DESIGN REPORT

(2x20 Solar Structure)

For

SUN SOURCE

Ganges Internationale Private Limited

B-36, Lawrence Road Industrial Area, Britannia Rd, New Delhi, DL 110035
011 4587 0565

1
Design Input

1 DesignSpecifications

Basic Wind Speed : 170 Kmph

Terrain Category : 1
Mean Probable Design Life : 25 Yr
Class : B
Topography factor, k3 : 1.0

2 Detail of Solar panel

Panel Make : Renesola Virtus II WS -300

Panel Size : 1956 x 992 x 50mm
Weight : 29 kg
No. of Module : 20 (2 Rows x 10 Columns)
Orientation : Portrait
Tilt : 30 Deg.

3 Design Standard

Wind load calculation : IS 875 Part 3-1987

Design of Members : IS 801-1975 & IS 800

4 Material Properties

Hot rolled structural Steel : Fy-250Mpa

Cold formed Steel : Fy-350/410Mpa
Sag Rods : Fe 415
Structural Bolts : Grade 8.8

5 Foundation Detail

Foundation Type :Pile Foundation

Pile Diameter :350mm
Pile Length :1600mm (below ground)
Foundation above ground level :100mm
Concrete Grade : M25

2
Load Calculations

1 Wind Load

Wind load on body calculated as per Cl. 6.3 of IS 875-Part 3

F = Cf x Ae x Pd

Where,
F= Force acting on member
Cf= Force coefficient
Ae= Effective area
Pd= Design wind pressure

2 Design Specifications

Basic wind speed : 47 m/s

Risk coefficient (K1) : 0.9
K2 factor : 1.03
Topography factor : 1.0

Design Wind Pressure = 0.6 x (Vb x K1x K2 x K3) 2

= 1.139 kN/m2

Wind Load on Purlin

Force Coefficient
Cp = 1.2
Ci = -1.8

+ve pressure =1.139x 1.2 x 1.956

2
= 1.337 kN/m (UDL)

-ve pressure = 1.139x 1.8 x 1.956

2
= 2.005 kN/m (UDL)

Self weight of module

Wight of solar module per meter run = 29/2 kg

= 14.5 kN/m

3
Staad Model

3D Model

+ve wind Pressure -ve wind pressure

Staad Design Output

4
PAGE NO. 1

****************************************************
* *
* STAAD.Pro *
* Version 2007 Build 04 *
* Proprietary Program of *
* Research Engineers, Intl. *
* Date= NOV 7, 2014 *
* Time= 11:34:13 *
* *
* USER ID: *
****************************************************

1. STAAD SPACE
INPUT FILE: 2X20_Renesola - FINAL.STD
2. START JOB INFORMATION
3. ENGINEER DATE 03-NOV-14
4. END JOB INFORMATION
5. INPUT WIDTH 79
6. UNIT METER KN
7. JOINT COORDINATES
8. 1 0 0.72 0; 2 0 2.296 -2.73; 6 0 1.79604 -1.86395; 7 0 0 -1.864
9. 8 0 1.19496 -0.822746; 9 0 0.1 -1.86399; 10 0 1.30795 -1.01847
10. 11 0 1.70805 -1.71153; 12 2.62286 0.72 0; 13 2.62286 1.19496 -0.822746
11. 14 2.62286 1.79604 -1.86395; 15 2.62286 2.296 -2.73; 16 2.62286 0 -1.864
12. 17 2.62286 0.1 -1.86399; 18 2.62286 1.30795 -1.01847
13. 19 2.62286 1.70805 -1.71153; 20 1.31143 0.72 0; 21 1.31143 1.30795 -1.01847
14. 22 1.31143 1.70805 -1.71153; 23 1.31143 2.296 -2.73; 24 5.24572 0.72 0
15. 25 5.24572 1.19496 -0.822746; 26 5.24572 1.79604 -1.86395
16. 27 5.24572 2.296 -2.73; 28 5.24572 0 -1.864; 29 5.24572 0.1 -1.86399
17. 30 5.24572 1.30795 -1.01847; 31 5.24572 1.70805 -1.71153; 32 3.93429 0.72 0
18. 33 3.93429 1.30795 -1.01847; 34 3.93429 1.70805 -1.71153
19. 35 3.93429 2.296 -2.73; 36 7.86858 0.72 0; 37 7.86858 1.19496 -0.822746
20. 38 7.86858 1.79604 -1.86395; 39 7.86858 2.296 -2.73; 40 7.86858 0 -1.864
21. 41 7.86858 0.1 -1.86399; 42 7.86858 1.30795 -1.01847
22. 43 7.86858 1.70805 -1.71153; 44 6.55715 0.72 0; 45 6.55715 1.30795 -1.01847
23. 46 6.55715 1.70805 -1.71153; 47 6.55715 2.296 -2.73; 48 10.4914 0.72 0
24. 49 10.4914 1.19496 -0.822746; 50 10.4914 1.79604 -1.86395
25. 51 10.4914 2.296 -2.73; 52 10.4914 0 -1.864; 53 10.4914 0.1 -1.86399
26. 54 10.4914 1.30795 -1.01847; 55 10.4914 1.70805 -1.71153; 56 9.18001 0.72 0
27. 57 9.18001 1.30795 -1.01847; 58 9.18001 1.70805 -1.71153
28. 59 9.18001 2.296 -2.73; 60 13.1143 0.72 0; 61 13.1143 1.19496 -0.822746
29. 62 13.1143 1.79604 -1.86395; 63 13.1143 2.296 -2.73; 64 13.1143 0 -1.864
30. 65 13.1143 0.1 -1.86399; 66 13.1143 1.30795 -1.01847
31. 67 13.1143 1.70805 -1.71153; 68 14.4257 0.72 0; 69 14.4257 1.30795 -1.01847
32. 70 14.4257 1.70805 -1.71153; 71 14.4257 2.296 -2.73; 72 18.36 0.72 0
33. 73 18.36 1.19496 -0.822746; 75 18.36 2.296 -2.73; 78 18.36 1.30795 -1.01847
34. 79 18.36 1.70805 -1.71153; 80 17.0486 0.72 0; 81 17.0486 1.30795 -1.01847
35. 82 17.0486 1.70805 -1.71153; 83 17.0486 2.296 -2.73; 84 19.31 0.72 0
36. 85 19.31 2.296 -2.73; 86 19.31 1.30795 -1.01847; 87 19.31 1.70805 -1.71153
37. 88 -0.95 0.72 0; 89 -0.95 2.296 -2.73; 90 -0.95 1.30795 -1.01847
38. 91 -0.95 1.70805 -1.71153; 92 15.7372 0.72 0; 93 15.7372 1.19496 -0.822746
39. 94 15.7372 1.79604 -1.86395; 95 15.7372 2.296 -2.73; 96 15.7372 0 -1.864
40. 97 15.7372 0.1 -1.86399; 98 15.7372 1.30795 -1.01847
STAAD SPACE -- PAGE NO. 2

41. 99 15.7372 1.70805 -1.71153; 100 11.8029 0.72 0; 101 11.8029 1.30795 -1.01847
42. 102 11.8029 1.70805 -1.71153; 103 11.8029 2.296 -2.73; 107 18.36 0 -1.864
43. 108 18.36 0.1 -1.86399; 109 18.36 1.79604 -1.86395
44. MEMBER INCIDENCES
45. 1 1 8; 5 6 2; 6 7 9; 7 8 10; 9 9 8; 10 10 11; 11 11 6; 12 12 13; 13 14 15
46. 14 16 17; 15 13 18; 17 17 13; 18 18 19; 19 19 14; 20 1 20; 21 10 21; 22 11 22
47. 23 2 23; 24 20 12; 25 21 18; 26 22 19; 27 23 15; 28 20 21; 29 22 23; 30 24 25
48. 31 26 27; 32 28 29; 33 25 30; 35 29 25; 36 30 31; 37 31 26; 38 12 32; 39 18 33

5
 49. 40 19 34; 41 15 35; 42 32 24; 43 33 30; 44 34 31; 45 35 27; 46 32 33; 47 34 35
50. 48 36 37; 49 38 39; 50 40 41; 51 37 42; 53 41 37; 54 42 43; 55 43 38; 56 24 44
51. 57 30 45; 58 31 46; 59 27 47; 60 44 36; 61 45 42; 62 46 43; 63 47 39; 64 44 45
52. 65 46 47; 66 48 49; 67 50 51; 68 52 53; 69 49 54; 71 53 49; 72 54 55; 73 55 50
53. 74 36 56; 75 42 57; 76 43 58; 77 39 59; 78 56 48; 79 57 54; 80 58 55; 81 59 51
54. 82 56 57; 83 58 59; 84 60 61; 85 62 63; 86 64 65; 87 61 66; 89 65 61; 90 66 67
55. 91 67 62; 92 48 100; 93 54 101; 94 55 102; 95 51 103; 100 68 69; 101 70 71
56. 102 72 73; 105 73 78; 108 78 79; 114 80 72; 115 81 78; 116 82 79; 117 83 75
57. 118 80 81; 119 82 83; 124 72 84; 125 78 86; 126 79 87; 127 75 85; 128 88 1
58. 129 90 10; 130 91 11; 131 89 2; 138 9 6; 139 17 14; 140 29 26; 141 41 38
59. 142 53 50; 143 65 62; 160 92 80; 161 92 93; 162 95 83; 163 94 95; 164 96 97
60. 165 98 81; 166 93 98; 167 97 93; 168 99 82; 169 98 99; 170 99 94; 171 97 94
61. 176 68 92; 177 69 98; 178 70 99; 179 71 95; 180 100 60; 181 101 66
62. 182 100 101; 183 102 67; 184 103 63; 185 102 103; 186 60 68; 187 66 69
63. 188 67 70; 189 63 71; 194 107 108; 195 108 73; 196 109 79; 197 108 109
64. 198 109 75
65. DEFINE MATERIAL START
66. ISOTROPIC STEEL
67. E 2.05E+008
68. POISSON 0.3
69. DENSITY 76.8195
70. ALPHA 1.2E-005
71. DAMP 0.03
72. END DEFINE MATERIAL
73. CONSTANTS
74. BETA 30 MEMB 20 TO 27 38 TO 45 56 TO 63 74 TO 81 92 TO 95 114 TO 117 -
75. 124 TO 131 160 162 165 168 176 TO 181 183 184 186 TO 189
76. BETA 90 MEMB 6 14 32 50 68 86 138 TO 143 164 171 194 197
77. MATERIAL STEEL ALL
78. MEMBER PROPERTY COLDFORMED INDIAN
79. 20 TO 27 38 TO 45 56 TO 63 74 TO 81 92 TO 95 114 TO 117 124 TO 131 160 162 -
80. 165 168 176 TO 181 183 184 186 TO 189 TABLE ST 70CS40X1.4
81. 1 5 7 10 TO 13 15 18 19 30 31 33 36 37 48 49 51 54 55 66 67 69 72 73 84 85 -
82. 87 90 91 102 105 108 161 163 166 169 170 196 198 TABLE ST 120CS50X2
83. 9 17 35 53 71 89 167 195 TABLE ST 50CS30X2.5
84. 28 29 46 47 64 65 82 83 100 101 118 119 182 185 PRIS YD 0.012
85. 6 14 32 50 68 86 138 TO 143 164 171 194 197 TABLE ST 150CS50X2.5
86. SUPPORTS
87. 7 16 28 40 52 64 96 107 FIXED
88. MEMBER TRUSS
89. 9 17 28 29 35 46 47 53 64 65 71 82 83 89 100 101 118 119 167 182 185 195
90. MEMBER RELEASE
91. 138 TO 143 171 197 END MY MZ
92. ********************************************
93. ******** DEAD LOAD **********************
94. ********************************************
95. LOAD 1 DL
96. SELFWEIGHT Y -1
STAAD SPACE -- PAGE NO. 3

97. MEMBER LOAD

98. 20 TO 27 38 TO 45 56 TO 63 74 TO 81 92 TO 95 114 TO 117 124 TO 131 160 162 -
99. 165 168 176 TO 181 183 184 186 TO 189 UNI GY -0.142
100. ***********************
101. LOAD 2 +VE WIND LOAD
102. MEMBER LOAD
103. 20 TO 27 38 TO 45 56 TO 63 74 TO 81 92 TO 95 114 TO 117 124 TO 131 160 162 -
104. 165 168 176 TO 181 183 184 186 TO 189 UNI Y -1.337
105. ***********************
106. LOAD 3 -VE WIND LOAD
107. MEMBER LOAD
108. 20 TO 27 38 TO 45 56 TO 63 74 TO 81 92 TO 95 114 TO 117 124 TO 131 160 162 -
109. 165 168 176 TO 181 183 184 186 TO 189 UNI Y 2.005
110. ************************************
111. ************ LOAD COMBINATION *****
112. ************************************
113. LOAD COMB 4 DL+ (+VE WIND LOAD)
114. 1 1.0 2 1.0
115. LOAD COMB 5 DL+ (-VE WIND LOAD)
116. 1 1.0 3 1.0
117. LOAD COMB 6 DL+ (+VE WIND LOAD)

6
 118. 1 0.75 2 0.75
119. LOAD COMB 7 DL+ (-VE WIND LOAD)
120. 1 0.75 3 0.75
121. LOAD COMB 8 DL
122. 1 1.0
123. PERFORM ANALYSIS PRINT STATICS CHECK

P R O B L E M S T A T I S T I C S
-----------------------------------

NUMBER OF JOINTS/MEMBER+ELEMENTS/SUPPORTS = 100/ 142/ 8

SOLVER USED IS THE IN-CORE ADVANCED SOLVER

TOTAL PRIMARY LOAD CASES = 3, TOTAL DEGREES OF FREEDOM = 552

STATIC LOAD/REACTION/EQUILIBRIUM SUMMARY FOR CASE NO. 1

DL

CENTER OF FORCE BASED ON Y FORCES ONLY (METE).

