Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 1K views

    Truck Adblue Emulator For VOLVO INSTRUCTIONS

    Uploaded by

    obd2works
    AdBlue Emulator Box designed to disable AdBlue system used in trucks, buses and other heavy vehicles with EURO 4/5 exhaust emission rates AdBlue Emulator Box bypasses electronic module of the Adblue system on vehicle. Its very easy to fit AdBlue Emulator Box to any truck or bus equipped with AdBlue system and it will override AdBlue system instantly, it will stop the usage of AdBlue liquid. AdBlue Emulator Box disables AdBlue system electronics gently so there will be no power loss of the engine or any warnings on the dashboard and in diagnostic system. This device works without interfering to work of other electronic systems of the vehicle. AdBlue Emulator Box has a wide range of supported vehicle models and there is only one version of emulator for all supported trucks, just upload the necessary program to the AdBlue Emulator Box and you can install it on any supported truck. http://www.obd2works.com/truck-adblue-emulator-for-volvo-p-1586.html

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Truck Adblue Emulator For VOLVO INSTRUCTIONS

    Uploaded by

    obd2works
    1K views4 pages
    AdBlue Emulator Box designed to disable AdBlue system used in trucks, buses and other heavy vehicles with EURO 4/5 exhaust emission rates AdBlue Emulator Box bypasses electronic module of the Adblue system on vehicle. Its very easy to fit AdBlue Emulator Box to any truck or bus equipped with AdBlue system and it will override AdBlue system instantly, it will stop the usage of AdBlue liquid. AdBlue Emulator Box disables AdBlue system electronics gently so there will be no power loss of the engine or any warnings on the dashboard and in diagnostic system. This device works without interfering to work of other electronic systems of the vehicle. AdBlue Emulator Box has a wide range of supported vehicle models and there is only one version of emulator for all supported trucks, just upload the necessary program to the AdBlue Emulator Box and you can install it on any supported truck. http://www.obd2works.com/truck-adblue-emulator-for-volvo-p-1586.html

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    AdBlue Emulator Box designed to disable AdBlue system used in trucks, buses and other heavy vehicles with EURO 4/5 exhaust emission rates AdBlue Emulator Box bypasses electronic module of the Adblue system on vehicle. Its very easy to fit AdBlue Emulator Box to any truck or bus equipped with AdBlue system and it will override AdBlue system instantly, it will stop the usage of AdBlue liquid. AdBlue Emulator Box disables AdBlue system electronics gently so there will be no power loss of the engine or any warnings on the dashboard and in diagnostic system. This device works without interfering to work of other electronic systems of the vehicle. AdBlue Emulator Box has a wide range of supported vehicle models and there is only one version of emulator for all supported trucks, just upload the necessary program to the AdBlue Emulator Box and you can install it on any supported truck. http://www.obd2works.com/truck-adblue-emulator-for-volvo-p-1586.html

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    1K views4 pages

    Truck Adblue Emulator For VOLVO INSTRUCTIONS

    Uploaded by

    obd2works
    AdBlue Emulator Box designed to disable AdBlue system used in trucks, buses and other heavy vehicles with EURO 4/5 exhaust emission rates AdBlue Emulator Box bypasses electronic module of the Adblue system on vehicle. Its very easy to fit AdBlue Emulator Box to any truck or bus equipped with AdBlue system and it will override AdBlue system instantly, it will stop the usage of AdBlue liquid. AdBlue Emulator Box disables AdBlue system electronics gently so there will be no power loss of the engine or any warnings on the dashboard and in diagnostic system. This device works without interfering to work of other electronic systems of the vehicle. AdBlue Emulator Box has a wide range of supported vehicle models and there is only one version of emulator for all supported trucks, just upload the necessary program to the AdBlue Emulator Box and you can install it on any supported truck. http://www.obd2works.com/truck-adblue-emulator-for-volvo-p-1586.html

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4
    At a glance
    Powered by AI
    The key takeaways are that the minusblue module is used to disable the original AdBlue system on a Volvo truck. It connects to the vehicle via various wiring connections and uses software and LEDs to operate.

    The purpose of the minusblue module is to disable the original AdBlue system on a Volvo truck in order to bypass emissions requirements.

    The minusblue module connects to the vehicle via 5 conductors for power (+15V), ground, activation (+30V), CAN H and CAN L. It must be installed between the original AdBlue module and its power source.

    VOLVO MINUSBLUE INSTRUCTIONS -----------------------------SOFTWARE INSTALLATION ---------------------Install the software provided.

