API Standard Valve

API Steel Gate Valve
API SERIES
GENERAL VALVE
CONTENTS
Standards
API Globe Valve
08-13
API Check Valve
14-19
API Floating Ball Valve
20-25
API Trunnion Ball Valve
26-33
API Butterfly Valve
34-42
API Forged steel gate valves
43-46
API Forged steel globe valves
47-50
API Forged steel check valves
51-53
Steel Gate Valve

General Valve
Gasket of Cover Flange

Carbon steel or stainless steel + flexible graphite combined
gasket is used for Class150 gate valve; Stainless steel + flexible
graphite wounded gasket is used for Class 300 gate valve; Stainless
steel + flexible graphite wounded gasket is used for Class600 gate
valve and ring joint gasket is also optional for Class600 gate valve;
Ring Joint gasket is used for Class 900 gate valve; Pressurized
seal design is used for Class1500 Class2500 gate valve.
Packing Seal
API Flange size
Molded flexible graphite is used for packing material. PTFE or

combined packing material can be also used if being requested by
the customer. The internal surface of the stuffing box, of which area
is contacted with the packing, is of excellent finish (Ra3.2m). The
stem surface, contacting with the packing, should be rolled and
pressed after being precisely machined, so as to reach to the high
finish and compactness (Ra0.8m) and ensure the reliable tightness
of the stem area.
54-58
All our gate valves have the back seating design. In most cases,
the carbon steel gate valve is fitted with a renewable back seat. For
stainless steel gate valve, the back seat is machined directly in the
bonnet or is machined after welding. When the gate valve is at fully
open position, the sealing of the back seat can be very reliable.
However, as per the requirement of API 600, it is not advisable to
add or change packing by the mean of back seating when the valve
is Pressure containing.
Stem Design
The stem is of integral forged design. The minimum diameter
of the stem shall per the standard requirement. The connection
of the stem and disc is T type. The strength of the connecting area
is bigger than that of the T threaded part of the stem. The strength
test of that area conforms to API 591.
GENERAL VALVE
You are center of our world
01
JIS SERIES
Back Seating Design
DIN SERIES
01-07
API SERIES
API Gate Valve
Design and Manufacture: Cast steel gate valve to API600ISO

10434or API 6D; Cast stainless steel gate valve to API 603 or
API 600; Forged steel gate valve to API 602.Inspection and Test:
API 598, API 600 or API 6D.
End flange dimension: ASME B16.5for NPS24; ASME
B16.47 series B, API 605 or ASME B16.47 series A, MSS SP44for NPS24.
BW end dimension: ASME B16.25.
Socket-weld dimension: ASME B16.11.
Face to face and end to end: ASME B16.10.
Pressure-temperature ratings: ASME B16.34.
GENERAL VALVE
GENERAL VALVE
Body and Bonnet Connection

The body and bonnet of Class150Class900 gate valves are
usually connected with studs and nuts. And the body and bonnet
of Class1500Class2500 gate valves are usually of pressure seal
design.
Belleville Spring Loaded Packing

Impacting System
API600 Trim material
If being requested by the customer, the Belleville spring loaded

packing impacting system can be adopted for enhancing the durability
and reliability of the packing seal.
Design of Disc
Actuation
Hand wheel or gear box is usually used for gate valve actuation.
Chain wheel and electric actuator can be also used for gate valve
actuation if being requested by the customers.
Stem Nut
For carbon steel gate valve, the seat is usually forged steel. The
sealing surface of the seat is spray welded with hard alloy specified
by the customer. Renewable threaded seat is used for NPS 10
gate valves, and welded on seat can be also optional if being requested
by the customer. Welded on seat is used for NPS 10 carbon steel
gate valves. For Stainless steel gate valve, integral seat is usually
adopted, or to weld hard alloy directly integrally. Threaded or welded
on seat is also optional for stainless steel gate valve if being requested
by the customer.
Besides the common gate valves, We also makes cryogenic

gate valve, Jacketed Gate Valve, Bellow Sealed Gate Valve, Extension
Stem Gate Valve for underground application, Slat Gate Valve, etc.
No
13Cr
13 Cr
A182 F6a
18Cr-8Ni
18Cr-8Ni
A182 F304
25Cr-20Ni
25Cr-20Ni
A182 F310
Hard 13Cr
Hard 13Cr
A182 F6a
Stellite
Stellite
A182 F6a
13Cr
Cu-Ni Alloy
Monel
13Cr
Hard 13Cr
A182 F6a
Stellite
13Cr
A182 F6a
Cu-Ni Alloy
Cu-Ni Alloy
Monel
10
18Cr-8Ni-Mo
18Cr-8Ni-Mo
A182 F316
11
Cu-Ni Alloy
Cu-Ni Alloy
Monel
12
Stellite
18Cr-8Ni-Mo
A182 F316
13
19Cr-29Ni
19Cr-29Ni
20 Alloy
Part Name
No
Part Name
Body
Lantern Ring
15
Gland Nut
Bonnet
Backseat Bushing
16
Pin
Wedge
10
Nut
17
Stem Nut
Seating Ring
11
Bolt
18
Retaining Nut
No
Part Name
Body
Bonnet
3
4
5
Stem
Gasket
Graphite+SS304, PTFE
Stem Packing
Flexible Graphite
Lantern Ring
A182 F6a
A182 F304
A182 F304
A182 F316
Backseat Bushing
A182 F6a
A182 F304
A182 F304
A182 F316
Carbon Steel to ASTM

A216 WCB
Alloy Steel to ASTM
Stainless Steel to ASTM
A352 LCB
A351 CF8
A351 CF8M
A351 CF3
A351 CF3M
A216 WCB
A352 LCB
A351 CF8
A351 CF8M
A351 CF3
A351 CF3M
A217 WC6
A217 WC9
A217 C5
Wedge
A216 WCB
A352 LCB
A351 CF8
A351 CF8M
A351 CF3
A351 CF3M
A217 WC6
A217 WC9
A217 C5
Seating Ring
A105N
A350LF2
A351 CF8
A351 CF8M
A351 CF3
A351 CF3M
A182 F11
A182 F22
A182 F5
A182 F6a
A182 F304
A182 F304
A182 F316
A182 F304L
A182 F316L
A182 F304
A182 F304L
A182 F316L
A182 F304
A182 F304L
A182 F316L
A182 F304
10
Nut
A194 2H
A194 4
A194 8
11
Bolt
A193 B7
A320 L7
A193 B8
12
Gland
F6a
A182 F304
A182 F304
A182 F316
A182 F304L
A182 F316L
13
Gland Flange
A216 WCB
A352 LCB
A351 CF8
A351 CF8
A351 CF8
A351 CF8
14
Gland Eyebolt
A193 B7
15
Gland Nut
A194 2H
16
Pin
ANSI 1045
A217 WC6
A217 WC9
A194 7
A193 B16
A182 F304
A217 WC6
217 WC9
A193 B8
A193 B16
A194 8
A194 7
A182 F304
ANSI 1045
17
Stem Nut
A439 D2 / B148 952A
18
Retaining Nut
ANSI 1020
Stem
12
Gland
19
Nipple
19
Nipple
Copper Alloy
Gasket
13
Gland Flange
20
H.W.Lock Nut
20
H.W.Lock Nut
ANSI 1020
Stem Packing
14
Gland Eyebolt
21
Handwheel
21
Handwheel
A197
A217 C5
JIS SERIES
JIS SERIES
Special Gate Valve
Part Name
Stem & backseat

bushing
ASTM Material list of API600 Rising Stem Cast Steel Gate Valve
Seat
No
Wedge
seat surface
A217 C5
Suitable for H2S service and meet requirement of NACE MR 0175.
02
DIN SERIES
DIN SERIES
Usually, the stem nut is made of copper alloy. it is also can be

made of ASTM A439 D2 if being requested by the customer. For
large sized gate valves ( NPS 10 for Class 150, NPS 8 for Class
300, NPS 6 for Class 600, NPS 5 for Class 900), rolling bearing is
fitted at the two sides of the stem nut in order to minimize the open
and close torque of the gate valve.
Seat
ring surface
API SERIES
API SERIES
Gate Valves with NPS 2 are of wedge flexible gate;

Gate valves with NPS < 2 are of wedge solid gate.
Trim
code
03
GENERAL VALVE
GENERAL VALVE
Construction feature
Bolted bonnet
Fexible or solid wedge
Renewable seat
(Threaded or welded seat ring)
8" Yoke integral with bonnet
10" Spearete yoke bolted to bonnet
H(OPEN)
HOPEN
W1
API SERIES
API598 Pressure Test

Pressure ratingsClass300
Hydraulic Shell test7.8MPa
Hydraulic Seat test5.7MPa
Air test0.6MPa
d
Air test0.6MPa
d
API SERIES
Bolted bonnet
Renewable seat
W1
Main size of outside & weight

Class
L
NPS
DN
RF
RTJ
BW
H1
W1
Hand wheel
51
400
200
19
H1
W1
Hand wheel
Gear box
216
51
420
200
25
257
241
64
446
200
30
283
298
283
76
537
250
48
100
305
321
305
102
619
650
280
310
73
100
125
381
397
381
127
722
750
300
310
99
126
NPS
DN
RF
RTJ
BW
50
216
232
2 1/2
65
241
80
50
178
191
216
2 1/2
65
190
203
241
64
435
200
25
80
203
216
283
76
515
250
33
100
229
241
305
102
595
280
49
125
254
267
381
127
725
280
62
150
267
279
403
152
780
820
300
310
77
104
200
292
305
419
203
975
1020
350
310
123
150
150
403
419
403
152
806
835
350
310
130
186
10
250
330
343
457
254
1150
1200
400
310
188
215
200
419
435
419
203
1000
1030
400
310
208
235
12
300
356
368
502
305
1380
1430
450
310
288
315
10
250
457
473
457
254
1240
1280
450
310
334
386
14
350
381
394
572
337
1545
1580
500
310
385
435
12
300
502
518
502
305
1425
1460
500
310
450
502
16
400
406
419
610
387
1733
1780
500
460
500
552
18
450
432
660
500
460
601
14
350
762
778
762
337
1585
600
704
756
1915
653
460
438
1990
1620
445
20
500
457
470
711
489
2122
2220
600
460
764
816
16
400
838
854
838
387
1790
1830
500
460
923
965
24
600
508
521
813
591
2520
2600
600
460
1007
1185
18
450
914
930
914
438
1960
2000
650
460
1131
1224
28
700
610
623
914
684
3050
600
1880
20
500
991
1010
991
489
2158
2220
750
460
1345
1400
30
750
610
623
914
735
3130
600
2300
24
600
1143
1165
1143
584
2576
2620
900
600
2122
2385
32
800
660
673
965
779
3280
600
2550
28
700
1346
1372
1346
684
3080
600
3300
36
900
711
724
1016
874
3720
600
3390
1066
4100
4880
1397
1422
1397
735
3550
762
750
600
1000
30
3180
40
42
1050
787
1092
4300
5300
32
800
1524
1553
1524
779
3300
600
4400
48
1200
864
1168
5080
7520
36
900
1727
1756
1727
874
3760
600
6050
Class
300
05
JIS SERIES
JIS SERIES
04
Gear box
Weight(Kg)
Dimensions (mm)
Size
DIN SERIES
DIN SERIES
Class
Class
150

Weight (Kg)
Dimensions (mm)
Size
GENERAL VALVE
GENERAL VALVE
Bolted bonnet
Renewable seat
Bolted bonnet
Renewable seat
H(Open)
W1
H(open)
W1
Air test0.6MPa
Air test0.6MPa
d
API SERIES
API SERIES
Air test0.6MPa

L
NPS
RF
RTJ
BW
H1
W1
Gear box
50
292
295
292
51
444
200
32
2 1/2
65
330
333
330
64
500
250
52
80
356
359
356
76
558
585
280
310
60
87
100
432
435
432
102
665
695
300
310
107
125
508
511
508
127
760
790
350
310
150
559
562
559
152
868
900
450
200
660
664
660
200
1073
1110
500
10
250
787
791
787
248
1263
1300
12
300
838
841
838
298
1600
14
350
889
892
889
327
16
400
991
994
991
375
18
450
1092
1095
1092
20
500
1194
1200
24
600
1397
50
2 1/2
3
Class
L
NPS
DN
RF
RTJ
BW
H1
W1
Hand wheel
Gear box
50
368
371
368
47
510
280
70
2 1/2
65
419
422
419
57
560
300
110
134
80
470
473
470
70
620
670
350
310
175
202
175
227
100
546
549
546
92
728
770
400
310
270
300
310
216
268
125
673
676
673
111
870
920
450
310
378
405
310
399
451
650
460
605
657
150
705
711
705
136
1000
1070
500
460
520
575
1650
700
460
851
893
200
832
841
832
174
1130
1180
750
460
820
915
1705
1750
900
460
1177
1232
10
250
991
1000
991
222
1360
1410
900
600
1560
1750
1835
1900
900
460
1513
1568
12
300
1130
1146
1130
263
1620
600
2120
419
2020
600
1980
1194
464
2172
600
2460
14
350
1257
1276
1257
289
2020
600
2600
1407
1397
559
2650
600
3650
16
400
1384
1407
1384
330
2180
600
3450
368
371
368
47
500
280
70
50
451
454
451
35
530
580
280
310
100
130
65
419
422
419
57
550
280
110
2 1/2
65
508
514
508
47
580
630
300
310
150
180
80
381
384
381
73
610
660
300
310
140
167
100
457
460
457
98
702
750
350
310
200
227
80
578
584
578
57
650
700
350
310
245
275
125
559
562
559
121
850
900
400
310
258
285
100
673
683
673
73
750
800
400
310
390
420
150
610
613
610
146
980
1060
500
460
358
410
125
794
807
794
92
900
960
500
460
550
580
150
914
927
914
111
1040
1100
600
460
780
835
200
1022
1038
1022
146
1150
1200
750
460
1260
1355
10
250
1270
1292
1270
184
1400
1460
900
600
2380
2565
12
300
1422
1445
1422
219
1660
600
3250
200
737
740
737
190
1100
1140
650
460
550
600
10
250
838
841
838
234
1320
1370
700
460
1000
1100
12
300
965
968
965
282
1500
1560
900
460
1215
1310
14
350
1029
1038
1029
311
1900
1950
900
600
1600
1700
16
400
1130
1140
1130
354
2050
2100
900
600
2150
2330
06
Hand wheel
Class
1500
Class
2500
07
JIS SERIES
JIS SERIES
Class
900
DN
Weight(Kg)
Dimensions (mm)
Size
DIN SERIES
DIN SERIES
Class
Class
600
Weight(Kg)
Dimensions (mm)
Size
API Steel Globe Valve
GENERAL VALVE
GENERAL VALVE
Standards
Steel Globe Valve

General Valve
All our globe valves have the back seat design. In most cases,
the carbon steel globe valve is fitted with a renewable back seat.
For stainless steel globe valve, the back seat is machined directly
in the bonnet or is machined after welding. When the globe valve
is at fully open position, the sealing of the back seat can be very
reliable. However, as per the requirement of API, it is not advisable
to add or change packing by the mean of back seating when the
valve is pressure containing.
Seat
Bolted Bonnet; Outside Screw and Yoke; Rising stems; Metallic

seating surfaces.
The body and bonnet of Class150Class900 globe valves

are usually with studs and nuts. And the body and bonnet of
Class1500Class2500 globe valves are usually of pressure seal
design.
For carbon steel globe valve, the seat is usually forged steel. The
sealing surface of the seat is spray welded with hard alloy specified
by the customer. Renewable threaded seat is used for NPS10
globe valve and welded on seat can be also optional if being requested
by the customer. Welded on seat is used for NPS 12 carbon steel
globe valves. For stainless steel globe valve, integral seat is usually
adopted, or to weld hard alloy directly integrally. Threaded or welded
on seat is also optional for stainless steel globe valve if being requested
by the customer.
Gasket of Cover Flange
Stem Design
Stainless steel + flexible graphite wounded gasket is used for

