Professional Documents
Culture Documents
Cyrus Iiii Manual
Cyrus Iiii Manual
Cyrus IIIi b
R-CH
c d e f g h i j 1) 1!
OUT
1@
L-CH
(a)
Fig 4
L-CH=R-CH
L
PRE OUT TP OUT TP IN
(b)
PH AU VI TU CD
MC-BUS
SP
MADE IN ENGLAND
IN
R
GND
PSX-R
ONLY
USE
Fig 1
1&
1^
1%
1$ g
1#
(a)
L-CH
b cde f
Fig 5
-2dB
MUTE
(b)
PH
CD
TU
VI
AU
SP
TP
0dB (c)
Cyrus IIIi
Fig 2
1#
1@
1!
1)
h
(a)
+2dB
Fig 6
Audio Commander
MUTE ON
b d f 1) 1^ 1& 1*
Fig 3
Fig 7
c e g 1! i 1$ 1@
j h 1# 1%
Cyrus FM7
R-CH
Cyrus CD Player
OUT
L
PRE OUT TP OUT TP IN
L-CH
MC-BUS
SP
PH
AU
VI
TU
CD
MADE IN ENGLAND
IN
R
GND
PSX-R
ONLY
USE
2) 1(
Cyrus IIIi
Cyrus Power
User Instructions
IMPORTANT! Read before operating this equipment!
CAUTION: The exclamation mark is to draw your attention to important instructions and safety procedures in this manual. ATTENTION: The lightning flash warns you of the risk of electrical shock presented by components inside this product. Unauthorised personnel must not open this unit. WARNING: To reduce the risk of electrical shock do not remove any unit covers or panels. There are no user serviceable parts in this product. WARNING: To reduce the risk of electric shock, do not expose this equipment to rain or moisture. HEED WARNINGS: All warnings on the product and in the operating instructions should be adhered to. READ ALL THE INSTRUCTIONS: All the safety and operating instructions should be read before the product is operated. RETAIN INSTRUCTIONS: The safety and operating instructions should be retained for future reference. FOLLOW INSTRUCTIONS: All operating and use instructions should be followed. CLEANING: Unplug this product from the mains before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. WATER AND MOISTURE: Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement; or near a swimming pool and the like. HEAT: The product should be situated away from heat sources such as radiators, stoves, or any other products (including amplifiers) that produce heat. VENTILATION: Slots and openings in the cabinet are provided for ventilation, to ensure reliable operation of the product and to protect it from overheating and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. OBJECT OR LIQUID ENTRY: Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. ACCESSORIES: Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer. ATTACHMENTS: Do not use attachments not recommended by the product manufacturer as they may cause hazards. MOVING THE PRODUCT: A product and cart combination should be moved with care. Sudden stops, excessive force, and uneven surfaces may cause the product and cart to overturn. POWER SOURCES: This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions. OVERLOADING: Never overload wall outlets, extension cords, or integral convenience receptacles. This can result in an increased risk of fire or electric shock.
Cyrus llli
POWER CORD PROTECTION: Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. LIGHTNING: For added protection for this product during a lightning storm, or when it is left unattended or unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. CAUTION! POLARISED CONNECTOR (CANADA and USA): To prevent electrical shock, match wide blade of plug to wide slot, fully insert. Do not alter or remove this plug if it does not fit your mains power socket. Have a suitable socket installed by a competent electrician.
The mains supply requirement for your Cyrus llli is marked on a label on the rear panel. Before connecting, check that this voltage is the same as your mains supply. 230V Products: 115V Products: Voltage Range Voltage Range 220V-240V 110V-120V
If you move to an area with a different mains voltage, contact your local Cyrus distributor to have your product converted.
SERVICING:
Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. CONDITIONS REQUIRING SERVICE: Unplug this product from the wall outlet and refer servicing to qualified service personnel when: When the power supply cord or plug is damaged. If liquid has been spilled, or objects have fallen into the product. If the product has been exposed to rain or water. If the product has been dropped or damaged in any way. If the product does not operate normally by following the operating instructions. (Adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage requiring extensive work by a qualified technician to restore the product to its normal operation). When the product exhibits a distinct change in performance.
REPLACEMENT PARTS: When replacement parts are required, be sure the service technician has used replacements specified by the manufacturer or have the same characteristics as the original part. Unauthorised substitutions may result in fire, electric shock, or other hazards. SAFETY CHECK: Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.
GB
Cyrus llli
Welcome to the world of Cyrus!
