution control strategies, Modeling and simulation of pollution control systems. Modeling of dispersion of air and water pollutants. Treatment methodologies for air pollution and wastewater systems, Hazardous waste management. Risk analysis & hazard management. Energy Engineering: Design of energy efficient equipment and Energy conservation in chemical process industries, Bioenergy and Biomass energy systems. Biochemical Engineering and Down Stream Processing: Biochemical Engineering, Design, Simulation and control of bioreactors, Biogasification. Bioseparation.
(i) B.Tech./M.Tech. or equivalent in Chemical Engineering.
degree
RRCH01
(ii) B.Tech./M.Tech. or equivalent degree in any branch of Engineering/Chemical Technology and interdisciplinary areas.
RRCY01
Chemistry
Protein Chemistry, Liquid Chromatography, Enantiomeric resolution of racemic pharmaceuticals, Organic Reaction Mechanisms, Molecular Electro Chemistry, Chemical Sensors, Biosensors, W aste-water Treatment, Adsorption, Environmental Chemistry, Origin of Life, Kinetics & Photochemistry, Nanomaterials Chemistry, Organometallic, Synthetic Medicinal Chemistry, Statistical Mechanics of Polymer, Macrocyclic Chemistry Synthetic Heterocyclic Chemistry, Solvent Extraction, Polymer Chemistry Coordination Chemistry, BioInorganic Chemistry, Catalysis, Heme-Protein Catalysis, Theoretical Chemistry, Bioanalytical, Radiochemistry, Organic Electronics, Supra molecular Chemistry, Asymmetric Synthesis, Solid State Chemistry, Molecular Modeling and drug design.
(i) M.Sc. or equivalent degree in Chemistry/ Physics.. (ii) M.Sc. in Bio-technology or M.Sc. in Biochemistry.
50
Code
Department
Environment Engineering Environmental Pollution, Optimization of Distribution Networks, W ater and W aste W ater Quality Assessment and Treatment Alternatives, Industrial W aste W ater Treatment, Air Pollution Modeling, Abatement and Control Device, Environmental Impact Assessment & Control W ater Quality Modeling, Interdisciplinary Environmental Engineering. Problems.
RRCE01
RRCE02
Geotechnical Engineering Behavior of shallow and deep foundations under static and dynamic loading Problems of rock mechanics and Underground Space Technology, Static and Dynamic Soil structure Interaction, Problem of partially saturated soils, Expansive soil, Reinforced earth, Ground Improvement Engineering.
RRCE03
Hydraulics Engineering Sediment transport & Alluvial stream dynamics, Open channel flows, W ind tunnel studies on Turbulence, Boundary layer and Drag, Ground water hydrology, Ground water flow and transport modeling, W ater resources, Surface hydrology, Computational Hydraulics, Irrigation Engineering, Environmental Hydraulics. Civil Engineering (Specialization code number to be indicated in the data sheet)
(i) B.Tech./M.Tech. or equivalent degree in Civil Engineering. Candidate having a n M.Tech. Degree but not having a Bachelors degree i n Engineering must have studied Mathematics at the Bachelors level. (ii) B.Tech./M.Tech. degree in any branch of Engineering may be considered for research areas consistent with the academic background and experience. (iii) MSc. Degree in any branch of Science or MCA (with mathematics at the Bachelors level for both M.Sc. and MCA) may also be considered for research areas in Geometrics Engineering.
RRCE04
Geomatics Engineering, Surveying: Plan, Geodetic and GPS, Photogrammetry-close range, analytical and digital; Geodesy-Geometrical, Physical, Mathematical and Satellite: Remote Sensing-Optical and microwave; Hyperspectral, SAR interferometry: Digital image processing, AI soft computing Fuzzy theory, GIS. Web GIS Applications.
RRCE05
Structural Engineering: High rise buildings, Shear walled frames, Cable- stayed structures, Studies for wind effects, Finite element applications, Probabilistic design methods, girder bridges, fiber reinforced concrete, Off-shore structures, Pre-stressed concrete structures, Housing in hilly area, Composite materials (HSC/HPC, HVFAC/ HVERC), Masonry Structures, Dynamic Programming for construction project management, Energy efficient planning for buildings.
RRCE06
Transportation Engineering Highway material characterization for flexible and rigid pavements, Reinforced flexible pavements modified binders and mix design, composite pavements, pavements management systems, low cost pavements, mixed traffic flow modeling and simulation, highway capacity, Traffic simulation of Intersection analysis, Environmental impact assessment, mass transportation system analysis; Rural, Urban and Regional Transport Planning, Road Traffic Safety, Intelligent Transport System, GIS applications.
Geology: Engineering Geology; Environmental Geology; Geochemistry and Petrology; Geotechnical Investigation; Ore Geology; Petroleum Geology; Remote Sensing and GIS; Sedimentology; Stratigraphy and Paleontology; Structural Geology; W aste Disposal. Geophysics: Engineering Geophysics; Exploration Geophysics; Geodynamics; Seismology; Solid Earth Geophysics; Mathematical modeling and Inversion; Geoelectromagnetism. Master degree in Geology/ Geophysics / Applied Geology / Applied Geophysics/ Geological Technology / Geophysical Technology / Geosciences / Applied Geosciences / Petroleum Geology Petroleum Geophysics.
RRES01
Earth Sciences
51
Code
Department
Structural Dynamics: Dynamic analysis and design of structures like building, dams, bridges and nuclear power plants, Finite & element methods, Static and dynamic nonlinear analysis, Constitutive modeling, Computer aided analysis, Soil-Structure and fluidstructure interaction, Seismic base isolation, Seismic risk analysis, Random vibration theory and probabilistic design methods, Shake table and pseudo dynamic testing of structure and structural components, System identification, Structural response control / Performance Based Design, Seismic Vulnerability and Risk analysis. Soil Dynamics: Analytical and experimental studies on (i) dynamic soil properties, Seismic analysis and design of foundations, W ave propagation and ground response analysis, Liquefaction studies using laboratory and field tests, numerical modeling. Nonlinear constitutive models of soils, Finite element dynamic analysis of embankment dams, Dynamic soil-structure interaction analysis, Pile and well foundations for dynamic loads, Machine foundations, Model studies using geotechnical centrifuge for static and dynamic loads, Dynamic earth pressure and retaining walls, Soil improvement techniques, Reinforced earth and geotextiles for seismic loads, Field exploration using SPT, W ave propagation, Block vibration, Cross bore hole and SASW tests. Engineering Seismology and Seismotectonics: Microearthquake investigations, Estimation of earthquake source parameters, Seismotectonic modeling, Attenuation characteristics, Strong motion seismology, Broadband seismology, Characteristics of strong ground motion, Ground motion prediction, Estimation of response spectra and design spectra, Probabilistic and deterministic seismic hazard assessment, Vulnerability and Risk Assessment, Seismic microzonation, Remote sensing/ GIS/SAR based studies, Pattern Recognition, Earthquake Early Warnoy Systems.
(i) B.Tech. / M.Tech. or equivalent degree in Civil Engineering/ Earthquake Engineering/ any branch of Engineering. (ii) M.Sc./ M.Tech. in Geophysics/ Physics / Mathematics / Geology for research areas in Engineering Seismology and Seismotectonics.
RREQ01
Earthquake Engineering
Instrumentation: Power electronics, Electrical drives and their control, Electrical machines analysis and computer-aided design, Power Quality, Embedded Systems, Condition Monitoring of Rotating Electrical Machines, Power Systems Stability, State Estimation, Security, Reliability, Optimization, Expert Systems, Application of neural networks and Artificial Intelligence Techniques, Distribution System Automation, Relaying, Distribution system reforms and bench marking Selected area of HV engineering, Automatic Generation Control, Restructured Power Systems, Measurement techniques, Smart and intelligent transducer, Industrial and process instrumentation & control, Power system instrumentation, Applications of digital signal processing, AI & ANN Techniques in Instrumentation, (iii) Biomedical Instrumentation, Analysis and modeling of bioelectrical signals and systems, Medical Signals & (iv) Image (v) Processing, Operations research, Reliability engineering, Optimal scheduling, System modeling, Simulation and analysis, Model reduction techniques, Micro processor and microcomputer based systems for measurement, Monitoring, operation and control, Robotics, Control and optimization.
(i) (ii)
B.Tech./M.Tech. or equivalent degree in Electrical Engineering B.Tech./M.Tech. or equivalent degree in a branch of Engineering consistent with the research areas as mentioned by the Department from time to time.
RREE01
52
Code
RRLC01
Department
Communication Systems
(i) M.E. / M.Tech. in Microelectronics/ VLSI /Microwaves /Communication Systems / Control Systems / Instrumentation/Circuits & Systems or equivalent. (ii) B.E. / B.Tech. in Electronics & Communication / Electrical Engineering / or equivalent.
RRLC02
RF & Microwave Engineering
RRLC03 Electronics and Computer Engineering
Microelectronics and VLSI
RRLC04
Systems Modeling and Control
(iii) M.Sc. in Physics/Maaths/ Instrumentation/ Electronics
RRLC05
(i) M.E/M.Tech. in Information Technology /Computer Science & Engineering/ Software Engineering or equivalent. (ii) B.E/B.Tech in Computer Science & Engineering/ Information technology or equivalent. (i) M.Tech in Geological Technology Geophysical Technology or equivalent. and
RRDM01
Centre of Excellence in Disaster Mitigation & Management
Natural/Manmade Hazards and impact Assessment Hazard Monitoring, Prediction & Microzonation Data Processing Techniques & Models
(ii) M.B.A. or M.C.A. or M.Sc. in Physics/ Geophysics/ Geology/ Mathematics/ Environmental Sciences (with Maths in B.Sc) Computer Science or equivalent. (i) M.A. or equivalent degree.
RRHS01
Humanities and Social Science
English, Economics, Psychology and Sociology
(ii) Masters degree in Science / Graduate Degree in Engineering / Technology with 60% marks (or equivalent grade) may be considered for research areas consistent with the academic background and special interest. (i) Masters degree in Civil Engineering / W ater Resources Development/ Hydrology. (ii) Masters degree in Agricultural Engineering /Environmental Engineering/ Instrumentation W ater Use Management. (iii) M.Sc./ M.Tech in Geology / Geophysics / Soil Science / Forestry or Natural Resources/ Chemistry / Meteorology / Atmospheric Physics / Mathematics / Nuclear Physics & Environmental Sciences. (iv) M.Sc. Hydrology with Mathematics at Bachelors level.
RRHY01
Hydrology
Analysis of hydrological extremes, Stochastic hydrology, Parametric hydrology, Aquifer response modeling, Aquifer parameter estimation, Subsurface drainage, Coastal aquifers, Hydrogeology, Ground water geophysics, W atershed hydrology, Reservoir operation, System analysis of water resources, Photohydrology, Conjunctive use, Rainfall-runoff modeling, Hydraulic and hydrologic routing, Contaminant transport through open channels and porous media, Surface and ground water pollution assessment, W ater quality modeling Remediation of aquatic systems, W ater and W astewater Treatment.
RRMG01
Management Studies
International Marketing, Service Marketing, Marketing Management, Strategic Management, Health Care Management, Managing Non Profit Organizations, Supply Chain Management, Human Resources (i) Management, Organizational Behavior, Knowledge Management, Financial Accounting and Management, Quality Management, Fuzzy Mathematics, Nonlinear Dynamics and Chaos, Mathematics Finance, Statistical Field Theory, Quantum Information Theory and Quantum Computing, Optimization, General Management including Indian Philosophy Vedic Values, Rural Management & Marketing, Education Business Management, Management Teaching Management, Family Owned Businesses, Bottom of the Pyramid Markets & Business Opportunity Development.
(i) B.E. / B.Tech. or equivalent, M.E. / M.Tech. or equivalent qualifications. (ii) M.Sc. / M.A. / .Com. (iii) Master of Management / M.B.A. or equivalent.
53
Code
Department
Elasticity and Vibration, Fracture Mechanics, Fluid Mechanics, Computational Fluid Dynamics, Magneto Hydro Dynamics, Bio Mathematics, Numerical Analysis, Operations Research, reliability Theory, Control Theory,
(i)
RRMA01
Mathematics
Industrial Mathematics, Computer Applications, Image Processing, Computer Graphics, Theory of Functions and Summability, Approximation Theory, Harmonic Analysis, Functional analysis, Theory of Relativity and Cosmology, Statistics, Computerized Tomography, Abstract Algebra, Applied Algebra, Cryptography, Complex Analysis, Mathematical Modeling, Robotics & Control, Symbolic Computation, Theory of Differential Equation. I.C. Engines, Combustion, Air pollution, Refrigeration and air-conditioning, Fluid Mechanics, Heat transfer, Solar energy, Turbo machinery, Slurry Transportation, Erosion W ear, Computational Fluid Dynamics, CAM/CAD & Robotics Vibration and noise, Tribology, Vehicle dynamics, Railway safety, Solid Mechanics, Composite and smart structures, Fracture Mechanic, Machine Diagnostic and Condition Monitoring CAM/CAD Robotics. Machine tools and metal cutting, Nonconventional machining, Computer Aided Process Planning, CIM/FMS, Design for manufacturability, Foundry Engineering, Ergonomics, Industrial Engineering, Reliability and Maintenance Engineering, Metal forming, W elding Engineering CAM/CAD Robotics.
M.A. /M.Sc. in Applied Mathematics/ Statistics /Computer Science / Mathematics / Ind. Mathematics.
(ii) M.Stat. (iii) M.C.A.
RRME01
RRME02
Mechanical and Industrial Engineering
(i) B.Tech. / M.Tech. degree or equivalent degree in Mechanical / Industrial / Production Engineering. (ii) B.Tech. / M.Tech.degree in Aerospace / Chemical / Civil / Electrical / Metallurgical Engineering may be considered for research areas consistent with the academic background and special interests.
RRME03
RRMT01
Development of Ferrous and Non ferrous Materials, Solidification and P/M Processing of Materials, Mechanical Processing of Materials. Direct reduction process. Aqueous and hot Corrosion. Nano materials and composites. Tribology of materials. Advanced Welding Technologies and joining of dissimilar materials. Adhesive joining of polymers. Fatigue and fracture of materials. Electro Ceramics and Structural Ceramics. Energy Materials, Surface Modification and Coating, Polymer Technologies etc.
(i) B.Tech/ M.Tech. or equivalent, related to following discipline: Metallurgical Engineering, Materials Engineering, Nanotechnology Engineering, Physics, Engineering Chemistry, Ceramics, Polymers, Corrosion, Mechanical and Production Engineering, Chemical and Electrochemical Engineering. OR M.Sc. degree in Physics, Chemistry, Materials Science, are eligible for admission. For those with M.Sc. degree, Mathematics as a subject at B.Sc. degree level is an essential requirement. (ii) The candidates are eligible for research areas consistent with their academic background and special interests. B.Tech/M.Tech. or equivalent in Nanotechnology/ Met. & Mat. Engineering/ Mechanical Engineering/ Electronics & Communication / Electronics/ Biotechnology. M.Sc. (Physics/ Chemistry/ Biotechnology) or equivalent.
RRNT01
Centre of Nanotechnology
Synthesis of Nanowires/Nanocolloids/quantum Dots, Nanocomposites & their Coatings, Nanolbiotechnology, Nanosurface Engineering, Modeling & Simulation, Thin Films & Nanostructures, Photochemistry & Photophysics of Nanomaterials.
(i) M.Sc. in Physics/ Applied Physics. (ii) M.Sc. in Chemistry/ Mathematics / Biophysics/ Geophysics/ Computer Science, Provided Physics was a subject at B.Sc. level. (iii) B.Tech. or equivalent in Electrical/Electronics/ Chemical /Metallurgical/ E ngineering Physics. Candidates at Category (ii) and (iii) may be considered for research area consistent with the academic background and special interests.
RRPH01
Physics
Atmospheric Physics, Atomic and Molecular, Physics, Fiber Optics and Photonics, Laser Physics, Condensed Matter Physics, Nuclear Physics, Thin Film Devices, High Energy and Particle Physics.
54
Code
Department
(i) Water Resources Development
RRWR01
W ater Resources Development & Management
W ater Resources Planning, Design, Development and Management (Hydropower, W ater Supply, Flood, Control, Irrigation) Surface and Ground W ater Hydrology, Environmental, Impact Assessment , W ater Quality Modeling, Hydraulic and Hydrologic Design, Modeling River Engineering, System Analysis, Interbasin Transfer, Basin Planning and Development, Irrigation W ater Management, Agricultural Crop Planning, Natural Resources Management, using Remote Sensing and GIS.
B.E. / B.Tech. / M.E. / M.Tech or equivalent degree in Civil, Electrical, Mechanical & Agricultural Engineering. (ii) Irrigation Water Management Masters Degree in Agricultural Sciences / Social Sciences / Chemical Engineering / Biological Sciences / Environmental Sciences/ Engineering / Natural Sciences with at least one paper of Mathematics at the graduate level.
RRBT01
Biotechnology
Molecular Biophysics, Genetics, Microbiology & Microbial Biotechnology, Molecular Biology & Proteomics, Endocrinology, Environmental Biotechnology, Plant Biotechnology, Biochemical Engineering, Biochemistry Protein Crystallography & Bioinformatics, Virology.
Bachelors / Masters degree in Medical Sciences, Chemical/ Biochemical/ Biomedical Engineering, pharmacy, veterinary and related disciplines.
RRPP01
Paper Technology (Saharanpur Campus)
Pulp Processing, Non-wood fiber pulping, Secondary fiber pulping, recycling, Paper Making, Paper Properties, Printing, Energy management, Chemical Recovery, Environmental Science & Engineering, Pollution free bleaching, Modeling of Process Systems, wood chemistry, Electronics, Instrumentation and communication, Biotechnology, Nanotechnology.
B.E/B.Tech./M.E./ M.Tech. or equivalent degree in Pulp & Paper, Chemical, Mechanical, Electrical, Electronics, Computer, Instrumentation, Communication, VLSI, Environmental Engineering. M.Sc. or equivalent degree in Biotechnology, Botany, Environmental Science, Chemistry. . B.E/B.Tech./M.E./ M.Tech. or equivalent degree in Polymer, Chemical, Process Engineering. M.Sc. or equivalent degree in Zoology, Medical Science. M.Sc. or equivalent degree in Physics, Mathematics, Applied Mathematics, Chemistry, Material Science. MA ore equivalent degree in English MBA or equivalent degree in Management. B.E/B.Tech. / M.E./M,Tech. or equivalent degree in Mechanical Engineering, Material Science, Metallurgical Engineering.
RRPP02
Polymer and Process Engineering (Saharanpur Campus)
Polymer Engineering, Biopolymers, Nanopolymer, Functional Polymers, Processing Engineering, Tissue Engineering
RRPP03
Applied Science and Engineering (Saharanpur Campus)
Degradation of Materials, Microbial Corrosion, Coating, Nanomaterials, Nanoscience, Fuel Cells, Theoretical Physics, Superconductivity, Nanomagnets, Chemistry, Applied Mathematics, Industrial Mathematics, Optimization, Cloud Computing English Financial Management.
55
9. Anna University, Chennai 600025 AU