(FORCES IN NON-GLOBAL DIRECTIONS WILL INVALIDATE RESULTS)

X = 0.918000087E+01
Y = 0.146028678E+01
Z = -0.139040627E+01

CENTER OF FORCE BASED ON Z FORCES ONLY (METE).

(FORCES IN NON-GLOBAL DIRECTIONS WILL INVALIDATE RESULTS)

X = 0.919525117E+01
Y = 0.770163482E+00
Z = -0.186411506E+01
TOTAL APPLIED LOAD 1

***TOTAL APPLIED LOAD ( KN METE ) SUMMARY (LOADING 1 )

SUMMATION FORCE-X = 0.00
SUMMATION FORCE-Y = -15.01
SUMMATION FORCE-Z = 0.00

SUMMATION OF MOMENTS AROUND THE ORIGIN-

MX= -20.87 MY= 0.00 MZ= -137.80

TOTAL REACTION LOAD 1

***TOTAL REACTION LOAD( KN METE ) SUMMARY (LOADING 1 )

SUMMATION FORCE-X = 0.00
SUMMATION FORCE-Y = 15.01
SUMMATION FORCE-Z = 0.00

SUMMATION OF MOMENTS AROUND THE ORIGIN-

MX= 20.87 MY= 0.00 MZ= 137.80

MAXIMUM DISPLACEMENTS ( CM /RADIANS) (LOADING 1)

MAXIMUMS AT NODE
X = 3.15814E-04 84
Y = -4.58379E-01 100
Z = 2.84351E-01 70
RX= 2.97500E-03 12
RY= 9.41096E-04 88
RZ= -7.43618E-04 87

STATIC LOAD/REACTION/EQUILIBRIUM SUMMARY FOR CASE NO. 2

7
 +VE WIND LOAD

STAAD SPACE -- PAGE NO. 5

CENTER OF FORCE BASED ON Y FORCES ONLY (METE).

(FORCES IN NON-GLOBAL DIRECTIONS WILL INVALIDATE RESULTS)

X = 0.917999977E+01
Y = 0.150799998E+01
Z = -0.136500000E+01

CENTER OF FORCE BASED ON Z FORCES ONLY (METE).

(FORCES IN NON-GLOBAL DIRECTIONS WILL INVALIDATE RESULTS)

X = 0.917999977E+01
Y = 0.150799998E+01
Z = -0.136500000E+01
TOTAL APPLIED LOAD 2

***TOTAL APPLIED LOAD ( KN METE ) SUMMARY (LOADING 2 )

SUMMATION FORCE-X = 0.00
SUMMATION FORCE-Y = -93.83
SUMMATION FORCE-Z = -54.18

SUMMATION OF MOMENTS AROUND THE ORIGIN-

MX= -209.78 MY= 497.33 MZ= -861.40

TOTAL REACTION LOAD 2

***TOTAL REACTION LOAD( KN METE ) SUMMARY (LOADING 2 )

SUMMATION FORCE-X = 0.00
SUMMATION FORCE-Y = 93.83
SUMMATION FORCE-Z = 54.18

SUMMATION OF MOMENTS AROUND THE ORIGIN-

MX= 209.78 MY= -497.33 MZ= 861.40

MAXIMUM DISPLACEMENTS ( CM /RADIANS) (LOADING 2)

MAXIMUMS AT NODE
X = -3.90053E-04 84
Y = -2.11199E+00 23
Z = -2.14184E+00 71
RX= -2.20004E-02 15
RY= 2.71575E-03 2
RZ= -4.55203E-03 2

STATIC LOAD/REACTION/EQUILIBRIUM SUMMARY FOR CASE NO. 3

-VE WIND LOAD

CENTER OF FORCE BASED ON Y FORCES ONLY (METE).

(FORCES IN NON-GLOBAL DIRECTIONS WILL INVALIDATE RESULTS)

X = 0.917999978E+01
Y = 0.150799998E+01
Z = -0.136500000E+01
STAAD SPACE -- PAGE NO. 6

CENTER OF FORCE BASED ON Z FORCES ONLY (METE).

(FORCES IN NON-GLOBAL DIRECTIONS WILL INVALIDATE RESULTS)

X = 0.917999978E+01
Y = 0.150799998E+01
Z = -0.136500000E+01
TOTAL APPLIED LOAD 3

***TOTAL APPLIED LOAD ( KN METE ) SUMMARY (LOADING 3 )

8
 SUMMATION FORCE-X = 0.00
SUMMATION FORCE-Y = 140.72
SUMMATION FORCE-Z = 81.24

SUMMATION OF MOMENTS AROUND THE ORIGIN-

MX= 314.59 MY= -745.81 MZ= 1291.78

TOTAL REACTION LOAD 3

***TOTAL REACTION LOAD( KN METE ) SUMMARY (LOADING 3 )

SUMMATION FORCE-X = 0.00
SUMMATION FORCE-Y = -140.72
SUMMATION FORCE-Z = -81.24

SUMMATION OF MOMENTS AROUND THE ORIGIN-

MX= -314.59 MY= 745.81 MZ= -1291.78

MAXIMUM DISPLACEMENTS ( CM /RADIANS) (LOADING 3)

MAXIMUMS AT NODE
X = 5.84934E-04 84
Y = 3.16720E+00 23
Z = 3.21196E+00 71
RX= 3.29924E-02 15
RY= -4.07261E-03 2
RZ= 6.82634E-03 2

************ END OF DATA FROM INTERNAL STORAGE ************

124. **********************************
125. LOAD LIST 6 TO 8
126. PARAMETER 1
127. CODE IS801
128. FYLD 350000 MEMB 20 TO 27 38 TO 45 56 TO 63 74 TO 81 92 TO 95 114 TO 117 124 -
129. 125 TO 131 160 162 165 168 176 TO 181 183 184 186 TO 189
130. FYLD 410000 MEMB 1 5 TO 7 9 TO 15 17 TO 19 30 TO 33 35 TO 37 48 TO 51 -
131. 53 TO 55 66 TO 69 71 TO 73 84 TO 87 89 TO 91 102 105 108 138 TO 143 161 163 -
132. 164 166 167 169 TO 171 194 195 197 198
133. KY 2 MEMB 124 TO 131
134. KZ 2 MEMB 1 5 12 13 20 TO 27 30 31 38 TO 45 48 49 56 TO 63 66 67 74 TO 81 -
135. 84 85 92 TO 95 102 114 TO 117 124 TO 131 160 TO 163 165 168 176 TO 181 183 -
136. 184 186 TO 189 198
137. KZ 5.22 MEMB 7 15 33 51 69 87 105 166
138. KZ 1.5 MEMB 10 18 36 54 72 90 108 169
139. KZ 6.67 MEMB 11 19 37 55 73 91 170 196
140. KY 6.56 MEMB 11 19 37 55 73 91 170 196
141. KY 1.18 MEMB 5 13 31 49 67 85 163 198
STAAD SPACE -- PAGE NO. 7

142. KY 1.42 MEMB 1 12 30 48 66 84 102 161

143. KY 5.13 MEMB 7 15 33 51 69 87 105 166
144. KY 2.12 MEMB 138 TO 143 171 197
145. KY 36 MEMB 6 14 32 50 68 86 164 194
146. TRACK 2 MEMB 1 5 TO 7 9 TO 15 17 TO 27 30 TO 33 35 TO 45 48 TO 51 53 TO 63 -
147. 66 TO 69 71 TO 81 84 TO 87 89 TO 95 102 105 108 114 TO 117 124 TO 131 138 -
148. 139 TO 143 160 TO 171 176 TO 181 183 184 186 TO 189 194 TO 198
149. CHECK CODE MEMB 1 5 TO 7 9 TO 15 17 TO 27 30 TO 33 35 TO 45 48 TO 51 -
150. 53 TO 63 66 TO 69 71 TO 81 84 TO 87 89 TO 95 102 105 108 114 TO 117 -
151. 124 TO 131 138 TO 143 160 TO 171 176 TO 181 183 184 186 TO 189 194 TO 198
STEEL DESIGN
STAAD SPACE -- PAGE NO. 8

STAAD.Pro CODE CHECKING - (I801)

***********************

9
|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 1 SECTION: 120CS50X2 LEN: 950.00 GOV.LOC: 950.00 |
| STATUS: PASS RATIO = 0.688 GOV.MODE: Bend Z + Shear GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 115.69 COMPRESS: 0.00 |
| BEND. Z: 4.29 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.5703E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 9.9301E+00 SYE_C: 4.5934E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.42 KZ: 2.00 LX: 95.00 LY: 95.00 LZ: 95.00 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 5 SECTION: 120CS50X2 LEN: 1000.00 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.759 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 5.49 |
| BEND. Z: 4.07 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.5703E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 9.9301E+00 SYE_C: 4.5934E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.18 KZ: 2.00 LX: 100.00 LY: 100.00 LZ: 100.00 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

STAAD SPACE -- PAGE NO. 9

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 6 SECTION: 150CS50X2.5 LEN: 100.00 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.692 GOV.MODE: Bend Z + Shear GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 173.07 COMPRESS: 0.00 |
| BEND. Z: 7.28 BEND. Y: 0.00 SHEAR Z: 30.75 SHEAR Y: 50.53 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 7.04 AE: 7.04 |
| IZ: 2.3017E+02 IZE: 2.2565E+02 IY: 2.5661E+01 IYE: 2.5661E+01 |
| SZE_T: 3.0579E+01 SZE_C: 2.9611E+01 SYE_T: 1.5495E+01 SYE_C: 7.6738E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 36.00 KZ: 1.00 LX: 10.00 LY: 10.00 LZ: 10.00 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

10
|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 7 SECTION: 120CS50X2 LEN: 226.00 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.806 GOV.MODE: Bend + Compress GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 5.52 |
| BEND. Z: 4.29 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.5703E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 9.9301E+00 SYE_C: 4.5934E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 5.13 KZ: 5.22 LX: 22.60 LY: 22.60 LZ: 22.60 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 10

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 9 SECTION: 50CS30X2.5 LEN: 1511.00 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.804 GOV.MODE: Compression GOV.LOAD: 6 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 6.05 |
| BEND. Z: 0.00 BEND. Y: 0.00 SHEAR Z: 0.00 SHEAR Y: 0.00 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 3.04 AE: 3.04 |
| IZ: 1.0765E+01 IZE: 1.0765E+01 IY: 3.8045E+00 IYE: 3.8045E+00 |
| SZE_T: 4.3058E+00 SZE_C: 4.3058E+00 SYE_T: 2.2036E+00 SYE_C: 2.9874E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 1.00 LX: 151.10 LY: 151.10 LZ: 151.10 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 10 SECTION: 120CS50X2 LEN: 800.26 GOV.LOC: 800.26 |
| STATUS: PASS RATIO = 0.693 GOV.MODE: Bend + Compress GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 5.51 |
| BEND. Z: 4.29 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.5703E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 9.9301E+00 SYE_C: 4.5934E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 1.50 LX: 80.03 LY: 80.03 LZ: 80.03 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

11
|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 11

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 11 SECTION: 120CS50X2 LEN: 175.99 GOV.LOC: 175.99 |
| STATUS: PASS RATIO = 0.783 GOV.MODE: Bend + Compress GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 5.52 |
| BEND. Z: 4.29 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.4707E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 4.4895E+00 SYE_C: 8.5297E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 6.56 KZ: 6.67 LX: 17.60 LY: 17.60 LZ: 17.60 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 12 SECTION: 120CS50X2 LEN: 950.00 GOV.LOC: 950.00 |
| STATUS: PASS RATIO = 0.839 GOV.MODE: Bend Z + Shear GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 115.69 COMPRESS: 0.00 |
| BEND. Z: 4.29 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.5703E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 9.9301E+00 SYE_C: 4.5934E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.42 KZ: 2.00 LX: 95.00 LY: 95.00 LZ: 95.00 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 12

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 13 SECTION: 120CS50X2 LEN: 1000.00 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.916 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 5.49 |
| BEND. Z: 4.07 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.5703E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 9.9301E+00 SYE_C: 4.5934E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.18 KZ: 2.00 LX: 100.00 LY: 100.00 LZ: 100.00 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

12
|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 14 SECTION: 150CS50X2.5 LEN: 100.00 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.811 GOV.MODE: Bend Z + Shear GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 173.07 COMPRESS: 0.00 |
| BEND. Z: 7.28 BEND. Y: 0.00 SHEAR Z: 30.75 SHEAR Y: 50.53 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 7.04 AE: 7.04 |
| IZ: 2.3017E+02 IZE: 2.2565E+02 IY: 2.5661E+01 IYE: 2.5661E+01 |
| SZE_T: 3.0579E+01 SZE_C: 2.9611E+01 SYE_T: 1.5495E+01 SYE_C: 7.6738E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 36.00 KZ: 1.00 LX: 10.00 LY: 10.00 LZ: 10.00 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 13

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 15 SECTION: 120CS50X2 LEN: 226.00 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.990 GOV.MODE: Bend + Compress GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 5.52 |
| BEND. Z: 4.29 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.5703E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 9.9301E+00 SYE_C: 4.5934E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 5.13 KZ: 5.22 LX: 22.60 LY: 22.60 LZ: 22.60 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 17 SECTION: 50CS30X2.5 LEN: 1511.00 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.983 GOV.MODE: Compression GOV.LOAD: 6 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 6.05 |
| BEND. Z: 0.00 BEND. Y: 0.00 SHEAR Z: 0.00 SHEAR Y: 0.00 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 3.04 AE: 3.04 |
| IZ: 1.0765E+01 IZE: 1.0765E+01 IY: 3.8045E+00 IYE: 3.8045E+00 |
| SZE_T: 4.3058E+00 SZE_C: 4.3058E+00 SYE_T: 2.2036E+00 SYE_C: 2.9874E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 1.00 LX: 151.10 LY: 151.10 LZ: 151.10 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