Congratulations on your choice of Cyrus Hi-fi products. Our state-of-the-art design technology and outstanding quality of manufacture has won countless awards around the world. We are confident that you will derive great pleasure from owning a product from one of the most recognised and respected manufacturers of hi-fi equipment. Please read these instructions carefully before commencing installation. They provide full guidance to help you install your Cyrus llli safely and correctly.
User Instructions
Connecting Loudspeakers
Fit the supplied plugs to the loudspeaker cables making sure to line up + and - at each end. Most cables have polarity indicators and may also be marked for directionality. The + and - terminals of the Cyrus IIIi must be connected to the corresponding + and - terminals of the loudspeakers. Having ensured that your connections are secure, connect the left and right loudspeakers to the rear panel sockets and of the Cyrus IIIi.
Power
When power is applied, the STANDBY key is used for power control. The Standby light shows green when the Cyrus IIIi is operating and glows red when in standby mode. The Cyrus IIIi will switch from standby to on, when any input key
- is selected. When the Cyrus llli is switched on from the rear panel mains switch, it will perform a self-test and sit in Standby mode. When first switched on from standby the CD input is automatically selected and the volume is set to minimum. After the Cyrus llli as been operational and the unit is switched back into Standby mode, all settings for input selection and Volume/Balance are retained.
GB
User Instructions
Selecting an Input
The INPUT SELECT keys
- switch selected line level input sources. When an input key is selected, the red indicator above the key will turn on.
Cyrus llli
CYRUS AUDIO COMMANDER (Refer to Fig 3)
To insert the batteries. Remove the battery cover on the rear of the handset. Insert the AAA batteries observing all the polarity markings. Replace the compartment cover.
Mute
Pressing the MUTE Key will fade the volume to minimum level without disturbing the existing setting. When muted the RED minimum level indicator will light as well as the existing GREEN light to show that the output is muted. Move the volume knob or press the Mute key to fade back up to the original volume setting.
Bi-amping / Tri-amping
The pre-amplifier output of the Cyrus IIIi may be used in conjunction with added power amplifiers to upgrade your loudspeaker system through Biamping or Tri-amping. The Cyrus Power is recommended for this application.
GB
Cyrus llli
TROUBLESHOOTING GUIDE
If your Cyrus IIIi is not operating properly, disconnect the power and check carefully all connections. If you are in any doubt, consult your dealer. No sound Amplifier switched off or in Standby Mute is on (RED light on Vol. Ring) Tape Monitor on(RED tape light) Source not working (e.g. CD not playing) No sound from one loudspeaker BAL control at extreme limit Does your speaker have fuses? Speaker cables / interconnects faulty Spurious noises from speakers Interconnects or connections faulty Phono Ground not connected
User Instructions
WARRANTY
The warranty card enclosed should be completed by the Dealer and the purchaser and returned to CYRUS or its Distributor within 8 days of purchase. No Dealer or Distributor may vary the terms of this warranty, which is personal to the original Purchaser and is not transferable. Please retain the sales receipt as proof of purchase. Warranty claims must wherever possible be made through the Dealer from whom the equipment was purchased. This warranty excludes: Centralise Balance Check speaker, replace fuses Check connections, cables replace if needed Check, replace where necessary Make sure ground wire is firmly connected Damage caused through neglect, accident, misuse, wear and tear, or through incorrect installation, adjustment or repair by unauthorised personnel. Any unauthorised servicing will result in loss of warranty. Liability for damage or loss occurring in transit to or from the purchaser. Consequential damage, loss or injury, arising from or in conjunction with this equipment.
Bring unit out of Standby (Standby light - GREEN) Deselect Mute Operate Source See Fault Indication System
No response from any keys Switch off at rear panel, wait one minute and switch on. The problem should clear The Cyrus IIIi has a unique fault indication system to help you to diagnose problems. All fault indications appear on the Standby light on the front panel. Fault indications at first installation of a Cyrus IIIi with a PSX-R Flashing Red The Cyrus IIIi is modified for PSX-R but the PSX-R is not properly connected Flashing Green A PSX-R is connected to a Cyrus IIIi which has not been modified to take the PSX-R Fault Indications during use Flashing Green and Yellow An overload condition usually caused by excessive level or a problem with your loudspeakers Flashing Green A fault condition has been reported from the PSX-R Flashing Red An internal problem with Cyrus IIIi or PSX-R Remote control not working Remote control not operating Remote control will not operate a Cyrus CD player or tuner Check batteries CD or TU button must be pressed before sending a command Reduce level or Unplug speakers amplifier should restore
Equipment for attention under warranty should be consigned return carriage paid. If returned equipment is found to comply with the published specification, CYRUS reserves the right to raise a charge. The above conditions do not affect your statutory rights as a consumer.
