TM

P R E C I S I O N M I N I AT U R E L E A D S C R E W A S S E M B L I E S
1st Edition

w w w . h e l i x l i n e a r . c o m

TM

HELIX Linear Technologies, a subsidiary of Nook Industries, is the most high-tech lead screw manufacturing facility in the world. With the release of our new precision lead screws, HELIX produces the broadest product line of any lead screw manufacturer globally. We offer precision rolled, milled, or ground screws in diameters from 18" to 6", or 3mm to 150mm, and leads from 0.024" to 3", or 3mm to 75mm. HELIX offers a complete line of nuts in standard and anti-backlash designs with centralizing threads to match our precision lead screws. Our lead screw assemblies have the lowest backlash of any nut on the market.

With the release of our new NAB and AAB product lines, HELIX has even more economical options in the 18" to 1" diameter range. We have also developed additional custom anti-backlash nut designs, which are available upon request. HELIX services the expanding and evolving customerdriven market for precision linear motion products. When you need Acme, Trapezoidal, or Speedy (high lead) lead screws with a precision low backlash nut, or a state-of-the-art anti-backlash design, we deliver the highest quality and exceptional value to our customers.

Market Segments Served

Medical & Diagnostic Aerospace Packaging Automotive Electronics Transportation Tire Manufacture Entertainment Semiconductor Military and Defense Factory Automation Pulp & Paper Steel Chemical

Partners

History
Nook Industries, Inc. was founded in 1969 by Joseph H. Nook Jr. and, over the course of the past forty years, the company has grown to become one of the leading manufacturers of linear motion products in the world. HELIX Linear Technologies, a subsidiary of Nook Industries, is one of the world's leading manufacturers of lead screws, linear actuators and motion control systems, providing precision engineered solutions. HELIX Linear Technologies engineering expertise and broad range of core technologies uniquely positions the company to solve some of the worlds greatest linear motion challenges. HELIX improves customers' productivity and profitability by finding new ways to solve their biggest challenges.

Index
Lead Screw Materials & Manufacturing ................... 2-3 Glossary and Technical Data ...................................... 4-6
End Machining / Mounting Definitions.................................... 7

Design Considerations................................................... 8 Custom Lead Screws...................................................... 9 Lead Screw Selection...............................................10-11 Anti-Backlash Nuts - AAB Series............................ 12-13 Standard Nuts - NAB Series................................... 14-15 Precision Lead Screw Sizes.................................... 16-20 Reference Number System.......................................... 21 Twin-Lead Screw Assemblies...................................... 22 Miniature Twin-Lead Assemblies Reference Number System....................................... 23 Lubricants / PTFE (Teflon)............................................ 24 Quick Reference Guide: Machined Ends and Bearing Supports.......................................................... 25 Machined Ends: Drawings and Codes................... 26-27 Motor Mounts.......................................................... 28-29 Universal Mount Bearing Support......................... 30-31 Flange Mount Bearing Support.............................. 32-33

Mission
HELIX is committed to customer success and innovation by providing high-quality, high-value products and service that are delivered on time at a competitive price. Pairing traditional and proven design with the latest technology, HELIX Linear Technologies manufactures products that customers value. The expansion of our product lines and the development of engineered systems have propelled HELIX to the forefront of the industry.

The specifications and data in this publication are believed to be accurate and reliable. However, it is the responsibility of the product user to determine the suitability of HELIX Linear Technologies products for a specific application. While defective products will be replaced without charge if promptly returned, no liability is assumed beyond such replacement.

TM

Materials and Manufacturing

HELIX Linear Technologies manufactures precision lead screws by thread rolling, thread milling, or thread grinding. HELIX lead screw products feature centralizing and custom thread forms for smooth, no-wedging performance.

Flanges For Bronze & Plastic Nuts

Made from carbon steel with black oxide finish. See page 8 for instructions on how to secure a flange to a thread mount style nut.

THREAD ROLLING
HELIX offers the largest selection of rolled lead screw sizes in the industry. Rolled thread screws are precise, cost effective, and are stocked for quick delivery.
General Purpose Nut - NAB Series - Flange Mount Style

THREAD MILLING
Milled screws allow more variety in journal machining, particularly where a design requires the journal O.D. to be larger than the screw major diameter.

THREAD GRINDING
Ground thread screws offer higher lead accuracy for applications where positioning tolerances are extremely critical.
Anti-Backlash Nut - AAB Series - Flange Mount Style

Bronze Acme & Trapezoidal NutS

Special high tensile bronze is selected for our smooth running, anti-wedging bronze nuts. Material: Bronze Tensile Yield: 50,000 psi Tensile Ultimate: 65,000 psi Hardness: HB75 Dynamic co-efficient of friction: 0.125 with HELIX Lubricant
General Purpose Nut - NAB Series - Flange Thread Style

Plastic Acme & Trapezoidal NutS

The high strength and inherent lubricity of our proprietary plastic nut material can result in product life that can equal or exceed conventional nut materials. Material: HELIX ACETAL/PTFE blend Tensile Strength @70F: 8,000 psi Compressive Strength @70F: 16,000 psi PV Limit: 2,700 lubricated Coefficient of friction: 0.10 lubricated

Anti-Backlash Nut - AAB Series - Thread Mount Style

Screw Type

Material Alloy

Thread Class HELIX Centralizing 2C or Stub HELIX Centralizing 2C or Stub HELIX Centralizing 2C or 3C HELIX Centralizing 2C or 3C HELIX Centralizing 3C or 4C HELIX Centralizing 2C or 3C

Lead Accuracy .0003 in/in up to 212 dia. .0003 in/in up to 112 dia. .002/ft .002/ft .0005/ft .0005/ft

Screw Dia.
1

Screw Lengths Limited only by material availability Limited only by material availability up to 96 up to 96 up to 120 up to 120

8 to 6

Rolled Stainless Alloy Milled Stainless Alloy Ground Stainless

8 to 112

1 2 to 3 (single starts) 1 2 to 3 (single starts) 1

4 to 4 4 to 4

Acme & Trapezoidal Alloy Screw Material Minimum Hardness Tensile Ultimate Stength Finish 4140 200 Brinnel 95,000 psi Black Oxide

Stainless Steel 300 Series 170 Brinnel 85,000 psi Natural

Lead screws control surveillance cameras.

helixlinear.com
The specifications and data in this publication are believed to be accurate and reliable. However, it is the responsibility of the product user to determine the suitability of Helix Linear Technologies, Inc. products for a specific application. While defective products will be replaced without charge if promptly returned, no liability is assumed beyond such replacement.

TM

Glossary and Technical Data

ThreadTypes
The acme thread form, established over 100 years ago, replaced square thread screws, which had straight-sided flanks and were difficult to manufacture. There are three main classes of acme thread forms: general purpose (G), centralizing (C), and stub acme. The General Purpose and Centralizing thread forms have a nominal depth of thread of 0.50 pitch and have a 29 included thread angle. Trapezoidal thread forms have a 30 included thread angle. HELIX precision lead screw assemblies have a 40 angle. Compared to general-purpose thread forms, centralizing threads are manufactured with tighter tolerances and reduced clearance on the major diameter.
Normally Loaded Nut Normally Loaded (Single Nut Flank) Single
Direction of Load Direction of Load Flank Single Contact Flank Contact ContactFlank) (Single Clearance Contact Clearance NUT

Definitions
Land (Major) Diameter - The outside diameter of the screw. Pitch Diameter - On an acme screw, this diameter is approximately halfway between the land diameter and the root diameter. It is the diameter at which the thread thickness is equal to the space between threads. Root (Minor) Diameter - The diameter of the screw measured at the bottom of the thread. Pitch - The axial distance between threads. Pitch is equal to the lead in a single start screw. Lead - The axial distance the nut advances in one revolution of the screw. The lead is equal to the pitch times the number of starts.

Side Loaded Conventional Side Loaded G Class NutConventional G Class Nut Direction Double of Load
Flank Double Contact Flank Contact NUT NUT

Direction of Load Clearance Clearance

NUT

PITCH STARTS = LEAD

NOTE: HELIX precision lead screw designations reference nominal diameter and lead. For example: 250125 screws advance 0.125" in one revolution and require eight turns for one inch of travel. A 250125 screw has 2 starts and a 0.062 pitch.

SCREW

SCREW

Normally Loaded Nut

SCREW

Single Flank Contact Major Diameter and Single Flank Contact

Side Loaded Centralized Side Loaded C Class NutCentralized Direction C Class Nut Major Diameter and of Load
NUT

Side Loaded Conventional 'G' Class Nut

SCREW

Direction Clearance of Load Clearance NUT

0.062" PITCH FOUR STARTS = 0.125" LEAD

Lead Accuracy - Lead accuracy is the difference between the actual distance traveled versus the theoretical distance traveled based on lead. For example: A screw with a 0.5 inch lead and 0.004 inch per foot lead accuracy rotated 24 times, theoretically moves the nut 12 inches. (24 Revolutions .500 inches per revolution = 12.000 inches of travel) With a lead accuracy of .0003/inch, actual travel could be from 11.996 to 12.004 inches.

SCREW SCREW

Side Loaded Centralized 'C' Class Nut

Stub acme threads follow the same basic design, but have a thread depth less than one half the pitch. If an acme nut is side loaded with a radial load, a G class will wedge when the nut thread flanks come in contact with the screw thread flanks. To prevent wedging, less clearance and tighter tolerances are allowed between the major diameter of the nut and the major diameter of the screw. CAUTION - Although a side load will not cause a centralizing thread to wedge, the nut is not designed to operate with a side load such as a pulley, drive belt, etc. See Load Definition section for further information.

Screw Starts - The number of independent threads on the screw shaft; example one, two or four.
Single Start (Lead = Pitch)
Pitch and Lead Land Dia. Root Dia.

Double Start (Lead = 2 Pitch)

Lead Pitch

Four Start (Lead = 4 Pitch)

Lead Pitch

Single Start (Lead = Pitch)

Double Start (Lead = 2 x Pitch)

Four Start (Lead = 4 x Pitch)

Matched Lead - When multiple screws are used in unison to move a load with precise synchronicity, screws of similar lead accuracy can be factory selected and supplied as sets. Consult factory for matched lead set tolerances. Straightness - Although HELIX precision lead screws are manufactured from straight, cylindrical material, internal stresses may cause the material to bend or yield. When ordering random lengths or cut material without end machining, straightening is recommended. Handling or machining of screws can also cause the material to bend or yield. Before, during and after machining, additional straightening is required. When ordering screws with machined ends from HELIX Linear Technologies, the following straightness tolerances can be expected: HELIX precision rolled and milled lead screws are straight within 0.010 inch/foot and will not exceed 0.030 inch in any 6-foot section when shipped from the factory. HELIX precision ground lead screws are straight within 0.001 inch/foot when shipped from the factory. If tighter straightness tolerances are required, contact HELIX customer service.

