Professional Documents
Culture Documents
Etd
Etd
as voltages, current ratings and frequency, quantities and units, nomenclature,graphical symbols, basic marking and general requirements for enclosures of equipment.
Sl. No. IS Number/ DOC Number Title Reaffirm Date Am
STANDARDS PUBLISHED 1 2 3 4 5 6 IS 1885(Part 1):1961 IS 1885(Part 9):1992 / IEC 60050(446):1983 IS 1885(Part 10):2008 / IEC 60050(448):1995 IS 1885(Part 11):1966 IS 1885(Part 14):1967 IS 1885(Part 15):2008 / IEC 60050(482):2004 Electrotechnical vocabulary: Part 1 Fundamental definitions Electrotechnical Vocabulary: Part 9 Electrical relays (second revision) Electrotechnical Vocabulary: Part 10 Power system protection (second revision) Electrotechnical vocabulary: Part 11 Electrical measurements Electrotechnical vocabulary: Part 14 Nuclear power plants Electrotechnical vocabulary: Part 15 Primary and secondary cells and batteries (second revision) [Amalgamating IS 1885(Part 8):1986] Electrotechnical vocabulary: Part 16 Lighting, Section 1 General aspects Electrotechnical vocabulary: Part 16 Lighting, Section 2 General illumination, lighting fittings and lighting for traffic and signalling Electrotechnical vocabulary: Part 16 Lighting, Section 3 Lamps and auxiliary apparatus Electrotechnical vocabulary: Part 17 Switchgear and controlgear (first revision) Electrotechnical Vocabulary: Part 27 Power electronics (Third Revision) Electrotechnical vocabulary: Part 28 Instrument transformers (first revision) Electrotechnical vocabulary: Part 29 Mining terms Electrotechnical vocabulary: Part 30 Overhead transmission and distribution of electrical energy Electrotechnical Vocabulary: Part 32 Electric cables (first revision) Mar 2009 Jul 2007 Jul 2007 Jul 2007 Jul 2007 Jul 2007 Jul 2007 Jul 2007 Jul 2007 2
7 8
Jul 2007
10 11 12 13 14
IS 1885(Part 17):1979 IS 1885(Part 27):2008 / IEC 60050(551):1998 IS 1885(Part 28):1993 / IEC 60050(321):1986 IS 1885(Part 29):1971 IS 1885(Part 30):1971
Jul 2007
15
Mar 2009
16 17 18 19
IS 1885(Part 34):1972 IS 1885(Part 35):1993 / IEC 60050(411):1996 IS 1885(Part 37):1993 / IEC 60050(691):1973 IS 1885(Part 38):1993 / IEC 60050(421):1990 IS 1885(Part 42):1993 / IEC 60050(436) :1990 IS 1885(Part 43):1977 IS 1885(Part 49):1978 IS 1885(Part 51):1993 / IEC 60050(841):1983 IS 1885(Part 53):1980 IS 1885(Part 54):1993 / IEC 60050(471):1984 IS 1885(Part 55):1981 IS 1885(Part 57):2008 / IEC 60050(131):2002 IS 1885(Part 60):1993 / IEC 60050(426):1990 IS 1885(Part 61):1985 IS 1885(Part 62):1993 / IEC 60050(212):1990 IS 1885(Part 69):1993 / IEC 60050(602):1983 IS 1885(Part 70):1993 / IEC 60050(604):1987 IS 1885(Part 71):1993 / IEC 60050(605):1983 IS 1885(Part 72):2008 / IEC 60050 (101):1998
Electrotechnical vocabulary: Part 34 Cinematography Electrotechnical vocabulary: Part 35 Rotating machinery (first revision) Electrotechnical vocabulary: Part 37 Tariffs for electricity (first revision) Electrotechnical vocabulary: Part 38 Power transformers and reactors (second revision) Electrotechnical Vocabulary: Part 42 Power capacitors (second revision) Electrotechnical vocabulary: Part 43 Electrical equipment used in medical practice Electrotechnical vocabulary: Part 49 Industrial process measurement and control Electrotechnical vocabulary: Part 51 Industrial electro-heating Electrotechnical vocabulary: Part 53 Mica (superseding IS:1174) Electrotechnical Vocabulary: Part 54 Insulators (First revision) Electrotechnical vocabulary: Part 55 Electric fans Electrotechnical vocabulary: Part 57 Circuit Theory (Second Rrevision) Electrotechnical Vocabulary: Part 60 Electrical apparatus for explosive atmospheres (first revision) Electrotechnical vocabulary: Part 61 Nuclear medical instruments Electrotechnical vocabulary: Part 62 Solid insulating materials (first revision) Electrotechnical Vocabulary: Part 69 Generation, transmission and distribution of electricity - Generation Electrotechnical Vocabulary: Part 70 Generation, transmission and distribution of electricity - operation Electrotechnical Vocabulary: Part 71 Generation,transmission and distribution of electricity - Substations Electrotechnical Vocabulary : Part 72 Mathematics (First Revision)
20 21 22 23 24 25 26 27 28
Mar 2009 Jul 2007 Jul 2007 Jul 2007 Jul 2007 Mar 2009 Jul 2007
Mar 2009
29 30 31
32
Mar 2009
33
Mar 2009
34
35
IS 1885(Part 73/Sec 1):1993 / IEC60050(111-):1984 IS 1885(Part 73/Sec 2):1993 / IEC 60050(111-):1984 IS 1885(Part 73/Sec 3):1993 / IEC 60050:(111-3):77 IS 1885(Part 74):1978 / IEC 60050(151): 1978 IS 1885(Part 75):1993 / IEC 60050(351) 1975 IS 1885(Part 76):1993 / IEC 60050(431):1980 IS 1885(Part 77):1993 / IEC 60050(466): 1990 IS 1885(Part 78):1993 / IEC 60050(601):1985 IS 1885(Part 79):1993 / IEC 60050(603):1986 IS 1885(Part 80):1994 / IEC 60050(301):1983 IS 1885(Part 81):1993 / IEC 60050(302):1983 IS 2032(Part 15):1976 IS 2032(Part 19):1977 IS 2032(Part 25):1980 IS 3599:1966 IS 3722(Part 1):1983 | IEC 60027-1(1992)
Electrotechnical vocabulary: Part 73 Physics and Chemistry, Section 1 Physical concepts Electrotechnical Vocabulary: Part 73 Physics and chemistry Section 2 Electrotechnical concepts Electrotechnical Vocabulary: Part 73 Physics and chemistry Section 03 Concepts related to quantities and units Electroechnical Vocabulary: Part 74 Electrical and magnetic devices Electrotechnical Vocabulary: Part 75 Automatic control Electrotechnical vocabulary: Part 76 Transducers Electrotechnical Vocabulary: Part 77 Overhead lines Electrotechnical Vocabulary: Part 78 Genereation, transmission and distribution of electricity - General Electrotechnical Vocabulary: Part 79 Generation, transmission and distribution of electiricity - Power system planning and management Electrotechnical vocabulary: Part 80 General terms on measurements in electricity Electrotechnical vocabulary: Part 81 Electrical measuring instruments Graphical symbols used in electrotechnology: Part 15 Aircraft electrical symbols Graphical symbols used in electrotechnology: Part 19 Electrical equipment used in medical practice Graphical symbols used in electrotechnology: Part 25 Electrical installations in ships Methods of measurement of cooling medium temperature for electrical apparatus Letter symbols and signs used in electrical technology: Part 1 General guidance on symbols and subscripts (first revision) Letter symbols and signs used in electrical technology: Part 2 Reference tables for symbols and subscripts (first revision) Guide for marking of insulated conductors (first revision)
Mar 2009
36
Mar 2009
37
Mar 2009
38 39 40 41 42
Mar 2009 Mar 2009 Mar 2009 Mar 2009 Mar 2009
43
Mar 2009
44 45 46 47 48 49 50
Mar 2009 Mar 2009 Jul 2007 Jul 2007 Mar 2009 Mar 2009 Jul 2007
51
Jul 2007
52
Mar 2006
53 54 55
IS 7118:1973 * IS 7691:1975 | IEC 600113-1(71) IS 8270(Part 1):1976 | IEC 60113-1(71) IS 8270(Part 2):1976 | IEC 60113-2(71) IS 8270(Part 3):1977 | IEC 60113-2(71) IS 8270(Part 4):1977 | IEC 60113-2(71) IS 8270(Part 5):1976 | IEC 60113-2(71) IS 8270(Part 6):1983 | IEC 60113-2(71) IS 9409:1980 | IEC 61140 (2001) IS 9499:1980 | IEC 60375(72)2003 IS 9676:1980 IS 9677:1980 IS 9678:1980 IS 10381:1982
Recommendations for direction of movement for control devices operating electrical apparatus Frequencies for special power applications Guide for preparation of diagrams, charts and tables for electrotechnology: Part 1 Definitions and classification Guide for preparation of diagrams, charts and tables for electrotechnology: Part 2 Item designation Guide for preparation of diagrams, charts and tables for electrotechnology: Part 3 General requirements for diagrams Guide for preparation of diagrams, charts and tables for electrotechnology: Part 4 Circuit diagrams Guide for preparation of diagrams, charts and tables for electrotechnology: Part 5 Interconnection diagrams and tables Guide for preparation of diagrams, charts and tables for electrotechnology: Part 6 Unit wiring diagrams and tables Classification of electrical and electronic equipment with regard to protection against electric shock Conventions concerning electric and magnetic circuits Reference ambient temperature for electrical equipment Guide for limits of temperature-rise of the windings of electrical equipment when tested by different methods Methods of measuring temperature rise of electrical equipment Terms (and their Hindi equivalents) commonly used for name plates and similar data of electrical power equipment Service conditions for electrical equipment Guide for uniform system of marking and identification of conductors and apparatus terminals Guide for identification by hour numbers of the phase conductors of 3-phase electric systems Guide for colour coding of electrical mimic diagrams Preferred current ratings
56 57
58 59
60
Jul 2007
61 62 63 64 65 66
Jul 2007 Mar 2009 Mar 2009 Mar 2009 Mar 2009 Mar 2009
67 68 69 70 71
IS 10580:1983 IS 11353:1985 | IEC 60445(1973) IS 11354:1985 | IEC 60152(63) IS 11954:1987 IS 11955:1987 | IEC 60059(1999)
Jul 2007 Jul 2007 Jul 2007 Mar 2009 Mar 2009
72
Graphical symbols for diagrams in the field of electrotechnology: Part 1 General information,general index,cross reference table Graphical symbols for diagrams in the field of electrotechnology: Part 2 Symbols elements, qualifying symbols and other symbols having general application Graphical symbols for diagrams in the field of electrotechnology:Part 3 Conductors and connecting devices Graphical symbols for diagrams in the field of electrotechnology: Part 4 Passive components Graphical symbols for diagrams in the field of electrotechnology: Part 6 Production and conversion of electrical energy Graphical symbols for diagrams in the field of electrotechnology: Part 7 Switchgear, controlgear and protective devices Graphical symbols for diagrams in the field of electrotechnology: Part 8 Measuring instruments, lamps and signalling devices Graphical symbols for diagrams in the field of electrotechnology: Part 11 Architectural and topographical installation plans and diagrams
Mar 2009
73
Mar 2009
74
IS 12032(Part 3):1987 / IEC 60617-3(1983) IS 12032(Part 4):1987 / IEC 60617-4(1984) IS 12032(Part 6):1987 / IEC 60617-6(1983) IS 12032(Part 7):1987 / IEC 60617-7(1983) IS 12032(Part 8):1987 / IEC 60617-8(1983)
Mar 2009
75
Mar 2009
76
Mar 2009
77
Mar 2009
78
Mar 2009
79
IS 12032(Part 11):1987 / IEC 60617-11(1983) IS 12360:1988 | IEC 60038(1983) IS 60529:2001 / IS/IEC 60529:2001
Mar 2009
80 81
Voltage bands for electrical installations including Dec 2005 preferred voltages and frequency (superseding IS:585) Degrees of protection provided by enclosures of (IP Code) (Superseding IS 12063)
FINALISED DRAFTS UNDER PRINT 1 2 3 4 DOC.ETD 1(6143) / IS/IEC 60050-111 DOC.ETD 1(6144) / IS/IEC 60050-351 DOC.ETD 1(6145) / IS/IEC 60050-151 DOC.ETD 1(6151) / IS/IEC 600051-841 Electrotechnical Vocabulary : Part 111 Physics and Chemistry [superseding IS 1885(Part 73/Sec 1,2,3)] Electrotechnical Vocabulary:Part 351 Control Technology [superseding IS 1885(Part 75)] Electrotechnical Vocabulary Part 151 Electrical and Magnetic Device [superseding IS 1885(Part 74)] Electrotechnical vocabulary: Part 841 Industrial electroheat [superseding IS 1885(Part 51]
ETD 2 SOLID ELECTRICAL INSULATING MATERIALS AND INSULATION SYSTEMS SCOPE - To prepare standards: a) on solid electrical insulating materials. b) on guiding principles and on the philosophy of evaluation of insulation systems in general c) for functional test programmes and methods intended for evaluation of possible insulation systems and their suitability for use in electrical equipment. d) for classification of insulation systems based upon their capability to withstand the complex of the most important service determined by the conditions of the use of insulation in equipment.
Sl. No. IS Number/ DOC Number Title Reaffirm Date Am
STANDARDS PUBLISHED 1 2 3 4 5 6 7 8 9 IS 1175:1981 | ISO 67 * IS 1271:1985 | IEC 60085:1984 IS 1576:1992 IS 2259:1963 | IEC 60167(1964) IS 2260:1973 IS 2448(Part 1):1963 IS 2464:1963 IS 2584:1963 IS 2824:2007 / IEC 60112:2003 IS 3352:1965 IS 3396:1979 IS 4248:1967 IS 4249:1967 Methods for grading and classification of muscovite mica blocks, thins and films (first revision) Thermal evaluation and classification of electrical insulation (first revision) Solid pressboard for electrical purposes(first revision) Methods of test for determination of insulation resistance of solid insulating materials Preconditioning, conditioning and testing of solid electrical insulating materials (first revision) Adhesive insulating tapes for electrical purposes: Part 1 Tapes with cotton textile substrates Built-up mica for electrical purposes Method of test for electric strength of solid insulating materials at power frequencies Method for the determination of the proof and the comparative tracking indices of solid insulating materials (second revision) Varnished cotton cloth and tape for electrical purposes Methods of test for volume and surface resistivities of solid electrical insulating materials (first revision) Non-ignitable and self-extinguishing boards (with mineral base) for electrical purposes Classification and methods of tests for non-ignitable and self-extinguishing properties of solid electrical insulating materials Oct 2006 Oct 2006 Apr 2008 Apr 2008 1 1 Oct 2006 Oct 2006 Apr 2008 Oct 2005 Apr 2008 Oct 2005 Apr 2008 Oct 2006 5 1 1 1 1
10 11 12 13
14
IS 4486:1967
Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths Thin vulcanized fibre sheet (including leatheroid) for electrical purposes - Specification Vulcanized fibre sheets for electrical purposes Specification Method of test for determining deleterious substances in fibrous insulating materials Vulcanized fibre rods and tubes for electrical purposes Woven asbestos tape for electrical insulating purposes Bitumen based filling compounds for electrical purposes Methods of tests for ceramic for telecommunication and allied purposes High tension insulating cotton tape impregnated with bitumen based compound Pressure sensitive adhesive tapes for electrical purposes: Part 1 General requirements Pressure sensitive adhesive tapes for electrical purposes: Part 2 Methods of test Pressure sensitive adhesive tapes for electrical purposes: Part 3 Requirements for individual materials, Section 1 Plasticized polyvinylchloride tapes with non-thermosetting adhesive (first revision) Pressure sensitive adhesive tapes for electrical purposes: Part 3 Specifications for individual materials, Section 2 Requirements for polyester film tapes (PETP) with thermosetting adhesive Pressure sensitive adhesive tapes for electrical purposes: Part 3 Specifications for individual materials, Section 3 Polyester film tapes (PETP) with non-thermosetting adhesive Pressure sensitive adhesive tapes for electrical purposes: Part 3 Specifications for individual materials, Section 4 Cellulosic paper, creped with thermosetting adhesive Pressure sensitive adhesive tapes for electrical purposes: Part 3 Specifications for individual materials, Section 5 Cellulosic paper with thermosetting adhesive
Apr 2008
15 16 17 18 19 20 21 22 23 24 25
IS 4819:1968 IS 4820:1968 IS 5596:1970 IS 5711:1970 IS 6230:1970 IS 7084:1973 IS 7571:1974 IS 7755:1975 * IS 7809(Part 1):1975 | IEC 60454-1(1974) IS 7809(Part 2):1977 | IEC 60454-2(1974) IS 7809(Part 3/Sec 1):1986 | IEC 60454-2
Oct 2006 Oct 2006 Oct 2005 Apr 2008 Apr 2008 Mar 2008 Oct 2005 Apr 2008 Apr 2008 Oct 2006 Oct 2006 2 1 1 1
26
Oct 2006
27
Oct 2006
28
Apr 2008
29
Oct 2006
30
Guide for determination of thermal endurance properties of electrical insulating materials : Part 1 General guidelines for ageing procedures & evaluation of test results (first revision) Guide for determination of thermal endurance properties of electrical insulating materials: Part 2 List of materials and available tests Guide for determination of thermal endurance properties of electrical insulating materials: Part 3 Statistical methods Guide for determination of thermal endurance properties of electrical insulating materials: Part 4 Instructions for calculating the thermal endurance profile Methods of test for determining electrolytic corrosion with insulating materials Press paper for electrical purposes Method for grading (by size) of phlogopite mica blocks, thins and splittings Method of measuring thickness of mica blocks, thins, films and splittings Thermal classification of phlogopite mica splittings Insulating materials based on built-up mica or treated mica paper: Part 1 Definitions and general requirements Insulating materials based on built-up mica or treated mica paper: Part 2 Methods of test (first revision) Insulating materials based on built-up mica or treated mica paper: Part 3 Specifications for individual materials, Section 1 Rigid mica material for commutator separators Insulating materials based on built-up mica or treated mica paper: Part 3 Specifications for individual materials, Section 2 Moulding mica materials for electrical purposes Insulating materials based on built-up mica or treated mica paper: Part 3 Specifications for individual materials, Section 3 Flexible mica flake tape for insulation of electrical machines Insulating materials based on built-up mica or treated mica paper: Part 3 Specifications for individual materials, Section 4 Rigid mica materials for heating equipment
** INDICATES STANDARDS TO BE REVISED | INDICATES EQUIVALENT STANDARDS 8
Apr 2009
31
* IS 8504(Part 2):1983 | IEC 60216-2(1974) IS 8504(Part 3):1994 | IEC 60216-3 * IS 8504(Part 4):1994 | IEC 60216-3
Oct 2005
32
Apr 2009
33
Apr 2009
34 35 36 37 38 39
* IS 8516:1977 | IEC 60426 IS 8570:1977 IS 9043:1979 | ISO 444(1965) IS 9044:1979 | ISO 5972(1978) IS 9045:1979 | ISO 5023(1977) * IS 9299(Part 1):1979 | IEC 60371-1(1972) * IS 9299(Part 2):1992 | IEC 60371-2(1987) * IS 9299(Part 3/Sec 1):1979 | IEC 60371-3-1(1973)
Oct 2006 Oct 2006 Oct 2006 Oct 2006 Oct 2006 Oct 2006
40 41
42
Oct 2006
43
Apr 2008
44
Apr 2008
45
Insulating materials based on built up mica or treated mica paper: Part 3 Specification for individual materials, Section 5, Flexible mica materials in sheet form Insulating materials based on built-up mica or treated mica paper: Part 3 Specifications for individual materials, Section 6 Glass backed mica paper with B-stage epoxy resin bond Insulating materials based on built-up mica or treated mica paper: Part 3 Specification for individual material, Section 7 Mica paper Cellulosic papers for electrical purposes: Part 1 Definitions and general requirements Cellulosic papers for electrical purposes: Part 2 Methods of test (superseding IS:2188) Cellulosic papers for electrical purposes: Part 3 Specifications for individual materials, Section 1 General purposes electrical paper Cellulosic papers for electrical purposes: Part 3 Specifications for individual materials, Section 2 Capacitor paper Cellulosic papers for electrical purposes: Part 3 Specifications for individual materials, Section 3 Crepe paper Cellulosic papers for electrical purposes: Part 3 Specifications for individual materials, Section 4 Electrolytic capacitor paper Cellulosic papers for electrical purposes: Part 3 Specifications for individual materials, Section 5 Special papers Classification of muscovite mica blocks, thins and films based on electrical properties Muscovite mica components for electronic equipment Test methods for evaluating resistance to tracking and erosion of electrical insulating materials used under severe ambient conditions Insulating varnishes containing solvents: Part 1 Definitions and general requirements (first revision) Insulating varnishes containing solvents: Part 2 Methods of tests(first revision) Insulating varnishes containing solvents: Part 3 Specifications for individual materials, Section1Requirements for cold curing varnishes (first revision)
Apr 2008
46
Apr 2008
47
Apr 2008
48 49 50
IS 9335(Part 1):1979 | IEC 60554-1(1977) IS 9335(Part 2):1998 / IEC 60554-2(2001) IS 9335(Part 3/Sec 1):1984 | IEC 60554-3-1 IS 9335(Part 3/Sec 2):1985 | IEC 60554-3-2 IS 9335(Part 3/Sec 3):1984 | IEC 60554-3-3(1980) IS 9335(Part 3/Sec 4):1984 | IEC 60554-3-4(1979) IS 9335(Part 3/Sec 5):1985 | IEC 60554-3-5 IS 9455:1980 IS 9502:1980 | ISO 5816-1(1979) * IS 9947:1981 | IEC 60587(1977) * IS 10026(Part 1):1998 | IEC 60464-1(1976) * IS 10026(Part 2):1999 | IEC 60464-2(19860 * IS 10026(Part 3/Sec 1):1999 | IEC 60464-3-1(1986)
51
Oct 2006
52
Oct 2006
53
Oct 2006
54
Oct 2006
55 56 57
58 59 60
61
Insulating varnishes containing solvents: Part 3 Specifications for individual materials, Section 2 Requirements for hot curing varnishes (first revision) Insulating varnishes containing solvents: Part 3 Specifications for individual materials, Section 3 Air drying varnishes with temperature index 130 Insulating varnishes containing solvents: Part 3 Specifications for individual materials, Section 4 Baking varnishes with temperature index 120 Insulating varnishes containing solvents: Part 3 Specifications for individual materials, Section 5 Baking varnishes with temperature index 130 Insulating varnishes containing solvents: Part 3 Specifications for individual materials, Section 6 Baking varnishes with temperature index 155 Insulating varnishes containing solvents: Part 3 Specifications for individual materials, Section 7 Baking varnishes with temperature index 180 Insulating varnishes containing solvents: Part 3 Specifications for individual materials, Section 8 Baking varnishes with temperature index 200 Insulating varnishes containing solvents: Part 3 Specifications for individual materials, Section 9 Baking varnishes with temperature index 130 for magnetic core sheets Recommended methods of tests for the determination of dielectric properties of insulating materials at frequencies above 300 MHz: Part 1 General Synthetic resin bonded glass fibre (SRBGF) sheets for electrical purposes Epoxy resin systems for cast resin insulated power and control cable joints and terminations upto and including 11 kV Methods of test for determination of ionic impurities in electrical insulating materials by extraction with liquids Guide for evaluation of insulation systems of electrical equipment: Part 1 Identification, evaluation and ageing mechanisms Guide for evaluation of insulation systems of electrical equipment: Part 2 Thermal endurance test procedure Guide for evaluation of insulation systems of electrical equipment: Part 3 Electrical endurance test procedures, Section 1 General considerations and evaluation procedures based on normal distributions
Jan 2009
62
Oct 2006
63
Oct 2006
64
Oct 2006
65
Oct 2006
66
Oct 2006
67
Apr 2008
68
Apr 2008
69
Apr 2008
70 71
IS 10192:1982 IS 10333:1982
72 73
IS 10581:1983 | IEC 60589(1977) IS 11182(Part 1):1984 | IEC 60505(1975) IS 11182(Part 2):1984 | IEC 60611(1978) IS 11182(Part 3/Sec 1):1986 | IEC 60727-1(1982)
74 75
76
Guide for evaluation of insulation systems of electrical equipments: Part 3 Electrical endurance test procedures Section 2 evaluation procedure based on extreme value distribution Guide for evaluation of insulation system of electrical equipment: Part 5 Mechanical endurance functional tests Guide for evaluation of insulation systems of electrical equipment: Part 6 Performance evaluation based on service experience and functional tests Guide for evaluation of insulation systems of electrical equipment: Part 7 Multifactor functional testing, Section 1 Test procedures Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges Method of test for determination of thermal endurance of insulating varnishes: Part 1 Electric strength method Method of test for determination of thermal endurance of insulating varnishes: Part 2 Measurement of loss of mass Methods of test for determination of thermal endurance of insulating varnishes: Part 3 Bond strength by helical coil method Varnished fabrics for electrical purposes: Part 1 Definitions and general requirements Varnished fabrics for electrical purposes: Part 2 Methods of tests Varnished fabrics for electrical purposes: Part 3 Specifications for individual materials, Section 1 Glass fabric backed varnished fabrics Plastic films for electrical purposes: Part 1 Definitions and general requirements Plastic films for electrical purposes: Part 2 Methods of test (first revision) Plastic films for electrical purposes: Part 3 Specifications for individual materials, Section 1 Polypropylene film for capacitors (first revision) Plastic films for electrical purposes: Part 3 Specifications for individual materials, Section 2 Metallized polypropylene films Plastic films for electrical purposes:Part 3 Specifications for individual materials,Section 3 Requirements for balanced biaxially oriented Polyethylene Terephalate(PET) films used for electrical insulation
Oct 2006
77
Dec 2008
78
Oct 2006
79
Oct 2006
80
Oct 2006
81 82
83
IS 11256(Part 3):1985 | IEC 60290(1969) IS 11297(Part 1):1985 IS 11297(Part 2):1988 IS 11297(Part 3/Sec 1):1988
Oct 2006
84 85 86
87 88 89
IS 11298(Part 1):1985 | IEC 60674-1(1980) IS 11298(Part 2):1999 / IEC 60674-2(1988) IS 11298(Part 3/Sec 1):1991
90
Jan 2009
91
Jul 2008
92
Plastic films for electrical purposes: Part 3 Specification for individual materials, Section 4 Requirements for polycabonate (PC) films used or electrical insulation Plastic films or electrical purposes: Part 3 Specification for individual materials, Section 8 Requirements for fluoroethylene (FEP) films used for electrical insulation Plastic Films for Electrical Purposes Part 3 Specification for Individual Materials Section 5-7 Requirements for Polyimide Films Flexible insulating sleeving: Part 1 Definitions and general requirements Flexible insulating sleeving: Part 2 Methods of tests Flexible insulating sleeving: Part 3 Specifications for individual types of sleevings, Section 1 General purpose grade sleeving with temperature index 90
Jul 2008
93
Jul 2008
94
IS 11298(Part 3/Sec 5-7):1998 / IEC60674-3-4to6(1993 IS 11654(Part 1):1986 | IEC 60684-1(1980) IS 11654(Part 2):1986 IS 11654(Part 3/Sec 1):1988
Jul 2008
95 96 97
98
IS 11654(Part 3/Sec 103):1989 Flexible insulating sleevings: Part 3 Specifications for individual types of sleevings, Section 103 General purpose grade sleeving with unilateral tolerances with temperature index 90 IS 11654(Part 3/Sec 403):1989 Flexible insulating sleeving: Part 3 Specifications for individual types of sleevings, Section 403 Glass textile sleeving with acrylic based coating - High breakdown strength IS 11654(Part 3/Sec 404):1989 Flexible insulating sleeving: Part 3 Specifications for individual types of sleevings, Section 404 Glass textile sleeving with acrylic based coating - Medium breakdown strength IS 11654(Part 3/Sec 405):1989 Flexible insulating sleeving: Part 3 Specifications for individual types of sleevings, Section 405 Glass textile sleeving with acrylic based coating - Lower breakdown strength IS 11654(Part 3/Sec 406):1989 Flexible insulating sleeving: Part 3 Specifications for individual type of sleevings, Section 406 Glass textile sleeving with PVC based coating - High breakdown strength IS 11654(Part 3/Sec 407):1989 Flexible insulating sleeving: Part 3 Specifications for individual type of sleevings, Section 407 Glass textile sleeving with PVC based coating - Medium breakdown strength IS 11654(Part 3/Sec 408):1989 Flexible insulating sleeving: Part 3 Specifications for individual type of sleevings, Section 408 Glass textile sleeving with PVC based coating - Lower breakdown strength IS 11731(Part 1):1986 | IEC 60107(1981) Methods of test for determination of flammability of solid electrical insulating materials when exposed to an igniting source: Part 1 Horizontal specimen method
** INDICATES STANDARDS TO BE REVISED | INDICATES EQUIVALENT STANDARDS 12
Oct 2005
99
Oct 2005
100
Oct 2005
101
Oct 2005
102
Oct 2005
103
Oct 2005
104
Oct 2005
105
Oct 2006
106
IS 11731(Part 2):1986 | IEC 60707(1981) IS 11755:1986 | IEC 60345(1971) IS 11756:1986 | IEC 60648(1979) IS 12316(Part 1):1988 IS 12316(Part 2):1988 IS 12316(Part 3/Sec 1):1988