SPECIFICATIONS
Power Supply Voltage: ................................................................... As plate on rear of unit Power Consumption Standby ..............................................................................................(12W) ON (No Load).....................................................................................(23W) ON (2 x 50W/Ch)..............................................................................(185W) Safety Requirements.........................................................CE, CSA and UL Enclosure Dimensions (WxHxD).....................................................215 x 75 x 365mm Weight ................................................................................................ 4.6Kg Material.............................................................................. Die cast chassis
Check PSX-R is plugged into Cyrus IIIi and that both units are connected to the mains Unplug PSX-R, check Cyrus IIIi. If Cyrus IIIi works OK, return to dealer for modification
Audio Performance
Input Sensitivity (50W/8).......................... Line ............................. 200mV Phono......................... 2.75mV Input Impedance ......................................... Line ............................... 50k Phono................... 47 k/50pf Frequency Response (-3dB)....................... Line ...................4.5Hz, 80kHz RIAA accuracy............................................. Phono........................+/-0.2dB Signal to Noise Ratio (A-WTD) ................... Line ............................107dBA Phono.................. 83dBA/5mV Power Output (both channels driven).......... 8 Ohms ........................... 50W THD+N (Pre-Amp) 1kHz ............................. Line .......................... <0.004% Phono........................... 0.01% THD+N (1kHz, 2/3 power)........................... 8 Ohms .................... <0.005% (both channels driven)
Cyrus reserves the right to change all specifications without notice. E &OE
Switch off power to both units, wait one minute, switch on - amplifier should restore Switch off and on - amplifier should restore
If a fault condition still remains, return the Cyrus IIIi (together with the PSX-R if you are using one) to your Cyrus appointed dealer or an authorised Service Centre.
GB
Gebrauchsanleitung
WICHTIGE HINWEISE! Unbedingt vor Benutzung des Gertes lesen!
VORSICHT:Das Ausrufungszeichen soll Ihre Aufmerksamkeit auf besonders wichtige Bedienungs- und Sicherheitshinweise in dieser Anleitung lenken. ACHTUNG: Das Blitzzeichen weist Sie auf die Gefahr eines elektrischen Schlages durch Bauteile im Innern des Gertes hin. ffnen des Gertes nur durch fachkundiges Personal. Warnung: Um die Gefahr eines elektrischen Schlages zu vermeiden, drfen die Abdeckungen oder Gehusewnde dieses Gerts nicht entfernt werden. Das Produkt enthlt keine vom Benutzer zu wartenden Teile. Warnung: Um die Gefahr eines elektrischen Schlages zu vermeiden, darf dieses Gert weder Regen noch Feuchtigkeit ausgesetzt werden. BEACHTEN SIE DIE VORSICHTSHINWEISE: Alle Vorsichtshinweise am Produkt und in der Gebrauchsanleitung mssen beachtet werden. LESEN SIE ALLE ANLEITUNGEN: Alle Anweisungen zur Sicherheit und zum Betrieb mssen vor der Benutzung des Gertes gelesen werden. BEWAHREN SIE DIE ANLEITUNGEN AUF: Die Anweisungen zur Sicherheit und zum Betrieb mssen zum Nachlesen aufbewahrt werden. BEFOLGEN SIE DIE ANWEISUNGEN: Alle Anweisungen zur Sicherheit und zum Betrieb mssen befolgt werden. REINIGUNG: Vor der Reinigung den Netzstecker ziehen. Keine flssigen Reinigungsmittel oder Sprays verwenden. Das Gert mit einem angefeuchteten Tuch reinigen. WASSER UND FEUCHTIGKEIT: Verwenden Sie dieses Produkt nicht in der Nhe von Wasser, z. B. Badewanne, Waschbecken, Sple, Waschkbel, im feuchten Keller oder in der Nhe eines Swimmingpools oder dergleichen. WRME: Das Produkt darf nicht in der Nhe von Wrmequellen wie Heizungskrpern, Heizgerten, fen oder von