Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
446 views

Simple Column Design Example

EN 1993-1-1 Laurent Narboux Charles King Date Date Eurocode Ref Made by Checked by Localized resource for UK Example: Pinned column using non slender UKC section (GB) Within this worked example on a pinned column UKC section in a simple structure, the column buckling resistance is calculated.

Uploaded by

berto2008
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
446 views

Simple Column Design Example

EN 1993-1-1 Laurent Narboux Charles King Date Date Eurocode Ref Made by Checked by Localized resource for UK Example: Pinned column using non slender UKC section (GB) Within this worked example on a pinned column UKC section in a simple structure, the column buckling resistance is calculated.

Uploaded by

berto2008
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Example: Pinned column using non slender UKC section (GB)

CALCULATION SHEET

Document Ref: Title

SX004a-EN-GB

Sheet

of

Example: Pinned column using non slender UKC section EN 1993-1-1 Laurent Narboux Charles King
Date Date

Eurocode Ref Made by Checked by

Oct 2006 Oct 2006

Localized resource for UK

Example: Pinned column using non slender UKC section


Within this worked example on a pinned column UKC section in a simple structure, the column buckling resistance is calculated.

N Ed

N Ed

Created on Friday, January 18, 2008 This material is copyright - all rights reserved. Use of this document is subject to the terms and conditions of the Access Steel Licence Agreement

8,0

8,0

[m]

SN008
Lcr. = 1.0 L Lcr. = 0 .7 L

Partial factors

M0 = 1.0 M1 = 1.0

EN 1993-1-1 6.1 (1)

Example: Pinned column using non slender UKC section (GB)

CALCULATION SHEET

Document Ref: Title

SX004a-EN-GB

Sheet

of

Example: Pinned column using non slender UKC section EN 1993-1-1 Laurent Narboux Charles King
Date Date

Eurocode Ref Made by Checked by

Oct 2006 Oct 2006

Basic data Design a column of a multi-storey building in consideration of the following data. Axial load : Column length : Buckling length : NEd = 2000 kN 8.00 m y-y axis: 1.0 8.00 = 8.00 m z-z axis: 0.7 8.00 = 5.60 m Steel grade : Section classification: S275 Class 2
z tf

UKC 305x305x97 Steel grade S275


Created on Friday, January 18, 2008 This material is copyright - all rights reserved. Use of this document is subject to the terms and conditions of the Access Steel Licence Agreement

BS4 Corus Advance

Depth Width Web thickness Flange thickness Fillet Section area

h = 307.9 mm b = 305.3 mm tw = 9.9 mm tf = 15.4 mm


z y

tw y h

r = 15.2 mm A = 123.4 cm2

Second moment of area /yy Iy = 22249 cm4 Second moment of area /zz Iz = 7308 cm4 Yield strength Steel grade S275 The maximum thickness is 15.4 mm < 40 mm, so : fy = 275 N/mm Note :
2

EN 1993-1-1 Table 3.1

When published, the National Annex may impose either the values of fy from the Table 3.1 or the values from the product standard. Here the values are the same.

x g

CALCULATION SHEET
i

Document Ref: Title

SX004a-EN-GB

Sheet

of

Example: Pinned column using non slender UKC section EN 1993-1-1 Laurent Narboux Charles King
Date Date

Eurocode Ref Made by

Oct 2006 Oct 2006

a y

Checked by

J p

Design buckling resistance of a compression member To determine the design column buckling resistance Nb,Rd, the reduction factor for the relevant buckling curve must be defined. This factor is determined by calculation of the non-dimensional slenderness based on the elastic critical force for the relevant buckling mode and the cross sectional resistance to normal forces. Elastic critical force Ncr The critical buckling force is calculated as follows :

, a y c

N cr, y =
d i

2 EI y Lcr, y
2

2 21000 22249 = 7205.3 kN 8002

N cr, z =

2 EI z 2 21000 7308 = = 4829.9 kN 2 560 2 Lcr, z

E is the Youngs modulus :


r l

E = 210000 N/mm2 Lcr,z = 5.60 m

L is the buckling length in the buckling plane considered: Lcr,y = 8.00 m


F a

Non-dimensional slenderness

The non-dimensional slenderness is given by :


n r

EN 1993-1-1 6.3.1.2 (1)

y =
o e

A fy N cr, y A fy N cr, z

123.4 27.5 = 0.686 7205.3 123.4 27.5 = 0.838 4829.9

d a

z =

For slenderness 0,2 or for


e m

N Ed 0,04 the buckling effects may be N cr ignored and only cross sectional checks apply.

EN 1993-1-1 6.3.1.2 (4)

C T

r h

e i

a s

Example: Pinned column using non slender UKC section (GB)

CALCULATION SHEET

Document Ref: Title

SX004a-EN-GB

Sheet

of

Example: Pinned column using non slender UKC section EN 1993-1-1 Laurent Narboux Charles King
Date Date

Eurocode Ref Made by Checked by

Oct 2006 Oct 2006

Reduction factor

For axial compression in members the value of depending on the nondimensional slenderness should be determined from the relevant buckling curve according to: 1 = but 1.0 2 EN 1993-1-1 2 + - 6.3.1.2 (1)
where : LT = 0.5 1 + - 0.2 +

is an imperfection factor.
For h/b = 307.9/305.3= 1.01 < 1.2 and tf = 15.4< 100 mm
-

buckling about axis y-y: Buckling curve b, imperfection factor = 0.34

Created on Friday, January 18, 2008 This material is copyright - all rights reserved. Use of this document is subject to the terms and conditions of the Access Steel Licence Agreement

y = 0.5 [1 + 0.34 (0.686 - 0.2) + 0.6862 ] = 0.818


y =
-

1 0.818 + 0.8182 - 0.6862

= 0.791

buckling about axis z-z: Buckling curve c, imperfection factor = 0.49

z = 0.5 [1 + 0.49 (0.838 - 0.2) + 0.8382 ] = 1.007


z =
1 1.007 + 1.007 2 - 0.8382 = 0.639

= min (y; z ) = min (0.791; 0.639) = 0.639 < 1.0


(when > 1 then = 1)
Design buckling resistance of a compression member
N b, Rd = A fy

M1

= 0.639

123.4 27.5 = 2168 kN 1 .0

EN 1993-1-1 6.3.1.1 (3)

Then we check:
N Ed 2000 = = 0.92 < 1.0 OK N b, Rd 2168

EN 1993-1-1 6.3.1.1 (1)

Example: Pinned column using non slender UKC section (GB)

Example: Pinned column using non slender UKC section SX004a-EN-GB

Quality Record
RESOURCE TITLE Reference LOCALISED RESOURCE DOCUMENT Name Created by Technical content checked by Editorial content checked by Laurent Narboux Charles King D C Iles Company SCI SCI SCI Date Oct 2006 Oct 2006 19/2/07 Example: Pinned column using non slender UKC section SX004a-EN-GB

Created on Friday, January 18, 2008 This material is copyright - all rights reserved. Use of this document is subject to the terms and conditions of the Access Steel Licence Agreement

You might also like