Methods of test for determination of flammability of solid electrical insulating materials when exposed to an igniting source: Part 2 Vertical specimen method Method of test for determination of electrical resistance and resistivity of insulating materials at elevated temperatures Method of test for co-efficients of friction of plastic film and sheeting for use as electrical insulation Non-cellulosic papers for electrical purposes: Part 1 Definitions and general requirements Non-cellulosic papers for electrical purposes: Part 2 Methods of test Non-cellulosic papers for electrical purposes: Part 3 Requirements for individual materials, Section 1 Unfilled aramid (Aromatic Polyamide) Papers, calendared Non-cellulosic papers for electrical purposes: Part 3 Requirements for individual materials, Section 2 Unfilled aramid (Aromatic Polyamide) Paper, uncalendered Ceramic and glass insulating materials for telecommunication and allied purposes: Part 1 General requirements and classification of ceramic and glass insulating materials Combined flexible materials for electrical insulation: Part 1 Definitions and general requirements Combined flexible materials for electrical insulation: Part 2 Methods of test Combined flexible materials for electrical insulation: Part 3 Specifications for individual materials Prepreg based on glass woven fabric for electrical applications Low voltage high current arc resistance test - Method of test Muscovite mica scrap for mica paper Methods of grading and visual classification of muscovite mica splittings Resin based reactive compounds used for electrical insulation: Part 1 Definitions and general requirements (first revision) Resin based reactive compounds used for electrical insulation: Part 2 Methods of test [first revision]
Oct 2006
107
Oct 2006
112
Oct 2005
113
Oct 2005
* IS 12747(Part 1):1989 | IEC 60626-1(1979) * IS 12747(Part 2):1989 | IEC 60626-2(1978) IS 12747(Part 3):1998 / IEC 60626-3(1996) IS 13066:1991 IS 13233:1991 IS 13335:1992 IS 13357:1992 IS 13465(Part 1):2005 / IEC 60455-1(1998) IS 13465(Part 2):2005 / IEC 60455-2(1998)
Oct 2005 Oct 2005 Nov 2008 Oct 2006 Oct 2006 Apr 2008 Apr 2008
122
123
Resin based reactive compounds used for electrical insulation - Part 3: Specification for individual materials - Section 1: Unfilled epoxy resinous compounds (first revision) Resin based reactive compounds used for electrical insulation - Part 3: Specification for individual materials - Section 2: Quartz filled epoxy resinous compounds [first revision) Resin based reactive compounds used for electrical insulation - Part 3: Specification for individual materials - Section 3: Unfilled polyurethane compounds [first revision) Resin based reactive compounds used for electrical insulation - Part 3: Specification for individual materials - Section 4: Filled polyurethane compounds (first revision) Solventless polymerisable compounds used for electrical insulation: Part 3 Specification for individual materials, Section 5 Epoxy phynol novolac resin Resin based reactive compounds used for electrical insulation - Part 3: Specification for individual materials - Section 6: Unsaturated polyester based impregnating resins Test procedure for measurement of loss of tangent angle of coils and bars for machine winding-guide Muscovite mica flakes and mica powder for industrial applications Guide for determining compatibility between enamelled winding wires and impregnating compounds Method of test for high voltage, low current dry arc resistance of solid electrical insulation Specification for unidirectional fibre glass tape Electrical insulating materials - Determination of the lonizing radiation: Part 1 Effects of radiation interaction and dosimetry Insulating mats for electrical purposes - Specification (Superseding IS: 5424) Feb 2008 Apr 2008 Oct 2006 Aug 2009 Sep 2007 Oct 2007 1 May 2008
124
125
126
127
128
135
FINALISED DRAFTS UNDER PRINT 1 2 DOC.ETD 2(6084) DOC.ETD 2(6085) Electrical Insulation Thermal Evaluation and designation (Second Revision of IS 1271) Specification for insulating materials based on mica Part 1 : Definitions and general requirements [First Revision of IS 9299(Part 1)] Specification for insulating materials based on mica Part 2 : Methods of test (Second Revision of IS 9299(Part 2)
** INDICATES STANDARDS TO BE REVISED | INDICATES EQUIVALENT STANDARDS 14
DOC.ETD 2(6086)
DOC.ETD 2(6087)
Electrical Insulating materials Determination of electrolytic corrosion caused by insulating materials Test methods (First Revision of IS 8516:1977) Electrical Insulating materials used under severe ambient conditions Test methods for evaluating resistance to tracking and erosion (First Revision of IS 9947:1981) Specification for insulating materials based on mica Part 3: Specification for individual materials Sheet 1: Commutator separators and materials (First Revision of IS 9299(Part 3/Sec 1) Insulating materials based on mica-Part 3: Specification for individual materials - Sheet 2: Mica paper [First Revision of IS 9299(Part 3/Sec 2)] Specification for insulating materials based on mica Part 3: Specification for individual materials Sheet 3 : Rigid mica materials for heating equipment (First Revision of IS 9299(Part 3/Sec 3) Specification for insulating materials based on mica Part 3: Specification for individual materials Sheet 4 Polyester film-backed mica Paper with a B-stage epoxy Resin binder (First Revision of IS 9299(Part 3/Sec 4) Specification for insulating materials based on mica Part 3: Specification for individual materials Sheet 5 : Glass-backed mica paper with an epoxy resin binder for post- Impregnation (VPI) (First Revision of IS 9299(Part 3/Sec 5) Specification for insulating materials based on mica Part 3: Specification for individual materials Sheet 6 : Glass-backed mica paper With a B-stage epoxy resin binder (First Revision of IS 9299(Part 3/Sec 6) Insulating materials based on mica Part 3 : Specification for individual materials Sheet 7 : Polyester film mica paper with an epoxy resin binder for single conductor taping (First Revision of IS 9299(Part 3/Sec 7) Insulating materials based on mica Part 3 : Specification for individual materials Sheet 8 : Mica paper tapes for flame-resistant security cables Insulating materials based on mica Part 3 : Specification for individual materials Sheet 9 : Moulding micanite
DOC.ETD 2(6088)
DOC.ETD 2(6089)
DOC.ETD 2(6090)
DOC.ETD 2(6091)
DOC.ETD 2(6092)
10
DOC.ETD 2(6093)
11
DOC.ETD 2(6094)
12
DOC.ETD 2(6095)
13
DOC.ETD 2(6096)
14
DOC.ETD 2(6097)
DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT 1 DOC.ETD 2(6176) Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria [First Revision of IS 8504(Part 2)]
DOC.ETD 2(6177)
Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics [First Revision of IS 8504(Part 4)] Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens Electrical insulating materials - Thermal endurance properties - Part 4-2: Ageing ovens - Precision ovens for use up to 300 C Electrical insulating materials - Thermal endurance properties - Part 4-3: Ageing ovens - Multi-chamber ovens Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material Electrical insulating materials - Thermal endurance properties - Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Ambient curing finishing varnishes [Second Revision of IS 10026(Pt 3/Sec. 1)] Electrical insulating materials Properties of thermal endurance Part 1: Ageing procedures and evaluation of test results [Second Revision of IS 8504(Part 1)](IEC 60216-1) Varnishes used for electrical insulation Part 1: Definition and general requirements [Second Revision of IS 10026(Part 1)] (IEC 60464-1) Varnishes used for electrical insulation Part 2: Methods of test [Second Revision of IS 10026(Part 2)] (IEC 60464-2) Varnishes used for electrical insulation Part 3: : Specifications for individual materials Sheet 2: Hot curing impregnating varnishes [Second Revision of IS 10026(Part 3/Sec 2)] (IEC 60464-3-2)
DOC.ETD 2(6178)
DOC.ETD 2(6179)
DOC.ETD 2(6180)
DOC.ETD 2(6181)
DOC.ETD 2(6182)
DOC.ETD 2(6183)
DOC.ETD 2(6185)
10
DOC.ETD 2(6186)
11
DOC.ETD 2(6187)
12
DOC.ETD 2(6188)
ETD 3 FLUIDS FOR ELECTROTECHNICAL APPLICATIONS SCOPE - To prepare product specifications, test methods as well as maintenance and use guides for liquid and gaseous dielectric. Also to prepare specifications and maintenance and use guides for lubricants and control fluids for turbines, generators and control systems as well as to assist in the preparations of test methods for such fluids
Sl. No. IS Number/ DOC Number Title Reaffirm Date Am
STANDARDS PUBLISHED 1 2 3 4 5 6 7 8 * IS 335:1993 IS 1866:2000 | IEC 60296(1982) IS 6103:1971 IS 6104:1971 IS 6262:1971 IS 6792:1992 | IEC 60156(1963) IS 6855:2003 IS 9434:1992 | IEC 60567(1977) IS 9960:1981 IS 10593:2006 / IEC 60599(1999) IS 11549:1986 IS 11697:1986 IS 12026(Part 1):1986 | IEC 60590(1977) IS 12026(Part 2):1986 New insulating oils (fourth revision) Code of practice for maintenance and supervision of mineral insulating oil in equipment (third revision) Method of test for specific resistance (resistivity) of electrical insulating liquids Method of test for interfacial tension of oil against water by the ring method Method of test for power factor and dielectric constant of electrical insulating liquids Method for determination of electric strength of insulating oils (first revision) Method of sampling for liquid dielectrics (first revision) Guide for sampling and analysis of free and dissolved gases and oil from oil-filled electrical equipment (first revision) Electrical grade castor oil for use as capacitor impregnant Mineral oil-impregnated electrical equipment in service - Guide to the interpretation of dissolved and free gases analysis (second revision) Impregnating oils and compounds for paper insulated cables upto 33 kV Guide for determination of lightning impulse electric strength of insulating liquids Guide for the determination of the aromatic hydrocarbon content of new insulating oils: Part 1 Absorption chromatographic method Guide for the determination of the aromatic hydrocarbon content of new insulating oils: Part 2 Infra red spectrophotometric method Methods of tests for oxidative ageing of electrical insulation of petroleum oils by the open beaker method Test method for oxidation stability of inhibited mineral insulating oils
** INDICATES STANDARDS TO BE REVISED | INDICATES EQUIVALENT STANDARDS 17
Mar 2010 Dec 2005 Oct 2006 Oct 2006 Oct 2006 Apr 2008 Oct 2008 Apr 2008
2 1 1 1
9 10
Oct 2006
11 12 13
14
Oct 2006
15 16
17 18
Inhibited mineral insulating oils Gassing of insulating liquid under electric stress and ionization: Part 1 Method of determination of gassing rate under hydrogen atmosphere Gassing of insulating liquids under electric stress and ionization: Part 2 Method of determination of gassing rate under nitrogen atmosphere Oxidation stability of inhibited mineral insulating oil by rotating bomb - Method of test Impregnants for power capacitors Sulphur hexafluoride for electrical purposes Method of test for carbon type analysis of mineral oils by infra-red spectrophotometry Methods for counting and sizing particles in insulating liquids General classification of insulating liquids Determination of water in insulating liquids and in oilimpregnated paper and pressboard by automatic coulometric Karl Fischer titration - Method of test Method of test for detection and determination of antioxidant additives in insulating oils Mineral insulating oils - Methods for the determination of 2-furfural and related compounds
19
IS 12475(Part 2):1988
Apr 2008
20 21 22 23 24 25 26
IS 12958:1990 IS 13067:1991 IS 13072:1991 / IEC 60376 (1971) * IS 13155:1991 IS 13236:1991 / IEC 60970(1989) IS 13503:1992 / IEC 61039(1990) IS 13567:1992
Oct 2006 Oct 2006 Oct 2006 Oct 2006 Oct 2006 Apr 2008 Apr 2008
27 28
Apr 2008
DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT 1 DOC.ETD 3(5658) Method of test for carbon type analysis of mineral oils by infra-red spectrophotometry (first revision of IS 13155)
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION 1 DOC.ETD 3(6251) Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear (fifth revision of IS 335)
ETD 6 ELECTRICAL INSULATORS AND ACCESSORIES SCOPE - To prepare standards regarding insulated bushing, insulators for overhead lines, insulators for sub-stations and jointing accessories which are integral parts of insulators
Sl. No. IS Number/ DOC Number Title Reaffirm Date Am
STANDARDS PUBLISHED 1 2 3 4 IS 283:1976 IS 731:1971 IS 1441:1989 IS 1445:1977 Porcelain insulators for telegraph and telephone lines (third revision) Porcelain insulators for overhead power lines with a nominal voltage greater than 1000 V (second revision) Insulator stalks for telegraph and telephone lines (second revision) Porcelain insulators for overhead power lines with a nominal voltage up to andincluding 1 000 V (second revision) Bushings for alternating voltages above 1 000 Volts (second revision) Metal fittings of insulators for overhead power lines with nominal voltage greater than 1000 V Specification : Part 1 General requirements and tests (first revision) Insulator fittings for overhead power lines with nominal voltage greater than1000 V - Specification : Part 2 Dimensional requirements (second revision) Specification for Insulator fittings for overhead power lines with a nominal voltage greter than 1 000 Volts: Part 3 Locking devices Specification for Insulator fittings for overhead power lines with a nominal voltage greater than1 000 V: Part 4 Test for locking devices Porcelain post insulators for systems with nominal voltage greater than 1000 Volts (first revision) Characteristics of string insulator units (first revision) Dimensions for porcelain transformer bushings for use in lightly polluted atmospheres: Part 1 Upto and including 1 kV, Section 1 Porcelain parts (first revision) Dimensions for porcelain transformer bushings for use in lightly polluted atmospheres: Part 1 Up to and including 1 kV, Section 2 Metal parts (first Revision) Dimensions for porcelain transformer bushings for use in lightly polluted atmospheres: Part 2 3.6 kV bushings, Section 1 Porcelain Parts (first revision)
** INDICATES STANDARDS TO BE REVISED | INDICATES EQUIVALENT STANDARDS 19
4 7
5 6
IS 2486(Part 2):1989 | IEC 120 (1984) IS 2486(Part 3):1974 | IEC 372-1 (1971) IS 2486(Part 4):1981 | IEC 372-2 (1976) IS 2544:1973 | IEC 168 (1964) IS 3188:1980 IS 3347(Part 1/Sec 1):1979
Apr 2009
Jul 2006
Jul 2006
10 11 12
13
Apr 2009
14
Apr 2009
15
Dimensions for porcelain transformer bushings for use in lightly polluted atmospheres: Part 2 3.6 kV bushings, Section 2 Metal parts (first revision) Dimensions for porcelain transformer bushings for use in lightly polluted atmospheres: Part 3 17.5 kV bushings, Section 1 Porcelain parts (second revision) Dimensions for porcelain transformer bushings for use in lightly polluted atmospheres: Part 3 17.5 kV bushings, Section 2 Metal parts (first revision) Dimensions for porcelain transformer bushings for use in lightly polluted atmospheres: Part 4 24 kV bushings, Section 1 Porcelain parts (Second revision) Dimensions for porcelain transformer bushings for use in lightly polluted atmospheres: Part 4 24 kV bushings, Section 2 Metal Parts (first revision Dimensions for porcelain transformer bushings for use in lightly polluted atmospheres: Part 5 36 kV bushings, Section 1 Porcelain parts (second revision) Dimensions for porcelain transformer bushings for use in lightly polluted atmospheres: Part 5 36 kV bushings, Section 2 Metal parts (first revision) Dimensions for procelain transformer bushings for use in lightly polluted atmospheres: Part 8 52 kV bushings, Section 1 Porcelain parts Dimensions for porcelain transformer bushings for use in lightly polluted atmospheres: Part 8 52 kV bushings: Section 2 Metal parts Dimensions for clamping arrangements for porcelain transformer bushings: Part 1 For 12 kV to 36 kV bushings (first revision) Dimensions for clamping arrangements for porcelain transformer bushings: Part 2 For 72.5 kV and 123 kV bushings Solid core porcelain insulators for overhead traction lines (first revision) Specification for porcelain guy strain insulators Dimensions of indoor and outdoor porcelain post insulator and post insulator units for system with nominal voltage greater than 1000 V: Part 1 Indoor post insulators Dimensions of indoor and outdoor porcelain post insulators and post insulator units for system with nominal voltage greater than 1000 V: Part 2 Outdoor cylindrical post insulators Dimensions of indoor and outdoor porcelain post insulators and post insulator units for system with nominal voltages greater than 1000 V: Part 3 Outdoor pedestal post insulators
** INDICATES STANDARDS TO BE REVISED | INDICATES EQUIVALENT STANDARDS 20
Apr 2009
16
Apr 2009
17
Apr 2009
18
Apr 2009
19
Apr 2009
20
Apr 2009
21
Apr 2009
22
Apr 2009
23
Apr 2009
24
IS 4257(Part 1):1981
Apr 2009
25
IS 4257(Part 2):1986
Apr 2009
26 27 28
29
** IS 5350(Part 2):1973
Apr 2009
30
Apr 2009
31 32 33 34 35 36 37
Hollow insulators for use in electrical equipment (first revision) Porcelain bushings for alternating voltage upto and including 1000 V (first revision) Silicone compound for application on high voltage porcelain insulators Insulator fittings for overhead power lines with a nominal voltage upto and including 1000 V Methods for radio interference test on high voltage insulators Methods for switching impulse tests on high voltage insulators Dimensions for procelain transformers bushings for use heavily polluted atmospheres 12/17.5kv, 24kv and 36 kv (First revision of IS 8603 (Part 1,2 & 3 combined) Dimensions for porcelain transformers bushings for use in heavily polluted atmospheres: Part 4 52 kV bushings Artificial pollution on high voltage insulators to be used on ac systems (first revision) Ceramic insulating materials for electrical purposes Indoor post insulators of organic material for systems with nominal voltages greater than 1 000 V upto and including 300 kV Code of practice for selection of disc insulator fittings for highest system voltages of 72.5 kV and above Dimensions for ceramic bushings for terminals Oil impregnated paper insulated condenser bushings Dimensions and requirements Guide for the selection of insulators in respect of pollution conditions Permissible limits of visual defects for insulating porcelains for electrical circuits Dimensions of porcelain oil filled transformer bushings (rated 52 kV) for medium polluted atmospheres Metal Connecting Lugs for Porcelain Transformer Bushings - Specification
Apr 2009 Apr 2009 Apr 2009 Jul 2006 Apr 2009 Apr 2009 Sep 2008
38
IS 8603(Part 4):2003
Oct 2008
39 40 41
42 43 44 45 46 47 48
Jul 2006 Jul 2006 Jul 2006 Apr 2008 Apr 2008 Apr 2008 Dec 2007
DRAFT STANDARDS FORMULATED 1 DOC.ETD 6(5834) Solid core porcelain insulators for overhead traction lines specification (second revision of IS 4318)
ETD 7 LOW VOLTAGE SWITCHGEAR & CONTROLGEAR SCOPE - To prepare standards for switchgear and controlgear such as circuit breakers, switches, contactors, starters, disconnectors, bus bars, fuse combination units and semiconductors connectors and any switchgear assemblies for voltages upto and including 1 000 V ac or 1 200 V dc
Sl. No. IS Number/ DOC Number Title Reaffirm Date Am
STANDARDS PUBLISHED 1 IS 1356(Part 1):1972 | IEC 60204-1 IS 2675:1983 IS 5039:1983 IS 8588(Part 1):1977 IS 8623(Part 1):1993 / IEC 60439-1(1985) Electrical equipment of machine tools: Part 1 Electrical equipment of machines for general use (second revision) Enclosed distribution fuseboards and cutouts for voltages not exceeding 1000 V (second revision) Distribution pillars for voltages not exceeding 1 000 volts (first revision) Thermostatic bimetals: Part 1 General requirements and methods of tests Specification for low voltage switchgear and controlgear assemblies: Part 1 Requirements for type-tested and partially type tested assemblies (first revision). Specification for low voltage switchgear and controlgear assemblies: Part 2 Particular requirements for busbar trunking systems (busways)-(first revision) Low-voltage switchgear and controlgear assemblies: Part 3 Particular requirements for equipment where unskilled persons have access for their use. Composite units of air-break switches and rewirable type fuses for voltages not exceeding 650 volt ac Specification (first revision) Specification for control transformers for switchgear and controlgear for voltages not exceeding 1000 Volt ac Residual current operated circuit-breakers for household and simililar uses : Part 1 circuit-breakers without integral overcurrent protection(RCCBs) (First Revision) Residual current operated circuit breakers for household and similar uses: Part 2 circuit breakers with integral overcurrent protection(RCBOs) (First Revision) Miniature circuit breaker boards for voltage upto and including 1 000 Volt ac Low voltage switchgear and controlgear : Part 5 Control circuit devices and switching elements Section 2 Proximity switches
** INDICATES STANDARDS TO BE REVISED | INDICATES EQUIVALENT STANDARDS 22
Mar 2006
2 3 4 5
Mar 2008
Mar 2008
Mar 2010
IS 12021:1987
Mar 2010
10
11
12 13
Mar 2006
14
Short-circuit current evaluation with special regard to rated short-circuit capacity of circuit-breakers in installations in ships Residual Current Operated Protective Devices (RCDs) for household and similar use Electromagnetic compatibility. Dimensions of Low-voltage swtichgear and controlgear - Standardized mounting on rails of mechanical support of electrical devices in switchgear and controlgear installations(Superseding IS 11039) Electrical Accessories - circuit breakers for over protection for household and similar installations Part 1 Circuit breakers for a.c. . operation ( Superseding IS 8828) Electrical Accessories - circuit breakers for over protection for household and similar installations Part 2 Circuit breakers for a.c. and d.c. operation Low voltage switchgear and controlgear: Part 1 General Rules (Superseding IS 13947(Part 1) (IEC 60947-1(2004)) Low voltage switchgear and controlgear: Part 2 Circuit breakers[Superseding IS 13947( Part 2 ):1993] Low voltage switchgear and controlgear : Part 3 Switches, disconnectors, switch-disconnectors and fuse combination units [Superseding IS 13947(Part 3)] Low-Voltage switchgear and controlgear: Part 4 Contactors and motor starters,Section 1 Electromechanical contactors and motor starters[superseding IS 13947(Part 4/Sec 1) Low voltage switchgear and controlgear: Part 4 Contactors and motors starters Section 2 ac Semiconductor Motor Controllers and Starters Low voltage switchgear and controlgear :Part 4 Contactors and motor starters Section 3 AC semiconductor controllers and contactors for nonmotor loads Low-voltage switchgear and controlgear: Part 5 Control circuit devices and switching elements, Section 1 Electromechanical control circuit devices (Sperseding of IS 13947 Part 5/Sec 1)
Jun 2008
15
Mar 2008
16
17
18
IS 60898(Part 2):2003 / IS/IEC 60898-2:2003 IS 60947(Part 1):2004 / IS/IEC 60947-1:2004 IS 60947(Part 2):2003 / IS/IEC 60947-2:2003 IS 60947(Part 3):1999 / IS/IEC 60947-3:1999
19
20 21
22
23
24
25
DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT 1 DOC.ETD 7(6079) Amendment 1 to IS/IEC 60947-4-3. Low voltage switchgear and controlgear :Part 4 Contactors and motor starters Section 3 AC semiconductor controllers and contactors for non-motor loads
DOC.ETD 7(6080)
Amendment 2 to IS/IEC 60947-2:2007 Low-Voltage switchgear and controlgear: Part 4 Contactors and Motor Starters,Section 2 AC Semiconductor Motor controllers and Starters Low voltage switchgear and controlgear: Part 2 Circuit breakers (IEC 60947-2:2006 (First Revision) Low-voltage switchgear and controlgear: Part 1 General rules (IEC 60947-1) (First Revision) Low voltage switchgear and controlgear : Part 5 Control circuit devices and switching elements Section 2 Proximity switches (60947-5-2:2007) (Superseding IS 13947-5-2:2000)
3 4 5
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION 1 DOC.ETD 7(5760) Specification for low voltage switchgear and controlgear assemblies: Part 1 Requirements for type-tested and partially type tested assemblies (second revision).(IEC 60439-1) Specification for low voltage switchgear and controlgear assemblies: Part 2 Particular requirements for busbar trunking systems (busways)-(second revision) (IEC 60439-2) Low-voltage switchgear and controlgear assemblies: Part 3 Particular requirements for equipment where unskilled persons have access for their use (first revision) (IEC 60439-3). Low Voltage Switchgear and controlgar. Part 3: Switches, dissconnectors, Switch-disconnectors and fuse combination units (Superseding IS 13947 (Part 3) (IEC 60947-3:2008) (ED 3.0) Low Voltage Switchgear and controlgar. Part 4: Contactors and motor starters, Section 1: Electromechanical contactors and motor starters (Superseding IS 13947 (Part 4/Sec 1)( IEC 60947-41:2009) (ED 3.0) Amendment No. 1 to IS/IEC 60947-5-1:2003Lowvoltage switchgear and controlgear: - Part 5 Control circuit devices and switching elements, Section 1 Electromechanical control circuit devices 2001 rror
DOC.ETD 7(5761)
DOC.ETD 7(5762)
DOC.ETD 7(6255)
DOC.ETD 7(6256)
2001 rror
DOC.ETD 7(6257)
2001 rror
ETD 8 HIGH VOLTAGE SWITCHGEAR AND CONTROLGEAR SCOPE - To prepare standards for switchgear and controlgear; such as circuit breakers, switches contactors, starters, disconnectors, busbars and any switchgear assemblies for voltages more than 1000 V ac
Sl. No. IS Number/ DOC Number Title Reaffirm Date Am
STANDARDS PUBLISHED 1 IS 3427:1997 / IEC 60298(1990) IS 5561:1970 IS 7567:1993 IS 8084:1976 IS 9046:1978 | IEC 60470(1974) IS 9135:1979 * IS 9920(Part 1):2002 / IEC 60265(1998) IS 9920(Part 2):2001 / IEC 60265-2(1988) * IS 9920(Part 3):1982 | IEC 60129(1975) * IS 9920(Part 4):1985 | IEC 60129(1975) * IS 9921(Part 1):1981 | IEC 60129(1975) * IS 9921(Part 2):1982 | IEC 60129(1975) * IS 9921(Part 3):1982 | IEC 60129(1975) * IS 9921(Part 4):1985 | IEC 60129(1975) A.C. Metal enclosed swtiichgear and controlgear for rated voltaes above 1kV upto and including 52 kV(first revsion) Electric power connectors Automatic circuit reclosers(second revision) Interconnecting busbars for ac voltage above 1 kV upto and including 36 kV AC contactors of voltage above 1000 V upto and including 11000 V Guide for testing of circuit breakers with respect to out-of-phase switching IS 9920 : Part 1 : 2002 High Voltage Switches - Part 1 : Switches for Rated Voltages Above 1 kV and Less Than 52 Kv High voltage switches : Part 2 High voltage switches for rated voltages of 52 kV and above (First revision) Switches and switch isolators for voltages above 1000 V: Part 3 Design and construction Switches and switch isolators for voltages above 1000 V: Part 4 Type tests and routine tests Alternating current disconnectors (isolators) and earthing switches for voltages above 1000 V: Part 1 General and definitions Alternating current disconnectors (isolators) and earthing switches for voltages above 1000 V: Part 2 Rating Alternating current disconnectors (isolators and earthing switches for voltages above 1 000 V: Part 3 Design and construction Alternating current disconnectors (isolators) and earthing switches for voltages above 1000 V: Part 4 Type tests and routine tests Sep 2007 1
2 3 4 5 6 7
Sep 2007 Sep 2007 Sep 2007 Sep 2007 Sep 2007 Sep 2007
8 9 10 11
12
Sep 2007
13
Sep 2007
14
Sep 2007
15