Life - HELIX precision lead screws are manufactured from high quality materials with excellent dynamic properties. Because of the variable effects of friction, lubrication and cleanliness, a specific life cannot be predicted. Proper lubrication, regular maintenance, and operation within specified limits will extend the life of lead screws. Efficiency - Efficiency of HELIX precision lead screw assemblies range from 15% to 85%. These efficiencies are dependent upon nut material, lubrication, lead and thread form. The efficiencies for each assembly are listed on the following pages. Backdriving - Normally, lead screws are used to convert rotary motion into linear motion. Backdriving is the result of the load pushing axially on the screw or nut to create rotary motion. Generally, a nut with efficiency greater than 50% will have a tendency to backdrive. If a selflocking assembly is required, select a nut with efficiency below 35%. CAUTION: Vibration can cause any lead screw assembly to creep or backdrive. When using lead screws, applications should be analyzed to determine the necessity of a brake, especially when the possibility of injury may occur.

ONLINE
helixlinear.com
The specifications and data in this publication are believed to be accurate and reliable. However, it is the responsibility of the product user to determine the suitability of Helix Linear Technologies, Inc. products for a specific application. While defective products will be replaced without charge if promptly returned, no liability is assumed beyond such replacement.

TM

Glossary and Technical Data (continued)

Backlash - Backlash (lash) is the relative axial clearance between a screw and nut without rotation of the screw or nut. Backlash information for HELIX precision lead screws and nuts is listed within the data section of this Nut catalog. Lash will always increase with use. HELIX Linear Technologies has developed several unique ways to reduce or remove the Leadscrew lash between the screw and nut.
Nut
Backlash in Blue

Static Load - The maximum thrust load including shock that should be applied to a non-moving nut assembly. Actual maximum static load may be reduced based on end machining and screw mounting hardware. Dynamic Load - The maximum recommended thrust load which should be applied to the lead screw and nut assembly while in motion. Pv Load - Any material which carries a sliding load is limited by heat buildup caused by friction. The factors that affect heat generation rate in an application are the pressure on the nut in pounds per square inch of contact area and the surface velocity in feet per minute at the major diameter. The product of these factors provides a measure of the severity of an application. Tension Load - A load that tends to stretch the screw.

Leadscrew Nut

Leadscrew
FORCE

Standard FORCENut

Nut A

FORCE

Nut B

FORCE

Compression Load - A load that tends to squeeze the screw.

Load Load Load Load

Leadscrew
FORCE FORCE FORCE FORCE Leadscrew

Nut A

Nut B

Nut A

Tension Anti-Backlash Nut

FORCE

Nut B

Leadscrew
FORCE FORCE FORCE FORCE

Load

Load

Load

Load

Nut A
FORCE FORCE

Nut B
FORCE

Leadscrew

Compression Load

Tension Load

FORCE

Compression Anti-BacklashNut Nut B Nut A

FORCE FORCE FORCE

Thrust Load - A load parallel to and concentric with the axis of the screw. Overturning Load - A load that tends to rotate the nut radially around the longitudinal axis of the screw. Side Load - A load that is applied radially to the nut.

Leadscrew

FORCE

Nut A

Nut B

Leadscrew
OVERTURNING LOAD THRUST LOAD

THRUST LOAD SIDE LOAD

End Machining / Mounting Definitions

EZZE-MOUNT- EZZE-MOUNT bearing blocks contain precision anti-friction bearings and are designed to be used with both acme ball screws and lead screws. Single and double bearing base mount and flange mount versions of EZZE-MOUNT bearing blocks are available. Standard Ends - For each screw size, HELIX has designed a family of standard machined ends applicable to a variety of bearing arrangements. The use of standard machined end designs offer quick deliveries. See page 26-27 for details. Land Diameter - Land diameter is the outside diameter of the screw. The difference between the land diameter and the bearing journal is the resulting bearing shoulder. Root Diameter - The diameter of the screw measured at the bottom of the thread. This diameter is used for determining journal sizes. If the bearing journal diameter is larger than the root diameter, thread tracings may be visible. Generally, these tracings do not have an effect on bearing performance. Journal - A smooth diameter machined on the end of the screw used as a mounting surface for bearings, couplings, pulleys, gears, etc. Straightness - Although HELIX screws are manufactured from straight, cylindrical material, internal stresses may cause the material to bend. When ordering random lengths or cut material without end machining, straightening is recommended. Handling or machining of screws can also cause the material to bend. Before, during and after machining, additional straightening is required. Concentricity - Concentricity refers to multiple diameters sharing the same center. For end machining, close concentricity allows all components to rotate around the same axis resulting in smooth operation and long operating life. End Fixity - End fixity refers to the method by which the ends of the screw are supported. The degree of end fixity is related to the amount of restraint of the ends of the screw. The three basic types of end fixity are: Free Simple Fixed No support Shaft restrained against radial and/or axial loads Shaft rigidly restrained against radial, axial and moment loads

See page 10 for a more detailed definition of end fixity. Locknut Threads - Locknut threads are machined to allow the bearing retention on the screw shaft by means of a locknut. The thread used on standard machined ends follows American National Form NS Class 3. Precision ground locknuts are available on special order. Undercuts and Radii - Whenever a shaft changes diameter, an undercut or a radius is machined into the transition to minimize stress concentration. Undercuts are preferred for bearing shoulders because they allow clearance for the corner of the bearing.

Approval Drawings - If custom ends or special dimensions are desired, we are happy to create an approval drawing for your review. These drawings will show all the critical dimensions with appropriate tolerance and require customer approval prior to manufacture.

ONLINE
helixlinear.com
The specifications and data in this publication are believed to be accurate and reliable. However, it is the responsibility of the product user to determine the suitability of Helix Linear Technologies, Inc. products for a specific application. While defective products will be replaced without charge if promptly returned, no liability is assumed beyond such replacement.

TM

Design Considerations
Mounting and Pinning of Flanges
The preferred method of locking a flange to a nut is a pin or set screw parallel to the screw which intersects the flange/nut mounting thread. Because of the dissimilarity of materials, the hole may need to be milled, not drilled. Alternatively, the flange may be drilled and tapped radially for a set screw. After assembly of the flange to the nut, spot drill the nut threads through the flange and install a dog point set screw from the flange O.D. into the nut O.D. threads. Avoid getting metal chips in the nut when drilling.

Torque
The required motor torque to drive a lead screw assembly is the sum of three components: inertial torque, drag torque and torque-to-move load. It must be noted that this is the torque necessary to drive the lead screw assembly alone. Additional torque when driving frictional bearings, motor shafts, moving components and drag due to general assembly misalignment must also be considered. Inertial Torque

Tj = I
WHERE: I = screw inertia = angular acceleration

Pin or Set Screw

Drilled and Tapped with Set Screw

Diameter

Description
1

Qty

.25 to .625 .75 to 1.0

8 14 Slotted Spring Pin #10 - 24 4 Set Screw

1

1 1

Drag Torque - HELIX anti-backlash assemblies are typically supplied with drag torque of 1 to 7 oz.-in. The magnitude of the drag torque is dependent on the standard factory settings or settings specified by the customer. Generally, the higher the preset force, the better the anti-backlash characteristics. Torque-to-move

Commercially available thread adhesives may be used for light load applications. Follow the manufacturers recommendations to ensure a satisfactory bond. Avoid getting the adhesive onto the lead screw thread.

Load x Lead TL = 2 x Efficiency Back driving

Back driving is the ability of a screw to be turned by a thrust load applied to the nut. Generally, back driving will not occur when the screw lead is less than 1/3 the diameter for uncoated screws or 1/4 the diameter for HELIX PTFE coated screws. For higher leads where back driving is likely, the torque required for holding a load is:

Lubrication
Proper lubrication must be provided to achieve satisfactory service life. HELIX acme screw lubricant (E-100 spray lube or PAG-1 grease) is recommended for applications using precision lead screws without Teflon coating. Lubrication intervals are determined by the application. It is required that screw assemblies are lubricated often enough to maintain a film of lubricant on the screw.

Load x Lead x Backdrive Efficiency TL =

Temperature
With proper lubrication, HELIX Lead screws with bronze nuts operate efficiently between 15F and 350F , and plastic nuts between 15F and 175F .

Optional Surface Coatings

Custom injection molded nuts from HELIX Engineered Acetyl and Delrin AF

Consult HELIX engineers for specific surface coatings for anti-corrosion and lubrication.

Custom Lead screw Assemblies

Custom nuts
At HELIX, we mold and machine a wide array of lead screw nuts and actuator components from standard polymers such as PEEK, Torlon, Acetal, Polypropylene, Turcite, and custom engineered polymers that include PTFE, PFPE, silicone, carbon fibers, graphite, glass fibers and molybdenum disulfide. Should cost or design constraints require a more integrated package; our engineering staff can help you simplify your design by combining several different components into a molded nut.

Custom Turcite Nuts

Custom Machining
We offer extensive machining services on our lead screws and nuts. Journals, keyways, flats, centers, snap ring grooves and counterbores are common dimensions for us to machine on the ends of lead screws. Simply email us your sketch, drawing, or 3D model and we will provide a quotation in 24 hours.

