Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 510 views

    513 Ultraplan Eco UK NoRestriction

    Uploaded by

    Floorkit
    513 Ultraplan Eco UK NoRestriction

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    513 Ultraplan Eco UK NoRestriction

    Uploaded by

    Floorkit
    510 views4 pages
    513 Ultraplan Eco UK NoRestriction

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    513 Ultraplan Eco UK NoRestriction

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    510 views4 pages

    513 Ultraplan Eco UK NoRestriction

    Uploaded by

    Floorkit
    513 Ultraplan Eco UK NoRestriction

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    n a l p o a c r t E l U

    :7

    81115056

    Ultra-fast hardening self-levelling compound with very low VOC (volatile organic compound)

    WHERE TO USE Ultraplan Eco is used for interior levelling and removing differences in thickness from 1 to 10 mm of new or existing substrates, preparing them to receive any kind of flooring where excellent resistance to loads and traffic is needed. Ultraplan Eco is particularly suitable for areas subject to wheeled chairs. Ultraplan Eco is for interior use only. Some application examples Levelling concrete slabs, cement, Mapecem, Mapecem Pronto, Topcem or Topcem Pronto, anhydrite and magnesite based screeds with underfloor heating systems incorporated. Levelling existing cement, terrazzo, ceramic and natural stone floors. TECHNICAL CHARACTERISTICS Ultraplan Eco is a grey powder consisting of special cements with rapid setting and hydration together with graded silica sand, resins and special additives, according to a formula developed in the MAPEI Research and Development Laboratories. Mixed with water Ultraplan Eco becomes a highly fluid and easily workable mortar, which is self-levelling, with high adhesion to the substrate and dries ultra-quickly. Ultraplan Eco can be applied with an automatic pressure pump for distances over 100 m. Ultraplan Eco can be spread in thicknesses up to

    10 mm per coat without shrinkage, cracking or crazing, and develops very high compressive and flexural strength, as well as resistance to indentation and abrasion. Ultraplan Eco is ready to receive flooring after approximately 12 hours, regardless of the thickness. It is recommended to wait 24 hours before installing wooden flooring. Ultraplan Ecos VOC content is practically zero, certified by the TFI German Institute, so is harmless to the health of the installer and the end-user. RECOMMENDATIONS Do not add water to a mix which has already started to set. Do not add lime, cement or gypsum to the mix. Do not use Ultraplan Eco for exterior levelling work. Do not use Ultraplan Eco on substrates subject to continuous rising damp. If a coat of Ultraplan Eco needs to be applied once the preceding one is completely dry, first apply Eco Prim R. Do not apply Ultraplan Eco at temperatures below +5C. Do not apply Ultraplan Eco at thicknesses less than 3 mm when wooden flooring is to be installed.

    [sche1] 513 U.K. - 1 (ULTRAPLAN ECO) (10.06.2005 - 7 Bozza/Ciano Digitale/Pell.)

    n a l p co a r Ult E

    TECHNICAL DATA (typical values):

    Certified by the TFI German Institute, Certif. N 99369

    PRODUCT IDENTIFICATION Consistency: Colour: Bulk density (kg/m3): Dry solid content (%): Storage: fine powder grey 1300 100 12 months in original sealed packaging in a dry place none. Before using refer to the Safety instructions for preparation and application paragraph and the information on the packing and Safety Data Sheet 3824 50 90

    Hazard classification according to EC 99/45:

    Custom class: APPLICATION DATA at +23C 50% R.H. Mixing ratio:

    25-26 parts of water per 100 parts by weight of Ultraplan Eco from 1 to 10 mm yes 2000 approx. 12 from +5C to +35C 20-30 minutes 45-60 minutes 3 hours 12 hours (24 hours for wood flooring)

    Thickness per coat: Self levelling: Density of the mix (kg/m3): pH of mix: Application temperature range: Open time: Setting time: Set to light foot traffic: Time before laying flooring: FINAL PERFORMANCE DATA Compressive strength (N/mm2): after 1 day: after 3 days: after 7 days: after 28 days: Flexural strength (N/mm2): after 1 day: after 3 days: after 7 days: after 28 days: Resistance to abrasion Taber Abrasimer (Abrading wheel H22-550 g-200 revolutions) expressed as weight loss (g): after 7 days: after 28 days: Brinell hardness: after 1 day: after 3 days: after 7 days: after 28 days:

    12.0 17.0 20.0 26.0

    3.0 4.0 5.0 7.0

    2.8 2.3

    55 70 80 100

    APPLICATION PROCEDURE Preparing the substrate Substrates must be completely dry, solid, free from dust, loose areas, paint, wax, oil, rust and traces of gypsum. Cement based surfaces not sufficiently solid must be removed or, where possible, reinforced with Prosfas or Primer MF. Fissures in concrete substrates must be repaired with Eporip. Dusty or very porous concrete surfaces must be treated with a coat of Eco Prim R, diluted with water 1:1 (Eco Prim R has been certified by the TFI German Institute as a very low VOC content product). Anhydrite screeds can be levelled with Ultraplan Eco, but must first be abraded to remove any surface laitance and then primed with a coat of Eco Prim R (diluted with water 1:1) or Mapeprim SP, before the application of Ultraplan Eco. Ceramic and natural stone substrates must be cleaned with detergents and abraded and then primed with undiluted Eco Prim R. Preparing the mix Pour a 23 kg bag of Ultraplan Eco into a bucket containing 5.75 litres of clean water and mix with a low speed electric mixer to obtain an homogeneous lump free mix. Larger quantities can be prepared in on-site mixers. After 2-3 minutes of slackening, restir the mix. The mix is then ready for use. It is recommended to add approximately 20-30% of 0/4 or 0/8 grain sand when Ultraplan Eco is used for thicknesses greater than 10 mm (max 20 mm). For further information consult MAPEI Technical Assistance. The quantity of Ultraplan Eco mixed at any time must be used within 20-30 minutes (at +23C). Spreading the mix Apply Ultraplan Eco in a single coat from 1 to 10 mm with a large metal trowel or rake keeping the trowel slightly inclined to obtain the desired thickness. Ultraplan Eco can also be applied with an automatic pressure pump. Due to its exceptional self levelling properties Ultraplan Eco immediately loses small imperfections (trowel marks, etc.). When a second coat of Ultraplan Eco is required, it is recommended to apply it as soon as the first one is set to light foot traffic (approximately 3 hours at +23C). Ultraplan Eco is suitable to receive resilient, carpet, and ceramic floor coverings fixed after 12 hours at +23C (the time can vary,

    depending on the room temperature and humidity). When installing wood flooring or natural stone, wait 24 hours. Check the humidity content with a carbide hygrometer or an electric moisture meter, keeping in mind that the latter only gives indicative values. Cleaning While still wet, Ultraplan Eco can be removed from tools with water. CONSUMPTION 1.6 kg/m2 per mm of thickness. PACKAGING Ultraplan Eco is available in 23 kg bags. STORAGE Ultraplan Eco stored in a dry place is stable for at least 12 months. However, with time it could undergo a slower setting time but the final characteristics do not alter. SAFETY INSTRUCTIONS FOR THE PREPARATION AND APPLICATION Ultraplan Eco is not considered a dangerous substance according to current norms and regulations regarding the classification of substances. The usual precautions taken when handling chemical products are recommended. If the product is applied in a closed area, make sure that it is well ventilated. The Safety Data Sheet is available on request for professional users. FOR PROFESSIONALS. WARNING Although the technical details and recommendations contained in this product report correspond to the best of our knowledge and experience, all the above information must, in every case, be taken as merely indicative and subject to confirmation after long-term practical applications; for this reason, anyone who intends to use the product must ensure beforehand that it is suitable for the envisaged application. In every case, the user alone is fully responsible for any consequences deriving from the use of the product.

    All relevant references of the product are available upon request

    n a l p co a r Ult E
    (U.K.) A.G. BETA

    BUILDING THE FUTURE

    MAPEI GROUP CERTIFIED MANAGEMENT SYSTEMS (Quality, Environment and Safety)

    CERTIQUALITY No. 250

    MAPEI S.p.A. - ITALY

    CERTIQUALITY No. 5776

    DNV No. 12026-2002 AQ-BUD-TGA

    ITC No. 03 0063 SJ

    CERTIQUALITY No. 6853

    QMI No. 004157

    CERTIQUALITY No. 3358

    IRAM No. AR-QS-688

    MAPEI SUISSE SA

    MAPEI Kft. - HUNGARY

    MAPEI s.r.o.- CZECH REP .

    MAPEI CORP - U.S.A.

    MAPEI INC - CANADA

    MAPEI FAR EAST Pte Ltd MAPEI MALAYSIA SDN BHD MAPEI ARGENTINA S.A.

    CERTIQUALITY No. 1517

    DNV No. 94-OSL-AQ-6236

    MAPEI FRANCE

    RESCON MAPEI AS - NORWAY

    www.mapei.com

    513-6-2005

    Any reproduction of texts, photos and illustrations published here is prohibited and subject to prosecution

    You might also like