Alternating current disconnectors (isolators) and earthing switches for voltages above 1 000 V: Part 5 Informations to be given with tenders, inquiries and orders Dimensions of terminals of high voltage switchgear and controlgear High voltae motor-starter: Part 1 Direct-on-line (full voltage) ac starters Common specification for high voltage switchgear and controlgear standards (first revsion ) General requirements for circuit breakers for voltages above 1 000 V (Superseding all Parts and Sections of IS 2516) Methods of synthetic testing of high voltage alternating current circuit breakers Gas-insulated metal-enclosed switchgear for rated voltage 72.5 kV and above - requirements for switching of bus-charging current by disconnectors. High-voltage alternating current circuit-breakersGuide for short-circuit and switching test procedures for metal-enclosed and dead tank circuit-breakers A.C. insulation-enclosed switchgear and controlgear for rated voltage above 1 kV and upto and including 38 kV High voltage alternating current switch fuse combinations High voltage alternating current circuit breakersGuide for seismic qualifications of high-voltage alternating current circuit-breakers High voltage/ low voltage prefabricated substations High Voltage Alternating Current Contactors and Contactor-Based Motor-Starters (superceeding IS 9046:1978 and IS 12661(Part 1):1988 Gas insulated metal enclosed switchgear for rated voltages of 72.5 KV and above High-voltage swithgear and controlgear: Part 102 High-voltage alternating current circuit breakers High-voltage swithgear and controlgear: Part 105 Alternating current switch-fuse combinations High-voltage switchgear and controlgear: Part 200 AC Metal-Enclosed Switchgear and Controlgear for Rated Voltages Above 1 kV and Up To and Including 52 kV
Sep 2007
16 17 18 19
IS 10601:1983 IS 12661(Part 1):1988 IS 12729:2004 / IEC 60694 (1996) IS 13118:1991 / IEC 60056(1987) IS 13516:1993 / IEC 60427(1989) IS 14657:1998 / IEC 61259(1994) IS 14658:1999 / IEC 61633(1995) IS 14659:1999 / IEC 60466(1987) IS 14666:1999 / IEC 60420(1990) IS 14674:1999 / IEC 61166(1993) IS 14786:2000 / IEC 61330(1995) IS 60470:2000 / IS/IEC 60470:2000 IS 60517:1990 / IS/IEC 60517:1990 IS 62271(Part 102):2003 / ISIEC 62271-102:2003 IS 62271(Part 105):2002 / IS/IEC62271-105:2002 IS 62271(Part 200):2003 / IS/IEC62271-200:2003
20 21
22
Apr 2009
23
Apr 2009
24 25
26 27
Mar 2010
28 29
Sep 2007
30 31
32
High-voltage switchgear and controlgear: Part 201 AC Insulation Enclosed Switchgear and Controlgear for Rated Voltages Above 1 kV and Above 52 kV High-voltage swithgear and controlgear: Part 203 Gas-insulated metal-enlosed switchgear for rated voltages above 52 kV
33
FINALISED DRAFTS UNDER PRINT 1 DOC.ETD 8(6048) High-Voltage switchgear and controlgear: Part 207 Seismic qualification for gas-insulated switchgear assemblies for rated voltages above 52 kV (IEC 62271-207) rror
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION 1 2 DOC.ETD 8(6243) DOC.ETD 8(6244) High-Voltage switchgear and controlgear: Part 1 Common Specification (IEC 62271-1: 2007) High-Voltage switchgear and controlgear: Part 100 High Voltage Alternating Current Circuit Breakers (IEC 62271-100 : 2008) High-Voltage switchgear and controlgear: Part 109 Alternating Current Series Capacitor by pass Switches (IEC 62271-109 : 2008) rror rror
DOC.ETD 8(6245)
rror
ETD 9 POWER CABLES SCOPE - To prepare standards for electric cables and their accessories, without limitations of voltage, current or form of construction but excluding cables for telecommunications and electronic equipment and such other cables as fall within the scope of other committees
Sl. No. IS Number/ DOC Number Title Reaffirm Date Am
STANDARDS PUBLISHED 1 2 3 IS 692:1994 IS 694:1990 | IEC 60227-1to5(1979) IS 1255:1983 Paper insulated lead-sheathed cables for rated voltages upto and including 33 kV (third revision) PVC Insulated cables for working voltages upto and including 1100 V (Third revision) Code of practice for installation and maintenance of power cables upto and including 33 kV rating (second revision) PVC insulated (heavy duty) electric cables: Part 1 For working voltages upto and including 1 100 V (third revision) PVC insulated (heavy duty) electric cables:Part 2 For working voltages from 3.3kV upto and including 11 kV (Second revision) Cables for motor vehicles (second revision) Flexible cables for miners' cap lamps (first revision) Recommended current ratings for cables: Part 1 Paper insulated lead sheathed cables Recommended current ratings for cables: Part 2 PVC insulated and PVC sheathed heavy duty cables Recommended current ratings for cables: Part 3 Rubber insulated cables Recommended current ratings for cables: Part 5 PVC insulated light duty cables Flexible cables for lifts and other flexible connections: Part 1 Elastomer insulated cables (first revision) Flexible cables for lifts and other flexible connections:Part 2 PVC insulated cables Recommended short-circuit ratings of high voltage PVC cables PVC insulation and sheath of electric cables (first revision) Shot firing cables (for use other than in shafts) (first revision)
** INDICATES STANDARDS TO BE REVISED | INDICATES EQUIVALENT STANDARDS 28
2 4
IS 1554(Part 1):1988 | IEC 605021983) IS 1554(Part 2):1988 | IEC 60502(1983) IS 2465:1984 IS 2593:1984 IS 3961(Part 1):1967 IS 3961(Part 2):1967 IS 3961(Part 3):1968 IS 3961(Part 5):1968 IS 4289(Part 1):1984 | IEC 60245-5 IS 4289(Part 2):2000 | IEC 60227-6(1985) IS 5819:1970 IS 5831:1984 | IEC 60502(1983) IS 5950:1984
Feb 2010
Feb 2010
6 7 8 9 10 11 12 13 14 15 16
Nov 2006 Nov 2006 Nov 2006 Nov 2006 Nov 2006 Nov 2006 Nov 2006 Feb 2010 Nov 2006 Nov 2006 Nov 2006
1 1 1 2 1
17 18 19
IS 6380:1984 | IEC 60502(1983) IS 6554:1983 IS 7098(Part 1):1988 | IEC 60502(1983) IS 7098(Part 2):1985 | IEC 60502(1983) IS 7098(Part 3):1993
Elastomeric insulation and sheath of electric cables (first revison) Soldering ferrules of straight through joints (first revision) Cross-linked polyethylene insulated thermosplastic sheathed cables - Specification : Part 1 For working voltages upto and including 1 100 V (first revision) Crosslinked polyethylene insulated PVC sheathed cables: Part 2 For working voltages from 3.3 kV upto and including 33 kV (first revision) Crosslinked polyethylene insulated thermoplastic sheathed cables: Part 3 For working voltages from 66 kV upto and including 220 kV Conductors for insulated electric cables and flexible cords (first revision) Compression type tubular in-line connectors for aluminium conductors of insulated cables (first revision) Compression type tubular terminal ends for aluminium conductors of insulated cables (first revision) Performance requirements of compression joints of aluminium conductors in insulated cables Soldering and welding type terminal ends for conductors of insulated cables Moulds of cast resin based straight through joints for cables for voltages upto and including 1 100 V (first revision) Moulds suitable for cast resin based terminations for cables for voltages upto and including 1 100 V (first revision) Moulds suitable for cast resin-based joints for cables for voltages upto and including 1 100 V (first revision) Welding cables (first revision) Elastomer insulated cables:Part 1 For working voltages upto and including 1 100 V (first revision) [superseeding IS 434(Parts 1 and 2)] Specification for elastomer-insulated cables:Part 2 For working voltages from 3.3 kV upto and including 33 kV (first revision) (superseding IS:434(Parts 1 and 2) Drums for electric cables Inverted type cable end boxes for outdoor termination suitable for paper insulated cables : Part 1 Belted type, multi-core cables upto and including 11 kV grade
** INDICATES STANDARDS TO BE REVISED | INDICATES EQUIVALENT STANDARDS 29
1 1 3
20
Feb 2010
21
Dec 2008
22 23
24
IS 8309:1993
Dec 2008
25 26 27
1 2
28
IS 9553:1987
Aug 2007
29 30 31
32
IS 9968(Part 2):2002
Aug 2007
33 34
35
Fictitious calculation method for determination of dimensions of protective coverings of cables:Part 1 Elastomeric and thermoplastic insulated cables Fictitious calculation method for determination of dimensions of protective coverings of cables: Part 2 Paper insulated cables Cast iron joint boxes for tee and branch trouser joints suitable for paper insulated cables for voltages upto and including 11 kV Methods of test for cables: Part 0 General Methods of test for cables: Part 1 Annealing test for wires used in conductors Methods of test for cables: Part 2 Tensile test for aluminium wires Methods of test for cables: Part 3 Wrapping test for aluminium wires Methods of test for cables: Part 4 Persulphate test of conductor Methods of test for cables: Part 5 Conductor resistance test Methods of test for cables: Part 6 Thickness of thermoplastic and elastomeric insulation and sheath Methods of test for cables: Part 7 Tensile strength and elongation at break of thermoplastic and elastomeric insulation and sheath Methods of test for cables: Part 8 Breaking strength and elongation at break for impregnated paper insulation Methods of test for cables: Part 9 Tear resistance for paper insulation Methods of test for cables:Part 10 Loss of mass test Methods of test for cables:Part 11 Thermal ageing in air Methods of test for cables:Part 12 Shrinkage test Methods of test for cables:Part 13 Ozone resistance test Methods of test for cables:Part 14 Heat shock test
Nov 2006
36
Nov 2006
37
Nov 2006
38 39 40 41 42 43 44 45
IS 10810(Part 0):1984 IS 10810(Part 1):1984 IS 10810(Part 2):1984 IS 10810(Part 3):1984 IS 10810(Part 4):1984 IS 10810(Part 5):1984 IS 10810(Part 6):1984 IS 10810(Part 7):1984
Nov 2006 Nov 2006 Nov 2006 Nov 2006 Nov 2006 Nov 2006 Nov 2006 Nov 2006
46
IS 10810(Part 8):1984
Nov 2006
47 48 49 50 51 52 53
IS 10810(Part 9):1984 IS 10810(Part 10):1984 IS 10810(Part 11):1984 IS 10810(Part 12):1984 IS 10810(Part 13):1984 IS 10810(Part 14):1984 IS 10810(Part 15):1984
Nov 2006 Nov 2006 Nov 2006 Nov 2006 Nov 2006 Nov 2006
54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74
IS 10810(Part 16):1986 IS 10810(Part 17):1986 IS 10810(Part 19):1984 IS 10810(Part 20):1984 IS 10810(Part 21):1984 IS 10810(Part 22):1984 IS 10810(Part 23):1984 IS 10810(Part 24):1984 IS 10810(Part 25):1984 IS 10810(Part 26):1984 IS 10810(Part 27):1984 IS 10810(Part 28):1984 IS 10810(Part 29):1984 IS 10810(Part 30):1984 IS 10810(Part 31):1984 IS 10810(Part 32):1984 IS 10810(Part 33):1984 IS 10810(Part 34):1984 IS 10810(Part 35):1984 IS 10810(Part 36):1984 IS 10810(Part 37):1984
Methods of test for cables:Part 16 Accelerated ageing test by oxygen pressure method Methods of test for cables: Part 17 Tear resistance test for heavy duty sheath Methods of test for cables:Part 19 Bleeding and blooming test Methods of test for cables:Part 20 Cold bend test Methods of test for cables:Part 21 Cold impact test
Nov 2006 Nov 2006 Nov 2006 Nov 2006 Nov 2006
Methods of test for cables:Part 22 Vicat softening point Nov 2006 Methods of test for cables:Part 23 Melt-flow index Methods of test for cables:Part 24 Water soluble impurities test of insulating paper Methods of test for cables:Part 25 Conductivity of water extract test of insulating paper Methods of test for cables:Part 26 pH value of water extract test of insulating paper Methods of test for cables:Part 27 Ash content test of insulating paper Methods of test for cables:Part 28 Water absorption test (Electrical) Methods of test for cables:Part 29 Environmental stress cracking test Methods of test for cables:Part 30 Hot set test Methods of test for cables:Part 31 Oil resistance test Methods of test for cables:Part 32 Carbon content test for polyethylene Methods of test for cables:Part 33 Water absorption test (Gravimetric) Methods of test for cables:Part 34 Measurement of thickness of metallic sheath Methods of test for cables:Part 35 Determination of tin in lead alloy for sheathing Methods of test for cables:Part 36 Dimensions of armouring material Methods of test for cables:Part 37 Tensile strength and elongation at break of armouring materials
** INDICATES STANDARDS TO BE REVISED | INDICATES EQUIVALENT STANDARDS 31
Nov 2006 Nov 2006 Nov 2006 Nov 2006 Nov 2006 Nov 2006 Nov 2006 Nov 2006 Nov 2006 Nov 2006 Nov 2006 Nov 2006 Nov 2006 Nov 2006 Nov 2006 2
75 76 77 78 79
IS 10810(Part 38):1984 IS 10810(Part 39):1984 IS 10810(Part 40):1984 IS 10810(Part 41):1984 IS 10810(Part 42):1984
Methods of test for cables:Part 38 Torsion test on galvanized steel wires for armouring Methods of test for cables:Part 39 Winding test on galvanized steel strips for armouring Methods of test for cables:Part 40 Uniformity of zinc coating on steel armour Methods of test for cables:Part 41 Mass of zinc coating on steel armour Methods of test for cables:Part 42 Resistivity test of armour wires and strips and conductance test of armour (wires/strips)
Nov 2006 Nov 2006 Nov 2006 Nov 2006 Nov 2006 1 1
80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95
IS 10810(Part 43):1984 IS 10810(Part 44):1984 IS 10810(Part 45):1984 IS 10810(Part 46):1984 IS 10810(Part 47):1984 IS 10810(Part 48):1984 IS 10810(Part 49):1984 IS 10810(Part 50):1984 IS 10810(Part 51):1984 IS 10810(Part 52):1984 IS 10810(Part 53):1984 IS 10810(Part 54):1984 IS 10810(Part 55):1986 IS 10810(Part 56):1987 IS 10810(Part 57):1987 IS 10810(Part 58):1998
Methods of test for cables:Part 43 Insulation resistance Nov 2006 Methods of test for cables:Part 44 Spark test Methods of test for cables:Part 45 High voltage test Methods of test for cables:Part 46 Partial discharge test Methods of test for cables:Part 47 Impulse test Methods of test for cables:Part 48 Dielectric power factor test Methods of test for cables:Part 49 Heating cycle test Methods of test for cables:Part 50 Bending test Methods of test for cables:Part 51 Dripping test Methods of test for cables:Part 52 Drainage test Methods of test for cables:Part 53 Flammability test Methods of test for cables:Part 54 Static flexibility test Methods of test for cables:Part 55 Abrasion test Methods of test for cables: Part 56 Accelerated ageing by air-pressure method Methods of test for cables: Part 57 Flexing test Methods of test for cables: Part 58 Oxygen index test Nov 2006 Nov 2006 Nov 2006 May 2005 Nov 2006 Nov 2006 Nov 2006 Nov 2006 Nov 2006 Nov 2006 Nov 2006 Nov 2006 Aug 2007 Aug 2007 Dec 2008 1
96
IS 10810(Part 59):1988
Methods of test for cables: Part 59 Determination of the amount of halogen acid gas evolved during combustion of polymeric materials taken from cables Methods of test for cables: Part 60 Thermal stability of PVC insulation and sheath Methods of test for cables: Part 61 Flame retardant test Methods of test for cables: Part 62 Fire resistance test for bunched cables Methods of test for cables: Part 63 Smoke density of electric cables under fire conditions Methods of test for cables :Part 64 Measurement of temperature index Moulds suitable for cast resin based indoor terminations for cables for voltages 3.3 kV and above and upto and including 11 kV Moulds for cast resin based straight through joints for cables for working voltages from 3.3 kV upto and including 11 kV Power cables dimensions for moulds for cast resin based outdoor terminations for cables for voltages above 1 100 volts and upto and including 11 000 volts Brass glands for PVC cables Joints and terminations for polymeric cables for working voltages from 6.6 kV up to and including 33 kV - performance requirements and type tests Performance requirements and type test for transition joint of cables for working voltages from 11 kV up to and including 33 kV Aerial bunched cables for working voltages upto and including 1 100 volts- specification Elastomer insultated flexible cables for use in mines (superseeding IS:691 and IS:1026)
May 2005
IS 10810(Part 60):1988 IS 10810(Part 61):1988 IS 10810(Part 62):1993 IS 10810(Part 63):1993 IS 10810(Part 64):2003 IS 10877:1984
May 2005 May 2005 Dec 2008 Dec 2008 Mar 2008 Nov 2006 1
103
IS 11979:1987
Aug 2007
104
IS 12909:1990
Feb 2010
105 106
107
Dec 2008
108 109
IS 14255:1995 IS 14494:1998
FINALISED DRAFTS UNDER PRINT 1 DOC.ETD 9(5795) Specification for crosslinked polyethylene insulated thermoplastic sheathed cables: Part 2 For working voltages from 3.3 kV upto and including 33 kV (second revision) Polyvinyl chloride insulated sheathed and unsheathed cables with rigid and flexible conductor for rated voltages upto and including 450/750 V : Part 1 General requirements (fourth revision of IS 694) Specification for cable accessories for exturded power cable with rated voltage from 1.1 kV up to and including 3.3 kV (E) Part 1 Test requirements and test methods
** INDICATES STANDARDS TO BE REVISED | INDICATES EQUIVALENT STANDARDS 33
DOC.ETD 9(5866)
DOC.ETD 9(5976)
DOC.ETD 9(5977)
Specification for cable accessories for exturded power cable with rated voltage from 3.3 kV (UE) up to and including 33 kV (E) Part 2 Test requirements (First Revision of IS 13573) Specification for cable accessories for exturded power cable with rated voltage from 3.3 kV (UE) up to and including 33 kV (E) Part 3 Test methods (First Revision of IS 13573)
DOC.ETD 9(5978)
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION 1 DOC.ETD 9(5865) Halogen Free Flame Retardant Cables for Working Voltages up to and including 450/750 Volts Specification Elastomer insultated flexible cables for use in mines (first revision of IS 14494) Specification for elastomer insulated cables with limited circuit integrity when affected by fire. Specification for recommended short circuit ratings of electric cables with rated voltage from 1.1 kV to 220 kV
2 3 4
ETD 10 PRIMARY CELLS AND BATTERIES SCOPE - To prepare standards for cells and batteries particularly those relating to the specification, checking of their dimensions and characteristics and to provide guidance on matters of safety
Sl. No. IS Number/ DOC Number Title Reaffirm Date Am
STANDARDS PUBLISHED 1 IS 586:1976 Leclanche type dry batteries for telecommunications,signalling and general purposes (third revision) Flashlights (second revision) Schedule of terminals for leclanche type primary batteries (first revision) General requirements and methods of tests for dry cells and batteries (first revision) Carbon electrodes for dry cells and batteries Multipurpose dry batteries (First revision) Heavy duty dry batteries (first revision) Button cells - Silver oxide Alkaline manganese dioxide cells Dec 2005 3
2 3 4 5 6 7 8 9
IS 2083:1991 IS 2652:1976 * IS 6303:1984 | IEC 86-1(1972) IS 6648:1972 * IS 8144:1997 | IEC 86-2(1972) * IS 9128:1999 IS 11675:1986 | IEC 86-2(1982) IS 15063:2001 | IEC 86-2(1994)
Dec 2005 Dec 2005 Dec 2005 Dec 2005 Feb 2008 Mar 2009 Mar 2009 Aug 2006
2 2 6
1 2
DRAFT STANDARDS FORMULATED 1 2 DOC.ETD 10(5755) DOC.ETD 10(5756) Primary Batteries Part 1: General (first revision of IS 6303) Primary Batteries: Part 2 Physical and electrical specification (first revision of IS 8144 and 9128)
ETD 11 SECONDARY CELLS AND BATTERIES SCOPE - To prepare standards for all rechargeable cells and batteries (starter batteries, stationary batteries, traction batteries etc.)
Sl. No. IS Number/ DOC Number Title Reaffirm Date Am
STANDARDS PUBLISHED 1 2 3 IS 1145:1980 IS 1146:1981 * IS 1651:1991 Lead-acid storage batteries for motor cycles, autorickshaws and similar vehicles (second revision) Rubber and plastic containers for lead-acid storage batteries (second revision) Stationary cells and batteries, lead-acid type (with tubular positive plates) (third revision) (superseding IS:541) Stationary cells and batteries, lead-acid type with plante positive plates (third revision) (superseding IS:541) Miners cap lamp batteries (lead-acid type) (first revision) Lead-acid traction batteries (first revision) Synthetic separators for lead-acid batteries (first revision) Stationary batteries lead-acid type with pasted positive plates (second revision) Lead-acid batteries for train lighting and airconditioning services (first revision) Lead-acid storage batteries for motor vehicles (first revision) Lead-acid starter batteries for diesel locomotives and rail cars (first revision) Lead-acid batteries for electric locomotives and electrical multiple units (first revision) General requirements and methods of test for leadacid storage batteries (second revision) Lead-acid storage batteries for marine use Sealed nickel-cadmium button type rechargeable single cell Vented type nickel cadmium batteries Dec 2008 Dec 2008 Sep 2007 3 1
* IS 1652:1991
Sep 2007
5 6 7 8 9 10 11 12 13 14 15 16
IS 2512:1978 IS 5154:1980 | IEC 254(1967) IS 6071:1986 IS 6304:1992 IS 6848:1979 | IEC 77(1968) * IS 7372:1995 | IEC 95-1(1988) IS 7624:1990 | IEC 95-1(1980) IS 7660:1988 IS 8320:2000 IS 9814:1981 IS 10893:1984 IS 10918:1984 | IEC 623(1978)
Dec 2008 Dec 2008 Sep 2007 Sep 2007 Dec 2008 Sep 2007 Dec 2008 Dec 2008 Jul 2005 Dec 2008 Dec 2008 Dec 2008
3 2 2 1 3 3
17 18 19 20 21 22 23 24 25 26 27
IS 12013:1987 IS 13300:1992 IS 13315:1992 | IEC 623(1983) IS 13369:1992 IS 13514:1992 IS 13568:1992 IS 13595:1992 IS 14217:1994 IS 14218:1994 | IEC 285(1983) IS 14257:1995 | IEC 95-1(1988) IS 14782:2000
Lead-acid batteries for 110 volts train lighting system with monobloc containers Nickel -cadmium aircraft batteries (aerobatic and nonaerobatic) Nickel -cadmium batteries for electric locomotives Stationary lead - acid batteries (with tubular positive plates) in monobloc containers Lead-acid batteries for electric road vehicles Lead -acid light weight storage batteries for motor cycles and similar vehicles fitted with ac circuitry Silver-oxide-zinc batteries for aircraft Miner's cap lamp batteries (alkaline type) Sealed cylindrical type rechargeable nickel cadmium cells Lead-acid storage batteries for motor vehicles with light weight and high cranking performance Code of practice for maintenance and testing of large lead- acid batteries for generating systems and substations Stationary valve regulated lead acid batteries Specification Secondary Cells and Batteries Containing Alkaline or other Non-Acid Electrolytes Nickel-Cadmium Prismatic Secondary Single Cells with Partial Gas Recombination
Sep 2007 Sep 2007 Sep 2007 Sep 2007 Sep 2007 Sep 2007 Sep 2007 Dec 2008 Dec 2008 Dec 2008 May 2005 1 2 2 1
28 29
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION 1 DOC.ETD 11(6166) Stationary cells and batteries, lead-acid type (with tubular positive plates) - Specification (fourth revision of IS 1651) Stationary cells and batteries, lead-acid type with plante positive plates - Specification (fourth revision of IS 1652) Lead-acid traction batteries Part 1: General requirements and methods of test [IEC 60254-1(2005) Lead-acid traction batteries Part 2: Dimensions of cells and terminals and marking of polarity on cells [IEC 60254-2(2008) Secondary batteries for the propulsion of electric road vehicles - Part 1: Test parameters [IEC 619821(2006)]
DOC.ETD 11(6167)
3 4
DOC.ETD 11(6206)
DOC.ETD 11(6207)
Secondary batteries for the propulsion of electric road vehicles - Part 2: Dynamic discharge performance test and dynamic endurance test [IEC 61982-2(2002)] Secondary batteries for the propulsion of electric road vehicles Part 3: Performance and life testing (traffic compatible, urban use vehicles) [IEC 61982-3(2001)
DOC.ETD 11(6208)
DRAFT STANDARDS FORMULATED 1 2 DOC.ETD 11(6252) DOC.ETD 11(6253) Lead-acid storage batteries for motor vehicles Flooded type [Second Revision of IS 7372] Stationary lead acid storage batteries for motor vehicles Valve regulated type
ETD 12 MEASURING EQUIPEMENT FOR BASIC ELECTRICAL QUANTITIES SCOPE - To prepare standards for direct and indirect acting analogue and digital indicating and recording instruments and their accessories, also transducers having electrical inputs and outputs for measuring electrical quantities by any method on direct current and alternating current at distribution system frequencies and their harmonics To prepare standards for primary reference apparatus, operating on direct current and alternating current at distribution frequencies and their harmonics for the purpose of measurement, traceability and intercomparison
Sl. No. IS Number/ DOC Number Title Reaffirm Date Am
STANDARDS PUBLISHED 1 IS 1248(Part 1):2003 | IEC 600 51-1(1997) IS 1248(Part 2):2003 | IEC 600 51-2(1984) IS 1248(Part 3):2003 | IEC 600 51-3(1984) IS 1248(Part 4):2003 | IEC 600 51-4(1984) IS 1248(Part 5):2003 | IEC 600 51-5(1984) Direct acting indicating analogue electrical measuring instruments and their accessories: Part 1 General requirements (fourth revision) Direct acting indicating analogue electrical measuring instruments and their accessories: Part 2 Ammeters and voltmeters (third revision) Direct acting indicating analogue electrical measuring instruments and their accessories: Part 3 Wattmeters and varmeters (third revision) Direct acting indicating analogue electrical measuring instruments and their accessories: Part 4 Frequency meters (third revision) Direct acting indicating analogue electrical measuring instruments and their accessories: Part 5 Phase meters, power factor meters and synchroscope (third revision) Direct acting indicating analogue electrical measuring instruments and their accessories: Part 6 Ohmmeters (impedance meters) and conductance meters (third revision) Direct acting indicating analogue electrical measuring instruments and their accessories: Part 7 Multifunction instruments (third revision) Direct acting indicating analogue electrical measuring instruments and their accessories: Part 8 Accessories (third revision) Direct acting indicating analogue electrical measuring instruments and their accessories: Part 9 Test methods (third revision) Direct current potentiometers (second revision) Dimensions for panel mounted indicating and recording electrical instruments (first revision) dc moving coil galvanometers Sep 2008
Aug 2008
Dec 2008
Aug 2008
Aug 2008
Aug 2008
IS 1248(Part 7):2003 | IEC 600 51-7(1984) IS 1248(Part 8):2003 | IEC 600 51-8(1984) IS 1248(Part 9):2003 | IEC 600 51-9(1988) IS 1765:1980 | IEC 60523:1975 IS 2419:1979 | IEC 60473(74) IS 2442:1963
Aug 2008
Sep 2008
Dec 2008
10 11 12
13 14
IS 2992:1987 IS 3602:1966
Insulation resistance testers, hand operated (magneto generator type) (second revision) Recommendations for the design of scales and indexes for indicating instrumentsfor scales of 1 to 2 percent resolution Methods of test for resistance of metallic electrical resistance material Method of test for temperature co-efficient of precision resistor wires Direct recording electrical measuring instruments Vibration galvanometers Ballistic galvanometers Standard cells Plugs and keys for resistance boxes Tangent galvanometers Terminal markings for electrical measuring instruments and their accessories Recommendations for design of linear scales and indexes for indicating instruments to be read to 0.331.25 percent resolution. Electrical measuring instruments for explosive gas atmospheres (first revision) Specification for Rheostats Portable earth resistance meters (first revision) Safety requirements for indicating and recording electrical measuring instruments and their accessories: Part 1 Common safety requirements for instruments Safety requirements for indicating and recording electrical measuring instruments and their accessories: Part 2 Safety requirements for instruments using a mains supply Specification for Direct current bridges for measuring resistance (superseding IS:1565) Direct current standard resistors
15 16 17 18 19 20 21 22 23 24
IS 3635:1966 IS 3636:1966 IS 6236:1971 | IEC 60258(1968) IS 7889:1975 IS 7890:1975 IS 7914:1975 | IEC 60428(1973) IS 8143:1976 IS 8160:1976 IS 8197:1976 IS 8525:1977
Jan 2010 Jan 2010 Jan 2010 Jan 2010 Jan 2010 Jan 2010 Jan 2010 Jan 2010 Jan 2010 Aug 2007 1 3
25 26 27 28
29
Aug 2007
30 31
32 33 34 35 36 37
IS 11212:1985 IS 11287:1985 IS 11994:1986 IS 12312:1987 | IEC 60618 IS 14570:1998 / IEC 60688:1992 IS 14571:1998 / IEC 61028(1991)
Direct current resistive volt ratio boxes Bridge insulation testers (Magneto generator type) Portable insulation resistance tester (mains operated) Inductive voltage dividers Electrical measuring transducers for converting AC electrical quantities to to analogue or digital signals Electrical measuring Instruments X-Y recorders.