Custom Screws
At HELIX Linear Technologies, we manufacture the most precise lead screws in the world. We have perfected the thread-rolling process over four decades and today offer the widest range of thread rolling capacity globally. We have manufactured hundreds of custom screw diameters and leads for our customers who require a size that is not in our catalog. We are also the experts in threadrolling non-standard materials and produce screws from aluminum, high-carbon steel, titanium, 300 and 400 series stainless steels, plastics and special chemistry alloys. See chart below for custom screw specifications.
Acme Threaded Bars Diameters Stock Lengths Special Order Material 18" - 12" Trapezoidal Threaded Bars 4mm - 300mm Screw Threads up to 16" (400mm) N/A

Custom Aluminum Acme Screw

Custom Anti-backlash Nut Solutions

Specialty Forms up to 16" (400mm)

3, 6, 12, 24 foot lengths Carbon Steels, Alloy Steels, Alloy Heat Treated Steels, Stainless Steel, Aluminum, Titanium, Exotic Metals HELIX 40 Acme, ASME Standard Acme, Stub Acme, Modified Stub Acme, Speedy HighLead, and Special Profiles made to order 2G, 2C, 3G, 3C ISO/DIN 30 Trapezoidal, Speedy High-Lead, and Special Profiles made to order

Custom lengths up to 50 Ft. Full Thread, Double End and Single End Parts Carbon Steels, Alloy Steels, Alloy Heat Treated Steels, Stainless Steels, Aluminum, Brass, Titanium, Exotic Metals UN/ISO 60 Threads and Special Threads made to order American Worm, Module Worm, Modified Buttress, Straight Knurling, Diamond Knurling

Thread Profiles

Class of Fit Thread Direction Thread Starts

7e, 8e, 8c, Modified Right Hand, Left Hand Single, Multiple

2A, 3A, 7e, 8e .

N/A N/A

helixlinear.com
The specifications and data in this publication are believed to be accurate and reliable. However, it is the responsibility of the product user to determine the suitability of Helix Linear Technologies, Inc. products for a specific application. While defective products will be replaced without charge if promptly returned, no liability is assumed beyond such replacement.

TM

Lead screw Selection

The selection of the correct lead screw and nut for a particular application involves four interrelated factors. Before attempting to determine the lead screw and nut combination, the following values must be known: Axial load measured in pounds or newtons Speed measured in inches or millimeters per minute Length between bearings measured in inches or millimeters End fixity type
L L L

Fixed

L L L

Free

L L

Simple

L L

Simple

Load - The loads that need to be considered are the static loads, dynamic loads, reaction forces and any external forces affecting the screw. See page 6 for details on load definitions. Speed - The travel rate (linear speed) is the rpm at which the screw or nut is rotating multiplied by the lead of the screw. Length - The unsupported length of the screw. End Fixity - End fixity refers to the method by which the ends of the screw are supported. The degree of end fixity is related to the amount of restraint of the ends of the screw. Here are four basic types of end fixity:

Fixed

L L

Simple

L L

Fixed

L L

Fixed

Simple End fixity can be provided through a single bearing support. Multiple or Spaced Pairs of bearings are more rigid than a Simple support, but because of their compliance are not truly Fixed .

Lead screws automate silicon wafer processing machines.

10

Critical Speed
Once the load, speed, length and end fixity are identified, the next factor to consider is the critical speed. The speed that excites the natural frequency of the screw is referred to as the critical speed. Resonance at the natural frequency of the screw will occur regardless of the screw orientation (vertical, horizontal etc.) or if the system is designed so the nut rotates about the screw. The critical speed will vary with the diameter, unsupported length, end fixity and rpm. Since critical speed can also be affected by shaft straightness and assembly alignment, it is recommended that the maximum speed be limited to 80% of the calculated critical speed. The theoretical formula to calculate critical speed in rpm is:

Column Strength
When a screw is loaded in compression (see compression load definition on page 6), its limit of elastic stability can be exceeded and the screw will fail through bending or buckling. The theoretical formula to calculate the column strength in pounds is:

Pcr =

14.03 106 Fc d4 L2

106 d N = Cs 4.76 L2
WHERE: N = Critical Speed (rpm) d = Root Diameter of Screw (inch) L = Length Between Bearing Supports (inch) Cs = 0.36 for one end fixed, one end free 1.00 for both ends simple 1.47 for one end fixed, one end simple 2.23 for both ends fixed If the selected lead screw does not meet critical speed criteria, consider the following options: a) Increase screw lead and reduce rpm b) Change end fixity (e.g. simple to fixed) c) Increase screw diameter

WHERE: Pcr = Maximum Load (lb) Fc = End Fixity Factor 0.25 for one end fixed, one end free 1.00 for both ends supported 2.00 for one end fixed, one end simple 4.00 for both ends rigid d = Root Diameter of Screw (inch) L= Distance between nut and load carrying bearing (inch) If the selected screw does not meet compression load criteria, consider the following options: a) Change end fixity (e.g. simple to fixed) b) Design to use screw in tension c) Increase screw diameter

PV Value
For plastic nuts, the PV value needs to be checked (see the PV load definition page 6). The operating load values for the plastic nuts are based on a pressure of 1,250 lb per square inch. Any loads less than the operating load can be evaluated by using the following:

Screw Inertia
Screw Size in (mm)
1 8 964 5 32 3 16 7 32

Screw Inertia (oz-in sec 2/in)

Screw Size in (mm)

38 7 16 1 2 58 3 4 7 8

Screw Inertia (oz-in sec 2/in)

(3.2) (3.5) (3.97) (4.76) (5.55) (6) (8)

1.8 x 10 -7 3.4 x 10 -7 4.9 x 10 -7 1.1 x 10 -6 1.8 x 10 -6 0.3 x 10 -5 5.0 x 10 -5

(10) (11) (13) (16) (19) (22) (24)

1.5 x 10 -5 3.5 x 10 -5 5.2 x 10 -5 14.2 x 10 -5 30.5 x 10 -5 58.0 x 10 -5 73.0 x 10 -5

P=

Actual Operating Load 1450 Chart Operating Load

V is the relative speed between the nut and the screw in feet per minute. V can be calculated by using the following:

1 4 5 16

Outside Dia. of Operating Speed (rpm) V = the Screw (in) 12

It is recommended that P V be limited to values less than 2,700.

15 16

helixlinear.com
The specifications and data in this publication are believed to be accurate and reliable. However, it is the responsibility of the product user to determine the suitability of Helix Linear Technologies, Inc. products for a specific application. While defective products will be replaced without charge if promptly returned, no liability is assumed beyond such replacement.

11

TM

ANTI-BACKLASH NUTS
AAB Series Flange Mount Style HELIX Engineered Acetal Zero Backlash Up To Preload Weight Excellent Lubricity Low Wear

OD

BCD (3) K Dia Slots B

Diameter
3 16 "

Diameter Code 018 020 024 025 031 032 037 039 043 047 050 055 056 062 063 071 075 079 087 088 093 094 100

A in (mm)

Bmin in (mm)

Bmax in (mm)

F in (mm)

OD in (mm)

K in (mm)

BCD in (mm)

Preload Force1 (lb)

Dynimic Load2 (lb) 45 50 70 75 80 82 85 100 150 175 200 210 220 250 260 300 330 370 400 400 500 500 460

Static Load (lb) 225 250 350 375 400 410 425 500 750 875 1000 1050 1100 1250 1300 1500 1650 1850 2000 2000 2500 2500 2300

5mm 6mm
1 4" 5 16 "

0.563 (14.3)

0.950 (24.1)

1.100 (27.9)

0.188 (4.8)

1.000 (25.4)

0.144 (3.7)

0.750 (19.1)

0.5 - 1.5 1 - 3.25

8mm
3 8"

0.688 (17.5)

1.210 (30.7)

1.398 (35.5)

0.188 (4.8)

1.125 (28.6)

0.144 (3.7)

0.875 (22.2)

1 - 2.5 1.75 - 5.25

10mm
7 16 "

12mm
1 2"

0.875 (22.2)

1.750 (44.5)

2.000 (50.8)

0.250 (6.4)

1.500 (38.1)

0.203 (5.2)

1.125 (28.6)

1.75 - 4 3.75 - 9.5

14mm
9 16 " 5 8"

16mm 18mm
3 4"

1.125 (28.6)

2.030 (51.6)

2.343 (59.5)

0.250 (6.4)

1.750 (44.5)

0.221 (5.6)

1.438 (36.5)

1.75 - 4 3.75 - 9.5

20mm 22mm
7 8 " 5 16 "

1.500 (38.1)

2.300 (58.4)

2.675 (67.9)

0.313 (7.9)

2.250 (57.2)

0.257 (6.5)

1.875 (47.6)

3-5 5.5 - 10.5

24mm 1"

1. Range in preload force available from Low Force Spring and High Force Spring, respectively. 2. AAB-Series Nuts are only as axially stiff as the spring force in one direction.

twin-lead screws p. 22

lubricants p. 24

end machining p. 25-27

motor mounts p. 28-29

EZZE-MOUNT bearing supports p. 30-33

12

ANTI-BACKLASH NUTS
AAB Series Thread Mount Style HELIX Engineered Acetal Zero Backlash Up To Preload Weight Excellent Lubricity Low Wear
HEX A

THD

H B

Diameter
1 8"

Diameter Code 012 016 018 020 024 025 031 032 037 039 043 047 050 055 056 062 063 071 075 079 087 088 093 094 100

A in (mm)

Bmin in (mm)

Bmax in (mm)

C in (mm)

H in (mm)

HEX in

THD in

Preload Force (lb)

Dynimic Load (lb) 35 45 55 60 110 115 120

Static Load (lb) 175 225 275 300 550 575 600 610 625 725 1000 1225 1450 1625 1675 1750 1775 2000 2200 2400 2650 2650 3300 3300 3000

4mm
3 16 "

0.400 (10.2)

0.810 (20.6)

.935 (23.7)

0.188 (4.8)

0.125 (3.2)

16

8-24UNF

0.5 - 1.5 1-3

5mm 6mm
1 4" 5 16 "

0.563 (14.3)

0.950 (24.1)

1.100 (27.9)

0.250 (6.4)

0.188 (4.8)

16-18UNF

0.5 - 1.5 1 - 3.25

8mm
3 8"

0.688 (17.5)

1.210 (30.7)

1.398 (35.5)

0.250 (6.4)

0.188 (4.8)

11

16

8-18UNF

1 - 2.5 1.75 - 5.25

122 125 145 200 245 290 325 335 350 360 400 440 480 530 530 660 660 600

10mm
7 16 "

12mm
1 2 "

0.875 (22.2)

1.750 (44.5)

2.000 (50.8)

0.375 (9.5)

0.250 (6.4)

15

16-16UN

1.75 - 4 3.75 - 9.5

14mm
9 16 " 5 8"

16mm 18mm
3 4"

1.125 (28.6)

2.030 (51.6)

2.343 (59.5)

0.375 (9.5)

0.250 (6.4)

118

1116-16UN

3.25 - 6.5 6 - 12

20mm 22mm
7 8 " 15 16 "

1.500 (38.1)

2.300 (58.4)

2.675 (67.9)

0.375 (9.5)

0.313 (7.9)

1716

138-16UN

5.5 - 10.5 10 - 20

24mm 1"

1. Range in preload force available from Low Force Spring and High Force Spring, respectively. 2. AAB-Series Nuts are only as axially stiff as the spring force in one direction.

