Professional Documents
Culture Documents
S 28AT XP EXP Eng
S 28AT XP EXP Eng
28AT/28XP/28EXP
Product Description
Type 28 compressor dry-running gas seals have been the industry standard since the 1970s for gas-handling turbomachinery. Utilizing John Crane's patented spiral groove pattern, these seals are non-contacting in operation.
I I
Design Features
Shrouded mating ring prevents secondary damage in the event of a mating ring fracture Low-level leakage can be vented to a safe area, used as fuel to drive equipment, or returned to process via a low-pressure ejector
During dynamic operation, the mating ring/seat and primary ring/face maintain a sealing gap of approximately 0.0002 in./5 microns, thereby eliminating wear These seals eliminate seal oil contamination and reduce maintenance costs and downtime Single, double opposed, and tandem cartridge seals are capable of handling a wide variety of gas sealing applications in the gas collection/transmission, refining, chemical and petrochemical processing industries
I
Performance Capabilities
Temperature: Pressure: Speed: Shaft: -220F to 600F/-140C to 315C Up to 6,500 psig/450 bar g across single stage Up to 660 fps/200 m/s Up to 13.75"/350mm
I
28AT/28XP/28EXP
Interstage Labyrinth
28AT/28XP/28EXP
Interstage Labyrinth
SEAL (OR PROCESS) GAS BEARING CAVITY Seal (or Process) Gas Labyrinth Separation Seal - contact John Crane for options
28AT/28XP/28EXP
3 2 5000 RPM 1 0 2.187 50 3.187 4.187 100 5.187 6.125 150 Seal Size 7.125 8.125 200 9.125 10.125 250
75 50 25 0
(inch) (mm)
Leakage (sl/min)
Leakage (SCFM)
100
10000 rpm; 1.000 psig/69 bar g 10000 rpm; 100 psig/7 bar g 5000 rpm; 100 psig/7 bar g
*This information should not be used for specification purposes. Contact DryGasSeals@johncrane.com for more information about exact application requirements.
*Single Seal Arrangement for applications not requiring a safety back-up seal.
*Double Seal Arrangement where hazardous gas is not permissible to leak into atmosphere.
For your nearest John Crane facility, please contact one of the locations below. North America Global Headquarters Morton Grove, IL, USA 1-800-SEALING Tel: 1-847-967-2400 Fax: 1-847-967-3915 Europe Slough, UK Tel: 44-1753-224000 Fax: 44-1753-224224 Latin America So Paulo, Brazil Tel: 55-11-3371-2500 Fax: 55-11-3371-2599 Middle East & Africa Dubai, United Arab Emirates Tel: 971-481-27800 Fax: 971-488-62830 Asia Pacific Singapore Tel: 65-6518-1800 Fax: 65-6518-1803
If the products featured will be used in a potentially dangerous and/or hazardous process, your John Crane representative should be consulted prior to their selection and use. In the interest of continuous development, John Crane Companies reserve the right to alter designs and specifications without prior notice. It is dangerous to smoke while handling products made from PTFE. Old and new PTFE products must not be incinerated. ISO 9001 and ISO 14001 Certified, details available on request. 2012 John Crane Print 12/12 [F] Revised 12/12 www.johncrane.com www.johncranetoday.com S-28AT/XP/EXP/Eng