Aiwa CSD Td10

CSD-TD10/TD30
SERVICE MANUAL
US Model
AEP Model
UK Model
E Model
Australian Model
Ver 1.0 2003. 07
CSD-TD10/TD30
Canadian Model
CSD-TD10
Photo: CSD-TD30
Model Name Using Similar Mechanism

CD
CD Mechanism Type
Section
Optical Pick-up Name
Model Name Using Similar Mechanism
TC
Section Tape Transport Mechanism Type
CSD-A300
KSM-213RDM
KSS-213R
NEW
MF-TD10
SPECIFICATIONS
Radio section
Frequency range, antenna
FM: 87.5 - 108.0 MHz Rod antenna
US, CND, E4 model:
AM: 530/531 - 1,710/1,602 kHz (10/9 kHz step)
Ferrite bar antenna
AEP, UK model:
AM: 531/530 - 1,602/1,610 kHz (9/10 kHz step)
Ferrite bar antenna
MX model:
AM: 530/531 - 1,710/1,610 kHz (10/9 kHz step)
Ferrite bar antenna
CD player section
Disc
Compact disc
Scanning method
Non-contact optical scanner (semiconductor laser)
Laser diode properties
Material: GaAlAs
Wavelength: = 780 nm
Emission duration: Continuous
Laser output: Less than 44.6 W
(This output is the value measured at a distance of
200 mm from the objective lens surface on the
optical pick-up block with 7 mm aperture.)
Deck section
Track format
4 tracks, 2 channels
Frequency range
Normal tape: 50 - 12,500 Hz (JEITA)
Recording system
AC bias
Erasing system
Magnet erase
Heads
Recording/playback head (1)
Erasure head (1)
General
Speaker
100 mm cone type (2)
Power output
AEP model:
3.4 W + 3.4 W (DIN MUSIC POWER)
2 W + 2 W (JEITA 8 ohms, T.H.D. 10% DC)
AEP, UK, E4, MX model:
1 W + 1 W (DIN 1% Rated Power)
Continued on next page
CD STEREO RADIO CASSETTE RECORDER

9-961-070-01
Sony Corporation
2003G04-1
2003. 07
Personal Audio Company

Published by Sony Engineering Corporation
CSD-TD10/TD30
Power requirements
DC 12 V using eight size C (R14) batteries
US, CND, MX model:
AC 120 V, 60 Hz
AEP, UK model:
AC 230 V, 50 Hz
E4 model:
AC 110 V - 120 V/220 - 240 V switchable, 50/60 Hz
Power consumption
US, CND model:
12 W
AEP, UK, E4, MX model:
13 W
Dimensions (W H D)
390 170 258.5 mm
(15 3/8 6 3/4 10 1/4 in.)
Weight (excluding batteries)
2.7 kg (5 lbs. 15 oz.)
Accessory
Remote control (1, CSD-TD30 only)
AC cord (1)
Specifications and external appearance are subject to
change without notice.
Abbreviation
CND : Canadian model
E4
: AC 110-120V/220-240V area in E model
MX : Mexican model
TW : Taiwan model
AUS : Australian model
SP
: Singapore model
KR
: Korean model
AEP, UK, E, AUS model

CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1
LASER
LASER
LASER
LASER
PRODUCT
PRODUKT
LAITE
APPARAT
This Compact Disc player is classified as a CLASS 1

LASER product.
The CLASS 1 LASER PRODUCT label is located on the
exterior.
CAUTION
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
Flexible Circuit Board Repairing
Keep the temperature of the soldering iron around 270C during
repairing.
Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
Be careful not to apply force on the conductor when soldering
or unsoldering.
Notes on Chip Component Replacement
Never reuse a disconnected chip component.
Notice that the minus side of a tantalum capacitor may be damaged by heat.
NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK
OR BASE UNIT
The laser diode in the optical pick-up block may suffer electrostatic
breakdown because of the potential difference generated by the
charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic breakdown and also use
the procedure in the printed matter which is included in the repair
parts.
The flexible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK
The laser beam on this model is concentrated so as to be focused on
the disc reflective surface by the objective lens in the optical pickup block. Therefore, when checking the laser diode emission,
observe from more than 30 cm away from the objective lens.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE
WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE
PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR
IN SUPPLEMENTS PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT

LA SCURIT!!
LES COMPOSANTS IDENTIFIS PAR UNE MARQUE 0 SUR LES
DIAGRAMMES SCHMATIQUES ET LA LISTE DES PICES SONT
CRITIQUES POUR LA SCURIT DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PICES SONY
DONT LES NUMROS SONT DONNS DANS CE MANUEL OU
DANS LES SUPPLMENTS PUBLIS PAR SONY.
CSD-TD10/TD30
TABLE OF CONTENTS
1. SERVICING NOTES ......................................................... 4
2. GENERAL ............................................................................ 5
3. DISASSEMBLY
3-1. CABI Rear Assy .................................................................. 7
3-2. CABI Top Assy ................................................................... 7
3-3. CD Block Assy .................................................................... 8
3-4. Main Board ......................................................................... 8
3-5. Tape Mechanism Deck ........................................................ 9
3-6. CASS Door Assy ................................................................. 9
3-7. Display Board ................................................................... 10
3-8. HRP001, HE001, Pinch Roller Arm Assy ......................... 10
3-9. Belt, M501 ........................................................................ 11
3-10. Optical Pick-up ................................................................. 11
4. MECHANICAL ADJUSTMENTS ............................... 12

5. ELECTRICAL ADJUSTMENTS
Tape Section .......................................................................... 13
Tuner Section ......................................................................... 14
CD Section ............................................................................ 15
6. DIAGRAMS
6-1. IC Pin Description ............................................................. 17
6-2. Block Diagram CD Section ......................................... 19
6-3. Block Diagram Tuner Section ..................................... 20
6-4. Block Diagram Tape Section ....................................... 21
6-5. Circuit Boards Location .................................................... 22
6-6. Printed Wiring Board Main Section ............................ 23
6-7. Schematic Diagram CD Section .................................. 24
6-8. Schematic Diagram Tuner Section .............................. 25
6-9. Schematic Diagram Tape Section ............................... 26
6-10. Printed Wiring Board TC Section ............................... 27
6-11. Printed Wiring Boards
Control, Power Supply Section .................................. 28
6-12. Schematic Diagram Control, Power Supply Section .. 29
6-13. IC Block Diagrams ............................................................ 30
7. EXPLODED VIEWS
7-1.
7-2.
7-3.
7-4.
7-5.
7-6.
7-7.
Main Board Section .......................................................... 32

Cabinet Front (1) Section .................................................. 33
Cabinet Front (2) Section .................................................. 34
Chassis CD Section ........................................................... 35
Cabinet Rear Section ......................................................... 36
Tape Mechanism Section .................................................. 37
CD Mechanism Section .................................................... 38
8. ELECTRICAL PARTS LIST ......................................... 39
On repairing CD section, playing a disc without the lid (CD), use

Chuck Plate Jig.
Code number of Chuck Plate Jig: X-4918-255-1
1) After the connection, remove solder shown in the right figure.
The equipment can be removed using the following procedure.
SET
3-1.
CABI REAR ASSY

(Page 7)
3-2.
CABI TOP ASSY

(Page 7)
3-4.
MAIN BOARD
(Page 8)
3-5.
TAPE MECHANISM DECK

(Page 9)
3-6.
CASS DOOR ASSY

(Page 9)
3-3.
3-10. OPTICAL PICK-UP

(Page 11)
3-7.
3-8.
CD BLOCK ASSY
(Page 8)
DISPLAY BOARD
(Page 10)
HRP001, HE001,
PINCH ROLLER ARM ASSY
(Page 10)
3-9.
BELT, M501
(Page 11)
Follow the disassembly procedure in the numerical order given.
two screws
(+BVTP 3 x 20)
knob RTRY VOL
two screws
(+BVTP 3 x 10)
cover (BATT)
CN851
CABI front assy
three screws
(+BVTP 3 x 20)
CABI rear assy
Removal the solder.

MAIN board
CABI top assy
two screws
(+BVTP 3 x 10)
CABI front assy

CN405
(flat type)
CN402
connector
MAIN board
CABI top assy
two claws
CD cover
two claws
two vibration proof rubbers
two vibration proof rubbers

two screws
(2.6 x 16)
CD block assy
two screws
(2.6 x 16)
MAIN board
CN801
screw
(+BVTP 3 x 10)
Removal the solder.

CN501
CABI front assy
two holders (PWB)

two screws
(+BVTP 2.6 x 10)
CN301
CN602
CN601
TC board
two screws
(+BVTP 2.6 x 10)
Removal the solder.
two screws
(+BVTP 2.6 x 10)
CABI front assy
two screws
(+BVTP 2.6 x 10)
tape mechanism deck
damper
CASS door assy
screw
(+BVTP 2.6 x 10)
CABI front assy
SPR T CASS
two screws
(+KTP 3 x 10)
two screws
(+KTP 3 x 10)
DISPLAY board
screw
(azimuth)
screw
(+B bind)
lug plate
HRP001 (REC play head)
azimuth spring
pinch roller arm assy
HE001
(elase head)
claw
claw
10
two screws
(motor coller)
motor bracket
RF belt
M501
(motor sub assy)
main belt
screw
(MB)
optical pick-up
sled shaft
claw
gear (A)
screw
(+PWB tapping (M2))
screw
(+PWB tapping (M2))
11
CSD-TD10/TD30
SECTION 4
MECHANICAL ADJUSTMENTS
PRECAUTION
1. Clean the following parts with a denatured-alcohol-moistened
swab :
record/playback head
pinch roller
erase head
rubber belts
capstan
idlers
2. Demagnetize the record/playback head with a head demagnetizer. (Do not bring the head magnetizer close to the erase head.)
3. Do not use a magnetized screwdriver for the adjustments.
4. The adjustments should be performed with the rated power
supply voltage (9V) unless otherwise noted.
Torque Measurement
Mode
Torque meter
Meter reading
FWD
CQ-102C
2.95 6.86 mN m
(30 70 g cm)
(0.42 0.97 oz inch)
FWD
Back Tension
CQ-102C
0.15 0.53 mN m
(1.5 5.5 g cm)
(0.021 0.076 oz inch)
FF
CQ-201B
more than 5.88 mN m

(more than 60 g cm)
(more than 0.83 oz inch)
REW
CQ-201B
more than 5.88 mN m

(more than 60 g cm)
(more than 0.83 oz inch)
Tape Tension Measurement

Mode
FWD
12
Tension meter
Meter Reading
CQ-403A
more than 100 g

(more than 3.53 oz)
CSD-TD10/TD30
SECTION 5
ELECTRICAL ADJUSTMENTS
TAPE SECTION
Tape Bias Frequency Adjustment
0 dB = 0.775 V
Standard Output Level

Output terminal
SPEAKER L-CH (SPK1)
load impedance
output signal level
8
0.25 V (10 dB)
FUNCTION button: TAPE

Mode: REC
frequency counter
test tape
WS-48A
(3 kHz, 0 dB)
Test Tape
set
Type
Signal
Used for
WS-48A
3 kHz, 0 dB
tape speed adjustment
TP (CN301 4pin)
Tape Speed Adjustment

TAPE BIAS FREQUENCY ADJUSTMENT
Mode: playback
digital frequency
counter
test tape
WS-48A
(3 kHz, 0 dB)
Adjust T301 so that frequency counter reading is 60 2 kHz.