A minimum of 55% of marks/CGPA of 5.5 on a 10 point scale in post-graduate degree examination and in case of SC/ST candidates, 50% marks or CGPA of 5.0 on a 10 point scale in the post-graduate degree.
Code
Department
A.C Tech. Campus, Chennai-25
AUCH01 AULT01
Chemical Engineering Leather Technology
Petroleum Refining and Petrochemicals, Ceramic Technology, Chemical Engineering, Polymer Science and Engineering Leather technology, Footwear Science & Engineering. College of Engineering, Guindy, Chennai- 25
AUCE01
Civil Engineering Electrical Engineering Information & Communication Engineering Mechanical Engineering
Environmental Engineering, Structural Engineering, Hydrology and W ater Resources Engineering, Construction Engineering and Management, Irrigation W ater Management, Urban Engineering, Remote Sensing, Soil Mechanics and Foundation Engineering. Power Systems Engineering, Control and Instrumentation, Power Electronics and Drives, High Voltage Engineering, Electronics Engineering, Instrumentation Engineering. Optical Communication, Medical Electronics, Applied Electronics, Communication Systems, Laser and Electro Optical Engineering, Computer Science & Engineering, Software Engineering. Internal Combustion Engineering, Refrigeration and Air-conditioning, Energy Engineering, Engineering Design, CAD/CAM, Product Design and Development, Mechatronics, Automobile Engineering, CAD Madras Institute of Technology Campus, Chennai-44
AUEE01
AUIC01
AUME01
AUAE01 AUAU01 AUEC01 AUIN01 AUPT01
Aerospace Engineering Automobile Engineering Electronics Engineering Instrumentation Engineering Production Technology
Aircraft Structures, Aerodynamics, Propulsion Alternate fuels, IC combustion, Simulation of Engine, Vehicle Dynamics, Automotive Chassis Networking, Communication, VLSI, Embedded, Electronics, Avionics, Signal and Image Processing Process Modeling and Control, Fault diagnosis, VLSI, Biomedical Instrumentation, Transducers and Measurement Manufacturing Processes, Metrology, Mechatronics, Metallurgy Manufacturing Management, Robotics, Automation, Production
10. Basaveshwar Engineering College, Bagalkot 587 102 BB

Code Department Fields of specialization
Structural Engineering, Environmental Engineering Geotechnical Engineering &
BBCE01
Civil Engineering Mechanical Engineering
M.Tech/ME in Civil Engineering
BBME01
Material Science & Metallurgy, Design and Dynamics & Thermal Engineering
M.Tech in Mechanical /Automobile /Industrial & Production Engineering M.E./M.Tech in E&E / E&C /Telecommunications/ Instrumentation & Technology M.Tech/ M.E. in E&E/ E&C/ Telecommunications/ Instrumentation & Technology M.Tech/M.E. in CSE, CE, & ECE
BBEE01
Electrical Engineering Electronic & Communication Engineering Computer Science & Engineering
Renewable Energy Sources, Power Electronics & Drives, Signal Processing
BBEC01
Speech Processing, MEMS, Computer Communication & Networking Image Processing, Soft Computing, Intelligent Systems & Adhoc Networks
BBCS01
56
11. Bengal Engineering and Science University, Shibpur 711103 BE

Structural Engineering. & Concrete Technology, Soil Mechanics & Foundation Engineering, W ater Resource Engineering, Environment Engineering, Highway and Traffic Engineering Etc.
BECE01
Civil Engineering
Post Graduate Degree in the relevant field in engineering or equivalent.
12. BMS College of Engineering, Bagaluru 560 019 BS

Structural Masonry, New Generation Concrete, Alternative Building Materials and Technology, Remote Sensing and GIS, Water Resource Management, Pavement Material and Evaluation, Environmental Engineering, Fracture Behavior of Concrete, Soil Stabilization, Ground Improvement Techniques. Power Engineering, Power Distribution, Power Electronics and Drives.
BSCE01
Civil Engineering
BSEE01
BSME01
Structural Dynamics, Tribology, Solid Mechanics, Composite Materials, Structural Health Monitoring, Smart Materials and Structures, Optimization, Nontraditional Machining, Design Engineering.
BSIE01
Industrial Engineering & Management Electronic & Communication Engineering
ERP and Ergonomics, Quality and Reliability, Maintenance Engineering, Production Process.
BSEC01
Nonlinear Control Strategies, Embedded System Design, Signal Processing, Image Processing and Pattern Classification.
13. Coimbatore Institute of Technology, Coimbatore 641 014CC (Addendum)