Class150 and Class300 globe valve. Stainless steel + flexible
graphite wounded gasket is used for Class 600, and ring joint
gasket is also optional for Class600. Ring joint gasket is used
for Class900 globe valve. Pressurized seal design is used for
Class 1500Class2500 globe valve.
The stem is of integral forged design. The minimum diameter

of the stem shall per the standard requirement.
DIN SERIES
Actuation
Stem Nut
Usually, the stem nut is copper alloy. It is also can be made of
ASTM A439 D2 if being requested by the customer. For large sized
globe valve, rolling bearing is fitted at the two sides of stem nut in
order to minimize the open and close torque of the globe valve.
Special Globe Valve
Packing Seal
Besides the common globe valves, we also makes cryogenic

globe valvebellow sealed globe valveJacketed globe valve,
etc.
Belleville Spring Loaded Packing Impacting System

If being requested by the customer, the Belleville spring loaded
packing impacting can be adopted for enhancing the durability and
reliability of the packing seal.
No
Part Name
JIS SERIES
JIS SERIES
Hand wheel, impact hand wheel & gear box is usually used
for globe valve actuation. Chain wheel and electric actuator can be also
used for globe valve actuation if being requested by the customers.
Molded flexible graphite is used for packing material. PTFE or

combined packing material can be also used if being requested by
the customer. The internal surface of the stuffing box, of which area
is contacted with the packing, is of excellent finish (Ra 3.2m). The
stem surface, contacting with the packing, should be rolled and
pressed after being precisely machined, so as to reach to the high
finish and com-pactness (Ra 0.8m) and ensure the reliable
tightness of the stem area.
DIN SERIES
The features of globe valve
08
Back Seating Design
API SERIES
API SERIES
Design and Manufacture: Cast steel globe valve to BS 1873

and ASME B16.34Forged steel globe valve to API 602.
Inspection and Test: API 598.
End flange dimension: ASME B16.5.
No
Part Name
No
Part Name
19
Gland Nut
Body
10
Lantern Ring
Bonnet
11
Thrust Washer
20
Pin
Disc
12
Nut
21
Stem Nut
Seating Ring
13
Bolt
22
Bearing
Gasket
14
Anti-rotating Device
23
Retaining Nut
Stem
15
Screw
24
Nipple
Disc Nut
16
Gland
25
Bevel gearbox
Backseat Bushing
17
Gland Flange
18
Gland Eyebolt
Stem Packing
09
GENERAL VALVE
GENERAL VALVE
Bolted bonnet
Flat or plug type disc
Renewable seat
10" Thrust bearing design
Stem & backseat

bushing
13Cr
13 Cr
A182 F6a
18Cr-8Ni
18Cr-8Ni
A182 F304
25Cr-20Ni
25Cr-20Ni
A182 F310
Hard 13Cr
Hard 13Cr
A182 F6a
Stellite
Stellite
A182 F6a
13Cr
Cu-Ni Alloy
Monel
13Cr
Hard 13Cr
A182 F6a
Air test0.6MPa
Stellite
13Cr
A182 F6a
Cu-Ni Alloy
Cu-Ni Alloy
Monel
10
18Cr-8Ni-Mo
18Cr-8Ni-Mo
A182 F316
11
Cu-Ni Alloy
Cu-Ni Alloy
Monel
12
Stellite
18Cr-8Ni-Mo
A182 F316
13
19Cr-29Ni
19Cr-29Ni
20 Alloy
Wedge
seat surface
Seat
ring surface
Dimensions (mm)
Weight (Kg)
Alloy Steel to ASTM
No
Part Name
Body
Bonnet
A216 WCB
A352 LCB
A351 CF8
A351 CF8M
A351 CF3
A351 CF3M
A217 WC6
A217 WC9
A217 C5
Disc
A216 WCB
A352 LCB
A351 CF8
A351 CF8M
A351 CF3
A351 CF3M
A217 WC6
A217 WC9
A217 C5
Seating Ring
A105N
A350LF2
A351 CF8
A351 CF8M
A351 CF3
A351 CF3M
A182 F11
A182 F22
A182 F5
Gasket
A216 WCB
A352 LCB

A351 CF8
A351 CF8M
A351 CF3
A351 CF3M
A217 WC6
A217 WC9
Class
L
NPS
DN
A217 C5
RF
RTJ
BW
H1
W1
H.W
G.O
50
203
216
203
51
330
200
19
2 1/2
65
216
229
216
64
360
250
27
80
241
254
241
76
390
280
36
Stem
A182 F6a
A182 F304
A182 F304
A182 F316
A182 F304L
A182 F316L
A182 F304
Disc Nut
A182 F6a
A182 F304
A182 F304
A182 F316
A182 F304L
A182 F316L
A182 F304
Backseat Bushing
A182 F6a
A182 F304
A182 F304
A182 F316
A182 F304L
A182 F316L
A182 F304
100
292
305
292
102
445
300
53
Stem Packing
10
Lantern Ring
A182 F6a
A182 F304
A182 F304
A182 F316
A182 F304L
A182 F316L
A182 F304
125
356
369
356
127
480
350
75
11
Thrust Washer
A182 F6a
A182 F304
A182 F304
A182 F316
A182 F304L
A182 F316L
A182 F304
12
Nut
A194 2H
A194 4
150
406
419
406
152
520
556
350
310
94
126
13
Bolt
A193 B7
A320 L7
14
Anti-rotating Device
ANSI 1020
200
495
508
495
203
600
658
400
310
148
180
15
Gland
A194 2H
A194 8
16
Screw
F6a
10
250
622
635
622
254
773
805
450
460
242
291
17
Gland Flange
A216 WCB
300
698
711
698
305
955
500
460
438
480
A193 B8
880
Gland Eyebolt
A193 B7
12
18
19
Gland Nut
A194 2H
A194 8
A194 7
14
350
787
800
787
337
950
1100
600
460
600
20
Pin
ANSI 1045
A182 F304
ANSI 1045
21
Stem Nut
A439 D2/ B148 952A
16
400
914
927
914
387
996
1175
600
460
850
22
Bearing
23
Retaining Nut
ANSI 1020
20
500
978
991
978
488
1450
600
1650
24
Nipple
Copper Alloy
25
Bevel gearbox
24
600
1295
1308
1295
590
1690
600
2200
Flexible Graphite
A194 8
A194 7
A193 B8
A193 B16
A182 F304
ANSI 1020
A194 2H
A182 F304
A182 F304
A182 F316
A182 F304L
A182 F316L
A352 LCB
A351 CF8
A351 CF8
A351 CF8
A351 CF8
A182 F304
A217 WC6
10
Class
150
A217 WC9
A217 C5
A193 B16
11
JIS SERIES
JIS SERIES
DIN SERIES
DIN SERIES
Size
ASTM Material list of BS1873 Cast Steel Globe Valve

API SERIES
API SERIES
Trim
code
H(open)
GENERAL VALVE
GENERAL VALVE
Bolted bonnet
Renewable seat
W1
H(open)
Bolted bonnet
Renewable seat
Hydraulic Shell test15.6MPa23.3MPa
Hydraulic Seat test11.4MPa17.1MPa
Air test0.6MPa
Air test0.6MPa
API SERIES
API SERIES

Class
Class
NPS
2
2 1/2
3
DN
50
RF
RTJ
BW
267
283
267
51
385
H1
200
L
NPS
W1
H.W
G.O
25
65
292
308
292
64
420
200
42
80
318
333
318
76
440
280
46
100
356
371
356
102
515
350
74
125
400
416
400
127
580
350
111
150
444
460
444
152
660
690
400
310
165
195
200
559
575
559
203
900
950
550
460
275
327
Class
600
Class
300
10
250
622
638
622
254
950
990
600
460
400
452
H1
W1
H.W
G.O
292
51
360
250
32
333
330
64
410
280
42
359
356
76
465
300
63
RTJ
BW
50
292
295
65
330
80
356
100
432
435
432
102
545
575
400
310
107
138
125
508
511
508
127
625
660
500
310
185
215
150
559
562
559
152
785
820
550
460
290
342
650
460
540
645
200
660
664
660
200
930
960
8
2 1/2
2
50
368
371
368
47
480
350
55
65
419
422
419
57
520
350
68
80
381
384
381
73
564
630
400
310
95
128
450
310
160
210
Class
900
RF
100
457
460
457
98
685
720
125
559
562
559
121
780
840
550
460
270
325
150
610
613
610
146
950
1015
650
460
410
480
6
RTJ
DN
12
300
711
727
711
305
1030
1080
700
460
624
725
14
350
762
854
762
337
1130
1155
600
880
16
400
864
879
864
387
1310
1325
600
1300
18
20
450
500
977
1016
977
1016
431
482
1473
1574
12
720
720
1600
2100
Class
Class
1500
mm
in
D1
D2
n-d
DO
65
21/2
422
244
190.5
108.0
49.0
8-28.5
461
400
80
473
267
203.2
136.5
55.7
8-32
554
450
100
549
311
241.3
161.9
61.8
8-35
639
500
81.1
8-41
780
560
904
630
1140
680
125
676
375
292.1
193.7
150
711
394
317.5
211.1
92.1
12-38
200
841
483
393.7
269.9
103.0
12-44.5
13
JIS SERIES
JIS SERIES
21
2/2
DN
DIN SERIES
DIN SERIES
Weight (Kg)
Weight (Kg)
Dimensions (mm)
Size
Dimensions (mm)
Size
API Steel Check Valve
GENERAL VALVE
GENERAL VALVE
Reliable seat seal
General Valve
API SERIES
API SERIES
Steel Check Valve
Design and Manufacture: Cast steel check valve to BS1868,

ASME B16.34 and API 6D;
Forged steel check valve to API 602.
Inspection and Test: API 598 or API 6D.
End flange dimension: ASME B16.5for NPS24
ASME B 16.47 series B, API 605 or ASME B16.47
series A, MSS SP-44for NPS24.
Wall thickness dimension: API 600 and BS 1868.
Seat
DIN SERIES
DIN SERIES
For carbon steel check valve, the seat is usually forged Steel.
The sealing surface of the seat is spray welded with hard alloy
Specified by the customer. Renewable threaded seat is used for
NPS10 check valves, and welded on seat can be also optional if
being requested by the customer. Welded on seat is used for NPS
12 carbon steel check valves. For stainless steel check Valve,
integral seat is usually adopted, or to weld hard alloy directly integrally.
Threaded or welded on seat is also optional for stainless steel check
valve if being requested by the customer.
The features of check valve

Bolted Bonnet;
Swing and lift disc;
Metallic seating surfaces.
JIS SERIES
JIS SERIES
Body-To-Bonnet Joint
Stainless steel + flexible graphite wounded gasket is used for
Class150 and Class300 check valve; Stainless steel + flexible
graphite wounded gasket is used for Class600 check valve, and
joint gasket is also optional for Class600 check valve; Ring joint
gasket is used for Class900 check valve; Pressure seal design is
used for Class1500Class2500 check valves.

The body and bonnet of Class150Class900 check valves are
usually with studs and nuts. And the body and bonnet of Class1500
Class2500 check valves are usually of pressure seal design.
14
No
Part Name
No
Part Name
No
Part Name
Body
Yoke
11
Nut
Cover
Gasket
12
Bolt
Seat Ring
Disc Washer
13
Screw
Disc
Disc Nut
14
Lifting Lug
Hinge
10
Pin
15
API Steel Swing Check Valve
GENERAL VALVE
GENERAL VALVE
Wedge
seat surface
Hinge Pin
13Cr
13 Cr
A182 F6a
18Cr-8Ni
18Cr-8Ni
A182 F304
25Cr-20Ni
25Cr-20Ni
A182 F310
Hard 13Cr
Hard 13Cr
A182 F6a
Stellite
Stellite
A182 F6a
13Cr
Cu-Ni Alloy
Monel
13Cr
Hard 13Cr
A182 F6a
Stellite
13Cr
A182 F6a
Cu-Ni Alloy
Cu-Ni Alloy
Monel
10
18Cr-8Ni-Mo
18Cr-8Ni-Mo
A182 F316
11
Cu-Ni Alloy
Cu-Ni Alloy
Monel
12
Stellite
18Cr-8Ni-Mo
A182 F316
13
19Cr-29Ni
19Cr-29Ni
20 Alloy
Bolted cover
Renewable seat
Seat
ring surface

Pressure ratingsClass150, Class300
Hydraulic Shell test3.2MPa, 7.8MPa
Hydraulic Seat test2.2MPa, 5.7MPa
Air test0.6MPa
API SERIES
API SERIES
Trim
code

