Engg Eco Notes

IEOR4003: Industrial Economics
Lecture Notes
Professor Guillermo Gallego
Fall 2002
These lecture notes summarize, and at times complement the material in the textbook:
Advanced Engineering Economics by Park and Sharpe-Bette.
The course is about industrial projects and investments. In this course an industrial project is
any candidate project that involves the outlay of cash in exchange for an anticipated return ow of
future benets. In contrast, an investment is a funded project. It involves the sacrice of something
now for the prospect of something later.
We distinguish between real (physical) and nancial investments (nancial instruments). Some
caracteristics that distinguish real from nancial investments are:
Real investments are not easily scalable
Real investments are often irreversible
Real investments shape the future of the rm
We will deal mostly with real investments, but at times we will need to talk about nancial
investments as well.
The course is concerned with how to allocate capital to projects within a rm to maximize the
value of the rm to its shareholders.
Course objective: Taking into account the cost of capital, budgets, taxes, depreciation, ination,
and uncertainty, decide which projects, if any, to undertake, reject, or postpone.
An investment project can be described by its cash ow prole, i.e., the amount and timing of
costs and benets in the planning horizon.
We will start by ignoring taxes, ination, depreciation, and uncertainty and later build these
features into the analysis.
Notes on Chapter 1: Accounting Income and Cash Flows.
Investment (a sacrice of something now for the prospect of something later).
Factors involved: time and risk. Type of investments: nancial (nancial instrument) and real
(physical assets).
Economic Analysis consists of economic evaluation of real investments.
Corporate Investment Framework: We will assume that the objective of any rm is to
maximize its value to its shareholders. From the economic analysis perspective a rm must make
three major decisions:
(1) the investment decision (Capital Budgeting is the allocation of capital to investment projects
whose benets are to be realized in the future),
(2) the nancing decision (sources of funds: sales of stocks, retained earnings, the sale of bonds,
and short term borrowing from nancial institutions) and
(3) the dividend decision.
In practice these decisions are interrelated. For convenience in economic analysis the investment
and nancial activities are usually separated. First the selection procedure for investment projects
are analyzed and then the choice of the nancing sources is considered. After this, modications are
made to the investment models to allow the capital budget to become a decision variable.
Accounting information is often needed in economic analysis and the student should be familiar
with the balance sheet, the income statement and the funds ow statement.
The balance sheet is a statement of the nancial position of a company as of a reporting date. It
shows the sources from which the current operating funds have been obtained (liabilities and owners
equity) and the types of property and property rights in which the funds are currently locked up
(assets). Liabilities are separated into current and other liabilities. Assets are generally divided into
current, xed, and other assets. Working capital is dened as current assets minus current liabilities
The income statement summarizes the revenue items, the expense items, and the dierence
between them for an accounting period. The two principal methods of reporting income are the cash
basis method and the accrual method. Most businesses use the accrual method.
IEOR4003: Industrial Economics page 2 Professor Guillermo Gallego
The funds ow statement details how the company acquired funds (sources) and how the
funds were used (uses).
A companys cash inows are approximately equal to its net income plus depreciation plus any
taxes it has deferred, and all three of these quantities depend on the depreciation method the
company uses for tax and reporting purposes.
Many companies use one depreciation method for tax purposes (usually the method that min-
imizes the current tax liability) and another for nancial reporting purposes (usually the method
that most accurately reects the decline in value of its assets over time). It is common practice
to use an accelerated depreciation method to compute the actual tax liability and a straight-line
depreciation method for nancing reporting. The dierence between the computed taxes and the
actual tax liability is called deferred taxes.
Cash Flows are used in evaluating the economic value of a project. Projects usually start with
an investment, which is a cash ow from the company to the project. Cash outows that move
from the company to the project are arbitrarily given a negative sign. Conversely, cash inows that
move from the project to the company are given a positive sign. Each ow is usually assumed to
occur at the end of the year. The net cash ow is the dierence between the cash inows and the
cash outows. It is also equal, see gure 1.2 in textbook, to the net income from operations, the
noncash depreciation expense, the net proceeds of equipment disposal, and new borrowing minus
the purchase of new equipment, the repayment of debt, and the net change in working capital. See
Example 1.8.
Notes on Chapter 2: Interest and Equivalence
An investment project can be described by its cash ow prole, i.e., the amount and timing of
expected costs (disbursements) and benets (receipts) in the planning horizon. The term payment
is used to denote the receipts less the disbursements that occur at the same point in time.
We classify project cash ows in two categories:
(1) discrete-time cash ows, and
(2) continuous-time cash ows.
Notation:
F
n
= discrete payment occurring at period n,
F
t
= continuous payment occurring at time t.
Money has a time value because:
(i) it has a potential earning power,
(ii) users may have dierent utility of consumption of dollars at dierent times, and
(iii) the buying power of the dollar changes through time.
Types of Interest: Simple and Compound.
If an amount of money is deposited in a nancial institution, interest accrues at regular time
intervals. Each time interval represents an interest period. Two approaches are used to calculate
the earned interest: simple interest and compound interest. The rst approach assumes that
interest earned is a linear function of time. Let i be the interest rate per period, P = amount
borrowed, F
N
= amount paid after N periods. Then, the interest payment is I = F
N
P = NPi,
so
F
N
= P +I = P(1 +Ni).
The compound interest approach assumes that the earned interest is not withdrawn at the end
of an interest period and is automatically redeposited with the original amount. If P is the initial
amount and i is the interest rate per period, then
F
1
= P(1 +i)
is the balance after 1 period,
F
2
= F
1
(1 +i) = P(1 +i)
2
is the balance after 2 periods, and
F
N
= P(1 +i)
N
is the balance after N periods. The total interest earned over N periods is
I = F
N
P = P[(1 +i)
N
1].
The additional interest earned with the compound interest is
N
= P[(1 +i)
N
(1 +Ni)].
Example: P = $1, 000, i = 9% and N = 10. Then, with a simple interest rate F
10
= $1, 900; while
with a compound interest rate F
10
= $2, 367.36. The additional interest earned by the compounded
interest method is
10
= $467.36.
Nominal and Eective Interest Rates.
In economic analysis a year is usually used as the interest period. In nancial transactions,
however the interest period may be of any duration. We use the terms nominal interest rate and
eective interest rates to describe more precisely the nature of compounding schemes.
Even though nancial institutions may use more than one interest period per year in compounding
the interest, they usually quote the interest on an annual basis. For example, a years rate at 1.5%
compounded monthly is typically quoted as 18% compounded monthly. When stated in this
fashion, the 18% is called a nominal interest rate or annual percentage rate. The eective interest
rate represents the actual interest earned or charged for a specied time period. The eective interest
rate based on a year is referred to as the eective annual interest rate i
a
. The eective interest rate
based on the payment period is called the eective interest rate per payment period i.
Example: Suppose a bank charges a rate of 12% compounded quarterly (four times per year). This
means that 3% is charged every quarter. The interest per dollar accrued at the end of the year
is (1.03)
4
1 = 0.1255. Thus the eective annual interest rate is i
a
= 12.55%. If the interest is
compounded monthly (12 times per year) then the eective annual interest rate is i
a
= (1.01)
12
1 =
0.1268 = 12.68%. In general
i
a
=
_
1 +
r
m
_
m
1
where i
a
is the eective annual interest rate, r is the nominal interest rate per year, m is the number
of interest periods per year, r/m is the eective interest rate per interest period.
As m goes to innity we obtain:
i
a
= lim
m
_
1 +
r
m
_
m
1 = e
r
1.
The above formula can be generalized to compute the eective interest rate in any payment
period. If c is the number of interest periods per payment period, then the eective interest rate
per payment period is given by
i =
_
1 +
r
m
_
c
1
i =
_
1 +
r
ck
_
c
1,
where k is the number of payment periods per year, and r/k is the nominal interest rate per payment
period.
Example: Let r = 12%, m = 12, c = 3, so k = 4. Then i
a
= 12.68%, and i = (1.01)
3
1 = 3.03%.
Useful Sums.
Geometric Series:
N
n=0
x
n
= 1 +x +. . . +x
N
=
1 x
N+1
1 x
where x = 1. If 1 < x < 1, then
n=0
x
n
=
1
1 x
.
Arithmetic-Geometric Series:
N
n=0
nx
n
= 0 +x + 2x
2
+. . . +Nx
N
=
x
_
1 (N + 1)x
N
+Nx
N+1
(1 x)
2
where x = 1.
If 1 < x < 1, then
n=0
nx
n
=
x
(1 x)
2
.
Discrete Compounding.
Consider the cash ow F
0
, F
1
, . . . , F
N
where F
n
represents the ow of cash at time n, with
the convention that positive values represent inows and negative values represent outows. What
amount now is equivalent to cash ow? We can answer this question very simply if we know the
current value of a dollar at time n = 0, 1, . . . , N. Let
n
denote the value of a dollar at time n. Then
the current, or present value of the cash ow is
P = F
0
+F
1
1
+F
2
2
+. . . + F
n
N
,
since by denition
0
= 1.
Suppose that the interest rate in period n is i
n
. How are the factors related to the interest
rates? At interest rate i
1
a dollar now will be worth 1 + i
1
dollars a year from now, so we need to
deposit
1
= 1/(1 +i
1
) dollars now to obtain a dollar a year from now. Thus, at interest rate i
1
,
1
dollars now are equivalent to 1 dollar at the end of year 1. Similarly, it takes
2
=
1
/(1+i
2
) dollars
now to obtain a dollar after two years by earning i
1
% in year one and i
2
% in year two. In general,
we have
n
=
1
(1 + i
1
) . . . (1 +i
n
)
.
Of special interest is the case when i
1
= i
2
= . . . = i
N
= i, i.e., the case where the interest rate
is constant over time. In this case we have
n
= 1/(1 +i)
n
= (1 +i)
n
.
The book has formulas, as well as tables, for the present value of cash ows of the form F
n
=
A, n = 1, . . . , N, F
n
= (n1)G, n = 1, . . . , N, and F
n
= F
1
(1+g)
n1
. The rst case is known as the
uniform series, the second as the arithmetic gradient series, and the third as the geometric gradient
series. In what follows, we will develop formulas for the present and future value of these series.
We start by considering the case in which the payment periods are identical to the compounding
periods.
Single Sum. The value F at time N of a single payment P invested at interest rate i is:
F = P(1 +i)
N
The factor (1 +i)
N
is called the single-payment compound amount factor, and is denoted by
(F/P, i, N).
This factor represents the value of one dollar after N years when it is invested at interest rate i.
Values of (F/P, i, N) are tabulated in tables at the back of the book.
Example: If P = $24, i = 6%, and N = 369, then
F = $24(F/P, 6%, 369) = $24(2, 177, 029, 343) = $52, 248, 704, 230.
2.
By inverting the above formula, we obtain
P = F(1 +i)
N
.
The factor (1 +i)
N
is called the single-payment present-worth factor, and is denoted by
(P/F, i, N).
This factor represents the amount we need to invest now for N years at interest rate i to obtain one
dollar at time N.
Uniform Series.
An amount A deposited at the end of each period, for N periods, in an account paying i% per
period would grow to:
F = A
N
n=1
(1 +i)
Nn
= A
_
(1 +i)
N
1
i
_
.
The term in brackets is called the uniform-series compound amount factor, or equal series
compound amount factor and is represented by
(F/A, i, N) =
_
(1 +i)
N
1
i
_
.
Example: An annual deposit of A = $1, 000, for N = 30 years at i = 10% grows to
F = $1, 000(164.49402) = $164, 494.02.
2.
The inverse relationship yields the uniform-series sinking-fund factor designated by
(A/F, i, N) =
_
i
(1 +i)
N
1
_
.
Example: To build a fund of F = $18, 000, in N = 18 years at i = 5% compounded annually
requires
A = $18, 000(A/F, 5%, 18) = $18, 000(0.0356) = $640.80
at the end of each year. 2.
Multiplying (P/F, i, N) by (F/A, i, N) we obtain
(P/A, i, N) =
_
(1 +i)
N
1
i(1 +i)
N
_
.
The bracketed term is the uniform-series present worth factor, designated by (P/A, i, N).
Example: What is the present worth of an annuity that pays A = $12, 000 at the end of each
year for N = 10 years at i = 8%.
P = $12, 000(P/A, 8%, 10) = $12, 000(6.710081397) = $80, 520.98.
2.
The inverse factor is called the capital recovery factor, and is denoted by (A/P, i, N).
(A/P, i, N) =
_
i(1 +i)
N
(1 +i)
N
1
_
.
Example: Consider a commercial mortgage at i = 8% over N = 20 years with a loan principal of
P = $1, 000, 000. The annual payment is
A = $1, 000, 000(A/P, 8%, 20) = $1, 000, 000(0.10185) = $101, 850.
What is the balance at the end of 5 years?
P = $101, 850(P/A, 8%, 15) = $871, 785.00.
2.
Linear Gradient Series.
Consider the series of payments:
F
n
= (n 1)G,
for n = 1, 2, . . . , N. The present value of this series is:
P =
N
n=1
(n 1)G(1 +i)
n
P = G
_
1 (1 +Ni)(1 +i)
N
i
2
_
.
The factor in brackets is called the gradient series present worth factor designated (P/G, i, N).
Example: If G = 100, N = 10, and i = 8%, we have
P == $100(P/G, 8%, 10) = $100(25.9768) = $2, 597.68.
2.
A uniform series equivalent to the gradient series is easily obtained by the relationship
between P and A. Resulting in the factor :
(A/G, i, N) =
_
1
i

N
(1 +i)
N
1
_
.
The future-worth equivalent of a gradient series can be easily obtained by multiplying the
uniform series equivalent to the gradient series by the (F/A, i, N) factor, resulting in
(F/G, i, N) =
G
i
[(F/A, i, N) N] .
Example: Let F
n
= $100 + $6(n 1), N = 8, i = 10%. Then,
F = $100(F/A, 10%, 8) + $6(F/G, 10%, 8) = $1, 349.76.
2.
Geometric Series.
Consider the geometric series of payments:
F
n
= F
1
(1 +g)
n1
,
for n = 1, 2, . . . , N. Then, the present value is given by
P =
F1
1+g
N
n=1
_
1+g
1+i
_
n
= F
1
_
1(1+g)
N
(1+i)
N
ig
_
for i = g.
Using g
=
1+i
1+g
1, we also obtain
P =
F
1
1 +g
(P/A, g
, N).
Example: If F
1
= $39, 600, g = 0.1, N = 5, i = 0.15, then
P = $39, 600
_
1 (1.1)
5
(1.15)
5
.05
_
= $157, 839.18.
2.
Compounding period dierent from payment period
Whenever the payment period and the compounding period do not correspond, we approach the
problem by nding the eective interest rate based on the payment period and then use this rate in
the formulas with the appropriate accounting of the number of payments.
Example: What is the present worth of quarterly payments of A = $1, 000 that extends over a
period of N = 5 years if the interest rate is r = 8% compounded monthly? The eective interest
rate per payment period (quarter) is i = (1 + 0.08/12)
3
1 = 2.0133%. There are N = 20 quarters
in 5 years, so
P = $1, 000(P/A, 2.0133%, 20) = $1, 000(16.33047) = $16, 330.47.
2.
Continuous Compounding.
Discrete Payments
Here again, we compute the eective interest rate i = e
r
1, and use it as above. This gives rise
to a whole new set of interest formulas. For instance, if we are interested in the present value of a
uniform series of payments A over N years at interest rate r compounded continuously, we can
use the previously discussed factor (P/A, i, N) with i = e
r
1. Alternatively, we can directly use
the continuous factor (P/A, r, N), where
(P/A, r, N) =
_
e
rN
1
e
rN
(e
r
1)
_
,
and so on.
Example: What is the present worth of a uniform series of year-end payments of A = $500 each
for N = 10 years if the interest rate is r = 8% compounded continuously?
The eective rate is i = e
0.08
1 = 8.33%. Then
P = $500(P/A, 8.33%, 10) = $3, 305.85.
2.
Example: A series of equal quarterly payments of A = $1, 000 each extends for N = 5 years.
What is the present worth at r = 8% compounded continuously?
The interest per quarter is i = e
0.02
1 = 2.02%,
P = $1, 000(P/A, 2.02%, 20) = $16, 319.70.
2.
Continuous Cash Flows.
When the cash ows occur very frequently we can approximate them by a continuous ow. Re-
member that we are assuming continuous compounding. For instance, a company that pays $100,000
a week in salaries may approximate the annual expense as if the total amount, say $5,200,000, was
paid continuously throughout the year. The approximation is done by letting F
t
denote the ow
rate at time t, and by integrating instead of summing. For present value, this results in the formula
P =
_
N
0
F
t
e
rt
dt,
and for future value, this results in
F =
_
N
0
F
t
e
r(Nt)
dt.
For example, if F
t
=

A, then
P =

A
_
N
0
e
rt
dt =

A
_
1 e
rN
r
_
,
and
F =

A
_
N
0
e
rt
dt =

A
_
e
rN
1
r
_
.
These factors are called the funds ow present-worth factor, denoted by (P/

A, r, N), and the
funds ow compound amount factor, denoted by (F/

A, r, N).
Example: The end of year equivalent payment to 52 payments of $100,000 a year at 8% com-
pounded continuously is
F = $5, 200, 000(F/
A, 8%, 1) = $5, 413, 659.40.