Code Department
Civil Engineering
Will be notified later Will be notified later Will be notified later Will be notified later
Will be notified later Will be notified later Will be notified later Will be notified later
CCCE01
CCME01
Mechanical Engineering Electrical & Electronics Engineering Chemical Engineering
CCEE01
CCCH01
57
14. College of Engineering Trivandrum, Thiruvananthapuram 695 016 CT
Code
CTCE01
Department
Civil Engineering
Traffic and Transportation Structural Engineering. Engineering, Geotechnical Engineering,
CTME01
Fluid Mechanics, Heat Transfer, Thermodynamics and Combustion, Computational Fluid Dynamics, Thermal Engineering, Refrigeration and Air conditioning, Energy Management, Alternate Energy Sources and Fuels, Machine Dynamics, Condition Monitoring, Vibration, Fluid Structure Interaction, Smart/Intelligent Structures, Vibration, Machine Design, System Modeling and Simulation, System Dynamics, Optimization Techniques, Operations Management, Supply Chain Management, Financial Engineering, Ergonomics, Tribology, Wear and Lubrication
M.Tech./M.E. degree in relevant field of Engineering
CTEE01
Power Systems, Electrical Machines, Control Systems, Guidance & Navigational Control, Power Electronics & Drives.
CTEC01
RF Engineering, Signal Processing, VLSI Circuits, Motor Drives, MEMS, Image Processing, Computer Vision, Wireless Communication, Optical Communication.
15. College of Engineering, Pune 411 005 CP
Code
Department
Masters degree in Civil Construction Management, Geotechnical Engineering, Structural Engineering, Water Resources Engineering, Town and Country Planning. Master degree in Mechanical/ Automobile/ Industrial/ Production Engineering and allied specializations.
CPCE01
Civil Engineering
Construction Management, Geotechnical Engineering, Soil Liquefaction, Pavement Engineering, Ground Improvement, Laboratory and Field, Practices in Foundation Engineering, Soil, Structure Interaction; Structural Engineering, Water Resources Engineering, Town and Country Planning.
CPME01
Heat Transfer, Fluid Mechanics, I C Engines, Solar Energy, Automobile Technology, Refrigeration, air conditioning, energy management. Vibration and Acoustics, Tribology, Industrial Engineering, Micro Machining. Non-Traditional Machining, Machining, Machine Tools and Metal Cutting, Micro Machining, Casting, Welding and Forming Processes, Tool Design, Rapid Prototyping and Tooling, Modeling and Simulation of Manufacturing Processes, Manufacturing Automation and Control, Ergonomics, Intelligent Manufacturing, Cellular Manufacturing, Dimensional Tolerance Technology, CAD/CAM, Finite Element Analysis, Features Based Modeling, Computer Aided Process Planning, Intelligent Product Design and Manufacturing CIMS, Product Lifecycle Management, Quality Engineering, Planning, Scheduling, Queuing, Management of Operations, Advanced Manufacturing, Materials Processing and Heat Treatment, Metal Forming, Structural Ceramics Composite Materials, Metal Matrix Composites, Tribology of Advanced materials, Surface Engineering, Magnetic Materials, Electromagnetic Materials and Processing, Ferroelectric Ceramics, Electronics Materials, System Reliability Assessment, Maintenance Management, Machine Diagnostic and Condition Monitoring, Reliability and Design, Reliability Simulation, Machinery Fault Diagnosis, Terotechnology, Maintenance Engineering & Management, Risk and Safety Assessment, Software Reliability, Enterprise Resource Planning (ERP).
CPPE01
Production Engineering
Master degree in Production/ Mechanical/ Auto mobile/ Industrial Engineering and allied specializations.
58
Code
Department
Electrical Machines:- Permanent Magnet Machines, Linear Machines and Special Purpose Machines Power Electronics:- Topologies, Applications to Drives and Power System (FACTS/HVDC), Power Quality and Super Capacitors.
CPEE01
Masters degree in Electrical Engineering.
Control System:- Sliding Mode Control, Robust Control and Modeling of Large System. Power System:- Computation, Economics, Numerical Protection, WAMs, PMUs Technology, SMART Grid, Micro-Grid and Transients Studies. Image Processing and Pattern Recognition, Machine Vision Systems, Next Generation Networks, VLSI Architecture, Development for Signal Processing and Communication Applications, Information Security, Using Water Marking, Image Analysis for Medical/Document/ Agro Based Products/ Microstructure/ Metallographic/ Satellite Images, Speech and Audio Processing, Synthesis and Coding. Computer Networks, Information Security, Formal Methods and Verification, Bioinformatics, Machine Learning, Distributed Computing, Biometric Watermarking, Parallel Computing, Data Mining, Cloud Computing, IT enabled Business Transformations and Software Engineering. Process Control, Biomedical Instrumentation, Control System Power Converters, Agricultural Instrumentation, Sensors/ Transducers, Clinical Diagnosis/ Predictions
CPEC01
Electronic &
Telecommunication
Masters degree Electronics/ Electronics Telecommunication Engineering.
in &
CPCS01
Computer Engineering & Information Technology Instrumentation and Control
Masters degree in Computer Engineering/ Software Engineering/ Information Technology. Masters degree in Instrumentation/ Electrical/ Biomedical/ Electronics/ Computer/ Chemical Engineering. Masters degree in Metallurgy, Materials Science, Mechanical Production Engineering.
CPIN01
CPMT01
Department of Metallurgy & Materials Science
Physical Metallurgy, Process Metallurgy, Casting, Welding, Metal Working, Corrosion and Surface Modification, Heat Treatment, Cryogenic Treatment, Power Metallurgy, Ceramics, Polymers, Composite Materials; MMC, Nano Composites, Polymer Based Composites, Iron and Steel Making.
The College of Engineering Pune is affiliated to Pune University. As per the university rules, the candidate seeking admission to Ph.D course has to qualify in the entrance examination of Paper-1 and Paper-II of the University of Pune and then he/she will be eligible for selection through interview for Ph.D admission. However the candidate is exempted from qualifying entrance examination in Paper-I and Paper-II of Pune University if the candidate fulfills the following criteria. (a) Candidates having a GATGE score (b) Candidates having minimum ten years of approved teaching experience are exempted from Paper-I. Such candidates have to apply and Paper-II examination of such candidates shall be conducted by College of Engineering Pune, a day prior to the interview date. 16. Delhi Technological University, Delhi DD (Addendum)
Code Department Fields of specialization Minimum Qualification
DDCE01
Civil Engineering
Will be notified later
DDME01
Will be notified later Will be notified later
DDEE01
Electrical Engineering Polymer Science & Chemical Technology
DDPS01

59
17. Govt. College of Engineering, Aurangabad 431 005 GA (Addendum)

Code Department
Civil Engineering
GACE01
GAEE01
Electrical Engineering Electronic & Communication Engineering
GAEC01
18. Govt. Engineering College, Thrissur GK

Code
GKCE01
Department
Civil Engineering
Hydraulics & Water resources Environmental Engineering. Engineering,
GKME01
Fracture Mechanics, Structural Mechanics, Computational Mechanics, Finite Element Analysis, Stress Analysis, Manufacturing Technology & Computational Fluid Dynamics Power Electronics & Drives, Power Quality, Power Systems, Energy Management, High Voltage, Image Processing in Biomedical Applications/Control Systems, Soft Computing & Applications,
Masters in Technology / Engineering Degree in the relevant field.
GKEE01
19. Govt. College of Engineering, Salem 636 011 GC

Code
GCCE01
Department
Civil Engineering
Structural Engineering Environmental Engineering
ME/M.Tech. First Class or M.S.(by research) in the relevant branch of Engineering
GCME01
Mobile Robotics, Nano Coating/Nano Fluids, Composite Material Characterization, Alternate Refrigerants, Engine Research with Biofuels, Micro Machining, Design/Thermal Engineering
GCEE01
Electrical and Electronics Engineering including power systems Engineering, High Voltage Engineering, Power Electronics and Drives, Embedded control Systems, Control and Instrumentation, Embedded System Technologies.
20. Guru Nanak Dev Engineering College, Ludhiana 141 006 - GN

Code Department
Civil Engineering Mechanical Engineering Electrical Engineering
1. Structure Engineering, 2.Geo-Technical Engineering, 3. Transportation Engineering. 4. Computer Aided Design. 1. Thermal Engineering, 2. Industrial Engineering, 3. Production Engineering.
GNCE01
GNME01
GNEE01
1. 2.
Power Systems Operation and Control Restructuring of Power System
60
21. Indian School of Mines, Dhanbad 826004 IS

The eligibility for Ph.D Programmes is 1st class or equivalent in post-graduate degree.
Code
Department
Coal Mining, Metalliferrous Mining, Mine Planning & Design, Mine Systems Engineering, Rock Mechanics, Rock Excavation Engineering, Mine Environment, Open Cast Mining, Mine Surveying, Mine and Mineral Economics, Mine Management, Surface Environment, Marine Mining, Mine Safety Engineering.
Masters degree in Mining Engineering.
ISMI01
Mining Engineering
22. Institute of Technology, Banaras Hindu University, Varanasi 221005 VN

Minimum eligibility for Ph.D. Programme in Met. Engineering. Is Masters degree in Metallurgical or an equivalent branch of Engineering with 55% marks (or equivalent grade point average) or in Chemistry, or Physics with 60% marks for Ph.D. in Mining Engineering with 55% marks (or equivalent grade point average) or M.Sc. in Geology with 60% marks.
Code
Department
Deformation and Fracture, Phase Stability, Phase Transformations, Rapid Solidification Processing Including Metallic Glasses Nano-materials Metallurgical Thermodynamics and Kinetics, Corrosion and Environmental Stability, Metal Casting Technology and Tribological Studies, Non-Ferrous Extractive Metallurgy, Ferrous Extractive Metallurgy, Process Simulation Studies, Agglomeration of Ore Fines and Utilization of Metallurgical W astes. Rock Mechanics & Ground Control, Mine Environment, Mine Planning & Design, Mining Machinery, Numerical Modeling of Mining Structures.
VNMT01
Metallurgical Engineering
VNMI01
Mining Engineering
23. Jadavpur University, Kolkata 700032 JU

Eligibility for candidates of SC/ST/PD to Ph.D degree programme (Engineering./Tech./Arch./Pharm.) of Jadavpur University is at least "Pass Class" marks in Masters Degree in Engineering./Tech./Pharm./Arch. or equivalent.
Code
Department
Control Systems: Control and guidance, Knowledge-based systems, Artificial Intelligence, Software Engineering, Stochastic Processes, Distributed Computer Control Theory, Motion Control and Power Conditioning. Electrical Machines: System Optimization, Optimal Design of Electrical Machines, Synchronous Machines Stability, Electrical Drives, W ind Energy. Electrical Measurements: Digital and Microprocessor-based Instrumentation, Biomedical Instrumentation, Digital Signal Processing, Process Instrumentation, Fiber Optic Instrumentation. High Voltage Engineering: High Voltage Laboratory Techniques, Field Analysis and Computation, Discharge Phenomena in Gas, Liquid and Solid and Solid Media, Dielectric Engineering, Surge Analysis. Power Systems: Computer-Aided Power System Analysis Microprocessor Applications, Power Electronics, Power Systems Protection, Power System Control. Communication Engineering: Digital Communication, Data Compression, Image Processing, Fiber Optic Communication, Analog and Digital Mixed Signal Circuits and Systems.
JUEE01
JUEE02
JUEE03
Masters degree in Electrical Engineering
JUEE04
JUEE05
JUEC01
Electronics and JUEC02 Telecommunication Engineering
Computer Engineering: Programme Semantics, Compiler, Operating System, Computer Architecture, Artificial Intelligence, Pattern Recognition, Neural Networks Control Engineering: Digital Control, Robotics, Adaptive and Optimal Control, Fuzzy Control
Masters Electrical &
degree
In
Telecommunication Engineering
JUEC03
61
Code
Department
Electronic Devices: Photovoltaic Energy Conversion, Power Semiconductor Devices, Semiconductor Device Modeling, Electrical Conduction and Related Phenomena in Semiconductors and Superconductors, Microelectronics Technology, Nano Crystalline Materials and Devices, EDA, Sensors, MENS, VLSI Circuit Design and Implementation Microwave Engineering: Microwave and Millimeter W ave Antenna Theory and Technique, Microstrip Components, Antennas and Arrays, Electromagnetic Interference and Compatibility, Electrostatic Charging and Discharging. Applied Mechanics Heat Power Engineering
JUEC04 Electronics and
Telecommunication
Engineering JUEC05
JUME01 JUME02 JUME03 JUME04 JUME05 Mechanical Engineering
Fluid and Hydraulic Engineering (incl. W ater Resources) Production Engineering Machine Design (including Bioengineering) Production Technology: Machine tools and Metal cutting, Non-tradition machining, Advanced material machining, CAD/CAM, Robotics, Tribology, Computer integrated manufacturing, Flexible automation, Precision engineering, Micro machining, Ergonomics, Designing for production, Manufacturing systems simulation. Production Management: Operations management, Quantitative management, Terotechnology, Reliability, Behavioral science, Enterprise resource planning (ERP), Supply chain management (SCM), Quality engineering, W aste management.
Masters degree in Mechanical Engineering. With at least 60% marks (and also in the preceding degree).
JUPE01 Production Engineering JUPE02
Masters degree in any branch of Engineering /Technology.
24. Madan Mohan Malaviya Engineering College, Gorakhpur - 273 010 (Uttar Pradesh) MM
The minimum requirement is 60% or equivalent CPI (for SC/ST 55% or equivalent CPI) at qualifying degree.
1. Geotechnical and Geo-Environmental Engineering Ground Characterization Ground Improvement Solid Waste Management Innovative Foundations Physical Modeling 2. Hydraulics and Water Resources Engineering Fluvial Hydraulics Local Scour Scour and Scour Counter Measures Hydraulics Structures MMCE01 Civil Engineering 3. Environmental Engineering Air Pollution Noise Pollution Effluent Treatment Process and Modeling Water Characterization 4. Remote Sensing and Engineering Survey GIS and Its Application GPS and Its Application Remote Sensing 5. Structures Concrete Structures Steel Structures
62
Code
MMEE01
Department
Electrical Engineering.
Bio-instrumentation/Bio-Medical Signal Processing, Power Electronics, Electrical Machines and Drives, Power System Analysis, Restructuring and FACTS Devices, Advance Control, Process Control and Instrumentation. 1. Communication and Signal Processing Wireless Communication Computer Communication Microwave Antenna Communication Network Optical Communication Signal Processing & Coding Theory
MMEC01
2. Integrated Electronics & Circuits VLSI Design. Analog & Digital Circuits Design & Microelectronics 3. 3. Electronic System Embedded System Design Electronic Instrumentation Digital Signal Processing and Audio and Speech Processing.
1. Production & Industrial Engineering 4. Metal Cutting, Advanced Manufacturing Technology, Unconventional Manufacturing Processes, CAD/CAM/CIM, Automation, Robotics, Quality Management, Inventory Management, Supply Chain Management Operations Research, Modeling and Simulation, System Dynamics, Material Science. 2. Design Engineering Design Engineering: Stress-strain Analysis, Mathematical Modeling, CAD, and Optimization. 3. Thermal Science IC Engine, Heat and Mass transfer, Thermodynamics, Refrigeration and Air Conditioning. Turbo-Machines, Compressible flow, Automobile Engineering, Alternate Energy Resources, Emission Control, and Hydrogen Energy.
MMME01
25. Madhav Institute of Technology & Science, Gwalior 474 005 MG

