Ari Premio

ARI-PREMIO
-Plus
2,2 - 5 kN (495 - 1124 lbf)
Electric thrust actuator
Page 2
ARI-PREMIO
-Plus
12 - 15 kN (2698 - 3372 lbf)
Page 4
ARI-PREMIO
-Plus
Electric actuator ARI-PREMIO
-Plus
Features
optional input signal:
- 3-point from 12 to 250VAC/DC
- 0-10V
- 4-20mA
automatic valve travel adaption
free choice of flow characteristics
economy function for extended lifetime
emergency manual override handwheel standard
contactless position determination
optional thrust or travel switch
Edition 01/11 - Data subject to alteration Data sheet 000019 englisch (english)
2
ARI-PREMIO
-Plus

2,2 - 5 kN (495 - 1124 lbf)
Electric thrust actuator ARI-PREMIO
-Plus 2,2 - 5 kN (495 - 1124 lbf)

Pos. Description Pos. Description
50.1 Gearbox 50.40 Synchronous motor, complete
50.2 Cable gland 2 x M16x1,5 50.40.3 Capacitor
50.4 Sealing plug 1 x M16x1,5 50.43.2 Torque switch
50.6 Hood 50.45 Shift lever
50.7 Hood seal 50.58 Protective conductor terminal
50.10 Column 50.87 Threaded bush
50.12 Handwheel 50.134 Actuator control
50.14 Yoke 50.138 Board support
50.19 T-head bolt DIN 261-M12x40 50.139 Protective cover
50.23 Lift dial 50.140 Switch cover
50.27 Coupling 50.141 Trip sllide
50.30 Driving spindle 50.142 Shakeproof washer
50.31 Spindle safety feature 50.143 Connector, 2-pole (N/L)
50.32 Torsion safety feature 50.144 Connector, 3-pole (L/ L/ 0V)
50.34 Bellow 50.145 Connector, 6-pole (63/64/Y in/Y out)
50.36 Bushing 50.128 Collar nut Seal lock M6
50.37 Grub screw DIN 913 - M3x5
Edition 01/11 - Data subject to alteration
3
Type ARI-PREMIO
-Plus 2,2 kN (495 lbf) ARI-PREMIO
-Plus 5 kN (1124 lbf)

Thrust force 2,2 kN (495 lbf) 5,0 kN (1124 lbf)
Travel distance max. 50 mm (1,97 inch)
Duty classification in accordance with EN 60034-1/A11 S3 80% DC / max. 1200 c/h S3 50%DC / max. 1200 c/h
Control speed 0,38 mm/s (0,01 inch/s) 0,38 mm/s (0,01 inch/s) 1,0 mm/s (0,04 inch/s)
Motor voltage 230V - 50Hz / 60Hz
1)
Power consumption VA 24 36 78
For power consumption of other voltages and frequencies refer to type plate or on request.
Enclosure EN 60529 IP 65
Max. storage temperature -40 C ... +85 C (-40 F ... +185 F)
Max. permissible ambient temperature -20 C ... +70 C (-4 F ... +158 F)
Top mounted handwheel Yes (always running)
Operation
optional:
3-point : 12V DC/AC to 250V DC/AC
0 to 10V DC load resistance 470 kOhm resolution 10Bit
4 to 20mA DC load resistance 125 Ohm resolution 10Bit
Switching current max. 4A Triac-Output
Input for temperature sensor Sensor: PT1000
Max. cable cross section
Supply voltage: 2,5 mm (0,0039 inch)
3-point input: 2,5 mm (0,0039 inch)
Control signals: 1,5 mm (0,0023 inch)
Mounting position Horizontally to vertical above valve body (any position 90 from vertical).
Gear lubricant Klber / Isoflex Topas NB152
Weight 5,4 kg (11,9 lb) 6,0 kg (13,2 lb) 6,5 kg (14.3 lb)
Accessories ARI-PREMIO
-Plus 2,2 kN (495 lbf) ARI-PREMIO