anderen wrmeerzeugenden Produkten (einschlielich Verstrkern) aufgestellt werden. LFTUNG: Die Schlitze und ffnungen im Gehuse dienen zur Belftung, welche den ausfallsicheren Betrieb des Produkts sicherstellt und es vor bermiger Erwrmung schtzt. Diese ffnungen drfen nicht blockiert oder verdeckt werden. Aus dem Grund darf das Produkt nicht auf ein Bett, ein Sofa, einen Teppich oder eine hnliche weiche Oberflche gestellt werden. Das Produkt eignet sich nicht fr den Einbau in ein Bcherregal oder ein Gestell, es sei denn, fr eine ausreichende Belftung ist gesorgt und die Anweisungen des Herstellers werden eingehalten. EINDRINGEN VON GEGENSTNDEN ODER FLSSIGKEITEN: Durch die ffnungen drfen keinerlei Gegenstnde in das Gert eingeschoben werden, da diese gefhrliche Spannungspunkte berhren oder Teile kurzschlieen knnten, was einen Brand oder elektrischen Schlag verursachen kann. ZUBEHR: Stellen Sie dieses Produkt nicht auf einen instabilen Rollwagen, Stnder, Stativ oder Tisch oder bringen Sie es nicht an einer instabilen Halterung an. Es kann herunterfallen, wobei Personen verletzt werden und Schden am Produkt entstehen knnen. Verwenden Sie nur Rollwagen, Stnder, Stative, Halterungen oder Tische, die vom Hersteller empfohlen oder die mit dem Produkt verkauft werden. Bei der Wandmontage des Produkts sind die Anweisungen des Herstellers zu befolgen und das vom Hersteller empfohlene Zubehr ist zu verwenden. ZUSATZGERTE: Verwenden Sie keine Zusatzgerte, die nicht vom Hersteller empfohlen werden, da Gefahren entstehen knnen. TRANSPORT: Wenn das Produkt auf einem Wagen transportiert wird, ist Vorsicht geboten. Durch pltzliches Anhalten, bermige Gewaltanwendung und unebenen Boden kann der Wagen mit dem Produkt umstrzen. NETZSPANNUNG: Dieses Produkt darf nur mit der auf dem Gerteschild angegebenen Netzspannung betrieben werden. Wenn Sie nicht wissen, welche Netzspannung bei Ihnen vorliegt, wenden Sie sich an Ihren Fachhndler oder Ihr Elektrizittswerk. Hinweise zu den Produkten, die mit Batterie oder anderen Stromquellen betrieben werden, entnehmen Sie der Bedienungsanleitung. BERLAST: Wandsteckdosen, Verlngerungskabel oder integrierte Steckdosen drfen nicht berlastet werden, da dies die Gefahr eines Brandes oder elektrischen Schlages verursachen kann.
Cyrus llli
NETZKABELSCHUTZ: Netzkabel mssen so verlegt werden, da ein Darberlaufen oder Einklemmen durch Gegenstnde verhindert wird. Besonders ist auf die Abschnitte des Kabels in der Nhe eines Steckers, einer Steckdose oder der Austrittsstelle aus dem Gert zu achten. BLITZSCHUTZ: Bei Gewittern oder wenn das unbeaufsichtigt oder unbenutzt bleibt, ziehen Schutzmanahme den Netzstecker und trennen Sie Kabelsystem. Damit werden Schden durch Blitz verhindert. Produkt lngere Zeit Sie als zustzliche die Antenne oder das oder Spannungsste
VORISICHT! GEPOLTER STECKER (NUR IN DEN USA UND KANADA): Zur Verhinderung eines elektrischen Schlages mu der flache Steckerstift in den breiten Schlitz der Steckdose eingesteckt werden. Den Stecker ganz einstecken. Wenn der Stecker nicht in Ihre Netzsteckdose pat, drfen Sie diesen nicht ndern oder abtrennen. Lassen Sie von einem ausgebildeten Elektriker eine geeignete Steckdose installieren.
NETZVERSORGUNG:
Der eingekerbte IEC-Stecker des mitgelieferten Netzkabels gehrt in den entsprechenden Anschlu auf der Rckseite des Gerts. Die Netzsicherung befindet sich ebenfalls auf der Rckseite neben dem Netzschalter. Sie darf ausschlielich durch folgende Typen ersetzt werden: Grobritannien / Europa - 230V T1A 20mm Nordamerika / Fernost - 115V T2A 20mm Die vorgeschriebene Betriebsspannung ist auf einem rckseitigen Aufkleber angegeben. Stellen Sie vor dem Anschlu sicher, da diese Ihrem rtlichen Stromnetz entspricht, z. B. 230V Produkte: Spannungsbereich von 220V-240V 115V Produkte: Spannungsbereich von 110V-120V Wenn Sie in eine andere Region mit unterschiedlicher Netzspannung umziehen, wenden Sie sich an Ihren Cyrus Vertrieb, um die Anpassung des Gerts vorzunehmen.