13
|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 14

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 18 SECTION: 120CS50X2 LEN: 800.26 GOV.LOC: 800.26 |
| STATUS: PASS RATIO = 0.852 GOV.MODE: Bend + Compress GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 5.51 |
| BEND. Z: 4.29 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.5703E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 9.9301E+00 SYE_C: 4.5934E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 1.50 LX: 80.03 LY: 80.03 LZ: 80.03 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 19 SECTION: 120CS50X2 LEN: 175.99 GOV.LOC: 175.99 |
| STATUS: PASS RATIO = 0.965 GOV.MODE: Bend + Compress GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 5.52 |
| BEND. Z: 4.29 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.4707E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 4.4895E+00 SYE_C: 8.5297E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 6.56 KZ: 6.67 LX: 17.60 LY: 17.60 LZ: 17.60 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 15

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 20 SECTION: 70CS40X1.4 LEN: 1311.43 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.652 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 46.92 COMPRESS: 0.00 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.7422E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 1.8367E+00 SYE_C: 3.3440E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |

14
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 21 SECTION: 70CS40X1.4 LEN: 1311.43 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.652 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 1.85 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.7422E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 1.8367E+00 SYE_C: 3.3440E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 16

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 22 SECTION: 70CS40X1.4 LEN: 1311.43 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.652 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 46.92 COMPRESS: 0.00 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.7422E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 1.8367E+00 SYE_C: 3.3440E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 23 SECTION: 70CS40X1.4 LEN: 1311.43 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.652 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 1.85 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.7422E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 1.8367E+00 SYE_C: 3.3440E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |

15
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 17

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 24 SECTION: 70CS40X1.4 LEN: 1311.43 GOV.LOC: 1311.43 |
| STATUS: PASS RATIO = 0.860 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 46.92 COMPRESS: 0.00 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.8098E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 3.4470E+00 SYE_C: 1.8466E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 25 SECTION: 70CS40X1.4 LEN: 1311.43 GOV.LOC: 1311.43 |
| STATUS: PASS RATIO = 0.877 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 1.85 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.8098E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 3.4470E+00 SYE_C: 1.8466E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 18

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 26 SECTION: 70CS40X1.4 LEN: 1311.43 GOV.LOC: 1311.43 |
| STATUS: PASS RATIO = 0.869 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 46.92 COMPRESS: 0.00 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.8098E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 3.4470E+00 SYE_C: 1.8466E+00 |
| |
| INPUT PARAMETERS : |
| |

16
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 27 SECTION: 70CS40X1.4 LEN: 1311.43 GOV.LOC: 1311.43 |
| STATUS: PASS RATIO = 0.832 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 1.85 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.8098E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 3.4470E+00 SYE_C: 1.8466E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 19

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 30 SECTION: 120CS50X2 LEN: 950.00 GOV.LOC: 950.00 |
| STATUS: PASS RATIO = 0.837 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 115.69 COMPRESS: 0.00 |
| BEND. Z: 4.13 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.5703E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 9.9301E+00 SYE_C: 4.5934E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.42 KZ: 2.00 LX: 95.00 LY: 95.00 LZ: 95.00 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 31 SECTION: 120CS50X2 LEN: 1000.00 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.860 GOV.MODE: Bend Z + Shear GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 5.49 |
| BEND. Z: 4.29 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.5703E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 9.9301E+00 SYE_C: 4.5934E+00 |
| |
| INPUT PARAMETERS : |
| |

17
| KX: 1.00 KY: 1.18 KZ: 2.00 LX: 100.00 LY: 100.00 LZ: 100.00 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 20

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 32 SECTION: 150CS50X2.5 LEN: 100.00 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.807 GOV.MODE: Bend Z + Shear GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 173.07 COMPRESS: 0.00 |
| BEND. Z: 7.28 BEND. Y: 0.00 SHEAR Z: 30.75 SHEAR Y: 50.53 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 7.04 AE: 7.04 |
| IZ: 2.3017E+02 IZE: 2.2565E+02 IY: 2.5661E+01 IYE: 2.5661E+01 |
| SZE_T: 3.0579E+01 SZE_C: 2.9611E+01 SYE_T: 1.5495E+01 SYE_C: 7.6738E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 36.00 KZ: 1.00 LX: 10.00 LY: 10.00 LZ: 10.00 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 33 SECTION: 120CS50X2 LEN: 226.00 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.957 GOV.MODE: Bend + Compress GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 5.52 |
| BEND. Z: 4.29 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.5703E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 9.9301E+00 SYE_C: 4.5934E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 5.13 KZ: 5.22 LX: 22.60 LY: 22.60 LZ: 22.60 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 21

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 35 SECTION: 50CS30X2.5 LEN: 1511.00 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.949 GOV.MODE: Compression GOV.LOAD: 6 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 6.05 |
| BEND. Z: 0.00 BEND. Y: 0.00 SHEAR Z: 0.00 SHEAR Y: 0.00 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 3.04 AE: 3.04 |
| IZ: 1.0765E+01 IZE: 1.0765E+01 IY: 3.8045E+00 IYE: 3.8045E+00 |
| SZE_T: 4.3058E+00 SZE_C: 4.3058E+00 SYE_T: 2.2036E+00 SYE_C: 2.9874E+00 |
| |

18
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 1.00 LX: 151.10 LY: 151.10 LZ: 151.10 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 36 SECTION: 120CS50X2 LEN: 800.26 GOV.LOC: 800.26 |
| STATUS: PASS RATIO = 0.827 GOV.MODE: Bend + Compress GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 5.51 |
| BEND. Z: 4.29 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.5703E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 9.9301E+00 SYE_C: 4.5934E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 1.50 LX: 80.03 LY: 80.03 LZ: 80.03 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 22

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 37 SECTION: 120CS50X2 LEN: 175.99 GOV.LOC: 175.99 |
| STATUS: PASS RATIO = 0.935 GOV.MODE: Bend + Compress GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 5.52 |
| BEND. Z: 4.29 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.4707E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 4.4895E+00 SYE_C: 8.5297E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 6.56 KZ: 6.67 LX: 17.60 LY: 17.60 LZ: 17.60 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 38 SECTION: 70CS40X1.4 LEN: 1311.43 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.860 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 46.92 COMPRESS: 0.00 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.7422E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 1.8367E+00 SYE_C: 3.3440E+00 |
| |

19
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 23

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 39 SECTION: 70CS40X1.4 LEN: 1311.43 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.877 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 1.85 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.7422E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 1.8367E+00 SYE_C: 3.3440E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 40 SECTION: 70CS40X1.4 LEN: 1311.43 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.869 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 46.92 COMPRESS: 0.00 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.7422E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 1.8367E+00 SYE_C: 3.3440E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 24

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 41 SECTION: 70CS40X1.4 LEN: 1311.43 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.832 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 1.85 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.7422E+00 |

20
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 1.8367E+00 SYE_C: 3.3440E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 42 SECTION: 70CS40X1.4 LEN: 1311.43 GOV.LOC: 1311.43 |
| STATUS: PASS RATIO = 0.822 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 46.92 COMPRESS: 0.00 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.8098E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 3.4470E+00 SYE_C: 1.8466E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 25

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 43 SECTION: 70CS40X1.4 LEN: 1311.43 GOV.LOC: 1311.43 |
| STATUS: PASS RATIO = 0.814 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 1.85 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.8098E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 3.4470E+00 SYE_C: 1.8466E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 44 SECTION: 70CS40X1.4 LEN: 1311.43 GOV.LOC: 1311.43 |
| STATUS: PASS RATIO = 0.816 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 46.92 COMPRESS: 0.00 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.8098E+00 |

21
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 3.4470E+00 SYE_C: 1.8466E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 26

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 45 SECTION: 70CS40X1.4 LEN: 1311.43 GOV.LOC: 1311.43 |
| STATUS: PASS RATIO = 0.828 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 1.85 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.8098E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 3.4470E+00 SYE_C: 1.8466E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 48 SECTION: 120CS50X2 LEN: 950.00 GOV.LOC: 950.00 |
| STATUS: PASS RATIO = 0.841 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 115.69 COMPRESS: 0.00 |
| BEND. Z: 4.13 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.4707E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 4.4895E+00 SYE_C: 8.5297E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.42 KZ: 2.00 LX: 95.00 LY: 95.00 LZ: 95.00 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 27

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 49 SECTION: 120CS50X2 LEN: 1000.00 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.860 GOV.MODE: Bend Z + Shear GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 5.49 |
| BEND. Z: 4.29 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |

22
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.4707E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 4.4895E+00 SYE_C: 8.5297E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.18 KZ: 2.00 LX: 100.00 LY: 100.00 LZ: 100.00 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 50 SECTION: 150CS50X2.5 LEN: 100.00 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.807 GOV.MODE: Bend Z + Shear GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 173.07 COMPRESS: 0.00 |
| BEND. Z: 7.28 BEND. Y: 0.00 SHEAR Z: 30.75 SHEAR Y: 50.53 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 7.04 AE: 7.04 |
| IZ: 2.3017E+02 IZE: 2.2565E+02 IY: 2.5661E+01 IYE: 2.5661E+01 |
| SZE_T: 3.0579E+01 SZE_C: 2.9611E+01 SYE_T: 1.5495E+01 SYE_C: 7.6738E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 36.00 KZ: 1.00 LX: 10.00 LY: 10.00 LZ: 10.00 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 28

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 51 SECTION: 120CS50X2 LEN: 226.00 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.963 GOV.MODE: Bend + Compress GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 5.52 |
| BEND. Z: 4.29 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.4707E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 4.4895E+00 SYE_C: 8.5297E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 5.13 KZ: 5.22 LX: 22.60 LY: 22.60 LZ: 22.60 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 53 SECTION: 50CS30X2.5 LEN: 1511.00 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.957 GOV.MODE: Compression GOV.LOAD: 6 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 6.05 |
| BEND. Z: 0.00 BEND. Y: 0.00 SHEAR Z: 0.00 SHEAR Y: 0.00 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |

23
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 3.04 AE: 3.04 |
| IZ: 1.0765E+01 IZE: 1.0765E+01 IY: 3.8045E+00 IYE: 3.8045E+00 |
| SZE_T: 4.3058E+00 SZE_C: 4.3058E+00 SYE_T: 2.2036E+00 SYE_C: 2.9874E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 1.00 LX: 151.10 LY: 151.10 LZ: 151.10 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 29

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 54 SECTION: 120CS50X2 LEN: 800.26 GOV.LOC: 800.26 |
| STATUS: PASS RATIO = 0.829 GOV.MODE: Bend + Compress GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 5.51 |
| BEND. Z: 4.29 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.5703E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 9.9301E+00 SYE_C: 4.5934E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 1.50 LX: 80.03 LY: 80.03 LZ: 80.03 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 55 SECTION: 120CS50X2 LEN: 175.99 GOV.LOC: 175.99 |
| STATUS: PASS RATIO = 0.938 GOV.MODE: Bend + Compress GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 5.52 |
| BEND. Z: 4.29 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.5703E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 9.9301E+00 SYE_C: 4.5934E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 6.56 KZ: 6.67 LX: 17.60 LY: 17.60 LZ: 17.60 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 30

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 56 SECTION: 70CS40X1.4 LEN: 1311.43 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.822 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 46.92 COMPRESS: 0.00 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |

24
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.7422E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 1.8367E+00 SYE_C: 3.3440E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 57 SECTION: 70CS40X1.4 LEN: 1311.43 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.814 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 1.85 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.7422E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 1.8367E+00 SYE_C: 3.3440E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 31

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 58 SECTION: 70CS40X1.4 LEN: 1311.43 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.816 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 46.92 COMPRESS: 0.00 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.7422E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 1.8367E+00 SYE_C: 3.3440E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 59 SECTION: 70CS40X1.4 LEN: 1311.43 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.828 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 1.85 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |

25
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.7422E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 1.8367E+00 SYE_C: 3.3440E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 32

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 60 SECTION: 70CS40X1.4 LEN: 1311.43 GOV.LOC: 1311.43 |
| STATUS: PASS RATIO = 0.828 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 46.92 COMPRESS: 0.00 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.8098E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 3.4470E+00 SYE_C: 1.8466E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 61 SECTION: 70CS40X1.4 LEN: 1311.43 GOV.LOC: 1311.43 |
| STATUS: PASS RATIO = 0.830 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 1.85 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.8098E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 3.4470E+00 SYE_C: 1.8466E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 33

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 62 SECTION: 70CS40X1.4 LEN: 1311.43 GOV.LOC: 1311.43 |
| STATUS: PASS RATIO = 0.829 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 46.92 COMPRESS: 0.00 |

26
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.8098E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 3.4470E+00 SYE_C: 1.8466E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 63 SECTION: 70CS40X1.4 LEN: 1311.43 GOV.LOC: 1311.43 |
| STATUS: PASS RATIO = 0.827 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 1.85 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.8098E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 3.4470E+00 SYE_C: 1.8466E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 34

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 66 SECTION: 120CS50X2 LEN: 950.00 GOV.LOC: 950.00 |
| STATUS: PASS RATIO = 0.819 GOV.MODE: Bend Z + Shear GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 115.69 COMPRESS: 0.00 |
| BEND. Z: 4.29 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.5703E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 9.9301E+00 SYE_C: 4.5934E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.42 KZ: 2.00 LX: 95.00 LY: 95.00 LZ: 95.00 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 67 SECTION: 120CS50X2 LEN: 1000.00 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.899 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 5.49 |

27
| BEND. Z: 4.07 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.5703E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 9.9301E+00 SYE_C: 4.5934E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.18 KZ: 2.00 LX: 100.00 LY: 100.00 LZ: 100.00 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 35