T301
60 2 kHz
8
TP
set
T301
SPEAKER, L-CH (SPK1)
Tape Bias Frequency

Adjustment
CN301
Adjust so that the value on the digital frequency counter is

3,000 Hz.
TC Board (component Side)
Digital frequency counter

2,910 to 3,090 Hz
Adjust so that the frequency at the beginning and that at the end of
tape winding are between 2,940 to 3,060 Hz.
Tape speed adjustment

control inside motor
13
CSD-TD10/TD30
TUNER SECTION
FM FREQUENCY COVERAGE
ADJUSTMENT
FM Section
Frequency Display
Reading on Digital voltmeter
BAND button: FM
87.5 MHz
2.3 0.2 V
108 MHz
7.0 0.2 V
L108
<confirmation>
Adjustment Part
FM RF signal
generator
FM ROD ANT
0.01 F
FM TRACKING ADJUSTMENT
Adjust for a maximum reading on level meter.
set
75 kHz frequency
deviation by 1 kHz signal
output level : as low as possible
L102
88 MHz
<confirmation>
108 MHz
AM IF ADJUSTMENT

L106
AM Section
450 kHz
BAND button: AM
AM RF signal
generator
Put the lead-wire
antenna close to
the set.
AM FREQUENCY COVERAGE
ADJUSTMENT
Frequency Display
Reading on Digital voltmeter
530 kHz
1.0 0.2 V
1,602 kHz
6.7 0.2 V
L101
<confirmation>
Adjustment Part
30% amplitude
modulation by
400 Hz signal
AM TRACKING ADJUSTMENT
Connecting Level Meter (FM and AM)

level meter
(range: 0.55 V ac)
8
set
Speaker terminal
Connecting Digital Voltmeter (FM and AM)

digital
voltmeter
100 k
(VT)
Repeat the procedures in each adjustment several times, and the

frequency coverage and tracking adjustments should be finally
done by the trimmer capacitors.
14

L103
TC101
600 kHz
1,400 kHz
See page 15.
CSD-TD10/TD30
L103,TC101
AM TRACKING
ADJUSTMENT
L301
L102
FM TRACKING
ADJUSTMENT
MAIN board (component side)

L102
FM ANT
L106
AM IF
ADJUSTMENT
L106
TC101
L108
FM FREQUENCY
COVERAGE
ADJUTSTMENT
L101
L101
AM FREQUENCY
COVERAGE
ADJUTSTMENT
CN801
C103
TP(VT)
SPK2
SPK1
CD SECTION
CD section adjustments are done automatically in this set.
In case of operation check, confirm that focus bias.
FOCUS BIAS CHECK

1.
2.
3.
4.
Connect the oscilloscope between IC402 pin

and pin .
Insert the disc (YEDS-18). (Part No. : 3-702-101-01)
Press the
(CD) button.
Confirm that the oscilloscope waveform is as shown in the
figure below. (eye pattern)
A good eye pattern means that the diamond shape ( ) in the
center of the waveform can be clearly distinguished.
IC402 pin 16
IC402 pin 14
MAIN board (conductor side)
RF signal reference waveform (eye pattern)
When observing the eye pattern, set the oscilloscope for AC range
and raise vertical sensitivity.
15
CSD-TD10/TD30
MEMO
16
CSD-TD10/TD30
SECTION 6
DIAGRAMS
6-1. IC PIN DESCRIPTION
IC601 TC94A23F-704BH (SYSTEM CONTROL)
1 to 9
10
S1/OT5-S9/OT13
S10/OT14/ZDNET
O
O
LCD segment output: LCD601 1pin-9pin.

LCD segment output: LCD601 10pin.
11
12
S11/OT15/CLCK
S12/OT16/DATA
O
O

13
14
S13/OT17/SFSY
S14/OT18/LRCK
O
O

15
16
P8-0/S15/BCK
P8-1/S16/AOUT
O
O
Changed to the port that detects use/non-use of O-BEAT L: Use, H: Non-use.

Not connected.
17
18
P8-2/S17/MBOV
P8-3/S18/IPF
O
O
Connecting to VDD (+5V).

Not connected.
19
20
MVDD
MVSS
Controller power supply +5V.

Controller power supply GND.
21
22
P1-0
P1-1
I/O
I/O
CD door switch open/close detection: L input at close.

Function CD input.
23
24
P1-2
P1-3
I/O
I/O
Function TU input.
Function TAPE input.
25
26
P3-0
P3-1/ADin1
I/O
A/D-I
Not connected.
KEY input.
27
28
P3-2/ADin2
P3-3/ADin3
A/D-I
I/O
TUNER destination identification.

INSIDE LIMIT switch detection.
29
30
P4-0/ADin4/BUZR
P4-1/S12
I/O
I
Not connected.
Data input from TU IC (LC72131).
31
32
P4-2/SI0/SI1/SDA
P4-3/SCK/SCL
O
O
Data output to TU IC (LC72131).

Clock output to TU IC (LC72131).
33
34
P2-0/EMPH in
P2-1/HSO in
O
I/O
CE output to TU IC (LC72131).
Not connected.
35
36
P2-2/LRCK in
P2-3/DATA in
I/O
O
FM stereo status input: L input at stereo.

AM beat selector output When AC bias is used.
37
38
IN1/BCK in
TESTC
I
I
Not connected.
Not connected.
39
40
OT19/HSO
OT20/SPCK
O
O
Main mute output.

Not connected.
41
42
OT21/SPDA
OT22/COPS
O
O
TU ON control signal output.

CD ON control signal output.
43
44
DOUT
SBSY
O
O
DIGITAL OUT output. (Not used)

Subcode block output. (Not used)
45
46
SBOK
VDD
Subcode Q-data CRCC judgment result output. (Not used)

CD section digital system power supply: +5V.
47
48
VSS
P2VREF
CD section digital system GND.

PLL system-2 VREF terminal.
49
50
PDO
TMAX
Difference signal between EFM signal and PLCK signal is output.

TMAX detection result is output.
51
52
LPFN
LPFO
I
O
Inverted input to low-pass filter amplifier.

Low-pass filter amplifier output.
53
54
PVREF
VCOF
PLL system VREF terminal.

VCO filter.
55
56
AVSS
SLCO
Analog system GND.

DAC output for generating data slice level.
57
58
RFI
AVDD
RF signal input.
Analog system power supply: 5V.
59
RFCT
RFRP signal center level input.
CSD-TD10/TD30
60
RFZI
RFRP zero-cross input.
61
62
RFRP
FEI
I
I
RF ripple signal input.

Focus error signal input.
63
64
SBAD
TEI
I
I
Sub-beam add signal input.

Tracking error input.
65
66
TEZI
FOO
I
O
Tracking error zero-cross input.

Focus equalizer output.
67
68
TRO
VREF
Tracking equalizer output.

Analog reference power supply: +5V.
69
70
RFGC
TEBC
O
O
RF signal amplitude adjustment control signal output.

Tracking balance control signal output.
71
72
FMO
DMO
O
O
Focus equalizer output.

Disc equalizer output.
73
74
2VREF
SEL
Analog reference power supply: +5V.

APC circuit ON/OFF signal output.
75
76
VDD2
VSS2
CD section digital system power supply: +5V.

CD section digital system GND.
77
78
XVSS
XI
CD section crystal oscillator GND.

CD section crystal oscillator input. (16,934MHz)
79
80
XO
XVDD
CD section crystal oscillator output. (16,934MHz)

CD section crystal oscillator power supply: +5V.
81
82
DVSR
RO
R-channel DA converter GND.

R-channel data positive polarity output.
83
84
DVRR
DVDD
R-channel reference voltage: +5V.

DA converter power supply: +5V.
85
86
DVRL
LO
L-channel reference voltage: +5V.

L-channel data positive polarity output.
87
88
DVSL
TESTM
L-channel DA converter GND.

Test mode control input. (GND)
89
90
IN2/(VPP)
RST
I
I
Not connected.
Microprocessor reset input.
91
92
HOLD
INTR
I
I
Hold status detection: Entering Hold at L.

Remote control input.
93
94
MXO
MXI
O
I
Crystal oscillator terminal for controller. (75kHz)

Crystal oscillator terminal for controller. (75kHz)
95
96
MVSS
MVDD
Controller power supply: GND.

Controller power supply: +5V.
97
98
COM1/OT1
COM2/OT2
O
O
LCD common output: LCD601 15pin.

