2011 Cushman Minute Miser Tech Spec
2011 Cushman Minute Miser Tech Spec
2011 Cushman Minute Miser Tech Spec
PRODUCT SPECIFICATION
CONFIGURATION HIGHLIGHTS Speed Control: Solid State 250 amp controller l Direction Selector: Dash mounted (Forward-Neutral-Reverse)
l Batteries:
Battery Charger: 24 Volt On-Board. Fully Automatic line compensating. Underwriters Laboratories (U.L.) Listed, (C.S.A. Certified) l Input: 110 120 Volt, 60 Hz, 8.5 amp l Output: 24 Volt at 25 amps. DC Motor: Drive Train: Electrical System: Transaxle: Brakes: Convenience: Steering: 24 Volt DC series wound, brazed armature, solid copper armature.1.5 hp (1.1 kW) @ 2800 rpm, 4.3 hp (3.2 kW) @ 1200 rpm Direct motor shaft connected to transaxle pinion shaft 24 Volt DC, four, 6 volt deep cycle batteries (115 minute minimum, 225 amp-hour @ 20 hr. discharge rate) Differential with helical gears Dual rear wheel mechanical drum brakes. Integrated park brake Seat back folds down to accommodate single rear facing passenger Steering tiller with horn switch. Optional steering wheel
PRODUCT OVERVIEW
Dimensions Overall Length Overall Width Overall Height (Tiller) Overall Height (Steering Whl) Wheel Base Front Wheel Track Rear Wheel Track Gnd Clearance @ Differential Cargo Deck Width Cargo Deck Length Cargo Deck Depth Cargo Deck Material Vehicle Power Power Source Motor Type Horsepower (kW) Electrical System Batteries (Qty, Type) Key or Pedal Start Battery Charger Speed Controller Drive Train Transaxle Gear Selection Rear Axle Ratio Performance Capacity Dry Weight Curb Weight Cargo Deck Load Capacity Vehicle load capacity Outside Clearance Circle Intersecting Aisle Clearance Speed (Level Ground) Steering & Suspension Steering Front Suspension Rear Suspension Service Brake Parking Brake Front Tire Rear Tires Body & Chassis Frame & Body Body & Finish Standard Color
85.0 in (216 cm) 30.0 in (76 cm) 39.0 in (99 cm) 46.0 in (117 cm) 48.0 in (122 cm) N/A 25.5 in (65 cm) 4.0 in (10 cm) 23.0 in (58 cm) 29.0 in (73 cm) 4.0 in (10 cm) Plywood 24 Volts DC Series Wound 1.5 hp (1.1 kW) @ 2800 rpm 24 Volt Four, 6 Volt Deep Cycle Pedal Start 24 VDC, 120 VAC On-Board, UL & CSA Solid State 250 Amp Rated Motor Shaft Direct Drive Differential with Helical Gears Dash Mounted Forward-Neutral-Reverse 14.78:1
2 Persons (Seat Back Down) 490.0 lb (225 kg) (Without Batteries) 740.0 lb (335 kg) 300 lb (140 kg) 550 lb (250 kg) 10.8 ft (3.3 m) 54.0 in (137 cm) 10 mph 0.5 mph (14 kph 0.8 kph) Direct Handlebar to Front Fork Torque Block Coil Springs & Single Shock Absorber Rear Wheel Mechanical Drum Single Point Latch 4.80 x 8 (Load Range B) 4.80 x 8 (Load Range B) Welded steel with DuraShield powder coat Diamond plate pattern. Polyester primer/Acrylic Yellow
l l l l
l l l l l l l l l l
Material
Handling
and
Fleet Management
Specialist
contact@forkliftsystems.com www.forkliftsystems.com
Contact Info
MAILING ADDRESS
Forklift Systems Incorporated 884 Elm Hill Pike Nashville, TN 37210
CONTACT INFO
Phone: 615-255-6321 Toll Free: 800-752-1882 Email: contact@forkliftsystems. com Web: www.forkliftsystems.com
SOCIAL MEDIA
Click Map to Open Google Map of Location Tennessee Main Office: 884 Elm Hill Pike, Nashville,TN 37210 (615) 255-6321
Click Map to Open Google Map of Location Alabama Main Office: 132 West Park Drive, Birmingham, AL 35211 (205) 945-1112
Other Products
Electric Pallet Trucks Large Capacity Forklifts I.C. & Electric Forklifts
Personnel Shuttles
Burden Carriers
contact@forkliftsystems.com
www.forkliftsystems.com