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 68 SECTION: 150CS50X2.5 LEN: 100.00 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.807 GOV.MODE: Bend Z + Shear GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 173.07 COMPRESS: 0.00 |
| BEND. Z: 7.28 BEND. Y: 0.00 SHEAR Z: 30.75 SHEAR Y: 50.53 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 7.04 AE: 7.04 |
| IZ: 2.3017E+02 IZE: 2.2565E+02 IY: 2.5661E+01 IYE: 2.3717E+01 |
| SZE_T: 3.0579E+01 SZE_C: 2.9611E+01 SYE_T: 7.4962E+00 SYE_C: 1.2917E+01 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 36.00 KZ: 1.00 LX: 10.00 LY: 10.00 LZ: 10.00 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 69 SECTION: 120CS50X2 LEN: 226.00 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.963 GOV.MODE: Bend + Compress GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 5.52 |
| BEND. Z: 4.29 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.5703E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 9.9301E+00 SYE_C: 4.5934E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 5.13 KZ: 5.22 LX: 22.60 LY: 22.60 LZ: 22.60 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 36

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 71 SECTION: 50CS30X2.5 LEN: 1511.00 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.957 GOV.MODE: Compression GOV.LOAD: 6 |

28
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 6.05 |
| BEND. Z: 0.00 BEND. Y: 0.00 SHEAR Z: 0.00 SHEAR Y: 0.00 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 3.04 AE: 3.04 |
| IZ: 1.0765E+01 IZE: 1.0765E+01 IY: 3.8045E+00 IYE: 3.8045E+00 |
| SZE_T: 4.3058E+00 SZE_C: 4.3058E+00 SYE_T: 2.2036E+00 SYE_C: 2.9874E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 1.00 LX: 151.10 LY: 151.10 LZ: 151.10 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 72 SECTION: 120CS50X2 LEN: 800.26 GOV.LOC: 800.26 |
| STATUS: PASS RATIO = 0.829 GOV.MODE: Bend + Compress GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 5.51 |
| BEND. Z: 4.29 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.4707E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 4.4895E+00 SYE_C: 8.5297E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 1.50 LX: 80.03 LY: 80.03 LZ: 80.03 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 37

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 73 SECTION: 120CS50X2 LEN: 175.99 GOV.LOC: 175.99 |
| STATUS: PASS RATIO = 0.938 GOV.MODE: Bend + Compress GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 5.52 |
| BEND. Z: 4.29 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.4707E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 4.4895E+00 SYE_C: 8.5297E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 6.56 KZ: 6.67 LX: 17.60 LY: 17.60 LZ: 17.60 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 74 SECTION: 70CS40X1.4 LEN: 1311.43 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.828 GOV.MODE: Bending Z GOV.LOAD: 7 |

29
| |
| RESISTANCES: AX.TENS: 46.92 COMPRESS: 0.00 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.7422E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 1.8367E+00 SYE_C: 3.3440E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 38

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 75 SECTION: 70CS40X1.4 LEN: 1311.43 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.830 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 1.85 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.7422E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 1.8367E+00 SYE_C: 3.3440E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 76 SECTION: 70CS40X1.4 LEN: 1311.43 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.829 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 46.92 COMPRESS: 0.00 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.7422E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 1.8367E+00 SYE_C: 3.3440E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 39

| UNITS : MM, KN, KNM, MPA |

| |

30
| MEMBER# 77 SECTION: 70CS40X1.4 LEN: 1311.43 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.827 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 1.85 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.7422E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 1.8367E+00 SYE_C: 3.3440E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 78 SECTION: 70CS40X1.4 LEN: 1311.39 GOV.LOC: 1311.39 |
| STATUS: PASS RATIO = 0.828 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 46.92 COMPRESS: 0.00 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.8098E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 3.4470E+00 SYE_C: 1.8466E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 40

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 79 SECTION: 70CS40X1.4 LEN: 1311.39 GOV.LOC: 1311.39 |
| STATUS: PASS RATIO = 0.830 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 1.85 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.8098E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 3.4470E+00 SYE_C: 1.8466E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |

31
| MEMBER# 80 SECTION: 70CS40X1.4 LEN: 1311.39 GOV.LOC: 1311.39 |
| STATUS: PASS RATIO = 0.829 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 46.92 COMPRESS: 0.00 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.8098E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 3.4470E+00 SYE_C: 1.8466E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 41

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 81 SECTION: 70CS40X1.4 LEN: 1311.39 GOV.LOC: 1311.39 |
| STATUS: PASS RATIO = 0.827 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 1.85 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.8098E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 3.4470E+00 SYE_C: 1.8466E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 84 SECTION: 120CS50X2 LEN: 950.00 GOV.LOC: 950.00 |
| STATUS: PASS RATIO = 0.815 GOV.MODE: Bend Z + Shear GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 115.69 COMPRESS: 0.00 |
| BEND. Z: 4.29 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.4707E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 4.4895E+00 SYE_C: 8.5297E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.42 KZ: 2.00 LX: 95.00 LY: 95.00 LZ: 95.00 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 42

32
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 85 SECTION: 120CS50X2 LEN: 1000.00 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.899 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 5.49 |
| BEND. Z: 4.07 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.4707E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 4.4895E+00 SYE_C: 8.5297E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.18 KZ: 2.00 LX: 100.00 LY: 100.00 LZ: 100.00 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 86 SECTION: 150CS50X2.5 LEN: 100.00 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.807 GOV.MODE: Bend Z + Shear GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 173.07 COMPRESS: 0.00 |
| BEND. Z: 7.28 BEND. Y: 0.00 SHEAR Z: 30.75 SHEAR Y: 50.53 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 7.04 AE: 7.04 |
| IZ: 2.3017E+02 IZE: 2.2565E+02 IY: 2.5661E+01 IYE: 2.3717E+01 |
| SZE_T: 3.0579E+01 SZE_C: 2.9611E+01 SYE_T: 7.4962E+00 SYE_C: 1.2917E+01 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 36.00 KZ: 1.00 LX: 10.00 LY: 10.00 LZ: 10.00 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 43

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 87 SECTION: 120CS50X2 LEN: 226.00 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.957 GOV.MODE: Bend + Compress GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 5.52 |
| BEND. Z: 4.29 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.4707E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 4.4895E+00 SYE_C: 8.5297E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 5.13 KZ: 5.22 LX: 22.60 LY: 22.60 LZ: 22.60 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|

33
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 89 SECTION: 50CS30X2.5 LEN: 1511.00 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.949 GOV.MODE: Compression GOV.LOAD: 6 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 6.05 |
| BEND. Z: 0.00 BEND. Y: 0.00 SHEAR Z: 0.00 SHEAR Y: 0.00 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 3.04 AE: 3.04 |
| IZ: 1.0765E+01 IZE: 1.0765E+01 IY: 3.8045E+00 IYE: 3.8045E+00 |
| SZE_T: 4.3058E+00 SZE_C: 4.3058E+00 SYE_T: 2.2036E+00 SYE_C: 2.9874E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 1.00 LX: 151.10 LY: 151.10 LZ: 151.10 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 44

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 90 SECTION: 120CS50X2 LEN: 800.26 GOV.LOC: 800.26 |
| STATUS: PASS RATIO = 0.827 GOV.MODE: Bend + Compress GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 5.51 |
| BEND. Z: 4.29 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.4707E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 4.4895E+00 SYE_C: 8.5297E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 1.50 LX: 80.03 LY: 80.03 LZ: 80.03 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 91 SECTION: 120CS50X2 LEN: 175.99 GOV.LOC: 175.99 |
| STATUS: PASS RATIO = 0.935 GOV.MODE: Bend + Compress GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 5.52 |
| BEND. Z: 4.29 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.5703E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 9.9301E+00 SYE_C: 4.5934E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 6.56 KZ: 6.67 LX: 17.60 LY: 17.60 LZ: 17.60 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|

34
 STAAD SPACE -- PAGE NO. 45

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 92 SECTION: 70CS40X1.4 LEN: 1311.50 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.828 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 46.92 COMPRESS: 0.00 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.7422E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 1.8367E+00 SYE_C: 3.3440E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.15 LY: 131.15 LZ: 131.15 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 93 SECTION: 70CS40X1.4 LEN: 1311.50 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.830 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 1.85 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.7422E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 1.8367E+00 SYE_C: 3.3440E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.15 LY: 131.15 LZ: 131.15 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 46

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 94 SECTION: 70CS40X1.4 LEN: 1311.50 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.829 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 46.92 COMPRESS: 0.00 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.7422E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 1.8367E+00 SYE_C: 3.3440E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.15 LY: 131.15 LZ: 131.15 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

35
|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 95 SECTION: 70CS40X1.4 LEN: 1311.50 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.827 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 1.85 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.7422E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 1.8367E+00 SYE_C: 3.3440E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.15 LY: 131.15 LZ: 131.15 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 47

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 102 SECTION: 120CS50X2 LEN: 950.00 GOV.LOC: 950.00 |
| STATUS: PASS RATIO = 0.707 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 115.69 COMPRESS: 0.00 |
| BEND. Z: 4.13 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.4707E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 4.4895E+00 SYE_C: 8.5297E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.42 KZ: 2.00 LX: 95.00 LY: 95.00 LZ: 95.00 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 105 SECTION: 120CS50X2 LEN: 226.00 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.806 GOV.MODE: Bend + Compress GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 5.52 |
| BEND. Z: 4.29 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.4707E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 4.4895E+00 SYE_C: 8.5297E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 5.13 KZ: 5.22 LX: 22.60 LY: 22.60 LZ: 22.60 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

36
|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 48

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 108 SECTION: 120CS50X2 LEN: 800.26 GOV.LOC: 800.26 |
| STATUS: PASS RATIO = 0.693 GOV.MODE: Bend + Compress GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 5.51 |
| BEND. Z: 4.29 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.4707E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 4.4895E+00 SYE_C: 8.5297E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 1.50 LX: 80.03 LY: 80.03 LZ: 80.03 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 114 SECTION: 70CS40X1.4 LEN: 1311.40 GOV.LOC: 1311.40 |
| STATUS: PASS RATIO = 0.652 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 46.92 COMPRESS: 0.00 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.8098E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 3.4470E+00 SYE_C: 1.8466E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 49

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 115 SECTION: 70CS40X1.4 LEN: 1311.40 GOV.LOC: 1311.40 |
| STATUS: PASS RATIO = 0.652 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 1.85 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.8098E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 3.4470E+00 SYE_C: 1.8466E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |

37
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 116 SECTION: 70CS40X1.4 LEN: 1311.40 GOV.LOC: 1311.40 |
| STATUS: PASS RATIO = 0.652 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 46.92 COMPRESS: 0.00 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.8098E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 3.4470E+00 SYE_C: 1.8466E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 50

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 117 SECTION: 70CS40X1.4 LEN: 1311.40 GOV.LOC: 1311.40 |
| STATUS: PASS RATIO = 0.652 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 1.85 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.8098E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 3.4470E+00 SYE_C: 1.8466E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 124 SECTION: 70CS40X1.4 LEN: 950.00 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.596 GOV.MODE: Bend Z + Shear GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 0.00 |
| BEND. Z: 1.08 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.8098E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 1.8629E+00 SYE_C: 3.3916E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 2.00 KZ: 2.00 LX: 95.00 LY: 95.00 LZ: 95.00 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |

38
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 51

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 125 SECTION: 70CS40X1.4 LEN: 950.00 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.596 GOV.MODE: Bend Z + Shear GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 0.00 |
| BEND. Z: 1.08 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.8098E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 1.8629E+00 SYE_C: 3.3916E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 2.00 KZ: 2.00 LX: 95.00 LY: 95.00 LZ: 95.00 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 126 SECTION: 70CS40X1.4 LEN: 950.00 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.596 GOV.MODE: Bend Z + Shear GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 0.00 |
| BEND. Z: 1.08 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.8098E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 1.8629E+00 SYE_C: 3.3916E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 2.00 KZ: 2.00 LX: 95.00 LY: 95.00 LZ: 95.00 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 52

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 127 SECTION: 70CS40X1.4 LEN: 950.00 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.596 GOV.MODE: Bend Z + Shear GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 0.00 |
| BEND. Z: 1.08 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.8098E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 1.8629E+00 SYE_C: 3.3916E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 2.00 KZ: 2.00 LX: 95.00 LY: 95.00 LZ: 95.00 |

39
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 128 SECTION: 70CS40X1.4 LEN: 950.00 GOV.LOC: 950.00 |
| STATUS: PASS RATIO = 0.596 GOV.MODE: Bend Z + Shear GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 0.00 |
| BEND. Z: 1.08 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.8098E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 3.4470E+00 SYE_C: 1.8466E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 2.00 KZ: 2.00 LX: 95.00 LY: 95.00 LZ: 95.00 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 53

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 129 SECTION: 70CS40X1.4 LEN: 950.00 GOV.LOC: 950.00 |
| STATUS: PASS RATIO = 0.596 GOV.MODE: Bend Z + Shear GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 0.00 |
| BEND. Z: 1.08 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.8098E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 3.4470E+00 SYE_C: 1.8466E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 2.00 KZ: 2.00 LX: 95.00 LY: 95.00 LZ: 95.00 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 130 SECTION: 70CS40X1.4 LEN: 950.00 GOV.LOC: 950.00 |
| STATUS: PASS RATIO = 0.596 GOV.MODE: Bend Z + Shear GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 0.00 |
| BEND. Z: 1.08 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.8098E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 3.4470E+00 SYE_C: 1.8466E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 2.00 KZ: 2.00 LX: 95.00 LY: 95.00 LZ: 95.00 |