Thrust force kN 2,2 kN (495 lbf) 5,0 kN (1124 lbf)
Electronic position indicator analog output 4-20 mA, switchable to 0-10V (invertable)
Relay board
- 2 intermediate positions, to set by switch, change-over contact 230V AC 6A/3A,
- 1 failure signal and 1 warning signal, changeover contacts 30V DC / 2A
Heating resistor 230V 50/60Hz
1)
, 115V 50/60Hz
1)
, 24V 50/60Hz
1)
, 15W
Additional voltage / frequencies
24V - 50/60Hz
1)
115V - 50/60Hz
1)
24V - 50Hz
24V - 60Hz
1)
115V - 50/60Hz
1)
Integrated temperature controller dTRON 316
Integrated temperature controller dTRON 316 in the ARI-PREMIO, controlrange -200C...+850C (-328F
...+1562F), power supply 24, 115 or 230 50/60Hz internally wired, input resistance thermometer and
thermocouples (to be provided by the customer), or standardized active current or voltage signals
Integrated temperature controller dTRON 316 /
PROFIBUS-DP
Controler incl. PROFIBUS-DP-interface and analogue input card, 24 V, 115 V or 230 V 50/60 Hz.
Controlling via bus line (must be supplied by the customer).
1)
Control speed and power consumption are 20% higher at frequency of 60 Hz.
ARI-PREMIO
-Plus

2,2 - 5 kN (495 - 1124 lbf)
Technical data
4
ARI-PREMIO
-Plus

12 - 15 kN (2698 - 3372 lbf)
Pos. Description Pos. Description
50.1 Gearbox 50.37 Grub screw DIN 913 - M3x5
50.2 Cable gland 2 x M16 x 1,5 / 1 x M20 x 1,5 50.40 Synchronous motor, complete
50.6 Hood 50.40.3 Capacitor
50.7 Hood seal 50.43.2 Torque switch
50.8 Counter-sunk screw DIN EN ISO 10642 - M5x20 50.45 Shift lever
50.9 Sealing washer DIN EN ISO 7089 - 5,3 50.58 Protective conductor terminal
50.10 Column 50.87 Threaded bush
50.12 Handwheel (engageable) 50.119 Fan wheel
50.24 Distance column 50.134 Actuator control
50.25 Hexagon nut DIN EN ISO 4032 - M12 50.138 Board support
50.26 2-ear clamp 50.139 Protective cover
50.27 Coupling 50.140 Switch cover
50.30 Driving spindle 50.141 Trip sllide
50.31 Spindle safety feature 50.142 Shakeproof washer
50.32 Torsion safety feature 50.143 Connector, 2-pole (N/L)
50.34 Bellow 50.144 Connector, 3-pole (L/ L/ 0V)
50.36 Set collar 50.145 Connector, 6-pole (63/64/Y in/Y out)
Electric thrust actuator ARI-PREMIO
-Plus 12 - 15 kN (2698 - 3372 lbf)

5
Type ARI-PREMIO
-Plus 12 kN (2698 lbf) ARI-PREMIO

Thrust force 12,0 kN (2698 lbf) 15,0 kN (2698 lbf)
Travel distance max. 65 mm (2,56 inch)
Duty classification in accordance with EN 60034-1/A11 S3 50% DC / max.1200 c/h
Control speed 0,38 mm/s (0,01 inch/s) 0,79 mm/s (0,03 inch/s) 0,38 mm/s (0,01 inch/s)
Motor voltage 230V - 50Hz
Power consumption VA 72 88 72
For power consumption of other voltages and frequencies refer to type plate or on request.
Enclosure EN 60529 IP 65
Max. storage temperature -40 C ... +85 C (-40 F ... +185 F)
Max. permissible ambient temperature -20 C ... +70 C (-4 F ... +158 F)
Top mounted handwheel Yes (engageable)
Operation
optional:
3-point : 12V DC/AC to 250V DC/AC
0 to 10V DC load resistance 470 kOhm resolution 10Bit
4 to 20mA DC load resistance 125 Ohm resolution 10Bit
Switching current max. 4A Triac-Output
Input for temperature sensor Sensor: PT1000
Max. cable cross section
Supply voltage: 2,5 mm (0,0039 inch)
3-point input: 2,5 mm (0,0039 inch)
Control signals: 1,5 mm (0,0023 inch)
Mounting position Horizontally to vertical above valve body (any position 90 from vertical).
Gear lubricant Molyduval Valenzia H2
Weight 10,5 kg (23,2 lb)
Accessories ARI-PREMIO
-Plus 12 kN (2698 lbf) ARI-PREMIO