It is instructive to compare this to the exact calculation via
F = $100, 000(F/A, 8%/52, 52) = $5, 409, 328.36.
2.
Equivalence Of Cash Flows.
Concept of Equivalence.
Two cash ows are equivalent at interest rate i if we can convert one cash ow into the other by
using proper compound interest factors.
If we deposit P = $100 in a bank for N = 3 years at i = 8% we will accumulate F = $125.97.
We may say that at i = 8%, P = $100 at time zero is equivalent to F = $125.97 at time N = 3.
The notion of equivalence can also be posed when the balancing interest rate is unknown. For
example, consider the following two options. Option I is to receive a lump sum of $1,000 now;
option II is to receive $600 at the end of each year for two years. Finding the rate at which these
two options are equivalent can be done by to equating the future value of the two options, i.e., by
solving the equation
$1000(1 +i)
2
= $600(1 +i) + $600.
The tables can be used to nd that i = 13%. Of course, we could have also used present value or
annual worth.
Eect Of Ination On Cash Flow Equivalence.
The dollar is an imperfect unit of measure because its value changes with time. Ination (resp.,
deation) is a measure of the decline (resp., increase) in purchasing power of the dollar.
Measures of Ination:
CPI(Consumer Price Index) based on market basket,
GNPIPD(Gross National Product Implicit Price Deator),
PPI(Producer Price Index),
Most ination indexes are computed by monitoring the price changes of a basket of goods. This
tends to overstate ination for the following reasons:
Improvements in quality are not taken into account.
Opportunities for substitution are not taken into account.
Average Ination.
Suppose that ination in year one is 5%, and ination in year 2 is 10%, then the overall ination
is (1.05)(1.10) - 1 = 15.5%. The average ination f satises (1 +f)
2
= 1.155, so f = 7.47%. Notice
that the average ination is less than the arithmetic average. This is due to the geometric-arithmetic
inequality.
_
_
N
j=1
x
j
_
_
1/N
1
N
N
j=1
x
j
.
Explicit and Explicit Treatments of Ination in Discounting.
Actual Dollars. Represent the out of pocket dollars received or expended at any point in time.
(Current dollars, future dollars, inated dollars, nominal dollars).
Constant Dollars. Hypothetical purchasing power of future receipts and disbursements in
terms of the purchasing dollars in some base year. (Real dollars, deated dollars, todays dollars)
Market Interest rate i represents the opportunity to earn as reected by the actual interest
rates available in nancial markets.
Ination-free interest rate i
represents the earning power of money isolated from the eects

of ination. (Real interest rate, true interest rate, constant dollar interest rate.)
Note that i
can be negative.
General ination rate f represents the average annual percentage of increases in prices of
good and services.
Relationship between i, i
and f.
Amounts in constant dollars will be primed. The relationship between real and constant dollars
is through the ination rate. That is F
dollars at time n are equivalent to F = F
(1 + f)
n
actual
dollars at time n.
Now assume that the market interest rate is i. Then the present value of F actual dollars n years
from now is given by
P = F(1 +i)
n
.
On the other hand, the present value of F
real dollars n years from now is obtained via the

ination-free interest rate. Thus
P = F
(1 +i
)
n
.
From the above we deduce that
F(1 +i)
n
= F
(1 +i
)
n
= F(1 +f)
n
(1 +i
)
n
.
So
(1 +i) = (1 +i
)(1 +f)
or
i = i
+f +i
f.
We can also write i
in terms of i and f as
i
=
i f
1 +f
.
Note that f > 0 implies i
< i f.
Example: Suppose that i = 6% and f = 4%, then i
= .02/1.04 = .0193 = 1.93%.

Some economists view ination as a form of taxation on the holding of money. Indeed, if you
were to hold a dollar for a year its purchasing power at the end of the year would be (1 +f)
1
for
a loss of
f
1 +f
.
This is often called the ination tax. For example, if f = 4%, the ination tax is equal to 3.84%.
Most textbook examples assume that all cash ows respond equally to inationary trends. This
is no so in real life. For instance depreciation schedules are not aected by ination.
Home Ownership Analysis:
A question asked by many families is whether they should invest in buying a house. While there
may be many non economic reasons to own a house, we will analyze home ownership from a purely
economic view point.
Our objective is to nd the present cost of owning a house over a reasonable time horizon, say
N years. This cost can be used for instance, to compare against the cost of renting.
Let us assume that a house of price H is purchased now by a conventional loan. That is, we
give a 20% down payment and take a 30 year xed loan at nominal rate r compounded monthly.
In addition, let us assume that there are closing fees of the form A + 0.008Hj, where A includes
the cost of inspection, appraisal, title insurance and lawyers fees and j% represents the points
charged to secure the loan. Let T
n
denote property taxes due at the end of year n, and assume
that T
n
is of the form T
n
= T(1 + f
T
)
n1
, n = 1, . . . , N, where T represents the amount due at
the end of the rst year. Interest paid on the mortgage and property taxes are tax deductible; we
assume a tax rate t. Let M
n
denote the maintenance cost in year n, n = 1, . . . , N. We assume that
utilities and insurance cost are included in M
n
. Assume that this costs increase at rate f
M
so that
M
n
= M(1 + f
M
)
n1
, n = 1, . . . , N, where M is the maintenance cost during the rst year. Let us
assume that the house increases in value at the rate of f
H
. Thus, we estimate that after N years
the house will be sold at H(1 + f
H
)
N
. Assuming a sales commission of 6%, it is easy to write a
spreadsheet to compute the present value of the resulting cash ow at market interest rate i. This
present value can then be compared to the cost of renting.
To do the above calculations, we need to compute the present value of the sequence of interest
payments on an equal installment loan. This calculation is of importance since interest on a home
mortgage is tax deductible. We next show how to accomplish this task. Let
B amount borrowed,
i
b
interest rate per period,
N number of periods,
A = B(A/P, i
b
, N) payment per period.
The unpaid balance B
n
at the end of period n satises the dierence equation
B
n
= B
n1
(1 +i
b
) A, n = 1, ..., N,
with B
0
= B. Solving the dierence equation, we nd that
B
n
= B(1 +i
b
)
n
A
_
(1 +i
b
)
n
1
i
b
_
.
The interest paid in period n + 1, say I
n+1
is equal to i
b
B
n
. So, we have
I
n+1
= i
b
B
n
= A (A Bi
b
)(1 +i
b
)
n
.
Now, suppose we want to nd the present value of the cash ow I
n
, n = 1, . . . , N at rate i. We see
that I
n
is the dierence of a uniform series of payments and a geometric series of payments. Thus,
PV (i) =
N
n=1
I
n
(1 +i)
n
= A(P/A, i, N)
(A Bi
b
)
1 +i
b
(P/A, j, N),
where j =
ii
b
1+i
b
.
Notes on Chapter 3: Transform Techniques in Cash Flow Modeling
Z-transforms and Discrete Cash Flows.
Up to now we have been able to compute the present value of a limited number of cash ows:
constant, linear gradient and geometric gradient. Often we need to compute the present value of
more complex cash ows. A technique that comes in handy is the use of Z-transforms.
Consider an innite cash ow {f(n)}. Its present value can be written as
PV (i) =
n=0
f(n)(1 +i)
n
.
Letting z = 1 +i, we see that the present value, PV (i), can be written as
F(z) =
n=o
f(n)z
n
.
F(z) is called the Z-transform of f(n) and this relationship is denoted by writing F(z) = Z{f(n)}.
One of the most important and useful properties of Ztransforms is that there is a one to one
correspondence between the innite cash ows f(n) and their Ztransforms F(z). Another property
of Ztransforms is that linear combinations of cash ows correspond to the same linear combinations
of their Ztransforms. For instance, if f(n) F(z) and g(n) G(z), then f(n) +g(n)
F(z) +G(z).
These properties plus the fact that F(z) has been pre-computed for a large number of cash ows
f(n) is what makes the technique useful in practice. See Tables 3.1, 3.2, 3.3 and 3.4 in your book.
Example: If f(n) = 3n + 7(1 +j)
n
4e
jn
+ 8, n = 0, 1, . . . , then
F(z) = 3
_
z
(z 1)
2
_
+ 7
_
z
z (1 +j)
_
4
_
z
z e
j
_
+ 8
_
z
z 1
_
,
on substituting for z = 1 +i we obtain
F(z) = 3
_
1 +i
i
2
_
+ 7
_
1 +i
i j
_
4
_
1 +i
1 +i e
j
_
+ 8
_
1 +i
i
_
.
Most realistic cash ows extend over nite time horizons, e.g {f(n)}, n = 0, 1, . . . , k. Here we
cannot directly apply Ztransforms, but we can try writing the present value as the dierence of
two Ztransforms. Indeed, if
PV (i) =
k
n=0
f(n)z
n
.
Then
PV (i) =
n=0
f(n)z
n
z
(k+1)
n=0
f(n +k + 1)z
n
,
so that
PV (i) = F(z) z
(k+1)
G(z)
where F(z) = Z{f(n)} and G(z) = Z{f(n +k + 1)}.
More generally, if the cash ow is of the form {f(n)}, n = h, . . . , k, we can write
PV (i) = z
h
H(z) z
(k+1)
G(z),
where H(z) = Z{f(n +h)}.
Example: If f(n) = A, n = 1, . . . , N, then F(z) = G(z) = H(z) = Cz/(z 1), so
PV (i) = A
_
z
z 1
_
_
z
1
z
(N+1)
_
= A
_
1 (1 +i)
N
i
_
,
which recovers the (P/A, i, N) factor.
Laplace Transforms and Continuous Cash Flows
For continuous cash ows, the present value formulas
PV (r) =
_