99
100
COM3/OT3
COM4/OT4
O
O

CSD-TD10/TD30
6-2. BLOCK DIAGRAM CD SECTION
MAIN BOARD (1/3)

IC402
CD RF AMP
OPTICAL
PICK-UP
KSS-213R
IC601 (1/2)
CPU & DSP
RFGC
CN405
5
VA
VB
FNI
SUM
AMP
VC
GAIN
CTL
RFGO
RFRP
DET
RFIS
RFRP
VD
FP
FEO
DIFF
AMP
TEB
3
8
3
8
VE
VF
TNI
BAL
CTL
SBAD
SUM
AMP
12 MD
10
10 LD
MDI
LDO
7
19
57 RFI
LO 86
CD L-CH
RO 82
R-CH
DISPLAY BOARD
A
CN601
18
61 RFRP
17
14
62 FEI
70 TEBC
COM1 87
I
I
COM4 100
0-3
S1 1
I
I
S14 14
4-11
TEO
LASER
DRIVE
DET
VRO
1-4
5-12
5-12
CN602
64 TEI
16
10
B
SW802
FUNCTION
VREF
2VREF
SEG0-7
SW602
>
LCD601
CN604
SW602
.
SEG8-13
INTR 92
12
COM1-4
1-6
12-17
63 SBAD
13
SW601
PLAY/PAUSE
RESET X
SW602
STOP/BAND x
CN603
1-4
1-6
TPI
VREF 2VROI
LASER
DRIVE
Q403
69 RFGC
ADINI 26
DIFF
AMP
12
20
T-B
TAPE12V
11
11
REMOTE
SENSOR
REM601
SKIP/
SERCH
SW602
REPEAT/MODE/
OSC
TD30
SW606
PROGRAM
S601
T-BASS
ON
STANDBY
LASER
DRIVE
OFF
RADIO
SW802C
74 SEL
CD8V-VCC
RA8V-VCC
IC401
MOTOR/COIL DRIVER
FOCUS
TRACKING
13
16
16
14
15
14
15
FOCUS+
FOCUS-
17
18
TRACKING
COIL
DRIVE
27
26
FOCUS
COIL
DRIVE
20
E4 MODEL
8V REG
Q361,362
8V-VCC
13
ST8W-VCC
CD
SW802A
66 FDO
8V REG
Q851,852
CD8V
M702
SLED
MOTOR
1
2
CN403
1
2
PT101
3
4
3
4
5
6
5
6
1
2
11
12
SLED
MOTOR
DRIVE
72 DMO
CD 5V
SW401
CD DOOR
LEVEL
CHECK
MICON5V
XI 78
5V REG
Q404
MXO 93
CD 8V
28 ADIN3
21 PI-0
MXI 94
HPOO2
AC ~
EXCEPT
E4 MODEL
5V REG
Q602
12V-VCC
BATTERY
12V (1.5Vx 8)
XO 79
6
CN402
CNH852
1
RESET
Q403
71 FMO
CN851
1
HOLD
Q803,804
HOLD 91
RST 90
SW1
INSIDE
LIMIT
12V
CDPS 42
SPINDLE
MOTOR
DRIVE
POWER BOARD
67 TDO
24
POWER SW
Q853,854
M701
SPINDLE
MOTOR
SW901
VOLTAGE
SELECTOR
220-240V
110-127V
TAPE12V
12V-VCC
X401
16.934MHz
X601
75Hz
Signal path
: CD
Abbreviation
E4 : AC 110-120 V/220-240 V area in E model
CSD-TD10/TD30
6-3. BLOCK DIAGRAM TUNER SECTION
(Page 21)
(Page 21)
20
20
CSD-TD10/TD30
6-4. BLOCK DIAGRAM TAPE SECTION
(Page 20)
(Page 19)
(Page 19)
21
21
(Page 20)
CSD-TD10/TD30
6-5. CIRCUIT BOARDS LOCATION
THIS NOTE IS COMMON FOR PRINTED WIRING

BOARDS AND SCHEMATIC DIAGRAMS.
(In addition to this, the necessary note is
printed in each block.)
500mV/div 0.5sec/div
Common Note on Schematic Diagrams:

All capacitors are in F unless otherwise noted. pF: F
50 WV or less are not indicated except for electrolytics
and tantalums.
All resistors are in and 1/4 W or less unless otherwise
specified.
: internal component.
: panel designation.
POWER board
MOTOR board
BATT (C) board
Waveforms (Mode: PLAY)

MAIN Board
BATT (A) board
Note:
The components identified by mark or dotted
line with mark are critical for safety.
Replace only with part
number specified.
BATT (B) board
Note:
Les composants identifis par
une marque
sont critiques
pour la scurit.
Ne les remplacer que par une
pice por tant le numro
spcifi.
: B+ Line.
: adjustment for repair.

Total current is measured with no cassette installed.
Power voltage is dc 9V and fed with regulated dc power
supply from battery terminal.
Voltages are taken with a VOM (Input impedance 10 M ).
Voltage variations may be noted due to normal production tolerances.
Waveforms are taken with a oscilloscope.
Voltage variations may be noted due to normal production tolerances.
Circled numbers refer to waveforms.
Signal path.
: FM
: AM
: PB
: REC
: CD
Abbreviation
CND : Canadian model.
E4
: AC 110-120V/220-240V area in E model.
MX
: Mexican model.
TW : Taiwan model.
AUS : Australian model.
SP
: Singapore model.
KR
: Korean model.
DISPLAY board
MAIN board
BATT (C) board
TC board
Common Note on Printed Wiring Boards:

: parts extracted from the component side.
: parts extracted from the conductor side.
: parts mounted on the conductor side.
: internal component.
: Pattern from the side which enables seeing.
Abbreviation
CND : Canadian model.
E4
: AC 110-120V/220-240V area in E model.
MX
: Mexican model.
TW : Taiwan model.
AUS : Australian model.
SP
: Singapore model.
KR
: Korean model.
22
22
0.850.2Vp-p
IC402
(RFGO)
Semiconductor Location (MAIN Board)

Ref. No.
D101
D102
D103
D106
D107
D108
D361
D362
D363
D604
D605
D606
D607
D608
D609
D610
D611
D808
D855
D856
Location
D-4
E-3
D-4
C-3
C-3
B-4
D-13
D-13
E-13
B-5
C-5
B-10
B-10
B-9
B-9
C-6
B-10
E-6
C-11
C-10
IC101
IC102
IC401
IC402
IC601
IC801
D-3
B-3
D-9
E-8
C-7
C-12
L401
C-9
Q101
Q102
B-4
B-4
Ref. No.
Q103
Q104
Q105
Q106
Q107
Q108
Q109
Q110
Q111
Q361
Q362
Q403
Q404
Q602
Q603
Q604
Q605
Q801
Q802
Q803
Q804
Q807
Q808
Q809
Q810
Q851
Q852
Q853
Q854
Location
B-4
C-2
C-2
C-2
C-3
E-4
C-4
C-4
C-2
E-13
D-13
E-9
E-10
B-11
B-9
B-9
B-9
D-11
D-11
F-11
F-11
E-12
D-12
E-12
E-12
C-11
C-11
D-10
E-10
ZD601
B-11
CSD-TD10/TD30
Refer to page 22 for Circuit Boards Location and Semiconductor Location.
6-6. PRINTED WIRING BOARD MAIN SECTION Refer to page 22 for Common Note on Printed Wiring Boards.
(Page 28)
(Page 28)
10
11
12
13
14
C
(Page 28)
(Page 27)
NOTE:
CXXX
RXXX
CXXX
RXXX
CXXX
LXXX
CXXX
CFXXX
RXXX
DXXX
LXXX
XXXX
I
CXXX
23
23
CSD-TD10/TD30
Refer to page 22 for Waveforms.
Refer to page 22 for Common Note on Schematic Diagrams.
6-7. SCHEMATIC DIAGRAM CD SECTION Refer to page 30 for IC Block Diagrams.
10
11
12
13
14
MAIN BOARD (1/3)
1
IC B/D
MAIN
BOARD
(3/3)
(Page 26)
IC401
L405
L406
US,CND,
E4,MX
MOTOR/COIL
DRIVER
OTHER
10H 10H
JW
Q602
3DA8050
+5V REG
15H
MTZJ-T-77-6.2B
JW
5.1
5.1
3.5
JW
6.8K
L401
JW
D611
D611
L401
IN4148 IN4148
JW
OTHER
JW
US,CND
0
3.9
3.6
R603
US,CND,MX : 2.2
OTHER : JW
OPTICAL
PICK-UP
KSS-213R
D
2
0.1
US,CND
MODEL
C846
TC94A23F-704BH(US,CND,E4,MX)
TC94A23F-705BH(AEP,UK,AUS,KR,SP,TW)
SYSTEM CONTROL
EXCEPT
E4,MX
MODEL
Q404
REGULATOR
C844
IC601
KTA1266GR
MAIN
BOARD
(3/3)
(Page 26)
R320 JW
MAIN
BOARD
(2/3)
(Page 25)
M701
C894
C468
M702
C 845
0.1
ISS133
EXCEPT
E4,MX
MODEL
CD 402
L404
4.7H
1.7
JW
IC B/D
SSP
R622
JW
JW
2.1
R656
R655
R654
C661
C662
C663
16
17
R652
R657
C660
C665
R658
C659
R653
11
09
10
R659
C658
08
R660
07
R661
C656
C657
06
05
R662
C654
C655
R663
04
R664
C653
03
02
R666
C651
R665
R667
C650
C652
01
00
1 2 3 4 5 6 7 8 9 10 11 12
IC601 TC94A23F-704BH
Pin.No.
CD PLAY
Pin.No.
CD PLAY
1
2
3
2.4 2.4 2.4
4
0
5
0
6
0
7
2.4
8
0
9
0
51 52 53 54 55 56 57 58 59
2.0 1.8 2.0 1.5 0 1.9 2.0 4.5 2
10
0
11
0
12
0
13
0
14
0
15
0
16 17 18
0 5.0 0
19
0
20
0
21 22 23
0 4.8 0
24
0
25
0
26
0
60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76
2 2.9 2.1 1.7 2.1 2.1 2.1 2.0 2.0 1.1 1.9 2.0 2.0 3.9 2.3 4.6 0
27 28 29
0 4.6 0
77
0
30
0
31
0
32
0
33
0
34
0
35
0
36
0
37
0
38
0
39 40 41 42 43 44 45 46 47 48 49 50
0 4.9 0 4.8 4.6 0.1 4.6 4.6 0 3.9 2.0 2
78 79 80 81 82 83 84 85 86 87
2 2.3 4.3 0 2.3 2.2 4.4 2.2 2.3 0
88
0
89 90 91 92 93 94 95 96 97 98 99 100
0 4.9 5.1 0 2.6 1.9 0 4.9 2.4 2.4 2.4 2.4
24
24
17
1 2 3 4 5 6 7 8 8 9 10 11
DISPLAY BOARD
CN603
DISPLAY BOARD
CN604
(Page 29)
Voltage and waveforms are dc with respect to ground
under no-signal (detuned) conditions.
no mark : CD PLAY
12
13
14
15
16
KTC3198GR
09
10
11
C847
0.1
EXCEPT
E4,MX
MODEL
00
01
02
03
04
05
06
07
08
L601
0H
R668
KTC3198GR
Q403
REGULATOR
C649
Q403
KTA1266GR
15
Q603,604
HOLD
12
Q605
RESET
13
3.9
1.9
2.3
3.5
0.3
4.6
EXCEPT
US,CND
MODEL
10K
R607
US,CND,
E4,MX
MODEL
MAIN
BOARD
(3/3)
(Page 26)
R606
IC402
C664
2.9
2.2
C604
330 10V
14
(Page 29)
CSD-TD10/TD30
25
25
10
11
12
13
14
CSD-TD10/TD30
Refer to page 22 for Common Note on Schematic Diagrams.
6-9. SCHEMATIC DIAGRAM TAPE SECTION Refer to page 31 for IC Block Diagrams.
10
11
12
13
14
1
3
5
(Page 24)
HRP001
HE001
C
(Page 29)
TC BOARD
no mark : PB
(
) : REC
(Page 24)
MAIN BOARD (3/3)

