Lampiran C1.

HASIL ANALISIS MODEL I (STABLE)

94
Lampiran C2. HASIL ANALISIS MODEL I (XSTABL)
XSTABL File: MODELI 7-20-08 4:08

******************************************
* X S T A B L *
* *
* Slope Stability Analysis *
* using the *
* Method of Slices *
* *
* Copyright (C) 1992 - 99 *
* Interactive Software Designs, Inc. *
* Moscow, ID 83843, U.S.A. *
* *
* All Rights Reserved *
* *
* Ver. 5.203 96 - 1999 *
******************************************

Problem Description : XSTABLE

-----------------------------
SEGMENT BOUNDARY COORDINATES
-----------------------------

3 SURFACE boundary segments

Segment x-left y-left x-right y-right Soil Unit

No. (m) (m) (m) (m) Below Segment

1 .0 10.0 10.0 10.0 1

2 10.0 10.0 30.0 30.0 1

95
 3 30.0 30.0 50.0 30.0 1

--------------------------
ISOTROPIC Soil Parameters
--------------------------

1 Soil unit(s) specified

Soil Unit Weight Cohesion Friction Pore Pressure Water

Unit Moist Sat. Intercept Angle Parameter Constant Surface
No. (kN/m3) (kN/m3) (kPa) (deg) Ru (kPa) No.

1 20.0 20.0 10.0 15.00 .000 .0 0

A critical failure surface searching method, using a random

technique for generating CIRCULAR surfaces has been specified.

1000 trial surfaces will be generated and analyzed.

100 Surfaces initiate from each of 10 points equally spaced

along the ground surface between x = .0 m
and x = 10.0 m

Each surface terminates between x = 30.0 m

and x = 50.0 m

Unless further limitations were imposed, the minimum elevation

at which a surface extends is y = 5.0 m

96
* * * * * DEFAULT SEGMENT LENGTH SELECTED BY XSTABL * * * * *

3.0 m line segments define each trial failure surface.

---------------------
ANGULAR RESTRICTIONS
---------------------

The first segment of each failure surface will be inclined

within the angular range defined by :

Lower angular limit := -45.0 degrees

Upper angular limit := (slope angle - 5.0) degrees

Factors of safety have been calculated by the :

* * * * * SIMPLIFIED BISHOP METHOD * * * * *

The most critical circular failure surface

is specified by 13 coordinate points

Point x-surf y-surf

No. (m) (m)

1 10.00 10.00
2 12.92 10.68
3 15.78 11.60
4 18.54 12.76
5 21.20 14.15
6 23.74 15.75
7 26.13 17.57
8 28.36 19.57
9 30.42 21.76
10 32.28 24.10

97
 11 33.95 26.60
12 35.39 29.23
13 35.74 30.00

**** Simplified BISHOP FOS = .552 ****

********************************************************************
** **
** Out of the 1000 surfaces generated and analyzed by XSTABL, **
** 90 surfaces were found to have MISLEADING FOS values. **
** **
********************************************************************

The following is a summary of the TEN most critical surfaces

Problem Description : XSTABLE

FOS Circle Center Radius Initial Terminal Resisting

(BISHOP) x-coord y-coord x-coord x-coord Moment
(m) (m) (m) (m) (m) (kN-m)

1. .552 3.35 45.17 35.79 10.00 35.74 3.335E+04

2. .554 3.10 46.28 36.93 10.00 36.22 3.538E+04
3. .561 2.87 48.82 39.46 10.00 37.54 4.102E+04
4. .562 1.23 51.47 42.39 10.00 37.75 4.337E+04
5. .574 9.83 37.23 27.23 10.00 36.05 3.132E+04
6. .576 -1.88 45.76 37.68 10.00 32.32 2.412E+04
7. .579 10.55 36.13 26.13 10.00 35.93 3.072E+04
8. .586 7.52 45.45 35.53 10.00 39.48 4.585E+04
9. .588 3.91 52.68 43.11 10.00 40.54 5.451E+04
10. .588 .70 58.12 49.01 10.00 40.81 5.978E+04

* * END OF FILE * * *

98
Lampiran C3. HASIL ANALISIS MODEL I (JOZLOPE)

99
Lampiran C4. HASIL ANALISIS MODEL II (GALENA)

100
Lampiran C5. HASIL ANALISIS MODEL II (STABLE)
Bishop
P0_273.sta
Testdata : VS GALENA
01/08/08 01:20:20 AM

***********************************************
* BISH module -- Bishop Slip Circle Analysis *
***********************************************