Thrust force kN 12,0 kN (2698 lbf) 15,0 kN (2698 lbf)
Electronic position indicator analog output 4-20 mA, switchable to 0-10V (invertable)
Relay board
- 2 intermediate positions, to set by switch, change-over contact 230V AC 6A/3A,
- 1 failure signal and 1 warning signal, changeover contacts 30V DC / 2A
Heating resistor 230V 50/60Hz
1)
, 115V 50/60Hz
1)
, 24V 50/60Hz
1)
, 15W
Additional voltage / frequencies
24V - 50Hz / 24V - 60Hz
1)
115V - 50Hz / 115V - 60Hz
1)
230V - 60Hz
1)
3~400V - 50Hz / 3~400V - 60Hz
1)
(Only in addition with integrated reversing contactor!)
Integrated temperature controller dTRON 316
Integrated temperature controller dTRON 316 in the ARI-PREMIO, controlrange -200C...+850C (-328F bis
1562F), power supply 24, 115 or 230 50/60Hz internally wired, input resistance thermometer and thermocouples
(to be provided by the customer), or standardized active current or voltage signals
Integrated temperature controller dTRON 316 /
PROFIBUS-DP
Controler incl. PROFIBUS-DP-interface and analogue input card, 24 V, 115 V or 230 V 50/60 Hz.
Controlling via bus line (must be supplied by the customer).
1)
Control speed and power consumption are 20% higher at frequency of 60 Hz.
ARI-PREMIO
-Plus

12 - 15 kN (2698 - 3372 lbf)
Technical data
6
ARI-PREMIO
-Plus
Accessories
Analog output card
Output control signal Y
U
0 -10V DC
Measuring resistance (load resistance) max. 2 kOhm load resistance
Signal resolution 8 Bit
Output control signal Y
I
4 -20mA DC
Measuring resistance (load resistance) max. 500 Ohm
Signal resolution 8 Bit
Features:
for position transmitter
Relay card
Relay 1 (open) 1 (close) 3 warning 4 failure
Operating voltage U
B
6A 250V 2A 30V AC/DC
max. cable cross section 2,5 mm (0,0039 inch) 1,5 mm (0,0023 inch)
Contact material Gold
Storage temperature -40 C ... +85 C (-40 F ... +185 F)
Operating temperature -40 C ... +85 C (-40 F ... +185 F)
Features:
Setting of the switching points over push buttons
2 intermediate positions or end positions
1 failure signal
1 warning signal
1 collect failure signal at: - Control signal failure
- Position can not be achieved (motor / gear failure)
- Blockage (actual)
- Actuator not initialised
- Power failure
1 collect warning signal at: - Manual operating
- Blockage (detected)
- Position can not be achieved
- Maintenance
- Internal temperature exceeded
- ED management active
- Leveling
- To small travel during initialisation