    NEW TRUCK SELECTION ---------------------1) The minusblue module MUST be blanked. Link link to blank (connection details) with jumper provided. 2) Connect USB lead to minusblue module and PC. 3) When green led pulses disconnect USB connection to PC. 4) Remove link to blank (connection details). 5) Connect USB connection to PC. 6) Run minusblue software. 7) Select truck and press start. 8) Yellow led should now be on. 9) If incorrect truck was selected, select truck and press start again. 10) Disconnect USB connection to PC and minusblue module. 11) The minusblue module is now set-up for the truck selected.

    TRUCK INSTALLATION ---------------------

    The connections details diagram and wire colours refer to VOLVO FH16 Year 2008, but the main procedure of the minusblue module does not vary. Before proceeding make sure no faulty codes are memorised in the original ECU, ADBLUE liquid is higher than the reserve level and the truck batteries Are disconnected from the system.

    w w w

    d b .o

    s k r o 2w

    m o .c

    WIRING --------5 conductors:1) RED(+15). To be connected to a 24V source enabled when the engine key Is in the ON position. This connection will supply power to the minusble Module when the engine key is on(dashboard on). 2) BLACK(0V). To be connected to an earth. 3) GREY(+30). To be connected to a 24V supply always available to the Existing adblue system (25A protection fuse and the adblue system). 4) WHITE(CAN H). To be connected to CAN H of the system. 5) BROWN(CAN L). To be connected to CAN L of the system. The connections must be made under the box of the connectors located on the chassis.

    ACTIVATION ----------The minusblue module and the original adblue module CANNOT both be activated at the same time, the GREY ACTIVATION WIRE(+30) is to enable the minusblue module working. It is important to connect the GREY ACTIVATION WIRE(+30) to a 24V source always available(battery), moreover, the soldering operation must be done between the 25A fuse and the existing adblue module. If you want to stop and exclude the original adblue module from working, all That needs to be done is to remove the 25A fuse before starting the engine. The minusblue module will automatically be activated. To re-instate the original adblue module, all that needs to be done is to reinstall 25A fuse before starting the engine. The minusblue module will automatically be de-activated. SELF LEARNING -------------When the minusblue module is fully connected to the electrical circuit of the original adblue module, and after identification of the 25A fuse controlling the power feeding to the original adblue module the truck batteries can be Re-connected. The minusblue module aquires the inputs from the CANBUS the first time the dashboard is turned on(key on but engine still off). 1) Make sure the 25A fuse is inserted. 2) Turn on the dashboard(key on) and verify that the yellow led is on. 3) After approx 1 minute the yellow led will turn off and the green led will Turn on. 4) Switch off the dashboard(key off). After this procedure the minusblue module will be activated whenever the dashboard is turned on(key on). The result will be:1) If the 25A fuse is installed the original adblue system will be working. Both yellow and green leds will be on. 2) If the 25A fuse is not installed the original adblue system will not be Be working and the minusblue module will be activated. Both yellow and Green led will be flashing. NOTE:- ALL THE OPERATIONS WITH THE 25A FUSE MUST BE DONE WITH THE DASHBOARD SWITCHED OFF(KEY OFF).

    w w w

    d b .o

    s k r o 2w

    m o .c

    LED FUNCTION ON - OFF ---------------------KEY OFF:- YELLOW OFF, GREEN OFF KEY ON:KEY ON:KEY ON:KEY ON:KEY ON:YELLOW OFF, GREEN OFF YELLOW ON, GREEN OFF NO POWER FEEDING. TRUCK NOT SELECTED. WAITING FOR SELF-LEARNING. LEARNING COMPLETED. DATA SAVED, MODULE NOT ACTIVATED. DATA SAVED, MODULE ACTIVATED

    YELLOW OFF, GREEN ON YELLOW ON, GREEN ON

    YELLOW PULSE, GREEN PULSE

    w w w

    d b .o

    s k r o 2w

    m o .c

    VOLVO CONNECTION DETAILS

    GREEN/RED

    24V UNDERKEY

    +15

    +30

    24V ALWAYS TO BATTERY

    PURPLE

    BLUE

    FUSE 25A

    RED/GREY 32

    MINUSBLUE MODULE

    GREY BROWN WHITE RED

    BLACK WHITE/BLACK EARTH

    21

    22

    LINK USB TO BLANK

    w w w

    d b .o

    CANH CANL +30 +15 0V

    s k r o 2w
    12

    m o .c
    31 H L

    30

    RED/GREY 33

    EXISTING ADBLUE ECU MODULE

    You might also like