40
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 54

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 131 SECTION: 70CS40X1.4 LEN: 950.00 GOV.LOC: 950.00 |
| STATUS: PASS RATIO = 0.596 GOV.MODE: Bend Z + Shear GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 0.00 |
| BEND. Z: 1.08 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.8098E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 3.4470E+00 SYE_C: 1.8466E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 2.00 KZ: 2.00 LX: 95.00 LY: 95.00 LZ: 95.00 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 138 SECTION: 150CS50X2.5 LEN: 1696.04 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.645 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 173.07 COMPRESS: 0.00 |
| BEND. Z: 6.64 BEND. Y: 0.00 SHEAR Z: 30.75 SHEAR Y: 50.53 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 7.04 AE: 7.04 |
| IZ: 2.3017E+02 IZE: 2.3017E+02 IY: 2.5661E+01 IYE: 2.5661E+01 |
| SZE_T: 3.1191E+01 SZE_C: 3.0203E+01 SYE_T: 8.1106E+00 SYE_C: 1.3975E+01 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 2.12 KZ: 1.00 LX: 169.60 LY: 169.60 LZ: 169.60 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 55

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 139 SECTION: 150CS50X2.5 LEN: 1696.04 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.751 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 173.07 COMPRESS: 0.00 |
| BEND. Z: 6.64 BEND. Y: 0.00 SHEAR Z: 30.75 SHEAR Y: 50.53 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 7.04 AE: 7.04 |
| IZ: 2.3017E+02 IZE: 2.3017E+02 IY: 2.5661E+01 IYE: 2.5661E+01 |
| SZE_T: 3.1191E+01 SZE_C: 3.0203E+01 SYE_T: 8.1106E+00 SYE_C: 1.3975E+01 |
| |
| INPUT PARAMETERS : |

41
| |
| KX: 1.00 KY: 2.12 KZ: 1.00 LX: 169.60 LY: 169.60 LZ: 169.60 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 140 SECTION: 150CS50X2.5 LEN: 1696.04 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.751 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 173.07 COMPRESS: 0.00 |
| BEND. Z: 6.64 BEND. Y: 0.00 SHEAR Z: 30.75 SHEAR Y: 50.53 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 7.04 AE: 7.04 |
| IZ: 2.3017E+02 IZE: 2.3017E+02 IY: 2.5661E+01 IYE: 2.5661E+01 |
| SZE_T: 3.1191E+01 SZE_C: 3.0203E+01 SYE_T: 8.1106E+00 SYE_C: 1.3975E+01 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 2.12 KZ: 1.00 LX: 169.60 LY: 169.60 LZ: 169.60 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 56

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 141 SECTION: 150CS50X2.5 LEN: 1696.04 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.750 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 173.07 COMPRESS: 0.00 |
| BEND. Z: 6.64 BEND. Y: 0.00 SHEAR Z: 30.75 SHEAR Y: 50.53 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 7.04 AE: 7.04 |
| IZ: 2.3017E+02 IZE: 2.3017E+02 IY: 2.5661E+01 IYE: 2.5661E+01 |
| SZE_T: 3.1191E+01 SZE_C: 3.0203E+01 SYE_T: 8.1106E+00 SYE_C: 1.3975E+01 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 2.12 KZ: 1.00 LX: 169.60 LY: 169.60 LZ: 169.60 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 142 SECTION: 150CS50X2.5 LEN: 1696.04 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.942 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 173.07 COMPRESS: 0.00 |
| BEND. Z: 5.28 BEND. Y: 0.00 SHEAR Z: 30.75 SHEAR Y: 50.53 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 7.04 AE: 7.04 |
| IZ: 2.3017E+02 IZE: 2.3017E+02 IY: 2.5661E+01 IYE: 2.5661E+01 |
| SZE_T: 3.1191E+01 SZE_C: 3.0203E+01 SYE_T: 8.1106E+00 SYE_C: 1.3975E+01 |
| |
| INPUT PARAMETERS : |

42
| |
| KX: 1.00 KY: 2.12 KZ: 1.00 LX: 169.60 LY: 169.60 LZ: 169.60 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 57

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 143 SECTION: 150CS50X2.5 LEN: 1696.04 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.944 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 173.07 COMPRESS: 0.00 |
| BEND. Z: 5.28 BEND. Y: 0.00 SHEAR Z: 30.75 SHEAR Y: 50.53 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 7.04 AE: 7.04 |
| IZ: 2.3017E+02 IZE: 2.3017E+02 IY: 2.5661E+01 IYE: 2.5661E+01 |
| SZE_T: 3.1191E+01 SZE_C: 3.0203E+01 SYE_T: 8.1106E+00 SYE_C: 1.3975E+01 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 2.12 KZ: 1.00 LX: 169.60 LY: 169.60 LZ: 169.60 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 160 SECTION: 70CS40X1.4 LEN: 1311.40 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.860 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 46.92 COMPRESS: 0.00 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.7422E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 1.8367E+00 SYE_C: 3.3440E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 58

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 161 SECTION: 120CS50X2 LEN: 950.00 GOV.LOC: 950.00 |
| STATUS: PASS RATIO = 0.862 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 115.69 COMPRESS: 0.00 |
| BEND. Z: 4.13 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.4707E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 4.4895E+00 SYE_C: 8.5297E+00 |

43
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.42 KZ: 2.00 LX: 95.00 LY: 95.00 LZ: 95.00 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 162 SECTION: 70CS40X1.4 LEN: 1311.40 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.832 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 1.85 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.7422E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 1.8367E+00 SYE_C: 3.3440E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 59

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 163 SECTION: 120CS50X2 LEN: 1000.00 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.876 GOV.MODE: Bend Z + Shear GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 5.49 |
| BEND. Z: 4.29 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.4707E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 4.4895E+00 SYE_C: 8.5297E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.18 KZ: 2.00 LX: 100.00 LY: 100.00 LZ: 100.00 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 164 SECTION: 150CS50X2.5 LEN: 100.00 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.810 GOV.MODE: Bend Z + Shear GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 173.07 COMPRESS: 0.00 |
| BEND. Z: 7.28 BEND. Y: 0.00 SHEAR Z: 30.75 SHEAR Y: 50.53 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 7.04 AE: 7.04 |
| IZ: 2.3017E+02 IZE: 2.2565E+02 IY: 2.5661E+01 IYE: 2.3717E+01 |
| SZE_T: 3.0579E+01 SZE_C: 2.9611E+01 SYE_T: 7.4962E+00 SYE_C: 1.2917E+01 |

44
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 36.00 KZ: 1.00 LX: 10.00 LY: 10.00 LZ: 10.00 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 60

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 165 SECTION: 70CS40X1.4 LEN: 1311.40 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.877 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 1.85 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.7422E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 1.8367E+00 SYE_C: 3.3440E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 166 SECTION: 120CS50X2 LEN: 226.00 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.990 GOV.MODE: Bend + Compress GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 5.52 |
| BEND. Z: 4.29 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.4707E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 4.4895E+00 SYE_C: 8.5297E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 5.13 KZ: 5.22 LX: 22.60 LY: 22.60 LZ: 22.60 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 61

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 167 SECTION: 50CS30X2.5 LEN: 1511.00 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.983 GOV.MODE: Compression GOV.LOAD: 6 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 6.05 |
| BEND. Z: 0.00 BEND. Y: 0.00 SHEAR Z: 0.00 SHEAR Y: 0.00 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 3.04 AE: 3.04 |

45
| IZ: 1.0765E+01 IZE: 1.0765E+01 IY: 3.8045E+00 IYE: 3.8045E+00 |
| SZE_T: 4.3058E+00 SZE_C: 4.3058E+00 SYE_T: 2.2036E+00 SYE_C: 2.9874E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 1.00 LX: 151.10 LY: 151.10 LZ: 151.10 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 168 SECTION: 70CS40X1.4 LEN: 1311.40 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.869 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 46.92 COMPRESS: 0.00 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.7422E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 1.8367E+00 SYE_C: 3.3440E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 62

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 169 SECTION: 120CS50X2 LEN: 800.26 GOV.LOC: 800.26 |
| STATUS: PASS RATIO = 0.852 GOV.MODE: Bend + Compress GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 5.51 |
| BEND. Z: 4.29 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.4707E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 4.4895E+00 SYE_C: 8.5297E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 1.50 LX: 80.03 LY: 80.03 LZ: 80.03 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 170 SECTION: 120CS50X2 LEN: 175.99 GOV.LOC: 175.99 |
| STATUS: PASS RATIO = 0.965 GOV.MODE: Bend + Compress GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 5.52 |
| BEND. Z: 4.29 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |

46
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.5703E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 9.9301E+00 SYE_C: 4.5934E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 6.56 KZ: 6.67 LX: 17.60 LY: 17.60 LZ: 17.60 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 63

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 171 SECTION: 150CS50X2.5 LEN: 1696.04 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.944 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 173.07 COMPRESS: 0.00 |
| BEND. Z: 5.28 BEND. Y: 0.00 SHEAR Z: 30.75 SHEAR Y: 50.53 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 7.04 AE: 7.04 |
| IZ: 2.3017E+02 IZE: 2.3017E+02 IY: 2.5661E+01 IYE: 2.5661E+01 |
| SZE_T: 3.1191E+01 SZE_C: 3.0203E+01 SYE_T: 8.1106E+00 SYE_C: 1.3975E+01 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 2.12 KZ: 1.00 LX: 169.60 LY: 169.60 LZ: 169.60 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 176 SECTION: 70CS40X1.4 LEN: 1311.50 GOV.LOC: 1311.50 |
| STATUS: PASS RATIO = 0.860 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 46.92 COMPRESS: 0.00 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.8098E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 3.4470E+00 SYE_C: 1.8466E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.15 LY: 131.15 LZ: 131.15 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 64

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 177 SECTION: 70CS40X1.4 LEN: 1311.50 GOV.LOC: 1311.50 |
| STATUS: PASS RATIO = 0.877 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 1.85 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |

47
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.8098E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 3.4470E+00 SYE_C: 1.8466E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.15 LY: 131.15 LZ: 131.15 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 178 SECTION: 70CS40X1.4 LEN: 1311.50 GOV.LOC: 1311.50 |
| STATUS: PASS RATIO = 0.869 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 46.92 COMPRESS: 0.00 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.8098E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 3.4470E+00 SYE_C: 1.8466E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.15 LY: 131.15 LZ: 131.15 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 65

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 179 SECTION: 70CS40X1.4 LEN: 1311.50 GOV.LOC: 1311.50 |
| STATUS: PASS RATIO = 0.832 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 1.85 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.8098E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 3.4470E+00 SYE_C: 1.8466E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.15 LY: 131.15 LZ: 131.15 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 180 SECTION: 70CS40X1.4 LEN: 1311.40 GOV.LOC: 1311.40 |
| STATUS: PASS RATIO = 0.822 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 46.92 COMPRESS: 0.00 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |

48
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.8098E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 3.4470E+00 SYE_C: 1.8466E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 66

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 181 SECTION: 70CS40X1.4 LEN: 1311.40 GOV.LOC: 1311.40 |
| STATUS: PASS RATIO = 0.814 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 1.85 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.8098E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 3.4470E+00 SYE_C: 1.8466E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 183 SECTION: 70CS40X1.4 LEN: 1311.40 GOV.LOC: 1311.40 |
| STATUS: PASS RATIO = 0.816 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 46.92 COMPRESS: 0.00 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.8098E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 3.4470E+00 SYE_C: 1.8466E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 67

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 184 SECTION: 70CS40X1.4 LEN: 1311.40 GOV.LOC: 1311.40 |
| STATUS: PASS RATIO = 0.828 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 1.85 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |

49
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.8098E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 3.4470E+00 SYE_C: 1.8466E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 186 SECTION: 70CS40X1.4 LEN: 1311.40 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.822 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 46.92 COMPRESS: 0.00 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.7422E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 1.8367E+00 SYE_C: 3.3440E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 68

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 187 SECTION: 70CS40X1.4 LEN: 1311.40 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.814 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 1.85 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.7422E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 1.8367E+00 SYE_C: 3.3440E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 188 SECTION: 70CS40X1.4 LEN: 1311.40 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.816 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 46.92 COMPRESS: 0.00 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |

50
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.7422E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 1.8367E+00 SYE_C: 3.3440E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 69

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 189 SECTION: 70CS40X1.4 LEN: 1311.40 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.828 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 1.85 |
| BEND. Z: 0.97 BEND. Y: 0.00 SHEAR Z: 12.94 SHEAR Y: 12.35 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3569.01 COLD WORK FYLD: 3569.01 FU: 4588.72 A: 2.23 AE: 2.23 |
| IZ: 1.7980E+01 IZE: 1.7980E+01 IY: 4.8098E+00 IYE: 4.7422E+00 |
| SZE_T: 5.1370E+00 SZE_C: 5.1370E+00 SYE_T: 1.8367E+00 SYE_C: 3.3440E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 2.00 LX: 131.14 LY: 131.14 LZ: 131.14 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 194 SECTION: 150CS50X2.5 LEN: 100.00 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.692 GOV.MODE: Bend Z + Shear GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 173.07 COMPRESS: 0.00 |
| BEND. Z: 7.28 BEND. Y: 0.00 SHEAR Z: 30.75 SHEAR Y: 50.53 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 7.04 AE: 7.04 |
| IZ: 2.3017E+02 IZE: 2.2565E+02 IY: 2.5661E+01 IYE: 2.3717E+01 |
| SZE_T: 3.0579E+01 SZE_C: 2.9611E+01 SYE_T: 7.4962E+00 SYE_C: 1.2917E+01 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 36.00 KZ: 1.00 LX: 10.00 LY: 10.00 LZ: 10.00 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 70

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 195 SECTION: 50CS30X2.5 LEN: 1511.00 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.804 GOV.MODE: Compression GOV.LOAD: 6 |
| |