Aug 2007 Aug 2007 Aug 2007 Jan 2010 Aug 2007 Jul 2008
DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT 1 2 DOC.ETD 12(6141) DOC.ETD 12(6142) Panel mounted equipment - electrical measuring instrument - dimensions for panel mounting IEC 61554 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 1: General requirements IEC 61010-1 Elctrical measuring transducers for converting a.c. electrical quantities or analogue or digital signals IEC 60688 Electrical safety in low voltage distribution system up to 1000 V a.c. and 1500 V d.c. equipment for testing, measuring or monitorin or protective measurs - Part 1: Gnral requirments IEC 61557-1 Electrical safety in low voltage distribance systems UP to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring or protective measures Part 2 Insulation resistance IEC 61557-2 Direct acting recording electrical measuring instruments and their accessories IEC 258 Draft amendment No. 2 to Direct - Current Potentiometers IEC 60523: 1997 Draft amendment No.2 to DC bridges for measuring resistance IEC 60564:1997 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment dor testing, measuring or monitoring or protective measures - Part 5: Resistance to earth IEC 61557-5
DOC.ETD 12(6168)
DOC.ETD 12(6169)
DOC.ETD 12(6170)
6 7 8 9
ETD 13 EQUIPMENT FOR ELECTRICAL ENERGY MEASUREMENT TARIFF AND LOAD CONTROL SCOPE - To prepare standards for electrical energy measuring and electrical load control equipment (such as watthour meters, varhour meters, maximum demand indicators, telemetering for consumption and demand, equipment for remote meter reading, time-switches, equipment for the control of loads and tariffs and consumer services) including the electronic forms of these devices and their accessories
Sl. No. IS Number/ DOC Number Title Reaffirm Date Am
STANDARDS PUBLISHED 1 2 3 4 IS 1766:1998 | IEC 61038:1992 IS 7700:1975 IS 8530:1977 | IEC 60211(1966) IS 9792(Part 1):2005 Time swtiches for metering and load control (second revision) Quadrature phase-shifting voltage transformers Maximum demand indicators (class 1) Guide for testing, calibration and maintenance of ac electricity meters: Part 1Single phase whole current watthour meters, Class 2 (first revision) Alternating current precision electricity meters for testing purposes: Part 1 Requirements for electromechanical meters (first revision) Application guide for ac electricity meters(first revision) Testing equipment for ac electrical energy meters (first revision) AC watt-hour meters, Class 0.5, 1 and 2(first revision) AC static watthour meters (Class 1 and 2) (first revision) Volt-ampere hour meters for full power factor range [superseding IS:722(Part 7/Sections 1, 2 and 3)-1987] Jul 2005 Jul 2009 Sep 2007 Oct 2009 Sep 2009 2 4 Oct 2008 Sep 2005 Sep 2005 Jan 2010
IS 11426(Part 1):2006
6 7 8 9 10 11 12 13 14 15
IS 11448:2000 IS 12346:1999 | IEC 60736(1982) ** IS 13010:2002 | IEC 60521(1988) ** IS 13779:1999 | IEC 61036(1996) IS 14372:1996 IS 14415:1997 | IEC 60211(1996) IS 14451(Part 1):1998 | IEC 60338(1970) IS 14451(Part 2):1999 | IEC 60338(1970) ** IS 14697:1999 | IEC 60687(1992) IS 15707:2006
Volt-Amphere hour meters for restricted power factor Dec 2007 range - specification [superseding IS:722 (Part 5):1980 Telemetering of consumption and demand: Part 1 Impulse transmitting and receiving devices Telemetering for Consumption and Demands Part 2 Direct digital transfer of meter values ac static transformer operated watthour and var-hour meters, class 0.2S and .5S-Specification Testing, evaluation, installation and maintenance of ac electricity meters - Code of Practice Jan 2008 Jul 2009 Oct 2009 3
FINALISED DRAFTS UNDER PRINT 1 DOC.ETD 13(5878) Alternating current direct connected static prepayment meters for active energy (Class 1 & 2) Specification
DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT 1 DOC.ETD 13(5997) Electricity Metering Data exchangefor meter reading, tariff and load control- Part 21 direct local data exchange (IEC 62056-21:2002) Electricity metering Data exchange for meter reading tariff and load control -Part 42 Physical layer services and procedures for connection-oriented asynchronous data exchange. (IEC 62056-42:2002) Electricity Metering - Data Exchange for meter reading, tariff and load control - Companion Specification Electricity Metering - Data Exchange for meter reading, tariff and load control Part 47 COSEM transport layers for IPv4 networks Electricity metering-data exchange for meter reading, tariff and load control-Part 1 Terms relate to data exchange with metering equipment using DLMS/COSEMV (IEC 62051-1:2004)
DOC.ETD 13(5998)
DOC.ETD 13(6112)
DOC.ETD 13(6165)
DOC.etD 13(6229)
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION 1 DOC.ETD 13(6042) Electricity Metering Equipment (AC)- particular requirements - static meter for active energy classes (1&2) ( Second Revision of IS 13779) Electricity Mrtering Equipment (AC)- Particular Requirements - electromechanical Meters active Energy, Classes 0.5, 1 and 2 ( Second Revision of IS 13010) Electricity Metering Equipment (AC)- Particular Requirements :static Transformer operated MultiEnergy (classes 0.2S, 0.55 and 1.0S) ( First Revision of IS 14697) Electricity metering equipment ac - general requirements, tests and tests conditions Electricity metering Data exchange for meter reading tariff and load control -Part 46 Data link layer using HDLC protocol (IEC 62056-46:2007) Electricity metering Data exchange for meter reading tariff and load control -Part 53 COSEM application layer'(IEC 62056-53:2006) Electricity metering Data exchange for meter reading tariff and load control -Part 61 Object identification system (OBIS)" (IEC 62056-61:2006) Electricity metering Data exchange for meter reading tariff and load control -Part 62 Interface Classes' (IEC 62056-62:2006)
** INDICATES STANDARDS TO BE REVISED | INDICATES EQUIVALENT STANDARDS 43
DOC.ETD 13(6043)
DOC.ETD 13(6044)
4 5
DOC.ETD 13(6236)
DOC.ETD 13(6237)
DOC.ETD 13(6238)
DOC.ETD 13(5476)
Specification for alternating current precision meters for testing purposes: Part 2 Requirements for static meters
ETD 14 ELECTRICAL WIRING ACCESSORIES SCOPE - To prepare standards for electrical wiring accessories ; such as lamp holders, switches, plugs and socket- outlets, connecting devices and conduits and their accessories for electrical installations
Sl. No. IS Number/ DOC Number Title Reaffirm Date Am
STANDARDS PUBLISHED 1 2 3 IS 371:1999 IS 1258:2005 | IEC 61184(1997) IS 1293:2005 | IEC 60884-1 (2002) IS 2412:1975 IS 3010(Part 1):1965 Ceiling roses (third revision) Bayonet lamp holders (fourth revision) Plugs and socket outlets of rated voltage upto and including 250 volts and rated current upto and including 16 amperes - Specification (third revision) Link clips for electrical wiring (first revision) Appliance-connectors and appliance-inlets (nonreversible three-pin type): Part 1 Appliance connectors Appliance-connectors and appliance-inlets(nonreversible three-pin type): Part 2 Appliance inlets Bi-pin lampholders for tubular fluorescent lamps (first revision) Holders for starters for tubular fluorescent lamps (first revision) Fittings for rigid non-metallic conduits (second revision) Flexible steel conduits for electrical wiring Accessories for rigid steel conduits for electrical wiring (first revision) Switches for domestic and similar purposes (second revision) Interlocking switch socket outlets - Speification (first revision) Switch- socket outlets (non-interlocking type) Adaptors for flexible steel conduits Connectors (two-way) for railway coach wiring Nov 2005 May 2007 May 2007 1 7 May 2007 Apr 2009 Mar 2010 4 2 4
4 5
2 6
6 7 8 9 10 11 12 13 14 15 16
IS 3010(Part 2):1965 IS 3323:1980 | IEC 60400(1972) IS 3324:1982 | IEC 400(1972) IS 3419:1989 ** IS 3480:1966 IS 3837:1976 * IS 3854:1997 | IEC 60669-1(1998) IS 4160:2005 | IEC 60884-2-6 (1997) * IS 4615:1968 IS 4649:1968 IS 6896:1973
Apr 2009 Oct 2007 Jun 2008 May 2007 May 2007 May 2007 Jul 2007
5 1
1 1 5
17 18 19 20 21 22 23 24 25 26 27
IS 6965:1979 IS 8200:1976 * IS 9537(Part 1):1980 | IEC 60614-1(1978) ** IS 9537(Part 2):1981 ** IS 9537(Part 3):1983 | IEC 60614-2-2(1980) ** IS 9537(Part 4):1983 * IS 9537(Part 5):2000 | IEC 60614-2-3(1990) IS 9537(Part 6):2000 | IEC 60614-2-6(1992) IS 9537(Part 8):2003 IS 10276(Part 1):1982 | IEC 60238(1975) IS 10276(Part 2):1982 | IEC 60238(1975) IS 14763:2000 | IEC 60423(1993) IS 14768(Part 1):2000 | IEC 61035-1(1990) IS 14768(Part 2):2003 | IEC 61035-2-1(1993) IS 14772:2000 | IEC 60670-1(1989) IS 14927(Part 1):2001 | IEC 61084-1(1991) IS 14927(Part 2):2001 | IEC 61084-2-1(1996) IS 14930(Part 1):2001 | IEC 61386-1(1996) IS 14930(Part 2):2001 | IEC 61242-1(1995)
Switches for use in railway coaching stock (first revision) Toggle switches used in traction application Conduits for electrical installations: Part 1 General requirements Conduits for electrical installations:Part 2 Rigid steel conduits (superseding IS:1653) Conduits for electrical installations: Part 3 Rigid plain conduits of insulating materials (superseding IS:2509) Conduits for electrical installations: Part 4 Pliable selfrecovering conduits of insulating materials Conduits for a electrical installations: Part 5 Pliable conduits of insulating material (Superseding IS 6946) Conduit for electrical installations: Part 6 Pliable conduits of metal or composit materials Conduits for electrical instalations Part 8 Rigid non threadable conduits of aluminium alloy Edison screw lampholders : Part 1 Requirements and tests Edison screw lampholders : Part 2 Standard data sheets for lamp holders and gauges Conduit for electrical purposes, outside diameters of conduits for electrical installations and threads for conduits and fittings Conduit fittings for electrical installations :Part 1 General requirements Conduit fittings for electrical installations : Part 2 Metal conduit fittings (superseding IS 2667) Enclosures for accessories for household and similar fixed electrical installations (Superseding IS 5133(Part 1 and 2) Cable trunking and ducting systems for electrical installations :Part 1 General requirements Cable trunking and ducting systems for electrical installations: Part 2 Cable trunking and ducting systems instended for mounting on walls or ceilings Conduit systems for electrical installations : Part 1 General requirements Conduit systems for electrical installations : Part 2 Particular requirements for conduit system buried underground
May 2007 Jun 2008 Nov 2005 May 2007 May 2007 May 2007 Jun 2005 Mar 2010 Apr 2008 Jun 2008 Jun 2008
1 3 1
28
Mar 2010
29 30 31
32 33
34 35
1 1
36 37 38 39
IS 15368:2003 IS 15787:2008 | IEC 60884-2-3 (1989) IS 60309(Part 1):2002 / IEC 60309-1(1999) IS 60309(Part 2):2002 / IEC 60309-2(1999)
Cable reels for household and similar purposes Switch- socket outlets (Non-Interlock Type) Plugs, socket-outlets and couplers for industrial purposes: Part 1 General requirements (first revision) Plugs, socket-outlets and couplers for industrial purposes: Part 2 Dimensional interchangeability requirements for pin and contact-tube accessories (first revision) Appliance couplers for household and similar general purposes Part 1 General requirements Appliance couplers for household and similar general purposes part 2-2 Interconnection couplers for household and similar equipment Appliance couplers for household and similar general purposes- part 2-3 Appliance coupler with a degree of protection higher IPXO Switches for Appliances: Part 1 General Requirement (IEC 61058-1)
Jul 2008
40 41
IS 60320(Part 1):2001 / IEC 60320-1(2001) IS 60320(Part 2/Sec 2):1998 / IEC 60320-2-2(1998) IS 60320(Part 2/Sec 3):2007 | IEC 60320-2-3(1998) IS 61058(Part 1):2000 / IS/IEC 61058-1(2000)
42
Nov 2007
43
DRAFT STANDARDS APPROVED FOR WIDE CIRCULATION 1 DOC.ETD 14(6076) Conduits for electrical installations specification: Part 1 General requirements [first revision of IS 9537(Part )] (IEC 60614-1:1994) Specification for conduits for electrical installations: Part 2 Particular specifications for conduits, Sec 3 Pliable conduits of insulating material [first revision of IS 9537(Part 5)](IEC 60614-2-3) Conduit fittings for electrical installations :Part 3 conduit fittings of insulating material ( superseding IS 3419) (IEC 61035-2-2) Conduit fittings of electrical installations :Part 4 fittings for flexible conduits of metal, insulating or composite material and for pliable conduits of metal or composite material (IEC 61035-2-3) Plugs and socket-outlets for household and similar purposes: Part 2 Particular requirements for adoptors
DOC.ETD 14(6077)
DOC.ETD 14(5546)
DOC.ETD 14(5547)
DOC.ETD 14(5548)
DRAFT STANDARDS FORMULATED 1 DOC.ETD 14(5497) Switchs for domestic and similar purposes (third revision of IS 3854)
ETD 15 ROTATING MACHINERY SCOPE - To prepare standards on rotating electrical machines like induction, synchronous, motors, generators, dc machines and turbines including carbon brushes for electrical machines (with the exception of traction machines and rotating machinery coming under the purview of other Committees)
Sl. No. IS Number/ DOC Number Title Reaffirm Date Am
STANDARDS PUBLISHED 1 2 3 4 5 6 IS 325:1996 | IEC 60034-1(1983) IS 900:1992 IS 996:2009 IS 1231:1974 | IEC 60072 (1971) IS 2223:1983 | IEC 60072 (1971) IS 2253:1974 | IEC 34-7(1972) IS 2254:1985 IS 2968:1964 IS 2972(Part 1):1979 IS 2972(Part 2):1979 IS 2972(Part 3):1979 IS 3682:1966 * IS 4029:1967 IS 4665(Part 1):1984 IS 4665(Part 2):1984 IS 4691:1985 Three-phase induction motors(first revision) Code of practice for installation and maintenance of induction motors (Second revision) Specification for single phase ac induction motors for general purpose (third revision) Dimensions of three-phase foot-mounted induction motors (third revision) Dimensions of flange mounted ac induction motors (first revision) Designation for types of construction and mounting arrangement of rotating electrical machines (first revision) Dimensions of vertical shaft motors for pumps (second revision) Dimensions of slide rails for electric motors Textile motors: Part 1 Loom motors (first revision) Textile motors: Part 2 Card motors (first revision) Textile motors: Part 3 Spinning frame motors (first revision) Flameproof ac motors for use in mines Guide for testing three-phase induction motors Portable electric motor-operated tools: Part 1 General requirements and tests (first revision) Portable electric motor-operated tools:Part 2 Specific requirements for tools Degrees of protection provided by enclosure for rotating electrical machines (first revision) Feb 2008 Jan 2007 Jan 2007 4 2 Jan 2007 Feb 2008 2
7 8 9 10 11 12 13 14 15 16
Jan 2007 Jan 2007 Jan 2007 Jan 2007 Jan 2007 Jan 2007 Jan 2007 Jan 2007 Jan 2007 Mar 2009 1 3 1 1 2 1
17 18 19 20 21 22 23 24 25
IS 4722:2001 | IEC 60034-03 IS 4728:1975 IS 4758:1968 IS 4889:1968 | IEC 2 D IS 5422:1996 | IEC 60034-3(1988) IS 6362:1995 / IEC 60034-6:1991 IS 7132:1973 | IEC 60034-1(1969) IS 7306:1974 | IEC 60034-4(1967) IS 7538:1996
Rotating electrical machines (second revision) Terminal marking and direction of rotation for rotating electrical machinery (first revision) Method of measurement of noise emitted by machines Method of determination of efficiency of rotating electrical machines Turbine type generators (first revision) Designation of methods of cooling of rotating electrical machines (first revision) Guide for testing synchronous machines Methods for determining synchronous machine quantities from tests Three-phase squirrel cage induction motors for centrifugal pumps for agricultural applications (first revision) Guide for testing single-phase ac and universal motors Guide for testing insulation resistance of rotating machines Single-speed three-phase induction motors for driving lifts Dimensions and output series for rotating electrical machines (first revision) Values of performance characteristics for three-phase induction motors (first revision) Motors for submersible pump sets (first revision) Guide for testing of direct current (dc) machines Single-phase electric motors for definite purposes: Part 1 Domestic laundry machine motors Three-phase induction motors with type of protection 'n' Direct current micro motors for cassette tape recorders and other applications Guide for selection and use of carbon brushes for applications in rotating electrical machines(first revision)
Sep 2006 Jan 2007 Jan 2007 Jan 2007 Jan 2007 Jan 2007 Jan 2007 Jan 2007 Jan 2007 2 2
26 27 28 29 30 31 32 33 34 35 36
IS 7572:1974 IS 7816:1975 IS 8151:1976 IS 8223:1999 | IEC 60072-2(1990) IS 8789:1996 * IS 9283:1995 IS 9320:1979 IS 9582(Part 1):1980 IS 9628:1980 IS 9670:1980 IS 9919:1999
Jan 2007 Jan 2007 Jan 2007 Apr 2009 Jan 2007 Jan 2007 Jan 2007 Mar 2009 Mar 2009 Mar 2009 Feb 2008 1 3 1 1 2 2
37 38 39 40 41
Method of measurement of airborne noise emitted by gas turbine installations Centrifugal switch for single phase induction motors Permissible limits of noise level for rotating electrical machines Three-phase induction motors for machine tools Mechanical vibration of rotating electrical machines with shaft heights 56 mm and higher-measurement, evaluation and limits of vibration severity (first revision) Energy efficient induction motors -- three phase squirrel cage (first revision) Brush-holders for slip rings group R-Type RA Temperature rise measurement of rotating electrical machines Type of duty and classes of rating assigned to rotating electrical machines Method of measurement of airborne noise emitted by rotating electrical machinery: Part 1 Engineering method for free field conditions over a reflecting plane (Superseding IS 6098) Method of measurement of airborne noise emitted by rotating machinery: Part 2 Survey method (Superseding IS 6098) Stepping Motors Guide for measurement of winding resistance of an ac machine during operation at alternating voltage Specification for ac generators driven by reciprocating internal combustion engine: Part 1 Rated up to 20 kVA Specification for ac generators driven by reciprocating internal combustion engine: Part 2 Rated above 20 kVA and upto 1250 kVA Specification for brushes for electrical machines [superseding IS:3003 (Parts 3 and 4)-1977] Flexible conductors for carbon brushes Guide on effects of unbalanced voltages on the performance of three-phase cage induction motors
42 43 44 45 46
IS 12615:2004 | IEC 60034,60038,50 IS 12642:1989 | IEC 60778 IS 12802:1989 | IEC 60034-1(1983) IS 12824:1989 | IEC 60034-1(1983) IS 12998(Part 1):1991 / ISO 1680-1:1986
Nov 2009 Mar 2009 Mar 2009 Mar 2009 Feb 2008
47
IS 12998(Part 2):1991 / ISO 1680-2:1986 IS 13079:1991 IS 13107:1991 / IEC 60279(1969) IS 13364(Part 1):1992 | IEC 60034-1 IS 13364(Part 2):1992 | IEC 60341(1983) IS 13466:1992 | IEC 60136, 467, 773 IS 13525:1992 IS 13529:1992 | IEC 600892(1987)
Feb 2008
48 49 50
51
Feb 2008
52 53 54
55
IS 13555:1993
Guide for selection and application of three-phase ac induction motors for different types of driven equipment Specification for brush materials for electrical machinery [Superseding IS 3003(Part 2):1977] Definitions and nomenclature for carbon brushes, brush holders, commutators and slip rings for rotating electrical machinery (superseding IS:3003(Part 1)1977) Statistical method of determining and verifying standard noise emission values of machinery and equipment: Part 1 General conditions and definitions Statistical method of determining and verifying standard noise emission values of machinery and equipment: Part 2 Methods of stated values for individual machines Statistical method of determining and verifying standard noise emission values of machinery and equipment: Part 3 Simple (transition) method for stated values for batches of machines Statistical method of determining and verifying standard noise emission values of machinery and equipment: Part 4 Methods for stated values for batches of machines Brush-holders for electrical machines guide to the measurement of the static thrust applied to brush Definitions and terminology of brush-holders for electrical machines Code for model acceptance tests of hydraulic turbines Rules for steam turbines thermal acceptance tests Part 1 Method A - High accuracy for large condensing steam turbines Rules for steam turbines thermal acceptance tests Part 2 Method B - Wide range of accuracy for various types and sizes of turbines Steam turbines Part 1 Specification Impulse withstand levels of rotating ac machines with form wound stator coils Brush holders for electrical machines Specification for Three-phase Induction Motors for Fans Used in Air-conditioning and Ventilation Dimensions and output series for rotating electrical machines Part 2 Frame numbers 355 to 1000 and flange numbers 1180 to 2360
** INDICATES STANDARDS TO BE REVISED | INDICATES EQUIVALENT STANDARDS 51
Mar 2009
56 57
58
Jan 2007
59
Jan 2007
60
Jan 2007
61
Jan 2007
62 63 64 65
IS 14195:1994 / IEC 61015(1990) IS 14196:1994 / IEC 60560(1977) IS 14197:1994 / IEC 60193:1965 IS 14198(Part 1):1994 / IEC 60953-1:1990 IS 14198(Part 2):1994 / IEC 60953-2:1990 IS 14205(Part 1):1994 / IEC 60045-1:1991 IS 14222:1995 / IEC 60034-15:1990 IS 14376:1996 | IEC 136(1986) IS 14377:1996 IS 14568(Part 2):1998 / IEC 60072-2(1990)
66
Jan 2007
67 68 69 70 71
Jan 2007 Jan 2007 Jan 2007 Jan 2007 Jul 2008
72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91
IS 14569:1999 IS 14578:1999 IS 14582:1998 IS 14889:2000 IS 15429:2004 IS 15664:2006 / ISO 2314(1989) IS 15665:2006 / ISO 11086(1996) IS 15666(Part 1):2006 / ISO 3977-1(1997) IS 15666(Part 2):2006 / ISO 3977-2(1997) IS 15666(Part 3):2006 / ISO 3977-3(2004) IS 15666(Part 4):2006 / ISO 3977-4(2002) IS 15666(Part 5):2006 / ISO 3977-5(2001) IS 15666(Part 7):2006 / ISO 3977-5(2002) IS 15666(Part 8):2006 / ISO 3977-8(2002) IS 15666(Part 9):2006 / ISO 3977-9(1999) IS 15667:2006 / ISO 19860(2005) IS 15880:2009 IS 15881:2009 IS 60034(Part 1):2004 / IEC 60034-1(2004) IS 60034(Part 5):2000 / IEC 60034-5(2000)
Commutators for electrical machines Three-phase induction motors for use in nuclear power plants Single-phase small a.c. electric motors for centrifugal pumps for agricultural applications Copper tamping powder for carbon brushes Storage, installation and maintenance of DC motors Code of practice Gas turbines - Acceptance tests Gas turbines - Vocabulary Gas turbines - Procurement - Part 1: General introduction and definitions Gas turbines - Procurement - Part 2: Standard reference conditions and ratings Gas turbines - Procurement - Part 3: Design requirements Gas turbines - Procurement - Part 4: Fuels and environment Gas turbines - Procurement - Part 5: Applications for petroleum and natural gas industries Gas turbines - Procurement - Part 7: Technical information Gas turbines - Procurement - Part 8: Inspection, testing, installation and commissioning Gas turbines - Procurement - Part 9: Reliability, availability, maintainability and safety Gas turbines - Data acquisition and trend monitoring system requirements for gas turbine installations Three phase cage induction motors when fed from IGBT converters - Application Guide Three phase cage induction motors specifically designed for IGBT converter supply Rotating electrical machines - Part 1 Rating and performance Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification (Superseding IS 4691)
Feb 2009 Mar 2009 Mar 2008 Dec 2005 Jun 2009 1
92
Rotating electrical machines - Part 8: Terminal markings and direction of rotation (Superseding IS 4728) Field acceptance tests to determine the hydraulic performance of turbines, storage pumps and pump turbines Jun 2005
93
FINALISED DRAFTS UNDER PRINT 1 DOC.ETD 15(5306) Guide for testing three phase induction motors (revision of IS 4029)
DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT 1 2 DOC.ETD 15(5941) DOC.ETD 15(5942) Motors for Submersible Pumpsets - Specification (second revision of IS 9283) Type of duty and classes of rating assigned to rotating electrical machiens (first revision of IS 12824)
DRAFT STANDARDS FORMULATED 1 DOC.ETD 15(6115) Rotating electrical machines Part 2-2 Specific methods for determining separate losses of lare machines from tests supplementering Part 2-1
ETD 16 TRANSFORMERS SCOPE - To prepare standards on power and distribution transformers, reactors, onload tap changers, etc, without limitation on voltage or power. Transformer accessories and voltage stablizers, testing transformers and furnace transformers are included. (Instrument transformers, welding transformers and traction transformers are excluded)
Sl. No. IS Number/ DOC Number Title Reaffirm Date Am
STANDARDS PUBLISHED 1 * IS 1180(Part 1):1989 Outdoor type three-phase distribution transformers upto and including 100 kVA 11 kV:Part 1 Non-sealed type (third revision) Outdoor type three-phase distribution transformers upto and including 100 kVA 11 kV:Part 2 Sealed type (first revision) Power transformers: Part 1 General (first revision) Power transformers: Part 2 Temperature-rise Power transformers: Part 3 Insulation level and dielectric tests (Second revision) Power transformers: Part 4 Terminal marking,tappings and connections (first revision) Power Transformer: Part 5 Transformer/Reactor bushings minimum external clearance in air Specification Power Transformers - Part 10 Determination of sound levels Power Transformers - Part 8 Application guide Non-flameproof mining transformers for use below ground (first revision) Earthing transformers (first revision) Fittings and accessories for power transformers Continuously variable voltage auto transformers Reactors: Part 1 General (first revision) Reactors: Part 2 Shunt reactors (first revision) Jul 2006 Jul 2006 Jul 2006 Jul 2006 Jul 2008 Jul 2008 2 Jul 2008 1
* IS 1180(Part 2):1989
Jul 2008
3 4 5 6 7
* IS 2026(Part 1):1977 | IEC 60076(1977) * IS 2026(Part 2):1977 | IEC 60076(1977) * IS 2026(Part 3):1981 | IEC 60076(1977) IS 2026(Part 4):1977 | IEC 60076(1977) * IS 2026(Part 5):1994 | IEC 60076-3-1(1987) IS 2026(Part 10):2009 / IEC 60076-10(2001) IS 2026(Part 8):2009 / IEC 60076-8(1997) IS 2772:1982 IS 3151:1982 | IEC 60289(1968) IS 3639:1966 IS 5142:1969 IS 5553(Part 1):1989 | IEC 60289(1988) IS 5553(Part 2):1990 | IEC 60 289(1988)
Jul 2006 Jul 2006 Jul 2006 Jul 2006 Nov 2009
3 2 1 2
8 9 10 11 12 13 14 15
16 17 18 19 20 21 22 23 24 25 26 27
IS 5553(Part 3):1990 | IEC 60289(1988) IS 5553(Part 4):1989 | IEC 60289(1988) IS 5553(Part 5):1990 | IEC 60289(1988) IS 5553(Part 6):1991 | IEC 60289(1988) IS 5553(Part 7):1990 | IEC 60289(1988) IS 5553(Part 8):1990 | IEC 60289(1988) IS 6600:1972 IS 8447:1989 IS 8448:1989 IS 8468:1977 IS 8478:1977 IS 9147:1979
Reactors: Part 3 Current limiting reactors and neutral earthing reactors (first revision) Reactors: Part 4 Damping reactors (first revision) Reactors: Part 5 Tuning reactors (first revision) Reactors: Part 6 Earthing transformers (Neutral couplers) (first revision)
Reactors: Part 7 Arc supression reactors (first revision) Nov 2009 Reactors: Part 8 Smoothing reactors (first revision) Guide for loading of oil immersed transformers Manually operated voltage regulators for domestic use (first revision) Automatic line voltage correctors (step type for domestic use) (first revision) On-load tap changers Application guide for on-load tap changers Cable sealing boxes for oil immersed transformers suitable for paper insulated lead sheathed cables for highest system voltages from 12 kV upto and including 36 kV Servo-motor operated automatic line voltage correctors: Part 1 Correctors for single phase applications (second revision) Code of practice for selection, installation and maintenance of transformers: Part 1 Selection Code of practice for selection, installation and maintenance of transformers; Part 2 Installation (superseding IS:1886) Code of practice for selection, installation and maintenance of transformers: Part 3 Maintenance (superseding IS:1886) Moving coil voltage regulators Application guide for power transformers Dry type power transformers Nov 2009 Jul 2006 Jul 2008 Jul 2008 Jul 2006 Jul 2006 Jul 2006 1 2 1
28
IS 9815(Part 1):1994
Nov 2009
29 30
31
IS 10028(Part 3):1981
Jul 2008
32 33 34
35 36 37 38 39 40
IS 11333:1985 IS 12977:1990 IS 13956:1994 IS 13964:1994 | IEC 551 (1976) IS 61558(Part 1):1997 / IEC 61558-1(1997) IS 61558(Part 2/Sec 6):1997 / IEC 61558-2-6(1997)
Flameproof dry type transformers for use in mines Arc furnance transformers Testing transformers Methods of measurement of transformer and reactor sound levels Safety of power Transformer,power supply units and similar: Part 1 General requirement and test Safety of power Transformers, power supply units and similar: Part 2 particular requirements, Section 6 Safety Isolating transformers for general use
FINALISED DRAFTS UNDER PRINT 1 2 DOC.ETD 16(5991) DOC.ETD 16(6009) Power Transformers - Part 7 Loading guide for oil immersed power transformers Power Transformers - Part 3 Insulaiton levels, dielectric tests and external clearances in air (third revision of IS 2026(Part 3) Power Transformers - Part 1 General (first revision of IS 2026(Part 1) Power Transformers - Part 2 Temperature rise (first revision of IS 2026(Part 2) Power Transformers - Part 5 Ability to withstand short circuit (first revision of IS 2026(Part 5) safety of power Transformers, power supply units and similar part 2-7: Particulars requirements for transformers for toys {IEC 61558-2-7(2007)}
3 4 5 6
DRAFT STANDARDS APPROVED FOR WIDE CIRCULATION 1 DOC.ETD 16(6117) Outdoor type three-phase distribution transformers up to and including 100 KVA, 33 KV Part 1 Non-seald type [Fourth Revision of IS 1180(Part 1)] Outdoor type three-phase distribution transformers up to and including 200 KVA, 33 KV Part 2: Seald type [Second Revision of IS 1180(Part 2 )]
DOC.ETD 16(6118)
ETD 17 INDUSTRICAL ELECTROHEATING EQUIPMENT SCOPE - To prepare standards on dimensions, methods of tests, characteristics and safety requirements for industrial electrical heating installations and their components
Sl. No. IS Number/ DOC Number Title Reaffirm Date Am
STANDARDS PUBLISHED 1 2 3 4 IS 8992:1978 | IEC 60396(1972) IS 9021:1978 | iec 60398(1972) IS 9029:1978 | IEC 60397(1972) ** IS 9050:1979 | IEC 60239(1967) IS 9080(Part 1):1979 ** IS 9080(Part 2/Sec 1):1979 | IEC 60519-2(1975) Test methods for induction furnaces with submerged channels General test conditions for industrial electro-heating equipment Methods of tests for batch furnaces with metallic heating resistors Nominal dimensions of cylindrical machines graphite electrodes with threaded sockets and connecting pins for use in electric arc furnaces. Safety requirements in electro-heat installations: Part 1 General requirements Safety requirements in electro-heat installations: Part 2 Particular requirements for resistance heating equipment, Section 1 Protection in direct resistance heating installations Safety requirements in electro-heat installations: Part 2 Particular requirements for resistance heating equipment , Section 2 Protection in indirect resistance heating installations Safety requirements in electro-heat installations: Part 2 Particular requirements for resistance heating equipment, Section 3 Protection in potassium and sodiumnitrate and nitrite bath furnaces Safety requirements in electro-heat installations: Part 2 Particular requirements for resistance heating equipment, Section 4 Protection in installations used for drying varnishes and other similar products Safety requirements in electro-heat installations: Part 4 Particular requirements for arc furnace installations. General requirements for electric infra-red emitters for heating purposes. Methods of tests for crucible induction furnaces Mar 2006 Mar 2006 Mar 2006 Mar 2006 1
5 6
Mar 2006
Mar 2006
Mar 2006
10
** IS 9080(Part 4):1981 | IEC 60519-4(1977) IS 10098:1982 | IEC 60240(1967) ** IS 10122:1982 | IEC 60545(1979)
Mar 2006
11 12
13 14 15 16 17 18
** IS 10215:1982 | IEC 60683(1980) IS 11692:1986 | IEC 27(CO)60 IS 11712:1986 | IEC 27(CO)1959 IS 12188:1987 IS 13263:1992 | IEC 60680(1980) * IS 60519(Part 1):1984 / IEC 60519-1:1984 IS 60519(Part 3):1988 / IEC 60519-3:1988
Methods of tests for submerged arc furnaces Method of tests for electro-slag emelting furnaces Safety requirements for electro-slag remelting furnaces. Electric direct-arc melting furnaces Methods of test for plasma equipment for electroheat installations. Safety in electro-heat installations: Part 1General requirements [Superseding IS 9080 ( Part 1)]. Safety in electroheat installations: Part 3 Particular requirements for induction and conduction heating and induction melting installations [Superseding IS 9080 (Part 3 )]. Safety in electroheat installation : Part 5 Plasma installations Safety in electroheat installations: Part 9 Particular requirements for high frequency dielectric heating installations High frequency dielectric heating installations -Test methods for the determination of power output.