ONLINE
helixlinear.com
The specifications and data in this publication are believed to be accurate and reliable. However, it is the responsibility of the product user to determine the suitability of Helix Linear Technologies, Inc. products for a specific application. While defective products will be replaced without charge if promptly returned, no liability is assumed beyond such replacement.

13

TM

GENERAL PURPOSE NUTS

NAB Series Flange Mount Style HELIX Engineered Acetal Excellent Lubricity and Low Friction Precision Positioning to 0.0002"/inch
(2) "K" Dia Slots

OD

OD

BC

(3) "K" Dia Slots

BC B

(For 012-020 only)

Diameter
1 8"

Diameter Code 012 016 018 020 024 025 031 032 037 039 043 047 050 055 056 062 063 071 075 079 087 088 093 094 100

A in (mm)

B in (mm)

F in (mm)

OD in (mm)

K in (mm)

BC in (mm)

Dynamic Load (lb) 20 35 45 50 70 75 80 82 85 100 150

Static Load (lb) 100 175 225 250 350 375 400 410 425 500 750 875 1000 1050 1100 1250 1300 1500 1650 1850 2000 2000 2500 2500 2300

4mm
3 16 "

0.400 (10.2)

0.500 (12.7)

0.130 (3.3)

0.760 (19.3)

0.120 (3.05)

0.600 (15.2)

5mm 6mm
1 4" 5 16 "

0.500 (12.7)

0.625 (15.9)

0.188 (4.8)

1.000 (25.4)

0.144 (3.7)

0.750 (19.1)

8mm
3 8"

0.625 (15.9)

0.750 (19.1)

0.188 (4.8)

1.125 (28.6)

0.144 (3.7)

0.875 (22.2)

10mm
7 16 "

12mm
1 2"

0.750 (19.1)

1.125 (28.6)

0.250 (6.4)

1.500 (38.1)

0.203 (5.2)

1.125 (28.6)

175 200 210 220 250 260 300 330 370 400 400 500 500 460

14mm
9 16 " 5 8"

16mm 18mm
3 4"

1.125 (28.6)

1.250 (31.8)

0.250 (6.4)

1.750 (44.5)

0.221 (5.6)

1.438 (36.5)

20mm 22mm
7 8 " 15 16 "

1.500 (38.1)

1.375 (34.9)

0.313 (7.9)

2.250 (57.2)

0.257 (6.5)

1.875 (47.6)

24mm 1"

twin-lead screws p. 22

lubricants p. 24

end machining p. 25-27

motor mounts p. 28-29

EZZE-MOUNT bearing supports p. 30-33

14

GENERAL PURPOSE NUTS

NAB Series Thread Mount Style HELIX Engineered Acetal Excellent Lubricity and Low Friction Precision Positioning to 0.0002"/inch
HEX A

THD

H B C

Diameter
1 8"

Diameter Code 012 016 018 020 024 025 031 032 037 039 043 047 050 055 056 062 063 071 075 079 087 088 093 094 100

A in (mm)

B in (mm)

C in (mm)

H in (mm)

HEX in

THD in

Dynamic Load (lb) 35 45 55 60 110 115 120 122 125 145 200

Static Load (lb) 175 225 275 300 550 575 600 610 625 725 1000 1225 1450 1625 1675 1750 1775 2000 2200 2400 2650 2650 3300 3300 3000

4mm
3 16 "

0.400 (10.2)

0.500 (12.7)

0.188 (4.8)

0.125 (3.2)

7 16

3 8 -24UNF

5mm 6mm
1 4" 5 16 "

0.500 (12.7)

0.625 (15.9)

0.250 (6.4)

0.188 (4.8)

58

9 16 -18UNF

8mm
3 8"

0.625 (15.9)

0.750 (19.1)

0.250 (6.4)

0.188 (4.8)

11 16

5 8 -18UNF

10mm
7 16 "

12mm
1 2"

0.750 (19.1)

1.125 (28.6)

0.375 (9.5)

0.250 (6.4)

15 16 -16UN

245 290 325 335 350 360 400 440 480 530 530 660 660 600

14mm
9 16 " 5 8"

16mm 18mm
3 4"

1.125 (28.6)

1.250 (31.8)

0.375 (9.5)

0.250 (6.4)

11 8

11 16 -16UN

20mm 22mm
7 8 " 15 16 "

1.500 (38.1)

1.375 (34.9)

0.375 (9.5)

0.313 (7.9)

17 16

13 8 -16UN

24mm 1"

ONLINE
helixlinear.com
The specifications and data in this publication are believed to be accurate and reliable. However, it is the responsibility of the product user to determine the suitability of Helix Linear Technologies, Inc. products for a specific application. While defective products will be replaced without charge if promptly returned, no liability is assumed beyond such replacement.

15

TM

Lead screw Size List

Precision Rolled to 0.0002"/inch Lead Accuracy 300 Series Stainless Steel Optional PTFE Teflon Coating
Outside Diameter Root Diameter

Diameter

Diameter Code

Lead (in) 0.0240 0.0313 0.0394 0.0480 0.0625 0.0750 0.0787 0.0960 0.1250 0.1575 (mm) 0.61 0.79 1.00 1.22 1.59 1.91 2.00 2.44 3.18 4.00 10.00 0.61 0.64 0.79 1.00 1.22 1.27 1.59 2.00 2.44 2.54 3.18 4.00 5.08 5.00 20.00

Lead Code 024 031 039 048 062 075 078 096 125 157 393 024 025 031 039 048 050 062 078 096 100 125 157 200 196 787

Outside Diameter (in) (mm) 0.125 0.130 0.134 0.125 0.130 0.127 0.134 0.125 0.130 0.134 0.158 0.204 0.205 0.208 0.213 0.217 0.218 0.208 0.213 0.217 0.218 0.208 0.213 0.218 0.212 0.236 3.18 3.30 3.40 3.18 3.30 3.23 3.40 3.18 3.30 3.40 4.00 5.18 5.21 5.28 5.41 5.51 5.54 5.28 5.41 5.51 5.54 5.28 5.41 5.54 5.39 6.00

Root Diameter (in) (mm) 0.098 0.094 0.090 0.098 0.094 0.096 0.090 0.098 0.094 0.090 0.118 0.177 0.175 0.172 0.168 0.164 0.163 0.172 0.168 0.164 0.163 0.172 0.168 0.163 0.142 0.197 2.49 2.39 2.29 2.49 2.39 2.44 2.29 2.49 2.39 2.29 3.00 4.50 4.45 4.37 4.27 4.17 4.14 4.37 4.27 4.17 4.14 4.37 4.27 4.14 3.60 5.00

Efficiency* (%) 25 - 40 30 - 47 35 - 52 40 - 57 45 - 63 49 - 67 50 - 68 55 - 71 59 - 75 63 - 78 64 - 79 17 - 29 17 - 29 21 - 34 24 - 39 28 - 44 29 - 45 34 - 51 39 - 56 43 - 61 44 - 62 49 - 66 54 - 71 58 - 74 63 - 78 69 - 86

1 8"

012

4mm

016

0.3937 0.0240 0.0250 0.0313 0.0394 0.0480 0.0500

3 16 "

018

0.0625 0.0787 0.0960 0.1000 0.1250 0.1575 0.2000

5mm 6mm

020 024

0.1969 0.7874

* Range in Theoretical Efficiency based on plastic nut and alloy steel screw, unlubricated and lubricated. An increase in efficiency of 4 to 5 percentage points can be expected with Teflon coated screws.

twin-lead screws p. 22

lubricants p. 24

end machining p. 25-27

motor mounts p. 28-29

EZZE-MOUNT bearing supports p. 30-33

16

Lead screw Size List (continued)

Precision Rolled to 0.0002"/inch Lead Accuracy 300 Series Stainless Steel Optional PTFE Teflon Coating
Outside Diameter Root Diameter

Diameter

Diameter Code

(in) 0.024 0.025 0.03125 0.0394 0.048 0.050 0.0625 0.0787 0.096 0.100 0.125 0.1575 0.1969 0.200 0.250 0.333 0.500 1.000 0.100

Lead

(mm) 0.6096 0.6350 0.7938 1.0 1.2192 1.2700 1.5875 2.0 2.4384 2.5400 3.1750 4.0 5.0 5.0800 6.3500 8.46 12.70 25.40 2.54 6.35 12.70 4.00 7.50 8.00 10.00 12.00 15.00 20.00 25.00 30.00

Lead Code 024 025 031 039 048 050 062 078 096 100 125 157 196 200 250 333 500 999 100 250 500 157 295 315 393 472 590 787 984 M30

Outside Diameter (in) (mm) 0.250 0.250 0.250 0.250 0.250 0.250 0.250 0.250 0.250 0.250 0.250 0.250 0.250 0.250 0.250 0.250 0.248 0.250 0.313 0.313 0.313 0.311 0.303 0.315 0.323 0.319 0.319 0.350 0.291 0.339 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.30 6.35 7.94 7.94 7.94 7.90 7.70 8.00 8.20 8.10 8.10 8.90 7.40 8.60

Root Diameter (in) (mm) 0.223 0.220 0.214 0.206 0.197 0.195 0.178 0.206 0.197 0.195 0.178 0.206 0.206 0.195 0.178 0.192 0.181 0.165 0.193 0.216 0.216 0.217 0.232 0.226 0.217 0.232 0.232 0.228 0.248 0.295 5.66 5.59 5.44 5.23 5.00 4.95 4.52 5.23 5.00 4.95 4.52 5.23 5.23 4.95 4.52 4.88 4.60 4.20 4.90 5.49 5.49 5.50 5.90 5.74 5.50 5.90 5.90 5.80 6.30 7.50

Efficiency* (%) 14 - 24 14 - 25 18 - 30 21 - 35 25 - 40 26 - 41 31 - 48 35 - 52 39 - 57 41 - 58 46 - 64 50 - 67 55 - 71 60 - 75 60 - 76 63 - 79 63 - 79 63 - 79 33 - 50 58 - 73 65 - 81 51 - 68 63 - 79 64 - 80 65 - 81 65 - 81 66 - 82 67 - 84 69 - 86 69 - 86

1 4"

025

5 16 "

031

0.250 0.500 0.1575 0.2953 0.3150 0.3937

8mm

032

0.4724 0.5906 0.7874 0.9843 1.1811

* Range in Theoretical Efficiency based on plastic nut and alloy steel screw, unlubricated and lubricated. An increase in efficiency of 4 to 5 percentage points can be expected with Teflon coated screws.

