User Manual Ys800 Ys810

Instructiuni de utilizare si instalare yala electromagnetica incastrabila
SilverCloud YS800 / YS810 Fail Secure, normal open, NO

Yala electromagnetica SilverCloud YS800 / YS810 poate fi montata pe usi din otel, PVC sau lemn din birouri sau locuinte private, precum si
pe usi antiincendiu din spatiile publice.
Caracteristici:
- montaj incastrat, la interior sau exterior
- stare la intreruperea alimentarii: inchis
- material: inox si aliaj de zinc (YS800), otel si aliaj de zinc (YS810)
- design placut
- gama larga de aplicare
- forta de inchidere: 250 kg
- alimentare: Impuls sau temporizare maxim 1-3 secunde in functie de tipul de montaj 12 V d.c.
- Echipata cu pin central de armare ( functie de retinere la deschidere prin impuls)
- Functie de blocare pe modul deschis
- consum: 1.2A
- temperatura de functionare: -20℃ ~ 55℃
- compatibila cu sisteme de interfonie si control acces
- universala pentru usi cu deschidere spre interior sau exterior, pe stanga sau pe dreapta
Instructiuni de conectare:
1. In accesoriile produsului gasiti o dioda care conectata previne socurile de curent catre sistemul de control acces la inchiderile incorecte
ale yalei. Este recomandat ca dioda sa se lege in paralel cu yala.
- Este recomandat ca dioda sa se lege in paralel cu legaturile yalei, conform schemei electrice.
- Yala poate fi comandata de un circuit NO ( Normal deschis) ce ofera o tensiune de 12 V fie de tip impuls
( daca se aplica functia de retinere), sau de tip temporizata ( maxim 1-3 secunde).
- Functia de retinere este functionala daca pinul central de retinere/armare din interior yala ( vezi poza)
este apasat de catel/bolt clanta cand usa este inchisa. Aceasta functie permit blocarea pe deschis a yalei, pana la deschiderea usii/ portii/
clantei.
NOTE:
1. Inainte de a instala yala va rugam sa cititi aceste instructiuni cu atentie.
2. Pentru o interpretare corecta a termenilor tehnici, si a schitei de conectare, va recomandam sa apelati la un tehnician in Sisteme de
control acces, pentru a evita neplaceri create de conectarea incorecta a produsului.
Schema de instalare:
Yala
bolt
yala
yala
bolt
Note de instalare:
1. Pentru a obtine o deschidere normala a usii, pastrati 1-2 mm intre bolturile inchiderilor catod si anod;
2. Pentru a obtine o inchidere normala a usii, pastrati si 3-5 mm intre placa frontala a inchiderii catod si cea anod.
User manual and installation instructions for mortise electric lock
SilverCloud YS800 / YS810 Fail Secure Normal Open, NO
SilverCloud electromagnetic lock YS800 / YS810 can be mounted on steel, PVC or wooden doors in offices or private homes, and on fire
doors from public spaces.
Features:
- mortise mounted
- normal open
- stainless steel and zinc alloy (YS800), stainless stell and and zinc alloy (YS810)
- beautiful design
- wide range of application
- impact resistance and holding strenght: 250 kg
- voltage: 12 V d.c. Impulse or timer below 1-3s
- current 1.2A
- working temperature: -20℃ ~ 55℃
- arming middle PIN
- manual override slider;
- compatible with intercom and access control systems
- universal for inward, outward, rightward, leftward door
Wiring instructions:
1. The accessories include a diode, which prevents recoil current and voltage from a bad impact to access host when locking or unlocking.
The user should wire the diode in parallel to the wire teminal according o electric circuit below.
- The electric lock can be connected to a NO circuit, that gives a 12 V Impulse, to open the lock. Optional, if arming pin is not used, you
can apply a timer 12V voltage under 1-3 seconds
- The arming pin function ( when arming central pin is pushed by bolt, and gate/door closed) allows the
mortise electric lock to stay open until the door/gate is opened by visitors.
NOTE:
1. Before installing the lock, please read these instructions carefully.
2. To make sure the lock works properly, choose the appropriate power supply and quality wires to avoid abnormal function due to power
supply.
3. in order to avoid misunderstandings, and get a proper installation, please contact a Control Acces specialist for Installation of this
product.
Installation drawing:
Installation note:
1. To maintain proper opening of the door, keep 1 - 2 mm between the bolts of cathode lock and anode lock;
2. To maintain proper closing of the door, keep 3 - 5 mm between the front plate of cathode lock and anode lock;

User Manual Ys800 Ys810

Uploaded by

Copyright:

Available Formats

User Manual Ys800 Ys810

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

User Manual Ys800 Ys810

Uploaded by

Copyright:

Available Formats

Instructiuni de utilizare si instalare yala electromagnetica incastrabila

SilverCloud YS800 / YS810 Fail Secure, normal open, NO

You might also like