no mark : FM
26
26
CSD-TD10/TD30
Refer to page 22 for Circuit Boards Location.
6-10. PRINTED WIRING BOARD TC SECTION Refer to page 22 for Common Note on Printed Wiring Boards.
10
11
12
13
A
Semiconductor
Location
D
(Page 23)
27
27
Ref. No.
D302
D303
Location
D-10
D-10
IC301
C-5
Q301
Q302
Q303
D-10
C-10
E-11
CSD-TD10/TD30
Refer to page 22 for Circuit Boards Location.
6-11. PRINTED WIRING BOARDS CONTROL, POWER SUPPLY SECTION Refer to page 22 for Common Note on Printed Wiring Boards.
10
11
12
MAIN BOARD
CN601
POWER BOARD
1-688-126-
JW2
C601 RST
D601
D603
C602
C603
C606
B2
BATT-
C605
MAIN BOARD
CN602
R615
SW601
PRESET/u
11
S601
R621
JW3
REM601
JW1
LCD601
LIQUID CRYSTAL DISPLAY PANEL
D604
CN60
4
12
D602
C611
18
C604
CN603
11
CNH852
D605
AC2
AC1
TD30
DISPLAY BOARD
13
YEL
RED
BLK
C
MAIN
BOARD
CN851
B1
BATT+
B+
B-
R616
R620
PROGRAM
SW606
REPEAT/MODE
SW605
S601
T-BASS
R623
1-688-511-
11
TUNE
E4 MODEL
RED
R619
RED
.
SW604
BLK
R618
RED
>
SW603
RED
R617
BAND/x
SW602
SW901
AC VOLTAGE
AC220-240V
110-120V
PT001
HP002
AC ~
EXCEPT E4 MODEL
Semiconductor
Location
BATT (A) BOARD
BATT (B) BOARD
G
JW13
JW24
JW14
JW15
JW23
JW16
BAT-
H
BAT+
BATTERY
DC 12V
R14x8
I
1-688-127-
11
JW19
JW22
JW17
JW20
JW18
JW21
1-688-128-
11
RED
BLK
CSD-TD10/TD30
6-12. SCHEMATIC DIAGRAM CONTROL, POWER SUPPLY SECTION Refer to page 22 for Common Note on Schematic Diagrams.
(Page 24)
(Page 24)
C
(Page 26)

no mark : FM
29
29
CSD-TD10/TD30
6-13. IC BLOCK DIAGRAMS

IC401 MM1469XH
IC101 TA2111FN
IC402 TA2109F
IC102 LC72131D
30
30
The mechanical parts with no reference

number in the exploded views are not supplied.
Items marked * are not stocked since
they are seldom required for routine service.
Some delay should be anticipated
when ordering these items.
Abbreviation
E4 : AC 110-120V/220-240V area in E model
MX : Mexican model
TW : Taiwan model
SP : Singapore model
KR : Korean model
*
*
*
*
Color Indication of Appearance Parts

Example :
KNOB, BALANCE (WHITE) ... (RED)
Parts Color Cabinets Color
Accessories are given in the last of this parts list.
The components identified by

mark or dotted line with mark
are critical for safety.
Replace only with part number
specified.
Les composants identifis par une
marque sont critiques pour
la scurit.
Ne les remplacer que par une pice
portant le numro spcifi.
*
*

specified.

la scurit.

specified.
*
*

la scurit.
Due to standardization, replacements in

Items marked * are not stocked since
the parts list may be different from the
they are seldom required for routine service.
Some delay should be anticipated
parts specified in the diagrams or the
when ordering these items.
components used on the set.
-XX and -X mean standardized parts, so
SEMICONDUCTORS
In each case, u : , for example:
they may have some difference from the
uA.. : A.. uPA.. : PA..
original one.
RESISTORS
uPB.. : PB.. uPC.. : PC.. uPD.. : PD..
All resistors are in ohms.
CAPACITORS
METAL:Metal-film resistor.
uF : F
COILS
METAL OXIDE: Metal oxide-film resistor.
uH : H
F:nonflammable
Abbreviation
E4 : AC 110-120V/220-240V area in E model
TW : Taiwan model
MX : Mexican model
SP : Singapore model
KR : Korean model
Ref. No.
Part No.
Description
Remark
A-3683-547-A BATT (A) BOARD, COMPLETE

************************
A-3683-545-A BATT (B) BOARD, COMPLETE

************************
When indicating parts by reference

number, please include the board.
Description
Remark
A-3347-378-A MAIN BOARD, COMPLETE (US,CND)

A-3683-541-A MAIN BOARD, COMPLETE
(AEP,UK,AUS,KR,SP,TW)
A-3683-553-A MAIN BOARD, COMPLETE (E4,MX)
*********************
*
*
*
3-248-381-01
3-249-837-01
3-249-842-01
4-951-620-11
7-685-647-79
3-248-401-01 SPR T BATT A

*************************************************************
A-3683-543-A DISPLAY BOARD, COMPLETE (TD10)
A-3683-555-A DISPLAY BOARD, COMPLETE (TD30)
************************
*
*
Part No.

marque 0 sont critiques pour
la scurit.
SW606 1-786-050-21 SWITCH, KEYBOARD (PROGRAM)

*************************************************************
3-248-401-01 SPR T BATT A

*************************************************************
*
Ref. No.

mark 0 or dotted line with mark
0 are critical for safety.
specified.
HLDR (PWB)
PAPER, SHIELD
HOLDER (FERRITE-ROD ANTENNA)
SCREW (2.6X10), +BVTP
SCREW +BVTP 3X10 TYPE2 N-S
< CAPACITOR >
3-248-402-01 HLDR (LCD)

< CAPACITOR >
C611
1-126-965-91 ELECT
22uF
20%
50V
(TD30)
< LIQUID CRYSTAL DISPLAY >

LCD601 1-805-142-11 DISPLAY PANEL, LIQUID CRYSTAL
< RESISTOR >
C001
C102
C103
C104
C105
1-161-772-11
1-161-772-11
1-101-004-00
1-102-947-00
1-128-817-31
CERAMIC
CERAMIC
CERAMIC
CERAMIC
CERAMIC
0.1uF
0.1uF
0.01uF
10PF
470PF
C106
C107
C108
C109
C110
1-101-004-00
1-101-004-00
1-101-004-00
1-101-001-00
1-101-004-00
CERAMIC
CERAMIC
CERAMIC
CERAMIC
CERAMIC
0.01uF
0.01uF
0.01uF
0.001uF
0.01uF
10%
10%
5%
5%
25V
25V
50V
50V
50V
50V
50V
50V
50V
50V
R615
R616
R617
R618
R619
1-249-433-11
1-249-421-11
1-249-421-11
1-247-843-11
1-249-426-11
CARBON
CARBON
CARBON
CARBON
CARBON
22K
2.2K
2.2K
3.3K
5.6K
5%
5%
5%
5%
5%
1/4W
1/4W
1/4W
1/4W
1/4W
C111
C112
C113
C114
C115
1-102-945-00
1-101-004-00
1-128-817-21
1-101-004-00
1-101-004-00
CERAMIC
CERAMIC
CERAMIC
CERAMIC
CERAMIC
8PF
0.01uF
470PF
0.01uF
0.01uF
5%
50V
50V
50V
50V
50V
R620
R621
1-249-428-11 CARBON
1-249-420-11 CARBON
8.2K
1.8K
5%
5%
1/4W
1/4W
(TD30)
C117
C118
C119
C120
C121
1-102-951-00
1-102-936-00
1-102-112-00
1-161-772-11
1-161-772-11
CERAMIC
CERAMIC
CERAMIC
CERAMIC
CERAMIC
15PF
3PF
330PF
0.1uF
0.1uF
5%
0.25PF
10%
10%
10%
50V
50V
50V
25V
25V
C122
C123
C124
C125
C126
1-126-960-11
1-161-772-11
1-101-004-00
1-130-485-00
1-130-485-00
ELECT
CERAMIC
CERAMIC
MYLAR
MYLAR
1uF
0.1uF
0.01uF
0.015uF
0.015uF
20%
10%
5%
5%
50V
25V
50V
50V
50V
C127
C128
C129
C130
C131
1-126-957-11
1-126-957-11
1-102-962-00
1-102-958-00
1-102-960-00
ELECT
ELECT
CERAMIC
CERAMIC
CERAMIC
0.22uF
0.22uF
30PF
20PF
24PF
20%
20%
5%
5%
5%
50V
50V
50V
50V
50V
< IC >
REM601 6-600-092-01 IC RPM7138-V4 (IR) (TD30)
< SWITCH >
S601
SW601
SW602
SW603
SW604
1-786-483-11
1-786-050-21
1-786-050-21
1-786-050-21
1-786-050-21
SWITCH, SLIDE (T-BASS)