Class 150
ASTM Material list of BS1868 Swing Check Valve
L
NPS
Carbon Steel
to ASTM
Body
A216 WCB
A352 LCB
A351 CF8
A351 CF8M
A351 CF3
A351 CF3M A217 WC6
A217 WC9
A217 C5
Cover
A216 WCB
A352 LCB
A351 CF8
A351 CF8M
A351 CF3
A351 CF3M A217 WC6
A217 WC9
A217 C5
Seat Ring
A105N
A352 LF2
A351 CF8
A351 CF8M
A351 CF3
A351 CF3M
A182 F11
A182 F22
A182 F5
Disc
A216 WCB
A352 LCB
A351 CF8
A351 CF8M
A351 CF3
A351 CF3M A217 WC6
A217 WC9
A217 C5
Hinge
A216 WCB
A352 LCB
A351 CF8
A351 CF8M
A351 CF3
A351 CF3M A217 WC6
A217 WC9
A217 C5
Yoke
A216 WCB
A352 LCB
A351 CF8
A351 CF8M
A351 CF3
A351 CF3M A217 WC6
A217 WC9
A217 C5
Gasket
Disc Washer
A182 F6a
A182 F6a
A182 F304
A182 F316
A182 F304L A182 F316L
A182 F304
Disc Nut
A182 F6a
A182 F304
A182 F304
A182 F316
A182 F304L A182 F316L
A182 F304
10
Pin
A182 F6a
A182 F304
A182 F304
A182 F316
A182 F304L A182 F316L
A182 F304
11
Nut
A194 2H
A194 4
A194 8
A194 7
12
Bolt
A193 B7
A320 L7
A193 B8
A193 B16
13
Screw
193 B7
A320 L7
14
Lifting Lug
A182 F316
A182 F304L A182 F316L
A194 2H
16
A193 B16
RF
RTJ
BW
Weight
(Kg)
L
RF
RTJ
BW
Weight
(Kg)
50
203
216
203
51
132
15
267
283
267
51
144
20
1
2 /2
65
216
229
216
64
147
20
292
308
292
64
169
35
80
241
254
241
76
176
27
318
333
318
76
210
40
100
292
305
292
102
198
45
356
371
356
102
260
61
125
330
343
330
127
255
58
400
416
400
127
295
80
150
356
368
356
152
320
69
445
460
445
152
326
130
200
495
508
495
203
380
131
533
549
533
203
380
190
10
250
622
635
622
254
440
219
622
638
622
254
440
296
12
300
699
711
699
305
480
321
711
727
711
305
520
450
14
350
787
800
787
337
530
380
838
854
838
337
540
640
16
400
864
876
864
387
580
560
864
879
864
387
588
850
18
450
978
991
978
438
618
630
978
994
978
432
670
1030
20
500
978
991
978
489
657
770
1016
1035
1016
483
720
1330
24
600
1295
1308
1295
591
760
960
1346
1368
1346
584
850
1950
26
650
1295
1295
633
840
1250
1346
1372
1346
633
920
2300
28
700
1448
1448
684
920
1580
1499
1524
1499
684
1150
2600
30
750
1524
1537
1524
735
980
1950
1594
1619
1594
735
1260
3200
32
800
1727
1727
779
1016
2800
1727
1727
779
1380
3700
36
900
1956
1969
1956
874
1092
3200
2083
2083
874
1540
4300
17
JIS SERIES
JIS SERIES
Part name
DN
Alloy Steel to ASTM
No.
A182 F304
Class 300
DIN SERIES
DIN SERIES
Size
API Steel Swing Check Valve
API Steel Lift Check Valve
GENERAL VALVE
Bolted cover
Renewable seat
Bolted cover
Renewable seat
Class600900
15.6MPa23.3MPa
11.4MPa17.1MPa
Air test0.6MPa
15002500
38.8MPa63.8MPa
28.5MPa46.9MPa
Air test0.6MPa
Class 900
DN
L
RF
RTJ
BW
Class 900
H
Weight
(Kg)
L
RF
RTJ
BW
Size
H
Weight
(Kg)
50
292
295
292
51
170
28
368
371
368
47
200
48
21/2
3
65
330
333
330
64
178
40
419
422
419
57
220
75
80
356
359
356
76
246
68
381
384
381
73
280
95
100
432
435
432
102
290
117
457
460
457
98
320
135
125
508
511
508
127
320
155
559
562
559
121
360
200
150
559
562
559
152
360
192
610
613
610
146
400
264
200
660
664
660
200
430
340
737
740
737
190
480
424
10
250
787
791
787
248
502
515
838
841
838
234
560
730
12
300
838
841
838
298
554
750
965
968
965
282
632
1070
14
350
889
892
889
327
595
890
1029
1038
1029
311
680
1180
16
400
991
994
991
375
680
1303
1130
1140
1130
354
780
1790
Class 150
L
Class 300
Weight
(Kg)
108
13
76
117
19
76
140
127
25
140
153
140
165
178
165
50
203
216
65
216
80
100
NPS
DN
1/
2
3/4
RF
RTJ
BW
15
108
119
20
117
130
1
1/
1 4
1
1 /2
25
127
32
40
2
1/
2 2
Weight
(Kg)
152
13
78
178
19
82
216
203
25
102
216
229
216
32
106
11
229
242
229
38
118
13
15
267
283
267
51
140
26
162
22
292
308
292
64
164
33
76
168
28
318
333
318
76
178
50
102
194
42
356
371
356
102
195
86
127
210
60
400
416
400
127
223
120
RTJ
BW
152
162
178
191
98
203
32
102
38
115
203
51
140
229
216
64
241
254
241
292
305
292
125
356
368
356
18
450
1092
1095
1092
419
778
1800
1219
1232
1219
400
880
2500
20
500
1194
1200
1194
464
970
2150
1321
1334
1321
444
1050
3080
150
406
419
406
152
226
75
445
460
445
152
245
180
24
600
1397
1407
1397
559
1100
3200
1549
1568
1549
533
1200
4600
Size
Class 1500
L
Class 2500
L
Weight
(Kg)
RF
RTJ
BW
368
47
210
48
451
454
419
57
240
75
508
514
NPS
DN
RF
RTJ
BW
2
21/2
50
368
371
65
419
422
Weight
(Kg)
451
35
230
68
508
47
260
100
200
495
508
495
203
250
118
533
549
533
203
280
220
10
250
622
635
622
254
275
194
622
638
622
254
336
310
12
300
699
711
699
305
332
320
711
727
711
305
380
510
Weight
(Kg)
Size
Class600
NPS
DN
L
RF
RTJ
BW
Class900
L
Weight
(Kg)
RF
RTJ
BW
80
470
473
470
70
303
120
578
584
578
57
330
165
100
546
549
546
92
340
180
673
683
673
73
370
260
50
292
295
292
51
152
32
368
371
368
47
180
50
125
673
676
673
111
380
294
794
807
794
92
410
440
65
330
333
330
64
167
45
419
422
419
57
200
65
150
705
711
705
136
430
385
914
927
914
111
460
580
1
2 /2
3
80
356
359
356
76
178
68
381
384
381
73
235
88
200
832
841
832
174
500
634
1022
1038
1022
146
530
970
10
250
991
1000
991
222
590
1140
1270
1292
1270
184
620
1700
100
432
435
432
102
215
98
457
460
457
98
270
140
12
300
1130
1146
1130
263
660
1650
1422
1445
1422
219
690
2600
125
508
511
508
127
240
155
559
562
559
121
300
210
150
559
562
559
152
279
230
610
613
610
146
350
300
200
328
300
737
740
737
190
400
390
14
16
350
400
1257
1384
1276
1407
1257
1384
289
330
710
820
2000
2700
18
200
660
664
660
19
JIS SERIES
JIS SERIES
RF
DIN SERIES
DIN SERIES
NPS
Class 600
Size
API SERIES
API SERIES
GENERAL VALVE
GENERAL VALVE
General Valve
Standards
Fire safe design
Reliable stem seal
Design and Manufacture: API 6D, BS5351, ASME B16.34

API 608, MSS-SP-72
Face To Face Dimension: ASME B16.10
Flange Connection Dimension: ASME B16.5
BW Connection Dimension: ASME B16.25
Test And Inspection: API 598
Fire-safe Design: API 607/6FA
Anti-static Design&anti Blow-out Stem
With the valve heated in a fire application, the non-metal material

parts such as seat sealing ring of PTFE, stem back seat gasket, gland
packing, and the sealing gasket between body and bonnet might
disintegrate or be damaged due to high temperature. Our company specially
designed structure of auxiliary metal to metal seal is provided to effectively
prevent both internal and external leakage of the valve. As required by
custom ers, Our company floating ball valves with desi gn can meet
the requirement of API 607, API 6FA,BS 6755.
The blow-out proof design has been adopted for the stem to
ensure that even if the pressure in the body cavity is risen accidently
and the packing flange becomes invalid, the stem may not be blown
out by medium. The stem features the design with a backseat,
being assembled from underneath. The sealing force against the
backseat gets higher as the medium pressure becomes higher. So
the reliable seal of the stem can be assured under variable medium
pressure.
Application
Floating ball valves are suitable for various kinds of pipelines
of Class 150 to Class 1500, to turn on or off the pipeline medium,
of which the operation types include manual, worm gear and
pneumatic or electric actuators.
Stem assembled from underneath
may not be blown out by medium
API SERIES
API SERIES
Floating Ball Valve
GENERAL VALVE
Stem assembled downward

may be blown out
V type packing structure has been employed to effectively

transform the pushing force of the gland flange and the medium
pressure into the sealing force against the stem.
DIN SERIES
DIN SERIES
At lower medium pressure
At higher medium pressure
Reliable seat seal
Anti-static feature
The traditional packing flange design has been improved to be
of two piece structure, i.e., being as a packing flange plate and a
follower, the latter contacts the flange plate with spherical surface.
Thus, the follower remains vertical always, and is lined internally
with a PTFE bush to prevent the galling against and friction between
the stem, which can also reduce the operation torque of the valve.
Anti-Static design for ball valve 32mmAnti-Static design for ball valve 25mm
20
Packing before pressed
Packing after pressed
Wrong operation prevention
Fire safe design of valve body and bonnet flanges
Based on customers' requirement, a packing tightening design

may be employed to obtain more reliable stem packing seal, which
is loaded by bevelling spring.
The traditional packing flange design has been improved to be

of two piece structure, i.e., being as a gland flange and gland, the
latter contacts the gland flange with spherical surface. Thus, the
gland remains vertical always, and is lined internally with a PTFE
bush to prevent the galling against and friction between the stem,
which can also reduce the operation torque of the valve.
To prevent the ball valve from wrong operation, the keylock with
90of open and close positioning pad has been provided, Which
can be lockable as required. At the stem head, where the lever
fixes, a flat is designed so that the valve opens with the lever in
parallel to piping, and with the lever right-angled to the piping, the
valve is closed. So, it is ensured that the valve indicator of open
and close can never make mistake.
Mounting pad provided

Our company has provided
for floating ball valve with a
mounting pad , through which
it is easy to fix the actuators,
such as worm gear, pneumatic
and electric actuators.
90open & close
Lockable hole
Lockable hole
Stem
21
JIS SERIES
JIS SERIES
The structure design of elastic sealing ring has been adopted for
floating ball valves. This seat design features a bigger sealing pressure
ratio between the ring surface and the ball when medium pressure
gets lower, where the contacting area is smaller. Thus, the reliable
seal is ensured. When the medium pressure gets higher, the contacting
area between seat ring and ball becomes bigger as the sealing ring
transforms elas tically to undertake the bi gger force pushe d by the
medium without any damage.
GENERAL VALVE
GENERAL VALVE
Close joint and no leakage at middle flange
Anti-static and blow-out proof stem
Fire-safe design Split body
Locking device ISO5211 mounting pad
P3
P2
B0
L1
M0
P1
B
M
Air test0.6MPa
API SERIES
API SERIES
Pressure
Part Name
Body
A216 WCB
A352 LCB
A351 CF8
A351 CF8M
A351 CF3
A351 CF3M
Bonnet
A216 WCB
A352 LCB
A351 CF8
A351 CF8M
A351 CF3
A351 CF3M
Ball
A351 CF8
A352 LCB
A351 CF8
A351 CF8M
A351 CF3
A351 CF3M
Stem
A182 F6a
A182 F304
A182 F304
A182 F316
A182 F304L
A182 F316L
Seat ring
PTFE, RTFE, PEEK, DELRIN
Gasket
O-ring
Fluororubber
Bolt
A193 B7/B7M
A193 L7/L7M
A193 B8/B8M
Nut
A194 2H/2HM
A194 4/4M
194 8/8M
10
Small spring
SS304
11
Small ball
SS304
12
Thrust washer
PTFE
13
Stem packing
Flexible Graphite/PTFE
14
Packing gland
15
Shaft sleeve
16
Screw
17
Positioning plate
Galvanized Steel
18
Rataining ring
Carbon Steel
19
Lever
Carbon Steel
20
Gasket
Carbon Steel
21
Screw
Carbon Steel
A216 WCB
A352 LCB
Butt
welding
Handoperated
Air driving and

hydraulic driving
Worm gear
Electric driving
Weight
(Kg)
A351 CF8
A351 CF8M
Class
150
A351 CF3
A351 CF8M
mm
in
L1
M0
B0
P1
P2
P3
H1
H0
RF
BW
15
1/2
108
140
59
130
200
122
326
136
2.3
20
3/4
117
152
63
130
204
126
326
136
2.5
25
127
165
75
160
257
162
347
181
4.5
3.8
32
1 1/4
140
178
95
230
245
169
420
181
5.2
4.3
40
1 1/2
165
190.5
95
230
264
169
420
181
5.8
50
178
216
107
230
340
209
426
257
472
377
190
15
12
65
2 1/2
191
241
142
400
370
239
426
257
486
391
190
20
17
80
203
283
152
400
389
258
490
257
579
484
190
25
21
100
229
305
178
650
594
337
523
287
595
500
190
40
36
125
356
381
252
1050
646
437
378
378
650
500
400
68
52
150
394
457
272
1050
292
400
646
437
378
378
739
589
400
97
93
200
457
521
342
1410
398
600
781
537
530
530
799
649
400
160
154
PTFE
A193 B7
A320 L7
A193 B8/B8M
22
Flange
23
JIS SERIES
JIS SERIES
No
Nominal
diameter
DIN SERIES
DIN SERIES
ASTM Material list of floating ball valve
GENERAL VALVE
GENERAL VALVE


P3
P2
Ho
Ho
B0

Butt
welding
Handoperated
Electric driving
Weight
(Kg)
Pressure
Nominal
diameter
Flange
Butt
welding
Handoperated
Air driving and

hydraulic driving
Worm gear
Electric driving
Weight
(Kg)
L1
M0
B0
P1
P2
P3
H1
H0
RF
BW
mm
in
L1
M0
B0
P1
P2
P3
H1
H0
RF
BW
15
1/2
140
140
59
130
200
122
326
136
2.5
2.1
15
1/2
165
165
59
160
200
122
326
136
7.5
20
3/4
152
152
63
130
204
126
326
136
3.5
20
3/4
190.5
190.5
63
160
204
126
326
136
10.5
8.7
25
165
165
75
160
257
162
347
181
5.5
4.8
25
216
216
75
230
257
162
347
181
14.5
11
32
1 1/4
178
178
95
230
245
169
420
181
7.6
5.9
32
1 1/4
178
178
95
230
245
169
420
181
16.1
13.1
1 1/2
190.5
40
1 1/2
241
241
95
400
264
169
420
181
18.5
14.7
50
292
292
167
400
340
209
426
257
472
377
400
38
31
65
2 1/2
330
330
180
650
379
248
426
257
599
449
400
56
49
80
356
356
198
650
292
400
452
295
490
257
599
449
400
66
58
100
432
432
198
1050
398
600
594
375
378
378
632
472
400
76
68
190.5
95
230
50
216
216
107
230
65
2 1/2
241
241
142
400
80
283
283
152
400
100
305
305
178
125
381
381
150
403
200
502
264
169
420
181
340
209
426
257
472
377
379
248
426
257
486
391
452
295
490
257
579
650
594
375
523
287
252
1050
646
437
378
403
272
1050
292
400
744
500
521
342
1410
398
600
920
615
190
10.5
8.7
20
17
190
25
22
484
190
31
28
595
500
190
52
48
378
650
500
400
78
71
378
378
739
589
400
118
105
150
559
559
400
800
650
425
378
378
650
430
400
530
530
799
649
400
200
660
660
430
800
680
485
530
530
710
490
400
Class
600
25
JIS SERIES
JIS SERIES
in
24
H1
Air driving and

hydraulic driving
Worm gear
mm
40
Class
300
Flange
DIN SERIES
DIN SERIES
Pressure
Nominal
diameter
P1
H1
Hydraulic test15.6MPa
Air test0.6MPa
M
L
M0
Air test0.6MPa
API SERIES
API SERIES
B0
L1
GENERAL VALVE
GENERAL VALVE
Standards
Trunnion Ball Valve

General Valve
Self-relief in the body cavity
Anti-static design
The ball of the trunnion ball valve gets close contact with each
other through the trunnion, adjusting cushion, and down-end cap,
the passage of static electricity thus forms together with the valve,
which may lead the static electricity caused by sparks generated
by friction between the ball and seat during on and off performance
to the ground to prevent the possible risk of fire or explosion.
As the liquid medium left in the body cavity gasifies due to

increased temperature, the pressure in the body cavity becomes
abnormally higher when the medium itself in the cavity would
propel the seat and self-relieves the pressure to ensure the safety
of valve.
API SERIES
API SERIES
Design and Manufacture: API 6D, BS5351, ASME B16.34

API 608, MSS-SP-72
Face To Face Dimension: ASME B16.10
End flange dimension: ASME B16.5(for NPS24); ASME
B16.47 series B, API 605 or ASME B16.47 series A, MSS SP44(for NPS24).
BW Connection Dimension: ASME B16.25
Test And Inspection: API 598
Fire-safe Design: API 607/6FA
Anti-static Design&anti Blow-out Stem
Urgent grease injection device

According to customers' requirement, the trunnion ball valves
made by Our company are provided with devices for urgent
grease injection, which are on both the stem and seat for the trunnion
ball valves of DN>150mm (NPS6), and in the body cavity for the
valve of DN<125mm. When the O ring of stem or the body seat ring
is damaged due to accident, the medium leakage between body
and stem can be prevented by injecting the sealing grease through
the device.
Fire safe design

With the valve heated in a fire application, the non-metal
material parts such as seat sealing ring of PTFE, O ring for the
stem, and sealing gasket for body and bonnet, might be damaged
due to high temperature. Our company special design of auxiliary
According to some special working conditions and customers'

requirement, We has provided the trunnion ball valve with the
metal to metal or the graphite seal is provited for the trunnion ball
valve to effectively prevent both internal and external leakage of
the valve. As required by customers, Our company fire safe
design for the trunnion ball valve meets the requirement of
API 607, API 6Fa, BS 6755.
Bi-sealing design structure, i.e. seat sealing in front of the ball and
seat sealing behind the ball, thus the reliable sealing of the valve is
ensured because the valve can perform normally even if one of
the effective sealing designs becomes lost due to the abnormal
In our company , trunnion ball valve features the front ball

sealing design structure. Each seat of the ball valve can separately
cut off the medium at both inlet and outlet of the valve to realize
double-block functions. When the ball valve is closed, body cavity
and two of the body ends can be blocked with each other even if
both the inlet and outlet are under pressure, when the medium
left in the body cavity might be bled through the relief valve.
condition.
Regarding the seat in front of the ball, the piston effect formed
by the area difference between D1 and D2 ,plus the pre-tightened
force of a spring would cause the seat in front of the ball by the
pressure difference of the medium before and after the valve to
JIS SERIES
JIS SERIES
Double-block and bleed functions
touch the ball closely to form the tightness, of which the sealing
force will become bigger as the pressure difference gets higher.