Water Resources Technology & Engineering Engineering; Construction Management; Structural
M.E./M.Tech. or Equivalent degree in Civil Engineering with at least 60% marks or equivalent grade (55% marks or equivalent grade for SC/ST candidates)
MGCE01
Civil Engineering
MGEE01
Power systems; Biomedical Signal Processing; Application of AI & Soft Computing Techniques for Electrical Engineering; Condition Based Maintenance of Electrical Machines
M.E./M.Tech in Electrical Engineering with at least 60% marks or equivalent grade (55% marks or equivalent grade for SC/ST candidates)
MGCS01
Data Mining & Warehousing; Image Processing & Retrieval Techniques; Networking
M.E./M.Tech in Computer Science & Engineering or Information Technology or any other Specialization of Computer Science & Engineering and Information Technology with at least 60% marks or equivalent grade (55% marks or equivalent grade for SC/ST candidates)
MGME01
Vibration & Noise Control; Design Engineering; Maintenance Engineering Tribology; Condition Monitoring; Industrial Engineering; Supply Chain Management; Production Engineering; Material Handling; Non-Conventional Energy System.
M.E./M.Tech. in the relevant discipline with at least 60% marks or equivalent grade (55% marks or equivalent grade for SC/ST candidates).
MGAR01
Architecture
Architecture, Environmental Planning, Planning, Construction Technology.
Urban
M.Arch., M.Planning, M.E. or M.Tech. (Civil), (Master in any Architecture related subject) with at least 60% marks or equivalent grade (55% marks or equivalent grade for SC/ST candidates).
63
26.
Manipal Institute of Technology Manipal 576 104 MI

Structural Engineering BE/B.Tech. in Civil Engineering, PG in Structural/ Geotechnical Engineering with minimum 55% marks Geotechnical Engineering Civil Engineering Environmental Engineering Water Resources Engineering Earth Science
MICE01 MICE02 MICE03 MICE04 MICE05
BE/B.Tech. in Civil/Environmental Engineering, PG in Hydraulics/ Water Resources/ Environmental Engineering with minimum 55% marks M.Sc. Geology/M.Sc. Marine Geology with minimum 55% marks PG in Machine Design/Manufacturing Engineering or related streams with minimum 55% marks. PG in Manufacturing Engineering streams with minimum 55% marks. or related
MIMM01
Tribology
MIMM02
Machining of Metals & Composites
MIMM03 MIMM04 MIMM05 MIMM06
IC Engines & Combustion Mechanical and Manufacturing Engineering Solar Thermal Energy Turbomachinery Biomechanics PG in Machine Design/Biomedical Engineering or related streams with minimum 55% marks. PG in Material Science/ Metallurgy/ Manufacturing Engineering with minimum 55% marks PG in Management with minimum 55% marks. PG in Thermal Engineering or related streams with minimum 55% marks.
MIMM07 MIMM08
Corrosion Engineering Knowledge Management & System Dynamics
27. Motilal Nehru National Institute of Technology, Allahabad 211 004 MN
The minimum requirement is 60% or equivalent CPI (for SC/ST 55% or equivalent CPI) at qualifying degree.
Code Department Area of Research
Solid Mechanics, Computational Mechanics, Composite and smart structures, stability and dynamics of structures, Advanced Engineering Materials, Robotics and Mechanisms, Fluid Mechanics and Machines, Multiphase Flow, Computational Fluid Dynamics, Biomechanics and MEMS.
M.Tech or Equivalent degree Mechanical Engineering, Civil; Engineering, Metallurgical Engineering, Material Science, Applied Mechanics, Fluid Engineering, Aeronautical Engineering, Chemical Engineering, Marine Engineering, Naval Engineering, Production Engineering, Biomedical Engineering, M.Sc. of equivalent degree in Physics/Mathematics. M.Tech (Biotechnology), Bioinformatics and Biochemical Engineering, Or M.Sc. in Biotechnology or M.Sc. in Applied Biological Science Such as Microbiology, Biochemistry, Genetics, Molecular Biology, Pharmacy and Biophysics. M.Tech or Equivalent degree in Aeronautical Engineering Architectural Engineering, Civil, Chemical Engineering, M.Sc. Environmental Science or Equivalent.
MNAM01
Applied Mechanics
MNAM02
Biotechnology (Under Applied Mechanics)
Molecular Biology, Microbiology, Environmental Biotechnology, Agricultural Biotechnology, Immunology and Bioprocess development.
MNCE01
Civil Engineering
Structural Engineering, Geotechnical Engineering, Environmental Engineering, Transportation Engineering, GIS, Environmental Geo-Technology, Remote Sensing, Water Resources Engineering.
64
Code
Department
Area of Research
Data Base, Software Engineering, Mobile Computing, Parallel Computing, Computer Architecture, Computer Networking, Theoretical Computing, Computer Algorithm, Data Mining, Knowledge Based System, Real Time System, Distributed Computing. Control Systems and Mathematical Modeling, Nonlinear Systems, Model Reduction, Fuzzy Logic, Neural Networks, AI in Power System, Wireless Sensor Networks, Power Electronics, Transmission Systems & FACTs, Distribution System and Custom Power Devices, Distributed Generation & Control, Power Quality Modem Electrical Drives, Instrumentation Systems, Biomedical Instrumentation, Virtual Instrumentation, Power System Protection. Data Communication and Networking, Optical Communication, Digital Signal Processing, Image Processing, Mobile and ATM Network, Analog and Digital Circuits. Thermal Science (Heat Transfer, Energy Conversion, Refrigeration and Air Conditioning), Turbo Machines, CAD/CAM/FMS, Fatigue and Fracture Mechanics, Unconventional Manufacturing Processes, Metal Cutting, Metal Forming, Noise and Vibrations, Industrial Engineering, Rapid Prototyping and Reverse Engineering, Knowledge Management. Separation Processes, Heat Transfer, Mass Transfer Chemical Reaction Engineering, Modeling and Simulation, CFD, Energy Conversion.
M.Tech. or Equivalent degree in Computer Science & Engineering, Software Engineering, Information Technology, Electrical Engineering Electronics Engineering Electronics and Communication Engineering.
MNCS01
MNEE01
M.Tech. or Equivalent degree in Electr4ical Engineering, Electronics and Communication Engineering and Electronics Engineering.
MNEC01
M.Tech. or Equivalent degree in Electrical Engineering, Electronics Engineering, Electronics and Communication Engineering.
MNME01
M.Tech or Equivalent degree in Mechanical, Aeronautical, Automobile, Chemical, Production, Metallurgical Engineering, Industrial Engineering.
MNME02
Chemical Engineering (Under Mechanical Engineering Dept.) Centre of Energy Studies (under Mechanical Engineering Dept.)
M.Tech. or Equivalent Engineering, Petroleum Biotechnology.
degree Studies,
in Chemical Environment,
MNME03
Non-Conventional Energy Resources Management, Thermal System Design.
M.Tech. or Equivalent degree in Mechanical, Aeronautical, Automobile, Chemical, Production, Metallurgical Engineering.
MNCY01
Chemistry
Organo-Metallic Material Chemistry, Polymers, Environmental Chemistry, Nano-Technology, Nano-Chemistry, Bio-Inorganic, Photo-Chemistry, Drug Delivery, Co-ordination Chemistry
Msc. In Chemistry/ Applied Chemistry with 60% marks (55% or equivalent for SC/ST) candidates). For Interdisciplinary Field of Research Master degree in any discipline of Science with 60% marks, M.Tech. , B.Tech. 75% marks (70% or equivalent for SC/ST candidates).
MNHS01
Commonwealth Literature, Psychology; Organisational Behavior, Social Psychology; Industrial Psychology, Entrepreneurship, British Literature, American Literature, English Language Speaking and Human Resource Management, Rural Economics, Allied Social Sciences, Accounting and Financial Management. Condensed Matter Physical/Solid State Physics, Solid State Gas Sensors, Carrier Transport in Thin Films, Interface States Studies in Semiconductor Devices, Characterization of Materials, Nonlinear Dynamics, Spectroscopy of Nano-Materials and CNTs, Quantum Chemistry & Bio-Physics, Magnetic Materials, Solar Photovoltaics.
M.A. in English or Psychology/ MBA/MSW with 60% aggregate marks or equivalent CPI (%%% or equivalent for SC/ST Candidates).
MNPH01
Physics
M.Sc. Physics/M.Tech. in appropriate branch of Engineering or equivalent with 60% aggregate marks or equivalent CPI (%%% or equivalent for SC/ST candidates).
65
Code
Department
Area of Research
Master Degree in Management/ Technology/ Engineering/ Economics/ Commerce/ Science/ Computer Applications/ Social Science with minimum of 60%marks or equivalent (55% or equivalent for SC/ST candidates) or Bachelors degree in Engineering with a minimum of 75% marks or equivalent CPI (70% or equivalent for SC/ST candidates). Note: The Department will not be offering admissions under Part-time research category.
MNMG01
School of Management Studies
Marketing Human Resource, Finance, Systems Management, Strategic Management, Operations Management, International Business.
MNGI01
GIS Cell
Geoinformatics (Core and Applications)
M.Tech. or equivalent in GIS & Remote Sensing/ Civil Engineering/ Computer Science & Engineering /Information Technology/ Agricultural Engineering/ Mining Engineering or M.Sc. degree in GIS & Remote Sensing/Applied Geology/ Geophysical/Geography/ Environmental Science/ Computer Science or degree in Master of Computer Application.
Where the eligibility qualification is Masters degree in Science or Commerce or Economics or English or any subject of Humanities or Life Sciences or Management, qualifying NET is must for getting Institute Fellowship as per letter F.No. 25-2/2010-TS.II, dated 30.09.2010 and subsequent modifications which may be issued by MHRD from time to time. Important Note: Only deservice candidates with B.Tech/MCA or equivalent degree with 75% aggregate marks or equivalent (70% or equivalent for SC/ST candidates), may be considered for admission to Ph.D. programmes as mentioned above. Number of seats in each department will depend upon the availability of Supervisor in the department. Preference will be given to SC/ST candidates otherwise found eligible.
66
28. National Institute of Technology Calicut, Calicut 673 601 CL