Mar 2006 Feb 2003 Feb 2003 Feb 2003 Sep 2003 Nov 2005
19
Nov 2005
20 21
IS 60519(Part 5):1980 / IEC 60519-5:1980 * IS 60519(Part 9):1987 / IEC 60519-9:1980 IS 61308:1994 / IEC 61308:1994
22
Nov 2005
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION 1 2 DOC.ETD 17(5614) DOC.ETD 17(5615) Safety in electroheat installations: Part 2 Particular requirements for resistance [IEC 60519-2(1992)] Safety in electroheat installations: Part 4 Particular requirements for arc furnace installations [IEC 605194(2000)] Safety in electroheat installations: Part 11 Particular requirements for installations for electromagnetic stirring, transport or pouring of metal liquids[IEC 60519-11(1997)] Test methods for crucible induction furnaces [IEC 60646(1992)]
DOC.ETD 17(5616)
DOC.ETD 17(5617)
DRAFT STANDARDS FORMULATED 1 DOC.ETD 17(5612) Safety in electroheat installations: Part 1 General requirements [first revision of IS 60519 (Part 1):1984/ IEC 60519-1:1984] [IEC 60519-1(2003)] Safety in electroheat installations: Part 9 Particular requirements for high frequency dielectric heating installations [first revision of IS 60519 (Part 9):1987/ IEC 60519-9:1987]
DOC.ETD 17(5613)
ETD 18 INDUSTRIAL PROCESS MEASUREMENT AND CONTROL SCOPE - To prepare standards for systems and elements used for industrial process measurement and control concerning continuous and batch processes To coordinate the standardization of those features of related elements which affect suitability for integration into such systems operating with electrical, pneumatic, hydraulics mechanical or other systems of measurements and/or control
Sl. No. IS Number/ DOC Number Title Reaffirm Date Am
STANDARDS PUBLISHED 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 IS 2053:1974 * IS 2054:1962 * IS 2055:1962 * IS 2056:1962 * IS 2057:1962 IS 2711:1979 IS 2806:1992 IS 2848:1986 IS 3624:1987 IS 3944:1982 IS 4309:1979 IS 5883:1970 * IS 6720:1972 IS 6804:1972 IS 7358:1984 IS 7722:1975 Thermocouple pyrometers (first revision) Reference tables for nickel/chromiumnickel/aluminium thermocouples Reference tables for platinum/rhodium-platinum thermocouples Reference tables for copper-constantan thermocouples Reference tables for iron-constantan thermocouples Direct reading pH meters (second revision) Guide to electrical resistance thermometry (first revision) Industrial platinum resistance thermometer sensors (first revision) Pressure and vacuum gauges (second revision ) Methods for determination of flowtime by use of flow cups (first revision) Method of measurement on direct reading pH meters (first revision) Nickel resistance thermometer elements Reference tables for plantinum/30 percent rhodiumplatinum/6 percent rhodium thermocouples Glass electrodes for direct reading pH meters Thermocouples (first revision) Analogue pneumatic signals for process control systems Sep 2008 Sep 2005 Sep 2005 Sep 2005 Sep 2005 Sep 2008 Apr 2008 May 2006 Apr 2008 Sep 2005 Sep 2008 Sep 2008 Sep 2008 Sep 2008 Sep 2005 Sep 2008 2 2 2 2 1
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33
IS 7728:1984 * IS 7988:1976 IS 8018:1976 IS 8457:1977 IS 8493:1977 IS 8495(Part 1):1977 IS 8784:1987 IS 8824(Part 1):1978 IS 8824(Part 2):1988 IS 8935:1985 IS 9319:1979 IS 9334:1986 IS 9347:1979 IS 9463:1980 IS 10144:1982 * IS 10189(Part 1):1982 * IS 10189(Part 2/Sec 1):1993 | IEC 60534-2-1(1978) ** IS 10189(Part 2/Sec 2):1993 | IEC60534-2-2(1980) IS 10189(Part 2/Sec 1):2000 / IEC 60534-2-1:1998
Analogue dc current signals for process control systems (first revision) Reference tables for chromel-kopel thermocouples Platinum and platinum alloy wires for thermocouples elements Tyre pressure gauges for automobiles (Pocket type) Analogue dc voltage signals for industrial process measurements and control systems Ceramic components for thermocouples and resistance thermometers: Part 1 Terminal blocks Thermocouple compensating cable (second revision) Electrical moisture meters: Part 1 For foodgrains Electrical moisture meters: Part 2 For jute (conductivity type) Electric solenoid operated actuators (first revision) Electronic self-balancing potentiometric indicators and recorders Electric motor operated actuators (first revision) Charts for recording instruments Electronic self-balancing bridge indicators and recorders Electronic speed limiters for diesel vehicles Industrial process control valves: Part 1 General requirements and tests Industrial process control valves: Part 2 Flow capacity, Section 1 Sizing equations for incompressible fluid flow under installed conditions Industrial process control valves: Part 2 Flow capacity Secton 2 Sizing equations for compressible fluid flow under installed conditions Industrial process control valves Part2/Sec 1 Flow Capacity-sizing Equations for fluid flow under Installed conditions (superseading of IS 10189(Part 2/Sec 1):1992 Zener barrier for intrinsically safe process control instruments
** INDICATES STANDARDS TO BE REVISED | INDICATES EQUIVALENT STANDARDS 60
Sep 2005 Sep 2008 Sep 2008 Sep 2008 Sep 2005 Sep 2008 Apr 2008 Sep 2008 Sep 2005 Sep 2005 Sep 2008 May 2006 May 2006 Sep 2008 Sep 2008 Sep 2008 Sep 2008 1 1
34
Sep 2008
35
Sep 2008
36
IS 10398:1982
May 2006
37 38 39 40 41 42 43 44 45 46 47
* IS 10625:1983 IS 10639:1983 IS 11222:1985 ** IS 12051:1987 IS 12434:1988 IS 12554(Part 1):1988 IS 12554(Part 2):1999 IS 12555:1988 IS 12556:1988 IS 12579:1988 IS 13122(Part 1):1993
Reference tables for nickel/chromium-copper/nickel (chromel-constantan) thermocouples Disappearing filament type optical pyrometers Dials, scales and indexes for indicating analogue measuring instruments Reference tables for nickel-chromium-silicon (Nicrosil/Nisil) Type N Thermocouples Coating/plating thickness tester, destructive type Non-destructive coating thickness testing instruments: Part 1 Eddy current instruments Non-destructive coating thickness testing instruments: Part 2 Magnetic instruments Signal conditioning devices for process control systems Binary direct voltage signals for process measurement and control systems Base-metal mineral insulated thermocouple cables and thermocouples Transmitters for use in industrial process control systems: Part 1 Methods for evaluating the performance Transmitters for use in industrial process control systems: Part 2 Guidance, installation, inspection and routine testing Vapour pressure dial-type thermometers Expression of proformance of elctro chemical analyzers :Part 1 General Expression of performance of electrochemical analyzers :Part 2 pH values Expression of proformance of electrochemical analyzers: Part 3 Electrolytic conductivity Expression of performance of electrochemical analyzers :Part 4 Standard for measuring oxygen dissolved in water Expression of performance of electrochemical analyzers :Part 5 Oxidation reduction potential or retard potential Programmable controller: Part 1 General information (first revision) Programmable Controllers: Part 2 Equipment Requirements and Tests (first revision)
** INDICATES STANDARDS TO BE REVISED | INDICATES EQUIVALENT STANDARDS 61
Sep 2005 May 2006 Sep 2005 Sep 2008 Sep 2008 Sep 2008 Aug 2004 Sep 2008 Sep 2008 Sep 2008 May 2006
48
IS 13122(Part 2):1991
May 2006
49 50 51 52 53
May 2006 Sep 2008 Sep 2008 Sep 2008 Dec 2008 1
54
IS 13673(Part 5):1999
Feb 2009
55 56
57 58
IS 60534(Part 2/Sec 3):1997 / IEC 60534-2-3 :1997 IS 61508(Part 0):2000 / (IEC 61508-0:2005) IS 61508(Part 1):2000 / IEC 61508-1:2000 IS 61508(Part 2):2000 / (IEC 61508-2:2000)
Industrial - process control valves - Part 2/Sec 3 flow capacity test procedures Functional safety of electrical/electronic/progrtammable elctronic safety related system - Part 0: Functional Safety Functional safety of electrical/electronic/progrtammable elctronic safety related system - Part 1 General requirement Functional safety of electrical/electronic/progrtammable elctronic safety related system - Part 2 requirement for eectrical/Electronic/programmable electronic safety related systems Functional safety of electrical/electronic/progrtammable elctronic safety related system - Part 3 software requirements Functional safety of electrical/electronic/progrtammable elctronic safety related system - Part 4 Definitions and abbreviations Functional safety of electrical/electronic/progrtammable elctronic safety related system - Part 5 Examples of Methods for the determinations of safety integrity levels Functional safety of electrical/electronic/progrtammable elctronic safety related system - Part 6 Guidelies on the applications Functional safety of electrical/electronic/progrtammable elctronic safety related system - Part 7 Over view of techniques and measures Functional safety of electrical/electronic/progrtammable elctronic safety related system - Part 1 Famework, definitions,System, hardware and software requirements Functional safety - safety instrumented systems for the process industry sector Part 2 Guidelines for the Applications Functional safety - safety instrumented systems for the process industry sector - Part 3 Guidance for the determination of the required safety integrity levels Enterprise control system Integration Part 1 Models and Terminology Enterprise control system Integration Part 2 Objects Models Attributes
59
60
61
IS 61508(Part 3):1998 / (IEC 61508-3:1998) IS 61508(Part 4):1998 / (IEC 61508-4:1998) IS 61508(Part 5):1998 / (IEC 61508-5:1998)
62
63
64
65
66
67
IS 61511(Part 2):2003 / IEC 61511-2:2003 IS 61511(Part 3):2003 / IEC 61511-3:2003 IS 62264(Part 1):2003 / IEC 62264-1:2003 IS 62264(Part 2):2004 / IEC 62264-2:2004
68
69 70
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION 1 DOC.ETD 18(5671) Industrial Proess Control Valves - Part 1Control Valve Terminology and General Considerations [First revision of IS 10189(Part 1)] (IEC 60534-1:2005)
** INDICATES STANDARDS TO BE REVISED | INDICATES EQUIVALENT STANDARDS 62
DOC.ETD 18(5675)
ETD 19 HIGH VOLTAGE ENGINEERING SCOPE - To prepare standards for high voltage testing techniques and for different types of tests belonging there to such as high voltage ac, dc and impulse tests and high current impulse tests, definitions and basic principles of insulation coordination and insulation levels To prepare appllication guides recommending the insulation levels in relation to possibilities of over-voltage protection devices. The work also includes formulation of standards for clearances and creepage distances
Sl. No. IS Number/ DOC Number Title Reaffirm Date Am
STANDARDS PUBLISHED 1 2 3 * SP 39 : 1987 IS 1876:2005 / IEC 60052( 2002) IS 2071(Part 1):1993 / IEC 60060-1(1989) * IS 2071(Part 3):1976 ** IS 2165(Part 1):1977 | IEC 60071-1(1976) ** IS 2165(Part 2):1983 | IEC 60071-3(1982) * IS 3716:1978 | IEC 60071-2(1976) * IS 8690:1977 IS 15382(Part 1):2003 / IEC 60664-1(2002) IS 15382(Part 2/Sec 1):2003 / IEC 60664-2-1(1977) Special publication-Guide for insulation coordination within low voltage systems Voltage measurement by means of standard air gaps(first revision) High voltage test- techniques: Part 1 General definitions and test requirements (second revision). Methods of high voltage testing: Part 3 Measuring devices (first revision) Insulation coordination: Part 1 Phase to earth insulation coordination principles and rules (second revision) Insulation coordination: Part 2 Phase to phase insulation coordination principles and rules Application guide for insulation coordination (first revision) Application guide for measuring devices for high voltage testing Insulation coordination for equipment within low voltage system: Part 1 Principles requirements and test Insulation coordination for equipment within low voltage system : Part 2 Appication guide, Section 1 Dimensioning procedure worksheets and dimensioning examples Insulation coordination for equipment within low voltage system: Part 3 Use of coatings, potting or moulding for protection against pollution Insulation coordination for equipment within low voltage system: Part 4 Consideration of high frequency voltage stress Instruments and software used for measurement in high voltage impluse tests: Part 1 Requirements for instruments( Superseeding IS 11349) Mar 2006 Oct 2005 Aug 2008
4 5
Mar 2006
7 8 9
10
Sep 2008
11
IS 15382(Part 3):2006 / IEC 60664-3(2003) IS 15382(Part 4):2003 / IEC 60664-4(1997) IS 15638(Part 1):2006 / IEC 61083-1(2001)
Aug 2006
12
Sep 2008
13
Feb 2006
14
Instruments and software used for measurements in high voltage impulse tests: Part 2 Evaluation of software used for the determination of the parameters of impulse waveforms (Superseeding IS 11349)
Feb 2006
FINALISED DRAFTS UNDER PRINT 1 DOC.ETD 19(5429) High voltage test techniques - Partial discharge measurements (IEC 60270:2000) (Superseeding IS 6209)
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION 1 2 3 4 DOC.ETD 19(5833) DOC.ETD 19(6212) DOC.ETD 19(6222) DOC.ETD 19(6223) High Voltage test-techniques Part 3: Definitions and requirement for on-site testing (IEC 60060-3) Insulation Coordination-Part 2 Application Guide(IEC 60071-2:1996) Insulation Coordination - Part 1 Definitions, Principles and Rules (IEC 60071-2: 2006) High Voltage Test Techniques Part 2 Measuring Systems (IEC 60060-2:1994)
ETD 20 ELECTRICAL INSTALLATIONS SCOPE - To prepare standards for safety and related matters in designing, erection and maintenance of electrical installations from the point of view of safety and good practice that would, amongst other things, promote compatibility between such standards and those concerning the equipment installed The work includes electrical installations in buildings for different occupancies and outdoor sites of temporary or permanent nature and also installations in the ships NOTE- The standards to be prepared will not cover codes pertaining to individual equipment
Sl. No. IS Number/ DOC Number Title Reaffirm Date Am
STANDARDS PUBLISHED 1 2 3 4 5 6 7 8 9 * SP 30 : 1985 SP 31 : 1986 IS 732:1989 IS 2309:1989 IS 2551:1982 IS 3043:1987 IS 4648:1968 IS 5216(Part 1):1982 IS 5216(Part 2):1982 National Electrical Code Special Publication-Chart on treatment for electricshock Code of practice for electrical wiring installations (third revision) Code of practice for protection of buildings and allied structures against lightning (second revision) Danger notice plates (first revision) Code of practice for earthing Guide for electrical layout in residential buildings Recommendations on safety procedures and practices in electrical work: Part 1 General (first revision) Recommendations on safety procedures and practices in electrical work: Part 2 Life saving techniques (first revision) Guide for the control of undesirable static electricity (first revision) Guide for improvement of power factor in consumer installation: Part 1 Low and medium supply voltages Code of practice for design, installation and maintenance of service lines upto and including 650 V Guide on effects of current passing through human body: Part 1General aspects(first revision) Guide on effects of current passing through human body : Part 2 Special aspects (first revision). Code of practice for the installation of electric bells and call systems
** INDICATES STANDARDS TO BE REVISED | INDICATES EQUIVALENT STANDARDS 66
Mar 2005 Mar 2006 Mar 2010 Mar 2010 Mar 2010 Mar 2006 Aug 2007 Mar 2010 Mar 2010 2 1
10 11 12 13 14 15
IS 7689:1989 IS 7752(Part 1):1975 IS 8061:1976 IS 8437(Part 1):1992 / IEC 60479-1(1984) IS 8437(Part 2):1992 / IEC 60479-2(1987) IS 8884:1978
Mar 2010 Mar 2006 Mar 2006 Aug 2007 Aug 2007 Aug 2007
16 17
IS 8923:1978 IS 8969:1978
Warning symbol for dangerous voltages Code of practice for installation and maintenance of impulse and electronic master and slave electric clock systems Code of practice for selection, installation and maintenance of switchgear and controlgear : Part 1 General Code of practice for selection, installation and maintenance of Switchgear and controlgear : Part 2 Selection Code of practice for selection, installation and maintenance of switchgear and controlgear : Part 3 Installation Code of practice for selection, installation and maintenance of switchgear and controlgear : Part 4 Maintenance Electrical installations in ships: Part 1 General, Section 1 Definitions and general requirements (first revision) Electrical installations in ships: Part 2 System design, Section 1 General Electrical installations in ships: Part 2 System design, Section 2 Protection Electrical installationss in ships: Part 2 System design, Sec 4 Electric and electrohydraulic steering gear Electrical installations in ships: Part 3 Equipment, Section 1 Generators and motors Electrical installations in ships: Part 3 Equipment, Section 2 Switchgear and controlgear assemblies Electrical installations in ships: Part 3 Equipment, Section 3 Transformers for power and lighting Electrical installations in ships: Part 3 Equipment, Section 4 Semi-conductor convertors Electrical installations inn ships: Part 3 Equipment, Section 5 Accumulators (storage) batteries Electrical installations in ships: Part 3 Equipment, Section 6 Luminaires and accessories Electrical installations in ships:Part 3 Equipment, Section 7 Heating and cooking appliances Electrical installations in ships: Part 3 Equipment, Section 10 General construction and test requirements for low voltage shipboard power cables
18
IS 10118(Part 1):1982
Mar 2006
19
IS 10118(Part 2):1982
Mar 2006
20
IS 10118(Part 3):1982
Mar 2006
21
IS 10118(Part 4):1982
Mar 2006
22
IS 10242(Part 1/Sec 1):1997 | IEC 60092-101(1980) * IS 10242(Part 2/Sec 1):1982 | IEC 60092-201(1980) IS 10242(Part 2/Sec 2):1983 | IEC 60092-202(1980) IS 10242(Part 2/Sec 4):1993 | IEC 60092-204(1987) IS 10242(Part 3/Sec 1):1983 | IEC 60092-301(1980) IS 10242(Part 3/Sec 2):1984 | IEC 60092-302(1980) IS 10242(Part 3/Sec 3):1984 | IEC 60092-303(1980) IS 10242(Part 3/Sec 4):1987 | IEC 60092-304(1980) IS 10242(Part 3/Sec 5):1990 | IEC 60092-305(1980) IS 10242(Part 3/Sec 6):1986 | IEC 60092-306(1980) IS 10242(Part 3/Sec 7):1990 | IEC 60092-307(1980) IS 10242(Part 3/Sec 10):1992 | IEC 60092-350
Sep 2007
23 24 25
26 27 28 29 30 31 32 33
Sep 2007 Sep 2007 Sep 2007 Sep 2007 Sep 2007 Sep 2007 Sep 2007 Mar 2009
34
IS 10242(Part 3/Sec 11):1986 | IEC 60092-351(1983) IS 10242(Part 3/Sec 12):1986 | IEC 60092-352(1979) IS 10242(Part 3/Sec 13):1992 | IEC 60092-353(1988) IS 10242(Part 3/Sec 19):1990 | IEC 60092-359(1987) IS 10242(Part 3/Sec 23):1987 | IEC 60092-373(1977)
Electrical installations in ships: Part 3 Equipment, Section 11 Insulating materials for shipboard power cables Electrical installations in ships: Part 3 Equipment, Section 12 Choice and installation of cables for low voltage systems Electrical installations in ships: Part 3 Equipment, Section 13 Single and multicore cables with extruded solid insulation for rated voltage 0.6/1 kV Electrical installations in ships: Part 3 Equipment, Section 19 Sheathing materials for telecommunication and power shipboard cables Electrical installations in ships: Part 3 Equipment, Section 23 Shipboard telecommunication cables and radio frequency cables: Shipboard flexible coaxial cables Electrical installations in ships: Part 3 Equipment, Section 24 Shipboard telecommunication cables and radiofrequency cables: Telephone cables for nonessential communication services Electrical installations in ships: Part 3 Equipment, Section 25 Shipboard telecommunication cables and radio frequency cables: General instrumentation, control and communication cables Electrical installations in ships: Part 3 Equipment, Section 26 Shipboard telecommunication cables: Shipboard multicore cables for control circuits Electrical installations in ships: Part 4 Installation and test of completed installation Electrical installations in ships: Part 5 Special features, Sec 1 Electric propulsion plant Electrical installations in ships: Part 5 Special features, Section 2 Tankers Electrical installations in ships: Part 5 Special features Sec 3 ac supply system with voltage in the range above 1 kV up to and including 11 kV Electrical installations in ships : Part 5 Special features, Section 4 Control and instruments Guide for short circuit current calculations ln three-phase ac systems(superseding IS 5728) Calculation of the effects of short-circuit currents Superseding IS 5728:1970) Electromagnetic compatibility of electrical and electronic installation in ships
Sep 2007
35
Sep 2007
36
Sep 2007
37
Sep 2007
38
Sep 2007
39
Sep 2007
40
Sep 2007
41
IS 10242(Part 3/Sec 26):1987 | IEC 60092-376(1983) IS 10242(Part 4):1992 | IEC 60092-401(1980) IS 10242(Part 5/Sec 1):1993 | IEC 60092-501(1984) * IS 10242(Part 5/Sec 2):1997 | IEC 60092-502(1999) IS 10242(Part 5/Sec 3):1993 | IEC 60092-503(1975) IS 10242(Part 5/Sec 4):1998 | IEC 60092-504(2001) IS 13234:1991 / IEC 60909(1988) IS 13235:1991 / IEC 60865(1986) IS 14479:1997 | IEC 60 533(1999)
Sep 2007
42 43 44 45
46 47 48 49
FINALISED DRAFTS UNDER PRINT 1 DOC.ETD 20(5498) National Electrical Code(first revision of SP 30)
** INDICATES STANDARDS TO BE REVISED | INDICATES EQUIVALENT STANDARDS 68
DRAFT STANDARDS FORMULATED 1 DOC.ETD 20(5838) Revision of IS 732 Electrical Wiring Installations
ETD 21 ELECTRIC WELDING EQUIPMENT SCOPE - To prepare standards on the construction, performance, testing and safety requirements for electric welding equipment and accessories for both arc and resistance type
Sl. No. IS Number/ DOC Number Title Reaffirm Date Am
STANDARDS PUBLISHED 1 2 3 4 5 6 7 IS 1851:1997 | ISO 700(1982) IS 2635:1997 IS 2641:1989 IS 4559:1993 | ISO 700(1982) IS 4804(Part 1):1968 IS 4804(Part 2):1968 IS 4804(Part 3):1969 Single Operator type arc welding transformers (third revision) dc electric welding generators (third revision) Electrical welding accessories (first revision) Single operator rectifier type dc arc welding power source (second revision) Resistance welding equipment : Part 1 Single phase transformers Resistance welding equipment: Part 2 Single phase rocker-arm spot welding machines Resistance welding equipment: Part 3 Single phase spot and projection welding machines Resistance welding equipment: Part 4 Single phase stationary, press type roll-spot and seam welding machines Single operator ac/dc arc welding power source (first revision) Automatic and semi-automatic welding equipment with self-adjusting arcs (MIG/MAG processes) : Part 1 dc welding generator power source Automatic and semi-automatic welding equipment with self-adjusting arcs (MIG/MAG Processes): Part 2 Transformer rectifier power source Automatic and semi-automatic welding equipment with self-adjusting arcs (MIG/MAG Processes): Part 3 Welding gun and ancillary equipment Plugs, sockets and terminal arrangements and welding cable connectors for manual welding equipment (first revision) Tungsten-inert gas (TIG) welding equipment Multi-operator type arc welding transformers Sep 2007 Sep 2007 Jun 2005 Mar 2009 Jun 2005 Jun 2005 Jun 2005 1 1
IS 4804(Part 4):1973
Jun 2005
9 10
11
IS 7931(Part 2):1975
Mar 2009
12
IS 7931(Part 3):1975
Mar 2009
13
Mar 2009
14 15
ETD 22 ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES SCOPE - To prepare guidelines and requirements for electrical apparatus for use where there is a hazard due to the possible presence of ignitable gas, vapour liquid particles or dust in the atmosphere.