Regarding the seat after the ball, the piston effect formed by the
area difference between D2 and D3 ,plus the pretig-htened force of
a spring would cause the seat behind the ball to touch the ball closely
to form the tightness, of which the sealing force will become bigger
as the pressure difference gets higher.
Fire safe design of valve

body and bonnet flanges
Fire safe design of stem
Blow-out proof stem

Mounting pad provided
Blow-out proof structure is provided with for the stem, which is

positioned by the up-end cap and screw, being guaranteed not
Our company has provided for trunnion ball valve with a mounting
pad for fixing the actuators, such as worm gear, pneumatic, electric,
hydraulic, and pneumatic & hydraulic acturtors.
to be blown-out by the medium even if at abnormal risen

pressure in the cavity.
26
DIN SERIES
DIN SERIES
The Bi-sealing design structure, i.e. seat sealing

in front of the ball and seat sealing behind the ball
27
GENERAL VALVE
GENERAL VALVE
Fire-safe design Split body Locking device
Self-relieving seat Energency sealing device
ISO5211 mounting pad
P3
P2
L1
B0
M0
P1
Air test0.6MPa
API SERIES
API SERIES
ASTM Material list of cast steel trunnion mounted ball valve

No
Part Name

A182 F304
A182 F304
A351 CF8
A182 F304
A182 F316
A182 F304L
A182 F3316
A182 F304L
A351 CF8M
A351 CF3
A182 F316
A182 F304L
SS304 +Graphite, PDFE
A182 F316
A182 F304L
A182 F304
A182 F316
A182 F304L
A182 F304
PTFE, RTFE, PEEK, DELRIN
A182 F316
A182 F304L
A182 F304
Fluororubber
Flexible Graphite
A182 F316
A182 F304L
A182 F304
A193 B8/B8M
A194 8/8M
INCONEL X-750
A193 B8/B8M
PTFE
Cabon Steel
PTFE
PTFE Flexible Graphite
PTFE
A182 F316
A182 F304L
A182 F304
PTFE
A182 F316
A182 F304L
A182 F304
Carbon Steel
Carbon Steel
A182 F316
A182 F304L
A182 F304
A182 F316
A182 F304L
A182 F304
A182 F316
A182 F304L
A182 F304
A182 F316
A182 F304L
A182 F304
Carbon Steel
Carbon Steel
28
A182 F316L
A182 F316L
A351 CF3M
A182 F316L
A182 F51
A182 F51
CD4MCU
A182 F51
A182 F316L
A182 F316L
A182 F51
A182 F51
A182 F316L
A182 F51
A182 F316L
A182 F51
Class
150
A182 F316L
A182 F51
A182 F316L
A182 F51
A182 F316L
A182 F316L
A182 F316L
A182 F316L
A182 F51
A182 F51
A182 F51
A182 F51
Worm gear
mm
in
L1
M0
B0
P1
P2
P3
H1
H0
RF
BW
50
178
216
107
230
270
174
89
181
12
11
65
2 1/2
190.5
241
125
400
380
248
148
257
16
15
80
203
283
152
400
390
258
148
257
22
21
100
229
305
178
650
480
322
287
287
35
34
125
356
381
300
1050
555
395
287
287
58
55
150
394
457
330
1050
665
457
378
378
554
337
200
74
72
200
457
521
400
600
805
595
378
378
600
382
200
205
201
250
10
533
559
495
600
840
630
378
378
652
435
200
322
310
300
12
610
635
580
800
975
728
530
530
761
480
280
460
447
350
14
686
762
625
800
1130
883
530
530
771
520
280
576
536
400
16
762
838
670
800
1460
1154
680
680
831
580
280
864
814
450
18
864
914
698
800
1530
1224
680
680
921
670
305
1280
1210
500
20
914
991
840
800
1560
1294
680
680
943
770
305
1600
1500
600
24
1067
1143
1050
800
1145
915
1455
1455
1123
850
305
3540
3000
700
28
1245
1346
1100
800
1160
930
1455
1455
1218
945
400
4500
3710
800
32
1372
1524
1150
800
1460
1100
1665
1665
1328
1055
400
5940
4870
900
36
1524
1727
1230
800
1540
1180
1665
1665
1696
1130
460
7540
6010
1000
40
1753
1956
1320
800
1630
1280
1960
1960
1925
1240
460
9320
7400
Air driving and

hydraulic driving
Electric driving
29
JIS SERIES
JIS SERIES
A350 LF2
ASTM A105N
1
Body
A350 LF2
ASTM A105N
2
Bonnet
A351 CF8
A351 CF8
3
Ball
A182 F304
A182 F6a
4
Stem
5
Gasket
LF2+ENP
A105N+ENP
6
Seat
LF2+ENP
A105N+ENP
7
Clamping ring
8
Seat ring
LF2+ENP
A105N+ENP
9
Seat back
10
O-ring
11
Seat gasket
LF2+ENP
A105N+ENP
12
Stuffing box
A320 L7/L7M
A193 B7/B7M
13
Bolt
A194 4/4M
A194 2H/2HM
14
Nut
15
Spring
A320 L7
A193 B7
16
Screw
17
Gasket
18
Flat key
19
Shaft sleeve
20
Stem packing
21
Thrust washer
A350 LF2
ASTM A105N
22
Packing gland
23
Shaft sleeve
A350 LF2
ASTM A105N
24
Support plate
25
Yoke
26
Pin
A350 LF2
ASTM A105N
27
Small check valve
Garbon steel
Garbon steel
28
Grease injector
Garbon steel
Garbon steel
29
Vent plug
Garbon steel
Garbon steel
30
Drain plug
31
Lifting lug
32
Support feet
Weight
(Kg)
Butt
HandNominal
Flange
welding operated
diameter
DIN SERIES
DIN SERIES
Pressure
GENERAL VALVE
GENERAL VALVE
Close joint and no leakage at middle flange;

Anti-static and blow-out proof stem;
Fire-safe design; Split body; Locking device;
Self-relieving seat; Energency sealing device
ISO5211 mounting pad.

Self-relieving seat; Energency sealing device;
H0
L1
B0
P3
P2
H0
B0
M0

Weight
(Kg)
Weight
(Kg)
Worm gear
BW
mm
in
L1
M0
B0
P1
P2
P3
H1
H0
RF
BW
15
11
50
292
292
110
230
270
210
150
257
35
29
24
18
65
2 1/2
330
330
155
400
38
31
30
22
80
356
356
200
400
520
295
287
287
55
45
55
45
100
406
406
235
600
640
325
287
287
102
78
378
87
69
150
495
495
300
800
730
390
378
378
554
337
200
232
182
378
378
554
337
200
118
98
200
597
597
375
800
840
530
378
378
600
382
200
390
310
530
378
378
600
382
200
255
225
250
10
673
673
445
800
1015
700
530
530
652
480
200
710
590
736
700
530
530
652
435
200
370
330
300
12
762
762
515
800
1120
750
530
530
761
520
280
960
790
800
945
750
530
530
761
480
280
533
493
350
14
826
826
550
800
1225
885
680
680
771
594
280
1700
1490
625
800
995
885
680
680
771
520
280
640
600
400
16
902
902
800
831
580
280
1030
930
680
1720
680
680
1970
680
1080
280
975
1480
632
1280
831
800
615
670
698
800
1480
1080
680
680
921
670
305
1540
1400
450
18
978
978
750
800
921
670
305
2180
1830
991
840
800
1555
1155
1455
1455
943
770
305
2100
1900
500
20
1054
1054
810
800
1480
1080
680
680
943
770
305
3250
2770
1143
1143
1050
800
1380
930
1455
1455
1123
850
305
3430
2860
600
24
1232
1232
1050
800
1365
915
1665
1665
1123
850
305
4880
4030
28
1346
1346
1100
800
1430
980
1665
1665
1218
945
400
4960
4140
700
28
1397
1397
1100
800
1430
980
1665
1665
1218
945
460
6700
5610
800
32
1524
1524
1150
800
1750
1150
1665
1665
1328
1055
400
6760
5640
800
32
1651
1651
1180
800
1328
1055
460
8470
7060
900
36
1727
1727
1230
800
1540
1180
1960
1960
1696
1130
460
9640
8040
900
36
1880
1880
1275
800
1815
1130
600
12080 10070
1000
40
2083
2083
1320
800
1630
1280
1960
1960
1925
1240
460
11730
9680
1000
40
2300
2300
1370
800
1925
1240
600
15420 12850
Worm gear
mm
in
L1
M0
B0
P1
P2
P3
H1
H0
RF
50
216
216
107
230
270
210
148
181
65
2 1/2
241
241
125
400
380
250
148
257
80
283
283
152
400
390
295
287
287
100
305
305
178
650
455
325
287
287
125
381
381
300
1050
580
390
378
150
403
403
330
1050
595
390
200
502
521
400
600
595
250
10
568
559
495
600
300
12
648
635
580
350
14
762
762
400
16
838
838
450
18
914
914
500
20
991
600
24
700
Air driving and

hydraulic driving
Electric driving
Pressure
Class
600
Air driving and

hydraulic driving
Electric driving
31
JIS SERIES
JIS SERIES
Butt
HandNominal
Flange
welding operated
diameter
Butt
HandNominal
Flange
welding operated
diameter
30
DIN SERIES
DIN SERIES
Class
300
H1
P
L
Pressure
P1
H1
Air test0.6MPa
API SERIES
API SERIES
Air test0.6MPa
GENERAL VALVE
GENERAL VALVE


P3
P2
L1
B0
H0
L1
B0
M0
M0
H1

Weight
(Kg)
Butt
HandNominal
Flange
welding operated
diameter
Worm gear
mm
in
L1
M0
B0
P1
P2
P3
H1
H0
RF
50
292
292
110
650
270
210
150
257
65
2 1/2
330
330
155
650
80
356
356
200
650
520
295
287
287
100
432
432
235
600
640
480
287
287
150
559
559
300
800
730
520
378
200
660
660
375
800
840
595
250
10
787
787
445
800
1015
300
12
838
838
515
800
350
14
889
889
550
400
16
991
991
450
18
1092
1092
500
20
1194
1194
600
24
1397
700
28
800
Weight
(Kg)
Butt
HandNominal
Flange
welding operated
diameter
Worm gear
BW
mm
in
L1
M0
B0
P1
P2
P3
H1
H0
RF
BW
50
40
50
368
368
220
650
520
295
287
287
50
40
75
60
65
2 1/2
419
419
240
650
75
60
92
70
80
381
381
260
650
730
520
378
378
117
82
146
109
100
457
457
300
600
845
595
530
530
600
382
200
216
150
378
600
382
200
339
264
530
530
652
480
200
640
540
150
610
610
365
800
1015
770
530
530
761
520
280
532
414
770
530
530
761
520
280
960
800
200
737
737
395
800
1120
815
680
680
771
594
280
870
677
1120
810
680
680
771
594
280
1330
1110
250
10
838
838
505
800
1225
1005
1445
1445
831
632
280
1467
1132
800
1225
1005
1445
1445
831
632
280
1640
1370
300
12
965
965
575
800
1375
1155
1445
1445
921
670
305
2270
1777
615
800
1375
1155
1445
1445
921
670
305
2240
1910
350
14
1029
1029
675
800
1490
1210
1665
1665
943
770
305
3240
2590
750
800
943
770
305
2770
2310
400
16
1130
1130
765
800
1615
1335
1665
1665
1123
850
305
4645
3780
810
800
1490
1210
1665
1665
1123
850
305
3740
3120
450
18
1219
1219
870
800
1760
1410
1960
1960
1218
945
400
6035
4810
1397
1050
800
1615
1335
1665
1665
1218
945
400
5560
4640
500
20
1321
1321
895
800
1760
1410
1960
1960
1328
1055
400
8077
6555
1549
1549
1180
800
1760
1410
1960
1960
1328
1055
400
8070
6730
32
1778
1778
1250
800
1458
1135
600
11000
9170
600
24
1549
1549
960
800
1760
1410
1960
1960
1458
1135
600
12357
9900
900
36
2083
2083
1315
800
1855
1170
600
15700 13090
700
28
1780
1700
1210
800
1904
1180
600
1000
40
2337
2337
1420
800
1960
1285
600
20040 16700
800
32
2050
1780
1290
1000
1984
1260
600
Air driving and

hydraulic driving
Electric driving
32
Pressure
Class
1500
Air driving and

hydraulic driving
Electric driving
33
JIS SERIES
JIS SERIES
Class
900
DIN SERIES
DIN SERIES
Pressure
P1
M
L
Air test0.6MPa
API SERIES
API SERIES
Air test0.6MPa

P
API Butterfly Valve
API Butterfly Valve
GENERAL VALVE
GENERAL VALVE
General Valve
A- A
a
Bo dy
Valve Shaft Centerline
Sealing Ring
A
Disc Centerline
Sealing Ring
Body
Body
Multilayer Hard Seal Structure
J-typ e metal sealing ring. It is applicable and double eccentric

butt erf ly val ves. pressur e ratingCLASS 300. Provi ded with
Body Centerline
Sealing Section
Sealing Ring
2. Elastic ring hard seal structure(see fig right)is of the structure of
Disc
fireproof structure to adapt to conditions with great temperature

changes, it is featured by outstanding seal, long service life and
easy workmanship.
Close State Diagram of Triple

Eccentric Seal Butterfly Valve
Open State Diagram of Triple

Eccentric Seal Butterfly Valve
Disc
Sealing Principle of Triple Eccentric Seal Butterfly Valve
Sealing Ring
Body
Butterfly valves are used to open and close(seal type)or adjust

the medium flow in pipes in the fields of foodstuff, drinks, chemical,
industrial water treatment, high-rise constructions, water supply and
drainage etc, They are mainly structured as following
Elastifc Ring Hard Seal Structure
1Simple structure, small sizes, light weight and low installation

dimensions. According to the types of body connection, they are
basically classified to wafer type(including lug wafer type), flanged
and welded
Di sc
Sealing Ring
A
Body
Disc
3. When butterfly valve is fully opened, flow resistance is low.