REPARATUREN:
Versuchen Sie nicht, dieses Produkt selbst zu reparieren oder die Verkleidungen zu entfernen, da Sie sich dadurch Hochspannung oder anderen Gefahren aussetzen wrden. berlassen Sie alle Reparaturen den Fachleuten. BEDINGUNGEN, DIE REPARATUREN ERFORDERN: Ziehen Sie den Netzstecker und beauftragen Sie den Kundendienst mit der Reparatur des Gertes, wenn: Netzkabel oder -stecker beschdigt sind Flssigkeit oder Gegenstnde in das Gert eingedrungen sind das Gert Regen oder Wasser ausgesetzt wurde das Gert heruntergefallen oder anderweitig beschdigt ist das Gert unter Befolgung der Bedienungsanleitung nicht normal funktioniert. Verstellen Sie nur die Regler, die in der Bedienungsanleitung beschrieben werden. Das unsachgeme Verstellen von anderen Reglern kann Schden verursachen und aufwendige Reparaturen durch einen qualifizierten Techniker erfordern, um das Gert wieder in seinen normalen Betriebszustand zu versetzen. das Produkt eine deutliche Leistungsminderung aufweist - in dem Fall ist eine Reparatur notwendig.
ERSATZTEILE: Wenn Ersatzteile erforderlich sind, sollten Sie sich vergewissern, da der Techniker Ersatzteile verwendet, die vom Hersteller angegeben werden oder die die gleichen Eigenschaften wie die Originalteile aufweisen. Unzulssige Ersatzteile knnen Brnde, elektrischen Schlag oder andere Gefahren verursachen. SICHERHEITSKONTROLLE: Bitten Sie den Techniker, im Anschlu an Wartungs- oder Reparaturarbeiten Sicherheitskontrollen durchzufhren, um den ordnungsgemen Betriebszustand des Gertes zu besttigen.
KUNDENDIENSTZENTRALEN:
Wenden Sie sich bei Fragen zum Produktservice oder bei technischen Problemen nur an autorisierte Cyrus-Kundendienstzentralen. Eine Liste der Hauptzentralen finden Sie auf der hinteren Umschlagseite dieser Bedienungsanleitung.
Cyrus llli
Willkommen in der Cyrus Welt!
Vielen Dank, da Sie sich fr Produkte aus der Cyrus-Serie entschieden haben. Mit state-of-the-art Konzeptionen und hervorragender Produktqualitt konnten wir weltweit zahllose Preise gewinnen. Wir sind sicher, da Ihnen dieses Gert von einem der anerkanntesten HiFi-Hersteller immer viel Freude bereiten wird. Lesen Sie bitte diese Anweisungen sorgfltig durch, bevor Sie mit der Installation beginnen. So knnen Sie Ihren Cyrus llli sicher und korrekt in Betrieb nehmen.
Gebrauchsanleitung
Anschlu der Lautsprecher
Montieren Sie die beigefgten Stecker an die Lautsprecherkabel und achten Sie auf die Markierungen fr die Polaritt (+ oder -) an beiden Enden. Auch die Laufrichtung kann durch einen Pfeil markiert sein und sollte unbedingt beachtet werden. Die + und - Anschlsse des Cyrus IIIi mssen mit den entsprechenden Anschlssen der Lautsprecher verbunden werden. Wenn die Kabel konfektioniert sind, verbinden Sie den linken und rechten Lautsprecher mit den rckseitigen Buchsen und des Cyrus IIIi.
Gebrauchsanleitung
Eingangswahl
Mit den Eingangs-Tasten knnen Sie den gewnschten Eingang whlen. Ein rotes Lmpchen ber diesen Tasten signalisiert, welcher Eingang gewhlt wurde.
Cyrus llli
DER CYRUS AUDIO COMMANDER (siehe Abbildung 3)
Einlegen der Batterien Entfernen Sie den Batteriefachdeckel auf der Rckseite der Fernbedienung. Legen Sie die beigefgten Batterien unter Beachtung der Polarittszeichen ein. Befestigen Sie den Bateriefachdeckel wieder.
und
1. 2.
3. 4. 5. 6. 7. 8. 9.
Wlt den VI-Eingang Whlt den CD- und Tuner-Eingang Wenn Sie einen Cyrus CD-Player oder FM7 Tuner besitzen, schaltet sich die betreffende Komponente bei der Wahl des zugehrigen Eingangs am Cyrus IIIi. an Whlt den AUX- oder SP-Eingang Schaltet TAPE MONITOR an und aus Justiert die Lautstrke Whlt die BALANCE Whlt MUTE Schaltet alle Cyrus-Komponenten aus Schaltet den Cyrus IIIi. an
Tasten 10-20 beeinflussen Cyrus CD-Player und/oder den Cyrus FM7 Tuner
10. Whlt Play ........................................................................Cyrus CD-Player 11. Whlt Pause .....................................................................Cyrus CD-Player 12. Whlt schnellen Vor-Rcklauf..........................................Cyrus CD-Player
Auto tuning - Suchlauf AUF/ABWRTS ................................... Cyrus FM7
Muting
Die Bettigung der Mute-Taste blendet die Lautstrke auf Minimal-Pegel, ohne die bestehende Lautstrke-Einstellung zu verndern. Wurde die Mute-Taste bettigt, leuchtet die rote Minimum-Anzeige der Lautstrke-Skala zustzlich auf. Durch leichtes Drehen des Lautstrke-Knopfs oder erneutes Bettigen der MuteTaste wird die Mute-Funktion aufgehoben und automatisch die vorher gewhlte Lautstrke wieder hergestellt.