51
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 6.05 |
| BEND. Z: 0.00 BEND. Y: 0.00 SHEAR Z: 0.00 SHEAR Y: 0.00 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 3.04 AE: 3.04 |
| IZ: 1.0765E+01 IZE: 1.0765E+01 IY: 3.8045E+00 IYE: 3.8045E+00 |
| SZE_T: 4.3058E+00 SZE_C: 4.3058E+00 SYE_T: 2.2036E+00 SYE_C: 2.9874E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.00 KZ: 1.00 LX: 151.10 LY: 151.10 LZ: 151.10 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 196 SECTION: 120CS50X2 LEN: 175.99 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.882 GOV.MODE: Bend + Compress GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 5.50 |
| BEND. Z: 3.69 BEND. Y: 0.00 SHEAR Z: 22.59 SHEAR Y: 30.01 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 3600.00 COLD WORK FYLD: 3600.00 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.5009E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 4.5220E+00 SYE_C: 8.9292E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 6.56 KZ: 6.67 LX: 17.60 LY: 17.60 LZ: 17.60 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 71

| UNITS : MM, KN, KNM, MPA |

| |
| MEMBER# 197 SECTION: 150CS50X2.5 LEN: 1696.04 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.811 GOV.MODE: Bending Z GOV.LOAD: 7 |
| |
| RESISTANCES: AX.TENS: 173.07 COMPRESS: 0.00 |
| BEND. Z: 5.28 BEND. Y: 0.00 SHEAR Z: 30.75 SHEAR Y: 50.53 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 7.04 AE: 7.04 |
| IZ: 2.3017E+02 IZE: 2.3017E+02 IY: 2.5661E+01 IYE: 2.5661E+01 |
| SZE_T: 3.1191E+01 SZE_C: 3.0203E+01 SYE_T: 8.1106E+00 SYE_C: 1.3975E+01 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 2.12 KZ: 1.00 LX: 169.60 LY: 169.60 LZ: 169.60 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

|-----------------------------------------------------------------------------|
| UNITS : MM, KN, KNM, MPA |
| |
| MEMBER# 198 SECTION: 120CS50X2 LEN: 1000.00 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.726 GOV.MODE: Bend Z + Shear GOV.LOAD: 7 |
| |

52
| RESISTANCES: AX.TENS: 0.00 COMPRESS: 5.49 |
| BEND. Z: 4.29 BEND. Y: 0.00 SHEAR Z: 26.24 SHEAR Y: 32.34 |
| |
| UNITS : CM, KG, KG-CM, KG/CM^2 |
| |
| FYLD: 4180.84 COLD WORK FYLD: 4180.84 FU: 4588.72 A: 4.70 AE: 4.70 |
| IZ: 1.0458E+02 IZE: 1.0458E+02 IY: 1.5703E+01 IYE: 1.4707E+01 |
| SZE_T: 1.7431E+01 SZE_C: 1.7431E+01 SYE_T: 4.4895E+00 SYE_C: 8.5297E+00 |
| |
| INPUT PARAMETERS : |
| |
| KX: 1.00 KY: 1.18 KZ: 2.00 LX: 100.00 LY: 100.00 LZ: 100.00 |
| CMY: 0.85 CMZ: 0.85 NSF: 1.00 RATIO: 1.00 |
| Torsional-flexural buckling restraint provided & Web adequately stiffened |
|-----------------------------------------------------------------------------|

STAAD SPACE -- PAGE NO. 72

152. **********************************
153. LOAD LIST 4 5 8
154. PARAMETER 2
155. CODE INDIAN
156. FYLD 415000 MEMB 28 29 46 47 64 65 82 83 100 101 118 119 182 185
157. MAIN 400 MEMB 28 29 46 47 64 65 82 83 100 101 118 119 182 185
158. RATIO 1 MEMB 28 29 46 47 64 65 82 83 100 101 118 119 182 185
159. TRACK 2 MEMB 28 29 46 47 64 65 82 83 100 101 118 119 182 185
160. STEEL MEMBER TAKE OFF ALL
STAAD SPACE -- PAGE NO. 73

STEEL TAKE OFF

STEEL TAKE-OFF
--------------

PROFILE LENGTH(METE) WEIGHT(KN )

ST 120CS50X2 25.22 0.911

ST 150CS50X2.5 14.37 0.777
ST 50CS30X2.5 12.09 0.282
ST 70CS40X1.4 81.04 1.391
PRISMATIC STEEL 16.46 0.143
----------------
TOTAL = 3.503

TOTAL VOLUME OF PRISMATIC STEEL SECTIONS = 0.00 CUBIC METE

MEMBER PROFILE LENGTH WEIGHT

(METE) (KN )

1 ST 120CS50X2 0.95 0.034

5 ST 120CS50X2 1.00 0.036
6 ST 150CS50X2.5 0.10 0.005
7 ST 120CS50X2 0.23 0.008
9 ST 50CS30X2.5 1.51 0.035
10 ST 120CS50X2 0.80 0.029
11 ST 120CS50X2 0.18 0.006
12 ST 120CS50X2 0.95 0.034
13 ST 120CS50X2 1.00 0.036
14 ST 150CS50X2.5 0.10 0.005
15 ST 120CS50X2 0.23 0.008
17 ST 50CS30X2.5 1.51 0.035
18 ST 120CS50X2 0.80 0.029
19 ST 120CS50X2 0.18 0.006
20 ST 70CS40X1.4 1.31 0.023
21 ST 70CS40X1.4 1.31 0.023
22 ST 70CS40X1.4 1.31 0.023
23 ST 70CS40X1.4 1.31 0.023
24 ST 70CS40X1.4 1.31 0.023

53
 25 ST 70CS40X1.4 1.31 0.023
26 ST 70CS40X1.4 1.31 0.023
27 ST 70CS40X1.4 1.31 0.023
28 PRI SMAT 1.18 0.010
29 PRI SMAT 1.18 0.010
30 ST 120CS50X2 0.95 0.034
31 ST 120CS50X2 1.00 0.036
32 ST 150CS50X2.5 0.10 0.005
33 ST 120CS50X2 0.23 0.008
35 ST 50CS30X2.5 1.51 0.035
36 ST 120CS50X2 0.80 0.029
37 ST 120CS50X2 0.18 0.006
38 ST 70CS40X1.4 1.31 0.023
39 ST 70CS40X1.4 1.31 0.023
40 ST 70CS40X1.4 1.31 0.023
41 ST 70CS40X1.4 1.31 0.023
42 ST 70CS40X1.4 1.31 0.023
43 ST 70CS40X1.4 1.31 0.023
44 ST 70CS40X1.4 1.31 0.023
STAAD SPACE -- PAGE NO. 74

45 ST 70CS40X1.4 1.31 0.023

46 PRI SMAT 1.18 0.010
47 PRI SMAT 1.18 0.010
48 ST 120CS50X2 0.95 0.034
49 ST 120CS50X2 1.00 0.036
50 ST 150CS50X2.5 0.10 0.005
51 ST 120CS50X2 0.23 0.008
53 ST 50CS30X2.5 1.51 0.035
54 ST 120CS50X2 0.80 0.029
55 ST 120CS50X2 0.18 0.006
56 ST 70CS40X1.4 1.31 0.023
57 ST 70CS40X1.4 1.31 0.023
58 ST 70CS40X1.4 1.31 0.023
59 ST 70CS40X1.4 1.31 0.023
60 ST 70CS40X1.4 1.31 0.023
61 ST 70CS40X1.4 1.31 0.023
62 ST 70CS40X1.4 1.31 0.023
63 ST 70CS40X1.4 1.31 0.023
64 PRI SMAT 1.18 0.010
65 PRI SMAT 1.18 0.010
66 ST 120CS50X2 0.95 0.034
67 ST 120CS50X2 1.00 0.036
68 ST 150CS50X2.5 0.10 0.005
69 ST 120CS50X2 0.23 0.008
71 ST 50CS30X2.5 1.51 0.035
72 ST 120CS50X2 0.80 0.029
73 ST 120CS50X2 0.18 0.006
74 ST 70CS40X1.4 1.31 0.023
75 ST 70CS40X1.4 1.31 0.023
76 ST 70CS40X1.4 1.31 0.023
77 ST 70CS40X1.4 1.31 0.023
78 ST 70CS40X1.4 1.31 0.023
79 ST 70CS40X1.4 1.31 0.023
80 ST 70CS40X1.4 1.31 0.023
81 ST 70CS40X1.4 1.31 0.023
82 PRI SMAT 1.18 0.010
83 PRI SMAT 1.18 0.010
84 ST 120CS50X2 0.95 0.034
85 ST 120CS50X2 1.00 0.036
86 ST 150CS50X2.5 0.10 0.005
87 ST 120CS50X2 0.23 0.008
89 ST 50CS30X2.5 1.51 0.035
90 ST 120CS50X2 0.80 0.029
91 ST 120CS50X2 0.18 0.006
92 ST 70CS40X1.4 1.31 0.023
93 ST 70CS40X1.4 1.31 0.023
94 ST 70CS40X1.4 1.31 0.023
95 ST 70CS40X1.4 1.31 0.023
100 PRI SMAT 1.18 0.010
101 PRI SMAT 1.18 0.010

54
 102 ST 120CS50X2 0.95 0.034
105 ST 120CS50X2 0.23 0.008
108 ST 120CS50X2 0.80 0.029
114 ST 70CS40X1.4 1.31 0.023
115 ST 70CS40X1.4 1.31 0.023
116 ST 70CS40X1.4 1.31 0.023
STAAD SPACE -- PAGE NO. 75

117 ST 70CS40X1.4 1.31 0.023

118 PRI SMAT 1.18 0.010
119 PRI SMAT 1.18 0.010
124 ST 70CS40X1.4 0.95 0.016
125 ST 70CS40X1.4 0.95 0.016
126 ST 70CS40X1.4 0.95 0.016
127 ST 70CS40X1.4 0.95 0.016
128 ST 70CS40X1.4 0.95 0.016
129 ST 70CS40X1.4 0.95 0.016
130 ST 70CS40X1.4 0.95 0.016
131 ST 70CS40X1.4 0.95 0.016
138 ST 150CS50X2.5 1.70 0.092
139 ST 150CS50X2.5 1.70 0.092
140 ST 150CS50X2.5 1.70 0.092
141 ST 150CS50X2.5 1.70 0.092
142 ST 150CS50X2.5 1.70 0.092
143 ST 150CS50X2.5 1.70 0.092
160 ST 70CS40X1.4 1.31 0.023
161 ST 120CS50X2 0.95 0.034
162 ST 70CS40X1.4 1.31 0.023
163 ST 120CS50X2 1.00 0.036
164 ST 150CS50X2.5 0.10 0.005
165 ST 70CS40X1.4 1.31 0.023
166 ST 120CS50X2 0.23 0.008
167 ST 50CS30X2.5 1.51 0.035
168 ST 70CS40X1.4 1.31 0.023
169 ST 120CS50X2 0.80 0.029
170 ST 120CS50X2 0.18 0.006
171 ST 150CS50X2.5 1.70 0.092
176 ST 70CS40X1.4 1.31 0.023
177 ST 70CS40X1.4 1.31 0.023
178 ST 70CS40X1.4 1.31 0.023
179 ST 70CS40X1.4 1.31 0.023
180 ST 70CS40X1.4 1.31 0.023
181 ST 70CS40X1.4 1.31 0.023
182 PRI SMAT 1.18 0.010
183 ST 70CS40X1.4 1.31 0.023
184 ST 70CS40X1.4 1.31 0.023
185 PRI SMAT 1.18 0.010
186 ST 70CS40X1.4 1.31 0.023
187 ST 70CS40X1.4 1.31 0.023
188 ST 70CS40X1.4 1.31 0.023
189 ST 70CS40X1.4 1.31 0.023
194 ST 150CS50X2.5 0.10 0.005
195 ST 50CS30X2.5 1.51 0.035
196 ST 120CS50X2 0.18 0.006
197 ST 150CS50X2.5 1.70 0.092
198 ST 120CS50X2 1.00 0.036
----------------
TOTAL = 3.503

************ END OF DATA FROM INTERNAL STORAGE ************

161. CHECK CODE MEMB 28 29 46 47 64 65 82 83 100 101 118 119 182 185
STAAD SPACE -- PAGE NO. 76

STEEL DESIGN

55
 STAAD SPACE -- PAGE NO. 77

STAAD.PRO CODE CHECKING - (IS-800 )

********************************************

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CM UNIT |
| * |=============================| ------------ |
|MEMBER 28 * | IS COLDFORMED SECTIONS | AX = 1.1 |
| * | PRI SMAT | --Z AY = 1.0 |
|DESIGN CODE * | | AZ = 1.0 |
| IS-800 * =============================== SY = 0.2 |
| * SZ = 0.2 |
| * |<---LENGTH (ME= 1.18 --->| RY = 0.3 |
|************* RZ = 0.3 |
| |
| 0.0( KN-METR) |
|PARAMETER |L0 L0 STRESSES |
|IN NEWT MM |L0 L0 IN NEWT MM|
|--------------- +L0 L0 -------------|
| KL/R-Y= 392.0 |L0 L0 FA = 7.7 |
| KL/R-Z= 392.0 +L0 L0 fa = 0.0 |
| UNL = 1176.0 |L0 L0 FCZ = 0.0 |
| C = 400.0 +L0 L0 FTZ = 0.0 |
| CMY = 0.00 |L0 L0 FCY = 0.0 |
| CMZ = 0.00 +L0 L0 FTY = 0.0 |
| FYLD = 415.0 |L0 L0 fbz = 0.0 |
| NSF = 1.0 +---+---+---+---+---+---+---+---+---+---| fby = 0.0 |
| DFF = 0.0 0.0 FV = 0.0 |
| dff = 0.0 ABSOLUTE MZ ENVELOPE fv = 0.0 |
| (WITH LOAD NO.) |
| |
| MAX FORCE/ MOMENT SUMMARY ( KN-METR) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 1.2 0.0 0.0 0.0 0.0 |
| LOADING 5 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY ( KN-METR) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS COMPRESSION 0.002 4 |
| 0.00 C 0.0 0.0 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 78

STAAD.PRO CODE CHECKING - (IS-800 )

********************************************

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CM UNIT |
| * |=============================| ------------ |
|MEMBER 29 * | IS COLDFORMED SECTIONS | AX = 1.1 |
| * | PRI SMAT | --Z AY = 1.0 |

