Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Differential Pressure Gauge

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

123456789012345678901234567890121234567890123456789012345678901212345

filterinfo@mail.donaldson.com
GTS-europe@emea.donaldson.com
gts-asiapacific@donaldson.com.sg
www.donaldson.com
123456789012345678901234567890121234567890123456789012345678901212345
123456789012345678901234567890121234567890123456789012345678901212345
123456789012345678901234567890121234567890123456789012345678901212345
123456789012345678901234567890121234567890123456789012345678901212345
Differential Pressure Gauges & Switches
123456789012345678901234567890121234567890123456789012345678901212345
Part
Number

Number
on Unit

Comments

Explosion-Proof Differential Pressure Switches


ALL: Rated for Class 1, Groups A,B,C,D and Class 2, Groups E,F,G, and NEMA 7
Elec: 120-480 V, 60 Hz AC, Temp: 32 to 180F

Explosion-Proof
Differential Pressure
Switches

31455-01

1950-1

31455-02

1950-5

31455-03

1950-5

31455-04

1950-5

31455-11

1950-5

31455-05

1950-10

Formerly P135489

31455-06

1950-10

31455-07

1950-10

he 1950 differential pressure


switches are SPDT explosion
proof, rated for Class 1 Div 1&2,
Groups A,B,C,D and Class 2,
Groups E,F,G, and at NEMA 7.

Formerly: P135490

31455-09

1950-10

Typically used in: GDX, TTD, CFS,


GDS filtration systems.

31455-10

1950-10

31455-08

1950-10

Formerly P157873

P15-7760
1910-10-Gold
Low Temp Version

Preset: 1" H20


Settable: 0.4" - 1.6" H20
Preset: 2" H20
Settable: 1.4" - 5.5" H20
Preset: 3" H20
Settable: 1.4" - 5.5" H20
Preset: 4" H20
Settable: 1.4" - 5.5" H20
Preset: 2.5" H20
Settable: 1.4" - 5.5"
Preset: 5" H20
Settable: 3" - 11" H20
Preset: 6" H20
Settable: 3" - 11" H20
Preset: 7" H20
Settable: 3" - 11" H20
Preset: 8" H20
Settable: 3" - 11" H20
Preset: 9" H20
Settable: 3" - 11" H20
Preset: 10" H20
Settable: 3" - 11" H20
Preset: 8" H20
Settable: 3" - 11" H20
Temp: -40 - 140F

Settable Differential Pressure Switches


ALL: Elec: 120V, 60 Hz AC, Temp: 32 to 180F

P13-9378
P13-9379
53292-00

1910-0
1910-5
1910-10

Formerly P15-6628

Settable: 0.15"- 0.5" H20


Settable: 1.4"- 5.5" H20
Settable: 3"- 11" H20
Max Pressure: 45" H20

Differential Pressure Transmitters


ALL: Stainless steel flange. Pressure range: to 30" H20, except 81026.

Settable Differential
Pressure Switches

he 1910 differential pressure


switches are SPDT settable for
various upper limits of airflow
restriction, and are typically used to
alert the operator to filter condition
and alarm the operator in case of
shut-down conditions.

49699-01
49699-02

1151
1151-B2

49699-03
49699-05

1151-H1
1151-K6

81026-01

3051

Typically used in: GDX, TTD, CFS,


GDS filtration systems.

44

Replacement Filters and Spare Parts Catalog

Housing: low-copper alum.NEMA 4X


Housing: low-copper alum.NEMA 4X.
Incl. mounting bracket
Housing: 316 stainless steel. NEMA4X
Housing: 316 stainless steel. NEMA4X .
Incl. CSA certification.
Pressure Range: 0-0.5 to 0-25" H20
Housing: polymer-covered aluminum
CSA, CENELEC approved

Differential Pressure Transmitter

rovides a continuous analog signal to your


master control panel, usually connected to
remote instrument to provide continuous readings
of pressure. Available with NEMA 4X rating,
either stainless steel or low-copper housing. Flange
is stainless steel.

1-800-431-0555 USA (No & So America)


+32 16 38 39 40 Belgium (Europe, Africa, MiddleEast)
+65-6311-7373 Singapore (Asia-Pacific)
12345678901234567890123456789012123456789012345678901234567890121234
12345678901234567890123456789012123456789012345678901234567890121234
12345678901234567890123456789012123456789012345678901234567890121234
12345678901234567890123456789012123456789012345678901234567890121234
12345678901234567890123456789012123456789012345678901234567890121234
Differential Pressure Gauges & Switches
12345678901234567890123456789012123456789012345678901234567890121234

ressure gauges tell you when to


change filter elements in your
Donaldson Gas Turbine Filtration
System. As the filters do their job
and load up with dust and dirt, the
differential pressure (also called P
or pressure drop) across the filters
gradually increases. When the
upper limit of acceptability is
reached on the gauge, you know
it's time to change out the filter
elements.

Part
Number

Number
on Unit

Comments

Differential Pressure Combination Switch/Gauges


47835-01

A3008-RMR-LT

47835-02

A3008-RMR-LT

47835-03
P12-5584

A3008-RMR-LT

P12-5887

A3000

Formerly

Differential Pressure Gauges


25006

Scale: 0"-10" H20 (also shows mm H20)


Temp: -40 to 140F
Rating: 25 psig sustained
Scale: 0"-2" H20
Temp: 30 to 140F
Rating: 15 psig

2010

Formerly P139022

27381

Settable: 0"-8" H20,


Temp: -40 to 120F
Scales: inches H20 & mm H20
12" switch-to-gauge cable
Settable: 0"-8" H20,
Temp: -40 to 120F
Scales: inches H20 & milibar
12" switch-to-gauge cable
Settable: 0"-8" H20
Temp: -40 to 120F
Scales: inches H20 & kPa
12" switch-to-gauge cable
Settable: 0"-8" H20,
Temp: -40 to 120F
Scales: inches H20
16" switch-to-relay cable
24VDC (Does not inclu. relay pack)

2002

Pressure Gauge + Switch

his unit serves two functions: it


is both a differential pressure
gauge and a switch. (Although the
photo above shows the gauge &
switch physically connected, in most
Donaldson filtration systems, they
are physically separated and
connected by a cable, which is also
provided with the unit.) Pressure
gauge/switches are typically used in
Donaldson self-cleaning gas turbine
filtration systems to start and stop
the pulse-cleaning mechanism.
Typically used in: TTD & GDX
self-cleaning filtration systems.

Differential Pressure Gauge

his gauge measures the differential


pressure (also called P or
pressure drop) across two different
areas, usually the inlet/outlet of the
filters.
Typically used in: all Donaldson
gas turbine filtration systems &
inlet treatment systems

Replacement Filters and Spare Parts Catalog

45

You might also like