0
f(t)e
rt
dt F(r),
correspond to the Laplace transforms. The techniques used to compute present values of complex
continuous cash ows, using Laplace transforms, are similar to those used for complex discrete cash
ows using Ztransforms.
Notes on Chapter 4: Depreciation and Corporate Taxation.
This is a brief treatment of the major aspects of the U.S. corporate law. The emphasis is on the
depreciation and tax treatment of assets used for production and distribution in a trade or business.
Corporate Tax Rates.
Tax Structure for Corporations.
The government levies a variety of taxes on corporations. Here we concentrate on federal income
tax levied against taxable income.
Taxable Income = Gross Income - Allowable Deductions.
See pp. 130 for a list of allowable deductions. The federal tax rate is on a graduated structure.
See table 4.1 in the book. Notice that the marginal tax rate goes from 15% to 25% to 34% to 39%
and then back to 34%. The reason that the marginal tax rate is not monotone increasing is that the
government wants a low tax rate (15%, 25%) for small corporations and a higher tax rate (34%) for
large corporations. The tax surcharge (39%) is designed to gradually take away the subsidy as the
taxable income increases. Notice that the average tax rate is monotonically increasing.
Eective and Marginal Income Tax Rates.
The marginal tax rate of a project, for a corporation, is the ratio of the additional income taxes
levied against the corporation as a consequence of engaging in the project to the additional taxable
income generated by the project.
The eective tax rate is the ratio of the total income taxes to the total taxable income.
Economic analysis should be done on the basis of marginal tax rates, because this is the rate at
which the projects under consideration would be taxed.
Notice that large, protable corporations have a marginal tax rate of 34% and an eective federal
tax rate close to 34%. Small corporations and those that uctuate between losses and prots will
have marginal tax rates that vary, being lower in low income years and higher in high income years.
How to Combine Federal and State Taxes.
State taxes are an allowable deduction in computing federal income taxes. In some states the
amount paid on federal taxes are an allowable deduction in computing state income taxes. What
follows is an analysis that determines the overall tax rate in either case. Let
t
f
federal tax per dollar of taxable income,
t
s
state tax per dollar of taxable income,
f federal tax per dollar of before state tax income,
s state tax per dollar of before federal tax income,
y = 1 if state taxes are deductible,
y = 0 if state taxes are not deductible.
Clearly
f = t
f
(1 s)
s = t
s
(1 yf),
or
f +t
f
s = t
f
yt
s
f +s = t
s
.
Solving the system of equations, we obtain,
f =
t
f
t
f
t
s
1 yt
s
t
f
,
s =
t
s
yt
f
t
s
1 yt
s
t
f
,
f +s =
t
f
+t
s
(1 +y)t
s
t
f
1 yt
s
t
f
.
Example: If t
f
= 34% and t
s
= 7%, then the overall tax rate is 37.12% or 38.62% depending on
whether federal taxes are deductible or not.
Taxes and Variability of Income
Consider the incomes of two rms A and B over a four year period. Firm A has a constant
income of $100,000.00 per year, for a total 4 year income of $400,000.00. Firm B has an income
of $500,000.00 in years 1 and 3, and a loss of $300,000.00 in years 2 and 4 for a total income of
$400,000.00. Assume that the tax rate is 40%. Then rm A pays $40,000.00 per year in taxes, for a
total of $160,000.00. On the other hand, if taxes are only paid on income, rm B pays $200,000.00
in years 1 and 3, and pays no taxes on years 2 and 4, for a total of $400,000.00.
Since this method of computing taxes penalizes rms with variable income, the tax law allows
losses to be carried forward up to ve years and backward up to 3 years.
Depreciation and its Relation to Income Taxes.
The cost of an asset that will be useful to a company for a number of years can not be written
in its entirety as an allowable deduction in the year it was purchased. Most xed assets have
a limited useful life and consequently their value decreases with time, i.e., they depreciate. The
federal government sets accounting guidelines as to how the cost of an asset can be depreciated, i.e.,
gradually converted into an allowable deduction. Notice that depreciation is not a cash expense, but
being an allowable deduction it reduces taxable income and hence reduces taxes.
The best way to understand the eect of depreciation on after tax income is to ignore for the
moment the government guidelines and focus on the objective of a protable rm, i.e., maximizing
the present value of future operations. Let
P installed cost of an asset,
F estimated salvage value,
N be the lifetime used for depreciation,
t
n
tax rate in year n,
D
n
depreciation taken in year n,
I
n
taxable income before depreciation allowance in year n.
We assume that the installed cost P is paid in full at time zero. Later we will discuss the eect of
nancing the asset. The cash ow at time n = 1, . . . , N is
I
n
(I
n
D
n
)t
n
= I
n
(1 t
n
) +t
n
D
n
.
Notice that the cash ows depend on the depreciation D
n
taken in year n. In the absence of govern-
ment regulations, one would select the depreciation schedule {D
n
}
N
n=1
maximizing the present value
of the resulting cash ows at certain interest rate i. This is equivalent to
max
N
n=1
D
n
t
n
(1 +i)
n
s.t.
N
n=1
D
n
= P F.
This problem is very easy to solve. We nd the period with largest discounted tax rate
k = argmax{n : t
n
(1 +i)
n
}
and set D
k
= P F and D
n
= 0 for n = k.
An important special case is when the tax rate is independent of n, say t
n
= t for all n, and the
interest rate i is positive. Then clearly k = 1, and therefore the optimal depreciation schedule is
D
1
= P F, and D
n
= 0, n 2.
As mentioned before, the government does not allow this. The second best thing to do when the
tax rate is constant is to depreciate an asset as quickly as possible. For this reason tax accountants
have come up with a number of depreciation methods: straight line, S.O.Y.D, declining balance ,
etc. We briey mention them here. In what follows BB
n
stands for book balance at the end of year
n = 1, . . . , N, with BB
0
= P. Then, the book balance is updated by the formula
BB
n
= BB
n1
D
n
,
for n = 1, . . . , N.
Straight-Line Method.
D
n
= (P F)/N, n = 1, . . . , N,
BB
n
= P n(P F)/N, n = 1, . . . , N.
This method may be used to depreciate any property; the lifetime used for depreciation is taken
from government ADR (asset depreciation range) tables.
Sum of Year Digits (SOYD) Method.
Notice that
N
n=1
n =
N(N + 1)
2
.
The idea is to depreciate the fraction
2(N + 1 n)
N(N + 1)
in year n, n = 1, . . . , N. Thus
D
n
=
_
2(N + 1 n)
N(N + 1)
_
(P F),
n = 1, . . . , N.
Declining Balance Method.
The declining balance method allocates each year a given fraction of the book balance at the end
of the previous year.
D
n
= BB
n1
= P(1 )
n1
.
The DDB (double declining balance) sets = 2/N, the 150% DB (one and a half declining balance)
sets = 1.5/N. A problem with this method is that, if unchecked, it is unlikely that BB
N
= F.
If BB
N
> F, a switch to straight line is made as soon as the straight line allowance is larger than
the declining balance allowance. Otherwise depreciation terminates as soon as the BB
n
< F, by
appropriately adjusting the depreciation during year n.
Tax Reform of 1986.
Assets are fully depreciated, i.e., F = 0.
Only two possible methods can be used; either the MACRS (Modied Accelerated Cost Recovery
System) or Straight Line.
To apply the MACRS we must rst classify personal property by determining the ADR (Asset
Depreciation Range) class life by using a U.S. Treasury Department Publication.
The MACRS is DDB with optimal switching to straight-line and mid year convention for assets
in the 3,5,7 and 10 year classes; 150%DB with optimal switching and mid year convention for assets
in the 15 and 20 year classes and straight line with mid month convention for property in the 27.5
and 31.5 year classes. See table 4.8.
Example: To construct table 4.8 for N = 5, note that the double declining balance applies, so
= 0.4. Because of the mid year convention, we allow
D
1
= 0.2 so BB
1
= 0.8,
D
2
= BB
1
= 0.32 so BB
2
= 0.48,
D
3
= 0.192 etc.
The tables include the timing of the optimal switching to straight line.
After Tax Cash Flow Analysis.
If the acceptance of a project is likely to change the companys marginal tax rate, then we can
estimate the after tax cash ow of the project by comparing the after tax cash ow with and without
the project.
For large, protable corporations, the acceptance or rejection of a project is not likely to change
the marginal tax rate. In this case, we can use generalized cash ows. This approach consists of
identifying items that increase or decrease the after tax cash ow. Items that increase the after tax
cash ow are:
after tax proceeds from sale of investment at time n,
bank loans at time n,
t
m
(depreciation at time n,)
(1 t
m
)(revenues at time n).
Items that decrease the after tax cash ow are:
investment at time n,
loan principal repayment at time n,
(1 t
m
) expenses at time n,
where t
m
represents the marginal tax rate and expenses include labor, materials and interest.
Impact of Ination. Assume that an asset worth P dollars is purchased at time 0 and that it is
100% nanced with interest payments {IP
n
}
N
n=1
, and principal payments {PP
n
}
N
n=1
. Assume further
that the asset will generate the string of revenues {R
n
}
N
n=1
; that it will be depreciated according to
the schedule {D
n
}
N
n=1
. The tax rate is assumed to be t throughout the horizon, and the ination
rate is assumed to be zero. According to the above formula for generalized cash ows, we have
F
n
= tD
n
+ (1 t)R
n
PP
n
(1 t)IP
n
= (1 t)R
n
+t(IP
n
+D
N
) (PP
n
+IP
n
)
= (1 t)R
n
+t(IP
n
+D
N
) TP
n
,
for n = 1, . . . , N, where TP
n
= IP
n
+PP
n
. The present value of the cash ow is
PV (i) = (1 t)
N
n=1
R
n
(1 +i)
n
+
N
n=1
[(IP
n
+D
n
)t TP
n
] (1 +i)
n
.
Now, assume a similar scenario where the ination rate f is positive and the revenues are re-
sponsive to ination. That is, R
n
= R
n
(1 +f)
n
. The actual dollar cash ows are therefore
G
n
= R
n
(1 t) + (IP
n
+D
n
)t TP
n
,
n = 1, . . . , N. Are we better or worst o? To answer this question we rst convert the actual dollar
cash ows to constant dollar cash ows, and then obtain the present value of the cash ows. The
constant dollar cash ows are
G
n
= R
n
(1 t) + [(IP
n
+D
n
)t TP
n
] (1 +f)
n
,
n = 1, . . . , N. Taking the present value we obtain
PV (i) = (1 t)
N
n=1
R
n
(1 +i)
n
+
N
n=1
[(IP
n
+D
n
)t TP
n
] (1 +f)
n
(1 +i)
n
.
Comparing the present value with and without ination, we see that the revenue term is not aected,
since revenues are responsive to ination. Consequently, the answer depends on the second term
involving the interest payments, the principal payments and the depreciation schedule. If (IP
n
+
D
n
)t TP
n
< 0 for all n = 1, . . . , N, as is usually the case when an asset is nanced, then we are
better o with positive ination. On the other hand, if the asset is paid in full at time zero, then
IP
n
= TP
n
= 0, n = 1, . . . , N, so we are better o without ination.
Chapter 5: Selecting a Minimum Attractive Rate of Return
The interest rate used for discounting cash ows has a direct eect on the outcome of project
evaluation and comparisons. A change in the interest rate can change the accept-reject decision for
an individual project, and it can alter the choice of the best from among several projects. The rate
is usually designated as the interest rate, or the discount rate; it is also known as the minimum
attractive rate of return, MARR.
Investments and Borrowing Opportunities.
Faced with a number of projects and nancial sources the decision makers problem is to select
now the projects that will add to the rms revenues and at the same time maintain the rms
nancial strength so that it will be able to undertake protable investments in the future.
If all the investment opportunities available to a rm were ranked in decreasing order of their
investment eciency criterion, and were plotted against their cumulative capital requirements we
would obtain the investment opportunity curve.
On the other hand the rm can sort its borrowing opportunities by their interest rate and plot
them against the cumulative capital availability. This results in the borrowing opportunity
curve.
It is not hard to argue that in a static environment, the intersection of the two curves represent
the point at which the rm should operate, accepting all the projects whose investment eciency is
higher than the eciency at the intersection of the two curves.
These curves will change from year to year. If this changes are not drastic, we can use the infor-
mation in the curve to develop the MARR. Otherwise we need to use more sophisticated techniques.
Here we have ignored (i) the short term and long term eects, (ii) the eect of making investments
on the costs of borrowing and (iii) the issue of project divisibility.
Uncertainties in prot projections may lead managers to play safe and operate somewhere to
the left of the intersection. Expectations of better investment opportunities in future years, with
corresponding cash needs may be another valid reason for not operating at the intersection point.
Idle funds are usually invested in relatively risk-free, liquid investments.
More typically, to set the MARR, the cost to the corporation of each type of nancing is computed
independently. The proportion from debt and equity sources is weighted to estimate the actual
interest rate paid for capital investment. The resulting rate is called the weighted average cost of
capital. The MARR is often set relative to this cost, sometimes equal to it, but usually higher,
depending upon the risk that must be taken when any of the available projects are accepted for
investment. More appropriately, the MARR should be set relative to the weighted marginal cost of
capital, which is typically higher than the weighted average cost of capital.
To compute the weighted average cost of capital, we must determine the after tax cost of debt
capital, say k
b
, and the cost of equity capital, say i
e
, and weight each by the relative amount of
debt and equity capital. Thus, if B denotes the market value of debt capital, and S represents the
market value of equity capital, then the weighted average cost of capital is
k =
B
V
k
b
+
S
V
i
e
where V = B +S.
Often corporations need to raise additional capital to fund projects. An important question is
how to raise additional capital. Debt nancing increases risk and decreases the ability of the rm
to raise debt capital in future years. On the positive side debt nancing can increase the return on
equity if the capital is invested protably. On the other hand, equity nancing decreases risk and
preserves the ability to borrow in the future. Equity nancing is, however, often regarded as bad
news which reduces the market value of current stockholders. Finding the best debt to equity ratio
is a non-trivial problem which we will only briey discuss here.
Rearranging, we obtain
i
e
= k +
B
S
(k k
b
).
We can think of k as the return on assets, of k
b
as the after tax return on bonds, and i
e
as the return
on equity. This equation suggests that if k > k
b
, the return on equity increases as we increase the
debt to equity ratio B/S. However, increasing, a highly leveraged company is perceived as more
risky by bondholders and after tax cost of debt capital is likely to rise reducing i
e
. Also, a higly
leverage rm magnies losses to equity holders in years where k < k
b
.
Of more importance to us is the marginal cost of capital as a minimal attractive rate of return.
Suppose that engaging in a project that requires C units of capital changes the average cost of
capital from k
0
on V to k
1
on V +C. Let r be the return of the project. Then, we are better o by
engaging in the project if and only if
Cr (V +C)k
1
V k
0
or equivalently if and only if
r k
1
+
V
C
(k
1
k
0
).
Since raising additional capital usually results in a higher average cost of capital, we have k
0
< k
1
and consequently r > k
1
.
As an example consider the following situation: k
0
= 14.5%, k
1
= 15%, V = $1, 000, 000, and
C = $100, 000. Then,
r 0.15 +
$1, 000, 000
$100, 000
(.15 .145) = 0.20.
To continue the example, consider what happens if r = 15% and the investment is accepted. Then,
Cr < (V +C)k
1
V k
0
or
$15, 000 > $165, 000 $145, 000 = $20, 000.
This example illustrates that cautioned should be exercised on determining the minimum attrac-
tive rate of return.
Cost of Capital from Individual Sources.
The bulk of nancing for large corporations is achieved with bonds and common stocks, referred
as debt and equity, respectively. For simplicity we will treat borrowing as consisting of these two
types of opportunities. In what follows we will learn to compute the cost to the corporation of debt
and equity.
Debt Capital
Recall that interest paid on loans is a tax-deductible expense. So the after-tax cost of loans and
bonds is less than the before-tax loan interest rate and bond yield rate.
Bank Loans: There are several cases to consider, depending on the number of interest payments
and tax payments per year. In the simplest case both are paid annually resulting in an after tax
rate
k
b
= (1 t
m
)i
b
where i
b
is the before-tax nominal interest rate per year and t
m
is the marginal corporate income
tax rate. See example 5.1
Most corporations, however, pay income taxes more frequently, say quarterly, based on estimated
income statements. So the tax benet of the interest expense is taken quarterly. To obtain the after
tax rate, we rst compute the quarterly rate by solving
1 + (i
b
t
m
/4)(P/A, k
bp
, 4) (1 +i
b
)(P/F, k
bp
, 4, ) = 0,
and then converting to the cost per year
k
b
= (1 +k
bp
)
4
1.
Here k
bp
represents the quarterly interest rate. See example 5.2
A third possibility is when the interest payments are actually made quarterly. Then the appro-
priate after-tax rate is
k
b
= [1 +i
bp
(1 t
m
)]
4
1.
Notice that the corresponding formula, 5.4, in the book is incorrect. See example 5.3
When there are discount points on a loan, the borrower does not receive the full amount of the
loan, but payments are calculated on the full amount. The eective loan rate is thereby increased.
For tax purposes the discount is prorated over the life of the loan. The exact method for nding
the after-tax rate requires setting up a loan schedule and computing the after tax cash ow.
The loan schedule method may be time consuming if an electronic spreadsheet that computes
the loan schedule and the after tax cash ow is not available. An alternative method, is to compute
the interest rate that makes the present value of the borrowers before-tax cash ow equal to zero,
and then multiplying it by one minus the tax rate (1 t
m
). See example 5.5.
Bonds: Before discussing the after-tax cost of bonds, we will dene and classify bonds. In
addition we will discuss how to compute the present value of a bond at a given interest rate, and
how to compute the yield of a bond at a given price.
A bond is a note issued by a corporation or government entity for the purpose of obtaining
needed capital for nancing projects. The repayment conditions are specied at the time the bonds
are issued. These conditions include the bond face value, the bond interest rate, the bond interest
repayment period, and the bond maturity date.
The bond face values is usually a multiple of $1000. The face value:
(i) represents the sum paid at maturity date,
(ii) determines the interest payment.
Let
F bond face value,
r bond interest rate,
m number of payments per period.
Then, the interest paid per period, is I = Fr/m. Often a bond is purchased at a discount (less
than face value) or at a premium (more than face value).
In addition to U.S. government bonds, bonds are usually classied as mortgage, debenture, or
municipal bonds. Mortgage bonds are backed by mortgages or specied assets. There are several
types of mortgage bonds including rst and second mortgage bonds. In the event that of foreclosure
by the bondholders, the rst-mortgage bonds take precedence during liquidation.
Debenture bonds are not backed by any form of collateral. The reputation of the company is
important for attracting investors to this type of bond. They can be convertible, non-convertible,
subordinate or junk bonds. Convertible bonds can be converted into common stock at a xed rate
as long as the bonds are outstanding. Subordinate debentures represents debt that ranks behind
other debt in the event of liquidation or reorganization. Junk bonds are debenture bonds rated BBB
or lower by Standard and Poors bond rating.
Finally, municipal bonds are income tax free bonds. They can be either general obligation or
revenue bonds. See handout for a more complete classication of bonds.
What is the present worth of a bond with face value F and coupon rate r, if it pays interest m
times per year, it matures in N years, and its cash ow is discounted at a nominal interest rate of
i% per year?
P =
Fr
m
(P/A, i/m, mN) +F(P/F, i/m, mN).
Example: If F = $10, 000, r = 6%, m = 2, N = 15, and i = 8%, then
P = 300(P/A, 4%, 30) + $10, 000(P/F, 4%, 30) = $8, 270.60.
The rate of return, or yield, of a bond with face value F, that matures in N years, with coupon
rate r, that pays interest m times per year, and sells for P dollars, is the interest rate that makes
the present value of the cash ow equal to zero. In other words, the yield is the interest rate at
which the cash ow generated by the bond is equivalent to its current price. Thus, the yield, is the
interest rate that solves
P =
Fr
m
(P/A, i/m, mN) +F(P/F, i/m, mN).
The solution to the above equation is the nominal yield. The eective yield is
(1 +i/m)
m
1.
Example: If F = $1, 000, r = 4%, m = 2, N = 20, and P = $800, then the nominal yield is 5.74%
and the eective yield is 5.86%.
The after-tax cost of bonds depends on the timing of interest and tax payments. In addition,
there are issuing expenses and discounts (or premiums) to be considered. The selling expense S
e
must be prorated over the maturity period N for tax purposes. The annual expenses A
e
are tax-
deductible each year. The discount or dierence between the face value F and the selling price P,
must be spread over the maturity period by prorating (bonds issued before 7-01-82) and by the yield
method (bonds issued after 7-01-82). We will assume quarterly tax payments.
To nd the after tax cost for bonds issued before 7-01-82 we must rst nd the after tax cost per
quarter by solving equation 5.5 in the book. The annual after tax rate is then obtained by using
equation 5.3. Alternatively, an approximate method can be used by solving equation 5.6 followed
by 5.3. See example 5.6.
To nd the after tax cost for bonds issued after 7-01-82 we must nd the yield to maturity of
the bond. We solve for i
b
using
P (Fr)(P/A, i
b
, N) F(P/F, i
b
, N) = 0.
Then, for tax purposes, we treat the bond as a loan at interest rate i
b
, with negative amortization
and a balloon payment. The after tax cash ow is obtained by subtracting from the actual interest
payments, the interest tax benet, the selling tax benet, and the annual expense tax benet. The
eective after tax cost of the bond is computed by nding the interest rate that makes the present
value of the cash ow equal to zero. See Table 5.1. In fact, this is only an approximate method. To
be more precise, we would need to consider quarterly payments of taxes, and semi-annual payments
of interest.
The above method, of nding the yield of the bond, developing a loan schedule, computing the
after tax cash ow, and nding the interest rate that makes the present value of the after tax cash
ow may be time consuming, if an electronic spreadsheet that computes the yield, the loan schedule,
and the after tax cash ow is not available. As for the case of a loan, an alternative method is to
compute the interest rate that makes the present value of the borrowers before-tax cash ow equal
to zero, and then multiplying it by one minus the tax rate (1 t
m
). Notice that the selling expenses
and the annual expenses should be taken into account in determining the before tax cash ow. See
page 178, for an example of this alternative method.
Equity Capital.
Issuance of preferred stock carries with it an obligation to pay a stated dividend annually. The
cost of capital is therefore the stated dividend divided by the price of the stock. However, the stock
is often sold at a slight discount, so the actual proceeds from the stock, rather than the stated price,
should be used as the denominator. For example, a 10% preferred stock with a value of $200, which
is sold for $190 per share (5% discount), has a cost of 10/0.95 = 10.53%. The dividends are paid
from after-tax corporate earnings.
Common Stock: The simplest valuation model for common stock considers only dividend
payments. The value of a share to a stockholder immediately after the year 0 dividend is
P
0
=
n=1
DPS
n
(1 +i
e
)
n
,
If, the dividends are constant, this results in
P
0
=
DPS
i
e
.
Growth model:
If DPS
n
= DPS
1
(1 + g)
n1
, and g < i
e
then
P
0
=
DPS
1
i
e
g
resulting in
i
e
=
DPS
1
P
0
+g.
The growth rate can be estimated by using the ratio of retained earnings to current share price
g = (EPS
1
DPS
1
)/P
0
so
i
e
=
EPS
1
P
0
.
Example A corporation plans to raise capital for a new plant through the sale of $2,500,000
worth of common stocks valued at $20 each. If a $1 dividend is planned for the rst year and an
appreciation of 9% per year is desired for future dividends. Estimate the cost of capital from this
stock issue.
i
e
=
1
20
+ 0.09 = 0.14.
2.
An alternative valuation model for common stocks, called the capital asset pricing model (CAPM),
consists of a regression analysis of the historical returns of a specic stock to the performance of the
market as a whole. The return required for a stock issue is the cost of equity capital i
e
. The CAPM
states that
i
e
= i
f
+(i
m
i
f
)
where i
f
is the return of a risk free asset such as US treasury bills, i
m
is the return on stocks in a
dened market portfolio by a prescribed index, and is the volatility factor of the companys stock.
If < 1.0, the stock is less volatile than the market. Conversely if > 1.0, the stock is more volatile
than the market.
Example: A computer manufacturer has an historic value of 1.7, the market premium is 5%
and treasury bills are paying 7%. Estimate the cost of the common stock capital.
i
e
= 0.07 + 1.7(0.05) = 0.155.
2.
Use of a Weighted-Average Cost of Capital.
We assume:
The ratio of debt nancing to equity nancing remains constant;
The costs of individual nancing sources remain the same;
The ratio of dividend growth remains constant;
The marginal tax rate remains the same.
For simplicity we assume annual cash ows. The general formula for computing a weighted-
average cost of capital is
k =
B
V
k
b
+
S
V
i
e
,
where B represents debt capital, S represents equity capital, and V = B+S represents total capital.
Notice that
B
V
is the fraction nanced by debt, and
S
V
is the fraction nanced by equity. If there are
several types of debt, the formula is expanded accordingly.
When the debt consists of bonds issued at par and there are no selling expenses or annual
expenses, we can write
k =
B
V
i
b
(1 t
m
) +
S
V
i
e
.
See example 5.9
Much has been written about the optimal debt to equity ratio. To understand the basic concepts
let EBIT represent earnings before interest and taxes. Then return on assets is given by r =
EBIT(1 t)/V, and return on equity is given by ROE = (EBIT(1 t) Bk
b
)/S, which can be
written as
ROE =
EBIT(1 t)
V
B +S
S