56
|DESIGN CODE * | | AZ = 1.0 |
| IS-800 * =============================== SY = 0.2 |
| * SZ = 0.2 |
| * |<---LENGTH (ME= 1.18 --->| RY = 0.3 |
|************* RZ = 0.3 |
| |
| 0.0( KN-METR) |
|PARAMETER |L0 L0 STRESSES |
|IN NEWT MM |L0 L0 IN NEWT MM|
|--------------- +L0 L0 -------------|
| KL/R-Y= 392.0 |L0 L0 FA = 7.7 |
| KL/R-Z= 392.0 +L0 L0 fa = 0.0 |
| UNL = 1176.0 |L0 L0 FCZ = 0.0 |
| C = 400.0 +L0 L0 FTZ = 0.0 |
| CMY = 0.00 |L0 L0 FCY = 0.0 |
| CMZ = 0.00 +L0 L0 FTY = 0.0 |
| FYLD = 415.0 |L0 L0 fbz = 0.0 |
| NSF = 1.0 +---+---+---+---+---+---+---+---+---+---| fby = 0.0 |
| DFF = 0.0 0.0 FV = 0.0 |
| dff = 0.0 ABSOLUTE MZ ENVELOPE fv = 0.0 |
| (WITH LOAD NO.) |
| |
| MAX FORCE/ MOMENT SUMMARY ( KN-METR) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 5 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY ( KN-METR) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS COMPRESSION 0.005 5 |
| 0.00 C 0.0 0.0 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 79

STAAD.PRO CODE CHECKING - (IS-800 )

********************************************

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CM UNIT |
| * |=============================| ------------ |
|MEMBER 46 * | IS COLDFORMED SECTIONS | AX = 1.1 |
| * | PRI SMAT | --Z AY = 1.0 |
|DESIGN CODE * | | AZ = 1.0 |
| IS-800 * =============================== SY = 0.2 |
| * SZ = 0.2 |
| * |<---LENGTH (ME= 1.18 --->| RY = 0.3 |
|************* RZ = 0.3 |
| |
| 0.0( KN-METR) |
|PARAMETER |L0 L0 STRESSES |
|IN NEWT MM |L0 L0 IN NEWT MM|
|--------------- +L0 L0 -------------|
| KL/R-Y= 392.0 |L0 L0 FA = 7.7 |
| KL/R-Z= 392.0 +L0 L0 fa = 0.0 |
| UNL = 1176.0 |L0 L0 FCZ = 0.0 |

57
| C = 400.0 +L0 L0 FTZ = 0.0 |
| CMY = 0.00 |L0 L0 FCY = 0.0 |
| CMZ = 0.00 +L0 L0 FTY = 0.0 |
| FYLD = 415.0 |L0 L0 fbz = 0.0 |
| NSF = 1.0 +---+---+---+---+---+---+---+---+---+---| fby = 0.0 |
| DFF = 0.0 0.0 FV = 0.0 |
| dff = 0.0 ABSOLUTE MZ ENVELOPE fv = 0.0 |
| (WITH LOAD NO.) |
| |
| MAX FORCE/ MOMENT SUMMARY ( KN-METR) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 1.2 0.0 0.0 0.0 0.0 |
| LOADING 5 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY ( KN-METR) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS COMPRESSION 0.003 4 |
| 0.00 C 0.0 0.0 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 80

STAAD.PRO CODE CHECKING - (IS-800 )

********************************************

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CM UNIT |
| * |=============================| ------------ |
|MEMBER 47 * | IS COLDFORMED SECTIONS | AX = 1.1 |
| * | PRI SMAT | --Z AY = 1.0 |
|DESIGN CODE * | | AZ = 1.0 |
| IS-800 * =============================== SY = 0.2 |
| * SZ = 0.2 |
| * |<---LENGTH (ME= 1.18 --->| RY = 0.3 |
|************* RZ = 0.3 |
| |
| 0.0( KN-METR) |
|PARAMETER |L0 L0 STRESSES |
|IN NEWT MM |L0 L0 IN NEWT MM|
|--------------- +L0 L0 -------------|
| KL/R-Y= 392.0 |L0 L0 FA = 7.7 |
| KL/R-Z= 392.0 +L0 L0 fa = 0.0 |
| UNL = 1176.0 |L0 L0 FCZ = 0.0 |
| C = 400.0 +L0 L0 FTZ = 0.0 |
| CMY = 0.00 |L0 L0 FCY = 0.0 |
| CMZ = 0.00 +L0 L0 FTY = 0.0 |
| FYLD = 415.0 |L0 L0 fbz = 0.0 |
| NSF = 1.0 +---+---+---+---+---+---+---+---+---+---| fby = 0.0 |
| DFF = 0.0 0.0 FV = 0.0 |
| dff = 0.0 ABSOLUTE MZ ENVELOPE fv = 0.0 |
| (WITH LOAD NO.) |
| |
| MAX FORCE/ MOMENT SUMMARY ( KN-METR) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |

58
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 5 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY ( KN-METR) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS COMPRESSION 0.005 5 |
| 0.00 C 0.0 0.0 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 81

STAAD.PRO CODE CHECKING - (IS-800 )

********************************************

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CM UNIT |
| * |=============================| ------------ |
|MEMBER 64 * | IS COLDFORMED SECTIONS | AX = 1.1 |
| * | PRI SMAT | --Z AY = 1.0 |
|DESIGN CODE * | | AZ = 1.0 |
| IS-800 * =============================== SY = 0.2 |
| * SZ = 0.2 |
| * |<---LENGTH (ME= 1.18 --->| RY = 0.3 |
|************* RZ = 0.3 |
| |
| 0.0( KN-METR) |
|PARAMETER |L0 L0 STRESSES |
|IN NEWT MM |L0 L0 IN NEWT MM|
|--------------- +L0 L0 -------------|
| KL/R-Y= 392.0 |L0 L0 FA = 7.7 |
| KL/R-Z= 392.0 +L0 L0 fa = 0.0 |
| UNL = 1176.0 |L0 L0 FCZ = 0.0 |
| C = 400.0 +L0 L0 FTZ = 0.0 |
| CMY = 0.00 |L0 L0 FCY = 0.0 |
| CMZ = 0.00 +L0 L0 FTY = 0.0 |
| FYLD = 415.0 |L0 L0 fbz = 0.0 |
| NSF = 1.0 +---+---+---+---+---+---+---+---+---+---| fby = 0.0 |
| DFF = 0.0 0.0 FV = 0.0 |
| dff = 0.0 ABSOLUTE MZ ENVELOPE fv = 0.0 |
| (WITH LOAD NO.) |
| |
| MAX FORCE/ MOMENT SUMMARY ( KN-METR) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 1.2 0.0 0.0 0.0 0.0 |
| LOADING 4 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY ( KN-METR) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |

59
| PASS COMPRESSION 0.003 5 |
| 0.00 C 0.0 0.0 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 82

STAAD.PRO CODE CHECKING - (IS-800 )

********************************************

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CM UNIT |
| * |=============================| ------------ |
|MEMBER 65 * | IS COLDFORMED SECTIONS | AX = 1.1 |
| * | PRI SMAT | --Z AY = 1.0 |
|DESIGN CODE * | | AZ = 1.0 |
| IS-800 * =============================== SY = 0.2 |
| * SZ = 0.2 |
| * |<---LENGTH (ME= 1.18 --->| RY = 0.3 |
|************* RZ = 0.3 |
| |
| 0.0( KN-METR) |
|PARAMETER |L0 L0 STRESSES |
|IN NEWT MM |L0 L0 IN NEWT MM|
|--------------- +L0 L0 -------------|
| KL/R-Y= 392.0 |L0 L0 FA = 7.7 |
| KL/R-Z= 392.0 +L0 L0 fa = 0.0 |
| UNL = 1176.0 |L0 L0 FCZ = 0.0 |
| C = 400.0 +L0 L0 FTZ = 0.0 |
| CMY = 0.00 |L0 L0 FCY = 0.0 |
| CMZ = 0.00 +L0 L0 FTY = 0.0 |
| FYLD = 415.0 |L0 L0 fbz = 0.0 |
| NSF = 1.0 +---+---+---+---+---+---+---+---+---+---| fby = 0.0 |
| DFF = 0.0 0.0 FV = 0.0 |
| dff = 0.0 ABSOLUTE MZ ENVELOPE fv = 0.0 |
| (WITH LOAD NO.) |
| |
| MAX FORCE/ MOMENT SUMMARY ( KN-METR) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 5 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY ( KN-METR) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS COMPRESSION 0.003 5 |
| 0.00 C 0.0 0.0 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 83

STAAD.PRO CODE CHECKING - (IS-800 )

********************************************

60
|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CM UNIT |
| * |=============================| ------------ |
|MEMBER 82 * | IS COLDFORMED SECTIONS | AX = 1.1 |
| * | PRI SMAT | --Z AY = 1.0 |
|DESIGN CODE * | | AZ = 1.0 |
| IS-800 * =============================== SY = 0.2 |
| * SZ = 0.2 |
| * |<---LENGTH (ME= 1.18 --->| RY = 0.3 |
|************* RZ = 0.3 |
| |
| 0.0( KN-METR) |
|PARAMETER |L0 L0 STRESSES |
|IN NEWT MM |L0 L0 IN NEWT MM|
|--------------- +L0 L0 -------------|
| KL/R-Y= 392.0 |L0 L0 FA = 7.7 |
| KL/R-Z= 392.0 +L0 L0 fa = 0.0 |
| UNL = 1176.0 |L0 L0 FCZ = 0.0 |
| C = 400.0 +L0 L0 FTZ = 0.0 |
| CMY = 0.00 |L0 L0 FCY = 0.0 |
| CMZ = 0.00 +L0 L0 FTY = 0.0 |
| FYLD = 415.0 |L0 L0 fbz = 0.0 |
| NSF = 1.0 +---+---+---+---+---+---+---+---+---+---| fby = 0.0 |
| DFF = 0.0 0.0 FV = 0.0 |
| dff = 0.0 ABSOLUTE MZ ENVELOPE fv = 0.0 |
| (WITH LOAD NO.) |
| |
| MAX FORCE/ MOMENT SUMMARY ( KN-METR) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 1.2 0.0 0.0 0.0 0.0 |
| LOADING 4 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY ( KN-METR) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS COMPRESSION 0.003 5 |
| 0.00 C 0.0 0.0 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 84

STAAD.PRO CODE CHECKING - (IS-800 )

********************************************

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CM UNIT |
| * |=============================| ------------ |
|MEMBER 83 * | IS COLDFORMED SECTIONS | AX = 1.1 |
| * | PRI SMAT | --Z AY = 1.0 |
|DESIGN CODE * | | AZ = 1.0 |
| IS-800 * =============================== SY = 0.2 |
| * SZ = 0.2 |
| * |<---LENGTH (ME= 1.18 --->| RY = 0.3 |
|************* RZ = 0.3 |
| |
| 0.0( KN-METR) |

61
|PARAMETER |L0 L0 STRESSES |
|IN NEWT MM |L0 L0 IN NEWT MM|
|--------------- +L0 L0 -------------|
| KL/R-Y= 392.0 |L0 L0 FA = 7.7 |
| KL/R-Z= 392.0 +L0 L0 fa = 0.0 |
| UNL = 1176.0 |L0 L0 FCZ = 0.0 |
| C = 400.0 +L0 L0 FTZ = 0.0 |
| CMY = 0.00 |L0 L0 FCY = 0.0 |
| CMZ = 0.00 +L0 L0 FTY = 0.0 |
| FYLD = 415.0 |L0 L0 fbz = 0.0 |
| NSF = 1.0 +---+---+---+---+---+---+---+---+---+---| fby = 0.0 |
| DFF = 0.0 0.0 FV = 0.0 |
| dff = 0.0 ABSOLUTE MZ ENVELOPE fv = 0.0 |
| (WITH LOAD NO.) |
| |
| MAX FORCE/ MOMENT SUMMARY ( KN-METR) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 5 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY ( KN-METR) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS COMPRESSION 0.003 5 |
| 0.00 C 0.0 0.0 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 85

STAAD.PRO CODE CHECKING - (IS-800 )

********************************************

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CM UNIT |
| * |=============================| ------------ |
|MEMBER 100 * | IS COLDFORMED SECTIONS | AX = 1.1 |
| * | PRI SMAT | --Z AY = 1.0 |
|DESIGN CODE * | | AZ = 1.0 |
| IS-800 * =============================== SY = 0.2 |
| * SZ = 0.2 |
| * |<---LENGTH (ME= 1.18 --->| RY = 0.3 |
|************* RZ = 0.3 |
| |
| 0.0( KN-METR) |
|PARAMETER |L0 L0 STRESSES |
|IN NEWT MM |L0 L0 IN NEWT MM|
|--------------- +L0 L0 -------------|
| KL/R-Y= 392.0 |L0 L0 FA = 7.7 |
| KL/R-Z= 392.0 +L0 L0 fa = 0.0 |
| UNL = 1176.0 |L0 L0 FCZ = 0.0 |
| C = 400.0 +L0 L0 FTZ = 0.0 |
| CMY = 0.00 |L0 L0 FCY = 0.0 |
| CMZ = 0.00 +L0 L0 FTY = 0.0 |
| FYLD = 415.0 |L0 L0 fbz = 0.0 |
| NSF = 1.0 +---+---+---+---+---+---+---+---+---+---| fby = 0.0 |
| DFF = 0.0 0.0 FV = 0.0 |
| dff = 0.0 ABSOLUTE MZ ENVELOPE fv = 0.0 |

62
| (WITH LOAD NO.) |
| |
| MAX FORCE/ MOMENT SUMMARY ( KN-METR) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 1.2 0.0 0.0 0.0 0.0 |
| LOADING 5 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY ( KN-METR) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS COMPRESSION 0.003 4 |
| 0.00 C 0.0 0.0 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 86