When partially opened, it may carry out sensitive flow control.
DIN SERIES
DIN SERIES
A-A
a
Disc
API SERIES
API SERIES
Butterfly Valve
The rotation center of disc(namely the center of valve shaft)and

the centerline of body form up abeccentric on the base of single
eccentric butterfly valveMaking the sealing face of disc disengaged
from seat seali ng face more quickl y than single eccentri c seal
butterfly valves during the process of open and close Once disc turns
to 812. the disc sealing face will be completely disengaged
from the seat seali ng faceOnce fully open eda gap 'YwilI
be formed up between the two sealing facesThis type of butterfly
valves are designed to have greatly lowered the mechanical wear
and extrusion deformation between the two sealing facesmaking
the sealing performance of butterfly valve much better
The character rustic of this structure is to make stem axis not only
deviated from the center of disc, but also the center of the body.
The effect of double eccentric is thatwhen valve has been opened,
disc can be quickly disengaged from seat, thus to greatly eliminate
the unnecessary excessive extrusion and scratch between the disc
and seatreduce opening resistancelower the abrasion and improve
the service life of seatAs scratch has been greatly Lowered, metal
seat can be used for double eccentric butterfly valve, so that butterfly
valves are able to be used in high temperature fields. However, as
its seal is positioned sealing constructioni.ethe sealing faces
disc and seat is lineaI contact, disc extruding seat to produce elastic
deformationthus to effect the sealing perforce has high requirement
on close position, especially for lhasa with metal seat and is given
poor pressure enduranceThis is why butterfly valves are
conventionallVnot resistant to high temperature and leakage
Our butterfly valves are structured to centered seal,

single eccentric seal, double eccentric seal, triple eccentric
seal and variable eccentric seal. The sealing principles of
these structures are stated as following.
inward compressive stress at short shaft The long and short shafts
produce elastic deformation of different directions, thus to maximizing
the sealing force between the sealing faces of valve.
This distinctive eccentric combination not only uses cam effect,
but also eliminates friction completely, thus to ensure no friction
between seat and sealing ring on disc during the 90 stroke of
valve, a perfect solution to clear away the possibilities of abrasion
and leakage.
Sealing Principle of Double Eccentric SeaI Butterfly Valve
4. Low driving moment, easy and quick operation
Valve Shaft Centerline

Body Centerline
A
Body Centerline
Sealing Section
JIS SERIES
JIS SERIES
Sealing Structure of Double Eccentric Seal Butterfly Valve
Sealing Principle of Triple Eccentric SeaI ButterflY Valve

A B eccentric is formed up between the centerline of seat and
the centerline of body on the base of double eccentric butterfly
valve, making disc sealing face immediately disengaged from seat
sealing face upon the opening of butterfly valve, and in close
contact with the seat sealing face upon closing. When fully opened,
a gap 'Y', which is the same as that in double eccentric seal butterfly
valve, is formed up between the two sealing faces. The design of
this type of valves has thoroughly eliminated the mech-anical wear
and scratch between the two sealing faces, making the sealing
performance and service life of butterfly valves greatly improved.
When valve is closed, with sealing ring under the extrusion of body
sealing face and disc, two upward elastic deformations are produced.
the sealing face is fallen under outward tension at long shaft and
34
Flanged
Connection
Butt-welded
Connection
Wafer
Connection
Lug Wafer
Connection
1. Multilayer Hard Seal Structure(See figright)

Multilayer hard seal structure is applicable. double and triple
eccentric butterfly valves, pressure ratingCLASS 600And triple
eccentric butterfly valve can maintain twoway Ieaktightness.
Multilayer sealing ring is composite of stainless steel and nonmetal
material. The nonmetal material can be flexible graphitePTFE
or non asb estos materi al et c. acco rdi ng to the actua l wo rki ng
conditions
35
API Butterfly Valve
API Triple Offset Wafer Butterfly Valve
GENERAL VALVE
GENERAL VALVE
Th e Tripl e Of fse t Geo met ry
A2
B2
B1
B3
Worm Gear Driven Lug Butterfly Valve
AS TM Materi als list of Butterf ly Valve
Part Name
Carb on Ste el to ASTM
Worm gear
NP S
Ho3
Electric Wafer Butterfly Valve
Hydraulic Wafer Butterfly Valve
Main size of Wafer Butterfly Valve outside & weight
CLASS 150
Sta inless Ste el to ASTM
Air driving and hydraulic driving
El ect ric dr ivi ng
wei ght (kg)
L
H3
Ho3
B3
H1
Ho1
B1
A1
Do 1
H2
Ho2
B2
A2
Waf er
Lug
Body
A216 WC B
A351 CF 8
A351 CF8M
3"
49
320
185
140
63
160
513
263
178
180
Key
A182 F6a
SS304
SS316
4"
54
342
195
140
63
160
535
282
178
180
11
14
2a
Pin
A182 F6a
SS304
SS316
5"
57
365
209
140
63
300
563
293
178
180
15
18
Stem
A182 F6a
A182 F304
A182F316
6"
58
415
243
140
63
300
602
322
178
180
17
20
Disc
A216 WC B
A351 CF 8
A351 CF8M
8"
64
690
323
275
510
263
150
84
400
745
296
235
370
25
31
Seal Ring
Gr aphite+304
Gr aphite+SS304
Gr aphite+SS316
10"
71
750
355
275
567
295
150
84
400
805
325
235
370
40
49
Retainer Flange
A216 WC B
SS304
SS316
12"
81
955
475
378
665
342
200
108
600
883
365
235
370
61
79
BoIt
A193 B7
A193 B8
A193 B8M
14"
92
1032
513
378
739
385
200
108
600
965
408
235
370
82
107
Bolt
A193 B7
A193 B8
A193 B8
16"
102
1182
598
530
825
430
240
152
600
1033
443
235
370
123
150
Cover
A105
A182 F304
A182 F316
18"
114
1265
635
530
910
469
240
152
800
1120
485
235
370
150
182
10
Ga sket
Gr aphite
PTFE
PTFE
20"
127
1335
667
530
990
500
300
168
800
1186
518
235
370
204
253
11
Bushing
PTFE+Bronze
PTFE+Bronze
PTFE+Bronze
24"
154
1642
830
680
1210
618
320
192
800
1380
625
235
370
300
398
12
Bushing
PTFE+Bronze
PTFE+Bronze
PTFE+Bronze
30"
167
1823
1245
680
1453
875
512
279
400
1583
1005
245
515
454
490
13
Packing Seat
SS
SS304
SS316
36"
184
2145
1329
860
1775
939
512
279
400
1905
1089
245
515
762
771
14
Packing
Gr aphite
PTFE
PTFE
40"
217
2235
1488
860
1857
1005
512
279
400
2010
1110
360
540
975
1179
15
Bolt
A193 B8
A193 B8
42"
222
2360
1456
860
1980
1086
512
279
400
2120
1216
360
540
1234
1338
16
Packing Bushing
SS
46
254
2445
1505
1080
2070
1110
570
368
600
2175
1260
360
540
1451
1724
17
Nut
48"
254
2535
1564
1080
2165
1194
570
368
600
2235
1324
360
540
1678
1928
18
Bolt
54"
305
2382
1477
630
425
800
2412
1503
445
628
2223
2634
19
Yoke
Carbon Steel
60"
333
2684
1617
630
425
800
2699
1687
445
628
2903
3447
36
37
JIS SERIES
JIS SERIES
DIN SERIES
DIN SERIES
No.
H3
H2
H1
API SERIES
API SERIES
Ho1
Ho2
Do1
A1
GENERAL VALVE
GENERAL VALVE
A2
B2
B1
B3
B3
H1
Worm gear
Ho3
B3
H1
Ho1
B1
A1
Do1
H2
Ho2
B2
A2
Waf er
Lug
Ho3
wei ght (kg)
L
H3
Ho3
B3
H1
Ho1
B1
A1
Do1
H2
Ho2
B2
A2
Waf er
Lug
49
320
185
140
63
160
513
263
178
180
13.5
15.5
6"
78
415
243
140
63
300
602
322
178
180
45
56
4'
54
342
195
140
63
160
535
282
178
180
18
21
8"
102
750
368
275
510
263
150
84
400
745
296
235
370
70
94
5"
57
365
209
140
63
300
563
293
178
180
24
28
10"
117
909
442
378
567
295
150
84
400
805
325
235
370
103
141
6"
59
415
243
140
63
300
602
322
178
180
28
34
12"
140
1075
535
530
665
342
200
108
600
883
365
235
370
149
201
8"
73
750
368
275
510
263
150
84
400
745
296
235
370
49
60
14"
155
1158
572
530
739
385
200
108
600
965
408
235
370
243
333
10"
83
909
442
278
567
295
150
84
400
805
325
235
370
68
88
16"
178
1230
610
530
825
430
240
152
600
1033
443
235
370
318
401
12"
92
1075
535
530
665
342
200
108
600
883
365
235
370
109
117
18"
200
910
469
240
152
800
1120
485
235
370
431
575
14"
117
1158
575
530
739
385
200
108
600
965
408
235
370
186
207
20"
216
990
500
300
168
800
1186
518
235
370
472
708
16"
133
1230
610
530
825
430
240
152
600
1033
443
235
370
264
308
24"
232
1210
618
320
192
800
1380
625
235
370
826
1061
18"
149
1462
736
680
910
469
240
152
800
1120
485
235
370
297
408
20"
159
1328
765
680
990
500
300
168
800
1186
518
235
370
363
468
24"
181
1210
618
320
192
800
1380
625
235
370
454
748
30"
254
1937
1180
512
279
600
1516
716
360
540
816
1338
36"
305
2198
1298
570
368
600
1669
794
360
540
1429
2154
42"
324
2318
1358
570
368
600
1914
914
360
540
2155
2427
38
39
JIS SERIES
JIS SERIES
3"
DIN SERIES
DIN SERIES
H3
Worm gear
wei ght (kg)
NPS
CLASS 600
H3
H2
Ho1
Ho3
CLASS 300
NPS
H3
H2
H1
Ho2
Do1
A1
API SERIES
API SERIES
Ho1
Ho2
Do1
A2
B2
B1
A1
API Triple Offset Flange Butterfly Valve
GENERAL VALVE
GENERAL VALVE
A3
F2
E2
H1
Ho3
H3
Ho2
Ho1
Ho3
H3
Ho2
H1
Hydraulic Flanged Butterfly Valve
Electric driving
Worm gear
we ight(kg)
NP S
H1
Ho1
E1
F1
W1
H2
Ho2
E2
F2
H3
Ho3
A3
Worm gear
Air driving and

hydraulic driving
Electric driving
Worm gear
L
weight(kg)
H1
Ho 1
E1
F1
W1
H2
Ho 2
E2
F2
H3
Ho 3
A3
Worm gear
3"
114
472
350
50
203
203
513
263
180
178
15.4
2"
10 8
36 5
23 7
35
16 9
15 2
40 7
23 7
18 0
17 8
19
4"
127
520
386
60
191
203
535
282
180
178
23
3"
11 4
37 8
25 3
73
22 9
15 2
53 0
25 3
18 0
17 8
29
5"
140
580
395
60
215
250
563
293
180
178
29
4"
12 7
42 1
27 4
73
22 9
30 5
55 2
27 4
18 0
17 8
39
6"
140
653
475
67
289
305
602
322
180
178
33
5"
14 0
48 2
31 2
73
22 9
30 5
58 0
31 0
18 0
17 8
48
323
275
152
773
565
67
308
460
745
296
370
235
50
6"
14 0
54 3
35 1
10 8
25 4
30 5
61 0
35 1
18 0
17 8
54
10"
165
880
640
86
346
460
805
325
370
235
750
355
275
73
8"
15 2
62 8
39 2
10 8
25 4
30 5
75 5
39 2
37 0
23 5
75 0
36 8
27 5
84
12"
178
989
711
111
403
610
883
365
370
235
955
475
378
108
10 "
16 5
85 5
48 0
13 3
30 5
61 0
81 6
48 0
37 0
23 5
90 9
44 2
37 8
11 8
14"
190
1044
760
60
601
356
965
408
370
235
1032
513
378
143
12 "
17 8
81 2
51 5
13 3
30 5
61 0
91 2
51 5
37 0
23 5
10 75
53 5
53 0
17 0
16"
216
1142
826
60
605
457
1033
443
370
235
1182
598
530
186
55 5
19 4
35 6
61 0
98 0
55 5
37 0
23 5
11 58
57 2
53 0
23 1
887
60
652
610
1120
485
370
235
530
88 5
1228
635
19 1
222
1265
14 "
18"
234
59 0
19 4
35 6
35 6
10 57
59 0
37 0
23 5
12 30
61 0
53 0
29 9
959
60
805
762
1186
518
370
235
530
95 1
1337
667
21 6
229
1335
16 "
20"
277
24"
267
1554
1109
103
763
762
1380
625
370
235
1642
830
680
408
18 "
22 5
11 06
63 6
19 4
35 6
35 6
11 40
63 6
37 0
23 5
14 62
73 6
68 0
39 0
28"
292
1456
956
245
400
315
1587
745
515
245
1711
859
680
653
20 "
22 9
13 08
68 5
19 4
35 6
35 6
12 43
68 5
51 5
24 5
13 28
76 5
68 0
49 9
30"
308
1541
991
310
460
400
1650
777
515
245
1782
910
680
816
24 "
26 7
14 45
93 4
16 5
68 6
68 6
14 20
93 4
81 7
35 1
72 6
32"
318
1611
1036
310
460
400
1717
810
515
245
1856
942
680
914
28 "
29 2
14 95
10 39
16 5
68 6
68 6
18 12
10 39
81 7
35 1
13 60
36"
330
1743
1103
410
480
400
1870
875
540
360
1920
975
680
1157
30 "
29 2
15 35
10 60
16 5
68 6
68 6
19 06
10 60
81 7
35 1
14 29
40"
410
1868
1173
410
480
400
2030
965
540
360
1610
32 "
31 8
15 75
11 20
16 5
68 6
68 6
20 21
11 20
81 7
35 1
17 57
33 0
16 05
11 90
16 5
68 6
68 6
23 27
11 90
97 3
44 0
22 23
44"
450
1968
1223
410
480
400
2078
1022
540
360
2160
36 "
48"
470
2145
1320
520
640
400
2188
1100
540
660
2359
40 "
41 0
17 55
12 34
16 5
68 6
68 6
24 51
12 34
97 3
44 0
25 31
52"
490
2300
1405
520
640
400
2214
1150
565
385
2720
42 "
43 0
21 00
13 85
42 9
80 5
90 3
25 15
13 85
97 3
44 0
27 81
56"
530
2440
1475
520
640
400
2328
1325
565
385
3353
44 "
45 0
21 75
14 36
42 9
80 5
90 3
25 65
14 36
97 3
44 0
29 79
385
3629
48 "
47 0
23 03
15 70
39 9
96 5
90 3
26 97
15 70
97 3
44 0
36 02
60"
570
2594
1559
450
785
630
2530
1515
565
Structural length of valve in the table: DN2000, to ISO5752 13series; DN2000, to ISO5752 14 series.
40
Structural length of valve in the table: DN2000, to ISO5752 13series; DN2000, to ISO5752 14 series.
41
JIS SERIES
JIS SERIES
8"
690
DIN SERIES
DIN SERIES
Main size of Flange Butterfly Valve outside & weight
CLASS 300
Air driving and

hydraulic driving
Electric Flanged Butterfly Valve
Worm Gear Driven Flanged Butterfly Valve
CLASS 150
DN
API SERIES
API SERIES
H2
Ho1
W1
F1
W1
F1
A3
F2
E2
E1
H2
E1
API Forged Steel Gate Valves
GENERAL VALVE
GENERAL VALVE
Forged steel gate valves
F2
E2
E1
A3
Our company are available in three bonnet designs. The first
F1
design is the Bolted Bonnet, with male-female joint, spiral wound

W1
gasket, made in F304L/graphite, Ring joint gasket are also available
Ho3
H3
Ho2
H1
and seal welded joint. On request a full penetration strength welded

joint is available. The third design is the pressure seal bonnet, with
a threaded and pressure seal bonnet joint.
Forged Steel Gate Valves

