Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 189 views

    UG 45 Calculation

    Uploaded by

    nirga
    The document contains specifications for the minimum thickness of pressure retaining components in a manhole tug45 system. It lists the internal diameters, materials, and minimum required thicknesses for various pipes and nozzles. Calculations are provided for determining the minimum required thicknesses based on internal and external pressures using equations from industry standards. Thickness values are also provided from a table in the UG-45 standard, and specifications state that the greater of the calculated or table values must be used, along with considerations for corrosion allowance and external loads.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLS, PDF, TXT or read online from Scribd

    UG 45 Calculation

    Uploaded by

    nirga
    189 views7 pages
    The document contains specifications for the minimum thickness of pressure retaining components in a manhole tug45 system. It lists the internal diameters, materials, and minimum required thicknesses for various pipes and nozzles. Calculations are provided for determining the minimum required thicknesses based on internal and external pressures using equations from industry standards. Thickness values are also provided from a table in the UG-45 standard, and specifications state that the greater of the calculated or table values must be used, along with considerations for corrosion allowance and external loads.

    Original Description:

    UG 45 Calculation

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document contains specifications for the minimum thickness of pressure retaining components in a manhole tug45 system. It lists the internal diameters, materials, and minimum required thicknesses for various pipes and nozzles. Calculations are provided for determining the minimum required thicknesses based on internal and external pressures using equations from industry standards. Thickness values are also provided from a table in the UG-45 standard, and specifications state that the greater of the calculated or table values must be used, along with considerations for corrosion allowance and external loads.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    189 views7 pages

    UG 45 Calculation

    Uploaded by

    nirga
    The document contains specifications for the minimum thickness of pressure retaining components in a manhole tug45 system. It lists the internal diameters, materials, and minimum required thicknesses for various pipes and nozzles. Calculations are provided for determining the minimum required thicknesses based on internal and external pressures using equations from industry standards. Thickness values are also provided from a table in the UG-45 standard, and specifications state that the greater of the calculated or table values must be used, along with considerations for corrosion allowance and external loads.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 7

    MANHOLE tUG45 = ta

    NOZ

    M1
    M2
    M3
    M4
    M5
    M6
    M7
    M8
    M9
    M10
    M11
    M12
    M13
    I1
    I1
    I2
    I3-1
    I3-2
    I3-3
    I3-4
    I4
    I4
    I5
    I6
    I6
    I7
    I7
    I8
    I8
    I9
    I9
    I10
    I10
    I11
    I11
    L2A
    O
    OF
    S1
    S2
    S3
    S4
    S5
    S6
    S7
    S8

    DIAM

    Diam. ID
    of Shell

    inch

    mm

    Mpa

    18
    18
    18
    18
    18
    18
    18
    18
    18
    18
    18
    18
    18
    10
    8
    16
    HOLD
    HOLD
    HOLD
    HOLD
    6
    4
    4
    4
    3
    6
    4
    6
    4
    10
    8
    22
    20
    6
    4
    8
    18
    20
    3
    3
    3
    3
    3
    3
    3
    3

    1600
    2200
    2200
    2800
    2800
    2800
    2800
    2800
    2800

    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8

    2200
    2800
    2800
    2200
    2800

    2200
    595
    2800
    2800
    2800
    2800
    2800
    2800
    1026
    2800
    2200
    2800
    2800
    2800
    2800
    2800
    2800
    2800

    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1

    internal

    external

    ta

    Mpa

    Mpa

    mm

    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030

    0.101
    0.101
    0.101
    0.101
    0.101
    0.101
    0.101
    0.101
    0.101
    0.101
    0.101
    0.101
    0.101
    0.100
    0.101
    0.100
    0.101
    0.101
    0.101
    0.101
    0.100
    0.101
    0.100
    0.100
    0.101
    0.100
    0.101
    0.100
    0.101
    0.100
    0.101
    0.100
    0.101
    0.100
    0.101
    0.100
    0.101
    0.100
    0.100
    0.100
    0.100
    0.100
    0.100
    0.100
    0.100
    0.100

    1
    1
    1
    1
    1
    1
    1.4
    1
    1
    1.4
    1
    1
    1
    1
    1
    1
    1
    1