Candidate should have M Tech Degree in the appropriate branch of study (as given in the last column) with first class or minimum 60% marks (CGPA 6.5/10). For SC/ST/PD candidates 50% minimum marks or CGPA of 5.5/10.
Code
Department
Structural Engineering;
* Minimum Qualification-Masters Degree in

Structural Engineering. Offshore Structures / Structural Engineering / Ocean Engineering / Coastal Engineering Transportation Engineering/Highway Engineering/ Traffic & Transportation Planning/Urban Engineering. Geotechnical Geotechnology Engineering / Environmental
Offshore Structures
Traffic & Transportation Planning.
CLCE01
Civil Engineering
W ater Resources Engineering
W ater Resources Geotechnology Environmental Geotechnology
Engineering/
Environmental
Engineering/
Environmental
Building Sciences
Building Technology/ Construction Engineering/ Construction and Management/Structural Engineering Town Planning /Urban Design/Architecture Electrical Engineering/ Power Systems / Energy Systems / Energetic / Industrial Power / Industrial Power & A ut om ati on / P ower Electronics / Control Systems / Instrumentation and Control Systems / Instrumentation Engineering / Applied Electronics and Instrumentation / Biomedical Engineering / Computer Controlled Industrial Power Electronics / Electronics Design & Technology / Electrical Communication / Microelectronics & VLSI Design / Electronics & Communication / Telecommunication / Signal Processing /Computer Science & Engineering / Electronics & Instrumentation/ Electrical Engineering. Industrial Engineering and Management / Industrial Engineering/ Industrial Engineering and Operations Research / Manufacturing Technology / Production Engineering Thermal Sciences/Energy Engineering Engineering & Management. / Energy
Town Planning. Instrumentation and Control Systems Power and Energy Systems CLEE01 Electrical Engineering Power Electronics & Industrial Drives Biomedical Instrumentation and Signal Processing
CLEC01
Electronics and Communication Engineering
Communication & Networking/ Signal Processing Micro electronics & VLSI
Industrial Engineering and Management
Thermal Sciences
CLME01
Manufacturing Technology
Manufacturing Technology/Production Engineering.
Energy Management
Thermal Sciences/Energy Engineering & Management
Engineering/
Energy
Materials Science and Technology
Materials Science and Technology/ Manufacturing Technology / Production Engineering
Mechanical Design
Mechanical Systems Machine Dynamics
Design / Machine
Design
67
29. National Institute of Technology Karnataka, Surathkal 575 025 SK

The relaxation is given for SC/ST candidates in the pre-qualifying degree (post graduate degree) marks/CGPA required for Ph.D. programs. They need to have a minimum of 50% marks or CGPA of 5.0 as against 55% marks and CGPA of 5.5 for general candidates.
Code
Department
Masters degree in Civil/ Marine/ Structures/ Ocean/ Offshore/ Coastal Geotechnical/Soil Mechanics/ Structural /Hydraulics/ Environmental/ Applied Mechanics/ Remote Sensing/GIS/ Geo-informatics.
SKAM01
Marine Structures/Coastal Engineering/Ocean Engineering.
SKAM02
Applied Mechanics and Hydraulics
Hydraulics Engineering Engineering
/W ater
Resources
Masters degree in Civil/ Hydraulics /W ater Water Resources/ Aerospace / Agricultural/ Ocean/ Environmental/ Coastal Engineering/ Remote Sensing/GIS.
SKAM03
Remote Sensing & GIS
Masters degree i n Civil/ H y d r a u l i c s /W ater Resources/ Aerospace/ Agricultural/ Ocean/ Environmental/ Coastal Engineering/ Remote Sensing/GIS.
SKCE01
Mechanics of Fibre Reinforced Composite Laminates; (Structural Engineering) Mathematical Modeling: Application of Analytical and Numerical Methods for Stress, Thermal, Thermo-Mechanical, Free Vibration and Stability Analysis of Laminated Composite and Sandwich Structures; Non-linear FEM Analysis: Study of Spatial Structures, Bridges, Structural Optimization, Soil-structure Interaction, Structural Dynamics. Civil Engineering
M.E./M.Tech./M.Sc.(Engineering) in Structural Engineering or related areas of any recognized Indian Universities.
SKCE02
Soil Engineering, Soil Behaviour, Soil/Ground Improvement Techniques, Earth Pressures, Anchors, Pile Foundations, Stability of Slopes, Environmental Geotechnics, Soil Dynamics, Rock Mechanics, Blasting (using both Experimental and Analytical Approaches such as FEM).
M.E./M.Tech./ M.Sc. (Engineering) in Geotechnical Engineering (Soil Mechanics and foundation Engineering) or any other related fields such as structural Engineering, Mining Engineering, Environmental Engineering, Transportation Engineering, Construction Engineering, Coastal Engineering, Soil Physics and Soil Chemistry from any recognized Indian Universities.
SKCE03
Transportation Engineering, Earthquake Engineering, Environmental Engineering.
M.E./M.Tech./M.Sc. (Engineering) in the relevant Civil Engineering disciplines or related areas of any recognized Indian Universities.
SKCH01
Process Development, Particulate System, Biotechnology, Environmental Engineering, Transfer Operations, Industrial Biotechnology
Masters Degree including Masters degree by Research from a recognized University in Chemical Engineering/ Biotechnology/ Micro-biology/ Biochemistry.
SKCS01
Computer Engineering
Software Engineering, Communication Network, Distributed Computing, W ork Flow Software, Grid Computing, Autonomic Computing, Data Mining, Data Warehouse, Security of Information, Bio-informatics, Bio- informatics
Masters Degree including Masters Degree by Research from a Recognized University; M.E./M.Tech /M.Sc. (Engineering) in Computer/ IT/E & C / Software Engineering / Networks, with B. E. / B. Tech. / B. Sc. (Engineering) in Computer/ E&C/IT/E&E
68
Code
Department
SKEC01
Electronics and Communication Engineering
Masters Degree including Masters Degree by Research from a Recognized University Masters Degree in Engineering / Technology or Masters Degree by Research in Engineering /Technology in the field of specialization Communication/VLSI Design / Signal Processing (with a CGPA of at least 5.5 in the 0-10 scale grading system or not less than 55% marks in the aggregate. In the case of SC/ST candidates these shall be a CGPA of 5.0 or 50% marks in qualifying examination Masters Degree including Masters Degree by Research from a Recognized University)
SKEE01
Electrical and Electronics Engineering
Energy Systems, Power Electronics & Drives, High Voltage Engineering, Power Systems, Control Systems, Instrumentation Engineering
Masters Degree in Electrical Engineering (with a CGPA of at least 5.5 in the 0-10 scale grading system or not less than 55% marks in the aggregate. In the case of SC/ST candidates these shall be a CGPA of 5.0 or 50% marks in qualifying examination Masters Degree including Masters Degree by Research from a recognized University)
SKHS01
Humanities
Management, Economics, English (Comparative literature) and related disciplines
Masters Degree (with a CGPA of at least 5.5 in the 010 scale grading system or not less than 55% marks in the aggregate. In the case of SC/ST candidates these shall be a CGPA of 5.0 or 50% marks in qualifying examination from recognized University)
SKME01
Alternative Fuels, Heat Transfer, Advanced Manufacturing , Mechatronics, IC Engine, Refrigeration and Air Conditioning, Fluid Dynamics, Fracture Mechanics and Fatigue, Machine Dynamics and Vibration, Advance Materials, MEMS, Robotics and Control, Stress Analysis, FEM, Renewable Energy, Tribology
M.E./M.Tech./M.Sc. (Enineering) in the relevant field (with a CGPA of at least 5.5 in the 0-10 scale grading system or not less than 55% marks in the aggregate. In the case of SC/ST candidates these shall be a CGPA of 5.0 or 50% marks in qualifying examination Masters Degree including Masters degree by Research from a recognized University)
Masters degree in Mining Engineering or other related fields such as Geo-technical Engineering, Remote Sensing/GIS, Geoinformatics, Applied Geology and Geophysics or related areas SKMI01 Mining Engineering Rock Mechanics and Ground Control, Drilling and Blasting, Mine Planning, Environmental Management (with a CGPA of at least 5.5 in the 0-10 scale grading system or not less than 55% marks in the aggregate. In the case of SC/ST candidates these shall be a CGPA of 5.0 or 50% marks in qualifying examination Masters Degree including Masters degree by Research from a recognized University)
SKMT01
Mechanical processes, Chemical processes and materials, Physical Metallurgy, Extractive Metallurgy, Foundry, W elding, Metal Forming, Corrosion, Powder Metallurgy and Transport Phenomena
M.E./M.Tech./M.Sc. (Engineering.) in the relevant field (with a CGPA of at least 5.5 in the 0-10 scale grading system or not less than 55% marks in the aggregate. In the case of SC/ST candidates these shall be a CGPA of 5.0 or 50% marks in qualifying examination Masters Degree including Masters degree by Research from a recognized University)
69
30. National Institute of Technology Rourkela, Rourkela 769008 RK

Minimum eligibility is Masters degree in Engineering Technology with at least 60% marks in aggregate.
Code
Department
B.E./ B.Tech./ M.Sc. in relevant discipline with minimum 65% marks in aggregate or 7.0CGPA. Or M.E./M.Tech. in relevant discipline with at least 60 percent marks in aggregate (or 6.5 CGPA) at both B.Tech./(or M.Sc.) and M.Tech. levels.
RKCM01
Ceramic Engineering
Ceramic Engineering
RKCH01 RKEC01
-do-
RKEC02
Electronics and Communication Engineering Electrical Engineering
Telematics & Signal Processing -doVLSI Design & Embedded System Power Control & Drives Experimental Stress Analysis Vibration Plastic Deformations of Metals Heat Transfer Cryogenics -do-
RKEE01 RKME01 RKME02 RKME03 RKME04 RKME05
Mechanical Engineering RKME06 Finite Element Techniques
M.E./M.Tech in Mechanical Engineering W ith at least 60% marks in aggregate.
RKME07
Computer Aided Design
RKME08
Computer-aided Manufacturing
RKME09
Automation & Robotics
RKMM01
Metallurgy & Materials Engineering.
M.E./M.Tech. in Material Engineering/ Science or Met. Engineering or Mechanical Engineering. or Chemical Engineering or Ceramic Engineering W ith 60% marks in aggregate.
RKMI01
Mining Engineering
Mining Engineering
B.E./ B.Tech. / M.Sc. in relevant discipline with minimum 65% marks in aggregate or 7.0CGPA. Or M.E./ M.Tech. in relevant discipline with at least 60 percent marks in aggregate (or 6.5 CGPA) at both B.Tech./(or M.Sc.) and M.Tech. levels.
70
31. National Institute of Technology, Tiruchirappali- 620 015 - TR