GRID 1
***************

Circles through point ( 8.00 0.00 )

SAFETY FACTORS
**************

X 4.0 7.6 11.1 14.7 18.2 21.8 25.3 28.9 32.4 36.0

42.0 -0.01 2.13 1.77 1.56 1.49 1.53 1.63 -0.01 -0.01 -0.01
38.4 -0.01 2.30 1.85 1.62 1.51 1.52 1.62 1.76 -0.01 -0.01
34.9 -0.01 2.51 1.97 1.67 1.53 1.53 1.62 1.76 -0.01 -0.01
31.3 -0.01 2.80 2.08 1.72 1.57 1.55 1.63 1.78 -0.01 -0.01
27.8 -0.01 3.20 2.21 1.78 1.62 1.58 1.66 1.82 2.04 -0.01
24.2 -0.01 3.70 2.38 1.85 1.70 1.66 1.70 1.87 2.10 -0.01
20.7 -0.01 -0.05 2.57 1.97 1.77 1.75 1.79 1.96 2.21 -0.01
17.1 -0.01 -0.05 2.82 2.07 1.87 1.87 1.94 2.10 2.37 2.71
13.6 -0.01 -0.05 3.25 2.19 2.02 2.08 2.17 2.31 2.59 2.95
10.0 -0.01 -0.05 3.65 2.48 2.29 2.38 2.49 2.63 2.89 3.29

****************************************************************

101
* Minimum safety factor = 1.491 *
* For circle at 18.220 42.000 radius 43.226 *
****************************************************************

GRID 2
***************

Circles through point ( 2.00 0.00 )

SAFETY FACTORS
**************

X 4.0 7.6 11.1 14.7 18.2 21.8 25.3 28.9 32.4 36.0

42.0 3.14 2.30 1.79 1.57 1.54 1.60 1.72 -0.01 -0.01 -0.01
38.4 3.78 2.51 1.85 1.61 1.55 1.60 1.72 -0.01 -0.01 -0.01
34.9 4.78 2.73 1.94 1.66 1.57 1.61 1.73 -0.01 -0.01 -0.01
31.3 -0.05 3.00 2.02 1.71 1.60 1.63 1.75 1.93 -0.01 -0.01
27.8 -0.05 3.35 2.14 1.78 1.67 1.67 1.79 1.97 -0.01 -0.01
24.2 -0.05 3.89 2.24 1.87 1.74 1.74 1.86 2.05 -0.01 -0.01
20.7 -0.05 4.49 2.39 1.95 1.85 1.86 1.95 2.16 2.43 -0.01
17.1 -0.05 5.42 2.57 2.09 2.00 2.01 2.11 2.32 2.59 -0.01
13.6 -0.05 6.64 2.80 2.28 2.21 2.25 2.33 2.53 2.83 -0.01
10.0 -0.05 8.07 3.12 2.58 2.51 2.59 2.64 2.83 -0.03 -0.01

****************************************************************
* Minimum safety factor = 1.540 *
* For circle at 18.220 42.000 radius 45.023 *
****************************************************************

GRID 3
***************

Circles through point ( 4.00 0.00 )

102
SAFETY FACTORS
**************

X 4.0 7.6 11.1 14.7 18.2 21.8 25.3 28.9 32.4 36.0

42.0 3.23 2.33 1.80 1.57 1.52 1.58 1.68 -0.01 -0.01 -0.01
38.4 3.86 2.53 1.87 1.61 1.53 1.57 1.68 -0.01 -0.01 -0.01
34.9 5.13 2.78 1.95 1.66 1.54 1.57 1.68 1.84 -0.01 -0.01
31.3 -0.05 3.12 2.06 1.72 1.58 1.59 1.70 1.87 -0.01 -0.01
27.8 -0.05 3.57 2.17 1.77 1.65 1.63 1.73 1.92 -0.01 -0.01
24.2 -0.04 4.22 2.28 1.86 1.71 1.70 1.80 1.98 2.22 -0.01
20.7 -0.04 5.20 2.46 1.94 1.81 1.80 1.89 2.09 2.35 -0.01
17.1 -0.04 7.03 2.67 2.07 1.93 1.96 2.04 2.23 2.51 -0.01
13.6 -0.04 -0.08 2.83 2.21 2.12 2.17 2.26 2.44 2.73 -0.01
10.0 -0.04 -0.08 3.13 2.47 2.42 2.50 2.58 2.74 -0.03 -0.03