14. Whlt STOP/EJECT.........................................................Cyrus CD-Player 15. Speichert ein Programm ..................................................Cyrus CD-Player
Speichert Sender....................................................................... Cyrus FM7
16. Numerische Tastatur............................................Cyrus CD-Player & FM7 17. Schaltet das Display ein/aus................................Cyrus CD-Player & FM7 18. Schaltet die absolute Phase um ......................................Cyrus CD-Player 19. Whlt zwischen abgelaufener Spielzeit/
Restzeit.............................................................................Cyrus CD-Player
Bi-Amping/Tri-Amping
ber die gepufferten Vorverstrkerausgnge des Cyrus IIIi knnen Sie weitere Endverstrker fr den Bi-Amping- oder Tri-Amping-Betrieb von Lautsprechern anschlieen. Wir empfehlen dazu den Cyrus Power.
Programmierbare Eingangsempfindlichkeit
(siehe Abbildung 5 ) Schalten Sie von einem Eingang zum nchsten, variiert die Lautstrke wegen der unterschiedlichen Ausgangspegel der angeschlossenen Komponenten immer ein wenig. Um diesen Effekt zu kompensieren, knnen Sie mit dem Kalibrierungsspeicher des Cyrus IIIi alle Eingangsempfindlichkeiten bezogen auf den CD-Eingang kompensieren. Um eine Anpassung der Eingnge vorzunehmen, gehen Sie bitte wie folgt vor: 1. 2. Whlen Sie den CD-Eingang und stellen den Drehregler auf Zimmerlautstrke. Whlen Sie den Eingang der justiert werden soll und halten Sie die Taste gedrckt bis die Lautstrkeanzeige auf Empfindlichkeits-Kalibrierung umschaltet. Gleichen Sie nun die Lautstrke des gewhlten Eingangs an die Lautstrke des CD-Spielers an. Sie knnen den Abgleich an der Lautstrkeanzeige ablesen. Speichern Sie die Kalibrierung indem Sie den schon vorher gewhlten Eingang erneut drcken.
3.
4.
Wiederholen Sie die Schritte 2-4, um weitere Eingnge zu justieren. Abb. 5(a) - 5(c) zeigen Einstellungen fr Eingangsempfindlichkeiten, die auf -2 dB, 0 dB und + 2dB (ausgehend vom CD-Player) eingestellt wurden.
Cyrus llli
GARANTIE
Die Garantie tritt nur in Kraft, wenn die beigefgte Garantiekarte vom Hndler und Kufer ausgefllt und innerhalb von 8 Tagen nach dem Kauf an den CYRUS Vertrieb zurckgeschickt wird. Keinem Hndler oder Vertreiber ist es gestattet die Bedingungen dieser Garantie zu verndern, die nur fr den Erstbesitzer gilt. Bitte bewahren Sie die Rechnung als Kaufnachweis auf. Ansprche mssen, wenn mglich, ber den Hndler geltend gemacht werden, bei dem die Ware gekauft wurde. Die Garantie beinhaltet nicht: Alle Schden, die durch Unfall, falschen Gebrauch, Verschlei oder durch falsche Installation, Einstellung oder Reparatur durch unautorisiertes Personal verursacht wurden. Alle nicht autorisierten Service-Eingriffe haben den Garantieverlust zur Folge. Haftung fr Beschdigung oder Verlust whrend des Transportes vom und zum Kufer. CYRUS haftet nicht fr eventuelle Sach- oder Personenschden, die durch den Gebrauch dieser Gerte oder in Verbindung mit diesen Gerten entstanden sind.