STAAD.PRO CODE CHECKING - (IS-800 )

********************************************

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CM UNIT |
| * |=============================| ------------ |
|MEMBER 101 * | IS COLDFORMED SECTIONS | AX = 1.1 |
| * | PRI SMAT | --Z AY = 1.0 |
|DESIGN CODE * | | AZ = 1.0 |
| IS-800 * =============================== SY = 0.2 |
| * SZ = 0.2 |
| * |<---LENGTH (ME= 1.18 --->| RY = 0.3 |
|************* RZ = 0.3 |
| |
| 0.0( KN-METR) |
|PARAMETER |L0 L0 STRESSES |
|IN NEWT MM |L0 L0 IN NEWT MM|
|--------------- +L0 L0 -------------|
| KL/R-Y= 392.0 |L0 L0 FA = 7.7 |
| KL/R-Z= 392.0 +L0 L0 fa = 0.0 |
| UNL = 1176.0 |L0 L0 FCZ = 0.0 |
| C = 400.0 +L0 L0 FTZ = 0.0 |
| CMY = 0.00 |L0 L0 FCY = 0.0 |
| CMZ = 0.00 +L0 L0 FTY = 0.0 |
| FYLD = 415.0 |L0 L0 fbz = 0.0 |
| NSF = 1.0 +---+---+---+---+---+---+---+---+---+---| fby = 0.0 |
| DFF = 0.0 0.0 FV = 0.0 |
| dff = 0.0 ABSOLUTE MZ ENVELOPE fv = 0.0 |
| (WITH LOAD NO.) |
| |
| MAX FORCE/ MOMENT SUMMARY ( KN-METR) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 5 0 0 0 0 |
| |
|**************************************************************************|
|* *|

63
|* DESIGN SUMMARY ( KN-METR) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS COMPRESSION 0.005 5 |
| 0.00 C 0.0 0.0 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 87

STAAD.PRO CODE CHECKING - (IS-800 )

********************************************

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CM UNIT |
| * |=============================| ------------ |
|MEMBER 118 * | IS COLDFORMED SECTIONS | AX = 1.1 |
| * | PRI SMAT | --Z AY = 1.0 |
|DESIGN CODE * | | AZ = 1.0 |
| IS-800 * =============================== SY = 0.2 |
| * SZ = 0.2 |
| * |<---LENGTH (ME= 1.18 --->| RY = 0.3 |
|************* RZ = 0.3 |
| |
| 0.0( KN-METR) |
|PARAMETER |L0 L0 STRESSES |
|IN NEWT MM |L0 L0 IN NEWT MM|
|--------------- +L0 L0 -------------|
| KL/R-Y= 392.0 |L0 L0 FA = 7.7 |
| KL/R-Z= 392.0 +L0 L0 fa = 0.0 |
| UNL = 1176.0 |L0 L0 FCZ = 0.0 |
| C = 400.0 +L0 L0 FTZ = 0.0 |
| CMY = 0.00 |L0 L0 FCY = 0.0 |
| CMZ = 0.00 +L0 L0 FTY = 0.0 |
| FYLD = 415.0 |L0 L0 fbz = 0.0 |
| NSF = 1.0 +---+---+---+---+---+---+---+---+---+---| fby = 0.0 |
| DFF = 0.0 0.0 FV = 0.0 |
| dff = 0.0 ABSOLUTE MZ ENVELOPE fv = 0.0 |
| (WITH LOAD NO.) |
| |
| MAX FORCE/ MOMENT SUMMARY ( KN-METR) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 1.2 0.0 0.0 0.0 0.0 |
| LOADING 5 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY ( KN-METR) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS COMPRESSION 0.002 4 |
| 0.00 C 0.0 0.0 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 88

64
 STAAD.PRO CODE CHECKING - (IS-800 )
********************************************

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CM UNIT |
| * |=============================| ------------ |
|MEMBER 119 * | IS COLDFORMED SECTIONS | AX = 1.1 |
| * | PRI SMAT | --Z AY = 1.0 |
|DESIGN CODE * | | AZ = 1.0 |
| IS-800 * =============================== SY = 0.2 |
| * SZ = 0.2 |
| * |<---LENGTH (ME= 1.18 --->| RY = 0.3 |
|************* RZ = 0.3 |
| |
| 0.0( KN-METR) |
|PARAMETER |L0 L0 STRESSES |
|IN NEWT MM |L0 L0 IN NEWT MM|
|--------------- +L0 L0 -------------|
| KL/R-Y= 392.0 |L0 L0 FA = 7.7 |
| KL/R-Z= 392.0 +L0 L0 fa = 0.0 |
| UNL = 1176.0 |L0 L0 FCZ = 0.0 |
| C = 400.0 +L0 L0 FTZ = 0.0 |
| CMY = 0.00 |L0 L0 FCY = 0.0 |
| CMZ = 0.00 +L0 L0 FTY = 0.0 |
| FYLD = 415.0 |L0 L0 fbz = 0.0 |
| NSF = 1.0 +---+---+---+---+---+---+---+---+---+---| fby = 0.0 |
| DFF = 0.0 0.0 FV = 0.0 |
| dff = 0.0 ABSOLUTE MZ ENVELOPE fv = 0.0 |
| (WITH LOAD NO.) |
| |
| MAX FORCE/ MOMENT SUMMARY ( KN-METR) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 5 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY ( KN-METR) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS COMPRESSION 0.005 5 |
| 0.00 C 0.0 0.0 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 89

STAAD.PRO CODE CHECKING - (IS-800 )

********************************************

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CM UNIT |
| * |=============================| ------------ |
|MEMBER 182 * | IS COLDFORMED SECTIONS | AX = 1.1 |
| * | PRI SMAT | --Z AY = 1.0 |
|DESIGN CODE * | | AZ = 1.0 |

65
| IS-800 * =============================== SY = 0.2 |
| * SZ = 0.2 |
| * |<---LENGTH (ME= 1.18 --->| RY = 0.3 |
|************* RZ = 0.3 |
| |
| 0.0( KN-METR) |
|PARAMETER |L0 L0 STRESSES |
|IN NEWT MM |L0 L0 IN NEWT MM|
|--------------- +L0 L0 -------------|
| KL/R-Y= 392.0 |L0 L0 FA = 7.7 |
| KL/R-Z= 392.0 +L0 L0 fa = 0.0 |
| UNL = 1176.0 |L0 L0 FCZ = 0.0 |
| C = 400.0 +L0 L0 FTZ = 0.0 |
| CMY = 0.00 |L0 L0 FCY = 0.0 |
| CMZ = 0.00 +L0 L0 FTY = 0.0 |
| FYLD = 415.0 |L0 L0 fbz = 0.0 |
| NSF = 1.0 +---+---+---+---+---+---+---+---+---+---| fby = 0.0 |
| DFF = 0.0 0.0 FV = 0.0 |
| dff = 0.0 ABSOLUTE MZ ENVELOPE fv = 0.0 |
| (WITH LOAD NO.) |
| |
| MAX FORCE/ MOMENT SUMMARY ( KN-METR) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 1.2 0.0 0.0 0.0 0.0 |
| LOADING 4 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY ( KN-METR) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS COMPRESSION 0.003 5 |
| 0.00 C 0.0 0.0 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|
STAAD SPACE -- PAGE NO. 90

STAAD.PRO CODE CHECKING - (IS-800 )

********************************************

|--------------------------------------------------------------------------|
| Y PROPERTIES |
|************* | IN CM UNIT |
| * |=============================| ------------ |
|MEMBER 185 * | IS COLDFORMED SECTIONS | AX = 1.1 |
| * | PRI SMAT | --Z AY = 1.0 |
|DESIGN CODE * | | AZ = 1.0 |
| IS-800 * =============================== SY = 0.2 |
| * SZ = 0.2 |
| * |<---LENGTH (ME= 1.18 --->| RY = 0.3 |
|************* RZ = 0.3 |
| |
| 0.0( KN-METR) |
|PARAMETER |L0 L0 STRESSES |
|IN NEWT MM |L0 L0 IN NEWT MM|
|--------------- +L0 L0 -------------|
| KL/R-Y= 392.0 |L0 L0 FA = 7.7 |
| KL/R-Z= 392.0 +L0 L0 fa = 0.0 |
| UNL = 1176.0 |L0 L0 FCZ = 0.0 |
| C = 400.0 +L0 L0 FTZ = 0.0 |

66
| CMY = 0.00 |L0 L0 FCY = 0.0 |
| CMZ = 0.00 +L0 L0 FTY = 0.0 |
| FYLD = 415.0 |L0 L0 fbz = 0.0 |
| NSF = 1.0 +---+---+---+---+---+---+---+---+---+---| fby = 0.0 |
| DFF = 0.0 0.0 FV = 0.0 |
| dff = 0.0 ABSOLUTE MZ ENVELOPE fv = 0.0 |
| (WITH LOAD NO.) |
| |
| MAX FORCE/ MOMENT SUMMARY ( KN-METR) |
| ------------------------- |
| |
| AXIAL SHEAR-Y SHEAR-Z MOMENT-Y MOMENT-Z |
| |
| VALUE 0.0 0.0 0.0 0.0 0.0 |
| LOCATION 0.0 0.0 0.0 0.0 0.0 |
| LOADING 5 0 0 0 0 |
| |
|**************************************************************************|
|* *|
|* DESIGN SUMMARY ( KN-METR) *|
|* -------------- *|
|* *|
|* RESULT/ CRITICAL COND/ RATIO/ LOADING/ *|
| FX MY MZ LOCATION |
| ====================================================== |
| PASS COMPRESSION 0.003 5 |
| 0.00 C 0.0 0.0 0.00 |
|* *|
|**************************************************************************|
| |
|--------------------------------------------------------------------------|

************** END OF TABULATED RESULT OF DESIGN **************

162. FINISH

*********** END OF THE STAAD.Pro RUN ***********

**** DATE= NOV 7,2014 TIME= 11:34:14 ****

************************************************************
* For questions on STAAD.Pro, please contact *
* Research Engineers Offices at the following locations *
* *
* Telephone Email *
* USA: +1 (714)974-2500 support@bentley.com *
* CANADA +1 (905)632-4771 detech@odandetech.com *
* UK +44(1454)207-000 support@bentley.com *
* NORWAY +47 67 57 21 30 staad@edr.no *
* SINGAPORE +65 6225-6158 support@bentley.com *
* INDIA +91(033)4006-2021 support@bentley.com *
* JAPAN +81(03)5952-6500 eng-eye@crc.co.jp *
* CHINA +86(411)8479-1166 support@bentley.com *
* THAILAND +66(0)2645-1018/19 support@bentley.com *
* *
* North America support@bentley.com *
* Europe support@bentley.com *
* Asia support@bentley.com *
************************************************************

67
Connection Bolts Design

1 Column to Rafter:

Maximum values obtained from Staad at top of column:

Fx = 9.69 kN
Fy = 3.93 kN

Resultant shear force on bolts = 10.45 kN

Using 2-M12 bolts (HSFG 8.8 grade bolt)

Shear force on each bolt = 5.23 kN

Shear capacity of one bolt = 1.0 x 0.16 x 50.7 /1.2

= 6.76kN

Bearing capacity of bolt = 12 x 2.0 x 0.75 x 410/1000

= 7.4 KN

Hence provide 2-M12 bolts (HSFG 8.8 grade) at top of column

2 Purlin to Rafter:

Maximum force obtained from Staad at purlin to rafter connection:

Fx = 0.05 kN
Fy = 2.56 kN

Shear force on bolts = 0.05 kN

Tensile force on bolts = 2.56 kN

Using 1-M10 bolts (HSFG 8.8 grade bolt),

Shear capacity of one bolt = 1.0 x 0.16 x 33.7 /1.2

= 4.49 kN

Bearing capacity of bolt = 10 x 1.4 x 0.75 x 350/1000

= 3.675 kN
Proof load for M10 bolt = 33.7 kN (HSFG 8.8 grade bolt)
Bolt tension should be less than 0.6 x Proof load = 20.22 kN > 2.6 kN

Hence shear capacity of bolt = 4.49 kN> 0.05kN

68
Hence provide 1-M10bolt (HSFG 8.8 grade bolt) for rafter to purlin conn.

3 Purlin Splice Connection:

Splice connections have been provided at zero moment locations on the purlins. However a
moment of 1.072 kNm has been considered in the design for additional safety.

Maximum force obtained from Staad at purlin splice locations:

Fy = 2.453 kN
Mz = 1.072 kNm

Using 4-M12 bolts (HSFG 8.8 grade bolt) on each side of splice.
Distance between 2 bolt = 145 mm
Shear force on each bolts = 2.453 / 4 = 0.613 kN
Shear force due to moment = (1.072/0.145)/ 2 = 3.7 kN

Total shear force on each bolt = 4.31 kN

Shear capacity of one bolt = 1.0 x 0.16 x 50.7 /1.2

= 6.76 kN

Bearing capacity of bolt = 12 x 1.4 x 0.75 x 350/1000

= 4.41 kN

Hence shear capacity of bolt = 6.76 kN > 4.31 kN

Use Splice Plate 415 X 70 X6 Thk.

Hence provide 4-M12 (HSFG 8.8 grade bolt) on each side of splice.

4 ) Bracing to rafter / Col. Connection

Maximum values obtained from Staad at end of bracing:

Fx = 9.88 kN

Using 2-M12 bolts (HSFG 8.8 grade bolt), at each end of bracing

Shear force on each bolt = 4.94kN

Shear capacity of one bolt = 1.0 x 0.16 x 50.7 /1.2

= 6.76kN

Bearing capacity of bolt = 12 x 2.0 x 0.75 x 410/1000

= 7.38 kN

69
Hence provide 2-M12 (HSFG 8.8 grade bolt) at each end of bracing

70