Potentiometer
Type MP21 (Standard) RP19
Electric resistance values 500 Ohm, 1k Ohm, 2k Ohm, 5k Ohm 100 Ohm, 200 Ohm
Technology Conductive plastic Wire
Resistance tolerance 15 % 3 %
Independent linearity tolerance 1 % 0,5 %
Capacitance at +40C / 104F
(0 W at 125C / 257F)
1 Watt 0,5 Watt
Max. / wiper current 10 / 2 A 35 / 0,1 mA
Max. cable cross section 2,5 mm (0.0039 inch / AWG14)
Durability 10 Mio. turns 1 Mio. turns
7 Edition 01/11 - Data subject to alteration
Integrated tempertaure controller dTRON 316
Features
Programmable analogue input
2 auto-tune methods
Program function with 8 program sections or slope-function
2 Timer functions
4 limit-comparators
Interlock for keyboard and level
4 programmable setpionts, two parameter sets
4 digit resolution (max. 2 decimal places)
Controller characteristic P, PD, PI or PID
Actual value input by usual temperature sensors (see in table)
2 relay outputs
1 three-step output for actuator motor (by solid state relay 4A)
2 combinable binary inputs / binary outputs
Block structure
Analogue input
Binary input
Binary input
or
2 relay
Logical output
Logical output
3-point-step output for
actuator motor
or
Input thermocouples
Description Measuring range
Fe-CuNi L -200 ...+900C (-328 ...+1652F)
Fe-CuNi J DIN EN 60584 -200 ...+1200C (-328 ...+2192F)
Cu-CuNi U -200 ...+600C (-328 ...+1112F)
Cu-CuNi T DIN EN 60584 -200 ...+400C (-328 ...+752F)
NiCr-Ni K DIN EN 60584 -200 ...+1372C (-328 ...+2501F)
NiCr-CuNi E DIN EN 60584 -200 ...+1000C (-328 ...+1832F)
NiCrSi-NiSi N DIN EN 60584 -100 ...+1300C (-148 ...+2372F)
Pt10Rh-Pt S DIN EN 60584 0 ........+1768C (32 ...+3214F)
Pt13Rh-Pt R DIN EN 60584 0 ........+1768C (32 ...+3214F)
Pt30Rh-Pt6Rh B DIN EN 60584 0 ........+1820C (32 ...+3308F)
W5Re-W26Re C 0 ........+2320C (32 ...+4208F)
W3Re-W25Re D 0 ........+2495C (32 ...+4523F)
W3Re-W26Re 0 ........+2400C (32 ...+4352F)
Input standardized active current or voltage signals
Description Measuring range
Voltage 0 (2) ... 10V, input resistance Re > 100kOhm
Current 0 (4) ... 20mA, voltage drop 1,5 V
Input resistance thermometer
Description Type of connection Measuring range
Pt 100 (standard) 2-wire / 3-wire / 4-wire -200...+850C (328 ...+1562F)
Pt 500 2-wire / 3-wire / 4-wire -200...+850C (328 ...+1562F)
Pt 1000 2-wire / 3-wire / 4-wire -200...+850C (328 ...+1562F)
KTY11-6 2-wire -50...+150C (-58 ...+302F)
Sensor output resistance:
max. 30Ohm each circuit at 3- and 4-wire connection
Measurement current: approx. 250A
Circuit acjustment:
- at 3- and 4-wire connection not necessary.
- at 2-wire connection a circuit acjustment can be done with sofware by correcting
the actual value.
ARI-PREMIO
-Plus
Integrated tempertaure controller dTRON 316
Direct operator panel
Setting with switches, without a PC or tools
Failure signals acc. to Namur 107
Switchable economy function for extended lifetime
Local operation
3 switchable valve characteristics
Anti-block function
Control signal
Additional features:
Automatic valve travel adaption
Priority control for 3-point signals - e.g. for anti-freeze function
Economy function for extended lifetime
- Prevents cycling of the valve, reducing wear,
- Control optimisation for 3-point operation
Tight-closing function
Detection and suppression of interferences on the signal line
Automatic fault detection (incl. emergency functionality)
Temperature duty cycle management and performance adjustment
Avoid condensation by integrated humidity sensor with heating elements
Contactless position determination
Failure and warning signal via relay contact
ARI-PREMIO
-Plus
Details
ARI-PREMIO