B
S
k
b
= r
B +S
S

B
S
k
b
= r +
B
S
(r k
b
).
Thus a large debt to equity ratio B/S magnies the return on equity when r > k
b
. Notice that a
high debt to equity ratio increases the risk taken by the rm. What happens if the return on assets
r is smaller than the after tax cost of debt capital k
b
?
Net Equity Flows.
When the cash ow computations reect interest, taxes, and debt repayment, what is left is
called net equity ow. The proper rate for discounting net equity ow, when using PV, is i
e
, the
equity interest rate. See example 5.10
After-Tax Composite Flows.
We can also evaluate expressions without explicitly treating the debt ows by using k, the
weighted average cost of capital. The debt nancing is treated implicitly, this method is particularly
appropriate when debt nancing, such as bonds, is not identied with individual investments but
rather enables the company to engage in a set of investments. See table 5.3
Both methods will yield the same solution if the debt-equity ratio remains constant. We recom-
mend the after-tax composite ow method.
Setting the MARR Relative to Cost of Capital
As discussed before, the MARR is usually set above the cost of capital when the measure of
risk is taken into account. There are no set rules to determine the MARR. However, it is common
to separate project alternatives into risk categories and establish the MARR relative to the cost of
capital for each category. For example, if the weighted average cost of capital is 12%, a corporation
may use a MARR of 13-17% for low risk projects such as productivity improvement, a MARR of 18-
24% for medium risk projects such as capacity expansion or the implementation of new, but accepted
technology, and a MARR of 25%-30% on high risk projects such as new product development,
international joint ventures, etc.
Notes on Chapter 6: Measures of Investment WorthSingle Project
Here we focus on evaluating single projects. Investment projects and securities (stocks, bonds,
etc. ) require initial outlays in order to provide a later sequence of cash receipts. Investments,
however, are not marketable securities.
We will study several dierent criteria to evaluate a single-project. For all the criteria we assume:
MARR is known to the decision maker,
stable, perfect capital market, can borrow or lend at MARR,
complete certainty about investment outcomes,
cash ows represent the net after tax cash ows.
Notation:
n index of time period,
i interest rate used for discounting, e.g., MARR or market rate,
F
n
net cash ow at the end of period n,
N project life.
Present Value Criterion: The present value at interest rate i is
PV (i) =
N
n=0
F
n
(1 +i)
n
.
More generally, if i = (i
n
)
N
n=1
, and i
n
is the interest rate in period n, then
PV (i) = F
0
+
N
n=1
F
n
[
n
k=1
(1 +i
k
)]
1
.
The criterion is to accept the project if PV (i) > 0, remain indierent if PV (i) = 0 and reject if
PV (i) < 0. A positive PV represents a surplus and the project should be accepted if sucient funds
are available for it.
Future Value Criterion: Compute the future value FV (i) and accept the project if FV (i) > 0,
remain indierent if FV (i) = 0 and reject if FV (i) < 0.
Annual Equivalence Criterion: Compute the annual equivalence AE(i) and accept the
project if AE(i) > 0, remain indierent if AE(i) = 0 and reject if AE(i) < 0.
All of the above criteria are equivalent.
Project Balance Concept: Let PB
0
= F
0
then the project balance at the end of year n at
interest rate i is given by
PB
n
= PB
n1
(1 +i) +F
n
, n = 1, . . . , N.
Sometimes we write PB(i)
n
to emphasize that dependence on i. We can think of PB
n
as the value
at time n of the truncated cash ow {F
k
: k = 0, . . . , n}. In particular PB
N
= FV. If PB
N
> 0,
we can say that the rm recovers the initial capital plus any interest owed, with and end of horizon
prot equal to PB
N
. If PB
N
= 0 the rm recovers exactly its investment plus interest owed. If
PB
N
< 0 the proceeds from the project are not enough to recover the investment plus the interest
owed, so the rm ends up with a loss.
If a project is accepted and the estimates of the cash ows are accurate, then PB
n
indicates the
balance that we would observe at the end of period n. A negative value of PB
n
indicates that the
investment plus the interest owed are yet unrecovered. If PB
n
is positive at time n, then the rm
has recovered the initial investment plus interest owed and has an over-recovered balance. Notice
that the formula that computes PB
n+1
from PB
n
assumes that PB
n
can be invested at rate i.
Example: Consider the cash ow {1600, 10000, 10000}. Assume i = 30%. Then PV (30%) =
175.15 > 0, so according to the present value criterion the project should be accepted. The project
Figure 1: Present Value of the Pump Problem
balances are PB
0
= 1, 600, PB
1
= 1, 600(1.3) + 10, 000 = 7, 920, PB
3
= 7, 920(1.3) 10, 000 =
296 > 0. Notice that FV = PB
3
= PV (1.3)
2
. Notice also that at the end of year one, the project
balance is positive and that there is a negative cash ow at the end of year 2. Since the project will
not generate more cash, we will need to invest PB
1
outside the project. The computations leading
to PB
2
assume that we can invest the money at 30%. If we cannot invest the money outside the
project at a suciently high interest rate, we may end up loosing money. 2.
This example indicates that one must use the PV criterion with care and must ask: What can
be done with over-recovered balances when they occur? Of course, if the company can actually
reinvest money outside the company at rate j = i, then the present value criterion will be correct.
Often however, the reinvestment assumption does not hold. When this happens, we must be very
careful in using traditional criteria such as present value, future value, annual equivalence. These
criteria assume that we can invest over-recovered balances at the same rate that we use to discount
the projects cash ow. If the rate at which we can invest over-recovered balances is smaller than
the discount rate, these traditional criteria may lead us to incorrectly accept a project; a mistake
that may have dire nancial consequences.
The safest way out, is to pre-specify a conservative rate, say j, at which we can invest over-
recovered balances. This rate may be the weighted average cost of capital, because we can always
use over-recovered balances to pay back debt, and to repurchase outstanding stock. Then, if a rate
i is to be charged to the project, we can compute the project balances as:
PB(i, j)
0
= F
0
and
PB(i, j)
n
=
_
PB(i, j)
n1
(1 +i) +F
n
if PB(i, j)
n1
0
PB(i, j)
n1
(1 +j) +F
n
if PB(i, j)
n1
> 0.
Notice that PB(i, j)
N
is the amount of money (possibly negative) that the rm will have at the
end of the project after repaying the investment and the interest owed. The obvious, and correct
criterion, is to accept the project only if PB(i, j)
N
> 0. This is the only criterion that I will
recommend. However, because most people use one or more of the traditional criteria that we have
discussed before, we need to make an eort to determine the conditions under which we can trust
these criteria.
It easy to show that PB(i, j)
n
is decreasing in i and increasing in j for all n (the terms increasing
and decreasing are to be interpreted in the non-strict sense). This is true, in particular, for PB(i, j)
N
,
The intuition behind this assertion is that the nal balance, at time N, after repaying the capital
and the interest owed will decrease as the interest rate charged to the project increases. Likewise,
the nal balance increases as the interest earned on over-recovered balances increases.
Because F
0
< 0, the initial balance is negative. If the interest rate charged to the project is very
large, then all the balances will be non-positive, and we will never have an occasion to invest at rate
j. Consequently, for large values of i, the balances PB(i, j)
n
are independent of j. Let i
min
be the
smallest value of i for which PB(i, j)
N
is independent of j. Thus for i < i
min
, there will be at least
one period with an over-recovered balance, whereas if i > i
min
all the balances, except perhaps the
last one, will be unrecovered. We divide the interval [0, ) into two regions: [0, i
min
) and [i
min
, ).
The rst region is called the mixed region, while the second region is called the pure region. If i (the
interest rate that is charged to the project) falls into the pure region, there are no over-recovered
balances, and so the decision to accept or to reject the project based on present value, future value,
or annual equivalence will be correct. On the other hand, if i falls into the mixed region, the present
value, the future value, and the annual equivalence method will yield an incorrect value unless j = i.
These incorrect values can lead us to accept a bad project. In summary, the present value, the future
value and the annual value criteria can be safely applied only if either j = i or if i > i
min
.
The Internal Rate Of Return Criterion:
The internal rate of return of a project with cash ow {F
n
}
N
n=0
is the rate i
such that
PV (i
) = 0. Notice that PV (i
) = 0 implies AE(i
) = FV (i
) = 0. The criterion is to accept the

project if i
> MARR, reject if i
< MARR and to remain indierent if i
= MARR.
The reason we quote the word the in the denition is that a root satisfying PV (i) does not
always exists, and even when it does, it is not always unique. Later we will see why we also have the
word internal under quotes. Finding the internal rate of return of the cash ow is equivalent
to nding the roots of a polynomial in x = (1 + i)
1
. This can be done by a number of methods
including bisection and Newtons method.
When is there a unique positive i
such that PV (i
) = 0? To answer this question we need a

few denitions. An investment is a cash ow with F
0
< 0; a conventional (or simple) investment is
an investment with only one change in the sign of the cash ow. A potentially protable investment
has a positive sum of net cash ows, i.e., PV (0) =

N
n=1
F
n
> 0.
Proposition 1 A potentially protable conventional investment has a unique positive root.
Proof: Because the cash ow is potentially protable, we have PV (0) > 0; because the cash ow
represents an investment we have PV () = F
0
< 0; consequently there is a sign change on PV (i).
Finally, because PV (i) is a continuous function of i, there must be a positive interest rate, say i
,
at which the present value vanishes. To show that i
is unique note that because the investment

is conventional the cash ow has one sign change, and from Descartes rule of signs we know that
PV (i) can have at most one sign change. 2.
Because of the above proposition, we can condently apply the IRR criterion to a potentially
protable conventional investment. One way to interpret the internal rate of return is to think of
it as the largest interest rate at which you can borrow money to nance the project and still break
even. Alternatively, you can think of the internal rate of return as the interest rate earned on the
unrecovered project balance of an investment. You should not, however, think of the internal rate
of return as the interest earned on the initial investment.
Can we extend the class of investments for which the IRR criterion is meaningful? The answer lies
on whether or not the project has over-recovered balances at the largest root that makes the present
value equal to zero. If there are no over-recovered balances, then we can meaningfully interpret that
rate as the IRR and apply the criterion. Otherwise, if there are over-recovered balances, we need to
know at what rate we can invest these balances before we can say something meaningful.
Let us call an investment pure, if it has no over-recovered balances at its largest root. Thus an
investment is pure if there exist an interest rate, say i
, such that PV (i
) = 0, PV (i) = 0 i i
,
and PB
n
(i
) 0 n = 0, . . . , N 1. An investment that is not pure is called mixed. It is easy to

show that all conventional investments are pure.
An alternative way of deciding whether a project is pure or mixed is to nd
i
min
.
= inf{i : PB(i)
n
0, n = 1, . . . , N 1},
and to evaluate PB(i
min
)
N
. If PB(i
min
)
N
> 0 then i
> i
min
, and the investment is pure, if
PB(i
min
)
N
= 0 then i
= i
min
, and the investment is pure, if PB(i
min
)
N
< 0 then i
< i
min
, and
the investment is mixed.
As mentioned above, once a project is classied as mixed, we cannot say something meaningful
unless we specify a reinvestment rate. Let j be the rate at which over-recovered balances can be
invested, and let i(j) be the interest rate at which the ending balance is zero. That is, i(j) is dened
implicitly by the formula:
PB(i(j), j)
N
= 0.
We can think of i(j) as the largest rate at which the rm can borrow money to invest in the project
and still break even. Notice that if i is the interest rate charged to the project, then the project is
protable only if i < i(j). This is because
PB(i, j)
N
> PB(i(j), j)
N
= 0.
The above gives rise to the criterion:
i(j) > MARR accept,
i(j) = MARR remain indierent,
i(j) < MARR reject.
Proposition 2 The rate i(j) exists and is unique. Furthermore i(j) is increasing in j.
Proof: Notice that PB(0, j)
N
>
n
F
n
> 0, and that F
0
< 0 implies that for suciently large inter-
est rate the ending balance is negative, i.e., lim
i
PB(i, j) < 0. Because PB(i, j)
N
is continuous,
there must be a positive rate i(j) such that PB(i(j), j) = 0.
To see that this rate is unique, just note that for xed j, PB(i, j)
N
is strictly decreasing in i, so
it cannot admit two dierent roots.
Finally, to see that i(j) is increasing in j note that
i(j)
j
=
PB(i,j)N
j
PB(i,j)N
i
> 0.
2.
We can obtain bounds on i(j) by observing PB(i
min
, j)
N
. If PB(i
min
, j)
N
0, then, since
PB(i, j)
N
is decreasing in i and is negative in the limit, we must have i(j) > i
min
. Recall that
projects for which PB(i
min
, j)
N
> 0 are called pure. In this case we can identify i(j) with the
largest root of PV (i) = 0, and the internal rate of return criterion makes sense. However, if
PB(i
min
, j)
N
< 0, then the root i(j) must occur to the left of i
min
, and therefore the project has
over-recovered balances. These projects are called mixed, and for mixed projects the use of the
internal rate of return criterion can lead us to accept a bad project.
In addition to the Return on Investment Capital Criterion, there are a number of modied rate
of return methods that can be shown to be consistent with present value. These methods make
consistent assumptions about the interest rate at which intermediate receipts from projects may be
invested. The reinvestment could be either in other projects or in the outside market.
Solomons Average Rate of Return (ARR)
This method assumes F
0
= C
0
< 0, F
n
0, n = 1, . . . , N, and that the net revenues are
reinvested at rate i, letting them accumulate until time N. It then seeks the rate, say s, which C
0
needs to earn to reach the same accumulated value by time N. Thus
C
0
(1 +s)
N
=
N
n=1
F
n
(1 +i)
Nn
so
s =
_
N
n=1
F
n
(1 +i)
Nn
C
0
_
1/N
1.
The criterion is
If s > i = MARR, accept,
if s = i, remain indierent,
if s < i, reject.
It is easy to see that this criterion is consistent with present value. See example 6.8.
Modied Internal Rate of Return (MIRR)
This method allows the F
n
s to be of any sign. For any number x, let x
+
= max(x, 0), and
x
= max(x, 0), note that x = x