General Valve
L
L
CLASS 600
Air driving and

hydraulic driving
Electric driving
Worm gear
L
weight(kg)
H1
Ho 1
E1
F1
W1
H2
Ho 2
E2
F2
H3
Ho 3
A3
Worm gear
18 0
54 1
41 4
63
14 0
25 0
60 6
29 5
18 0
17 8
82
4"
19 0
60 7
44 7
63
14 0
25 0
65 0
35 8
18 0
17 8
12 5
5"
20 0
68 0
39 5
10 8
20 0
25 0
69 5
37 1
18 0
17 8
16 5
6"
21 0
68 6
49 0
15 2
24 0
31 5
74 3
38 7
18 0
17 8
19 1
8"
23 0
75 7
53 6
16 8
30 0
31 5
10 55
41 7
37 0
23 5
24 7
10 "
25 0
86 7
64 1
19 2
32 0
31 5
11 72
46 5
37 0
23 5
41 3
12 "
27 0
10 34
72 7
23 7
36 8
40 0
13 92
54 6
51 5
24 5
57 6
14 "
29 0
10 87
75 7
23 7
36 8
40 0
14 75
57 9
51 5
24 5
66 4
16 "
31 0
12 16
82 5
23 7
36 8
40 0
15 57
64 3
54 0
36 0
97 1
18 "
33 0
12 40
84 0
26 9
55 9
40 0
16 25
67 3
54 0
36 0
11 19
20 "
35 0
13 30
97 8
35 0
64 5
40 0
16 79
70 1
54 0
36 0
16 39
24 "
39 0
15 83
10 70
35 0
64 5
40 0
18 34
77 5
54 0
36 0
20 82
42
JIS SERIES
JIS SERIES
3"
Full port or conventional port

Outside screw and yoke (OS & Y)
Two piece self-aligning packing gland
Bolted bonnet & spiral wound gasket seal bonnet
Bolted bonnet with spiral-wound gasket,threaded and
seal welded bonnet or threaded and pressure seal bonnet
Integral backseat
Socket weld ends to ASME B16.11
Screwed ends (NPT) to ANSI/ASME B1.20.1.
DIN SERIES
DIN SERIES
NP S
Construction is as follows
API SERIES
API SERIES
H2
Ho1
on request. The second design is the welded bonnet, with a threaded
43
API Forged Steel Gate Valves
API Forged steel THD and SW Gate Valve
GENERAL VALVE
GENERAL VALVE
Application standards
CL800
Bolted bonnet, full port reduced port outside screw and yoke(OS & Y)
Threaded, butt-welded or socket welded ends; design to API 602
H(Open)
Specification
1/2
3/4
1 1 /4
2 1 /2
3/8
1/2
3/4
1 1 /2
11 /4
F.P
1 1 /2
2 1 /2
Face to face
79
92
111
120
120
140
178
180
Handwheel diameter
100
100
125
160
160
180
200
220
Height
161
163
196
223
251
290
333
370
Flow port dimension
10.5
13.5
18
24
29
36.5
45
51
2.22
2.39
4.24
5.7
7.05
10.9
16.8
24
Weight(Kg)
L
CL900-CL1500
H(Open)
Bolted bonnet, full port reduced port outside screw and yoke(OS&Y)
1/2
3/4
1 1 /4
F.P
3/8
1/2
3/4
1 1 /2
11 /4
1 1 /2
Face to face
111
111
120
120
140
178
180
Handwheel diameter
125
125
160
160
180
200
220
Height
191
192
219
243
296
316
370
Flow port dimension
10.5
13.5
18
24
29
36.5
45
4.4
4.3
7.2
11.4
16
23
2 1 /2
Part name
A105/F6a
A105/F6aHFS
LF2/304
F11/F6aHF
F304(L)/304(L)
F316(L)/316(L)
F51/F51
Body
A105
A105
LF2
F11
F304(L)
F316(L)
F51
Seat
410
410HF
304
410HF
304(L)
316(L)
F51
Wedge
F6a
F6a
F304
F6aHF
F304(L)
F316(L)
F51
Stem
410
410
304
410
304(L)
316(L)
F51
Gasket
304+graphite
304+graphite
304+graphite
304+graphite
304+graphite
316+graphite
316+graphite
Bonnet
A105
A105
LF2
F11
F304(L)
F316(L)
F51
Bolt
B7
B7
L7
B16
B8(M)
B8(M)
B8M
Pin
410
410
410
410
304
304
304
Gland
410
410
304
410
304
316
F51
10
Gland eyebolt
B7
B7
L7
B16
B8(M)
B8(M)
B8M
11
Gland flange
A105
A105
LF2
F11
F304
F304
F304
12
Hex nut
2H
2H
2H
2H
8(M)
8(M)
8M
13
Stem nut
410
410
410
410
410
410
410
14
Locking nut
35
35
35
35
35
35
35
CL1500-CL2500
H(Open)
Welded bonnet, full port or red. port, outside screw and yoke(OS&Y)
Specification(NPS)
F.P
Pressure pound level
1/2
3/4
11 /2
Face to face
CL1500
110
150
150
210
235
Handwheel diameter
CL1500
110
130
130
180
250
Height
CL1500
277
300
390
400
435
Flow port dimension
CL1500
14
17
22
35
37
CL1500
5.1
11
12.1
22
37
Weight(Kg)
L
15
Nameplate
AL
AL
AL
AL
AL
AL
AL
16
Handwheel
A197
A197
A197
A197
A197
A197
A197
17
Lubricating
gasket
410
410
410
410
410
410
410
18
Packing
Graphite
Graphite
Graphite
Graphite
Graphite
Graphite
Graphite
CL1500-CL2500
H(Open)
Pressure seal bonnet, full port outside screw and yoke(OS & Y)
Socket welded ends, design conform to ASME B16.34
Specification
F.P
Pressure pound level
1/2
3/4
11 /4
11 /2
Face to face
CL2500
186
186
186
232
232
279
Handwheel diameter
CL2500
200
200
200
280
280
300
Height
CL2500
325
325
327
467
468
540
Flow port dimension
CL2500
14
14
19
25
30
36.5
CL2500
12.3
11.6
10.8
26.0
28.4
60.0
Weight(Kg)
45
JIS SERIES
JIS SERIES
NO.
DIN SERIES
DIN SERIES
R.P
Specification
Weight(Kg)
Main part materials list
44
R.P
API SERIES
API SERIES
1Design and manufacture conform to

API 602BS5352ANSI B16.34;
2Connection ends conform to
1)Socket welded dimension conform to ANSI B16.11
2)Screw ends dimension conform to ANSI B1.20.1
3)Butt-welded conform to ANSI B16.25
4)Flanged ends conform to ANSI B16.5
3Test and inspection conform to:
API 598
4Structure features
Bolted bonnet, outside screw and yoke;
Welded bonnet, outside screw and yoke.
5Materials conform to ANIS/ASTM.
6Main materials
A105LF2F5F11F22304(L)316(L)F347F321
F51MonelAlloy Steel.
API Forged steel Flange Gate Valve
API Forged Steel Globe Valves
GENERAL VALVE
GENERAL VALVE
Forged steel globe valves
CL150-300-600
Bolted bonnet, red., outside screw and yoke(OS & Y)

Flange-welded or butt-welded ends; design to API602;BS5352
H(Open)
Specification
CL150
Face to face
(mm)
L(RF)
CL300
L1(BW)
CL600
Handwheel diameter
API SERIES
Flow port dimension

L1
CL150
Weight
(Kg)
CL300
CL600
d
RF
1/2
3/4
108
117
127
1 1 /4
140
11/2
165
178
2 1 /2
190
140
152
165
178
165
190
216
229
190
216
241
241
292
330
100
100
125
160
160
180
200
176
184
161
163
217
226
250
290
357
196
226
250
290
357
10
13.5
18
3.4
3.98
6.12
24
29
36.5
45
7.2
10.4
15.5
24.5
BW
2.8
3.3
5.4
7.1
8.2
12.5
20
RF
3.77
4.89
7.23
9.6
12.65
18
26.2
BW
3.5
4.4
6.8
8.1
9.2
15.4
22
RF
4.2
5.8
8.8
12.1
15.6
19.5
32
BW
4.5
5.1
8.2
10.5
12.4
20.1
28
wound gasket, made in F304L/graphite, Ring joint gasket are also

available on request. The second design is the welded bonnet,
with a threaded and seal welded joint. On request a full penetration
strength welded joint is available. The third design is the pressure
seal bonnet, with a threaded and pressure seal bonnet joint.
Forged Steel Globe Valves

General Valve
API SERIES
CL150
CL300,CL600
Height
Our company are available in three bonnet designs. The

first design is the Bolted Bonnet, with male-Female joint, spiral
Outside screw and yoke (OS&Y)
Two piece self-aligning packing gland
H(Open)
Bolted bonnet with spiral-wound gasket, threaded and seal

welded bonnet or threaded and pressure seal bonnet
CL900-CL1500
Integral backseat
Bolted bonnet, red., outside screw and yoke(OS & Y)

3/4
1 1 /4
11/2
Face to face
(mm)
216
229
254
279
305
368
L(RTJ)
216
229
254
279
305
371
DIN SERIES
Handwheel diameter
125
125
160
180
200
220
Height
191
192
219
257
296
316
Flow port dimension
13.5
18
24
29
36.5
45
7.2
11.5
15.6
16.2
22.6
28.2
Weight (Kg)
Disc can change for throttle typeneedle typeball type
DIN SERIES
1/2
L(RF) L1(BW)
Specification

Screwed ends(NPT) to ANSI/ASME B1.20.1
and check type.
H(Open)
CL2500
Welded bonnet, red., outside screw and yoke (OS & Y)

Specification
3/4
11/2
273
308
384
451
Face to face
(mm)
L(RTJ)
264
273
308
387
454
Handwheel diameter
125
160
160
200
240
Height
207
240
258
355
370
Flow port dimension
13.5
13.5
19
30
36.5
19.5
21.5
42
65
95
Weight (Kg)
JIS SERIES
JIS SERIES
1/2
264
L(RF) L1(BW)
CL2500
H(Open)
Pressure seal gate valves, red., outside screw and yoke(OS & Y)
Flange-welded or butt-welded ends; design to ASME B16.34
1/2
3/4
11/2
Face to face
(mm)
L(RF) L1(BW)
264
273
308
384
451
L(RTJ)
264
273
308
387
451
Handwheel diameter
200
200
200
280
300
Height
325
325
327
478
540
Flow port dimension
13.5
13.5
19
30
36.5
4.6
6.8
7.6
15
21.9
Specification
L1
Weight (Kg)
46
47
API Forged Steel Globe Valves
API Forged steel THD and SW globe valves
GENERAL VALVE
GENERAL VALVE
CL800
Bolted bonnet, full port or red. port outside screw and yoke(OS & Y)
THD., SW or BW ends, design standard: BS5352
1Design and manufacture conform to BS5352 MSS SP-118

H(Open)
1)Scoket welded ends conform to ANSI B16.11

2)Screw ends conform to ANSI B1.20.1
3)Butt-welded ends conform to ANSI B16.25
Ne edl e type di sc

d
API 598
4Structure features
1/2
3/4
1 1 /4
1 1 /2
F.P
3/8
1/2
3/4
11 /4
1 1 /2
Face to face
79
92
111
120
152
172
200
Handwheel diameter
100
100
125
160
160
180
200
Height
164
164
203
224
260
300
355
Flow port dimension
13
17.5
23
30
35
46
2.28
2.37
4.3
5.75
7.8
12.5
17.5
1 1 /4
1 1 /2
2 1 /2
1 1 /2
Weight(Kg)
2 1 /2
Bolted bonnet, outside screw and yoke;

Welded bonnet, outside screw and yoke.
5Materials conform to ANSI/ASTM.
CL900-CL1500
6Main materials
Bolted bonnet, red. port or full port outside screw and yoke(OS&Y)
THD.,BW or SW ends, design standard: BS5352
A105LF2F5F11F22304(L)316(L) F347
H(Open)
F321F51MonelAlloy Steel.
NO.
Part name
A105/F6a
A105/F6aHFS
LF2/304
F11/F6aHF
F304(L)/304(L)
F316(L)/316(L)
F51/F51
Body
A105
A105+HF
LF2
F11+HF
F304(L)
F316(L)
F51
Disc
F6a
F6a
F304
F6aHF
F304(L)
F316(L)
F51
Stem
410
410
304
410
304(L)
316(L)
F51
Gasket
304+ graphite
304+ graphite
304+ graphite
304+ graphite
304+ graphite
316+ graphite
316+ graphite
Bonnet
A105
A105
LF2
F11
F304(L)
F316(L)
F51
Bolt
B7
B7
L7
B16
B8(M)
B8(M)
B8M
Specification
1/2
3/4
F.P
3/8
1/2
3/4
11 /4
Face to face
111
111
120
152
172
200
220
Handwheel diameter
125
125
160
160
180
200
240
Height
207
207
240
258
330
355
370
Flow port dimension
12
15
20
28
32
40
45
3.7
3.6
6.8
7.6
11.6
15
21.9
Weight(Kg)
R.P
410
410
410
410
304
304
304
Gland
410
410
304
410
304
316
F51
10
Gland eyebolt
B7
B7
L7
B16
B8(M)
B8(M)
B8M
11
Gland flange
A105
A105
LF2
F11
F304
F304
F304
12
Hex nut
2H
2H
2H
2H
8(M)
8(M)
8M
13
Stem nut
410
410
410
410
410
410
410
14
Locking nut
35
35
35
35
35
35
35
15
Nameplate
AL
AL
AL
AL
AL
AL
AL
16
Handwheel
A197
A197
A197
A197
A197
A197
A197
H(Open)
Welded bonnet
Specification
F.P
1/2
3/4
1 1 /2
Face to face
150
150
210
235
235
Handwheel diameter
130
130
250
300
300
Height
293
300
390
435
435
Flow port dimension
11
14
19
28
35
10
10.3
22.4
38
38
Pin
CL2500
Welded bonnet (RJ), red. port, outside screw and yoke(OS & Y)
SW ends, design standard: ASME B16.34
Weight(Kg)
Packing
Graphite
Graphite
Graphite
Graphite
Graphite
48
Graphite
Graphite
CL2500
H(Open)
Pressure seal bonnet, red. port, outside screw and yoke(OS & Y)
SW ends, design standard:ASME B16.34
Specification
F.P
1/2
3/4
1 1 /4
1 1 /2
Face to face
186
186
186
232
232
279
Handwheel diameter
200
200
200
280
280
300
Height
375
378
380
490
490
540
Flow port dimension
11
14
19
25
28
35
12.3
11.6
10.8
26.0
28.4
60
Weight(Kg)
49
JIS SERIES
JIS SERIES
DIN SERIES
DIN SERIES
Needle type disc
18
API SERIES
API SERIES
3Test and inspection conform to
R.P
Specification
API Forged steel Flange Globe Valve
API Forged Steel Check Valves
GENERAL VALVE
W
GENERAL VALVE
Forged steel check valves
CL150-300-600
H(Open)
Specification
R.P
CL150
Face to face
CL300
CL600
Handwheel diameter
d
API SERIES
L1
BW
Weight
(Kg)
CL300
H(Open)
CL600
3/4
11 /4
1 1 /2
108
117
127
140
165
203
267
152
178
203
216
229
165
190
216
229
241
292
100
100
125
160
160
180
180
184
217
224
260
300
164
164
203
224
260
300
13
17.5
23
30
35
RF
3.45
4.00
6.19
9.6
10.5
17
BW
2.3
3.6
7.8
8.2
12.0
15.0
RF
3.8
5.1
7.2
12
13.5
19.7
BW
2.8
4.0
8.5
9.2
12.6
16.8
RF
5.6
7.8
12.5
17
23.5
38.8
BW
3.4
4.7
9.2
10.5
13.3
18.9
CL600
Flow port dimension(mm)
CL150
CL150/CL300
Height
L(RF)
L1(BW)
1/2
H
d
Forged Steel Check Valves