SWITCH, KEYBOARD (PRESET/u)
SWITCH, KEYBOARD (BAND/x)
SWITCH, KEYBOARD (TUNE +/>)
SWITCH, KEYBOARD (TUNE /.)
SW605
1-786-050-21 SWITCH, KEYBOARD (REPEAT/MODE)
0.5PF
Ref. No.
Part No.
Description
C132
C133
C134
C135
C137
1-101-001-00
1-101-004-00
1-101-001-00
1-101-004-00
1-161-772-11
CERAMIC
CERAMIC
CERAMIC
CERAMIC
CERAMIC
0.001uF
0.01uF
0.001uF
0.01uF
0.1uF
Remark
Part No.
Description
50V
50V
50V
50V
25V
C414
C415
C416
C417
C418
1-126-947-11
1-162-841-11
1-101-004-00
1-162-832-11
1-162-832-11
ELECT
CERAMIC
CERAMIC
CERAMIC
CERAMIC
47uF
0.015uF
0.01uF
0.0027uF
0.0027uF
10%
10%
16V
16V
50V
16V
16V
C138
C139
C140
C141
C142
1-102-106-00
1-101-004-00
1-102-937-00
1-101-004-00
1-126-924-11
CERAMIC
CERAMIC
CERAMIC
CERAMIC
ELECT
100PF
0.01uF
4PF
0.01uF
330uF
50V
50V
0.25PF 50V
50V
20%
10V
C419
C420
C421
C422
C423
1-162-837-11
1-101-006-00
1-101-006-00
1-102-107-00
1-102-107-00
CERAMIC
CERAMIC
CERAMIC
CERAMIC
CERAMIC
0.0068uF 10%
0.047uF
0.047uF
120PF
10%
120PF
10%
16V
50V
50V
50V
50V
C143
C144
C145
C146
C147
1-161-772-11
1-102-106-00
1-101-004-00
1-101-004-00
1-101-004-00
CERAMIC
CERAMIC
CERAMIC
CERAMIC
CERAMIC
0.1uF
100PF
0.01uF
0.01uF
0.01uF
10%
10%
25V
50V
50V
50V
50V
C424
C425
C426
C427
C428
1-101-006-00
1-101-006-00
1-102-951-00
1-102-951-00
1-101-004-00
CERAMIC
CERAMIC
CERAMIC
CERAMIC
CERAMIC
0.047uF
0.047uF
15PF
15PF
0.01uF
50V
50V
50V
50V
50V
C148
C149
C150
C151
C152
1-102-947-00
1-101-004-00
1-101-004-00
1-102-106-00
1-102-106-00
CERAMIC
CERAMIC
CERAMIC
CERAMIC
CERAMIC
10PF
0.01uF
0.01uF
100PF
100PF
5%
50V
50V
50V
50V
50V
C429
C430
C431
C432
C433
1-104-665-11
1-104-665-11
1-104-665-11
1-101-004-00
1-104-665-11
ELECT
ELECT
ELECT
CERAMIC
ELECT
100uF
100uF
100uF
0.01uF
100uF
20%
20%
20%
C155
C156
C157
C158
C159
1-102-960-00
1-102-960-00
1-101-004-00
1-101-004-00
1-101-004-00
CERAMIC
CERAMIC
CERAMIC
CERAMIC
CERAMIC
24PF
24PF
0.01uF
0.01uF
0.01uF
5%
5%
50V
50V
50V
50V
50V
C434
C435
1-104-665-11 ELECT
1-161-772-11 CERAMIC
100uF
0.1uF
20%
10%
C436
C438
C439
1-104-665-11 ELECT
1-104-665-11 ELECT
1-101-004-00 CERAMIC
100uF
100uF
0.01uF
20%
20%
C160
C162
C163
C164
C165
1-126-963-11
1-126-963-11
1-104-665-11
1-104-665-11
1-101-004-00
ELECT
ELECT
ELECT
ELECT
CERAMIC
4.7uF
4.7uF
100uF
100uF
0.01uF
20%
20%
20%
20%
C441
C442
C443
C444
C446
1-161-772-11
1-161-772-11
1-104-665-11
1-101-004-00
1-126-935-11
CERAMIC
CERAMIC
ELECT
CERAMIC
ELECT
0.1uF
0.1uF
100uF
0.01uF
470uF
10%
10%
20%
C166
C167
C171
C172
C173
1-101-004-00
1-101-004-00
1-126-924-11
1-126-924-11
1-102-936-00
CERAMIC
CERAMIC
ELECT
ELECT
CERAMIC
0.01uF
0.01uF
330uF
330uF
3PF
50V
50V
20%
10V
20%
10V
0.25PF 50V
C447
C452
C453
C454
C455
1-161-772-11
1-101-004-00
1-104-665-11
1-136-159-00
1-101-884-00
CERAMIC
CERAMIC
ELECT
MYLAR
CERAMIC
0.1uF
0.01uF
100uF
0.033uF
56PF
10%
C175
C176
C177
C178
C179
1-161-772-11
1-102-106-00
1-127-888-21
1-126-964-11
1-161-772-11
CERAMIC
CERAMIC
CERAMIC
ELECT
CERAMIC
0.1uF
100PF
0.1uF
10uF
0.1uF
10%
10%
10%
20%
10%
C460
C461
C462
C463
C464
1-161-772-11
1-101-004-00
1-101-004-00
1-136-161-00
1-136-161-00
CERAMIC
CERAMIC
CERAMIC
MYLAR
MYLAR
0.1uF
0.01uF
0.01uF
0.047uF
0.047uF
10%
C190
1-102-936-00 CERAMIC
3PF
C323
C324
C361
C362
1-126-960-11
1-126-960-11
1-126-934-11
1-126-933-11
ELECT
ELECT
ELECT
ELECT
1uF
1uF
220uF
100uF
0.25PF 50V
(US,CND,E4,MX)
20%
50V
20%
50V
20%
16V
20%
16V
C468
C601
C602
C603
C604
1-104-665-11
1-104-665-11
1-126-935-11
1-101-004-00
1-126-924-11
ELECT
ELECT
ELECT
CERAMIC
ELECT
100uF
100uF
470uF
0.01uF
330uF
20%
20%
20%
C401
C402
C403
C404
C405
1-161-772-11
1-161-772-11
1-126-963-11
1-126-963-11
1-101-004-00
CERAMIC
CERAMIC
ELECT
ELECT
CERAMIC
0.1uF
0.1uF
4.7uF
4.7uF
0.01uF
10%
10%
20%
20%
25V
25V
50V
50V
50V
C606
C607
C608
C609
C610
1-126-957-11
1-126-961-11
1-102-518-11
1-102-518-11
1-101-004-00
ELECT
ELECT
CERAMIC
CERAMIC
CERAMIC
0.22uF
2.2uF
33PF
33PF
0.01uF
20%
20%
5%
5%
50V
50V
50V
50V
50V
C406
C407
C408
C409
C410
1-102-114-00
1-102-114-00
1-126-947-11
1-101-004-00
1-126-947-11
CERAMIC
CERAMIC
ELECT
CERAMIC
ELECT
470PF
470PF
47uF
0.01uF
47uF
10%
10%
20%
50V
50V
16V
50V
16V
C612
C613
C614
C617
C619
1-161-772-11
1-161-772-11
1-161-772-11
1-101-004-00
1-104-665-11
CERAMIC
CERAMIC
CERAMIC
CERAMIC
ELECT
0.1uF
0.1uF
0.1uF
0.01uF
100uF
10%
10%
10%
20%
25V
25V
25V
50V
10V
C411
C413
1-102-852-91 CERAMIC
1-101-004-00 CERAMIC
47PF
0.01uF
5%
50V
50V
C620
C621
1-126-962-11 ELECT
1-161-772-11 CERAMIC
3.3uF
0.1uF
20%
10%
50V
25V
10%
10%
10%
10%
20%
50V
50V
10V
10V
50V
25V
50V
50V
50V
25V
Ref. No.
Remark
20%
10%
5%
5%
20%
20%
20%
10%
5%
10%
10%
20%
10V
10V
10V
50V
10V
10V
25V
(US,CND)
10V
10V
50V
25V
25V
10V
50V
10V
25V
50V
10V
50V
50V
25V
50V
50V
50V
50V
10V
10V
10V
50V
10V
Ref. No.
Part No.
Description
C622
C623
C624
C648
C649
1-161-772-11
1-127-888-21
1-127-888-21
1-102-114-00
1-102-114-00
CERAMIC
CERAMIC
CERAMIC
CERAMIC
CERAMIC
0.1uF
0.1uF
0.1uF
470PF
470PF
10%
10%
10%
10%
10%
Remark
25V
50V
50V
50V
50V
C650
C651
C652
C653
C654
1-102-114-00
1-102-114-00
1-102-114-00
1-102-114-00
1-102-114-00
CERAMIC
CERAMIC
CERAMIC
CERAMIC
CERAMIC
470PF
470PF
470PF
470PF
470PF
10%
10%
10%
10%
10%
50V
50V
50V
50V
50V
C655
C656
C657
C658
C659
1-102-114-00
1-102-114-00
1-102-114-00
1-102-114-00
1-102-114-00
CERAMIC
CERAMIC
CERAMIC
CERAMIC
CERAMIC
470PF
470PF
470PF
470PF
470PF
10%
10%
10%
10%
10%
50V
50V
50V
50V
50V
C660
C661
C662
C663
C664
1-102-114-00
1-102-114-00
1-102-114-00
1-102-114-00
1-102-114-00
CERAMIC
CERAMIC
CERAMIC
CERAMIC
CERAMIC
470PF
470PF
470PF
470PF
470PF
10%
10%
10%
10%
10%
50V
50V
50V
50V
50V
C665
C801
1-102-114-00 CERAMIC
1-130-471-00 MYLAR
470PF
0.001uF
10%
5%
C801
1-130-479-00 MYLAR
C802
1-130-471-00 MYLAR
C802
1-130-479-00 MYLAR
Ref. No.
Part No.
Description
Remark
C847
1-161-772-11 CERAMIC
0.1uF
C856
C857
C858
C872
1-126-960-11
1-126-767-11
1-126-943-11
1-126-933-11
1uF
1000uF
2200uF
100uF
10%
25V
(EXCEPT E4,MX)
20%
50V
20%
16V
20%
25V
20%
16V
C873
1-126-960-11 ELECT
1uF
20%
C874
1-126-960-11 ELECT
1uF
C875
1-130-483-00 MYLAR
0.01uF
C876
1-130-483-00 MYLAR
0.01uF
C877
1-130-490-11 MYLAR
0.039uF
C877
1-130-492-11 MYLAR
0.056uF
C878
1-130-490-11 MYLAR
0.039uF
C878
1-130-492-11 MYLAR
0.056uF
50V
50V
(E4,MX)
0.0047uF 5%
50V
(EXCEPT E4,MX)
0.001uF 5%
50V
(E4,MX)
0.0047uF 5%
50V
(EXCEPT E4,MX)
C885
1-126-960-11 ELECT
1uF
C886
1-126-960-11 ELECT
1uF
C889
C890
1-126-960-11 ELECT
1-126-960-11 ELECT
1uF
1uF
20%
20%
C891
1-126-960-11 ELECT
1uF
20%
C892
C893
1-161-772-11 CERAMIC
1-104-665-11 ELECT
0.1uF
100uF
10%
20%
50V
50V
(E4,MX)
50V
(E4,MX)
25V
10V
C894
C895
C896
C897
1-102-514-11
1-102-514-11
1-102-514-11
1-102-514-11
22PF
22PF
22PF
22PF
5%
5%
5%
5%
50V
50V
50V
50V
C805
1-126-956-11 ELECT
0.1uF
C805
1-126-959-11 ELECT
0.47uF
C806
1-126-956-11 ELECT
0.1uF
C806
1-126-959-11 ELECT
0.47uF
C807
1-102-114-00 CERAMIC
470PF
20%
50V
(EXCEPT E4,MX)
20%
50V
(E4,MX)
20%
50V
(EXCEPT E4,MX)
20%
50V
(E4,MX)
10%
50V
C808
C809
C810
C811
C812
1-102-114-00
1-104-663-11
1-104-663-11
1-104-665-11
1-104-665-11
CERAMIC
ELECT
ELECT
ELECT
ELECT
470PF
33uF
33uF
100uF
100uF
10%
20%
20%
20%
20%
50V
25V
25V
10V
10V
* CF101
CF102
CF103
C813
C814
C815
C817
C818
1-126-940-11
1-126-940-11
1-127-888-21
1-136-169-00
1-136-169-00
ELECT
ELECT
CERAMIC
FILM
FILM
330uF
330uF
0.1uF
0.22uF
0.22uF
20%
20%
10%
5%
5%
25V
25V
50V
50V
50V
* CN402
CN501
* CN601
* CN602
CN801
C819
C820
C821
C828
C840
1-126-934-11
1-126-942-61
1-126-961-11
1-128-551-11
1-161-772-11
ELECT
ELECT
ELECT
ELECT
CERAMIC
220uF
1000uF
2.2uF
22uF
0.1uF
20%
20%
20%
20%
10%
16V
25V
50V
25V
25V
CN851
C841
C844
C845
1-104-665-11 ELECT
1-101-001-00 CERAMIC
1-161-772-11 CERAMIC
100uF
0.001uF
0.1uF
20%
C846
1-161-772-11 CERAMIC
0.1uF
10V
50V
10%
25V
(EXCEPT E4,MX)
10%
25V
(EXCEPT E4,MX)
ELECT
ELECT
ELECT
ELECT
CERAMIC
CERAMIC
CERAMIC
CERAMIC
50V
(E4,MX)
20%
50V
(E4,MX)
5%
50V
(E4,MX)
5%
50V
(E4,MX)
5%
50V
(EXCEPT E4,MX)
5%
50V
(E4,MX)
5%
50V
(EXCEPT E4,MX)
5%
50V
(E4,MX)
20%
50V
(E4,MX)
20%
50V
(E4,MX)
< FILTER >