ONLINE
helixlinear.com
The specifications and data in this publication are believed to be accurate and reliable. However, it is the responsibility of the product user to determine the suitability of Helix Linear Technologies, Inc. products for a specific application. While defective products will be replaced without charge if promptly returned, no liability is assumed beyond such replacement.

17

TM

Lead screw Size List (continued)

Precision Rolled to 0.0002"/inch Lead Accuracy 300 Series Stainless Steel Optional PTFE Teflon Coating
Outside Diameter Root Diameter

Diameter

Diameter Code

Lead (in) 0.0250 0.0394 0.0500 0.0625 0.0787 0.0833 0.1000 0.1250 0.1575 Lead (mm) 0.64 1.00 1.27 1.59 2.00 2.12 2.54 3.18 4.00 4.23 5.00 5.08 6.35 8.47 9.53 10.00 10.16 12.70 25.40 3.00 10.00 12.00 15.00 35.00 50.00 30.50 3.00 15.00 25.00 40.00 45.00 60.00

Lead Code 025 039 050 062 078 083 100 125 157 166 196 200 250 333 375 393 400 500 999 118 393 472 590 M35 M50 M31 118 590 984 M40 M45 M60

Outside Diameter (in) (mm) 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.394 0.394 0.394 0.394 0.398 0.394 0.441 0.472 0.480 0.469 0.453 0.504 0.461 9.525 9.525 9.525 9.525 9.525 9.525 9.525 9.525 9.525 9.525 9.525 9.525 9.525 9.525 9.525 9.525 9.525 9.525 9.525 10.00 10.00 10.00 10.00 10.10 10.00 11.20 12.00 12.20 11.90 11.50 12.80 11.70

Root Diameter (in) (mm) 0.345 0.331 0.320 0.303 0.286 0.282 0.255 0.303 0.286 0.286 0.330 0.255 0.303 0.282 0.303 0.331 0.255 0.278 0.238 0.312 0.323 0.280 0.291 0.350 0.291 0.315 0.303 0.362 0.315 0.402 0.449 0.358 8.763 8.407 8.128 7.696 7.264 7.163 6.477 7.696 7.264 7.264 8.382 6.477 7.696 7.163 7.696 8.407 6.477 7.061 6.045 7.92 8.20 7.10 7.40 8.90 7.40 8.00 7.69 9.20 8.00 10.20 11.40 9.10

Efficiency* (%) 10 - 18 15 - 26 18 - 31 22 - 37 27 - 43 28 - 44 33 - 50 36 - 53 42 - 59 43 - 61 45 - 63 48 - 66 51 - 68 58 - 74 59 - 75 59 - 75 61 - 77 63 - 79 64 - 80 39 - 49 63 - 79 65 - 81 66 - 82 69 - 86 67 - 84 68 - 85 38 - 48 65 - 82 68 - 85 69 - 86 69 - 86 67 - 84

3 8"

037

0.1667 0.1969 0.2000 0.2500 0.3333 0.3750 0.3937 0.4000 0.5000 1.0000 0.1181 0.3937 0.4724 0.5906 1.3780 1.9685

10mm

039

7 16 "

043

1.2008 0.1181 0.5906 0.9843 1.5748 1.7717 2.3622

12mm

047

twin-lead screws p. 22

lubricants p. 24

end machining p. 25-27

motor mounts p. 28-29

EZZE-MOUNT bearing supports p. 30-33

18

Lead screw Size List (continued)

Precision Rolled to 0.0002"/inch Lead Accuracy 300 Series Stainless Steel Optional PTFE Teflon Coating
Outside Diameter Root Diameter

Diameter

Diameter Code

Lead (in) 0.1000 0.2000 0.2500 0.5000 1.0000 1.4016 0.3150 0.7087 (mm) 2.54 5.08 6.35 6.35 25.40 35.60 8.00 18.00 20.00 30.00 70.00 40.60 2.54 6.35 6.35 9.53 4.00 20.00 21.00 25.00 35.00 45.72 80.00 90.00 16.00 24.00 30.00 40.00 50.80 100.00

Lead Code 100 200 250 500 998 M36 315 708 787 M30 M70 M41 100 125 200 375 157 787 826 984 M35 M46 M80 M90 629 944 M30 M40 M51 M00

Outside Diameter (in) (mm) 0.500 0.500 0.500 0.500 0.500 0.504 0.551 0.563 0.524 0.547 0.532 0.567 0.625 0.625 0.625 0.625 0.630 0.598 0.650 0.630 0.626 0.630 0.598 0.669 0.709 0.736 0.740 0.705 0.693 0.740 12.70 12.70 12.70 12.70 12.70 12.80 14.00 14.30 13.30 13.90 13.50 14.40 15.88 15.88 15.88 15.88 16.00 15.20 16.50 16.00 15.90 16.00 15.20 17.00 18.00 18.70 18.80 17.90 17.60 18.80

Root Diameter (in) (mm) 0.359 0.391 0.332 0.406 0.392 0.378 0.386 0.449 0.347 0.398 0.429 0.441 0.516 0.457 0.484 0.457 0.429 0.492 0.535 0.453 0.476 0.504 0.496 0.563 0.563 0.618 0.559 0.555 0.567 0.638 9.12 9.93 8.43 10.31 9.96 9.60 9.80 11.40 8.80 10.10 10.90 11.20 13.11 11.61 12.29 11.61 10.90 12.50 13.60 11.50 12.10 12.80 12.60 14.30 14.30 15.70 14.20 14.10 14.40 16.20

Efficiency* (%) 32 - 40 46 - 57 50 - 63 60 - 75 64 - 80 69 - 86 56 - 70 65 - 82 67 - 83 68 - 85 67 - 84 69 - 86 28 - 35 32 - 40 41 - 51 53 - 66 37 - 46 66 - 82 66 - 82 67 - 84 68 - 85 69 - 86 66 - 82 67 - 84 62 - 77 66 - 82 67 - 84 69 - 86 70 - 87 67 - 84

1 2"

050

14mm

055

0.7874 1.1811 2.7559

9 16 "

056

1.5984 0.1000 0.1250 0.2000 0.3750 0.1575 0.7874 0.8268 0.9843 1.3780 1.8000 3.1496 3.5433 0.6299 0.9449 1.1811 1.5748 2.0000 3.9370

5 8"

062

16mm

062

18mm

071

ONLINE
helixlinear.com
The specifications and data in this publication are believed to be accurate and reliable. However, it is the responsibility of the product user to determine the suitability of Helix Linear Technologies, Inc. products for a specific application. While defective products will be replaced without charge if promptly returned, no liability is assumed beyond such replacement.

19

TM

Lead screw Size List (continued)

Precision Rolled to 0.0002"/inch Lead Accuracy 300 Series Stainless Steel Optional PTFE Teflon Coating
Outside Diameter Root Diameter

Diameter

Diameter Code

(in) 0.1000 0.1667

Lead

(mm) 2.54 4.23 5.08 8.47 12.70 4.00 12.00 27.00 45.00 20.00 35.00 50.00 4.22 30.00 40.00 55.00 2.54 4.23 5.08 6.35 12.70 25.40 76.20

Lead Code 100 166 200 333 500 157 472 M27 M45 787 M35 M50 166 M30 M40 M55 100 166 200 250 500 999 M76

Outside Diameter (in) (mm) 0.750 0.750 0.750 0.750 0.750 0.787 0.787 0.819 0.787 0.866 0.847 0.866 0.875 0.906 0.957 0.945 1.000 1.000 1.000 1.000 1.000 1.000 1.012 19.050 19.050 19.050 19.050 19.050 20.00 20.00 20.80 20.00 22.00 21.50 22.00 22.23 23.00 24.30 24.00 25.400 25.400 25.400 25.400 25.400 25.400 25.700

Root Diameter (in) (mm) 0.608 0.537 0.502 0.537 0.581 0.587 0.622 0.705 0.634 0.721 0.669 0.713 0.661 0.787 0.780 0.791 0.857 0.786 0.750 0.698 0.698 0.906 0.945 15.443 13.640 12.751 13.640 14.757 14.90 15.80 17.90 16.10 18.30 17.00 18.10 16.79 20.00 19.80 20.10 21.768 19.964 19.050 17.729 17.729 23.012 24.000

Efficiency* (%) 24 - 30 34 - 43 38 - 48 54 - 60 54 - 68 32 - 40 57 - 71 67 - 84 69 - 86 62 - 78 68 - 85 70 - 87 31 - 39 66 - 82 67 - 84 69 - 86 19 - 24 29 - 36 32 - 40 37 - 46 50 - 63 59 - 74 69 - 86

3 4"

075

0.2000 0.3333 0.5000 0.1575 0.4724 1.0630 1.7717 0.7874

20mm

079

22mm
7 8 "

087 088 094

1.3780 1.9685 0.1660 1.1811 1.5748 2.1654 0.1000 0.1667 0.2000

24mm

1.00

100

0.2500 0.5000 1.0000 3.0000

Standard EZZE Mount Bearing Supports

20

Miniature Lead Assemblies Reference Number System

NT025 062 RA / 1K / 4N / 12.25 / FS

NUT
Nut will be installed with flange or threaded end toward first end designation. AF AT NF NT 00 = Anti-backlash Series, Flange-Mount Style = Anti-backlash Series, Thread-Mount Style = Standard Series, Flange-Mount Style = Standard Series, Thread-Mount Style = No Nut

DIAMETER CODE
Example: 025 = 1/4 Diameter See pages 16-20 for Diameter Codes

LEAD CODE
Example 062 = 0.0625 Lead See pages 16-20 for Lead Codes

HELIX/MATERIAL

RA
R = Right Hand Thread L = Left Hand Thread NOTE: Not all threads/materials are available for all sizes. A= B= C= S= T = U= Alloy Steel, Rolled Alloy Steel, Milled Alloy Steel, Ground Stainless Steel, Rolled Stainless Steel, Milled Stainless Steel, Ground

FIRST END CONFIGURATION

End Machining
1 = Type 1 2 = Type 2 3 = Type 3 4 = Type 4

1K

(see page 26-27)

Shaft Extension
K = Shaft Extension with Keyway L = Shaft Extension without Keyway N = No Shaft Extension

00 = No End Machining (Screw will be cut to desired length). XX = Custom Machining (Print or specified data must be provided). NOTE: Both Ends must be specified. Omit this code if ordering nut only.