General Valve
CL900-CL1500
Bolted bonnet, reducing port, outside screw and yoke(OS & Y)
Flanged or BW ends, design standard: BS5352
d
F.P
1/2
3/4
11 /4
1 1 /2
Face to face
(mm)
L(RF),L1(BW)
216
229
254
279
305
368
L(RTJ)
216
229
254
279
305
371
Handwheel diameter(mm)
125
125
160
160
180
200
Height(mm)
207
207
230
160
300
355
12
15
20
28
32
40
11
13.2
17.4
19
24.5
31
Weight (Kg)

Lift type check valves
Ball type check valves
Swing type check valves
Acceding to requirement equip inside spring
Bolted bonnet with spiral-wound gasket, threaded and seal
welded bonnet or threaded and pressure seal bonnet
Screwed ends (NPT) to ANSI/ASME B1.20.1
Disc can change for soft seal disc and ball disc.
DIN SERIES
DIN SERIES
L1
BW
Specification
API SERIES
Our company are available in three bonnet designs. The first

design is the Bolted Bonnet, with male-female joint, spiral wound
gasket, made in F304L/graphite, Ring joint gasket are also available
on request. The second design is the welded bonnet, with a threaded
and seal welded joint. On request a full penetration strength welded
joint is available. The third design is the pressure seal bonnet, with
a threaded and pressure seal bonnet joint. The check valves are
also available in three different design configurations. These are
piston check, ball check, or swing check designs.
Bolted bonnet, reducing port, outside screw and yoke(OS & Y)

Flanged or BW ends, design standard: BS5352
H(Open)
CL2500
L1
BW
Welded bonnet, reducing port, outside screw and yoke(OS & Y)

Flanged or BW ends, design standard: ASME B16.34
Specification
F.P
1/2
3/4
1 1 /2
Face to face
(mm)
L(RF),L1(BW)
264
273
308
384
451
L(RTJ)
264
273
308
387
454
125
160
200
250
240
Height(mm)
207
240
258
355
300
11
14
19
28
35
19.5
21.5
42
65
95
Weight (Kg)
JIS SERIES
JIS SERIES
Welded bonnet
CL2500
H(Open)
Pressure seal bonnet, reducing port, outside screw and yoke(OS & Y)
Flanged or BW ends, design standard: ASME B16.34
L1
BW
Specification
F.P
1/2
3/4
11 /4
1 1 /2
Face to face
(mm)
L(RF),L1(BW)
264
273
308
349
384
451
L(RTJ)
264
273
308
349
387
454
200
200
280
280
280
300
Height(mm)
320
320
320
440
440
490
11
14
19
25
28
35
21.5
24.7
30.4
48.1
58.1
130
Weight (Kg)
50
51
GENERAL VALVE
GENERAL VALVE
CL800
1Design and manufacture conform to BS5352 MSS SP-118
BB, Full Bore or Red. Bore, THD or BW or SW ends, Design Standard: BS5352
H
Ball type
F.P
2)Screw ends conform to ANSI B1.20.1
3/8
1/2
3/4
Lift
Swing
Lift
Swing
Lift
Swing
Lift
Swing
79
79
61
61
9
10.5
1.5
1.5
92
92
61
61
13
13.5
1.7
1.7
111
111
78
78
17.5
18
3.3
3.3
3)Butt-welded ends conform to ANSI B16.25

API SERIES
Swing type
3Test and inspection conform toAPI 598
Spring-load acc. to client's requirement
4Structure features
Face to face
Height
Flow port dimension
Weight(Kg)
Bolted bonnet
5Materials conform to ANSI/ASTM.
1/2
3/4
120
120
84
84
23
24
4.2
4.2
152
120
84
84
30
29
4.2
4.2
172
140
118
120
35
36.5
10.5
8.5
200
178
132
133
46
45
12.5
10.9
2 1 /2
2
200
178
132
133
40
45
12.5
10.9
2 1 /2
BB, Full Bore or Red. Bore, THD or BW or SW ends, Design Standard: BS5352
A105LF2F5F11F22304(L)
H
Specification
Ball type
MonelAlloy Steel.
Swing type
L
Spring-load acc. to client's requirement
R.P
1/2
3/4
1 1 /4
F.P
3/8
1/2
3/4
Lift
Swing
Lift
Swing
Lift
Swing
Lift
Swing
92
92
61
61
7
8
1.5
1.5
111
111
78
78
12
10.5
3.4
3.4
111
111
78
78
15
13.5
3.3
3.3
1
120
120
84
84
20
18
4.2
4.2
Face to face
Height
Flow port dimension
Weight(Kg)
1 1 /2
11 /4
152
120
103
101
28
24
6.3
5.0
1 1 /2
172
140
118
120
32
29
10.5
8.5

Part name
A105/F6a
Body
A105
A105
LF2
F11
F304(L)
Seat ring
410
410HF
304
410HF
304(L)
316(L)
F51
Disc
F6a
F6a
F304
F6aHF
F304(L)
F316(L)
F51
Gasket
304+Graphite
304+Graphite
304+Graphite
304+Graphite
304+Graphite
316+Graphite
316+Graphite
F316(L)
F51
A105/F6aHFS
LF2/304
F11/F6aHF F304(L)/304(L)F316(L)/316(L)
CL150-300-600
F51/F51
BB, Red. Bore, Flanged or BW ends, Design Standard: BS5352

Specification
F51
H(Open)
Ball type
F316(L)
We lde d b onn et
L
L1
A105
A105
LF2
F11
Bolt
B7
B7
L7
B16
B8(M)
B8(M)
B8M
15
Nameplate
AL
AL
AL
AL
AL
AL
AL
AL
AL
AL
AL
AL
AL
AL
32
Revit
33
Steel ball
430
430
304
STL
316(L)
316(L)
STL
34
Disc nut
2H
2H
8(M)
8(M)
8M
Hinge
410
410
304
410
316(L)
316(L)
F51
36
Pin
410
410
304
410
304(L)
316(L)
F51
Specification
Wel ded bon net
L1
Weight (Kg)
CL300
CL600
52
R.P
CL150
Face to face
CL300
CL600
CL150
Height
CL300/600
CL150
3/4
1 1 /4
1 1 /2
118
178
191
81
78
13
4.6
3.6
4.8
4.3
5.8
5.1
127
203
216
93
84
17.5
8.5
7.6
8.8
8.0
9.5
8.8
140
216
229
95
101
23
9.2
8.5
9.6
8.6
10.4
9.2
165
229
241
103
120
30
12.5
11.3
13.7
12.7
15.6
14.8
203
267
292
118
133
35
14.8
13.6
17.8
16.2
24.5
22.5
BB, Red. Bore, Flanged or BW ends, Design Standard: BS5352
35
L(RF)
L1(BW)
1/2
108
153
165
77
61
10
3.6
3.0
3.7
3.2
4.0
3.4
CL150-300-600
Bonnet
H(Open)
JIS SERIES
F304(L)
R.P
CL150
Face to face
CL300
CL600
CL150
Height
CL300/600
RF
CL150
BW
RF
Weight (Kg)
CL300
BW
RF
CL600
BW
RF
BW
RF
BW
RF
BW
L(RF)
L1(BW)
H
d
1/2
3/4
1 1 /4
1 1 /2
108
153
165
77
61
10.5
3.6
3.0
3.7
3.2
4.0
3.4
118
178
191
81
78
13.5
4.6
3.6
4.8
4.3
5.8
5.1
127
203
216
93
84
18
8.5
7.6
8.8
8.0
9.5
8.8
140
216
229
95
101
24
9.2
8.5
9.6
8.6
10.4
9.2
165
229
241
103
120
29
12.5
11.3
13.7
12.7
15.6
14.8
203
267
292
118
133
36.5
14.8
13.6
17.8
16.2
24.5
22.5
53
JIS SERIES
NO.
DIN SERIES
1 1 /2
CL900-CL1500
6Main materials
316(L)F347F321F51
DIN SERIES
1 1 /2
11 /4
1 1 /4
API SERIES
R.P
1)Scoket welded ends conform to ANSI B16.11
Specification
Flange size
Flange size
GENERAL VALVE
GENERAL VALVE
ASME B16.5B16.47AMSS SP-44
K
D
CLASS300LB RF PN5.0MPa Tu surface
CLASS400LB RF PN6.8MPa raised-face
NPS
mm
K
in
mm
in
mm
n-L
in
mm
Bolt diameter
in
mm
in
mm
in
Double bolt length

raisedring
face
55
/
15
1/2
90
3.50
60.5
2.375
35
1.375
4-15
4-0.62
10
M14
1/2
20
3/4
100
3.875
70
2.75
43
1.6875
4-15
4-0.62
10
M14
1/2
65
25
110
4.25
79.5
3.125
51
4-15
4-0.62
12
0.44
M14
1/2
65
75
32
11/4
120
4.625
89
3.50
64
2.50
4-15
4-0.62
13
0.50
M14
1/2
70
85
40
11/2
130
98.5
3.875
73
2.875
4-15
4-0.62
15
0.56
M14
1/2
70
85
50
150
120.5
4.75
92
3.625
4-19
4-0.75
16
0.62
M16
5/8
85
95
65
21/2
180
139.5
5.50
105
4.125
4-19
4-0.75
18
0.69
M16
5/8
90
100
80
190
7.50
152.5
127
4-19
4-0.75
19
0.75
M16
5/8
90
100
100
230
190.5
7.50
157
6.1875
8-19
8-0.88
24
0.94
M16
5/8
90
100
125
255
10
216
8.50
186
7.3125
8-22
8-0.88
24
0.94
M20
3/4
90
110
150
280
11
241.5
9.50
216
8.50
8-22
8-0.88
26
M20
3/4
95
115
200
345
13.50
298.5
11.75
270
10.625
8-22
8-0.88
29
1.12
M20
3/4
100
120
250
10
405
16
362
14.25
324
12.75
12-25
12-1
31
1.19
M24
7/8
110
125
300
12
485
19
432
17
381
15
12-25
12-1
32
1.25
M24
7/8
115
135
350
14
535
21
476
18.75
413
16.25
12-29
12-1.12
35
1.38
M27
120
145
400
16
600
23.50
540
21.25
470
18.50
16-29
16-1.12
37
1.44
M27
135
145
450
18
635
25
578
22.75
533
21
16-32
16-1.25
40
1.56
M30
11/8
145
160
500
20
700
27.50
635
25
584
23
20-32
20-1.25
43
1.69
M30
11/8
160
170
600
24
815
32
749.5
29.50
692
27.25
20-35
20-1.38
48
1.88
M33
11/4
170
185
650
26
870
34.25
806.5
31.75
749
29.50
24-35
24-1.38
68
2.69
M33
11/4
210
700
28
927
36.50
863.6
34.00
800
31.50
28-35
28-1.38
71
2.81
M33
11/4
220
750
30
984
38.75
914.4
36.00
857
33.75
28-35
28-1.38
75
2.94
M33
11/4
230
800
32
1060
41.75
978
38.50
914
36.00
28-41
28-1.62
81
3.19
M393
11/2
255
850
34
1111
43.75
1029
40.50
965
38.00
32-41
32-1.62
83
3.25
M393
11/2
260
900
36
1168
4600
1086
42.75
1022
40.25
32-41
32-1.62
90
3.56
M393
11/2
275
950
38
1238
48.75
1149.4
45.25
1073
42.25
32-41
32-1.62
87
3.44
M393
11/2
270
1000
40
1289
50.75
1200.2
47.25
1124
44.25
36-41
36-1.62
90
3.56
M393
11/2
275
1050
42
1346
53.00
1257.3
49.50
1194
47.00
36-41
36-1.62
97
3.81
M393
11/2
290
1100
44
1403
55.25
1314.5
51.75
1245
49.00
40-41
40-1.62
102
4.00
M393
11/2
300
1150
46
1454
57.25
1365.3
53.75
1295
51.00
40-41
40-1.62
103
4.06
M393
11/2
305
1200
48
1511
59.50
1422.4
56.00
1359
53.50
44-41
44-1.62
108
4.25
M393
11/2
310
1250
50
1568
61.75
1479.6
58.25
1410
55.50
44-48
44-1.88
111
4.38
M453
13/4
330
1300
52
1626
64.00
1537
60.50
1461
57.50
44-48
44-1.88
116
4.56
M453
13/4
340
1350
54
1683
66.25
1594
62.75
1511
59.50
44-48
44-1.88
121
4.75
M453
13/4
350
1400
56
1746
68.75
1651
65.00
1575
62.00
48-48
48-1.88
124
4.88
M453
13/4
355
1450
58
1803
71.00
1708.2
67.25
1616
64.00
48-48
48-1.88
129
5.06
M453
13/4
365
1500
60
1854
73.00
1759
69.25
1676
66.00
52-48
52-1.88
132
5.19
M453
13/4
375
55
JIS SERIES
JIS SERIES
54
DN
DIN SERIES
DIN SERIES
CLASS150 RF Flange size

