GT600EX

TRUCK CRANE
front
left
60 METRIC TONS CAPACITY
rear
right
WORKING RANGE
5
DIMENSION
25
45
[Telescoping mode ]
65 60
IN SW IL 50 A T 3,6 R
43m
55
Bo o
43m
81 70
Bo o
43. 0m 60 Bo om 55
35. 0m
40 50 48 40 35 30 25 30 20 20 10 0 15
Lifting height (m)
m+ 8.8 m
m+ 15 .2
50
Jib
Jib
45
5,480 MIN. 11,000 - MAX. 43,000
Bo o
27
1,800
.0m
11 .
15 .0m
19 . 0m
Bo
3,730
Bo om
20
295
10 5
1,965
30 35 40 0
2,385
1,385
10
Working Radius (m)
15
20
25
2,580 3,915 10,950 13,170
100 1,400
2,900 1,865
Continuing technical development requires Tadano to retain the right to make specifications, equipment and price changes without notice.
*Some specifications are subject to change
(International Division) 4-12, Kamezawa 2-chome,Sumida-ku Tokyo 130-0014,Japan Tel:81-3-3621-7750 Fax:81-3-3621-7785 http://www.tadano.co.jp/indexe.htm E-mail:tdnihq@tadano.co.jp
GT-600EX-1-E-10-3-03-43-464-A Printed in Japan
MIN. 2,390 MID. 4,600 MAX. 6,800
2,820
om
om Bo
13
0m
om Bo
155
This newly designed truck crane has been crafted in Japan using the accumulated engineering prowess of Tadano. It has a capacity of 60 metric tons.
Maximum traveling speed: 84 km/h Maximum gradient: 58%
Carrier
Crane capacity : 60,000 kg 5-section long boom : 43.0 m 2-staged bi-hold jib : 8.8 / 15.2 m Strong winches : 5,600 kgf
A high-performance engine that meets the EURO standards is mounted on the carrier. The steering ability of the wheel when the carrier is in a stop condition, along with the adoption of a new hydraulic suspension system, substantially improves the mobility of the crane. In addition, the flat carrier fender eases access to the upper structure.
Two-person, full-width cabin

The full-sized cabin accommodates two passengers. The telescoping and tilting steering wheel can be manipulated to adjust the driving position to suit the operator. Furthermore, the three-way adjustable air-suspended seat, with headrest, allows comfortable traveling for the operator.
Engine
The engine used in this model of crane is made by Daimler and has a maximum output of 260 kW. It satisfies the EURO standards and is environment-friendly.
Daimler OM457LA 4-cycle, turbo charged and inter cooled Max. output 260kW {353PS} Max. torque 1,850Nm {188kgf-m}
Strengthened functions and equipment The GT-600EX has a newly developed rounded solid boom of 43.0 mthe longest boom in its class. In addition, with the introduction of a new Automatic Moment Limiter model, the AML-C offers customers a safer operating environment. Further, improved traveling performance ensures a comfortable drive to work sites.
Multistage transmission: 9-speed transmission forward Differential lock Electrically adjustable and defrosting rear view mirror Cruise control Emergency steering pump for greater safety Tool box
Hydraulic suspension
All axles are equipped with a hydraulic suspension system.
Crane
The 43-meter boom is the longest in its class. The rounded boom is made of high tensile steel, which allows for decreased boom weight as well as increased boom strength. In addition, the high-performance AML-C secures safe operation. Two telescoping modes [] & []
The operator can select either of the two boom telescoping modes based on the designated job plan. This provides enhanced crane capabilities in accordance with work needs.
5 25 45
Bi-fold fly jib

A two-stage, bi-fold lattice-type jib is used for this model of crane. It is offsettable at 5, 25, and 45 to enable the operator to carry out jobs that require extra reaching ability.
Rounded construction boom

Mode []
Mode [] is extension of 2nd section only. Then synchronized extension of 3rd , 4th and 5th sections.
Mode []
Mode [] is synchronized extension of 3rd , 4th and 5th sections. Then 2nd section independently.
The rounded boom constructed of high tensile steel contributes to decreased boom weight and increased boom strength.
Two winches with cable follower Assist cylinder for jib

When mounting and storing the fly jib, assistant hydraulic cylinders ensure operation, thus increasing the work efficiency of jib mounting and storage. Both the main winch and the auxiliary winch use wire rope with powerful 5.6-ton line pull and operate at high speeds, thus serving to enhance work efficiency.
Automatic moment limiter [AML-C]

The easy-to-view AML-C of Tadanos latest model monitors and displays crane operating conditions (such as boom length, boom angle, load radius, swing position, actual load, total rated load, outrigger position, jib length, jib offset angle, and number of parts of line) to secure safety in operation. In addition, the AML-C is provided with a working range limit function.
The AML-C detects the state of overloading to prevent damage to the boom and overturning of the crane. The emergency release function restores crane operation even when the crane is automatically stopped due to overloading. In view of stringent safety measures to be taken, it is advisable that the emergency release switch key be kept by a work supervisor.
Operator Comfort
The crane cabin provides improved livability and offers the operator a comfortable working environment.
The crane operating levers are of finger control type and surely and steadily respond to the operator.
Control of asymmetric outrigger extension width
A : Over-front B : Over-rear C : Over-side D : Over-side E : Rated Load (O/R max.6.8m) F : Rated Load (O/R mid.4.6m) G : Rated Load (O/R min.2.39m) G
There is no need to detach the counterweights of the GT-600EX when traveling on roads. Thus, crane operations can be started once the crane has arrived at a work site.
At all times, the new type AML-C system offers a maximum work value D for each work area. Even when the outrigger extension width differs between the front and the rear of the crane, or between its two sides, the AML-C detects such working conditions and displays the optimal value.
B O/R MIN O/R MID O/R MAX
Minimum extension ( 2.39 m ) Middle extension ( 4.6 m ) Maximum extension ( 6.8 m )

GT600EX

Uploaded by

Copyright:

Available Formats

GT600EX

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

GT600EX

Uploaded by

Copyright:

Available Formats

TRUCK CRANE

60 METRIC TONS CAPACITY

Lifting height (m)

5,480 MIN. 11,000 - MAX. 43,000

Working Radius (m)

2,580 3,915 10,950 13,170

*Some specifications are subject to change

GT-600EX-1-E-10-3-03-43-464-A Printed in Japan

MIN. 2,390 MID. 4,600 MAX. 6,800

Two-person, full-width cabin

Bi-fold fly jib

Rounded construction boom

Two winches with cable follower Assist cylinder for jib

Automatic moment limiter [AML-C]

Control of asymmetric outrigger extension width

B O/R MIN O/R MID O/R MAX

Minimum extension ( 2.39 m ) Middle extension ( 4.6 m ) Maximum extension ( 6.8 m )

You might also like