Apb Series PLC

APB Series PLC
Features:
Main module: 12\22\24 points; Extension module: 22 points; It is flexible for extending, and the optimal configuration: 7 I/O extension modules, 1 voice module, and 1 SMS module; Program memory capacity: 320 FBDs, EEPROM;
It is allowed to place a Li-ion battery to power the clock;
Under the circumstance of DC12-24V, the main machine at most has 12 voltage analog inputs 0-10V, 2 current analog inputs 0/4-20mA and 2 analog outputs 0/4-20mA; High-speed operation: at most 4 high-speed inputs 10KHZ and 2 high-speed outputs 50KHZ; MODBUS protocol, and can be connected to SH-300 (Text Panel); New function blocks: pulse width modulation (PWM), pulse output (PTO), ACC, SMS and analog calculation etc.;
Technical Parameters Item APB-12MRD(L) APB-22MRD(L)

Surge Immunity Electrostatic Discharge (outer casing) Ambient Temperature Storage Temperature Ambient Humidity Degree of Protection Installation Dimensions (mm) IP20(Non-waterproof) 5%95%RH -40+70 -10+55
APB-12MTD(L) APB-22MTD(L)
APB-12MGD(L) APB-22MGD(L)
APB-22MRA(L) APB-24MRD
2kv(common mode), 1kv(differential mode), Level 3 (IEC61000-4-5) 8kv(air discharge)/6kv(contact discharge), Level 3 (IEC61000-4-5)
Fixing with M3 screws or Standard DIN rail mounting 71*99*90(12 points)126*99*90(22 points)126*99*90(24 points)
Programming Language Points Memory Capacity Filtering Duration of Input Signal Real-time Clock Password Protection High-speed Operation Analog Operation Power Failure Protection Simulate Monitoring Communication Interface Baud Rate Communication Protocol Power Supply Rated Voltage Permissible Range Power Consumption Digital Input Input Type Input Signal 0 Input Signal 1 Isolation
FBD
12 points/22 points/24 points/can support 7 I/O extension modules 320 FBDs
It can be set to improve the stability of signal
160h,can place a Li-ion battery if it is necessary Multiple passwords protection
At most 4 high-speed inputs 10KHz, and 2 high-speed outputs 50KHz
At most 12 voltage 0-10V and 2 current 0/4-20mA analog inputs, and 2 analog outputs 0/4-20mA
Yes
Yes
TTL interface; besides, communication module supports 2 RS485 and 1 RS232 interfaces
9600bps MODBUS RTU
DC12-24V DC11-28V
DC12-24V DC11-28V
DC12-24V DC11-28V
AC110-220V AC85V-265V
DC12-24V DC11-28V
3.5w
NPN/PNP DC0-5V DC8.5-28V Non-isolation
NPN/PNP AC0-70V AC85-265V Photoelectric isolation
Isolated Group Isolated Voltage Digital Output Output Type Rated Voltage Isolation Method Analog Input Input Type
---
---
---
14 2500/5000Vr.m.s
---
Relay 24VDC/220VAC Relay isolation
Transistor(NPN) 24VDC -
Transistor(PNP) 24VDC -
(DC0-10V)/8 inputs
(DC0-10V)/8 inputs
(DC0-10V)/8 inputs (DC0-10V)/12 inputs 12 bits
--
((0)4-20mA)/2 inputs (DC0-10V)/12 inputs
(DC0-10V)/12 inputs (DC0-10V)/12 inputs A/D Conversion Analog Output Output Type A/D Conversion ----12 bits 12 bits
--
12 bits
---
---
(0)4-20mA/2inputs 12 bits 2
Isolation
Non-isolation
Non-isolation
Non-isolation
Non-isolation
Non-isolation
High-speed Operation 4 inputs /10KHz Support Input Type single-phase counter and two-phase counter 2 outputs / 50KHZ Supports multiple Output Type -outputs: PTO pulse output, PWM pulse width modulation and acceleration/ deceleration single-phase pulse 2 outputs / 50KHZ Supports multiple outputs: PTO pulse output, PWM pulse width modulation and acceleration/ deceleration single-phase pulse --4 inputs /10KHz Support single-phase 4 inputs /10KHz Support single-phase --4 inputs /10KHz Support single-phase counter and two-phase counter
counter and two-phase counter and two-phase counter counter
Type
Note: The economical type is supplied without LCD panel, and the basic type is supplied with LCD panel. APB-12MRD(L) DC12V-24V 8 points digital input (can be used as analog inputs); I4-I7 can be high-speed ports APB-12MTD(L) DC12V-24V 8 points digital input (can be used as analog inputs); I4-I7 can be high-speed ports APB-12MGD(L) DC12V-24V 8 points digital input (can be used as analog inputs); I4-I7 can be high-speed ports APB-22MRA(L) APB-22MRD(L) AC100V-240V DC12V-24V 14 points input 14 points digital input (the first 12 points can be analog inputs); I4-I7 can be high-speed ports APB-22MTD(L) DC12V-24V 14 points digital input (the first 12 points can be analog inputs); I4-I7 can be high-speed ports APB-22MGD(L) DC12V-24V 14 points digital input (the first 12 points can be analog inputs); I4-I7 can be high-speed ports APB-24MRD DC12V-24V 2points for current input, and 14points for digital input (the first 12 points can be 0~10V analog inputs); I4-I7 can be high-speed ports APB-22ERA APB-22ERD APB-22ETD AC100V-240V DC12V-24V DC12V-24V 14 points digital input 14 points digital input 14 points digital input 8 points relay output 8 points relay output 8 point NPN transistor output 3 Q2Q3 can be high-speed output ports 6 points relay output + 2 analog outputs Q2Q3 can be high-speed output ports 8 points PNP transistor output 8 points NPN transistor output Q2Q3 can be high-speed output ports 8 points relay output 8 points relay output Q2Q3 can be high-speed output ports 4 points PNP transistor output 4 points NPN transistor output 4 points relay output
APB-22EGD
DC12V-24V
14 points digital input
8 point NPN transistor output
Dimensions
Take the 12 points module as an example. The 12 points, 22 points, and 24 points modules and other extension modules share the same width and height, the only one difference exists in the length.
Type 12 points main module 22 points main module 24 points main module I/O extension module SMS extension module
Dimensions(mm) 71*99*90
126*99*90
126*99*90
126*99*90
71*99*90