Minimum Qualifications: Masters Degree in Engineering / Technology in appropriate branch with first class or minimum 60% marks (CGPA 6.5) or equivalent in UG or PG. for SC/ST candidates a mere pass in UG and PG is sufficient.
Code
Department
Fields of Specialization
Power Systems, Electrical Machines and Power Electronics, VLSI, Control Systems and Computer Science.
Masters degree in Engineering/ Technology in appropriate branch with first class or minimum 60% marks (CGPA 6.5) or equivalent in UG or PG. For SC/ST candidates, a mere pass in UG and PG is sufficient. Masters degree in Engineering/ Technology in appropriate branch with first class or minimum 60% marks (CGPA 6.5) or equivalent in UG or PG. For SC/ST candidates, a mere pass in UG and PG is sufficient. Regular Admission to Ph.D. We consider M.Sc. M.Tech also.
TREE01
Electrical and Electronics Engineering
TRMT01
Metallurgical & Materials Engineering
Processing of Newer Materials, Metal Forming, Powder Metallurgy, Corrosion Engineering, W elding Engineering, Process Modeling, and Fracture Mechanics, Surface Engineering, Geo Materials, Nano Materials, Process Metallurgy, Quality management Manufacturing: Mechatronic/ Robotics, Micromachining, Surface Engineering, Tribology, Intelligent Manufacturing, Composite Materials Processing, Advanced Welding, Non-traditional machining, Rapid Manufacturing.
TRPE01
Industrial Engineering:
Simulation, Supply
Chain Management, Lean manufacturing, Quality Engineering, Project Management, Industrial Engineering Management, Data Analysis & Management, Optimization Techniques, Resource Management. Transfer Operations, Process Control, BioChemical Engineering/Bio-Technology, Reaction Engineering, Particle Technology, Energy and Environmental Engineering, Thermodynamics, Computer Aided Design, Process Systems Engineering, Energy Engineering, Electrochemical Engineering, Polymer Engineering
Masters degree in Engineering/ Technology in appropriate branch with first class or minimum 60% marks (CGPA 6.5) or equivalent in UG or PG. For SC/ST candidates, a mere pass in UG and PG is sufficient.
TRCL01
Masters degree in Engineering/Technology in appropriate branch with first class or minimum 60% marks (CGPA 6.5) or equivalent in UG or PG. For SC/ST candidates, a mere pass in UG and PG is sufficient.
TRCV01
Civil Engineering
Transportation Engineering & Management, Structural Engineering, Environmental Engineering, Geotechnical Engineering, GIS.
Masters degree in Engineering/Technology in appropriate branch with first class or minimum 60% marks (CGPA 6.5) or equivalent in UG or PG. For SC/ST candidates, a mere pass in UG and PG is sufficient. Masters degree in Engineering/Technology in appropriate branch with first class or minimum 60 % marks (CGPA 6.5) or equivalent in UG or PG. For SC/ST candidates, a mere pass in UG and PG is sufficient.
TRCS01
Computer Networks, Mobile Communication, Image Processing, Data Mining, Grid and Cloud Computing, Digital Forensics, Network Security, Wireless Network.
TRIC01
Instrumentation & Control Engineering
Mathematical Control Theory, Algorithms, Computational Complexity, Networked Control Systems, Mobile Robotics-UGVs and UAVs, Estimation Theory, Kalman Filtering, Particle Filters, PIDS and Fractional Order Controllers, MEMS, Smart Materials and Structures, Instrumentation System Design, Intelligent Control, Process Control, System Identification and Multirate Feedback Control, Biomedical Systems
Masters degree in Engineering/Technology in appropriate branch with first class or minimum 60% marks (CGPA 6.5) or equivalent in UG or PG. For SC/ST candidates, a mere pas in UG and PG is sufficient.
TRME01
Thermal Science, Machine Design
Industrial
Safety
Design,
Masters degree in Engineering/Technology in appropriate branch with first class or minimum 60% marks (CGPA6.5) or equivalent in UG or PG. for SC/ST candidates, a mere pass in UG and PG is sufficient.
71
32. National Institute of Technology Warangal, Warangal 506 004 - WR

Minimum qualification: First class Master's degree in the appropriate branch with a minimum of 60% marks in aggregate. case of SC/ST/PD Candidates, the Minimum aggregate marks is 55% In
Code
Department
Fluidization/ Modeling & Simulation/ Heat Transfer and Two- Phase Flow/ Biochemical Engineering/Non-Linear Control.
Master's degree in Chemical Engineering. or its equivalent.
WRCH01
Geotechnical Engineering.
Master's degree in Geo-technical Engineering/ Soil Mechanics or equivalent. Masters degree equivalent. in Structural Engineering or
Engineering Structures. WRCE01 Civil Engineering Transportation Engineering.
Masters degree in Transportation Highway Engineering or equivalent.
Engineering/
W ater Resources & Environmental Engineering.
Masters degree in W ater Resource Engineering/ Environmental Engineering or equivalent.
WRME01
Thermal
Engineering
Manufacturing
Engineering. /Design Engineering.
Masters degree in Mechanical Engineering in concerned specialization.
the
WRMH01
Mathematics and Humanities
Fluid Mechanics / Numerical Analysis.
M.Sc./ M.A. in Applied Mathematics / Mathematics.
33. PSG College of Technology, Coimbatore 641004 PS
Code
Department
Machine Design, Finite Element Analysis, CAD/CAM, Automobile Engineering, Composite materials, Rapid prototyping, Heat Power Engineering, Fluid Power Control & Automation, Energy Engineering, Simulation, Operations Management, Metal Forming, Casting, Welding, Injection Molding, Precision Engineering Tolerance Engineering, Computer Aided Engineering, Smart Systems, Vibration & Noise Engineering, Product Life Cycle Management, Reliability Engineering, Machine Tool Design, Safety Engineering, Innovation & Creativity, Value Engineering, Concurrent Engineering, Pneumatics, Manufacturing, Instrumentation, DFMA, TPM, Tribology, Ergonomics & Industrial Design, Refrigeration & Air Conditioning, Nano Technology. CAD/CAM, Laser Material Processing, Fluid Power Control and Automation, Industrial Engineering, Value Engineering, Systems Engineering, Total Quality Management, Agile Manufacturing, Innovative Management, Metal Forming, Concurrent Engineering, Manufacturing Systems Analysis, Virtual Manufacturing, Lean Manufacturing, Precision Manufacturing, Product Data Management, Product Life Cycle Management, Product Development, Metal Casting, Injection Moulding, Tool Design (Jigs & Fixtures), Welding.
PSME01
A Masters degree in Mechanical Engineering / Production Engineering.
PSPE01
A Masters degree in Mechanical Engineering / Production Engineering.
Management,
Metal
Forming, Concurrent
72
34. Smart Ashok Technological Institute, Vidisha SV

Building Technology & Materials, Retrofixing of Buildings, Sub Surface Technology, Transportation Engineering, Environmental Engineering, Structures, Fluid Mechanics.
Masters degree (ME/M.Tech.) in Civil Engineering with first division or equivalent.
SVCE01
Civil Engineering
SVCS01
Data Mining, Image Processing, Ad-hoc Network, Mobile Computing, Computer Network, Security.
Masters (ME/M.Tech.) in Computer Science & Engineering with first division or equivalent
SVIT01
Information Technology
Data Mining, Image Processing, Ad-hoc Network, Mobile Computing, Image Processing, Computer Network, Security.
Masters degree (ME/M.Tech.) in Computer Science, Information technology with first division or equivalent.
SVEE01
Power Electronics, Drives.
Masters degree (ME/M.Tech.) in Electrical Engineering with first division or equivalent.
SVME 01
Ergonomics, TQM, SQC, Mechatronics, Production and Operation Management, Refrigeration & Air Conditioning, Quality, Productivity, Six Sigma, SQC.
Masters degree (ME/M.Tech.) in Mechanical Engineering with first division or equivalent
35. Shri G.S. Institute of Technology & Science, Indore 452003 GS

Structural Engineering, Transportation Engineering, Environmental Engineering, Water Resource Engineering, Geotechnical Engineering, Remote Sensing
GSCE01
Civil Engineering
GSEE01
GSEC01
GSCS01
GSME01
GSIP01
Industrial & Production Engineering
73
36. Shri Guru Govind Singh Institute of Engineering & Technology, Nanded 431 606 SG
Code
SGEC01 SGEC02 SGEC03 SGEC04 Electronics & Communication Engineering
Department
VLSI and Embedded Systems Signal Processing: Speech, Biomedical Signals Image and Video Processing Pattern Recognition Measurement and Instrumentation: Industrial Instrumentation, Process Instrumentation and Control, Recent trends and Applications in Measurement and Instrumentation, Intelligent Instrumentation, Biomedical Instrumentation and Applications, Biomedical Signal Processing and Applications Advanced Sensors and MEMS Devices. Control System: Linear System Theory, Nonlinear Systems, Process Identification and Control, Robust and optimal control, sliding Mode control and Applications, Adaptive Control Computer Controlled Systems including Process Control, Large Scale System Modeling and Control, Nuclear Reactor Control, Neural and Fuzzy based Control, Intelligent Control, and Evolutionary Approaches for Control System Digital Signal and Image Processing: Signal Processing, Speech Processing, Speaker Identification and Recognition, Image Processing and Computer Vision, Biometrics and Applications, Wavelets and Applications in Real Time Processing of Signals.
M.E./M.Tech degree in relevant discipline with minimum 55% marks or equivalent CGPA.
SGIN01
SGIN02
Instrumentation & Control
ME/M.Tech or Equivalent degree in Instrumentation, Instrumentation & Control, Electrical Engineering, Electronics, Electronics & Telecommunication, Electronics & Instrumentation, Electrical & Electronics Engineering, Biomedical Instrumentation with minimum 55% marks or equivalent CGPA.
SGIN03
SGPE01
Micro-Manufacturing M.E./M.Tech. degree in Production, Mechanical or equivalent with minimum 55% marks or equivalent CGPA.
SGPE02
Advanced Manufacturing Technologies
SGPE03 Production Engineering SGPE04
Modeling and Analysis of Manufacturing Processes: Machining, Casting, Welding and Metal Forming. M.E./M.Tech. degree in Production, Mechanical or with minimum 55% marks or equivalent CGPA. M.E./M.Tech. degree in Production, Mechanical or equivalent with minimum 55% marks or equivalent CGPA. M.E./M.Tech. degree in Production, Mechanical or equivalent with minimum 55% marks or equivalent CGPA. Masters degree in Hydraulics and / or Water Resources / Environmental Engineering or equivalent degree with minimum 55% marks or equivalent CGPA. Masters degree in Hydraulics and / or Water Resources / Environmental Engineering or equivalent with minimum 55% marks or equivalent CGPA. Masters degree in Hydraulics and / or Water Resources / Environmental Engineering or equivalent degree with minimum 55% marks or equivalent CGPA.
CAE for Composites
SGPE05
Robust Design and Simulation Analysis for Products and Processes Production/ Operations Management and PLM Tool Condition Monitoring
SGPE06 SGPE07
SGCE01
Hydraulics and / Water Resources Engineering
SGCE02
Civil Engineering
SGCE03
SGCE04
74
Code
Department
Micro Manufacturing
SGME01 SGME02
Advanced Manufacturing Technologies
SGME03
Tribological Characterization M.E./ M.Tech. degree in Mechanical /
SGME04 Mechanical Engineering SGME05
Quality and Reliability Production and Operation Management
Production Engineering or equivalent with minimum 55% marks or equivalent CGPA.
Manufacturing Process Modeling and Analysis: Machining, SGME06 Casting, Welding and Metal Forming
Thermo-Structural SGME07 Composites
Analysis,
Design
and
Analysis
of
37. The National Institute of Engineering, Mysore 570 008 NM

Code Department
Civil Engineering
NMCE01
Masters degree in Civil Engineering

Masters degree in Electrical Engineering
NMEE01
Electrical Engineering Industrial Engineering Production Computer Science & Engineering
NMIE01 NMP01
A Masters degree in Mechanical/Production Engineering
A Masters degree in Mechanical/Production Engineering
NMCS01
Masters degree in Computer Science/ IS
NMIT01
Information Technology
Masters degree in Computer Science/ IS
75
38. Thiagarajar College of Engineering, Madurai 625 015 TM

Structural Engineering, Environmental Engineering, Hydrology and Water Resources Management, Geotechnical Engineering, Transportation Engineering, Pollution control, Construction materials, Repair & Rehabilitation. Power Systems, Soft computing, Renewable Energy Resources, Energy Conservation and Management, Power Electronics and Drives, Electrical Machines, Optimisation Techniques, Smart Grid, Distributed Generation Systems, Special Machines, Control Systems, FACTS deices and controllers, AI and Expert Systems Applications. Thermal Engineering, Computational Fluid Dynamics, Design Engineering, Composite Materials, Automation, CAD/CAM, CIM, Machine Vision, Mechatronics, Rapid Prototyping, Quality Engineering, Reliability Engineering, Industrial Engineering, Manufacturing Management, Logistics and Supply Chain Management, Lean/Agile Manufacturing. Wireless Communication, Digital Signal Processing, RF Circuits and Systems, Antennas., RFMEMS, Image Processing, Remote Sensing and GIS, VLSI Design, Embedded Systems, Sensors and Instrumentation, Wireless Networks, Medical Electronics. Network Security, Data Mining, Artificial Intelligence, Multicore Architecture, Parallel Processing, Computer Networks, Knowledge Engineering, Machine Learning, Software Testing, Software Quality and Reliability, Grid Computing, Internet Technology, Compliers, Multimedia, Computer Vision, Biometrics, Multimedia and Graphics, Computer Algorithms.
TMCE01
Civil Engineering
TMEE01
As per the affiliating University norms.
TMME01
M.E./ M.Tech. /M.S. (By Research) in the relevant branch of Engineering & Technology and a minimum of 55% marks or CGPA of 5.5 on a ten point scale in the qualifying exam (50% marks or CGPA of 5.0 on a ten point scale for SC/ST candidates)
TMEC01
TMCS01
39. University Visveswaraya College of Engineering, Bangaluru 560 056 - UV