Gebrauchsanleitung
TECHNISCHE DATEN
Netzteil Betriebsspannung: ................................................. siehe Plakette auf der Rckseite Leistungsaufnahme Standby (12W) AN (ohne Last) (23W) AN (2 x 50W/Kanal) (185W) Sicherheitsstandard ........................................................................ CE, CSA and UL Gehuse Abmessungen (BxHxT).................................................................215 x 75 x 365mm Gewicht.............................................................................................................. 4.6 kg Material............................................................................................Druckguchassis
Audio-Wiedergabe
Eingangsempfindlichkeit (50W/8) Eingangsimpedanz Line............................................ 200mV Phono ....................................... 2.75mV Line .............................................50k Phono ...................................47k Frequenzgang (-3dB) Line.................................. 4.5Hz, 80kHz Phono ..................................... +/-0,2 dB Geruschspannungsabstand (A-bewertet) Line...........................................107dBA Ausgangsleistung pro Kanal (beide Kanle betrieben) Phono .............................. 83 dBA/5 mV 8 Ohm............................................ 50W
Die Transportkosten (zum Hndler und zurck) sind vom Kufer zu tragen.Stellt sich bei der berprfung eines Gertes heraus, da es den angegebenen technischen Spezifikationen entspricht, behlt sich CYRUS das Recht vor, berprfung und Rcktransport in Rechnung zu stellen. Die hier angegebenen Bedingungen schrnken Ihre Rechte als Kufer nicht ein
Klirrfaktor (Vorstufe) 1kHz Line ........................................ <0.004% Phono ..........................................0,01% Klirrfaktor (1kHz, 2/3 Leistung)8 Ohm ................................... <0.005% (beide Kanle) Cyrus behlt sich das Recht vor, alle technischen Spezfikationen ohne vorherige Ankndigung zu ndern. E & OE.
Distributor List
CYRUS ELECTRONICS LTD Stonehill, Huntingdon, Cambridgeshire, PE18 6ED Tel: (44) 0 1480-451777, Fax: (44) 0 1480-432777 Internet: www.cyrus.co.uk
Cyrus IIIi
To the Purchaser: In order for us to bring you excellent customer support , please remember to register your purchase!
ARGENTINA: Wullich Audio Visual Paraguay 1524, 1061 Buenos Aries Tel: (54) 1 8156006, Fax (54) 1 8122406 AUSTRALIA: Crestmore Pty Ltd. Unit 4/42 Leighton Place, Hornsby NSW 2077 Tel: (61) 29 482 3922 or (61) 29988 4555, Fax: (61) 29 482 3699 BELGIUM: Belram Hi-Fi nv/sa, Rue de l'Orme 50, Olmstraat 50, 1030 Brussels Tel: (32) 2 736 50 00, Fax: (32) 2 735 38 16 CANADA: Mission Electronics Inc. 400 Matheson Boulevard East, Unit 31, Mississauga, Ontario, L4Z 1N8 Tel: (01) 905 507 0777 Fax: (01) 905 507 0797 CROATIA: SONATEL doo A Heinza 3, 10 000 Zagreb Tel: (38) 5 14633 419 Fax: (38) 5 1 46 33 434 CYPRUS: Nicos Hadjioannou & Sons Ltd. No 14A Arch Makarios III Ave, PO Box 5478, Nicosia Tel: (35) 7 2754162 Fax: (35) 7 2758211 CZECH REPUBLIC: DATART International Pernerova 35, Praha 8 - 186 00, Karlin Tel: (42) 0 221897 111/275 Fax: (42) 0 221897 171 DENMARK: Verity Scandinavia APS Industrivej 30, DK 2605, Brondby Tel: (45) 4343 1777, Fax: (45) 4343 1767 FINLAND: SLO-Kondintekniikka PO Box 88, 01741 Vantaa. Tel: (35) 8 10 2832201, Fax: (35) 8 10 2832040 FRANCE: Audio Marketing Services 1 Rue Jean Perrin, 93150 Le Blanc Mesnil, Paris Tel: (33) 1 55810070, Fax: (33) 