Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • Construction Specifications

    Uploaded by

    Jeffrey Carlo Viduya Agliam
    35 views3 pages
    This section specifies the requirements for applying painted traffic markings at a construction site. It describes the materials used, including spray plastic made of aggregate, pigment and binder meeting AASHTO standards. Glass beads must also meet specifications for size, shape and clarity. The plastic is to be applied in lines or symbols using a mobile sprayer at a temperature between 200-220 degrees Celsius. A further quantity of glass beads must be sprayed onto the hot plastic to result in over 450 grams of beads per square meter. The finished lines must be uniform, level and free of defects.

    Original Description:

    manual

    Original Title

    02577

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    This section specifies the requirements for applying painted traffic markings at a construction site. It describes the materials used, including spray plastic made of aggregate, pigment and binder meeting AASHTO standards. Glass beads must also meet specifications for size, shape and clarity. The plastic is to be applied in lines or symbols using a mobile sprayer at a temperature between 200-220 degrees Celsius. A further quantity of glass beads must be sprayed onto the hot plastic to result in over 450 grams of beads per square meter. The finished lines must be uniform, level and free of defects.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as doc, pdf, or txt
    35 views3 pages

    Construction Specifications

    Uploaded by

    Jeffrey Carlo Viduya Agliam
    This section specifies the requirements for applying painted traffic markings at a construction site. It describes the materials used, including spray plastic made of aggregate, pigment and binder meeting AASHTO standards. Glass beads must also meet specifications for size, shape and clarity. The plastic is to be applied in lines or symbols using a mobile sprayer at a temperature between 200-220 degrees Celsius. A further quantity of glass beads must be sprayed onto the hot plastic to result in over 450 grams of beads per square meter. The finished lines must be uniform, level and free of defects.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as doc, pdf, or txt
    of 3

    DIVISION 2 - SITE WORK SECTION 02577 - STREET MARKING PART 1 - GENERAL 1.

    01 DESCRIPTION This Section covers providing the WORK required to apply painted traffic markings as shown on the Construction Drawings and specified herein, and as required to complete the WORK acceptable to Company Representative. 1.02 Reference Codes and Standards: Comply with applicable SAUDI ARAMCO Engineering and Drafting Standards, Municipals and Codes and Standards as specified herein.

    PART 2 - MATERIALS 2.01 SPRAY PLASTIC MATERIAL A. Spray plastic material shall consist of a light-colored aggregate, pigment and extender bound together with a thermoplastic resin, plasticised as necessary. The composition of the materials as laid, that is including the spray on glass beads, shall be according to AASHTO Designation M-249 with modification for the white 20-2.0 for the binder and 52 maximum for the calcium carbonate and inert fillers (that include the aggregates). The 20% glass bead is to be 10% pre-mixed and the other 10% is to be applied by pressure application. The proportioning of the various ingredients shall be such that the final product, when in molten state can be sprayed readily onto the road surface to give an even line of good definition.

    B. C.

    2.02

    AGGREGATE The aggregate shall consist of white silica sand, crushed calcite, calcined flint or quartz.

    2.03

    GLASS BEADS Glass beads shall be free from air inclusions. Refractive index 1.5 minimum and spheres percent 90 minimum. A. Gradation for Pre-Mix Sieve No. 12 No. 13 Percent Passing by Weight 100% 5 maximum

    SECTION 02577
    CONSTRUCTION SPECIFICATIONS
    DOC

    SABG GIRLS ELEMENTARY SCHOOL AND BOYS INTERMEDIATE SCHOOL MUBARRAZ AND HOFUF

    089/ 090

    A 2050

    BE-315756

    1 of 3

    Glass beads sprayed onto the surface of the line shall conform to the following grading: B. Gradation For Pressure Application Sieve No. 12 No. 30 No. 40 No. 50 No. 80 No. 200 Percent Passing 100% 85 - 100 45 - 100 10 - 45 0 - 20 0-5

    Not less than 90% of the glass beads shall be transparent glass, reasonably spherical and free from flaws. Glass beads shall be in accordance with AASHTO Designation M-247, except as modified below. 2.04 PIGMENT EXTENDER The extender shall be calcium carbonate prepared from natural chalk. The total content of pigment and extender shall be between 18 and 22%. 2.05 BINDER The binder shall be based predominantly on synthetic hydrocarbon resins plasticised with mineral oil. The viscosity and wetting properties of the molten binder at the spraying temperature will be such as to give a composition of satisfactory spraying properties. 2.06 PROPERTIES Unless otherwise specified herein, all tests shall be in accordance with the applicable ASSHTO Designation M-247. Spray plastic shall have an open flash point exceeding 235 degrees C. PART 3 - EXECUTION 3.01 GENERAL Application shall be by self-propelled mobile sprayer, or template. The road surface shall be dry and free from loose mud and other extraneous matter. The drying time shall not be more than 10 minutes, in the laboratory test. The spray plastic shall be used at temperatures between 200 - 220 degrees C. 3.02 RATE OF APPLICATION Spray plastic shall be applied in intermittent or continuous lines or arrows, etc. of thickness not less than 1.5 mm excluding glass beads referred to below.

    SECTION 02577
    CONSTRUCTION SPECIFICATIONS
    DOC

    SABG GIRLS ELEMENTARY SCHOOL AND BOYS INTERMEDIATE SCHOOL MUBARRAZ AND HOFUF

    089/ 090

    A 2050

    BE-315756

    2 of 3

    In addition to the glass beads included in the materials, a further quantity of glass beads shall be sprayed on the hot spray plastic line at the time of application. The application shall be pressurized and result in a residual quantity of glass not less than 450 grams/sq.m. 3.03 FINISH The finished lines shall be free from raggedness on sides and ends and be in true plane with the general alignment of the street. The upper surface of the lines shall be level, uniform and free from streaks or cracks. END OF SECTION

    SECTION 02577
    CONSTRUCTION SPECIFICATIONS
    DOC

    SABG GIRLS ELEMENTARY SCHOOL AND BOYS INTERMEDIATE SCHOOL MUBARRAZ AND HOFUF

    089/ 090

    A 2050

    BE-315756

    3 of 3

    You might also like