    S9
    S10
    S11
    S12
    T1
    T2
    T3
    T4
    T5
    VO

    3
    4
    4
    3
    3
    3
    3
    3
    3
    14
    2
    2

    2800
    2200
    2800
    2200
    2200
    2800
    2800
    2800
    2800
    2200
    2800

    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8
    70.8

    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1

    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030
    0.030

    0.100
    0.100
    0.100
    0.100
    0.100
    0.100
    0.100
    0.100
    0.100
    0.101
    0.100
    0.100

    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1

    tr16b

    trb2

    trb

    trb3

    tb

    t UG45

    mm

    mm

    mm

    mm

    mm

    mm

    1.5
    1.5
    1.5
    1.5
    1.5
    1.5
    1.5
    1.5
    1.5
    1.5
    1.5
    1.5
    1.5
    1.5875
    1.5
    1.5
    1.5
    1.5
    1.5875
    1.5875
    1.5875
    1.5875
    1.5875
    1.5875
    1.5875
    1.5875
    1.5875
    1.5875
    1.5875
    1.5875
    1.5875
    1.5875
    1.5875
    1.5875
    1.5875
    1.5875
    1.5875
    1.5875
    1.5875
    1.5875
    1.5875
    1.5875
    1.5875
    1.5875
    1.5875
    1.5875

    1.1459
    1.5756
    1.5756
    2.0053
    2.0053
    2.0053
    2.0053
    2.0053
    2.0053
    0.0000
    1.5756
    2.0053
    2.0053
    1.5550
    0.0000
    1.9791
    0.0000
    0.0000
    0.0000
    0.0000
    1.5550
    0.0000
    0.4206
    1.9791
    0.0000
    1.9791
    0.0000
    1.9791
    0.0000
    1.9791
    0.0000
    1.9791
    0.0000
    1.9791
    0.0000
    0.7252
    0.0000
    1.9791
    1.5550
    1.9791
    1.9791
    1.9791
    1.9791
    1.9791
    1.9791
    1.9791

    1.5000
    1.5756
    1.5756
    2.0053
    2.0053
    2.0053
    2.0053
    2.0053
    2.0053
    1.5000
    1.5756
    2.0053
    2.0053
    1.5875
    1.5000
    1.9791
    1.5000
    1.5000
    1.5875
    1.5875
    1.5875
    1.5875
    1.5875
    1.9791
    1.5875
    1.9791
    1.5875
    1.9791
    1.5875
    1.9791
    1.5875
    1.9791
    1.5875
    1.9791
    1.5875
    1.5875
    1.5875
    1.9791
    1.5875
    1.9791
    1.9791
    1.9791
    1.9791
    1.9791
    1.9791
    1.9791

    8.34
    8.34
    8.34
    8.34
    8.34
    8.34
    8.34
    8.34
    8.34
    8.34
    8.34
    8.34
    8.34
    8.11
    7.16
    8.34
    #N/A
    #N/A
    #N/A
    #N/A
    6.22
    5.27
    5.27
    5.27
    4.80
    6.22
    5.27
    6.22
    5.27
    8.11
    7.16
    8.34
    8.34
    6.22
    5.27
    7.16
    8.34
    8.34
    4.80
    4.80
    4.80
    4.80
    4.80
    4.80
    4.80
    4.80

    1.5000
    1.5756
    1.5756
    2.0053
    2.0053
    2.0053
    2.0053
    2.0053
    2.0053
    1.5000
    1.5756
    2.0053
    2.0053
    1.5875
    1.5000
    1.9791
    #N/A
    #N/A
    #N/A
    #N/A
    1.5875
    1.5875
    1.5875
    1.9791
    1.5875
    1.9791
    1.5875
    1.9791
    1.5875
    1.9791
    1.5875
    1.9791
    1.5875
    1.9791
    1.5875
    1.5875
    1.5875
    1.9791
    1.5875
    1.9791
    1.9791
    1.9791
    1.9791
    1.9791
    1.9791
    1.9791

