(77596992) Project DST
(77596992) Project DST
(77596992) Project DST
FORM A 1. Title of the Project: - Third Eye Rescuer Robot 2. Subject Area: -Electronics & Communication Engineering 3. Region: - Jaipur (RAJASTHAN) 4. Designation & Address of the person: - Amity school Of Engineering and Technology, Amity university Rajasthan, N.H. 11-c , Near Kanth Kalwar, Delhi-Jaipur Highway , Jaipur(Raj.) 5. Name & Year of the students: Saurabh Bansal ( IV Year,7
TH
6. Address Address of the students:Student Name s/o Mr. Suresh Chand Saur Bansal 180/171 Sector ab h 18 Pratap Nagar Bans Sanganer Jaipur al Rajasthan (302033)
7. Name & Designation of Guide: - Mr. Sumit Singh Dhanda (Asst. Prof. ASET Dept.) 8. Institutional Address: - Amity School Of Engineering and Technology, Amity university Rajasthan, N.H. 11-C, Near Kanth Kalwar, Delhi Highway, Jaipur (Rajasthan) Contact no:-+91-7568340803 Email id: - dhandasumit@gmail.com
ssdhanda@jpr.amity.edu
(saurabh.bansal597@gmail.com, +919672981352) Saurabh Bansal Name & Signature of the Student Signature of Guide of the Project
CERTIFICATE
It is hereby certified that (I) Institution takes the responsibility of implementing the Student Project Within stipulated period. (ii) The Institution shall provide the Infrastructural & other facilities required for the project. (iii) The amount sanctioned by Department of Science & Technology, Rajasthan, Jaipur shall be Provided to the concerned Student/Guide timely and funds be utilized for the purpose for which it has been sanctioned. Date:Place:- Jaipur Signature of the Head of Institution
(DR. R.K.Gupta, Director of ASET)
The Bank Details of the Institution/College prescribe are mentioned as below:1. Name of the Bank : Allahabad Bank 2. A/C No. : 20221700036 3. IFSC Code : ALLA0210177 4. Mobile number of Guide Teacher : +917568340803
Form B
Title of the Project- Third Eye Rescuer Robot Project summary: In the era of modernizing world the technology has reached far beyond our thinking. This is a project designed for handling the disaster situation like earthquake, terrorist attack and many more. We have designed a robot with the help of PCB and Micro-controller 8051 then a camera will be connected for visualization and connect thermal sensor for sensing of human . A wireless router will be connected to transfer control signal from Control Room for handling of robot from remote area.
Abstract: To overcome this problem we have made a prototype robot that can rescue the life of people by finding victims of any calamity, under the debris of building. It can work from a large distance. For example:- if something is happening in Mumbai than we can operate it from a remote area using the web server to search and help people in such conditions.
We can enhance the capabilities of robots by adding the thermal sensor, motion sensor etc. Which will increase our chances of finding the location of people who are in trouble?
Problem statement: 1. For finding out terrorist in particular location. 2. Control and management of govt. & private office.
3.
People that are caught under the debris of crashed building, that is impossible to detect by normal human eye and by Robot we can save people.
Objectives: Develop a basic understanding on the following concepts: 1. Disaster management 2. Surveillance 3. Monitoring 4. Rescuing mission
Project Description: In this project Third Eye Rescuer Robot, we use wireless networking for automatic. Control of robot and we use different type problem like terrorist, controlling of different type crime using robot
Advantages of wireless robots : Most important example of this robot is use to rescuer means it can reach at such palaces where we cannot find that people and we can rescue them. It can also be used in army as to detect the terrorist or others country movement by using thermal sensor.
Work plan:Designing of PCB by engraving circuit and mounting different components and 8051 micro-controller. Then programming of micro-controller is done, after that checking all the connections on the board and simultaneously checking the debugging of the codes. Now we will connect the further equipments like camera, routers etc., which will be needed in setting up the connection with our robot. On the other hand, we have to design a wireless robot with wireless receivers i.e. wireless routers. And we have to setup a network for wireless routing of our robot, such that the user can operate +9robot through GPS also. Time schedule-
Work plan
Days(170) (approx.)
PCB designing
PCB mounting
PCB Testing
Hardware Implementation
85
Implementation of robot
40
Router connection
10
10
Network establishing
15
Hardware Testing
10
Software implementation
65
15
Robot testing
20
Connection testing
Network testing
20
Removing of faults
Proposed outcome/ findings: 1. We will be able to control terrorists crime. 2. we can use it for surveillance. 3. it can be use in Defence Department. Details of facilities to be provided by the InstitutionHardware laboratory Or cad laboratory Hardware design laboratory Micro-controller Laboratory Programmin g laboratory Testing laboratory Work Requirement PCB design mounting machine Programming of micro- controller Software implementati on Hardware testing PCB testing Budget Estimates (with details) HARDWARE Robot Camera Joystick Wireless Route Thermal Detector Report Writing & Contingency ESTIMATE D COST(Rs) 7000
1000 500 1000 400 800
Infrastructure Available In Labs orcade software Wires, multimeter Microcontroller Kit, power supply CISCO software power supply Testing software
QUANTITY
1 2 1 2 1
TOTA L (Rs)
7000 1700 500 1700 400 800
1600 13700
MINOR EQUIPMENT: Wires, Switches, sensor. CONSUMABLE: Ply board, Connecting wires, etc. REPORT WRITING & CONTINGENCY: as per norms & above table. Utilization of the outcome of projectIt can be used in defense department It leads to lowering the risk to human life as the user will be far away from the point of accident. It can be used for executing long distance missions. Reducing the time of reaction as it can monitor from a very large distance.