Sl. No. IS Number/ DOC Number Title Reaffirm Date Am
STANDARDS PUBLISHED 1 2 IS 4051:1967 IS 5571:2009 | IEC 60079-14:2002 IS 5572:2009 | IEC 60079-10(2002) IS 5679:1986 * IS 7693:2004 / IEC 60079-6(1995) IS 7820:2004 / IEC 60079-4(1975) IS 9559:1980 IS 9570:1980 | IEC 60079-12 (1978) IS 9735:2003 / IEC 60079-1-1(2002) Code of practice for installation and maintenance of electrical equipment in mines Guide for selection and installation of electrical equipment in hazardous areas (other than mines (third revision) Classification of hazardous areas (other than mines) having flammable gases and vapours for electrical installation (third revision) Miners' cap lamp assemblies (incorporating lead acid type batteries) (first revision) Electrical apparatus for explosive gas atmospheres Oil immersion "o" (first revision) Electrical apparatus for explosive gas atmospheres Method of test for ignition temperatures (first revision) Guide for selection of electrical and electronic equipment for coal mines Classification of flammable gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents Electrical apparatus for explosive gas atmospheres Flameproof enclosures "d" Method of test for ascertainment of maximum experimental safe gap (first revision) Exploders Guide for construction and use of rooms or buildings protected by pressurization for installation of electrical apparatus for explosive gas atmospheres Code of practice for the selection, installation and maintenance of electrical apparatus for use in potentially explosive atmospheres(other than mining application or explosive processing manufacture): Part 1 General recommendations Resistance trace heating in potentially explosive atmospheres: Part 1 General and testing requirements Resistance trace heating in potentially explosive atmospheres: Part 2 Informative application guide for design, installation and maintenance
** INDICATES STANDARDS TO BE REVISED | INDICATES EQUIVALENT STANDARDS 71
Oct 2006
4 5 6 7 8
Oct 2006 Apr 2009 May 2009 Oct 2006 Oct 2006
1 1
Dec 2008
10 11
12
Mar 2008
13 14
15
IS 15142:2002
Guide to the use of electrical apparatus for potentially explosive atmospheres in the presence of combustible dusts Electrical apparatus for explosive gas atmospheres: Part 0 General requirements (superseding IS 13346) Explosive atmospheres : Part 1 Equipment protection by flameproof enclosures "d" (superseding IS 2148:2004 ) Explosive atmospheres: Part 2 Equipment protection by pressurized enclosure "p" (superseding IS 7389:2004) Explosive atmospheres: Part 5 Equipment protection by powder filling "q" (superseding IS 7724:2004) Explosive atmospheres: Part 7 Equipment protection by increased safety "e" (superseding IS 6381:2004) Explosive atmospheres: Part 11 Equipment protection by intrinsic safety "i" (superseding IS 5780:2002) Electrical apparatus for explosive gas atmospheres : Part 15 Construction, test and marking of type of protection "n" electrical apparatus (superseding IS 8289) Electrical apparatus for explosive gas atmospheres: Part 16 Artificial ventilation for the protection of analyzer(s) houses Explosive atmospheres : Part 17 Electrical installations inspection and maintenance Electrical apparatus for explosive gas atmospheres : Part 18 Construction, test and marking of type of protection encapsulation "m" electrical apparatus (superseding IS 15451) Explosive atmospheres : Part 19 Repair, overhaul and reclamation Electrical apparatus for explosive gas atmospheres : Part 20 Data for flammable gases and vapours relating to the use of electrical apparatus Electrical apparatus for explosive gas atmospheres : Part 25 Intrinsically safe systems Electrical apparatus for use in the presence of combustible dust: Part 0 General requirements (Superseding IS 14154(Part 1) Electrical apparatus for use in the presence of combustible dust: Part 1 Protection by enclosures tD (Superseding IS 12315 (Part 1) Electrical apparatus for use in the presence of combustible dust: Part 2 Test methods, Section 3 Method for determining minimum ignition energy of dust/air mixtures
** INDICATES STANDARDS TO BE REVISED | INDICATES EQUIVALENT STANDARDS 72
Sep 2007
16 17
IS 60079:2004 / IS/IEC 60079-0(2004) IS 60079(Part 1):2007 / IS/IEC 60079-1(2007) IS 60079(Part 2):2007 / IS/IEC 60079-2(2007) IS 60079(Part 5):2007 / IS/IEC 60079-5(2007) IS 60079(Part 7):2006 / IEC 60079-7 (2006) IS 60079(Part 11):2006 / IS/IEC60079-11(2006) IS 60079(Part 15):2005 / IS/IEC60079-15(2005)
18
19 20 21
22
23
IS 60079(Part 16):1990 / IEC 60079-16 (1990) IS 60079(Part 17):2007 / IEC 60079-17 (2007) IS 60079(Part 18):2004 / IS/IEC 60079-18:2004
24 25
26 27
IS 60079(Part 19):2006 / IS/IEC60079-19(2006) IS 60079(Part 20):1996 / IEC 60079-20 (1996) IS 60079(Part 25):2003 / IS/IEC60079-25(2003) IS 61241:2004 / IS/IEC 61241-0(2004) IS 61241(Part 1):2004 / IS/IEC 61241-1(2004) IS 61241(Part 2/Sec 3):1994 / IS/IEC61241-2-3:1994
28 29
30
31
32
IS 61241(Part 10):2004 / IS/IEC 61241-10:2004 IS 61241(Part 11):2005 / IS/IEC 61241-11:2005 IS 61241(Part 14):2004 / IS/IEC 61241-14:2004 IS 61241(Part 18):2004 / IS/IEC 61241-18:2004
Electrical apparatus for use in the presence of combustible dust: Part 10 : Classification of areas where combustible dusts are or may be present Electrical apparatus for use in the presence of combustible dust: Part 11 Protection by intrinsic safety iD Electrical apparatus for use in the presence of combustible dust: Part 14 Selection and installation (Superseding IS 14154 (Part 2) Electrical Apparatus for Use in the Presence of Combustible Dust: Part 18 Protection by Encapsulation mD
33
34
35
FINALISED DRAFTS UNDER PRINT 1 DOC.ETD 22(5901) / IEC 61241-2-1(1994) Electrical apparatus for use in the presence of combustible dust: Part 2 Test methods, Section 1 Method for determining the minimum ignition temperatures of dust (Superseding IS 12315(Part 1):1988) Electrical apparatus for use in the presence of combustible dust: Part 4 Type of protection pD Explosive atmospheres: Part 6 Equipment protection by oil immersion "o" (superseding IS 7693:2004) Explosive atmospheres - Part 29-1: Gas detectors Performance requirements of detectors for flammable gases Explosive atmospheres - Part 29-2: Gas detectors selection, installations, use and maintenance of detectors for flammable gases and oxygen
2 3 4
DOC.ETD 22(5903) / IEC 61241-4 (2004) DOC.ETD 22(5912) / IEC 60079-6 (2007) DOC.ETD 22(6103)
DOC.ETD 22(6104)
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION 1 DOC.ETD 22(6232) Explosive Atmospheres. Part 0: Equipment - General Requirements (First revision of IS/IEC 60079-0) Jan 19E0 rror
DRAFT STANDARDS FORMULATED 1 DOC.ETD 22(6191) Code of practice for electrical and electronic equipment for belowground coal mines (First revision of IS 4051)
ETD 23 ELECTRIC LAMPS AND THEIR AUXILIARIES SCOPE - To prepare standards for all types of electric lamps, caps and their auxiliaries (luminaires are excluded)
Sl. No. IS Number/ DOC Number Title Reaffirm Date Am
STANDARDS PUBLISHED 1 2 3 4 IS 418:2004 | IEC 60064(1993) IS 897:1982 IS 1534(Part 1):1977 | IEC 82(1973) IS 1569:1976 | IEC 566 IS 1901:1978 IS 2215:2006 | IEC 60155 (1993) IS 2261:1975 IS 2262:1963 IS 2407:1963 IS 2418(Part 1):1977 | IEC 81(1974) IS 2418(Part 2):1977 | IEC 81(1974) IS 2418(Part 3):1977 | IEC 61-1(1969) IS 2418(Part 4):1977 | IEC 61-3(1969) IS 2592:1980 IS 2596:2004 IS 6616:1982 | IEC 262(1969) Tungsten filament lamps for domestic and similar general lighting purposes (fourth revision) Tungsten filament electric lamps for railway rolling stock (second revision) Ballasts for fluorescent lamps: Part 1 For switch start circuits (second revision) Capacitors for use in tubular fluorescent high pressure mercury and low pressure sodium vapour discharge lamp circuits ( first revision) Visual indicator lamps (first revision) Starters for fluorescent lamps (third revision) Lamps for flashlights (first revision) Transformers for high voltage luminous discharge tubes Photometric integrators Tubular fluorescent lamps for general lighting service: Part 1 Requirements and tests (first revision) Tubular fluorescent lamps for general lighting service : Part 2 Standard lamp data sheets (first revision) Tubular fluorescent lamps for general lighting service : Part 3 Dimensions of G-5and G-13 bi-pin caps (first revision) Tubular fluorescent lamps for general lighting service: Part 4 Go and no-go gauges for G-5 and G-13 bi-pin caps (first revision) Lamps for lighting on board ships (first revision) Bulbs (lamps) for miners cap lamps (second revision) Ballasts for high pressure mercury vapour lamps (first revision)
** INDICATES STANDARDS TO BE REVISED | INDICATES EQUIVALENT STANDARDS 74
2 3 5 1
5 6 7 8 9 10 11 12
Oct 2007
Dec 2005 Jul 2006 Oct 2007 Dec 2005 Jul 2006 Jul 2006
6 3 1
13
Oct 2007
14 15 16
Oct 2007
Jul 2006
17 18 19 20 21 22 23 24 25
IS 6701:1985 | IEC 61-1(1969) IS 7013:1981 IS 7027:1984 | IEC 452(1982) IS 8685:1977 | IEC 60434 (1973) IS 8901:1978 IS 8913:1978 | IEC 360(1971) IS 9206:1979 | IEC 60061-1(1972) IS 9589:1980 IS 9900(Part 1):1981 | IEC 188(1974) IS 9900(Part 2):1981 | IEC 188(1974) IS 9900(Part 3):1981 | IEC 188(1974) IS 9900(Part 4):1981 | IEC 61-3(1969) IS 9974(Part 1):1981 | IEC 662(1980) IS 9974(Part 2):1981 | IEC 662(1980) IS 11980:1987 IS 12449(Part 1):1988 | IEC 60926 IS 12449(Part 2):1988 | IEC 60927 IS 12897:2001 IS 12948:1990 | IEC 60357(1982) IS 13021(Part 1):1991 | IEC 60928(1990)
Tungsten filament miscellaneous electric lamps (first revision) Radio dial lamps (first revision) Transistorized ballasts for fluorescent lamps (first revision) Aircraft lamps Lamps for aerodrome lighting fittings Methods of measurement of lamp cap temperature rise Dimensions of caps for tungsten filament general service electric lamps Electric lamps for railway signalling High pressure mercury vapour lamps: Part 1 Requirements and test (Superseding IS:2183 and IS:7023) High pressure mercury vapour lamps: Part 2 Standard lamp data sheets (superseding IS: 2183 and IS: 7023) High pressure mercury vapour lamps : Part 3 Dimensions of lamp caps (superseding IS:2183 and IS:7023) High pressure mercury vapour lamps : Part 4 Go and no-go gauges of lamp caps (superseding IS:2183 and IS:7023) High pressure sodium vapour lamps : Part 1 General requirements and tests High pressure sodium vapour lamps : Part 2 Standard lamp data sheets Lamp (bulb) cycle dynamo Starting devices (other than glow starters): Part 1 General and safety requirements Starting devices (other than glow starters): Part 2 Performance requirements Filaments for general service lamps-Guide (first revision) Tungsten halogen lamps (non-vehicle) AC supplied electronic ballasts for tubular florescent lamps: Part 1 General and safety requirements
Jul 2006 Oct 2007 Jul 2006 Jul 2006 Jul 2006 Oct 2007 Dec 2005 Oct 2007 Oct 2007
26 27
28
Oct 2007
29 30 31 32 33 34 35 36
Oct 2007 Oct 2007 Oct 2007 Jun 2008 Jun 2008 Mar 2006 Jul 2006 Dec 2005
4 2
1 1 1
37 38 39 40 41
IS 13021(Part 2):1991 | IEC 60929(1990) IS 14897:2000 | IEC 60887(1988) IS 15111(Part 1):2002 | IEC 60968(1988) IS 15111(Part 2):2002 | IEC 60969(1988) IS 15518(Part 1):2004 | IEC 60432-1 (1999) IS 15687(Part 1):2006 | IEC 61199 (1999)
AC supplied electronic ballasts for tubular florescent lamps: Part 2 Performance requirements Glass bulb designation system for lamps-Guide Self ballasted lamps for general lighting services : Part 1 Safety requirements Self ballasted lamps for general lighting services : Part 2 Performance requirements Safety requirements for incandescent lamps : Part 1 Tungsten filament lamps for domestic and similar general lighting purposes Single-capped fluorescent lamps: Part 1 Safety requirements
Dec 2005 Dec 2005 Jan 2007 Feb 2007 Sep 2003
3 7 2
42
FINALISED DRAFTS UNDER PRINT 1 2 DOC.ETD 23(5717) DOC.ETD 23(5718) Safety of lamp controlgear: Part 1 General requirements Safety of lamp controlgear: Part 2 Particular requirements, Sec 1 Starting devices (other than glow starters [Superseding IS 12449 (Part 1) :1982] Safety of lamp controlgear: Part 2 Particular requirements, Sec 3 ac supplied electronic ballasts for fluorescent lamps [Superseding IS 13021 (Part 1) :1982] Safety of lamp controlgear: Part 2 Particular requirements, Sec 8 Ballasts for fluorescent lamps Safety of lamp controlgear: Part 2 Particular requirements, Sec 9 Ballasts for discharge lamps (excluding fluorescent lamps) Single-capped fluorescent lamps: Part 2 Performance requirements Capacitor for tubular fluorescent lamps: Part 1 Safety requirements Capacitor for tubular fluorescent lamps: Part 2 Performance requirements Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements [Superseding IS 6616 :1982] Ballasts for tubular fluorescent lamps - Performance requirements ac supplied electronic ballasts for tubular fluorescent lamps - Performance requirements Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements
DOC.ETD 23(5719)
4 5
6 7 8 9
10 11 12
13
DOC.ETD 23(6109)
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION 1 DOC.ETD 23(6062) Double-capped fluorescent lamps for general lighting service - Specification: Part 2 Performance requirements [second revision of IS 2418 (Part 2)] Metal halide lamps
DOC.ETD 23(6075)
ETD 24 ILLUMINATION ENGINEERING AND LUMINAIRES SCOPE - To prepare codes of practice for interior and exterior lighting and standards for luminaires (including luminaires for use in hazardous area, aviation lighting, emergency lighting etc.
Sl. No. IS Number/ DOC Number Title Reaffirm Date Am
STANDARDS PUBLISHED 1 IS 1944(Part 5):1981 Code of practice for lighting of public thoroughfare: Part 5 Lighting for grade separated junctions, bridges and elevated roads (Group D) Code of practice for lighting of public thoroughfare: Part 6 Lighting for towns and city centres and areas of civic importance (Group E) Code of practice for lighting of public thoroughfare: Part 7 Lighting for roadswith special requirements (Group F) Code of practice for lighting of public thoroughfare: Parts 1 and 2 For main and secondary roads (Group A and B) (first revision) (Parts 1 and 2 in one volume) Code of practice for library lighting Waterproof electric lighting fittings Watertight electric lighting fittings Code of practice for interior illumination: Part 1 General requirements and recommendations for working interiors (first revision) Code of practice for interior illumination: Part 2 Schedule of illumination and glare index Code of practice for interior illumination: Part 3 Calculation of coefficients of utilization by the BZ method Code of practice for hospital lighting Decorative lighting outfits Code of pratice for industrial lighting Road traffic signals Cast acrylic sheets for use in luminaires (first revision) Mar 2008
IS 1944(Part 6):1981
Mar 2008
IS 1944(Part 7):1981
Mar 2008
Mar 2008
5 6 7 8
9 10
11 12 13 14 15
May 2005 May 2005 May 2005 Mar 2008 Mar 2008 1
16 17 18
Method of photometric testing of incandescent type luminaires for general lighting service Elevated type aerodrome lighting fittings: Part 1 General requirements Elevated type aerodrome lighting fittings: Part 2 Fixed focus high intensity bi-directional runway edge lighting fittings Elevated type aerodrome lighting fittings: Part 3 Low intensity runway edge lighting fittings Elevated type aerodrome lighting fittings: Part 4 Angle of approach lights, Section 1 Visual approach slope indicators Elevated type aerodrome lighting fittings: Part 5 Approach lighting fittings, Section 1 High intensity elevated approach lighting fittings Elevated type aerodrome lighting fittings: Part 6 Taxiway lights, Section 1 Low intensity omni-directional elevated taxiway lighting fittings Luminaires for hospitals Emergency lighting units Luminaires: Part 1 General requirements Luminaires: Part 2 Constructional requirements Luminaires:Part 3 Screw and screwless terminations (superseding IS:6585) Luminaires: Part 4 Methods of tests Luminaires: Part 5 Particular requirements, Section 1 General purpose luminaires Luminaires: Part 5 Particular requirements, Section 2 Recessed luminaires Luminaires:Part 5 Particular requirements, Section 3 Luminaires for road and street lighting (superseding IS:2149) Luminaires: Part 5 Particular requirements, Section 4 Portable general purpose luminaires Luminaires: Part 5 Particular requirements, Section 5 Flood lights (superseding IS:1947) Code of practice for lighting of educational institutions
19 20
21
Mar 2008
22
Mar 2008
23 24 25 26 27 28 29 30 31
IS 8030:1976 | IEC 162(1972) IS 9583:1981 | IEC 598-2-22(1980) * IS 10322(Part 1):1982 | IEC 598-1(1979) IS 10322(Part 2):1982 | IEC 598-1(1979) IS 10322(Part 3):1984 IS 10322(Part 4):1984 | IEC 598-1(1979) IS 10322(Part 5/Sec 1):1985 | IEC 60598-2-1(1979) IS 10322(Part 5/Sec 2):1985 | IEC 60598-2-2(1979) IS 10322(Part 5/Sec 3):1987 | IEC 60598-2-3(1979) IS 10322(Part 5/Sec 4):1987 | IEC 60598-2-4(1979) IS 10322(Part 5/Sec 5):1987 | IEC 60598-2-5 IS 10894:1984
Mar 2008 Mar 2008 May 2005 May 2005 May 2005 May 2005 May 2005 May 2005 May 2005 2 1 4
32 33 34
1 1
35 36 37 38 39 40 41
IS 10947:1984 IS 11071(Part 1):1984 IS 11071(Part 2):1984 IS 11071(Part 3):1984 IS 11071(Part 4):1984 IS 11116:1984 IS 11472(Part 1):1985
Code of practice for lighting for ports and harbours Inset type aerodrome lighting fittings: Part 1 General requirements and tests Inset type aerodrome lighting fittings: Part 2 Runway centre line lighting fittings Inset type aerodrome lighting fittings: Part 3 Approach lighting fittings Inset type aerodrome lighting fittings: Part 4 Touchdown zone lighting fittings Code of practice for lighting for airport aprons Artificial day light for the assessment of colours: Part 1 Illuminant for colour matching and colour appraisal Artificial day light for the assessment of colours: Part 2 Viewing conditions for graphic arts industry Isolating transformers for airport lighting Constant current regulators for airport systems Code of practice for installation and maintenance of aerodrome lighting fittings: Part 1 Installation Code of practice for installation and maintenance of aerodrome lighting fittings: Part 2 Maintenance Methods of photometry of luminaires: Part 1 For use in interior lighting Methods of photometry of luminaires: Part 2 For road and street lighting Methods of photometry of luminaires: Part 3 For flood lighting
May 2005 May 2005 May 2005 May 2005 May 2005 May 2005 Mar 2008
42 43 44 45 46 47 48 49
IS 11472(Part 2):1985 IS 12290:1987 IS 12291:1987 IS 12309(Part 1):1988 IS 12309(Part 2):1988 IS 13383(Part 1):1992 IS 13383(Part 2):1992 IS 13383(Part 3):1992
Mar 2008 Mar 2008 Mar 2008 Mar 2008 Mar 2008 May 2005 Oct 2005 May 2005 1
FINALISED DRAFTS UNDER PRINT 1 2 3 4 5 DOC.ETD 24(5442) DOC.ETD 24(5443) DOC.ETD 24(5444) DOC.ETD 24(5445) DOC.ETD 24(5446) National lighting code: Part 1 Lighting vocabulary National lighting code: Part 2 Physics of light, Section 1 General principles National lighting code: Part 2 Physics of light, Section 2 Vision National lighting code: Part 2 Physics of light, Section 3 Colour National lighting code: Part 3 Electric light and their accessories, Section 1 Electric light sources
** INDICATES STANDARDS TO BE REVISED | INDICATES EQUIVALENT STANDARDS 80
6 7 8 9 10 11 12 13 14 15 16 17
DOC.ETD 24(5447) DOC.ETD 24(5448) DOC.ETD 24(5449) DOC.ETD 24(5450) DOC.ETD 24(5451) DOC.ETD 24(5452) DOC.ETD 24(5453) DOC.ETD 24(5454) DOC.ETD 24(5455) DOC.ETD 24(5456) DOC.ETD 24(5457) DOC.ETD 24(5458)
National lighting code: Part 3 Electric light and their accessories, Section 2 Control-gear for light sources National lighting code: Part 4 Luminaires, Section 1 Classification of luminaries National lighting code: Part 4 Luminaires, Section 2 Photometry National lighting code: Part 5 Interior illumination, Section 1 Industrial lighting National lighting code: Part 5 Interior illumination, Section 2 Office lighting National lighting code: Part 5 Interior illumination, Section 3 Educational lighting National lighting code: Part 5 Interior illumination, Section 4 Hospital lighting National lighting code: Part 5 Interior illumination, Section 5 Lighting for other public buildings National lighting code: Part 6 Exterior illumination, Section 1 General features National lighting code: Part 6 Exterior illumination, Section 2 Industrial area lighting National lighting code: Part 6 Exterior illumination, Section 3 Security lighting National lighting code: Part 6 Exterior illumination, Section 4 Decorative lighting (monument, park and garden) National lighting code: Part 6 Exterior illumination, Section 6 Sports lighting National lighting code: Part 6 Exterior illumination, Section 7 Mass rapid transit transport system (MRTS) National lighting code: Part 7 Lighting for hazardous areas National lighting code: Part 8 Road lighting National lighting code: Part 9 Energy-effective lighting system National lighting code: Part 10 Installation aspects for lighting, Section 1 Mechanical National lighting code: Part 10 Installation aspects for lighting, Section 2 Electrical National lighting code: Part 10 Installation aspects for lighting, Section 3 Coordination with related disciplines
18 19 20 21 22 23 24 25
DOC.ETD 24(5460) DOC.ETD 24(5461) DOC.ETD 24(5462) DOC.ETD 24(5463) DOC.ETD 24(5464) DOC.ETD 24(5465) DOC.ETD 24(5466) DOC.ETD 24(5467)
26 27 28 29 30
DOC.ETD 24(5468) DOC.ETD 24(5469) DOC.ETD 24(5471) DOC.ETD 24(5797) / IEC 60598-1(2003-10) DOC.ETD 24(5994)
National lighting code: Part 11 Daylighting for buildings National lighting code: Part 12 Emergency lighting National lighting code: Part 14 Lighting maintenance Luminaires: Part 1 General requirements and tests [first revision of IS 10322 (Part 1 to Part 4)] Luminaires: Part 5 Particular requirements, Sec 2 Recessed luminaires [first revision of IS 10322 (Part 5/Sec 2)] Luminaires: Part 5 Particular requirements, Sec 1 Fixed general purpose luminaires [first revision of IS 10322 (Part 5/Sec 1)] Luminaires: Part 5 Particular requirements, Sec 3 Luminaires for road and street lighting [first revision of IS 10322 (Part 5/Sec 3)]
31
DOC.ETD 24(6038)
32
DOC.ETD 24(6039)
DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT 1 DOC.ETD 24(6120) Luminaires: Part 5 Particular requirements, Sec 4 Portable General Purpose [first revision of IS 10322 (Part 5/Sec 4)] Luminaires: Part 5 Particular requirements, Sec 5 Flood lighting [first revision of IS 10322 (Part 5/Sec 5)] Luminaires: Part 5 Particular requirements, Sec 6 Hand lamps Luminaires: Part 5 Particular requirements, Sec 7 Lighting chains Luminaires: Part 5 Particular requirements, Sec 8 Emergency lighting
DOC.ETD 24(6121)
3 4 5
ETD 25 LIFTS AND ESCALATORS SCOPE - To prepare standards and codes of practice for electrically operated lifts and escalators, including equipment and components
Sl. No. IS Number/ DOC Number Title Reaffirm Date Am
STANDARDS PUBLISHED 1 2 3 4 IS 4591:1968 IS 8216:1976 IS 14665(Part 1):2000 Code of practice for installation and maintenance of escalators Guide for inspection of lift wire ropes Electric traction lifts :Part 1 Outline dimensions (superseeding IS 3534:1976) Feb 2007 Feb 2007 Oct 2005 May 2005
IS 14665(Part 2/Sec 1 & 2):2000 Electric traction lifts :Part 2 Code of prtactice for installation , operation and maintenance, Section 1 Passengers and goods lifts (Superseeding IS 1860:1980) ,Section 2 Service lifts (superseeding IS 6620:1972) IS 14665(Part 3/Sec 1 & 2):2000 Electric traction lifts :Part 3 Safety rules , Section 1 Passenger and goods lifts (superseeding IS 4666:1980), Section 2 Service lifts (superseeding IS 6383:1971) IS 14665(Part 4/Sec 1-9):2001 Electric traction lifts :Part 4 Components, Section 1 Lift buffers (superseding IS 9803:1981), Section 2 Lift guide rails and guide shoes (superseding IS 10191:1982 and IS 11615:1986,Section 3 Lift car frame, car counterweight and suspension (superseding IS 11706:1986), Section 4 Lift safety gears and governors (superseding IS 9878:1981), Section 5 Lift retiring cam (superseding IS 10448:1983), Section 6 Lift doors, locking devices and contacts (superseding IS 7759:1975 and 11633:1986), Section 7 Lift machines and brakes (superseding IS 10913:1984), Section 8 Lift wire ropes, Section 9 Controller and operating devices Electric traction lifts:Part 5 Inspection manual Code of practice for instalation and maintenance of hydraulic lifts Installation and maintenance of home lifts - Code of practice Code of practice for installation and maintenance of lifts for handicapped persons Code of practice for installation and maintenance of lifts without conventional machine rooms
May 2005
Jun 2006
7 8 9 10 11
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION 1 2 DOC.ETD 25(5975) DOC.ETD 25(6105) Code of practice for installation and maintenance of escalators and passanger conveyors Electric traction lifts: Part 10 Poly phase electric motors for driving electric traction lifts
ETD 28 SOLAR PHOTOVOLTAIC ENERGY SYSTEMS SCOPE - To prepare standards for systems of photovoltaic conversion of solar energy into electrical energy and for all the elements in the entire photovoltaic energy systems In this context, the concept photovoltaic energy systems includes the entire field from light input to solar cell and including the interface with the electrical system(s) to which energy is supplied
Sl. No. IS Number/ DOC Number Title Reaffirm Date Am
STANDARDS PUBLISHED 1 2 3 * IS 12762(Part 1):1989 / IEC 60904-1(1987) IS 12762(Part 2):1993 / IEC 60904-2(1989) IS 12762(Part 3):1998 / IEC 60904-3(1989) IS 12763:1989 / IEC 60891(1987) IS 12834:1989 ** IS 14153:1994 IS 14244:1995 / IEC 61194(1992) * IS 14286:1995 | IEC 61215 (1993) Photovoltaic devices: Part 1 Measurement of photovoltaic current voltage characteristics Photovotaic devices: Part 2 Requirements for reference solar cells Photovoltaic devices: Part 3 measurement principles for terrestrial (PV) solar devices with reference spectral irradiance data Procedures for temperature and irradiance corrections to measured I-V characteristics of crystaline silicon photovoltaic devices Solar photovoltaic energy systems-Terminology Guide for general description of photovoltaic (PV) power generating systems Characteristic parameters of stand alone photovoltaic (PV) systems Qualification test procedures for crystaline silicon photovoltaic modules Jan 2010 Apr 2009 Apr 2009
Jan 2010
5 6 7 8
FINALISED DRAFTS UNDER PRINT 1 DOC.ETD 28(6014) Photovoltaic devices: Part 1 Measurement of photovoltaic current-voltage characteristics [first revision of IS 12762 (Part 1)] (IEC 60904-1:2006) Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualiication and type approval (first revision of IS 14286) (IEC 61215:2005) Photovoltaic devices: Part 5 Determination of the equivalent cell temperature (ECT) of photovoltaic (PV) devices by the open-circuit voltage method (IEC 60904-5:1993) Photovoltaic devices: Part 8 Measurement of spectral response of a photovoltaic (PV) device (IEC 60904-8:1998) Photovoltaic devices: Part 9 Solar simulator performance requirments (IEC 60904-9:2007) Photovoltaic devices: Part 10 Methods of linearity measurment (IEC 60904-10:1998)
** INDICATES STANDARDS TO BE REVISED | INDICATES EQUIVALENT STANDARDS 85
DOC.ETD 28(6015)
DOC.ETD 28(6017)
DOC.ETD 28(6019)
5 6
7 8 9
Photovoltaic systems - Power conditioners Procedure for measuring efficiency (IEC 61683:1999) Salt mist corrosion testing of photovoltaic (PV) modules (IEC 61701:1995) Photovoltaic system performance monitoring Guidelines for measurment, data exchange and analysis (IEC 61724:1998) Analytical expression for daily solar profiles (IEC 61725:1997) Photovoltaic (PV) module safety qualification: Part 1 Requirments for construction (IEC 61730-1:2004) Photovoltaic (PV) module safety qualification: Part 2 Requirments for testing (IEC 61730-2:2004) Crystalline silicon photovoltaic (PV) array - On site measurment of I-V characteristics (IEC 61829-1:1995)