+
x
and also that x

+
0, x
0. Given a cash ow {F
n
},
let G
n
= (F
n
)
+
and H
n
= (F
n
)
, n = 0, . . . , N. Thus, F
n
= G
n
H
n
, n so the cash ow {F
n
} can
be written as the dierence of {G
n
} and {H
n
}. Notice that the cash ow {G
n
} corresponds to net
inows, and the cash ow {H
n
} correspond to net outows.
The MIRR method rst computes the single outow at time zero, say H, that is equivalent to
the cash outows {H
n
} at rate i, and the single inow at time N, say G, that is equivalent to the
cash inows {G
n
} at rate i. Thus H =

N
n=0
H
n
(P/F, i, n), and G =

N
n=0
G
n
(F/P, i, Nn). Once
H and G are computed, we ask for the rate, say j, at which H needs to be invested at time zero to
accumulate to G by time N. That is,
H(1 +j)
N
= G,
so
j =
_
G
H
_
1/N
1.
The MIRR criterion is
If j > i = MARR, accept,
if j = i, remain indierent,
if j < i, reject.
Again, it can be shown that MIRR is consistent with present value. The fact that ARR and MIRR
are consistent with present value does not preclude the possibility of, as we have seen, PV itself
being wrong when the re-investment assumption at i does not hold.
Benet-Cost Ratios Another way to express the worthiness of a project is to compare the
benets with the costs and accept the project if the benets are larger than the costs.
There are at least three dierent benet-cost ratio methods, and they dier on what is meant by
benet and what is meant by costs.
Assume that F
n
= b
n
c
n
is the net after tax cash ow, where b
n
(resp., c
n
) represents the
revenue (resp., expense) at the end of period n. Now, let
B =
N
n=0
b
n
(1 +i)
n
and
C =
N
n=0
c
n
(1 +i)
n
.
So, B (resp., C) represents the present value of the cash inows (resp., outows).
The Aggregate B/C Ratio is dened as
R
A
=
B
C
.
An alternative expression for the benet-cost ratio, is to separate the present value of the cash
outows into two parts. The rst part, say I, is considered to be the initial investment while the
second part, say O = C I, consists of annual operating and maintenance costs. Notice that I may
consists of the present value of cash outow during several periods.
The Netted B/C Ratio is dened as
R
N
=
B O
I
.
Finally, the Lorie-Savage Ratio is dened as
L S =
B C
I
.
All of the above benet-cost ratios are equivalent to the PV criterion for single project acceptance.
Payback Period
A popular rule-of-thumb method for evaluating projects is to determine the number of periods
needed to recover the original investment. The method favors projects with small payback periods.
It can be shown through examples, that a blind application of the payback period method may
lead us to reject good projects. This is, in part, because the payback period method ignores the
time value of money, but mainly because it ignores the cash stream after the investment is initially
recovered. However, the payback period may serve as a secondary criterion. For instance, it may be
better to select a project with present value equal to $1,000,000 with a 2 year payback period, than
a project with present value equal to $1,001,000 with a 30 years payback period.
Time-Dependent Measures of Investment Worth
Recall the denition of PB(i, j)
n
, the project balance at time n where an interest rate i is charged
to the project, and over-recovered balances are invested at rate j. Among projects that have the
same life N, and the same ending balance PB(i, j)
N
, we may prefer those for which the area of
negative balance
ANB
N1
n=0
PB(i, j)
n
is smallest, or those for which
APB
N1
n=0
PB(i, j)
+
n
is largest. Here x
+
= max(x, 0), and x
= max(x, 0).
Such projects tend to give the investor greater exibility, in that they tend to tie-up the in-
vestment for a shorter period of time, or to generate positive cash balances for a longer period of
time.
Notice, that our denitions of ANP and APB generalizes the one given in the textbook when
j = i and PB(i, j)
n
has a unique change in sign as n increases.
Notes on Chapter 7: Decision Rules for Selecting among Multiple Alternatives
In the last few lectures, we have been concerned with dierent criteria to determine the worthiness
of a single-project. We now turn our attention to the problem of selecting one among a set of mutually
exclusive alternatives. Each alternative consists of a subset of the projects in consideration and, as
a rule, the do-nothing alternative is always included among the set of alternatives.
For example, if projects A, B and C are being considered, then the full set of alternatives consists
of the 8 subsets of {A, B, C}. Sometimes, however, we can reject some of the alternatives at the outset
because projects may exhibit some dependencies. For example, if B represents a die that can only
be used with machine A, then it does not make sense to consider subsets of {A, B, C} where project
B appears without project A. As a second example, if A is a machine, and B and C are projects that
require the full use of A, then it may not make sense to consider alternatives where both projects B
and C are present.
Once the set of feasible alternatives is considered, our problem is to select one and only one of
them. Before we go ahead and prescribe a way to select an alternative let us note that, in this
chapter, the decision is made without budgetary considerations. In addition, the decision is made
under the assumption that we can earn money at the rate we use to discount the after tax cash
ows. Under these conditions, if it is deemed appropriate to use the same discount rate for all the
alternatives, it is not dicult to show that, the best alternative is the one with the largest present
value.
As we have discussed earlier, the above assumptions do not always hold in practice. The results
of this section may still be valid, however, if the chosen alternative does not violate any existing
budget constraints, and if there are no over-recovered balances throughout its life.
Some of the criteria developed in Chapter 6 are harder to apply, e.g., rate of return methods and
benet-cost ratio methods. The reason is that these methods are relative measures of investment
worth. To see this, suppose that your cost of money is 18% and you have to select between the
following two investment alternatives. Alternative 1 requires an initial investment of $1,000, and
pays back $1,500 at the end of one year. On the other hand, alternative 2 requires an investment of
$10,000 and pays back $12,000 at the end of one year. The internal rate of return of alternative 1
is 50%, while the internal rate of return of alternative 2 is only 20%. Clearly both alternatives are
desirable if the cost of money is 10%; moreover, alternative 1 seems to be more attractive from the
internal rate of return point of view. Yet, present value calculations yield $363.63 for alternative 1
and $909.09 for alternative 2. Thus, we have an example of opposite ranking. One reason for this
is that the alternatives cannot be scaled. If we could take alternative 1 10 times, then we would
invest $10,000 and would receive $15,000 at the end of one year. In that case, both the present
value and the rate of return methods would agree. However, as mentioned above, mutually exclusive
alternatives cannot be scaled. A way to obtain results that are consistent with present value is to
evaluate the alternatives in some specic order. For potentially protable conventional investments,
we may sort the alternatives in non-decreasing order of the sum of their cash ows. For the above
example, alternative 1 comes before alternative 2. Alternative 1 is accepted because its internal rate
of return (50%), is higher than the cost of money (10%). Should we give up alternative 1 to take
alternative 2? That is equivalent to investing an additional $9,000 to earn $10,500 at the end of one
year. The internal rate of return of this marginal investment is 11.67%, and since this rate of return
is larger than the cost of money we should give up alternative 1 and take alternative 2 instead.
A similar incremental approach can be used with other rate of return methods, as well as with
the benet-to-cost ratio methods. The ordering of the projects that should be used with the dierent
methods is given in page 246 of your book. Our recommendation, is to stay away from incremental
methods.
If the lifetime of each alternative is nite, and a reinvestment assumption is made, then the project
balance method can be used. The criterion is to select the alternative with largest PB(i, j)
N
where
N represents the last period in which an alternative has a non-zero cash ow.
Some projects may have a very long life, and may necessitate periodic replacement of an asset.
It is common to assume that the asset will be replaced by an identical asset at the same cost. This
is the repeatability assumption. Implicit in this assumption, is that we are working with constant,
as opposed to real, dollars. Therefore, it is appropriate to use an ination-free discount rate. It is
also possible to model technological changes. See the book of Canada & White for a few of these
models.
On the other hand, a project may have a shorter life than the asset useful life. In this case,
careful consideration of salvage values are important.
Notes on Chapter 8: Deterministic Capital Budgeting Models
The objective of the capital budgeting process is the selection of an optimal portfolio of invest-
ments from a set of alternative investment proposals. An optimal portfolio of investments is
dened as the set of investments that makes the greatest possible contribution to the achievement of
the organizations goals, given its constraints. The constraints faced by a corporation in the capital
budgeting process can include limited supplies of capital or other resources (personnel, for example)
and dependencies between investment proposals. A dependency occurs if two projects are mutually
exclusiveacceptance of one requires the rejection of the otheror if one project can be accepted only
if another is accepted. Assuming that the organizational goals and constraints can be formulated
as linear functions and that the future cash ows associated with the investment proposals can be
forecast, the optimal portfolio of investments can be found using linear programming (LP).
An advantage of linear programming is that it leads to better solutions than alternative methods.
Ranking is the most common alternative method. Some of the limitations of ranking methods include
the inability to handle either multiple-resource constraints or interrelationships between the proposed
investment alternatives.
A limitation of LP models for capital budgeting is portfolios of investment proposals which may
contain fractional investment proposals. The optimal solution may, for example, include buying a
third of an oil tanker. If the optimal set of investments identied through linear programming is
infeasible because of fractional projects, integer programming should be used. Despite the fractional
projects limitations, solutions to LP problems have meaningful interpretations which we will discuss
later on.
As an example, consider Corporation ABC. ABC must determine the most protable mix between
two competing investment projects subject to budgetary constraints. Let x
1
and x
2
be the number
of units of Investment 1 and 2 to be funded. Suppose that the present value per unit of Investment
1 is $6 and the net present value per unit of Investment 2 is $3. Suppose that Investment 1 requires
$2 of cash per unit in year 1, and $4 per unit in year 2, while Investment 2 requires $3 of cash per
unit in year 1, and $1 per unit in year 2. The total funds available in year 1 are $12, and the total
amount of cash available for investment in year 2 is $8. Allied wants to maximize net present value.
The linear program can be written as
max Z = 6x
1
+ 3x
2
2x
1
+ 3x
2
12
4x
1
+ x
2
8
x
1
0, x
2
0.
The optimal solution is Z
= 6(1.2) + 3(3.2) = $16.8. If fractional projects are not allowed then we

must require x
1
and x
2
to be integers, and solve the corresponding integer programming problem.
In this case the optimal solution is Z
= 6(1) + 3(3) = $15.

To state the problem in more general terms, the objective of the linear programming in capital
budgeting is the allocation of limited resources among competitive activities (capital investments)
in such a way that some measure of eectiveness involving these activities is optimized. Because the
available resources are limited in quantity, the problem faced by the decision maker is the selection
of the most eective mix of activities.
The choice of the objective function depends on the type of data available regarding the invest-
ment proposals under consideration. For example, if quantiable data are available regarding the
covariance between expected returns from the investment proposals, then minimization of the ex-
pected risk should be considered as the objective function. In that case, however, a related technique
called quadratic programming should be used. If such data are unavailable, as in most capital bud-
geting problems, the objective function should be maximization of either the total net present value
or the total value of the investment proposals at a specic time in the future. If we can estimate
how long we will be involved with the investment proposals, we should maximize the total value of
the investment proposals at a future time (that is, at the end of our expected involvement with the
investment proposals). If we cannot reasonably estimate how long we are expected to be involved
with the investment proposals, we should choose to maximize total net present value.
The limits on both the availability of resources and on the possible relationships among some of
the decision variables are represented by equations or inequalities called constraints. The problem
is to nd the values for the decision variables that result in maximization of the objective function
subject to the constraints.
To be an LP problem , the objective function and the constraints all must be linear functions.
Stated mathematically, the purpose of the LP model is to determine the value of the decision vector
x that maximizes
z = c
x
subject to Ax b
x 0.
Linear programs can be solved by a variety of methods, including the so called interior point
methods. The most common method, however, is the simplex method; an algorithm that moves
from vertex to vertex of the polyhedron {x : Ax b, x 0}, while improving the objective value,
until no further improvement is possible.
Ecient versions of the simplex method capabale of solving moderate size problems are now
available in spreasheets such as Quattro Pro 6.0 for Windows and Excell 6.0 for Windows. Alter-
natively, commercial codes such as LINDO, and GAMS are also available. You should learn how to
use one of these codes to solve the homework problems that I will be assigning.
In a typical constrained capital budgeting problem, there are limits on the amounts of certain
resources available. Examples of such constraints are limits on trained manpower available, limits
on certain materials, and limits on the amount of capital available.
Capital rationing is a frequently encountered constrained capital budgeting problem in which the
amount of capital available for investment is limited. We will rst study the pure capital rationing
with no lending or borrowing allowed. We then present a model that allows both lending and
borrowing. The intermediate models that allow borrowing but not lending or viceversa, can be
obtained from the later model, by eliminating the lending or borrowing opportunities.
Pure Capital Rationing, with No Lending or Borrowing Allowed
It should be noted that many managers actually operate in a pure capital rationing environment
once the budget has been determined during the planning stage. Therefore, pure capital rationing
is a realistic assumption in many cases.
The linear programming problem is
Z = max
J
j=1
p
j
x
j
subject to
J
j=1
a
nj
x
j
M
n
, n = 0, , N
x
j
1, j = 1, , J
0 x
j
j = 1, , J,
where
p
j
is the present value of project j = 1, , J,
x
j
project selection variable,
a
nj
cash ow for project j at time n,
M
n
budget limit at time n,
N end of the planning period.
It can be shown that there exist an optimal solution to this LP with at most N + 1 fractional
projects, i.e., at most N +1 of the x variables will be dierent form zero or one. Of course, if all the
variables are non-fractional, then the solution is optimal. Even if there are some fractional projects,
the LP solution may still be useful in a number of ways. First, the optimal value of the objective
function, say Z
, is an upper bound on the value of the optimal integer solution. Second, valuable
information can be obtained showing the impact on the objective function of making small changes
to the budget values. Such information is obtained by looking at the solution to the dual linear
program. Such a solution can be readily obtained from the solution of the original, or primal
problem, and it is part of the standard output of most commercial codes. The dual information
may indicate, for example, that the budget for year one is larger than needed, and that there is
a high return associated with an increased budget in year 2. On the basis of the dual solution,
management may decide that it is in its best interest to revise the budget. Thus, the solution to the
linear program, and its associated dual, may be a very helpful device to management in deciding
the budget levels.
The dual of the LP can be written as:
v = min
N
n=0
n
M
n
+
J
j=1
j
subject to
N
n=0
a
nj
n
+
j
p
j
, j = 1, , J
n
0, n = 0, , N
j
0 j = 1, , J,
Here the
n
is the dual variable corresponding to the budget constraint
J
j=1
a
nj
x
j
M
n
,
and
j
is the dual variable associated with the constraint x
j
1.
At the optimal solution, say x
, the complementary slackness conditions must hold. These