SECOND END CONFIGURATION

Refer to the First End Configuration. NOTE: Both Ends must be specified. Omit this code if ordering nut only.

OVERALL LENGTH (OAL)

Length in inches, 2 place decimal. Omit this code if ordering nut only.

MODIFIER LIST
F (Optional) = Round Flange (with Thread Mount Style only) T (Optional) = Teflon coating S or M Required S = Standard. no additional description required M = Modified, additional description required

ONLINE
helixlinear.com

The specifications and data in this publication are believed to be accurate and reliable. However, it is the responsibility of the product user to determine the suitability of Helix Linear Technologies, Inc. products for a specific application. While defective products will be replaced without charge if promptly returned, no liability is assumed beyond such replacement.

21

TM

TWIN-LEAD screw ASSEMBLIES

Twin-lead acme screws offer dual opposing motion using a single drive system. These one-piece high performance acme screws are made from high alloy steel that is black oxided for protection and can be assembled with HELIX acme nuts, flanges and EZZE-MOUNT bearing supports (see pages 28-29) to form cost effective systems. Twinlead acme screws can be used in molding machines, packaging equipment, food processing machinery, robotics, material handling equipment, tire manufacturing and assembly applications. Twin-Lead screws stocked for delivery without machined ends are listed in the chart below. To order a twin-lead cut to a custom length and/or with machined ends, select a size from the chart below, determine OAL, LH and RH thread length, nut, flange and, if required, EZZE-MOUNT bearing support. Consult the Twin-Lead Reference Number System on page 23 to complete your part number.

LH THREAD SIDE

OAL

RH THREAD SIDE

**

INCOMPLETE THREAD

** Consult chart for incomplete thread length

Diameter Code 012 012 012 018 018 018 018 018 018 024 025 025 025 025 025 025 025 031 032 032

Diameter 1/8 1/8 1/8 3/16 3/16 3/16 3/16 3/16 3/16 6mm 1/4 1/4 1/4 1/4 1/4 1/4 1/4 5/16 8mm 8mm

Lead Code 024 031 039 024 025 031 039 048 050 787 024 025 031 039 048 050 062 100 393 M30

Lead 0.0240 0.0313 0.0394 0.0240 0.0250 0.0313 0.0394 0.0480 0.0500 0.07874 0.0240 0.0250 0.0312 0.0394 0.0480 0.0500 0.0625 0.1000 0.3937 1.1811

Root Diameter 0.098 0.094 0.090 0.177 0.175 0.172 0.168 0.164 0.163 0.197 0.223 0.220 0.214 0.206 0.197 0.195 0.178 0.193 0.217 0.295

Max Overall Length 6 6 6 8 8 8 8 8 8 10 12 12 12 12 12 12 12 16 24 24

Max Usable LH / RH Thread 2.63 2.63 2.63 3.63 3.63 3.63 3.63 3.63 3.63 4.63 5.63 5.63 5.63 5.63 5.63 5.63 5.63 7 .63 11.63 11.63

Incomplete Overlapping Thread 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75 0.75

Page 20 20 20 20 20 20 20 20 20 20 21 21 21 21 21 21 21 21 21 21

22

Miniature TWIN-LEAD ASSEMBLIES Reference Number System

Diameter Lead First End Second End Left Hand Right Hand Left Hand Right Hand

012 - 024 - TA / EK / 4N / 8.50 / 4.25 / 4.25 / AFA / AFA / FS

Screw Thread form codes
Dia. Code 012 012 012 018 018 018 018 018 018 024 025 025 025 025 025 025 025 031 032 Lead Code 024 031 039 024 025 031 039 048 050 787 024 025 031 039 048 050 062 100 393 M30 Dia. 1/8" 1/8" 1/8" 3/16" 3/16" 3/16" 3/16" 3/16" 3/16" 6mm 1/4" 1/4" 1/4" 1/4"4 1/4" 1/4" 1/4" 5/16" 8mm Lead 0.0240 0.0313 0.0394 0.0240 0.0250 0.0313 0.0394 0.0480 0.0200 0.0787 0.0240 0.0250 0.0312 0.0394 0.0480 0.0500 0.0625 0.1000 0.3937 1.1811

Over-all-length (OAL)
Length in inches, 2 place decimal

Material
Note: Not all materials are available for all sizes.

Left hand / right hand thread

Length in inches, 2 place decimal. Note: See figure on page 22.

TA
A = Alloy Steel, Rolled C = Alloy Steel, Ground S = Stainless, Rolled U = Stainless, Ground T = Twin Lead

left hand / right hand acme nut

000000 = No Nut AF = AAB Series, Flange-Mount Style AT = AAB Series, Thread-Mount Style NF = NAB Series, Flange-Mount Style 00 = No Nut To select the nut direction after the nut part #, add: A = Nut Thread or Flange installed toward center of screw B =  Nut Thread or Flange installed toward end of screw

First end / Second End configuration

Note: Both Ends must be specified. Single Bearing Supports are used in conjunction with Type 1N end machining. Double Bearing Supports are used in conjunction with Type 3K, 3L, or 3N end machining. Flanged Fixed Bearing Mounts are used in conjunction with Type 5 end machining.

Modifier list
F = Round Flange S or M Required S = Standard, no additional description required

EK
Shaft Extension (see pages 26-27) K = Shaft Extension with Keyway L = Shaft Extension without Keyway Extension
N = No Shaft Q = Hand Wheel

M = Modified, additional description required

EZZE-MOUNT / End Machining (see pages 26-27)

1 = Type 1 2 = Type 2 3 = Type 3 4 = Type 4 B =  Universal Double Bearing Support End Cap Facing Screw Thread C =  Universal Single Bearing Support D =  Universal Single Bearing Support Flange Facing Screw Thread E =  Universal Double Bearing Support Cap Facing Away From Screw Thread Flanged Double Bearing Support F =  End Cap Facing Screw Thread G =  Flanged Single Bearing Support Facing Away From Screw Thread Flanged Double Bearing Support H =  Facing Away From Screw Thread No End Machining (Screw will be 00 =  cut to desired length XX =  Custom Machining (Print or spedified data must be provided

helixlinear.com
The specifications and data in this publication are believed to be accurate and reliable. However, it is the responsibility of the product user to determine the suitability of Helix Linear Technologies, Inc. products for a specific application. While defective products will be replaced without charge if promptly returned, no liability is assumed beyond such replacement.

23

TM

Lubricants
Proper lubrication is the key to continued performance and reliability of lead screw assemblies. Use E-100 spray and PAG-1 grease lubricants to maximize life of your acme screw assembly.

Benefits
Sheer Stability High Temperature Resistant Corrosion Protection Separation Resistant Extreme Pressure Properties Shelf Stable Water Resistant

Product Name PAG-1 Grease E-100 Spray

Nlgi Grade Number 2 2

OIL VISCOSITY Penetration (Worked) 285 285 Dropping Point 550C 550C Gelling Agent Calcium Calcium CST @40C 96 96 CST @100C 113 113 Temp. Range 15F to 400F 15F to 400F

Net Contents Per Unit 1 Case of 12 1 Case of 12

Part No. NLU-1001 NLU-2001 NLU-1002 NLU-2002

Total Weight 1 lb 13 lb 1 lb 15 lb

HELIX PTFE Dry lubricant

HELIX PTFE is a fluoropolymer (Teflon) based coating and is combined with appropriate resins specially formulated to provide a tough, durable film for dry lubrication. HELIX PTFE offers excellent abrasion and salt spray resistance. The film components stratify during the curing process and most of the fluoropolymer properties (such as low-coefficient of friction and non-stick character) are retained. HELIX PTFE is an excellent lubricant for medical, semiconductor, electronic, high precision and clean applications. Our HELIX PTFE coating increases the efficiency of lead screw assemblies and can be applied to all HELIX lead screws.

Coating Properties Thickness Color Tensile Strength (ASTM D1708) Hardness (ASTM D2240) Abrasion Resistance (ASTM D4060) Adhesion (ASTM D4145) Coefficient of friction (ASTM D1894) Chemical Resistance (ASTM D543) Salt Spray Resistance (ASTM B117-73) Dielectric Strength (ASTM D149) Use Temperature 0.4 - 0.8 MIL Black 3000-12000 PSI 60 HB (Shore D) Excellent OK (A) 0.15 static Excellent >168hr at 5% solution, 35 C (95 F) 100 volts per mil 260 C (500 F) max
Teflon coated HELIX lead screws

24

Machined Ends and Bearing Supports

Nominal Dia-Lead 025-050 025-250 025-333 031-250 031-500 037-062 037-083 037-100 037-125 037-166 037-200 037-250 037-500 037-999 050-100 050-200 050-250 050-500 050-999 062-100 062-125 062-200 062-375 075-100 075-166 075-200 075-333 075-500 087-166 100-100 100-166 100-200 100-250 100-500 100-999

End Code Type 1,2,3 3 3 3 5 5 7 7* 7 7 7* 7* 7 7 6 9 9 8 10 9 12 10 12 10 15 12 12 12 12 15 20 17 17 17 17 20 4 2 2 2 2 2 4 4 4 4 4 4 4 4 4* 6* 6 4 6 6 8 6 6 6 8 8 8 8 8 10 12 10 10 10 10 12 Double

Universal Mounts Single Double

Flange Mounts Single

Contact HELIX Sales Engineers for custom solutions.

EZM-1007 EZM-1007 EZM-1007 EZM-1007 EZM-1007 EZM-1007 EZM-1007 EZM-1007 EZM-1009 EZM-1009 EZM-1008 EZM-3010 EZM-1009 EZM-3012 EZM-3010 EZM-3012 EZM-3010 EZM-3015 EZM-3012 EZM-3012 EZM-3012 EZM-3012 EZM-3015 EZM-2020 EZM-3017 EZM-3017 EZM-3017 EZM-3017 EZM-2020 EZM-4007 EZM-4007 EZM-4007 EZM-4007 EZM-4007 EZM-4007 EZM-4007 EZM-4007 EZM-4009 EZM-4009 EZM-4008 EZM-4010 EZM-4009 EZM-4012 EZM-4010 EZM-4012 EZM-4010 EZM-4015 EZM-4012 EZM-4012 EZM-4012 EZM-4012 EZM-4015 EZM-4020 EZM-4017 EZM-4017 EZM-4017 EZM-4017 EZM-4020

Contact HELIX Sales Engineers for custom solutions.

