Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 143 views

    PDF

    Uploaded by

    Nithya Ravi
    The document discusses how to throttle the CPU and network usage of an Avamar client during backups. By default, the Avamar client process uses as much resources as the operating system allows. This can be throttled by adding flags to the avtar.cmd file located in the Avamar client's configuration directory. The --cpu-throttle flag followed by a percentage limits CPU usage, while --throttle followed by a bandwidth in Mbps restricts network usage. Care should be taken as throttling can significantly increase backup time.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    PDF

    Uploaded by

    Nithya Ravi
    143 views4 pages
    The document discusses how to throttle the CPU and network usage of an Avamar client during backups. By default, the Avamar client process uses as much resources as the operating system allows. This can be throttled by adding flags to the avtar.cmd file located in the Avamar client's configuration directory. The --cpu-throttle flag followed by a percentage limits CPU usage, while --throttle followed by a bandwidth in Mbps restricts network usage. Care should be taken as throttling can significantly increase backup time.

    Original Description:

    Ava

    Original Title

    DOC-19880.pdf

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses how to throttle the CPU and network usage of an Avamar client during backups. By default, the Avamar client process uses as much resources as the operating system allows. This can be throttled by adding flags to the avtar.cmd file located in the Avamar client's configuration directory. The --cpu-throttle flag followed by a percentage limits CPU usage, while --throttle followed by a bandwidth in Mbps restricts network usage. Care should be taken as throttling can significantly increase backup time.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    143 views4 pages

    PDF

    Uploaded by

    Nithya Ravi
    The document discusses how to throttle the CPU and network usage of an Avamar client during backups. By default, the Avamar client process uses as much resources as the operating system allows. This can be throttled by adding flags to the avtar.cmd file located in the Avamar client's configuration directory. The --cpu-throttle flag followed by a percentage limits CPU usage, while --throttle followed by a bandwidth in Mbps restricts network usage. Care should be taken as throttling can significantly increase backup time.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    How to throttle CPU and network usage of an Avamar client during backups

    Symptom: An Avamar client requires memory, CPU and network resources in order to perform a backup.

    The amount of memory required is dependent on the Avamar client's cache file sizing. By default, the Avamar client's avtar process will use as much network bandwidth and CPU cycles as are made available to it by the operating system.

    CPU Utilization If a backup runs during a time of day where the client machine is under heavy production load it may be considered desirable to throttle avtar's CPU utilization in order to ensure that CPU cycles remain available for other system services.

    Avtar CPU utilization can be reviewed in the Avamar client backup log as shown below:

    avtar Info <5100>: Status 2009-04-10 20:37:02, 0 files, 25.00 GB (0 files, 473.7 MB, 1.85% new) 117MB 99% CPU

    Network utilization If an Avamar client is located remote from an Avamar server via a low bandwidth link it may be desirable to throttle network utilisation under certain circumstances.

    Generated by Jive on 2013-03-13-07:00 1

    How to throttle CPU and network usage of an Avamar client during backups

    Cause: Avtar's usage of CPU cycles and network bandwidth is not restricted by default. This is normal and expected behaviour as it is usually most desirable that Avamar backups run and complete as quickly as possible.

    Resolution: The following flags exist to throttle network and cpu utilisation of the avtar process:

    --throttle (throttles network usage) --cpu-throttle (throttles CPU usage)

    To implement either of these flags, edit the avtar.cmd file found in the Avamar client's avs/ var directory. Create a new avtar.cmd file if one does not already exist.

    CPU Throttling The entry made in the file should be in the following format, where '80' is the maximum average percentage of CPU that the avtar process should use.

    --cpu-throttle=80

    Network Throttling The entry made in the file should be in the following format:

    Generated by Jive on 2013-03-13-07:00 2

    How to throttle CPU and network usage of an Avamar client during backups

    --throttle=MBPS

    When implemented, avtar will pause as long as necessary after sending each packet in order to ensure that network usage does not exceed the specified maximum bandwidth (specified in mega bits per second)

    For example, --throttle=5 uses half a 10Mbps connection, --throttle=0.772 restricts usage to one-half of a T1 link.

    After making the changes, save the avtar.cmd file. Restart the client agent from the client GUI (Operations > Advanced > Restart Client agent, in Windows) and run the backup.

    CAUTION 1. Processes normally run as fast as they can. If we attempt to lower the CPU utilisation of the client processes, then the backup may run MUCH slower than it otherwise would and may not complete in time for the backup window.

    2. If we slow down the process, other clients which are queueing to start their backups will be delayed by the lengthened backup time of this client.

    3. If the client is performing other work at the time of the Avamar backup, this work will be impacted less but for a longer period of time.

    Generated by Jive on 2013-03-13-07:00 3

    How to throttle CPU and network usage of an Avamar client during backups

    4. If in doubt about the suitability of applying the flags discussed below, contact your EMC Professional Services representative.

    Please refer to Knowledge Base article esg95533 for detailed explanation.

    Generated by Jive on 2013-03-13-07:00 4

    You might also like