Structural Engineering, Geotechnical Engineering, Environmental Engineering, Construction Technology; Highway Engineering, W ater Resources Engineering, Prestressed Concrete.
A master degree in Civil Engineering or any of the branches of Civil Engineering or equivalent fields with minimum 60% marks.
UVCE01
Civil Engineering
40. Veer Surendra Sai University of Technology, Burla VB

Code
VBCE01
Department
Civil Engineering Electrical Engineering Electronics & Communication Engineering Mechanical Engineering Production Engineering
Geotechnical Engineering, Structural Engineering, Water Resources Engineering, Environmental Engineering. Power System Engineering, Power System & Devices, Control System Engineering Signal Processing, Image Processing, Electromagnetics & Microstrip Antena, Computational Intelligence. Machine Design & Analysis, Production Engineering, Thermal Engineering. Robotics, Systems. Non-Traditional Machining, Manufacturing
VBEE01
VBEC01
M.E./M.Tech with minimum of 6.75 CGPA in 10 point scale (or 60% or more in aggregate) in Masters level and minimum of 6.75 CGPA (or 60% mark in aggregate) at the Bachelors level.
VBME01
VBPE01
76
41. Visvesvaraya National Institute of Technology, Nagpur 440 011 - VR
Code
Department
Power system
Stability/ Operation /Protection, Power
First Class Master' degree in Electrical Engineering (Power Systems / Power
VREE01
Electronics, HVDC/ FACTS, Electric Drives
Electronics / Electric Drives / Control and Instrumentation)
1. Alloy Development 2. Corrosion & High temperature oxidation 3. Development of: VRMT01 Metallurgical Engineering a) Ceramic & glasses b) Polymeric materials c) Composites 4. Fatigue and fracture behaviour of materials 5. High temperature deformation. 6. W ear behaviour of engineering materials 7. W elding metallurgy M.Tech./ M.E. (Metallurgical Engineering. OR Materials Science & Engineering OR Mechanical Engineering) Engineering OR Polymer
42. Walchand College of Engineering, Sangli 416 415 WS
Code
Department
Civil Environmental Engineering: Water and Wastewater Treatment, Modeling of
WSCE01
Civil Engineering
Environmental Systems, Solid Waste Management, Air Pollution, Constructed Wetlands Building Materials and Technologies, Energy Efficiency in Building, Structural Engineering, Earthquake,, Heat Power, Thermal Engineering, Cryogenics, Production
WSME01
Engineering
Mechatronics,
Micromachining,
Manufacturing, Design Engineering, Condition Monitoring As per Shivaji University Kolhapur Norms WSEE01 Electrical Engineering HV Processing, Control Systems/Power Systems, Power Electronics, Electrical Drives, Electrical Machines, Power Electronics. Signal Processing, Communication Engineering, VLSI WSEC01 Electronics & Communication Engineering Design, Image Processing, Electronic System Design, Control Systems, Communication Engineering, Electronic System Design, Image Processing Mobile Communication, Sensor Networks, Image Processing. Artificial Intelligence, Pattern Recognition, Databases, Data Mining, Networking, Image Processing, Information Security, High Performance Computing, Cloud Computing.
Computer Science WSCS01 & Engineering
77
43. S.V. National Institute of Technology, Surat - 395 007 - SS

Code Department Fields of specialization Minimum Qualification
Masters degree engineering in relevant area of
SSCE01
Civil Engineering
Environmental Engineering, Water Resources Engineering, Urban Planning, Transportation Engineering and Planning
Admission as per the norms available on the institutes website: www.svnit.ac.in Masters degree in engineering with specialization in Thermal and Fluid Engineering/Manufacturingnorms Industrial Admission as per the and Engineering/Design and Dynamics/Robotics available on the institutes website: and Mechatronics/ Energy Systems Engineering /Automobile Engineering www.svnit.ac.in /Aeronautical Engineering/Cryogenics/ CAD/ CAM/ CIM/ Production/ Tribology/ Turbo Machines Admission as per the norms available on the Masters degree in relevant area of institutes website: www.svnit.ac.in engineering per the norms available on the Admission as institutes website: the norms available on the Admission as per www.svnit.ac.in institutes website: www.svnit.ac.in
SSME01
Design and Dynamics, Thermal and Fluid Engineering, Manufacturing and Industrial Engineering
SSEE01
Power Electronics & Electrical Drives, Electrical Power Systems, Control and Instrumentation, Energy Systems
Communication and Networking: Wireless mobile communication, CDMA, multiuser detection, , MIMO, OFDM, cooperative communications. Communication networking: modeling, analysis, optimization and control of resource allocation in wireline and wireless networks; scheduling in networks; quality of service in heterogeneous networks; cross-layer design in wireless networks; energy efficient protocols. Wireless sensor networks: Self organization, and distributed signal processing, system architectures for various applications, distributed computing algorithms for sensor networks. Communication protocols-specification and verification, AI applications to communication networks and their management, mobile agents. Multimedia communication. Photonics: Fibre Optics communication, DWDM networks, Integrated optics, MOEMS; Fiber Bragg grating Sensors, Bio Photonics and bio sensors. Signal Processing: Wavelets: application to data transmission, signal detection and denoising. Multirate signal processing, filter bank design. Statistical signal processing; signal detection and estimation, Biomedical signal processing. Processing of biomedical signals using nonlinear dynamical techniques. Abnormality detection in ECG and EEG signals. Connectivity study of networks in the brain. Information Security and Privacy, Software Requirements Specification using Ontologies. Computer Vision/Image Processing Machine Learning/Soft Computing Wireless Network Automata/Compiler Catalysis in refining & petrochemicals processes, Catalysis in biomass conversions, Biofuels, Nanofuels, Wastewater treatments, Membrane separations, Metal recovery methods, Applications of ionic liquids, Green chemistry, Multiphase flow, Syntheses and applications of metal/ metal oxide nanoparticles, Crystallization processes, Energy and environment management, CFD in Chemical Engineering, Polymer nanotechnology and polymer nanocomposites. Masters degree in Computer Engineering or allied fields Admission as per the norms available on the institutes website: www.svnit.ac.in
SSEC01
Electronic & Communication Engineering
ME/M.Tech. or equivalent degree in Electronics and Communication, Telecommunication, Electronics, Biomedical Engineering Admission as per the norms available on the institutes website: www.svnit.ac.in
SSCS01
SSCH01
Masters degree in Chemical Engineering or allied fields Admission as per the norms available on the institutes website: www.svnit.ac.in
78
44. Malaviya National Institute of Technology, Jaipur - 302 017 - MJ (Addendum)

Code
MJCH01
Department
Will be notified later Will be notified later Will be notified later Will be notified later Will be notified later Will be notified later Will be notified later
Will be notified later Will be notified later Will be notified later Will be notified later Will be notified later Will be notified later Will be notified later
MJCE01
Civil Engineering Electrical Engineering Mechanical Engineering Metallurgical & Materials Electronics & Communication Engineering Computer Engineering
MJEE01
MJME01
MJMM01
MJEC01
MJCS01
45. National Institute of Technology, Durgapur (West Bengal) - 713 209 - ND (Addendum)
Code
NDBT01
Department
Biotechnology Chemical Engineering Civil Engineering Computer Science & Engineering Electronics & Communication Engineering Electrical Engineering
Will be notified later Will be notified later Will be notified later Will be notified later Will be notified later Will be notified later Will be notified later Will be notified later
Will be notified later Will be notified later Will be notified later Will be notified later Will be notified later Will be notified later Will be notified later Will be notified later
NDCH01
NDCE01
NDCS01
NDEC01
NDEE01
NDME01
Mechanical Engineering Metallurgical & Materials Engineering
NDMT01
79
46. National Institute of Technology, Silchar (Assam) 788010 - NS (Addendum)

Code Department
Civil Engineering Mechanical Engineering
NSCE01
Will be notified later Will be notified later Will be notified later
NSME01
NSCS01
NSEE01
Electrical Engineering Electronic & Communication Engineering
NSEC01
47. National Institute of Technology, Agartala (Tripura) 799055 - NA (Addendum)

Code Department
NAME01
NAEC01
NAEE01
NAPE01
NACE01
Civil Engineering
48. PDPM Indian Institute of Information Technology Design & Manufacturing, Jabalpur (M.P) - 482 005 - PD (Addendum)
Code Department
Computer Science & Engineering Electronics & Communication Engineering
PDCS01
PDEC01
PDME01
80
49. Rajiv Gandhi Institute of Technology, Govt. Engineering College, Kottayam (Kerala) 686 501 RG (Addendum)
Code
RGEE01
Department
RGME01
RGCE01
Civil Engineering
50. Giani Zail Singh College of Engineering & Technology, Bathinda (Punjab) - 151 001 GZ (Addendum)
Code Department
Computer Science & Engineering Mechanical Engineering
GZCS01
GZME01
GZEE01
GZCE01
Civil Engineering
GZTX01
Textile Engineering
51. Government College of Engineering, Amravati (Maharashtra) - 444 604 AM (Addendum)

Code
AMEE01
Department
AMME01
AMCE01
Civil Engineering
81
52. Netaji Subhas Institute of Technology, New Delhi - 110 078 - NN

Code Department Fields of specialization: include, but are not restricted to, the following:
Analog Integrated Circuits and Signal processing; Bipolar/CMOS/Bi-CMOS Analog Circuits, Analog VLSI, Low-power, low-voltage analog Circuit Design,, Electromagnetics, Optical Networks and Optical Communication, Wireless Communication, Digital Signal Processing (DSP), Statistical Signal Processing, VLSI DSP. Information Retrieval, Data Mining, Soft Computing, Software Engineering, Reconfigurable Computing, Computer Architectures, Machine Learning, Internet and Web Technologies, Software Testing, Mobile Computing, Image Processing, Database, CAD of Embedded Systems, Parallel processing, Adaptive Systems, Distributed Computing, Multi-disciplinary applications Software Engineering, Software Testing, Data Warehouse, ADHOC Networks, Network Security, Opportunistic Networks. Power Electronics, Industrial Drives, Intelligent Instruments, Artificial Intelligence, Intelligent Control, Intelligent Modeling of Non-Linear Systems, Biometrics & Bioinformatics, Intelligent instrumentation, Intelligent Control of Shaker System, FPGA applications in Instrumentation, Distillation Process, Image Processing, Biomedical Instrumentation, Electrical Drives, Power Quality, AI Based Control Teaching, FACTS, DSP-based control of Machines, Renewable energy systems, Process Dynamics, V Control, Intelligent Process Control, Robotics, Intelligent Control Systems, VLSI. Manufacturing, CAD/CAM, Product Design, Unconventional Machining Methods ECDM/ECM/DEM/USM etc, Super abrasive grinding Technology, Artificial Intelligence, Robotics Management, and Product Design.
Masters degree in Engineering /Technology in Electronics Engineering/Electronics and Communication Engineering/Electronics and Telecommunication Engineering, securing 60% or more marks in aggregate (as per ordinance VI-B of University of Delhi).
NNEC01
NNCS01
Masters degree in Engineering /Technology in Computer Engineering/Computer Science, securing 60% or more marks in aggregate (as per ordinance VI-B of University of Delhi).
NNIC01
Instrumentation & Control
Masters degree in Engineering /Technology in Instrumentation and Control Engineering/ Electrical Engineering, securing 60% or more marks in aggregate (as per ordinance VI-B of University of Delhi).
NNMP01
Manufacturing Process & Automation
Masters degree in Engineering /Technology in Manufacturing and Automation Engineering/ Mechanical Engineering, securing 60% or more marks in aggregate (as per ordinance VI-B of University of Delhi). Masters degree in Engineering /Technology in Biotechnology or Master of Science in allied subjects such as Microbiology, Biochemistry, Genetics, Molecular Biology, Pharmacy and Biophysics, securing 60% or more marks in aggregate (as per ordinance VI-B of University of Delhi).
NNBT01
Biotechnology
Industrial Enzymes, Bio-energy, Bio-remediation & Novel Antimicrobial agents/anticancer agents, Computational and Structural Biology with emphasis on molecular modeling and drug design.
53. Kamla Nehru Institute of Technology, Sultanpur (Uttar Pradesh) - 228 118 - KS
Code
KSEE01
Department
Power Electronics and Drives
M.Tech in Electrical Engineering
82
54. Pondicherry Engineering College, Puducherry - 605 014 PY (Addendum)