EZF-1007 EZF-1007 EZF-1007 EZF-1007 EZF-1007 EZF-1007 EZF-1007 EZF-1007 EZF-1009 EZF-1009 EZF-1008 EZF-3010 EZF-1009 EZF-3012 EZF-3010 EZF-3012 EZF-3010 EZF-3015 EZF-3012 EZF-3012 EZF-3012 EZF-3012 EZF-3015 EZF-2020 EZF-3017 EZF-3017 EZF-3017 EZF-3017 EZF-2020 EZF-4007 EZF-4007 EZF-4007 EZF-4007 EZF-4007 EZF-4007 EZF-4007 EZF-4007 EZF-4009 EZF-4009 EZF-4008 EZF-4010 EZF-4009 EZF-4012 EZF-4010 EZF-4012 EZF-4010 EZF-4015 EZF-4012 EZF-4012 EZF-4012 EZF-4012 EZF-4015 EZF-4020 EZF-4017 EZF-4017 EZF-4017 EZF-4017 EZF-4020

* Some journals may show thread tracings. See pages 16-20 for lead and diameter codes.

helixlinear.com
The specifications and data in this publication are believed to be accurate and reliable. However, it is the responsibility of the product user to determine the suitability of Helix Linear Technologies, Inc. products for a specific application. While defective products will be replaced without charge if promptly returned, no liability is assumed beyond such replacement.

25

TM

Machined Ends: Drawings and Codes

Specifying standard machined ends results in quicker deliveries. The machined ends shown below represent designs that are compatible with common application requirements for either simple or fixed bearing support. These standard ends may be machined and ground to finish size.

Type 1K (with keyway) Type (without keyway) Type 1L1L (without keyway)
B D A F C

Type 1K (with keyway)

Type 2K (with keyway) Type 2L (without Type 2L (without keyway) keyway)

B D A F C

Type 2K (with keyway)

Type 3K (with keyway) Type 3K (with keyway) Type 3L (without keyway) Type 3L (without keyway)
B D A F C

.016 .032 E

G E

.016 .032

G E

.016 .032

Driven Support End Single Bearing

Driven Support End Double Bearing

Driven Support End Double Bearing

Type 4K Type (with 4K keyway) (with keyway) Type 4K (with keyway) keyway) Type 4L Type (without 4L (without keyway)
Type 1N

Type 4N Type 4N
Type 4
B B

pe 1N
B D

Type 1N Type 2N
B D D

Type 2N Type 2N
B D B

Type 2N Type Type 3N 3N

B D

Type 3N
B D B D

Type 3N

Type 4L (without keyway)

A F

A F

B D

016 032 E

.016 .032 E

.016 .032 E

.016 .032 E

.016 .032 E

.016 .032 E E

.016 .032

.016 .032 E

G .016 .032

Non-Driven Support End Single Bearing

Non-Driven Support End Double Bearing

Non-Driven Support End Double Bearing

Standard Journal for Pillow Block Single Bearing

Standard Journal for Pillow Block Double Bearing

End Types
1K, 2K, 3K and 4K are designed with a shaft extension and keyway for square keys. 1L, 2L, 3L and 4L are designed with a shaft extension without a keyway. 1N, 2N, 3N and 4N are designed to be a non-driven support end. Double bearing supports use a Type 3N, 3L and 3K. Single bearing supports use Type 1N.

Where standard ends do not satisfy the application requirements, special ends may be machined to customer specifications. Please submit a print for a prompt and competitive quotation.

26

Machined Ends: Drawings and Codes (continued)

Various Custom Machine Ends

TYPE 1 (K, L, N) Typical Journal for Single Bearing Machined End Code 3 5 6 7 8 9 10 12 15 17 20 25 30 A 0.63 0.88 0.88 1.12 1.31 1.38 1.37 2.11 2.15 2.23 2.37 2.68 2.97 B 0.36 0.55 0.55 0.65 0.68 0.72 0.69 0.81 0.84 0.92 1.06 1.12 1.16 E 0.156 0.236 0.236 0.276 0.276 0.315 0.315 0.394 0.433 0.472 0.551 0.591 0.63

TYPE 2 (K, L, N) Typical Journal for Duplexed Bearing A 0.75 1.09 1.09 1.41 1.56 1.69 1.67 2.5 2.59 2.71 2.93 3.27 3.6 B 0.52 0.78 0.78 0.93 0.96 1.04 1 1.2 1.27 1.39 1.61 1.71 1.79 E 0.312 0.472 0.472 0.552 0.552 0.63 0.63 0.788 0.866 0.944 1.102 1.182 1.26

TYPE 3 (K, L, N) Typical Journal for Multiple Sets of Duplexed Bearing A 1.09 1.56 1.56 1.94 2 2.38 2.5 3.29 3.5 3.65 4.03 4.45 4.86 B 0.83 1.26 1.26 1.48 1.44 1.81 1.81 1.99 2.18 2.33 2.71 2.89 3.05 E 0.624 0.944 0.944 1.104 1.06 1.438 1.438 1.576 1.732 1.888 2.204 2.364 2.52 C .093/.092 .125/.124 .125/.124 .187/.186 .250/.249 .250/.249 .312/.311 .406/.405 .500/.499 .500/.499 .625/.624 .750/.749 1.000/.999

COMMON DIMENSIONS FOR TYPE 1, 2, 3 (K, L, N) Lockwasher N/A N/A N/A N/A N/A N/A W-00 W-01 W-02 W-03 W-04 W-05 W-06

D .1251/.1248 .1970/.1967 .2363/.2360 .2757/.2754 .3151/.3148 .3544/.3541 .3939/.3936 .4726/.4723 .5908/.5905 .6695/.6692 .7877/.7873 .9846/.9842 1.1814/1.1810

F N/A N/A N/A 0.063 0.094 0.094 0.125 0.125 0.125 0.125 0.188 0.188 0.25

G N/A N/A N/A 0.34 0.46 0.46 0.5 1 1 1 1 1 1.25

Locknut #5-40 #10-32 #10-32

1 5 5

4-20

16-24 16-24

N-00 N-01 N-02 N-03 N-04 N-05 N-06

Machined End Code 2 4 6 8 10 12 16

TYPE 4 (K, L, N) Typical Journal for Pillow Block A .75 1.38 1.50 2.63 2.63 2.72 2.84 B .25 .50 .75 1.00 1.25 1.50 1.50 D .1251 / .1248 .2501 / .2498 .3751 / .3748 .5000 / .4995 .6250 / .6245 .7500 / .7495 1.0000 / .9995 F N/A .063 .125 .125 .188 .188 .250 G N/A .63 .75 1.50 1.50 1.50 1.50

helixlinear.com
The specifications and data in this publication are believed to be accurate and reliable. However, it is the responsibility of the product user to determine the suitability of Helix Linear Technologies, Inc. products for a specific application. While defective products will be replaced without charge if promptly returned, no liability is assumed beyond such replacement.

27

TM

EZZE-MOUNT: Universal Mount Bearing Support With Motor Mount

Universal Mount with motor mount includes an EZZE-MOUNT block with a motor mount for easy, accurate installation of acme screw assemblies. Note: When selecting the bearing support for an application with high axial loads, the capacities of the bearings and locknuts must be considered. See page 28. EXAMPLE: NT025-062 / U3 / 4N / 12.82 / FS EZM-2020-34 EXAMPLES OF EZM DESIGNATIONS: U1, U2, U3 or U4 = Standard Mount available above UX =  modified, further explanation needed (i.e. - Special Frame)

Part No. EZM-1008-17 EZM-1009-23 EZM-3010-23 EZM-3012-23 EZM-3012-34 EZM-3015-23 EZM-3015-34 EZM-3017-34 EZM-3017-42 EZM-2020-34 EZM-2020-42

Ref. Code U1 U2 U2 U2 U3 U2 U3 U3 U4 U3 U4

Nema Frame Ref. 17 23 23 23 34 23 34 34 42 34 42

AA 1.75 2.50 2.50 2.50 3.25 2.50 3.25 3.25 4.50 3.44 4.50

BB 0.25 0.19 0.19 0.19 0.16 0.19 0.16 0.16 0.19 0.16 0.19

T 3.35 4.10 4.10 4.48 4.92 4.69 5.13 5.56 6.31 5.96 6.71

U 0.25 0.38 0.38 0.38 0.50 0.38 0.50 0.50 0.63 0.50 0.63

S 0.094 0.125 0.125 0.125 0.125 0.125 0.125 0.125 0.188 0.125 0.188

Y 1.75 2.50 2.50 2.50 2.50 2.50 2.50 3.12 3.12 3.44 3.44

W 0.52 0.38 0.38 0.38 0.81 0.38 0.81 0.81 1.56 0.81 1.56

AK .868/.871 1.503/1.506 1.503/1.506 1.503/1.506 2.878/2.882 1.503/1.506 2.878/2.882 2.878/2.882 2.504/2.508 2.878/2.882 2.504/2.508

AJ 1.725 2.625 2.625 2.625 3.875 2.625 3.875 3.875 5.000 3.875 5.000

TAP #8-32 #10-32 #10-32 #10-32 #10-32 #10-32 #10-32 #10-32

1

R 0.19 0.26 0.26 0.10 0.10 0.19 0.13 0.13 0.10 0.10

4"-20 4"-20

#10-32
1

AA Sq.

SECTION A-A
Y

S Keyway 45

Tap 4 Holes on AJ Bolt Circle Dia.

AK M

G W T

BB A

0.020

NOTE:Note: For For complete measurements chart complete EZZE-MOUNT EZZE-MOUNT measurements , see chartsee on page 30. on page xxx.