-Plus

2,2 - 15 kN (495 - 3372 lbf)
Wiring diagram
H
Z
H
e
a
t
i
n
g

r
e
s
i
s
t
o
r
T
T
R
E
l
e
c
t
r
o
n
i
c

t
e
m
p
e
r
a
t
u
r
e

c
o
n
t
r
o
l
l
e
r

d
T
R
O
N
3
1
6
R
e
l
a
y
R
e
l
a
y

c
a
r
d
Y

o
u
t
A
n
a
l
o
g

o
u
t
p
u
t

c
a
r
d
W
i
r
e

c
o
n
n
e
c
t
i
o
n
s

o
f

t
h
e

d
i
f
f
e
r
e
n
t

v
a
l
v
e

t
y
p
e
s

S
t
r
a
i
g
h
t
w
a
y

v
a
l
v
e
3
-
w
a
y

v
a
l
v
e

w
i
t
h

m
i
x
i
n
g

p
l
u
g
3
-
w
a
y

v
a
l
v
e

w
i
t
h

d
i
v
e
r
t
i
n
g

p
l
u
g
c
l
o
s
e
d
A

-

A
B

o
p
e
n
A
B

-

B

o
p
e
n
o
p
e
n
B

-

A
B

o
p
e
n
A
B

-

A

o
p
e
n
s
t
a
n
d
a
r
d
A
c
c
e
s
s
o
r
i
e
s
B
i
n
a
r
y

i
n
p
u
t
B
i
n
a
r
y

i
n
p
u
t
l
o
c
i
g

1
2
V

a
l
t
e
r
-
n
a
t
i
v
e

t
o

b
i
n
a
r
y

i
n
p
u
t
s

b
i
n
1

a
n
d

b
i
n
2
p
o
w
e
r

s
u
p
p
l
y
2
3
0
V
/
3
A

B
i
n
a
r
y

o
u
t
p
u
t

(
O
u
t
1
)
2
3
0
V
/
3
A

B
i
n
a
r
y

o
u
t
p
u
t

(
O
u
t
2
)
I
n
p
u
t

r
e
s
i
s
t
a
n
c
e

t
h
e
r
m
o
m
e
t
e
r
T
e
l
e
t
r
a
n
s
-
m
i
t
t
e
r

T
h
e
r
m
o
-
e
l
e
m
e
n
t

C
u
r
r
e
n
t
0
(
4
)
.
.
.
2
0
m
A

V
o
l
t
a
g
e
0
(
2
)
.
.
.
1
0
V
O
u
t
p
u
t

t
o

t
h
e

a
c
t
u
a
t
o
r

V
o
l
t
a
g
e

a
n
d

p
o
w
e
r

s
u
p
p
l
y

v
o
l
t
a
g
e

a
r
e

e
q
u
a
l
ARI-PREMIO

-Plus

12 - 15 kN (2698 - 3372 lbf)
Wiring diagram
W
i
r
e

c
o
n
n
e
c
t
i
o
n
s

o
f

t
h
e

d
i
f
f
e
r
e
n
t

v
a
l
v
e

t
y
p
e
s

S
t
r
a
i
g
h
t
w
a
y

v
a
l
v
e
3
-
w
a
y

v
a
l
v
e

w
i
t
h

m
i
x
i
n
g

p
l
u
g
3
-
w
a
y

v
a
l
v
e

w
i
t
h

d
i
v
e
r
t
i
n
g

p
l
u
g

c
l
o
s
e
d

A

-

A
B

o
p
e
n

A
B

-

B

o
p
e
n

o
p
e
n

B

-

A
B

o
p
e
n

A
B

-

A

o
p
e
n
A
c
c
e
s
s
o
r
i
e
s
s
t
a
n
d
a
r
d
W
S
R
e
v
e
r
s
i
n
g

c
o
n
t
a
c
t
o
r
T
S
T
e
m
p
e
r
a
t
u
r
e

s
w
i
t
c
h

(
m
o
t
o
r
)
R
e
l
a
y
R
e
l
a
y

c
a
r
d
Y

o
u
t
A
n
a
l
o
g

o
u
t
p
u
t

c
a
r
d
Clearance required for
removal of hood
Clearance required for
removal of hood
Clearance required for removal
of hood
X L h
(mm) (mm) (mm)
236 602 max. 30
256 622 max. 50
271 637 max. 65
X L h
(inch) (inch) (inch)
9,29 23,70 max. 1,18
10,08 24,49 max. 1,97
10,67 25,08 max. 2,56
ARI-PREMIO
-Plus
Dimensions
ARI-PREMIO
-Plus
2,2 - 5 kN (495 - 1124 lbf)
Nominal travel max. 30 mm (1,18 inch)
ARI-PREMIO
-Plus
2,2 - 5 kN (495 - 1124 lbf)
Nominal travel > 30 mm - 50 mm (> 1,18 inch - 1,97 inch)
ARI-PREMIO
-Plus
12 - 15 kN (2698 - 3372 lbf)
Nominal travel max. 65 mm (2,56 inch)
Technology for the Future.
G E R M A N Q U A L I T Y V A L V E S
ARI-Armaturen Albert Richter GmbH & Co. KG, D-33756 Schlo Holte-Stukenbrock,
Tel. +49 52 07 / 994-0, Telefax +49 52 07 / 994-158 or 159 Internet: http://www.ari-armaturen.com E-mail: info.vertrieb@ari-armaturen.com

Ari Premio

Uploaded by

Copyright:

Available Formats

Ari Premio

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ari Premio

Uploaded by

Copyright:

Available Formats

ARI-PREMIO

-Plus 2,2 - 5 kN (495 - 1124 lbf)

-Plus 2,2 kN (495 lbf) ARI-PREMIO

-Plus 5 kN (1124 lbf)

-Plus 2,2 kN (495 lbf) ARI-PREMIO

-Plus 5 kN (1124 lbf)

-Plus 12 - 15 kN (2698 - 3372 lbf)

-Plus 12 kN (2698 lbf) ARI-PREMIO

-Plus 15 kN (3372 lbf)

-Plus 12 kN (2698 lbf) ARI-PREMIO

-Plus 15 kN (3372 lbf)

Edition 01/11 - Data subject to alteration

You might also like