Surge Testers: TRA-and MIG-System
Surge Testers: TRA-and MIG-System
Surge Testers: TRA-and MIG-System
Surge Testers
Um 100 % Um 90 %
50% Um
Um 10 % 6,5 s 700 s
Rise time: Ts=4 s 20% Half value time: Tr = 300 s 20%
t s
Im
Im 100 % Im 90 %
50% Im
Im 10 %
1,2 s 50 s
A]
100% 90%
Rise time: Ts=8 s 20% Half value time: Tr = 20 s 20% Under swing: < 30 % 50%
10% 8 s 20 s <30%
100% 90%
Combination waves or Hybrid, are used in a wide range of test application. The most common use is to simulate lightning impulses onto the public single or three phase supply. The current and voltage waveforms are de2 fined in IEC 61000-4-5 and ANSI C62.41
10 s 20%
10%
t
,5 s
2 2 12 30
Note: x is an open class. This level can be specified in the product specification.
Installation class
Coupling mode
Line to Line kV Line to ground kV
Coupling mode
Line to line kV Line to ground kV
Coupling mode
Line to line kV Line to ground kV
Coupling mode
line to line kV line to ground kV
0 1 2 3 4 5 x N.T. 0.5 1.0 2.0 *) 0.5 1.0 2.0 4.0 *) N.T. 0.5 1.0 2.0 2.0
High voltage circuit - Voltage (oc): 1.2/50 s - Current (cs): 8/20 s - Repetition rate maximum: 10/min - Source Impedance: 2 Ohm 10% . - Source energy: 220 Joule at 6 kV - Vpeak range 0.25 up to 6 kV 10% - Ipeak range 0.125 up to 3 kA 10% - Measurement accuracy 3% (v,i) - CDN single-phase 260V 16 A - Coupling path L to N, 18 F - Coupling path L-PE, 9 F and 10 Ohm
MIG0603IN3
High voltage circuit - Voltage (oc): 10/700 s - Current (cs): 4/300 s, 40 Ohm - Repetition rate maximum: 4/min - Impulse capcitance: 20 F . - Source energy: 440 Joule at 6 kV - Vpeak range 0.25 up to 6 kV 10% - Ipeak range 0.125 up to 3 kA 10% - Measurement accuracy 3% - Damping resistor 25 Ohm - Serial resistor 15 Ohm
Basic data Dimensions: 450 x 500 x 190 mm Weight: approx. 28 kg Power supply: 230 V or 115 V, 400 VA 4
Basic data Dimensions: 450 x 500 x 190 mm Weight: approx. 25 kg Power supply: 230 V or 115 V, 400 VA
MIG1206
Application The three-phase coupling filter CDN-MIG1232 can be used up to 12 kV and 6 kA. Power supply three-phase up to 440 V per phase and 32 A per phase High voltage circuit - Voltage (oc): 1.2/50 s - Current (cs): 8/20 s - Repetition rate maximum: 10/min - Source Impedance: 2 Ohm 10% . - Source energy: 880 Joule at 12 kV - Vpeak range 0.5 up to 12 kV 10% - Ipeak range 0.25 up to 6 kA 10% - Measurement accuracy 3% (v,i) - CDN three-phase 440V 32 A - Coupling path L to N, 18 F - Coupling path L-PE, 9 F and 10 Ohm - Two boxes solution, which allows to use the MIG1206 together with the test cabinet TC-MIG24 for component testing. - Coupling paths switching manual
Application - Surge protective devices (SPD) or varistor testing - Surge superimposed on power supply High voltage circuit - Voltage (oc): 1.2/50 s - Current (cs): 8/20 s - Repetition rate maximum: 10/min - Source Impedance: 2 Ohm10% . - Source energy: 220 Joule at 6 kV - Vpeak range 0.5 up to 12 kV 10% - Ipeak range 0.25 up to 6 kA 10% - Measurement accuracy 3% (v,i) - CDN single-phase 250 V 16 A - Coupling path L to N, 18 F - Coupling path L-PE, 9 F and 10 Ohm 5
High voltage circuit - Rise time: 500 ns 30 % - Frequencies: 100 kHz 10% - Repetition rate maximum: 10/min - Decaying: 60% first to second peak - Impedance:12, 30 Ohm - Vpeak range 0.25 up to 6 kV 10% - Ipeak range 0.125 up to 3 kA 10% - Measurement accuracy 3% - CDN single-phase 260V 16 A - Coupling 12 Ohm, 10 F - Coupling 30 Ohm, 3 F
I/O and data line coupling kits CDN2000A-06-32 - Automatically coupling paths switsching for surge, ring wave and EFT - Control of the CDN2000A-06-32 with TRA2000, TRA2000INx and MIG0603INx
CDN-KIT1000T for ISDN balanced lines - Two coupling circuits - Two decoupling circuits
Basic data Dimensions: 450 x 500 x 190 mm Weight: approx. 30 kg Power supply: 230 V or 115 V, 400 VA
Immunity Tests
The TRA2000 performs all of the following transient tests on electronic equipment that are required for the CE-mark up to full levels: ESD, EFT, surge, dips, a.c. magnetic field, surge magnetic field and common mode tests. A large range of accessories for different applications is available: MF antennas, three phase couplers, verification sets, coupling kits, etc. The TRA2000 complies with IEC 61000-4-2, -4, -5, -8, -9, -11, -12p, -16, -29p. The Modular Impulse Generator (MIG) performs damped oscillatory tests: 100 kHz, 1 MHz, voltage and magnetic field tests. The MIG complies with IEC 61000-4-8, -9, -10, -12 as well as with IEC 60255-4, -5, -22. The HAR1000 with the Immunity software performs the following tests: harmonics, voltage variation and ripple on d.c. The HARMONICS-1000 complies with IEC 61000-4-13, -14, -17, -29p.
Component Tests
EMC PARTNER offers a wide range of modular impulse generators (MIG) for transient component testing on: varistors, arresters, surge protective devices (SPD), capacitors, circuit breakers, watt-hour meters, protection relays, insulation material, suppressor diodes, connectors, chokes, fuses, resistors, emc-gaskets, cables, etc. EMC PARTNER has the largest range of impulse generators in the range up to 100 kV and 100 kA. Below is an example for an insulation tester up to 24 kV.
Emission Measurements
One unit performs all measurements on the power supplies of electronic equipment and products for the CE-Mark. The HAR1000 includes an amplifier for a clean power source, a line impedance network, the measurement systems Harmonics and Flicker. Accessories: three phase extension, Immunity and ANASIM software. Complies with IEC 61000-3-2 and -3. 7
Lightning Tests
EMC PARTNER offers a wide range of testers in accordance with FCC 68 part D, ITU K.44, ETS 300 046, Bellcore and RTCA DO-160D, etc. for telecom, aircraft and military electronic equipment testing.
EMC PARTNER offers the largest range of impulse test equipment up to 100 kA and 100 kV in the areas of: Immunity Tests Lightning Tests Component Tests Emission Measurements