Apb Series PLC

Uploaded by

Copyright:

Available Formats

Apb Series PLC

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Apb Series PLC

Uploaded by

Copyright:

Available Formats

APB Series PLC

It is allowed to place a Li-ion battery to power the clock;

Technical Parameters Item APB-12MRD(L) APB-22MRD(L)

12 points/22 points/24 points/can support 7 I/O extension modules 320 FBDs

It can be set to improve the stability of signal

160h,can place a Li-ion battery if it is necessary Multiple passwords protection

At most 4 high-speed inputs 10KHz, and 2 high-speed outputs 50KHz

9600bps MODBUS RTU

NPN/PNP DC0-5V DC8.5-28V Non-isolation

NPN/PNP DC0-5V DC8.5-28V Non-isolation

NPN/PNP DC0-5V DC8.5-28V Non-isolation

NPN/PNP AC0-70V AC85-265V Photoelectric isolation

NPN/PNP DC0-5V DC8.5-28V Non-isolation

Relay 24VDC/220VAC Relay isolation

Relay 24VDC/220VAC Relay isolation

Relay 24VDC/220VAC Relay isolation

(DC0-10V)/8 inputs (DC0-10V)/12 inputs 12 bits

((0)4-20mA)/2 inputs (DC0-10V)/12 inputs

counter and two-phase counter and two-phase counter counter

14 points digital input

8 point NPN transistor output

You might also like