Code
PYEC01
Department
Electronics & Communication Engineering Computer Science & Engineering
PYCS01
PYEE01
PYME01
PYCE01
Civil Engineering
55. Sardar Patel College of Engineering, Mumbai (Maharashtra) - 400 058 SM (Addendum)
Code
SMCE01
Department
Civil Engineering
56. Veermata Jijabai Technological Institute (VJTI), Mumbai (Maharashtra) - 148 106 - VM (Addendum)
Code
VMCE01
Department
Civil Engineering
VMEE01
VMME01
VMEC01
Electronics Engineering
VMTX01
Textile Technology
83
57. Sant Longowal Institute of Engineering & Technology (Deemed University), Punjab - 148 106 SP (Addendum)
Code
SPME01
Department
SPFE01
Food Engineering Technology
SPEI01
Electronics & Instrumentation Engineering Chemical Technology
SPCT01
58. Indira Gandhi Institute of Technology, Sarang, (Odisha) - 759 146 IO

Code Department
1. 2. 3. 4. 5. 1. 2. 3. 4.
Structural Engineering Geotechnical Engineering Environmental Engineering Transportation Engineering Hydraulics Engineering Machine Design Production Engineering Thermal Engineering Industrial Engineering
B.E/ B.Tech & M.E/ M.Tech in Civil Engineering with minimum 60% or equivalent either at Graduation or Postgraduation level.
IOCE01
Civil Engineering
IOME01
B.E/ B.Tech & M.E/ M.Tech. in Mechanical/ Production Engineering with minimum 60% or equivalent either at Graduation or Postgraduation level B.E/ B.Tech & M.E/ M.Tech. in Electrical Engineering with minimum 60% or equivalent either at Graduation or Postgraduation level
IOEE01
1. Power Electronics & Drives 2. Power Systems 3. Signal Processing & Image Processing
59. Harcourt Butler Technological Institute, Kanpur (Uttar Pradesh) - 208 002 HK (Addendum)
Code
HKCE01
Department
Civil Engineering
HKME01
HKEC01
Electronics & Communication Engineering Chemical Engineering
HKCH01
84
60. TKM College of Engineering, Kollam (Kerala) - 691 005 TK

Code Department
1. TKCE01 Civil Engineering 2. 3. 4.
Structural Engineering Offshore & Coastal Engineering Transportation Engineering Environmental Engineering
M.Tech in the Related fields of Civil Engineering
1. 2. 3. TKME01 Mechanical Engineering 4. 5. 6. 7. 8.
Manufacturing Engineering CFD, Heat Transfer Nano Fluids/ Refrigents Fracture Mechanics Cryogenics Vibration Biomechanics Composites M.Tech in the Related fields of Mechanical Engineering
85
QUALITY IMPROVEMENT PROGRAMME Application for Advance Admission to Ph.D. Degree Programme 2011-2012 Copy to Principal Coordinator
Specimen Application and NOT to be used for filling application
1. Application Number 2. Name 3. Designation 4. Department 5. College Address : : : : : Stamp Size Phot o
6. Contact Address
7. Phone (Office) 9. Phone (Residence) 11. Date of Birth 13. Category 15. Physically Disabled 16. UG Degree Year Class/Division 17. UG Degree Year Class/Division
: : : : : : : : : : : University University Yes/No
8. Mobile : 10. Email : 12. Gender: 14. Married:
: :
Overall Percentage/CGPA
: : :
Overall Percentage/CGPA
18. Teaching Experience as on September 30, 2012 (Sunday) 19. Industrial / Research Experience as on September 30, 2012 (Sunday): 20. Number of QIP/ISTE/AICTE/IMPACT Courses Attended a) 4 to 8 days Duration: b) Two weeks Duration:
c) More than 2 weeks:
21. Number of Research Papers: a) In Refereed journals:
b) In Conference Proceedings:
85
22. Institutions and Departments to which Admissions are sought Name of the Institute Preference 1 Preference 2 Preference 3 23. Academic Data (Examination Passed B.E/B.Tech/B.Arch/B.Sc(Engg)/Equivalent)
Semester/Year University Year Specialisation Class Marks Obtaine d Percentage GPA
Choice of Specialisation First Choice Second Choice
24. Academic Data (Examination Passed M.E/M.Tech or Equivalent)

Semester/Year University Year Specialisation Class Marks Obtaine d Percentage GPA
25. Any other Qualification

Degree University Year Specialisation Class Marks Obtaine d Percentage GPA
26. Teaching Experience at Degree Level as on September 30, 2012 (Sunday)

Sl.No Name and Address of Employer & Institution From (Date) To (Date) Years-Months Designation
27. Industrial/Research Experience as on September 30, 2012 (Sunday)

Sl.No Name of the Organisation From (Date) To (Date) Years-Months Designation
28. Short Term Courses

Sl.No Name of the Course & Category Organizer Days From T o
29. Research Papers/Book

Sl.No Title of Paper/Book Name of Author(s) Name of Journal/Conference Year Vol. Pages
86
Declaration a. I declare that all the information given by me in this application form is correct to the best of my knowledge and belief, and I understand that false or incomplete information would cause invalidation of the application. b. I shall abide by the decision of the National QIP Coordination Committee in all matters pertaining to admissions. The decision of the Committee shall be final and binding on me.
c. I shall abide by the rules and regulations of the Institutions to which I will be offered admission, if selected. d. For all legal actions, suits and proceedings, the jurisdiction of a court of law shall be deemed to lie exclusively at the place at which the Institution considering me for admission is situated or the place where the office of the Principal Coordinator QIP is located and at no other court of place.
e. I understand the contents of this form and, particularly, this declaration being made here.
Place: Date :
Signature of the Applicant
Certificate and Forwarding Note by the Principal/Head of the Institution a) Our Institution as well as the academic department, to which the applicant Mr/Ms------------------------------------------------------------------------------------------------------belongs, is approved by AICTE (Not applicable, if the candidate belongs to a National Institute of Technology (NIT) or National Institute of Technical Teachers Training & Research (NITTTR)) b) The applicant is a full-time regular / permanent faculty member of our Institution and is not on deputation to any other Institution. c) The applicant has _ years and months of teaching experience as on September 30, 2012 (Sunday) at the graduate level (Certificates enclosed) d) The applicant will be relieved full-time for the programme on deputation and will be paid full salary and allowances during the tenure of his/her sponsorship, if selected for admission.
Office Seal:
Signature of Principal or Head of Institution (with full contact details)
Date:
Note: Conditional Recommendation will not be accepted.

This Forwarding Note should be signed only by the Principal or the Head of the Institution. Any alteration made in the text of this Forwarding Note leads to automatic rejection of the application.
Please attach separate experience certificate.
87
For any further details please contact the zonal QIP coordinators at address indicated below:
Prof. P. Venkataram Chairman, CCE & Principal Coordinator QIP Indian Institute of Science, Bangalore BANGALORE 560 012 Tel : 080 23600911 / 23608150 22932491 / 22932247 Fax : 080 23600911 / 23608150 Email : chairman@cce.iisc.ernet.in office@cce.iisc.ernet.in
Prof. B Bandopadhyay Professor-in-Charge, CE & QIP Indian Institute of Technology Bombay MUMBAI 400 076 Tel : 022-2572 2545 Extn : 022-7048. 7060 Fax : 022-25723480 Email : qip@iitb.ac.in bijnan@sc.iitb.ac.in
Prof. S V Veeravalli Coordinator QIP, CEP QIP/CEP OFFICE, 1ST Floor,, Wing-B, Vishwakarma Bhawan Indian Institute of Technology Delhi Hauz Khas, Sheed Jeet Singh Marg, NEW DELHI 110 016 Tel : 011 26591915 / 26591343/26597118 Fax : 011 - 26581069 Email : qipcep@admin.iitd.ac.in
Prof. Pradeep Yammiavar Head, CET & QIP Coordinator Indian Institute of Technology Guwahati GUWAHATI 781 039 Tel : 0361 2583025 / 2583001 2691174 / 2582667 Fax : 0361 2583020 / 2690762 Email : qip@iitg.ernet.in
Prof. M.K.Harbola Head, QIP, CEC, CDC Indian Institute of Technology Kanpur Kalyanpur KANPUR 208 016 Tel : 0512 2597795 / 2597893 / 2597823 Fax : 0512 2597795 Email : mkh@iitk.ac.in
Prof. Somnath Sengupta Dean, CE & QIP Coordinator Indian Institute of Technology Kharagpur, KHARAGPUR 721 302 Tel : 03222 282033 / 283510 / 282111 Fax : 03222 255303 / 282033 / 220508 Email : deance@hijli.iitkgp.ernet.in
Prof. Ajit Kumar Kolar Chairman, CCE & QIP Coordinator Indian Institute of Technology Madras CHENNAI 600 036 Tel : 044 22574900 / 22574901 / 22574265 Fax : 044 22574920 / 22570509 Email : chaircce@iitm.ac.in
Prof. Rama Bhargava Coordinator Quality Improvement Programme Centre Indian Institute of Technology Roorkee ROORKEE 247667 (Uttarakhand) Tel : 01332 285241 / 285247 Fax : 01332 286691 Email : qip.iitr@gmail.com
rbhafma@iitr.ernet.in qip@iitr.ernet.in

Qip Brochure PHD - 2012 PDF

Uploaded by

Copyright:

Available Formats

Qip Brochure PHD - 2012 PDF

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Qip Brochure PHD - 2012 PDF

Uploaded by

Copyright:

Available Formats

QIP

QUALITY IMPROVEMENT PROGRAMME

Advance Admission to Ph.D. Programmes

All India Council for Technical Education

28th Sept 2012

31st Oct 2012

09th Nov 2012

Dear Prospective QIP Scholar

Principal Coordinator QIP, Centre for Continuing Education, IISc Bangalore.

Sl. No. 19.

Sl. No. 33.

Sardar Patel College of Engineering, Mumbai - 400 058

Institution(s) Offering Ph.D. Degree Programme

Electrical & Electronics Engineering Educational Technology Electrical Communication Engineering

Institution(s) Offering Ph.D. Degree Programme

Institution(s) Offering Ph.D. Degree Programme

DL DD CP, JU*, NA, NM, PS, SG,TR, VB AU RR KH KH KH DL KH BM, MN BG BG BM GZ DL, VM RR

IV. ELIGIBILITY CRITERIA

VIII. INSTRUCTIONS FOR COMPLETING THE ON-LINE PPLICATION General Instructions

Designation Assistant Lecturer Associate Lecturer Lecturer

Designation Senior Lecturer Reader Assistant Professor

Designation Associate Professor Professor Other Designation

Educational Qualifications and Academic Data

Institute and Department Preferences

Final Confirmations and Printouts

No. of Institutions Chosen

No. of applications to be printed and No. of sets of enclosures required

IX. APPLICATION FEE

X. CHECKLIST FOR EACH COPY OF THE APPLICATION FORM

XI. INSTRUCTIONS FOR DESPATCHING

Indian School of Mines, Dhanbad

XV. DEPARTMENTS & FIELDS OF SPECIALIZATION AT VARIOUS INSTITUTIONS

Indian Institute of Science, Bangalore 560 012 BG

Centre for Atmospheric & Oceanic Sciences

BGCH01 Chemical Engineering

ME/M.Tech. or equivalent degree.

Civil Engineering BGCE02

Computer Science and Automation

Electrical Communication Engineering

Electronic Systems Engineering

ME / M.Tech. or equivalent degree with Electronics as one of the subjects of study.

Instrumentation and Applied Physics

Materials Research Centre

ME / M.Tech. or equivalent degree or M.Des in Product Design & Manufacturing or equivalent.

Super Computer Education and Research Centre

ME/M.Tech. or equivalent degree in any discipline

Centre for Sustainable Technologies

Indian Institute of Technology Bombay, Mumbai 400076 BM

Aerodynamics Dynamics and Control Aerospace Propulsion Aerospace Structures

iii. BMCH01 Chemical Engineering

Computer Science and Engineering

M.Sc / M.Tech degree in Geology/ Geophysics / Geo-Chemistry

First Class Master degree in Maths/ Statistics/ Computer Science

Metallurgical Engineering and Materials Science

Physics BMPH04 BMPH05 BMPH06

Humanities and Social Science

Bioscience & Bioengineering

Environmental Science and Engineering