Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 97 views

    Isolation Tecgniques

    Uploaded by

    Kr Prajapat
    Local oxidation of silicon (LOCOS) and shallow trench isolation (STI) are two common techniques for isolating transistors in semiconductor fabrication. LOCOS involves growing thermal oxide around active areas defined by a nitride mask, resulting in a "bird's beak" shape and lost surface area. STI involves etching trenches, growing a liner oxide, and filling the trenches with deposited oxide to achieve zero field encroachment and allow for higher density transistors. While STI better supports modern sub-0.5 micron technologies, LOCOS uses a simpler process flow and results in higher quality thermal oxide.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOCX, PDF, TXT or read online from Scribd

    Isolation Tecgniques

    Uploaded by

    Kr Prajapat
    97 views2 pages
    Local oxidation of silicon (LOCOS) and shallow trench isolation (STI) are two common techniques for isolating transistors in semiconductor fabrication. LOCOS involves growing thermal oxide around active areas defined by a nitride mask, resulting in a "bird's beak" shape and lost surface area. STI involves etching trenches, growing a liner oxide, and filling the trenches with deposited oxide to achieve zero field encroachment and allow for higher density transistors. While STI better supports modern sub-0.5 micron technologies, LOCOS uses a simpler process flow and results in higher quality thermal oxide.

    Original Description:

    isolation

    Original Title

    isolation tecgniques.docx

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Local oxidation of silicon (LOCOS) and shallow trench isolation (STI) are two common techniques for isolating transistors in semiconductor fabrication. LOCOS involves growing thermal oxide around active areas defined by a nitride mask, resulting in a "bird's beak" shape and lost surface area. STI involves etching trenches, growing a liner oxide, and filling the trenches with deposited oxide to achieve zero field encroachment and allow for higher density transistors. While STI better supports modern sub-0.5 micron technologies, LOCOS uses a simpler process flow and results in higher quality thermal oxide.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    97 views2 pages

    Isolation Tecgniques

    Uploaded by

    Kr Prajapat
    Local oxidation of silicon (LOCOS) and shallow trench isolation (STI) are two common techniques for isolating transistors in semiconductor fabrication. LOCOS involves growing thermal oxide around active areas defined by a nitride mask, resulting in a "bird's beak" shape and lost surface area. STI involves etching trenches, growing a liner oxide, and filling the trenches with deposited oxide to achieve zero field encroachment and allow for higher density transistors. While STI better supports modern sub-0.5 micron technologies, LOCOS uses a simpler process flow and results in higher quality thermal oxide.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    You are on page 1of 2

    1.

    2 Isolation Techniques
    Thermal grown oxide is mainly used as isolation material in semiconductor fabrication. For the isolation of neighboring MOS transistors there exist two techniques, namely Local Oxidation of Silicon and Shallow Trench Isolation. The differences in their process flow and their final oxide shapes are described in the following.

    1.2.1 Local Oxidation of Silicon


    Local Oxidation of Silicon (LOCOS) is the traditional isolation technique. At first a very thin silicon oxide layer is grown on the wafer, the so-called pad oxide. Then a layer of silicon nitride is deposited which is used as an oxide barrier. The pattern transfer is performed by photolithography. After lithography the pattern is etched into the nitride. The result is the nitride mask as shown in Fig. 1.1a, which defines the active areas for the oxidation process. The next step is the main part of the LOCOS process, the growth of the thermal oxide. After the oxidation process is finished, the last step is the removal of the nitride layer. The main drawback of this technique is the so-called bird's beak effect and the surface area which is lost to this encroachment. The advantages of LOCOS fabrication are the simple process flow and the high oxide quality, because the whole LOCOS structure is thermally grown.

    Figure 1.1: Process sequence for local oxidation of silicon (LOCOS).

    1.2.2 Shallow Trench Isolation


    The Shallow Trench Isolation (STI) is the preferred isolation technique for the sub-0.5 m technology, because it completely avoids the bird's beak shape characteristic. With its zero oxide field encroachment STI is more suitable for the increased density requirements, because it allows to form smaller isolation regions. The STI process starts in the same way as the LOCOS process. The first difference compared to LOCOS is that a shallow trench is etched into the silicon substrate, as shown in Fig. 1.2a. After underetching of the oxide pad, also a thermal oxide in the trench is grown, the socalled liner oxide (see Fig. 1.2c). But unlike with LOCOS, the thermal oxidation process is stopped after the formation of a thin oxide layer, and the rest of the trench is filled with a deposited oxide (see Fig. 1.2d). Next, the excessive (deposited) oxide is removed with chemical mechanical planarization. At last the nitride mask is also removed. The price for saving space with STI is the larger number of different process steps.

    Figure 1.2: Steps in a typical shallow trench isolation (STI) process flow.

    You might also like