1-577-319-11 FILTER, CERAMIC
< CONNECTOR >
1-564-704-11
1-564-507-11
1-564-714-11
1-564-713-11
1-564-507-11
PIN, CONNECTOR (SMALL TYPE) 2P

PLUG, CONNECTOR 4P
PLUG, CONNECTOR 4P
1-564-506-11 PLUG, CONNECTOR 3P

< DIODE >
D101
D102
D103
D106
D106
8-719-075-42
6-500-666-01
6-500-666-01
8-719-989-91
8-719-991-33
DIODE
DIODE
DIODE
DIODE
DIODE
SVC348SPA
1SV101(TPE4)
1SV101(TPE4)
1N4148A-T265 (US,CND,E4,MX)
1SS133T-77 (AEP,UK,AUS,KR,SP,TW)
D108
D361
D361
8-719-110-09 DIODE RD8.2ES-B3

8-719-989-91 DIODE 1N4148A-T265 (US,CND,E4,MX)
8-719-991-33 DIODE 1SS133T-77 (AEP,UK,AUS,KR,SP,TW)
Ref. No.
Part No.
Description
Part No.
Description
D362
D362
D363
D604
D605
8-719-989-91
8-719-991-33
8-719-110-06
8-719-991-33
8-719-991-33
DIODE
DIODE
DIODE
DIODE
DIODE
RD8.2ES-B1
1SS133T-77
1SS133T-77
Remark
Q111
Q361
Q362
Q403
Q404
8-729-029-23
6-550-579-11
6-550-578-21
8-729-037-03
8-729-037-03
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
D606
D607
D608
D609
D610
8-719-991-33
8-719-991-33
8-719-991-33
8-719-991-33
8-719-991-33
DIODE
DIODE
DIODE
DIODE
DIODE
1SS133T-77
1SS133T-77
1SS133T-77
1SS133T-77
1SS133T-77
Q602
Q603
Q604
Q605
Q801
6-550-577-01
8-729-036-89
8-729-036-89
8-729-029-90
8-729-048-99
TRANSISTOR 3DA8050-C-TP
TRANSISTOR KTC3198GR-A
TRANSISTOR KTC3198GR-A
TRANSISTOR DTC124XSA
FET 2SK2541-T
D611
D808
D808
D855
D855
8-719-989-91
8-719-989-91
8-719-991-33
8-719-989-91
8-719-991-33
DIODE
DIODE
DIODE
DIODE
DIODE
1N4148A-T265 (US,CND)
Q802
Q803
Q804
Q807
Q808
8-729-048-99
8-729-048-99
8-729-048-99
8-729-036-89
8-729-036-89
FET 2SK2541-T
FET 2SK2541-T
FET 2SK2541-T
TRANSISTOR KTC3198GR-A (E4,MX)
TRANSISTOR KTC3198GR-A (E4,MX)
D856
D856
8-719-989-91 DIODE 1N4148A-T265 (US,CND,E4,MX)

8-719-991-33 DIODE 1SS133T-77 (AEP,UK,AUS,KR,SP,TW)
Q809
Q810
Q851
Q852
Q853
8-729-048-99
8-729-048-99
8-729-033-97
6-550-577-01
8-729-201-53
FET 2SK2541-T
FET 2SK2541-T
TRANSISTOR 2SB1566E
TRANSISTOR 3DA8050-C-TP
TRANSISTOR 2SA1015-GR
Q854
8-729-036-89 TRANSISTOR KTC3198GR-A
< IC >
IC101
IC102
IC401
IC402
IC601
8-759-829-93
8-759-590-13
6-700-304-01
6-703-971-01
6-802-868-01
IC
IC
IC
IC
IC
TA2111N
LC72131D
MM1469XH
TA2109F(EL)
TC94A23F-704BH (US,CND,E4,MX)
IC601
IC801
6-803-213-01 IC TC94A23F-705BH (AEP,UK,AUS,KR,SP,TW)

6-703-710-01 IC TA8227P
< COIL >
Ref. No.
Remark
DTA114TSA-TP
3CG9012-F-TP
2SD1936T/U-AC
KTA1266GR-AT
KTA1266GR-AT
< RESISTOR >

R101
R102
R103
R104
R105
1-249-417-11
1-249-441-11
1-249-399-11
1-249-417-11
1-249-437-11
CARBON
CARBON
CARBON
CARBON
CARBON
1K
100K
33
1K
47K
10
4.7K
10
5%
5%
5%
5%
5%
1/4W
1/4W
1/4W
1/4W
1/4W
JW130
L101
L102
L103
L105
1-400-359-11
1-439-614-11
1-456-295-11
1-456-299-11
1-456-348-11
INDUCTOR
4.7uH
TRANSFORMER, IF
COIL, AIR-CORE
ANTENNA, FERRITE-ROD (AM)
COIL, AIR-CORE
R106
R107
R108
1-249-393-11 CARBON
1-249-425-11 CARBON
1-249-393-11 CARBON
R108
1-249-395-11 CARBON
L106
L108
L110
L401
L401
1-439-613-11
1-456-294-11
1-400-359-11
1-408-605-31
8-719-989-91
TRANSFORMER, IF
COIL, AIR-CORE
INDUCTOR
4.7uH
INDUCTOR
15uH (EXCEPT US,CND)
DIODE 1N4148A-T265 (US,CND)
R109
1-249-409-11 CARBON
5%
1/4W
5%
1/4W
5%
1/4W
(AEP,UK,AUS,KR,SP,TW)
15
5%
1/4W
(US,CND,E4,MX)
220
5%
1/4W
L403
L404
L405
1-817-265-11 INDUCTOR
1-400-359-11 INDUCTOR
1-817-265-11 INDUCTOR
1-249-409-11
1-249-433-11
1-249-417-11
1-249-425-11
1-249-441-11
CARBON
CARBON
CARBON
CARBON
CARBON
220
22K
1K
4.7K
100K
5%
5%
5%
5%
5%
1/4W
1/4W
1/4W
1/4W
1/4W
L406
1-817-265-11 INDUCTOR
L601
1-400-359-11 INDUCTOR
10uH
4.7uH
10uH
(EXCEPT US,CND,E4,MX)
10uH
(EXCEPT US,CND,E4,MX)
4.7uH
R110
R111
R112
R113
R114
R115
R116
R117
R118
R119
1-249-409-11
1-249-441-11
1-249-425-11
1-249-421-11
1-249-425-11
CARBON
CARBON
CARBON
CARBON
CARBON
220
100K
4.7K
2.2K
4.7K
5%
5%
5%
5%
5%
1/4W
1/4W
1/4W
1/4W
1/4W
L602
1-400-359-11 INDUCTOR
4.7uH
R121
R122
R123
R124
R125
1-249-411-11
1-249-441-11
1-249-441-11
1-249-437-11
1-249-425-11
CARBON
CARBON
CARBON
CARBON
CARBON
330
100K
100K
47K
4.7K
5%
5%
5%
5%
5%
1/4W
1/4W
1/4W
1/4W
1/4W
R126
R128
R129
R130
R131
1-249-425-11
1-249-437-11
1-249-437-11
1-249-429-11
1-249-406-11
CARBON
CARBON
CARBON
CARBON
CARBON
4.7K
47K
47K
10K
120
5%
5%
5%
5%
5%
1/4W
1/4W
1/4W
1/4W
1/4W
R132
R133
R134
1-249-426-11 CARBON
1-249-417-11 CARBON
1-249-415-11 CARBON
5.6K
1K
680
5%
5%
5%
1/4W
1/4W
1/4W
< TRANSISTOR >