    1.5000
    1.5756
    1.5756
    2.0053
    2.0053
    2.0053
    2.0053
    2.0053
    2.0053
    1.5000
    1.5756
    2.0053
    2.0053
    1.5875
    1.5000
    1.9791
    #N/A
    #N/A
    #N/A
    #N/A
    1.5875
    1.5875
    1.5875
    1.9791
    1.5875
    1.9791
    1.5875
    1.9791
    1.5875
    1.9791
    1.5875
    1.9791
    1.5875
    1.9791
    1.5875
    1.5875
    1.5875
    1.9791
    1.5875
    1.9791
    1.9791
    1.9791
    1.9791
    1.9791
    1.9791
    1.9791

    t r16b

    minimum neck thickness require


    pressure using UG
    applicable.
    The effects of external forces an
    loads (see UG
    UG-22
    loadings shall not exceed 70% of

    Minimum Thickness of Pressure


    the special provisions listed belo
    permitted for shells and heads, a
    product form and material, shall
    any corrosion allowance. loading
    allowable tensile stress for the n

    t rb 1

    Pint ernal R s

    S E 0 . 6 Pin

    t rb2

    Pexternal Rshell

    S E 0.6 Pexternal

    t rb max t rb 1 ; t rb 2
    t rb 3 TABLE

    UG

    t b min t rb 3 ; t rb 4

    1.5875
    1.5875
    1.5875
    1.5875
    1.5875
    1.5875
    1.5875
    1.5875
    1.5875
    1.5875
    1.5875
    1.5875

    1.9791
    1.5550
    1.9791
    1.5550
    1.5550
    1.9791
    1.9791
    1.9791
    1.9791
    0.0000
    1.5550
    1.9791

    1.9791
    1.5875
    1.9791
    1.5875
    1.5875
    1.9791
    1.9791
    1.9791
    1.9791
    1.5875
    1.5875
    1.9791

    4.80
    5.27
    5.27
    4.80
    4.80
    4.80
    4.80
    4.80
    4.80
    8.34
    3.42
    3.42

    1.9791
    1.5875
    1.9791
    1.5875
    1.5875
    1.9791
    1.9791
    1.9791
    1.9791
    1.5875
    1.5875
    1.9791

    1.9791
    1.5875
    1.9791
    1.5875
    1.5875
    1.9791
    1.9791
    1.9791
    1.9791
    1.5875
    1.5875
    1.9791

    t UG

    45

    max

    t ra

    minimum neck thickness required for internal and external


    pressure using UG-27 and UG-28 (plus corrosion allowance), as
    applicable.
    The effects of external forces and moments from supplemental
    loads (see UG-22) shall be considered. Shear stresses caused by
    loadings shall not exceed 70% of the allowable tensile stress for
    Minimum Thickness of Pressure Retaining Components. Except for
    the special provisions listed below, the minimum thickness
    permitted for shells and heads, after forming and regardless of
    product form and material, shall be 116 in. (1.5 mm) exclusive of
    any corrosion allowance. loadings shall not exceed 70% of the
    allowable tensile stress for the nozzle material.

    Pint ernal R shell

    S E 0 . 6 Pint ernal

    Pexternal Rshell

    S E 0.6 Pexternal

    max t rb 1 ; t rb 2 ; t r 16 b
    TABLE

    UG 45

    min t rb 3 ; t rb 4

    45

    max

    t ra

    ; t rb

    TABLE UG-45:
    Nominal Size

    in.

    mm

    0.125

    0.060

    1.51

    0.25

    0.077

    1.96

    0.375

    0.080

    2.02

    0.5

    0.095

    2.42

    0.75

    0.099

    2.51

    0.116

    2.96

    1.25

    0.123

    3.12

    1.5

    0.127

    3.22

    0.135

    3.42

    2.5

    0.178

    4.52

    0.189

    4.80

    3.5

    0.198

    5.02

    0.207

    5.27

    0.226

    5.73

    0.245

    6.22

    0.282

    7.16

    10

    0.319

    8.11

    12

    0.328

    8.34

    14

    0.328

    8.34

    16

    0.328

    8.34

    18

    0.328

    8.34

    20

    0.328

    8.34

    22

    0.328

    8.34

    24

    0.328

    8.34

    26

    0.328

    8.34

    28

    0.328

    8.34

    30

    0.328

    8.34

    32

    0.328

    8.34

    34

    0.328

    8.34

    36

    0.328

    8.34

    inch

    You might also like