10 11
12 13
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION 1 DOC.ETD 28(6016) Solar photovoltaic energy systems - Terms, definitions and symbols (first revision of IS 12834) (IEC/TS 61836:2007) Photovoltaic devices: Part 7 Computation of spectral mismatch error introduced in the testing of a photovoltaic device (IEC 60904-7:2008) Thin-film terrestrial photovoltaic (PV) modules Design qualification and type approval (IEC 61646:2008) Photovoltaic (PV) systems - Characteristics of the utility interface (IEC 61727:2004)
DOC.ETD 28(6018)
DOC.ETD 28(6025)
DOC.ETD 28(6031)
ETD 29 POWER CAPACITORS SCOPE - To prepare standards for power capacitors such as series and shunt capacitors for power systems, self-healing and non-self-healing power capacitors with metallized dielectric, ac motor capacitors,capacitors for inductive heating plants,voltage grading capacitors,coupling capacitors,energy storage capacitors etc. NOTE - The standards for capacitors used in electronic circuits are excluded
Sl. No. IS Number/ DOC Number Title Reaffirm Date Am
STANDARDS PUBLISHED 1 2 3 4 5 IS 1709:1984 | IEC 252(1975) IS 2993:1998 / IEC 60252(1993) IS 9251:1979 | IEC 60110(1973) IS 9348:1998 / IEC 60358(1990) IS 9835(Part 1):2001 / IEC 60143-1(1992) Capacitors for electric fan motors (first revision) A.C. motor capacitors (second revision) Capacitors for inductive heat generating plants operating at frequencies between 40 and 24 000 Hz Coupling capacitor and capacitor dividers Series capacitors for power systems: Part 1 General performance testing and ratingSafety requirements - guide for installation (first revision) Voltage grading capacitor Capacitors for surge protection for use in voltage system above 650 V and upto 33 kV Internal fuses and internal overpressure disconnectors for shunt capacitors Internal fuses for series capacitors Internal fuses and internal overpressure disconnectors for capacitors for inductive heat generating plants Method for verifying accuracy of tan-delta measuremnts Shunt capacitors for the self-healing type for ac power systems having rated voltage upto and including 650 V Requirements for ageing test, self-healing test and destruction test on shunt capacitors of the self-healing type for ac power systems having a rated voltage upto and including 650 V Internal fuses and internal overpressure disconnectors for power electronic capacitors Mar 2006 Jul 2008 Mar 2006 Jul 2008 Jan 2006 1 2
6 7 8 9 10 11 12 13
IS 11530:1985 | IEC 60358 (1990) IS 11548:1986 IS 12672:1989 / IEC 60593(1977) IS 12677:1989 | IEC 60595(1977) IS 12730:1989 | IEC 60594(1977) IS 13203:1991 | IEC 60996(1989) IS 13340:1993 | IEC 60831-1(1988) IS 13341:1992 | IEC 60831-2(1988)
Mar 2006 Mar 2006 Mar 2006 Mar 2006 Mar 2006 Mar 2006 Apr 2008 Apr 2008 2 1 1
14
Apr 2008
15
Shunt capacitors of non- self- healing type for ac power systems having a rated voltage upto and including 650 V: Part 1 General Power electronics capacitors Energy storage capacitors Shunt capacitors for ac power systems having a rated voltage above 1000 V : Part 1General performance, testing and rating safety requirements - Guide for installation and operation (superseding IS 2834:1986) Shunt capacitors for ac power systems having a rated voltage above 1000 V : Part 2 Endurance testing (first revision) Shunt capacitors for ac power systems having a rated voltage above 1000 V: Part 3 Protection of shunt capacitors and shunt capacitors banks. Industrial ac net- work affected by harmonicsapplication of filters and shunt capacitors Capacitors for microwave ovens: Part 1 General
Aug 2009
16 17 18
19
Mar 2007
20
Mar 2007
21 22
FINALISED DRAFTS UNDER PRINT 1 2 DOC.ETD 29(6197) DOC.ETD 29(6198) A,C motor capacitors - Part 2: Motor start capacitors (third revision of IS 2993) (IEC 60252-2-2003) Shunt capacitors for AC power systems having a rated voltage above1 000V - Part 1 General (first revision of IS 13925(Part 1) (IEC 60871-1:2005 Shunt capacitors for the self-healing type for ac power systems having rated voltage upto and including 1 000 V - Part 1 General performance, testing and rating - safety requirements - Guide for installation and operation (first revision of IS 13340 (Part 1) (IEC 60831-1:2002) A,C motor capacitors - Part 1 : General performance, testing and rating - Motor start capacitors safety requirements - Guide for installation and operation (third revision of IS 2993) (IEC 602521-2001) Shunt capacitors of the non-self-healing type for ac systems having a rated voltage upto and including 1 000 V - Part 1 General - performance, - Guide for installation and operation (first revision of IS 13585 (Part 1) (IEC 60931-1:1996) Series capacitors for power systmes - Part 3 : Internal fuses (IEC 60143-3:1998)
** INDICATES STANDARDS TO BE REVISED | INDICATES EQUIVALENT STANDARDS 88
DOC.ETD 29(6199)
DOC.ETD 29(6201)
DOC.ETD 29(6202)
DOC.EtD 29(6203)
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION 1 DOC.ETD 29(6224) #Error Shunt power capacitors of the non-self-healing type for A.C. systems having a rated voltage up to and including 1 000 V Part 3 internal fuses (IEC 609313:1996) Shunt power capacitors of the non-self-healing type for A.C. systems having a rated voltage up to and including 1 000 V Part Ageing test and destruction test(IEC 60931-2:1996) Shunt capacitors for AC power systems having a rated voltage above 1 000 V Part 4 internal fuses(IEC 60871-4:2005)
DOC.ETD 29(6225)
DOC.ETD 29(6226)
DRAFT STANDARDS FORMULATED 1 DOC.ETD 29(6200) Shunt capacitors for the self-healing type for ac power systems having rated voltage upto and including 1 000 V - Part 2 Ageing test,self-healing test and destruction test (first revision of IS 13340 (Part 2) (IEC 60831-2:1995)
ETD 30 SURGE ARRESTERS SCOPE - To prepare standards on surge arresters and their accessories, application guide for surge arrestors for different locations
Sl. No. IS Number/ DOC Number Title Reaffirm Date Am
STANDARDS PUBLISHED 1 * IS 3070(Part 3):1993 | IEC 60099-4(1991) IS 15086(Part 1):2001 / IEC 60099-1(1991) Lightning arresters for alternating current systems : Part 3 Metal oxide surge-arresters without gaps for ac systems Surge arresters: Part 1 Non-linear resistor type gapped surge arresters for a.c. systems [Superseding IS 3070(Part 1)] Surge arresters: Part 3 Artificial pollution testing of surge arresters Surge arresters : Part 5 Selection and application recommendations (Superseading IS 4004) Apr 2004
Jul 2006
3 4
DRAFT STANDARDS APPROVED FOR WIDE CIRCULATION 1 DOC.ETD 30(6260) Surge arresters:Part 4 Metal-oxide surge arresters without gaps for ac systems [revision of IS 3070 (Part 3):1993] (IEC 60079-4:2009)
ETD 31 POWER ELECTRONICS SCOPE - To prepare standards regarding equipment and their components for electronic power switching NOTE 1 - Components which are comprised within the scope include electronic devices NOTE 2- The scope does not include telecommunication apparatus other than convertors for power supplies to such apparatus, nor does it include power supplies for electrical measurement NOTE 3- The standards for inverters for photovoltaic energy systems are excluded NOTE 4- Converters for HVDC systems are excluded
Sl. No. IS Number/ DOC Number Title Reaffirm Date Am
STANDARDS PUBLISHED 1 2 3 4 5 6 7 8 9 IS 2511:1963 | IEC 60119(1960) IS 3136:1965 | IEC 60119(1960) IS 3895:1966 | IEC 60146(1963) IS 4540:1968 | IEC 60146(1963) IS 6619:1972 IS 7204(Part 1):1974 IS 7204(Part 2):1980 | IEC 60478-2(1975) IS 7204(Part 3):1980 | IEC 60478-3(1976) IS 7204(Part 4):1980 | IEC 60478-4(1976) IS 7788:1975 | IEC 60411(1973) IS 11260(Part 1):1985 | IEC 60686(1980) IS 11260(Part 2):1985 | IEC 60686 (1980) IS 13314:1992 Specification for Polycrystalline semiconductor rectifier stacks Specification for Polycrystalline semiconductor rectifier equipment Specification for Monocrystalline semiconductor rectifier cells and stacks Specification for Monocrystalline semiconductor rectifier assemblies and equipment Specification for Safety code for semiconductor rectifier equipment Specification for Stabilized power supplies dc output: Part 1 Terms and definitions . Specification for Stabilized power supplies dc output: Part 2 Rating and performance . Specification for Stabilized power supplies dc output: Part 3 Radio frequency interference tests Specification for Stabilized power supplies dc output: Part 4 Tests other than radio-frequency interference. Specification for Single-phase traction power converters Specification for Stabilized power supplies ac output: Part 1Ratings and performance . Specification for Stabilized power supplies ac output: Part 2 Tests Solid state invertors run from storage batteries Specification Mar 2006 Mar 2006 Mar 2006 Mar 2006 Mar 2006 Mar 2006 Mar 2006 Mar 2006 Mar 2006 2
10 11 12 13
14
IS 14256:1995 | IEC 61136-1(1992) IS 15199(Part 1):2002 / IEC 61287-1(1995) IS 15199(Part 2):2002 / IEC 61287-2(2001)
Rating specification for semiconductor power converters for adjustable speed electric drive systems - particularly for DC motor drives. Power convertors: installed on board railway rolling stock - Part 1 Characteristics and test methods Power convertors: installed on board railway rolling stock - Part 2 Additional technical information
Mar 2005
15 16
DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT 1 DOC.ETD 31(6125) Uninterruptibe power systems (UPS) : Part 1 General and safety requirements, Section 1 UPS used in operator access area Uninterruptible power systems (UPS) : Part 1 General and safety requirements, Section 2 General and safety requirements for UPS used in restricted access locations Uninterruptible power systems (UPS) : Part 2 electromagnetic compatibility (EMC) requirements Uninterruptible power systems (UPS) : Part 3 Method of specifying the performance and test requirements
DOC.ETD 31(6126)
DOC.ETD 31(6127)
DOC.ETD 31(6128)
DRAFT STANDARDS FORMULATED 1 DOC.ETD 31(5621) Uninterruptable power systems (UPS):Part 3 Methods of specifying the performance and test requirements .
ETD 32 ELECTRICAL APPLIANCES SCOPE - To prepare standards for electrical appliances for household and similar purpopses, including associated controls
Sl. No. IS Number/ DOC Number Title Reaffirm Date Am
STANDARDS PUBLISHED 1 2 3 4 5 6 SP 48 : 1991 SP 49 : 1991 SP 50 : 1991 SP 51 : 1991 IS 302(Part 1):2008 | IEC 60335-1(2006) IS 302(Part 2/Sec 2):1997 | IEC 60335-2-2(1993) IS 302(Part 2/Sec 3):2007 | IEC 60335-2-3(2002) IS 302(Part 2/Sec 4):1993 | IEC 60335-2-4(1984) * IS 302(Part 2/Sec 6):1993 | IEC 60335-2-6(1986) IS 302(Part 2/Sec 7):1994 | IEC 60335-2-7(1984) IS 302(Part 2/Sec 8):1994 | IEC 60335-2-8(1987) * IS 302(Part 2/Sec 9):1993 | IEC 60335-2-9(1986) IS 302(Part 2/Sec 11):1994 | IEC 60335-2-11(1976) IS 302(Part 2/Sec 12):1993 | IEC60335-2-12(1987) Guide for requirements and testing of electric irons Guide for requirements and testing of electric immersion water heaters Guide for requirements and testing of electric radiators Guide for requirements and testing of electric stoves Safety of household and similar electrical appliances: Part 1 General requirements (sixth revision) Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 2 Vacuum cleaners and water suction cleaning appliances Safety of household and similar electric appliances: Part 2 Particular requirements, Sec 3 Electric iron [first revision of IS 302 (Part 2/Sec 3)] Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 4 Spin extractors Safety of household and similar electrical appliances: Part 2 Particuar requirements, Section 6 Cooking ranges, cooking tables, ovens and similar appliances Mar 2009 1 Mar 2009 1 Mar 2009 Mar 2009 Mar 2009 Mar 2009
Mar 2009
10
Safety of household and similar electrical appliances: Mar 2009 Part 2 Particular requirements, Section 7 Domestic electric clothes washing machines Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 8 Electric shavers, hair clippers and similar appliances Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 9 Electric toasters, grills, roastors and similar appliances Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 11 Tumbler dryers Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 12 Warming plates and similar appliances Mar 2009
11
12
Mar 2009
13
Mar 2009
14
Mar 2009
15
IS 302(Part 2/Sec 13):1994 | IEC 60335-2-13(1987) * IS 302(Part 2/Sec 14):1994 | IEC 60335-2-14(1984) * IS 302(Part 2/Sec 15):1993 | IEC 60335-2-15(1986) * IS 302(Part 2/Sec 21):1992 | IEC 60335-2-21(1989)
Safety of household and similar electrical appliances :Part 2 particular requirements, Section 13 Frying pans, deep fat fryers and similar appliances Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 14 Electric kitchen machines Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 15 Appliances for heating liquids Safety of household and similar electrical appliances: Part 2 Particlar requirements, Section 21 Stationary storage type electric water heater Safety of household and similar elecrical appliances: Part 2 Particular requirements, Section 23 Appliances for skin and hair care Safety of household and similar electrical appliances:Part 2 Particular requirements Sec 24 Refrigerators, food freezers and ice makers Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 26 Clocks Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 30 Room heaters (first revision) Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 32 Massage appliances Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 35 Elecric instanteneous water heater Safety of household and similar electrical appliances: Part 2 Particular requirements, Sec 45 Electric heating tools Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 46 Electric steam cookers Safety of household and similar electrical appliances : Part 2 Particuilar requirements , Section 59 Insect killers Safety of household and similar electrical appliances Part 2 Particular requirements, Section 76 Electric fence energizers Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 201 Electric immersion water heaters (first revision)
** INDICATES STANDARDS TO BE REVISED | INDICATES EQUIVALENT STANDARDS 94
Mar 2009
16
Mar 2009
17
Mar 2009
18
Feb 2006
19
* IS 302(Part 2/Sec 23):1993 | IEC 60335-2-23(1986) IS 302(Part 2/Sec 24):1994 | IEC 60335-2-24(1992) IS 302(Part 2/Sec 25):1994 | IEC 60335-2-25(1988) IS 302(Part 2/Sec 26):1994 | IEC 60335-2-26(1994) IS 302(Part 2/Sec 30):2007 | IEC 60335-2-30(2002) IS 302(Part 2/Sec 32):1994 | IEC 60335-2-32(1993) * IS 302(Part 2/Sec 35):1993 | IEC 60335-2-35(1991) IS 302(Part 2/Sec 45):1994 | IEC 60335-2-45(1986) IS 302(Part 2/Sec 46):1993 | IEC 60335-2-46(1986) IS 302(Part 2/Sec 59):1999 | IEC 60335-2-59(1990) IS 302(Part 2/Sec 76):1999 | IEC 60335-2-76(1997) IS 302(Part 2/Sec 201):2008 | IEC 60335-2-74(2002)
Mar 2009
20
Mar 2009
21
Mar 2009
22 23
Mar 2009
24
Mar 2009
25
Mar 2009
26
Mar 2009
27
Mar 2009
28
Mar 2009
29
Mar 2009
30
31
Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 202 Electric stoves Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 203 Electric call bells and buzzers for indoor use Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 204 Electric water boilers Safety of household and similar electrical appliances: Part 2 Particular requirements, Sec 205 Steam irons Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 206 Electric coffee machines Safety of household and similar electrical appliances: Part 2 Particular requirements, Sec 207 Electric hot plates Safety of household and similar electrical appliances: Part 2 Part|cular requirements, Sec 208 Single walled baking ovens Safety of household and similar electrical appliance: Part 2 Particular requirements , Section 209 Portable low speed food grinding machines Safety of household and similar electrical appliances: Part 2 Particular requirements, Sec 80 Fans (Superseding IS 12155:1987) Electric hot plates (second revision) Electric irons (fourth revision) Electric kettles and jugs for household and similar use (fourth revision) Electric immersion water heaters (fourth revision) Electric radiators (third revision) Electric ceiling type fans and regulators (third revision) Electric table type fans and regulators (third revision) Electric soldering irons (second revision) Electric pedestal type fans and regulators (first revision)
** INDICATES STANDARDS TO BE REVISED | INDICATES EQUIVALENT STANDARDS 95
Mar 2009
32
Mar 2009
33
Mar 2009
34
Jul 2005
35
Mar 2009
36
Mar 2009
37
Mar 2009
38
Jul 2005
39
IS 302(Part 2/Sec 80):2003 | IEC 60335-2-80 IS 365:1983 | IEC 60302-2-6(1982) IS 366:1991 | IEC 60311(1988) IS 367:1993 | IEC 60530(1975) IS 368:1992 IS 369:1992 | IEC 60675 * IS 374:1979 * IS 555:1979 IS 959:1994 * IS 1169:1967
Sep 2008
40 41 42 43 44 45 46 47 48
Mar 2009 Apr 2008 Mar 2009 Mar 2009 Feb 2006 Sep 2005 Jul 2005 Mar 2009 Mar 2009
3 5
1 2 6 2
49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69
IS 1287:1993 | IEC 60442(1973) IS 1401:2008 / IEC 61032 : 1997 IS 1415:1966 IS 1416:1972 IS 2082:1993 | IEC 60379(1982) IS 2268:1994 IS 2312:1967 | IEC 60665(1981) IS 2994:1992 IS 2997:1964 IS 3017:1985 | IEC 60730(1982) IS 3412:1994 IS 3481:1966 IS 3588:1987 IS 3724:1966 * IS 3725:1966 IS 3963:1987 IS 4158:1985 IS 4159:2002 | IEC 60335-2-73(1994) IS 4165:1991 | IEC 60730(1982) IS 4250:1980 IS 4283:1981
Electric toasters (third revision) Protection of persons and equipment by enclosures Probes for verification (second revision) Electric hand lamps (revised) Safety transformers (first revision) Stationary storage type electric water heaters (third revision) Electric call bells and buzzers for indoor use (second revision) Propeller type ac ventilating fans (first revision) Electric stoves (second revision) Air circulator type electric fans and regulators Thermostats for use with electric water heaters (first revision) Electric water boilers (second revision) Electric portable lamp stands and brackets Electric axial flow fans (first revision) Cartridge type heating elements (non-embedded type) Resistance wires, tapes and strips for heating elements Roof extractor units (first revision) Solid embedded type electric heating elements (first revision) Mineral filled sheathed heating elements (third revision) Thermostats for general purpose electric ovens (first revision) Domestic Electric food mixers (liquidizers and grinders) (first revision) Hot air fans (first revision)
Mar 2009
Aug 2006 Aug 2006 Nov 2009 Mar 2009 Jul 2005 Mar 2009 Jul 2005 Aug 2006 Mar 2009 Mar 2009 Aug 2009 Aug 2006 Jan 2006 Aug 2009 Aug 2006 Mar 2007 Aug 2006 Dec 2009 Aug 2009
2 3 5
8 5
5 1 4 3 1 4 2 1 9 3
70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90
IS 4327:1967 IS 4894:1987 IS 5159:1969 IS 5161:1969 IS 5579:1985 IS 5790:1985 | IEC 60350 IS 6272:1987 IS 6290:1986 | IEC 60311(1970) IS 6365:1971 IS 6390(Part 2):1992 IS 6446:1986 IS 6680:1992 | IEC 60342-1 IS 7137:1973 IS 7154:1994 IS 7603:1975 IS 8506:1977 IS 8978:1992 IS 8985:1978 IS 10436:1983 | IEC 60335-2-13 IS 10975:1984 IS 11037:1984
Electric fans and regulators for use in ships Centrifugal fans (first revision) Mains-operated electric shavers Flexible electric heating pads for domestic use Neon testers (first revision) Domestic electric cooking ovens (first revision) Industrial cooling fans (man coolers) (first revision) Steam irons (first revision) Laboratory electric ovens Domestic electrical clothes washing machines: Part 2 Requirements for tumbler dryers Mica insulated heating elements (first revision) Railway carriage fans (first revision) Portable, hand held mains-operated electric massagers Mains-operated electric hair-dryers (first revision) Low speed food grinding machines Laboratory electric resistance furnaces Electric instantaneous water heaters (second revision) Single walled baking ovens Electric frying pans and deep fat fryers Electric gas lighters Electronic type fan regulators
Aug 2009 Aug 2009 Aug 2006 Aug 2006 Aug 2006 Sep 2009 Aug 2009 Aug 2006 Aug 2006 Mar 2009 Dec 2009 Aug 2009 Aug 2006 Mar 2009 Jul 2005 Aug 2006 Dec 2009 Aug 2006 Apr 2008 Aug 2006 Aug 2005
2 4 1 3 2 5 5
2 1 3
2 1 2 1 3
91 92 93 94 95 96 97 98 99 100
IS 11676:1995 | IEC 60705(1988) IS 11879:1986 IS 12289:1988 | IEC 60745-1 IS 13231:1991 IS 13368:1992 IS 13588:1993 / IEC 60817(1984) IS 13886:1993 | IEC 60730(1892) IS 14144:1994 | IEC 60661(1980) IS 14145:1994 IS 14155:1994 | IEC 60456(1974) IS 15644:2006 / IEC 62115(2003) IS 60730(Part 1):1999 / IEC 60730-1 : 1999
Microwave ovens for household and similar purposes Electric steam cookers Hand held electric engraving tools Warming plates Method of test for double inlet centrifugal fans (industrial type) Spring operated impact test apparatus and calibration Bimetallic thermostats and thermal cutouts for use with electric irons Electric coffee makers (Superseding IS 3514) Mains operated clocks (superseding IS 5160) Domestic electric clothes washing machines for domestic use [Superseding IS 6390(Part 1):1983 and IS 6390 (Part 3): 1992] Safety of electric toys Automatic electrical controls for household and similar use: Part 1 General requirements
Aug 2006 Aug 2006 Mar 2009 Aug 2006 Aug 2009 Mar 2009 Mar 2009 Mar 2009 Apr 2008 Mar 2009 1 2
101 102
FINALISED DRAFTS UNDER PRINT 1 DOC.ETD 32(5757) Safety of household and similar electric appliances: Part 2 Particular requirements, Sec 23 Appliances for skin or hair care (first revision) Safety of household and similar electric appliances: Part 2 Particular requirements, Sec 21 Stationary storage type electric water heaters (first revision) Safety of household and similar electric appliances: Part 2 Particular requirements, Sec 14 Electric kitchen machines (first revision) Safety of household and similar electric appliances: Part 2 Particular requirements, Sec 35 Electric instantaneous water heater (first revision) Safety of household and similar electric appliances: Part 2 Particular requirements, Sec 15 Appliances for Heating Liquids (first revision) Safety of household and similar electric appliances: Part 2 Particular requirements, Sec 31 Range hoods
DOC.ETD 32(5759)
DOC.ETD 32(5763)
DOC.ETD 32(5764)
DOC.ETD 32(5770)
DOC.ETD 32(5870)
DOC.ETD 32(5969)
Safety of household and similar electric appliances: Part 2 Particular requirements, Sec 7 Domestic electric clothes washing machines (first revision) Safety of household and similar electric appliances: Part 2 Particular requirements, Sec 6 Cooking ranges , hobs, ovens and similar appliances (first revision) Safety of household and similar electric appliances: Part 2 Particular requirements, Sec 9 Grills, toasters and similar portable cooking appliances (first revision)
DOC.ETD 32(5972)
DOC.ETD 32(5973)
DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT 1 DOC.ETD 32(5095) / IEC 60879 Electric ceiling type fans and regulators ( fourth revision of IS 374)
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION 1 2 3 DOC.ETD 32(5891) DOC.ETD 32(5892) DOC.ETD 32(5893) Propeller type ac ventilating fans - Specification (second revision of IS 2312) Specification for air circulator type electric fans regulators (first revision of IS 2997) Electric fans and regulators for use in ships- Spec ification (first revision of IS 4327)
DRAFT STANDARDS APPROVED FOR WIDE CIRCULATION 1 2 3 DOC.ETD 32(5432) DOC.ETD 32(5433) DOC.ETD 32(6130) Electric pedestal type fans and regulators (second revision of IS 1169) Electric table type fans and regulators (fourth revision of IS 555) Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens including Combination Microwave Ovens (first revision of IS 302-2-25)
DRAFT STANDARDS FORMULATED 1 2 DOC.ETD 32(5996) DOC.ETD 32(6116) Specification for Table wall, Pedestal type fans and Regulators Cartridge type heating elements (non-embedded type) - Specification (first revision of IS 3724)
ETD 33 WINDING WIRES SCOPE - To prepare standards for wires for electrical winding irrrespective of conductor material, shape or type of covering taking into account the needs in the fields of electrotechnology
Sl. No. IS Number/ DOC Number Title Reaffirm Date Am
STANDARDS PUBLISHED 1 2 3 4 IS 482:1981 IS 2069:1991 IS 4685(Part 1):1968 IS 5825:1993 / IEC 60172(1987) IS 6162(Part 1):1971 | IEC 60111 IS 6162(Part 2):1971 | IEC 60111 IS 6181:1971 IS 7391(Part 1):1974 | IEC 60182 IS 7391(Part 2):1974 IS 7404(Part 1):1991 IS 7576:1974 | IEC 60317-1 IS 8572:1993 IS 8783(Part 1):1995 IS 8783(Part 2):1995 IS 8783(Part 3):1995 IS 8783(Part 4/Sec 1):1995 Reels for covered round electrical winding wires (third revision) Drums for covered winding wires and strips for electrical purpose (second revision) Varnish bonded glass-fibre covered copper conductors: Part 1 Round wires Test procedure for the determination of the temperature index of enamelled winding wires (first revision) Paper covered aluminium conductors : Part 1 Round conductors Paper covered aluminium conductors:Part 2 Rectangular conductors Varnish bonded glass-fibre braided rectangular copper conductors Cotton covered copper conductors : Part 1 Round conductors Cotton covered copper conductors : Part 2 Rectangular conductors (superseeding IS:2068) Paper covered copper conductors : Part 1 Round conductors [superseeding IS:3454) (first revision) Bunched enamelled copper conductors with silk covering Paper covered flexible/stranded copper conductors for transformer leads (first revision) Winding wires for submersible motors Part 1: Conductor data (first revision) Winding wires for submersible motors Part 2: Materials for dielectric and jacket (first revision) Winding wires for submersible motors Part 3: Methods of tests (first revision) Winding wires for submersible motors Part 4: Specifications for individual wires, Section 1 HR PVC insulated wires (first revision) Feb 2010 Feb 2010 Feb 2010 Jun 2008 1
5 6 7 8 9 10 11 12 13 14 15 16
Jun 2008 Jun 2008 Jun 2008 Jun 2008 Jun 2008 Feb 2010 Jun 2008 Jun 2008 Feb 2010 Feb 2010 Feb 2010 Feb 2010
4 5 1 2
1 1 2 1
17
Winding wires for submersible motors Part 4: Specifications for individual wires,Section 2 Crosslinked polyethylene insulated and polyamide jacketed wires (first revision) Winding wires for submersible motors Part 4: Specifications for individual wires, Section 3 Polyester and polypropylene insulated winding wires (first revision) Tape wrapped rectangular and square copper wires with a temperature index of 220 Guide for evaluation of thermal endurance of varnish bonded glass-fibre covered rectangular copper conductors Taper barrelled delivery spools for covered round electrical winding wires Aromatic polyamide paper covered rectangular and square copper wires with temperature index 200 Enamelled and varnish bonded glass fibre covered round copper wires Tape wrapped round copper wires with temperature index of 220 Polyester tape wrapped, varnish bonded glass-fibre covered rectangular paper conductors Guide for evaluation of thermal endurance of enamelled and varnish bonded glass covered copper conductors Specifications for particular types of winding wires: Part 0 General requirements, Section 1 Enamelled round copper wire Specifications for particular types of winding wires: Part 0 General requirements, Section 2 Enamelled rectangular copper wire Specifications for particular typses of winding wires: Part 0 General requirements, Section 3 Enamelled round aluminium wire Specifications for particular types of winding wires: Part 0 General requirements, Section 4 Glass fibre wound bare or enamelled rectangular copper wire Specifications for particular types of winding wires: Part 0 General requirements, Section 5 glass fibre braided, bare or enamelled rectangular copper wire Specifications for particular types of winding wires: Part 1 Polyvinyl acetal enamelled round copper wire, class 105 [superseeds IS 4800(Part 4):1968] Specifications for particular types of winding wires Part 2: Solderable polyurethane enamlled round copper wire, class 130, with a bonding layer.