****************************************************************
* Minimum safety factor = 1.523 *
* For circle at 18.220 42.000 radius 44.342 *
****************************************************************

GRID 4
***************

Circles through point ( 6.00 0.00 )

SAFETY FACTORS
**************

X 4.0 7.6 11.1 14.7 18.2 21.8 25.3 28.9 32.4 36.0

42.0 3.14 2.12 1.79 1.57 1.50 1.55 1.65 -0.01 -0.01 -0.01

103
 38.4 3.78 2.28 1.87 1.62 1.51 1.54 1.64 1.79 -0.01 -0.01
34.9 4.78 2.48 1.96 1.66 1.54 1.54 1.65 1.80 -0.01 -0.01
31.3 -0.05 2.75 2.09 1.71 1.58 1.56 1.66 1.82 -0.01 -0.01
27.8 -0.05 3.12 2.21 1.79 1.63 1.60 1.69 1.86 -0.01 -0.01
24.2 -0.05 3.68 2.35 1.86 1.69 1.67 1.74 1.92 2.17 -0.01
20.7 -0.05 4.59 2.52 1.93 1.79 1.77 1.84 2.02 2.27 -0.01
17.1 -0.05 -0.05 2.77 2.06 1.89 1.90 1.98 2.16 2.43 -0.01
13.6 -0.05 -0.05 2.99 2.19 2.09 2.11 2.21 2.37 2.66 3.01
10.0 -0.05 -0.05 3.36 2.45 2.34 2.45 2.53 2.67 2.96 -0.03

****************************************************************
* Minimum safety factor = 1.502 *
* For circle at 18.220 42.000 radius 43.742 *
****************************************************************

GRID 5
***************
Circles through point ( 8.00 0.00 )

SAFETY FACTORS
**************
X 4.0 7.6 11.1 14.7 18.2 21.8 25.3 28.9 32.4 36.0

42.0 -0.01 2.13 1.77 1.56 1.49 1.53 1.63 -0.01 -0.01 -0.01
38.4 -0.01 2.30 1.85 1.62 1.51 1.52 1.62 1.76 -0.01 -0.01
34.9 -0.01 2.51 1.97 1.67 1.53 1.53 1.62 1.76 -0.01 -0.01
31.3 -0.01 2.80 2.08 1.72 1.57 1.55 1.63 1.78 -0.01 -0.01
27.8 -0.01 3.20 2.21 1.78 1.62 1.58 1.66 1.82 2.04 -0.01
24.2 -0.01 3.70 2.38 1.85 1.70 1.66 1.70 1.87 2.10 -0.01
20.7 -0.01 -0.05 2.57 1.97 1.77 1.75 1.79 1.96 2.21 -0.01
17.1 -0.01 -0.05 2.82 2.07 1.87 1.87 1.94 2.10 2.37 2.71
13.6 -0.01 -0.05 3.25 2.19 2.02 2.08 2.17 2.31 2.59 2.95
10.0 -0.01 -0.05 3.65 2.48 2.29 2.38 2.49 2.63 2.89 3.29

104
****************************************************************
* Minimum safety factor = 1.491 *
* For circle at 18.220 42.000 radius 43.226 *
****************************************************************

GRID 6
***************
Circles through point ( 9.00 0.00 )

SAFETY FACTORS
**************
X 4.0 7.6 11.1 14.7 18.2 21.8 25.3 28.9 32.4 36.0

42.0 -0.01 2.12 1.76 1.56 1.49 1.52 1.62 -0.01 -0.01 -0.01
38.4 -0.01 2.28 1.84 1.61 1.50 1.51 1.61 1.75 -0.01 -0.01
34.9 -0.01 2.48 1.93 1.66 1.53 1.52 1.60 1.75 -0.01 -0.01
31.3 -0.01 2.76 2.04 1.73 1.58 1.54 1.61 1.77 -0.01 -0.01
27.8 -0.01 3.13 2.21 1.80 1.63 1.58 1.63 1.79 2.01 -0.01
24.2 -0.01 3.70 2.38 1.87 1.69 1.65 1.69 1.85 2.08 -0.01
20.7 -0.01 4.63 2.60 1.96 1.77 1.74 1.78 1.93 2.18 -0.01
17.1 -0.01 -0.05 2.87 2.07 1.87 1.86 1.93 2.08 2.34 2.68
13.6 -0.01 -0.05 3.24 2.20 2.01 2.05 2.15 2.31 2.56 2.93
10.0 -0.01 -0.05 -0.05 2.50 2.30 2.35 2.50 2.62 2.88 3.26