conditions state that
n
_
_
M
n
+
J
j=1
a
nj
x
j
_
_
= 0, n,
x
j
_
j
p
j
n=0
a
nj
n
_
, j,
j
(1 x
j
) = 0, j,
The economic interpretation of the dual variable
n
, is the rate by which the value of the objective
function increases, at the optimal solution, as the budget in year n is increased. The economic
interpretation of the dual variable
j
is the rate at which the value of the objective function increases
at the optimal solution as we relax the constraint x
j
1, and eectively allow more than one unit
of alternative j to be taken.
Notice that if at the optimal solution not all the budget for year n is used, then by complementary
slackness
n
= 0. This implies that a small increase in the the budget in year n has no impact on
the value of the objective function. Conversely, if
n
> 0, then all the budget in year n is used in
the optimal solution. Notice that x
j
> 0, and
j
0, imply that
p
j
+
N
n=0
a
nj
n
0.
If a project is not fully accepted, i.e., if x
j
< 1, then
j
= 0, so
p
j
+
N
n=0
a
nj
n
= 0.
Finally, for rejected projects,
j
= 0, and in view of the constraint
n=0
a
nj
n
+
j

j
we have
p
j
+
N
n=0
a
nj
n
0.
The economic interpretation is that the present value of a project plus the sum of the cash ows
over the horizon discounted by the dual variables is non-negative for a fully accepted project, is
exactly zero for a partially accepted project, and it is non-positive for a rejected project.
Notice that constraints on scare resources other than capital can easily be added to the above
LP formulation.
Capital Budgeting
The pure capital rationing problem was developed under the assumption that the rm had no
access to external markets, that is, it could neither borrow nor lend money. Including borrowing
opportunities, without including lending opportunities, while keeping present value as the objective
function may lead to situations where the rm borrows money at a rate that is higher than the
discount rate, see example 8.2. Borrowing at a rate higher than the discount rate may happen when
a highly protable project is not fully taken because of tight budget constraints as shown in the
following example.
Example: Suppose that the discount rate is 20%, and that there is a single project which requires
an initial investment of $1000 and pays back $1300 at the end of one year. Suppose further that the
investment budget is $900, but that borrowing at 25% is possible. Should the rm borrow the $100
needed to take the full project? If the rm borrows $100 to take the project it will collect $1,175 at
the end of the year. This results in a present value of $1,175/1.2 = $979.16 which is larger than the
present value of taking 90% of the project and also larger than the present value of the do nothing
alternative. The explanation lies in the fact that the total cost of securing $1000 for one year is at
most $205 = ($180 = $900(.2)) + ($25 = $100(.25)), while the project returns $300. 2.
There are, however, some inconsistencies in present value models that involve borrowing and
lending that are not easy to overcome. See the discussion in section 8.3.2. Thus, when borrowing
and lending opportunities are present, it is best to look at the horizon models. The horizon, is
typically the number of periods for which the rm plans to be involved in the projects. In these
models the objective function is the value, at the horizon, of the cash ows occurring after the
horizon of the selected projects plus any cash that is available for lending minus any debt at that
horizon. The budget constraints, are now cash balance equations that take into account borrowing
and lending during the period as well as collection and payment of earlier lending and borrowing
activities.
The simplest horizon model has a borrowing rate equal to the lending rate. See Table 8.6 for the
detailed formulation, and Table 8.8 for the dual formulation. One peculiarity of this model is that
the set of accepted projects is independent of the budget levels. In fact, under this model we would
accept all projects with positive PV, and reject all projects with negative present value regardless
of the budget levels. This is not surprising given that we can borrow and lend at the same rate.
Notice however, that the value of the objective function is non-decreasing in the budget levels.
One extension is to have borrowing rates higher than lending rates and to impose upper bounds
on borrowing during each budget period. This would involve adding a constraint of the form
w
n
W
n
, n,
where W
n
is the limit on borrowing during year n, that is, the rms credit.
Another extension is to allow dierent borrowing rates during each period. The rm will rst
borrow from the least expensive source, and will then borrow at a higher rate once this source is
exhausted. The cost of borrowing is assumed to have the shape of a step function; the larger the
amount borrowed, within limits, the higher the interest rate. Let r
i
be the interest rate that applies
to borrowing an amount greater than W
i1
and less than or equal to W
i
. A rm will borrow at
interest rate r
i
if it exhausts the limits placed on its borrowing at lower interest rates. Let v
n
be
the lending amount from time period n to n + 1. The LP formulation is thus
Z = max
J
j=1
a
j
x
j
+v
N

I
i=1
w
iN
j=1
a
0j
x
j
+v
0
i=1
w
i0
M
0
j=1
a
nj
x
j
(1 +r)v
n1
+v
n
+
I
i=1
(1 +r
i
)w
i,n1
i=1
w
in
M
n
n
w
in
W
in
i, n,
0 x
j
1.
Notice that the model with only one borrowing and one lending rate, see Section 8.5.2, corre-
sponds to the case r = r
l
< r
1
= r
b
, with W
1n
= n.
For the case with only one borrowing source with ulimited capacity we can obtain the following
results by studying the dual problem and the complementary slackness conditions. For a project
that is partially selected (0 < x
j
< 1) we must have
a
j
+
N
n=0
a
nj
n
= 0.
For a project that is rejected (x
j
= 0) we have
a
j
+
N
n=0
a
nj
n
0.
Finally, for a fully accepted project (x
j
= 1)
a
j
+
N
n=0
a
nj
n
=
j
0.
We can interpret the quantity a
j
+

N
n=0
a
nj
n
as the value of the cash ow at time N where the
value of a dollar at time n N is valued at
n
dollars at time N, and a dollar at time n > N is
valued at (1 +i)
Nn
at time N.
As for the dual variables we have
N
= 1 and for n = 0, 1, . . . , N 1
(1 +r
l
)
n+1

n
(1 +r
b
)
n+1
.
Moroever, during periods of borrowing w
n
> 0 we have
n
= (1 + r
b
)
n+1
and during periods
of lending v
n
> 0 we have
n
= (1 + r
l
)
n+1
. It then follows, from the complementary slackness
conditions that if r
l
< r
b
then v
n
> 0 implies w
n
= 0 and similarly w
n
> 0 implies v
n
= 0.
Finally, if there is a limit W
n
on the amount we can borrow at time n then the bound on
n
is
modied to
(1 +r
l
)
n+1

n
(1 +r
b
)
n+1
+
n
,
where
n
is the dual variable corresponding to the constriant w
n
W
n
.
So far we have avoided the issue of integer solutions in capital budgeting problems. The reason
for this is that the LP solution, and its dual, is a useful tool to set budget limits. Once the budget
limits are rmly set, we can no longer accept solutions with fractionally accepted projects. Notice
that the LP formulation of the basic horizon model with equal borrowing and lending rates always
admits an optimal integer solution. This is because, under this formulation, all projects with positive
present value are accepted. Thus, the integrality constraints are of no concern when the borrowing
and lending rates are equal. This is not the case, however, when the borrowing and lending rates
are dierent, so more work is required to nd an optimal integer solution. One technique that is
commonly used to solve integer programs is called Branch-and-Bound. The technique starts with an
optimal solution, say x
, z
for the linear program. Here x
represents the project selection vector,

and z
is the value of the objective function. If all the components of x
are either zero or one we

are done. Otherwise, we pick a component, say j, of x
such that x
j
is fractional and create two
subproblems, one with x
j
= 0 added as a constraint, and another with x
j
= 1 added as a constraint.
We then proceed to solve these subproblems by an LP algorithm. For each of the subproblems,
we repeat the procedure of identifying a fractional component, if such exists, and of creating new
subproblems by adding constraints setting the fractional variable to zero and to one. This is the
branching part of the algorithm. Conceivably we could follow the branches out of each subproblem
until all the components are zero or one, and then pick the integer solution with the largest objective
value. But this is working too hard! A better way is to record the solution of the subproblems and
the corresponding value of the objective function. Remember that the value of the objective function
of an LP solution is an upper bound on the value of the objective function of an optimal integer
solution. If at any point we nd that the LP solution of a subproblem has an objective value that
is smaller than a previously obtained integer solution, we know immediately that we need not look
any further into this branch. This is sometimes called fathoming the branch. This is the bound part
of the algorithm. Dierent implementations of branch and bound dier in the way they look at
the branches. The most common is depth rst search in which a branch is followed until an integer
solution is obtained, or until the branch can be fathomed.
Notes on Chapter 9: Utility Theory
At the beginning of the course I asked the class to select between $10 for certain, and the
opportunity of earning $25 with probability 50%. Most of the class recognized that the gamble is
better in expectation, and the majority decided to take the risk. However, when I scaled the stakes
so that the choice was between $1,000,000 for certain, and an opportunity to earn $2,500,000 with
probability 50%, most of you took the $1,000,000 inspite of the fact that the gamble had a higher
expectation.
To further illustrate this behavior, consider the following game. A fair coin is tossed until the
rst time a head occurs. If it takes n tosses to obtain the rst head the payo to the player is $2
n
dollars. The probability that it will take n tosses to obtain the rst head is
1
2
n
. Consequently, the
expected payo is
n=1
2
n
2
n
=
n=1
1 = .
We have shown that this game has an expected reward equal to plus innity. What is the maximum
amount that you would be willing to pay to play this game?
Why is it, that rational people do not always act to maximize expected rewards? One explanation
is that many opportunities can only be taken once, so that we do not have a chance to observe the
expected value. This is true, but it does not account for the fact that scale eects may reverse
decisions as in the rst example above.
Economist have tried to account for this behavior by postulating that decision makers are risk
averse. A risk averse individual will always prefer less risk, and he may even pay a premium to
reduce the risk. A homeowner that takes re insurance is risk averse because he knows that he
is being charged more than the expected cost of repairing his home. Those of you who prefer a
$1,000,000 for certain than a gamble that pays $2,500,000 with probability one half are also risk
averse. One diculty with this theory is that it does not explain why people who are risk averse are
willing to bet in a casino where the odds are against them. One explanation is that most risk averse
individuals will only bet relatively small amounts and they see the expected losses from playing as
a random cost for their entertainment.
To make things formal, two famous economist, Von Neumann and Morgenstern, came up with a
set of axioms of behavior that lead to the existence of a utility function. Once the utility function
has been found, they claim, the decision maker can make decisions based on maximizing expected
utility.
Risk averse investors have an increasing concave utility function. For example, u(x) = ln(x) and
u(x) =
x are two example of increasing concave utility functions. The increasing concavity reects
a decreasing incremental value from each incremental dollar of wealth.
If X is a random variable, and u() is the utility function, then the expected utility is
Eu(X).
By Jensens inequality, we know that if u() is concave, then
Eu(X) u(EX).
This means that an individual with a concave utility function u(), would prefer to have EX, for
certain, than to face the random variable X. In other words, the individual will take less than EX
for certain, rather than facing X. The exact amount that they will take for certain is called the
certainty equivalent, CE. This quantity is dened by
u(CE) = Eu(X),
or by
CE = u
1
(Eu(X)) .
Notice that CE is well dened if u() is increasing, since u() can be shown to be continuous. The
dierence between EX and CE is called the risk premium. For example, if X is a random variable
taking value $0 with probability 0.5, and $1,000,000 with probability 0.5 then EX = $500, 000. If
u(x) =
x, then
Eu(X) = $500 =
CE,
so CE = $250, 000, and the risk premium is RP = EX CE = $250, 000. In this example, the
investor would prefer to take any amount larger or equal to $250,000 than the random variable X
which has expectation $500,000.
Homework: What is the expected utility of the coin tossing game if the utility function is u(x) =
b ln(x/a)? What is the certainty equivalent? Does it depend on a, and b?
It is clear that the shape of the utility function depends on the initial wealth. Buying re
insurance on a $250,000 house makes more sense for an individual with a net wealth of $250,000,
than for an individual with net wealth of $10,000,000. The latter can probably aord self insurance.
To measure the degree to which risk averseness depends on wealth, W, economist have come up
with the risk aversion function
r(W) =
u
(W)
u
(W)
which is dened for utility functions with rst and second derivatives. It is clear that u
(W) > 0,
since we have postulated u() to be increasing. As W increases, we would expect u() to atten
out, so r(W) would decrease. If this is the case, then we say that the individual has decreasing risk
aversion. For example, if u(W) = ln(W), then r(W) = 1/W, and r
(W) < 0, so an individual with

utility function u(W) = ln(W) is risk averse, with decreasing risk averseness. It can be shown that
an individual with such a utility function, pays a decreasing risk premium as his wealth increases.
An individuals utility function, and his behavior can sometimes tell us something about his
subjective probability distribution of a random variable. For example, suppose an individual with
initial wealth of $100,000 has a utility function u(x) =

x and is willing to bet $10,000 on a ball
game. Let p be his probability of winning. If he wins his wealth will be $110,000, if he losses his
wealth will be $90,000. Since he prefers to bet, then
p
_
110, 000 + (1 p)
_
90, 000
_
100, 000,
so
p
100, 000
90, 000
110, 000
90, 000
= 51.25, %
so his subjective probability of winning must be at least 51.25%.
Suppose that an individual has initial wealth W, and an increasing concave utility function u().
He is concerned about a catastrophic event that can occur with probability p, and would cause him
a loss of a dollars. What is the maximum amount that this individual would be willing to pay for
an insurance that will cover his losses if the catastrophic event occurs? Let us assume that cost of
insurance is b dollars. If he takes insurance, his wealth will be Wb, whether the catastrophic event
occurs or not, and the utility that associate with such an action is simply u(W b). If he does not
take insurance, then he faces a random variable taking value W a with probability p, and value
W with probability 1 p. The expected utility of this action is pu(W a) + (1 p)u(W). If the
individual acts to maximize his expected utility then he will take insurance as long as
u(W b) pu(W a) + (1 p)u(W),
or equivalently as long as
b W u
1
(pu(W a) + (1 p)u(W))
.
=

b.
We conclude that the maximum amount that the individual will pay is

b.
Homework: Show that if u() is concave then

b > pa. 2.
Example: Let W = $1, 000, 000, a = $200, 000, p = 0.005, and u(x) =
x. Then

b = $1, 055.45.
Homework: Compute

b for W = $200, 000, and for the W = $10, 000, 000. 2.
By solving the homework problem, you will nd that as the wealth of the individual increases,
the maximum amount that the individual is willing to pay for insurance decreases. This is true
for the class of utility functions satisfying r
(W) < 0 for all W > 0. At certain level of wealth, the

maximal amount that the individual is willing to pay for insurance will not be enough to cover the
insurance company operating costs. Thus, above this level of wealth, the individual will prefer not
to take full coverage.
Now suppose that the individual is allowed to take partial coverage at a premium of r dollars
per dollar insured. If the individual decided to take B dollars of coverage, the insurance company
will collect rB, but will have to pay out B dollars if the catastrophic event occurs. If the insurance
company is to make a prot, it is necessary to have
p(rB B) + (1 p)rB = B(r p) > 0,
so r > p. Given r > p, the individual must decide how much coverage to buy. If he buys B dollars
of coverage, then his wealth will be equal to W Br if the catastrophic event does not occur, and
will be W Br a +B if the catastrophic event occurs. His expected utility, as a function of B, is
g(B)
.
= pu(W Br a +B) + (1 p)u(W Br).
The problem is to maximize g(B) over the region 0 B a. It can be shown that g() is concave.
If there is an interior point, say B
, satisfying g
(B
) = 0, then B
is optimal. Taking the derivative

of g() and equating it to zero results in
u
(W Br a +B)
u
(W Br)
=
r(1 p)
p(1 r)
> 1.
From this, it is clear that if g
() vanishes at B
, then
u
(W B
r a +B
) > u
(W B
r),
but then, because u() is concave, u
() must be decreasing, so that

W B
r a +B
< W B
r.
From this analysis, we conclude that
B
< a
for all increasing concave utility functions, and for all W, a, r > p. This implies, that for all levels
of wealth, and for all increasing concave utility functions, it is never optimal to take full insurance.
Example: Let W = $1, 000, 000, a = $200, 000, p = 0.005, r = 0.0051, and u(x) =

x. Then the
optimal coverage B
satises
1000000 0.0051B
800000 + 0.9949B
=
(0.0051)(0.995)
(0.005)(0.9949)
,
by solving, we nd that the optimal coverage is B
= $161, 007.63.
Homework: Compute B
for W = $200, 000, and for the W = $10, 000, 000. 2.