Size
General Valve
API SERIES
API SERIES
Flange size
6.4
nxL
nxL
Flange size
Flange size
GENERAL VALVE
GENERAL VALVE
Size
n-L
Bolt diameter
Double bolt length
Size
Double bolt length
in
mm
in
raisedface
ring
15
0.56
M14
1/2
75
75
4-0.75
16
0.62
M16
5/8
90
90
4-19
4-0.75
18
0.69
M16
5/8
90
90
4-19
4-0.75
21
0.81
M16
5/8
95
95
n-L
NPS
mm
in
mm
in
mm
in
mm
in
mm
in
mm
in
15
1/2
95
3.75
66.7
2.62
35
1.38
4-16
4-0.62
15
0.56
M14
1/2
65
75
DN
NPS
mm
in
mm
in
mm
in
mm
in
mm
20
3/4
120
4.62
82.5
3.25
43
1.69
4-19
4-0.75
16
0.62
M16
5/8
75
90
15
1/2
95
3.75
66.7
2.62
35
1.38
4-16
4-0.62
25
125
4.88
89
3.50
51
2.0
4-19
4-0.75
18
0.69
M16
5/8
75
90
20
3/4
120
4.62
82.5
3.25
43
1.69
4-19
32
11/4
135
5.25
98.5
3.88
64
2.50
4-19
4-0.75
19
0.75
M16
5/8
85
95
25
125
4.88
88.9
3.50
51
2.0
11/4
135
5.25
98.4
3.88
64
2.50
ring
40
11/2
155
6.12
114.5
4.50
73
2.88
4-22
4-0.88
21
0.81
M20
3/4
90
100
32
50
165
6.50
127
5.0
92
3.62
8-19
8-0.62
23
0.88
M16
5/8
90
100
40
11/2
155
6.12
114.3
4.50
73
2.88
4-22
4-0.88
23
2.88
M20
3/4
110
110
65
21/2
190
7.50
149
5.88
105
4.12
8-22
8-0.88
26
M20
3/4
100
115
50
165
6.50
127
5.0
92
3.62
8-19
8-0.75
26
1.00
M16
5/8
110
110
80
210
8.25
168.5
6.62
127
5.0
8-22
8-0.88
29
1.12
M20
3/4
110
120
65
21/2
190
7.50
149.2
5.88
105
4.12
8-22
8-0.88
29
1.12
M20
3/4
120
120
210
8.25
168.3
6.62
127
5.0
8-22
8-0.88
32
1.25
M20
3/4
125
125
275
10.72
215.9
8.50
157
6.19
8-26
8-1.00
38
1.50
M20
7/8
145
145
255
10
200
7.88
157
6.19
8-22
8-0.88
32
1.25
M20
3/4
115
125
125
280
11
235
9.25
186
7.31
8-22
8-0.88
35
1.38
M20
3/4
120
135
100
150
320
12.50
270
10.62
216
8.50
12-22
12-0.88
37
1.44
M20
3/4
120
140
125
330
13.0
266.7
10.5
186
7.31
8-29
8-1.12
45
1.75
M24
165
165
150
355
14.0
292.1
11.5
216
8.50
12-29
12-1.12
48
1.88
M27
170
170
200
420
16.50
349.2
13.75
270
10.62
12-32
12-1.25
56
2.19
M27
11/8
190
190
250
200
380
15.0
330
13.0
270
10.62
12-26
12-1
42
1.62
M24
7/8
140
150
250
10
445
17.50
387.5
15.25
324
12.75
16-29
16-1.12
48
1.88
M27
160
170
300
12
520
20.50
451
17.75
381
15.0
16-32
16-1.25
51
M30
11/8
170
185
350
14
585
23.0
514.5
20.25
413
16.25
20-32
20-1.25
54
M30
2.12
11/8
180
190
400
16
650
25.50
571.5
22.50
470
18.50
20-35
20-1.38
58
2.25
M33
11/4
190
205
450
18
710
28.0
628.5
24.75
533
21.0
24-35
24-1.38
61
2.38
M33
11/4
195
210
500
20
775
30.50
686
27.0
584
23.0
24-35
24-1.38
64
2.50
M33
11/4
205
220
600
24
915
36.0
813
32.0
692
27.25
24-41
24-1.62
70
2.75
M393
11/2
230
255
15/8
260
285
15/8
275
300
26
972
38.25
876.3
34.50
749
29.50
28-45
28-1.75
79
3.12
700
28
1035
40.75
934
37.00
800
31.50
28-45
28-1.75
86
3.38
M423
750
30
1092
43.0
997
39.25
857
33.75
28-48
28-1.88
92
3.62
M453
13/4
290
320
800
32
1149
45.25
1054.1
41.50
914
36.00
28-51
28-2.00
99
3.88
M483
17/8
310
340
850
34
1207
47.50
1105
43.50
965
38.00
32-51
32-2.00
102
4.00
M483
17/8
315
345
900
36
1270
50.00
1168.4
46.00
1022
40.25
32-54
32-2.12
105
4.12
M523
330
360
11/2
310
950
38
1168
46.00
1092.2
43.00
1029
40.50
32-41
32-1.62
108
4.25
M393
1000
40
1238
48.75
1156
45.50
1086
42.75
32-45
32-1.75
114
4.50
M423
15/8
330
1050
42
1289
50.75
1207
47.50
1137
44.75
32-45
32-1.75
119
4.69
M423
15/8
340
1100
44
1353
53.25
1264
49.75
1194
47.00
32-45
32-1.88
124
124
M453
13/4
355
1150
46
1416
55.75
1321
52.00
1245
49.00
28-51
28-2.00
129
129
M483
17/8
370
1200
48
1467
57.75
1372
54.00
1302
51.25
32-51
32-2.00
133
133
M483
17/8
380
1250
50
1530
60.25
1429
56.25
1359
53.50
32-55
32-2.12
140
140
M523
400
M523
410
M563
21/4
435
21/4
440
21/4
450
460
1300
52
1581
62.25
1480
58.25
1410
55.50
32-55
32-2.12
145
145
1350
54
1657
65.25
1549
61.00
1467
57.75
28-60
28-2.38
152
152
1400
56
1708
67.25
1600
63.00
1518
59.75
28-60
28-2.38
154
154
1450
1500
58
60
1759
1810
69.25
71.25
1651
1702
65.00
67.00
1575
1616
62.00
64.00
32-60
32-30
32-2.38
32-2.38
159
164
159
164
M563
M563
M563
56
21/4
510
20.0
431.8
17.0
324
12.75
16-35
16-1.38
64
2.50
M30
11/4
215
215
12
560
22.0
489
19.25
381
15.0
20-35
20-1.38
67
2.62
M33
11/4
220
220
350
14
605
23.75
527
20.75
413
16.25
20-39
20-1.50
70
2.75
M363
13/8
235
235
400
16
685
27.0
603.2
23.75
470
18.50
20-42
20-1.62
77
3.00
M393
11/2
255
255
450
18
745
29.25
654
25.75
533
21.0
20-45
20-1.75
83
3.25
M423
15/8
275
275
500
20
815
32.0
723.9
28.50
584
23.0
24-45
24-1.75
89
3.50
M423
15/8
285
290
600
24
940
37.0
838.2
33.0
692
27.25
24-51
24-2.00
102
4.00
M483
17/8
330
335
650
26
1016
40.00
914.4
36.0
749
29.560
58-51
28-2.00
108
4.25
M483
17/8
350
360
700
28
1073
42.25
965.2
38.0
800
31.50
28-55
28-2.12
111
4.38
M523
360
380
750
30
1130
44.50
1022.4
40.25
857
33.75
28-55
28-2.12
114
4.50
M523
370
385
800
32
1194
47.00
1079.5
42.50
914
36.00
28-60
28-2.38
117
4.62
M563
21/4
380
400
850
34
1245
49.00
1130.3
44.50
965
38.00
28-60
28-2.38
121
4.75
M563
21/4
390
410
900
36
1314
51.75
1194
47.00
1022
40.25
28-67
28-2.62
124
4.88
M643
21/4
410
430
950
M563
21/4
450
38
1270
50.00
1162
45.75
1054
41.50
28-60
28-2.38
152
6.00
1000
40
1321
52.00
1213
47.75
1111
43.75
32-60
32-2.38
159
6.25
M563
21/4
465
1050
42
1403
55.25
1283
50.50
1168
46.00
28-67
28-2.62
168
6.62
M643
21/2
500
1100
44
1454
57.25
1333.5
52.50
1226
48.25
32-67
32-2.62
173
6.81
M643
21/2
510
1150
46
1511
59.50
1391
54.75
1276
50.25
32-67
32-2.62
179
7.06
M643
21/2
520
1200
48
1594
62.75
1460.5
57.50
1334
52.50
32-73
32-2.88
189
7.44
M703
23/4
555
1250
50
1670
65.75
1524
60.00
1384
54.50
28-80
28-3.12
197
7.75
M763
580
1300
52
1721
67.75
1575
62.00
1435
56.50
32-80
32-3.12
203
8.00
M763
595
1350
54
1778
70.00
1632
64.25
1492
58.75
32-80
32-3.12
210
8.25
M763
610
1400
56
1854
73.00
1695
66.75
1543
60.75
32-86
32-3.38
217
8.56
M823
31/4
635
1450
58
1905
75.00
1746
68.75
1600
63.00
32-86
32-3.38
222
8.75
M823
31/4
645
1500
60
1994
78.50
1822
71.75
1657
65.25
28-94
28-3.62
233
9.19
M903
31/2
680
57
JIS SERIES
JIS SERIES
650
M423
10
300
DIN SERIES
DIN SERIES
100
80
API SERIES
API SERIES
Bolt diameter
DN
raisedface
Flange size
GENERAL VALVE
Size
NPS
DN
API SERIES
DIN SERIES
15
20
25
32
40
50
65
80
100
125
150
200
250
300
350
400
450
500
600
650
700
750
800
850
900
950
1000
1050
1100
1150
1200
1/2
3/4
1
11/4
11/2
2
21/2
3
4
5
6
8
10
12
14
16
18
20
24
26
28
30
32
34
36
38
40
42
44
46
48
n-L
Bolt diameter
mm
in
mm
in
mm
in
mm
in
mm
in
mm
C
in
120
130
150
160
180
215
245
240
290
350
380
470
545
610
640
705
785
855
1040
1086
1168
1232
1314
1394
1461
1461
1511
1562
1648
1734
1784
4.75
5.12
5.88
6.25
7.0
8.50
9.62
9.5
11.5
13.75
15.0
18.50
21.5
24.0
25.25
27.75
31.0
33.75
41.0
42.75
46.00
48.50
51.75
55.00
57.50
57.50
59.50
61.50
64.88
68.25
70.25
82.6
88.9
101.6
111.1
123.8
165.1
190.5
190.5
235.0
279.4
317.5
393.7
469.9
533.4
558.8
616
685.8
749.3
901.7
952.5
1022.3
1085.9
1155.7
1225.6
1289
1289
1339.9
1390.7
1463.5
1536.7
1587.5
3.25
3.50
4.0
4.38
4.88
6.50
7.50
7.50
9.25
11.0
12.50
15.50
18.50
21.0
22.0
24.25
27.0
29.50
35.5
37.50
40.25
42.75
45.50
48.25
50.75
50.75
52.75
54.75
57.62
60.50
62.50
35
43
51
64
73
92
105
127
157
186
216
270
324
381
413
470
533
584
692
749
800
857
914
965
1022
1099
1162.0
1213
1270
1334
1384
1.38
1.69
2.0
2.50
2.88
3.62
4.12
5.0
6.19
7.31
8.50
10.62
12.75
15.0
16.25
18.50
21.0
23.0
27.25
29.50
31.50
33.75
36.00
38.00
40.25
43.25
45.75
47.75
50.00
52.50
54.50
4-22
4-22
4-26
4-26
4-29
8-26
8-29
8-26
8-32
8-35
12-32
12-39
16-39
20-39
20-42
20-45
20-51
20-55
20-68
20-73
20-80
20-80
20-86
20-94
20-94
20-94
24-94
24-94
24-99
24-105
24-105
4-0.88
4-0.88
4-1
4-1
4-1.12
8-1
8-1.12
8-1
8-1.25
8-1.38
12-1.25
12-1.50
16-1.50
20-1.50
20-1.62
20-1.75
20-2.0
20-2.12
20-2.62
20-2.88
20-3.12
20-3.12
20-3.38
20-3.62
20-3.62
20-3.62
24-3.62
24-3.62
24-3.88
24-4.12
24-4.12
22.5
25.5
29
29
32
38.5
41.5
38.5
44.5
51
56
63.5
70
79.5
86
89
102
108
140
140
146
149
159
165
171.5
191
197
206
214
225.5
233
0.88
1.0
1.12
1.12
1.25
1.50
1.62
1.50
1.75
2.0
2.19
2.50
2.75
3.12
3.38
3.50
4
4.25
5.5
5.50
5.62
5.88
6.25
6.50
6.75
7.50
7.75
8.12
8.44
8.88
9.19
M20
M20
M24
M24
M27
M24
M27
M24
M30
M33
M33
M363
M363
M363
M393
M423
M483
M523
M643
M703
M763
M763
M823
M903
M903
M903
M903
M903
M953
M1003
M1003
in
0.88
1
1.12
1.12
1.25
1.50
1.62
1.88
2.12
2.88
3.25
3.62
4.25
4.88
5.25
5.75
6.38
7
8
Bolt diameter
mm
in
M20
3/4
M20
3/4
M24
7/8
M24
7/8
M27
1
M24
7/8
M27
1
M30
11/8
M33
11/4
M393
11/2
M363
13/8
M423
15/8
M483
17/8
M523
2
M563
21/4
M643
21/2
M703
23/4
M763
3
M903
31/2
3/4
3/4
7/8
7/8
1
7/8
1
7/8
11/8
11/4
11/8
13/8
13/8
13/8
11/2
15/8
17/8
2
21/2
23/4
3
3
31/4
31/2
31/2
31/2
31/2
31/2
33/4
4
4
Double bolt length

ring
raised-face
75
90
90
95
110
110
120
145
170
190
190
220
235
255
275
285
325
350
440
455
475
485
520
540
565
605
615
635
660
690
705
75
90
90
95
110
110
120
145
170
190
195
220
235
255
280
290
335
360
455
480
500
515
545
580
595
/
/
/
/
/
/
JIS SERIES
DN
15
20
25
32
40
50
65
80
100
125
150
200
250
300
350
400
450
500
600
Size
NPS
1/2
3/4
1
11/4
11/2
2
21/2
3
4
5
6
8
10
12
14
16
18
20
24
D
mm
120
130
150
160
180
215
245
265
310
375
395
485
585
675
750
825
915
985
1170
in
4.75
5.12
5.88
6.25
7
8.5
9.62
10.5
12.25
14.75
15.5
19
23
26.5
29.5
32.5
36
38.75
46
K
mm
82.6
88.9
101.6
111.1
123.8
165.1
190.5
203.2
241.3
292.1
317.5
393.7
482.6
571.5
635
704.8
774.7
831.8
990.6
in
3.25
3.5
4
4.38
4.88
6.5
7.5
8
9.5
11.5
12.5
15.5
19
22.5
25
27.75
30.5
32.75
39
mm
35
43
51
64
73
92
105
127
157
186
216
270
324
381
413
470
533
584
692
n-L
in
1.38
1.69
2.0
2.50
2.88
3.62
4.12
5.0
6.19
7.31
8.50
10.62
12.75
15.0
16.25
18.50
21.0
23.0
27.25
mm
4-22
4-22
4-26
4-26
4-29
8-26
8-29
8-32
8-35
8-42
12-39
12-45
12-51
16-55
16-60
16-68
16-74
16-80
16-94
mm
in
22.5
4-0.88
25.5
4-0.88
29
4-1
29
4-1
32
4-1.12
38.5
8-1
41.5
8-1.12
48
8-1.25
54
8-1.38
73.5
8-1.62
83
12-1.50
92
12-1.75
108
12-2
16-2.12 124
16-2.38 133.5
16-2.62 146.5
16-2.88 162
16-3.12 178
16-3.62 203.5
58
Double bolt length

ring
raised-face
110
110
115
115
125
125
125
125
140
140
145
146
160
160
180
180
195
195
250
250
265
260
325
290
345
335
385
375
425
405
470
445
525
495
565
540
650
615
GENERAL VALVE

API Standard Valve

Uploaded by

Copyright:

Available Formats

API Standard Valve

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

API Standard Valve

Uploaded by

Copyright:

Available Formats

API Steel Gate Valve

API Globe Valve

API Check Valve

API Floating Ball Valve

API Trunnion Ball Valve

API Butterfly Valve

API Forged steel gate valves

API Forged steel globe valves

API Forged steel check valves

Steel Gate Valve

Gasket of Cover Flange

Molded flexible graphite is used for packing material. PTFE or

You are center of our world

Back Seating Design

API Gate Valve

Design and Manufacture: Cast steel gate valve to API600ISO

API Steel Gate Valve

API Steel Gate Valve

Body and Bonnet Connection

Belleville Spring Loaded Packing

API600 Trim material

If being requested by the customer, the Belleville spring loaded

Besides the common gate valves, We also makes cryogenic

Carbon Steel to ASTM

Alloy Steel to ASTM

Stainless Steel to ASTM

A439 D2 / B148 952A

Special Gate Valve

Stem & backseat

Suitable for H2S service and meet requirement of NACE MR 0175.

You are center of our world

Usually, the stem nut is made of copper alloy. it is also can be

Gate Valves with NPS 2 are of wedge flexible gate;

You are center of our world

API Steel Gate Valve

API Steel Gate Valve

API598 Pressure Test

API598 Pressure Test

Main size of outside & weight

You are center of our world

You are center of our world

Main size of outside & weight

API Steel Gate Valve

API Steel Gate Valve

API598 Pressure Test

API598 Pressure Test

Main size of outside & weight

Main size of outside & weight

You are center of our world

You are center of our world

API Steel Globe Valve

API Steel Globe Valve

Steel Globe Valve

Bolted Bonnet; Outside Screw and Yoke; Rising stems; Metallic

The body and bonnet of Class150Class900 globe valves

Gasket of Cover Flange

Stainless steel + flexible graphite wounded gasket is used for

The stem is of integral forged design. The minimum diameter

Special Globe Valve