****************************************************************
* Minimum safety factor = 1.490 *
* For circle at 18.220 42.000 radius 43.000 *
****************************************************************

GRID 7
***************

Circles through point ( 55.33 20.00 )

105
SAFETY FACTORS
**************

X 4.0 7.6 11.1 14.7 18.2 21.8 25.3 28.9 32.4 36.0

42.0 -0.01 -0.01 -0.01 -0.01 1.49 1.55 1.68 1.86 2.14 2.63
38.4 -0.01 -0.01 -0.01 -0.01 1.54 1.53 1.61 1.76 1.98 2.34
34.9 -0.01 -0.01 -0.01 -0.01 -0.01 1.51 1.58 1.69 1.86 2.14
31.3 -0.01 -0.01 -0.01 -0.01 -0.01 1.57 1.58 1.66 1.78 1.99
27.8 -0.01 -0.01 -0.01 -0.01 -0.01 1.69 1.62 1.69 1.78 1.94
24.2 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 1.72 1.76 1.84 1.98
20.7 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 1.90 1.89 1.99 2.14
17.1 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 2.16 2.09 2.21 2.41
13.6 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 2.41 2.51 2.78
10.0 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 2.80 2.87 3.25

****************************************************************
* Minimum safety factor = 1.489 *
* For circle at 18.220 42.000 radius 43.141 *
****************************************************************
GRID 8
***************
Circles through point ( 58.89 20.00 )

SAFETY FACTORS
**************
X 4.0 7.6 11.1 14.7 18.2 21.8 25.3 28.9 32.4 36.0

106
 Y

42.0 -0.01 -0.01 -0.01 -0.01 -0.01 1.52 1.60 1.73 1.91 2.20
38.4 -0.01 -0.01 -0.01 -0.01 -0.01 1.54 1.58 1.68 1.83 2.06
34.9 -0.01 -0.01 -0.01 -0.01 -0.01 1.61 1.58 1.66 1.79 1.97
31.3 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 1.61 1.68 1.78 1.94
27.8 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 1.71 1.73 1.82 1.95
24.2 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 1.87 1.82 1.92 2.05
20.7 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 1.98 2.06 2.22
17.1 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 2.23 2.27 2.47
13.6 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 2.56 2.58 2.82
10.0 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 2.96 3.25

****************************************************************
* Minimum safety factor = 1.516 *
* For circle at 21.776 42.000 radius 43.145 *
****************************************************************

GRID 9
***************
Circles through point ( 62.44 20.00 )
SAFETY FACTORS
**************

X 4.0 7.6 11.1 14.7 18.2 21.8 25.3 28.9 32.4 36.0

42.0 -0.01 -0.01 -0.01 -0.01 -0.01 1.59 1.60 1.70 1.85 2.07
38.4 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 1.60 1.68 1.81 2.00
34.9 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 1.65 1.69 1.80 1.96
31.3 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 1.74 1.73 1.82 1.97
27.8 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 1.80 1.89 2.02
24.2 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 1.94 1.99 2.14
20.7 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 2.14 2.15 2.31

107
 17.1 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 2.38 2.56
13.6 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 2.69 2.90
10.0 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 -0.03 3.26

****************************************************************
* Minimum safety factor = 1.595 *
* For circle at 21.776 42.000 radius 46.234 *
****************************************************************

GRID 10
***************
Circles through point ( 66.00 20.00 )

SAFETY FACTORS
**************
X 4.0 7.6 11.1 14.7 18.2 21.8 25.3 28.9 32.4 36.0

42.0 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 1.65 1.71 1.84 2.03
38.4 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 1.71 1.72 1.83 2.00
34.9 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 1.75 1.84 1.99
31.3 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 1.82 1.89 2.03
27.8 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 1.94 1.97 2.10
24.2 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 2.11 2.08 2.23
20.7 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 2.27 2.40
17.1 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 2.53 2.63
13.6 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 -0.03 2.94
10.0 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 -0.01 -0.03

****************************************************************
* Minimum safety factor = 1.651 *
* For circle at 25.332 42.000 radius 46.237 *
****************************************************************

108
Lampiran C6. HASIL ANALISIS MODEL II (JOZLOPE)

109
Lampiran C7. HASIL ANALISIS MODEL III (SLIDE)

110
111
Lampiran C8. HASIL ANALISIS MODEL III (XSTABL)

