2011 Commander 280 Elec Tech Spec
2011 Commander 280 Elec Tech Spec
2011 Commander 280 Elec Tech Spec
PRODUCT SPECIFICATION
CONFIGURATION HIGHLIGHTS Battery Charger: PowerWise 36QE high frequency, fully line compensating. 10 ft (3 m) DC Cord.Underwriters Lab. (U.L.) Listed, (C.S.A. Certified) l Output: 36 Volt at 16 amps. DC l Input: 110 120 Volt, 50/60 Hz, 8 amp Motor: Drive Train: Electrical System: Transaxle: Brakes: Cargo Bed: 36 Volt DC series wound, brazed armature, solid copper windings Direct motor shaft connected to transaxle pinion shaft 36 Volt DC, six, 6 volt deep cycle batteries (115 minute minimum, 225 amp-hour @ 20 hr. discharge rate) Differential with helical gears Dual rear wheel mechanical self-adjusting drum brakes. Automatic single point park brake release with self-compensating system Roto-molded cross-linked polyethelene. Lifts for access to powertrain. Removable hinged multi-position tailgate requires no latch mechanism
PRODUCT OVERVIEW
Dimensions Overall Length Overall Width Overall Height (No Canopy) Overall Height (With Canopy) Wheel Base Front Wheel Track Rear Wheel Track Gnd Clearance @ Differential Cargo Box Width (inside) Cargo Box Length (inside) Cargo Box Depth (inside) Cargo Box Capacity Cargo Box material Vehicle Power Power Source Motor Type Horsepower (kW) Electrical System Batteries (Qty, Type) Key or Pedal Start Battery Charger Speed Controller Drive Train Transaxle Gear Selection Rear Axle Ratio Performance Seating Capacity Dry Weight Curb Weight Bed Load Capacity Vehicle load capacity Outside Clearance Circle Intersecting Aisle Clearance Speed (Level Ground) Towing Capacity Steering & Suspension Steering Front Suspension Rear Suspension Service Brake Parking Brake Front Tires Rear Tires Body & Chassis Frame Front Body & Finish Rear Body & Finish Standard Color
103.0 in (262 cm) 46.5 in (119 cm) 48.6 in (123 cm) (Top of steering wheel) 68.0 in (173 cm) 65.5 in (166 cm) 37.0 in (94 cm) 38.0 in (97 cm) 4.3 in (11 cm) 44.5 in (113 cm) 30.5 in (77 cm) 7.5 in (19 cm) 5.9 cu ft (0.17 m3) Roto-molded polyethylene 36 Volts DC Series Wound 2.5 hp (1.9 kW) @ 2700 rpm 36 Volt Six, 6 Volt Deep Cycle Pedal Start 36 V PowerWise QE, 120 VAC, UL & CSA Solid State 300 Amp Rated Motor Shaft Direct Drive Differential with helical gears Forward-Neutral-Reverse 12.44:1
2 Person 675 lb (310 kg) (Without Batteries) 1040 lb (64 kg 500 lb (230 kg) 800 lb (360 kg) 18.9 ft (5.76 m) N/A 13 mph 0.5 mph (21 kph 0.8 kph) 500 lb (230 kg) max load Self-compensating rack and pinion Leaf springs with hydraulic shock absorbers Leaf springs with hydraulic shock absorbers Rear wheel mechanical self-adjusting drum Self-compensating, single point engagement 5.70 x 8 - 8 (Load Range C) 5.70 x 8 - 8 (Load Range C) Welded steel with DuraShield powder coating Injection Molded TPO Steel. Base coat/clear coat Ivory
l l l l l l l l l l l l l l l l l l l l l
l l l l l l l l l l l l l l l l
Material
Handling
and
Fleet Management
Specialist
contact@forkliftsystems.com www.forkliftsystems.com
Contact Info
MAILING ADDRESS
Forklift Systems Incorporated 884 Elm Hill Pike Nashville, TN 37210
CONTACT INFO
Phone: 615-255-6321 Toll Free: 800-752-1882 Email: contact@forkliftsystems. com Web: www.forkliftsystems.com
SOCIAL MEDIA
Click Map to Open Google Map of Location Tennessee Main Office: 884 Elm Hill Pike, Nashville,TN 37210 (615) 255-6321
Click Map to Open Google Map of Location Alabama Main Office: 132 West Park Drive, Birmingham, AL 35211 (205) 945-1112
Other Products
Electric Pallet Trucks Large Capacity Forklifts I.C. & Electric Forklifts
Personnel Shuttles
Burden Carriers
contact@forkliftsystems.com
www.forkliftsystems.com