Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 178 views

    5032-6 Fixed Inductors PDF

    Uploaded by

    Robert Nixon
    Angus Fire Fixed In-line Inductors are designed for use in fixed foam proportioning systems. They are available in six models to handle flows from 65 to 4000 liters per minute at pressures from 4 to 16 bar and can accurately induce foam concentrate from 1% to 6%. Manufactured from corrosion resistant materials, each inductor is calibrated to the specific system parameters to ensure proper performance. Approval listings from Underwriters Laboratories and Lloyd's Register are provided.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    5032-6 Fixed Inductors PDF

    Uploaded by

    Robert Nixon
    178 views2 pages
    Angus Fire Fixed In-line Inductors are designed for use in fixed foam proportioning systems. They are available in six models to handle flows from 65 to 4000 liters per minute at pressures from 4 to 16 bar and can accurately induce foam concentrate from 1% to 6%. Manufactured from corrosion resistant materials, each inductor is calibrated to the specific system parameters to ensure proper performance. Approval listings from Underwriters Laboratories and Lloyd's Register are provided.

    Original Description:

    Inductor

    Original Title

    5032-6 Fixed Inductors.pdf

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Angus Fire Fixed In-line Inductors are designed for use in fixed foam proportioning systems. They are available in six models to handle flows from 65 to 4000 liters per minute at pressures from 4 to 16 bar and can accurately induce foam concentrate from 1% to 6%. Manufactured from corrosion resistant materials, each inductor is calibrated to the specific system parameters to ensure proper performance. Approval listings from Underwriters Laboratories and Lloyd's Register are provided.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    178 views2 pages

    5032-6 Fixed Inductors PDF

    Uploaded by

    Robert Nixon
    Angus Fire Fixed In-line Inductors are designed for use in fixed foam proportioning systems. They are available in six models to handle flows from 65 to 4000 liters per minute at pressures from 4 to 16 bar and can accurately induce foam concentrate from 1% to 6%. Manufactured from corrosion resistant materials, each inductor is calibrated to the specific system parameters to ensure proper performance. Approval listings from Underwriters Laboratories and Lloyd's Register are provided.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    www.angusfire.co.

    uk

    Fixed In-line Inductors

    Angus Fire Fixed In-line Inductors are designed primarily for use in fixed installations and provide a simple and reliable method of proportioning foam concentrate in constant flow applications. The range comprises six basic models and performance extends from 65 to 4000 litres per minute at inlet pressures of between 4 and 16 bar as shown overleaf. Within these limits, the induction rate can be set accurately between 1% and 6%. Manufactured from high grade stainless steel with mild steel flanges and polyester internals, the units have exceptional corrosion resistance and are suitable for use in the most extreme environments. Each inductor is accurately calibrated at the factory to match the specific requirements of the system into which it is to be installed. To ensure that the correct performance is achieved, the following parameters must be defined at the order stage: (a) Required foam solution flow. (b) Inductor input pressure. (c) Foam type, percentage concentration and ambient temperature. (d) Non-return valve fitted or not. (e) Maximum suction lift. (f) Suction pipe length and internal diameter.

    APPROVALS Underwriters Laboratories Inc. :

    IND25/FI IND40/FI IND65/FI IND80/FI IND100/FI All Models All Models

    Lloyds Register UK Maritime & Coastguard Agency:

    MODELS IND25, 40, 50 & 65/FI

    ref: 5032/6/10.07 page: 1 of 2

    Lloyds Register

    Fixed In-Line Inductors

    These graphs are for guidance only. Before final selection of inductor size the system parameters a-f overleaf should be verified by our computer program (especially where foam pick up heights exceed 2 metres and induction rates of 6% are required). Up to 65% of the inlet pressure at the inductor (within the limits shown above) is available to power foam generating equipment, to overcome pipework friction losses and/or to overcome static head. Provided the backpressure caused by the system configuration downstream from the inductor does not exceed this, foam induction accuracy will be maintained. To ensure accurate proportioning, the suction lift and foam pick-up pipe length should be minimised and the water supply pipe diameter should not be less than that of the inductor. The flow characteristics of a non-return valve fitted to the foam pick-up pipe have to be allowed for when calibrating the inductor and when required, the unit must be supplied by Angus. If a non-return valve is not used, it is recommended that a full bore on/off valve is fitted.
    IND25/F1 A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) CONNECTION FOAM INLET MATERIALS FINISH APPROX. WEIGHT 0.32 kg 0.77 kg 100 50 45 1 NPT (M) NPT (M) IND40/F1 160 70 48 1 NPT (M) NPT (M) IND50/F1 320 70 50 2 NPT (M) NPT (M) IND65/F1 365 85 67 2 NPT (M) 1 NPT (M) IND80/F1 100 80 185 470 (max) 63 Flange ANSI 3 RF #150 1 NPT (M) IND100/F1 125 91 220 550 (max) 81 Flange ANSI 4 RF #150 1 NPT (M)

    316 Stainless Steel with Polyester internal fittings Natural 1.78 kg 3.10 kg

    316 Stainless Steel with Polyester internal fittings & mild steel flanges Yellow thermoplastic powder finish 8.50 kg 16.50 kg

    ref: 5032/6/10.07 page: 2 of 2


    THAME PARK ROAD, THAME, OXFORDSHIRE, OX9 3RT, ENGLAND
    Tel: +44 (0)1844 265000 Fax: +44 (0)1844 265156 e-mail: general.enquiries@kiddeuk.co.uk

    You might also like