Q101
Q102
Q103
Q104
Q105
8-729-029-72
8-729-119-78
8-729-201-53
8-729-029-23
8-729-036-89
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
DTC114YSA
2SC2785-HFE
2SA1015-GR
DTA114TSA-TP
KTC3198GR-A
Q106
Q107
Q108
Q109
Q110
8-729-036-89
8-729-231-82
8-729-231-82
8-729-029-26
8-729-029-26
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
KTC3198GR-A
2SC1923-O
2SC1923-O
DTA114YSA
DTA114YSA
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
R136
R137
R141
R142
R143
1-249-441-11
1-249-441-11
1-249-425-11
1-249-425-11
1-249-425-11
CARBON
CARBON
CARBON
CARBON
CARBON
100K
100K
4.7K
4.7K
4.7K
5%
5%
5%
5%
5%
1/4W
1/4W
1/4W
1/4W
1/4W
R470
R471
0 R475
R602
0 R603
1-247-883-00
1-247-883-00
1-212-950-00
1-249-427-11
1-212-942-00
CARBON
CARBON
FUSIBLE
CARBON
FUSIBLE
R144
R145
R146
R147
R150
1-249-425-11
1-249-425-11
1-249-425-11
1-249-421-11
1-247-843-11
CARBON
CARBON
CARBON
CARBON
CARBON
4.7K
4.7K
4.7K
2.2K
3.3K
5%
5%
5%
5%
5%
1/4W
1/4W
1/4W
1/4W
1/4W
R161
R314
R317
R318
R319
1-249-393-11
1-249-427-11
1-249-435-11
1-249-435-11
1-249-427-11
CARBON
CARBON
CARBON
CARBON
CARBON
10
6.8K
33K
33K
6.8K
5%
5%
5%
5%
5%
1/4W
1/4W
1/4W
1/4W
1/4W
R321
R322
R361
R362
R363
1-249-417-11
1-249-415-11
1-249-420-11
1-249-429-11
1-249-409-11
CARBON
CARBON
CARBON
CARBON
CARBON
1K
680
1.8K
10K
220
5%
5%
5%
5%
5%
1/4W
1/4W
1/4W
1/4W
1/4W
R364
R405
R406
R407
R408
1-249-417-11
1-249-429-11
1-249-429-11
1-249-417-11
1-249-419-11
CARBON
CARBON
CARBON
CARBON
CARBON
1K
10K
10K
1K
1.5K
5%
5%
5%
5%
5%
1/4W
1/4W
1/4W
1/4W
1/4W
R409
R410
R411
R412
R413
1-249-429-11
1-249-437-11
1-247-887-00
1-249-435-11
1-249-426-11
CARBON
CARBON
CARBON
CARBON
CARBON
10K
47K
220K
33K
5.6K
5%
5%
5%
5%
5%
1/4W
1/4W
1/4W
1/4W
1/4W
R414
R416
R417
R418
R419
1-249-425-11
1-247-807-31
1-249-393-11
1-249-437-11
1-247-881-00
CARBON
CARBON
CARBON
CARBON
CARBON
4.7K
100
10
47K
120K
5%
5%
5%
5%
5%
1/4W
1/4W
1/4W
1/4W
1/4W
R420
R421
R422
R423
R424
1-247-881-00
1-249-437-11
1-249-437-11
1-249-437-11
1-249-437-11
CARBON
CARBON
CARBON
CARBON
CARBON
120K
47K
47K
47K
47K
5%
5%
5%
5%
5%
1/4W
1/4W
1/4W
1/4W
1/4W
R425
R426
R427
R428
R429
1-249-429-11
1-249-417-11
1-249-421-11
1-249-439-11
1-249-434-11
CARBON
CARBON
CARBON
CARBON
CARBON
10K
1K
2.2K
68K
27K
5%
5%
5%
5%
5%
1/4W
1/4W
1/4W
1/4W
1/4W
R431
R432
R437
R439
R440
1-249-435-11
1-249-436-11
1-249-478-81
1-249-418-11
1-247-807-31
CARBON
CARBON
CARBON
CARBON
CARBON
33K
39K
2.2
1.2K
100
5%
5%
5%
5%
5%
1/4W
1/4W
1/2W F
1/4W
1/4W
R441
R443
R447
R449
R462
1-249-424-11
1-247-807-31
1-249-422-11
1-249-417-11
1-249-393-11
CARBON
CARBON
CARBON
CARBON
CARBON
3.9K
100
2.7K
1K
10
5%
5%
5%
5%
5%
1/4W
1/4W
1/4W
1/4W
1/4W
R463
R465
R466
1-249-393-11 CARBON
1-249-437-11 CARBON
1-249-437-11 CARBON
10
47K
47K
5%
5%
5%
1/4W
1/4W
1/4W
Remark
150K
150K
4.7
6.8K
2.2
5%
5%
5%
5%
5%
1/4W
1/4W
1/2W F
1/4W
1/2W F
(US,CND)
R604
R606
1-249-429-11 CARBON
1-249-429-11 CARBON
10K
10K
R608
R609
R610
1-249-437-11 CARBON
1-249-437-11 CARBON
1-249-429-11 CARBON
47K
47K
10K
5%
1/4W
5%
1/4W
(EXCEPT US,CND)
5%
1/4W
5%
1/4W
5%
1/4W
R611
R623
R636
R637
R639
1-249-441-11
1-247-887-00
1-249-417-11
1-249-435-11
1-247-891-00
CARBON
CARBON
CARBON
CARBON
CARBON
100K
220K
1K
33K
330K
5%
5%
5%
5%
5%
1/4W
1/4W
1/4W
1/4W
1/4W
R652
R653
R654
R655
R656
1-216-809-11
1-216-809-11
1-216-809-11
1-216-809-11
1-216-809-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
100
100
100
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R657
R658
R659
R660
R661
1-216-809-11
1-216-809-11
1-216-809-11
1-216-809-11
1-216-809-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
100
100
100
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R662
R663
R664
R665
R666
1-216-809-11
1-216-809-11
1-216-809-11
1-216-809-11
1-216-809-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
100
100
100
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R667
R668
R669
R705
R706
1-216-809-11
1-216-809-11
1-216-809-11
1-249-417-11
1-249-419-11
METAL CHIP
METAL CHIP
METAL CHIP
CARBON
CARBON
100
100
100
1K
1.5K
5%
5%
5%
5%
5%
1/10W
1/10W
1/10W
1/4W
1/4W
R707
R708
R709
R710
R711
1-249-417-11
1-249-417-11
1-249-417-11
1-249-417-11
1-249-417-11
CARBON
CARBON
CARBON
CARBON
CARBON
1K
1K
1K
1K
1K
5%
5%
5%
5%
5%
1/4W
1/4W
1/4W
1/4W
1/4W
R801
R802
R803
R804
R805
1-249-431-11
1-249-431-11
1-247-843-11
1-247-843-11
1-249-428-11
CARBON
CARBON
CARBON
CARBON
CARBON
15K
15K
3.3K
3.3K
8.2K
5%
1/4W
5%
1/4W
5%
1/4W
5%
1/4W
5%
1/4W
(EXCEPT E4,MX)
R805
1-249-431-11 CARBON
15K
5%
R806
1-249-428-11 CARBON
8.2K
R806
1-249-431-11 CARBON
15K
R808
R811
1-249-433-11 CARBON
1-247-807-31 CARBON
22K
100
R811
1-249-403-11 CARBON
68

specified.
1/4W
(E4,MX)
5%
1/4W
(EXCEPT E4,MX)
5%
1/4W
(E4,MX)
5%
1/4W
5%
1/4W
(E4,MX)
5%
1/4W
(EXCEPT E4,MX)

la scurit.
Ref. No.
Part No.
Description
Remark
R812
1-247-807-31 CARBON
100
R812
1-249-403-11 CARBON
68
0 R813
0 R814
R818
1-208-737-51 FUSIBLE
1-208-737-51 FUSIBLE
1-249-417-11 CARBON
2.2
2.2
1K
1/4W
(E4,MX)
5%
1/4W
(EXCEPT E4,MX)
5%
1/4W F
5%
1/4W F
5%
1/4W
R819
R848
R849
R850
R851
1-249-425-11
1-249-429-11
1-249-425-11
1-249-429-11
1-249-429-11
CARBON
CARBON
CARBON
CARBON
CARBON
4.7K
10K
4.7K
10K
10K
5%
5%
5%
5%
5%
1/4W
1/4W
1/4W
1/4W
1/4W
R852
R855
1-249-413-11 CARBON
1-249-441-11 CARBON
470
100K
5%
5%
R856
1-249-441-11 CARBON
100K
5%
R857
1-249-437-11 CARBON
47K
5%
R858
1-249-437-11 CARBON
47K
5%
1/4W
1/4W
(E4,MX)
1/4W
(E4,MX)
1/4W
(E4,MX)
1/4W
(E4,MX)
R859
1-249-421-11 CARBON
2.2K
5%
R860
1-249-421-11 CARBON
2.2K
5%
R861
1-249-419-11 CARBON
1.5K
5%
R862
1-249-419-11 CARBON
1.5K
5%
R863
1-249-419-11 CARBON
1.5K
5%
R864
1-249-419-11 CARBON
1.5K
5%
R865
R866
R867
R868
1-249-427-11
1-249-427-11
1-249-419-11
1-249-419-11
CARBON
CARBON
CARBON
CARBON
6.8K
6.8K
1.5K
1.5K
5%
5%
5%
5%
1/4W
(E4,MX)
1/4W
1/4W
1/4W
1/4W
R869
R870
R871
R872
R873
1-249-417-11
1-249-417-11
1-249-441-11
1-249-413-11
1-249-417-11
CARBON
CARBON
CARBON
CARBON
CARBON
1K
1K
100K
470
1K
5%
5%
5%
5%
5%
1/4W
1/4W
1/4W
1/4W
1/4W
R874
R875
1-249-417-11 CARBON
1-247-883-00 CARBON
1K
150K
5%
5%
1/4W
1/4W
< SWITCH >

SW802
Ref. No.
Part No.
1-786-484-11 SWITCH, SLIDE (FUNCTION)
1/4W
(E4,MX)
1/4W
(E4,MX)
1/4W
(E4,MX)
1/4W
(E4,MX)
1/4W
(E4,MX)
Description
Remark
< DIODE >
5%
ZD601 8-719-109-93 DIODE RD6.2ES-B2

*************************************************************
A-3683-544-A POWER BOARD, COMPLETE
***********************
< CAPACITOR >

C601
C602
C603
C604
C605
1-101-005-00
1-101-005-00
1-101-005-00
1-101-005-00
1-126-942-61
CERAMIC
CERAMIC
CERAMIC
CERAMIC
ELECT
0.022uF
0.022uF
0.022uF
0.022uF
1000uF
C606
1-101-005-00 CERAMIC
0.022uF
20%
50V
50V
50V
50V
25V
50V
< DIODE >

D601
8-719-063-79 DIODE 1N4002B
D602
8-719-063-79 DIODE 1N4002B
D603
8-719-063-79 DIODE 1N4002B
D604
8-719-063-79 DIODE 1N4002B
D605
8-719-063-79 DIODE 1N4002B
*************************************************************
A-3683-550-A TC BOARD, COMPLETE
*******************
< CAPACITOR >