1 48673147 GERMANY: Mission Electronics, GmbH Hindenburgstrasse 107, 22297 Hamburg Tel: (49) 40 5 148370, Fax: (49) 40 5 104 49 GREECE: Kinotechniki Ltd. 47 Stournara Street, 106-82 Athens Tel: (30) 1 380 6998/3827436, Fax: (30) 1 3801121/3302273 HOLLAND: TES Nederland B/V Coenecoop 81A, 2741 PH Waddinxveen Tel: (31) 182612669, Fax: (31) 182614765 HUNGARY: Infovox Kft. Terez Korut 31, 1067 Budapest Tel: (36) 1 3022515, Fax: (36) 1 3022515 ICELAND: Radiobaer EHF Armula 38, PO Box 8933, 128 Reykjavik Tel: (35) 4 553 1133, Fax: (35) 4 588 4099 IRELAND: Audio Vision Import Ltd. Acoustic House, John F Kennedy Drive, Naas Road, Dublin 12 Tel: (35) 31 4504855, Fax: (35) 31 4504870 ISRAEL: S G Electronics Ltd. 59 Pinsker St, Tel Aviv 63568 Tel: (97) 2 36298925, Fax: (97) 2 35287926 ITALY: MPI Electronic SRL Via de Amicis 10/12, 20010 Cornaredo, Milan Tel: (39) 02 936 4195, Fax: (39) 02 935 65250 KENYA: Ashna Electronics AE PO Box 18558, Nairobi Tel: (25) 42 553926, Fax: (25) 42 545470 KOREA: Sungmin Trading #653-17 Panghak Dong, Dobong-Gu, Seoul 132-020 Tel: (82) 2 34922586, Fax: (82) 2 34922588 KUWAIT: Easa Husain Al-Yousifi PO Box 126 Safat - 13002 Tel: (96) 5 2436399, Fax: (96) 5 2457277 LEBANON: Top Ten Phoenica Street, Ajram Bldg, PO Box 4680, Beirut Tel: (96) 1 9912535, Fax: (96) 1 1604521 LITHUANIA: Ogmios Pulsas Verkiu 29, LT-2600 Vilnius Tel: (37) 02 737039 or (37) 02 722888, Fax: (37) 02 722835 MALTA: Cachia & Galea Standard Buildings, De Brockdorf Street, Msida MSD-02, Malta Tel: (35) 6 333861/3, Fax: (35) 6 333866 MAURITIUS: Lo Thiap Hing Ltd. Level 2, Labourdonnais Court Building, Cnr St Georges/Labourdonnais Streets, Port Louis. Tel: (23) 0 2111349, Fax: (23) 0 2112281 NEW ZEALAND: Crestmore Pty Ltd. PO Box 99-111, New Market, Auckland Tel: (64) 2704001, Fax: (64) 9 2704007 NORWAY: Verity Norway a/s Haslevn 28, Inng 3 (entrance 3) 0571 Oslo. Tel: (47) 22871737, Fax: (47) 22871738 POLAND: Misja Audio al. Armii Ludowej 13, 00-632 Warszawa Tel: (48) 228431189, or (48) 228131379; Fax: (48) 228431189
17
Cyrus IIIi
PORTUGAL: Diper-Comercio de Alta Fidelidade LDA. Rua Veloso Salgado 971-C, 4450 Leca Palmeira Tel: (35) 1 2 9968246, Fax: (35) 1 2 9968248 RUSSIA: NEXT Company Speridonevsky per, 17 Moscow Tel: (70) 95 2902212, Fax: (70) 95 2902579 SAUDI ARABIA: Ultimate Fidelity Trdg Est Sameria Comm. Center, Roadah Dist. PO Box 7760 Jeddah 21472 Tel: (96) 6 2 6672189, Fax: (96) 6 2 6672189 SINGAPORE: Pertama Audio Pte Limited 315 Outram Road, #01-01/02 Tan Boon Liat Bldg, Singapore 169074 Tel: (65) 2256006, Fax: (65) 2254311 SLOVENIA: Bofex doo Ljubljana, Smartinska 152, Hala 5, 61000 Ljubljana Tel: (38) 6 611873511, Fax: (38) 6 61445478 SOUTH AFRICA: Hi Fi Specialists (Pty) Ltd. 155 Durbon Road, Bellville 7530 Tel: (27) 219461441, Fax: ( 27) 219464364 SPAIN: EAR SA Heraclio Fournier 5, Vitoria 01006 Tel: (34) 945 14 11 10, Fax: (34) 945 13 53 75 SWEDEN:Verity Sweden AB Kanotleden 1, 362 21 Tingsryd Tel: (46) 477 45777, Fax: (46) 477 45770 SWITZERLAND: F.S. Fidelity Sound AG berlandstr. 18, 8051 Zrich Tel: (41) 1 312 4011, Fax: (41) 1 311 5273
Distributor List
TAIWAN: Pai-Yuing Co., Ltd. 6F 148 Sung Kiang Road, Taipei Tel: (88) 6 2 25221304, Fax: (88) 6 2 25630415 THAILAND: Oriental Elecktrek Ltd. 155-163 Chulalongkorn 16, Patoomwan, Bangkok 10330 Tel: (66) 2 2144931, Fax: (66) 2 2153719 UNITED ARAB EMIRATES: Ms Vithaldas V & Sons Ltd (LLC) PO Box No. 105, Dubai Tel: (97) 1 4 532444, Fax: (97) 1 4 535856
NOTES
18