Suppose that an investor has utility function u(), and acts to maximize his expected utility.
Then, the investor will prefer the random portfolio X to the random portfolio Y, if and only if
Eu(X) > Eu(Y ). Notice, that this choice is not altered if his utility function is replaced by au()+b,
with a > 0; hence utility functions are equivalent up to ane transformations. By taking a =
EX
u(EX)
,
and b = 0, if necessary, we can assume without loss of generality that u(EX) = EX
.
= . Expanding
the utility function around , we obtain
u(x) + (x )u
() + 0.5(x )
2
u
().
Now, for any portfolio Y with mean EY = , we have
Eu(Y ) + 0.5u
()V ar(Y ).
Based on this second order approximation, the decision maker prefers the random portfolio X to Y,
if
0.5u
()V ar(X) > 0.5u
()V ar(Y ).
If the investor is risk averse, he will prefer X to Y, with EX = EY if V ar(X) < V ar(Y ). This result
is part of what is called mean-variance analysis. In words, risk averse investors prefer the portfolio
with the smallest variance among all portfolios with the same expected return. Hence the variance
and its square root, the standard deviation, are taken to be measures of risk.
The other part of the mean-variance analysis, states that all investors will prefer the portfolio
with the highest expected return among all portfolios with the same variance. This part of the mean
variance is less transparent than the rst, yet it can be derived without making any assumption
on the sign of the second derivative of u(). Let
x
= EX,
y
= EY, and assume that V ar(X) =
V ar(Y ) =
2
. Now, expanding the utility function around
.
= 0.5(
x
+
y
), we nd that
Eu(X) u() + (
x
)u
() + 0.5(
2
+ (
x
)
2
)u
(),
notice, that by the choice of , the last term vanishes when we take the dierence of the expected
utility, so
Eu(X) Eu(Y ) u
()(
x
y
).
Thus, since u
() > 0, this second order approximation indicates that Eu(X) > Eu(Y ) if
x
>
y
.
To summarize, a second order approximation of the utility function indicates that risk averse
investors will select the portfolio with the smallest variance among all portfolios with the same mean,
and that all investors will select the portfolio with highest return among all portfolios with the same
variance.
The above is helpful in comparing portfolios with the same variance, and portfolios with the same
expected return. More generally, we can ask for the set of portfolios that have the same expected
utility as measured by the second order approximation. Plotting the set we obtain iso-utility curves
in the mean-variance space, or in the mean-standard deviation space. This iso-utility curves have a
positive slope indicating that a higher return is necessary to compensate a higher risk.
Notes on Chapter 10: Measures of Investment Worth Under Risk
We have discussed ways of computing means and variances of functions of random variables, i.e.,
weighted sums, products and quotients. Once we obtain the mean and the variance, we can make
some probabilistic statements about the random variable in question. To be more precise, if X is a
random variable with mean and variance
2
, and that is all we know about X, then we can state
the following three inequalities:
Pr{|X | k}
1
k
2
,
Pr{X k}
1
1 +k
2
for k 0,
and
P(X +k)
k
2
1 +k
2
for k 0.
These inequalities are due respectively to Tchebyche, Cantelli and Marshall. If the X 0, we have
Markovs inequality
P(X )

.
If in addition, it is known that the distribution of X can be written as F(x) =
_
x
f(s)ds for
x < , and F(x) = F()+
_
x
f(s)ds for x , with f() non-decreasing on x < , and non-increasing

on x > , then Tchebyches inequality can be sharpened to yield Gausss inequality:
Pr{|X | k}
4
9k
2
,
for k
_
4/3, and to
Pr{|X | k} 1
k
3
,
for k
_
4/3.
Notes on Chapter 11: Methods for Comparing Risky Projects
We have already discussed mean-variance analysis in the context of utility theory. The two
mean-variance rules are: (i) Select the project with the lowest variance among projects with the
same expected return, and (ii) Select the project with the largest return among projects with the
same variance. Recall that both rules were obtained by approximating the utility function by its
second degree Taylor expansion, under the assumption that individuals act to maximize expected
utility. Rule (i) was established under the additional assumption of risk averseness, while rule (ii)
did not require risk averseness.
If we have a set of projects under consideration, and we plot their means and their variances,
we will be able to use rules (i) and (ii) to eliminate some of the projects. Those, that we cannot
eliminate are said to lie in the ecient frontier. The ultimate choice between projects in the ecient
frontier depends on the tradeo between risk and reward for the decision maker. A very conservative
decision maker will not be willing to take substantial additional risk to increase the expected return,
so he will tend to select low return, low variance projects in the ecient frontier. In contrast, a
more aggressive investor will be willing to incur substantial additional risk to increase the expected
return, so he will tend to select high return, high variance projects in the ecient frontier. If the
utility function of the investor is known, then the decision maker selects the project with the largest
utility function. Graphically, this is the project that intersects the largest iso-utility curve.
Recall that
2
= E(X )
2
, as such the variance is a measure of risk that penalizes deviations
from the mean value on both directions. The semi-variance is an alternative measure of risk that
penalizes deviations below a certain value h. The semi-variance S
h
is dened to be
S
h
= E[(X h)
]
2
,
where values below h are considered bad. Typical values of h are 0 and . Not surprisingly, the
knowledge of the semi-variance may help us reach a decision where the mean variance analysis does
not. For example selecting between Project 6 with mean 2 and variance 176, and Project 7 with
mean 28 and variance 356 in Chapter 11 is not possible by the rules of mean variance analysis.
However, once we realize that all of the variance of Project 7, is good variance, and measure risk
through the semi-variance we see that Project 7 dominates Project 6 under the mean semi-variance
rules. The mean semi-variance rules are similar to the mean variance rules except that the semi-
variance is used instead of the variance as a measure of risk. Notice that there is no theoretical
justication for these rules.
A third criterion, called the safety-rst criterion favors the alternative with the smallest proba-
bility of loss, where loss is usually dened as a negative PV or as an IRR below MARR.
The above criteria often do not indicate a clear choice among competing alternatives. A concept
that is useful to decide among competing alternatives is called stochastic dominance. Several types
of stochastic dominance exist. The denition of rst degree stochastic dominance is given next.
Given two random variables X and Y with probability functions F() and G(), we say that
XDY (X dominates Y ) or FDG [F dominates G], if
Eu(X) Eu(Y )
for every non-decreasing function u() for which the expectation exists and if the inequality is strict
for at least one non-decreasing function u().
Suppose that X and Y represent the outcomes of two projects. Since decision makers act to
maximize expected utility it is clear X is preferred to Y, if Eu(X) Eu(Y ). Thus, to say that X
dominates Y is to say that all decision makers having non-decreasing utility functions will prefer X
to Y.
The above is a strong statement, because it essentially says that all decision makers (with nonde-
creasing utility functions) prefer X to Y. An example of rst degree stochastic dominance is given by
Projects 2 and 3 in Chapter 11. Letting PV
2
and PV
3
denote the random present value of projects
2 and 3 respectively, we can write
Eu(PV
3
) = Eu(PV
2
) + 0.1 (u(20) u(10)) Eu(PV
2
).
Notice that the above holds for all nondecreasing utility functions. So all investors with nondecreas-
ing utility functions will prefer Project 3 over Project 2. Notice that the mean-variance analysis was
not capable of deciding between Projects 2 and 3.
While the condition dening rst degree stochastic dominance has an intuitive interpretation,
it is not always easy to verify it directly because it involves the set of all non-decreasing functions
u(). Fortunately, checking XDY [FDG] can be done directly, just by looking at the cumulative
distribution functions. Indeed, a necessary and sucient condition is that
F(x) G(x) x,
and that strict inequality holds for at least one value of x.
To see that this is true, one rst shows that F(x) G(x) implies EX EY, and then show
that F(x) G(x) implies F(u(x)) G(u(x)) for all non-decreasing functions u(). Consequently,
F(x) G(x) implies Eu(X) Eu(Y ) for all non-decreasing function u() for which the expectation
exists. Conversely, if Eu(X) Eu(Y ) for all non-decreasing u() for which the expectation exists,
we take u(x) = 1{x > a} and obtain
1 Pr{X a} = Pr{X > a} = Eu(X) Eu(Y ) = Pr{Y > a} = 1 Pr{Y a},
so we conclude that F(a) G(a), a.
As mentioned before, rst degree stochastic dominance is a very strong condition, and it is by
no means true that XDY or Y DX will hold. In fact, in most cases neither condition holds. One
way of enlarging the class of projects for which a dominance relationship holds is to reduce the
set of functions u(). A meaningful subclass of the class of non-decreasing functions, is the class of
non-decreasing concave functions. Given two random variables X and Y with probability functions
F() and G(), we say that XD
2
Y (X dominates Y ) or FD
2
G [F dominates G], if
Eu(X) Eu(Y )
for every non-decreasing concave function u() for which the expectations exists, and if the inequality
is strict for at least one non-decreasing concave function u(). Again, while the denition of second
degree stochastic dominance is intuitively appealingXD
2
Y if and only if all decision makers with
an increasing concave utility function prefer X to Y it is dicult to check the condition directly.
However, an alternative denition states that we can establish XD
2
Y or [FD
2
G] by looking into
the areas under the cumulative distribution functions. Indeed, a necessary and sucient condition
is that
_
x
F(s)ds
_
x
G(s)ds x,
and that strict inequality holds for at least one value of x.
A good example that motivates and illustrates second order stochastic dominance is to compare
Projects 3 and 4 in Chapter 11.
Portfolio Theory
Portfolio theory is a popular topic in nance. The problem is to allocate a xed sum of money
among a set of securities, such as stocks and bonds, to create an ecient portfolio. A portfolio is
said to be ecient, in the mean-variance sense, if it is not possible to form another portfolio with
the same expected return and smaller variance, or a portfolio with the same variance and larger
expected return. Portfolio theory was developed in the 1950s by H. Markowitz. The main tool
used in portfolio theory is quadratic programming, where given the rst and second moments of the
securities, and a desired expected return one seeks to nd a minimal variance portfolio. Markowitz
recently received a Nobel prize in Economics for his work on portfolio theory.
Let R
j
be the random annual return on a dollar invested in security j = 1, . . . , J. Formally,
one obtains R
j
by computing the ratio of the dividend per share plus the increase per share to the
previous share value. Let
j
, and
2
j
, denote respectively the mean, and the variance of the return
on security j = 1, . . . , J, and let
jk
denote the correlation of securities j and k. See example 11.8.
Let x
j
denote the number of dollars invested in security j = 1, . . . , J. Then our portfolio will
have a random return equal to
R =
J
j=1
x
j
R
j
,
with mean
E(R) =
J
j=1
x
j
j
and variance
V ar(R) =
J
j=1
x
2
j
2
j
+ 2
j<k
x
j
x
k
jk
k
.
Markowitzs quadratic program can be written as:
min
x
J
j=1
x
2
j
2
j
+ 2
j<k
x
j
x
k
jk
k
s.t.
J
j=1
x
j
j
rB,
J
j=1
x
j
B,
0 x
j
j,
where r is the minimal desired return, and B is the budget to be allocated. Most formulations take
advantage of the fact that both the objective and the constraints are homogeneous of degree 1, so
we can assume without loss of generality that B = 1. With B = 1 we are essentially asking how to
allocate $1 dollar among the securities. If we have B > 1 dollars to invest, then we just scale the
allocations.
As presented above the model requires
J
2
+3J
2
estimates of means, variances and covariances.
The amount of historical data that is required to accurately estimate these parameters is enormous.
Thus, the original formulation can only be used to allocate portfolios among a small set of securities
for which the parameters can be accurately estimated. More frequently, the portfolio model is used
to allocate money among classes of securities, rather than among securities themselves. For example,
the model may be used to decide how to allocate money among stocks, bonds, and money market
accounts.
A dierent version of the above model, called the index model, uses a market index to estimate
j
,
2
j
, and
jk
. The index mode postulates that
R
j
= A
j
+B
j
I +C
j
, j,
where A
j
and B
j
are constants, I is a random market index, and C
j
is a random error. Thus, the
index model postulates that the return of security j is linearly related to the performance of the
market index I. Let A
J+1
, and Q
J+1
denote the expectation and the variance of the random index
I. The random errors are assumed to have mean zero and variance Q
j
.
= V ar(C
j
) j = 1 . . . , J. Using
the above notation, we obtain
j
= E(R
j
) = A
j
+B
j
A
J+1
, j = 1, . . . , J,
2
j
= V ar(R
j
) = B
2
j
Q
J+1
+Q
j
and
cov(R
j
, R
k
) = B
j
B
k
Q
J+1
.
Then our portfolio R =

J
j=1
x
j
R
j
has mean
E(R) =
J
j=1
x
j
A
j
+
_
_
J
j=1
B
j
x
j
_
_
A
J+1
and variance
V ar(R) =
J
j=1
x
2
j
Q
j
+
_
_
J
j=1
B
j
x
j
_
_
2
Q
J+1
.
Notice that the index model requires only 3J +2 estimates. The index model is much easier to solve,
and it provides a reasonable approximation to the full covariance model. It is of course possible to
consider models with two rather than one index, e.g., gross national product, and the number of
house starts.
In selecting a portfolio of securities, one generally has the opportunity to invest part of ones
funds in a risk free asset such as US Treasury securities, with the rest of the funds being invested in
some risky portfolio. Let R
f
be the return of the risk free security. We assume that R
f
is a known
constant. If we invest a fraction of our wealth in the risk free security, and the fraction 1 in
portfolio with random return R
m
, the combined security is:
R
c
= R
f
+ (1 )R
m
.
This security has expected return
c
= ER
c
= R
f
+ (1 )
m
,
and variance
2
c
= V ar(R
c
) = (1 )
2
2
m
.
Thus, by selecting the fraction , we can control the risk
2
c
of the combined portfolio. For any
value of
2
c
we nd
= 1

c
m
,
and for that , we obtain the expected return
c
= R
f
+

m
R
f
c
. (1)
Given R
f
,
m
, and
m
, the above equation for the expected return,
c
, is linear function of the
associated with the risk level
c
.
Since we want to obtain the largest possible return at any level of risk, it is clear that we would
select the risky portfolio m, that maximizes the slope
m
R
f
m
.
Such a portfolio is called the market portfolio, and the associated linear equation (1) is called the
Capital Market Line (CML).
Any risk averse decision maker will select the point where his iso-utility curve is tangent to the
CML. That means that all risk averse investors will allocate part of their money to the risk free
security and the other part to the market portfolio. If the iso-utility curve is tangent to the CML to
the right of the market portfolio, the investor will be willing to borrow money at the risk free rate
R
f
and invest it, together with his own money in the market portfolio. Thus portfolios to the right
of the market portfolio involve borrowing, while portfolios to the left of the market portfolio involve
lending.
From the capital market line, we see that
c
R
f
c
=

m
R
f
m
,
the above ratios are called reward to volatility ratios.
Virtually any individual can invest at the risk free rate. However, most investors cannot borrow
at the risk free rate. This requires a modication of the above to incorporate dierent rates for
borrowing and the separation of the risk return decision; the risky-investment decision does not hold
any longer over the entire mean-standard deviation space. However, it continues to hold over some
region of the mean-standard deviation space.
What happens if we combine a risky security, say R
j
, with the market portfolio? We obtain a
new portfolio
R
p
= R
j
+ (1 )R
m
.
Then
p
=
j
+ (1 )
m
,
and
2
p
=
2
2
j
+ 2(1 )
jm
+ (1 )
2
2
m
.
We see that
=
j
m
,
and that
=

jm
2
m
m
,
at = 0. Consequently,
p
=
(
j

m
)
m
jm
2
m
=

m
R
f
m
.
Solving for
j
we obtain
j
= R
f
+(
m
R
f
)
where
=

jm
2
m
.
The above model, called the capital asset pricing model, can be used to price out securities by
comparing the actual to the predicted expected returns.
I like to write the CAPM as
j
= R
f
+

m
R
f
j
R
f
+

m
R
f
j
,
where
j
is the correlation between security j and R
m
, i.e.,
j
=
jm
/(
j
m
).
The Average Downside Risk Model
An alternative portfolio selection model that is popular is the so called average down side risk
(ADR) model. Here R
ij
represents the return of security j = 1, . . . , J under scenario i = 1, . . . n.
Scenario i occurs with probability p
i
> 0, with