** INDICATES STANDARDS TO BE REVISED | INDICATES EQUIVALENT STANDARDS 101
Feb 2010
18
Feb 2010
19 20
IS 9148:1979 IS 9778:1981
1 1
21 22 23 24 25 26
Feb 2010 Feb 2010 Feb 2010 Feb 2010 Feb 2010 Aug 2008 1
27
* IS 13730(Part 0/Sec 1):1993 / IEC 60317-0-1 * IS 13730(Part 0/Sec 2):1993 / IEC 60317-0-2 * IS 13730(Part 0/Sec 3):1994
Jun 2008
28
Jun 2008
29
Feb 2010
30
* IS 13730(Part 0/Sec 4):1993 / IEC 60317-0-4 IS 13730(Part 0/Sec 5):2003 / IEC 60317-0-5(2000) IS 13730(Part 1):1993 / IEC 60317-1(1990) * IS 13730(Part 2):1996 / IEC 60317-2(1990)
Jun 2008
31
Mar 2008
32
Jun 2008
33
Dec 2006
34
Specifications for particular types of winding wires Part 3 polyester enamelled round copper wire, class 155 Specifications for particular types of winding wires: Part 4 Solderable polyurethane enamelled round copper wire, class 130 [Superseeds IS 4800(Part 6):1968] Specifications for particular types of winding wires : Part 6 Oleo-resinous enamelled round aluminium wire, Class 180 [Superseeds IS 4800(Part 7):1970] Specifications for particular types of winding wiresC Part 7 Polyimide enamelled round copper wire Class 220 [superseeds IS 4800(Part 11):1981] Specifications for particular types of winding wires: Part 8 polyesterimide enamelled round copper wire class 180 Specifications for particular types of winding wires :Part 09 Polyester enamelled round aluminium wire, Class 130 Specifications for particular types of winding wires: Part 13 Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, Class 200 Specifications for particular types of winding wires : Part 15 Polyesterimide enamelled round aluminium wire, Class 180 Specifications for particular types of winding wires: Part 16 Polyester enamelled rectangular copper wire, Class 155 Specifications for particular types of winding wires: Part 17 Polyvinyl acetal enamelled rectangular copper wire, Class 105 Specifications for particular types of winding wires: Part 20 Solderable polyurethane enamelled round copper wire, Class 155 Specifications for particular types of winding wires: Part 26 Polyamide-imide enamelled round copper wire, Class 200 Specifications for particular types of winding wires: Part 27 Paper covered rectangular copper wire Specifications for particular types of winding wires: Part 28 Polyesterimide enamelled rectangular copper wire, Class 180 Specifications for particular types of winding wires: Part 29 Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, Class 200
Dec 2006
35
Jun 2008
36
IS 13730(Part 6):1994
Feb 2010
37
IS 13730(Part 7):1993 / IEC 60317-7(1990) IS 13730(Part 8):1996 / IEC 60317-8(1990) IS 13730(Part 9):1994
Jun 2008
38
Dec 2008
39
Feb 2010
40
Jun 2008
41
IS 13730(Part 15):1994
Feb 2010
42
IS 13730(Part 16):1996 / IEC 60317-16 (1990) IS 13730(Part 17):1996 / IEC 60317-17 (1990) IS 13730(Part 20):1993 / IEC 60317-20(1990) IS 13730(Part 26):1996 / IEC 60317-26 (1990) IS 13730(Part 27):1996 / IEC 60317-27(1990) IS 13730(Part 28):1996 / IEC 60317-28(1990) IS 13730(Part 29):1996 / IEC 60317-29(1990)
Dec 2006
43
Dec 2006
44
Jun 2008
45
Jun 2008
46 47
48
Jun 2008
49
Specifications for particular types of winding wires: Part 31 Glass-fibre wound, polyester or polyesterimide varnish- treated, bare or enamelled rectangular copper wire, temperature index 180 Specifications for particular types of winding wires: Part 32 Glass-fibre wound, polyester or polyesterimide varnish-treated, bare or enamelled rectangular copper wire, temperature index 155 Specifications for particular types of winding wieres: Part 33 Glass-fibre wound, silicone varnish-treated bare or enamelled rectangular copper wire, temperature index 200 Specifications for particular types of winding wires: Part 34 Polyester enamelled round copper wire, Class 130 (first revision) Specifications for particular types of wires: Part 39 Glass-fibre braided polyester or polyesterimide varnish-treated, bare or enamelled rectrangular copper wire, temperature index 180 Specifications for particular types of wires: Part 43 Aromatic polyimide tape wrapped round copper wire, class 240 Specifications for particular types of wires: Part 44 Aromatic polyimide tape rapped rectangular copper wire, class 240 Specifications for particular type of winding wires : Part 45 Polyester enamelled round copper wire , class 130 Specifications for particular types of wires: Part 48 Glass fibre wound resin or varnish impregnated bare or enamelled round copper wire, temperature index 155 Specifications for particular types of wires: Part 49 Glass fibre wound resin or varnish impregnated bare or enamelled round copper wire, temperature index 180 Specifications for particular types of wires: Part 50 Glass fibre wound resin or varnish impregnated bare or enamelled round copper wire, temperature index 200 Specifications for particular types of wires: Part 53 Aromatic polyamide (aramid ) tape wrapped rectangular copper wire, temperature index 220 Methods of tests for winding wires: Part 1 General Methods of tests for winding wires: Part 2 Determination of dimensions Methods of tests for winding wires: Part 3 Mechanical properties
** INDICATES STANDARDS TO BE REVISED | INDICATES EQUIVALENT STANDARDS 103
Jun 2008
50
Jun 2008
51
Jun 2008
52
Feb 2010
53
Oct 2005
54
IS 13730(Part 43):2005 / IEC 60317-43:1997 IS 13730(Part 44):2005 / IEC 60317-44:1997 IS 13730(Part 45):1999
Oct 2005
55
Nov 2005
56
Mar 2009
57
Oct 2005
58
Oct 2005
59
Oct 2005
60
IS 13730(Part 53):2005 / IEC 60317-53:1999 IS 13778(Part 1):1993 / IEC 60851-1:1985 IS 13778(Part 2):1993 / IEC 60851-2:1985 * IS 13778(Part 3):1993 / IEC 60851-3(1985)
Oct 2005
61 62 63
64 65 66 67 68
IS 13778(Part 4):1994 / IEC 60851-4:1985 * IS 13778(Part 5):1993 / IEC 60851-5(1985) IS 13778(Part 6):1993 / IEC 60851-6:1985 IS 14841(Part 2/Sec 1):2000 / IEC 60264-2-1:1989 IS 14841(Part 2/Sec 2):2000 / IEC 60264-2-2:1990 IS 14841(Part 3/Sec 1):2000 / IEC 60264-3-1:1990 IS 14841(Part 3/Sec 2):2000 / IEC 60264-3-2:1990 IS 14841(Part 3/Sec 3):2000 / IEC 60264-3-3:1990 IS 14841(Part 3/Sec 4):2000 / IEC 60264-3-4:1999 IS 14841(Part 4/Sec 1):2000 / IEC 60264-4-1:1997
Methods of tests for winding wires: Part 4 Chemical properties Methods of tests for winding wires: Part 5 Electrical properties Methods of tests for winding wires: Part 6 Thermal properties Packaging of winding wires: Part 2 Cylindrical barrelled delivery spools Section 1 Basic dimensions Packaging of winding wires: Part 2 Cylindrical barrelled delivery spools, Section 2 Specification for returnable spools made from thermoplastic material Packaging of winding wires: Part 3 Taper barrelled delivery spools, Section 1 basic dimensions Packaging of winding wires: Part 3 Taper barrelled delivery spools, Section 2 Specification for returnable spools made from thermoplastic material Packaging of winding wires: Part 3 Taper barrelled delivery spools, Section 3 Specification for nonreturnable spools made from thermoplastic material Packaging of winding wires: Part 3 Taper barrelled delivery spools, Section 4 basic dimensions of containers for taper barrelled delivery spools Packaging of winding wires: Part 4 Methods of test, Section 1 Delivery spools made from thermoplastic material
Feb 2010 Jun 2008 Jun 2008 Feb 2010 Feb 2010
1 1
69 70
71
Feb 2010
72
Feb 2010
73
Feb 2010
FINALISED DRAFTS UNDER PRINT 1 2 DOC.ETD 33(6066) DOC.ETD 33(6067) Winding Wires Test methods Part 1: General (IEC 60851-1) Winding wires - Test methods Part 4: Chemical properties (IEC 60851-4) Winding wires - Test Methods Part 6: thermal Properties(IEC 60851-6) Winding wires - Test methods - Part 2: Determination of dimenions IEC 60851-2 Specification for particular types or winding wires Part 0-1: General requirement - Enamelled round copper wire IEC 60317-0-1 Specification for particular types of winding wires Part 0-2: requirements - Enamelled rectangular copper wire IEC 60317-0-2 Specification for particular types of winding wires part 0-4:General requirements- Glass- fibre wound resinn or varnish impregnated, bare r enamelled rectangular copper wire IEC 60317-0-4
3 4 5
DOC.ETD 33(6155)
DOC.ETD 33(6156)
DOC.ETD 33(6157)
Specifications for particular types of winding wires part 0-5: General requirments - Glass fibre braided, resin or varnish impregnated, bare or enamelled rectangular copper wire IEC 60317-0-5 Specifications for particulatar types of winding wires Part 0-6: General requirements Glass-fibre wound resin or varnish impregnated,bare or enamelled round copper wire IEC 60317-0-6 Specification for particulars types of winding wires Part 2: Solderable polyurethane enamelled round copper wire, class 130, with a bounding layer (first revision) [ IEC 60317-2:2000] Specification for particulars types of winding wires Part 3: Polyester enamelled round copper wire, class 155 (firstr revision) [IEC 60317-3:2004].
DOC.ETD 33(6168)
10
DOC.ETD 33(6215)
11
DOC.ETD 33(6216)
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION 1 DOC.ETD 33(6247) Specifications for particular types of winding wires Part 0-3: General requirements Enamelled round aluminium wire [First Revision of IS 13730 (Part 0/Sec 3):1994] IEC 60317-0-5:2008] Winding wires Test methods - Part 3: Mechanical properties [First Revision of IS 13778 (Part 3):1993] IEC 60851-3:2009] Winding wires Test methods - Part 5: Electrical properties [First Revision of IS 13778 (Part 5):1993] [IEC 60851-5:2008] Specifications for particular types of winding wires Part 12: Polyvinyl acetal enamelled round copper wire, class 120 [IEC 60317-12:2010]
DOC.ETD 33(6248)
DOC.ETD 33(6249)
DOC.ETD 33(6250)
ETD 34 INSTRUMENTS TRANSFORMERS SCOPE - To prepare standards and application guides for instrument transformers
Sl. No. IS Number/ DOC Number Title Reaffirm Date Am
STANDARDS PUBLISHED 1 2 3 4 IS 2705(Part 1):1992 | IEC 60185(1966) IS 2705(Part 2):1992 | IEC 60185(1966) IS 2705(Part 3):1992 | IEC 60185(1966) IS 2705(Part 4):1992 | IEC 60185(1966) IS 3156(Part 1):1992 | IEC 60186(1987) IS 3156(Part 2):1992 | IEC 60186(1987) IS 3156(Part 3):1992 | IEC 60186(1987) IS 3156(Part 4):1992 | IEC 60186(1987) IS 4146:1983 IS 4201:1983 IS 5547:1983 IS 6949:1973 IS 11322:1985 | IEC 44-4 (1980) Current transformers: Part 1 General requirements (second revision) Current transformers: Part 2 Measuring current transformers (second revision) Current transformers: Part 3 Protective current transformers (second revision) Current transformers: Part 4 Protective current transformers for special purpose applications (second revision) Voltage transformers: Part 1 General requirements (second revision) Voltage transformers: Part 2 Measuring voltage transformers (second revision) Voltage transformers: Part 3 Protective voltage transformers (second revision) Voltage transformers: Part 4 Capacitor voltage transformers (second revision) Application guide for voltage transformers (first revision) Application guide for current transformers (first revision) Application guide for capacitor voltage transformers (first revision) Summation current transformers Method for partial discharge measurement in instrument transformers Aug 2007 Aug 2007 Aug 2007 Aug 2007 1
5 6 7 8 9 10 11 12 13
Aug 2007 Aug 2007 Aug 2007 Aug 2007 Sep 2006 Sep 2006 Sep 2006 Sep 2006 Sep 2006
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION 1 2 DOC.ETD 34(6106) DOC.ETD 34(6107) Instrument transformers: Part 1 Current transformers Instrument transformers: Part 2 Inductive voltage transformers
ETD 35 POWER SYSTEM RELAYS SCOPE - To prepare standards for power systems relays including those incorporating solid state devices, also taking into account combination of relays and devices to form schemes for power systems including control equipment associated with that protection NOTE - Relays used in electronic equipment are excluded
Sl. No. IS Number/ DOC Number Title Reaffirm Date Am
STANDARDS PUBLISHED 1 2 IS 3231(Part 0):1986 IS 3231(Part 1/Sec 1):1986 Electrical relays for power system protection: Part 0 General introduction and list of parts (first revision) Electrical relays for power system protection: Part 1 General requirements, Section 1 Contact performance (first revision) Electrical relays for power system protection: Part 1 General requirements, Section 2 Insulation tests (first revision) Electrical relays for power system protection: Part 1 General requirements, Section 3 High frequency disturbance test for static relays (first revision) Electrical relays for power system protection: Part 2 Requirements for principal families, Section 1 All or nothing relays Electrical relays for power system protection: Part 2 Requirements for principal families, Section 2 General requirements for measuring relays Electrical relays for power system protection: Part 2 Requirements for principal families, Section 3 General requirements for thermal relays Electrical relays for power system protection: Part 3 Requirements for particular group of relays, Section 1 Non-specified time or independent specified time measuring relays Electrical relays for power system protection: Part 3 Requirements for particular group of relays, Section 2 Dependent specified time measuring relays Electrical relays for power system protection:Part 3 Requirements for particular group of relays, Section 3 Biased (percentage) differential relays Electrical relays for power system protection: Part 3 Requirements for particular group of relays, Section 4 Directional relays and power relays Electrical relays for power system Protection: Part 3 Requirements for particular group of relays, Section 5 Impedance measuring relays Gas operated relays Feb 2009 Sep 2006
Sep 2006
IS 3231(Part 1/Sec 3):1986 | IEC 255-4 (1976) IS 3231(Part 2/Sec 1):1987 | IEC 255-1-00 IS 3231(Part 2/Sec 2):1987
Sep 2006
Sep 2006
Sep 2006
IS 3231(Part 2/Sec 3):1987 | IEC 255-8 (1978) IS 3231(Part 3/Sec 1):1987 | IEC 255-3 (1971)
Sep 2006
Sep 2006
IS 3231(Part 3/Sec 2):1987 | IEC 255-4 (1976) IS 3231(Part 3/Sec 3):1987 | IEC 255-13(1980) IS 3231(Part 3/Sec 4):1987 | IEC 255-12 (1980) IS 3231(Part 3/Sec 5):1987 | IEC255-16 (1982) IS 3637:1966
Sep 2006
10
Sep 2006
11
Sep 2006
12
Sep 2006
13
Sep 2006
14 15 16 17
Application guide for gas operated relays Application guide for electrical relays for ac systems: Part 1 Overcurrent relays for feeders and transformers Application guide for electrical relays for ac systems: Part 2 Overcurrent relays for generators and motors Application guide for electrical relays for ac systems: Part 3 Phase unbalance relays including negative phase sequence relays Application guide for electrical relays for ac systems: Part 4 Thermal relays Application guide for electrical relays for ac systems: Part 5 Distance protection relays Application guide for electrical relays for ac systems: Part 6 Power relays Application guide for electrical relays for ac systems: Part 7 Frequency relays Application guide for electrical relays for ac systems: Part 8 Voltage relays Application guide for electrical relays for ac systems: Part 9 Relays for busbar protection Application guide for electrical relays for ac systems: Part 10 Relays for transverse differential protection Application guide for electrical relays for ac systems: Part 12 Differential relays for transformers Preferred panel cutout dimensions for electrical relays: Part 1 Flush mounting IDMTL relays Electrical timer relays for industrial purposes (Part 1) Pneumatic (First revision) Electrical timer relays for industrial purposes (Part 2) Motorized (first revision) Electrical timer relays for industrial purposes (Part 3) Electronic Static protective relays Electrical protective relays for use in siesmic areas Guide for maintenance and field testing of electrical relays Potential relays for capacitor start-capacitor run hermetic compressors Start relay and overload protector for resistance start induction run hermetic compressors
** INDICATES STANDARDS TO BE REVISED | INDICATES EQUIVALENT STANDARDS 108
18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34
IS 3842(Part 4):1966 IS 3842(Part 5):1968 IS 3842(Part 6):1972 IS 3842(Part 7):1972 IS 3842(Part 8):1976 IS 3842(Part 9):1977 IS 3842(Part 10):1976 IS 3842(Part 12):1976 IS 4483(Part 1):1968 IS 5834(Part 1):1994 IS 5834(Part 2):1993 IS 5834(Part 3):1981 IS 8686:1977 | IEC 255-4 IS 8714:1978 IS 9124:1979 IS 9994:1981 IS 10075:1981
Sep 2006 Sep 2006 Sep 2006 Sep 2006 Sep 2006 Sep 2006 Sep 2006 Sep 2006 Sep 2006 Feb 2009 Apr 2008 Feb 2009 Sep 2006 Sep 2006 Sep 2006 Sep 2006 Sep 2006
1 2
35 36 37 38 39
IS 12083(Part 1):1986 | IEC 255-0-20 (1974) IS 12083(Part 2):1986 | IEC 255-5 (1977) IS 14122:1994 | IEC 60034-11(1978) ISQC 160000 : 1988 / IECQC 60255-7:1978 ISQC 160000 : 1988 / IECQC 60255-10:1979 ISQC 160100 : 1988 / IECQC 160100:1983 ISQC 160101 : 1988 / IECQC 160101:1993
Electrical relays: Part 1 Contact performance Electrical relays: Part 2 Insulation tests Built in thermal protection for electric motors rated up to 660 V ac Electrical relays:Part 1 tests and measurement procedures for electromechanical all-or-nothing relays Electrical relays:Part 2 Applications of the IEC quality assessment systems for electronic components to allor-nothing relays Electrical relays, sectional specification: Electromechanical all-or-nothing relays of assessed quality Electrical relays, blank detail specification: electromechanical all-or-nothing relays of assessed quality, test schedules 1, 2 and 3
Sep 2006 Sep 2006 Sep 2006 Feb 2009 Feb 2009
40
Feb 2009
41
Feb 2009
ETD 36 TOOLS AND EQUIPMENTS FOR LIVE WORKING SCOPE - To prepare standard on electrical and mechanical characteriistics as well as reliability requirements for tools and eqipment used in connections with work on energized electrical systems
Sl. No. IS Number/ DOC Number Title Reaffirm Date Am
STANDARDS PUBLISHED 1 2 3 4 5 6 7 8 9 IS 13770:1993 / IEC 60855:1985 IS 13771:1993 / IEC 60895:1987 IS 13772:1993 / IEC 60900:1989 IS 13773:1993 / IEC 60984:1990 IS 13774:1993 / IEC 60903:1988 IS 13961:1994 / IEC 60832:1988 IS 14956:2001 / IEC 61472:1998 IS 14957:2001 / IEC 61057:1991 IS 14981:2001 / IEC 61219:1993 IS 14993:2001 / IEC 61236:1993 IS 14994:2001 / IEC 61318:1994 IS 15405(Part 1):2003 / IEC 61482-1:2002 IS 15407:2003 / IEC 61278:1997 IS 15416:2003 / IEC 60743:2001 Insulating foam-filled tubes and solid rods for live working Conductive clothing for live working at nominal voltage up to 800 kV ac Hand tools for live working up to 1000 V ac and 1500 V dc Sleeves of insulating material for live working Specification for gloves and mitts of insulating materials for live working Insulating poles (insulating sticks) and universal tool attachments (fittings) for live working Live working - Minimum approach distances - method of calculation Aerial devices with insulating boom used for live working Live working - Earthing or earthing and short-circuiting equipment using lances as a short-circuiting device lance earthing Saddles, pole clamps (stick clamps) and accessories for live working Live working - Guidelines for quality assurance plans Live Working - flame resistance materials for clothing for thermal protection of working thermal hazards of an electric arc Part 1 Test Methods Live working - Guidelines for dielectric testing of tools and equipment Live working - Terminology for tools equipments and devices (Superceding IS 13985) Dec 2009 Dec 2009 Dec 2009 Dec 2009 Dec 2009 Dec 2009 Jun 2006 Jun 2006 Jun 2006 1
10 11 12
13 14
ETD 37 CONDUCTORS AND ACCESSORIES FOR OVERHEAD LINES SCOPE - To prepare standards for conductors and accessories for overhead power lines and codes of practice for the design, installation and maintainance or overhead power lines
Sl. No. IS Number/ DOC Number Title Reaffirm Date Am
STANDARDS PUBLISHED 1 IS 398(Part 1):1996 | IEC 889 IS 398(Part 2):1996 | IEC 889 (1987) IS 398(Part 3):1976 Aluminium conductors for overhead transmission purposes: Part 1 Aluminium stranded conductors (third revision) Aluminium conductors for overhead transmission purposes: Part 2 Aluminium conductors, galvanized steel reinforced (third revision) Aluminium conductors for overhead transmission purposes: Part 3 Aluminium conductors, aluminized steel reinforced (second revision) Aluminium conductors for overhead transmission purposes: Part 4 Aluminium alloy stranded conductors (aluminium magnesium silicon type) (third revision) Aluminium conductors for overhead transmission purposes: Part 5 Aluminium conductors, galvanized steel reinforced for extra high voltage (400 kV and above) (first revision) Reels and drums for bare conductors (first revision) (superseding IS:2889) Conductors and earth wire accessories for overhead power lines: Part 1 Armour rods, binding wires and tapes for conductors (first revision) Conductors and earth wire accessories for overhead power lines: Part 2 Mid span joints and repair sleeves for conductors (first revision) Conductors and earthwire accessories for overhead power lines: Part 3 Accessories for earthwire (first revision) Conductors and earth wire accessories for overhead power lines : Part 4 Non-tension joints (first revision) Hard-drawn copper wire for telegraph and telephone purposes Cadmium-copper wire for telegraph and telephone purposes Cadmium-copper conductors for overhead railway traction Trolley and contact wire for electric traction (first revision) Sep 2007 1
Sep 2007
Jul 2009
Jul 2009
Sep 2007
6 7
IS 2121(Part 2):1981
Sep 2007
IS 2121(Part 3):1992
Sep 2007
10 11 12 13 14
Sep 2007 Sep 2007 Sep 2007 Sep 2007 Jul 2009 4 1
15
Code of practice for design, installation and maintenance of overhead power lines: Part 1 Lines upto and including 11 kV, Section 1 Design (first revision) Code of practice for design, installation and maintenance of overhead power lines: Part 1 Lines upto and including 11 kV, Section 2 Installation and maintenance (first revision) Code of practice for design, installation and maintenance of overhead power lines: Part 2 Lines above 11 kV and upto and including 220 kV, Section 1 Design (first revision) Code of practice for design, installation and maintenance of overhead power lines: Part 2 Lines above 11 kV and upto and including 220 kV, Section 2 Installation and maintenance (first revision) Code of practice for design, installation and maintenance of overhead power lines: Part 3 400 kV lines, Section 1 Design Code of practice for design, installation and maintenance of overhead power lines: Part 3 400 kV lines, Section 2 Installation and maintenance Earth knobs for neutral conductors Stockbridge vibration dampers for overhead power lines (first revision) Spacers and spacer dampers for twin horizontal bundle conductors Helically formed fittings for overhead lines upto 33 kV Annealed stranded copper conductors for electric traction
Sep 2007
16
Sep 2007
17
Sep 2007
18
Sep 2007
19
Jul 2009
20
Jul 2009
21 22 23 24 25
Jul 2009 Mar 2009 Sep 2007 Sep 2007 Jul 2009 1
FINALISED DRAFTS UNDER PRINT 1 DOC.ETD 37(5817) Specification for Steel Reels and Drums for Bare Conductor
ETD 39 FUSES SCOPE - To prepare standards regarding specification for all types of fuses, with the object of determining : a) The characteristics which are essential in specifying the conditions for installation and operation of the fuses b) The requirements to be met by the fuses and the tests designed to ascertain their compliance with such requirements as well as the procedures to be followed for these tests c) Markings To prepare for these fuses standards, standard values of: 1) Characteristics, rated voltages, currents and breaking capacities: 2) Dimensions in connections with the fixing and interchangeability of high voltage and low voltage fuses
Sl. No. IS Number/ DOC Number Title Reaffirm Date Am
STANDARDS PUBLISHED 1 IS 2086:1993 Carriers and bases used in rewirable type electric fuses for voltages upto 650 V(third revision) (Superseding IS 8724) D-type fuses High voltage fuses:Part 1 Current limiting fuses High voltage fuses:Part 2 Expulsion and similar fuses (superseding IS:5792) High voltage fuses:Part 3 Application guide for high voltage fuses High voltage fuses:Part 4 Determination of shortcircuit power factor for testing of high voltage fuses High voltage fuses:Part 5 Types and dimensions of fuse-links for current limiting fuses High voltage fuses for the external protection of shunt power capacitors Fuse wires used in rewirable type electric fuses upto 650 volts High voltage fuse-links for motor circuit applications Application guide for the selection of high voltage fuses for transformer circuit applications Low voltage Fuses for voltages not exceeding 1000 V ac or 1500 V dc: Part 1 General requirements [superseding IS 9224 (Part 1):1979] Low voltage fuses for voltages not exceeding 1000 V ac or 1500 V dc: Part 2 Fuses for use by authorized persons, Section 1 Supplementary requirements [superseding IS 9224 (Part 2):1979]
** INDICATES STANDARDS TO BE REVISED | INDICATES EQUIVALENT STANDARDS 113
Mar 2009
2 3 4 5 6
IS 8187:1976 | IEC 269-3(1973) IS 9385(Part 1):1979 | IEC 282-1(1979) IS 9385(Part 2):1980 | IEC 282-2(1970) IS 9385(Part 3):1980 | IEC 282-2(1970) IS 9385(Part 4):1983
Mar 2006 Sep 2007 Sep 2007 Sep 2007 Sep 2007
7 8 9 10 11 12
IS 9385(Part 5):1983 | IEC 282-1A(1978) IS 9402:1980 | IEC 549(1976) IS 9926:1981 IS 10624:1983 | IEC 644(1979) IS 12534:1988 IS 13703(Part 1):1993 / IEC 60269-1(1986) IS 13703(Part 2/Sec 1):1993 / IEC 60269-2(1986)
Mar 2006 Sep 2007 Mar 2006 Mar 2006 Sep 2007 Mar 2009
13
Mar 2009
14
Low voltage fuses for voltages not exceeding 1000 V ac or 1500 V dc: Part 2 Fuses for use by authorized persons, Section 2 Examples of standardized fuses Low voltage fuses for voltages not exceeding 1000 V ac or 1500 V dc: Part 4 Supplementary requirements for fuse- links for the protectlon of semiconductor devices [superceding IS 9224 (Part 4):1980] Ministure fuses : Part 2 Cartridge fuse links (First revision) Miniature fuses: Part 5 Guidelines for quality assessment of miniature fuse-links Miniature fuses: Part 6 Fuse holders for miniature cartridge fuse links Miniture fuses: Part 1 Definitions for miniature fuses and general requirements for miniature fuse links(first revision) Miniature fuses: Part 4 Universal modular fuse Link (UMF) Thermal links - requirements and application guide
Mar 2009
15
Mar 2009
16 17 18 19
IS 60127(Part 2):2003 / IEC 60127-2:2003 IS 60127(Part 5):1988 IS 60127(Part 6):1994 / IEC 60127-6:1994 IS 60127(Part 1):2006 / IEC 60127-1(2006)
Sep 2007
Sep 2007
20 21
Sep 2007
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION 1 2 3 DOC.ETD 39(6159) DOC.ETD 39(6160) DOC.ETD 39(6161) Thermal links - Requirements and application guide IEC 60691:2002 (Superseding IS/IEC 691:1993) Low voltage fuses - Part 1: General requirements IEC 60269-1:2006 (Superseding IS 13703(Part 1) :1993 Low voltage fuses : Part 2 Supplementary requirements for fuses for use by authorized (fuses mainly for industrial application) Examples of standardized systems of fuses A to I IEC 60269-2 : 2006 (Superseding IS 13703(Part 2/Sec2):1987 Low voltage fuses - Part 3: Supplementary requirements for fuse for use by unskilled persons (fuses mainly for household and similar applications) Example of standardized systems of fuses A to F IEC 60269-3:2006 High voltage fuses - Part 1: Current - limiting fuses IEC 60282-1:2005(Superseding IS 9385 ( Part 2) :1980 High - voltage fuses - Part 2: Expulsion fuses IEC 60282-2 : 2008 (Superseding IS 9385 (Part 2) ;1980
DOC.ETD 39(6162)
5 6
ETD 40 HVDC POWER SYSTEMS SCOPE - To prepare standards and guidelines on equipment and performance of high- voltage d.c(HVDC) Transmission Systems
Sl. No. IS Number/ DOC Number Title Reaffirm Date Am
STANDARDS PUBLISHED 1 2 3 4 5 6 7 8 IS 2165(Part 5):2005 / IEC 60071-5:2002 IS 14801:2000 / IEC 60633(1998) IS 14902(Part 1):2001 / IEC 60919-1(1988) IS 14902(Part 2):2001 / IEC 60919-2(1991) IS 14902(Part 3):2005 / IEC 60919-3:1999 IS 14911(Part 1):2001 / IE 60700-1(1998) IS 15597:2005 / IEC 61803:1999 IS 15617:2005 / IEC 61954:2003 Insulation coordination:Part 5 Procedures for highvoltage direct current (HVDC) converter stations Terminology for high voltage direct current ( HVDC ) transmission. Performance of high-voltage d.c (HVDC) systems : Part 1 Steady state conditions. Performance of high-voltage d.c (HVDC) systems : Part 2 Faults and switching. Performance of high -voltage direct current (HVDC) systems:Part 3 Dynamic conditions Thyristor valves for high-voltage direct current (HVDC) power transmission: Part 1 Electrial Testing Determination of power losses in high voltage direct current (HVDC) converter stations Power electronics for electrical transmission and distribution systems-Testing of thyristor valves for static var compensations Jan 2006 Jun 2005 Jan 2006 Jan 2006
ETD 42 WIND TURBINES SCOPE - To prepare Indian standards for wind turbines that convert wind energy into electrical energy. These standards address design requirements, engineering integrity, measurement techniques and test procedures. Their purpose is to provide a basis for design, quality assurance and certification. The standards are concerned with all subsystems of wind turbines, such as mechanical and internal electrical systems, support structures and control and protection systems. They are intended to be used together with appropriate Indian Stanfdards.
Sl. No. IS Number/ DOC Number Title Reaffirm Date Am
DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT 1 2 3 4 DOC.ETD 42(5985) DOC.ETD 42(5986) DOC.ETD 42(5987) DOC.ETD 42(5988) Electrotechnical vocabulary - Part 415: Wind turbine general systems Wind turbines - Part 2: Design requirements for small wind turbines Wind turbine generator systems - Part 13 Measurement of mechanical loads Wind turbine generator systems - Part 21 Measurement assessment power quality characteristics of grid connected wind turbines Wind turbine generator systems - Part 24 Lightning protection
DOC.ETD 42(5989)