28

EZZE-MOUNT: Flange Mount Bearing Support With Motor Mount

Flange Mount with motor mount includes an EZZE-MOUNT block with a motor mount for easy, accurate installation of acme screw assemblies. Note: When selecting the bearing support for an application with high axial loads, the capacities of the bearings and locknuts must be considered. See page 28. EXAMPLE: AT050-025 / Y1 / 4N / 12.25 / FS EZF-3017-34

EXAMPLES OF EZF DESIGNATIONS: Y1, Y2, Y3, Y4 = Standard Mount available above YX =  modified, further description needed (i.e. - Special Frame)

Part No. EZF-1008-17 EZF-1009-23 EZF-3010-23 EZF-3012-23 EZF-3012-34 EZF-3015-23 EZF-3015-34 EZF-3017-34 EZF-3017-42 EZF-2020-34 EZF-2020-42

Ref. Code Y1 Y2 Y2 Y2 Y3 Y2 Y3 Y3 Y4 Y3 Y4

Nema Frame Ref. 17 23 23 23 34 23 34 34 42 34 42

AA 1.75 2.50 2.50 2.50 3.25 2.50 3.25 3.25 4.50 3.44 4.50

BB 0.25 0.19 0.19 0.19 0.16 0.19 0.16 0.16 0.19 0.16 0.19

T 2.84 3.41 3.41 3.70 4.14 3.84 4.61 4.62 5.37 4.92 5.67

U 0.25 0.38 0.38 0.38 0.50 0.38 0.50 0.50 0.63 0.50 0.63

S 0.094 0.125 0.125 0.125 0.125 0.125 0.125 0.125 0.188 0.125 0.188

Y 2.2 2.1 2.1 1.81 1.81 1.98 1.98 2.25 2.25 2.37 2.37

W 0.52 0.88 0.88 0.88 1.31 0.88 1.31 1.67 2.41 1.67 2.41

AK .868/.871 1.503/1.506 1.503/1.506 1.503/1.506 2.878/2.882 1.503/1.506 2.878/2.882 2.878/2.882 2.504/2.508 2.878/2.882 2.504/2.508

AJ 1.725 2.625 2.625 2.625 3.875 2.625 3.875 3.875 5.000 3.875 5.000

TAP #8-32 #10-32 #10-32 #10-32 #10-32 #10-32 #10-32 #10-32

1

4"-20 4"-20

#10-32
1

SECTION A-A
G M D Mounting Holes on C Bolt Circle Dia, S Keyway 45

Y
~0.020

Tap 4 Holes on AJ Bolt Circle Dia.

A
U AK

BB AA Sq.

Note: For complete EZZE-MOUNT measurements , see chart on page 32.

helixlinear.com
The specifications and data in this publication are believed to be accurate and reliable. However, it is the responsibility of the product user to determine the suitability of Helix Linear Technologies, Inc. products for a specific application. While defective products will be replaced without charge if promptly returned, no liability is assumed beyond such replacement.

29

TM

EZZE-Mount Universal Mount Single And Double Bearing Support

Universal-Mount Double Double Angular Contact Bearing - use with Type 3 Standard Ends
Universal Double Part No.
SECTION A-A
H K E M F B C A P

A 2.00 2.00 2.75 2.75 3.50 3.50 4.50 5.00

B 1.38 1.38 2.00 2.00 2.22 2.52 2.69 3.03

C 1.50 1.50 2.00 2.00 2.75 2.75 3.38 3.75

D 1.94 2.00 2.38 2.50 3.29 3.50 3.65 4.03

E 0.88 0.88 1.38 1.38 1.25 1.25 1.38 1.50

F 0.25 0.25 0.31 0.31 0.50 0.80 0.62 0.75

EZM-1007 EZM-1008 EZM-1009 EZM-3010 EZM-3012 EZM-3015 EZM-3017 EZM-2020

0.020

G
D

L A

Universal-Mount Single Single Radial Bearing - use with Type 1 Standard Ends
Universal Single Part No. EZM-4007
B M F Q H G L A A

SECTION A-A C

A 2.00 2.00 2.75 2.75 3.50 3.50 4.50 5.00

B 1.38 1.38 2.00 2.00 2.22 2.52 2.69 3.03

C 1.50 1.50 2.00 2.00 2.75 2.75 3.38 3.75

E 0.88 0.88 1.38 1.38 1.25 1.25 1.38 1.50

F 0.25 0.25 0.31 0.31 0.50 0.80 0.62 0.75

P1 E

EZM-4008 EZM-4009 EZM-4010 EZM-4012 EZM-4015 EZM-4017

G = Mounting Surface

EZM-4020

30

P G 1.06 1.06 1.19 1.19 1.38 1.38 1.69 1.72 H 0.50 0.50 0.56 0.56 0.69 0.69 0.84 0.86 J 0.46 0.56 0.56 0.69 1.30 1.30 1.30 1.30 K Shaft Dia. 0.187 0.186 0.250 0.249 0.250 0.249 0.312 0.311 0.406 0.405 0.500 0.499 0.500 0.499 0.625 0.624 L Thru 0.22 0.22 0.28 0.28 0.28 0.28 0.41 0.47 M 0.687 0.687 1.000 1.000 1.187 1.438 1.500 1.625 Bolt Size
1

Thru 0.28 0.28 0.34 0.34 0.41 0.41 0.53 0.66

CBore 0.41 0.41 0.50 0.50 0.62 0.62 0.88 1.00

P1 0.41 0.41 0.56 0.56 1.00 1.00 1.25 1.50

End Code 7 8 9 10 12 15 17 20

4 1 8
3

4 138 16 2 16 2

8 134

8 218 2 214

8 212

G 1.06 1.06 1.19 1.19 1.38 1.38 1.69 1.72

H 0.50 0.50 0.56 0.56 0.69 0.69 0.84 0.86

K Shaft Dia.

L Thru 0.22 0.22 0.28 0.28 0.28 0.28 0.41 0.47

P M 0.687 0.687 1.000 1.000 1.187 1.438 1.500 1.625 Bolt Size
1

Thru 0.28 0.28 0.34 0.34 0.41 0.41 0.53 0.66

CBore 0.41 0.41 0.50 0.50 0.62 0.62 0.88 1.00

P1 0.41 0.41 0.56 0.56 1.00 1.00 1.25 1.50

Q 0.19 0.19 0.38 0.38 0.33 0.33 0.38 0.5

End Code 7 8 9 10 12 15 17 20

4 1 8
3

4 138 16 2 16 2
3

8 1 4

8 218 2 2 4
1

8 212

ONLINE
helixlinear.com
The specifications and data in this publication are believed to be accurate and reliable. However, it is the responsibility of the product user to determine the suitability of Helix Linear Technologies, Inc. products for a specific application. While defective products will be replaced without charge if promptly returned, no liability is assumed beyond such replacement.

31

TM

Ezze-Mount Flange-Mount Single And Double Bearing Support

Flange-Mount Double Double Angular Contact Bearing - use with Type 3 Standard Ends

E F G H J R 0.03 MAX K A A 45o

Flanged Double Part No.

D

A 1.88 1.88 2.00 2.00 2.50 2.70 3.38 3.38

B 2.44 2.44 2.60 2.60 3.17 3.27 4.03 4.03

C 1.875 1.875 2.000 2.000 2.500 2.750 3.250 3.250

D Thru 0.266 0.266 0.266 0.266 0.266 0.281 0.344 0.344

Counterbore 0.44 0.44 0.44 0.44 0.44 0.44 0.53 0.53

EZF-1007 EZF-1008 EZF-1009 EZF-3010 EZF-3012

0.020
L

P C A

EZF-3015 EZF-3017 EZF-2020

SECTION A-A = Mounting Surface

Flange-Mount Single Single Radial Bearing - use with Type 1 Standard Ends

G J Q Ref. R 0.03 MAX A L A D 45

o

Flanged Single Part No. EZF-4007 EZF-4008 EZF-4009 EZF-4010 EZF-4012

A 1.88 1.88 2.00 2.00 2.50 2.70 3.38 3.38

B 2.44 2.44 2.60 2.60 3.17 3.27 4.03 4.03

C 1.875 1.875 2.000 2.000 2.500 2.750 3.250 3.250

D Thru 0.266 0.266 0.266 0.266 0.266 0.281 0.344 0.344

Counterbore 0.44 0.44 0.44 0.44 0.44 0.44 0.53 0.53

M SECTION A-A = Mounting Surface C A

EZF-4015 EZF-4017 EZF-4020

32

E 1.94 2.00 2.38 2.50 3.29 3.50 3.65 4.03

F 1.44 1.44 1.81 1.81 1.99 2.10 2.33 2.71

G 1.06 1.06 1.33 1.33 1.57 1.71 1.93 1.98

H 0.82 0.82 1.09 1.09 1.38 1.50 1.63 1.72

J 0.50 0.50 0.71 0.71 0.75 0.88 0.94 1.03

K Shaft Dia. 0.187-0.186 0.250-0.249 0.250-0.249 0.312-0.311 0.406-0.405 0.500-0.499 0.500-0.499 0.625-0.624

L 1.3775-1.3770 1.3775-1.3770 1.4957-1.4951 1.4957-1.4951 1.8894-1.8888 2.1256-2.1250 2.5193-2.5185 2.5193-2.5185

M 0.188 0.188 0.188 0.190 0.312 0.312 0.312 0.312

P 0.063 0.094 0.094 0.125 0.125 0.125 0.125 0.188

End Code 7 8 9 10 12 15 17 20

G 1.00 1.00 1.00 1.00 1.15 1.25 1.32 1.47

J 0.40 0.40 0.44 0.44 0.55 0.63 0.63 0.72

K Shaft Dia.

L 1.3775 1.3770 1.3775 1.3770 1.4957 1.4951 1.4957 1.4951 1.8894 1.8888 2.1256 2.1250 2.5193 2.5185 2.5193 2.5185

M 0.188 0.188 0.188 0.190 0.312 0.312 0.312 0.312

Q 0.13 0.13 0.13 0.13 0.13 0.20 0.20 0.20

End Code 7 8 9 10 12 15 17 20

ONLINE
helixlinear.com
The specifications and data in this publication are believed to be accurate and reliable. However, it is the responsibility of the product user to determine the suitability of Helix Linear Technologies, Inc. products for a specific application. While defective products will be replaced without charge if promptly returned, no liability is assumed beyond such replacement.

33

Our products make us industry leaders. Our people make us world class.
Christopher M. Nook CEO H E L I X L i n e a r Te c h n o l o g i e s , I n c .

TM

2 3 2 0 0 C o m m e r c e Pa r k R o a d | B e a ch w o o d , O H 4 4 1 2 2 U S A | 1- 8 5 5 - H E L I X LT | w w w . h e l i x l i n e a r. c o m