n
i=1
p
i
= 1. Given a portfolio x = (x
1
, . . . , x
J
) of
nonegative weights summing to one,
J
j=1
x
j
= 1, the return under scenario i by computing
R
i
=
J
j=1
x
j
R
ij
.
The expected return of the portfolio is given by
R =
n
i=1
p
i
R
i
.
The downside risk under scenario i is DR
i
= max(R
i
, 0) and the average downside risk is ADR =
n
i=1
p
i
DR
i
. The formulation calls for minimizing the ADR subject to a constraint on the return.
The down side risk, and the average down side risk, as currently dened, are piecewise linear func-
tions. To convert this into a linear function, we relax the above denition of DR
i
and make DR
i
a decision variable satisfying the constraints DR
i
0 and DR
i
+ R
i
0. This relaxation results
in a linear program, and since we are minimizing the optimal solution will always have DR
i
= 0 if
R
i
0 and DR
i
= R
i
if R
i
< 0.
Chapter 12: Risk Simulation
For many complex problems, for which analytic techniques are hard to apply, simulation provides
a convenient alternative. Simulation, provides an easy way to combine the necessary probabilistic
distributions -and in some cases the only possible way.
For example, if the Cash Flow in a given period is a function of a number of random variables such
as selling prices, size of the market, investment required, ination rate, etc., so that it is dicult or
impossible to nd the distribution of the Cash Flow, we may resort to simulation to answer questions
such as: What is the probability that the Cash Flow is greater than zero?
We will give only sucient detail to present the major aspects of the method and how it can be
applied to investment analysis.
Monte Carlo Sampling. Suppose you are interested in the present value:
PV = F
0
+
F
1
1 + i
+
F
2
(1 +i)
2
.
If we can express the random variables by probability distributions, we can simulate the actual
state of nature by sampling the state of each random variable from its specic distribution, and
then compute the value of PV. These computations are repeated until a sucient number of PV
values is available to tabulate its distribution. Three questions arise: (i) How to sample values of
the random variables?, (ii) How many repetitions are required?, (iii) What happens if the variables
are correlated? We will address these questions later.
Using the Simulation Output. For a single project, we can construct estimates of
Pr(PV x),
For multiple projects, we can construct estimates of
Pr(PV
A
PV
B
),
or for any , we can compute
Pr(PV
A
PV
B
).
Selecting Input Probability Distributions
To carry out a simulation, we have to specify the probability distribution of the inputs, then the
simulation proceeds by generating values of these random variables from appropriate distributions.
If past data is available, we can either (i) t a theoretical distribution, or (ii) use the empirical
distribution. To t a theoretical distribution, we need to select a distribution, t the data, and test
for goodness of t. See pp 501-507 for a t to the Gamma distribution.
If data is not available, then the decision maker is asked to select three values of the random
variable: L, M, H. These values are low, most likely, and high, and are educated guesses made by the
decision maker. The low value is selected so that in 95% of the realizations of the random variable
will be above L. Similarly, the high value is selected so that 95% of the realizations of the random
variable will be below H. Finally, M is selected to be the most likely value of the random variable.
Once, L, M, H are obtained, several distributions can be used to t L, M and H. Two distributions
that are easy to t, are the triangular, and the beta distributions. See pp 508-509.
Sampling Procedures for Independent Random Variables
To draw values of the random variable, one rst draws a value, say u, from the uniform U(0, 1)
distribution, and then computes
F
1
(u)
.
= inf{x : F(x) y},
where F is either the theoretical or the empirical distribution. Note: It can be shown that X
.
=
F
1
(U) is a random variable with cumulative distribution F. So, if u
1
, . . . , u
n
are n values of U,
then x
1
= F
1
(x
1
), . . . , x
n
= F
1
(x
n
) are values n values of X.
Example:
Suppose X has an exponential distribution with parameter . Then
P(X x) = 1 e
x
,
so U = 1 e
X
. Solving for X, we obtain
X =
1
ln(1 U) =
1
ln(W),
where W is also uniform (0, 1). Suppose = 5, and that we draw w
1
= 0.32, w
2
= 0.76, w
3
= 0.59
then x
1
=
1
5
ln(0.32), x
2
=
1
5
ln(0.76), x
3
=
1
5
ln(0.59).
We can generate a normal random variable X, with mean , and variance
2
by rst writing X
as
X = Z +,
where Z is a standard normal random variable. So
X =
1
(u) +,
where () is the cumulative distribution of the standard normal random variable, and u is a value
drawn from a uniform (0, 1) random variable. Other ways of generating Normal, and other distrib-
utions, are discussed in pp 514.
Sampling Procedures for Dependent Random Variables Suppose that X and Y are two
random variables that are statistically dependent on each other. Dependency can be checked, for
example, by looking at a cross plot of (X, Y ), to observe if there are underlying trends. The problem
is to generate representative pairs of (X, Y ). This can be done, if we know the distribution of X, say
F(), and for each realization X = x, we know the distribution of Y |X = x, say F
Y |X=x
(). Then,
(F
1
(U
1
), F
1
Y |X=F
1
(U1)
(U
2
))
is a pair of random variables with the appropriate distribution where U
1
and U
2
are uniform (0, 1)
random variables. Other methods of generating dependent random variables are discussed in section
12.5 of the book.
Output Data Analysis How close is an estimator to its true measure? Suppose Y is a random
variable with mean , then
= lim
n
1
n
n
j=1
Y
j
w.p. 1
where Y
j
, j = 1, . . . n, are n replications of Y. When to stop? Well, suppose that we repeat the
experiment m times, the k
th
replication yielding
Y
k
=
1
n
n
j=1
Y
kj
.
Then the

Y
k
s are i.i.d. random variables. Let
Y =
1
m
m
k=1
Y
k
,
and
S
2
=
1
m1
m
k=1
(
Y
k

Y )
2
,
and =
S
m
. Then a 100(1 )% condence interval for based on the t distribution is given by:
Y t
/2,m1

Y +t
/2,m1
.
Homework: Airline companies typically open a ight t units of time before the schedule depar-
ture time; t is typically one year. Assume that the plane scheduled for the ight has n seats, and
that seats are initially oered at a promotional fare of p
1
dollars. After some time the promotional
fare is phased out and the remaining seats are priced at the regular fare p
2
> p
1
.
Assume that at fare p
i
, the demand over s units of time, say N
i
(s), is a Poisson random variable
with parameter
i
s, i = 1, 2, with p
1
1
> p
2
2
, and
1
t > n >
2
t. Our objective is to maximize
expected revenue by selecting the best time to switch from the promotional to the regular fare. Two
policies, to be described below are being considered. Your job is to simulate the two policies and to
use the outcome of the simulation to decide which policy is better.
Policy 1. Is to keep the promotional fare until the rst time s [0, t] such that
N
1
(s) +
2
(t s) n.
In words policy 1 says to phase out the promotional fare as soon as we expect to ll the remaining
seats at the regular fare. To see this, note that at time s, there are n N
1
(s) remaining seats, and
over the remaining t s units of time, the expected demand at the regular fare is
2
(t s).
Policy 2. After the sale, say at time s, of a seat at the promotional fare, we decide to keep the
promotional fare until the next seat is sold if
p
1
Pr(N
1
(t s) n N
1
(s)) p
2
Pr(N
2
(t s) n N
1
(s))
and to phased out the promotional sale otherwise.
Your code should run in either Pascal, Gauss or C. It should allow the user to input the values
of p
i
,
i
, N and T. However, for purposes of the output analysis, you should use the following data:
T = 360, N = 250,
1
= 1.25,
2
= 0.5, p
1
= $200, and p
2
= $400.
Hint: To set up the simulation initialize t = 0, R = 0, N
1
= 0, N
2
= 0, =
1
, p = p
1
.
(i) At time t generate an exponential random variable by drawing
E =
1
ln(W)
where W is a uniform (0, 1) random variable.
(ii) If t +E > T, or N
1
= n stop. Else update the variables by
t := t +E, R := R +p, N
1
:= N
1
+ 1.
(iii) If the phase out condition for the low fare has not been met go to step(i),
(iv) Set
=
2
, p = p
2
.
(v) At time t generate an exponential random variable by drawing
E =
1
ln(W)
where W is a uniform (0, 1) random variable.
(vi) If t +E > T, or N
2
= n N
1
stop. Else update the variables by
t := t +E, R := R +p, N
2
:= N
2
+ 1,
and go to (v).
At the end of the simulation, N
1
is the number of seats sold at the promotional fare, N
2
is the
number of seats sold at the regular fare, and R = p
1
N
1
+p
2
N
2
is the total revenue. For both policies,
you should report R, N
1
, and N
2
.
Chapter 13: Decision Analysis
Decision analysis is a commonly used technique for multi-stage decision problems. Let r(a, w)
denote the reward associated with a certain action a A, chosen by the decision maker, and certain
state of nature w , not known to the decision maker at the time he/she makes the decision. It
is assumed that is a nite or countable set, and that a probability mass function p(w) w is
well dened. Given any action a A, the expected reward is given by
r(a) =
w
r(a, w)p(w).
Of course, if our objective is to maximize the expected monetary value we simply select a to maximize
r(a). So
EMV = max
aA
r(a).
If we had perfect information, that is, if we knew w before selecting a A, we would clearly act
to select a to maximize r(a, w) for every w . Thus, the expected monetary value under perfect
information, EMVPI, is
EMVPI =
w
p(w) max
aA
r(a, w).
The EMVPI is an upper bound on EMV, and the dierence is called the maximal value of additional
information MVAI. Thus,
MVAI =
w
p(w) max
aA
r(a, w) max
aA
w
r(a, w)p(w).
Typically decision makers collapse the states of nature into three broad states: poor (p), moderate
(m), and good (g). Thus r(a, p) is the reward obtain by selection action a if the state of nature is p.
Suppose that this is the case, and that a consultant is hired to do a study. At the end of the study, the
consultant will predict favorable (f), inconclusive (i), or unfavorable (u) conditions. In order to asses
the value of the study, we need to know how good the consultant is in predicting the states of nature.
Suppose that from past history you know the conditional probabilities p(f|g), p(f|m), . . . , p(u|p).
That is for every state of nature you know the probability that the consultant will report f, i, or u.
By Bayes theorem, we can compute the conditional probabilities p(g|f), p(g|i), p(g|u), . . . , p(p|u), as
well as the probabilities p(f), p(i), and p(p). For example,
p(g|f) =
p(f|g)p(g)
p(f|g)p(g) +p(f|m)p(m) +p(f|p)p(p)
.
Given these conditional probabilities, we can compute the conditional rewards associated with
each action a A. Thus
r(a|f) = r(a, g)p(g|f) +r(a, m)p(m|f) +r(a, p)p(p|f).
The rewards r(a|i), and r(a|u) can be similarly computed. Of course, for each possible outcome of
the study, we select the action a A, that maximizes r(a|). To obtain the expected monetary value
taking the study, EMVS, we compute
EMVS = max
aA
r(a|f)p(f) + max
aA
r(a|i)p(i) + max
aA
r(a|u)p(u).
Where p(f), p(i), and p(p) are the probabilities that the study predicts f, i, and p. The value of the
study is then
EMVS EMV.
See the Retail Convenience Store Problem, page 552 of textbook.
The Wait and See Option
So far we have ignored from consideration the possibility of postponing the investment decision.
To illustrate why this is an important option we will introduce a simple example where waiting may
be the best option. Let I be the cost of investing on a widget factory. We assume an ination-free
scenario, so that if we wait an invest a year from now the cost will still be I. Let i be the ination-
free interest rate, and assume that investing in the widget factory results in the revenue stream
{P
o
, P
1
, P
2
, . . .} where P
n
= 1.5P
o
, n = 1, . . . with probability q and P
n
= 0.5P
o
, n = 1, . . . with
probability 1 q. Suppose we must make the decision at time 0. Assume further that the price of
the widget is uncorrelated with the market so that discounting the expected value of the cash ow
at the risk-free rate makes sense. Then, the expected net present value is given by
ENPV
0
= I +P
o
+q1.5P
o
n=1
(1 +i)
n
+ (1 q)0.5P
o
n=1
(1 +i)
n
= I +P
o
_
1 +q
1.5
i
+ (1 q)
0.5
i
_
.
The NPV criterion is to invest if this quantity is positive, that is, if
I P
o
_
1 +q
1.5
i
+ (1 q)
0.5
i
_
.
For example, if P
o
= 200, q = 0.5, i = 10% and I = 1600 we have
ENPV
0
= 1, 600 + 2, 200 = 600.
More generally, it is optimal to invest now whenever
I 2200.
Now consider the option of waiting for one year. The net present value of investing at the end
of year one is
1.5P
o
i

I
1 +i
if the price goes up and
0.5P
o
i

I
1 +i
if the price goes down. Clearly, we would only make the investment if the resulting value is positive.
So the expected net present value when we wait is given by
ENPV
w
= q
_
1.5P
o
i

I
1 +i
_
+
+ (1 q)
_
0.5P
o
i

I
1 +i
_
+
where x
+
= max(x, 0). Of course, the optimal decision is to wait only when the expected value is
larger than investing now. Consequently, the optimal expected net present value is given by
ENPV
= max(ENPV
0
, ENPV
w
).
To illustrate, let us continue with our numerical example with P
o
= 200, q = 0.5, and i = 10%.
For values of I ($1, 100, $3, 300] we have
ENPV
w
= 0.5
_
3000
I
1.1
_
= 1500
I
2.2
.
Comparing to 2200 I we see that ENPV
w
> ENPV for values of I ($1, 283.33, $3, 300] with the
opposite inequality holding for ($1, 000, $1, 283.33]. This results in ENPV
= ENPV
0
= 2200 I on
I $1, 283.33 and ENPV
= ENPV
w
= 1500 I/2.2 on I ($1, 283.33, $3, 300].
Thus, for example, if I = $1, 600 we see that ENPV
0
= $600 > 0, and yet it is better to wait,
since ENPV
w
= $772.73. Here, we are better o postponing the investment even though the present
value is positive. On the other hand, suppose that I = $2, 500. Then, ENPV
0
= $300 so the
present value is negative, yet ENPV
w
= $363.64 > 0. Here, if we were force to make the decision
now we would reject the project. Yet, the expected present value of the project is positive when we
have the option of waiting!
In summary, we would invest now if I < $1, 283.33 and never invest if I > $3, 300. For interme-
diate values it is best to wait one year and investment if the price goes up.
A similar analysis can be carried out to determine values of P
o
for which it is best to invest now,
wait, or not invest at all. Indeed, if q = 0.5 then
ENPV
0
= I +P
0
(1 +i)/i,
so ENPV
0
0 whenver
P
0
I
i
1 +i
.
Let us now consider the option of waiting. If
1
1.5
I
i
1 +i
P
0
2I
i
1 +i
,
then we would only invest if the price goes up, so
ENPV
w
= 0.5
_
1.5P
0
i

I
1 +i
_
.
Again,
ENPV
= max(ENPV
0
, ENPV
w
).
Here ENPV
0
ENPV
w
on
P
0
2I
1 + 2i
1 +i
i
1 + 4i
.
Thus if i = 10% and I = 1600 waiting is better than investing now if
97 P
0
249.
An investing now is better than waiting if
P
0
> 249.
On the other hand, it is best not to invest at all if
P
0
< 97.

Engg Eco Notes

Uploaded by

Copyright:

Available Formats

Engg Eco Notes

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Engg Eco Notes

Uploaded by

Copyright:

Available Formats

IEOR4003: Industrial Economics

A, 8%, 1) = $5, 413, 659.40.

represents the earning power of money isolated from the eects

dollars at time n are equivalent to F = F

real dollars n years from now is obtained via the

= .02/1.04 = .0193 = 1.93%.

) = 0. The criterion is to accept the

> MARR, reject if i

< MARR and to remain indierent if i

) = 0? To answer this question we need a

is unique note that because the investment

) 0 n = 0, . . . , N 1. An investment that is not pure is called mixed. It is easy to

= max(x, 0), note that x = x

and also that x

= 6(1.2) + 3(3.2) = $16.8. If fractional projects are not allowed then we

= 6(1) + 3(3) = $15.

, the complementary slackness conditions must hold. These

for the linear program. Here x

represents the project selection vector,

is the value of the objective function. If all the components of x

are either zero or one we

(W) < 0, so an individual with

(W) < 0 for all W > 0. At certain level of wealth, the

is optimal. Taking the derivative

() must be decreasing, so that

for W = $200, 000, and for the W = $10, 000, 000. 2.

()V ar(X) > 0.5u

f(s)ds for x , with f() non-decreasing on x < , and non-increasing

You might also like