XSTABL File: SLIDE1 7-21-08 0:32

******************************************
* X S T A B L *
* *
* Slope Stability Analysis *
* using the *
* Method of Slices *
* *
* Copyright (C) 1992 - 99 *
* Interactive Software Designs, Inc. *
* Moscow, ID 83843, U.S.A. *
* *
* All Rights Reserved *
* *
* Ver. 5.203 96 - 1999 *
******************************************

Problem Description : validasi

-----------------------------
SEGMENT BOUNDARY COORDINATES
-----------------------------

3 SURFACE boundary segments

Segment x-left y-left x-right y-right Soil Unit

No. (ft) (ft) (ft) (ft) Below Segment

1 .0 10.0 10.0 10.0 1

112
 2 10.0 10.0 40.0 30.0 1
3 40.0 30.0 60.0 30.0 1

--------------------------
ISOTROPIC Soil Parameters
--------------------------

1 Soil unit(s) specified

Soil Unit Weight Cohesion Friction Pore Pressure Water

Unit Moist Sat. Intercept Angle Parameter Constant Surface
No. (pcf) (pcf) (psf) (deg) Ru (psf) No.

1 18.8 18.8 41.7 15.00 .000 .0 0

A critical failure surface searching method, using a random

technique for generating CIRCULAR surfaces has been specified.

1000 trial surfaces will be generated and analyzed.

100 Surfaces initiate from each of 10 points equally spaced

along the ground surface between x = .0 ft
and x = 10.0 ft

Each surface terminates between x = 40.0 ft

and x = 60.0 ft

Unless further limitations were imposed, the minimum elevation

at which a surface extends is y = .0 ft

113
 * * * * * DEFAULT SEGMENT LENGTH SELECTED BY XSTABL * * * * *

3.0 ft line segments define each trial failure surface.

---------------------
ANGULAR RESTRICTIONS
---------------------

The first segment of each failure surface will be inclined

within the angular range defined by :

Lower angular limit := -45.0 degrees

Upper angular limit := (slope angle - 5.0) degrees

************************************************************************
-- WARNING -- WARNING -- WARNING -- WARNING -- (# 48)
************************************************************************
Negative effective stresses were calculated at the base of a slice.
This warning is usually reported for cases where slices have low self
weight and a relatively high "c" shear strength parameter. In such
cases, this effect can only be eliminated by reducing the "c" value.
************************************************************************

------------------------------------------------------------
USER SELECTED option for unrestricted values of strength
------------------------------------------------------------

Factors of safety have been calculated by the :

* * * * * SIMPLIFIED BISHOP METHOD * * * * *

114
 The most critical circular failure surface
is specified by 17 coordinate points

Point x-surf y-surf

No. (ft) (ft)

1 10.00 10.00
2 12.99 9.71
3 15.98 9.64
4 18.98 9.80
5 21.96 10.19
6 24.89 10.80
7 27.77 11.64
8 30.58 12.69
9 33.31 13.95
10 35.92 15.41
11 38.43 17.07
12 40.79 18.91
13 43.01 20.93
14 45.07 23.11
15 46.96 25.44
16 48.67 27.91
17 49.90 30.00

**** Simplified BISHOP FOS = 1.376 ****

The following is a summary of the TEN most critical surfaces

Problem Description : validasi

FOS Circle Center Radius Initial Terminal Resisting

(BISHOP) x-coord y-coord x-coord x-coord Moment
(ft) (ft) (ft) (ft) (ft) (ft-lb)

115
 1. 1.376 15.35 49.15 39.51 10.00 49.90 1.316E+05
2. 1.376 17.98 44.29 35.48 8.89 50.43 1.318E+05
3. 1.379 19.92 39.11 30.75 10.00 49.26 1.153E+05
4. 1.382 18.83 36.55 27.98 10.00 45.99 9.377E+04
5. 1.383 16.29 41.84 32.69 8.89 46.72 1.055E+05
6. 1.384 20.37 39.64 31.40 10.00 50.23 1.221E+05
7. 1.385 17.00 41.10 32.44 7.78 47.45 1.128E+05
8. 1.385 16.41 44.40 35.47 7.78 48.79 1.247E+05
9. 1.386 16.81 39.67 30.71 8.89 45.92 9.875E+04
10. 1.386 20.46 39.53 31.32 10.00 50.27 1.223E+05

* * * END OF FILE * * *

116
Lampiran C9. HASIL ANALISIS MODEL III (JOZLOPE)

117