C302
C303
C304
C305
C306
1-104-665-11
1-126-963-11
1-130-471-00
1-130-488-00
1-126-964-11
ELECT
ELECT
MYLAR
MYLAR
ELECT
100uF
4.7uF
0.001uF
0.027uF
10uF
20%
20%
5%
5%
20%
10V
50V
50V
50V
50V
C307
C308
C310
C311
C312
1-126-963-11
1-104-665-11
1-130-471-00
1-126-924-11
1-130-488-00
ELECT
ELECT
MYLAR
ELECT
MYLAR
4.7uF
100uF
0.001uF
330uF
0.027uF
20%
20%
5%
20%
5%
50V
10V
50V
10V
50V
C313
C314
C315
C316
C334
1-130-475-00
1-130-471-00
1-130-475-00
1-130-471-00
1-102-074-00
MYLAR
MYLAR
MYLAR
MYLAR
CERAMIC
0.0022uF
0.001uF
0.0022uF
0.001uF
0.001uF
5%
5%
5%
5%
10%
50V
50V
50V
50V
50V
C335
C336
C337
C338
C339
1-126-934-11
1-136-153-00
1-136-153-00
1-130-479-00
1-136-480-11
ELECT
FILM
FILM
MYLAR
FILM
220uF
0.01uF
0.01uF
0.0047uF
0.0015uF
20%
5%
5%
5%
5%
10V
50V
50V
50V
100V
C340
C393
C394
1-126-934-11 ELECT
1-102-112-00 CERAMIC
1-102-112-00 CERAMIC
220uF
330PF
330PF
20%
10%
10%
10V
50V
50V
< TRIMMER >

TC101
1-141-601-11 CAP, ADJ

< VARIABLE RESISTOR >
< CONNECTOR >

VR802
1-227-549-11 RES, VAR, CARBON 50K (VOLUME)

CN301
1-564-507-11 PLUG, CONNECTOR 4P
< VIBRATOR >

< DIODE >
X101
X401
X601
1-795-899-11 VIBRATOR, CRYSTAL (4.5MHz)

1-760-793-11 VIBRATOR, CERAMIC (18.934MHz)
1-795-851-11 VIBRATOR, CRYSTAL (75kHz)
D302
D303
8-719-991-33 DIODE 1SS133T-77

8-719-991-33 DIODE 1SS133T-77

specified.

la scurit.
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
< IC >
IC301
8-759-939-73 IC BA3308
155
165
203
302

6-550-577-01 TRANSISTOR 3DA8050-C-TP
< RESISTOR >
R301
R302
R303
R304
R305
1-249-440-11
1-247-887-00
1-249-440-11
1-247-807-31
1-249-403-11
CARBON
CARBON
CARBON
CARBON
CARBON
82K
220K
82K
100
68
5%
5%
5%
5%
5%
1/4W
1/4W
1/4W
1/4W
1/4W
R306
R307
R308
R309
R310
1-249-425-11
1-249-425-11
1-249-403-11
1-249-425-11
1-249-433-11
CARBON
CARBON
CARBON
CARBON
CARBON
4.7K
4.7K
68
4.7K
22K
5%
5%
5%
5%
5%
1/4W
1/4W
1/4W
1/4W
1/4W
R311
R312
R313
R315
R316
1-249-429-11
1-249-417-11
1-249-425-11
1-249-429-11
1-249-417-11
CARBON
CARBON
CARBON
CARBON
CARBON
10K
1K
4.7K
10K
1K
5%
5%
5%
5%
5%
1/4W
1/4W
1/4W
1/4W
1/4W
R323
R339
R340
R341
R342
1-249-433-11
1-249-429-11
1-249-401-11
1-247-843-11
1-249-429-11
CARBON
CARBON
CARBON
CARBON
CARBON
22K
10K
47
3.3K
10K
5%
5%
5%
5%
5%
1/4W
1/4W
1/4W
1/4W
1/4W
R343
R344
R395
R396
1-249-390-11
1-249-409-11
1-249-417-11
1-249-425-11
CARBON
CARBON
CARBON
CARBON
5.6
220
1K
4.7K
5%
5%
5%
5%
1/4W
1/4W
1/4W
1/4W
0 303
MAGNET
CABLE, FFC FLAT 16P
BATT (C) BOARD
CHASSIS ASSY (R) (RP), MOTOR (SPINDLE)
(including M701)
8-820-161-02 OPTICAL PICK-UP KSS-213R/C2N
ANT001
HE001
0 HP002
0 HP002
1-754-271-11
1-500-813-11
1-817-273-11
1-817-432-11
M501
M702
0 PT001
0 PT001
0 PT001
X-3383-964-1
X-2162-712-1
1-439-616-11
1-439-743-11
1-439-744-11
SPK1
SPK1
SPK1
SPK2
SPK2
SPK2
SPK2
< SWITCH >

1-786-485-11 SWITCH, RECORD (REC/PB)
< COIL >
T301
1-456-298-11 COIL, OSCILLATION
1-471-248-11
1-827-057-11
1-688-129-11
X-2162-704-1
ANTENNA, TELESCOPIC (FM)

HEAD, ERASE (ERASE)
INLET, AC (AC -) (US,CND,MX,TW)
INLET (PSE27), AC (AC -)
(AEP,UK,E4,AUS,KR,SP)
HRP001 1-500-814-11 HEAD, REC/PLAY (REC/PB)
SPK1
SW301
Remark
MISCELLANEOUS
***************
< TRANSISTOR >

Q301
Q302
Q303
Description
* SW1
SW401
MOTOR SUB ASSY (CAPSTAN/REEL)

GEAR ASSY (R) (RP), MOTOR (SLED)
TRANSFORMER, POWER (US,CND,MX,TW)
TRANSFORMER, POWER (AEP,UK,AUS,KR,SP)
TRANSFORMER, POWER (E4)
1-825-296-11 SPEAKER (10cm) (L-CH)

(TITANIUM)...(TITANIUM) (US,CND)
1-825-296-21 SPEAKER (10cm) (L-CH)
(SILVER)...(SILVER,BLUE)
(EXCEPT US,E4,MX)
1-825-542-11 SPEAKER (10cm) (L-CH)
(SILVER)...(SILVER) (E4,MX)
1-825-543-11 SPEAKER (10cm) (L-CH)
(TITANIUM)...(TITANIUM) (E4)
1-825-296-11 SPEAKER (10cm) (R-CH)
(TITANIUM)...(TITANIUM) (US,CND)
1-825-296-21 SPEAKER (10cm) (R-CH)
(SILVER)...(SILVER,BLUE)
(EXCEPT US,E4,MX)
1-825-542-11 SPEAKER (10cm) (R-CH)
(SILVER)...(SILVER) (E4,MX)
1-825-543-11 SPEAKER (10cm) (R-CH)
(TITANIUM)...(TITANIUM) (E4)
1-572-085-21 SWITCH, LEAF (LIMIT)
1-786-487-11 SWITCH, LEAF (CD DOOR)
0 SW901
1-786-524-11 SWITCH, VOLTAGE SELECTION (AC VOLTAGE)

(E4)
*************************************************************
< VARIABLE RESISTOR >

VR301 1-249-426-11 CARBON
5.6K
5%
1/4W
*************************************************************

specified.

la scurit.
Ref. No.
Part No.
Description
Remark
ACCESSORIES
************
0
0
0
0
0
0
1-477-950-11
1-569-008-32
1-696-819-11
1-769-412-21
1-770-019-11
REMOTE CONTROL (TD30)

ADAPTOR, CONVERSION (E4)
CORD, POWER (AUS)
CORD, POWER (AEP,UK,E4,SP)
ADAPTOR, CONVERSION PLUG 3P (UK)
1-776-985-11
1-783-878-11
3-249-839-11
3-249-839-21
CORD, POWER (KR)

CORD, POWER (US,CND,MX,TW)
MANUAL, INSTRUCTION (ENGLISH) (US)
MANUAL, INSTRUCTION (ENGLISH,FRENCH)
(CND)
3-249-839-31 MANUAL, INSTRUCTION (ENGLISH) (UK)
3-249-839-41 MANUAL, INSTRUCTION (ENGLISH,FRENCH,
SPANISH,GERMAN,ITALIAN,HUNGARIAN,
CZECH,POLISH,RUSSIAN) (AEP)
3-249-839-51 MANUAL, INSTRUCTION (ENGLISH,SPANISH)
(MX)
3-249-839-61 MANUAL, INSTRUCTION (ENGLISH,SPANISH,
PORTUGUESE) (E4)
3-249-839-71 MANUAL, INSTRUCTION (ENGLISH,FRENCH,
SPANISH,ARABIC) (SP)
3-249-839-81 MANUAL, INSTRUCTION (ENGLISH,KOREAN)
(KR)
3-254-679-11 MANUAL, INSTRUCTION (ENGLISH,
TRADITIONAL CHINESE) (TW)
3-254-679-21 MANUAL, INSTRUCTION (ENGLISH) (AUS)
3-255-158-01 LID, REMOTE CONTROL (for REMOTE CONTROL)
(TD30)

specified.

la scurit.
Clicking the version allows you to jump to the revised page.

Also, clicking the version at the upper on the revised page allows you to jump to the next revised page.
1.0
2003. 07
New

Aiwa CSD Td10

Uploaded by

Copyright:

Available Formats

Aiwa CSD Td10

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Aiwa CSD Td10

Uploaded by

Copyright:

Available Formats

CSD-TD10/TD30

Ver 1.0 2003. 07

Model Name Using Similar Mechanism

Continued on next page

CD STEREO RADIO CASSETTE RECORDER

Personal Audio Company

AEP, UK, E, AUS model

This Compact Disc player is classified as a CLASS 1

ATTENTION AU COMPOSANT AYANT RAPPORT

4. MECHANICAL ADJUSTMENTS ............................... 12

Main Board Section .......................................................... 32

8. ELECTRICAL PARTS LIST ......................................... 39

On repairing CD section, playing a disc without the lid (CD), use

1) After the connection, remove solder shown in the right figure.

The equipment can be removed using the following procedure.

CABI REAR ASSY

CABI TOP ASSY

TAPE MECHANISM DECK

CASS DOOR ASSY

3-10. OPTICAL PICK-UP

Follow the disassembly procedure in the numerical order given.

knob RTRY VOL

CABI rear assy

Removal the solder.

CABI top assy

CABI front assy

CABI top assy

two vibration proof rubbers

two vibration proof rubbers

Removal the solder.

two holders (PWB)

Removal the solder.

tape mechanism deck

CASS door assy

CABI front assy

HRP001 (REC play head)

pinch roller arm assy

more than 5.88 mN m

more than 5.88 mN m

Tape Tension Measurement

more than 100 g

Tape Bias Frequency Adjustment

Standard Output Level

SPEAKER L-CH (SPK1)

FUNCTION button: TAPE

tape speed adjustment

Tape Speed Adjustment

Adjust T301 so that frequency counter reading is 60 2 kHz.

SPEAKER, L-CH (SPK1)

Tape Bias Frequency

Adjust so that the value on the digital frequency counter is

Digital frequency counter

Tape speed adjustment

Adjust for a maximum reading on level meter.

Connecting Level Meter (FM and AM)

Connecting Digital Voltmeter (FM and AM)

Repeat the procedures in each adjustment several times, and the

Adjust for a maximum reading on level meter.

MAIN board (component side)